SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " roble " 2,256 found 🔀 AI-powered Shuffle
Making Our Own Luck
We are cross-posting a piece that former NIH official Kris Willis wrote for Macroscience. Kris is now the President and Founder of the Woodley Park Institute, for which I’m a board member. Picking winners or hedging bets? Federal science agencies have long wrestled with the question of how to ensure their billions of dollars of grants and contracts result in maximum benefits for Americans. On the surface, it might seem that a goal-oriented, interventionist style of management would be the best policy: prioritize our most pressing problems and distribute funding accordingly.This top-down strategy creates a unique hazard, though: bad choices can send resources in the wrong direction, resulting in slow progress that impedes the delivery of tangible benefits to citizens. Moreover, if decision makers pursue an applied advance when the underlying scientific principles remain poorly understood, they risk costly failures and a loss of support for the research enterprise at large. Examples include Nixon’s 1971 War on Cancer, undertaken on the premise that a cure could be achieved in less than a decade, the drive to build an operational commercial fusion plant by the mid-1990s, and the National Plan to Address Alzheimer’s Disease, which failed to produce the effective treatments and prevention strategies promised by 2025. The contrasting laissez-faire approach is to hedge your bets. If the path to an advance is impossible to predict, then the wisest choice might be to distribute funding to as widely as possible. The main risk of this strategy is that spreading funding thinly may limit the resources available to the most promising research, resulting in the same negative outcomes as the interventionist approach: limited support for the most promising topics, slow progress, and delayed returns. In reality, at science agencies like the National Science Foundation and National Institutes of Health, program managers navigate between these two extremes, setting some funds aside to target high-priority areas and using the rest to cover the widest possible range of meritorious proposals. This middle path seems like the most rational way to proceed, but it still requires making choices. How much should be set aside for high priority topics? What should those topics be? How should we define merit? Expert opinion can provide a helpful guide, but leading experts can have remarkably different opinions about what matters and what should be prioritized. Moreover, experts and administrators alike can be risk averse, giving an edge to high-profile, well-established concepts. What’s really needed is a data-driven framework to help guide decision-making, one that doesn’t simply repackage prestige or incumbency. Recognizing breakthroughs years in advance Many breakthroughs fail to attract funding or recognition at the earliest stages of development. Katalin Karikó, for example, spent years struggling to win grants for work on mRNA that would eventually win her and Drew Weissman a Nobel Prize. Similar stories can be told about Jim Allison’s groundbreaking studies leading to the development of cancer immunotherapy, Stan Pruisner’s demonstration that prions can self-replicate without DNA, or Robin Warren and Barry Marshall’s proof that Helicobacter pylori, not stress, causes ulcers. Yet at some point, the scientific community recognizes and responds to transformative breakthroughs like these. How does that change happen? And what if science funders could identify the areas that are on the cusp of a breakthrough? Those questions led my collaborators and me to study how scientists responded to past breakthroughs. Based on patterns in that data, we developed a means of predicting future breakthroughs, using biomedicine as a proof of concept. It’s worth taking a moment to describe how our approach works. Briefly, our prediction process begins by grouping the 18 million or so peer-reviewed papers in PubMed, the authoritative database of biomedical research, into roughly 50,000 unique topics. A small subset of these topics are so widely acclaimed as breakthroughs that they have been recognized with a major prize like a Nobel or a Lasker Award. We theorized that studying the development of these outliers over time, especially before they gained acclaim, was the key to identifying future instances of them. After defining topics, we chose 21 representative breakthroughs and asked what they looked like before they won prestigious prizes. To answer that question, we re-ran our topic-mapping algorithm repeatedly, winding back the clock one year each time, stringing together the years to follow the progress of each field as it grew and advanced. We found that in each case, the years leading up to a discovery followed a pattern: a burst of papers on a new, rapidly evolving topic, many of which quickly became influential. These characteristics—the percent of papers that are new, the percentage of papers that are brought in from other topics, and the influence of each individual paper—can all be measured separately for any given topic. Together, they act as a predictive signal that is detectable an average of five years before a transformative discovery is made, and up to thirty years before the discovery receives a major prize. Scanning the current research landscape for topics that display this signal allows us to predict what work will likely produce a future breakthrough. Each year we analyzed includes four or five signals, a number that appears to have remained constant across a twenty year time frame. In their classic work on the sociology of science, Bruno Latour and Steve Woolgar established that the desire to participate in a major discovery is an important motivator for scientists as they consider whether they should take up (or abandon) a research problem. Although further work is needed, the simplest explanation for our results is that this behavior is widespread enough to detect at scale. A foundational advance, or something like it, draws the attention of scientists and causes them to change the direction of their research. They vote with their feet, staking their own reputation and careers by publishing on and citing the new idea. That upswell of interest is the foundation of our breakthrough signal. What kind of research does our model identify as a breakthrough? After building a model based on the patterns in our 21 preselected breakthroughs, we tested it by identifying all early signals of discovery from 1994 through 1997. Of the 18 signals we found in that time period, 17 can be traced forward in time to a breakthrough. Examples include super-resolution fluorescence microscopy (see the image above), the directed evolution of proteins and enzymes (Chemistry Nobel, 2018), and sequencing the human genome (National Medal of Science, 2008). The discovery of the role of leptin signaling in obesity is a particularly interesting case study. Around 1950, scientists noticed the existence of a type of lab mouse that suffered from a unique inherited form of obesity. When given the freedom to choose their own diet, these mice ate more than normal and preferred food that was high in fat. Researchers had few clues as to why the animals overate; early experiments pointed to the existence of a soluble ob factor found circulating in the bloodstream that regulated appetite, but its identity was unknown. In 1994, Jeffrey Friedman and colleagues identified and sequenced the ob gene, noting that the protein it encoded appeared to fit the profile of a circulating factor. A year later, a trio of high-profile publications demonstrated that ob was a hormone that regulated body weight and fat deposition by regulating appetite. One of these was co-authored by Friedman, who christened it leptin from the ancient Greek word for thin. Using our model, the data from 1996 make it clear this advance would become a breakthrough. Scientists had flocked to study the biology of the new hormone, generating the flurry of new papers and citations required to produce a signal. One of these demonstrated that serum leptin concentrations reflected the amount of adipose tissue in the human body, providing clinical validation of the earlier mouse studies. Before the identification of leptin, scientists were unable to point to a specific molecule that controlled appetite and adiposity, so that it was impossible to rule out non-physiological causes of obesity; its characterization fundamentally changed our concept of weight gain. In 2010, Friedman and fellow pioneer Douglas Coleman were awarded a Lasker for the discovery. Our work also identifies breakthroughs in clinical practice and behavioral and social sciences, even though these areas are less likely to draw the attention of major prize committees. One example that falls into this category is the introduction of endovascular aneurysm repair, a minimally invasive surgical procedure for the treatment of abdominal aortic aneurysm, a leading cause of death among Americans over the age of 65. Relative to the previous standard of care, it reduces in-hospital mortality by almost four-fold. In 2017, Timothy Chuter received the American College of Surgeons’ prestigious Jacobsen Innovation award for his multiple refinements to the technique. Another under-recognized breakthrough identified by our model is the development of standardized survey instruments to assess the quality of life for HIV+ patients. The antiretroviral cocktails introduced in the mid-1990s reduced AIDS mortality, but treatment came with serious side effects. The new evaluations showed that patients whose disease progressed had worse physical functioning than Americans with other chronic diseases, while those who were asymptomatic maintained a health-related quality of life on par with the overall US population. This evidence made it possible for patients and activists to argue that even in the absence of a total cure, and in spite of the side effects, alleviation of symptoms was a worthwhile priority for clinicians. My colleagues and I have failed to identify any significant recognition for the physicians and health policy experts who pioneered this advance, although in 2016, researchers called for the World Health Organization to set targets for good health-related quality of life as part of its framework to end the AIDS pandemic. From forecasting to funding How should science funders use our predictions? Any serious discussion of what we should do with this new capability needs to begin with an understanding of its limitations. We can’t (and shouldn’t) invest all of our resources in the small number of topics predicted to produce breakthroughs. Innovative new fields are born from existing ones; they rarely arise de novo. If funders don’t maintain a diverse portfolio, the breakthroughs of tomorrow will have no antecedents. Think of this as eating the seed corn, or killing the goose that lays the golden egg. There are also multiple goals of funding beyond basic scientific discovery, including translating discoveries into clinical practice, developing new technologies, supporting economic development, and training new scientists. The investments needed to accomplish these goals are likely different from those required to support emerging breakthroughs. Finally, we must be aware that we may not capture every instance of a breakthrough. The concept is fuzzy, and not every significant discovery is recognized with a major award. Further, breakthroughs are rare, meaning that our dataset is, by necessity, small. This makes formal estimates of accuracy challenging. Although our overall success rate appears to be high, any one signal may turn out to be a false positive. We found one apparent example: the development of the third generation COX-2 inhibitors, Vioxx and Celebrex, which were much celebrated in the early 2000s as effective but non-addictive pain relievers, meets all the algorithmic criteria of a breakthrough. Five years after it received FDA approval, researchers demonstrated that Vioxx was associated with serious cardiovascular complications, and the manufacturer voluntarily pulled the drug from the market. Celebrex remains available, although like other NSAIDs, it carries an FDA warning for increased cardiovascular risk. Decision makers who were overly focused on the breakthrough potential of this research might have wasted substantial resources nurturing an area that ultimately proved to be a failure—but so would those who relied on expert opinion at the time. That said, the potential benefits of funding the next mRNA vaccine or cancer immunotherapy years earlier than we might have are large. When we can’t assume the outcome of an action, it’s worth conducting an experiment. Can targeted support for areas that are poised to produce a breakthrough increase the return on scientific investment without cannibalizing future advances? With the necessary administrative infrastructure in place, conducting this experiment would be straightforward. First, identify all the breakthrough signals between 2018 and 2023, select half at random, and commit to a decade of investment. For biomedicine, a six year window should yield about 30 topics with the potential to produce a breakthrough. Providing strong support to half of these might be accomplished for $300 million a year. That’s roughly half of the recent annual budget of the NIH Common Fund or around 20% of the fiscal year 2025 budget for ARPA-H. After five years, then again at ten, compare to see which group — the one that was actively managed, or the control — produced more breakthroughs, and on what timescale. Although we used biomedicine as an example, the same experiment could just as well be run for physics, materials science, or any other discipline. Any attempt to undertake such an experiment should keep three points top of mind. First, we can predict the topic of future breakthroughs, but the people and vision for how to move the work forward are still important. In practice, this means success requires active program managers with the expertise to develop the science and the authority to do so, including by recruiting investigators. Second, we would be wise to learn from the failures of past attempts to fund transformative research. High among these are funding modestly repackaged work, confusing the genuinely novel with the merely unfamiliar, and relying too much on incumbent investigators. All of these risks can be mitigated by thoroughly and intelligently integrating high quality data into portfolio management. Finally, we need to have patience. Even with strong funding support, producing a breakthrough takes time. If supporting breakthroughs is the best way to nurture the birth of new fields, we also need to accurately describe and properly manage the other two stages, so that we invest wisely throughout the productive lifetime of ideas and divest once they reach the point of diminishing returns. We would benefit from more study of all of these phases, especially the transition from one to another. More research could answer questions like: When does a breakthrough become an established field? How do the availability of funding, the size and characteristics of the available workforce, and the accumulation of evidence that disagrees with prevailing models affect a field’s decline? Exactly how do old ideas give birth to new ones, and can we speed up the process? The more we understand about the dynamics of scientific progress, the better we can maximize the odds that our curiosity leads to results. I’d call that finding a way to make our own luck.
'Unflappable' Justin Wrobleski Becoming 'The Shark' In Dodgers' Rotation
Justin Wrobleski created his own model to chart his development. Here's how it's taken him from fringe starter to potential All-Star.
How should European scientists respond to the US AI kill switch?
