SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " looking " 2,381 found 🔀 AI-powered Shuffle
Here’s what comes next for MacArthur Center businesses, days before mall’s closure
Just days before closure, MacArthur Center tenants are moving out and looking for new locations.
The MAGA stars freaked out by their own movement
The right’s leading lights are looking for anyone to blame for the right’s growing extremism — except themselves.
Editorial | Brobbey The Poster Boy For Summer Transfer Targets
After enjoying the 25-26 season wrapping up, it’s time to start looking ahead!
Dolphins 90 in 90: Breaking down Seth Coleman’s roster position
Seth Coleman is looking to move from an undrafted free agent bouncing around the league last year into a rostered player this year as he heads into the Miami Dolphins’ 2026 training camp.
Japan takes massive leap in the World Cup Power Rankings
Japan crushed Tunisia in the 1,000th World Cup game ever played and are looking like a legitimate contender this summer.
Mamdani looks to flex political muscle in key New York House primaries
New York City Mayor Zohran Mamdani (D) is looking to use his political power to reshape New York’s congressional delegation less than six months after taking office. The popular mayor has mad…
Americans are paying thousands to flee states over politics — but experts say using specialized agencies is not worth it
Looking for help moving to another state for political reasons? There’s a real estate agency for that.
Forum: One person’s journey in sports business
I spend a lot of time speaking to young people looking to get into the sports business, as well as people looking for a new opportunity mid-career.
U.S. Small Business Administration ‘actively working’ to create veterans resource center in Idaho
At the request of U.S. Sen. Jim Risch, the federal Small Business Administration is looking at establishing a new, Idaho-based office dedicated to supporting veterans, military members and their spouses.
Cape Verde XI vs Uruguay – Predicted lineup and team news
Cape Verde arrive at Miami Stadium on Sunday looking to build on one of the most celebrated results in their nation’s sporting history.The Blue Sharks produced a disciplined, resolute defensive disp...
2026 MCWS finals: Will Oklahoma's win or UNC's loss carry more of an emotional impact in Game 2?
Instead of dwelling on a win or loss, both UNC and Oklahoma are looking forward to Game 2.
Panthers defender sets mind-blowing goals for 2026 season
Panthers CB Mike Jackson is looking to go where only one man, at least officially, has gone before.
Every new iOS 27 feature that's worth knowing about
While it's not flashy like Apple’s new Siri AI and Apple Intelligence upgrades, there are still a number of additions to iOS 27 worth looking at.
Leeds United facing tough battle for ex-Dortmund star's signature
The Peacocks could be looking towards the Bundesliga for their next move, but they might have a tough time getting a deal done.
U.S. Small Business Administration ‘actively working’ to create veterans resource center in Idaho
BOISE (Idaho Capital Sun) — At the request of U.S. Sen. Jim Risch, the federal Small Business Administration is looking at establishing a new, Idaho-based office dedicated to supporting veterans, military members and their spouses. Risch, an Idaho Republican, wrote to the head of the Small Business Administration, Kelly Loeffler, on June 9, asking to […]
Series Preview: Padres kick off interleague matchup with Rangers
The San Diego Padres enter a weekend series with the Texas Rangers looking to maintain control of a wild card spot in a crowded National League playoff picture.
Pittsburgh Pirates vs. Colorado Rockies: Bubba Chandler vs. Kyle Freeland
The Pirates are on the road looking to grab a win today.
Former Washington football star looking for new contract
Former Washington Huskies star Vita Vea is reportedly looking for a contract extension from the Tampa Bay Buccaneers.
What is the Pickaway County Fair entertainment?
The Pickaway County Fair may be known best for its livestock judging, but there is so much more! The entertainment aspects to the fair are worth looking into.
Carmen Electra reveals why she loves the Prince diss track that 'everyone knows is written about me'
Carmen Electra is looking back on her relationship with Prince, from their brief love affair, to the album they made together in 1993, to the diss track she swears 'everyone knows' was written about her.
Edenville General Store looks to expand entertainment offerings
Edenville General Store is looking to increase live music and other entertainment offerings with the addition of a new mobile outdoor stage. The approximately 2...
Former Patriots Quarterback Predicted To Be Traded To Panthers Midseason
The New England Patriots have found their franchise quarterback in Drake Maye, but his predecessor is still looking for another opportunity to shine.
Jaguars roster: Carter Bradley looks to secure roster spot
Carter Bradley enters training camp looking to secure Jacksonville's No. 3 quarterback role and earn a spot on the 53-man roster.
NCAA Athletics: Is this Middle School?
Grown adults with higher education degrees should know better…right? I’ve recently gotten out of coaching after 27 years. I won’t bother with my own story or reasons, but another good friend of mine is looking to get out and had this to say about it, “the kids aren’t the issue, it is the adults.” I […]
Mydays founder expresses interest in ProSiebenSat.1's adventure business
The founder of adventure experience business Mydays, now part of broadcaster ProSiebenSat.1, told Reuters he and co-investors are looking into buying back the unit, potentially pitting them against German entrepreneur Jochen Schweizer.
Nicole Kidman Linked to Mystery Entertainment Executive Months After Keith Urban Divorce
Nicole Kidman is back in the romance-rumor cycle months after finalizing her divorce from Keith Urban, and the latest claim has sent fans looking for ... Read More
Vampire Survivors studio Poncle is "reviewing" its Fortnite collaboration after the State of Unreal show and Epic's focus on generative AI
Poncle is seemingly reconsidering its Vampire Survivors Fortnite collaboration after seeing how Epic is using generative AI to help design assets.
Indonesia’s MD Entertainment Bets on IP and Microdramas for Global Push
As Indonesia’s entertainment industry gains greater international visibility, MD Entertainment, one of the country’s top studios, is increasingly looking beyond local success and toward global partner...
I had 2 job offers and chose the lower-paying option; how I decided
Rebecca Cavallo started looking for the next step in her career in 2021. She received two job offers and selected the lower-paying option for growth.
Why Extreme Sports Enthusiasts Keep Jumping After a String of Tragedies
Often considered thrill seekers looking for the next adrenaline hit, participants say they’re actually drawn to control and a sense of time slowing down.
Looking for answers
Phillies starting pitcher Andrew Painter is heading back to triple A.
The Herald's weekly entertainment picks
Looking to be entertained from Thursday, June 18, through Wednesday, June 24? Check out the Skagit Valley Herald’s weekly recommendations.
MCWS 2026: How UNC, Oklahoma are looking to remain undefeated in Omaha
In the end, the numbers were on North Carolina's and Oklahoma's side as they advanced to the MCWS championship.
Could OC Supervisors Lose Control of County’s Health Plan for the Poor?
Assemblyman Avelino Valencia’s state bill is looking to strip supervisors off the CalOptima board after years of concerns that they politicized healthcare.
Retirements, economic pressures, staffing challenges driving exodus of businesses
Rochester business owners are increasingly looking to sell, broker Stuart Levy says, citing shrinking margins, higher costs and staffing woes. BizBuySell lists 84 active Q1 listings, led by service firms.
Yankees Eyeing Tarik Skubal Trade as Deadline Approaches
The New York Yankees will be looking to make a decision after a new Tarik Skubal trade report.
Raccoon in Anne Arundel County tests positive for rabies; health officials seek anyone exposed
The Anne Arundel County Department of Health is looking for anyone who may have come in contact with a raccoon on or near McGill Court and Milburn Circle in Pasadena after the animal tested positive for rabies.
Starmer warns against ‘looking backwards’ to Brexit after rivals back UK’s return to EU
Speaking at the G7 summit, prime minister says he stands by Labour’s manifesto pledge not to rejoin bloc
7 events in Lancaster County this weekend, from used book sales to a jazz festival
Looking for a low-spend weekend in Lancaster County?
Ole Miss infielder Brayden Randle enters NCAA transfer portal
Ole Miss infielder Brayden Randle has entered the NCAA transfer portal, On3’s Pete Nakos has learned. Randle spent three seasons in Oxford, stepping into a big-time role during the 2026 season. But Randle will be looking to spend his final year of eligibility elsewhere. Certainly a name to watch moving forward. Randle appeared in 51 […]
Metro Atlanta Chamber host Spanish officials for international business summit
While Spain’s national team finished with a zero-to-zero draw in its first match of the World Cup, economic leaders are looking to score off the pitch.
The 20 most peaceful countries in the world, ranked
Amid military tensions overseas, international peace has gained new importance for those looking to travel or move abroad.
