SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " combination " 281 found 🔀 AI-powered Shuffle
CCIA Files Comments to Japan Fair Trade Commission on its Updated Business Combination Guidelines
Washington – The Computer & Communications Industry Association submitted comments to the Japan Fair Trade Commission (JFTC) in response to its request
Cville Local Experts: Distinguishing the difference between home health and home care.
Whenever someone needs medical support in their home, albeit short or long-term, a combination of both home health and home care can support the family, the patient and relieve some of the financial burden.
Is Oscar Health (OSCR) Fully Priced Following Raised 2026 Guidance?
Oscar Health (OSCR) recently reported record first half 2026 results and raised its full year guidance, a combination that appears to have supported renewed investor attention on the stock this month. At a share price of US$30.47, Oscar Health has seen some short term volatility, with a 7 day share price return down 4.9%. However, the 90 day share price return of 37.07% and 3 year total shareholder return of 363.07% suggest momentum has been strong over a longer stretch as investors react to...
Patriots Rookie’s Bizarre Preseason Performance Could Secure Roster Spot
Behren Morton’s unusual combination of punting and late-game heroics may have convinced the Patriots to keep three quarterbacks.
Vision Marine Technologies Signs Letter of Intent for Proposed Business Combination with an Undisclosed Counterparty
Proposed combination would create a publicly traded platform expanding the Vision Marine platform of artificial intelligence, autonomous systems,...
Ear to the Ground: What's your dream business combination in Columbia?
Semi-regularly, Free Times will ask a question of you, dear readers, about an important facet of life in the Columbia area. Then we’ll share your anonymous responses, as well as the next question for ...
Pasqal and Bleichroeder Set August 25 Shareholder Vote on Business Combination
Bleichroeder Acquisition Corp. II will hold an August 25 shareholder vote on its proposed business combination with Pasqal.
Why Flutter Entertainment (FLUT) Is Down 6.2% After Profit Turnaround, Lower Guidance And CEO Change
Flutter Entertainment plc recently reported past second-quarter 2026 results showing higher sales of US$4.33 billion but a shift to a net loss of US$274 million, alongside lower full-year 2026 revenue guidance and confirmation of a CEO transition to Dan Taylor from October 1, 2026. The combination of rising sales, a move into losses, trimmed revenue expectations, and boardroom change presents a complex picture of operational progress alongside profitability and leadership uncertainty for...
EigenQ and Silicon Valley Acquisition Corp Submit Draft S-4 for Proposed Business Combination
EigenQ and SVAQ have submitted a draft Form S-4 to the SEC as they advance their proposed business combination, expected to close in Q4 2026
EigenQ and Silicon Valley Acquisition Corp. Advance Proposed Business Combination Transaction through Confidential Submission of Registration Statement on Form S-4
/PRNewswire/ -- EigenQ, Inc. ("EigenQ" or the "Company"), a quantum technology company, and Silicon Valley Acquisition Corp. (Nasdaq: SVAQ) ("SVAQ"), a...
Scientists Uncover a Surprising New Route for Stonehenge’s Most Mysterious Stone
Stonehenge’s Altar Stone may have traveled south through a combination of glacial transport and deliberate human movement. Stonehenge was assembled from stones weighing between 2 and 25 tons, an astonishing construction effort for people living before the wheel was invented. Yet the puzzle extends beyond how such massive rocks were raised. Many of the stones
Nebraska Football Player Power Rankings: Halfway Through Fall Camp
Welcome my most recent edition of my Nebraska football player power rankings. As I have said before, this list will be completely subjective in several ways and may not follow a logical path. Or maybe it will. This power ranking list will be a combination of the most important, most impactful, a recent contribution, waiting […]
Trump's vaccine order would require millions of individual shots last used decades ago
Monday’s announcement by Trump calls for separating combination shots — including the measles, mumps and rubella, or MMR, vaccine — into separate injections.
Joby Aviation to Scale Defense Business Through Acquisition of Resonant Sciences
Acquisition will significantly expand Joby’s defense business by adding a fast-growing company with established programs, classified capabilities and scaled manufacturing operations` Upon closing, Resonant will become Joby’s dedicated defense business, continuing its existing programs while expanding its portfolio to include Joby’s hybrid aircraft and autonomy technologies. Joby’s commercial aircraft business will remain focused on its electric air taxi initiatives Combination will create immediate opportunities to unite Joby’s dual-use aircraft, propulsion and autonomy technologies with Resonant’s radio frequency (RF), sensing and mission systems capabilities as well as its world-leading expertise in low-observability aircraft design Resonant delivered more than $100 million in trailing-twelve-month revenue, representing approximately 40% year-over-year growth, alongside strong adjusted EBITDA generation, driven primarily by long-cycle programs with the U.S. government, prime contractors and next generation defense technology programs
A winning combination: Connecting the university’s data science expertise and UTSA Athletics
UT San Antonio students are turning UTSA Athletics data into action by analyzing everything from player performance to fan behavior.
Man, 41, Inherits $2 Million From Parents — His Wife Wants To Put Half Into Her Sister's Struggling Business
A 41-year-old man in Georgia inherited $2 million after both of his parents passed away within a year of each other. The inheritance came from a combination of investment accounts, life insurance proceeds and the sale of the family home....
A 0.42-nanometer breakthrough could push transistors beyond silicon
Atomically thin semiconductors could enable dramatically smaller and more efficient chips, but a stubborn problem at the boundary between materials has limited their performance. Researchers have now engineered that atomic interface to protect electron flow while still allowing extremely thin insulating layers. The resulting transistors delivered an unusually strong combination of electrical control and performance.
PhD Student Locks Spot as Rising Cybersecurity Researcher
By Kim Horner | Computer science professor Dr. Kevin Hamlen is on a quest to train students in a combination of high-demand computer-security skills: the mathematical reasoning needed to prove software is secure and the programming expertise needed to uncover real-world vulnerabilities that could lead to cyberattacks. The University of Texas at Dallas cybersecurity expert […]
Chartbook 464 The"China squeeze" - the politics of development counterfactuals.
There are three types of China shock discourse. Each has a distinct temporal register. China shock 1.0 was a phrase coined by US academics in the 2010s to retrospectively summarize the impact on particular US labour markets, which they identified through painstaking empirical investigation. China shock 2.0 on everyone’s lips in Europe in the mid 2020s is an alarm raised by trans-Atlantic policy thinkers warning of a coming disaster which they project onto Europe’s ailing car industry. The third type of China shock discourse - commonly known as the “China squeeze” launched most recently by Indian economists Shoumitro Chatterjee and Arvind Subramanian in the pages of Foreign Affairs - mobilizes a different, more speculative temporal register: the counterfactual realm of alternate history. The China squeeze argument asks not what has happened, or what is going to happen, but what might have been. Specifically, what options for economic development might have been open to Global South economies like India or the economies of sub-Saharan Africa, had it not been for China’s spectacular industrialization since the late 1990s and the persistent competitiveness of China’s manufacture in low-skilled segments. Chatterjee and Subramanian’s argument is that whilst China has built a powerful position in electrical machinery and other high-skill manufacturing, which is now delivering China Shock 2.0, it also continues to run a trade surplus in low-skill, labour-intensive manufacturing. This surplus is large and has remained largely unchanged in fifteen years. Indeed, in the 2010s, in trade with low-income countries, China’s surplus rapidly increased. On their reading, this squeezes low-income producers in low-skill sectors in which they “should” be able to compete. Source: “China’s Mercantilist Squeeze on Developing Countries” Shoumitro Chatterjee and Arvind Subramanian. Peterson Institute for International Economics 26-7 May 2026 Chatterjee and Subramanian’s wording is telling: (emphasis mine) The canonical trajectory of economic development in the post-World War II period is for countries to transition from agriculture to manufacturing, first in low-skilled manufacturing and then later on to high-skill manufacturing (Herrendorf, Rogerson, and Valentinyi 2013). At the global level, this implies that high-income countries (HICs) that once specialized in low-skilled activities cede manufacturing export space to poorer countries that come along to occupy that space. In 1965, advanced economies accounted for about 60 percent of global value-added exports in four key low-skilled manufacturing sectors, i.e., apparel, leather, textiles, and footwear. Over time this share declined and began to be occupied first by the East Asian tigers and, beginning in the late 1990s, by China. Today China accounts for about 50 percent of the global market. The question is whether China, with its rising prosperity, is continuing to behave like its richer counterparts and ceding export space to poorer followers or to behave unlike them and continuing to occupy space. In terms of the conceptual maneuvers it performs, of the three China shock discourses, the “China squeeze” argument is by far the most ambitious. After all, it bases its critique of China on a counterfactual imagining of the world. Like any counterfactual argument, to construct this alternative reality it must rely on a heuristic model. To make their argument Chatterjee and Subramanian mobilize two key claims. The first reference point is the actual history of rich-country industrialization, what they refer to as the “canonical path”. The idea is that countries transition from agriculture to light industry and low-skilled manufacturing and from there up the value chain. To make this useful as a standard of comparison and a means to construct a normative standard, they adjust sectoral export shares for two factors: 1. the underlying level of economic development of the exporting country, as measured by national income and 2. the degree to which the sector in question is internationalized. The idea being that for a high income country to have a high export share in low-skill sectors is anomalous and even more so if that particular product is highly internationalized and thus suitable for being “conceded” to lower-income competitors. Where should this process end? Here Chatterjee and Subramanian introduce their second benchmark. Their normative idea of a global development path is one in which, in due course, low-skill manufacturing exports are distributed in proportion to a country’s share in the global labour force. They imagine, in other words, a world of proportional, polycentric global development without much national specialization in low-skill manufacturing. A useful benchmark is that, in labor-intensive manufacturing sectors, a country’s share of world exports should be broadly commensurate with its share of the world’s low-skilled labor endowment. … In the Heckscher-Ohlin model, this would be true if value added per worker and export propensities, i.e., fraction of output that is exported, are the same across countries. It is this pleasant liberal vista of orderly global development, progressing towards a general distribution of low-skilled manufacturing against which they judge reality and conclude that the low-income countries are suffering a “China squeeze”. China is not exiting low-skill sectors fast enough Allowing for its gdp level and the degree of globalization, China’s share of low-skill manufacturing exports is far higher than it “should” be. Relative to population, its low-skill share of exports is far too high. That in turn yields the conclusion that huge numbers of jobs - the authors suggest tens of millions - are being hoarded by China. For the four sectors captured in figure 4, this excess in value-added exports is $110 billion in 2022. For all low-skilled sectors overall captured in appendix figure D.1, excess value-added exports amount to $365 billion. The crowding out of LMIC exports by China is therefore substantial. Both these claims have in common that they are strong structuralisms. The first is that development paths ought to resemble each other. The second is that broadly speaking as far as low-skilled manufacturing is concerned, all countries are alike. If the world currently diverges from the distribution of trade implied by these assumptions, if China is not following the advanced economy path and has huge exports, this must be the result of “policy”, which the authors then put in question as illegitimate or unfair. Thus the naturalistic construction of a canonical path leading to a “level” distribution of low-skilled manufacturing reveals itself to be a polemical tool. From the point of view of China shock polemics, this discourse is no doubt welcome. But as an account of economic history, it must surely be regarded as nothing short of bamboozling. Development paths do not follow a regular, natural sequence. As David Fishman put it aptly, “development is not a queue”. They are always and everywhere, through and through political. Development is not so much a process, as a project. Each such project is more or less well adjusted to its context. As Gerschenkron taught uneven and combined development implies differentiation rather than simple imitation on a single parth. It may be true that Europe and the US exited relatively early from low-skill work. But clearly technology has changed. As C&S themselves point out, China no longer enjoys a low wage environment. Do they really believe that such huge differences can be accounted for either by industrial policy, which as they admit does not operate powerfully in low-skill sectors, or by exchange rate manipulation? What is overwhelmingly dominant in explaining the persistence of “low-skill” manufacturing in China are surely the network effects of complex supply chains. Indeed the label of “low-skill” may miss the point. The degree of globalization which Chatterjee and Subramanian decide to conjure away in their model of the development path - to allow for the fact that Europe and American textiles exporters did not enjoy just-in-time logistics in the 1950s - obscures the point that the networks through which Chinese factories supply the world are themselves key parts of the low-skill industrialization project. China isn’t knocking out 1970s style “cheap”. It has redefined the entire product cycle. C&S’s casual reference to “T-shirts” is telling. In today’s “fast fashion”, there is weight on both terms. Fashion and fast. China’s success in delivering on both at unprecedentedly high speed and at unprecedentedly low cost, isn’t a low-skill operation at all. If we see development trajectories not as the serial repetition of the same, but as distinctive, crafted projects that cumulate in complex agglomerations of skill, technology and labor, then this explains why the assumption that low-skilled