SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " pari " 1,945 found 🔀 AI-powered Shuffle
Kickstarter campaign aims to help popular Castro Valley toy store fight October closure
The Prize Booth, a popular toy store in Castro Valley, is preparing to close by October after losing its lease. It has prompted a surge of community support as owners race to find a new location before the holiday season.
The twisted science and traps in framing Notre Dame’s best QBs of the past 50 years
Comparing Notre Dame QBs across eras isn't easy. Stats, titles and context all complicate the debate as CJ Carr begins building his legacy.
NVIDIA Blackwell-Next name spotted in Linux kernel patch
NVIDIA engineers are already preparing Linux support for hardware listed as “Blackwell-Next.” The name appears in a Linux kernel patch for the NVGrace-GPU VFIO…
France restricts public drinking and outdoor sports as heat wave bakes parts of Europe
The Eiffel Tower and other Paris venues set up misting stations to cool crowds, among a raft of measures introduced by authorities to minimize risks. Tourists in Rome dunked in fountains. Spain’s Basque Country canceled some sports and cultural events.
California braces for one of the biggest tax hikes in the last decade
California lawmakers and the governor this year are preparing to implement major tax hikes in a matter of weeks, representing one of the largest tax increases in the state within the last decade.
France restricts public alcohol consumption and outdoor sports as heat wave bakes parts of Europe
PARIS (AP) — France is putting emergency services and military forces on wildfire alert, restricting public alcohol consumption and canceling some outdoor sports events to cope with a heat wave unfurling across parts of Europe.
France arrests 20 after banning rally against political executions in Iran
Paris protest goes ahead despite the ban, which French foreign ministry insists isn't linked to FM's call with his Iranian counterpart
Does low primary voter turnout indicate low general election turnout?
Election officials and poll workers across the Empire State are preparing for Tuesday for whoever wants to cast their ballot.
Comparing the mood of America’s 250th anniversary with its 200th in 1976
As the United States celebrates the 250th anniversary of its founding, a look back five decades to 1976 — the year of the nation’s bicentennial — reveals notable similarities with today.
Philadelphia-area STI disparities still fueled by stigma and misinformation, health care leaders say
At a Philadelphia panel on HIV and health equity, experts pointed to gaps in education, funding and access to care.
‘Stranger Things,’ ‘Emily in Paris’ Outperform IP Rivals in Dentsu Fandom Intelligence Study
Streaming titles including “Stranger Things,” “Emily in Paris” and “Wednesday” outperform the average across all entertainment IP tested by 30% when it comes to converting fans into buyers, according ...
Trump finds his Iran off-ramp in Versailles, but saves the big issues for later: From the Politics Desk
Plus, comparing the Trump and Obama deals with Iran.
Epic Games Launcher V2 promises 5x faster launch and 6.5x faster library restore
Launcher V2 public release appears on the 12-month roadmap. Epic Games is preparing a major redesign of the Epic Games Store and Launcher.
Jeffrey Stokes Named Head of Allied Health Sciences
Throughout his career, Stokes has emphasized interdisciplinary collaboration and mentorship, as well as faculty development, student success, and preparing ...
Nancy and the politics of deterrence: reading the French nuclear offer to Poland
A year after the Nancy Treaty, Polish-French defence cooperation is deepening and building a tangible element of European deterrence. The question is what kind of relationship Warsaw and Paris are actually building, and whether it will outlast the leaders who started it.
How Sweden’s far right went from political pariah to powerbroker
Once shunned by every major party, the Sweden Democrats have gone from political pariah to the heart of government.
Apple Prepares Second-Generation iPhone Air for Spring 2027
Apple Inc. is preparing a second-generation iPhone Air for spring 2027, aiming to boost the appeal of the slimmed-down device, according to people with knowledge of the matter.
Samsung phones are getting a new feature for checking the health of your pets.
During the VivaTech 2026 conference in Paris, Samsung announced a new feature for its mobile devices created through a collaboration with the pet health management platform, Lifet. You’ll be able to snap a photo of your dog or cat which will be analyzed by AI to alert you to conditions like periodontal disease and obesity. [Image: https://platform.theverge.com/wp-content/uploads/sites/2/2026/06/samsung.jpg?quality=90&strip=all]
What hospitals are preparing for during World Cup
Measles? A food poisoning outbreak or a need for lots of CT scans in a hurry? With the World Cup in town, hospitals and public health teams say they're prepared.
Ukraine says even outdated drone tech can work for allies
A Ukrainian official says drone tech that is aging out of his country's fast-moving fight could still help partners preparing for similar attacks.
French Quarter businesses face storm and flood project disruptions
Businesses on Decatur Street in the French Quarter are preparing for heavy rainfall from Invest 90L while dealing with challenges from a flood control project.
Preparing Leaders for the Business of Sports
Cedarville University is expanding access to its sport business management program through a new online degree that prepares students for leadership roles in a...
Preparing Leaders for the Business of Sports
Cedarville University is expanding access to its sport business management program through a new online degree that prepares students for leadership roles in a...
49th Annual Grantsville Days: Three days of fun, entertainment, community spirit
GRANTSVILLE — Grantsville is preparing to come alive as the 49th Annual Grantsville Days returns June 26–28, bringing three days of family-friendly entertainment, community activities, live music, food, and fun
Equip Exposition dials up fun with three nights of epic entertainment
The 2026 entertainment line-up features three nights of back-to-back concerts, receptions, and parties, including a new Thursday evening block party at Louisville’s Paristown Point.
Game-Changing New, Online Master’s in Sport Management and Recreation Therapy
Sport management is a growing industry, and UNC Greensboro is preparing the next generation of leaders to meet the demand. The new fully online Master of Science in Sport Management & Recreational Therapy is designed for working professionals ready to advance their careers in sport, athletics, and recreation. With flexible coursework, real-world experiences, and strong industry connections, students can gain the skills they need to lead without putting their careers on hold.
I spent 48 hours comparing Siri AI to Gemini — and Apple really impressed me
Apple’s new Siri AI finally delivers on its promise. After 48 hours of testing, here’s how it compares to Gemini.
The Wealth Opportunity Hidden In America's Small Business Transition
Millions of small business owners are preparing to exit. Discover why acquisition entrepreneurship is creating a new generation of business buyers.
UToledo Earns National Recognition for Preparing Future Teachers in Science of Reading
Undergraduate and graduate early childhood education degree programs achieved top marks in a new report from the National Council on Teacher Quality.
Video of Patriots rookie Gabe Jacas training surfaces amid controversy
With Gabe Jacas' contract status still in question, the rookie second-round pick is preparing away from the team for the 2026 season.
With 2 New Sports, Special Olympics To Get Underway
For the first time in years, thousands of athletes with disabilities are preparing to come together from across the country for a week of competition and much of it will be broadcast.
Arizona Cardinals OL Paris Johnson, Isaac Seumalo have simple communication
Cardinals LT Paris Johnson details how he and new LG Isaac Seumalo communicate on the field.
Beer sales surge in Boston after first home World Cup match
Pubs and liquor stores are reporting busier-than-normal weekends. Scottish visitors drank a lot of beer, and businesses are preparing for the week ahead.
Jaguars roster: Jakobi Meyers ready for full season in Jacksonville
Jakobi Meyers quickly became a key contributor in Jacksonville. Now he'll enter training camp preparing for his first full season with the Jaguars.
Equip Expo adds new Paristown block party to its 2026 entertainment lineup
Entertainment includes a Welcome Reception at Churchill Downs, a Fourth Street Live concert with The Crashers and a new Paristown Block Party.
Jim Acosta ruthlessly mocked for comparing removal of Trump’s name from Kennedy Center to fall of Berlin Wall
Jim Acosta live-streamed for nearly 11 hours awaiting the removal of Trump's name from the Kennedy Center, then compared it to the Berlin Wall falling.
The shifting landscape for Black-owned businesses: An update to the Black Business Parity Dashboard
The latest Black Business Parity Dashboard reveals where Black-owned employer businesses are growing, where ownership gaps persist, and how closing those gaps could generate jobs, wages, and economic growth nationwide.
Our Lady of the Lake Primary Care clinic expansion gets building permit, plus more in Baton Rouge
Here are the building permits issued by East Baton Rouge Parish government for the week of June 8-12
Edward Jones Expands Workplace Retirement Solutions for Business Owners and Their Employees
With new products, investments and product partners, Edward Jones is helping business owners support employees while preparing for their own financial futures....
Equip Exposition Dials Up Fun With Three Nights of Epic Entertainment For Attendees
/PRNewswire/ -- Equip Exposition, the award-winning international landscape, outdoor living, and equipment exposition trade show, announced today its 2026...
Diomande shows Iraola what the fuss is about
The task of filling the huge vacancy left by Mohamed Salah will be right at the top of Andoni Iraola's tasks when he settles behind his desk at Liverpool. RB Leipzig's 19-year-old Yan Diomande has been the name on the lips of many as the target to take the place of the 'Egyptian king'. Hs is one of Europe's hottest properties and showed exactly why Liverpool are being heavily touted - along with back-t0-back Champions League winners Paris St-Germain - as his next destination with a man-of-the-match performance rich in promise in Ivory Coast's 1-0 victory over Ecuador.
