SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " client " 935 found 🔀 AI-powered Shuffle
OPINION | OTHERS SAY: Put an end to resentment politics
American politics is being hijacked not by one ideology, one party or one faith but by influential voices who have discovered that resentment attracts attention, outrage builds audiences and division produces political power.
Georgia no. 1, Tennessee third in business magazine rankings
For the 13th straight year, Area Development magazine has put Georgia atop of its 2026 list of top states for doing business. Tennessee came in at No. 3 on the list, just behind Texas.
ENTERTAINMENT: Pianist-composer joins ASO musicians for chamber concert; Monster Jam celebrates 35 years in February
From fine art and film to comedy and monster trucks, there's entertainment for everyone at these upcoming events.
ENTERTAINMENT: Pianist-composer joins ASO musicians for chamber concert; Monster Jam celebrates 35 years in February
From fine art and film to comedy and monster trucks, there's entertainment for everyone at these upcoming events.
Arkansas volleyball drops second straight SEC match at Georgia
The Arkansas volleyball team lost its second straight SEC game, falling to Georgia 3-1 on the road Friday.
UCA trustees approve 12% health insurance premium hike for employees
CONWAY -- University of Central Arkansas employees are set to see their health insurance premiums jump 12% after the university's Board of Trustees unanimously approved the increase Friday morning.
Whitefish Lake Institute hosts Science Quencher Oct. 9
Local voices of science and conservation will speak on northwest Montana’s wildlife and environment at Whitefish Lake Institute’s Science Quencher on Oct. 9 from 5 to 7 p.m. in the Ramsey Room at The Lodge at Whitefish Lake. This event is free and open to the public.
Whitefish Lake Institute hosts Science Quencher Oct. 9
Local voices of science and conservation will speak on northwest Montana’s wildlife and environment at Whitefish Lake Institute’s Science Quencher on Oct. 9 from 5 to 7 p.m. in the Ramsey Room at The Lodge at Whitefish Lake. This event is free and open to the public.
Mid-America Science Museum COO Noreen Killen named interim CEO
Noreen Killen is stepping into a familiar role Saturday as she was named the interim CEO for Mid-America Science Museum.
Benefits platform Afore adds life insurance path through Ascent alliance
The referral arrangement gives Afore advisors access to buy-sell and estate planning for employer clients who also own businesses
Arkansas basketball expected to host more top talent soon
Arkansas basketball coach John Calipari and staff will take a break from hosting recruits this weekend after recently entertaining five of the top prospects in the nation.
Stats for Arkansas football's 2027 commitments
How Arkansas’ 2027 football commitments are faring.
Small business owners beginning to adopt artificial intelligence, Fed study says
Small business owners are beginning to adopt artificial intelligence and are using the technology as a part of their daily operations, according to a survey by Heartland Forward.
Small business owners beginning to adopt artificial intelligence, Fed study says
Small business owners are beginning to adopt artificial intelligence and are using the technology as a part of their daily operations, according to a survey by Heartland Forward.
Kentucky Gov. Andy Beshear and Razorbacks coach John Calipari talk politics and basketball during appearance in Little Rock
Kentucky Gov. Andy Beshear spoke with John Calipari, the head coach of the University of Arkansas men's basketball team, during an appearance in Little Rock on Thursday.
INSBANK Honors Four Middle Tennessee Business Leaders at 10th Annual INSBY Awards
/PRNewswire/ -- INSBANK proudly celebrated the 10th Annual INSBY Awards on September 30, recognizing four outstanding client businesses whose innovation,...
WME Unveils Creator Labs to Help Clients Build Media Businesses
Clients including creator Julian Shapiro-Barnum, soccer star Erling Haaland and more have tapped into the services.
COO Noreen Killen tapped as interim CEO of Mid-America Science Museum
Noreen Killen will step into the role of interim CEO of Mid-America Science Museum, its board of directors announced Thursday.
Get to know: '28 Arkansas football target Braceson Mitchell
Searcy junior offensive lineman Braceson Mitchell received an offer from Arkansas last week following a recent visit to Fayetteville.
PHD leader outlines vision for health
The interim director of Panhandle Health District told community members this week that he wants to conduct a five-year study on the quality and cost of "functional medicine" compared to "conventional medicine."
Media Briefing: Publishers are turning GEO from an experiment into a business
Publishers are turning GEO into a new revenue stream as clients increasingly look to boost their brands’ visibility in AI-generated answers.
Arkansas basketball notebook: John Calipari speaks on Protect College Sports Act, Primetime at the Palace
Calipari spoke for over five minutes when he was asked about the bill, which passed in the U.S. Senate by a 77-22 vote on Monday.
What Does Your Office Say About Your Business? by Jennifer Kraner
What does your space say about you and your business? More importantly, does it give you the best possible first impression? The minute a client, customer or patient walks through your door, they’re forming an opinion about your business – sometimes consciously, sometimes without even realizing it. Your space is communicating something about you, whether you intend it to or not. At Big Sky Design, we work with all kinds of commercial businesses, including many medical practices, law firms and other corporate offices, and I’ve seen first hand how much thoughtful design can influence that first impression. For businesses in medical, legal, and financial fields, three things are particularly important: trust, privacy and professionalism. Your space should communicate all three while also reflecting who you are as a business. That can be challenging, especially in a new construction project. Often, so much of the budget goes toward the actual construction that things like lighting, comfortable seating, artwork and finishing touches get pushed to the side. But those are often the elements that make a space feel complete – and memorable. Think about your waiting room. Is it comfortable? Is the lighting welcoming? Does the layout make sense? When someone walks through the door, do they immediately know where to go and whom to speak with? In a medical office, there’s another important consideration: privacy. Reception areas can become surprisingly noisy places, with phone calls, conversations between staff and patients, and people discussing personal information. Hard surfaces throughout a space allow sound to bounce around, making it difficult to maintain privacy. We recently worked with an eye doctor's office that had exactly this problem. The reception desk had a large opening, and staff were making and taking phone calls right next to patients who were waiting. We designed an acoustic treatment that acted as a divider between the staff and waiting areas. It absorbed sound, but it also became a branded design element. It was a visual reminder to everyone in the space to be mindful of their voices and what others might be able to hear. Those kinds of thoughtful details can make a tremendous difference. And good commercial design doesn't have to mean making your space flashy. Sometimes it’s as simple as a calming color palette, beautiful artwork, plants, carefully selected lighting or comfortable upholstered furniture. In a medical setting, those touches can help soften what might otherwise feel clinical and reduce anxiety for patients who are already nervous about an appointment. I’ve been in waiting rooms where everyone feels packed together, and you can hear every conversation – even what’s happening in the restroom next door. That’s not the experience you want to create. Your office should also feel like your business. Are you telling people that you’re clean and modern? Sophisticated and unique? Warm and welcoming? Or, unintentionally, are you telling them that your business is outdated? You don’t necessarily need a complete renovation to change that message. Fresh paint, updated lighting, new artwork, better seating or a few branded design elements can make a space feel current and intentional. At Big Sky Design, we’ve worked with radiology, dermatology, and dental practices, among many others. Every practice is different, but the goal is always the same: creating a space that reflects the business behind it and gives every person who walks through the door a positive first impression. Because your office is part of your brand. Make sure it’s telling the story you want people to hear. Read more at bigskydesignonline.com.
ENTERTAINMENT: Fiesta en SoMa celebrates Hispanic heritage
SoMa 501 is sponsoring Fiesta en SoMa: Rancho Bernice, “a special edition of SoMa After Dark,” according to the organization’s website.
Ohio wins more praise from site-selection experts — but data center backlash looms
Site selectors say data centers are dominating their agendas, while access to reliable power has become a top concern among clients.
WholeHogSports Daily Podcast: Protect College Sports Act passes Senate, other news with Brandon Marcello
Matt Jones and Brandon Marcello discuss the week's biggest headlines in college football.
Protecting Your Clients and Your Business From Fraud
Essential real estate fraud prevention tips for agents: verify, detect, and report to protect clients and transactions.
Bloomington Police mental health program shows positive results
Early results for Bloomington Police Department’s brain health program show increased client well-being, high satisfaction, positive community reception and a meaningful reduction in barriers to accessing mental healthcare.
Newrez Turns Servicing Data Into Repeat Business For Brokers
Newrez is extending its homeowner-engagement platform to wholesale borrowers, giving brokers a potential path back to clients when another mortgage opportunity emerges.HomeHub is now available to protected wholesale borrowers, allowing homeowners to monitor estimated home values and equity, explore refinance and home equity opportunities, and search local listings.
Sarah Sanders’ cynical playground-bully politics
Having covered Tom Cotton's nomination Tuesday, we turn today to his salty competition for political cynic of the year. It's Gov. Sarah Sanders, trained by Donald Trump himself.
Then and Now: Graves helps clients buy, sell businesses
Barry Graves has brokered more than $1 billion in deals across Arkansas, Oklahoma and Missouri. As executive broker at Cantrell-Griffin Business Brokers he helps business owners navigate the decision of...
Financial Integrators, LattaHarris form strategic partnership
Des Moines-based Financial Integrators and Cedar Rapids-based LattaHarris have entered into a strategic partnership to provide more coordinated wealth management, tax, accounting and advisory services to business owners, families and individuals. The firms will remain independent while collaborating to expand access to specialized expertise and resources and enhance client service. Financial Integrators provides wealth management…
How real estate agents can build business without waiting on rates or inventory
Real estate agents can reduce hesitation by reactivating past clients, improving service standards and sharing consistent market guidance.
Iowa attorney sentenced to federal prison for health care fraud
A 67-year-old Iowa attorney has been sentenced to six months in federal prison after pleading guilty in a health care fraud case. Timothy Mark Anderson of Garner worked with clients with nursing home expenses who hoped to qualify for Medicaid. According to the Department of Justice, Anderson is also “an avid collector of luxury vehicles” […]
Business News: Gallet’s Return Heralds Renewed Battle For Mid-Tier Priced Watch Segment
After years of moving up in category and price, inflation overload pushes some Swiss brands and clients back to the middle.
Weight Watchers and Google Health Launch Weight Health Collaboration for Employers and Payers
Weight Watchers and Google Health Enterprise have launched a collaboration combining wearable technology, health insights and behavioral weight management, expanding Weight Watchers’ offering for employers, health plans and other payers. Key Investor TakeawaysWeight Watchers (NASDAQ:WW) is integrating Google Health Enterprise technology into select Weight Watchers for Business client programs.
ITG Appointed Global Content Partner for Merlin Entertainments
Under the partnership, ITG provides Merlin with global client services teams, content production facilities, film and photography capabilities and access to its proprietary Storyteq platform
A majority of Oklahoma's behavioral healthcare workforce is part-time, analysis says
Oklahomans seeking mental healthcare may struggle to locate a provider. Finding someone available to see clients full-time is even harder.
Tom Cotton and the competition for political cynic of the year
It's a heavyweight bout, this competition for political cynic of the year between two world-class competitors, Tom Cotton and Sarah Sanders.
OCT NIBJ: Women in business: Building success together in Sandpoint
Women have always been an important part of Sandpoint’s business community. From entrepreneurs and business owners to managers, professionals, employees, nonprofit leaders, and community volunteers, women contribute every day to the strength and character of our local economy.
Arkansas football has productive recruiting day for Tulsa game
Arkansas football had a productive Saturday evening hosting recruits from several different classes for unofficial visits for the Tulsa game.
Lush's six-month parental leave exposes the retail benefits gap
A state top-up model funded full pay for frontline workers, and it offers a blueprint for retail employer clients
IBM is Building a Bigger Software Business. Can Its Balance Sheet Keep Up?
