SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " hurt " 720 found 🔀 AI-powered Shuffle
Jalen Hurts Repeats Honest Analysis Of Eagles’ Loss vs Rams
Week 4 was another bad showing for the Philadelphia Eagles‘ offense. While they managed to add more points to the board after putting up just seven points in Week 3 against the Chicago Bears, the Eagles slightly improved their performance while shorthanded, putting up 20 points against the Rams. Still, it wasn’t enough. At the […] The post Jalen Hurts Repeats Honest Analysis Of Eagles’ Loss vs Rams appeared first on HEAVY.
Rapper Lucki alleged stabbed in bloody brawl outside ComplexCon
Video appears to show the rapper with a laceration below the jaw. At least four people were hurt in a knife attack, police said.
Patriots’ Christian Gonzalez-Less Secondary Takes Another Hit vs. Bills
The New England Patriots entered Sunday’s matchup with the Buffalo Bills short-handed at cornerback. Their depth was tested even further early in the fourth quarter.Charles Woods left the game after making a tackle on Bills wide receiver Joshua Palmer, according to Ethan Hurwitz of Patriots on SI. Charles Woods is hurt after making a tackle […] The post Patriots’ Christian Gonzalez-Less Secondary Takes Another Hit vs. Bills appeared first on HEAVY.
Center for Healing the Hurt hosting Women's Mental Health Day
Taking care of your mental health is just as important as taking care of your physical health, but for many women, their own well-being can end up at the bottom of the list.
Eagles' Jalen Hurts Seemingly Places Blame on New Offensive System
Hurts has a fair point, but the team needs to be better.
Leaked Anthropic IPO prospectus: The US government could hurt our business
Anthropic (ANTH.PVT) understands that the US government could affect how customers of all kinds view their business.
Anthropic warns government attitudes may hurt customer ties, IPO prospectus shows
Anthropic warned that government attitudes toward the company and its technology could have broader implications for its business, including its relationships with commercial customers and partners, according to the IPO prospectus seen by Reuters.
Affordability is on voters’ minds in Pa. swing districts as the cost of gas and groceries skyrockets
The cost of living is the rise as the war in Iran continues. That could hurt Trump-aligned incumbents in key Pennsylvania swing districts.
Jalen Hurts Illegal Hit Defended by Bears Teammate
The illegal hit on Philadelphia Eagles quarterback Jalen Hurts by D'Marco Jackson has been defended by his teammate Jahdae Walker. The post Jalen Hurts Illegal Hit Defended by Bears Teammate appeared first on HEAVY.
Trump launches near-daily campaign sprint
But questions remain on whether he’ll help or hurt Republicans
Talarico courts rural Texas voters in Senate race against Paxton
The Democratic Senate candidate said Republicans have hurt farmers and small towns as he touted positions on energy, data centers and healthcare.
‘SNL’ Icon Reveals Trump Move Is Killing His Business
The actor and comedian blasted the president for hurting his side hustle.
Deutsche Bank CEO warns Germany’s political shift is troubling foreign investors
Deutsche Bank CEO Christian Sewing warned that recent election results could hurt Germany’s appeal to international investors.
5 Tiny Things You Do Each Day That Make Joint Pain Worse
Your nightly doomscroll might hurt more than just your sleep.
Debt service and the Pentagon. Private equity and the politics of the US housing market. The return of black lung disease & the Franco-Prussian War in color.