Tottenham join race for Moroccan wonderkid after World Cup debut
Saturday afternoon saw the 2026 FIFA World Cup usher in one of the names for the future into the global game, Morocco's Ayyoub Buaddi, with the wonderkid playing a large part of his national team's draw against perennial powerhouse Brazil. It was just more than just a debut, as it showed that Bouaddi can perform on the global stage against some of the best players in the world, emboldening the interest that teams had in him following his stellar campaign with Lille in Ligue 1, winning out on 49 tackles and recording 33 interceptions last season for the French outfit. All in all, the Moroccan wonderkid has been looked at and is being closely followed by the likes of Arsenal, Liverpool, and Paris-Saint Germain, amongst others, but according to a recent report, yet another English club is pursuing the 18-year-old.
Ousmane Dembélé nearing PSG contract extension
Ousmane Dembélé (29) is close to signing a contract extension at Paris Saint-Germain, according to a report from RMC Sport. There have been doubts regarding Dembélé’s continuation at PSG beyon...
Politics, Pubs, Parades, and the Parish: Joan Quigley, Part II
Former Assemblywoman Joan Quigley reflects on her legislative accomplishments, including helping pass New Jersey’s DNA evidence law.
Is SMIC N+3’s Metal Pitch Smaller than Intel 18A’s?
Almost four years ago, we published that SMIC had started shipping 7 nm (N+1) chips. Now, SMIC is shipping its third-generation 7 nm (N+3) process in Huawei’s Kirin 9030, with a minimum metal pitch of 32.5 nm, about 10% tighter than the 36 nm minimum metal pitch shipping in Intel’s latest Panther Lake CPUs on 18A. The headline is true, but incomplete cherry picked metric. N+3 reaches the density of TSMC N6 through aggressive DUV multi-patterning and design-technology co-optimization (DTCO), but it pays for that in complexity, efficiency and process control. We found this and more in our reverse engineering and teardown where we cover SMIC’s N3 process technology, Huawei’s packaging, memory, architecture, and more. SemiAnalysis has been building a state-of-the-art teardown lab in Oregon capable of analyzing the world’s most advanced and important chips over the last year and half. We have already generated revenue on advanced datacenter chip teardowns including our recent reverse engineering of a major TSMC customer’s COUPE CPO optical engine + EIC 3D stack. This is the first public report from the SemiAnalysis Teardown Engineering & Evaluation Lab, or STEEL for short. The lab is aggressively scaling up and out and we’re excited to announce it publicly. This is a bit of inconvenient timing for TechInsights as they are private equity owned and currently being sold while having enjoyed virtually no credible competition for decades. This has led to TechInsights underinvesting in CAPEX. SemiAnalysis exceeds TechInsights in revenue despite no venture or private equity ownership and being founded only 6 years ago. Because we have no external investors and are founder led, we move faster, build faster, and we can release client chip teardowns for free regularly, while focusing on datacenter for our major clients. Here’s the first public image from our lab, the HiSilicon Kirin 9030 Pro SoC: This report will detail our teardown of the Kirin 9030 and our findings on SMIC’s N+3 process, the most advanced in China. For comparison, we’ll show our teardown of the MediaTek Helio G99, made on TSMC N6. Through this comparison, we can look at the effect of export controls – SMIC N+3 and TSMC N6 are comparable nodes, but one is heavily export-controlled, the other free to use the West’s most advanced equipment. Here we see both China’s progress and constraints. SMIC N+3 reaches TSMC N6-class logic density, but it requires far more aggressive DUV multi-patterning, so it does not match N6 on process maturity or cost. The Kirin 9030 Pro performs similarly to three-year-old Android flagships, and trails far behind the current flagship SoCs from Apple, Qualcomm, MediaTek, and Samsung. The efficiency gap is even wider. Export controls have not stopped Huawei and SMIC from shipping advanced silicon, but they have forced a different path. Without EUV, SMIC is leaning harder on DUV multi-patterning, DTCO, and increasingly complex integration. The roadmap continues forward through tighter design rules and backside power, but each step adds cost and process risk. Huawei’s τ scaling and LogicFolding show another path: stacking active logic and recovering density through advanced packaging and system-technology co-optimization (STCO). To understand the Kirin 9030, we must first understand Huawei’s SoC history. HiSilicon is Huawei’s chip design arm, responsible for the Kirin smartphone SoCs, Kunpeng server CPUs, Ascend AI accelerators, and switch/router networking silicon. Before export controls, Huawei was TSMC’s largest customer – the only customer on TSMC’s first EUV node, N7+, and among the first on N5, alongside Apple. That ended in late 2020. Huawei switched to Qualcomm SoCs in its flagship smartphones, though export controls limited them to 4G-only variants. In late 2023, Huawei returned to in-house silicon with the Kirin 9000s, a successor to the Kirin 9000, fabricated on SMIC N+2 instead of TSMC N5. In the following years, they released the Kirin 9010 and 9020 on the same N+2 process. These chips used Huawei’s in-house TaiShan CPU cores and Maleoon GPU. We have not torn down a Kirin 9020 ourselves, so the predecessor die shot is from Kurnal. The die shots show how Huawei spent its silicon budget: which functional blocks are where, and how their areas compare to the predecessor. First, a quick guide to the major blocks on the die. The total die area is nearly identical, but the 9030 uses that area more aggressively. A denser process lets Huawei fit an extra middle CPU core, more GPU and NPU cores, and larger caches into the same footprint. In contrast, the Helio G99 is a much smaller, low-cost SoC, built for budget smartphones rather than a flagship device. While the Kirin 9030 is ~140 mm², the G99 is only ~29 mm², roughly one-fifth the area. The underlying TSMC process technology, however, is directly comparable as a baseline for analyzing SMIC’s. The Kirin 9030 is an evolutionary refresh, not a clean-sheet design. Its CPU, GPU and NPU cores carry over the 9020’s families, and the gains come from three levers: the SMIC N+2-to-N+3 process step, DTCO and floorplan work, and incremental microarchitecture. Area is where the first two show up, and the 9030 scales well here. Performance and efficiency are the harder test. Huawei’s design holds up better than its node would suggest, but the chip still trails, both because N+3 sits behind the leading-edge nodes and because its cores, while competent, remain a few generations behind the newest designs. The new prime core is an incremental update. The main changes are a 10% frequency increase from 2.5 GHz to 2.75 GHz and a doubling in the L2 cache from 1 MiB to 2 MiB. Despite the increased cache, the core size decreased by 7.6%. Excluding the private L2 cache, the core size decreased by 21%. This is a large reduction for an incremental node. Compared with the TaiShan New V120 core in the Kirin 9020, the Kirin 9030’s middle core is almost unchanged architecturally, yet each core shrinks by ~22%. Most of that comes from the move from N+2 to N+3, with layout likely accounting for the rest. Visually, the most noticeable change is the increase from 3 middle cores to 4. There is also a 20% increase in the shared L3 cache of the big cluster. This helps to improve multi-core performance without sacrificing much in terms of area. Even with each core shrinking, the big CPU cluster’s total area is essentially unchanged. The per-core savings went back into an additional middle core and larger caches. The tiny cores shrank less than the prime core (excluding its L2 cache) and less than the middle cores. This is likely because fixed overhead is a larger share on a small core. We cannot resolve any architectural changes from the die shot alone, but the per-clock and efficiency gains shown below point to more than pure process and layout scaling. The area reduction was offset by a doubling of the shared L2 cache from 2 MiB to 4 MiB, leaving the total tiny CPU cluster area slightly larger. Area is the easiest improvement to see from a die shot, but it is only one part of PPA (power, performance, area). For modern logic, power and performance matter just as much, and often more. Since Dennard scaling broke down in the mid-2000s, voltage and frequency have not scaled in step with transistor dimensions, so each node has had to fight harder for gains in performance and efficiency. The starkest comparison is not Kirin 9020 versus Kirin 9030 Pro. Apple’s efficiency cores run circles around Huawei’s prime core. Apple’s low-power core delivers 20% higher integer performance while drawing only 1 W, compared with 4.5 W for Huawei’s prime core. N+3 matches TSMC N6, but N6 is several generations old. Apple and Qualcomm build on N4 and N3P, which are denser and sit on a better voltage-frequency curve, giving them a larger transistor budget and more performance per watt. The 9030’s own cores did improve. The middle and tiny cores gained 17% and 14% in per-clock integer performance over the 9020, with floating-point flat on the middle core and up 11% on the tiny. The tiny core improves cleanly, with performance rising while power falls and efficiency increases by 45% in integer and 24% in floating point. The middle core is mixed: integer performance rises but power rises faster, cutting integer efficiency by 7%, while lower power lifts floating-point efficiency 16%. Per-clock gains at the same or lower frequency are microarchitectural, so the cores are tuned, not just shrunk. Both also failed to hold their rated maximum frequencies, pointing to thermal, power, or stability limits. Per clock, the middle core sits around Arm Cortex-A720 and the tiny core near the Cortex-A520; absolute performance trails because Huawei clocks them much lower. The prime core is roughly Cortex-X2 class per clock, a 2021 design. Apple’s 2020 M1 Firestorm core is still 35% higher per clock and 57% faster in absolute integer performance at a similar 4.5 W. The current leading edge is further ahead again: the Apple M5 P-core is 60% higher per clock and 2.7× faster, the Arm C1 Ultra 45% higher and 2× faster. Matching older high-end cores per clock is a genuine design achievement. What Huawei cannot match is the voltage-frequency curve and transistor budget of leading-edge nodes, which let Apple, Qualcomm and others spend more transistors in the same area on wider cores, larger caches and deeper buffers while running at lower voltage. Huawei’s LogicFolding roadmap is one answer, stacking active logic to recover density and shorten signal paths. We return to it later. The GPU compute units (CUs) changed more visibly than the CPU cores, moving to a more