On September 24, International Business Machines Corporation (NYSE:IBM) announced two key capabilities designed to strengthen its digital asset infrastructure for tier-one financial institutions, governments, and regulated entities. In a new beta rollout, IBM Digital Asset Haven clients can connect to SWIFT’s blockchain-based shared ledger, linking into a cooperative network of over 12,500 financial institutions across […]
Bobby Kotick’s lawyers sent me a bad email (and later apologized)
The message I had received was unsettling—for a moment. Then it was just really confusing. Back on January 20 of this year, at 5:15pm ET, I received an email with the subject line “Legal Correspondence re Bobby Kotick.” It was from the law firm Clare Locke, a firm I’d heard had been emailing reporters in recent years about their coverage of Kotick, the former, longtime CEO of Activision Blizzard. The letter was threatening. A lawyer from the firm introduced themselves as “defamation counsel to Bobby Kotick.” They issued a “demand” that I “correct” a Game File article I’d published a week prior. The article that had irked them had been a scoop of sorts. I’d written about a a 2022 lawsuit brought by a Swedish pension fund, AP7, over Microsoft’s purchase of Activision Blizzard. The suit wasn’t news, but I was first to review and report about Kotick’s extensive pushback to the fund’s claims. The pension fund’s core contention was that the sale had been rushed by Kotick to avoid the consequences of sexual misconduct scandals swirling around the company in 2021. (He’d not been accused of misconduct himself in those suits, to be clear.) As I wrote at the time, Kotick had denied the allegations of the rushed sale. Beyond that, Kotick used a December 2025 reply to the Swedish fund’s lawsuit to assign blame for those workplace scandals, the bad press and even for the AP7 lawsuit. I’d found Kotick’s arguments novel and newsworthy. Across nearly 3,000 words, I explained Kotick’s take: that a Swedish gaming company was behind the Swedish fund’s lawsuit (the Embracer group; they denied it); that the Microsoft-Activision deal was not rushed and was secured at what Kotick felt history had proven to be an optimal price for shareholders; that he believed a conspiracy of people at unions government agencies, PR firms and the media had spun up claims of widespread workplace misconduct at Activision Blizzard in 2021. The article gave context for all of this, letting readers assess the claims and weigh their credibility. As I’d later write to Kotick’s lawyers: I would be surprised if you could point to any news article about Bobby Kotick in the last five years that has spent more of its wordcount articulating his point of view. He is welcome to do an interview with Game File any time. Nonetheless, there they were in my inbox that Tuesday evening: Clare Locke, the law firm that secured a $787.5 million settlement from Fox News over false statements about voting machines. They were emailing me, threatening that failure to comply with their demand could support a claim of “actual malice,” a legal standard for libel. Unless… Unless, they said, I added a key paragraph to my article. This was a paragraph that I already knew Kotick’s lawyers had been emailing reporters about for at least a year, and it was a paragraph that was already in my article. The paragraph they wanted is from a 2023 settlement that California’s Civil Rights Department struck with Activision Blizzard. The settlement had closed a two-year-old lawsuit over alleged sexual discrimination at the game maker. The paragraph basically said that claims of systemic or widespread sexual harassment—or of execs like Kotick tolerating such behavior—had never been proven. I’d already seen proof that Kotick’s lawyers had pushed for the settlement’s language to be added to reports about 2021 sexual discrimination and misconduct lawsuits brought against Activision Blizzard by California and, separately, by the U.S. federal government (both suits were since settled). I knew that Kotick and his lawyers felt that the California settlement language should be mentioned in the same breath as references to an article he hated and denied, a November 2021 Wall Street Journal article claiming Kotick knew “for years” of sexual misconduct at Activision Blizzard. So, in the Game File article that Clare Locke emailed me about, in the interest of ensuring I was being fair and balanced regarding the person I was covering, I had already included the following excerpt from the California settlement [emphasis added in bold]: (Kotick has repeatedly pushed back against that November article in the Wall Street Journal, citing among other things, language from a court-approved consent decree as part of Activision’s 2023 $54 million settlement over the California suit. It states: “no court or any independent investigation has substantiated any allegations that: there has been systemic or widespread sexual harassment at Activision Blizzard [or] that Activision Blizzard senior executives ignored, condoned, or tolerated a culture of systemic harassment, retaliation, or discrimination.”) On the evening of January 20, I was incredulous. How do you write a four page legal threat about a week-old article and miss this? While scrambling to also make my kids dinner, I wrote a lengthy reply to Clare Locke’s lawyers, basically asking them to cool it with the threats and to start making sense. In part, I wrote: I hope you can understand why I am having trouble understanding what you’re asking for, when the statement you’re demanding to see in Game File’s article already appears in Game File’s article. Actual malice, as you know, refers to a reckless disregard for the truth. I’m not sure what your argument is when my article already states your client’s position. Here is where I should remind you, the reader, that I am an independent journalist. I publish on Substack, and have availed myself of the Substack Defender program that provides writers on the platform with legal support. But I’m no Wall Street Journal or New York Times, nor even IGN or GameSpot when it comes to such things as, well, having a legal department. There are more fun things for me to do as an independent journalist than writing back to a powerful law firm representing a very rich person. On the evening of January 20th, I was just trying to cook some pasta, broccoli and chicken nuggets for hungry twins. Nevertheless, I wrote back to them. Two hours later, I got a reply. Summarizing: A lawyer for Clare Locke said they’d “reviewed an incomplete version” of my article and they “apologize for the confusion.” (My guess: Someone didn’t read past the piece’s paywall, even though they’d had a full week to scrounge up the funds to do so. What I’d published above the paywall was balanced, as was what came after.)1 That was almost that, but something about the situation bothered me. The letter had been marked “confidential.” I hadn’t agreed to that, and I disliked the idea that powerful people on the beat that I cover would act like they could unilaterally control what I might tell my readers about. On the morning of the 21st, having already gotten the powerful law firm to back off, I oh-so-wisely re-approached them with just one more thing. I thanked them for clearing things up the night before but noted that I’d never agreed to keep their letter confidential. I’m all for agreeing with a source to keep things off the record, but that’s the thing. We have to agree. You can’t just declare it. I’m not bound by that. I wrote to Clare Locke’s lawyer and said, in part: I trust the matter is resolved. It was disappointing to have to spend less time with my kids last night in order to address your legal letter. Family time’s precious. I will add, for clarity’s sake, that, while your letter stipulated that it was confidential, I did not agree to those terms. In the future, should you wish to communicate with me confidentially, I am happy to agree to classifying our communication as “off the record” prior to the actual communication—as is standard with any professional journalist. The firm’s lawyer replied, not directly addressing the confidentiality issue but asserting that the matter was resolved. Why I didn’t write about this until now In May, I told this story on an episode of Simon Parkin’s podcast My Perfect Console, but I held off on sharing it directly with Game File readers. I held off to avoid stepping on the toes of another reporter, the journalist Mikhail Klimentov. He’d interviewed me in the spring of 2025 about an investigation he was working on regarding Bobby Kotick lawyers pressing the media to add the California settlement language to stories referencing the 2021 lawsuits. And about how some outlets had changed their stories and how some simply deleted them. Initially, I was a third-party source for Klimentov’s reporting, providing on-the-record context about the state of the games media. I’d heard about the letters but hadn’t put the time into pursuing the story. I thought it was interesting, and I was glad he was covering it. When the outlet that Klimentov was going to run his reporting in dropped the story, I began talking to him about potentially publishing his reporting on Game File. This was tentative. Then, in January, when I got my own Clare Locke letter, I told Klimentov that I didn’t think it would make sense for me to publish him, not with me now being part of the story. I had my own version of this situation to tell. But I wished him well and said I’d refrain from telling my tale until he could get his reporting out there. Last Friday, Klimentov finally ran his investigation, in a nearly 48-minute video report for People Make Games. It covers various Clare Locke letters, how media outlets reacted to them and what to make of all this. His video weighs the merits of Kotick’s request and looks at some of the articles that were changed (one of which had a glaring error). I highly recommend watching it: (Note, I did some editorial consulting for a People Make Games video last year but nothing to do with this report.) While many outlets haven’t left any public evidence that they updated their Kotick coverage at Kotick’s counsel’s request, at least one has. Back in October 2025, the mainstream outlet Reuters applied the most transparent article update I’ve seen. On the 3rd of the month, they published an article about the state of the Swedish pension fund’s lawsuit. Days later, they added this: In an October 7 letter sent after publication of this article, Kotick’s defamation counsel disputed claims of widespread harassment at Activision. “Not a single investigation, court finding, verdict, or ruling ever concluded that there was any merit” to the allegations of widespread harassment at Activision, Tom Clare and Nick Brechbill of Clare Locke wrote. I’ve never added a statement to my article on Game File, because none was needed. Not for fairness’ sake, nor to meet any demands of Kotick’s lawyers. I’ve nevertheless wanted to be transparent with Game File readers. If someone powerful is questioning my reporting, is threatening a lawsuit over it… if that threat is part of a pattern involving other games media outlets and if, in my case, the whole thing ran into a ridiculous ditch, I want you to know about it. I also share this as a real example of how I handle threats to Game File. I stand up for my own reporting, even when it’s not comfortable to do so. (In that same category of standing up for the work I do, I’ll point to an incident in late August. Asocial media post I published to X/Twitter regarding reporting I did about Take Two and GTA VI was hit by bogus copyright claim by a firm working for the publisher. I pushed back and got it reversed; even while a bigger games media outlet let themselves be censored. This is the other reason I’m sharing this story: To emphasize that dealing with threats from powerful people is one of the costs of covering the video game industry independently and as fearlessly as possible. This is where you come in. Your support, through free and paid subscriptions (sign up here!), can help me keep doing that. It can ensure that I’ve got the back-up I need. And it can help make fiascoes like this even less of a worry, so I can spend my evenings dealing with more important things, such as making sure I steam the kids’ broccoli just right. 1 That pension fund lawsuit I wrote about in January has all but gone away. In May, the fund and Activision Blizzard owner Microsoft agreed to settle. Lawyers for the fund brokered a $250 million settlement for former Activision Blizzard shareholders. In the settlement, the fund’s lawyers changed their rhetoric. Where once they’d questioned the meaning of the California settlement language, they adopted a version of it for themselves. Several weeks ago, while seeking to get a court to sign off on the terms of the settlement, they proposed their fee for their work in the case: $60 million.
Anatomy IT Launches Health IT™ 360 Solution for Healthcare Leadership
/PRNewswire/ -- Anatomy IT, a leading managed service provider for healthcare, announces today the launch of Health IT™ 360, an innovative healthcare...
140,000 Missourians are at risk of losing Medicaid coverage under a new rule. One enrollee is suing
A new lawsuit challenges Medicaid regulations set to go into effect Jan. 1 that could hinder access to healthcare for people with chronic conditions. A Kansas City-based nonprofit says its client qualifies but struggles to clear administrative hurdles.
Lawyer who left corporate does AI training to supplement his practice
Ron Masciantonio left his job at Five Below and started his own legal practice. He says AI training is great for filling in the gaps between clients.
Haverhill Chamber Names Damark Woodcraft Business of the Month
Damark Woodcraft of Haverhill is the Greater Haverhill Chamber of Commerce’s September business of the month. The company, formed more than 35 years ago, makes hand-built custom furniture, kitchens, doors and more. It helps clients design homes, offices, restaurants and other settings. Mark Brady, owner and president, incorporated the business with his father in 1991.
Siloam Springs business owner raises concern over water leaking into basement of historic structure
SILOAM SPRINGS -- When a leak was noticed in the basement of Park House Kitchen + Bar, staff checked for plumbing leaks, drainage issues, air-conditioning runoff and anything else they could think of that might be causing the issue, according to business owner Alma Sanchez.
