SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " class " 3,746 found 🔀 AI-powered Shuffle
Twins 16, Diamondbacks 8: The Beautiful Game
In the dumbest Twins game any of us will see all year, the Twins jumped out to your classic 16-0, fifth-inning lead, then handed the ball over to the bullpen to drag us kicking and screaming towards a finish line placed just ahead of 12:30 am CT. You’ve maybe never seen a former All-Star become […]
Sunday Morning Showdown: Vacheron Constantin Overseas Self-Winding Vs. Girard-Perregaux Laureato Fifty 39mm
✓ Sunday Morning Showdown ✓ Vacheron Constantin's Overseas takes on Girard-Perregaux's Laureato Fifty ✓ Two stylish classics ✓ Vote here! ✓
Biden scores temporary court victory as Trump appointed judge delays release of Hur investigation materials
Former President Biden wins a three-week injunction blocking release of audio recordings from Special Counsel Hur's classified documents investigation.
Galaxy Watch 9 and Ultra 2 leaks reveal more changes, no Classic after all [Gallery]
Ahead of Samsung’s July event, new leaks are revealing a few more details about Galaxy Watch 9 and Galaxy Watch...
Eli Manning and Peyton Manning headline Sugar Bowl’s New Orleans Sports Hall of Fame class of 2026
Eli Manning and Peyton Manning headline Sugar Bowl’s New Orleans Sports Hall of Fame class of 2026
What a middle-class income means in every US state
A recent SmartAsset study revealed the income needed to be considered middle class in every US state. See where yours falls.
‘The Cardinal Countdown: 78 Days Until Kickoff’
CHARLIE EDGEWORTH #78 Height: 6’7” Weight: 320lb Position: OL Class: Freshman Hometown: Chattanooga, TN Summary: While its not right, and should not be acceptable in our country, I’m out here fighting the good fight and have yet to gain the momentum I need to avoid this blatant hate and bias. I’m of course talking about […]
CT Culture Corner: Shepard Fairey exhibit, Somi concert this week
The artist responsible for Obama's "Hope" poster and the "Obey" graphic comes to New London Museum, Irish dance in Torrington and who wrote the classic "Danny Boy," anyway?
A mom asked for a free business-class upgrade for her son — and the Delta flight attendant handled it like a pro
Reddit users cringed, but it took a true professional to nail the response.
Doom Composer Bobby Prince Dies at 81
Robert Caskin 'Bobby' Prince III, the composer behind classic '90s games like Doom and Duke Nukem 3D, has died at 81.
Doom Composer Bobby Prince Has Died
Bobby Prince, composer for Doom and other classic shooters, has died.
Potawatomi Ventures launches business program for Native entrepreneurs
Bwadwét Innovation Community is offering a new entrepreneurial training program for members of the Forest County Potawatomi, with classes ranging from marketing to legal readiness to financing.
Colman Domingo explains his 'wild' theory about Hitchcock classic 'Rear Window'
Colman Domingo doesn't play about his favorite films, but he does hold one playful theory about the best of his best — 'Rear Window,' which blew the mind of TCM host Ben Mankiewicz.
Colman Domingo explains his 'wild' theory about Hitchcock classic “Rear Window”
Plus, the "Disclosure Day" star tells TCM why he considers Jimmy Stewart his "North Star as an actor."
The “Science of Learning” Is Less Controversial Than It Used to Be
A new report tackles the challenge of integrating the science of learning into the routines, systems, and structures that shape teachers’ daily work.
Better Sports Club awards banquet celebrates Arlington students, coaches
The 70th annual Better Sports Club of Arlington awards banquet honored high school student-athletes, along with their coaches and boosters, for successes during the 2025-26 school year. More than 30 high school seniors received awards for their overall excellence during competition, in the classroom and in the community. The June 9 event was held at
Arts and Entertainment Agenda, June 19-25
Food & Wine Classic in Aspen, June 19-21 Chefs, vintners and food lovers converge for the 2026 Food & Wine Classic in Aspen this weekend from June 19 to 21. The leading culinary event has...
Trying BLT sandwiches at Subway, Jimmy John's, Jersey Mike's; best
I ordered a BLT from Subway, Jimmy John's, and Jersey Mike's to see which popular chain offered the best value and version of the classic sandwich.
The unwanted return of tetanus; why soccer makes people so happy; breast cancer in men; plus other stories with Vanderbilt Health sources
Women’s Health interviewed Kathryn Edwards, MD, Sarah H. Sell and Cornelius Vanderbilt Professor of Pediatrics, for a story about her JAMA Viewpoint article on tetanus making a comeback. Women’s Health interviewed Colin Armstrong, PhD, Assistant Professor of Clinical Psychiatry and Behavioral Sciences and Assistant Professor of Physical Medicine and Rehabilitation, for a story tied to the World Cup about why soccer makes people so happy. An NBC News story about the announcement by “X-Men” actor and former wrestler Tyler Mane that he has breast cancer quotes Ben Ho Park, MD, director of the Vanderbilt-Ingram Cancer Center. The story focuses on how a prominent man with breast cancer may help remove some stigma from a cancer that is rare in males. Prevention magazine interviewed Caitlyn Mooney, MD, Assistant Professor, Department of Orthopaedic Surgery, for a story about a BMJ study that suggests 90 to 120 minutes per week of strength training may lower the risk of death. William Schaffner, MD, Professor of Preventive Medicine, was quoted by several news outlets about public health issues, including: Women’s Health (norovirus is more common this summer); SFGate (measles in San Francisco just before the World Cup crowds); Travel + Leisure (how to avoid getting sick on a cruise); and Fox News (mosquito-borne diseases). Reporter Liz DeSantis from WKRN News 2 aired a story on the rehab unit at Monroe Carell Jr. Children’s Hospital at Vanderbilt. Kat Hedden, PT, DPT, PCS, CBIS, Acute Pediatric Physical Therapy Clinical Team Lead and Mary McLanahan, MD, Assistant Professor of Physical Medicine and Rehabilitation were interviewed, as well as the family of patient Will Terry. Reporter Nikki Hauser from WTVF News Channel 5 interviewed Graden Knapp, Gaming and Technology Specialist at Monroe Carell Jr. Children’s Hospital at Vanderbilt about his 3-D wheelchair project. Tennesseanreporter Sandy Mazza covered the announcement of the latest Leadership Nashville class, which includes Jane Freedman, MD, Deputy CEO, and Chief Health Systems Office for Vanderbilt Health; and also the announcement of the latest Leadership Tennessee cohort, which includes Jeff Upperman, MD, Surgeon in Chief at Monroe Carroll Jr Children’s Hospital at Vanderbilt.
1996 Olympics to FIFA World Cup: Historians compare culture, class and politics in the ‘Black Mecca’
How do the 1996 Olympics and 2026 World Cup compare three decades apart when it comes to fandom, overall electricity and economic inclusion?
Congrats, Class of 2026! See Scenes from This Year's Commencement Ceremonies
Cal Poly hosted commencement ceremonies for all six colleges on June 13 and 14, 2026.
Lenoir-Rhyne Announces Sports Hall of Fame Class of 2026
HICKORY, N.C. - The 2026 Lenior-Rhyne Athletics Hall of Fame class has been announced, featuring seven athletes, two contributors, and two teams of distinction.
Six from Lacrosse and Hockey Named to CSC Academic All-District Teams
SCHENECTADY, N.Y. – Six members of the Union College men's hockey and men's lacrosse teams were recognized for their work in competition and in the classroom with spots on the 2026 CSC Academic All-District Men's At-Large Team, selected by College Sports Communicators and announced on Tuesday.
Shubman Gill surpasses MS Dhoni, enters elite India ODI list
Shubman Gill achieved a significant milestone by reaching 1,000 ODI runs in just 954 balls, surpassing MS Dhoni. This feat came during his brilliant 154 against Afghanistan, where he partnered with Ishan Kishan for a massive 224-run stand. Gill's century, his ninth in ODIs, was a masterclass in aggressive batting, further solidifying his status as a top modern-day Indian batter.
Fed's Kevin Warsh signals change with new task forces
New Fed chair Kevin Warsh is using classic corporate strategies to guide monetary policy changes and signal a leadership shift.
A season of festivals, special events and America 250 celebrations
The Florida Keys is turning up the heat with summer events this season running from Key Largo to Key West. Think local traditions, world-class culinary festivals, and landmark America 250
FAMU Sports Hall of Fame announces 50th anniversary celebration
The FAMU Sports Hall of Fame will celebrate its 50th Anniversary with the induction of its newest class on Sept. 18, 2026, at the Al Lawson Center.
A Mamdani-backed progressive’s challenge to a veteran Democrat highlights party fractures
The divides between the Democratic old guard and a new class of progressive challenger were on sharp display on Tuesday night as a congressional candidate in New York’s 13th District apologized for past disparaging remarks about Kamala Harris.
Passenger finds nearly empty Emirates business class cabin on short flight
What it's like flying in premium class with Icelandair; upgrade worth it
My upgraded seat in Icelandair's Saga Premium class came with meals, a comfy seat, lounge access, and other perks that made the price worth it.
Xbox is porting two classic Call of Duty games to PlayStation — and they're coming very, very soon
Call of Duty: Black Ops and Black Ops 2 will soon finally be playable on modern PlayStation systems.
Survey reveals political and cultural factions shaping the midterms
Examine Pew’s survey on types of voters and analyze differences across key political demographic groups
Department of Energy Selects 36th Class of Computational Science Graduate Fellows
Twenty-nine students working toward achieving doctorates in fields that emphasize the use of computing and mathematics have been selected for the Department of Energy Computational Science Graduate Fellowship (DOE CSGF) program.
The return of the spoils system could reshape U.S. federal science
The Trump administration has reclassified 8,000 senior-level career officials across 54 agencies to Schedule Policy/Career status.
San Diego County Fair brings classic treats, entertainment to Rady Children’s Hospital
The San Diego County Fair brought music, entertainment, and classic fair treats to patients and families at Rady Children’s Hospital, providing a sense of normalcy for those unable to attend …
FOX Sports' BIG NOON KICKOFF Heads Across the Pond for Inaugural Union Jack Classic From Wembley Stadium
LOS ANGELES – As announced on FOX’s FIFA WORLD CUP LIVE ahead of this afternoon’s England-Croatia matchup on FOX, BIG NOON KICKOFF heads overseas for the first time in the program’s history, broadcasting live from historic Wembley Stadium in London ahead of the inaugural Union Jack Classic on Saturday, Sept. 19.
UNITE HERE: PENN Entertainment Shareholders Approve Board Declassification Proposal
UNITE HERE announced today that PENN Entertainment, Inc. (NASDAQ: PENN) shareholders approved the advisory proposal to declassify the Company’s Board of Dire...
3 new inductees into Birmingham Business Hall of Fame: Barber, Mouron, Thornton
🚨2026 HOF CLASS: Kiwanis Club of Birmingham announced this week the list of Birmingham Business Hall of Fame inductees.
Political scientist examines how Brown won Trump’s Ohio : University of Dayton, Ohio
University of Dayton political scientist Christopher Devine examines Sherrod Brown’s unapologetically liberal record, working-class message campaign.