Earlier in June, Europe’s worst fears of technological dependence were confirmed when the White House ordered the AI firm Anthropic to stop non-US citizens using its leading models. This kill-switch moment crystalised anxieties in Brussels that the continent, lagging the US on the creation of leading-edge AI models, is now a technological of vassal of Washington. The shock has specific implications for European scientists and universities. Some governments are now worried that with AI being integrated into labs, Donald Trump now has his finger hovering over an off switch for European science. “Having restrictions on this tool, it can have an impact on our own research,” said France’s research minister, Philippe Baptiste, at the VivaTech conference in Paris on June 18.Baptiste, himself a former academic, said that colleagues in mathematics had recently warned him they were now cut off from leading-edge US models, risking their work. “This model is not available anymore now because of the US restriction, and for the first time this had an impact on mathematics,” a field where large language models (LLMs) are making a significant contribution, said Baptiste. So, should European scientists avoid relying on US models in the future? Or would this be a self-harming overreaction? And how is AI being used in science, anyway? What happened?On June 12, it emerged that Washington, citing cybersecurity concerns, had ordered Anthropic to stop non-US citizens using two models: Claude Mythos 5, and Claude Fable 5, a version of Mythos but with guardrails to prevent abuse. Anthropic said Washington’s concerns were overblown. But forced to follow the order, yet with no way to check who was using the models, the company suddenly shut down access for everyone, US citizens included. There’s still no agreement on how to restore broad access. But last week, Bloomberg reported that select US companies, and the US government, still had access to Mythos despite the ban, but the EU’s cybersecurity agency Enisa had been shut out. Class division of researchersIn the longer term, access outside the US should be restored, said Marcel Salathé, co-director of the AI centre at the Federal Polytechnic School of Lausanne (EPFL), because a permanent restriction would be financially ruinous to US AI firms. “Even Trump will eventually budge to economic pressure,” he said.However, US AI firms might end up operating rather like banks, doing due diligence on users of their leading-edge AI models, he went on.European scientists are unlikely to fall foul of such checks, he said. But having a Chinese postgraduate in their lab, or doing a type of research the US disapproved of, could potentially result in access being denied. “It will create a sort of class division of researchers,” he said. More than frontier modelsHowever, successfully deploying AI in science is about far more than just having access to leading LLMs such as Mythos.Instead, many science-specific tools, most famously Alphafold, which predicts protein folding structures, require “far less” computing power to train than frontier models, well within the capabilities of European supercomputers, according to a recent analysis by the Arq Foundation, a Brussel-based AI think tank. Instead, tools such as Alphafold are possible because certain fields, like protein folding, weather prediction or astronomy, have large, clean, standardised datasets that can be used to train predictive models. Rather than compute, “data is the central constraint for AI for science,” the report says. For example, a less powerful physics model trained on CERN’s data “will be more valuable than the best model without certain data,” said Bengüsu Özcan, author of the report. European advantage?Europe could therefore steal a march by using its scientific data and infrastructure to create models US digital giants cannot. “They might actually match or go even beyond what these big [US] companies are doing,” said Özcan.Indeed, some European start-ups hope to create automated testing labs to create the kind of standardised data that could speed up the discovery of new materials. Materials scientists say there’s currently too little data to train models. AI scientistsHowever, even if the bottleneck for AI in science is often data, rather than compute, being at the mercy of the US for LLM access could still become a problem for European scientists. A new class of “AI scientists” based on leading LLMs is also emerging, Özcan’s report says.Unlike domain-specific tools like Alphafold, these try to automate day-to-day scientific work, by providing an overarching tool that coordinates specific models to synthesise existing literature, generate hypotheses or run analysis of data. The problem for Europe, however, is that these tools are sometimes based on US leading models. Google Deepmind’s AI Co-Scientist, for example, is built on Google’s Gemini LLM. Systematic failureThese scientific automation tools are still in their early stages, and still exhibit “systematic failures on scientific tasks,” Özcan’s report says. One of the problems is that the messy, day-to-day process of scientific discovery is largely not documented, meaning LLMs don’t have a good source of data to learn how scientists actually work. Meanwhile, some tasks, such as literature synthesis, don’t typically require access to leading edge models.However, the performance of AI scientific assistants could improve as companies such as Google pour resources into developing them. Rely on US“Unfortunately, for scientific assistants, there is not much we can do right now except rely on US frontier AI,” said Antoine Bosselut, a natural language processing expert based at EPFL. Chinese-built open models, which can run on local computers, lessening the risk of a shutdown, are touted as one alternative to US dependence. There’s also Mistral, once seen as Europe’s main AI hope, but the Paris-based company has seen its recent models fall behind in performance. But the Chinese alternatives are generally not as capable as US frontier AI models, said Bosselut, unless paired with fiddly, custom tools that allows them to act as independent agents. “Most scientists do not have the time,” he said. Don’t jump ship yetAlthough the kill switch moment is seen a warning shot for European scientists, it doesn’t mean labs should abandon US AI tools immediately. “I do not think the right response is simply to abandon US-based models and systems under the banner of sovereignty or independence,” said Mattias Björnmalm, secretary general of the Cesaer university association. “That would be an overreaction.”Related articlesEuropean sovereignty in AI requires ‘ugly trade-offs,’ say experts Robotic lab start-up makes case for €500M EU-funded materials testing facilityAI in science: is it useful? Instead, European researchers need to ask themselves whether they’re becoming dependent on technology that could be turned off in Washington, said Özcan. “They might not see this today, but they should really start asking this question,” she said. European researchers need a plan B, said Salathé. “I would recommend to every researcher, very proactively explore alternatives.”Own toolsIn addition, Björnmalm and others want European research institutions to develop their own scientific AI tools.Instead of signing AI deals with US digital giants, European universities should be using this money to create their own models, which may end up being superior for research, said Sabine Leonelli, an expert on the use of AI in science at the Technical University of Munich. “Universities in Europe seem to be happy to sign commercial contracts with US companies on the assumption [their AI tools] are better,” she said. But US frontier LLMs are typically opaque, and have been developed without independent scientific input, she said. “This is not good enough for science.”Last year, Swiss researchers released Apertus, an LLM designed to be completely transparent, from its development methods to its training data. The idea is that this makes scientific tools built on top of the model far more reproducible than with closed, commercial alternatives.“Europe needs more of this: serious capacity-building that gives researchers, universities and companies credible options,” said Björnmalm.
We’re dermatologists. Sunscreen isn’t the problem.
Every year, a safe-sunscreen guide sparks needless concern.
The Red Sox Have a Big Jarren Duran Problem
The Boston Red Sox could have a tough time selling off one of their most obvious trade chips at this year's deadline.
Downtown Middletown businesses say vacant storefronts continue to hold city back
Vacant storefronts have been a challenge in downtown Middletown for years, and some business owners say a lack of enforcement on existing rules has allowed the problem to continue.
How the world views Keir Starmer’s resignation
With the prospect of seven prime ministers in the last 10 years, No. 10 Downing Street is seen as a revolving door and Britain as having ‘profound’ problems
iPhone Ultra 3D-printed hinge problems reportedly solved
Talk of a delayed launch for the upcoming iPhone Ultra now seems to have faded away, with all recent reports...
Meta Thinks 'Social Learning' Can Fix Smart Glasses' Privacy Problems
Meta's CTO, Andrew Bosworth, suggests privacy expectations about smart glasses will be decided in the court of public opinion.
These 3 Kenvue brands target common skin problems through science
Neutrogena®, Aveeno® and Lubriderm® each offer science-backed solutions to common skin issues.
The Caspian Sea Is Shrinking – And Humans Are The Problem
Dammed if you do: many countries have a huge incentive to fix the problem.
Why Healthy People Often Become The Problem In Unhealthy Systems
Whether in families, workplaces, or friendships, the person who challenges dysfunctional norms is often blamed for disrupting the status quo.
What Owners Say Is The Biggest Problem With Foldable Phones
Some of the things people don't like about foldables are the durability of the hinge, the subpar battery life, and the strange aspect ratio.
Video: Opinion | Why Democrats Need a Politics of Joy
The joylessness of metrics-obsessed, achievement-oriented elite culture is eroding the simple joys of living, the novelist Gary Shteyngart argues on “The Ezra Klein Show.” And, he says, this antipathy toward pleasure is a problem for Democrats.
Doctors Thought It Was Asthma. A.I. Flagged a Serious Heart Problem.
Artificial intelligence programs can spot patterns in electrocardiograms that humans miss. Now, one program is going to be widely available — for free — to doctors.
The Torture Chamber of British Politics Crushes Its Latest Prime Minister
Keir Starmer becomes the sixth Prime Minister over the past decade to resign, surrendering to the U.K.’s manifold problems.
‘Problem-solving, innovation, and meaningful impact’: Jessica Fuertes-De Arcos’ multi-disciplinary Cyclone Engineering experience
Jessica Fuertes-De Arcos walked across the stage at the Iowa State University commencement ceremony to accept her bachelor’s degree in chemical engineering in May of 2026.
In Washington and Around the World, Alliances Are Rapidly Fraying | WSJ Politics Newsletter for June 22
Plus, more pool problems for Trump, and Jay Clayton remains in limbo over the post of director of national intelligence
Your Storage Problem Has a Prime Day Solution. We Found SSDs Starting at $50
From budget picks to blazing-fast upgrades, here's every Prime Day SSD deal worth your attention.
Prediction markets surge in US as public health advocates call for support to combat gambling
Platforms like Kalshi and Polymarket operating in areas with limited resources for people with gambling problems
Lions safeties coach updates Kerby Joseph's practice regimen
As Kerby Joseph continues to rehab from his problematic knee issues, the Detroit Lions spoke on the former All-Pro safety's offseason practice status.
4 Common Problems With Inline-6 Engines
Inline-sixes tend to have problems tied to their size and length, higher camshaft flex and torsion, uneven air/fuel distribution, and timing chain problems.
Amazon's Prime Day has a problem: Almost everyone has Prime already
Amazon Prime Day has maxed out the addressable market for its membership, so it's changing its Prime Day strategy.
A $75,000 Problem in My Business Taught Me the One Leadership Skill That Matters Most
Great leaders demonstrate strong judgment by surfacing problems early, preserving options, and enabling teams to act before it’s too late.
🚨 Now it’s getting serious! Oranje tear Sweden apart
The emphatic 5-1 win in the opener briefly made Sweden’s problems in qualifying for the World Cup fade into the background. But the Netherlands are now exposing them in impressive fashion in the sec...
Are Brazil back in business after World Cup win vs. Haiti? Not quite
Brazil get the mental boost their World Cup campaign needed with a 3-0 win over Haiti, but coach Carlo Ancelotti is left with plenty of problems to solve.
A single cobalt shock could trigger global EV battery supply chaos
The global cobalt supply chain is more interconnected—and more vulnerable—than previously thought, with disruptions capable of triggering far-reaching cascades across multiple countries and industries. Researchers warn that protecting battery supply chains will require system-wide coordination because critical bottlenecks can turn local shocks into global problems.
Tests of the Reflecting Pool Turn Up a Surprise
Eforts to clean the pool might be making the problem worse.
Health care costs are a problem in Vermont. Private equity isn’t.
Limiting buyers for medical practices may instead strengthen large hospital systems.
I quit alcohol to be more present for my 4 kids
Chris Rojas developed a drinking problem when he entered the restaurant profession at 18. He quit alcohol to be more present with his kids.
Mauricio Pochettino offers 'full support' to Lionel Messi's family following father's health issue
Mauricio Pochettino has sent his best wishes to Lionel Messi and his family following confirmation that the Argentina captain's father has a health problem.
Mauricio Pochettino offers 'full support' to Lionel Messi's family following father's health issue
Mauricio Pochettino has sent his best wishes to Lionel Messi and his family following confirmation that the Argentina captain's father has a health problem.
Opinion | Spectacular Scoring! Political Intrigue! Heroic Defending! The World Cup Has It All.
The history of global soccer, in some sense, is a history of the world’s political problems.
Milwaukee leaders call for change following scooter crash
Milwaukee business owner, Dave Wolz, is currently hospitalized with broken bones after being struck by an electric scooter rider on a sidewalk.
SF Giants Opinion: Time to clean house
The Giants have a problem. And it might be time to clean house.
Social Security Reform: The Math Is Easy. The Politics Are Hard. And This Is the Wrong Way to Look at It.
Social Security should be neither a math nor a political problem At a recent AEI event on the 2026 Social Security Trustees Report, Social Security’s Chief Actuary Karen Glenn (pithily, credit where due) summed up the conventional...
Marathon Has A New Problem: Players Have Too Much Loot
Bungie is trying to recalibrate the extraction shooter's economy before it's too late
Are Counterfeit, Scam SD Memory Cards Really a Problem?
A recent video claims fake, scam SD cards are so prevalent, everyone probably owns one. But is that really true?
NM spent nearly $844M on behavioral health, but 'investment is not yet matching the outcome'
New Mexico has spent $843.5 million since 2022 to rebuild state’s behavioral health system but still faces problems.
'Relief' for small businesses after St. Petersburg city council rejects parking changes
Parking continues to be a problem in St. Petersburg, especially in neighborhoods with popular restaurants and businesses. City leaders voted down a proposal that would have allowed specific neighborhoods outside of downtown to establish resident-only parking zones.
Zero sugar, more problems? Study reveals surprising gut health effects
A study presented at ENDO 2026 suggests that completely eliminating sugar from a low-fat diet may harm gut health and increase inflammation.
Researchers found 8 common food additives linked to high blood pressure and heart disease
A major study of more than 112,000 people found that eating foods containing common preservatives may be linked to a higher risk of high blood pressure and heart-related diseases. Researchers tracked participants for up to eight years and discovered that people consuming the highest amounts of certain preservatives had significantly greater risks of hypertension, heart attack, stroke, and other cardiovascular problems.
Google's extensive June security update fixes tons of lingering Pixel problems
Problems from May persist, but Google's offering some fixes.