Art that serves others: How a Harnett County muralist is making a lasting mark in her community
Van Goat Studios, which has been operating since 2019, has allowed Johnson to express herself and reflect the spirit of local communities through murals. Photo provided by Elyse Johnson.Elyse Johnson of Van Goat Studios in Dunn wants to spread her artistry and make a lasting mark in her community. Van Goat, which has been operating since 2019, has allowed Johnson to express herself through murals and decorating electrical boxes in the urban landscapes of North Carolina. On top of traditional mural painting, Johnson offers what she calls “portable murals,” an option tailor-made for structure owners who do not want to commit to a design for their wall.“A contractor builds a framed piece of wood, and then they can frame the ‘mural’ onto the wood, whether it’s into their building, whether it’s interior or exterior,” Johnson said. The beginnings of Johnson’s journey into establishing Van Goat Studios reflect the teachings she wants artists to take away today: everything is a learning opportunity. When she started Van Goat, she shared it was a joint venture with a business partner. “I mainly did that because I didn’t feel like I was ready to go and do this on my own,” Johnson said. Her business partner eventually dropped out of the project, deciding she wanted to pursue other forms of art. That is when Johnson was thrust into growing her business on her own during and in the aftermath of the COVID-19 pandemic. “I had built up my confidence enough to go out and reach new heights,” she said. “And I was probably one of the few that benefited from COVID.”The moment presented a silver lining for Johnson. One of her first projects was a Farmers Day mural for the town of Coats. “When COVID-19 hit, Coats was not able to hold their annual festival, so they had a little bit of savings. They decided they wanted to do something for their community without getting anyone sick,” Johnson said.From there, word of mouth spread. Now, Johnson has an organic way of approaching projects. “Like a lot of muralists, if I feel inspired by a building, I will just go up and talk to that building owner and tell them a mural is something they should consider,” Johnson said. But above all, Johnson says she wants art to be accessible to everyone. Johnson said she is trying to stick to projects that benefit “the little guys.” “I’m not trying to go for a project in downtown Raleigh to get the eight-foot-tall building,” Johnson said. “I’m not trying to go to those major cities and get those huge buildings for two reasons: one, I don’t want to go that high; two, my passion really lies with the small guys.” But due to financial constraints and the material reality of art commerce, that requires open communication, she added. “I don’t want to just snowball you with this huge price, and then you just shut me down because it wasn’t what you were thinking,” Johnson said. “At the same time, I am an advocate for the arts, so I’m not going to give you a $10,000 mural when you’re only going to pay $5,000.” There is a healthy balance in explaining the artistic process and working with clients and the surrounding community, Johnson said.“Your municipality invested this, and this is why they invested this, and this is how it’s going to help and improve your community,” she noted. “Same thing when I’m talking to a small business. You asked for me to come at you with this that is outside your budget. How do we make this still your same exact goal, but within your budget lines?” Johnson also provides lessons to aspiring artists. She does so with a mission: how do you master the balance between being a great artist and a competent business owner? “We still do art lessons, but I’m also going to give you business scenarios,” she noted.One of the scenarios she has come up with for her students is a T-shirt competition. “The kids have to think about ‘okay, I can’t just draw whatever I want on a T-shirt. I need to think about what colors Miss Elyse likes. What does Miss Elyse’s logo look like? What would Miss Elyse like?’” Johnson said. “So the design needs to be around that kind of concept.” As Johnson looks toward the future of Van Goat Studios, she is thinking of time, longevity and succession. Johnson is a new mom, which she said has shaped how she sees the future of the studio.“I still want my name and my business out there continuing, so that when my daughter is of age and she can be more independent, then I can be out there doing more and more,” Johnson said. “I would love to get a student to pass this on to, or an intern. I would love for this business to be passed on to the next generation and let them go.”
AI Is Telling Your Future Clients Who You Are. What Is It Saying?
The sources shaping what AI says about your business can influence how future clients and partners see you before they ever make contact.
Business People
Arvest Bank announced it has named Leo Cantu community bank president for the bank's Russellville and Clarksville markets. In his new role, he will provide leadership and day-to-day direction for the bank's operations, serving businesses and organizations throughout Pope and Johnson counties.
Logan Health nurses union ratifies new contract with major across-the-board raises
Nurses at Logan Health in Kalispell say their newest union contract includes "life changing" pay raises that benefit both tenured and new nurses.
Guest opinion: Partisan judges bad for Montana businesses
Partisan money threatens to infect our courts with fickle partisan politics, and that’s bad for business in Montana.
Commentary: Arkansas football takes care of business to bushwhack upstart Tulsa
The positives coach Ryan Silverfield said Arkansas would build on following last week's home loss to Georgia are magnified as the Razorbacks out-gained their visitors by 200 yards in the rout.
Visa (V) Following The UPT Deal Is The Business Payments Story Now Fully Valued
Visa’s UPT partnership puts business payments in focus Visa (V) is back in the headlines after UPT announced it will use Visa’s Currencycloud platform to power virtual EUR and GBP IBANs and real-time foreign exchange for corporate clients. Visa’s share price has cooled slightly in the short term, with the stock down 3.7% over the past month after a solid 7.5% 90 day share price return, while the 1 year total shareholder return of 9.8% and 3 year total shareholder return above 60% point to...
ENTERTAINMENT: Fantasies, folk songs on Festival of the Senses program
Violinist Andrew Irvin, cellist David Gerstein and pianists Jaeyeon Park Hakutani and Naoki Hakutani perform for the opening Festival of the Senses concert Tuesday at St. Luke’s Episcopal Church in North Little Rock.
Intel Panther Lake Teardown, 18A, BSPD, GAAFET, SemiAnalysis STEEL
Panther Lake debuts the first commercial implementation of backside power delivery (BSPDN), introduces Intel’s first iteration of gate-all-around (GAA) transistors, and showcases their advanced packaging capabilities with its Foveros-S assembly. With Panther Lake, Intel’s manufacturing arc has shifted from nebulous roadmaps to shipped silicon, a significant milestone on their long road back to competitive semiconductor manufacturing. To evaluate the extent of Intel’s comeback, we tore down Panther Lake. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Our teardown traces 18A from its four-sheet RibbonFETs (Intel’s marketing name for GAAFETs) and gate stacks through contacts, frontside and backside wiring, and the bonded carrier. We explain how these material and integration choices improve gate control and reduce resistance, while adding capacitance, thermal resistance, and process complexity. Our measurements put Panther Lake’s 18A compute logic and TSMC N3E GPU logic at similar logic density. However, 18A does not lead TSMC N3P, N2 or Samsung SF2 in peak density. Panther Lake’s CPU cores are incremental updates, and the high-end GPU still uses TSMC N3E. Panther Lake assembles one compute tile, one GPU tile, and one I/O tile atop a passive base tile using Intel’s Foveros-S advanced packaging. Both compute tile variants use Intel 18A. The Xe3 GPU options are a 4-core GT1 tile on Intel 3 and a larger 12-core GT2 tile on TSMC N3E. Both I/O tile variants use TSMC N6. [1], [2] Our analysis centers on the PTL-U compute tile, both the 4-core and 12-core GPU tiles, as well as the 12-lane I/O tile. In conventional chips, power and signal are routed through the same frontside metal stack towards the device frontend. Power rails consume scarce routing resources near the transistors, while tall via stacks carry VDD and VSS from the coarse upper wires to local rails. Backside power delivery (BSPD) moves the main power network behind the transistor layer, to the backside, separating it from frontside signal routing. We covered BSPD and its impacts in 2024. [3], [4], [5] Intel’s BSPD implementation, branded as “PowerVia”, routes power through dedicated backside metals to nano-TSVs, which connect those rails to local source/drain (S/D) contacts. Implementing that separation requires Intel to build the interconnect stacks from both sides of the wafer. The frontside comprises the M0-M14 signal stack, while the backside comprises the BM0-BM5 power stack. M0 and BM0 are closest to the transistors. The nano-TSVs connect the two sides, but Intel patterns and etches each via from the front after forming the contacts. A narrow via runs from the side of the contact deep into the silicon substrate. Intel then completes the frontside signal metal stack, bonds the wafer to a carrier, flips it and removes the original substrate until the buried via tips are exposed. The backside metal stack is then deposited directly on the revealed vias. The nano-TSV and backside-via profiles taper in opposite directions because Intel forms them from opposite sides of the wafer. The transistor structures form the FEOL. Local contacts and nano-TSVs connect them to the wiring. M0 begins the frontside interconnect stack. The silicon carrier remains attached above the frontside interconnects. It supports the device wafer during substrate removal and backside processing and remains part of the finished chip’s thermal path. PowerVia removes the main power distribution from the congested frontside metals, routing supply through shorter and wider backside wires. Its lateral landing still occupies area in the standard cell, so it recovers less cell area than a direct backside contact. [3] Nano-TSVs beside the logic devices carry VDD or VSS from the backside power network, while signal connections continue upward through the frontside metals. Backside Interconnects Samsung SF2 data is included for comparison to Panther Lake’s within this article. SF2 is the incumbent GAA foundry node but lacks BSPD, serving as a useful reference to evaluate 18A. A full teardown of Samsung’s S26 products, processed on SF2, will be shared soon.Nanosheet-cut EDS comparison. The PowerVia supply path runs from the backside Cu rails through Mo-lined W nano-TSVs to the local transistor contacts. In this cross section, the tapered connection spans roughly 150 nm from the contact level to BM0. The Ta liner confines Cu and promotes adhesion to the surrounding stack; the AlOₓ etch stop controls the next dielectric etch above the rail. Dielectric beneath the ribbons electrically separates the devices from the backside wiring and removes the conducting silicon body below the channel. [6] AlOₓ serves as an etchstop (ES), enabling endpointing and protecting the underlying layers. Low-volatility aluminum fluoride reaction products resist the fluorinated plasma, allowing a thin AlOₓ film to protect the metal while the surrounding low-k dielectric is removed. [6], [7]. While the BM0 and layers above the M1 lines show double AlOx layers, Our SMIC N+3 teardown showed single AlOₓ layers. SMIC uses a simpler local AlOₓ substack, while the remaining cap and etch sequence provide the required landing protection. So why double layers? The closely spaced AlOₓ doublets provide two protected endpoints in the etch sequence. Intel documents an AlOₓ/SiN/AlOₓ stack that explains the benefit. The main dielectric plasma etch stops on the first AlOₓ film; a selective wet clear opens that film; a second plasma etch removes the intermediate SiN and stops on the second AlOₓ film. The final wet clear exposes the metal landing surface. SiN is the intermediate dielectric in Intel’s published example. [8] The second stop protects the metal through a cap breakthrough. Wide openings can etch faster than narrow ones, and etch depth varies across the wafer. Metal under an early-clearing opening would otherwise be exposed while other openings still need more etching. Staged protection widens the process window and reduces metal erosion, corrosion and void formation. [8] TSMC documents