Spotting Winners: PENN Entertainment (NASDAQ:PENN) And Consumer Discretionary - Casino Operator Stocks In Q1
Looking back on consumer discretionary - casino operator stocks’ Q1 earnings, we examine this quarter’s best and worst performers, including PENN Entertainment (NASDAQ:PENN) and its peers.
Chautauqua County Announces Funding Opportunity for Youth Sports Programs
MAYVILLE, N.Y. — The Chautauqua County Youth Bureau is looking to expand opportunities for young people to experience the many benefits of youth sports, including teamwork, leadership, physical activity and personal growth.
Business owners may be overlooking a key part of their financial picture
Business credit can be easy to overlook because it usually does not create urgency until a company needs something.
These forward-looking, early-stage businesses are already standing out
The World Changing Ideas On the Rise honorees are tackling issues like accessibility, climate change, and more.
U.S. scientists are being lured abroad—and they aren't looking back
The great American brain drain could define science for a generation
Celebrate Juneteenth at these Brevard events
Looking to celebrate Juneteenth in Brevard? Here are the local events happening in Cocoa and Melbourne this week.
For sports fans looking for a piece of peace, June is busting out all over
Something special is going on throughout North America. We’re stepping outside to join others to partly root, root, root for the home team.
Looking for love in all the wrong places? Learn science-backed strategies to make better connections
Relationship experts Sonja Lyubomirsky and Harry Reis offer evidence-based strategies for forging meaningful, loving ties in their book, “How To Feel Loved.”
Stefon Diggs makes his case for joining Commanders in 2026
Stefon Diggs wants to play. And it sure sounds like he's looking for a homecoming with the Commanders.
G7 leaders — and the rest of the world — wait for clarity on US-Iran agreement
Heading into an al fresco dinner Monday evening overlooking the azure Lake Geneva shoreline, the leaders of the world’s most powerful nations were hoping to gain clarity on what, exactly, President Donald Trump’s new arrangement with Iran entailed.
Health Insurer Centene, Looking To Cut Costs, Offers Companywide Buyouts
Obamacare insurer Centene offering employees buyouts to cut costs after Trump and GOP Congress didn't renew subsidies
Nominate your favorite Services business in San Antonio
Nominations for this year’s SA Picks are open, and we’re looking for the best Services Businesses in the San Antonio area!
5 most intriguing non-division games on the Cowboys schedule
What non-division game are you looking forward to the most?
Laguna Beach Looking at Business and Hotel Tax Increases
City officials are looking at avenues for increased taxes in Laguna Beach, specifically geared toward day trippers’ pockets.
Reflecting On Business Services & Supplies Stocks’ Q1 Earnings: Interface (NASDAQ:TILE)
As the craze of earnings season draws to a close, here’s a look back at some of the most exciting (and some less so) results from Q1. Today, we are looking at business services & supplies stocks, starting with Interface (NASDAQ:TILE).
A satellite just learned to find things on its own — here's what that means
In April, for the first time ever, an Earth observation satellite found what it was looking for, all on its own.
Buehler, newcomers propel Padres over Orioles for series win
BALTIMORE -- What seemed like a downward spiral just over a week ago now appears to be a "next man up" culture shift that has San Diego looking up — at least for now.
Is SMIC N+3’s Metal Pitch Smaller than Intel 18A’s?
Almost four years ago, we published that SMIC had started shipping 7 nm (N+1) chips. Now, SMIC is shipping its third-generation 7 nm (N+3) process in Huawei’s Kirin 9030, with a minimum metal pitch of 32.5 nm, about 10% tighter than the 36 nm minimum metal pitch shipping in Intel’s latest Panther Lake CPUs on 18A. The headline is true, but incomplete cherry picked metric. N+3 reaches the density of TSMC N6 through aggressive DUV multi-patterning and design-technology co-optimization (DTCO), but it pays for that in complexity, efficiency and process control. We found this and more in our reverse engineering and teardown where we cover SMIC’s N3 process technology, Huawei’s packaging, memory, architecture, and more. SemiAnalysis has been building a state-of-the-art teardown lab in Oregon capable of analyzing the world’s most advanced and important chips over the last year and half. We have already generated revenue on advanced datacenter chip teardowns including our recent reverse engineering of a major TSMC customer’s COUPE CPO optical engine + EIC 3D stack. This is the first public report from the SemiAnalysis Teardown Engineering & Evaluation Lab, or STEEL for short. The lab is aggressively scaling up and out and we’re excited to announce it publicly. This is a bit of inconvenient timing for TechInsights as they are private equity owned and currently being sold while having enjoyed virtually no credible competition for decades. This has led to TechInsights underinvesting in CAPEX. SemiAnalysis exceeds TechInsights in revenue despite no venture or private equity ownership and being founded only 6 years ago. Because we have no external investors and are founder led, we move faster, build faster, and we can release client chip teardowns for free regularly, while focusing on datacenter for our major clients. Here’s the first public image from our lab, the HiSilicon Kirin 9030 Pro SoC: This report will detail our teardown of the Kirin 9030 and our findings on SMIC’s N+3 process, the most advanced in China. For comparison, we’ll show our teardown of the MediaTek Helio G99, made on TSMC N6. Through this comparison, we can look at the effect of export controls – SMIC N+3 and TSMC N6 are comparable nodes, but one is heavily export-controlled, the other free to use the West’s most advanced equipment. Here we see both China’s progress and constraints. SMIC N+3 reaches TSMC N6-class logic density, but it requires far more aggressive DUV multi-patterning, so it does not match N6 on process maturity or cost. The Kirin 9030 Pro performs similarly to three-year-old Android flagships, and trails far behind the current flagship SoCs from Apple, Qualcomm, MediaTek, and Samsung. The efficiency gap is even wider. Export controls have not stopped Huawei and SMIC from shipping advanced silicon, but they have forced a different path. Without EUV, SMIC is leaning harder on DUV multi-patterning, DTCO, and increasingly complex integration. The roadmap continues forward through tighter design rules and backside power, but each step adds cost and process risk. Huawei’s τ scaling and LogicFolding show another path: stacking active logic and recovering density through advanced packaging and system-technology co-optimization (STCO). To understand the Kirin 9030, we must first understand Huawei’s SoC history. HiSilicon is Huawei’s chip design arm, responsible for the Kirin smartphone SoCs, Kunpeng server CPUs, Ascend AI accelerators, and switch/router networking silicon. Before export controls, Huawei was TSMC’s largest customer – the only customer on TSMC’s first EUV node, N7+, and among the first on N5, alongside Apple. That ended in late 2020. Huawei switched to Qualcomm SoCs in its flagship smartphones, though export controls limited them to 4G-only variants. In late 2023, Huawei returned to in-house silicon with the Kirin 9000s, a successor to the Kirin 9000, fabricated on SMIC N+2 instead of TSMC N5. In the following years, they released the Kirin 9010 and 9020 on the same N+2 process. These chips used Huawei’s in-house TaiShan CPU cores and Maleoon GPU. We have not torn down a Kirin 9020 ourselves, so the predecessor die shot is from Kurnal. The die shots show how Huawei spent its silicon budget: which functional blocks are where, and how their areas compare to the predecessor. First, a quick guide to the major blocks on the die. The total die area is nearly identical, but the 9030 uses that area more aggressively. A denser process lets Huawei fit an extra middle CPU core, more GPU and NPU cores, and larger caches into the same footprint. In contrast, the Helio G99 is a much smaller, low-cost SoC, built for budget smartphones rather than a flagship device. While the Kirin 9030 is ~140 mm², the G99 is only ~29 mm², roughly one-fifth the area. The underlying TSMC process technology, however, is directly comparable as a baseline for analyzing SMIC’s. The Kirin 9030 is an evolutionary refresh, not a clean-sheet design. Its CPU, GPU and NPU cores carry over the 9020’s families, and the gains come from three levers: the SMIC N+2-to-N+3 process step, DTCO and floorplan work, and incremental microarchitecture. Area is where the first two show up, and the 9030 scales well here. Performance and efficiency are the harder test. Huawei’s design holds up better than its node would suggest, but the chip still trails, both because N+3 sits behind the leading-edge nodes and because its cores, while competent, remain a few generations behind the newest designs. The new prime core is an incremental update. The main changes are a 10% frequency increase from 2.5 GHz