manufacturing should follow the distribution of population flies in the face of all experience. As countless cases attest, low-wage, low-income developed economies are not by themselves the makings of a competitive production base. As Leon Liao puts it quite fairly: “International trade has never been allocated according to population. A country’s population gives it no natural claim to an equivalent share of global exports." And the remarkable fact is that Subramanian alone and with co-authors has long been making this point, not to pillory China, as is the case of the tendentious _Foreign Affair_s and Peterson pieces, but to highlight the great counterpart to China’s industrial success, namely India’s relative failure. The much-quoted Foreign Affairs piece showed low-skill export shares only for China, not for India. If you put both countries in the picture as Chaterjee and Subramanian have done on other occasions, the picture looks like this. China is far above the line, but India, almost as large in terms of population, is no less anomalous, just in the opposite direction. As far as global populations are concerned, and the imagining of tens of millions of “squeezed” jobs, it is this Sino-Indian pair that account for a huge share of the action. What this graph reveals is not China’s cheating, but India’s “greatest development failure”, at least this is the argument made Arvind Subramanian, this time in co-authorship with Devesh Kapur, in their major book, A Sixth of Humanity. Independent India’s Development Odyssey which appeared with Oxford University Press earlier this year. In this highly critical work on India’s development, China is repeatedly evoked, not to criticize but as a benchmark against which to illuminate what India’s political economy has not delivered i.e. large-scale formal employment for hundreds of millions of citizens. Kapur and Subramanian leave no doubt, if you want to understand why China, not India was the main driver of manufacturing globalization from the 1980s, don’t look to slots opening up in the division of labour thanks to the liberal mindedness of advanced economies, look to the contrasting political economy of the Maoist PRC and India’s post-independence political economy. As Kapur and Subramian note: The great divergence between China and India did not begin in 1978 with the Deng reforms—it was well underway by then. In one of the great ironies of modern history, the conditions created by Maoism turned out to be a great launching pad for industrial globalization. As the comparison of India and China in 1980 makes clear, to imagine manufacturing would be equally distributed when populations are so differently endowed in terms of educational and nutritional is fanciful. Here is the data from Kapur and Subramanian, data which I explored back at the very beginning of Chartbook. As Kapur and Subramanian insist, the striking fact is that even as India’s growth accelerated from the 1980s, structural change has not. Formal employment in India lags woefully behind. Why? As Kapur and Subramanian note, the path-dependent impact of India’s poor early start was devastating. The list of factors they mention is long and weighty: We argue for a new five-fold explanation applicable at different stages of Indian history: in the initial stages, the legacy of two key pre-1980s policies, the neglect of agriculture and the strangling of the domestic private sector, were critical. The failure of broad-based agricultural growth militated against rural industrialization, which would have been devoted to satisfying local needs that would have necessarily been labour intensive. Then, when the boom came after 1980, the thicket of regulation and broader labour protections that were legislated prematurely in a nascent democracy, underpinned by a deep ideological aversion to private capital in general and big capital specifically, became a barrier to attaining the size that would be necessary to compete globally. Similarly, the reforms after 1991, while wide-ranging, did not quite encompass non-tradeable inputs critical to manufacturing, namely, land, logistics infrastructure and power. A combination of low investment (logistics infrastructure), regulation (land) and the continued monopoly supply by state governments (power), combined with residual socialism, kept costs at 75–100 per cent above efficient supply. These factors were compounded on the supply side by the government, which dominated the formal labour market and established exorbitantly high wages at the lower end of the skill spectrum. This made their employment in the labour-intensive sector by the private sector less attractive. Finally, when the services sector and its exports boomed, wages soared even further via a Dutch Disease effect: one successful tradeable sector killed and cannibalized another less-skilled tradable sector, namely, manufacturing. Thus, scarcity-inducing policies of the planning era, precocious democracy and a Gandhian aversion to size; inefficient, monopolistic supply of critical non-tradable inputs; the behemoth of government; and super-successful skill-intensive services successively undermined India’s unskilled labour employment opportunities. The employment failure seems to have been over-determined. … Less quantifiable but no less important are some of the sociological factors that have undermined manufacturing and factory jobs. Take the impact of the success of the IT sector—located in urban areas with better working conditions, such as air-conditioned offices, good schools for children and attractive entertainment options. It became a more attractive place for engineering and management graduates to flock to. … Consider manufacturing and female employment. Indian society makes it difficult for women to work, reflected in India’s unusually low female labour force participation (elaborated in Chapter XIII). Indian society, in particular the routine harassment of women in public spaces, makes it even more difficult for them to travel long distances to take up work.37 Combined with onerous regulations on creating hostels and dormitories for women—which, in turn, prevents multiple shifts of operation—factories need to be located in areas with a large female labour pool. While firms can take apparel plants to female labour or bring them to the plants by building large-scale dormitories, this raises costs. If there was a case for subsidies to encourage labour-intensive manufacturing, housing subsidies to build dormitories for women workers would be a good place to start. All of this meant, that when opportunities did open up, in part thanks to adjustments in China, India was in no position to take advantage. Here is the account of the 2020s from Kapur and Subramanian. It stands in dizzying contrast to the one-sided, “China squeeze” argument delivered in the Peterson and Foreign Affairs pieces: In 2022, for example, India’s share of global exports in clothing (the canonical labour-intensive sector) was 3.1 per cent compared to 32 per cent for China. This is extremely disappointing because China started vacating export space in this sector after the Global Financial Crisis as its wages started rising; it then vacated further space in the aftermath of geopolitical developments that led investors to seek alternative investment locations. Between its peak and today, China lost about 7.5 percentage points of global export share (worth about $43 billion in 2022); over this period, India’s export share remained stagnant at 3 per cent, while that of Vietnam and Bangladesh rose by 3.5 to 4 percentage points. China’s loss did not translate into any gain for India in terms of low-skill exports and employment. Put differently, when the conditions for dynamism and prosperity were established after 1991, and even more tantalizingly when the global export opportunities opened up, it was as if India was a high-wage economy and only skilled labour could benefit from the dynamism. It had converted its physically abundant unskilled workforce into an economically expensive resource, penalizing its use. It is not my mission here to argue for or against Kapur and Subramanian’s interpretation of India’s development trajectory. The point in this context is simply that the “China squeeze” such as it is can only be understood, in relation to the heavy burden of domestic constraints that Kapur and Subramanian so unsparingly enumerate. I am concentrating here on India because it is the great counterpart to China and the unspoken reference point of the “China squeeze” discourse. But the point is more general. Can anyone with a straight face suggest that the main problems afflicting the development of South Africa or Nigeria, the great centers of mass underemployment in sub-saharan Africa, are cheap competition from China driven by Beijing’s industrial policy and an undervalued RMB? Likewise, is the main problem of the American working-class the threat of Chinese competition or the manifest crisis of social reproduction in the United States itself? The point here, as in the discourse around China shock 2.0 in Europe, is to insist that we should not normalize the world and pathologize China, without actually investigating what is going on in America’s industrial wastelands, the German car industry, or India’s lopsided labour market. One-sided pathologization should be understood for what it is, a polemical gesture. Concepts like China shock and China squeeze are, what Reinhart Koselleck, following Carl Schmitt, would have described as “asymmetrische Kampfbegriffe”, or “asymmetrical counter-concepts” or “asymmetrical combat concepts”. If the function of arguments like the “China squeeze” is to alert elites in the rest of the world of the need to rejuvenate and energize their development projects, so be it. But let us see the resulting discourses as the mobilizing interventions that they are. Interestingly, a significant slice of China’s public sphere - the so-called industrial party - have been obsessed for the last twenty years with precisely these questions of counterfactual economic history. Since the mid 2000s, a massive online discourse developed around an alternative history in which Chinese techno-patriots were asked to imagine how they would proceed if they had the possibility of traveling back in time to transport modern technology into the Ming dynasty (1368-1644) thus averting the “great divergence” of the 18th and 19th centuries. It is a fantasy of course, but also a goad. The point was not directed at Westerners. The alternate history is dramatically nationalist, but few n the West had even heard of it until recently. The adherents of the industrial party are not liberal moralists. They don’t project natural ladders of international development and ask why others don’t cede space. They take the Realpolitik of global economic development for granted. Their pointe was directed against fellow Chinese. The rallying cry of the alternative narrative was this: Now that we are beginning to gain steam and push forward on our national development path, now that we are breaking out of the inferior position assigned to us even in the early years following WTO accession, do not lose yourself in humanistic imaginings about better futures. In the spirit of Deng, they called on China to embrace the hard truth of development. Perhaps one might of the Industrial Party as a cultural trend born out of desire for symbolic revenge against those who had inflicted the century of humiliation. In terms of the various temporalities of the “China shock” - retrospective, prospective and counterfactual - one might think of the Industrial Policy discourse as truly speculative, conjuring up the China shock that never was. Or perhaps one might better think of it as imagining a world in which a powerful China was no shock at all, but simply a defining fact of modern history. I love putting out Chartbook. I am particularly pleased that it goes out for free to thousands of subscribers around the world. But, writing this newsletter takes a lot of work. If you are enjoying it and would like to support the project, sign up for one of the subscription options here. It is the equivalent of a fancy cup of coffee per month! Subscribe
IDEAYA Biosciences Reports Second Quarter 2026 Financial Results and Provides Business Update
Registrational OptimUM-02 trial of the darovasertib combination in metastatic uveal melanoma (mUM) met its primary endpoint; new drug application (NDA) filing...
‘Now or never’ mindset opens the M&A floodgates for Corporate America
U.S. companies are pursuing large mergers and acquisitions as they seek to capitalize on what many view as the most business-friendly regulatory environment in years under the Trump administration, The New York Times reports. High-profile deals include NextEra Energy’s proposed $67 billion combination with Dominion Energy, Sysco’s $29 billion acquisition of Jetro Restaurant Depot and […]
PENN Entertainment (PENN) Earnings Expected to Grow: Should You Buy?
PENN Entertainment (PENN) doesn't possess the right combination of the two key ingredients for a likely earnings beat in its upcoming report. Get prepared with the key expectations.
Scientists found evolution repeating itself in the Galápagos Islands
More than 150 years after Darwin’s finches helped reshape biology, Galápagos plants are exposing another evolutionary surprise. Giant daisies repeatedly developed similar heat-tolerant leaf shapes, but each lineage used a different combination of genes. Researchers also found major genetic differences among isolated populations, suggesting new species may be forming right now.
Grant Thornton to acquire CBIZ for nearly $3 billion
The combination would establish the fifth-largest accounting firm in the U.S.
Oregon restaurant hit by construction and cyclospora outbreak sees business drop nearly 50%
This summer, the restaurant is facing a combination of challenges that has cut business by nearly half.
How a rural health merger brought more care closer to home
The combination of Sanford Health and Marshfield Clinic helps recruit physicians, improve retention and expand access to care in rural communities.
McCormick unveils leadership, operating plan after Unilever Foods deal
Hunt Valley-based McCormick & Co. unveiled its leadership team and operating structure for its planned combination with Unilever’s Foods business.
TECfusions, a Rapidly Growing Developer and Operator of AI-Ready Data Centers and Power Infrastructure, Signs Business Combination Agreement with Apex Treasury Corp.
TECfusions is positioned where accelerating AI data center demand meets a scarcity of power-secured capacity. Company ethos centered on the fusion of ‘Technology, Environment, Community’ focuses on delivering AI-ready capacity while advancing environmental redevelopment and local community outcomes. Unique adaptive reuse strategy designed to convert legacy industrial sites into AI-ready, power-enabled data center infrastructure, accelerating deployment in power-constrained markets. The Transacti
Wilson Sonsini Advises Freenome on IP Matters Related to Business Combination, Public Company Launch
On July 20, 2026, Freenome Holdings, Inc. (Freenome), an early cancer detection company developing blood-based screening tests, announced the closing of its previously announced business combination…
Caesars Entertainment (CZR) Earnings Expected to Grow: Should You Buy?
Caesars Entertainment (CZR) possesses the right combination of the two key ingredients for a likely earnings beat in its upcoming report. Get prepared with the key expectations.
Inhospitable climate: GOP's disdain of science helps foul air again
It requires a specific combination of stupidity, ignoring expertise and thinking that the voting public will fall for silly grandstanding.
Testing imminent for 2028 IndyCar
The IndyCar Series’ new-for-2028 chassis and engine combination is expected to turn its first laps of validation testing within the next two weeks.