rectangular layout for both the arithmetic logic unit (ALU) clusters and the CU overall. Even with ray-tracing support added, a CU shrank ~28%. However, that shrink is offset by the increase from 4 to 6 CUs and the area outside the CUs grew 33%. Overall, the GPU cluster is larger by ~10%. The GPU is where Huawei makes its biggest gains. The Maleoon 935 is not competitive with current flagships, but it is a large step up from the 920 and reaches older-flagship territory. In 3DMark it is 70% faster in Wild Life Extreme (WLE) and 79% faster in Steel Nomad Light (SNL) than the 920; with 11% higher clocks and 50% more CUs, the ~67% theoretical uplift roughly matches WLE and is beaten by SNL. It edges ahead of the Snapdragon 8+ Gen 1 in WLE and SNL, and the Dimensity 9200 and Apple A16 in WLE, but stays far behind newer parts: the Snapdragon 8 Elite Gen 5 and Dimensity 9500 are ~2.4–2.6× faster in WLE and ~3.2× faster in SNL. The Maleoon 935 is Huawei’s first GPU with hardware-accelerated ray tracing; there it lands slightly ahead of the Exynos 2200, and on par with the Apple A16, with current flagships up to 3.7× faster. The Neural Processing Unit (NPU) saw the largest structural changes of any block, moving from a Lite and a Tiny core in the Kirin 9020 to a Lite and two Tiny cores in the Kirin 9030. Both core types also show significant layout changes. This is a reversal in Huawei’s NPU design. The Kirin 9000 5G, its last flagship chip on TSMC N5, used two Lite and one Tiny core. The series of SoCs on SMIC N+2 moved to one Lite and one Tiny core, likely for area savings. With the Kirin 9030, Huawei has shifted back toward a larger multi-core NPU cluster, but with the additional area going to a Tiny core rather than a Lite core. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Before diving into the process stack, the package and memory are worth separating from the SoC itself. The Pro variant of the Kirin 9030 carries 12 GB of Samsung DRAM, with two stacks of four dies each. The dies were identified as the K4L2E165YD, a 12 Gb LPDDR5X-9600 device fabricated on Samsung’s 1a node, the fourth generation of its 10 nm-class DRAM after 1x, 1y and 1z. 1a has shipped in volume since 2022, so this is current memory rather than older-node inventory. The 16 GB Pro Max variants we obtained were found with both CXMT and Samsung packages. The CXMT package is marked CXDD7JEDM, with two stacks of four dies, packaged in week 45 of 2025. The inferred die dimensions from X-ray computed tomography (CT) are consistent with a known density of ~0.3 Gib/mm² for the CXMT G4 process, roughly equivalent to other manufacturers’ 1z processes. The Kirin 9030 uses a typical integrated package-on-package (iPoP) stack: multiple DRAM dies in a memory package sit above an organic redistribution layer (RDL) interposer, which sits above the SoC and package substrate. The full package is then mounted to the printed circuit board (PCB) through ball-grid array (BGA) solder bumps. The memory package substrate is a thin bismaleimide-triazine (BT) laminate carrying the LPDDR5X stack. The organic RDL interposer over the SoC routes the PoP signals around the die and carries possible dummy thermal copper pillars. The package substrate, a thicker Ajinomoto Build-up Film (ABF) build-up over a BT core, fans the flip-chip bumps out to BGA pitch and embeds the power planes. The whole stack is organic. The only silicon is the SoC and the LPDDR5X dies; there is no silicon interposer. Keeping it all-organic brings the package’s coefficient of thermal expansion (CTE) close to the PCB’s, reducing board-level warpage, and avoids the cost of a silicon interposer the SoC’s bandwidth does not need. In an iPoP stack, the memory package connects to the organic RDL interposer through an array of solder bumps. Underfill fills the gap around those bumps, adding stiffness and protecting the joints from mechanical stress. The Pro and Pro Max variants differ here, which we cover behind the paywall. The die shot and architecture tell us how Huawei allocated its silicon budget. The process tells us what SMIC can manufacture. We use the Helio G99 as the process reference for TSMC N6. Both SMIC N+3 and TSMC N6 are evolutions of previous 7 nm-class nodes. We used targeted TEM cross-sections through logic and memory regions, imaged in both fin-cut and gate-cut directions. Each cross-section caption gives its horizontal field width (HFW), the real width of the imaged area. We start at the transistor fins, then move up through standard cells, local interconnect, and SRAM. SMIC has not overtaken Intel or TSMC. It uses aggressive DUV scaling and DTCO to reach N6-class density, but that density doesn’t translate into comparable performance and efficiency, for two reasons: the node gap to leading-edge nodes, and Huawei’s core designs. Fin Profile One of the most important knobs in a FinFET process is the fin profile: the shape of an individual fin and the channel where current passes from source to drain. The ideal fin is tall, narrow, and nearly vertical. A taller fin increases effective channel width, while a narrower fin improves electrostatic control by thinning the body the gate must control. Push either too far, and the process pays for it: weaker drive current, fragile fins, taper, footing and line-edge variation that hit yield and device variability. The Intel 22 nm, 14 nm, and 10 nm fin cross-sections show how FinFET nodes have improved over time. 22 nm fins were a first-generation structure, relatively short, wide and strongly tapered. The shape limits current density and reduces gate control uniformity across the height of the fin. At 14 nm and 10 nm, Intel pushed the fins taller and narrower while also making the sidewalls more vertical. Rather than shrinking the device, these changes increase the effective channel width per fin and improve electrostatic control. The trade-off is that taller fins at tighter pitches are much more difficult to manufacture. Now, let’s compare the Helio G99 on TSMC N6 with the Kirin 9030 on SMIC N+3. Both processes are in the same class, with fin pitch of 30-32 nm on N+3 and 34 nm in our N6 cross-section. The pitch for N6 is especially interesting as N7’s HD library is generally listed with a 33 nm fin pitch, and N6 did not shrink pitches directly. Its density gains came from DTCO instead of tighter pitches. The 34 nm pitch was stable across our sampled region and serves more as a comparison against the SMIC N+3 we have not investigated further. Pinning down N+3’s fin patterning scheme takes more than one core unit. The CPU cores show a dense ~32 nm pitch, with the pitch between N-P fin pairs alternating between 78 and 88 nm. Logic alone may be consistent with dual-pitch mandrels of 120 and 110 nm, but this is a complex and unusual approach. Combining the pitch from the the 8T SRAM, which has more complex repeat unit, with the CPU core sequence allows us to reverse engineer the patterning steps with more confidence. As both the logic and SRAM should share the same base grid, a single CD mandrel lithography pattern with 128 nm pitch undergoing SAQP produces a die-wide ~32 nm grid (128 nm/4), which supports the pitch sequencing seen in both logic and SRAM cells. In the sampled cross-sections, N+3 shows a taller, narrower, higher-aspect-ratio fin than N6. The measured fin aspect ratio is ~9.5:1 on N+3 versus 7.8:1 on N6. N+3 also shows less top rounding, with an estimated radius of ~2 nm, compared with 2.8 nm on N6. Even though the fin widths differ, the ratio of top rounding to fin width tells the same story, with N+3 at 0.37 and N6 at 0.44. In a geometric sense, lower is better; a perfectly rectangular fin would have no top-rounding penalty. These are single-digit-nanometer features measured from a handful of cuts, so treat the absolute numbers as approximate. The important result is the relative gap: N+3’s fins are consistently taller, narrower and less rounded than N6’s. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Standard Cell A standard cell is the basic building block of chip layout: a fixed-height row pairing one NMOS and one PMOS transistor that share a gate, tiled in a grid to build logic blocks. The key dimensions are contacted gate pitch (CGP), cell height (CH), fin count, and the lower-metal routing grid. To measure density, we use the Bohr metric: a weighted average of NAND2 gate area (60%) and scan flip-flop area (40%). This represents a realistic mix of combinational and sequential logic. This metric has its limitations, especially for complex cell layouts like TSMC’s FinFLEX, which alternates cells with different fin counts. Even so, it is the best metric for a pure process-level comparison. Another important measurement is the fin pitch; it refers to the distance between two fins of the same transistor. In a FinFET process, multiple fins are used in each transistor to increase the drive current and thus performance. TSMC N6 ships both a high-density (HD) library with 2 PMOS and 2 NMOS fins per cell, and a high-performance (HP) library with 3 of each. More fins under the shared gate mean more effective channel width. HP cells switch harder at the cost of area. Designers mix the two on a die, primarily spending HP cells on timing-critical paths, and matching their PPA targets. In the Cortex-A55 core of the Helio G99, we found a cell height of 240 nm for the HD cell. MediaTek has used HD cells in the G99 to minimize die size and thus cost. As an SoC for budget smartphones at ~$100, this is essential. By contrast, we found only one library in the Kirin 9030, with 2 NMOS and 2 PMOS fins. This suggests a narrower library strategy than TSMC N6, where both HD and HP libraries are widely used. This likely reflects the smaller customer base and the more constrained domestic design and electronic design automation (EDA) ecosystem. In all three CPU cores of the Kirin 9030, we found cell heights of 228 nm, 5% smaller than on N6. This is also a reduction of 9.5% over SMIC N+2’s cell height of 252 nm. SMIC N+3 and TSMC N6’s HD library both feature a CGP of 57 nm. For SMIC, this is a 9.5% shrink over N+2. In the past, CGP and cell height alone may have been enough to compare transistor density. Now, however, we must consider scaling boosters and DTCO as well. SMIC’s density gain does not come from EUV. It comes from using every available DTCO booster aggressively. First is fin depopulation: reducing the number of NMOS and PMOS fins in each cell. The first FinFET nodes started with 3 or 4 fins for each transistor. SMIC N+3 and TSMC N6 HD both use only 2 fins per transistor, trading drive strength for density. Next is contact over active gate (COAG). By landing the gate contact directly over the active gate, instead of out over the isolation region, the cell height drops. N+3 integrates COAG while N6 does not. Our N+3 gate-cut cross-sections indicate COAG, with the gate contact sitting over the active region, while N6 shows an off-gate contact. Last is single diffusion break (SDB). Diffusion