AlN/AlOₓ/SiOC/AlOₓ above Cu, with AlN blocking Cu diffusion, and a simpler AlN/SiOC/AlOₓ variant that omits one AlOx film. [9] Levels with different opening sizes, aspect ratios, pattern densities and cap materials need different etch margins. A double AlOx stop is useful where another protected endpoint justifies the added processing. The extra film adds formation, selective opening and cleaning steps, plus another set of interfaces to control adhesion, moisture, and stress. These blanket films are opened through the existing via pattern, so each film does not require another lithography mask. AlOₓ adds parasitic capacitance when it replaces lower-k dielectric; two thin AlOₓ films can nevertheless contain less AlOₓ than one thick film. Total thickness, placement, and theintermediate dielectric determine the electrical cost. Deposition chemistry also changes AlOx permittivity and residual hydroxyl content, which can oxidize the underlying metal. [7], [8], [10], [11] The backside stack separates into relatively fine BM0-BM2 wiring near the devices and coarser BM3-BM5 power distribution. The largest pitch increase occurs between BM2 and BM3. BM0’s pitch closely matches the logic-row height, fitting local power delivery to the cell rows. Higher levels aggregate current through larger conductors: routing density becomes less important than low resistance and current capacity as the network approaches the package. This hierarchy provides wide power wiring for the power delivery network without consuming scarce frontside signal-routing resources. [3] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Frontside Interconnects Intel 18A combines Mo-lined W contacts and nano-TSVs with a separate backside Cu power network. Samsung SF2 keeps power on the frontside, using Ti-based contact interfaces and Ta-based barriers and Co liners around Cu wiring. In 18A standard-cell rows, backside power rails supply the devices through nano-TSVs within the cells, freeing frontside routing resources. Samsung’s M0 accommodates both power and signal connections. From the device toward M0, the connection runs through a Ti-based S/D interface, W contact fill, a Mo-lined W via, and the Cu M0 wire. Mo supplies a conductive nucleation and adhesion layer for W, replacing the resistive TiN liner used in conventional W integration. This increases the effective conduction volume within the feature while retaining W fill and its established polishing, cleaning and etching processes. Intel’s Mo/W patent describes this integration tradeoff. The nano-TSV uses the same Mo-lined W construction in the backside supply path. [12] The move from TiN to Mo is an incremental change. While a full Co or Mo fill can also reduce the volume lost to liners in very small features, it requires new integration schemes that increase complexity and risk. Cu remains attractive for wider wires due to its low resistance. As wires and vias shrink, the diffusion barrier consumes an increasing fraction of their cross-section. [12], [12], [14] Intel uses Co/Ru liners at M0-M1, Co at M2-M4, and Nb at M5-M9. The lower-level liners help Cu adhere and reduce void formation during trench fills. Applied Materials’ Endura has new thermal control that facilitate wetting process, so the thin film continuity is good enough that good capillary pressure will drive Cu atoms to the via bottom without voiding. Intel’s choice to use Nb is particularly interesting. Intel’s Nb patent describes a conductive diffusion barrier intended to reduce the barrier’s contribution to resistance relative to conventional Ta-based barriers, particularly at via bottoms where all current crosses the barrier. The patent pairs Nb in coarser levels with the option of lower-cost PVD processing. [15], [16] The upper metal layers support thicker barriers formed through physical vapor deposition (PVD) despite its worse coverage and uniformity. Meanwhile, the lower metal layers require thinner barriers deposited through conformal atomic layer deposition (ALD). Co/Ru adds another material interface and requires controlled deposition and Cu fill. Changing liners and barriers by metal layer allows Intel to optimize interconnect resistance, process complexity, and reliability. [15, 16] RibbonFET, Intel’s name for its gate-all-around FETs (GAAFETs), replaces the FinFET’s vertical fins with four stacked horizontal silicon nanosheets, allowing the gate to surround the channel on every side. The path to GAAFET begins with the planar transistor. A planar MOSFET places the gate above the channel between its source and drain. Pairing an NMOS with a PMOS transistor creates a CMOS inverter, in which the NMOS pulls the output low for a high input, and the PMOS pulls it high for a low input. The gate must retain electrostatic control of the channel to ensure clean switching. As gate lengths shrank, the drain began to compete with the gate for that control, increasing off-state leakage. Electrostatic control was restored through an architectural evolution that raised the channel into a vertical fin and wrapping the gate around three sides. Called “FinFET”, this new architecture packed more effective channel width into a smaller footprint. Further scaling made it harder to maintain both drive current and leakage within smaller cells, and reintroduced the same problems planar MOSFETs faced. Nanosheet GAAFETs close the fourth side by replacing the vertical fin with a stack of horizontal nanosheets, each surrounded by the gate. The tighter electrostatic control suppresses leakage at shorter gate lengths while stacking adds effective channel width within the cell footprint. In a FinFET process, channel width changes in discrete steps as designers must add or remove whole fins. Nanosheet width can instead be adjusted continuously within the process’s design rules. Wider sheets increase drive current, while narrower sheets reduce capacitance at the cost of drive current. Intel 18A uses stacks of four nanosheets each and varies their widths across logic and SRAM. At the process level, adding more sheets to each stack increases effective channel width and drive current, but complicates fabrication. RibbonFET vs MBCFET Samsung began GAAFET production in 2022 with SF3E, following with SF3 and now SF2. Its ‘MBCFET’ provides a useful structural comparison with Intel’s first RibbonFET implementation. [17] STEEL is digging deeper into SF2, used in the Exynos 2600, and TSMC’s GAAFET N2, used in Apple’s A20 Pro, in upcoming newsletter articles. We’re throwing some teasers on X. Let’s compare Samsung SF2’s MBCFET with Intel 18A’s RibbonFET. Subscribe Even to the untrained eye, Intel’s extra nanosheet is obvious. Intel stacks four ribbons to Samsung’s three. Samsung’s sheets are much wider in these fields, so both sheet count and width matter to the available channel perimeter. Sheet width also changes which silicon surfaces carry current. On conventional (001) silicon, wide nanosheets emphasize the broad top and bottom surfaces, favoring electron transport; the larger sidewall contribution in a narrow sheet favors hole transport. Thinner sheets improve gate control but increase confinement and scattering. This makes width and thickness part of the NMOS/PMOS balance, alongside strain and threshold voltage. [18], [19] GAAFET designs like 18A use different work-function-metal (WFM) stacks for NMOS and PMOS. Around each ribbon, a thin SiOx interfacial layer separates the silicon channel from the HfOx high-k dielectric, with La providing dipole tuning and the WFM wrapping the dielectric. NMOS uses a TiAl-based stack, while PMOS uses TiN WFM. W fills the remaining gate trench, providing a lower-resistivity path where the work-function layers are no longer needed. In this field, the PMOS stacks leave room for W between ribbons, while the NMOS stacks occupy more of those gaps. A silicon-based dielectric marks the P/N boundary, allowing the PMOS and NMOS gates, sharing the same gate trench, to be processed sequentially. Fast logic paths, retention circuits, and SRAM need a family of threshold options. Changing threshold without substantially changing device dimensions, capacitance or fabrication complexity is valuable. FinFET processes typically use different work-function-metal stacks. In a four-ribbon GAA stack, the narrow sheet-to-sheet gap limits how much WFM can fit around each channel. La in the gate dielectric creates interfacial dipoles at the SiOx/HfOx boundary, shifting effective work function and tuning threshold voltage. This gives Intel another control alongside its NMOS and PMOS WFM stacks. Low-threshold devices improve critical-path drive; higher thresholds reduce leakage elsewhere. Dipole tuning is especially useful in GAA because it changes threshold without consuming the narrow intersheet gap with thicker WFM. Precise control of La incorporation, diffusion and interface quality has long been a challenge, limiting viability in high volume production but is now seen from every leading-edge foundry. Intel’s patent describes depositing a dipole-forming oxide above HfOx and annealing it toward the interfacial oxide before completing the work-function and fill metals. This separates threshold tuning from the space available for metal. Newer research addresses the thermal cost: imec’s 2026 dipole-middle research inserts the shifter between two HfOx depositions, shortening the diffusion path while protecting SiOx during patterning. [20], [21]Matched-cut EDS, Intel 18A (left) vs. Samsung SF2 (right). Intel retains raised source/drain epi beneath its contacts, while Samsung recesses W deep into the epi to form a V-shaped Ti-lined interface. The deeper contact increases metal-to-semiconductor area and shortens the current path from the lower sheets, reducing contact and spreading resistance. It also removes epi volume and brings the contact etch closer to the channel ends. Retaining more epi preserves the material available for strain transfer, especially from SiGe into PMOS. These geometries balance contact access against stress engineering and etch margin. [22], [23] Samsung stacks three sheets to Intel’s four ribbons, and both processes use sheet width to tune drive strength. In our Samsung cross-sections, widths range roughly from 19 to 30 nm in the NPU rows and 37 to 50 nm in the CU cell. The Samsung nanosheets taper, with the widest sheet at the bottom and the narrowest at the top. Both processes use HfOx gate dielectric and Ti-based work-function stacks, with Al in the NMOS stack. In the Samsung devices shown here, the dielectric and WFM occupy the intersheet gaps, leaving W above the top sheet. Intel’s PMOS stack leaves more room between ribbons, and W fills those gaps while the thicker NMOS stack leaves W mainly in the upper trench. Gate-stack EDS maps. The W between Intel’s PMOS ribbons provides a conductive path close to the lower gates. Where WFM fills the entire gap, the gate still surrounds the channel, but voltage reaches it through the more resistive work-function films. Thinner WFM and dipole tuning preserve room for low-resistivity fill; Mo and Ru are alternative fill metals being developed for further scaling. [24] A masked, sequential WFM flow explains the different gate heights and inter-nanosheet fill. The proposed sequence below shows how separate NMOS and PMOS work-function steps produce that geometry. Enabled by the BSPDN process, Intel replaces the dense-logic silicon subfin with dielectric, removing the parasitic conduction path below the ribbons and reducing substrate-related capacitance. A retained silicon body as in classical, non-SOI, planar and FinFET designs needs junction and punchthrough-stop engineering to suppress leakage. Dielectric isolation makes that leakage less sensitive to the subfin doping profile but adds removal and fill steps. It also weakens the direct thermal path through silicon, making the contacts, metal stacks and package more important for heat extraction. [24], [26] Fluorine is concentrated around selected Intel device structures in the maps. WF6 is a standard precursor for W nucleation and fill, while barrier films protect adjacent dielectrics from fluorine attack. Low-fluorine W processes reduce the residual-F burden. Chloride-based precursors avoid introducing F during W deposition, but require control of chlorine attack, nucleation and fill quality. The integration target is a continuous, low-resistance W path with a thin protective liner and minimal chemical damage to the surrounding stack. [20], [27], [28] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. We measured cell height, gate pitch, metal geometry, and ribbon dimensions at the XTEM sites shown below. The tables group these dimensions by site and device polarity. Our “sheet cuts” cross the silicon channel and show the ribbons end-on. “gate cuts” run along the channel through successive gates. The 18A logic cell