Six Named to CSC Academic All-District Women's At-Large Teams
SCHENECTADY, N.Y. – Six Union College student-athletes spanning three sports were recognized for their work in competition and in the classroom with spots on the 2026 CSC Academic All-District Women's At-Large Team, selected by College Sports Communicators and announced on Tuesday.
How Launcher Dover helps build Delaware’s downstate small business ecosystem
By prioritizing collaboration over competition, local leaders are building a more cohesive ecosystem for Kent County’s growing business class.
Georgia gubernatorial candidate Rick Jackson, in his GOP runoff election victory, says his campaign "shattered" the political class
‘The Rocky Horror Picture Show’ Coming to Las Vegas’ Sphere
Sphere Entertainment will "enhance" the 1975 cult classic for the massive venue.
Skill game ruling leaves Pennsylvania businesses facing possible taxes, new regulations
A Pennsylvania Supreme Court ruling that classifies skill games as gambling devices is raising concerns among small businesses that rely on the machines for extra revenue.
MSU announces naming of Greene College of Science & Engineering, cementing eastern Kentucky family legacy
Morehead State University is honored to announce the naming of the Greene College of Science & Engineering in recognition of a significant and generous gift from Drs. Randy (Class of 1967) and Judy Greene. Approved by the MSU Board of Regents at the meeting on June 12, the college naming will take effect on July 1. A formal recognition and transition will occur later in the year. To learn more about the College of Science & Engineering and its programs, email dsci@moreheadstate.edu or call 606-783-2626. For more information on the Greene Family Scholarship Endowment, or to establish your own, contact MSU’s Office of Alumni Relations & Development at 606-783-2033 or email giving@moreheadstate.edu.
Syracuse schools receive $4M to tackle mental health crisis in classrooms
Syracuse City School District students facing mental health crises will soon have more trained professionals to turn to.
WVPEC, WVU partner with Pittsburgh Penguins to take hockey-themed STEM lessons into classrooms
Elementary school students in West Virginia and Pennsylvania will soon explore science through the lens of hockey thanks to a new partnership involving the West Virginia Public Education Collaborative and the STEAM Technical Assistance Center, housed in the West Virginia University Office of the Provost, and the Pittsburgh Penguins Foundation.
In 2018, Scientists Recorded An Orca Mimicking Human Speech For The First Time
Included in the repertoire are such human classics as "hello", "bye bye", and a long farting noise.
Scientific American Unveils Inaugural Class of Young American Scientists, Celebrating the Next Generation of Innovators
NEW YORK, June 16, 2026--Scientific American announces The Young American Scientists Class of 2026.
These 36 Scientists Are Leading the Way to Biomedical Discoveries
On June 16, Pew announced the 2026 class of Pew Scholars Program in the Biomedical Sciences, Pew Latin American Fellows Program in the Biomedical Sciences, and Pew-Stewart Scholars Program for Cancer Research. These researchers will receive multiyear grants and join a community of more than 1,000 scientists who are taking creative approaches to cancer biology, neuroscience, immunology, and more.
Ohio State trending for five-star defensive lineman
Ohio State is quickly becoming the favorite to land a five-star defensive linemen in the 2027 class.
Class action lawsuit claims radiology vendor Nano-X Imaging misled investors
The Israel-based manufacturer allegedly made “misleading statements” regarding its business operations and prospects, attorneys charge in the complaint, filed June 12.
Indiana attorney general targets abortion pill mifepristone as water risk. Health experts dispute the claim
Indiana’s Attorney General joined 13 other states to call for the EPA to classify the abortion inducing drug mifepristone as a water contaminant, arguing it could pose a health risk. Health experts say there’s no evidence for his claims.
Veteran Sire Social Inclusion Returns To Pennsylvania In 2027
Social Inclusion, a classic-placed runner and veteran sire, will return to Pennsylvania for the 2027 breeding season, standing at Bonner Hill Farms in Littlestown, Pa. The announcement was made Monday via the Pennsylvania Horse Breeders Association's social media accounts. The 15-year-old son of ...
United is blocking middle seats on its new Airbus A321XLRs
The new premium-economy set-up resembles a "Eurobusiness" class and will likely come at an upcharge.
Sally Field couldn’t understand this classic Hollywood actor on set: 'I don’t know if he was stoned or what'
Sally Field is revealing the classic Hollywood actor who she just couldn't understand at all whenever they interacted on set.
6 Ways to Make Economy Feel Like Business Class
Economy seats are usually the best bang for your buck, but not always the most comfortable. Here's how to upgrade the otherwise bare bones experience.
Microsoft sued by shareholders over expenses, cloud business, AI
Microsoft has been sued by shareholders who accused the company of defrauding them and inflating its stock price by failing to disclose slowing growth in its Azure cloud business and the need to spend billions of dollars on AI infrastructure. The proposed class action led by a Michigan pension fund was filed in Seattle federal court on Friday, after Microsoft shares fell 10% on January 29 in response to its quarterly earnings report a day earlier. About $357 billion of market value was erased, and Microsoft's stock suffered its biggest one-day decline in nearly six years.
Arkansas Business Announces the 20 in Their 20s Class of 2026
Arkansas Business recognized 20 individuals for 2026 who made significant impacts in their companies, organizations and communities.
Haiti’s World Cup dream is bigger than sports
Official MLS highlights, classic matches, video series and features.
From Managing Processes to Driving Outcomes: Oracle’s Latest AI Push Aims to Rewire Business
With a new class of enterprise applications that execute end-to-end processes, Oracle is showing how enterprise software has evolved from tracking work to driving outcomes.
Georgia health officials offer car seat safety classes, free seats for eligible families
Georgia Department of Public Health officials are encouraging parents and caregivers to take advantage of car seat safety classes offered through local health departments.
Microsoft's new Outlook takes 10 seconds to do what Outlook Classic does instantly on Windows
New Outlook takes 10 seconds to show an email after clicking a Windows 11 notification. Outlook Classic does it instantly. Here's why.
Three-star receiver Anthony Williams commits to UNC
Three-star wide receiver Anthony Williams committed to North Carolina, marking the 11th pledge for the 2026 class.
Samsung's iPhone Ultra rival reportedly more crease-free than the Galaxy Z Fold8 Ultra thanks to thicker UTG
An industry report from South Korea suggests a significant difference between the more compact and wider Galaxy Z Fold 8 on the one hand, and the "Ultra" version of the classic foldable form factor on the other. According to the report, the wider iPhone Ultra competitor from South Korea appears to be significantly less prone to creases than the Galaxy Z Fold 8 Ultra.
Is SMIC N+3’s Metal Pitch Smaller than Intel 18A’s?
Almost four years ago, we published that SMIC had started shipping 7 nm (N+1) chips. Now, SMIC is shipping its third-generation 7 nm (N+3) process in Huawei’s Kirin 9030, with a minimum metal pitch of 32.5 nm, about 10% tighter than the 36 nm minimum metal pitch shipping in Intel’s latest Panther Lake CPUs on 18A. The headline is true, but incomplete cherry picked metric. N+3 reaches the density of TSMC N6 through aggressive DUV multi-patterning and design-technology co-optimization (DTCO), but it pays for that in complexity, efficiency and process control. We found this and more in our reverse engineering and teardown where we cover SMIC’s N3 process technology, Huawei’s packaging, memory, architecture, and more. SemiAnalysis has been building a state-of-the-art teardown lab in Oregon capable of analyzing the world’s most advanced and important chips over the last year and half. We have already generated revenue on advanced datacenter chip teardowns including our recent reverse engineering of a major TSMC customer’s COUPE CPO optical engine + EIC 3D stack. This is the first public report from the SemiAnalysis Teardown Engineering & Evaluation Lab, or STEEL for short. The lab is aggressively scaling up and out and we’re excited to announce it publicly. This is a bit of inconvenient timing for TechInsights as they are private equity owned and currently being sold while having enjoyed virtually no credible competition for decades. This has led to TechInsights underinvesting in CAPEX. SemiAnalysis exceeds TechInsights in revenue despite no venture or private equity ownership and being founded only 6 years ago. Because we have no external investors and are founder led, we move faster, build faster, and we can release client chip teardowns for free regularly, while focusing on datacenter for our major clients. Here’s the first public image from our lab, the HiSilicon Kirin 9030 Pro SoC: This report will detail our teardown of the Kirin 9030 and our findings on SMIC’s N+3 process, the most advanced in China. For comparison, we’ll show our teardown of the MediaTek Helio G99, made on TSMC N6. Through this comparison, we can look at the effect of export controls – SMIC N+3 and TSMC N6 are comparable nodes, but one is heavily export-controlled, the other free to use the West’s most advanced equipment. Here we see both China’s progress and constraints. SMIC N+3 reaches TSMC N6-class logic density, but it requires far more aggressive DUV multi-patterning, so it does not match N6 on process maturity or cost. The Kirin 9030 Pro performs similarly to three-year-old Android flagships, and trails far behind the current flagship SoCs from Apple, Qualcomm, MediaTek, and Samsung. The efficiency gap is even wider. Export controls have not stopped Huawei and SMIC from shipping advanced silicon, but they have forced a different path. Without EUV, SMIC is leaning harder on DUV multi-patterning, DTCO, and increasingly complex integration. The roadmap continues forward through tighter design rules and backside power, but each step adds cost and process risk. Huawei’s τ scaling and LogicFolding show another path: stacking active logic and recovering density through advanced packaging and system-technology co-optimization (STCO). To understand the Kirin 9030, we must first understand Huawei’s SoC history. HiSilicon is Huawei’s chip design arm, responsible for the Kirin smartphone SoCs, Kunpeng server CPUs, Ascend AI accelerators, and switch/router networking silicon. Before export controls, Huawei was TSMC’s largest customer – the only customer on TSMC’s first EUV node, N7+, and among the first on N5, alongside Apple. That ended in late 2020. Huawei switched to Qualcomm SoCs in its flagship smartphones, though export controls limited them to 4G-only variants. In late 2023, Huawei returned to in-house silicon with the Kirin 9000s, a successor to the Kirin 9000, fabricated on SMIC N+2 instead of TSMC N5. In the following years, they released the Kirin 9010 and 9020 on the same N+2 process. These chips used Huawei’s in-house TaiShan CPU cores and Maleoon GPU. We have not torn down a Kirin 9020 ourselves, so the predecessor die shot is from Kurnal. The die shots show how Huawei spent its silicon budget: which functional blocks are where, and how their areas compare to the predecessor. First, a quick guide to the major blocks on the die. The total die area is nearly identical, but the 9030 uses that area more aggressively. A denser process lets Huawei fit an extra middle CPU core, more GPU and NPU cores, and larger caches into the same footprint. In contrast, the Helio G99 is a much smaller, low-cost SoC, built for budget smartphones rather than a flagship device. While the Kirin 9030 is ~140 mm², the G99 is only ~29 mm², roughly one-fifth the area. The underlying TSMC process technology, however, is directly comparable as a baseline for analyzing SMIC’s. The Kirin 9030 is an evolutionary refresh, not a clean-sheet design. Its CPU, GPU and NPU cores carry over the 9020’s families, and the gains come from three levers: the SMIC