breaks are inserted between cells in the same row to provide electrical isolation, but they also introduce local layout effects (LLE), layout-dependent shifts in electrical characteristics. In the past, a double diffusion break was used, consuming the space of two CGPs. SMIC N+3 and TSMC N6 instead use SDB, saving area but increasing LLE sensitivity. This must be controlled at the process level and accurately modeled in the process design kit (PDK) so that EDA tools can account for it. Overall, SMIC N+3 has a transistor density of 113.4 MTr/mm², slightly above TSMC N6 at 107.7 MTr/mm². Even without EUV, SMIC has achieved density beyond TSMC’s mature N6 node which utilizes EUV. Metal Stack The smallest critical dimension in the teardown is M0; SMIC N+3 uses a 32.5 nm local metal pitch. That is smaller than the 36 nm M0 pitch on Intel 18A in Panther Lake. However, this does not mean that SMIC has a better process than Intel 18A or TSMC N3P. M0 is a local intra-cell routing layer. Its usefulness depends on the full interconnect stack: M1 and M2 pitch, track count, via and line resistance, design rules, mask count, overlay control, and routing flexibility. The 32.5 nm M0 is consistent with self-aligned quadruple patterning (SAQP), whose four-population line-width loading we read coarsely as alternating widths of 21.5 to 24 nm; M1 and M2, at 38 and 40 nm, are consistent with self-aligned double patterning (SADP), a single A/B split. On TSMC N6, M0, M2, and M3 sit at a relaxed ~40 nm and are consistent with SADP-class double patterning, with no need for quadruple patterning. That said, we measure M2 for example at ~43 nm, likely inflated by sparse routing. We do not assign any specific layer to EUV from our cross-sections; the distinction we can draw is double versus quadruple patterning, not lithography wavelength. Transistor-level density in the front-end-of-line (FEOL) sets an upper bound, but the design is ultimately limited by what the interconnect stack can route. The lowest metals are the most important for standard-cell density, but the semi-global and global layers determine how usable that density is at the block and chip level. Two axes are commonly used for chip cross-sections: the fin-cut and the gate-cut. The micrograph above is a fin-cut and shows metals 0 through 3. This axis lets us see the even-numbered metals, with M0 right above the fins. There are two kinds of M0 lines. The first are the power rails; these are wide wires for the VDD and VSS running horizontally at the top and bottom edges of each standard cell. The wide wires measure 55 nm across, more than double the other M0 lines. Their width minimizes resistance and reduces IR drop. The second kind are intra-cell wires, short segments within the cell that connect terminals to M1. These have alternating widths between 21.5 and 24 nm. The M0 pitch is 32.5 nm, a 19% reduction versus N+2 and N6. At this pitch, DUV patterning requires more aggressive multi-patterning, increasing mask count, overlay sensitivity, process complexity and cost. M0 is below what a single DUV-defined spacer (SADP) can resolve, so SMIC cascades a second spacer step (SAQP). The cross-section reflects the cost: the M0 trenches are visibly more re-entrant (narrower at the bottom than the top) than M1 or M2 on the same chip and carry a bright barrier-rich foot where the trench meets the etch-stop layer. That shape is partly the intended damascene profile, as a slightly narrow bottom helps void-free copper fill, but its magnitude at M0 is driven by the tight pitch and the higher trench aspect ratio. Intel 18A supports an M0 pitch of 32 nm, although Panther Lake has only shipped with a looser 36 nm pitch. This is due to Intel’s heavy usage of HP libraries. Among leading-edge nodes, 18A has the loosest M0 pitches due to PowerVia. With power routing moving to the backside, congestion is reduced, and the entire front-side metal stack can be used for signal routing. M2 is the first true inter-cell routing layer. It runs horizontally like M0 but spans across multiple cells to carry block-level signals. The M2 pitch sets the cell’s track height – the number of M2 tracks that fit between the VDD and VSS rails, defining what the library calls a 6-track or 7.5-track cell. This layer is the most important, limiting the routing of entire blocks. SMIC N+3 features a 5.7-track cell. The M2 pitch is 40 nm, a 5% decrease over N+2 and the same as N6. This shrink keeps the pitch at the edge of what is possible with double patterning. Future nodes will need to increase the number of masks for M2 as reducing the number of tracks is much harder due to the limitations in routing. The micrograph above is in the perpendicular direction, the gate-cut, and shows metals 0 through 4. This allows us to see and measure the odd-numbered vertical metal layers. The M1 pitch is 38 nm, 9.5% less than N+2 and 33% less than N6. The M1-to-gate ratio matters because it sets local routing flexibility. N+2 and N+3 use a 3:2 ratio, while N6 uses a 1:1 ratio, explaining the huge differences in M1 pitch. The more M1 lines there are compared with the gates, the more flexibility there is for power and signal crossing within the cell. Routing flexibility enables more complex and better cells. Clean fractional ratios are also preferred as a grid is periodic and improves layouts. The 3:2 ratio gives SMIC more local routing flexibility than a strict 1:1 grid, but it also complicates layout and patterning. This is a DTCO choice, with SMIC increasing process complexity to recover density and routability without EUV. This 3:2 ratio is not very popular in the leading-edge nodes. TSMC has only used it on N7+, the N5 family, and the short-lived N3(B). They have switched back to a 1:1 ratio for N3E. Intel has only used it on the 10 nm/Intel 7 family, with Intel 4, 3 and 18A all using a 1:1 ratio. Samsung is the only one still using a 3:2 ratio at the leading edge, using it in the SF4 and SF3 families. It remains to be seen if SMIC will remain at a 3:2 ratio or move to a 1:1 ratio with its future nodes. The industry is still actively exploring these local-routing ratios. At VLSI 2026, imec will be presenting work on even higher ratios, including a 2:1 scheme that can reduce area by up to 14%. We will be covering the conference in a future newsletter article. Subscribe We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. The final local interconnect layer for N+3 is M3, with a pitch of 44 nm. The M3 pitch is the same as on N+2 and 10% larger than on N6. The semi-global layers carry the majority of block-level signal routing. They have a coarser pitch than the lower local layers. On leading-edge nodes, they are designed to sit at the limit of DUV single patterning. M4 through M11 pitches were found divided between 80–82 nm (M4–M6), 128 nm (M7–M10), and 148 nm (M11). Given limited sampling, it is possible these are divided further in dense routing areas. At the top are two giant metal layers, M12 and M13. These have kept the same pitches as N+2 at 1920 nm and 4600 nm respectively. While the lower layers’ pitches are generally fixed by the process and library, the upper layers vary much more in pitch and count, depending on the design. Even two smartphone SoCs on the same process can have wildly different metal stacks. The Helio G99 carries fewer routing layers, reaching coarse metal pitches of 850 nm by M9, while the larger and higher-performance Kirin 9030 keeps fine pitches until M11. SRAM At the leading edge, SRAM is much more difficult to scale than logic. TSMC’s latest nodes have seen little to no bitcell scaling, while logic still has more DTCO levers to pull. While looking for other logic libraries in the GPU compute units, we stumbled upon the SRAM. The most common type of SRAM has 6 transistors (6T), but this cell had 8 transistors (8T) instead. 8T SRAM adds two transistors to form a dedicated read port. Unlike a 6T cell, where reading disturbs the storage, the decoupled read port removes read-disturb, improving read stability and letting the cell be pushed harder for performance. At first glance, the cut looked like an unusual logic library, with each cell row having 3 fins of one polarity and 5 fins of another. The rows also alternated in orientation. Energy-dispersive X-ray spectroscopy (EDS) resolved our confusion. The cut had not landed on the GPU logic, but on the SRAM macro beside it. The unusual fin pattern was due to the SRAM library. We return to EDS in the process flow analysis behind the paywall. SRAM libraries are not like traditional logic libraries. Due to the unequal number of PMOS and NMOS transistors, they require specialized rules and layout libraries. They do not need the flexibility of logic libraries, so they are hyper-optimized for one purpose: dense, reliable memory. The SRAM cell we found is a 1:2:2-2:2 cell. This means there is 1 fin per pull-up (PU) PMOS transistor, and 2 fins per pull-down (PD) and pass-gate (PG) NMOS transistor. These 2 PU, 2 PD and 2 PG transistors would usually form a single 6T high-current cell (HCC). An 8T HCC adds a read-pull-down (RPD) and a read-pass-gate (RPG) NMOS transistor, each with two fins. We measured a cell height of 406 nm, which brings the bitcell size to 0.0463 µm². That is a theoretical peak density of 21.6 Mib/mm². We estimate that a 6T HCC would have a cell height of 292 nm and a size of 0.0337 µm². This is ~12% larger than a 6T HCC on Intel 3 and 4. We also estimate the 6T high-density cell (HDC) to have a cell height of 228 nm and a size of 0.0260 µm². This is coincidentally the same as the logic standard-cell height measured earlier. The estimate puts the cell near Samsung 7LPP/5LPP and slightly below TSMC N7/N6. That is a theoretical peak density of 38.5 Mib/mm². 6T HDC is arguably the most important cell as it is used for the largest caches in a chip, the L3 caches and system-level cache (SLC). Both the Kirin 9020 and 9030 have split the SLC into 4 banks to raise total SLC bandwidth. In the Kirin 9030, the SLC increased from 2 MiB to 3 MiB per bank. Correspondingly, the number of arrays within the bank also increased by 50%, from 16 to 24. Each array can store 128 KiB and forms an orderly pattern on the die shot. From the Kirin 9020 to the Kirin 9030, the area of a 128 KiB SLC array decreased from 0.0477 mm² to 0.0392 mm², an 18% shrink. The achieved density is 25.5 Mib/mm², 66% of the theoretical maximum. While the SLC was quite similar across both chips, the L3 has seen some major changes, particularly in terms of its layout. The total capacity also went up from 10 MiB to 12 MiB. Much like the SLC, the L3 is also split into 4 banks. In the Kirin 9020, an L3 bank consisted of 16× 128 KiB arrays and 16× 32 KiB arrays. However, an L3 bank in the Kirin 9030 instead consists of 48× 64 KiB arrays. In the Kirin 9020 L3, a 128 KiB array was 0.0513 mm² and a 32 KiB array was 0.0154 mm². The size of the 128 KiB array is different on the L3 and SLC as the assist circuitry for the two arrays differs depending on their purpose. In the Kirin 9030 L3, a 64 KiB array is 0.0210 mm². Although not a like-for-like comparison, normalized for capacity, it is 18% smaller than the 9020’s 128 KiB L3 array and 31% smaller than its 32 KiB L3 array. The achieved density is slightly lower than the SLC, at 23.8 Mib/mm², 62% of the theoretical maximum. Unlike the L3 and SLC, the prime cores’ private L2 cache uses a 2-bank design. As the prime cores’ L2 is latency-critical, it likely uses 6T HCC instead of 6T HDC. The 9020 has 16 arrays in each bank while the 9030 has 32. Each array has a capacity of 32 KiB. A 32 KiB array in the L2 shrank from 0.0171 mm² to 0.0142 mm², ~17% smaller. The density is 17.6 Mib/mm², ~59% of the theoretical maximum for 6T HCC. SRAM scaled well from N+2 to N+3, shrinking by ~19%, close to the theoretical logic shrink. The caveat is that N+2’s bitcells were unusually large, bigger than comparable 7 nm-class nodes, so part of the gain is catch-up rather than true scaling. With the insights from STEEL’s teardowns, we will be doing a deep dive into SRAM in a future newsletter article. Subscribe Everything above came out of a single STEEL teardown: die annotation, block-level area analysis and TEM cross-sections through logic and SRAM. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Future Roadmap The same cross-sections that pin down N+3 also show where SMIC can go next. Although N+3 is already close to the practical limits of DUV multi-patterning in several layers, SMIC still has a few scaling levers left. A theoretical N+4 would likely start with cell height. N+3 uses 5 M0 tracks between its power rails. Moving to 4 M0 tracks, as on SMIC N+2 and TSMC N6, could reduce cell height by roughly 15%. The routing grid is only one side of the shrink; the front end also must fit into the smaller cell. One possible FEOL lever is reducing the p-to-n isolation spacing from two diffusion grid units to one. Intel used this scaling booster on Intel 4, and TSMC did so on its N3 family. This path trades layout flexibility for density. Fewer M0 tracks reduce local routing resources, while tighter p-to-n spacing raises integration and design-rule difficulty. M2 is also constrained by the cell height shrink. For SMIC to maintain a ~5.7-track cell, M2 would need to move toward ~35 nm. That would move another layer into SAQP territory. SMIC could also reduce the CGP from 57 nm to 54 nm. Intel reached a similar CGP on Intel 10 nm/Intel 7 without EUV. The local interconnect is also tougher. If SMIC keeps the 3:2 M1-to-gate ratio, M1 would need to shrink to 36 nm and would likely require SAQP as well. If SMIC moves to a 1:1 ratio, M1 could relax to 54 nm, but it would give up routing flexibility. Under this theoretical path, we estimate that SMIC N+4 could reach a cell height of 198 nm and a CGP of 54 nm, implying a Bohr density of 137.8 MTr/mm², on par with TSMC N5 or Samsung SF4. However, the difficulty is cumulative. Each step is individually plausible, but together they make N+4 harder than the transition from N+2 to N+3. It will likely take longer, cost more, and carry less process margin. A theoretical N+5 would require a larger integration shift. One possible path is backside contacts (BSCon), moving power routing and source/drain contacts to the backside, which would reduce front-side routing pressure and enable another reduction in cell height. The front-side metal pitches could relax to reduce the process complexity. M0 would likely relax slightly to ~34 nm, and M2 and M4 pitches could relax further. CGP is unlikely to shrink much further. Even with EUV, 48 nm has been the practical limit for yield and process control. This approach would allow N+5’s cell height to fall to 170 nm and its CGP to 53 nm. This implies a Bohr density of 163.6 MTr/mm², on par with Intel 18A’s HP library. However, this would not make N+5 cost-competitive with the leading edge. It would reach a similar density through a much more expensive route. The integration difficulty rises sharply, with new process flows for backside alignment, wafer thinning, contact reveal, and backside metallization. Past this point, standard density and interconnect scaling become increasingly unattractive. That is where Huawei’s roadmap stops looking like a normal foundry roadmap and starts looking like a packaging roadmap. At ISCAS 2026, Huawei unveiled its tau (τ) scaling law, reframing process scaling in the time domain. τ is the time cost of data movement and processing: switching delays in transistors, RC signal propagation delays in circuits, compute, memory, and networking latency. Outside Huawei’s terminology, this is called system-technology co-optimization. This is Huawei’s answer to its lack of EUV lithography. Without EUV, planar density cannot keep pace with TSMC, Intel, or Samsung. If transistor density cannot shrink further, Huawei’s alternative is to shorten wires, reduce buffering, and stack logic vertically. “LogicFolding”, Huawei’s implementation of this new scaling idea, is, in practice, an aggressive 3D stacking approach. AMD V-Cache places SRAM above or below a CPU die. AMD’s MI350X places active interposer dies (AIDs) underneath accelerator and compute dies (XCDs), with the AIDs handling cache, IO interfaces, the network-on-chip (NoC) and embedded metal-insulator-metal (MIM) capacitors. With LogicFolding, parts of the same logic block are split across multiple active dies bonded face-to-face at ultra-fine pitch. This allows Huawei to shorten some critical paths and reduce buffer overhead, not merely add cache capacity or offload the IO and interconnect. Shortening wires is where the higher clocks come from. A large share of a modern core’s delay and energy budget goes into driving long interconnects and the repeater buffers along them. LogicFolding distributes a block’s critical-path gates across multiple stacked tiers bonded at a very fine pitch, so the bond interface behaves like an additional metal layer and the longest paths get shorter. That is how Huawei expects to recover frequency and efficiency it cannot get from the process alone. Huawei’s roadmap shows its intent. Prime core frequency is targeted to rise from 2.75 GHz in the Kirin 9030 to roughly 5 GHz by 2031, far beyond what planar scaling alone could deliver. Prime cores with 3.1 and 3.39 GHz clocks are being tested in its labs, although their power consumption is unknown. Beyond that, chips are in the design, simulation or pathfinding phase, meaning the frequencies are targets. However, the direction matters more: LogicFolding also helps with performance, not just density. The catch is that Huawei’s density claim is not directly comparable to foundry densities. A stacked design can report more transistors per package footprint by adding active layers, even if each patterned die remains well behind TSMC or Intel in front-end density. This is how Huawei can claim to reach foundry 14A-equivalent density by 2031. This is not a like-for-like foundry comparison, with Huawei using stacked logic and measuring density per package footprint. On a normalized Bohr-density basis, SMIC N+3 is ~114 MTr/mm², 38% less than Intel 18A’s HD library. Huawei’s 3D roadmap closes the gap by stacking active logic, reaching 215 MTr/mm² by 2030. In 2031, the roadmap density jumps to 295 MTr/mm², implying either a third active layer, partial EUV insertion or aggressive planar DUV scaling. Huawei’s methodology makes other foundries look much denser as well. Applying it to AMD’s MI450X with an N2 top die on an N3P base die yields a theoretical density of 460.2 MTr/mm² in 2026, compared with Huawei’s 295 MTr/mm² in 2031. This Kirin 9030 does not use LogicFolding, remaining in a conventional mobile SoC package. Instead, it forms the baseline for how far Huawei and SMIC can push planar scaling. Future teardowns of Kirin and Ascend chips will show both planar logic density and Huawei’s hybrid bonding solutions. Export controls changed China’s optimization problem rather than ending it. EUV restrictions raised the cost and complexity of leading-edge manufacturing without freezing it. SMIC reaches N6-class logic density through DUV immersion, SAQP and DTCO, while Huawei shifts more of the burden onto architecture, packaging and system-level integration. Future nodes will be tougher. N+3 still had room to tighten local metals and reduce cell height and CGP. Further scaling without EUV leaves fewer levers. More aggressive multi-patterning adds masks and overlay error. SMIC can keep pushing DUV, but each step will get more expensive and less forgiving. The design side is just as critical. Huawei had domestic EDA tools and flows before the Kirin 9030, with the Kirin 9000s, 9010 and 9020 making that clear. Huawei was able to ship multiple consumer SoCs on SMIC N+2 and N+3 while cut off from the Western EDA stack. US export controls restricted EDA tools for advanced chips in 2022 but did not target tools for more mature chips. In 2025, the US government briefly placed much broader restrictions on EDA software from Synopsys, Cadence, and others, before lifting them less than two months later as part of a trade deal tied to rare earths. Huawei has been unable to access those tools because it remains on a US trade blacklist. That forced Huawei, SMIC and Chinese academic institutions to build their own tools and flows. Researchers at Peking University recently announced a prototype EDA tool for Huawei’s LogicFolding architecture, which requires a new flow to handle the multilayer layout and floorplan. This is not the same as replacing the full Synopsys or Cadence stack, but it shows where domestic EDA is headed: toward tighter co-optimization between architecture, process and packaging. These advances are also diffusing into the Chinese ecosystem. SMIC is licensing its N+2 and N+3 processes to HLMC/Hua Hong at the government’s direction rather than by choice. If the same process learning feeds into Ascend accelerators for AI training and inference, the choke point shifts from one named fab to an ecosystem. Alibaba’s T-Head silicon arm and Cambricon, a Chinese AI chip designer that is expected to supply ByteDance, could also be major beneficiaries. Sanctions aimed at SMIC alone become less effective once the manufacturing knowledge has spread to other fabs and design houses. China is not closing the gap with Intel, Samsung and TSMC. The teardown shows the opposite in several places: no EUV, no backside power, higher process complexity, and visible trade-offs. But China is still advancing. If domestic chips become good enough for phones, inference, networking and security-sensitive workloads, they can matter strategically without matching TSMC at the leading edge. Behind the paywall, we show what else STEEL can do, with material and process flow analysis of SMIC N+3, and analysis of the Kirin 9030 package. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline, access the full Kirin 9030 and SMIC N+3 analysis or to commission a custom teardown, contact sales@semianalysis.com.