dimensions point to a five-track logic library while the N3E and Intel 3 cell dimensions evidence a seven-track logic library. The DDR-PHY uses wider M0 wires and much larger spacing than core logic. That trades routing density for lower wire resistance and weaker coupling between neighboring nets. The geometry suits the current delivery and coupling requirements of analog, clock, and I/O circuitry. PowerVia lets 18A combine a compact cell height with wider M0 geometry by moving the main power rails off the signal-routing tracks. That relaxes local wire scaling while preserving a small cell footprint. Cell height and gate pitch set the geometric density; pin access and routability determine how much of it a real block can use. [29] The biggest takeaway from our gate-pitch measurements is that Intel 18A compute logic and TSMC N3E GPU logic have similar density in the Bohr representative-cell model. The 18A example is 18.6% denser than the Intel 3 GPU example. Gate pitches are nearly identical across the three sites, so cell height drives most of the difference. The Bohr model combines a four-transistor NAND2 spanning three gate pitches and a 32-transistor scan flip-flop (SFF) spanning nineteen pitches, weighting their densities 60:40. The sensitivity column shows how independently changing cell height and gate pitch by ±1 nm changes the result. This compares representative cell geometries; whole-die density also depends on cell mix and placement. The 18A P-core gives M0 substantially more metal cross section than the N3E vector engine. Treating each profile as a trapezoid gives 2.63 times the area per line and 1.84 times the area after normalization by routing pitch. The larger section reduces the geometric contribution to line resistance and lowers current density for a given current. Taller and wider wires also add capacitance, so circuit delay depends on the balance of resistance and capacitance. The DDR-PHY has less metal area per routing width than the 18A core fields, while remaining above N3E. [30] Area = height × (top CD + bottom CD) / 2, including liners. Area/pitch normalizes by routing width. Taper is the symmetric sidewall angle from vertical, with the largest angle belonging to the DDR-PHY. Compute tile The measurements show how ribbon dimensions and gate-stack geometry vary across the compute tile and between NMOS and PMOS to balance channel drive, gate load and the space needed for the dielectric/WFM stack across logic, SRAM and the DDR-PHY. Width mainly changes available channel perimeter; thickness also changes electrostatic control and carrier confinement. Gate-stack thickness then determines the space left for low-resistivity fill P-core and LP E-core logic Both the P-core and LP E-core use multiple nanosheet widths. Widths are measured on high-magnification XTEMs while wider-field images demonstrate additional width choices within the LP E-core. Multiple widths are expected even within an LP E-core. Timing-critical paths, buffers and cells with different fanout need different drive strengths. The lower-magnification fields show this width diversity beyond the sites quantified in the table. L2 and L3 SRAM GAA gives SRAM designers another way to balance the pull-up (PU), pass-gate (PG), and pull-down (PD) transistors. FinFET bitcells set device strength through fin count while GAA adds nanosheet width as a sizing knob. In a 6T SRAM cell, a strong pull-down relative to the pass-gate limits read disturbance, while a strong pass-gate relative to the pull-up improves writability. During a write, the pass-gate and write driver pull the node storing “1” below the inverter trip point. During a read, the pull-down holds the node storing “0” low. Bias, threshold voltage, mismatch and assist circuitry set the remaining margin. FinFET high-current cells commonly use a PU:PG:PD fin-count pattern of 1:2:2, a device-sizing ratio rather than a current ratio. Ribbon width lets Intel balance SRAM strengths without adding whole fins. The L2 cell uses its narrowest ribbons for PU and widest for PD, improving writability and read stability respectively. Intel’s disclosed HCC operates without assist; its denser HDC uses negative-bitline write assist. Pulling the selected bitline briefly below ground increases pass-gate overdrive so it can overpower the pull-up at lower supply voltage. That buys density and low voltage writability at the cost of boosting circuitry, switching energy, and additional voltage stress that must be controlled. [31], [32] Four rectangular ribbons give the perimeter = 8 × (width + thickness), before corner rounding. PG/PU is 1.49 and PD/PG is 1.16. The L3 structures closely resemble L2 in layout and cell height. Fewer L3 nanosheet widths are tabulated because fewer high-magnification images were available. DDR PHY The DDR-PHY trades density for controlled analog behavior and reliable off-chip signaling. It contains drivers, receivers, delay circuits, and calibration logic that set drive strength, sampling time, and voltage margin. Repeated four-sheet devices with similar widths fit the use of regular transistor units for matching and programmable drive. Its wider local wiring provides room for current delivery and separation of sensitive signals, while consuming more area than a dense core-logic grid. The layout serves the memory channel’s electrical requirements as well as digital logic density. [33] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Intel 3 GPU devices Vector engine logic Intel 3’s XVE logic uses two-fin PMOS and NMOS devices with power rails in M0. Its cell height and M0 pitch give a seven-track geometry, two tracks more than the 18A logic. One-fin groups also appear among the two-fin devices. Intel 3 L2 SRAM The Intel 3 L2 SRAM uses the familiar HCC sizing pattern: one PU fin, two PG fins, and two PD fins. N3E GPU devices Vector engine logic The N3E XVE field contains repeated two-fin devices with seven-track cell geometry. N3E remains a FinFET process, giving Panther Lake a direct FinFET-to-RibbonFET comparison. N3E L2 SRAM The N3E L2 SRAM uses the same PU:PG:PD fin-count pattern of 1:2:2. Panther Lake-U follows Lunar Lake’s floorplan quite closely. Both pair 4 P-cores with 4 LP E-cores and NPU, media and display engines in similar locations. Lunar Lake also uses Xe2, the direct predecessor to Panther Lake’s Xe3 GPU. This makes Lunar Lake the most direct basis for our comparisons. Arrow Lake differs in core count and uses the older Xe-LPG GPU architecture, so we only use it where it offers a more direct component-level comparison. Compute tile Panther Lake compute-tile floorplans remain sparse even months after launch. Intel 18A’s backside metal and dielectric stack must be removed without damaging the underlying structures before a clean transistor-level floorplan can be imaged. Most published die shots hide or heavily process the background, but we are quite proud of the die shot we achieved and are excited to show the work we have done. We measured the areas of the key components on the compute tile and compared them with their Lunar Lake predecessors on TSMC N3B. These help us to capture changes in block area and compare the two chips across process nodes and designs. Our total tile areas exclude the scribe-line area. The compute-plus-GPU subtotal below uses the PTL-U compute tile and GT1 GPU; it excludes the I/O tile and passive base. Individual block areas use the boundaries marked on the floorplans The compute-plus-GPU row is recomputed from the displayed PTL-U and GT1 areas. Component rows use their stated per-region counts and are not an additive partition of the whole tile. The P-core area remains almost unchanged between Lunar Lake and Panther Lake, despite L2 capacity increasing from 2.5 MiB to 3 MiB. Arrow Lake uses the same Lion Cove core as Lunar Lake but also has a 3 MiB L2. Cougar Cove fits 20% more L2 into the same P-core area. The larger private cache keeps more of each core’s working set close to its execution units, reducing access to shared L3 and DRAM. Extra capacity adds storage leakage and lookup energy, so designers balance it against avoided lower-level accesses. The shared P-core L3 cache also shrank by 14.8%. [2] Cougar Cove combines a similar footprint with Intel’s reported power-efficiency improvements. RibbonFET’s tighter channel control reduces leakage, while PowerVia reduces supply droop and allows tighter voltage guardbands. [1] Darkmont’s four-core LP E-core cluster is 5.0% smaller than Skymont’s on Lunar Lake, with most of the reduction in its L2 regions. The 1 MiB region shrank by 8.4% and the 1.5 MiB region by 14.9%. The tag arrays also use one fewer visible row. Tags identify which memory addresses the data array holds, so rearranging them changes the cache’s layout and wiring without requiring less data capacity. [2] The LP E-cores share one L2. This pools capacity and avoids duplicating all the cache machinery, but the four cores contend for its banks and bandwidth. Their separate cluster also keeps light work away from the performance cluster and its L3, allowing that larger domain to sleep. [1], [2] Cache area includes more than the storage cells. Tags identify each line, decoders select rows, sense amplifiers read the small bitline signal, and wires connect to the banks. Splitting an array into smaller sections shortens wordlines and bitlines, improving access speed, but duplicates peripheral circuits. Panther Lake’s smaller cache regions therefore reflect the complete memory implementation, including how much of each region is devoted to storage. [34] Unlike Meteor Lake and Arrow Lake, Panther Lake has no separate SoC tile. The NPU, LP E-cores, memory controllers, PHYs, media and display engines now share the compute tile. This removes an active die and keeps CPU memory traffic on one die. The cost is moving PHY and I/O-related circuitry onto 18A: drivers, receivers and analog circuits must still meet external voltage, loading and signal-integrity requirements, so their area does not shrink like dense digital logic. [1], [2] The biggest shrink comes from the NPU, which occupies 36.9% less area. NPU 5 consolidates the same total INT8 MAC count into half as many neural compute engines. Each of the three NCEs has a larger MAC array to make the complete NCE envelope 22.6% larger than an NPU 4 engine. Consolidation also halves the number of scratchpads and SHAVE DSPs, from 12 to 6. The MAC array handles matrix multiplication and convolution, while SHAVE executes vector and custom operations that fit the array poorly. [1], [2], [35] The paired floorplans identify each NCE envelope and its scratchpad, MAC, and SHAVE regions. Each measured MAC polygon is counted once per NCE in the area accounting below. The scratchpads store weights, activations, and intermediate results near the MAC arrays, allowing repeated use without fetching them again from DRAM. Halving their number delivers the largest measured area saving but leaves less local storage for the same total MAC count. Layers that no longer fit locally require smaller working tiles or more transfers of intermediate data. The benefit depends on keeping the enlarged arrays busy while managing that tighter storage budget. [36] NPU 5 also adds native FP8. Using half the operand width of FP16 reduces storage and transfer demand, helping workloads fit the smaller local memory budget. Lower precision and format-dependent range make scaling and model validation part of deployment. Hardware activation functions further reduce work that would otherwise occupy the programmable DSPs. [1], [2] Microsoft requires an NPU to deliver at least 40 TOPS for Copilot+ PCs. Both Lunar Lake and Panther Lake meet this threshold, but Panther Lake uses significantly less silicon. GPU tiles Panther Lake is Intel’s first product with Xe3, its latest GPU architecture. It offers two different GPU tiles: a smaller GT1 tile with 4 Xe3 cores on Intel 3 and a larger GT2 tile with 12 Xe3 cores on TSMC N3E. Panther Lake allows us to compare the same GPU architecture across both Intel 3 and TSMC N3E. Wildcat Lake adds a third Xe3 implementation on Intel 18A. A future newsletter will detail Xe3 and its implementation differences across all three process nodes. GT2 scales Xe3 to a different physical layout, with render slices arranged vertically instead of GT1’s horizontal arrangement. Slice placement sets the distances to shared cache banks and the D2D interface. Those wires consume area and add delay, so scaling the number of Xe cores also requires a new balance of cache placement, routing and timing. [1] What’s immediately obvious is that the GT2 tile on TSMC N3E has much smaller Xe cores than GT1. These block areas include logic, caches, and routing. An Xe core on the GT1 tile is ~69% larger than one on Lunar Lake, and ~55% larger than one on GT2. Intel 3 therefore uses substantially more area per