Anthropic ships major Claude Design overhaul with design system imports, code round-trips, and a fix for its token-burning problem
Anthropic has overhauled Claude Design with brand-compliance controls, Claude Code integration, lower token usage and new enterprise app exports, positioning the AI tool as a serious platform for design-to-code workflows.
Dodgers notes: Shohei Ohtani, Justin Wrobleski, Kyle Tucker
Tuesday was as low scoring of an affair as one could as for, as the Dodgers came away with their second 1-0 win since June 5. In what has been an unbelievable offensive stretch since May 12, Shohei Ohtani kept it going as he provided the only offense for either side, blasting a solo home […]
Latvia pilots citizen engagement in research grant evaluations
Latvia has introduced an element of citizen engagement to the evaluation of nationally funded research grants. The aim is to both create more connections between science and society, and to improve the quality of its evaluations. The move comes as research funders across Europe are experimenting with ways to improve evaluation processes in the face of a sharpened focus on science’s impact on society. Evaluators of grant applications submitted to Latvia’s Fundamental and Applied Research Programme (FLPP), the country’s main research funder, will this year have the option of consulting citizen feedback on challenges the public thinks science should focus on to inform their decisions. “In recent years, both public discussions and policy-level debates in Latvia have highlighted the importance of demonstrating how publicly funded research contributes to society, the economy and the resolution of real-world challenges,” said a source at the Latvian Council of Science (LCS), which manages the FLPP. “At the same time, research institutions themselves expressed interest in improving the project evaluation framework while continuing to ensure that funding is awarded to the highest-quality projects,” the source added. The citizen input comes from a survey that was conducted between 25 February and 16 March 2025, to which 1,737 people responded. It gathered information on what the public views as problem areas for Latvia, and the role of science and technology in providing solutions to these problems. A summary of these responses has been included as an annex to the FLPP 2026 call for proposals that evaluators can refer to, purely in an advisory manner, when judging proposals. Results from the survey show that the main problem areas identified by the public were in healthcare and public health, followed by the development of new treatment methods and medicines, and then digital technology, data security and cyber security. At the bottom of the list was research aimed at acquiring new knowledge about the universe, matter and the laws of nature. Further analysis looked at the public view of the possible role of science in solving these problems. The survey charted 4,167 individual responses based on open-ended questions that were derived from the participants’ answers. The analysis again found that medical and health sciences topped the scoring, with 788 responses referring to the field. Humanities and the arts were bottom of the list, with 625. Digging further into the details, the survey suggests citizens are aware of and concerned about a number of research areas. This includes technologies and innovation to improve the environment or reduce pollution, the development of modern military technologies and cybersecurity tools, and the development and application of artificial intelligence, among others. “We hope this initiative will help strengthen public trust in science and create a more meaningful dialogue between researchers and society,” the LCS source said, adding that it offers benefits to researchers, evaluators and to the general public. More space for citizen engagement in evaluationsThere is a gradual but increasing use of citizen engagement in research evaluation processes around Europe, especially in healthcare, but it remains relatively rare, said Henry Sauermann, a professor at the European School of Management and Technology in Berlin and an expert in citizen science.“Given that we are at a point where citizen involvement is extremely limited, there is presumably space for more, but it's not that we should do it just because we want to do it,” he told Science|Business. He said some research lends itself better to having citizen input, and this usually tends to be on the applied end of the science spectrum where the public can offer useful feedback based on their experiences. He added that advising scientists on certain topics to study is also a useful approach, in the way that Latvia is doing. “The public does fund a lot of science, there's a lot of tax money going into this. We of course do want to preserve academic freedom, but it's also not unreasonable to incorporate more feedback or input from citizens where possible,” he said. Related articlesCitizen science: where, when, and how to let the public contribute to researchHow can Europe cope with a flood of AI-assisted research grant proposals?Data Corner: Horizon Europe’s AI, digital and data call success rate is 5.2%There are several ways of involving citizens in science funding. The most minimal way is having a few representatives on a panel, such as members of a patient group or union. The most direct way is crowdsourcing funding for specific projects. There is an increasing number of online platforms that allow the public to chip in to support scientific proposals.Sauermann studied this in a recent paper and found that it can have its uses, but it still is not clear if there are benefits to it. There are various assumptions linked to citizen engagement, for example that it increases public trust in science, or that it provides a representative view of what the public thinks about science. These are not necessarily true, Sauermann found. People who participate in engagement activities tend to already be very trusting of science, and, on the whole, it is generally the well-off and well educated who contribute, giving a narrow view of public opinion. On whether citizen input can help manage the increasing number of proposals that are being submitted due to assistance from AI, Sauermann is more sceptical. “The obvious answer to the flood of AI-written proposals is AI-driven evaluation,” he said, adding that it doesn’t mean citizen engagement shouldn’t be a part of evaluations in a well thought-out manner. Southern Denmark’s successful approachOne successful example of citizen engagement in science evaluations was implemented in southern Denmark. Between 2019 and 2025, citizens in the region were invited to vote to fund one of five pre-selected projects in the field of healthcare. The project, called A Healthier Southern Denmark, was a collaboration between regional authorities, the University of Southern Denmark, and two media partners. Over the seven years, there were 75,000 votes and significant public engagement online and on social media. “It was a bit of a wild project, we’d never done something like that before and we were a bit nervous about what would be said in the media about it. But actually, people were very positive,” said Anne Kathrine Overgaard, one of the main organisers of the project from the University of Southern Denmark. The university and its researchers have learned a lot from the experience, particularly about engaging with society and shaping their research to match real-world needs. This is important with Europe’s increasing focus on competitiveness and bringing innovations to market faster, Overgaard said. She hopes to see more citizen engagement in evaluation processes and in science more broadly. “For many years, citizen engagement has been a bit of an add-on to proposals, just to check a box. But I think things are changing,” she said. It’s less about citizens just gathering data and more “about the dialogue between the public and the scientists,” she said. The initiative ended last year as the team wanted to regroup to find fresh momentum. The development of AI and AI-written proposals has made Overgaard reflect on how the project could be reworked to help evaluators. She hopes to bring it back in the future. “It could be a good idea to try this initiative again in a slightly re-worked format,” she said.
Superconductivity breakthrough could unlock ultra-efficient electronics
A clever nanoscale redesign may have solved one of superconductivity’s biggest problems. Researchers in Sweden discovered that by subtly sculpting the surface beneath an ultrathin superconducting material, they could make it stay superconducting at higher temperatures and under much stronger magnetic fields.
Hollywood's Problems Collide with California Politics: Daily Variety
On today's 'Daily Variety' podcast, Variety's Gene Maddaus unpacks why Hollywood's problems have collided with California politics like never before.
Trump accused Obama of funding Iranian terrorism. His agreement could grant Iran access to much more money
President Donald Trump’s nascent agreement with Iran is beset by problems right now, but at the top of the list may be the issue of money flowing to Iran.
Mamdani's affordability problem worsens as NYC business leaders blast his housing plan
‘The Big Money Show’ discusses Manhattan's median rent, which climbed to a record $5,125 in May, up 7% from a year ago, raising new questions about affordability as demand continues to outpace housing supply across New York City.
Miami-Dade commissioners vote unanimously for new mental health center
Steven Leifman, a judge and finance chair of the Homeless Trust, has been on a quest to help address a societal problem he has experienced in his Miami-Dade courtroom, defendants with untreated mental health issues leading to what he says is a revolving door of arrest and release.
AI And Your HVAC Guy: HBS Founders Reveal Inside Business Strategies
AI startups succeed by solving real industry problems, prioritizing adoption, trust, workflows, and revenue.
The Women’s Health Problem Halle Berry And Nella Want To Help Solve
Nearly 75% of women delay gynecological exams. Halle Berry discusses Nella's mission to improve comfort, access, and preventive healthcare.
Pirate Problems: What Quarterback Will Buccaneers see Against Vikings?
As Minnesota navigates a brutal opening stretch, Tampa Bay prepares for a dual threat: veteran Kyler Murray’s resurgence or the raw potential of former first-rounder J.J. McCarthy.
Scientists tried to fool bumblebees into avoiding a flower. They failed in the best way.
A new study proves bumblebees can problem-solve similar to big-brained creatures, showing just how smart the insects are.
Scientists found a way to explain bird flocks that “defy” Newton’s third law
Physicists have solved a long-standing problem involving systems that appear to violate Newton’s third law, such as bird flocks and bacterial swarms. By adding carefully designed “imaginary partners” to their models, they can now simulate these complex systems with unprecedented accuracy.
Readers Write: Nuclear power, history, political violence, undocumented workers, wealth
First: the nuclear waste problem.
Dodgers’ Bench Coach Speaks on Recent Big Inning Problem
Los Angeles Dodgers bench coach Danny Lehmann pointed out the problems he's seen within the Dodgers' pitching recently.
What Brendan Sorsby case reinforces: There are no rules in college sports
The Sorsby case was the NCAA’s Waterloo. If the NCAA was already staggered with the myriad problems it faces via NIL and the portal, the Sorsby case was the kill shot
Voter Voices: Longtime poll watcher has seen problems, politics
"Voter Voices" is a series of Mississippians sharing their thoughts on voting rights, the state's history of voter suppression and the new gerrymandering push embroiling Mississippi, the South and the nation.
Trump, 80, Tries to Hide Chronic Health Problem at Tacky Birthday Bash
Nothing to see here.
Sleep deprivation linked to mental health problems in adolescents
Insufficient sleep, particularly among adolescents, has been identified as a public health epidemic. WEMU’s Caroline MacGregor reports.
Opinion | The problem isn't dying. It's how we treat the dying.
The problem isn’t that dying patients lack options. It’s that our health care system too often abandons them when they need support most.
Who slept the worst last night: George Russell
18 points made up and still the big loser - Why George Russell is slowly running out of explanations and what additional problem he now has
Is SMIC N+3’s Metal Pitch Smaller than Intel 18A’s?