Justin Trudeau skipped Canada World Cup opener because girlfriend Katy Perry performed at US game
Former Canada Prime Minister Justin Trudeau attended the United States’ World Cup opener against Paraguay rather than his own nation’s game vs | KCBS All News 106.9FM and 740AM
Report finds deep racial and ethnic health disparities in Texas
We examine the Commonwealth Fund report's findings and what they reveal about health care access, affordability and outcomes across Texas.
SODO Business Association urges city to 'stop penduluming back and forth' as Seattle cleans up for World Cup
SODO urges city to ensure a smooth clean-up for the World Cup, preparing for 750,000 fans in downtown Seattle.
Adolescent sexual health continues to improve in Minnesota, but stark disparities persist
Teen pregnancy, birth, and STI rates continued to decline in Minnesota in 2024, though significant racial and geographic disparities remain, according to a University of Minnesota report.
Side-by-side size comparison of Samsung's upcoming foldable lineup leaked
A new leak reveals alleged screen protectors for Samsung’s Galaxy Z Flip 8, Z Fold 8 and Z Fold 8 Ultra, suggesting a wider, shorter Fold 8 design and clearer differentiation across the foldable lineup. While expectations are high that the Fold models will bring some significant changes, the same cannot be said for the Flip.
Curaçao embraces historic World Cup debut against Germany
Curaçao is preparing for its historic World Cup debut against four-time champion Germany with a sense of excitement and pride. On Sunday, the island nation of 150,000 people will become the smallest country ever to compete at the World Cup. Coach Dick Advocaat has done his best to keep his players focused and relaxed as they navigate this unprecedented experience.
AMD goes after Apple Macbook Neo, says 15 out of 20 top PC games do not even work on Apple system
Ryzen 5 220 comparison uses a 2025 Hawk Point processor.
Angst at the Supreme Court before a rush of decisions
Late spring means the Supreme Court is preparing to unleash decisions. Justices have already had a remarkable term. They invalidated much of President Donald Trump’s tariff policy, but also gutted the Voting Rights Act and gave Republicans an advantage in the redistricting war Trump started.
Capital City Pridefest brings surge in business to East Village stores
Organizers and business owners in Des Moines' East Village are preparing for a busy weekend as thousands are expected to attend the 47th annual Capital City PrideFest.
How Do PENN Entertainment's US$460 Million Property Bets Reframe Its Omni-Channel Strategy? (PENN)
PENN Entertainment has opened a new US$100 million, 203-room hotel tower at Hollywood Casino Columbus and is preparing to shift Hollywood Casino Aurora from its longtime riverboat site to a new US$360 million land-based complex opening on June 24, 2026, pending regulatory approvals. These twin property projects highlight PENN’s ongoing push to upgrade its brick-and-mortar footprint with larger gaming floors, upscale hotels, and expanded non-gaming amenities that could influence how its...
It’s not Ebola you need to be worried about with the World Cup. These are the real health risks.
That dip sitting out for hours in the heat poses a bigger health risk than Ebola, according to physicians preparing for the World Cup in New Jersey.
Delaware program aims to expand maternal care access in rural communities
A new initiative in southern Delaware aims to reduce maternal health disparities by bringing prenatal and postpartum support directly to women.
POLITICS: A day in the life of Alexa Avilés - Red Hook Star-Revue
It’s just past 8 a.m. on a rainy Thursday morning in Sunset Park. City Council Member Alexa Avilés finds herself in a position not unfamiliar to most New Yorkers: rushing out the door, preparing for an early meeting while taking calls with her daughter’s school, and racing to make the morning train.
'The Only Way to Keep Bungie Alive Is to Support Marathon,' Ex-Destiny Community Manager Says
As Destiny 2 fans mourn the game's final update, Bungie's former community manager has blasted players fixated on comparing its player count with fledgling extraction shooter Marathon — and said that the company's current issues began long before its arrival, as well as Sony's acquisition.
Ga. teacher-prep programs improve on science of reading, report finds
Georgia colleges and universities are doing a better job preparing future elementary teachers to teach children how to read, according to a new report.
Alabama teacher prep programs outpace nation in science of reading review
The National Council on Teacher Quality graded 20 Alabama teacher prep programs and found that 18 earned an "A" or A-plus for preparing aspiring elementary teachers to teach reading.
Tulane report urges healthcare investment to improve Louisiana economy, reverse population loss
A new report argues that Louisiana’s future population and economic growth depends on increasing investments in healthcare services and passing policies that address health disparities.
Integrating sustainable practices into undergraduate science education
Faculty and students at Georgia State University are working to integrate sustainable practices into undergraduate science education, and a new study highlights ways to advance laboratory practices and ...
Halo: Campaign Evolved Comparison Shows Difference Between Xbox Series X And Ally X
Based on early pre-release footage, of course
Georgia State Preparing Next Generation of Sustainable Scientists
From redesigned experiments to more sustainable habits, a new case study outlines how greener practices can be incorporated into student labs and learning.
Steelers shuffle roster spots after minicamp
The Steelers are preparing to wrap up minicamp but Pittsburgh continues to move around the roster.
Elon earns national recognition for preparing future elementary teachers in the science of reading
The Bachelor of Arts in Elementary Education program at Elon University has earned an A+ from the National Council on Teacher Quality (NCTQ) for how well they prepare future teachers to teach...
Five things to know about women and sport
Women's sports are on a winning streak, reaching new heights and shattering records. From the 2024 Olympics achieving gender parity to the growing audience for women's sports, there is much to celebrate and explore. Yet many gender gaps remain. Here are five key things to know about women and sport:
How preparing for the 24 Hours of Le Mans is unlike anything else in sports
The iconic and grueling 24 Hours of Le Mans is the most challenging race in motorsports. It's also the race everyone wants most to win.
Top 25 prospect Davion Thompson commits to Arkansas basketball
Top 25 class of 2027 prospect Davion Thompson has announced his commitment to Arkansas coach John Calipari and staff over other finalists Michigan, Baylor and Vanderbilt.
Local businesses roll out custom merch as World Cup crowds expected to boost economy
With Philadelphia projected to generate roughly $770 million in economic activity from upcoming FIFA World Cup matches, local businesses are preparing for an influx of fans by offering new merchandise infused with Philly flair.
The Health and Wellbeing of Formerly Incarcerated People in Connecticut: Insights from the DataHaven Community Wellbeing Survey
By Carter Shannon, Nat Markey, Nora Hodgson, Samantha Lydell, Andrew Carr, and Mark Abraham, DataHaven About this Report Approximately 1 in 5 men aged 18–64 in Connecticut have experienced incarceration at some point in their lives. This population includes people who have been held in a local jail for a single night and those who have served lengthy prison sentences, and it cuts across race, age, geography, and socioeconomic background in ways that reflect broader structural inequities in the criminal legal system. Yet across nearly every indicator of wellbeing, formerly incarcerated people in Connecticut face significant disparities compared to those without an incarceration history. This report explores data on the experiences of formerly incarcerated men in Connecticut from the DataHaven Community Wellbeing Survey (DCWS). The DCWS illuminates significant gaps in economic wellbeing, physical health, mental health, and social support between men with and without incarceration histories in Connecticut. The survey also reveals worse self-reported outcomes for formerly incarcerated people across a range of quality-of-life indicators, with disparities that are often most severe among those who have been incarcerated more than once. These disparities do not arise by chance. They are shaped by a policy landscape that erects lasting barriers to housing, employment, and healthcare for people leaving incarceration, as well as by the physical and psychological toll of incarceration itself. This report is being written in the political context of federal funding cuts to social programs and proposed rollbacks to Medicaid eligibility, changes that will disproportionately impact people with incarceration histories, who are more likely to rely on public health coverage and other safety net supports.