Sports without politics is a fantasy and the World Cup proves it
From ancient Greece to Nazi Germany, sport and politics have long been intertwined. Nevertheless, we still imagine that international sport can be kept above the fray and serve as a neutral arena where nations compete on merit alone. In this article, diplomacy scholar Geoffrey Allen Pigman argues the 2026 FIFA World Cup shows this is a dangerous illusion. When international sport is left entirely to revenue-maximizing private bodies like FIFA, it doesn't escape politics, but rather surrenders to its worst expressions. With the 2028 Los Angeles Olympics fast approaching, the IOC must decide whether to learn that lesson or repeat the same mistakes. The largest and most lucrative FIFA World Cup ever draws toward its climactic conclusion amidst a swirl of controversy. Team members, staff, fans, and spectators have been denied their right to enter the United States to participate, and US President Donald Trump intervened with FIFA boss Gianni Infantino to overturn a referee’s call that Trump believed disadvantaged the US national team. It is a moment to step back and reflect on what the purposes of international sport mega-events like the World Cup, and international sport more broadly, are, and what they should be. Does international sport serve public purposes? Is there a public interest? Or is it primarily a private endeavor organized by commercial enterprises to entertain the global public (and generate profit in the process), which is occasionally used by governments and leaders for raisons d’etat? Central to the idea of sport is the principle of fair play, which in the international context demands that games be free from political interference. However, it is impossible to separate sport from politics, all claims to the contrary notwithstanding. The most positive political use of international sport through the millennia has been to facilitate diplomacy. The use of international sport for diplomatic objectives has existed since at least the time of the ancient Olympic Games, around which was instituted the custom of the Ekecheiria, or Olympic Truce, between participating states to facilitate fair competition and diplomatic achievements by ensuring that participants could travel safely to the Olympiad. In his seminal work On Diplomacy (1987), diplomacy scholar James Der Derian characterized the objectives of diplomacy as overcoming alienation and mediating estrangement between governments and between peoples. One increasingly important diplomatic tool in the technology-infused media environment over the past century has been public diplomacy, under which governments and non-state diplomatic actors (e.g. transnational corporations) communicate to global publics about their international policy objectives and to shape their global brand image. Political scientist Michał Kobierecki, in his important book Sports Diplomacy (2020), views sports diplomacy as falling broadly within the ambit of public diplomacy, as international sport intimately involves the participation of global publics as spectators and consumers of global media. Diplomacy scholar Stuart Murray and this author, in a 2013 article, distinguish between international sport used for diplomatic purposes and international sport-as-diplomacy, which encompasses the range of diplomacy that occurs as teams and competitors, spectators and fans, and government officials all converge for international sporting events like the Olympic Games and FIFA World Cup. Diplomacy scholar H.E. Chehabi, in a 2001 article on US-Iran sports diplomacy, describes the interaction between spectators and fans at international sporting events as “people-to-people diplomacy,” in which relationships develop independently of governments and their objectives. Diplomacy by the aforementioned definitions is often unsuccessful. Moreover, all too often the tools of diplomacy may be employed by governments and other actors to thwart or oppose the objectives of diplomacy as characterized by Der Derian. Governments routinely use the tools of public diplomacy to disseminate propaganda, spreading misinformation in the attempt to deceive global publics about their objectives and to create misleading impressions about their brand identity. Within sports diplomacy, the term “sportswashing” has been coined recently to describe how governments invest in and promote international sport to create positive global public impressions of their nations and, in doing so, to distract the global public from their deficient records in areas such as human rights and democratic governance. Murray, in his 2018 book Sports Diplomacy: Origins, Theory and Practice, introduces the concept of sports anti-diplomacy, wherein governments intentionally use international sport to advance aggressive and nationalistic objectives. Obvious historical examples include Hitler’s use of the 1936 Berlin Olympics to glorify his Third Reich and the 1969 El Salvador-Honduras football “war.” SUGGESTED READING The beautiful game made ugly By Emily Ryall FIFA argues that it is and seeks to be apolitical in its stewardship of international Association Football (soccer). FIFA policies governing bids to host the World Cup require uninhibited and non-discriminatory access for players, team staff, and spectators of all participating countries to host nations and venues. It became clear soon after Trump returned to power in the United States in January 2025 that Trump’s political intentions and objectives to limit non-US citizens from living and working in the United States and, in numerous cases, even visiting the country, would collide with FIFA’s host nation policies. Beginning soon after the start of the second Trump administration, US federal authorities imposed restrictions on entry to the United States of citizens of between 20 and 40 countries for any purpose, with only limited exceptions. Federal Immigration and Customs Enforcement (ICE) began arresting non-US citizens in the United States, including persons with and without legal status, holding them in jails, concentration camps, and other detention facilities until they were deported to their home or third countries, where they faced substantive risks to their personal safety. FIFA boss Gianni Infantino, in an effort to ensure the most successful and lucrative World Cup in history, engaged diplomatically with President Trump in an attempt to facilitate entry to the US for World Cup participants. Infantino did all in his power to ingratiate himself with Trump, to the extent of creating a FIFA “Peace Prize,” which he awarded to Trump in December 2025 at a ceremony in the then Trump-controlled John F. Kennedy Center for the Performing Arts in Washington, DC, on the occasion of the World Cup draw. The prize was an ersatz consolation for someone who aspired in vain to win the rather more prestigious and well-known Nobel Peace Prize. And in the run-up to the World Cup, conditions became worse. In February 2026, Trump and Israeli Prime Minister Benjamin Netanyahu launched a war of aggression against Iran, illegal under international law, under the false pretence that Iran’s government was preparing to attack the United States and Israel. During the US aerial bombardment of Iran, US planes bombed Azadi Stadium, the facility where Iran’s national football team trained. As the 2026 FIFA World Cup began, it was clear that Infantino’s efforts had been for naught: the Trump administration would not adhere to FIFA policies governing access to World Cup host nations. World Cup referee Omar Artan, a citizen of Somalia, was denied a US visa to enter the United States to participate in the World Cup. Trump’s government only granted US visas to Iran’s football team ten days before they were scheduled to arrive for the tournament. Numerous members of the support staff for Iran’s team were denied US visas. Iran’s team, which had been scheduled to train in Arizona, was directed to shift its training site to Tijuana, Mexico, notwithstanding that all three of their group stage matches took place at US venues. The US Department of Homeland Security only permitted the Iranian team to enter the US on the day before each scheduled match and then to return to Mexico immediately after playing. Members of Iraq’s and Switzerland’s football teams were delayed for hours by US officials at the US border, and an Iraqi team photographer was refused entry. Spectators and fans from Haïti and Iran were denied entry to the United States altogether. A large number of fans from a range of countries had their applications for US visas rejected. There were multiple off-ramps through which participants could have avoided the negative consequences of Trump’s decisions for the 2026 World Cup. Once it was clear that the Trump government intended to violate the established expectations for World Cup hosts, FIFA could have shifted the matches scheduled to take place in the United States to Mexico and Canada. The three nations were already designated as co-hosts, and host cities and venues had been selected. Once it was clear that FIFA, governed by FIFA boss Gianni Infantino’s dependent and dysfunctional relationship with Trump, would never consider this option on its own, it fell to the national football federations to act. The national federations, particularly some combination of federations of the leading contenders (France, Spain, Brazil, Argentina, Morocco, England, Germany, etc.), could have refused to participate under the US-imposed conditions or, at the least, demanded an ironclad agreement with the Trump government that FIFA policies on access would be respected. ___ International sport is inextricably entangled with diplomacy of different sorts, for good or ill, it cannot be considered to be in the purely private realm and left to revenue-maximizing private actors. ___ Why did neither FIFA nor the national football federations act to protect the interests of players, team staff, referees, fans, and spectators? In essence, the relentless engines of capitalism prevailed over norm observance, ethics, and fair play. The revenue interests of FIFA, sponsors, global media, and host cities won out. FIFA’s managers viewed hosting another World Cup principally in the United States as a veritable pot of gold for FIFA and its collaborators. FIFA has estimated its own revenue over the 2023-26 budget cycle, which includes the 2026 World Cup, at $13 billion, revised up from an initial projection of $11 billion, and 72% higher than the previous revenue cycle. Of that total, FIFA is estimated to have generated $8.9 billion from the Cup itself in revenue from TV rights ($3.92 billion), sponsorships ($2.69 billion), ticket sales ($3.1 billion), licensing rights, and other sources. A joint study by FIFA and the World Trade Organization estimates that the World Cup will contribute over $40 billion to global GDP, including nearly $14 billion in direct visitor spending in the three host countries (but principally in the United States, which hosted the lion’s share of the matches). The FIFA World Cup is now reportedly “the single most lucrative recurring commercial property in global sport.” And yet, notwithstanding the Trump government’s uses of the World Cup for sports anti-diplomacy, and the climate of anxiety that this created for participants and spectators, diplomacy that did not depend upon governments was able to thrive at the World Cup. Examples of successful people-to-people diplomacy were legion, as citizens of towns and cities across the States, as well as in Mexico and Canada, welcomed team members, their families and supporters, to training sites across North America. Fans of different teams joined together in person in stadiums for matches, at watch parties and bars, and at welcome events sponsored by host cities. The joy and camaraderie shared between the citizenry of Boston and Scotland’s “Tartan Army” of fans is but one example of how the “Beautiful Game” brings people together. Friendships forged across continents are likely to endure well beyond the Cup final. Even those achievements cannot be seen as unalloyed, however. As South African football fan Byron Pillay commented to Al Jazeera, “Football is called the Beautiful Game for a reason, for its ability to unite people. But it’s hard to believe in that magic with the politics and war rhetoric off the field of play, especially when one of the tournament hosts is central to that.” Ultimately, the experience of the 2026 FIFA World Cup illustrates that, as international sport is inextricably entangled with diplomacy of different sorts, for good or ill, it cannot be considered to be in the purely private realm and left to revenue-maximizing private actors. As long as there is the possibility of diplomatic progress in mediating estrangement between governments or between peoples, there is a broad and overarching public interest in international sport. Likewise, as it would be difficult to put on an international sport mega-event without international sporting organizations like FIFA and the International Olympic Committee (IOC), global media firms, and companies purchasing sponsorships, public and private interests in international sport must coexist, most likely somewhere on a shifting spectrum between partnership and rivalry or cross purposes. As the World Cup wraps up, the IOC needs to consider its lessons before the scheduled 2028 Los Angeles Olympics if they want to avoid a media-hyped Trump version of the 1936 Berlin Olympiad. The IOC and the National Olympic Committees need to set conditions on and make demands of Trump’s government with clearly articulated consequences for non-compliance, up to and including cancellation of the Games. Time is running out for the IOC, as unlike with the FIFA World Cup, there is no at-the-ready alternate venue for Los Angeles.
Scientists tested 39 sweeteners and found unexpected gut effects
A large laboratory study found that many commonly used sweeteners can directly change the growth of gut bacteria. Researchers identified more than 100 cases in which sweeteners behaved differently when combined with medications, caffeine, or flavorings. The combination of isosteviol and the antidepressant duloxetine was especially disruptive, reducing beneficial bacteria and overall microbial diversity.
Uber Announces Acquisition Offer for Delivery Hero
Cash consideration of €41.50 per share offered to all Delivery Hero shareholders, representing an Equity Value of $14.8 billion, or $13.7 billion adjusted for Uber’s prior stake purchases The transaction is expected to be accretive to Non-GAAP EPS upon close; high-single-digit percentage accretion by year three Delivery Hero has separately agreed to sell part of its business covering 14 markets to SSW Partners Management Board and Supervisory Board of Delivery Hero unanimously welcome and support the Takeover Offer and intend to recommend Delivery Hero shareholders to tender into the offer, subject to their review of the Offer Document Prosus has irrevocably committed to tender their shares, which would bring Uber’s total economic interest to ~53% Uber Technologies, Inc. (NYSE: UBER) has entered into a business combination agreement with Delivery Hero, extending the world’s largest mobility and delivery platform to a total of 99 markets, with combined pro-forma Gross Bookings of $236
Fixing America’s polarization with proportional representation
Presidentialism plus single-member districts is a bad combination that incentivizes leaders to consolidate power by fueling division.
2026 NFL 'Triplets' rankings: Where every team's QB, RB, pass catcher combo stands
Ranking the best and worst QB-RB-WR combinations before the 2026 NFL season kicks off.
What SoundHound AI (SOUN)'s S-4 Business Combination and Platform Expansion Means For Shareholders
In recent days, SoundHound AI, Inc. filed an S-4 registration statement for a planned business combination and confirmed strong year-over-year revenue growth alongside ongoing quarterly losses and a solid cash balance with no debt. At the same time, the company is pushing beyond its automotive roots into a broader enterprise AI platform, using acquisitions and subscription services to expand use cases across restaurants, healthcare, retail, financial services, and telecom. We’ll now examine...
Core Silver and Arcus Enter Into Definitive Arrangement Agreement for Business Combination
VANCOUVER, BC / ACCESS Newswire / July 9, 2026 / Core Silver Corp. (CNSX:CC)(FSE:8ZR)(OTCQB:CCOOF) ("Core Silver") and Arcus Development Group Inc. (TSXV:ADG) ("Arcus", and together with Core Silver, the "Companies") are pleased to announce that, ...
Banijay Entertainment and All3Media combination completed
Press Release London, July 9, 2026 Banijay Entertainment and All3Media combination creates leading global media and entertainment powerhouse Banijay Group and RedBird IMI have completed the merger of Banijay Entertainment and All3MediaThe combination, first announced in March 2026, creates the world’s largest independent production company, with strengthened capabilities across content production, live events and experiences, digital, and new mediaThe combined Banijay Entertainment is headquarte
Soap, Suds and Spectrum Business’ Seamless Connection in the Sunshine State
The combination of technology and Spectrum Business’ partnership keeps Splash Express Car Wash’s business humming along – and its customers coming back.
Forestry scientists stay upbeat in face of federal turmoil
The Chinese word for crisis isn’t a combination of the symbols for “danger” and “opportunity” as some business strategy books once claimed. But if it did, it could be the
Better Than Cheddar: Step Up Grilled Cheese The Right Way With These Two Slices
For a grilled cheese sandwich that's bursting with flavor and has great texture, try using a combination of gouda and Havarti cheese together.
The science behind fireworks and their brilliant colors
Fireworks displays on Independence Day are created by the combination of different metal salts, which emit light at unique wavelengths to produce vibrant colors.
Croatia criticised for ‘unambitious’ changes to 2022 science law
Croatia’s science ministry has been accused of a lack of ambition, and even incompetence, over proposed changes to the country’s 2022 science law. Critics say an opportunity has been missed to fix wider shortcomings in the research and universities system.“This law, like all the previous ones, will not significantly change the current state of science in Croatia,” Vlatko Silobrčić, a member of the Croatian Academy of Sciences, told Science Business. “A small shift here and there will not have a significant impact.”The 2022 law introduced multi-year block grant financing of research, based on results, and changes intended to boost employment and career progression for researchers and lecturers. But implementation of the law has been uneven. “It became apparent that certain of its provisions were subject to different interpretations by higher education institutions and scientific institutes,” the science ministry said in its proposal for change. “This caused legal uncertainty in the system, administrative difficulties in implementation and, in certain cases, unequal treatment of teachers, scientists and students.”Most of the proposed amendments deal with technicalities in hiring and promoting staff, such as extending the committee deadlines from 60 to 90 days, or allowing applicants to cite all of their achievements and not only those since their last appointment.Both the ministry and Croatian media highlighted changes that would raise the retirement age from 65 to 67 years and allow part-time students 15 year rather than 10 years to finish their studies.The change to retirement age has been criticised for reinforcing a weakness in the system. According to Matko Marušić, professor emeritus at the University of Split, this will “allow unproductive teachers to advance and work longer, while hindering and discouraging productive ones.”A longtime campaigner for excellence-based meritocracy, he sees little hope in the new legislation. “I am not optimistic that things will improve,” he told Science Business. “As recent changes to the law in Croatia show, the legal framework is becoming increasingly hypocritical and harmful.”For Marušić, who analyses Croatia's university system in a recently published book, the situation is “unfavourable and constantly deteriorating” due to the criteria used for academic advancement.“The key criterion for advancement should be scientific productivity,” he said. “In Croatia [. . .] scientific criteria are increasingly lowered, and ineffective and absurd criteria such as waiting times for promotion and age limits for remaining in a job are promoted.” He would also like to see better criteria for the quality of teaching at universities. “In practice, teaching is not monitored or evaluated,” he said, estimating that up to a third of teaching simply does not take place. “Under the guise of university autonomy and bad laws, universities and faculties are allowed to earn additional money by increasing enrolment quotas that have nothing to do with the needs of the labour market.” Lack of ambitionDora Kršul, a reporter at Telegram.hr who covers science policy in Croatia, finds the rationale for changes “bizarre.” “The ministry responsible for supervising the uniform application of the law is changing the law because it is being implemented unevenly,” she said. “This primarily speaks to the power relationship in the sphere of science and higher education in Croatia, that is, the question arises as to who actually manages this system.”Rather than raising quality, she continued, the changes appear to be designed to help vocational and applied universities who have not been complying with the law.The Independent Union of Research and Higher Education Employees of Croatia said that the changes were “unambitious” and represent a missed opportunity for more important changes. “We think some of the changes are even negative,” it said in its statement on June 25. One of these is introduction of an “assistant” job title that allows people to be hired only for the duration of a project. Related articles: Elections to top science bodies test Croatia’s gender equality in researchSlovakia revises R&D approach to increase focus on competitivenessLatvia pilots citizen engagement in research grant evaluationsThe union’s president, Tvrtko Smital, who was part of the 15-member working group tasked with drafting the changes, told the local media there was a “worrying lack of ambition” in the process, and “lack of competence” in terms of research experience and understanding the problems in the system.“There is no clear will to deal with the problems,” said Smital, an assistant professor of marine and environmental sciences at the Ruđer Bošković Institute in Zagreb. “It’s a combination of unambitiousness and incompetence,” he went on, expressing his “deep frustration” with the situation. “There is no strategy, no clear thinking, and money is not being spent optimally.”Croatia’s science ministry has not responded to requests for comment.