Almost four years ago, we published that SMIC had started shipping 7 nm (N+1) chips. Now, SMIC is shipping its third-generation 7 nm (N+3) process in Huawei’s Kirin 9030, with a minimum metal pitch of 32.5 nm, about 10% tighter than the 36 nm minimum metal pitch shipping in Intel’s latest Panther Lake CPUs on 18A. The headline is true, but incomplete cherry picked metric. N+3 reaches the density of TSMC N6 through aggressive DUV multi-patterning and design-technology co-optimization (DTCO), but it pays for that in complexity, efficiency and process control. We found this and more in our reverse engineering and teardown where we cover SMIC’s N3 process technology, Huawei’s packaging, memory, architecture, and more. SemiAnalysis has been building a state-of-the-art teardown lab in Oregon capable of analyzing the world’s most advanced and important chips over the last year and half. We have already generated revenue on advanced datacenter chip teardowns including our recent reverse engineering of a major TSMC customer’s COUPE CPO optical engine + EIC 3D stack. This is the first public report from the SemiAnalysis Teardown Engineering & Evaluation Lab, or STEEL for short. The lab is aggressively scaling up and out and we’re excited to announce it publicly. This is a bit of inconvenient timing for TechInsights as they are private equity owned and currently being sold while having enjoyed virtually no credible competition for decades. This has led to TechInsights underinvesting in CAPEX. SemiAnalysis exceeds TechInsights in revenue despite no venture or private equity ownership and being founded only 6 years ago. Because we have no external investors and are founder led, we move faster, build faster, and we can release client chip teardowns for free regularly, while focusing on datacenter for our major clients. Here’s the first public image from our lab, the HiSilicon Kirin 9030 Pro SoC: This report will detail our teardown of the Kirin 9030 and our findings on SMIC’s N+3 process, the most advanced in China. For comparison, we’ll show our teardown of the MediaTek Helio G99, made on TSMC N6. Through this comparison, we can look at the effect of export controls – SMIC N+3 and TSMC N6 are comparable nodes, but one is heavily export-controlled, the other free to use the West’s most advanced equipment. Here we see both China’s progress and constraints. SMIC N+3 reaches TSMC N6-class logic density, but it requires far more aggressive DUV multi-patterning, so it does not match N6 on process maturity or cost. The Kirin 9030 Pro performs similarly to three-year-old Android flagships, and trails far behind the current flagship SoCs from Apple, Qualcomm, MediaTek, and Samsung. The efficiency gap is even wider. Export controls have not stopped Huawei and SMIC from shipping advanced silicon, but they have forced a different path. Without EUV, SMIC is leaning harder on DUV multi-patterning, DTCO, and increasingly complex integration. The roadmap continues forward through tighter design rules and backside power, but each step adds cost and process risk. Huawei’s τ scaling and LogicFolding show another path: stacking active logic and recovering density through advanced packaging and system-technology co-optimization (STCO). To understand the Kirin 9030, we must first understand Huawei’s SoC history. HiSilicon is Huawei’s chip design arm, responsible for the Kirin smartphone SoCs, Kunpeng server CPUs, Ascend AI accelerators, and switch/router networking silicon. Before export controls, Huawei was TSMC’s largest customer – the only customer on TSMC’s first EUV node, N7+, and among the first on N5, alongside Apple. That ended in late 2020. Huawei switched to Qualcomm SoCs in its flagship smartphones, though export controls limited them to 4G-only variants. In late 2023, Huawei returned to in-house silicon with the Kirin 9000s, a successor to the Kirin 9000, fabricated on SMIC N+2 instead of TSMC N5. In the following years, they released the Kirin 9010 and 9020 on the same N+2 process. These chips used Huawei’s in-house TaiShan CPU cores and Maleoon GPU. We have not torn down a Kirin 9020 ourselves, so the predecessor die shot is from Kurnal. The die shots show how Huawei spent its silicon budget: which functional blocks are where, and how their areas compare to the predecessor. First, a quick guide to the major blocks on the die. The total die area is nearly identical, but the 9030 uses that area more aggressively. A denser process lets Huawei fit an extra middle CPU core, more GPU and NPU cores, and larger caches into the same footprint. In contrast, the Helio G99 is a much smaller, low-cost SoC, built for budget smartphones rather than a flagship device. While the Kirin 9030 is ~140 mm², the G99 is only ~29 mm², roughly one-fifth the area. The underlying TSMC process technology, however, is directly comparable as a baseline for analyzing SMIC’s. The Kirin 9030 is an evolutionary refresh, not a clean-sheet design. Its CPU, GPU and NPU cores carry over the 9020’s families, and the gains come from three levers: the SMIC N+2-to-N+3 process step, DTCO and floorplan work, and incremental microarchitecture. Area is where the first two show up, and the 9030 scales well here. Performance and efficiency are the harder test. Huawei’s design holds up better than its node would suggest, but the chip still trails, both because N+3 sits behind the leading-edge nodes and because its cores, while competent, remain a few generations behind the newest designs. The new prime core is an incremental update. The main changes are a 10% frequency increase from 2.5 GHz to 2.75 GHz and a doubling in the L2 cache from 1 MiB to 2 MiB. Despite the increased cache, the core size decreased by 7.6%. Excluding the private L2 cache, the core size decreased by 21%. This is a large reduction for an incremental node. Compared with the TaiShan New V120 core in the Kirin 9020, the Kirin 9030’s middle core is almost unchanged architecturally, yet each core shrinks by ~22%. Most of that comes from the move from N+2 to N+3, with layout likely accounting for the rest. Visually, the most noticeable change is the increase from 3 middle cores to 4. There is also a 20% increase in the shared L3 cache of the big cluster. This helps to improve multi-core performance without sacrificing much in terms of area. Even with each core shrinking, the big CPU cluster’s total area is essentially unchanged. The per-core savings went back into an additional middle core and larger caches. The tiny cores shrank less than the prime core (excluding its L2 cache) and less than the middle cores. This is likely because fixed overhead is a larger share on a small core. We cannot resolve any architectural changes from the die shot alone, but the per-clock and efficiency gains shown below point to more than pure process and layout scaling. The area reduction was offset by a doubling of the shared L2 cache from 2 MiB to 4 MiB, leaving the total tiny CPU cluster area slightly larger. Area is the easiest improvement to see from a die shot, but it is only one part of PPA (power, performance, area). For modern logic, power and performance matter just as much, and often more. Since Dennard scaling broke down in the mid-2000s, voltage and frequency have not scaled in step with transistor dimensions, so each node has had to fight harder for gains in performance and efficiency. The starkest comparison is not Kirin 9020 versus Kirin 9030 Pro. Apple’s efficiency cores run circles around Huawei’s prime core. Apple’s low-power core delivers 20% higher integer performance while drawing only 1 W, compared with 4.5 W for Huawei’s prime core. N+3 matches TSMC N6, but N6 is several generations old. Apple and Qualcomm build on N4 and N3P, which are denser and sit on a better voltage-frequency curve, giving them a larger transistor budget and more performance per watt. The 9030’s own cores did improve. The middle and tiny cores gained 17% and 14% in per-clock integer performance over the 9020, with floating-point flat on the middle core and up 11% on the tiny. The tiny core improves cleanly, with performance rising while power falls and efficiency increases by 45% in integer and 24% in floating point. The middle core is mixed: integer performance rises but power rises faster, cutting integer efficiency by 7%, while lower power lifts floating-point efficiency 16%. Per-clock gains at the same or lower frequency are microarchitectural, so the cores are tuned, not just shrunk. Both also failed to hold their rated maximum frequencies, pointing to thermal, power, or stability limits. Per clock, the middle core sits around Arm Cortex-A720 and the tiny core near the Cortex-A520; absolute performance trails because Huawei clocks them much lower. The prime core is roughly Cortex-X2 class per clock, a 2021 design. Apple’s 2020 M1 Firestorm core is still 35% higher per clock and 57% faster in absolute integer performance at a similar 4.5 W. The current leading edge is further ahead again: the Apple M5 P-core is 60% higher per clock and 2.7× faster, the Arm C1 Ultra 45% higher and 2× faster. Matching older high-end cores per clock is a genuine design achievement. What Huawei cannot match is the voltage-frequency curve and transistor budget of leading-edge nodes, which let Apple, Qualcomm and others spend more transistors in the same area on wider cores, larger caches and deeper buffers while running at lower voltage. Huawei’s LogicFolding roadmap is one answer, stacking active logic to recover density and shorten signal paths. We return to it later. The GPU compute units (CUs) changed more visibly than the CPU cores, moving to a more rectangular layout for both the arithmetic logic unit (ALU) clusters and the CU overall. Even with ray-tracing support added, a CU shrank ~28%. However, that shrink is offset by the increase from 4 to 6 CUs and the area outside the CUs grew 33%. Overall, the GPU cluster is larger by ~10%. The GPU is where Huawei makes its biggest gains. The Maleoon 935 is not competitive with current flagships, but it is a large step up from the 920 and reaches older-flagship territory. In 3DMark it is 70% faster in Wild Life Extreme (WLE) and 79% faster in Steel Nomad Light (SNL) than the 920; with 11% higher clocks and 50% more CUs, the ~67% theoretical uplift roughly matches WLE and is beaten by SNL. It edges ahead of the Snapdragon 8+ Gen 1 in WLE and SNL, and the Dimensity 9200 and Apple A16 in WLE, but stays far behind newer parts: the Snapdragon 8 Elite Gen 5 and Dimensity 9500 are ~2.4–2.6× faster in WLE and ~3.2× faster in SNL. The Maleoon 935 is Huawei’s first GPU with hardware-accelerated ray tracing; there it lands slightly ahead of the Exynos 2200, and on par with the Apple A16, with current flagships up to 3.7× faster. The Neural Processing Unit (NPU) saw the largest structural changes of any block, moving from a Lite and a Tiny core in the Kirin 9020 to a Lite and two Tiny cores in the Kirin 9030. Both core types also show significant layout changes. This is a reversal in Huawei’s NPU design. The Kirin 9000 5G, its last flagship chip on TSMC N5, used two Lite and one Tiny core. The series of SoCs on SMIC N+2 moved to one Lite and one Tiny core, likely for area savings. With the Kirin 9030, Huawei has shifted back toward a larger multi-core NPU cluster, but with the additional area going to a Tiny core rather than a Lite core. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Before diving into the process stack, the package and memory are worth separating from the SoC itself. The Pro variant of the Kirin 9030 carries 12 GB of Samsung DRAM, with two stacks of four dies each. The dies were identified as the K4L2E165YD, a 12 Gb LPDDR5X-9600 device fabricated on Samsung’s 1a node, the fourth generation of its 10 nm-class DRAM after 1x, 1y and 1z. 1a has shipped in volume since 2022, so this is current memory rather than older-node inventory. The 16 GB Pro Max variants we obtained were found with both CXMT and Samsung packages. The CXMT package is marked CXDD7JEDM, with two stacks of four dies, packaged in week 45 of 2025. The inferred die dimensions from X-ray computed tomography (CT) are consistent with a known density of ~0.3 Gib/mm² for the CXMT G4 process, roughly equivalent to other manufacturers’ 1z processes. The Kirin 9030 uses a typical integrated package-on-package (iPoP) stack: multiple DRAM dies in a memory package sit above an organic redistribution layer (RDL) interposer, which sits above the SoC and package substrate. The full package is then mounted to the printed circuit board (PCB) through ball-grid array (BGA) solder bumps. The memory package substrate is a thin bismaleimide-triazine (BT) laminate carrying the LPDDR5X stack. The organic RDL interposer over the SoC routes the PoP signals around the die and carries possible dummy thermal copper pillars. The package substrate, a thicker Ajinomoto Build-up Film (ABF) build-up over a BT core, fans the flip-chip bumps out to BGA pitch and embeds the power planes. The whole stack is organic. The only silicon is the SoC and the LPDDR5X dies; there is no silicon interposer. Keeping it all-organic brings the package’s coefficient of thermal expansion (CTE) close to the PCB’s, reducing board-level warpage, and avoids the cost of a silicon interposer the SoC’s bandwidth does not need. In an iPoP stack, the memory package connects to the organic RDL interposer through an array of solder bumps. Underfill fills the gap around those bumps, adding stiffness and protecting the joints from mechanical stress. The Pro and Pro Max variants differ here, which we cover behind the paywall. The die shot and architecture tell us how Huawei allocated its silicon budget. The process tells us what SMIC can manufacture. We use the Helio G99 as the process reference for TSMC N6. Both SMIC N+3 and TSMC N6 are evolutions of previous 7 nm-class nodes. We used targeted TEM cross-sections through logic and memory regions, imaged in both fin-cut and gate-cut directions. Each cross-section caption gives its horizontal field width (HFW), the real width of the imaged area. We start at the transistor fins, then move up through standard cells, local interconnect, and SRAM. SMIC has not overtaken Intel or TSMC. It uses aggressive DUV scaling and DTCO to reach N6-class density, but that density doesn’t translate into comparable performance and efficiency, for two reasons: the node gap to leading-edge nodes, and Huawei’s core designs. Fin Profile One of the most important knobs in a FinFET process is the fin profile: the shape of an individual fin and the channel where current passes from source to drain. The ideal fin is tall, narrow, and nearly vertical. A taller fin increases effective channel width, while a narrower