Video: Kingdom Hearts 3 Nintendo Switch 2 vs. PS5 vs. Steam Deck graphics comparison
Watch a brand new Kingdom Hearts 3 graphics comparison video for the Nintendo Switch 2, PS5, and Steam Deck versions.
Entertainment Highlights: Marketing director makes directorial debut with ‘Circle Mirror Transformation’
Discover the transformation of J. Bailey Burcham's perspective on community theater as he directs 'Circle Mirror Transformation' at Parish Players.
Trump, 79, Desperately Trying to Avoid One Comparison as Health Declines
The near octogenarian doesn’t want to seem old.
Musk Calls for UK Protests Days Before SpaceX IPO
Elon Musk should be busy preparing for the biggest stock market listing ever. But he’s still finding time to intervene in British politics.
Lincoln Parish and the Long Road From Band Member to Auteur Producer
After helping shape Cage the Elephant’s early sound, Parish found a second act in Nashville studios, where he now works with emerging artists as a producer, mixer, and mentor. For a lot of fans, Linco...
Essentia Health-Fargo offers new minimally invasive procedure for uterine fibroids
Essentia Health-Fargo is now offering a minimally invasive, non-hormonal procedure to treat symptomatic uterine fibroids, which are non-cancerous growths in the uterus, offering women a uterine-sparing alternative to hysterectomy.
MCWS 2026: College baseball has become a perfect parity showcase
With a whole new set of teams competing in the MCWS yet again, nothing needs to change in college baseball.
Comparing Tennessee's Neyland Entertainment District to others in college sports
When Tennessee opens Neyland Entertainment District in 2028, it’ll be among the first colleges with a mixed-use development, but far from the last.
Comparing Tennessee's Neyland Entertainment District to others in college sports
When Tennessee opens Neyland Entertainment District in 2028, it’ll be among the first colleges with a mixed-use development, but far from the last.
What voters need to know about BREC’s millage renewal
The millage funding BREC's maintenance and operation of parks, facilities and recreation services throughout East Baton Rouge Parish is heading to the ballot for renewal, with early voting set to begi… Already an INSIDER? Sign in. Already an INSIDER? Sign in
Google teams up with Paris Hilton to showcase Android and AI app building
In what is now her second big partnership around Android, Google has named Paris Hilton as an “Icon in Residence”...
Here’s what’s impacting the Ascension land market
Industrial expansion and retail demand are the main drivers in Ascension Parish’s land market as residential developers become more selective, according to Peter Laville with Elifin. Laville says Ascension’s strongest momentum is currently tied to industrial growth in Geismar and along the west bank, where major projects such as Hyundai Steel are creating demand for […]
UWA earns national recognition for preparing future elementary teachers in the science of reading
The University of West Alabama’s undergraduate elementary teacher preparation program has received an A+ from the National Council on Teacher Quality (NCTQ) for its excellence in preparing future elementary teachers to teach reading effectively.
Opinion | Democrats are too focused on racial disparities
The country lives, works, and loves across racial lines — it’s time to build on that reality.
South Florida businesses, airports preparing for influx of World Cup fans
South Florida isn’t just hosting the World Cup, it’s hosting the world’s biggest celebration with soccer, sunshine and South Beach selfies.
We can create the future of science right now
Paul Litvak is the founder and Executive Director of the Robyn Dawes Institute and a Visiting Scholar at UC Berkeley. He has a PhD in Behavioral Decision Research from Carnegie Mellon where he studied emotions and the sunk cost bias. Over 15 years in industry, he solved a wide range of challenging technical problems. At Meta he created models optimizing the ad review process. At Google he ran experiments to measure social influence. At Airbnb, he was a product manager leading machine learning teams optimizing search ranking and price suggestions. He also co-founded and led product at Rhythmic Health, a venture-backed biosensing startup, creating an accurate low cost system using a color changing strip and a smart phone to measure salivary lactate. The bottleneck At this point, it is uncontroversial to say that science needs to stop using the PDF article as the unit of knowledge and currency. The unbearable slowness of scientific publishing, the profit motive and margins: I’m not saying anything new. The PDF also sucks because it’s hard to extract structured information, which makes it hard to do evidence synthesis. As a result, we do much less evidence synthesis than is needed. And evidence synthesis ultimately undergirds most policy and medical decision-making. I can see second-by-second real-time odds for any sporting or newsworthy event, but a school board can’t see the best evidence on whether their 8th graders should be taught algebra. As a society, we don’t treat this as an important problem. Again, not controversial. Not only is the problem well understood, but the solution has already been laid out. What we need is AI-assisted living evidence synthesis - (1) an open knowledge graph of atomic claims, (2) claims linked to evidence, (3) assessment and synthesis of each piece of evidence, and (4) continuous updating with new data. What few realize (yet) is that the technical capacity to build this vision for a significant portion of science already exists. Not only that, scientists and startup teams are already building many of these components. I know this because I’ve been surveying the space and talking to many of the builders. There are some missing pieces: for example, evaluations of how well some of the components work. But at this point, most of what’s missing is a fully end-to-end working integration of all of these parts. In the rest of this essay, I’m going to lay out all the parts of a working living evidence layer for science and who is working on them, and propose concrete next steps for building this system. What’s now possible The diagram above outlines the components of a living evidence synthesis platform, including some of the teams working on each component1. Scientific PDFs are processed into claims with associated evidence. The evidence is subjected to a forensic audit, methodological evaluation and robustness and reproducibility checks. Finally it’s given a weight in a continuously updating synthesis. What follows is a description and status of each component and a few of the teams working on them. Document understanding The first thing you need to be able to do is turn an article into structured data. Mostly that means parsing PDFs. There are often multicolumn layouts that confuse non-specialized PDF to text processing libraries. For scientific papers, there is the added complexity of parsing formulas and tables and figures. This is a really hot area - there are startups offering APIs, and it seems like a new open source package gets posted to Github every few weeks. What follows isn’t exhaustive. A package called GROBID was the state of the art for a while, they didn’t update their package for nearly two years until very recently. In the meantime reducto.ai released an AI powered PDF extraction API, PaddleOCR became popular, IBM released a model called Docling, and both Mistral and Gemini created models and libraries. I also know of at least one other well-funded psychology research group working on a paper parser. By contrast, there are few open evals in this space, with no extensive evals for complex table comprehension in particular. Nonetheless, I’m confident this will be a solved problem soon, given the combination of LLM advances and developer interest. Hypothesis level extraction There has been increasing interest in comprehending the extracted text of papers and linking information to evidence for each hypothesis. A lot of work has already been done. Trialstreamer (Marshall et al. 2020) and RobotReviewer LIVE (Marshall et al. 2023) demonstrated automated extraction of trial population, intervention, and outcome at scale on clinical RCTs. PaperQA2 (Skarlinski et al. 2024) and Ai2 ScholarQA (2024) extended this to retrieval-augmented question answering with citation grounding. Elicit, Consensus, and SciSpace operationalized claim-level extraction for end users. OpenEval (Booeshaghi et al. 2026) is the most recent and most ambitious: 1.96 million atomic claims extracted from 16,087 eLife manuscripts using Claude Sonnet 4.5, grouped into ~299,000 results, with LLM evaluations showing 81% agreement with human peer review on a 2,487-paper subset. None of these solutions link claims to test-statistics, as you would need to evaluate randomized controlled trials. This is why I built the evidence.guide API - to extract hypotheses and associated test statistics from behavioral science papers. The best public eval of this kind of extraction I’m aware of comes from the recent SCORE project - they had humans code thousands of psychology papers to extract their claims by hand. It would be extremely helpful to the world if all scientific PDFs were available as structured open data. I’ve been working to make this happen, both directly at Berkeley and through coordination with large entities I can’t yet speak of; as hard as it is to do, I think it’s possible2. Forensic audit A lot of work has been done on forensic audit, but some gaps remain. Of course, for biology papers that rely on images for evidence, there are a variety of tools (notably Proofig and ImageTwin) to spot anomalies. These are still well short of what sleuths like Elizabeth Bik can do on her own, but these tools are constant companions among fraud analysts. There’s someone working on auditing Excel files for anomalies, and a number of teams are automating numerical checks like GRIM and SPRITE, including Scrutiny project, the INSPECT-SR team as well as statcheck. The regcheck team is building a way to use AI to compare preregistrations to analyses in papers, to ensure there aren’t significant deviations. Nonetheless, there are many other kinds of anomalies to screen for, both public and less publicly known. And there are no formal evals for anomaly detection that I’m aware of. Still, there’s a lot to draw from in this space and I’m pretty certain we will be able to scan papers for most kinds of obvious anomalies in the near future. Methodological review This area has been white hot, though I fear for many of the startups in this space, because this capability may become commoditized. There are at least six different AI peer review companies, including Refine.ink, Reviewer3, ReviewerZero.ai, Q.E.D. Science, Paper Wizard, and Isitcredible. Coarse (a pun on refine) was also recently created as an open source alternative. These systems provide qualitative feedback on the content of papers, spotting methodological weaknesses and mathematical errors. They seem to work pretty well, and many academics report bitterly that they exceed the average quality of typical peer reviewers. But there are few evals here either. What evals exist so far involve using LLM-as-judge (circularity problems abound) or comparing against human reviews of questionable quality. What you’d ideally want is an eval that measures capturing known errors in papers3. Reproducibility and robustness Another active area has been using AI agents to automate computational reproducibility4 and robustness5 checks in papers that report numerical results. For more recent papers where data and code are available, AI agents can see whether they can re-run the analyses and produce the numbers reported in the published paper. In addition to a handful of individual academics who have been experimenting using Claude Code for this, the Institute for