Allegheny Health Network, Heritage Valley finalize combination in Pennsylvania
The deal brings Highmark Health-owned AHN’s hospital count to 16, and the combined system will invest about $285 million over the next decade to bolster Heritage Valley’s facilities.
Securitize Completes Business Combination with Cantor Equity Partners II
/PRNewswire/ -- Securitize Corp. ("Securitize"), the world's leading tokenization platform with over $4 billion in assets brought onchain, today announced the...
How Investors May Respond To PENN Entertainment (PENN) Aurora Casino Opening And Russell 2000 Shift
PENN Entertainment recently celebrated the grand opening of its new US$360 million Hollywood Casino and Hotel Aurora in Illinois, while also being moved from the Russell 1000 family of indices into the Russell 2000, Russell 2000 Value, and Russell 2000 Dynamic indices as part of the latest rebalancing. This combination of a large-scale brick-and-mortar investment and a shift toward small-cap and value-oriented index inclusion reshapes how both fundamental and index-tracking investors may...
IQM Completes Business Combination with RAAQ and Lists on Nasdaq
IQM has completed its business combination with RAAQ and will begin trading on Nasdaq under the ticker IQMX on July 2, 2026.
Talawar Therapeutics and JATT II Acquisition Corp. Announce Definitive Business Combination Agreement to Create Publicly Listed Biotechnology Company Developing Potentially Best-in-Class Bispecifics for I&I Diseases
Oversubscribed $225 million concurrent private investment in public equity ("PIPE") with available cash to the combined company at closing anticipated to fund...
AB Science reports completion of the step 3 of phase 1, evaluating the combination of AB8939 with venetoclax for the treatment of refractory or relapsed AML
PRESS RELEASE AB SCIENCE REPORTS COMPLETION OF THE STEP 3 OF PHASE 1, EVALUATING THE COMBINATION OF AB8939 WITH VENETOCLAX FOR THE TREATMENT OF REFRACTORY OR RELAPSED ACUTE MYELOID LEUKEMIA THE COMBINATION OF AB8939 WITH VENETOCLAX GENERATED A 67% OVERALL RESPONSE RATE (ORR) AND A 100% DISEASE CONTROL RATE (DCR), WITH NO DOSE-LIMITING TOXICITIES (DLT) OBSERVED, IN A POOR-PROGNOSIS POPULATION WITH ADVERSE GENETICS TREATED IN THE SECOND - TO FOURTH-LINE RELAPSED OR REFRACTORY SETTING Paris, June 2
Securitize and Cantor Equity Partners II Business Combination Expected to Raise Approximately $400 million in Gross Proceeds and Announce Expected Closing of Business Combination and NYSE Listing
/PRNewswire/ -- Securitize, Inc. ("Securitize" or the "Company"), and Cantor Equity Partners II, Inc. (Nasdaq: CEPT) ("CEPT"), a publicly traded special...
Elroy Air to Become Publicly Traded Company via Business Combination with Inflection Point-led SPAC
Elroy Air, Inc., a leading U.S.-based technology developer of autonomous heavy-cargo drones for defense, rapid response and commercial logistics, and Columbu...
Meta debuts new, cheaper smart glasses under its own brand
The smart glasses are available in several countries starting today in a variety of color and lens combinations.
Fortitude and HeartSciences (Nasdaq: HSCS) Announce Business Combination, Aiming to Bring a Leading Vertically-Integrated Zcash Mining Platform to the Public Markets
Fortitude Mining Holdings, Inc. ("Fortitude"), a vertically-integrated digital asset mining platform anchored in Zcash, and HeartSciences Inc. (Nasdaq: HSCS)...
Perceptive Capital Solutions Corp and Freenome Announce Effectiveness of Registration Statement for Proposed Business Combination
/PRNewswire/ -- Perceptive Capital Solutions Corp ("PCSC") (Nasdaq: PCSC), a special purpose acquisition company ("SPAC") sponsored by an affiliate of...
Abarca Health and LucyRx Announce Strategic Combination to Create the Only Modern PBM Built for Commercial and Government Scale
Abarca Health and LucyRx today announced a strategic combination to create the only modern, independent pharmacy benefit manager with the scale, technology, and track record to credibly serve commercial and government clients of any size. Combined, Abarca and LucyRx will provide prescription services to more than 9 million members across the United States.
EigenQ And Silicon Valley Acquisition Corp. Announce Definitive Business Combination Agreement to Create a Publicly Traded Quantum Technology Company
EigenQ announced an agreement with Silicon Valley Acquisition Corp. that would take the quantum technology company public on Nasdaq.
EigenQ and Silicon Valley Acquisition Corp. Announce Definitive Business Combination Agreement to Create a Publicly Traded Quantum Technology Company
Transaction expected to accelerate EigenQ's mission to develop and commercialize quantum technologies across security, artificial intelligence, communications,...
Live results: Oklahoma midterm primaries
A combination of term-limits, retirements, aspirations for higher office and one high-profile presidential appointment have triggered a wave of open seats in Oklahoma’s state primary on Tuesday.
As Americans tuck into supplements like their health depends on it, specialized products are displacing multivitamins
Some of today’s most popular products promise better immune, adaptogenic, anti-inflammatory, gut, skin or joint health—or combinations of two or more of the above.
Thanks For Making Me 12th Highest on Substack’s List Of “Rising” Business- and Economics-Related Newsletters
A big thank you to those of you who upgraded to paid subscriptions to read my two most recent paid memos: https://richardkatz.substack.com/publish/posts/detail/201675746?referrer=%2Fpublish%2Fposts%2Fpublished and https://richardkatz.substack.com/publish/posts/detail/201774434?referrer=%2Fpublish%2Fposts%2Fpublished As a result, total paid subs rose by 5.6% over the past seven days. And that put me at 12th on Substack’s list of “rising” newsletters in business and economics. “Rising” means those with the biggest percentage increase in revenue from subs over a short period of time. Of course, as is often the case with the issues I discuss, this is a good-news/not-so-good-news story. The good news is a rush of new subs. The caveat is that it’s easier to get a big percentage increase when the base is relatively small. I have enough paid subs to be in the initial rank of Substack’s “best seller list,” but a way to go before enough of the 12,000 subs to Japan Economy Watch are paid subs. For most hybrid newsletters—a combination of free and paid posts—2-7% of the total subs are paid. 5% is my initial goal. If you gain insight from reading this blog, please join those who’ve already upgraded; help me reach 5%—and beyond. Subscribe
Our New Study Shows That The Science Of Cannabis And Sleep Extends Beyond THC (Op-Ed)
“We found that the strongest evidence for improving sleep was associated with cannabidiol (CBD), cannabinol (CBN) and combinations of the two—but not primarily THC.” By Andrea Efre, University of South Florida College of Nursing The cannabis sleep market represents a shift away from traditional pharmaceuticals toward a natural alternative. Historically, cannabis products marketed for sleep […]
Millions take calcium and vitamin D for stronger bones. A major review finds little benefit
For years, calcium and vitamin D supplements have been promoted as a simple way for older adults to protect their bones and prevent falls. But a massive review of nearly 154,000 people found that calcium, vitamin D, or a combination of both provided little to no meaningful protection against fractures or falls for most older adults.
Is SMIC N+3’s Metal Pitch Smaller than Intel 18A’s?
Almost four years ago, we published that SMIC had started shipping 7 nm (N+1) chips. Now, SMIC is shipping its third-generation 7 nm (N+3) process in Huawei’s Kirin 9030, with a minimum metal pitch of 32.5 nm, about 10% tighter than the 36 nm minimum metal pitch shipping in Intel’s latest Panther Lake CPUs on 18A. The headline is true, but incomplete cherry picked metric. N+3 reaches the density of TSMC N6 through aggressive DUV multi-patterning and design-technology co-optimization (DTCO), but it pays for that in complexity, efficiency and process control. We found this and more in our reverse engineering and teardown where we cover SMIC’s N3 process technology, Huawei’s packaging, memory, architecture, and more. SemiAnalysis has been building a state-of-the-art teardown lab in Oregon capable of analyzing the world’s most advanced and important chips over the last year and half. We have already generated revenue on advanced datacenter chip teardowns including our recent reverse engineering of a major TSMC customer’s COUPE CPO optical engine + EIC 3D stack. This is the first public report from the SemiAnalysis Teardown Engineering & Evaluation Lab, or STEEL for short. The lab is aggressively scaling up and out and we’re excited to announce it publicly. This is a bit of inconvenient timing for TechInsights as they are private equity owned and currently being sold while having enjoyed virtually no credible competition for decades. This has led to TechInsights underinvesting in CAPEX. SemiAnalysis exceeds TechInsights in revenue despite no venture or private equity ownership and being founded only 6 years ago. Because we have no external investors and are founder led, we move faster, build faster, and we can release client chip teardowns for free regularly, while focusing on datacenter for our major clients. Here’s the first public image from our lab, the HiSilicon Kirin 9030 Pro SoC: This report will detail our teardown of the Kirin 9030 and our findings on SMIC’s N+3 process, the most advanced in China. For comparison, we’ll show our teardown of the MediaTek Helio G99, made on TSMC N6. Through this comparison, we can look at the effect of export controls – SMIC N+3 and TSMC N6 are comparable nodes, but one is heavily export-controlled, the other free to use the West’s most advanced equipment. Here we see both China’s progress and constraints. SMIC N+3 reaches TSMC N6-class logic density, but it requires far more aggressive DUV multi-patterning, so it does not match N6 on process maturity or cost. The Kirin 9030 Pro performs similarly to three-year-old Android flagships, and trails far behind the current flagship SoCs from Apple, Qualcomm, MediaTek, and Samsung. The efficiency gap is even wider. Export controls have not stopped Huawei and SMIC from shipping advanced silicon, but they have forced a different path. Without EUV, SMIC is leaning harder on DUV multi-patterning, DTCO, and increasingly complex integration. The roadmap continues forward through tighter design rules and backside power, but each step adds cost and process risk. Huawei’s τ scaling and LogicFolding show another path: stacking active logic and recovering density through advanced packaging and system-technology co-optimization (STCO). To understand the Kirin 9030, we must first understand Huawei’s SoC history. HiSilicon is Huawei’s chip design arm, responsible for the Kirin smartphone SoCs, Kunpeng server CPUs, Ascend AI accelerators, and switch/router networking silicon. Before export controls, Huawei was TSMC’s largest customer – the only customer on TSMC’s first EUV node, N7+, and among the first on N5, alongside Apple. That ended in late 2020. Huawei switched to Qualcomm SoCs in its flagship smartphones, though export controls limited them to 4G-only variants. In late 2023, Huawei returned to in-house silicon with the Kirin 9000s, a successor to the Kirin 9000, fabricated on SMIC N+2 instead of TSMC N5. In the following years, they released the Kirin 9010 and 9020 on the same N+2 process. These chips used Huawei’s in-house TaiShan CPU cores and Maleoon GPU. We have not torn down a Kirin 9020 ourselves, so the predecessor die shot is from Kurnal. The die shots show how Huawei spent its silicon budget: which functional blocks are where, and how their areas compare to the predecessor. First, a quick guide to the major blocks on the die. The total die area is nearly identical, but the 9030 uses that area more aggressively. A denser process lets Huawei fit an extra middle CPU core, more GPU and NPU cores, and larger caches into the same footprint. In contrast, the Helio G99 is a much smaller, low-cost SoC, built for budget smartphones rather than a flagship device. While the Kirin 9030 is ~140 mm², the G99 is only ~29 mm², roughly one-fifth the area. The underlying TSMC process technology, however, is directly comparable as a baseline for analyzing SMIC’s. The Kirin 9030 is an evolutionary refresh, not a clean-sheet design. Its CPU, GPU and NPU cores carry over the 9020’s families, and the gains come from three levers: the SMIC N+2-to-N+3 process step, DTCO and floorplan work, and incremental microarchitecture. Area is where the first two show up, and the 9030 scales well here. Performance and efficiency are the harder test. Huawei’s design holds up better than its node would suggest, but the chip still trails, both because N+3 sits behind the leading-edge nodes and because its cores, while competent, remain a few generations behind the newest designs. The new prime core is an incremental update. The main changes are a 10% frequency increase from 2.5 GHz to 2.75 GHz and a doubling in the L2 cache from 1 MiB to 2 MiB. Despite the increased cache, the core size decreased by 7.6%. Excluding the private L2 cache, the core size decreased by 21%. This is a large reduction for an incremental node. Compared with the TaiShan New V120 core in the Kirin 9020, the Kirin 9030’s middle core is almost unchanged architecturally, yet each core shrinks by ~22%. Most of that comes from the move from N+2 to N+3, with layout likely accounting for the rest. Visually, the most noticeable change is the increase from 3 middle cores to 4. There is also a 20% increase in the shared L3 cache of the big cluster. This helps to improve multi-core performance without sacrificing much in terms of area. Even with each core shrinking, the big CPU cluster’s total area is essentially unchanged. The per-core savings went back into an additional middle core and larger caches. The tiny cores shrank less than the prime core (excluding its L2 cache) and less than the middle cores. This is likely because fixed overhead is a larger share on a small core. We cannot resolve any architectural changes from the die shot alone, but the per-clock and efficiency gains shown below point to more than pure process and layout scaling. The area reduction was offset by a doubling of the shared L2 cache from 2 MiB to 4 MiB, leaving the total tiny CPU cluster area slightly larger. Area is the easiest improvement to see from a die shot, but it is only one part of PPA (power, performance, area). For modern logic, power and performance matter just as much, and often more. Since Dennard scaling broke down in the mid-2000s, voltage and frequency have not scaled in step with transistor dimensions, so each node has had to fight harder for gains in performance and efficiency. The starkest comparison is not Kirin 9020 versus Kirin 9030 Pro. Apple’s efficiency cores run circles around Huawei’s prime core. Apple’s low-power core delivers 20% higher integer performance while drawing only 1 W, compared with 4.5 W for Huawei’s prime core. N+3 matches TSMC N6, but N6 is several generations old. Apple and Qualcomm build on N4 and N3P, which are denser and sit on a better voltage-frequency curve, giving them a larger transistor budget and more performance per watt. The 9030’s own cores did improve. The middle and tiny cores gained 17% and 14% in per-clock integer performance over the 9020, with floating-point flat on the middle core and up 11% on the tiny. The tiny core improves cleanly, with performance rising while power falls and efficiency increases by 45% in integer and 24% in floating point. The middle core is mixed: integer performance rises but power rises faster, cutting integer