fin improves electrostatic control by thinning the body the gate must control. Push either too far, and the process pays for it: weaker drive current, fragile fins, taper, footing and line-edge variation that hit yield and device variability. The Intel 22 nm, 14 nm, and 10 nm fin cross-sections show how FinFET nodes have improved over time. 22 nm fins were a first-generation structure, relatively short, wide and strongly tapered. The shape limits current density and reduces gate control uniformity across the height of the fin. At 14 nm and 10 nm, Intel pushed the fins taller and narrower while also making the sidewalls more vertical. Rather than shrinking the device, these changes increase the effective channel width per fin and improve electrostatic control. The trade-off is that taller fins at tighter pitches are much more difficult to manufacture. Now, let’s compare the Helio G99 on TSMC N6 with the Kirin 9030 on SMIC N+3. Both processes are in the same class, with fin pitch of 30-32 nm on N+3 and 34 nm in our N6 cross-section. The pitch for N6 is especially interesting as N7’s HD library is generally listed with a 33 nm fin pitch, and N6 did not shrink pitches directly. Its density gains came from DTCO instead of tighter pitches. The 34 nm pitch was stable across our sampled region and serves more as a comparison against the SMIC N+3 we have not investigated further. Pinning down N+3’s fin patterning scheme takes more than one core unit. The CPU cores show a dense ~32 nm pitch, with the pitch between N-P fin pairs alternating between 78 and 88 nm. Logic alone may be consistent with dual-pitch mandrels of 120 and 110 nm, but this is a complex and unusual approach. Combining the pitch from the the 8T SRAM, which has more complex repeat unit, with the CPU core sequence allows us to reverse engineer the patterning steps with more confidence. As both the logic and SRAM should share the same base grid, a single CD mandrel lithography pattern with 128 nm pitch undergoing SAQP produces a die-wide ~32 nm grid (128 nm/4), which supports the pitch sequencing seen in both logic and SRAM cells. In the sampled cross-sections, N+3 shows a taller, narrower, higher-aspect-ratio fin than N6. The measured fin aspect ratio is ~9.5:1 on N+3 versus 7.8:1 on N6. N+3 also shows less top rounding, with an estimated radius of ~2 nm, compared with 2.8 nm on N6. Even though the fin widths differ, the ratio of top rounding to fin width tells the same story, with N+3 at 0.37 and N6 at 0.44. In a geometric sense, lower is better; a perfectly rectangular fin would have no top-rounding penalty. These are single-digit-nanometer features measured from a handful of cuts, so treat the absolute numbers as approximate. The important result is the relative gap: N+3’s fins are consistently taller, narrower and less rounded than N6’s. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Standard Cell A standard cell is the basic building block of chip layout: a fixed-height row pairing one NMOS and one PMOS transistor that share a gate, tiled in a grid to build logic blocks. The key dimensions are contacted gate pitch (CGP), cell height (CH), fin count, and the lower-metal routing grid. To measure density, we use the Bohr metric: a weighted average of NAND2 gate area (60%) and scan flip-flop area (40%). This represents a realistic mix of combinational and sequential logic. This metric has its limitations, especially for complex cell layouts like TSMC’s FinFLEX, which alternates cells with different fin counts. Even so, it is the best metric for a pure process-level comparison. Another important measurement is the fin pitch; it refers to the distance between two fins of the same transistor. In a FinFET process, multiple fins are used in each transistor to increase the drive current and thus performance. TSMC N6 ships both a high-density (HD) library with 2 PMOS and 2 NMOS fins per cell, and a high-performance (HP) library with 3 of each. More fins under the shared gate mean more effective channel width. HP cells switch harder at the cost of area. Designers mix the two on a die, primarily spending HP cells on timing-critical paths, and matching their PPA targets. In the Cortex-A55 core of the Helio G99, we found a cell height of 240 nm for the HD cell. MediaTek has used HD cells in the G99 to minimize die size and thus cost. As an SoC for budget smartphones at ~$100, this is essential. By contrast, we found only one library in the Kirin 9030, with 2 NMOS and 2 PMOS fins. This suggests a narrower library strategy than TSMC N6, where both HD and HP libraries are widely used. This likely reflects the smaller customer base and the more constrained domestic design and electronic design automation (EDA) ecosystem. In all three CPU cores of the Kirin 9030, we found cell heights of 228 nm, 5% smaller than on N6. This is also a reduction of 9.5% over SMIC N+2’s cell height of 252 nm. SMIC N+3 and TSMC N6’s HD library both feature a CGP of 57 nm. For SMIC, this is a 9.5% shrink over N+2. In the past, CGP and cell height alone may have been enough to compare transistor density. Now, however, we must consider scaling boosters and DTCO as well. SMIC’s density gain does not come from EUV. It comes from using every available DTCO booster aggressively. First is fin depopulation: reducing the number of NMOS and PMOS fins in each cell. The first FinFET nodes started with 3 or 4 fins for each transistor. SMIC N+3 and TSMC N6 HD both use only 2 fins per transistor, trading drive strength for density. Next is contact over active gate (COAG). By landing the gate contact directly over the active gate, instead of out over the isolation region, the cell height drops. N+3 integrates COAG while N6 does not. Our N+3 gate-cut cross-sections indicate COAG, with the gate contact sitting over the active region, while N6 shows an off-gate contact. Last is single diffusion break (SDB). Diffusion breaks are inserted between cells in the same row to provide electrical isolation, but they also introduce local layout effects (LLE), layout-dependent shifts in electrical characteristics. In the past, a double diffusion break was used, consuming the space of two CGPs. SMIC N+3 and TSMC N6 instead use SDB, saving area but increasing LLE sensitivity. This must be controlled at the process level and accurately modeled in the process design kit (PDK) so that EDA tools can account for it. Overall, SMIC N+3 has a transistor density of 113.4 MTr/mm², slightly above TSMC N6 at 107.7 MTr/mm². Even without EUV, SMIC has achieved density beyond TSMC’s mature N6 node which utilizes EUV. Metal Stack The smallest critical dimension in the teardown is M0; SMIC N+3 uses a 32.5 nm local metal pitch. That is smaller than the 36 nm M0 pitch on Intel 18A in Panther Lake. However, this does not mean that SMIC has a better process than Intel 18A or TSMC N3P. M0 is a local intra-cell routing layer. Its usefulness depends on the full interconnect stack: M1 and M2 pitch, track count, via and line resistance, design rules, mask count, overlay control, and routing flexibility. The 32.5 nm M0 is consistent with self-aligned quadruple patterning (SAQP), whose four-population line-width loading we read coarsely as alternating widths of 21.5 to 24 nm; M1 and M2, at 38 and 40 nm, are consistent with self-aligned double patterning (SADP), a single A/B split. On TSMC N6, M0, M2, and M3 sit at a relaxed ~40 nm and are consistent with SADP-class double patterning, with no need for quadruple patterning. That said, we measure M2 for example at ~43 nm, likely inflated by sparse routing. We do not assign any specific layer to EUV from our cross-sections; the distinction we can draw is double versus quadruple patterning, not lithography wavelength. Transistor-level density in the front-end-of-line (FEOL) sets an upper bound, but the design is ultimately limited by what the interconnect stack can route. The lowest metals are the most important for standard-cell density, but the semi-global and global layers determine how usable that density is at the block and chip level. Two axes are commonly used for chip cross-sections: the fin-cut and the gate-cut. The micrograph above is a fin-cut and shows metals 0 through 3. This axis lets us see the even-numbered metals, with M0 right above the fins. There are two kinds of M0 lines. The first are the power rails; these are wide wires for the VDD and VSS running horizontally at the top and bottom edges of each standard cell. The wide wires measure 55 nm across, more than double the other M0 lines. Their width minimizes resistance and reduces IR drop. The second kind are intra-cell wires, short segments within the cell that connect terminals to M1. These have alternating widths between 21.5 and 24 nm. The M0 pitch is 32.5 nm, a 19% reduction versus N+2 and N6. At this pitch, DUV patterning requires more aggressive multi-patterning, increasing mask count, overlay sensitivity, process complexity and cost. M0 is below what a single DUV-defined spacer (SADP) can resolve, so SMIC cascades a second spacer step (SAQP). The cross-section reflects the cost: the M0 trenches are visibly more re-entrant (narrower at the bottom than the top) than M1 or M2 on the same chip and carry a bright barrier-rich foot where the trench meets the etch-stop layer. That shape is partly the intended damascene profile, as a slightly narrow bottom helps void-free copper fill, but its magnitude at M0 is driven by the tight pitch and the higher trench aspect ratio. Intel 18A supports an M0 pitch of 32 nm, although Panther Lake has only shipped with a looser 36 nm pitch. This is due to Intel’s heavy usage of HP libraries. Among leading-edge nodes, 18A has the loosest M0 pitches due to PowerVia. With power routing moving to the backside, congestion is reduced, and the entire front-side metal stack can be used for signal routing. M2 is the first true inter-cell routing layer. It runs horizontally like M0 but spans across multiple cells to carry block-level signals. The M2 pitch sets the cell’s track height – the number of M2 tracks that fit between the VDD and VSS rails, defining what the library calls a 6-track or 7.5-track cell. This layer is the most important, limiting the routing of entire blocks. SMIC N+3 features a 5.7-track cell. The M2 pitch is 40 nm, a 5% decrease over N+2 and the same as N6. This shrink keeps the pitch at the edge of what is possible with double patterning. Future nodes will need to increase the number of masks for M2 as reducing the number of tracks is much harder due to the limitations in routing. The micrograph above is in the perpendicular direction, the gate-cut, and shows metals 0 through 4. This allows us to see and measure the odd-numbered vertical metal layers. The M1 pitch is 38 nm, 9.5% less than N+2 and 33% less than N6. The M1-to-gate ratio matters because it sets local routing flexibility. N+2 and N+3 use a 3:2 ratio, while N6 uses a 1:1 ratio, explaining the huge differences in M1 pitch. The more M1 lines there are compared with the gates, the more flexibility there is for power and signal crossing within the cell. Routing flexibility enables more complex and better cells. Clean fractional ratios are also preferred as a grid is periodic and improves layouts. The 3:2 ratio gives SMIC more local routing flexibility than a strict 1:1 grid, but it also complicates layout and patterning. This is a DTCO choice, with SMIC increasing process complexity to recover density and routability without EUV. This 3:2 ratio is not very popular in the leading-edge nodes. TSMC has only used it on N7+, the N5 family, and the short-lived N3(B). They have switched back to a 1:1 ratio for N3E. Intel has only used it on the 10 nm/Intel 7 family, with Intel 4, 3 and 18A all using a 1:1 ratio. Samsung is the only one still using a 3:2 ratio at the leading edge, using it in the SF4 and SF3 families. It remains to be seen if SMIC will remain at a 3:2 ratio or move to a 1:1 ratio with its future nodes. The industry is still actively exploring these local-routing ratios. At VLSI 2026, imec will be presenting work on even higher ratios, including a 2:1 scheme that can reduce area by up to 14%. We will be covering the conference in a future newsletter article. Subscribe We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. The final local interconnect layer for N+3 is M3, with a pitch of 44 nm. The M3 pitch is the same as on N+2 and 10% larger than on N6. The semi-global layers carry the majority of block-level signal routing. They have a coarser pitch than the lower local layers. On leading-edge nodes, they are designed to sit at the limit of DUV single patterning. M4 through M11 pitches were found divided between 80–82 nm (M4–M6), 128 nm (M7–M10), and 148 nm (M11). Given limited sampling, it is possible these are divided further in dense routing areas. At the top are two giant metal layers, M12 and M13. These have kept the same pitches as N+2 at 1920 nm and 4600 nm respectively. While the lower layers’ pitches are generally fixed by the process and library, the upper layers vary much more in pitch and count, depending on the design. Even two smartphone SoCs on the same process can have wildly different metal stacks. The Helio G99 carries fewer routing layers, reaching coarse metal pitches of 850 nm by M9, while the larger and higher-performance Kirin 9030 keeps fine pitches until M11. SRAM At the leading edge, SRAM is much more difficult to scale than logic. TSMC’s latest nodes have seen little to no bitcell scaling, while logic still has more DTCO levers to pull. While looking for other logic libraries in the GPU compute units, we stumbled upon the SRAM. The most common type of SRAM has 6 transistors (6T), but this cell had 8 transistors (8T) instead. 