Replication is a leading group working on building an end to end system. The evals related to this problem are the most mature, with CORE-Bench (Siegel, Kapoor, Narayanan 2024) and PaperBench (OpenAI 2025) available to benchmark agents on this task. There is also work on getting AI agents to test alternative ways of analyzing the data to ensure the results are robust to small analytic design choices. Synthesis This is the most underdeveloped area where significant investment is required. Although some automated evidence synthesis systems exist — for example, otto-sr is building an AI agent to write systematic reviews — none of these incorporate the full range of paper level signals to weight evidence appropriately. Nor is there anything like an eval or a gold standard for a good systematic review. Arguably Cochrane reviews are the closest we have to gold standard human systematic reviews, though I’ve heard academics in the know complain about their uneven quality. A key question for a synthesis platform is how to weight anomalies and methodological issues in assessing the quality of a piece of evidence. This is an unsolved problem and one I’m very keen to work on. Continuous updating There are many pieces of basic infrastructure available for monitoring for new research and initiating updates. OpenAlex is the current open citation graph. Retraction Watch integrated into Crossref in October 2023. Scite tracks how citations support, contrast, or mention prior claims. The Living Evidence Network demonstrated continuous-update workflows in clinical guidelines. Engineering this is a relatively straightforward task. When you look over this technical architecture and all the progress being made, it’s hard not to be optimistic that a living guide to scientific evidence will be built. The stakeholders are ready The social infrastructure for this is starting to coalesce — it’s not just a pie in the sky academic exercise to imagine this coming into existence. Institutions like the Center for Open Science, the Institute for Replication, the INSPECT-SR, the Living Evidence Network and more are all working on scaling work to improve research quality. Funders are also aligned. The Sloan Foundation has funded living evidence work through COS. Coefficient Giving supports the Institute for Replication and COS. The Astera Institute and the Institute for Progress have shown interest in this space. NIH has established an Office for Replication and Reproducibility. Although there are (very unfortunately) serious headwinds in science funding generally, there is an active group of funders interested in metascience. A brief word about what I’ve been doing at RDI. First, as a Visiting Scholar at Berkeley I’ve been actively figuring out how a non-profit and a public university can conduct and make public the results of large-scale academic article data mining. With some of the money I raised from donors, I commissioned a legal analysis of recent case law and publisher text data mining (TDM) agreements in order to understand whether a massive open data mining of academic articles is possible (with caveats, it is). I’ve also been working to bring together stakeholders in this space, and identify gaps. I’ve also been doing some software development in this space, with more to come. A pilot proposal The assumption undergirding all of this is that an AI, given all this information, would make the right judgment about a scientific claim with lots of conflicting evidence, weighing all the factors appropriately. That’s the hypothesis we need to test. Randomized control trial research is the best place to focus on first. RCTs are used to make many of the important decisions in society - from medical trials to public policy changes. And they use a relatively uniform set of inferential statistics with lots of known and available diagnostics. Behavioral science experiments, within the broader realm of RCTs, should be first used as a testbed whose results can be generalized. Because behavioral science is at the vanguard of open science practices, replications abound (there are thousands of them) to serve as ground truth training data. Key Hypothesis Therefore the pilot would test, in behavioral RCTs that have been replicated, whether the quality of evidence for a claim can be used to accurately predict whether that claim will replicate. Secondary Hypotheses Compared to claims that replicated, non-replicated claims demonstrate a greater share of forensic anomalies in their source literatures. Hypothesis level claim and statistic extraction is accurate enough to scale living evidence without onerous human review costs. Replication prediction is more accurate than prediction markets6 or journal prestige. If all the different quality signals we gather do accurately predict which studies will replicate, then we can use that model to score evidence to power the living evidence layer. Why this is informative regardless of outcome If the pilot succeeds, the architecture extends to medical RCTs (where Living Evidence already operates and integration is mostly about claim representation), then to slices of basic biology with stable replication structure. If it fails, the field learns which quality signals are load-bearing and which ones metascience has oversold. Either result is a contribution to knowing what the literature supports. Implications for funders Because this burgeoning ecosystem of builders already exists, a well-informed philanthropic or government funder could play a crucial catalyzing role in bringing this future about. They could play at least three roles: creating open structured datasets, publishing open benchmarks and incentivizing the solving of key technical challenges. First, open archives of papers that the government maintains, like PubMed, could be turned into structured data amenable to large scale metascience and claim aggregation. I know the US government already has an interest in doing this, though some key open questions remain unanswered. How do you determine the best models and systems for accurately extracting information from papers? How can you establish a robust way to allow researchers to flag errors and correct them? And finally, how do you create a legal regime in working with publishers to maximize the scope of available papers? For the latter, a university or a private philanthropy may be better positioned to make structured data publicly available under journal subscription terms or fair use. Philanthropists or government funders could also coordinate to create or commission benchmarks that evaluate whether important problems have been solved. For example, an open benchmark for claim extraction from a range of different scientific article types would be extremely helpful. Ensuring the underlying data are accurate is vital for creating these evaluations. I’ve discussed opportunistically using various human-created datasets for this purpose, but a consistent problem is that errors in human data make it difficult for them to serve as a gold standard. Finally, with structured data and benchmarks available, the government or private philanthropy could use them to incentivize groups to develop machine learning systems that meet these benchmarks. Prizes are one potentially valuable tool for this. For example, you could establish a prize for a system that accurately updates a living meta-analysis for a small set of claims. Prizes are particularly useful as signals of problem importance, and can help create vibrant ecosystems of public and private research—see, for example the role the government played in kickstarting the current work on nuclear fusion. Conclusion The drawbacks of the current scientific publishing system are known. Scientists agree, metascientists agree, philanthropists agree: the published PDF plus citation graph isn’t the right substrate for maintaining a representation of the evidence base in science. The pieces needed to build the alternative either already exist or are rapidly taking shape. The community is forming around exactly this problem, with concrete partnerships and shared infrastructure. A pilot should start on behavioral science RCTs because that’s the slice of empirical science most amenable to legibility, where replication ground truth is richest, and where the failure modes are best documented. What’s been missing is the galvanizing mission to assemble these pieces into something that works. That’s what I’m proposing to build. *** 1 I have a broader field map that I’ll release publicly soon. This is me, building in public! 2 If this is something that you are excited about, please reach out and talk to me. 3 More on this very soon too! 4 This tests whether, given the code and the data, you can get the same statistics as reported in the published paper. 5 This tests whether the results are the same as a paper’s given alternative analytical decisions in conducting the analysis (like outlier omission). Closely related is the idea of a “multiverse” where you come up with many different ways of answering the same underlying research question with the same data, and test whether the results hold in all those alternative methods. There’s been work on the latter as well. 6 Some of the replications, e.g. those from the SCORE project, had paired the experiments with forecasts from prediction markets. So we get to look at this for free.
Who's building and who's buying in Greater Baton Rouge
A look at the latest property transactions and issued permits in East Baton Rouge Parish. Los Angeles investor Andrew Fay purchased an industrial property at the corner of South Choctaw Road and … Already an INSIDER? Sign in. Already an INSIDER? Sign in
Baton Rouge brick company rebrands through Ascension acquisition
Cocreham Brick has rebranded as The Brick Company and acquired Gonzales-based Economy Brick, a move that expands the Baton Rouge company’s footprint into Ascension Parish and strengthens its position in Louisiana’s building materials market. The company, which has operated in Louisiana under the Cocreham Brick name for more than 75 years, announced the rebrand and […]
Graduate students address health disparities throughout North Carolina
The N.C. Albert Schweitzer Fellowship (NCASF) has announced the selection of its 2026-27 class of Schweitzer Fellows and welcomed Campbell… More on this post
MLB Power Rankings: Who needs a salary cap? Why almost every team is still in playoff contention
If you like parity, what more could you want than this?
What North Texas health leaders do isn’t changing for FIFA World Cup, but how they do it is
Soccer fans from around the world will be coming to North Texas this month for the FIFA World Cup. Local health leaders have been preparing for the influx of people for about a year and a half. Hospital and public health officials say what they’re doing hasn’t changed much, but how they do it has.
Beyond the parade: How Pride events are tackling LGBTQ+ health disparities
What do volleyball games and powerlifting have to do with Pride Month? More than you might think. How Des Moines organizations are using fitness to build community and improve the mental health of LGBTQ+ Iowans.
🚨 Because of snakes, Switzerland issued security alert
The Switzerland national team issued an alert to all members of the squad due to a new danger at their training camp. The European side is preparing for its World Cup debut at a training camp at the ...
Politics, Pubs, Parades, and the Parish: Joan Quigley
Quigley reflects on her upbringing in an Irish-American family in Jersey City, her early involvement in civic activism
Paramount's Warner Bros. acquisition to face lawsuit from US States
California, New York, and more are preparing legal action against the merger.
Republican and Democratic congressmen urge Floridians to start preparing for hurricanes
Representatives Byron Donalds and Jared Moskowitz join forces to get Floridians prepared for the forces of nature.