efficiency by 7%, while lower power lifts floating-point efficiency 16%. Per-clock gains at the same or lower frequency are microarchitectural, so the cores are tuned, not just shrunk. Both also failed to hold their rated maximum frequencies, pointing to thermal, power, or stability limits. Per clock, the middle core sits around Arm Cortex-A720 and the tiny core near the Cortex-A520; absolute performance trails because Huawei clocks them much lower. The prime core is roughly Cortex-X2 class per clock, a 2021 design. Apple’s 2020 M1 Firestorm core is still 35% higher per clock and 57% faster in absolute integer performance at a similar 4.5 W. The current leading edge is further ahead again: the Apple M5 P-core is 60% higher per clock and 2.7× faster, the Arm C1 Ultra 45% higher and 2× faster. Matching older high-end cores per clock is a genuine design achievement. What Huawei cannot match is the voltage-frequency curve and transistor budget of leading-edge nodes, which let Apple, Qualcomm and others spend more transistors in the same area on wider cores, larger caches and deeper buffers while running at lower voltage. Huawei’s LogicFolding roadmap is one answer, stacking active logic to recover density and shorten signal paths. We return to it later. The GPU compute units (CUs) changed more visibly than the CPU cores, moving to a more rectangular layout for both the arithmetic logic unit (ALU) clusters and the CU overall. Even with ray-tracing support added, a CU shrank ~28%. However, that shrink is offset by the increase from 4 to 6 CUs and the area outside the CUs grew 33%. Overall, the GPU cluster is larger by ~10%. The GPU is where Huawei makes its biggest gains. The Maleoon 935 is not competitive with current flagships, but it is a large step up from the 920 and reaches older-flagship territory. In 3DMark it is 70% faster in Wild Life Extreme (WLE) and 79% faster in Steel Nomad Light (SNL) than the 920; with 11% higher clocks and 50% more CUs, the ~67% theoretical uplift roughly matches WLE and is beaten by SNL. It edges ahead of the Snapdragon 8+ Gen 1 in WLE and SNL, and the Dimensity 9200 and Apple A16 in WLE, but stays far behind newer parts: the Snapdragon 8 Elite Gen 5 and Dimensity 9500 are ~2.4–2.6× faster in WLE and ~3.2× faster in SNL. The Maleoon 935 is Huawei’s first GPU with hardware-accelerated ray tracing; there it lands slightly ahead of the Exynos 2200, and on par with the Apple A16, with current flagships up to 3.7× faster. The Neural Processing Unit (NPU) saw the largest structural changes of any block, moving from a Lite and a Tiny core in the Kirin 9020 to a Lite and two Tiny cores in the Kirin 9030. Both core types also show significant layout changes. This is a reversal in Huawei’s NPU design. The Kirin 9000 5G, its last flagship chip on TSMC N5, used two Lite and one Tiny core. The series of SoCs on SMIC N+2 moved to one Lite and one Tiny core, likely for area savings. With the Kirin 9030, Huawei has shifted back toward a larger multi-core NPU cluster, but with the additional area going to a Tiny core rather than a Lite core. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Before diving into the process stack, the package and memory are worth separating from the SoC itself. The Pro variant of the Kirin 9030 carries 12 GB of Samsung DRAM, with two stacks of four dies each. The dies were identified as the K4L2E165YD, a 12 Gb LPDDR5X-9600 device fabricated on Samsung’s 1a node, the fourth generation of its 10 nm-class DRAM after 1x, 1y and 1z. 1a has shipped in volume since 2022, so this is current memory rather than older-node inventory. The 16 GB Pro Max variants we obtained were found with both CXMT and Samsung packages. The CXMT package is marked CXDD7JEDM, with two stacks of four dies, packaged in week 45 of 2025. The inferred die dimensions from X-ray computed tomography (CT) are consistent with a known density of ~0.3 Gib/mm² for the CXMT G4 process, roughly equivalent to other manufacturers’ 1z processes. The Kirin 9030 uses a typical integrated package-on-package (iPoP) stack: multiple DRAM dies in a memory package sit above an organic redistribution layer (RDL) interposer, which sits above the SoC and package substrate. The full package is then mounted to the printed circuit board (PCB) through ball-grid array (BGA) solder bumps. The memory package substrate is a thin bismaleimide-triazine (BT) laminate carrying the LPDDR5X stack. The organic RDL interposer over the SoC routes the PoP signals around the die and carries possible dummy thermal copper pillars. The package substrate, a thicker Ajinomoto Build-up Film (ABF) build-up over a BT core, fans the flip-chip bumps out to BGA pitch and embeds the power planes. The whole stack is organic. The only silicon is the SoC and the LPDDR5X dies; there is no silicon interposer. Keeping it all-organic brings the package’s coefficient of thermal expansion (CTE) close to the PCB’s, reducing board-level warpage, and avoids the cost of a silicon interposer the SoC’s bandwidth does not need. In an iPoP stack, the memory package connects to the organic RDL interposer through an array of solder bumps. Underfill fills the gap around those bumps, adding stiffness and protecting the joints from mechanical stress. The Pro and Pro Max variants differ here, which we cover behind the paywall. The die shot and architecture tell us how Huawei allocated its silicon budget. The process tells us what SMIC can manufacture. We use the Helio G99 as the process reference for TSMC N6. Both SMIC N+3 and TSMC N6 are evolutions of previous 7 nm-class nodes. We used targeted TEM cross-sections through logic and memory regions, imaged in both fin-cut and gate-cut directions. Each cross-section caption gives its horizontal field width (HFW), the real width of the imaged area. We start at the transistor fins, then move up through standard cells, local interconnect, and SRAM. SMIC has not overtaken Intel or TSMC. It uses aggressive DUV scaling and DTCO to reach N6-class density, but that density doesn’t translate into comparable performance and efficiency, for two reasons: the node gap to leading-edge nodes, and Huawei’s core designs. Fin Profile One of the most important knobs in a FinFET process is the fin profile: the shape of an individual fin and the channel where current passes from source to drain. The ideal fin is tall, narrow, and nearly vertical. A taller fin increases effective channel width, while a narrower fin improves electrostatic control by thinning the body the gate must control. Push either too far, and the process pays for it: weaker drive current, fragile fins, taper, footing and line-edge variation that hit yield and device variability. The Intel 22 nm, 14 nm, and 10 nm fin cross-sections show how FinFET nodes have improved over time. 22 nm fins were a first-generation structure, relatively short, wide and strongly tapered. The shape limits current density and reduces gate control uniformity across the height of the fin. At 14 nm and 10 nm, Intel pushed the fins taller and narrower while also making the sidewalls more vertical. Rather than shrinking the device, these changes increase the effective channel width per fin and improve electrostatic control. The trade-off is that taller fins at tighter pitches are much more difficult to manufacture. Now, let’s compare the Helio G99 on TSMC N6 with the Kirin 9030 on SMIC N+3. Both processes are in the same class, with fin pitch of 30-32 nm on N+3 and 34 nm in our N6 cross-section. The pitch for N6 is especially interesting as N7’s HD library is generally listed with a 33 nm fin pitch, and N6 did not shrink pitches directly. Its density gains came from DTCO instead of tighter pitches. The 34 nm pitch was stable across our sampled region and serves more as a comparison against the SMIC N+3 we have not investigated further. Pinning down N+3’s fin patterning scheme takes more than one core unit. The CPU cores show a dense ~32 nm pitch, with the pitch between N-P fin pairs alternating between 78 and 88 nm. Logic alone may be consistent with dual-pitch mandrels of 120 and 110 nm, but this is a complex and unusual approach. Combining the pitch from the the 8T SRAM, which has more complex repeat unit, with the CPU core sequence allows us to reverse engineer the patterning steps with more confidence. As both the logic and SRAM should share the same base grid, a single CD mandrel lithography pattern with 128 nm pitch undergoing SAQP produces a die-wide ~32 nm grid (128 nm/4), which supports the pitch sequencing seen in both logic and SRAM cells. In the sampled cross-sections, N+3 shows a taller, narrower, higher-aspect-ratio fin than N6. The measured fin aspect ratio is ~9.5:1 on N+3 versus 7.8:1 on N6. N+3 also shows less top rounding, with an estimated radius of ~2 nm, compared with 2.8 nm on N6. Even though the fin widths differ, the ratio of top rounding to fin width tells the same story, with N+3 at 0.37 and N6 at 0.44. In a geometric sense, lower is better; a perfectly rectangular fin would have no top-rounding penalty. These are single-digit-nanometer features measured from a handful of cuts, so treat the absolute numbers as approximate. The important result is the relative gap: N+3’s fins are consistently taller, narrower and less rounded than N6’s. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Standard Cell A standard cell is the basic building block of chip layout: a fixed-height row pairing one NMOS and one PMOS transistor that share a gate, tiled in a grid to build logic blocks. The key dimensions are contacted gate pitch (CGP), cell height (CH), fin count, and the lower-metal routing grid. To measure density, we use the Bohr metric: a weighted average of NAND2 gate area (60%) and scan flip-flop area (40%). This represents a realistic mix of combinational and sequential logic. This metric has its limitations, especially for complex cell layouts like TSMC’s FinFLEX, which alternates cells with different fin counts. Even so, it is the best metric for a pure process-level comparison. Another important measurement is the fin pitch; it refers to the distance between two fins of the same transistor. In a FinFET process, multiple fins are used in each transistor to increase the drive current and thus performance. TSMC N6 ships both a high-density (HD) library with 2 PMOS and 2 NMOS fins per cell, and a high-performance (HP) library with 3 of each. More fins under the shared gate mean more effective channel width. HP cells switch harder at the cost of area. Designers mix the two on a die, primarily spending HP cells on timing-critical paths, and matching their PPA targets. In the Cortex-A55 core of the Helio G99, we found a cell height of 240 nm for the HD cell. MediaTek has used HD cells in the G99 to minimize die size and thus cost. As an SoC for budget smartphones at ~$100, this is essential. By contrast, we found only one library in the Kirin 9030, with 2 NMOS and 2 PMOS fins. This suggests a narrower library strategy than TSMC N6, where both HD and HP libraries are widely used. This likely reflects the smaller customer base and the more constrained domestic design and electronic design automation (EDA) ecosystem. In all three CPU cores of the Kirin 9030, we found cell heights of 228 nm, 5% smaller than on N6. This is also a reduction of 9.5% over SMIC N+2’s cell height of 252 nm. SMIC N+3 and TSMC N6’s HD library both feature a CGP of 57 nm. For SMIC, this is a 9.5% shrink over N+2. In the past, CGP and cell height alone may have been enough to compare transistor density. Now, however, we must consider scaling boosters and DTCO as well. SMIC’s density gain does not come from EUV. It comes from using every available DTCO booster aggressively. First is fin depopulation: reducing the number of NMOS and PMOS fins in each cell. The first FinFET nodes started with 3 or 4 fins for each transistor. SMIC N+3 and TSMC N6 HD both use only 2 fins per transistor, trading drive strength for density. Next is contact over active gate (COAG). By landing the gate contact directly over the active gate, instead of out over the isolation region, the cell height drops. N+3 integrates COAG while N6 does not. Our N+3 gate-cut cross-sections indicate COAG, with the gate contact sitting over the active region, while N6 shows an off-gate contact. Last is single diffusion break (SDB). Diffusion breaks are inserted between cells in the same row to provide electrical isolation, but they also introduce local layout effects (LLE), layout-dependent shifts in electrical characteristics. In the past, a double diffusion break was used, consuming the space of two CGPs. SMIC N+3 and TSMC N6 instead use SDB, saving area but increasing LLE sensitivity. This must be controlled at the process level and accurately modeled in the process design kit (PDK) so that EDA tools can account for it. Overall, SMIC N+3 has a transistor density of 113.4 MTr/mm², slightly above TSMC N6 at 107.7 MTr/mm². Even without EUV, SMIC has achieved density beyond TSMC’s mature N6 node which utilizes EUV. Metal Stack The smallest critical dimension in the teardown is M0; SMIC N+3 uses a 32.5 nm local metal pitch. That is smaller than the 36 nm M0 pitch on Intel 18A in Panther Lake. However, this does not mean that SMIC has a better process than Intel 18A or TSMC N3P. M0 is a local intra-cell routing layer. Its usefulness depends on the full interconnect stack: M1 and M2 pitch, track count, via and line resistance, design rules, mask count, overlay control, and routing flexibility. The 32.5 nm M0 is consistent with self-aligned quadruple patterning (SAQP), whose four-population line-width loading we read coarsely as alternating widths of 21.5 to 24 nm; M1 and M2, at 38 and 40 nm, are consistent with self-aligned double patterning (SADP), a single A/B split. On TSMC N6, M0, M2, and M3 sit at a relaxed ~40 nm and are consistent with SADP-class double patterning, with no need for quadruple patterning. That said, we measure M2 for example at ~43 nm, likely inflated by sparse routing. We do not assign any specific layer to EUV from our cross-sections; the distinction we can draw is double versus quadruple patterning, not lithography wavelength. Transistor-level density in the front-end-of-line (FEOL) sets an upper bound, but the design is ultimately limited by what the interconnect stack can route. The lowest metals are the most important for standard-cell density, but the semi-global and global layers determine how usable that density is at the block and chip level. Two axes are commonly used for chip cross-sections: the fin-cut and the gate-cut. The micrograph above is a fin-cut and shows metals 0 through 3. This axis lets us see the even-numbered metals, with M0 right above the fins. There are two kinds of M0 lines. The first are the power rails; these are wide wires for the VDD and VSS running horizontally at the top and bottom edges of each standard cell. The wide wires measure 55 nm across, more than double the other M0 lines. Their width minimizes resistance and reduces IR drop. The second kind are intra-cell wires, short segments within the cell that connect terminals to M1. These have alternating widths between 21.5 and 24 nm. The M0 pitch is 32.5 nm, a 19% reduction versus N+2 and N6. At this pitch, DUV patterning requires more aggressive multi-patterning, increasing mask count, overlay sensitivity, process complexity and cost. M0 is below what a single DUV-defined spacer (SADP) can resolve, so SMIC cascades a second spacer step (SAQP). The cross-section reflects the cost: the M0 trenches are visibly more re-entrant (narrower at the bottom than the top) than M1 or M2 on the same chip and carry a bright barrier-rich foot where the trench meets the etch-stop layer. That shape is partly the intended damascene profile, as a slightly narrow bottom helps void-free copper fill, but its magnitude at M0 is driven by the