8T SRAM adds two transistors to form a dedicated read port. Unlike a 6T cell, where reading disturbs the storage, the decoupled read port removes read-disturb, improving read stability and letting the cell be pushed harder for performance. At first glance, the cut looked like an unusual logic library, with each cell row having 3 fins of one polarity and 5 fins of another. The rows also alternated in orientation. Energy-dispersive X-ray spectroscopy (EDS) resolved our confusion. The cut had not landed on the GPU logic, but on the SRAM macro beside it. The unusual fin pattern was due to the SRAM library. We return to EDS in the process flow analysis behind the paywall. SRAM libraries are not like traditional logic libraries. Due to the unequal number of PMOS and NMOS transistors, they require specialized rules and layout libraries. They do not need the flexibility of logic libraries, so they are hyper-optimized for one purpose: dense, reliable memory. The SRAM cell we found is a 1:2:2-2:2 cell. This means there is 1 fin per pull-up (PU) PMOS transistor, and 2 fins per pull-down (PD) and pass-gate (PG) NMOS transistor. These 2 PU, 2 PD and 2 PG transistors would usually form a single 6T high-current cell (HCC). An 8T HCC adds a read-pull-down (RPD) and a read-pass-gate (RPG) NMOS transistor, each with two fins. We measured a cell height of 406 nm, which brings the bitcell size to 0.0463 µm². That is a theoretical peak density of 21.6 Mib/mm². We estimate that a 6T HCC would have a cell height of 292 nm and a size of 0.0337 µm². This is ~12% larger than a 6T HCC on Intel 3 and 4. We also estimate the 6T high-density cell (HDC) to have a cell height of 228 nm and a size of 0.0260 µm². This is coincidentally the same as the logic standard-cell height measured earlier. The estimate puts the cell near Samsung 7LPP/5LPP and slightly below TSMC N7/N6. That is a theoretical peak density of 38.5 Mib/mm². 6T HDC is arguably the most important cell as it is used for the largest caches in a chip, the L3 caches and system-level cache (SLC). Both the Kirin 9020 and 9030 have split the SLC into 4 banks to raise total SLC bandwidth. In the Kirin 9030, the SLC increased from 2 MiB to 3 MiB per bank. Correspondingly, the number of arrays within the bank also increased by 50%, from 16 to 24. Each array can store 128 KiB and forms an orderly pattern on the die shot. From the Kirin 9020 to the Kirin 9030, the area of a 128 KiB SLC array decreased from 0.0477 mm² to 0.0392 mm², an 18% shrink. The achieved density is 25.5 Mib/mm², 66% of the theoretical maximum. While the SLC was quite similar across both chips, the L3 has seen some major changes, particularly in terms of its layout. The total capacity also went up from 10 MiB to 12 MiB. Much like the SLC, the L3 is also split into 4 banks. In the Kirin 9020, an L3 bank consisted of 16× 128 KiB arrays and 16× 32 KiB arrays. However, an L3 bank in the Kirin 9030 instead consists of 48× 64 KiB arrays. In the Kirin 9020 L3, a 128 KiB array was 0.0513 mm² and a 32 KiB array was 0.0154 mm². The size of the 128 KiB array is different on the L3 and SLC as the assist circuitry for the two arrays differs depending on their purpose. In the Kirin 9030 L3, a 64 KiB array is 0.0210 mm². Although not a like-for-like comparison, normalized for capacity, it is 18% smaller than the 9020’s 128 KiB L3 array and 31% smaller than its 32 KiB L3 array. The achieved density is slightly lower than the SLC, at 23.8 Mib/mm², 62% of the theoretical maximum. Unlike the L3 and SLC, the prime cores’ private L2 cache uses a 2-bank design. As the prime cores’ L2 is latency-critical, it likely uses 6T HCC instead of 6T HDC. The 9020 has 16 arrays in each bank while the 9030 has 32. Each array has a capacity of 32 KiB. A 32 KiB array in the L2 shrank from 0.0171 mm² to 0.0142 mm², ~17% smaller. The density is 17.6 Mib/mm², ~59% of the theoretical maximum for 6T HCC. SRAM scaled well from N+2 to N+3, shrinking by ~19%, close to the theoretical logic shrink. The caveat is that N+2’s bitcells were unusually large, bigger than comparable 7 nm-class nodes, so part of the gain is catch-up rather than true scaling. With the insights from STEEL’s teardowns, we will be doing a deep dive into SRAM in a future newsletter article. Subscribe Everything above came out of a single STEEL teardown: die annotation, block-level area analysis and TEM cross-sections through logic and SRAM. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Future Roadmap The same cross-sections that pin down N+3 also show where SMIC can go next. Although N+3 is already close to the practical limits of DUV multi-patterning in several layers, SMIC still has a few scaling levers left. A theoretical N+4 would likely start with cell height. N+3 uses 5 M0 tracks between its power rails. Moving to 4 M0 tracks, as on SMIC N+2 and TSMC N6, could reduce cell height by roughly 15%. The routing grid is only one side of the shrink; the front end also must fit into the smaller cell. One possible FEOL lever is reducing the p-to-n isolation spacing from two diffusion grid units to one. Intel used this scaling booster on Intel 4, and TSMC did so on its N3 family. This path trades layout flexibility for density. Fewer M0 tracks reduce local routing resources, while tighter p-to-n spacing raises integration and design-rule difficulty. M2 is also constrained by the cell height shrink. For SMIC to maintain a ~5.7-track cell, M2 would need to move toward ~35 nm. That would move another layer into SAQP territory. SMIC could also reduce the CGP from 57 nm to 54 nm. Intel reached a similar CGP on Intel 10 nm/Intel 7 without EUV. The local interconnect is also tougher. If SMIC keeps the 3:2 M1-to-gate ratio, M1 would need to shrink to 36 nm and would likely require SAQP as well. If SMIC moves to a 1:1 ratio, M1 could relax to 54 nm, but it would give up routing flexibility. Under this theoretical path, we estimate that SMIC N+4 could reach a cell height of 198 nm and a CGP of 54 nm, implying a Bohr density of 137.8 MTr/mm², on par with TSMC N5 or Samsung SF4. However, the difficulty is cumulative. Each step is individually plausible, but together they make N+4 harder than the transition from N+2 to N+3. It will likely take longer, cost more, and carry less process margin. A theoretical N+5 would require a larger integration shift. One possible path is backside contacts (BSCon), moving power routing and source/drain contacts to the backside, which would reduce front-side routing pressure and enable another reduction in cell height. The front-side metal pitches could relax to reduce the process complexity. M0 would likely relax slightly to ~34 nm, and M2 and M4 pitches could relax further. CGP is unlikely to shrink much further. Even with EUV, 48 nm has been the practical limit for yield and process control. This approach would allow N+5’s cell height to fall to 170 nm and its CGP to 53 nm. This implies a Bohr density of 163.6 MTr/mm², on par with Intel 18A’s HP library. However, this would not make N+5 cost-competitive with the leading edge. It would reach a similar density through a much more expensive route. The integration difficulty rises sharply, with new process flows for backside alignment, wafer thinning, contact reveal, and backside metallization. Past this point, standard density and interconnect scaling become increasingly unattractive. That is where Huawei’s roadmap stops looking like a normal foundry roadmap and starts looking like a packaging roadmap. At ISCAS 2026, Huawei unveiled its tau (τ) scaling law, reframing process scaling in the time domain. τ is the time cost of data movement and processing: switching delays in transistors, RC signal propagation delays in circuits, compute, memory, and networking latency. Outside Huawei’s terminology, this is called system-technology co-optimization. This is Huawei’s answer to its lack of EUV lithography. Without EUV, planar density cannot keep pace with TSMC, Intel, or Samsung. If transistor density cannot shrink further, Huawei’s alternative is to shorten wires, reduce buffering, and stack logic vertically. “LogicFolding”, Huawei’s implementation of this new scaling idea, is, in practice, an aggressive 3D stacking approach. AMD V-Cache places SRAM above or below a CPU die. AMD’s MI350X places active interposer dies (AIDs) underneath accelerator and compute dies (XCDs), with the AIDs handling cache, IO interfaces, the network-on-chip (NoC) and embedded metal-insulator-metal (MIM) capacitors. With LogicFolding, parts of the same logic block are split across multiple active dies bonded face-to-face at ultra-fine pitch. This allows Huawei to shorten some critical paths and reduce buffer overhead, not merely add cache capacity or offload the IO and interconnect. Shortening wires is where the higher clocks come from. A large share of a modern core’s delay and energy budget goes into driving long interconnects and the repeater buffers along them. LogicFolding distributes a block’s critical-path gates across multiple stacked tiers bonded at a very fine pitch, so the bond interface behaves like an additional metal layer and the longest paths get shorter. That is how Huawei expects to recover frequency and efficiency it cannot get from the process alone. Huawei’s roadmap shows its intent. Prime core frequency is targeted to rise from 2.75 GHz in the Kirin 9030 to roughly 5 GHz by 2031, far beyond what planar scaling alone could deliver. Prime cores with 3.1 and 3.39 GHz clocks are being tested in its labs, although their power consumption is unknown. Beyond that, chips are in the design, simulation or pathfinding phase, meaning the frequencies are targets. However, the direction matters more: LogicFolding also helps with performance, not just density. The catch is that Huawei’s density claim is not directly comparable to foundry densities. A stacked design can report more transistors per package footprint by adding active layers, even if each patterned die remains well behind TSMC or Intel in front-end density. This is how Huawei can claim to reach foundry 14A-equivalent density by 2031. This is not a like-for-like foundry comparison, with Huawei using stacked logic and measuring density per package footprint. On a normalized Bohr-density basis, SMIC N+3 is ~114 MTr/mm², 38% less than Intel 18A’s HD library. Huawei’s 3D roadmap closes the gap by stacking active logic, reaching 215 MTr/mm² by 2030. In 2031, the roadmap density jumps to 295 MTr/mm², implying either a third active layer, partial EUV insertion or aggressive planar DUV scaling. Huawei’s methodology makes other foundries look much denser as well. Applying it to AMD’s MI450X with an N2 top die on an N3P base die yields a theoretical density of 460.2 MTr/mm² in 2026, compared with Huawei’s 295 MTr/mm² in 2031. This Kirin 9030 does not use LogicFolding, remaining in a conventional mobile SoC package. Instead, it forms the baseline for how far Huawei and SMIC can push planar scaling. Future teardowns of Kirin and Ascend chips will show both planar logic density and Huawei’s hybrid bonding solutions. Export controls changed China’s optimization problem rather than ending it. EUV restrictions raised the cost and complexity of leading-edge manufacturing without freezing it. SMIC reaches N6-class logic density through DUV immersion, SAQP and DTCO, while Huawei shifts more of the burden onto architecture, packaging and system-level integration. Future nodes will be tougher. N+3 still had room to tighten local metals and reduce cell height and CGP. Further scaling without EUV leaves fewer levers. More aggressive multi-patterning adds masks and overlay error. SMIC can keep pushing DUV, but each step will get more expensive and less forgiving. The design side is just as critical. Huawei had domestic EDA tools and flows before the Kirin 9030, with the Kirin 9000s, 9010 and 9020 making that clear. Huawei was able to ship multiple consumer SoCs on SMIC N+2 and N+3 while cut off from the Western EDA stack. US export controls restricted EDA tools for advanced chips in 2022 but did not target tools for more mature chips. In 2025, the US government briefly placed much broader restrictions on EDA software from Synopsys, Cadence, and others, before lifting them less than two months later as part of a trade deal tied to rare earths. Huawei has been unable to access those tools because it remains on a US trade blacklist. That forced Huawei, SMIC and Chinese academic institutions to build their own tools and flows. Researchers at Peking University recently announced a prototype EDA tool for Huawei’s LogicFolding architecture, which requires a new flow to handle the multilayer layout and floorplan. This is not the same as replacing the full Synopsys or Cadence stack, but it shows where domestic EDA is headed: toward tighter co-optimization between architecture, process and packaging. These advances are also diffusing into the Chinese ecosystem. SMIC is licensing its N+2 and N+3 processes to HLMC/Hua Hong at the government’s direction rather than by choice. If the same process learning feeds into Ascend accelerators for AI training and inference, the choke point shifts from one named fab to an ecosystem. Alibaba’s T-Head silicon arm and Cambricon, a Chinese AI chip designer that is expected to supply ByteDance, could also be major beneficiaries. Sanctions aimed at SMIC alone become less effective once the manufacturing knowledge has spread to other fabs and design houses. China is not closing the gap with Intel, Samsung and TSMC. The teardown shows the opposite in several places: no EUV, no backside power, higher process complexity, and visible trade-offs. But China is still advancing. If domestic chips become good enough for phones, inference, networking and security-sensitive workloads, they can matter strategically without matching TSMC at the leading edge. Behind the paywall, we show what else STEEL can do, with material and process flow analysis of SMIC N+3, and analysis of the Kirin 9030 package. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline, access the full Kirin 9030 and SMIC N+3 analysis or to commission a custom teardown, contact sales@semianalysis.com.
Scientists crack a decades-old CO2 problem and triple fuel production
A new catalyst design could significantly improve the conversion of CO2 into methanol, an important fuel and chemical feedstock. Researchers separated key reaction steps across different catalyst sites, avoiding a long-standing trade-off between speed and efficiency. The result was about three times more methanol production than standard commercial catalysts.
Scientists found a surprising problem with sugar-free diets
A surprising new study suggests that completely eliminating sugar may backfire. Mice on a sucrose-free low-fat diet showed worse blood sugar control, increased inflammation, disrupted gut bacteria, and signs of fatty liver compared with mice that consumed some sucrose. Researchers say the results highlight the importance of a balanced diet and a healthy gut microbiome rather than focusing solely on cutting out sugar.
Opinion | Dennison: I’ll fight for responsible spending, reducing unnecessary regulations and help small business and more if elected
Like many Coloradans, I’ve grown increasingly frustrated watching Washington become more focused on partisan gamesmanship than solving real problems. Families, workers, retirees and small business owners across Colorado are facing challenges that politicians love to...
Trump at 80 Works to Project Strength As Political Woes Mount
President Donald Trump is trying to project brute strength as he turns 80, but mounting political problems at home and abroad are tarnishing his self-styled image as an all-powerful leader.