to 2.75 GHz and a doubling in the L2 cache from 1 MiB to 2 MiB. Despite the increased cache, the core size decreased by 7.6%. Excluding the private L2 cache, the core size decreased by 21%. This is a large reduction for an incremental node. Compared with the TaiShan New V120 core in the Kirin 9020, the Kirin 9030’s middle core is almost unchanged architecturally, yet each core shrinks by ~22%. Most of that comes from the move from N+2 to N+3, with layout likely accounting for the rest. Visually, the most noticeable change is the increase from 3 middle cores to 4. There is also a 20% increase in the shared L3 cache of the big cluster. This helps to improve multi-core performance without sacrificing much in terms of area. Even with each core shrinking, the big CPU cluster’s total area is essentially unchanged. The per-core savings went back into an additional middle core and larger caches. The tiny cores shrank less than the prime core (excluding its L2 cache) and less than the middle cores. This is likely because fixed overhead is a larger share on a small core. We cannot resolve any architectural changes from the die shot alone, but the per-clock and efficiency gains shown below point to more than pure process and layout scaling. The area reduction was offset by a doubling of the shared L2 cache from 2 MiB to 4 MiB, leaving the total tiny CPU cluster area slightly larger. Area is the easiest improvement to see from a die shot, but it is only one part of PPA (power, performance, area). For modern logic, power and performance matter just as much, and often more. Since Dennard scaling broke down in the mid-2000s, voltage and frequency have not scaled in step with transistor dimensions, so each node has had to fight harder for gains in performance and efficiency. The starkest comparison is not Kirin 9020 versus Kirin 9030 Pro. Apple’s efficiency cores run circles around Huawei’s prime core. Apple’s low-power core delivers 20% higher integer performance while drawing only 1 W, compared with 4.5 W for Huawei’s prime core. N+3 matches TSMC N6, but N6 is several generations old. Apple and Qualcomm build on N4 and N3P, which are denser and sit on a better voltage-frequency curve, giving them a larger transistor budget and more performance per watt. The 9030’s own cores did improve. The middle and tiny cores gained 17% and 14% in per-clock integer performance over the 9020, with floating-point flat on the middle core and up 11% on the tiny. The tiny core improves cleanly, with performance rising while power falls and efficiency increases by 45% in integer and 24% in floating point. The middle core is mixed: integer performance rises but power rises faster, cutting integer efficiency by 7%, while lower power lifts floating-point efficiency 16%. Per-clock gains at the same or lower frequency are microarchitectural, so the cores are tuned, not just shrunk. Both also failed to hold their rated maximum frequencies, pointing to thermal, power, or stability limits. Per clock, the middle core sits around Arm Cortex-A720 and the tiny core near the Cortex-A520; absolute performance trails because Huawei clocks them much lower. The prime core is roughly Cortex-X2 class per clock, a 2021 design. Apple’s 2020 M1 Firestorm core is still 35% higher per clock and 57% faster in absolute integer performance at a similar 4.5 W. The current leading edge is further ahead again: the Apple M5 P-core is 60% higher per clock and 2.7× faster, the Arm C1 Ultra 45% higher and 2× faster. Matching older high-end cores per clock is a genuine design achievement. What Huawei cannot match is the voltage-frequency curve and transistor budget of leading-edge nodes, which let Apple, Qualcomm and others spend more transistors in the same area on wider cores, larger caches and deeper buffers while running at lower voltage. Huawei’s LogicFolding roadmap is one answer, stacking active logic to recover density and shorten signal paths. We return to it later. The GPU compute units (CUs) changed more visibly than the CPU cores, moving to a more rectangular layout for both the arithmetic logic unit (ALU) clusters and the CU overall. Even with ray-tracing support added, a CU shrank ~28%. However, that shrink is offset by the increase from 4 to 6 CUs and the area outside the CUs grew 33%. Overall, the GPU cluster is larger by ~10%. The GPU is where Huawei makes its biggest gains. The Maleoon 935 is not competitive with current flagships, but it is a large step up from the 920 and reaches older-flagship territory. In 3DMark it is 70% faster in Wild Life Extreme (WLE) and 79% faster in Steel Nomad Light (SNL) than the 920; with 11% higher clocks and 50% more CUs, the ~67% theoretical uplift roughly matches WLE and is beaten by SNL. It edges ahead of the Snapdragon 8+ Gen 1 in WLE and SNL, and the Dimensity 9200 and Apple A16 in WLE, but stays far behind newer parts: the Snapdragon 8 Elite Gen 5 and Dimensity 9500 are ~2.4–2.6× faster in WLE and ~3.2× faster in SNL. The Maleoon 935 is Huawei’s first GPU with hardware-accelerated ray tracing; there it lands slightly ahead of the Exynos 2200, and on par with the Apple A16, with current flagships up to 3.7× faster. The Neural Processing Unit (NPU) saw the largest structural changes of any block, moving from a Lite and a Tiny core in the Kirin 9020 to a Lite and two Tiny cores in the Kirin 9030. Both core types also show significant layout changes. This is a reversal in Huawei’s NPU design. The Kirin 9000 5G, its last flagship chip on TSMC N5, used two Lite and one Tiny core. The series of SoCs on SMIC N+2 moved to one Lite and one Tiny core, likely for area savings. With the Kirin 9030, Huawei has shifted back toward a larger multi-core NPU cluster, but with the additional area going to a Tiny core rather than a Lite core. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Before diving into the process stack, the package and memory are worth separating from the SoC itself. The Pro variant of the Kirin 9030 carries 12 GB of Samsung DRAM, with two stacks of four dies each. The dies were identified as the K4L2E165YD, a 12 Gb LPDDR5X-9600 device fabricated on Samsung’s 1a node, the fourth generation of its 10 nm-class DRAM after 1x, 1y and 1z. 1a has shipped in volume since 2022, so this is current memory rather than older-node inventory. The 16 GB Pro Max variants we obtained were found with both CXMT and Samsung packages. The CXMT package is marked CXDD7JEDM, with two stacks of four dies, packaged in week 45 of 2025. The inferred die dimensions from X-ray computed tomography (CT) are consistent with a known density of ~0.3 Gib/mm² for the CXMT G4 process, roughly equivalent to other manufacturers’ 1z processes. The Kirin 9030 uses a typical integrated package-on-package (iPoP) stack: multiple DRAM dies in a memory package sit above an organic redistribution layer (RDL) interposer, which sits above the SoC and package substrate. The full package is then mounted to the printed circuit board (PCB) through ball-grid array (BGA) solder bumps. The memory package substrate is a thin bismaleimide-triazine (BT) laminate carrying the LPDDR5X stack. The organic RDL interposer over the SoC routes the PoP signals around the die and carries possible dummy thermal copper pillars. The package substrate, a thicker Ajinomoto Build-up Film (ABF) build-up over a BT core, fans the flip-chip bumps out to BGA pitch and embeds the power planes. The whole stack is organic. The only silicon is the SoC and the LPDDR5X dies; there is no silicon interposer. Keeping it all-organic brings the package’s coefficient of thermal expansion (CTE) close to the PCB’s, reducing board-level warpage, and avoids the cost of a silicon interposer the SoC’s bandwidth does not need. In an iPoP stack, the memory package connects to the organic RDL interposer through an array of solder bumps. Underfill fills the gap around those bumps, adding stiffness and protecting the joints from mechanical stress. The Pro and Pro Max variants differ here, which we cover behind the paywall. The die shot and architecture tell us how Huawei allocated its silicon budget. The process tells us what SMIC can manufacture. We use the Helio G99 as the process reference for TSMC N6. Both SMIC N+3 and TSMC N6 are evolutions of previous 7 nm-class nodes. We used targeted TEM cross-sections through logic and memory regions, imaged in both fin-cut and gate-cut directions. Each cross-section caption gives its horizontal field width (HFW), the real width of the imaged area. We start at the transistor fins, then move up through standard cells, local interconnect, and SRAM. SMIC has not overtaken Intel or TSMC. It uses aggressive DUV scaling and DTCO to reach N6-class density, but that density doesn’t translate into comparable performance and efficiency, for two reasons: the node gap to leading-edge nodes, and Huawei’s core designs. Fin Profile One of the most important knobs in a FinFET process is the fin profile: the shape of an individual fin and the channel where current passes from source to drain. The ideal fin is tall, narrow, and nearly vertical. A taller fin increases effective channel width, while a narrower fin improves electrostatic control by thinning the body the gate must control. Push either too far, and the process