tight pitch and the higher trench aspect ratio. Intel 18A supports an M0 pitch of 32 nm, although Panther Lake has only shipped with a looser 36 nm pitch. This is due to Intel’s heavy usage of HP libraries. Among leading-edge nodes, 18A has the loosest M0 pitches due to PowerVia. With power routing moving to the backside, congestion is reduced, and the entire front-side metal stack can be used for signal routing. M2 is the first true inter-cell routing layer. It runs horizontally like M0 but spans across multiple cells to carry block-level signals. The M2 pitch sets the cell’s track height – the number of M2 tracks that fit between the VDD and VSS rails, defining what the library calls a 6-track or 7.5-track cell. This layer is the most important, limiting the routing of entire blocks. SMIC N+3 features a 5.7-track cell. The M2 pitch is 40 nm, a 5% decrease over N+2 and the same as N6. This shrink keeps the pitch at the edge of what is possible with double patterning. Future nodes will need to increase the number of masks for M2 as reducing the number of tracks is much harder due to the limitations in routing. The micrograph above is in the perpendicular direction, the gate-cut, and shows metals 0 through 4. This allows us to see and measure the odd-numbered vertical metal layers. The M1 pitch is 38 nm, 9.5% less than N+2 and 33% less than N6. The M1-to-gate ratio matters because it sets local routing flexibility. N+2 and N+3 use a 3:2 ratio, while N6 uses a 1:1 ratio, explaining the huge differences in M1 pitch. The more M1 lines there are compared with the gates, the more flexibility there is for power and signal crossing within the cell. Routing flexibility enables more complex and better cells. Clean fractional ratios are also preferred as a grid is periodic and improves layouts. The 3:2 ratio gives SMIC more local routing flexibility than a strict 1:1 grid, but it also complicates layout and patterning. This is a DTCO choice, with SMIC increasing process complexity to recover density and routability without EUV. This 3:2 ratio is not very popular in the leading-edge nodes. TSMC has only used it on N7+, the N5 family, and the short-lived N3(B). They have switched back to a 1:1 ratio for N3E. Intel has only used it on the 10 nm/Intel 7 family, with Intel 4, 3 and 18A all using a 1:1 ratio. Samsung is the only one still using a 3:2 ratio at the leading edge, using it in the SF4 and SF3 families. It remains to be seen if SMIC will remain at a 3:2 ratio or move to a 1:1 ratio with its future nodes. The industry is still actively exploring these local-routing ratios. At VLSI 2026, imec will be presenting work on even higher ratios, including a 2:1 scheme that can reduce area by up to 14%. We will be covering the conference in a future newsletter article. Subscribe We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. The final local interconnect layer for N+3 is M3, with a pitch of 44 nm. The M3 pitch is the same as on N+2 and 10% larger than on N6. The semi-global layers carry the majority of block-level signal routing. They have a coarser pitch than the lower local layers. On leading-edge nodes, they are designed to sit at the limit of DUV single patterning. M4 through M11 pitches were found divided between 80–82 nm (M4–M6), 128 nm (M7–M10), and 148 nm (M11). Given limited sampling, it is possible these are divided further in dense routing areas. At the top are two giant metal layers, M12 and M13. These have kept the same pitches as N+2 at 1920 nm and 4600 nm respectively. While the lower layers’ pitches are generally fixed by the process and library, the upper layers vary much more in pitch and count, depending on the design. Even two smartphone SoCs on the same process can have wildly different metal stacks. The Helio G99 carries fewer routing layers, reaching coarse metal pitches of 850 nm by M9, while the larger and higher-performance Kirin 9030 keeps fine pitches until M11. SRAM At the leading edge, SRAM is much more difficult to scale than logic. TSMC’s latest nodes have seen little to no bitcell scaling, while logic still has more DTCO levers to pull. While looking for other logic libraries in the GPU compute units, we stumbled upon the SRAM. The most common type of SRAM has 6 transistors (6T), but this cell had 8 transistors (8T) instead. 8T SRAM adds two transistors to form a dedicated read port. Unlike a 6T cell, where reading disturbs the storage, the decoupled read port removes read-disturb, improving read stability and letting the cell be pushed harder for performance. At first glance, the cut looked like an unusual logic library, with each cell row having 3 fins of one polarity and 5 fins of another. The rows also alternated in orientation. Energy-dispersive X-ray spectroscopy (EDS) resolved our confusion. The cut had not landed on the GPU logic, but on the SRAM macro beside it. The unusual fin pattern was due to the SRAM library. We return to EDS in the process flow analysis behind the paywall. SRAM libraries are not like traditional logic libraries. Due to the unequal number of PMOS and NMOS transistors, they require specialized rules and layout libraries. They do not need the flexibility of logic libraries, so they are hyper-optimized for one purpose: dense, reliable memory. The SRAM cell we found is a 1:2:2-2:2 cell. This means there is 1 fin per pull-up (PU) PMOS transistor, and 2 fins per pull-down (PD) and pass-gate (PG) NMOS transistor. These 2 PU, 2 PD and 2 PG transistors would usually form a single 6T high-current cell (HCC). An 8T HCC adds a read-pull-down (RPD) and a read-pass-gate (RPG) NMOS transistor, each with two fins. We measured a cell height of 406 nm, which brings the bitcell size to 0.0463 µm². That is a theoretical peak density of 21.6 Mib/mm². We estimate that a 6T HCC would have a cell height of 292 nm and a size of 0.0337 µm². This is ~12% larger than a 6T HCC on Intel 3 and 4. We also estimate the 6T high-density cell (HDC) to have a cell height of 228 nm and a size of 0.0260 µm². This is coincidentally the same as the logic standard-cell height measured earlier. The estimate puts the cell near Samsung 7LPP/5LPP and slightly below TSMC N7/N6. That is a theoretical peak density of 38.5 Mib/mm². 6T HDC is arguably the most important cell as it is used for the largest caches in a chip, the L3 caches and system-level cache (SLC). Both the Kirin 9020 and 9030 have split the SLC into 4 banks to raise total SLC bandwidth. In the Kirin 9030, the SLC increased from 2 MiB to 3 MiB per bank. Correspondingly, the number of arrays within the bank also increased by 50%, from 16 to 24. Each array can store 128 KiB and forms an orderly pattern on the die shot. From the Kirin 9020 to the Kirin 9030, the area of a 128 KiB SLC array decreased from 0.0477 mm² to 0.0392 mm², an 18% shrink. The achieved density is 25.5 Mib/mm², 66% of the theoretical maximum. While the SLC was quite similar across both chips, the L3 has seen some major changes, particularly in terms of its layout. The total capacity also went up from 10 MiB to 12 MiB. Much like the SLC, the L3 is also split into 4 banks. In the Kirin 9020, an L3 bank consisted of 16× 128 KiB arrays and 16× 32 KiB arrays. However, an L3 bank in the Kirin 9030 instead consists of 48× 64 KiB arrays. In the Kirin 9020 L3, a 128 KiB array was 0.0513 mm² and a 32 KiB array was 0.0154 mm². The size of the 128 KiB array is different on the L3 and SLC as the assist circuitry for the two arrays differs depending on their purpose. In the Kirin 9030 L3, a 64 KiB array is 0.0210 mm². Although not a like-for-like comparison, normalized for capacity, it is 18% smaller than the 9020’s 128 KiB L3 array and 31% smaller than its 32 KiB L3 array. The achieved density is slightly lower than the SLC, at 23.8 Mib/mm², 62% of the theoretical maximum. Unlike the L3 and SLC, the prime cores’ private L2 cache uses a 2-bank design. As the prime cores’ L2 is latency-critical, it likely uses 6T HCC instead of 6T HDC. The 9020 has 16 arrays in each bank while the 9030 has 32. Each array has a capacity of 32 KiB. A 32 KiB array in the L2 shrank from 0.0171 mm² to 0.0142 mm², ~17% smaller. The density is 17.6 Mib/mm², ~59% of the theoretical maximum for 6T HCC. SRAM scaled well from N+2 to N+3, shrinking by ~19%, close to the theoretical logic shrink. The caveat is that N+2’s bitcells were unusually large, bigger than comparable 7 nm-class nodes, so part of the gain is catch-up rather than true scaling. With the insights from STEEL’s teardowns, we will be doing a deep dive into SRAM in a future newsletter article. Subscribe Everything above came out of a single STEEL teardown: die annotation, block-level area analysis and TEM cross-sections through logic and SRAM. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Future Roadmap The same cross-sections that pin down N+3 also show where SMIC can go next. Although N+3 is already close to the practical limits of DUV multi-patterning in several layers, SMIC still has a few scaling levers left. A theoretical N+4 would likely start with cell height. N+3 uses 5 M0 tracks between its power rails. Moving to 4 M0 tracks, as on SMIC N+2 and TSMC N6, could reduce cell height by roughly 15%. The routing grid is only one side of the shrink; the front end also must fit into the smaller cell. One possible FEOL lever is reducing the p-to-n isolation spacing from two diffusion grid units to one. Intel used this scaling booster on Intel 4, and TSMC did so on its N3 family. This path trades layout flexibility for density. Fewer M0 tracks reduce local routing resources, while tighter p-to-n spacing raises integration and design-rule difficulty. M2 is also constrained by the cell height shrink. For SMIC to maintain a ~5.7-track cell, M2 would need to move toward ~35 nm. That would move another layer into SAQP territory. SMIC could also reduce the CGP from 57 nm to 54 nm. Intel reached a similar CGP on Intel 10 nm/Intel 7 without EUV. The local interconnect is also tougher. If SMIC keeps the 3:2 M1-to-gate ratio, M1 would need to shrink to 36 nm and would likely require SAQP as well. If SMIC moves to a 1:1 ratio, M1 could relax to 54 nm, but it would give up routing flexibility. Under this theoretical path, we estimate that SMIC N+4 could reach a cell height of 198 nm and a CGP of 54 nm, implying a Bohr density of 137.8 MTr/mm², on par with TSMC N5 or Samsung SF4. However, the difficulty is cumulative. Each step is individually plausible, but together they make N+4 harder than the transition from N+2 to N+3. It will likely take longer, cost more, and carry less process margin. A theoretical N+5 would require a larger integration shift. One possible path is backside contacts (BSCon), moving power routing and source/drain contacts to the backside, which would reduce front-side routing pressure and enable another reduction in cell height. The front-side metal pitches could relax to reduce the process complexity. M0 would likely relax slightly to ~34 nm, and M2 and M4 pitches could relax further. CGP is unlikely to shrink much further. Even with EUV, 48 nm has been the practical limit for yield and process control. This approach would allow N+5’s cell height to fall to 170 nm and its CGP to 53 nm. This implies a Bohr density of 163.6 MTr/mm², on par with Intel 18A’s HP library. However, this would not make N+5 cost-competitive with the leading edge. It would reach a similar density through a much more expensive route. The integration difficulty rises sharply, with new process flows for backside alignment, wafer thinning, contact reveal, and backside metallization. Past this point, standard density and interconnect scaling become increasingly unattractive. That is where Huawei’s roadmap stops looking like a normal foundry roadmap and starts looking like a packaging roadmap. At ISCAS 2026, Huawei unveiled its tau (τ) scaling law, reframing process scaling in the time domain. τ is the time cost of data movement and processing: switching delays in transistors, RC signal propagation delays in circuits, compute, memory, and networking latency. Outside Huawei’s terminology, this is called system-technology co-optimization. This is Huawei’s answer to its lack of EUV lithography. Without EUV, planar density cannot keep pace with TSMC, Intel, or Samsung. If transistor density cannot shrink further, Huawei’s alternative is to shorten wires, reduce buffering, and stack logic vertically. “LogicFolding”, Huawei’s implementation of this new scaling idea, is, in practice, an aggressive 3D stacking approach. AMD V-Cache places SRAM above or below a CPU die. AMD’s MI350X places active interposer dies (AIDs) underneath accelerator and compute dies (XCDs), with the AIDs handling cache, IO interfaces, the network-on-chip (NoC) and embedded metal-insulator-metal (MIM) capacitors. With LogicFolding, parts of the same logic block are split across multiple active dies bonded face-to-face at ultra-fine pitch. This allows Huawei to shorten some critical paths and reduce buffer overhead, not merely add cache capacity or offload the IO and interconnect. Shortening wires is where the higher clocks come from. A large share of a modern core’s delay and energy budget goes into driving long interconnects and the repeater buffers along them. LogicFolding distributes a block’s critical-path gates across multiple stacked tiers bonded at a very fine pitch, so the bond interface behaves like an additional metal layer and the longest paths get shorter. That is how Huawei expects to recover frequency and efficiency it cannot get from the process alone. Huawei’s roadmap shows its intent. Prime core frequency is targeted to rise from 2.75 GHz in the Kirin 9030 to roughly 5 GHz by 2031, far beyond what planar scaling alone could deliver. Prime cores with 3.1 and 3.39 GHz clocks are being tested in its labs, although their power consumption is unknown. Beyond that, chips are in the design, simulation or pathfinding phase, meaning the frequencies are targets. However, the direction matters more: LogicFolding also helps with performance, not just density. The catch is that Huawei’s density claim is not directly comparable to foundry densities. A stacked design can report more transistors per package footprint by adding active layers, even if each patterned die remains well behind TSMC or Intel in front-end density. This is how Huawei can claim to reach foundry 14A-equivalent density by 2031. This is not a like-for-like foundry comparison, with Huawei using stacked logic and measuring density per package footprint. On a normalized Bohr-density basis, SMIC N+3 is ~114 MTr/mm², 38% less than Intel 18A’s HD library. Huawei’s 3D roadmap closes the gap by stacking active logic, reaching 215 MTr/mm² by 2030. In 2031, the roadmap density jumps to 295 MTr/mm², implying either a third active layer, partial EUV insertion or aggressive planar DUV scaling. Huawei’s methodology makes other foundries look much denser as well. Applying it to AMD’s MI450X with an N2 top die on an N3P base die yields a theoretical density of 460.2 MTr/mm² in 2026, compared with Huawei’s 295 MTr/mm² in 2031. This Kirin 9030 does not use LogicFolding, remaining in a conventional mobile SoC package. Instead, it forms the baseline for how far Huawei and SMIC can push planar scaling. Future teardowns of Kirin and Ascend chips will show both planar logic density and Huawei’s hybrid bonding solutions. Export controls changed China’s optimization problem rather than ending it. EUV restrictions raised the cost and complexity of leading-edge manufacturing without freezing it. SMIC reaches N6-class logic density through DUV immersion, SAQP and DTCO, while Huawei shifts more of the burden onto architecture, packaging and system-level integration. Future nodes will be tougher. N+3 still had room to tighten local metals and reduce cell height and CGP. Further scaling without EUV leaves fewer