N+2-to-N+3 process step, DTCO and floorplan work, and incremental microarchitecture. Area is where the first two show up, and the 9030 scales well here. Performance and efficiency are the harder test. Huawei’s design holds up better than its node would suggest, but the chip still trails, both because N+3 sits behind the leading-edge nodes and because its cores, while competent, remain a few generations behind the newest designs. The new prime core is an incremental update. The main changes are a 10% frequency increase from 2.5 GHz to 2.75 GHz and a doubling in the L2 cache from 1 MiB to 2 MiB. Despite the increased cache, the core size decreased by 7.6%. Excluding the private L2 cache, the core size decreased by 21%. This is a large reduction for an incremental node. Compared with the TaiShan New V120 core in the Kirin 9020, the Kirin 9030’s middle core is almost unchanged architecturally, yet each core shrinks by ~22%. Most of that comes from the move from N+2 to N+3, with layout likely accounting for the rest. Visually, the most noticeable change is the increase from 3 middle cores to 4. There is also a 20% increase in the shared L3 cache of the big cluster. This helps to improve multi-core performance without sacrificing much in terms of area. Even with each core shrinking, the big CPU cluster’s total area is essentially unchanged. The per-core savings went back into an additional middle core and larger caches. The tiny cores shrank less than the prime core (excluding its L2 cache) and less than the middle cores. This is likely because fixed overhead is a larger share on a small core. We cannot resolve any architectural changes from the die shot alone, but the per-clock and efficiency gains shown below point to more than pure process and layout scaling. The area reduction was offset by a doubling of the shared L2 cache from 2 MiB to 4 MiB, leaving the total tiny CPU cluster area slightly larger. Area is the easiest improvement to see from a die shot, but it is only one part of PPA (power, performance, area). For modern logic, power and performance matter just as much, and often more. Since Dennard scaling broke down in the mid-2000s, voltage and frequency have not scaled in step with transistor dimensions, so each node has had to fight harder for gains in performance and efficiency. The starkest comparison is not Kirin 9020 versus Kirin 9030 Pro. Apple’s efficiency cores run circles around Huawei’s prime core. Apple’s low-power core delivers 20% higher integer performance while drawing only 1 W, compared with 4.5 W for Huawei’s prime core. N+3 matches TSMC N6, but N6 is several generations old. Apple and Qualcomm build on N4 and N3P, which are denser and sit on a better voltage-frequency curve, giving them a larger transistor budget and more performance per watt. The 9030’s own cores did improve. The middle and tiny cores gained 17% and 14% in per-clock integer performance over the 9020, with floating-point flat on the middle core and up 11% on the tiny. The tiny core improves cleanly, with performance rising while power falls and efficiency increases by 45% in integer and 24% in floating point. The middle core is mixed: integer performance rises but power rises faster, cutting integer efficiency by 7%, while lower power lifts floating-point efficiency 16%. Per-clock gains at the same or lower frequency are microarchitectural, so the cores are tuned, not just shrunk. Both also failed to hold their rated maximum frequencies, pointing to thermal, power, or stability limits. Per clock, the middle core sits around Arm Cortex-A720 and the tiny core near the Cortex-A520; absolute performance trails because Huawei clocks them much lower. The prime core is roughly Cortex-X2 class per clock, a 2021 design. Apple’s 2020 M1 Firestorm core is still 35% higher per clock and 57% faster in absolute integer performance at a similar 4.5 W. The current leading edge is further ahead again: the Apple M5 P-core is 60% higher per clock and 2.7× faster, the Arm C1 Ultra 45% higher and 2× faster. Matching older high-end cores per clock is a genuine design achievement. What Huawei cannot match is the voltage-frequency curve and transistor budget of leading-edge nodes, which let Apple, Qualcomm and others spend more transistors in the same area on wider cores, larger caches and deeper buffers while running at lower voltage. Huawei’s LogicFolding roadmap is one answer, stacking active logic to recover density and shorten signal paths. We return to it later. The GPU compute units (CUs) changed more visibly than the CPU cores, moving to a more rectangular layout for both the arithmetic logic unit (ALU) clusters and the CU overall. Even with ray-tracing support added, a CU shrank ~28%. However, that shrink is offset by the increase from 4 to 6 CUs and the area outside the CUs grew 33%. Overall, the GPU cluster is larger by ~10%. The GPU is where Huawei makes its biggest gains. The Maleoon 935 is not competitive with current flagships, but it is a large step up from the 920 and reaches older-flagship territory. In 3DMark it is 70% faster in Wild Life Extreme (WLE) and 79% faster in Steel Nomad Light (SNL) than the 920; with 11% higher clocks and 50% more CUs, the ~67% theoretical uplift roughly matches WLE and is beaten by SNL. It edges ahead of the Snapdragon 8+ Gen 1 in WLE and SNL, and the Dimensity 9200 and Apple A16 in WLE, but stays far behind newer parts: the Snapdragon 8 Elite Gen 5 and Dimensity 9500 are ~2.4–2.6× faster in WLE and ~3.2× faster in SNL. The Maleoon 935 is Huawei’s first GPU with hardware-accelerated ray tracing; there it lands slightly ahead of the Exynos 2200, and on par with the Apple A16, with current flagships up to 3.7× faster. The Neural Processing Unit (NPU) saw the largest structural changes of any block, moving from a Lite and a Tiny core in the Kirin 9020 to a Lite and two Tiny cores in the Kirin 9030. Both core types also show significant layout changes. This is a reversal in Huawei’s NPU design. The Kirin 9000 5G, its last flagship chip on TSMC N5, used two Lite and one Tiny core. The series of SoCs on SMIC N+2 moved to one Lite and one Tiny core, likely for area savings. With the Kirin 9030, Huawei has shifted back toward a larger multi-core NPU cluster, but with the additional area going to a Tiny core rather than a Lite core. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Before diving into the process stack, the package and memory are worth separating from the SoC itself. The Pro variant of the Kirin 9030 carries 12 GB of Samsung DRAM, with two stacks of four dies each. The dies were identified as the K4L2E165YD, a 12 Gb LPDDR5X-9600 device fabricated on Samsung’s 1a node, the fourth generation of its 10 nm-class DRAM after 1x, 1y and 1z. 1a has shipped in volume since 2022, so this is current memory rather than older-node inventory. The 16 GB Pro Max variants we obtained were found with both CXMT and Samsung packages. The CXMT package is marked CXDD7JEDM, with two stacks of four dies, packaged in week 45 of 2025. The inferred die dimensions from X-ray computed tomography (CT) are consistent with a known density of ~0.3 Gib/mm² for the CXMT G4 process, roughly equivalent to other manufacturers’ 1z processes. The Kirin 9030 uses a typical integrated package-on-package (iPoP) stack: multiple DRAM dies in a memory package sit above an organic redistribution layer (RDL) interposer, which sits above the SoC and package substrate. The full package is then mounted to the printed circuit board (PCB) through ball-grid array (BGA) solder bumps. The memory package substrate is a thin bismaleimide-triazine (BT) laminate carrying the LPDDR5X stack. The organic RDL interposer over the SoC routes the PoP signals around the die and carries possible dummy thermal copper pillars. The package substrate, a thicker Ajinomoto Build-up Film (ABF) build-up over a BT core, fans the flip-chip bumps out to BGA pitch and embeds the power planes. The whole stack is organic. The only silicon is the SoC and the LPDDR5X dies; there is no silicon interposer. Keeping it all-organic brings the package’s coefficient of thermal expansion (CTE) close to the PCB’s, reducing board-level warpage, and avoids the cost of a silicon interposer the SoC’s bandwidth does not need. In an iPoP stack, the memory package connects to the organic RDL interposer through an array of solder bumps. Underfill fills the gap around those bumps, adding stiffness and protecting the joints from mechanical stress. The Pro and Pro Max variants differ here, which we cover behind the paywall. The die shot and architecture tell us how Huawei allocated its silicon budget. The process tells us what SMIC can manufacture. We use the Helio G99 as the process reference for TSMC N6. Both SMIC N+3 and TSMC N6 are evolutions of previous 7 nm-class nodes. We used targeted TEM cross-sections through logic and memory regions, imaged in both fin-cut and gate-cut directions. Each cross-section caption gives its horizontal field width (HFW), the real width of the imaged area. We start at the transistor fins, then move up through standard cells, local interconnect, and SRAM. SMIC has not overtaken Intel or TSMC. It uses aggressive DUV scaling and DTCO to reach N6-class density, but that density doesn’t translate into comparable performance and efficiency, for two reasons: the node gap to leading-edge nodes, and Huawei’s core designs. Fin Profile One of the most important knobs in a FinFET process is the fin profile: the shape of an individual fin and the channel where current passes from source to drain. The ideal fin is tall, narrow, and nearly vertical. A taller fin increases effective channel width, while a narrower fin improves electrostatic control by thinning the body the gate must control. Push either too far, and the process pays for it: weaker drive current, fragile fins, taper, footing and line-edge variation that hit yield and device variability. The Intel 22 nm, 14 nm, and 10 nm fin cross-sections show how FinFET nodes have improved over time. 22 nm fins were a first-generation structure, relatively short, wide and strongly tapered. The shape limits current density and reduces gate control uniformity across the height of the fin. At 14 nm and 10 nm, Intel pushed the fins taller and narrower while also making the sidewalls more vertical. Rather than shrinking the device, these changes increase the effective channel width per fin and improve electrostatic control. The trade-off is that taller fins at tighter pitches are much more difficult to manufacture. Now, let’s compare the Helio G99 on TSMC N6 with the Kirin 9030 on SMIC N+3. Both processes are in the same class, with fin pitch of 30-32 nm on N+3 and 34 nm in our N6 cross-section. The pitch for N6 is especially interesting as N7’s HD library is generally listed with a 33 nm fin pitch, and N6 did not shrink pitches directly. Its density gains came from DTCO instead of tighter pitches. The 34 nm pitch was stable across our sampled region and serves more as a comparison against the SMIC N+3 we have not investigated further. Pinning down N+3’s fin patterning scheme takes more than one core unit. The CPU cores show a dense ~32 nm pitch, with the pitch between N-P fin pairs alternating between 78 and 88 nm. Logic alone may be consistent with dual-pitch mandrels of 120 and 110 nm, but this is a complex and unusual approach. Combining the pitch from the the 8T SRAM, which has more complex repeat unit, with the CPU core sequence allows us to reverse engineer the patterning steps with more confidence. As both the logic and SRAM should share the same base grid, a single CD mandrel lithography pattern with 128 nm pitch undergoing SAQP produces a die-wide ~32 nm grid (128 nm/4), which supports the pitch sequencing seen in both logic and SRAM cells. In the sampled cross-sections, N+3 shows a taller, narrower, higher-aspect-ratio fin than N6. The measured fin aspect ratio is ~9.5:1 on N+3 versus 7.8:1 on N6. N+3 also shows less top rounding, with an estimated radius of ~2 nm, compared with 2.8 nm on N6. Even though the fin widths differ, the ratio of top rounding to fin width tells the same story, with N+3 at 0.37 and N6 at 0.44. In a geometric sense, lower is better; a perfectly rectangular fin would have no top-rounding penalty. These are single-digit-nanometer features measured from a handful of cuts, so treat the absolute numbers as approximate. The important result is the relative gap: N+3’s fins are consistently taller, narrower and less rounded than N6’s. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Standard Cell A standard cell is the basic building block of chip layout: a fixed-height row pairing one NMOS and one PMOS transistor that share a gate, tiled in a grid to build logic blocks. The key dimensions are contacted gate pitch (CGP), cell height (CH), fin count, and the lower-metal routing grid. To measure density, we use the Bohr metric: a weighted average of NAND2 gate area (60%) and scan flip-flop area (40%). This represents a realistic mix of combinational and sequential logic. This metric has its limitations, especially for complex cell layouts like TSMC’s FinFLEX, which alternates cells with different fin counts. Even so, it is the best metric for a pure process-level comparison. Another important measurement is the fin pitch; it refers to the distance between two fins of the same transistor. In a FinFET process, multiple fins are used in each transistor to increase the drive current and thus performance. TSMC N6 ships both a high-density (HD) library with 2 PMOS and 2 NMOS fins per cell, and a high-performance (HP) library with 3 of each. More fins under the shared gate mean more effective channel width. HP cells switch harder at the cost of area. Designers mix the two on a die, primarily spending HP cells on timing-critical paths, and matching their PPA targets. In the Cortex-A55 core of the Helio G99, we found a cell height of 240 nm for the HD cell. MediaTek has used HD cells in the G99 to minimize die size and thus cost. As an SoC for budget smartphones at ~$100, this is essential. By contrast, we found only one library in the Kirin 9030, with 2 NMOS and 2 PMOS fins. This suggests a narrower library strategy than TSMC N6, where both HD and HP libraries are widely used. This likely reflects the smaller customer base and the more constrained domestic design and electronic design automation (EDA) ecosystem. In all three CPU cores of the Kirin 9030, we found cell heights of 228 nm, 5% smaller than on N6. This is also a reduction of 9.5% over SMIC N+2’s cell height of 252 nm. SMIC N+3 and TSMC N6’s HD library both feature a CGP of 57 nm. For SMIC, this is a 9.5% shrink over N+2. In the past, CGP and cell height alone may have been enough to compare transistor density. Now, however, we must consider scaling boosters and DTCO as well. SMIC’s density gain does not come from EUV. It comes from using every available DTCO booster aggressively. First is fin depopulation: reducing the number of NMOS and PMOS fins in each cell. The first FinFET nodes started with 3 or 4 fins for each transistor. SMIC N+3 and TSMC N6 HD both use only 2 fins per transistor, trading drive strength for density. Next is contact over active gate (COAG). By landing the gate contact directly over the active gate, instead of out over the isolation region, the cell height drops. N+3 integrates COAG while N6 does not. Our N+3 gate-cut cross-sections indicate COAG, with the gate contact sitting over the active region, while N6 shows an off-gate contact. Last is single diffusion break (SDB). Diffusion breaks are inserted between cells in the same row to provide electrical isolation, but they also introduce local layout effects (LLE), layout-dependent shifts in electrical characteristics. In the past, a double diffusion break was used, consuming the space of two CGPs. SMIC N+3 and TSMC N6 instead use SDB, saving area but increasing LLE sensitivity. This must be controlled at the process level and accurately modeled in the process design kit (PDK) so that EDA tools can account for it. Overall, SMIC N+3 has a transistor density of 113.4 MTr/mm², slightly above TSMC N6 at 107.7 MTr/mm². Even without EUV, SMIC has achieved density beyond TSMC’s mature N6 node which utilizes EUV. Metal Stack The smallest critical dimension in the teardown is M0; SMIC N+3 uses a 32.5 nm local metal pitch. That is smaller than the 36 nm M0 pitch on Intel 18A in Panther Lake. However, this does not mean that SMIC has a better process than Intel 18A or TSMC N3P. M0 is a local intra-cell routing layer. Its usefulness depends on the full interconnect stack: M1 and M2 pitch, track count, via and line resistance, design rules, mask count, overlay control, and routing flexibility. The 32.5 nm M0 is consistent with self-aligned quadruple patterning (SAQP), whose four-population line-width loading we read coarsely as alternating widths of 21.5 to 24 nm; M1 and M2, at 38 and 40 nm, are consistent with self-aligned double patterning (SADP), a single A/B split. On TSMC N6, M0, M2, and M3 sit at a relaxed ~40 nm and are consistent with SADP-class double patterning, with no need for quadruple patterning. That said, we measure M2 for example at ~43 nm, likely inflated by sparse routing. We do not assign any specific layer to EUV from our cross-sections; the distinction we can draw is double versus quadruple patterning, not lithography wavelength. Transistor-level density in the front-end-of-line (FEOL) sets an upper bound, but the design is ultimately limited by what the interconnect stack can route. The lowest metals are the most important for standard-cell density, but the semi-global and global layers determine how usable that density is at the block and chip level. Two axes are commonly used for chip cross-sections: the fin-cut and the gate-cut. The micrograph above is a fin-cut and shows metals 0 through 3. This axis lets us see the even-numbered metals, with M0 right above the fins. There are two kinds of M0 lines. The first are the power rails; these are wide wires for the VDD and VSS running horizontally at the top and bottom edges of each standard cell. The wide wires measure 55 nm across, more than double the other M0 lines. Their width minimizes resistance and reduces IR drop. The second kind are intra-cell wires, short segments within the cell that connect terminals to M1. These have alternating widths between 21.5 and 24 nm. The M0 pitch is 32.5 nm, a 19% reduction versus N+2 and N6. At this pitch, DUV patterning requires more aggressive multi-patterning, increasing mask count, overlay sensitivity, process complexity and cost. M0 is below what a single DUV-defined spacer (SADP) can resolve, so SMIC cascades a second spacer step (SAQP). The cross-section reflects the cost: the M0 trenches are visibly more re-entrant (narrower at the bottom than the top) than M1 or M2 on the same chip and carry a bright barrier-rich foot where the trench meets the etch-stop layer. That shape is partly the intended damascene profile, as a slightly narrow bottom helps void-free copper fill, but its magnitude at M0 is driven by the tight pitch and the higher trench aspect ratio. Intel 18A supports an M0 pitch of 32 nm, although Panther Lake has only shipped with a looser 36 nm pitch. This is due to Intel’s heavy usage of HP libraries. Among leading-edge nodes, 18A has the loosest M0 pitches due to PowerVia. With power routing moving to the backside, congestion is reduced, and the entire front-side metal stack can be used for signal routing. M2 is the first true inter-cell routing layer. It runs horizontally like M0 but spans across multiple cells to carry block-level signals. The M2 pitch sets the cell’s track height – the number of M2 tracks that fit between the VDD and VSS rails, defining what the library calls a 6-track or 7.5-track cell. This layer is the most important, limiting the routing of entire blocks. SMIC N+3 features a 5.7-track cell. The M2 pitch is 40 nm, a 5% decrease over N+2 and the same as N6. This shrink keeps the pitch at the edge of what is possible with double patterning. Future nodes will need to increase the number of masks for M2 as reducing the number of tracks is much harder due to the limitations in routing. The micrograph above is in the perpendicular direction, the gate-cut, and shows metals 0 through 4. This allows us to see and measure the odd-numbered vertical metal layers. The M1 pitch is 38 nm, 9.5% less than N+2 and 33% less than N6. The M1-to-gate ratio matters because it sets local routing flexibility. N+2 and N+3 use a 3:2 ratio, while N6 uses a 1:1 ratio, explaining the huge differences in M1 pitch. The more M1 lines there are compared with the gates, the more flexibility there is for power and signal crossing within the cell. Routing flexibility enables more complex and better cells. Clean fractional ratios are also preferred as a grid is periodic and improves layouts. The 3:2 ratio gives SMIC more local routing flexibility than a strict 1:1 grid, but it also complicates layout and patterning. This is a DTCO choice, with SMIC increasing process complexity to recover density and routability without EUV. This 3:2 ratio is not very popular in the leading-edge nodes. TSMC has only used it on N7+, the N5 family, and the short-lived N3(B). They have switched back to a 1:1 ratio for N3E. Intel has only used it on the 10 nm/Intel 7 family, with Intel 4, 3 and 18A all using a 1:1 ratio. Samsung is the only one still using a 3:2 ratio at the leading edge, using it in the SF4 and SF3 families. It remains to be seen if SMIC will remain at a 3:2 ratio or move to a 1:1 ratio with its future nodes. The industry is still actively exploring these local-routing ratios. At VLSI 2026, imec will be presenting work on even higher ratios, including a 2:1 scheme that can reduce area by up to 14%. We will be covering the conference in a future newsletter article. Subscribe We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. The final local interconnect layer for N+3 is M3, with a pitch of 44 nm. The M3 pitch is the same as on N+2 and 10% larger than on N6. The semi-global layers carry the majority of block-level signal routing. They have a coarser pitch than the lower local layers. On leading-edge nodes, they are designed to sit at the limit of DUV single patterning. M4 through M11 pitches were found divided between 80–82 nm (M4–M6), 128 nm (M7–M10), and 148 nm (M11). Given limited sampling, it is possible these are divided further in dense routing areas. At the top are two giant metal layers, M12 and M13. These have kept the same pitches as N+2 at 1920 nm and 4600 nm respectively. While the lower layers’ pitches are generally fixed by the process and library, the upper layers vary much more in pitch and count, depending on the design. Even two smartphone SoCs on the same process can have wildly different metal stacks. The Helio G99 carries fewer routing layers, reaching coarse metal pitches of 850 nm by M9, while the larger and higher-performance Kirin 9030 keeps fine pitches until M11. SRAM At the leading edge, SRAM is much more difficult to scale than logic. TSMC’s latest nodes have seen little to no bitcell scaling, while logic still has more DTCO levers to pull. While looking for other logic libraries in the GPU compute units, we stumbled upon the SRAM. The most common type of SRAM has 6 transistors (6T), but this cell had 8 transistors (8T) instead. 