pays for it: weaker drive current, fragile fins, taper, footing and line-edge variation that hit yield and device variability. The Intel 22 nm, 14 nm, and 10 nm fin cross-sections show how FinFET nodes have improved over time. 22 nm fins were a first-generation structure, relatively short, wide and strongly tapered. The shape limits current density and reduces gate control uniformity across the height of the fin. At 14 nm and 10 nm, Intel pushed the fins taller and narrower while also making the sidewalls more vertical. Rather than shrinking the device, these changes increase the effective channel width per fin and improve electrostatic control. The trade-off is that taller fins at tighter pitches are much more difficult to manufacture. Now, let’s compare the Helio G99 on TSMC N6 with the Kirin 9030 on SMIC N+3. Both processes are in the same class, with fin pitch of 30-32 nm on N+3 and 34 nm in our N6 cross-section. The pitch for N6 is especially interesting as N7’s HD library is generally listed with a 33 nm fin pitch, and N6 did not shrink pitches directly. Its density gains came from DTCO instead of tighter pitches. The 34 nm pitch was stable across our sampled region and serves more as a comparison against the SMIC N+3 we have not investigated further. Pinning down N+3’s fin patterning scheme takes more than one core unit. The CPU cores show a dense ~32 nm pitch, with the pitch between N-P fin pairs alternating between 78 and 88 nm. Logic alone may be consistent with dual-pitch mandrels of 120 and 110 nm, but this is a complex and unusual approach. Combining the pitch from the the 8T SRAM, which has more complex repeat unit, with the CPU core sequence allows us to reverse engineer the patterning steps with more confidence. As both the logic and SRAM should share the same base grid, a single CD mandrel lithography pattern with 128 nm pitch undergoing SAQP produces a die-wide ~32 nm grid (128 nm/4), which supports the pitch sequencing seen in both logic and SRAM cells. In the sampled cross-sections, N+3 shows a taller, narrower, higher-aspect-ratio fin than N6. The measured fin aspect ratio is ~9.5:1 on N+3 versus 7.8:1 on N6. N+3 also shows less top rounding, with an estimated radius of ~2 nm, compared with 2.8 nm on N6. Even though the fin widths differ, the ratio of top rounding to fin width tells the same story, with N+3 at 0.37 and N6 at 0.44. In a geometric sense, lower is better; a perfectly rectangular fin would have no top-rounding penalty. These are single-digit-nanometer features measured from a handful of cuts, so treat the absolute numbers as approximate. The important result is the relative gap: N+3’s fins are consistently taller, narrower and less rounded than N6’s. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Standard Cell A standard cell is the basic building block of chip layout: a fixed-height row pairing one NMOS and one PMOS transistor that share a gate, tiled in a grid to build logic blocks. The key dimensions are contacted gate pitch (CGP), cell height (CH), fin count, and the lower-metal routing grid. To measure density, we use the Bohr metric: a weighted average of NAND2 gate area (60%) and scan flip-flop area (40%). This represents a realistic mix of combinational and sequential logic. This metric has its limitations, especially for complex cell layouts like TSMC’s FinFLEX, which alternates cells with different fin counts. Even so, it is the best metric for a pure process-level comparison. Another important measurement is the fin pitch; it refers to the distance between two fins of the same transistor. In a FinFET process, multiple fins are used in each transistor to increase the drive current and thus performance. TSMC N6 ships both a high-density (HD) library with 2 PMOS and 2 NMOS fins per cell, and a high-performance (HP) library with 3 of each. More fins under the shared gate mean more effective channel width. HP cells switch harder at the cost of area. Designers mix the two on a die, primarily spending HP cells on timing-critical paths, and matching their PPA targets. In the Cortex-A55 core of the Helio G99, we found a cell height of 240 nm for the HD cell. MediaTek has used HD cells in the G99 to minimize die size and thus cost. As an SoC for budget smartphones at ~$100, this is essential. By contrast, we found only one library in the Kirin 9030, with 2 NMOS and 2 PMOS fins. This suggests a narrower library strategy than TSMC N6, where both HD and HP libraries are widely used. This likely reflects the smaller customer base and the more constrained domestic design and electronic design automation (EDA) ecosystem. In all three CPU cores of the Kirin 9030, we found cell heights of 228 nm, 5% smaller than on N6. This is also a reduction of 9.5% over SMIC N+2’s cell height of 252 nm. SMIC N+3 and TSMC N6’s HD library both feature a CGP of 57 nm. For SMIC, this is a 9.5% shrink over N+2. In the past, CGP and cell height alone may have been enough to compare transistor density. Now, however, we must consider scaling boosters and DTCO as well. SMIC’s density gain does not come from EUV. It comes from using every available DTCO booster aggressively. First is fin depopulation: reducing the number of NMOS and PMOS fins in each cell. The first FinFET nodes started with 3 or 4 fins for each transistor. SMIC N+3 and TSMC N6 HD both use only 2 fins per transistor, trading drive strength for density. Next is contact over active gate (COAG). By landing the gate contact directly over the active gate, instead of out over the isolation region, the cell height drops. N+3 integrates COAG while N6 does not. Our N+3 gate-cut cross-sections indicate COAG, with the gate contact sitting over the active region, while N6 shows an off-gate contact. Last is single diffusion break (SDB). Diffusion breaks are inserted between cells in the same row to provide electrical isolation, but they also introduce local layout effects (LLE), layout-dependent shifts in electrical characteristics. In the past, a double diffusion break was used, consuming the space of two CGPs. SMIC N+3 and TSMC N6 instead use SDB, saving area but increasing LLE sensitivity. This must be controlled at the process level and accurately modeled in the process design kit (PDK) so that EDA tools can account for it. Overall, SMIC N+3 has a transistor density of 113.4 MTr/mm², slightly above TSMC N6 at 107.7 MTr/mm². Even without EUV, SMIC has achieved density beyond TSMC’s mature N6 node which utilizes EUV. Metal Stack The smallest critical dimension in the teardown is M0; SMIC N+3 uses a 32.5 nm local metal pitch. That is smaller than the 36 nm M0 pitch on Intel 18A in Panther Lake. However, this does not mean that SMIC has a better process than Intel 18A or TSMC N3P. M0 is a local intra-cell routing layer. Its usefulness depends on the full interconnect stack: M1 and M2 pitch, track count, via and line resistance, design rules, mask count, overlay control, and routing flexibility. The 32.5 nm M0 is consistent with self-aligned quadruple patterning (SAQP), whose four-population line-width loading we read coarsely as alternating widths of 21.5 to 24 nm; M1 and M2, at 38 and 40 nm, are consistent with self-aligned double patterning (SADP), a single A/B split. On TSMC N6, M0, M2, and M3 sit at a relaxed ~40 nm and are consistent with SADP-class double patterning, with no need for quadruple patterning. That said, we measure M2 for example at ~43 nm, likely inflated by sparse routing. We do not assign any specific layer to EUV from our cross-sections; the distinction we can draw is double versus quadruple patterning, not lithography wavelength. Transistor-level density in the front-end-of-line (FEOL) sets an upper bound, but the design is ultimately limited by what the interconnect stack can route. The lowest metals are the most important for standard-cell density, but the semi-global and global layers determine how usable that density is at the block and chip level. Two axes are commonly used for chip cross-sections: the fin-cut and the gate-cut. The micrograph above is a fin-cut and shows metals 0 through 3. This axis lets us see the even-numbered metals, with M0 right above the fins. There are two kinds of M0 lines. The first are the power rails; these are wide wires for the VDD and VSS running horizontally at the top and bottom edges of each standard cell. The wide wires measure 55 nm across, more than double the other M0 lines. Their width minimizes resistance and reduces IR drop. The second kind are intra-cell wires, short segments within the cell that connect terminals to M1. These have alternating widths between 21.5 and 24 nm. The M0 pitch is 32.5 nm, a 19% reduction versus N+2 and N6. At this pitch, DUV patterning requires more aggressive multi-patterning, increasing mask count, overlay sensitivity, process complexity and cost. M0 is below what a single DUV-defined spacer (SADP) can resolve, so SMIC cascades a second spacer step (SAQP). The cross-section reflects the cost: the M0 trenches are visibly more re-entrant (narrower at the bottom than the top) than M1 or M2 on the same chip and carry a bright barrier-rich foot where the trench meets the etch-stop layer. That shape is partly the intended damascene profile, as a slightly narrow bottom helps void-free copper