In Retrospect: Poland, Russia, Europe
In April I spent a few days with Zryw, a Polish non-profit organization that recruits young people to enter politics and public life. Their aim is to build a new generation of civic leaders in Poland. I’ve followed their evolution from the beginning; my son is one of the founders. (“Zryw” means “impulse” or “burst of speed” in Polish). Julie Chmielewska, one of Zryw’s leaders, interviewed me at the event. Here is the conversation, lightly edited for grammar and context: Julia Chmielewska: Assuming that culture shapes institutions, could we conclude that some cultures are more prone to authoritarianism? Anne Applebaum: I don’t think so. Every culture, every nation, and every country has the potential for change. When we look at history, we can see that nations do change. Poland has changed, for example, from the 1980s to today. There’s a completely different mentality here than the one I encountered when I first visited, in 1988. The current generation sees the world through a different frame. So no, I don’t believe that certain nations are doomed to authoritarianism, or to anything. Of course, there are political and cultural traditions, but they can always be challenged. JC: So do you think there’s something intrinsic in human nature that pushes people to democracy, freedom? AA: I think there is something in human nature, a deep instinct, that pushes people towards freedom, yes. People who live in authoritarian countries – and I’ve heard this from them over and over again – sooner or later find themselves angered by a feeling of helplessness. They can see the unfairness of crooked courts, irrational political decisions. They naturally dislike the fact that somebody has all the power while they have none. In those circumstances, people who have no political background at all sometimes are politicized just by that frustration. I’m thinking of Svetlana Tikhanovskaya, for example, who was a Belarusian housewife, until the circumstances of her husband’s arrest forced her to become a politician. I met a woman who is a Uyghur from China, and who had come to live in Turkey. After several of her family members were arrested, she too was propelled into a political role. These kinds of experiences make people interested in democracy or political reform, even if they thought they didn’t care. I also think that the opposite is true: some people instinctively prefer homogeneity, order, hierarchy. They don’t like the confrontation of opinions or the noise of debate, and they lean towards a single leader or a unified regime. I think that most of modern history is shaped by the clash between those two different sides of human nature. JC: Which force do you find more powerful today? AA: I think they both have a lot of power and there’s no way of predicting who wins. Even in countries that seem very shut off or stuck in an authoritarian system can change. We’ve seen that happen. And vice versa, I think democracies can also begin to fail and slide into authoritarianism. So it’s very important not to be complacent in either direction. JC: I want to go into your history and your experiences. You’ve lived in Russia during a time of incredible change in the late 80s, and then you came back to do research in post-Soviet Russia. AA: I was a student in Russia just before the collapse of the Soviet Union. I then traveled and worked there extensively in the 1990s, and I met people who really were full of hope. They hoped that Russia could become a democracy, or at least a place that guaranteed freedom of speech, freedom of the press. These weren’t ideas that came from Washington. Although now the narrative in the Kremlin is different, I met many people who were working towards exactly that kind of transformation. A friend of mine ran a series of seminars – once a year, and then later several times a year, in cities all over Russia – designed to get people to discuss politics in new ways. She invited young politicians and journalists, as well as foreigners. I went to many of them, in Moscow as well as Volgograd and Novosibirsk. Over two decades, hundreds of people came to these seminars, and all of them wanted Russia to be different. I remain convinced that many Russians still want Russia to be different. It’s just that the old system, in the form of Putin, a representative of that system, returned. The KGB reimposed their power. And this wasn’t because of something to do with culture, this was to do with money and politics, and who was in charge. JC: You’ve partially answered my question... I wanted to ask whether that excitement of the 1990s was an exception from the Russian historical norm which has been rather authoritarian? AA: Of course, if you look at the history of Russia since the 18th century, there have always been liberal groups, reformers and revolutionaries. There were the Decembrists, in the early 19th century, and the rural populists later on, who tried to organize the peasantry. A significant group of liberal Russians appeared at the turn of the 20th century, people like the father of the writer Vladimir Nabokov, who was a Russian politician before the revolution. These groups were small in number, but sometimes had a broader significance. The Russian dissident movement in the 1950s and 1960s actually invented the modern human rights movement. It was their idea to hold the leaders of the Soviet Union accountable for the language they used, to remind them of the treaties they had signed and the promised they had made. They created the Helsinki group, for example, that held Soviet leadership to the language of the Helsinki Treaty, which formally ended the Second World War and which contained guarantees of human rights, at least on paper. That idea spread to Eastern Europe, and similar tactics were used here in Poland. (Benjamin Nathans recently wrote a great book about the Soviet dissidents, To the Success of Our Hopeless Cause) JC: But seemingly, even if they do ever get power, they could never hold on to it. AA: We don’t know, because they have never really had power. But in any case, we also don’t know what will happen in the future. There is no reason to assume that Russia will forever be condemned to totalitarianism. Even during the first fifteen years of Putin’s regime there was some form of democratic politics. Only when the full-scale war began did he bring everything to an end: he shut down all remaining independent organizations and killed his most important opponent, Alexi Navalny. But does that mean he is popular, that he enjoys legitimacy? Even now, we don’t really know what Russians think about him, or about the war. There is no way of doing real polling in Russia because nobody will answer an independent pollster over the phone. JC: Do you think that the flock of young people, especially young men, who fled Russia after the start of the war represent a continuation of liberal movements that refuse to partake in the authoritarian state, or do you think they are moving for the sake of self-preservation – “I don’t want to go to the army, so I leave”? AA: I’m sure it’s both. I actually know many people who left Russia for political reasons either in the very last years before the war, or else just after the war began. JC: And do you see a change in the young generation versus the old one that have fled? AA: It’s hard for me to say because the people who I know were mostly already politicized. I do know some younger people who left, but most of them were already either active in the opposition, or working as journalists. Many of them very self-consciously think of themselves as maintaining Russian culture abroad, just as in the 20th century the Soviet dissidents or the anti-communist White Russians once thought of themselves as people who maintained the true Russian culture, outside of Bolshevik Russia. JC: Let’s move on to Poland. One of your first experiences with Poland was reporting on Margaret Thatcher’s first state visit, in the autumn of 1988. You followed her around the farmers’ market. AA: She was making a symbolic gesture. She wanted to welcome free markets, but the only one she could really visit was the farmers’ market at Hala Mirowska. JC: And I want to talk about this area because today you can look out of any window in that district, Mirów, and see rows and rows of skyscrapers. How does it feel to see a country built from the ground in such a short time, both politically and economically? AA: You know, when you’re living in a period of dramatic change, it’s always hard to know whether the change is positive or negative. The transformation in Poland created winners and losers, as well as new classes of people, new political movements of different kinds. At the time, it sometimes just felt like turbulence. Now, we can look back at the 1990s and early 2000s in Poland and see in retrospect that the country was headed in towards prosperity and European integration. In around 2009 or 2010, I remember speaking to a woman who worked cleaning government offices, and who asked me if her daughter should study in Amsterdam or in London. This seemed to me to be a real transformation, and it happened very fast: within a few years, Poles stopped feeling like second-class Europeans, and a generation of younger Poles appeared who had no qualms about crossing borders. JC: We again live in turbulent times. Do you think we’re heading towards positive outcomes? AA: I can’t make predictions, because everything that happens tomorrow depends on what people do today. Also, history doesn’t have a trajectory. It doesn’t move in a particular direction. You only think it does afterwards. As I said, you can look afterwards at Poland in the 1990s and you could say this was a period of great progress. But not everybody at the time saw that. Sometimes people are very wrong about a given country’s trajectory. I remember people writing about Ukraine in the 1990s, about how dangerous it was that Ukraine was independent, that this was going to be an anti-semitic state, that Ukrainian nationalism was going to come back... and although you can say many bad things about Ukraine, the country made many bad choices, actually it became a pretty tolerant state which now has a Jewish president and until recently a Muslim defense minister. JC: In the 1990s Poland’s and Ukraine’s GDP were roughly similar. Ukraine was even a bit richer. So the starting point was similar for both of these countries, but they’ve turned out very, very differently. Even if we stop in 2014. Why do you think Ukraine “chose East”? Was it external influence? AA: No, I think Ukraine was in a different position. First of all, central and eastern Ukraine had been part of the Soviet Union since the 1920s, and had therefore experienced a longer period of occupation, repression, Sovietization and even Russification. Ukraine did not have, as Poland did, an alternative elite: a large cadre of economists and politicians, who already had some experience in opposition politics and in independent thinking. In Poland, the transformative finance minister, Leszek Balcerowicz, had already thought about how an economy might be decentralized before he took office. We can argue about how successful he was, but at least he was prepared to try something new. In Ukraine, people weren’t prepared. For one, there hadn’t been much space even for an illegal opposition in the previous couple of decades. Ukraine was also in many ways still emerging from colonial occupation. For the previous couple of centuries, many of the most capable Ukrainians had moved to Russia, and the first generation of leaders in independent Ukraine tended to be former Soviet apparatchiks. They didn’t immediately seek to become closer to western Europe. Instead, they looked for some kind of economic and political “third way” and an accomodation with Russia. Ukraine became stuck in this position, half-in, half-out and became pretty profoundly corrupt. JC: The Polish alternative elite had a vision of where they wanted the country to go. I think the general perception now is that this vision ends with the next election, right? Is this a natural process of gaining power? AA: Their vision, and it was shared by the time by politicians who now call themselves both left and right, was that Poland should join the EU and NATO, as fast as possible. My husband (Radek Sikorski) was in the very first government that said it wanted to join NATO. At the time this was taken very badly in Washington: the demand for NATO membership absolutely came from Poland, not from the US. But even then, in the early 1990s, many Poles already understood that the Russian sphere of influence would grow once again, that it was important to become part of the transatlantic alliance and an integrated Europe as fast as possible: NATO, the EU, the Council of Europe, all of the trading and security alliances. That consensus lasted through several different governments and over many years, even governments containing former communists. For twenty years, right, left and center disagreed about many things, but they all agreed on the direction that the country should go. In retrospect, that consensus created the basis for prosperity in Poland. JC: And regarding the Polish-Ukrainian relations. We know that antagonisms, e.g. the myth of Wołyń [a massacre of Poles that took place in what is now Western Ukraine, in 1943] are increasingly used in Polish political discourse today. In Ukraine, nationalist historians make heroes out of UPA, the Ukrainian revolutionary army, which is held responsible for this tragedy. Where do you see a start for burying the hatchet? Is the reconciliation of our nations possible? AA: So here’s a strange thing: For more than a decade after they both gained independence, Poland and Ukraine participated in a number of projects that were designed to solve exactly these kinds of Polish-Ukrainian differences. Books were published that were jointly written by Polish and Ukrainian historians, monuments were built. These projects were successful: If you’d asked me this question in 2010, I would have said that there are no real historical issues between Poland and Ukraine, that the two countries had mostly reconciled. For a number of reasons, this began to shift. In Poland, children and grandchildren of victims of the Wołyń massacre felt their tragedy hadn’t been fully recognized. In Ukraine, nationalist groups wanted the UPA partisans who had fought against the Soviet Union recognized for their heroism, despite the fact that some in this broad and not well-defined group were also linked to Wołyń. In both eastern Poland and western Ukraine, the memory of the ethnic cleansing that took place there in the late 1940s - Poles were moved West, Ukrainians East - to accomodate new borders has left feelings of displacement and bitterness. The wave of Ukrainian immigration, which started before the war, may have provoked some of this. But don’t underestimate the role played by Russia, which has always wanted to create discord between Poland and Ukraine, and pumps out propaganda to that effect in both countries. Vandalism on both sides of the border, damage done to cemeteries and monuments, is sometimes carried out by provacateurs working for Russia, just to create bad feelings. The Polish-Ukrainian conflict also hides a different reality: although there are real grievances and bad memories, the truth is that the biggest tragedies both nations experienced in the twentieth century were inflicted by the Soviet Union and Nazi Germany. That should unite these two countries, not divide them. JC: This week (19.04.2026 – Ed.) in Hungary we saw that using historical narratives to create grievance has no longer worked. Are you optimistic about the direction after Orban’s loss? AA: The Hungarian election was really important because it shows that people can actually resist powerful, dominant propaganda. The ruling party Fidesz controlled all of the TV, 90% of the newspapers, the constitutional court, the bureaucracy... and yet people had the nerve to vote against it and resist it. It’s also an important election because Hungary created a huge network of well-funded think tanks and foundations that were funding other far right groups and projects. So that loss is going to have a knock-on effect in other places too, maybe even in Poland. JC: What you’ve said about resisting propaganda reminds me of one of the interviews you did about talking to Russians in the post-Soviet era who claimed that people knew that the system was lying. Why do people choose to believe in these regimes anyway? AA: Because it’s useful. Stephen Kotkin, an American historian, once described how people would learn how to “speak Bolshevik”: It was just a language that you needed to use in order to get by in society. If you didn’t talk the way the regime wanted you to talk, then you might have problems, or lose your job, or your kids would not get into university. It was a way of getting along. Communist Poland was similar, at least in the early years. When I was writing a book about the Sovietization of Eastern Europe after World War II, I met a lot of people who wanted to talk a lot about the war, when many of them had done really heroic things. But almost nobody wanted to talk about the decade afterwards, between 1945 and 1956. This was when you had the short period of terror, violence and Polish Stalinism. To stay safe, people felt the need to just go along with what others were saying, or stay out of politics, or use communist jargon without necessarily believing it. I don’t judge them for it, and I wouldn’t describe all of those people as collaborators. It’s easy to feel moral certainty in retrospect, because we know that communism ended. But if you were living in 1949, it might not have been clear to you that communism was going to end. In very repressive societies, maybe about 10% of people who are really evil – collaborators, torturers. Maybe 10% of people are really brave and who find ways to resist. And then around 80% of people have kids, they have parents, they have to have jobs and they’ve had to get through it somehow. Strange though it may sound, I’ve found that the work I did on that book is now very useful in explaining some of what’s going on in the United States today. There are plenty of members of the Republican Party in Congress who know perfectly well that Donald Trump says many things that aren’t true. But they avoid criticizing him because it’s inconvenient, because they would get in trouble, because someone would attack them on the internet. So actually you don’t even need mass terror to get people to conform. JC: Is Gen Z reinventing agency? AA: We’ll see. In any generation you can find groups of people who want agency. If you live in a society that’s unfair, for example where a tiny number of people have captured most of the wealth, then at a certain point people rebel. This is always easier for younger people, who have you have less to lose. The question now is how the internet will affect the relationships between citizens and the state, and how it will change organizations. The “Twitter revolutions” people spoke about as early as 2008-9, mass protests organized online, have often proved to be very superficial. Although you can easily join something just by clicking, the work of creating a real movement requires physical participation. Successful mass movements of the past, for example the Civil Rights movement in the United States, were built by people who had spent many years together. They had participated in non-violent workshops together. They practiced and prepared. Just using the you can get everybody to show up at a certain moment, but then when the protest is broken up, nothing happens. It’s also true that the repressive regimes have more recently learned how to use the internet to undermine leaders and movements. Most of all, they now understand how to make people cynical. The form of propaganda that most modern authoritarians use - and I think the Russians really pioneered this - deploys sneering cynicism. Instead of praising the rulers, the regime propagandists mock the opposition movement leadership for being supposedly corrupt or sexually degenerate, with the goal of undermining any kind of idealism. JC: MAGA grew on the internet? AA: MAGA is a real grassroots movement. They had symbols, red hats, they showed up at rallies. But you’re right that the cynicism, the sarcasm and the distrust that the movement embodies came originally from the internet, and this is different. Fifty years ago, most European political parties had a social base in real organizations, in trade unions for Social Democrats, in church groups for Christian Democrats. As people stopped going to church and as the trade unions became smaller, the social base of these parties disappeared. Now people who wouldn’t have known one another in the past meet on the internet and create new movements, many of which don’t last. JC: Is history ending? Going in stale circles? AA: History never ends. In truth, human beings want contradictory things at the same time: order and freedom, stability and change. These things are never resolved, and when a society swings too far in one direction, people always push it the other way. But each time that happens, the result is different. Certainly it is true that we are now in a period when old philosophers and ideas from the 1930s are undergoing a revival. Carl Schmitt, who was a philosopher who was very influential on the Nazis, is back as an influence on both the far left and the far right, once again inspiring people to think that all politics has to be existential, that all politics is about defining and defeating enemies. In the US, some are also bringing back dominionism, the idea that we need a Christian and not a secular state. It’s also true that we are living through a more fundamental shift. The old left-right divide, which was mostly about the size of the state, is much less important now. Instead, we are arguing about more fundamental things: what are our rights, what protects our freedom. Or how much power do we want to give small elites, versus how much power to give ordinary people. In America a small group of very wealthy people now control information, because they control the social media platforms and AI, which means they determine what people will read and learn. Finding a way to preserve preserve zones of autonomy and independent thinking, this is going to be the main task for the next generation. JC: What is the one book that a person interested in Central Europe should read? AA: You could read my book “Iron Curtain: the Crushing of Eastern Europe” which tells the story of how the Soviet Union imposed its culture on the region. Or read Tim Snyder’s history of the region, “The Reconstruction of Nations: Poland, Ukraine, Lithuania, Belarus 1569-1999.” And everyone should read “The Captive Mind” by Czesław Miłosz, which describes exactly the phenomenon we were talking about: why do people collaborate? I joined Scott Galloway and the brilliant Fiona Hill in a discussion about the wars in Ukraine and Iran, the future of global power, and what these conflicts reveal about America's role in the world. Scott told us that this was the 400th edition of his podcast, which is quite a number: My friend Francesco Chiamulera runs a brilliant series of literary events, Una Colline di Libri, A Hill of Books, in the Prosecco Hills, a region of vineyards and elegant hill towns in the Veneto, north of Venice. We did an event in Vittorio Veneto and also drove and biked around the countryside. Buy Autocracy Inc Buy Iron Curtain Open Letters, from Anne Applebaum is a reader-supported publication. To receive new posts and support my work, consider becoming a free or paid subscriber. Subscribe
Political blame game follows as screwworm parasite threatens cattle in Texas
Screwworms are on their way to becoming a billion-dollar international problem but can be contained if ranchers are vigilant, watch their herds and other wildlife, and quickly treat any infestations, U.S. Agriculture Secretary Brooke Rollins said.