8T SRAM adds two transistors to form a dedicated read port. Unlike a 6T cell, where reading disturbs the storage, the decoupled read port removes read-disturb, improving read stability and letting the cell be pushed harder for performance. At first glance, the cut looked like an unusual logic library, with each cell row having 3 fins of one polarity and 5 fins of another. The rows also alternated in orientation. Energy-dispersive X-ray spectroscopy (EDS) resolved our confusion. The cut had not landed on the GPU logic, but on the SRAM macro beside it. The unusual fin pattern was due to the SRAM library. We return to EDS in the process flow analysis behind the paywall. SRAM libraries are not like traditional logic libraries. Due to the unequal number of PMOS and NMOS transistors, they require specialized rules and layout libraries. They do not need the flexibility of logic libraries, so they are hyper-optimized for one purpose: dense, reliable memory. The SRAM cell we found is a 1:2:2-2:2 cell. This means there is 1 fin per pull-up (PU) PMOS transistor, and 2 fins per pull-down (PD) and pass-gate (PG) NMOS transistor. These 2 PU, 2 PD and 2 PG transistors would usually form a single 6T high-current cell (HCC). An 8T HCC adds a read-pull-down (RPD) and a read-pass-gate (RPG) NMOS transistor, each with two fins. We measured a cell height of 406 nm, which brings the bitcell size to 0.0463 µm². That is a theoretical peak density of 21.6 Mib/mm². We estimate that a 6T HCC would have a cell height of 292 nm and a size of 0.0337 µm². This is ~12% larger than a 6T HCC on Intel 3 and 4. We also estimate the 6T high-density cell (HDC) to have a cell height of 228 nm and a size of 0.0260 µm². This is coincidentally the same as the logic standard-cell height measured earlier. The estimate puts the cell near Samsung 7LPP/5LPP and slightly below TSMC N7/N6. That is a theoretical peak density of 38.5 Mib/mm². 6T HDC is arguably the most important cell as it is used for the largest caches in a chip, the L3 caches and system-level cache (SLC). Both the Kirin 9020 and 9030 have split the SLC into 4 banks to raise total SLC bandwidth. In the Kirin 9030, the SLC increased from 2 MiB to 3 MiB per bank. Correspondingly, the number of arrays within the bank also increased by 50%, from 16 to 24. Each array can store 128 KiB and forms an orderly pattern on the die shot. From the Kirin 9020 to the Kirin 9030, the area of a 128 KiB SLC array decreased from 0.0477 mm² to 0.0392 mm², an 18% shrink. The achieved density is 25.5 Mib/mm², 66% of the theoretical maximum. While the SLC was quite similar across both chips, the L3 has seen some major changes, particularly in terms of its layout. The total capacity also went up from 10 MiB to 12 MiB. Much like the SLC, the L3 is also split into 4 banks. In the Kirin 9020, an L3 bank consisted of 16× 128 KiB arrays and 16× 32 KiB arrays. However, an L3 bank in the Kirin 9030 instead consists of 48× 64 KiB arrays. In the Kirin 9020 L3, a 128 KiB array was 0.0513 mm² and a 32 KiB array was 0.0154 mm². The size of the 128 KiB array is different on the L3 and SLC as the assist circuitry for the two arrays differs depending on their purpose. In the Kirin 9030 L3, a 64 KiB array is 0.0210 mm². Although not a like-for-like comparison, normalized for capacity, it is 18% smaller than the 9020’s 128 KiB L3 array and 31% smaller than its 32 KiB L3 array. The achieved density is slightly lower than the SLC, at 23.8 Mib/mm², 62% of the theoretical maximum. Unlike the L3 and SLC, the prime cores’ private L2 cache uses a 2-bank design. As the prime cores’ L2 is latency-critical, it likely uses 6T HCC instead of 6T HDC. The 9020 has 16 arrays in each bank while the 9030 has 32. Each array has a capacity of 32 KiB. A 32 KiB array in the L2 shrank from 0.0171 mm² to 0.0142 mm², ~17% smaller. The density is 17.6 Mib/mm², ~59% of the theoretical maximum for 6T HCC. SRAM scaled well from N+2 to N+3, shrinking by ~19%, close to the theoretical logic shrink. The caveat is that N+2’s bitcells were unusually large, bigger than comparable 7 nm-class nodes, so part of the gain is catch-up rather than true scaling. With the insights from STEEL’s teardowns, we will be doing a deep dive into SRAM in a future newsletter article. Subscribe Everything above came out of a single STEEL teardown: die annotation, block-level area analysis and TEM cross-sections through logic and SRAM. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Future Roadmap The same cross-sections that pin down N+3 also show where SMIC can go next. Although N+3 is already close to the practical limits of DUV multi-patterning in several layers, SMIC still has a few scaling levers left. A theoretical N+4 would likely start with cell height. N+3 uses 5 M0 tracks between its power rails. Moving to 4 M0 tracks, as on SMIC N+2 and TSMC N6, could reduce cell height by roughly 15%. The routing grid is only one side of the shrink; the front end also must fit into the smaller cell. One possible FEOL lever is reducing the p-to-n isolation spacing from two diffusion grid units to one. Intel used this scaling booster on Intel 4, and TSMC did so on its N3 family. This path trades layout flexibility for density. Fewer M0 tracks reduce local routing resources, while tighter p-to-n spacing raises integration and design-rule difficulty. M2 is also constrained by the cell height shrink. For SMIC to maintain a ~5.7-track cell, M2 would need to move toward ~35 nm. That would move another layer into SAQP territory. SMIC could also reduce the CGP from 57 nm to 54 nm. Intel reached a similar CGP on Intel 10 nm/Intel 7 without EUV. The local interconnect is also tougher. If SMIC keeps the 3:2 M1-to-gate ratio, M1 would need to shrink to 36 nm and would likely require SAQP as well. If SMIC moves to a 1:1 ratio, M1 could relax to 54 nm, but it would give up routing flexibility. Under this theoretical path, we estimate that SMIC N+4 could reach a cell height of 198 nm and a CGP of 54 nm, implying a Bohr density of 137.8 MTr/mm², on par with TSMC N5 or Samsung SF4. However, the difficulty is cumulative. Each step is individually plausible, but together they make N+4 harder than the transition from N+2 to N+3. It will likely take longer, cost more, and carry less process margin. A theoretical N+5 would require a larger integration shift. One possible path is backside contacts (BSCon), moving power routing and source/drain contacts to the backside, which would reduce front-side routing pressure and enable another reduction in cell height. The front-side metal pitches could relax to reduce the process complexity. M0 would likely relax slightly to ~34 nm, and M2 and M4 pitches could relax further. CGP is unlikely to shrink much further. Even with EUV, 48 nm has been the practical limit for yield and process control. This approach would allow N+5’s cell height to fall to 170 nm and its CGP to 53 nm. This implies a Bohr density of 163.6 MTr/mm², on par with Intel 18A’s HP library. However, this would not make N+5 cost-competitive with the leading edge. It would reach a similar density through a much more expensive route. The integration difficulty rises sharply, with new process flows for backside alignment, wafer thinning, contact reveal, and backside metallization. Past this point, standard density and interconnect scaling become increasingly unattractive. That is where Huawei’s roadmap stops looking like a normal foundry roadmap and starts looking like a packaging roadmap. At ISCAS 2026, Huawei unveiled its tau (τ) scaling law, reframing process scaling in the time domain. τ is the time cost of data movement and processing: switching delays in transistors, RC signal propagation delays in circuits, compute, memory, and networking latency. Outside Huawei’s terminology, this is called system-technology co-optimization. This is Huawei’s answer to its lack of EUV lithography. Without EUV, planar density cannot keep pace with TSMC, Intel, or Samsung. If transistor density cannot shrink further, Huawei’s alternative is to shorten wires, reduce buffering, and stack logic vertically. “LogicFolding”, Huawei’s implementation of this new scaling idea, is, in practice, an aggressive 3D stacking approach. AMD V-Cache places SRAM above or below a CPU die. AMD’s MI350X places active interposer dies (AIDs) underneath accelerator and compute dies (XCDs), with the AIDs handling cache, IO interfaces, the network-on-chip (NoC) and embedded metal-insulator-metal (MIM) capacitors. With LogicFolding, parts of the same logic block are split across multiple active dies bonded face-to-face at ultra-fine pitch. This allows Huawei to shorten some critical paths and reduce buffer overhead, not merely add cache capacity or offload the IO and interconnect. Shortening wires is where the higher clocks come from. A large share of a modern core’s delay and energy budget goes into driving long interconnects and the repeater buffers along them. LogicFolding distributes a block’s critical-path gates across multiple stacked tiers bonded at a very fine pitch, so the bond interface behaves like an additional metal layer and the longest paths get shorter. That is how Huawei expects to recover frequency and efficiency it cannot get from the process alone. Huawei’s roadmap shows its intent. Prime core frequency is targeted to rise from 2.75 GHz in the Kirin 9030 to roughly 5 GHz by 2031, far beyond what planar scaling alone could deliver. Prime cores with 3.1 and 3.39 GHz clocks are being tested in its labs, although their power consumption is unknown. Beyond that, chips are in the design, simulation or pathfinding phase, meaning the frequencies are targets. However, the direction matters more: LogicFolding also helps with performance, not just density. The catch is that Huawei’s density claim is not directly comparable to foundry densities. A stacked design can report more transistors per package footprint by adding active layers, even if each patterned die remains well behind TSMC or Intel in front-end density. This is how Huawei can claim to reach foundry 14A-equivalent density by 2031. This is not a like-for-like foundry comparison, with Huawei using stacked logic and measuring density per package footprint. On a normalized Bohr-density basis, SMIC N+3 is ~114 MTr/mm², 38% less than Intel 18A’s HD library. Huawei’s 3D roadmap closes the gap by stacking active logic, reaching 215 MTr/mm² by 2030. In 2031, the roadmap density jumps to 295 MTr/mm², implying either a third active layer, partial EUV insertion or aggressive planar DUV scaling. Huawei’s methodology makes other foundries look much denser as well. Applying it to AMD’s MI450X with an N2 top die on an N3P base die yields a theoretical density of 460.2 MTr/mm² in 2026, compared with Huawei’s 295 MTr/mm² in 2031. This Kirin 9030 does not use LogicFolding, remaining in a conventional mobile SoC package. Instead, it forms the baseline for how far Huawei and SMIC can push planar scaling. Future teardowns of Kirin and Ascend chips will show both planar logic density and Huawei’s hybrid bonding solutions. Export controls changed China’s optimization problem rather than ending it. EUV restrictions raised the cost and complexity of leading-edge manufacturing without freezing it. SMIC reaches N6-class logic density through DUV immersion, SAQP and DTCO, while Huawei shifts more of the burden onto architecture, packaging and system-level integration. Future nodes will be tougher. N+3 still had room to tighten local metals and reduce cell height and CGP. Further scaling without EUV leaves fewer levers. More aggressive multi-patterning adds masks and overlay error. SMIC can keep pushing DUV, but each step will get more expensive and less forgiving. The design side is just as critical. Huawei had domestic EDA tools and flows before the Kirin 9030, with the Kirin 9000s, 9010 and 9020 making that clear. Huawei was able to ship multiple consumer SoCs on SMIC N+2 and N+3 while cut off from the Western EDA stack. US export controls restricted EDA tools for advanced chips in 2022 but did not target tools for more mature chips. In 2025, the US government briefly placed much broader restrictions on EDA software from Synopsys, Cadence, and others, before lifting them less than two months later as part of a trade deal tied to rare earths. Huawei has been unable to access those tools because it remains on a US trade blacklist. That forced Huawei, SMIC and Chinese academic institutions to build their own tools and flows. Researchers at Peking University recently announced a prototype EDA tool for Huawei’s LogicFolding architecture, which requires a new flow to handle the multilayer layout and floorplan. This is not the same as replacing the full Synopsys or Cadence stack, but it shows where domestic EDA is headed: toward tighter co-optimization between architecture, process and packaging. These advances are also diffusing into the Chinese ecosystem. SMIC is licensing its N+2 and N+3 processes to HLMC/Hua Hong at the government’s direction rather than by choice. If the same process learning feeds into Ascend accelerators for AI training and inference, the choke point shifts from one named fab to an ecosystem. Alibaba’s T-Head silicon arm and Cambricon, a Chinese AI chip designer that is expected to supply ByteDance, could also be major beneficiaries. Sanctions aimed at SMIC alone become less effective once the manufacturing knowledge has spread to other fabs and design houses. China is not closing the gap with Intel, Samsung and TSMC. The teardown shows the opposite in several places: no EUV, no backside power, higher process complexity, and visible trade-offs. But China is still advancing. If domestic chips become good enough for phones, inference, networking and security-sensitive workloads, they can matter strategically without matching TSMC at the leading edge. Behind the paywall, we show what else STEEL can do, with material and process flow analysis of SMIC N+3, and analysis of the Kirin 9030 package. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline, access the full Kirin 9030 and SMIC N+3 analysis or to commission a custom teardown, contact sales@semianalysis.com.