fill, but its magnitude at M0 is driven by the tight pitch and the higher trench aspect ratio. Intel 18A supports an M0 pitch of 32 nm, although Panther Lake has only shipped with a looser 36 nm pitch. This is due to Intel’s heavy usage of HP libraries. Among leading-edge nodes, 18A has the loosest M0 pitches due to PowerVia. With power routing moving to the backside, congestion is reduced, and the entire front-side metal stack can be used for signal routing. M2 is the first true inter-cell routing layer. It runs horizontally like M0 but spans across multiple cells to carry block-level signals. The M2 pitch sets the cell’s track height – the number of M2 tracks that fit between the VDD and VSS rails, defining what the library calls a 6-track or 7.5-track cell. This layer is the most important, limiting the routing of entire blocks. SMIC N+3 features a 5.7-track cell. The M2 pitch is 40 nm, a 5% decrease over N+2 and the same as N6. This shrink keeps the pitch at the edge of what is possible with double patterning. Future nodes will need to increase the number of masks for M2 as reducing the number of tracks is much harder due to the limitations in routing. The micrograph above is in the perpendicular direction, the gate-cut, and shows metals 0 through 4. This allows us to see and measure the odd-numbered vertical metal layers. The M1 pitch is 38 nm, 9.5% less than N+2 and 33% less than N6. The M1-to-gate ratio matters because it sets local routing flexibility. N+2 and N+3 use a 3:2 ratio, while N6 uses a 1:1 ratio, explaining the huge differences in M1 pitch. The more M1 lines there are compared with the gates, the more flexibility there is for power and signal crossing within the cell. Routing flexibility enables more complex and better cells. Clean fractional ratios are also preferred as a grid is periodic and improves layouts. The 3:2 ratio gives SMIC more local routing flexibility than a strict 1:1 grid, but it also complicates layout and patterning. This is a DTCO choice, with SMIC increasing process complexity to recover density and routability without EUV. This 3:2 ratio is not very popular in the leading-edge nodes. TSMC has only used it on N7+, the N5 family, and the short-lived N3(B). They have switched back to a 1:1 ratio for N3E. Intel has only used it on the 10 nm/Intel 7 family, with Intel 4, 3 and 18A all using a 1:1 ratio. Samsung is the only one still using a 3:2 ratio at the leading edge, using it in the SF4 and SF3 families. It remains to be seen if SMIC will remain at a 3:2 ratio or move to a 1:1 ratio with its future nodes. The industry is still actively exploring these local-routing ratios. At VLSI 2026, imec will be presenting work on even higher ratios, including a 2:1 scheme that can reduce area by up to 14%. We will be covering the conference in a future newsletter article. Subscribe We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. The final local interconnect layer for N+3 is M3, with a pitch of 44 nm. The M3 pitch is the same as on N+2 and 10% larger than on N6. The semi-global layers carry the majority of block-level signal routing. They have a coarser pitch than the lower local layers. On leading-edge nodes, they are designed to sit at the limit of DUV single patterning. M4 through M11 pitches were found divided between 80–82 nm (M4–M6), 128 nm (M7–M10), and 148 nm (M11). Given limited sampling, it is possible these are divided further in dense routing areas. At the top are two giant metal layers, M12 and M13. These have kept the same pitches as N+2 at 1920 nm and 4600 nm respectively. While the lower layers’ pitches are generally fixed by the process and library, the upper layers vary much more in pitch and count, depending on the design. Even two smartphone SoCs on the same process can have wildly different metal stacks. The Helio G99 carries fewer routing layers, reaching coarse metal pitches of 850 nm by M9, while the larger and higher-performance Kirin 9030 keeps fine pitches until M11. SRAM At the leading edge, SRAM is much more difficult to scale than logic. TSMC’s latest nodes have seen little to no bitcell scaling, while logic still has more DTCO levers to pull. While looking for other logic libraries in the GPU compute units, we stumbled upon the SRAM. The most common type of SRAM has 6 transistors (6T), but this cell had 8 transistors (8T) instead. 8T SRAM adds two transistors to form a dedicated read port. Unlike a 6T cell, where reading disturbs the storage, the decoupled read port removes read-disturb, improving read stability and letting the cell be pushed harder for performance. At first glance, the cut looked like an unusual logic library, with each cell row having 3 fins of one polarity and 5 fins of another. The rows also alternated in orientation. Energy-dispersive X-ray spectroscopy (EDS) resolved our confusion. The cut had not landed on the GPU logic, but on the SRAM macro beside it. The unusual fin pattern was due to the SRAM library. We return to EDS in the process flow analysis behind the paywall. SRAM libraries are not like traditional logic libraries. Due to the unequal number of PMOS and NMOS transistors, they require specialized rules and layout libraries. They do not need the flexibility of logic libraries, so they are hyper-optimized for one purpose: dense, reliable memory. The SRAM cell we found is a 1:2:2-2:2 cell. This means there is 1 fin per pull-up (PU) PMOS transistor, and 2 fins per pull-down (PD) and pass-gate (PG) NMOS transistor. These 2 PU, 2 PD and 2 PG transistors would usually form a single 6T high-current cell (HCC). An 8T HCC adds a read-pull-down (RPD) and a read-pass-gate (RPG) NMOS transistor, each with two fins. We measured a cell height of 406 nm, which brings the bitcell size to 0.0463 µm². That is a theoretical peak density of 21.6 Mib/mm². We estimate that a 6T HCC would have a cell height of 292 nm and a size of 0.0337 µm². This is ~12% larger than a 6T HCC on Intel 3 and 4. We also estimate the 6T high-density cell (HDC) to have a cell height of 228 nm and a size of 0.0260 µm². This is coincidentally the same as the logic standard-cell height measured earlier. The estimate puts the cell near Samsung 7LPP/5LPP and slightly below TSMC N7/N6. That is a theoretical peak density of 38.5 Mib/mm². 6T HDC is arguably the most important cell as it is used for the largest caches in a chip, the L3 caches and system-level cache (SLC). Both the Kirin 9020 and 9030 have split the SLC into 4 banks to raise total SLC bandwidth. In the Kirin 9030, the SLC increased from 2 MiB to 3 MiB per bank. Correspondingly, the number of arrays within the bank also increased by 50%, from 16 to 24. Each array can store 128 KiB and forms an orderly pattern on the die shot. From the Kirin 9020 to the Kirin 9030, the area of a 128 KiB SLC array decreased from 0.0477 mm² to 0.0392 mm², an 18% shrink. The achieved density is 25.5 Mib/mm², 66% of the theoretical maximum. While the SLC was quite similar across both chips, the L3 has seen some major changes, particularly in terms of its layout. The total capacity also went up from 10 MiB to 12 MiB. Much like the SLC, the L3 is also split into 4 banks. In the Kirin 9020, an L3 bank consisted of 16× 128 KiB arrays and 16× 32 KiB arrays. However, an L3 bank in the Kirin 9030 instead consists of 48× 64 KiB arrays. In the Kirin 9020 L3, a 128 KiB array was 0.0513 mm² and a 32 KiB array was 0.0154 mm². The size of the 128 KiB array is different on the L3 and SLC as the assist circuitry for the two arrays differs depending on their purpose. In the Kirin 9030 L3, a 64 KiB array is 0.0210 mm². Although not a like-for-like comparison, normalized for capacity, it is 18% smaller than the 9020’s 128 KiB L3 array and 31% smaller than its 32 KiB L3 array. The achieved density is slightly lower than the SLC, at 23.8 Mib/mm², 62% of the theoretical maximum. Unlike the L3 and SLC, the prime cores’ private L2 cache uses a 2-bank design. As the prime cores’ L2 is latency-critical, it likely uses 6T HCC instead of 6T HDC. The 9020 has 16 arrays in each bank while the 9030 has 32. Each array has a capacity of 32 KiB. A 32 KiB array in the L2 shrank from 0.0171 mm² to 0.0142 mm², ~17% smaller. The density is 17.6 Mib/mm², ~59% of the theoretical maximum for 6T HCC. SRAM scaled well from N+2 to N+3, shrinking by ~19%, close to the theoretical logic shrink. The caveat is that N+2’s bitcells were unusually large, bigger than comparable 7 nm-class nodes, so part of the gain is catch-up rather than true scaling. With the insights from STEEL’s teardowns, we will be doing a deep dive into SRAM in a future newsletter article. Subscribe Everything above came out of a single STEEL teardown: die annotation, block-level area analysis and TEM cross-sections through logic and SRAM. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Future Roadmap The same cross-sections that pin down N+3 also show where SMIC can go next. Although N+3 is already close to the practical limits of DUV multi-patterning in several layers, SMIC still has a few scaling levers left. A theoretical N+4 would likely start with cell height. N+3 uses 5 M0 tracks between its power rails. Moving to 4 M0 tracks, as on SMIC N+2 and TSMC N6, could reduce cell height by roughly 15%. The routing grid is only one side of the shrink; the front end also must fit into the smaller cell. One possible FEOL lever is reducing the p-to-n isolation spacing from two diffusion grid units to one. Intel used this scaling booster on Intel 4, and TSMC did so on its N3 family. This path trades layout flexibility for density. Fewer M0 tracks reduce local routing resources, while tighter p-to-n spacing raises integration and design-rule difficulty. M2 is also constrained by the cell height shrink. For SMIC to maintain a ~5.7-track cell, M2 would need to move toward ~35 nm. That would move another layer into SAQP territory. SMIC could also reduce the CGP from 57 nm to 54 nm. Intel reached a similar CGP on Intel 10 nm/Intel 7 without EUV. The local interconnect is also tougher. If SMIC keeps the 3:2 M1-to-gate ratio, M1 would need to shrink to 36 nm and would likely require SAQP as well. If SMIC moves to a 1:1 ratio, M1 could relax to 54 nm, but it would give up routing flexibility. Under this theoretical path, we estimate that SMIC N+4 could reach a cell height of 198 nm and a CGP of 54 nm, implying a Bohr density of 137.8 MTr/mm², on par with TSMC N5 or Samsung SF4. However, the difficulty is cumulative. Each step is individually plausible, but together they make N+4 harder than the transition from N+2 to N+3. It will likely take longer, cost more, and carry less process margin. A theoretical N+5 would require a larger integration shift. One possible path is backside contacts (BSCon), moving power routing and source/drain contacts to the backside, which would reduce front-side routing pressure and enable another reduction in cell height. The front-side metal pitches could relax to reduce the process complexity. M0 would likely relax slightly to ~34 nm, and M2 and M4 pitches could relax further. CGP is unlikely to shrink much further. Even with EUV, 48 nm has been the practical limit for yield and process control. This approach would allow N+5’s cell height to fall to 170 nm and its CGP to 53 nm. This implies a Bohr density of 163.6 MTr/mm², on par with Intel 18A’s HP library. However, this would not make N+5 cost-competitive with the leading edge. It would reach a similar density through a much more expensive route. The integration difficulty rises sharply, with new process flows for backside alignment, wafer thinning, contact reveal, and backside metallization. Past this point, standard density and interconnect scaling become increasingly unattractive. That is where Huawei’s roadmap stops looking like a normal foundry roadmap and starts looking like a packaging roadmap. At ISCAS 2026, Huawei unveiled its tau (τ) scaling law, reframing process scaling in the time domain. τ is the time cost of data movement and processing: switching delays in transistors, RC signal propagation delays in circuits, compute, memory, and networking latency. Outside Huawei’s terminology, this is called system-technology co-optimization. This is Huawei’s answer to its lack of EUV lithography. Without EUV, planar density cannot keep pace with TSMC, Intel, or Samsung. If transistor density cannot shrink further, Huawei’s alternative is to shorten wires, reduce buffering, and stack logic vertically. “LogicFolding”, Huawei’s implementation of this new scaling idea, is, in practice, an aggressive 3D stacking approach. AMD V-Cache places SRAM above or below a CPU die. AMD’s MI350X places active interposer dies (AIDs) underneath accelerator and compute dies (XCDs), with the AIDs handling cache, IO interfaces, the network-on-chip (NoC) and embedded metal-insulator-metal (MIM) capacitors. With LogicFolding, parts of the same logic block are split across multiple active dies bonded face-to-face at ultra-fine pitch. This allows Huawei to shorten some critical paths and reduce buffer overhead, not merely add cache capacity or offload the IO and interconnect. Shortening wires is where the higher clocks come from. A large share of a modern core’s delay and energy budget goes into driving long interconnects and the repeater buffers along them. LogicFolding distributes a block’s critical-path gates across multiple stacked tiers bonded at a very fine pitch, so the bond interface behaves like an additional metal layer and the longest paths get shorter. That is how Huawei expects to recover frequency and efficiency it cannot get from the process alone. Huawei’s roadmap shows its intent. Prime core frequency is targeted to rise from 2.75 GHz in the Kirin 9030 to roughly 5 GHz by 2031, far beyond what planar scaling alone could deliver. Prime cores with 3.1 and 3.39 GHz clocks are being tested in its labs, although their power consumption is unknown. Beyond that, chips are in the design, simulation or pathfinding phase, meaning the frequencies are targets. However, the direction matters more: LogicFolding also helps with performance, not just density. The catch is that Huawei’s density claim is not directly comparable to foundry densities. A stacked design can report more transistors per package footprint by adding active layers, even if each patterned die remains well behind TSMC or Intel in front-end density. This is how Huawei can claim to reach foundry 14A-equivalent density by 2031. This is not a like-for-like foundry comparison, with Huawei using stacked logic and measuring density per package footprint. On a normalized Bohr-density basis, SMIC N+3 is ~114 MTr/mm², 38% less than Intel 18A’s HD library. Huawei’s 3D roadmap closes the gap by stacking active logic, reaching 215 MTr/mm² by 2030. In 2031, the roadmap density jumps to 295 MTr/mm², implying either a third active layer, partial EUV insertion or aggressive planar DUV scaling. Huawei’s methodology makes other foundries look much denser as well. Applying it to AMD’s MI450X with an N2 top die on an N3P base die yields a theoretical density of 460.2 MTr/mm² in 2026, compared with Huawei’s 295 MTr/mm² in 2031. This Kirin 9030 does not use LogicFolding, remaining in a conventional mobile SoC package. Instead, it forms the baseline for how far Huawei and SMIC can push planar scaling. Future teardowns of Kirin and Ascend chips will show both planar logic density and Huawei’s hybrid bonding solutions. Export controls changed China’s optimization problem rather than ending it. EUV restrictions raised the cost and complexity of leading-edge manufacturing without freezing it. SMIC reaches N6-class logic density through DUV immersion, SAQP and DTCO, while Huawei shifts more of the burden onto architecture, packaging and system-level integration. Future nodes will be tougher. N+3 still had room to tighten local metals and reduce cell height and CGP. Further scaling without EUV leaves fewer levers. More aggressive multi-patterning adds masks and overlay error. SMIC can keep pushing DUV, but each step will get more expensive and less forgiving. The design side is just as critical. Huawei had domestic EDA tools and flows before the Kirin 9030, with the Kirin 9000s, 9010 and 9020 making that clear. Huawei was able to ship multiple consumer SoCs on SMIC N+2 and N+3 while cut off from the Western EDA stack. US export controls restricted EDA tools for advanced chips in 2022 but did not target tools for more mature chips. In 2025, the US government briefly placed much broader restrictions on EDA software from Synopsys, Cadence, and others, before lifting them less than two months later as part of a trade deal tied to rare earths. Huawei has been unable to access those tools because it remains on a US trade blacklist. That forced Huawei, SMIC and Chinese academic institutions to build their own tools and flows. Researchers at Peking University recently announced a prototype EDA tool for Huawei’s LogicFolding architecture, which requires a new flow to handle the multilayer layout and floorplan. This is not the same as replacing the full Synopsys or Cadence stack, but it shows where domestic EDA is headed: toward tighter co-optimization between architecture, process and packaging. These advances are also diffusing into the Chinese ecosystem. SMIC is licensing its N+2 and N+3 processes to HLMC/Hua Hong at the government’s direction rather than by choice. If the same process learning feeds into Ascend accelerators for AI training and inference, the choke point shifts from one named fab to an ecosystem. Alibaba’s T-Head silicon arm and Cambricon, a Chinese AI chip designer that is expected to supply ByteDance, could also be major beneficiaries. Sanctions aimed at SMIC alone become less effective once the manufacturing knowledge has spread to other fabs and design houses. China is not closing the gap with Intel, Samsung and TSMC. The teardown shows the opposite in several places: no EUV, no backside power, higher process complexity, and visible trade-offs. But China is still advancing. If domestic chips become good enough for phones, inference, networking and security-sensitive workloads, they can matter strategically without matching TSMC at the leading edge. Behind the paywall, we show what else STEEL can do, with material and process flow analysis of SMIC N+3, and analysis of the Kirin 9030 package. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline, access the full Kirin 9030 and SMIC N+3 analysis or to commission a custom teardown, contact sales@semianalysis.com.