Xe core. The block-area gap exceeds the measured logic and SRAM density gaps, bringing routing, timing targets, cell mix, and floorplan allocation into the comparison. The measured vector/matrix engine region is almost unchanged between Lunar Lake and Panther Lake’s GT2 tile. Xe3 retains eight 512-bit vector engines and eight 2048-bit XMX engines per core. Its gains also come from feeding those engines more effectively: more resident threads hide stalls, and variable register allocation lets shaders trade registers per thread against the number of threads kept active. [1] The shared L1/SLM capacity increased by 33% from 192 KiB to 256 KiB, while its area increased only 5%, raising effective density by 27%. L1 retains reused cache lines, while software-managed SLM lets a thread group share data locally. Both reduce traffic to more distant memory. Allocating more SLM per group can also limit how many groups reside on a core at once. [1], [37] The GT1 tile carries 4 MiB of L2 against 16 MiB on the GT2 tile. GT1 divides its L2 cache into four 1 MiB banks, while GT2 uses eight 2 MiB banks. Each bank contains 128 macros, but each N3E macro stores 16 KiB, twice the Intel 3 macro’s 8 KiB capacity. The N3E macro is only 54% larger while holding twice as many bits, giving it 30% higher density: ~23.7 Mbit/mm² versus 18.3 Mbit/mm². Including bank-level circuitry, the gap widens to ~16.9 Mbit/mm² on GT2 versus ~10.4 Mbit/mm² on GT1. GT2 gains density with its macros storing more bits per unit area, and those macros occupy more of each cache bank. Larger macros spread decoder and sense-amplifier overhead across more storage, while a more compact bank layout reduces the share spent on control and routing. The compromise is longer wordlines and bitlines that carry more capacitance. [34] I/O tile Panther Lake uses two I/O tile variants, both fabricated on TSMC N6. The smaller one provides 4 PCIe 5.0 and 8 PCIe 4.0 lanes and serves lower-tier systems as well as those without a discrete GPU, while the larger one adds 8 PCIe 5.0 lanes, bringing the total to 20 lanes, for discrete-GPU connectivity. Panther Lake SKUs with the larger 10- or 12-Xe GPUs use the smaller I/O tile. [38] The smaller I/O tile adds a PCIe 4.0 block and a Thunderbolt block to Lunar Lake’s I/O layout, providing four additional PCIe 4.0 lanes and another Thunderbolt 4 port. Its repeated N6 blocks retain nearly identical areas and layouts. Reusing these proven PHYs and controllers avoids porting and requalifying external interfaces on 18A, where faster digital logic offers less benefit to circuits constrained by the off-chip link. [38] SemiAnalysis’s teardown lab (STEEL) dives deep into the world’s advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. We’re hiring technical experts from system to transistor and everywhere in between. Check out our Careers page. Panther Lake offers scalability and modularity through its disaggregated packaging that partition compute, GPU, and I/O silicon into separate tiles allowing for a suite of tile configurations. This partitioning makes the package part of Intel’s node economics as it determines how much leading-edge wafer area each product consumes, which functions can remain on other processes, and how much configuration freedom Intel can offer from a shared set of tiles. Furthermore, fabricating the compute and GPU tiles separately confines the new 18A process to the compute tile and allows graphics and I/O to use other, more established, and more cost-effective processes. For Panther Lake, the GPU and I/O tiles are assembled alongside the compute tile on a passive silicon base using Foveros-S. Intel’s current technology brief lists a nominal 36 µm pitch for Foveros-S. Through-silicon vias (TSVs) in the base connect the fine wiring above to the larger package connections below. The functional tiles sit side by side on that passive base in a 2.5D configuration. [39] Our cross-section through the compute and GPU tiles shows the package’s wiring hierarchy. Microbumps connect each active tile to the passive silicon base; its fine redistribution layer (RDL) carries the short, dense tile-to-tile links. TSVs carry connections through the base to the package substrate, which fans them out to the much coarser motherboard solder joints. The base supplies interconnect, while computation remains in the active tiles above it. [39] At the compute-tile edge, the higher-magnification inset shows a local microbump spacing of approximately 25.24 µm and a feature width of 12.33 µm. These local spacings are finer than Intel’s nominal Foveros-S value. The X-ray fields further confirm tighter neighboring bumps, consistent across every die-to-die area found on each tile. Additional X-ray analysis is offered after the paywall. Putting the memory controller beside the CPU removes the D2D transfer that CPU memory requests required in Meteor Lake and Arrow Lake. This avoids the extra transmitter, receiver, and link traversal, saving interface energy and latency. Panther Lake’s separate GPU still crosses a D2D link to reach DRAM, so its larger local caches also help contain package traffic. [1], [40] Smaller dies are less likely to contain a random fatal defect, and screening them before assembly prevents one bad tile from consuming a complete package of good silicon. Reuse also spreads design and qualification work across more products. Against those gains, Intel pays for the passive base, D2D circuits, extra bonding and test steps, and losses during assembly. Cost per working product across the portfolio captures the combined effect of wafer yield, reuse, test, and assembly. [29] Wildcat Lake packaging Intel launched Core Series 3, formerly Wildcat Lake, on 16 April 2026 for value mobile and edge systems. Wildcat Lake keeps 18A but removes the passive base and combines more functions on one die to simplify the package. The two products therefore reveal two distinct ways to commercialize the same leading-edge process. [41] Wildcat Lake’s 18A die combines up to two Cougar Cove P-cores, four Darkmont LP E-cores, two Xe3 cores and a smaller NPU. A separate platform-controller die supplies I/O, connected through UCIe, Intel’s first processor implementation of the standard. Consolidating graphics remove a tile boundary and the passive base, reducing assembly complexity for a modest-bandwidth value product. It also ties CPU and graphics scaling to the same die, giving up Panther Lake’s ability to swap in a much larger GPU. [42], [43] In July 2021, Intel CEO Pat Gelsinger set out an ambitious process roadmap aimed at regaining performance leadership by 2025, later described as five nodes in four years. Five years and one CEO later, Intel’s comeback story is not as unambiguously positive as Pat may have hoped. [44], [45] Intel once set the pace for process technology, bringing high-k metal gate technology and FinFETs into volume production years ahead of the rest of the industry. Its 22 nm FinFET process reached consumers with Ivy Bridge in 2012. [46] Intel’s integrated device manufacturing (IDM) model allowed its architects and process engineers to co-optimize products and processes. Starting with Sandy Bridge, Intel dominated x86, while AMD struggled with Bulldozer. That lead faltered at 14 nm and broke at 10 nm. Intel targeted a massive 2.7× density increase, but the node arrived years late and required several revisions before it could support Intel’s full lineup. This delay forced Intel to stretch 14 nm across six generations, while TSMC moved ahead in process technology and AMD recovered in x86. By 2019, Intel was still shipping 14 nm across most of its product stack, with its 10 nm client ramp focused on Ice Lake mobile processors. Meanwhile, TSMC was shipping N7 and N7+, and AMD’s Zen 2 compute chiplets used N7 to raise core counts and improve efficiency. Intel’s process failures were central to its decline, but unsound business decisions furthered their downward slide. Product delays compounded product mistakes, pushing client, server, and FPGA roadmaps off schedule. Several attempts to enter AI (Nervana and Gaudi) and networking (Tofino) also failed to establish lasting businesses. Intel’s recovery has focused on consumer CPUs and advanced packaging. Tiger Lake, Alder Lake, Lunar Lake and now Panther Lake have restored Intel’s consumer roadmap. On the process side, Intel 4 shipped with Meteor Lake, Intel 3 with Granite Rapids and Sierra Forest, and Intel 18A with Panther Lake. Intel has also made advanced packaging part of its foundry offering. However, Intel is still playing catch-up in servers. Several Xeon generations arrived years late and trailed contemporary AMD and Arm server CPUs in performance, efficiency, and core count. The process roadmap is back, but Intel does not hold the same process-technology leadership position it held prior to 10 nm. The introduction of gate-all-around nanosheets and backside power delivery are two of the biggest changes to transistor integration in a decade. Intel took on both changes at once: 18A paired its first RibbonFET with PowerVia in Panther Lake. Panther Lake is a substantial manufacturing milestone. Our cross-sections show how RibbonFET and PowerVia reshape local contacts and wiring, while the floorplans show where architectural consolidation and process choices save area. A sustained competitive lead depends on product performance, cost, yield, and the next implementation. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page.. [1] Intel, “Intel Tech Tour 2025 Panther Lake recap,” Doc. 866361, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/866361/ITT_2025_Panther_Lake_Recap1.pdf [2] Intel, “Core Ultra processors Series 3 datasheet, volume 1,” Doc. 872188-001, Jan. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/872188/872188-001.pdf [3] N. Horiguchi and E. Beyne, “Backside power delivery: How to power chips from the backside,” imec Reading Room, Nov. 25, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/how-power-chips-backside [4] W. Hafez et al., “Intel PowerVia technology: Backside power delivery for high density and high-performance computing,” in Proc. IEEE Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2023, pp. 1–2, doi: 10.23919/vlsitechnologyandcir57934.2023.10185208. [5] K. Fischer et al., “Intel 18A platform technology featuring RibbonFET (GAA) and PowerVia for advanced high-performance computing,” in Proc. Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2025, pp. 1–3, doi: 10.23919/vlsitechnologyandcir65189.2025.11075006. [6] K.-F. Cheng, C.-L. Teng, H.-Y. Huang, and H.-C. Chen, “Metal oxide composite as etch stop layer,” U.S. Patent 12 176 247 B2, Dec. 24, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12176247B2/en [7] S. W. King, “Dielectric barrier, etch stop, and metal capping materials for state of the art and beyond metal interconnects,” ECS J. Solid State Sci. Technol., vol. 4, no. 1, pp. N3029–N3047, 2015, doi: 10.1149/2.0051501jss. [8] A. V. Mule’, D. J. Towner, D. Seghete, C. R. Ryder, and A. A. Gonzalez, “Multi-layer etch stop layers for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20220102343 A1, Mar. 31, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20220102343A1/en [9] C.-C. Wang and J. H. Wang, “Interconnect structure with dielectric cap layer and etch stop layer stack,” U.S. Patent Appl. 20230253247 A1, Aug. 10, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20230253247A1/en [10] Y. J. Wu, K.-F. Cheng, C.-C. Lee, H.-K. Chang, and H.