Badgers land 7 footer after visit and offer
The Badgers have a big man commit in the 2027 class.
Victor Wembanyama Accused Of 'Classless' Reaction To NBA Finals Loss
Victor Wembanyama and the San Antonio Spurs fell in five on Saturday night. San Antonio blew a double-digit lead to New York, as the Knicks topped the Spurs, 4-1, in the 2026 NBA Finals. Jalen Brunson, Josh Hart, OG Anunoboy, Karl-Anthony Towns and the rest of the Knicks are NBA champions. ...
‘The Cardinal Countdown: 84 Days Until Kickoff’
PAYTON COOK #84 Height: 6’1” Weight: 190lb Position: WR Class: Freshman Hometown: Akron, OH Summary: Brohm and staff wanted to go secure some weapons in the high school ranks in 2026, and Cook was high on the list of bolstering up the arsenal. A near consensus four star player, Cook chose the Cards over Miami, […]
Bran flakes could be classed as junk food under new guidelines to promote healthy eating
UK government wants to update nutrition rules to include naturally occurring ‘free sugars’ when determining what is unhealthy
FDA issues highest-risk recall for Alfredo sauce sold in 41 states
The FDA elevated a recall of Alfredo sauce distributed across 41 states to a Class I event, citing the risk of Salmonella contamination tied to dry milk powder.
Georgia Bulldogs flip 4-star OT from SEC rival
The Georgia Bulldogs have successfully flipped 4-star OT Kennedee Jackson from the Florida Gators in the 2027 class.
Fort Smith Metro News Briefs: ArcBest goes electric, Baptist Health nurse receives national award
Following are recent news brief items from the Fort Smith metro. ArcBest Tesla Trucks Fort Smith-based ArcBest, through its ABF Freight subsidiary, has purchased to Class 8 Tesla semi trucks....
Tomb Raider's new star reveals her 'classic' and 'unapologetic' approach to Lara Croft
Alex Wilton Regan wants to bring out Lara Croft's confident side again
Donovan McNabb Jr commits to UNLV: Dan Mullen secures pledge from son of six-time Pro Bowler
The younger McNabb joins the Mountain West's No. 1-ranked recruiting class in the 2027 cycle, according to 247Sports
📸 This week’s kit news 👕
As every week, here’s a look back at the kits that were unveiled. From reliable French classics to Portuguese gems, here’s the news you definitely don’t want to miss.Olympique Lyonnais and OL Ly...
Trump Is Losing Ground With White Working-Class Voters on the Economy
A review of polling data shows an extraordinary swing among white working-class voters on the president’s handling of the economy.
In Retrospect: Poland, Russia, Europe
In April I spent a few days with Zryw, a Polish non-profit organization that recruits young people to enter politics and public life. Their aim is to build a new generation of civic leaders in Poland. I’ve followed their evolution from the beginning; my son is one of the founders. (“Zryw” means “impulse” or “burst of speed” in Polish). Julie Chmielewska, one of Zryw’s leaders, interviewed me at the event. Here is the conversation, lightly edited for grammar and context: Julia Chmielewska: Assuming that culture shapes institutions, could we conclude that some cultures are more prone to authoritarianism? Anne Applebaum: I don’t think so. Every culture, every nation, and every country has the potential for change. When we look at history, we can see that nations do change. Poland has changed, for example, from the 1980s to today. There’s a completely different mentality here than the one I encountered when I first visited, in 1988. The current generation sees the world through a different frame. So no, I don’t believe that certain nations are doomed to authoritarianism, or to anything. Of course, there are political and cultural traditions, but they can always be challenged. JC: So do you think there’s something intrinsic in human nature that pushes people to democracy, freedom? AA: I think there is something in human nature, a deep instinct, that pushes people towards freedom, yes. People who live in authoritarian countries – and I’ve heard this from them over and over again – sooner or later find themselves angered by a feeling of helplessness. They can see the unfairness of crooked courts, irrational political decisions. They naturally dislike the fact that somebody has all the power while they have none. In those circumstances, people who have no political background at all sometimes are politicized just by that frustration. I’m thinking of Svetlana Tikhanovskaya, for example, who was a Belarusian housewife, until the circumstances of her husband’s arrest forced her to become a politician. I met a woman who is a Uyghur from China, and who had come to live in Turkey. After several of her family members were arrested, she too was propelled into a political role. These kinds of experiences make people interested in democracy or political reform, even if they thought they didn’t care. I also think that the opposite is true: some people instinctively prefer homogeneity, order, hierarchy. They don’t like the confrontation of opinions or the noise of debate, and they lean towards a single leader or a unified regime. I think that most of modern history is shaped by the clash between those two different sides of human nature. JC: Which force do you find more powerful today? AA: I think they both have a lot of power and there’s no way of predicting who wins. Even in countries that seem very shut off or stuck in an authoritarian system can change. We’ve seen that happen. And vice versa, I think democracies can also begin to fail and slide into authoritarianism. So it’s very important not to be complacent in either direction. JC: I want to go into your history and your experiences. You’ve lived in Russia during a time of incredible change in the late 80s, and then you came back to do research in post-Soviet Russia. AA: I was a student in Russia just before the collapse of the Soviet Union. I then traveled and worked there extensively in the 1990s, and I met people who really were full of hope. They hoped that Russia could become a democracy, or at least a place that guaranteed freedom of speech, freedom of the press. These weren’t ideas that came from Washington. Although now the narrative in the Kremlin is different, I met many people who were working towards exactly that kind of transformation. A friend of mine ran a series of seminars – once a year, and then later several times a year, in cities all over Russia – designed to get people to discuss politics in new ways. She invited young politicians and journalists, as well as foreigners. I went to many of them, in Moscow as well as Volgograd and Novosibirsk. Over two decades, hundreds of people came to these seminars, and all of them wanted Russia to be different. I remain convinced that many Russians still want Russia to be different. It’s just that the old system, in the form of Putin, a representative of that system, returned. The KGB reimposed their power. And this wasn’t because of something to do with culture, this was to do with money and politics, and who was in charge. JC: You’ve partially answered my question... I wanted to ask whether that excitement of the 1990s was an exception from the Russian historical norm which has been rather authoritarian? AA: Of course, if you look at the history of Russia since the 18th century, there have always been liberal groups, reformers and revolutionaries. There were the Decembrists, in the early 19th century, and the rural populists later on, who tried to organize the peasantry. A significant group of liberal Russians appeared at the turn of the 20th century, people like the father of the writer Vladimir Nabokov, who was a Russian politician before the revolution. These groups were small in number, but sometimes had a broader significance. The Russian dissident movement in the 1950s and 1960s actually invented the modern human rights movement. It was their idea to hold the leaders of the Soviet Union accountable for the language they used, to remind them of the treaties they had signed and the promised they had made. They created the Helsinki group, for example, that held Soviet leadership to the language of the Helsinki Treaty, which formally ended the Second World War and which contained guarantees of human rights, at least on paper. That idea spread to Eastern Europe, and similar tactics were used here in Poland. (Benjamin Nathans recently wrote a great book about the Soviet dissidents, To the Success of Our Hopeless Cause) JC: But seemingly, even if they do ever get power, they could never hold on to it. AA: We don’t know, because they have never really had power. But in any case, we also don’t know what will happen in the future. There is no reason to assume that Russia will forever be condemned to totalitarianism. Even during the first fifteen years of Putin’s regime there was some form of democratic politics. Only when the full-scale war began did he bring everything to an end: he shut down all remaining independent organizations and killed his most important opponent, Alexi Navalny. But does that mean he is popular, that he enjoys legitimacy? Even now, we don’t really know what Russians think about him, or about the war. There is no way of doing real polling in Russia because nobody will answer an independent pollster over the phone. JC: Do you think that the flock of young people, especially young men, who fled Russia after the start of the war represent a continuation of liberal movements that refuse to partake in the authoritarian state, or do you think they are moving for the sake of self-preservation – “I don’t want to go to the army, so I leave”? AA: I’m sure it’s both. I actually know many people who left Russia for political reasons either in the very last years before the war, or else just after the war began. JC: And do you see a change in the young generation versus the old one that have fled? AA: It’s hard for me to say because the people who I know were mostly already politicized. I do know some younger people who left, but most of them were already either active in the opposition, or working as journalists. Many of them very self-consciously think of themselves as maintaining Russian culture abroad, just as in the 20th century the Soviet dissidents or the anti-communist White Russians once thought of themselves as people who maintained the true Russian culture, outside of Bolshevik Russia. JC: Let’s move on to Poland. One of your first experiences with Poland was reporting on Margaret Thatcher’s first state visit, in the autumn of 1988. You followed her around the farmers’ market. AA: She was making a symbolic gesture. She wanted to welcome free markets, but the only one she could really visit was the farmers’ market at Hala Mirowska. JC: And I want to talk about this area because today you can look out of any window in that district, Mirów, and see rows and rows of skyscrapers. How does it feel to see a country built from the ground in such a short time, both politically and economically? AA: You know, when you’re living in a period of dramatic change, it’s always hard to know whether the change is positive or negative. The transformation in Poland created winners and losers, as well as new classes of people, new political movements of different kinds. At the time, it sometimes just felt like turbulence. Now, we can look back at the 1990s and early 2000s in Poland and see in retrospect that the country was headed in towards prosperity and European integration. In around 2009 or 2010, I remember speaking to a woman who worked cleaning government offices, and who asked me if her daughter should study in Amsterdam or in London. This seemed to me to be a real transformation, and it happened very fast: within a few years, Poles stopped feeling like second-class Europeans, and a generation of younger Poles appeared who had no qualms about crossing borders. JC: We again live in turbulent times. Do you think we’re heading towards positive outcomes? AA: I can’t make predictions, because everything that happens tomorrow depends on what people do today. Also, history doesn’t have a trajectory. It doesn’t move in a particular direction. You only think it does afterwards. As I said, you can look afterwards at Poland in the 1990s and you could say this was a period of great progress. But not everybody at the time saw that. Sometimes people are very wrong about a given country’s trajectory. I remember people writing about Ukraine in the 1990s, about how dangerous it was that Ukraine was independent, that this was going to be an anti-semitic state, that Ukrainian nationalism was going to come back... and although you can say many bad things about Ukraine, the country made many bad choices, actually it became a pretty tolerant state which now has a Jewish president and until recently a Muslim defense minister. JC: In the 1990s Poland’s and Ukraine’s GDP were roughly similar. Ukraine was even a bit richer. So the starting point was similar for both of these countries, but they’ve turned out very, very differently. Even if we stop in 2014. Why do you think Ukraine “chose East”? Was it external influence? AA: No, I think Ukraine was in a different position. First of all, central and eastern Ukraine had been part of the Soviet Union since the 1920s, and had therefore experienced a longer period of occupation, repression, Sovietization and even Russification. Ukraine did not have, as Poland did, an alternative elite: a large cadre of economists and politicians, who already had some experience in opposition politics and in independent thinking. In Poland, the transformative finance minister, Leszek Balcerowicz, had already thought about how an economy might be decentralized before he took office. We can argue about how successful he was, but at least he was prepared to try something new. In Ukraine, people weren’t prepared. For one, there hadn’t been much space even for an illegal opposition