35th Annual RockFest wraps up at Tellus Science Museum
If you are looking to dig into some hands-on family fun before the weekend slips away, a massive, brilliant display of Earth's natural treasures is waiting for you straight up Interstate 75. The 35th Annual RockFest is wrapping up its final afternoon of action at the Tellus Science Museum in Cartersville. The highly anticipated, two-day weekend spectacular stands as the Southeast’s premier gathering for geology hobbyists, fossil hunters, and families looking to spark an early passion for earth science in their children.
Royals' Vinnie Pasquantino: Looking at 4-to-6-week recovery
Royals' Vinnie Pasquantino: Looking at 4-to-6-week recovery
Affordable Summer Entertainment in Central New York
Looking for affordable ways to enjoy summer without traveling far from home?
GTA 6 Release Date Update Revealed
A new GTA 6 release date update has been revealed, and it's good news for those looking forward to Rockstar's new Grand Theft Auto.
14 Healthy Father’s Day Gifts Dad Will Actually Use
Looking for healthy Father’s Day gifts? From walking shoes to sleep-friendly gadgets, these 14 ideas can help support your dad’s health.
The Best Time to Take Vitamin E for Better Skin Health
Looking for the best time to take vitamin E for skin health? Dietitians say timing matters less than what you pair it with.
Looking ahead at 5 big Steelers training camp position battles
The Steelers will get together for training camp in a month and these five position battles will be the ones to watch.
Resellers asking high prices for Mamdani's affordable World Cup shirts
The NYC-themed jerseys have popped up on sites like Facebook Marketplace and eBay, where sellers are looking for as much as $999.
A year after the Hortmans were killed, legislators are still looking over their shoulders
Minnesota politicians are balancing grief, security and purpose as they adapt to life after the June 14 attacks.
UC grads launch mobile ice cream business
The duo moved to Cincinnati and 2012 and were looking for a new, fufilling venture in addition to their full-time jobs.
Bars, restaurants looking forward to bump in business from World Cup
The United States’ World Cup matchup with Paraguay on Friday night is stoking a lot of excitement and a lot of commerce for businesses in the Susquehanna Valley.
Miami Marlins vs. Pittsburgh Pirates: Sandy Alcantara vs. Braxton Ashcraft
The Pirates are at PNC Park looking to grab a win today.
Dolphins 90 in 90: Cam Miller looking for QB3 role
Can Cam Miller hold off a former rival quarterback and force the Dolphins to keep three passers on the roster?
Where to Visit in West Hollywood 2026: West Hollywood Travel Ideas
West Hollywood is one of the best travel destinations for music lovers, culture enthusiasts, and everyone looking for a summer getaway. Book your trip here
The Latest: Trump says he's really close to a deal with Iran ahead of whirlwind weekend
President Donald Trump has long been looking for this weekend to be a big one for his presidency
Friday sports: R & B on the road
The Watertown Red & Black is looking for it’s third straight win.
CBS Sports names surprising Wisconsin football breakout player in 2026
When looking at the Wisconsin Badgers football roster, CBS Sports highlighted one player in particular as a breakout candidate.
Matt Damon is ready to wake up the “Bourne” franchise and is looking for ideas
Damon was regularly churning out entries in the action series every three to five years, but it's been 10 years since the fifth and last film, "Jason Bourne."
Matt Damon is ready to wake up the 'Bourne' franchise and is looking for ideas
After 10 years, Matt Damon is ready for more Jason Bourne. The Hollywood titan says he's up for another film in the 'Bourne' franchise any time, but is looking for input on what shape it might take.
Science flags paper that found AI chatbots help debunk conspiracy theories
Science has issued an expression of concern for a highly publicized study looking into whether conversations with AI chatbots could convince conspiracy theorists to abandon their beliefs. The move …
Using AI for medical advice; pelvic floor exercises; the hidden dangers of burning incense; plus other stories with Vanderbilt Health sources
Colin Walsh, MD,Associate Professor of Biomedical Informatics, was on WTVF News Channel 5‘s “Morningline” show in an interview about whether or not it is safe to use AI for medical advice. Time magazine reporter Stacey Colino interviewed Elisabeth Sebesta, MD, Assistant Professor of Urology, for a story about pelvic floor exercises for issues including menopause, erectile dysfunction and urinary incontinence in men. “Each Breath,” published by the American Lung Association, quoted Brian Christman, MD, Adjunct Professor of Medicine, for a story about the hidden dangers of burning incense. William Schaffner, MD, Professor of Preventive Medicine, was quoted by several news outlets about public health issues, including: Healthline (low vaccination rates lead to more cases of measles, whooping cough and other preventable diseases); ABC News (U.S. measles cases surpass 2,000 for second year in a row); and CIDRAP News (high-dose flu shots cut rates of hospitalization in older adults). Sarah Rohde, MD, Associate Professor of Otolaryngology-Head and Neck Surgery, was quoted in a People magazine story on patient Makalii Andrade, a surfer from Kauai Island who suffered a serious neck injury in 2022 and recently underwent surgery at Vanderbilt Health to begin the final phase of his recovery. James Crowe, MD, Director of the Vanderbilt Center for Antibody Therapeutics, for a piece in Nature about antibodies against a strain of Ebola. SFGATE reporter Gillian Mohney interviewed Xue Zhong, PhD, Research Assistant Professor, Division of Genetic Medicine and Clinical Pharmacology, for a story about a study of a blood test looking at Alzheimer’s disease biomarkers. Matthew Franklin Mart, MD, Assistant Professor of Medicine, was quoted in a Healio story about how inflammation and illness severity is linked to less cognitive resilience after a person has been an ICU patient. The “How We Really Feel” podcast host Sula Windgassen, PhD, interviewed Lindsey C. McKernan, PhD, MPH, Associate Professor of Psychiatry & Behavioral Sciences, Physical Medicine & Rehabilitation and Urology, for an episode focusing on pelvic and bladder health. The podcast is also available on YouTube and the podcast website. In addition, podcaster Monica Sanford interviewed cardiologist Mark Glazer, MD, for her podcast “The Monica Sanford Show”; the two-part interview is here and here.
I'm 40 and looking forward to being 80
Megan Walton, 40, has been the CEO of a large senior services organization for seven years. The job has radically changed her attitude toward aging.
You are witnessing an independent movement in Idaho politics
Because primary elections often nominate candidates who are either too extreme or unlikely to win, many voters are looking for a better option, writes Rod Gramer.
Is It Time To Reassess Live Nation Entertainment (LYV) After Recent Regulatory Scrutiny?
Wondering whether Live Nation Entertainment at around US$167.50 is priced for perfection or still offers room for value is a fair question for any investor looking at the stock today. Recent returns, including 2.0% over the past week, 2.8% over the past month, 15.3% year to date and 16.7% over the last year, along with a 92.4% three year return and 92.0% five year return, show how much sentiment on the stock has shifted over different time frames. Recent news coverage has focused on Live...
The Herald's weekly entertainment picks
Looking to be entertained from Thursday, June 11, through Wednesday, June 17? Check out the Skagit Valley Herald’s weekly recommendations.
WATCH: Trump says he's 'not looking to renew' U.S. trade deal with Canada and Mexico
Without a commitment by July 1, the trade deal would face annual reviews of its status and possibly expire in 2036.
Maryland District Shops Elementary Science Curriculum; Texas System to Buy K-12 Instructional Materials
A Maryland district is looking for elementary science materials, while a Texas school system seeks instructional materials and teacher aides across grades and subjects.
World Cup travel boost hasn't materialized for U.S. businesses
The expected travel boom from the World Cup is looking like it will be a city-by-city, match-by-match test of pricing power.
More than a Perk: 401(k)s are a Benefit Small Business Leaders Can’t Afford to Ignore
Two leaders discuss how automation, transparency, and smarter pricing for 401(k) plans are changing the game for employers looking for a competitive advantage.
Brookfield couple launches natural detergent business
If you’re looking for a softer laundry detergent for your young family, look no further than Brookfield’s Beba Bubbles.
Lord help me, Fable's behind-closed-doors demo has got me very excited
It may be early days, but Fable is already looking like a real success
Beshear endorses Dembo in race for Kentucky's sixth congressional district
Dembo is looking to flip Kentucky’s sixth congressional district from red to blue
Reflecting On Media & Entertainment Stocks’ Q4 Earnings: EchoStar (NASDAQ:SATS)
Quarterly earnings results are a good time to check in on a company’s progress, especially compared to its peers in the same sector. Today we are looking at EchoStar (NASDAQ:SATS) and the best and worst performers in the media & entertainment industry.