-Y. Huang, “Etch stop layer for interconnect structures,” U.S. Patent Appl. 20240332070 A1, Oct. 3, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240332070A1/en [11] M. G. Rainville, N. Shankar, K. S. Reddy, and D. M. Hausmann, “Deposition of aluminum oxide etch stop layers,” U.S. Patent Appl. 20180197770 A1, Jul. 12, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20180197770 [12] J. S. Leib et al., “Conductive lines having molybdenum liner and tungsten fill for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20240429126 A1, Dec. 26, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20240429126 [13] M. Naik, “Cobalt enables power and performance scaling at single-digit logic nodes,” Applied Materials, Dec. 17, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://www.appliedmaterials.com/us/en/blog/blog-posts/cobalt-enables-power-and-performance-scaling-at-single-digit-logic-nodes.html [14] Lam Research, “Breaking through AI’s invisible barrier with molybdenum,” Lam Research Newsroom, May 6, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://newsroom.lamresearch.com/molybdenum-metallization-ai-revolution [15] P. Yashar, G. Malyavanatham, and H. Vijwani, “Integrated circuit interconnect structures with niobium barrier materials,” U.S. Patent Appl. 20240112951 A1, Apr. 4, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240112951A1/en [16] Applied Materials, “Applied Materials unveils chip wiring innovations for more energy-efficient computing,” Applied Materials Investor Relations, Jul. 8, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://ir.appliedmaterials.com/news-releases/news-release-details/applied-materials-unveils-chip-wiring-innovations-more-energy [17] Samsung, “Samsung showcases AI-era vision and latest foundry technologies at SFF 2024,” Samsung Semiconductor, Jun. 13, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://semiconductor.samsung.com/news-events/news/samsung-showcases-ai-era-vision-and-latest-foundry-technologies-at-sff-2024/ [18] C. W. Yeung et al., “Channel geometry impact and narrow sheet effect of stacked nanosheet,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2018, pp. 28.6.1–28.6.4, doi: 10.1109/iedm.2018.8614608. [19] S. Mochizuki et al., “Evaluation of (110) versus (001) channel orientation for improved nFET/pFET device performance trade-off in gate-all-around nanosheet technology,” in Proc. Int. Electron Devices Meeting (IEDM), Dec. 2023, pp. 1–4, doi: 10.1109/iedm45741.2023.10413854. [20] D. G. Ouellette et al., “Fabrication of gate-all-around integrated circuit structures having molybdenum nitride metal gates and gate dielectrics with a dipole layer,” U.S. Patent 12 051 698 B2, Jul. 30, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12051698B2/en [21] imec, “Advancing the CFET-based device roadmap with novel integration modules and standard-cell architectures,” imec, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/advancing-cfet-based-device-roadmap-novel-integration-modules-and-standard-cell [22] A. Reznicek, X. Miao, C. Lee, and J. Zhang, “Wrap around contact for nanosheet source drain epitaxy,” U.S. Patent 11 302 813 B2, Apr. 12, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US11302813B2/en [23] J. A. Kittl, J. G. Hong, D. R. Palle, and M. S. Rodder, “Methods for varied strain on nano-scale field effect transistor devices,” U.S. Patent 9 978 833 B2, May 22, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9978833B2/en [24] S. Gandikota et al., “Method of reducing metal gate resistance for next generation NMOS device application,” Int. Patent Appl. WO 2024/137272 A1, Jun. 27, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/WO2024137272A1/en [25] J. Zhang et al., “Full bottom dielectric isolation to enable stacked nanosheet transistor for low power and high performance applications,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2019, pp. 11.6.1–11.6.4, doi: 10.1109/iedm19573.2019.8993490. [26] C. Yoo, J. Chang, Y. Seon, H. Kim, and J. Jeon, “Analysis of self-heating effects in multi-nanosheet FET considering bottom isolation and package options,” IEEE Trans. Electron Devices, vol. 69, no. 3, pp. 1524–1531, Mar. 2022, doi: 10.1109/ted.2022.3141327. [27] S. S. Pradhan, D. B. Bergstrom, J.-S. Chun, and J. Chiu, “Tungsten gates for non-planar transistors,” European Patent Appl. EP 3 506 367 A1, Jul. 3, 2019. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/EP3506367A1/en [28] L. Schloss and X. Ba, “Tungsten films having low fluorine content,” U.S. Patent 9 754 824 B2, Sep. 5, 2017. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9754824B2/en [29] Intel Foundry, “Accelerating AI and HPC with advanced process and packaging technologies,” Doc. 367370-001US, Jun. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-11/intel-foundry-hpc-ai-brief.pdf [30] M. Lofrano, X. Chang, H. Oprins, and Z. Tokei, “Mitigating the thermal bottleneck in advanced interconnects,” imec, Sep. 28, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/mitigating-thermal-bottleneck-advanced-interconnects [31] S. Bair, “Intel at ISSCC 2025: Navid Shahriari invited talk, eight papers, forums, panelist & product details,” Intel Community, Feb. 19, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://community.intel.com/t5/Blogs/Tech-Innovation/Edge-5G/Intel-at-ISSCC-2025-Navid-Shahriari-Invited-Talk-Eight-Papers/post/1667592 [32] D. Chandra, E. Potladhurthi, D. R. S. Reddy, and K. S. Rengarajan, “Tunable negative bitline write assist and boost attenuation circuit,” U.S. Patent Appl. 20160203857 A1, Jul. 14, 2016. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20160203857A1/en [33] Synopsys, “Advantages of firmware-based training in high-speed DDR IP,” Synopsys IP Technical Bulletin. Accessed: Sep. 14, 2026. [Online]. Available: https://www.synopsys.com/articles/firmware-based-training-ddr-ip.html [34] N. Muralimanohar, R. Balasubramonian, and N. P. Jouppi, “CACTI 6.0: A tool to understand large caches,” Hewlett-Packard Laboratories, 2009. Accessed: Sep. 14, 2026. [Online]. Available: https://users.cs.utah.edu/~rajeev/cacti6/cacti6-tr.pdf [35] Intel, “Intel Tech Tour 2024 Lunar Lake AI hardware accelerators,” Doc. 824436, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/824436/2024_Intel_Tech%20Tour%20TW_Lunar%20Lake%20AI%20Hardware%20Accelerators.pdf [36] Y.-H. Chen, J. Emer, and V. Sze, “Eyeriss: A spatial architecture for energy-efficient dataflow for convolutional neural networks,” in Proc. 43rd ACM/IEEE Annu. Int. Symp. Comput. Archit. (ISCA), Jun. 2016, pp. 367–379, doi: 10.1109/isca.2016.40. [37] Intel, “Introduction to the Xe-HPG architecture,” Doc. 758306, Nov. 4, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/developer/articles/technical/introduction-to-the-xe-hpg-architecture.html [38] Intel, “Core Ultra processors Series 3 for the edge,” Doc. 855291. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/855291/Intel%C2%AE%20Core%E2%84%A2%20Ultra%20Processors%20Series%203%20for%20Edge%20Overview_2.pdf [39] Intel Foundry, “Foveros technology brief,” Doc. 366411-001US, Feb. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-07/foveros-25d-product-brief.pdf [40] D. Das Sharma, “UCIe: Building an open chiplet ecosystem,” UCIe Consortium, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.uciexpress.org/_files/ugd/0c1418_c5970a68ab214ffc97fab16d11581449.pdf [41] Intel, “Intel launches Intel Core Series 3 processors,” Intel Newsroom, Apr. 16, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-launches-intel-core-series-3-processors-changing-the-game-for-everyday-computing.html [42] Intel, “Core Series 3 launch press deck,” Apr. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://download.intel.com/newsroom/2026/Intel-Core-Series-3/Intel-Core-Series-3-Launch-Press-Deck.pdf [43] Intel, “Intel outlines architectures for agentic AI at Hot Chips 2026,” Intel Newsroom, Aug. 24, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-outlines-architectures-for-agentic-ai-at-hot-chips-2026.html [44] Intel, “Intel accelerates process and packaging innovations,” Intel Investor Relations, Jul. 26, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/filings-reports/all-sec-filings/content/0001193125-21-224438/d199788dex991.htm [45] Intel, “Intel reports third-quarter 2021 financial results,” Intel Investor Relations, Oct. 21, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/1505/intel-reports-third-quarter-2021-financial-results [46] Intel, “3rd generation Intel Core processors bring exciting new experiences and fun to the PC,” Intel Investor Relations, Apr. 23, 2012. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/577/3rd-generation-intel-core-processors-bring-exciting
As A.I. Makes Law Firms More Efficient, Clients Ask: ‘Where’s My Discount?’
There’s growing pressure to move beyond the billable hour. But big firms aren’t ready to blow up their trusted business model.
Overreliance on AI could replace 'social intelligence' in the workplace, protocol expert warns
Pamela Eyring warns that AI's convenience is eroding critical people skills, and businesses that fail to balance automation risk losing clients and money.
NWA EDITORIAL | Region’s business behemoths, families keep investing in Northwest Arkansas
They could be called fly-on-the-wall meetings. After all, we'd imagine when billionaire individuals and billionaire companies get together to chat about taking a big step, it's bound to be interesting.
Stockton ethics commission, political consultant registry headed for broader council review
Proposed reforms would require campaign consultants to disclose their clients and establish an independent body to investigate ethics complaints, but questions remain about costs and oversight.
ProTributeBands.com Clarifies Direct Booking Model for Corporate Event Entertainment Planners
SAN RAMON, CA - September 25, 2026 - PRESSADVANTAGE -ProTributeBands.com, the curated booking and lead generation platform for high-end tribute bands, has outlined how its direct-booking structure works for event planners seeking corporate event entertainment. Under the model, bands featured on the platform negotiate terms and close each booking directly with the client, while ProTributeBands follows up to keep the transaction moving smoothly.The structure separates ProTributeBands.com from traditional booking agencies that insert themselves into every contract. Rather than acting as an intermediary that controls the final agreement, the platform connects event planners, performing arts centers, festivals, wedding clients, and private party hosts with pre-screened, national-act-caliber tribute acts, then steps back so the parties can settle details themselves. The platform maintains contact with both sides to ensure momentum is not lost during the process.Founded by David Victor, former guitarist and co-lead vocalist of the multiplatinum band BOSTON, ProTributeBands.com features tribute acts covering artists such as Queen, The Beatles, ABBA, Journey, The Eagles, and Pink Floyd. Selected bands receive optimized profile pages and booking leads generated through the platform."Event planners often assume a booking platform means another layer of negotiation and markup," said David Victor, Founder of ProTributeBands.com. "The approach here is different. The bands negotiate terms and close each booking directly, which keeps the conversation honest and the details accurate. The platform stays involved by following up so nothing stalls between the first inquiry and the signed agreement."The direct-booking method reflects how corporate and private event planning typically operates. Planners frequently need to confirm technical requirements, stage dimensions, scheduling, and performance specifics with the people who will actually be on stage. By allowing those conversations to happen between the client and the band, the model aims to reduce miscommunication that can occur when information passes through a third party.ProTributeBands.com applies a screening process before an act appears on the platform, focusing on production quality, musicianship, and readiness for larger venues. The company ranks tribute bands across categories including Queen, The Beatles, The Eagles, Journey, Pink Floyd, and BOSTON tributes, drawing on performance quality and audience response.The ProTributeBands guide to hiring a tribute band offers additional context for planners weighing these decisions, covering topics such as understanding the audience and event, assessing entertainment value, viewing an act in person before hiring, and reviewing rider and insurance requirements. The guide addresses the practical considerations planners face when selecting an act for a corporate function, festival, or private celebration."A tribute production for a corporate audience has to hold the room the same way a headline act would," Victor said. "The vetting exists so planners can trust that the act they see listed can deliver at that level, and the direct-booking structure lets them confirm every detail with the band before committing."ProTributeBands.com serves clients across the United States and abroad, working with tribute acts that perform at performing arts centers, summer concert series, product launches, corporate parties, private parties, and wedding receptions. The platform also accepts artist submissions from tribute bands seeking consideration for inclusion. The company operates online at protributebands.com.###For more information about ProTributeBands.com, contact the company here:ProTributeBands.comDavid Victor(925) 236-0217hello@protributebands.com11040 Bollinger Canyon Road Suite E-938, San Ramon, CA 94582
Bella Vista Business Association votes to become Bella Vista Chamber of Commerce
BELLA VISTA -- The Bella Vista Business Association has been operating as a chamber of commerce for a while, so it only makes sense to officially name itself as such, according to Association President Jean Galloway.
Texas advocates warn proposed cuts to health, assistance programs could hurt vulnerable communities
The Texas Health and Human Services Commission proposed cuts to more than 20 client services programs. Dozens of Texas advocates testified at a legislative budget board hearing Thursday to ask state lawmakers to protect those programs.