Dodgers notes: Shohei Ohtani, Justin Wrobleski, Tanner Scott
Shohei Ohtani has set the baseball world on fire on the mound despite his most recent start on Wednesday, and he’s been picking up the pace with the lumber as well since May 12. Ohtani capped off the three-game set in Pittsburgh with his second home run in as many games while reaching base four […]
New series with veteran science journalist Miles O'Brien to feature ASU researchers
Extreme heat kills more people than hurricanes, floods and tornadoes combined in a typical year, but people don't recognize it as a serious problem. Why is that?That was the question veteran science journalist Miles O’Brien asked Arizona State University heat researcher Jennifer Vanos in front of a studio audience at Arizona PBS on Thursday.
Brendan Sorsby isn’t a victim. He’s the latest face of America’s public health crisis
Texas Tech QB's injunction may allow him to play, but the problem remains: Online betting and a growing gambling addiction among young men.
Dodgers Announce Justin Wrobleski News During Pirates Game
Los Angeles Dodgers breakout star Justin Wrobleski exited Thursday's start early.
Dodgers vs. Pirates game chat
Justin Wrobleski and the Dodgers face the Pirates before heading off to Chicago for a three-game set with the White Sox. Thursday’s game info
Opinion | Dennison: I’ll fight for responsible spending, reducing unnecessary regulations and help small business and more if elected
Like many Coloradans, I’ve grown increasingly frustrated watching Washington become more focused on partisan gamesmanship than solving real problems. Families, workers, retirees and small business owners across Colorado are facing challenges that politicians love to...
Opinion | Dennison: I’ll fight for responsible spending, reducing unnecessary regulations and help small business and more if elected
Like many Coloradans, I’ve grown increasingly frustrated watching Washington become more focused on partisan gamesmanship than solving real problems. Families, workers, retirees and small business owners across Colorado are facing challenges that politicians love to...
Cleve Moler, Who Unlocked the Power of Computing for Millions, Dies at 86
He built interfaces that allowed engineers, scientists and everyday people to solve difficult problems without having to write the underlying code.
Seyb v. Labrador in a Global Context: Health Exceptions to Abortion Bans under International Human Rights and Comparative Law
The O’Neill Institute believes that the law is a fundamental tool for solving critical health problems.
Sports Betting, Problem Gambling Tackled at MU Summer Institute in July
This is a story about a Millersville University Summer Institute that will tackle sports betting and problem gambling.
Structural problems underlie behavioral health services delays
A new report highlights the delays for New Yorkers in need of community-based services for behavioral health disorders. Our guest is Jihoon Kim.
Social Security is Facing a Political Crisis
On Tuesday the Social Security Trustees released their latest report on the system’s finances. The numbers didn’t change much: Unless something is done, the Old Age Survivors and Disability Insurance (OASDI) program, Social Security’s official name, will be unable to pay full benefits starting in either 2032 or 2034, depending on some technical issues. That’s not far away: If the Trustees are right, the prospect of a Social Security crisis will loom over the next presidential administration. It’s important to understand, however, the nature of the looming crisis. It won’t be an economic crisis. It won’t even be a serious fiscal crisis. Whatever you may have heard, Social Security isn’t in danger of going bankrupt. What we’re facing, instead, is potential political crisis. Congress and the White House could easily take action to sustain America’s retirement system. But given the current state of our politics, there’s no guarantee that they will. There is a widespread misunderstanding of how Social Security works. While Social Security was designed to look like a pension fund, it isn’t. A pension fund pays benefits out of a stock of assets it has accumulated over time. In contrast, Social Security operates as a government transfer program, like food stamps or Medicaid. Now, unlike food stamps — but like the highway trust fund — Social Security is on paper supported by a dedicated tax, the payroll tax, that is assigned to that program. But I say “on paper” because from an economic point of view assigning the payroll tax to Social Security is just an accounting convention. What matters for the U.S. economy is the overall balance between government spending and government revenue, not the difference between one type of spending and one source of revenue. So there’s no inherent economic significance to the fact that by 2034 payroll tax receipts will be insufficient to cover promised benefits. There is, however, a legislative issue. As long as the Social Security Administration can pay benefits out of payroll taxes and its cash reserve, there’s no need for Congress to vote each year to authorize benefits — they just keep going out until further notice. However, once those resources become insufficient, benefits will fall —by 17 percent according to the Trustees — unless Congress passes new legislation that “tops up” Social Security’s finances. Yet the current administration and Republican party are such extremists that there is a real risk that Social Security will be held hostage on behalf of their goals. If this should come to pass, the hostage-takers will claim that shoring up Social Security is unaffordable. Right on cue, Mike Johnson, the Trump-sycophant Speaker of the House, declared on Monday that “entitlement programs” like Social Security “have to be adjusted and fixed,” and that Republicans will introduce a plan to that effect next year. But this is a ploy, because while the cost of maintaining Social Security benefits at their promised level isn’t trivial, it is in fact affordable. According to the Trustees’ report, the actuarial balance of OASDI up through 2050 — the amount of additional funds it would need to keep paying full benefits for the next 25 years — is 1.06 percent of GDP. To put that number in perspective, the Trump administration proposes increasing military spending next year by $420 billion, equivalent to about 1.4 percent of GDP – without any discussion of whether that’s affordable Yet how did we get to the point where Social Security will need to be topped up? The main answer is that we have an aging population, with a growing ratio of retirees collecting benefits to workers paying into the system: Trump’s anti-immigration policies are making this problem worse. According to the Trustees’ report, lower immigration will deepen Social Security’s financial hole because many immigrants are working-age adults who will pay into the system for decades before they collect benefits. In fact, this problem may be much bigger than the report acknowledges: The report’s baseline assumption is that we’ll have net immigration of almost 1.2 million people a year, and even the pessimistic case assumes 750,000 a year. Meanwhile actual net immigration has already been cut far below that — and may now be negative. Moreover, Social Security is being financially damaged by growing income inequality in America. Payroll taxes are levied only on wages up to $184,500, and they don’t touch capital income. With the distribution of income increasingly shifting from labor to capital, as well as becoming more unequal among wage-earners, revenue from the Social Security payroll tax has been falling as a share of national income. From 1990 to 2024, it fell from 5.02 percent of gross domestic income to 4.46 percent. Which brings me to the question that, these days, we ask about everything: How might Social Security be affected by the advent of AI? A short answer: If, as many of us fear, AI accelerates rising income inequality, it will further reduce the payroll tax receipts that currently pay for Social Security and further endanger its finances. On the other hand, if AI, as its advocates promise, leads to faster economic growth, it will increase the potential tax base that could and should be used to support Social Security and other social insurance programs. But to take advantage of that larger base, we’ll have to get serious about taxing wealth and capital income. Is Social Security in trouble? Yes, but only because of the way its financing is currently structured — a structure that no longer works well because our society and economy have become so unequal. Moreover, Trump’s immigration policies are further endangering its already deteriorating financial condition. So don’t believe Republicans’ gaslighting that it will be necessary to cut Social Security benefits. All that is necessary to preserve Social Security is political will to raise taxes on the wealthy and a sensible immigration policy. MUSICAL CODA Actually 67 under current law.
As Game 4’s collapse showed, the Spurs have a De’Aaron Fox problem
Victor Wembanyama Points to Spurs’ Biggest Problem After Finals Collapse
Victor Wembanyama shares his honest thoughts after Spurs' game four collapse against the Knicks.
9 inmates sue San Francisco, alleging jail conditions led to serious health problems
According to the lawsuit, the women are experiencing unhealthy conditions compared to male inmates at the county jail. It also alleges a lack of exposure to "direct sunlight," leading to multiple health issues.
Pregnant women may reduce key health risk through less sitting, more light exercise
Women who engage in light physical activity and lessen their sedentary time may significantly reduce the risk of key health problems during pregnancy, according to a new University of Iowa-led study. ...
Politicians Have an Honesty Problem. Why Should We Accept That?
Outright falsehoods and shameless evasions now seem less like scandals than job requirements.
Richard Feynman’s 50-Year-Old 'Restaurant Problem' Finally Decoded. It Shows Why People Settle for Good Enough
The restaurant problem reveals why human shortcuts can work surprisingly well.
Tim Allen says 'personality problems' with onscreen sons has halted 'Home Improvement' revival
Tim Allen's plans for a 'Home Improvement' return has been made 'challenging' due to 'personality problems' with the actors who played his sons on the '90s sitcom.
Trump’s AI fund idea is good politics, but bad economics
Plans to share the gains from technology could cause more problems than they solve
The Biggest Problem Facing Small Businesses Right Now Just Hit a 53-Year High
Due to high supply costs and global energy concerns, small business owners aren't expressing optimism about the state of the economy.
Local business warns others to be wary of check fraud
Local residents and business owners are urged to be vigilant of check fraud, following one recent example which was preempted, thanks to the work of keen bankers. Attorney Caryn Brzykcy, of Harbinson Brzykcy Attorneys At Law in Taylorsville, explained that a $32,000 fraud was attempted against their firm’s checking account recently. “We had no problem…
Google Gemini is down — live updates on rapidly growing outage
Gemini users are reporting problems today
Could Bill Pulte be a FISA-shaped problem for the Trump Administration?
By tapping an underqualified ally for one of the most sensitive intelligence jobs on Earth, the president is risking a major legislative miss.
Arizona Cardinals' made big offseason mistake to cause current problems
The Arizona Cardinals' situation with Jacoby Brissett was their own fault for a premature QB decision in the spring.
Xbox Getting Creative About Next-Gen Consoles To Deal With Cost
Asha Sharma keeps hinting at a big problem