Highlights from Day 1 of Baltimore Ravens minicamp
We're looking at the sights and sounds from Day 1 of the Baltimore Ravens mandatory minicamp
Steven Spielberg exposes the truth about his latest extra-terrestrial thriller 'Disclosure Day'
Steven Spielberg is still looking to the stars. The 'E.T.' filmmaker and actors Emily Blunt, Josh O'Connor, Colman Domingo, and Colin Firth declassify their mysterious thriller 'Disclosure Day.'
Nomad’s best Qi2 25W wireless charger just got a transparent version, and I can’t stop looking at it
The Stand One charger from Nomad got a massive visual upgrade that leaves the view of the Qi2 wireless charging...
Switch 2 is accidentally getting the best looking Final Fantasy game
Final Fantasy Resonance goes full Octopath Traveler in a new Switch game that's excitingly being compared to Brave Exvius
From Classroom to Racetrack: How Charlie Baur is Building a Motorsports Career in a Business Discipline
Charlie Baur can trace his racing story back to a Christmas morning in Michigan — the kind that starts with snow on the ground and ends with a throttle in a kid’s hands. “I remember being 3 years old and then for Christmas that year, my parents had gotten me a 120 cc snowmobile,” Baur said. Long before sprint cars, he was a Michigan kid on snowmobiles, dirt bikes, four-wheelers and jet skis — and a regular at car shows and races with his family. Photo courtesy of Charlie Baur That early exposure became a calling. At 12, he sat in a sprint car for the first time and knew he’d found the next chapter. He started in quarter midgets, moved to go-karts, and the day before he turned 16 — one day shy of the minimum age required by track insurance — he made his first sprint car start after convincing officials to let him race. Five years later, Baur is still pushing forward, now racing sprint cars on both pavement and dirt while pursuing an automotive business education at Northwood University — with a clear-eyed understanding that motorsports encompasses more than what happens under the lights on Saturday night. “It’s a business,” said Charlie, a 20-year-old who calls Fenton, Michigan, home when he’s not at a racetrack or at Northwood’s residential campus in Midland, Michigan. Photo courtesy of Charlie Baur Racing is the product — but preparation is the job To the average fan, race day begins around dinner time. For a team, race day can be a 12-hour shift — plus the work that came before it. And Baur’s racing operation is a family affair. “The team is my parents and myself,” he said, explaining they own the cars, maintain equipment and manage the business side — from sponsor relations to budgeting. On race weekends, the core group includes Baur and his parents (Eric and Stefanie), plus a couple of additional hands (Alex Photiou and Robert Flannigan) who help with the intensity and pace of trackside work. That structure has shaped how he thinks about efficiency and professionalism. “We’ve always kind of had the mentality of we’re never working on the car for maintenance at the track,” he said. “Our goal is to do as little work as possible to the car because it should be ready when that car rolls out of the trailer to go racing.” That mindset shows up in routines: bolt checks, tire procedures, safety equipment and a repeatable process designed to limit errors. “Once I fire the car up and put my helmet on, that’s when it’s go time,” he said. “You can plan as much as possible for how the race is going to play out, but until you take the green flag … you don’t know how it’s going to go.” Photo courtesy of Charlie Baur First-generation driver, student of the game In racing, “first-generation” matters — and Baur wears that label with pride. “A lot of the drivers are third or fourth generation,” he said. “My family has never been in motorsports. So for me, we’ve always looked at it as we’re new to it and we want to be as different as possible. From a marketing standpoint, it helps us stand out.” It also pushes him to seek out mentors — especially veteran drivers who have seen every scenario, solved every problem and won in multiple eras. Baur credits accomplished driver Jason Blonde, a 10-time champion, for becoming his driver coach and helping him develop as a competitor. “To me, learning from Jason helps me because he has had lots of success and knows what to do,” Baur said. “You have to humble yourself and say, ‘I don’t know what to do; can you help me out?’” That willingness to learn extends off the track, too. Baur says one of his biggest challenges is not a mechanical limitation, but credibility. “It’s my age,” he said. “Some people won’t take me seriously because I’m so young. Even though … I do know what we’re talking about and have a general idea.” His answer has been to out-prepare, out-communicate and treat the operation like a real enterprise — because it is. Photo courtesy of Charlie Baur Northwood’s role: Turning passion into a plan Baur is majoring in automotive aftermarket management and pursuing an accelerated path that pairs undergraduate study with graduate work. He’s also exploring how to align his studies with motorsports-focused coursework as Northwood advances related programs and pathways. He sees the value clearly: motorsports needs business-literate professionals who understand budgets, sponsorship, marketing, operations and long-term strategy — and who can translate between the language of the shop and the language of the boardroom. That’s why his Northwood experience isn’t limited to the classroom. He has been involved with the Northwood University International Auto Show and serves as motorsports chair — a leadership role that demands outreach, contracts, coordination and a steady professional demeanor. “There’s so much outside work that makes the auto show successful that people don’t realize,” he said. “And it is truly student led.” He’s also participated in industry experiences through Northwood at major events such as AAPEX, SEMA and PRI, along with other automotive networking events — opportunities he describes as a fast track to understanding how business really gets done. “You learn a lot in the classroom,” he said. “But if you learn it and you can’t apply it to the real world, it loses its value. Or if you learn it and can apply it, but you don’t know anyone, it is still of no value.” In his words, Northwood helps him win because it “gives me the tools to succeed” — including flexibility and faculty support as he balances travel and racing commitments with academics. Photo courtesy of Charlie Baur Racing as an ecosystem — and a talent gap waiting to be filled Baur is blunt about what he sees across the motorsports world: a deep bench of experienced professionals, and not enough young talent entering the pipeline. “I go to car shows, I go to these different events, and typically … the average age is between 45 to 55,” he said. “There’s not a lot of young people going into the motorsports world.” That reality reinforces Northwood’s communications focus: positioning motorsports not as a narrow lane, but as a wide ecosystem of business careers — sponsorship, logistics, data, media, leadership, hospitality and innovation — with real demand for prepared graduates. It also shapes how Baur talks to younger students who love racing but aren’t sure what their future looks like. “If you have a passion for motorsports, there’s gonna be a spot for you somewhere,” he said, emphasizing that driving is only one of many career paths — and that local tracks and hands-on experience are often the best first step. But if someone is interested in driving as a career path, it will take a team to make that happen. Baur’s team includes Stahl’s Motors and Music Experience, Rhino Racing, Randy Wise Buick GMC Chevrolet, Western Michigan Fleet Parts, Mother’s Polish, Schaeffer’s Oil, Hepfner Racing Products, Ameriguard Storage Centers, Justice Brothers, Race 1 Wraps, TBM Brakes, Behind Your Design, CharlieBaur.com and Northwood University. “There are so many people who invest not only in myself but in my race team and who believe in us to succeed,” he added. Pictured: Charlie Bauer’s sprint race car. Looking ahead: A headline worth chasing Ask Baur to imagine 2035, and he’ll give you two answers — one dream, one blueprint. “In a perfect world,” he said, “winning the Indy 500.” Realistically, he wants to build a life where business ownership and racing reinforce each other and where he can pay forward the help he has received by mentoring younger drivers, especially those trying to break into motorsports without a family legacy. “When I retire from full-time racing, I want to be able to provide the same opportunities that were presented to myself to the next generation of drivers,” Baur said. “I know how difficult it is to get your foot in the door.” For now, the focus is simple: keep building the operation, keep learning the business, and keep showing up prepared — because in sprint car racing, as in life, process matters. And once the helmet goes on? “It’s go time,” Baur said. Photo courtesy of Charlie Baur Learn more Students interested in motorsports careers — whether in competition, team operations, marketing, finance, sponsorship, data, or management — can explore opportunities through Northwood University’s Center for Automotive and Mobility Studies. For Charlie Baur’s latest motorsports adventures, follow Charlie_Baur and Charlie Baur Racing on social media. To learn more about Northwood’s Bachelor of Business Administration in Automotive and Mobility Studies and motorsports management concentration, visit www.northwood.edu/programs/automotive-mobility-studies/. Photo courtesy of Charlie Baur Pictured: Charlie Baur at Butler Motor Speedway on May 31, 2026. Share this page