in the previous couple of decades. Ukraine was also in many ways still emerging from colonial occupation. For the previous couple of centuries, many of the most capable Ukrainians had moved to Russia, and the first generation of leaders in independent Ukraine tended to be former Soviet apparatchiks. They didn’t immediately seek to become closer to western Europe. Instead, they looked for some kind of economic and political “third way” and an accomodation with Russia. Ukraine became stuck in this position, half-in, half-out and became pretty profoundly corrupt. JC: The Polish alternative elite had a vision of where they wanted the country to go. I think the general perception now is that this vision ends with the next election, right? Is this a natural process of gaining power? AA: Their vision, and it was shared by the time by politicians who now call themselves both left and right, was that Poland should join the EU and NATO, as fast as possible. My husband (Radek Sikorski) was in the very first government that said it wanted to join NATO. At the time this was taken very badly in Washington: the demand for NATO membership absolutely came from Poland, not from the US. But even then, in the early 1990s, many Poles already understood that the Russian sphere of influence would grow once again, that it was important to become part of the transatlantic alliance and an integrated Europe as fast as possible: NATO, the EU, the Council of Europe, all of the trading and security alliances. That consensus lasted through several different governments and over many years, even governments containing former communists. For twenty years, right, left and center disagreed about many things, but they all agreed on the direction that the country should go. In retrospect, that consensus created the basis for prosperity in Poland. JC: And regarding the Polish-Ukrainian relations. We know that antagonisms, e.g. the myth of Wołyń [a massacre of Poles that took place in what is now Western Ukraine, in 1943] are increasingly used in Polish political discourse today. In Ukraine, nationalist historians make heroes out of UPA, the Ukrainian revolutionary army, which is held responsible for this tragedy. Where do you see a start for burying the hatchet? Is the reconciliation of our nations possible? AA: So here’s a strange thing: For more than a decade after they both gained independence, Poland and Ukraine participated in a number of projects that were designed to solve exactly these kinds of Polish-Ukrainian differences. Books were published that were jointly written by Polish and Ukrainian historians, monuments were built. These projects were successful: If you’d asked me this question in 2010, I would have said that there are no real historical issues between Poland and Ukraine, that the two countries had mostly reconciled. For a number of reasons, this began to shift. In Poland, children and grandchildren of victims of the Wołyń massacre felt their tragedy hadn’t been fully recognized. In Ukraine, nationalist groups wanted the UPA partisans who had fought against the Soviet Union recognized for their heroism, despite the fact that some in this broad and not well-defined group were also linked to Wołyń. In both eastern Poland and western Ukraine, the memory of the ethnic cleansing that took place there in the late 1940s - Poles were moved West, Ukrainians East - to accomodate new borders has left feelings of displacement and bitterness. The wave of Ukrainian immigration, which started before the war, may have provoked some of this. But don’t underestimate the role played by Russia, which has always wanted to create discord between Poland and Ukraine, and pumps out propaganda to that effect in both countries. Vandalism on both sides of the border, damage done to cemeteries and monuments, is sometimes carried out by provacateurs working for Russia, just to create bad feelings. The Polish-Ukrainian conflict also hides a different reality: although there are real grievances and bad memories, the truth is that the biggest tragedies both nations experienced in the twentieth century were inflicted by the Soviet Union and Nazi Germany. That should unite these two countries, not divide them. JC: This week (19.04.2026 – Ed.) in Hungary we saw that using historical narratives to create grievance has no longer worked. Are you optimistic about the direction after Orban’s loss? AA: The Hungarian election was really important because it shows that people can actually resist powerful, dominant propaganda. The ruling party Fidesz controlled all of the TV, 90% of the newspapers, the constitutional court, the bureaucracy... and yet people had the nerve to vote against it and resist it. It’s also an important election because Hungary created a huge network of well-funded think tanks and foundations that were funding other far right groups and projects. So that loss is going to have a knock-on effect in other places too, maybe even in Poland. JC: What you’ve said about resisting propaganda reminds me of one of the interviews you did about talking to Russians in the post-Soviet era who claimed that people knew that the system was lying. Why do people choose to believe in these regimes anyway? AA: Because it’s useful. Stephen Kotkin, an American historian, once described how people would learn how to “speak Bolshevik”: It was just a language that you needed to use in order to get by in society. If you didn’t talk the way the regime wanted you to talk, then you might have problems, or lose your job, or your kids would not get into university. It was a way of getting along. Communist Poland was similar, at least in the early years. When I was writing a book about the Sovietization of Eastern Europe after World War II, I met a lot of people who wanted to talk a lot about the war, when many of them had done really heroic things. But almost nobody wanted to talk about the decade afterwards, between 1945 and 1956. This was when you had the short period of terror, violence and Polish Stalinism. To stay safe, people felt the need to just go along with what others were saying, or stay out of politics, or use communist jargon without necessarily believing it. I don’t judge them for it, and I wouldn’t describe all of those people as collaborators. It’s easy to feel moral certainty in retrospect, because we know that communism ended. But if you were living in 1949, it might not have been clear to you that communism was going to end. In very repressive societies, maybe about 10% of people who are really evil – collaborators, torturers. Maybe 10% of people are really brave and who find ways to resist. And then around 80% of people have kids, they have parents, they have to have jobs and they’ve had to get through it somehow. Strange though it may sound, I’ve found that the work I did on that book is now very useful in explaining some of what’s going on in the United States today. There are plenty of members of the Republican Party in Congress who know perfectly well that Donald Trump says many things that aren’t true. But they avoid criticizing him because it’s inconvenient, because they would get in trouble, because someone would attack them on the internet. So actually you don’t even need mass terror to get people to conform. JC: Is Gen Z reinventing agency? AA: We’ll see. In any generation you can find groups of people who want agency. If you live in a society that’s unfair, for example where a tiny number of people have captured most of the wealth, then at a certain point people rebel. This is always easier for younger people, who have you have less to lose. The question now is how the internet will affect the relationships between citizens and the state, and how it will change organizations. The “Twitter revolutions” people spoke about as early as 2008-9, mass protests organized online, have often proved to be very superficial. Although you can easily join something just by clicking, the work of creating a real movement requires physical participation. Successful mass movements of the past, for example the Civil Rights movement in the United States, were built by people who had spent many years together. They had participated in non-violent workshops together. They practiced and prepared. Just using the you can get everybody to show up at a certain moment, but then when the protest is broken up, nothing happens. It’s also true that the repressive regimes have more recently learned how to use the internet to undermine leaders and movements. Most of all, they now understand how to make people cynical. The form of propaganda that most modern authoritarians use - and I think the Russians really pioneered this - deploys sneering cynicism. Instead of praising the rulers, the regime propagandists mock the opposition movement leadership for being supposedly corrupt or sexually degenerate, with the goal of undermining any kind of idealism. JC: MAGA grew on the internet? AA: MAGA is a real grassroots movement. They had symbols, red hats, they showed up at rallies. But you’re right that the cynicism, the sarcasm and the distrust that the movement embodies came originally from the internet, and this is different. Fifty years ago, most European political parties had a social base in real organizations, in trade unions for Social Democrats, in church groups for Christian Democrats. As people stopped going to church and as the trade unions became smaller, the social base of these parties disappeared. Now people who wouldn’t have known one another in the past meet on the internet and create new movements, many of which don’t last. JC: Is history ending? Going in stale circles? AA: History never ends. In truth, human beings want contradictory things at the same time: order and freedom, stability and change. These things are never resolved, and when a society swings too far in one direction, people always push it the other way. But each time that happens, the result is different. Certainly it is true that we are now in a period when old philosophers and ideas from the 1930s are undergoing a revival. Carl Schmitt, who was a philosopher who was very influential on the Nazis, is back as an influence on both the far left and the far right, once again inspiring people to think that all politics has to be existential, that all politics is about defining and defeating enemies. In the US, some are also bringing back dominionism, the idea that we need a Christian and not a secular state. It’s also true that we are living through a more fundamental shift. The old left-right divide, which was mostly about the size of the state, is much less important now. Instead, we are arguing about more fundamental things: what are our rights, what protects our freedom. Or how much power do we want to give small elites, versus how much power to give ordinary people. In America a small group of very wealthy people now control information, because they control the social media platforms and AI, which means they determine what people will read and learn. Finding a way to preserve preserve zones of autonomy and independent thinking, this is going to be the main task for the next generation. JC: What is the one book that a person interested in Central Europe should read? AA: You could read my book “Iron Curtain: the Crushing of Eastern Europe” which tells the story of how the Soviet Union imposed its culture on the region. Or read Tim Snyder’s history of the region, “The Reconstruction of Nations: Poland, Ukraine, Lithuania, Belarus 1569-1999.” And everyone should read “The Captive Mind” by Czesław Miłosz, which describes exactly the phenomenon we were talking about: why do people collaborate? I joined Scott Galloway and the brilliant Fiona Hill in a discussion about the wars in Ukraine and Iran, the future of global power, and what these conflicts reveal about America's role in the world. Scott told us that this was the 400th edition of his podcast, which is quite a number: My friend Francesco Chiamulera runs a brilliant series of literary events, Una Colline di Libri, A Hill of Books, in the Prosecco Hills, a region of vineyards and elegant hill towns in the Veneto, north of Venice. We did an event in Vittorio Veneto and also drove and biked around the countryside. Buy Autocracy Inc Buy Iron Curtain Open Letters, from Anne Applebaum is a reader-supported publication. To receive new posts and support my work, consider becoming a free or paid subscriber. Subscribe
Top 2027 high school football prospects in Pennsylvania
Pennsylvania has long been an under-the-radar hotspot for high school football talent, and the 2027 class might be its best in recent memory. This year’s crop features three five-star prospects in the Rivals Industry Ranking — tied with California and just one behind Florida. The class isn’t just top-heavy, though. Twelve players in the state […]
San Antonio mom of five building healthy parenting habits through series of free classes
Art, not politics, explains the achievement of ‘Death of a Salesman’
Liberals say Arthur Miller’s classic, thriving on Broadway, indicts capitalism. No, it captures human pathos.
Texas A&M's 2027 recruiting cycle now unanimously ranked No. 1
Texas A&M's 2027 recruiting class is now the unanimous No. 1-ranked cycle after 247Sports' latest update.
Thursday’s camps see Ohio State’s send out several new offers
Thursday’s one-day position camp sees Ohio State’s staff sending out several new offers in the 2028 and 2029 classes
Ohio lawmakers send math intervention bill to Gov. Mike DeWine with science of reading exemption
An academic intervention bill that would also exempt Ohio’s classical schools from teaching the science of reading curriculum is heading to Ohio Gov. Mike DeWine’s desk.
Ukraine's latest drone class is crippling Russia's supply bridges
Drone footage appears to show several bridges burning and suffering visible structural damage.