Pioneer of China NewCo model sued in US over trade secret misuse, double-dealing
A legal feud unfolding in New York is putting a spotlight on the work of a business development veteran who is credited for pioneering one of biopharma’s hottest dealmaking mechanism: the China “NewCo” model. In a lawsuit originally filed in New York state court and recently moved to federal court, China’s Lepu Medical Technology has alleged that biopharma business development consultant Su Zhang, who was hired to help shop its GLP-1 weight-loss candidates to Western partners, engaged in corporate double-dealing and trade secret leaks. According to the complaint, while acting as Lepu’s primary dealmaking liaison for a group of obesity and metabolic disease drug candidates, Zhang was secretly double-dipping as the acting chief business officer for a direct competitor, BrightGene Pharmaceutical. “She never adequately disclosed the role, never sought Lepu’s consent, and never proposed any safeguard,” Lepu alleged in its complaint, which was filed in July after Zhang’s consulting firm, CoDevCo, sought certain transaction-based success fees from its angry customer through an arbitration process in Singapore. Lepu, the parent company of Lepu Biopharma, has asked Zhang to pay back its $500,000 retainer and disgorge all benefits she received during the alleged breaches of fiduciary duty, plus other damages and relief. The company has also requested the court grant injunctions to protect Lepu’s trade secrets. The ill-fated partnership officially kicked off in December 2024, when Lepu tapped CoDevCo as its “exclusive business development mechanism” to identify collaborators for the company’s drug candidates. According to Lepu’s complaint, Zhang personally negotiated and signed the agreement as managing director for CoDevCo, which used her home address. Before the Lepu deal, Zhang made a name following a short stint as the global head of business development for Hengrui Pharmaceuticals. It was during her tenure that Hengrui signed a landmark deal granting exclusive rights for a portfolio of GLP-1 assets to Hercules, which was at that time newly established by a group of private equity and venture capital firms. In addition to the regular upfront and milestone payments, Hengrui also gained an equity stake in Hercules, which later became Kailera Therapeutics. The Hengrui-Hercules deal opened a new paradigm, where a Chinese biopharma company spins off certain early-stage assets to investors for further development through the creation of a new company abroad. The “NewCo” model quickly came into vogue as it allows Western investors to access high-potential assets originating from China at an early stage while giving the Chinese licensors an opportunity to reap long-term benefits through equity stakes in the new firms. The NewCo model proved its value when Kailera staged a record-breaking $625 million IPO on Nasdaq this April, merely two years into the Hengrui deal. Related Kailera CEO 'knew we were in a good spot' before obesity biotech's record-breaking $625M IPO On her LinkedIn page, Zhang described her work at Hengrui as “[b]uilding team and capability from the ground up,” forming NewCo and major pharma partnerships worth billions of dollars. Lepu clearly wanted that kind of track record to help boost its own cardiometabolic portfolio, which includes a range of assets for obesity, Type 2 diabetes, fatty liver disease and muscle preservation during weight loss treatment. “Lepu’s pipeline is very valuable, but only if Lepu could secure the right international partner to expand into the overseas market during the available commercial window,” the company argued in its complaint. The Chinese biotech said it had little knowledge of U.S. laws, customs or business practices in the business development field, and therefore “needed to rely entirely” on the expertise of Zhang and her team as the firm’s first engagement of a U.S.-based BD consultant. “Zhang’s dominating influence on the business development strategy is further evidenced by the fact that she personally controlled the business-development communications on behalf of Lepu with potential partners,” Lepu said in its complaint. After entering the deal, Zhang introduced Lepu to her four associates. According to Lepu’s version of events, all of them were allegedly employed at different time points to perform similar jobs at other Chinese companies that Lepu described as its competitors, while having access to Lepu’s confidential information. As such, Lepu described Zhang’s team as “a roster of individuals whose primary professional loyalty, by virtue of their concurrent full-time employment, ran to Lepu’s competitors.” As well as the specific examples set out in the case, a look at Lepu’s deals over the period suggests Zhang may have been involved in at least one transaction. During their partnership, Lepu, through its subsidiary Shanghai Minwei Biotechnology, also out-licensed its GLP-1/GIP/FGF21 agonist MWN105 to a NewCo called Sidera Bio in the fall of 2025. The deal included an upfront and near-term payment of $35 million, up to $1.01 billion in milestones, and a 9.99% stake in the Danish startup. It seems likely that Zhang facilitated the Minwei deal given that Lepu is on record as having used CoDevCo as its “exclusive business development mechanism.” The big shock for Lepu came in the form of a news article on June 25, 2025. The article, reporting on phase 2 data for BrightGene’s GLP-1/GIP receptor agonist BGM0504, identified Zhang as acting chief business officer of the Lepu rival. Blindsided by her association with BrightGene, Lepu confronted Zhang in July 2025. “Lepu was given assurances that there was nothing to be concerned about and told that Zhang would explain the matter to Lepu,” Lepu alleged in its complaint. “Zhang never did.” Lepu claimed that Zhang had the motive and opportunity to steer potential prospective partners toward BrightGene or other competitors. Later, in February 2026, one of Zhang’s associates joined BrightGene as the vice president for global business development, according to the complaint. Around the same time, Lepu sent written demand letters asking Zhang to account for her BrightGene role, identify what confidential data were shared with the rival firm, and provide any conflict-of-interest or firewall policies during the engagement. According to Lepu, neither CoDevCo nor Zhang answered the questions in their responses. Related Novo vs. KBP: How a $1.3B deal turned into a fraud accusation and an international legal fight In a motion to dismiss filed with the U.S. District Court in the Eastern District of New York on Sept. 4, Zhang’s legal team argued that Lepu’s agreement was signed with CoDevCo, and that an employee of the contractor does not owe fiduciary duties to the client. In its complaint, Lepu said: “That CoDevCo was the contracting entity does not insulate Zhang from personal liability for duties she personally undertook and personally breached.” Taking the argument one step further, the defending party argued that the consulting agreement “does not create a fiduciary relationship even between CoDevCo and Lepu; instead, it identifies CoDevCo as an independent contractor retained to market Lepu’s business to potential western partners.” Although CoDevCo was Lepu’s exclusive business-development contractor, there were no terms stipulating that the consulting firm should serve only Lepu, Zhang’s lawyer noted. As to Lepu’s claims that Zhang misappropriated trade secrets, the defendant argued that Lepu authorized the use of the information so Zhang’s team could perform their service per the agreement. In a rebuttal filed on Sept. 11, Lepu’s lawyer set out why they believe the Chinese biotech satisfied New York law’s misappropriation definition by alleging that the defendant used a trade secret “in breach of a duty or through improper means.” As an alternative to dismissing the suit, the defendant suggested the action should be stayed pending outcomes from the arbitration of a separate case in Singapore. While NewCo pioneer Zhang is defending her business arrangements, momentum behind the NewCo trend has continued unabated into 2026. Through August, Chinese biotech assets have spurred 15 NewCo deals this year, according to local trade publication PharmaDJ.
Arzana raises $4.3M to automate factory paperwork
Growing up around manufacturing in Okoboji, William Alexander wondered if there were ways to make administrative tasks more efficient to give manufacturers more time to focus on their specialties. After graduating from Stanford University, Alexander teamed up with classmate Marshall Kools to develop Arzana, which builds custom artificial intelligence models around client workflows and data,…
Appreciating Newtown’s Small Businesses Even More
To The Editor: One of the many core functions of Newtown’s Economic and Community Development is looking for every opportunity to connect more local customers and clients to our community’s expansive ...
Texas advocates warn proposed cuts to health, assistance programs could hurt vulnerable communities
The Texas Health and Human Services Commission proposed cuts to more than 20 client services programs. Dozens of Texas advocates testified at a legislative budget board hearing Thursday to ask state lawmakers to protect those programs.
Default Enablement of Copilot Features for Copilot Business and Enterprise
We’re introducing a new global default policy for generally available GitHub Copilot features and supported client capabilities in enterprise and organization Copilot settings. For the next 28 days, you can…
Not just physics: Quantum to make business case at Chattanooga conference
EPB knows most businesses don't have a clear idea of how quantum technology could be useful to them. That's why the Chattanooga utility is hosting its inaugural "Quantum in Business" conference.
Med Center Health hosts 4th annual Celebrate Community Concert at Bowling Green Ballpark
Med Center Health’s Adult Day Center hosted its 4th Annual Celebrate Community Concert at Bowling Green Ballpark on Thursday, welcoming hundreds of adult day service clients.
Governor announces another $54.6 million in rural health grants
Gov. Sarah Huckabee Sanders announced an additional $54.6 million in federal funding to bolster rural healthcare on Thursday, the latest allocation from the state's share of a $50 billion fund established by Congress last year.
Bentonville to hold shred-it and electronic recycling event for residents and business owners in October
BENTONVILLE -- The city, with the help of ESCO Recycling, will host a Shred-it and electronic recycling event for residents and business owners next month.
Diginex Consolidates Group-Wide Expertise and Launches Sustainability Science & Intelligence Initiative to Accelerate Product Innovation and Drive Measurable Client Outcomes
Group-wide activity integrates advisory, regulatory and methodological expertise across Diginex products and solutionsUnder the leadership of new interim CEO, Archana Kotecha, the intention is to turn insight into practical action and ultimately help clients achieve better, measurable outcomes.Johannes Weber named VP of Sustainability Science and Intelligence LONDON, Sept. 24, 2026 (GLOBE NEWSWIRE) -- Diginex Limited (NASDAQ: DGNX) (“Diginex” or the “Company”), a leading provider of Sustainabili
Construction begins on Sangamon County Public Health building
Project will add three new tenants and redesign floor plans to improve client services.
Business Brief: neonFROG wins regional Lantern Awards for client work
Two projects led by neonFROG team members were recognized with Lantern Awards for top projects and programs in the Southern Public Relations Federation.
HSBC plans India equity broking return after 13 years amid IPO boom, sources say
HSBC is re-entering India's equity broking business after an absence of more than a decade, seeking to capitalise on a robust pipeline of share sales and rising demand from wealthy clients for equity market products, two people with direct knowledge of the matter said.
Yolanda Brown pleads guilty to wire fraud after $207K theft from a Ken Welch political committee
The former political Treasurer admitted to a yearslong scheme involving roughly 20 clients and more than $1.4M.
Talent firm 24 Seven consolidates the new business efforts of its three concentric agencies
SktechDeck, Markacy and Futureman are now being pitched by 24 Seven’s new business team as any combination of the three shops that a client might want to tap
ENTERTAINMENT: ‘Barbie and Friends’ come to ESSE Museum; Laman library hosts wrestling
ESSE Museum & Store opens “Barbie and Friends” with a 5-8 p.m. Thursday opening reception that offers the opportunity to “meet two real live Barbies in person,” according to a news release.
Little Rock, Kapor Center to develop startup businesses
The city of Little Rock will partner with the Kapor Center on a multi-year project to work with "gap-closing" startup businesses to solve financial stability, housing, health care, education and workforce development challenges, according to a Wednesday news release.
Jewelry and poolscapes: See business licenses issued in Hamilton County last week
Business licenses issued Sept. 14-18, as provided by the Hamilton County Clerk's Office.
PG Intermediate School recognized for science excellence
PRAIRIE GROVE -- Prairie Grove Intermediate School has been named an Arkansas Gem School for being in the top 10% for science achievement and the top 10% for science growth statewide for 2025-26, according to the Arkansas Department of Education.
Kayak Clarifies Position in Business Travel Marketplace
Kayak for Business is looking to broaden its appeal beyond its enterprise configuration with Blockskye, targeting SMEs as well as large clients. SVP Eva Fouquet told BTN's Elizabeth West the company also is pursuing a hybrid strategy, developing AI capabilities while maintaining traditional online booking options as traveler trust develops.
Local Opinion: Religion and politics are inextricably connected
"Politics," as the Founders understood it, is the art of governance for the common good, a purpose that requires a moral framework.
The Pointe named September Master Gardener Business Yard of the Month
The Pointe, a residential property located at 389 Lake Hamilton Drive, was named the Master Gardener Business Yard of the Month for September 2026, according to a news release.
Crawford County Quorum Court expected to consider doing business with company owned by justice of the peace
VAN BUREN -- The Crawford County Quorum Court is set to discuss allowing the county to do business with companies owned by county officials and employees at its Monday meeting.
Holiday Event & Entertaining Guide 2026
As Orange County’s business calendar turns toward the holidays, where you gather says as much as what you serve. OCBJ’s Holiday Event & Entertaining Guide profiles the venues and culinary destinations setting the standard for the season, from client receptions to team celebrations to entertaining at home. This year’s lineup spans the county’s most distinguished […]
Paved in frustration: Kings Highway businesses cite challenges of bridge reconstruction
A large-scale transportation project has some businesses in Nash and Texarkana feeling like they are on a rocky road.
Experts say Arkansas lacks data about mental health screenings for new mothers, despite state mandate
Since 2023, Arkansas lawmakers have stepped up efforts to improve the state's dismal maternal health outcomes, including a requirement that doctors and other providers offer mental health screenings to women after giving birth.
Experts say Arkansas lacks data about mental health screenings for new mothers, despite state mandate
Since 2023, Arkansas lawmakers have stepped up efforts to improve the state's dismal maternal health outcomes, including a requirement that doctors and other providers offer mental health screenings to women after giving birth.
Tennessee Democrat to propose bill to ban corporations from political spending
A Tennessee Democrat is set to push for new restrictions on corporate campaign spending, following the seminal steps of a movement to limit dark money in politics.
Storytelling Bootcamp: Shop Owner Fulfills Dream with Downtown Business
Whether it’s in an ice cream shop or a clothing store, Beth Kornick has always loved the retail industry.
Downtown Bethlehem sports bar, restaurant up for sale
Located at 515 Main St., the restaurant and bar is listed for $799,000 and features a full menu, sports viewing and established clientele.
Here's how a KPMG FDE uses AI to work with clients
Justin Johnsen, now a forward deployed engineer at KPMG, has been at the firm for six years. He says a lot has changed in the past year.
2nd NYC health system makes deal
A second major New York City health system has struck a deal with the Trump administration to no longer provide gender-transition care to adolescents and pay a penalty to the federal government, the Justice Department announced on Friday.