levers. More aggressive multi-patterning adds masks and overlay error. SMIC can keep pushing DUV, but each step will get more expensive and less forgiving. The design side is just as critical. Huawei had domestic EDA tools and flows before the Kirin 9030, with the Kirin 9000s, 9010 and 9020 making that clear. Huawei was able to ship multiple consumer SoCs on SMIC N+2 and N+3 while cut off from the Western EDA stack. US export controls restricted EDA tools for advanced chips in 2022 but did not target tools for more mature chips. In 2025, the US government briefly placed much broader restrictions on EDA software from Synopsys, Cadence, and others, before lifting them less than two months later as part of a trade deal tied to rare earths. Huawei has been unable to access those tools because it remains on a US trade blacklist. That forced Huawei, SMIC and Chinese academic institutions to build their own tools and flows. Researchers at Peking University recently announced a prototype EDA tool for Huawei’s LogicFolding architecture, which requires a new flow to handle the multilayer layout and floorplan. This is not the same as replacing the full Synopsys or Cadence stack, but it shows where domestic EDA is headed: toward tighter co-optimization between architecture, process and packaging. These advances are also diffusing into the Chinese ecosystem. SMIC is licensing its N+2 and N+3 processes to HLMC/Hua Hong at the government’s direction rather than by choice. If the same process learning feeds into Ascend accelerators for AI training and inference, the choke point shifts from one named fab to an ecosystem. Alibaba’s T-Head silicon arm and Cambricon, a Chinese AI chip designer that is expected to supply ByteDance, could also be major beneficiaries. Sanctions aimed at SMIC alone become less effective once the manufacturing knowledge has spread to other fabs and design houses. China is not closing the gap with Intel, Samsung and TSMC. The teardown shows the opposite in several places: no EUV, no backside power, higher process complexity, and visible trade-offs. But China is still advancing. If domestic chips become good enough for phones, inference, networking and security-sensitive workloads, they can matter strategically without matching TSMC at the leading edge. Behind the paywall, we show what else STEEL can do, with material and process flow analysis of SMIC N+3, and analysis of the Kirin 9030 package. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline, access the full Kirin 9030 and SMIC N+3 analysis or to commission a custom teardown, contact sales@semianalysis.com.
BIG3 BASKETBALL to Go Public Through Business Combination with Graf Global Corp.
BIG3 HoldCo LLC (“BIG3”), recognized as the world’s premier professional 3-on-3 basketball league, founded by O’Shea Jackson (Ice Cube) and Jeff Kwatinetz, a...
How Revolutionary Politics Make Art and Spirituality, Better
What if I told you, there’s a dynamic combination of art, politics and spirituality? One that fits our needs. One that fits this moment. It is Mass Line politics and American Romanticism.
How voting, political participation and news sources differ across political typology groups
Pew Research Center’s political typology sorts Americans into nine groups based on their political values and attitudes. Some groups are very ideologically consistent and deeply partisan, while others represent different combinations of values and are more ideologically mixed. But the groups also vary in the relative importance they place on politics itself and the extent […]
BOXABL and FG Merger II Corp. Stockholders Approve Business Combination
BOXABL Inc. ("BOXABL") and FG Merger II Corp. (Nasdaq: FGMC) ("FGMC"), a publicly traded special purpose acquisition company, today announced that stockholders of FGMC and BOXABL voted to approve the previously announced business combination between FGMC and BOXABL (the "Business Combination") at their respective special meetings of stockholders held on June 9, 2026 (collectively, the "Special Meetings").
BOXABL and FG Merger II Corp. Stockholders Approve Business Combination
/PRNewswire/ -- BOXABL Inc. ("BOXABL") and FG Merger II Corp. (Nasdaq: FGMC) ("FGMC"), a publicly traded special purpose acquisition company, today announced...
We can create the future of science right now
Paul Litvak is the founder and Executive Director of the Robyn Dawes Institute and a Visiting Scholar at UC Berkeley. He has a PhD in Behavioral Decision Research from Carnegie Mellon where he studied emotions and the sunk cost bias. Over 15 years in industry, he solved a wide range of challenging technical problems. At Meta he created models optimizing the ad review process. At Google he ran experiments to measure social influence. At Airbnb, he was a product manager leading machine learning teams optimizing search ranking and price suggestions. He also co-founded and led product at Rhythmic Health, a venture-backed biosensing startup, creating an accurate low cost system using a color changing strip and a smart phone to measure salivary lactate. The bottleneck At this point, it is uncontroversial to say that science needs to stop using the PDF article as the unit of knowledge and currency. The unbearable slowness of scientific publishing, the profit motive and margins: I’m not saying anything new. The PDF also sucks because it’s hard to extract structured information, which makes it hard to do evidence synthesis. As a result, we do much less evidence synthesis than is needed. And evidence synthesis ultimately undergirds most policy and medical decision-making. I can see second-by-second real-time odds for any sporting or newsworthy event, but a school board can’t see the best evidence on whether their 8th graders should be taught algebra. As a society, we don’t treat this as an important problem. Again, not controversial. Not only is the problem well understood, but the solution has already been laid out. What we need is AI-assisted living evidence synthesis - (1) an open knowledge graph of atomic claims, (2) claims linked to evidence, (3) assessment and synthesis of each piece of evidence, and (4) continuous updating with new data. What few realize (yet) is that the technical capacity to build this vision for a significant portion of science already exists. Not only that, scientists and startup teams are already building many of these components. I know this because I’ve been surveying the space and talking to many of the builders. There are some missing pieces: for example, evaluations of how well some of the components work. But at this point, most of what’s missing is a fully end-to-end working integration of all of these parts. In the rest of this essay, I’m going to lay out all the parts of a working living evidence layer for science and who is working on them, and propose concrete next steps for building this system. What’s now possible The diagram above outlines the components of a living evidence synthesis platform, including some of the teams working on each component1. Scientific PDFs are processed into claims with associated evidence. The evidence is subjected to a forensic audit, methodological evaluation and robustness and reproducibility checks. Finally it’s given a weight in a continuously updating synthesis. What follows is a description and status of each component and a few of the teams working on them. Document understanding The first thing you need to be able to do is turn an article into structured data. Mostly that means parsing PDFs. There are often multicolumn layouts that confuse non-specialized PDF to text processing libraries. For scientific papers, there is the added complexity of parsing formulas and tables and figures. This is a really hot area - there are startups offering APIs, and it seems like a new open source package gets posted to Github every few weeks. What follows isn’t exhaustive. A package called GROBID was the state of the art for a while, they didn’t update their package for nearly two years until very recently. In the meantime reducto.ai released an AI powered PDF extraction API, PaddleOCR became popular, IBM released a model called Docling, and both Mistral and Gemini created models and libraries. I also know of at least one other well-funded psychology research group working on a paper parser. By contrast, there are few open evals in this space, with no extensive evals for complex table comprehension in particular. Nonetheless, I’m confident this will be a solved problem soon, given the combination of LLM advances and developer interest. Hypothesis level extraction There has been increasing interest in comprehending the extracted text of papers and linking information to evidence for each hypothesis. A lot of work has already been done. Trialstreamer (Marshall et al. 2020) and RobotReviewer LIVE (Marshall et al. 2023) demonstrated automated extraction of trial population, intervention, and outcome at scale on clinical RCTs. PaperQA2 (Skarlinski et al. 2024) and Ai2 ScholarQA (2024) extended this to retrieval-augmented question answering with citation grounding. Elicit, Consensus, and SciSpace operationalized claim-level extraction for end users. OpenEval (Booeshaghi et al. 2026) is the most recent and most ambitious: 1.96 million atomic claims extracted from 16,087 eLife manuscripts using Claude Sonnet 4.5, grouped into ~299,000 results, with LLM evaluations showing 81% agreement with human peer review on a 2,487-paper subset. None of these solutions link claims to test-statistics, as you would need to evaluate randomized controlled trials. This is why I built the evidence.guide API - to extract hypotheses and associated test statistics from behavioral science papers. The best public eval of this kind of extraction I’m aware of comes from the recent SCORE project - they had humans code thousands of psychology papers to extract their claims by hand. It would be extremely helpful to the world if all scientific PDFs were available as structured open data. I’ve been working to make this happen, both directly at Berkeley and through coordination with large entities I can’t yet speak of; as hard as it is to do, I think it’s possible2. Forensic audit A lot of work has been done on forensic audit, but some gaps remain. Of course, for biology papers that rely on images for evidence, there are a variety of tools (notably Proofig and ImageTwin) to spot anomalies. These are still well short of what sleuths like Elizabeth Bik can do on her own, but these tools are constant companions among fraud analysts. There’s someone working on auditing Excel files for anomalies, and a number of teams are automating numerical checks like GRIM and SPRITE, including Scrutiny project, the INSPECT-SR team as well as statcheck. The regcheck team is building a way to use AI to compare preregistrations to analyses in papers, to ensure there aren’t significant deviations. Nonetheless, there are many other kinds of anomalies to screen for, both public and less publicly known. And there are no formal evals for anomaly detection that I’m aware of. Still, there’s a lot to draw from in this space and I’m pretty certain we will be able to scan papers for most kinds of obvious anomalies in the near future. Methodological review This area has been white hot, though I fear for many of the startups in this space, because this capability may become commoditized. There are at least six different AI peer review companies, including Refine.ink, Reviewer3, ReviewerZero.ai, Q.E.D. Science, Paper Wizard, and Isitcredible. Coarse (a pun on refine) was also recently created as an open source alternative. These systems provide qualitative feedback on the content of papers, spotting methodological weaknesses and mathematical errors. They seem to work pretty well, and many academics report bitterly that they exceed the average quality of typical peer reviewers. But there are few evals here either. What evals exist so far involve using LLM-as-judge (circularity problems abound) or comparing against human reviews of questionable quality. What you’d ideally want is an eval that measures capturing known errors in papers3. Reproducibility and robustness Another active area has been using AI agents to automate computational reproducibility4 and robustness5 checks in papers that report numerical results. For more recent papers where data and code are available, AI agents can see whether they can re-run the analyses and produce the numbers reported in the published paper. In addition to a handful of individual academics who have been experimenting using Claude Code for this, the Institute for Replication is a leading group working on building an end to end system. The evals related to this problem are the most mature, with CORE-Bench (Siegel, Kapoor, Narayanan 2024) and PaperBench (OpenAI 2025) available to benchmark agents on this task. There is also work on getting AI agents to test alternative ways of analyzing the data to ensure the results are robust to small analytic design choices. Synthesis This is the most underdeveloped area where significant investment is required. Although some automated evidence synthesis systems exist — for example, otto-sr is building an AI agent to write systematic reviews — none of these incorporate the full range of paper level signals to weight evidence appropriately. Nor is there anything like an eval or a gold standard for a good systematic review. Arguably Cochrane reviews are the closest we have to gold standard human systematic reviews, though I’ve heard academics in the know complain about their uneven quality. A key question for a synthesis platform is how to weight anomalies and methodological issues in assessing the quality of a piece of evidence. This is an unsolved problem and one I’m very keen to work on. Continuous updating There are many pieces of basic infrastructure available for monitoring for new research and initiating updates. OpenAlex is the current open citation graph. Retraction Watch integrated into Crossref in October 2023. Scite tracks how citations support, contrast, or mention prior claims. The Living Evidence Network demonstrated continuous-update workflows in clinical guidelines. Engineering this is a relatively straightforward task. When you look over this technical architecture and all the progress being made, it’s hard not to be optimistic that a living guide to scientific evidence will be built. The stakeholders are ready The social infrastructure for this is starting to coalesce — it’s not just a pie in the sky academic exercise to imagine this coming into existence. Institutions like the Center for Open Science, the Institute for Replication, the INSPECT-SR, the Living Evidence Network and more are all working on scaling work to improve research quality. Funders are also aligned. The Sloan Foundation has funded living evidence work through COS. Coefficient Giving supports the Institute for Replication and COS. The Astera Institute and the Institute for Progress have shown interest in this space. NIH has established an Office for Replication and Reproducibility. Although there are (very unfortunately) serious headwinds in science funding generally, there is an active group of funders interested in metascience. A brief word about what I’ve been doing at RDI. First, as a Visiting Scholar at Berkeley I’ve been actively figuring out how a non-profit and a public university can conduct and make public the results of large-scale academic article data mining. With some of the money I raised from donors, I commissioned a legal analysis of recent case law and publisher text data mining (TDM) agreements in order to understand whether a massive open data mining of academic articles is possible (with caveats, it is). I’ve also been working to bring together stakeholders in this space, and identify gaps. I’ve also been doing some software development in this space, with