Principal Charity Classic: Agronomists use science to prepare greens at Wakonda Club
Agronomists play a crucial role in golf tournaments, using advanced tools and techniques to ensure greens are ready for competition at the Principal Charity Classic.
Disability rights organizations challenge N.Y. medically assisted suicide law
The organizations claim that people with life-threatening disabilities belong to a protected class and are at risk of harm if the law goes into effect.
Changes to come for high school sports next year
FHSAA Board of Directors approve new Open Division championship classification for 11 sports.
My Student Experience: Science Education Majors Receive Funding to Travel to National Science Teaching Association (NSTA) Conference in California
As a science education major in NC State’s College of Education, Gillian Grimmick is always thinking about creating lesson plans and lab activities for her future classroom. So, she was thrilled when she had the opportunity to attend the National Science Teaching Association (NSTA) conference in Anaheim, California, in April.
Michael Bisping breaks down Ciryl Gane vs Alex Pereira
History could be made in the UFC Freedom 250 co-main event on Sunday. Former two-division titleholder Alex Pereira has the opportunity to become the first fighter in the promotion's history to win championships in three different weight classes. Pereira takes on former interim champion ands title ...
Top 25 prospect Davion Thompson commits to Arkansas basketball
Top 25 class of 2027 prospect Davion Thompson has announced his commitment to Arkansas coach John Calipari and staff over other finalists Michigan, Baylor and Vanderbilt.
Kenan Thompson explains how sharing an office with Colin Jost for 8 years led to a classic 'SNL' sketch
'Saturday Night Live' star Kenan Thompson explained how a famous sketch came about because he shared an office with Colin Jost. They were 'office mates for like eight years.'
Science educators explore STEAM lessons during immersive visit to OSF Jump Simulation & Education Center
Key Takeaways:Science educators from across Illinois explored hands-on STEAM activities at OSF Jump Trading Simulation & Education Center, gaining classroom-ready ideas and resources.OSF HealthCare highlighted free educational tools and activities that inspire student interest in health care and STEAM careers.Educators discovered new engagement ...
🏆 Y! Sports AM: Best Stanley Cup ever?
It's starting to feel like we might be witnessing an all-time classic.
Business Restructuring Review Vol. 25 No. 3 May-June 2026
In This Issue Texas Bankruptcy Court Adopts Barnet Rule Requiring Foreign Debtor to Have U.S. Assets to Be Eligible for Chapter 15 Relief In In re Siu-Fung Ceramics Holdings Limited, No. 24-33299, 2026 WL 382424 (Bankr. S.D. Tex. Feb. 10, 2026), the court denied petitions for chapter 15 recognition of Hong Kong bankruptcy and liquidation proceedings commenced on behalf of an individual debtor and a group of companies that he owned or controlled. According to the court: (i) the corporate debtors' Hong Kong liquidation proceeding was not eligible for chapter 15 recognition because the attorney retainer upon which such relief was based was not funded until nine months after the chapter 15 petition date; and (ii) the individual debtor's Hong Kong bankruptcy case could not be recognized because the debtor's "center of main interests" on the chapter 15 petition date was not in Hong Kong, and he did not even maintain an "establishment" there. [read more …] Southern District of Texas Clarifies Post-Purdue Course for Consensual Third-Party Releases and Gatekeeping Provisions In In re Container Store Group, Inc., 676 B.R. 356 (S.D. Tex. 2026), appeal filed, No. 26-20166 (5th Cir. Apr. 14, 2026), cross appeal filed, No. 26-20166 (5th Cir. Apr. 24, 2026), the U.S. District Court for the Southern District of Texas addressed consensual third-party releases and gatekeeping provisions in the aftermath of the U.S. Supreme Court's ruling in Harrington v. Purdue Pharma L.P., 603 U.S. 204 (2024). Consistent with existing Fifth Circuit precedent, the court confirmed that, in appropriate circumstances, consent for third-party releases may be obtained through a creditor's failure to opt out of granting that consent. But, the court ruled, consent through an opt-out mechanism essentially can never be inferred for creditor classes that stand to receive no recovery under a chapter 11 plan and that are deemed to reject the plan by operation of applicable bankruptcy law. Instead, those classes must affirmatively opt in to any release. The court also narrowed and remanded the bankruptcy court's acceptance of a broad gatekeeping provision, ruling that such provisions must correspond to the restrictions established by Fifth Circuit precedent. [read more …] Delaware Bankruptcy Court: Initial Transferee Need Not Be Defendant in Fraudulent Transfer Avoidance and Recovery Litigation The Bankruptcy Code gives a bankruptcy trustee the power to avoid asset transfers that are either made with the intent to defraud creditors or that are "constructively" fraudulent because an insolvent debtor did not receive adequate value in exchange. The Bankruptcy Code also permits recovery of an avoided transfer from not only the initial recipient, but also from subsequent transferees. Courts disagree over whether a transfer must actually be avoided before the trustee can seek recovery from a subsequent transferee and whether the initial transferee must also be a defendant in the recovery litigation against a subsequent transferee. The U.S. Bankruptcy Court for the District of Delaware weighed in on this debate in Phillips v. SS Associates LLC (In re ONH AFC CS Investors, LLC), No. 23-10931 (CTG), 2026 WL 312892 (Bankr. D. Del. Feb. 4, 2026). The court adopted the majority view, ruling that the initial transferee need not be a defendant in avoidance and recovery litigation against a subsequent transferee, but that the trustee must establish the elements necessary to avoid the initial transfer as part of the recovery litigation. [read more …] New York Bankruptcy Court Weighs In on Adequate Assurance of Future Performance under Assigned Leases and Chapter 11 Plan Exculpation Provisions In order to assume and assign an executory contract or unexpired lease, a bankruptcy trustee must cure most defaults under the agreement and provide "adequate assurance" of the assignee's future performance. However, the Bankruptcy Code provides no guidance as to the meaning of "adequate assurance" other than with respect to shopping center leases. In In re Broadway Realty I Co. LLC, No. 25-11050, 2026 WL 147505 (Bankr. S.D.N.Y. Jan. 19, 2026), the U.S. Bankruptcy Court for the Southern District of New York examined this issue in connection with a proposed assignment of thousands of residential leases as part of a free-and-clear sale of debtors' properties. The court held that "adequate assurance" does not mean a guarantee of the assignee's future performance, but merely demonstration that the assignee has the ability to satisfy the underlying obligations. The bankruptcy court also ruled that an exculpation provision in the debtors' chapter 11 plan exonerating non-estate fiduciaries from liability for actions taken in connection with the chapter 11 case was unobjectionable, provided it was limited in scope to postpetition conduct and actions taken in connection with implementation of the plan after its effective date. [read more …] Newsworthy Corinne Ball (New York) (Hall of Fame), Bruce Bennett (Los Angeles), Carl E. Black (Cleveland), Jeffrey B. Ellman (Atlanta), Brad B. Erens (Chicago), Gregory M. Gordon (Dallas), Heather Lennox (Cleveland/New York), Joshua M. Mester (Los Angeles), and Kevyn D. Orr (Washington) were included in the 2026 edition of Lawdragon 500 Leading Bankruptcy and Restructuring Lawyers. The Daily Business Review selected Isel M. Perez (Miami) as an "On the Rise" winner for the Florida Legal Awards. The Florida Legal Awards annually recognize those who have made significant contributions to the legal industry in Florida. Dan T. Moss (Washington/New York) was inducted as a Fellow in the 37th Class of the American College of Bankruptcy at its Annual Meeting in March 2026 in San Antonio, Texas. Christine Borries (Munich) was ranked in the practice area Restructuring/Insolvency in the 2026 edition of Chambers Germany. The 2027 edition of The Best Lawyers in Singapore™ recognized Sushma Jobanputra (Singapore) in the practice area Insolvency & Reorganization. The restructuring transaction involving Eissmann Automotive North America, Inc. received the "2025 Turnaround of the Year (Large Company)" at the Turnaround Management Association (Detroit) Annual Awards Reception. T. Daniel Reynolds (Cleveland) and Nick Buchta (Cleveland) represented subsidiaries of Eissmann Group Automotive in connection with the parent company's German insolvency proceedings. Roger Dobson (Sydney) is among 40 Jones Day lawyers recognized by The Best Lawyers in Australia 2027 for his contributions in Banking and Finance Law; Distressed Investing & Debt Trading; Insolvency and Reorganization Law; Litigation. An article written by Corinne Ball (New York) titled "Ard Finance—A Global Enterprise Combining an LME With a Foreign Insolvency Proceeding and Chapter 15" was published in the April 21, 2026, edition of the New York Law Journal. An article written by Alex Sapp (New York) titled "Recent Developments in Section 510—Subordination" was published in the 2025 edition of the Norton Annual Survey on Bankruptcy Law. An article written by Brad B. Erens (Chicago) titled "New York Bankruptcy Court Approves Insider DIP Litigation Financing" was published on April 6, 2026, by Lexis Practical Guidance. An article written by Corinne Ball (New York), Dan T. Moss (Washington/New York), David S. Torborg (Washington), and Isel M. Perez (Miami) titled "New York District Court Affirms Narrow Scope of 'Public Policy Exception' in Chapter 15 Cases" was published on April 6, 2026, by Lexis Practical Guidance. An article written by Jeffrey B. Ellman (Atlanta) titled "Statutory Cap on Lease Rejection Damage Claims in Bankruptcy Applies to Solvent Debtors" was published on April 6, 2026, by Lexis Practical Guidance. An article written by Trisha L. Mowbray (Real Estate; Chicago) and Ryan Sims (Washington) titled "Chapter 11 Plan that Abridged Non-Debtor Lessee's Rights to Remain in Possession After Rejection Unconfirmable as Having Been Proposed in Bad Faith" was published on April 6, 2026, by Lexis Practical Guidance. Lawyer Spotlight: Ben Rosenblum Ben Rosenblum, a partner in the New York Office, represents debtors, creditors, and other parties in out-of-court restructurings and court-supervised proceedings, including chapter 11 cases, municipal bankruptcies, international insolvency matters, and stockbroker liquidations. His experience spans industries such as manufacturing, shipping, mining, aviation, energy, real estate, and telecommunications. Ben's notable debtor representations include Peabody Energy, the City of Detroit, Chrysler LLC, Spansion Japan, and Dana Corporation. Significant creditor representations include General Maritime Corporation, Calpine Corporation, American Home Mortgage, and Murray Energy. He currently represents creditors in Puerto Rico's restructuring. He also has extensive experience advising financial institutions on bankruptcy law as applied to derivatives.
Sibel Health Receives EU MDR Class IIb CE Mark for ANNE® One: The First Wireless Wearable Patient Monitoring Platform Certified to Key Interoperability Standards
/PRNewswire/ -- Sibel Health Inc., an award-winning medical technology company, today announced that its ANNE® One system has received CE Mark certification...
“The Magic Mile” Happy Hour Show Returns to Headline Long List of Free Entertainment for Race Fans at New Hampshire Motor Speedway
This August at New Hampshire Motor Speedway, fans can enjoy a mix of new and classic entertainment during New England's only NASCAR Cup Series weekend. Highlights include “The Magic Mile” Happy Hour Show, the Van Halen tribute band Everybody Wants Some, Family Movie Night with "Zootopia 2" and various games and activities throughout the weekend.