more to come. A pilot proposal The assumption undergirding all of this is that an AI, given all this information, would make the right judgment about a scientific claim with lots of conflicting evidence, weighing all the factors appropriately. That’s the hypothesis we need to test. Randomized control trial research is the best place to focus on first. RCTs are used to make many of the important decisions in society - from medical trials to public policy changes. And they use a relatively uniform set of inferential statistics with lots of known and available diagnostics. Behavioral science experiments, within the broader realm of RCTs, should be first used as a testbed whose results can be generalized. Because behavioral science is at the vanguard of open science practices, replications abound (there are thousands of them) to serve as ground truth training data. Key Hypothesis Therefore the pilot would test, in behavioral RCTs that have been replicated, whether the quality of evidence for a claim can be used to accurately predict whether that claim will replicate. Secondary Hypotheses Compared to claims that replicated, non-replicated claims demonstrate a greater share of forensic anomalies in their source literatures. Hypothesis level claim and statistic extraction is accurate enough to scale living evidence without onerous human review costs. Replication prediction is more accurate than prediction markets6 or journal prestige. If all the different quality signals we gather do accurately predict which studies will replicate, then we can use that model to score evidence to power the living evidence layer. Why this is informative regardless of outcome If the pilot succeeds, the architecture extends to medical RCTs (where Living Evidence already operates and integration is mostly about claim representation), then to slices of basic biology with stable replication structure. If it fails, the field learns which quality signals are load-bearing and which ones metascience has oversold. Either result is a contribution to knowing what the literature supports. Implications for funders Because this burgeoning ecosystem of builders already exists, a well-informed philanthropic or government funder could play a crucial catalyzing role in bringing this future about. They could play at least three roles: creating open structured datasets, publishing open benchmarks and incentivizing the solving of key technical challenges. First, open archives of papers that the government maintains, like PubMed, could be turned into structured data amenable to large scale metascience and claim aggregation. I know the US government already has an interest in doing this, though some key open questions remain unanswered. How do you determine the best models and systems for accurately extracting information from papers? How can you establish a robust way to allow researchers to flag errors and correct them? And finally, how do you create a legal regime in working with publishers to maximize the scope of available papers? For the latter, a university or a private philanthropy may be better positioned to make structured data publicly available under journal subscription terms or fair use. Philanthropists or government funders could also coordinate to create or commission benchmarks that evaluate whether important problems have been solved. For example, an open benchmark for claim extraction from a range of different scientific article types would be extremely helpful. Ensuring the underlying data are accurate is vital for creating these evaluations. I’ve discussed opportunistically using various human-created datasets for this purpose, but a consistent problem is that errors in human data make it difficult for them to serve as a gold standard. Finally, with structured data and benchmarks available, the government or private philanthropy could use them to incentivize groups to develop machine learning systems that meet these benchmarks. Prizes are one potentially valuable tool for this. For example, you could establish a prize for a system that accurately updates a living meta-analysis for a small set of claims. Prizes are particularly useful as signals of problem importance, and can help create vibrant ecosystems of public and private research—see, for example the role the government played in kickstarting the current work on nuclear fusion. Conclusion The drawbacks of the current scientific publishing system are known. Scientists agree, metascientists agree, philanthropists agree: the published PDF plus citation graph isn’t the right substrate for maintaining a representation of the evidence base in science. The pieces needed to build the alternative either already exist or are rapidly taking shape. The community is forming around exactly this problem, with concrete partnerships and shared infrastructure. A pilot should start on behavioral science RCTs because that’s the slice of empirical science most amenable to legibility, where replication ground truth is richest, and where the failure modes are best documented. What’s been missing is the galvanizing mission to assemble these pieces into something that works. That’s what I’m proposing to build. *** 1 I have a broader field map that I’ll release publicly soon. This is me, building in public! 2 If this is something that you are excited about, please reach out and talk to me. 3 More on this very soon too! 4 This tests whether, given the code and the data, you can get the same statistics as reported in the published paper. 5 This tests whether the results are the same as a paper’s given alternative analytical decisions in conducting the analysis (like outlier omission). Closely related is the idea of a “multiverse” where you come up with many different ways of answering the same underlying research question with the same data, and test whether the results hold in all those alternative methods. There’s been work on the latter as well. 6 Some of the replications, e.g. those from the SCORE project, had paired the experiments with forecasts from prediction markets. So we get to look at this for free.
Google's new open source Gemma 4 12B analyzes audio, video — and runs entirely locally on a typical 16GB enterprise laptop
For enterprise leaders aiming to decentralize their AI workloads, Gemma 4 12B offers a rare combination of edge-friendly efficiency and frontier-class reasoning.
The Science Behind the Quest for a Non-Peptide Oral Weight Loss Drug A
A combination of human and artificial intelligence has paved the way for a GLP-1 agonist that is effective when taken by mouth.
Mark Stone’s Return Showed Why He’s Golden Knights’ Glue Guy
The return of Mark Stone put the Las Vegas Golden Knights in their fourth Stanley Cup Finals in their nine-year history. He’s one of the best right-wing players in the league. It’s his combination of clutch scoring and understanding smart routes in the defensive zones that makes him a tough player to deal with. Mark […] The post Mark Stone’s Return Showed Why He’s Golden Knights’ Glue Guy appeared first on The Lead.
'We've Created an Amazing Trans-Atlantic Business': Winston Taylor Goes Live
Firm leaders say the integration of U.K. and U.S. offices was the heart of the deal closing Monday, noting the combination is already generating trans-Atlantic business opportunities.
This bizarre crocodile relative from the Triassic looked like an ostrich dinosaur
Scientists have discovered Labrujasuchus expectatus, a bizarre crocodile relative that looked more like an ostrich-like dinosaur than anything resembling a modern crocodile. It walked on two legs, had tiny arms, and sported a toothless beak—an unexpected combination for a member of the crocodile lineage.
Fertitta Entertainment Agrees to Acquire Caesars Entertainment in $17.6B Deal
HOUSTON, LAS VEGAS AND RENO, NEV. — Fertitta Entertainment Inc., a private holding company controlled by the NBA’s Houston Rockets governor (i.e. owner) Tilman Fertitta, has entered into a definitive agreement to acquire casino and gaming giant Caesars Entertainment (NASDAQ: CZR) for $17.6 billion. Fertitta Entertainment plans to finance the acquisition through a combination of equity, assumed Caesars’ outstanding debt (approximately $11.9 billion) and new committed debt financing arranged by a consortium of 10 banks. Under terms of the agreement, Caesars shareholders will receive $31 in cash for each outstanding share, which represents a 49 percent premium to the company’s unaffected stock price on Feb. 25 (the last trading day before rumors of a potential transaction were reported) — $20.77 per share. Upon completion of the transaction, shares of Caesars Entertainment common stock will no longer be listed on the NASDAQ stock exchange. Caesars operates several major Las Vegas Strip properties, such as Caesars Palace, Harrah’s, Paris Las Vegas, Planet Hollywood, Horseshoe, The LINQ Hotel, Flamingo and The Cromwell. Fertitta Entertainment owns Golden Nugget Hotels & Casinos and operates more than 450 full-service restaurants around the world, including Landry’s, Rainforest Café and Morton’s. According to the press releases issued by both companies,…
Caesars acquired by Fertitta Entertainment in $17.6B deal
The combination would bring Caesars’ iconic resort portfolio and digital gaming platform under the same roof as Fertitta’s Golden Nugget Hotels & Casinos and Landry’s restaurant brand.
Jays Beat Marlins, 2-1
Well, after a one day only engagement, the offence has gone back on hiatus. It didn’t end up mattering, though, as a combination of solid work from Kevin Gausman and the bullpen and questionable Marlins base running held them to only one run in spite of racking up 11 hits. The Jays are back within […]
Terra Quantum and Axiom Intelligence Acquisition Corp 1 Announce Definitive Business Combination Agreement at a $3.5 Billion Equity Valuation
/PRNewswire/ -- Terra Quantum AG ("Terra Quantum" or the "Company"), a global leader in quantum technologies, quantum security, and AI-driven optimization...
I tried Amazon's Bee wearable and am both intrigued and slightly creeped out
Like other AI wearables, Amazon's Bee offers an odd combination of convenience and privacy anxiety.
Surprising research reveals why you shouldn't add bananas to your smoothies
Researchers found that adding bananas to berry smoothies can dramatically reduce the body’s ability to absorb healthy flavanols. The surprising discovery shows that even simple food combinations can change how much nutrition your body actually gets.
UNC Health sought ‘partnership’ with WakeMed after Atrium merger announced
The Chapel Hill-based health system made its proposal on the day WakeMed and Atrium officials announced their planned combination.
The Estée Lauder Companies & Puig End Discussions Regarding a Potential Business Combination
On March 23, 2026, The Estée Lauder Companies Inc. (NYSE: EL) and Puig confirmed they were in discussions regarding a potential business combination, but unl...
Is AMC Entertainment (AMC) Quietly Recasting Its Premium Content Strategy With Arena One Concerts?
Arena One and AMC Theatres recently launched “Arena One at AMC,” a nationwide, real-time interactive concert format bringing artists like Bebe Rexha, Paris Hilton, Kim Petras, and Maren Morris to more than 300 U.S. locations, while AMC also reported first-quarter 2026 revenue of US$1.05 billion and a reduced net loss of US$117.1 million. This combination of an immersive live-concert product and year-on-year improvement in quarterly results highlights AMC’s efforts to broaden content...
The perfect commuter bike? Velotric's Discover 3 makes its case.
A customized mid-motor and Shimano's new Cues components are a winning combination.
BrightSpring Health Services (BTSG) Is Up 10.3% After Raising 2026 Revenue Guidance And Q1 Beat – Has The Bull Case Changed?
In early May 2026, BrightSpring Health Services reported first-quarter results showing revenue of US$3.61 billion and net income of US$148.77 million, and also raised its full-year 2026 earnings guidance to expected revenues of US$14.73 billion to US$15.23 billion. The combination of outperformance in specialty pharmacy and infusion services, efficiency gains from automation, and successful home health integrations is reshaping how investors view BrightSpring’s earnings power and growth...
For Yale senior, a love of science and of languages opened up new worlds
Some classmates were confused by Audrey Aslani-Far’s interest in studying both science and Russian as a Yale student. But to her, the combination makes perfect sense: both disciplines help a person to better read the world.
Humid Heat: A Growing Health Risk in a Warming Climate
The combination of extreme heat and humidity is dangerous and becoming more common in our warming climate.
Britain Politics Starmer
FILE - This photo combination shows, from left, Wes Streeting in Liverpool, Sept. 30, 2025, Angela Rayner in Shoreditch, London, June 5, 2025, Andy Burnham in Liverpool, Sept. 29, 2025,
Amazon positions live sports portfolio as leverage to pry open upfront dollars
Amazon touts its combination of commerce targeting data and NBA and NFL inventory as a solution to marketer wariness during the upfronts.
How Investors Are Reacting To Brookfield Business Partners (BBU) Softer Q1 2026 Earnings And Dividend Update
Brookfield Business Corporation recently reported first-quarter 2026 results, with sales of US$6,436 million and net income of US$40 million, and its Board declared a quarterly dividend of US$0.0625 per Class A share payable on June 30, 2026 to shareholders of record on May 29, 2026. The combination of softer quarterly earnings and an ongoing cash dividend highlights how the business is balancing current profitability with continued capital returns to shareholders. Next, we will examine how...
Why Flutter Entertainment (FLUT) Is Down 6.2% After Q1 Earnings, CEO Exit And Major Buyback
In the first quarter of 2026, Flutter Entertainment reported sales of US$4,304 million, lower net income of US$218 million, and confirmed the completion of a US$1,241.88 million share buyback while announcing the departure of FanDuel CEO Amy Howe and expanded leadership roles for Christian Genetski and Dan Taylor. The combination of softer earnings, a leadership reshuffle at FanDuel, and continued capital returns via buybacks gives investors fresh information on how Flutter is balancing U.S...
Big mysteries to be solved in draft lottery
Those balls will create a four-digit combination that will match one previously assigned to the lottery teams, and with that, somebody wins the No. 1 pick in next month’s draft.
ISU trustees approve $84 million for new science complex facilities
With a combination of state funding and repayment from student fees, the ISU Board of Trustees approved $84 million in funds for three new STEM facilities. These include a new teaching building, an annex and a greenhouse.
Google's $9.99-per-month AI health coach launches May 19
The Gemini-powered health coach will act as a combination fitness coach, sleep expert, and health and wellness advisor.
Business groups see mixed results as 2026 legislative session nears end
Officials with two of the state’s largest business organizations say the 2026 legislative session delivered a mixed bag for Connecticut employers, with a combination of policy wins, missed opportunities and measures they say could hinder economic growth.
IDEAYA Biosciences Reports First Quarter 2026 Financial Results and Provides Business Update
Phase 2/3 registrational trial (OptimUM-02) of darovasertib combination met its primary endpoint; complete data will be provided in a late-breaking oral...
State officials, lawmakers press for delay on WakeMed/Atrium deal
After initial media reports detailed the proposed combination of the Raleigh- and Charlotte-based systems, Wake County commissioners may move to slow down decision-making.