Thank you for opening your Chartbook email. RALPH BALSON. 1890—1964. Oil and enamel, signed. Source: Gavekal This going to hurt - the two 7s in the US: diesel and mortgage rates Source: Gavekal In the US housing market, costs are soaring and the role of corporate, private equity-backed buyers is high on the mid-term election agenda. HEY READERS, THANK YOU for opening the Chartbook email. I hope it brightens your day. I enjoy putting out the newsletter, but tbh, what keeps this flow going is the generosity of those readers who clicked the subscription button. If you are persuaded to click, please consider the annual subscription of $60. It is both better value for you and a much better deal for me, as it involves only one credit card charge. Why feed the payments companies if we don’t have to. Subscribe It is striking how, since 2020, big banks have dropped out of the political spotlight in the US. For contributing subscribers only. Subscribe Rates of the lung disease pneumoconiosis among working US coal miners have risen to levels not seen in nearly 40 years Source: Bloomberg Chinese Clean Technology Exports For contributing subscribers only. Subscribe Ralph Balson (1939) Portrait of Grace Crowley Cole, G. O. & Haseman, S. M., (2023) “‘The Substance of Paint’: Class and Materiality in the Work of Ralph Balson”, Open Library of Humanities 9(2). Ralph Balson (1890–1964) was an English plumber and house painter who emigrated to Australia in 1913 and subsequently became a key member of Sydney’s artistic avant-garde. He is credited with having the first solo exhibition of purely abstract painting in Australia in 1941. Despite his role in developing Australian non-objective painting, Balson remained principally a house painter, working on his art practice at weekends. In 1955 he retired on a state pension and became a full-time artist. Balson’s artistic education and methods were critically shaped by his working-class background. He did not travel abroad until 1960 and was an avid auto-didact. His materials, palette, techniques and compositional strategies were likewise informed by his trade. Balson’s profession as a painter-decorator made him conspicuous within the predominantly middle-class Sydney art scene, though his painting partner Grace Crowley considered it an advantage in their pursuit of constructive painting. This paper explores the impact of Balson’s trade on his trajectory towards pure abstraction. While his art was at odds with the predominantly figurative mode of class-conscious art in Australian Modernism, we argue that it is embedded in the experience of class through its creative adaptation of labour into aesthetics. Source: OLH Svetlana Alexievich, The Art of Oral History No. 1 Paris Review Issue 257, Fall 2026 Interviewed by Elena Kostyuchenko INTERVIEWER How were you able to go to Chernobyl? Did you need special papers? ALEXIEVICH It was a time of chaos. They let me right into the zone. … More than anything, there was confusion. Adamovich [Ales Adamovich, the Soviet Belarusian writer], I remember, persuaded Gorbachev to send in the scientists, who showed up without even bringing their shaving kits. They were told that there had been an explosion at a nuclear power plant, but for some reason they thought that they’d be there for only a day or two. The first time I went was several months later, and people kept telling me about things they didn’t understand—how the fishermen couldn’t find worms, because they’d burrowed deep into the earth, how the milk wouldn’t curdle at the cheese factories. The honeybees wouldn’t come out of their hives. The evacuations started, I think, in the first month. The old women hid, they wouldn’t leave. I mentioned radiation to one of them and she said, “I’ve seen that radiation, all right! It’s yellow with green in it. I saw puddles of it in my garden, and I told the other women, and we ran and looked, and she had it in her garden, and the other one, too!” God, it was wild, the way the mind made sense of it. There was a story going around about Gorbachev telling the scientists to show him the radiation. “We can’t, it’s invisible.” “But I want to see it!” I also ran into the soldiers who’d been flown in on helicopters from Afghanistan. I asked them, “What are you doing here with your machine guns?” They said, “We’re collecting the radiation, that’s what.” So you had some of them running around with their guns, others out in the village washing off firewood or burying soil in the soil. These were the kinds of things that exploded our worldview. They made you realize that culture was just a chest filled with old manuscripts. There were no books in there that could help me. Our philosophers turned out to be useless when faced with the unprecedented. Derrida, Baudrillard—philosophy fell silent. What was happening? How would we live with it? That’s when I decided it simply needed to be witnessed. Which is what I did. INTERVIEWER I wanted to ask about how you talk to people. … ALEXIEVICH Yes, we sit and we talk—about what interests me and about life in general. About love, about everything in the world. That way, what comes out is three-dimensional. If you cut straight to the part you need, which is what journalists do, it won’t be interesting, and it won’t be the truth, either. Not the whole truth. INTERVIEWER Do people always open up when you ask questions, or can questions get in the way? ALEXIEVICH You have to ask questions, of course. Your job is to scour away the banality and return people to their true selves, to make them face what they rarely tap into. With every new person, you have to find a new way to do it. When you ask an interesting question or you share what happened to you, you help people really think about what they’re saying and not just repeat whatever they’ve picked up from the newspaper. But not everybody is capable of it, not everyone wants to put themselves through that. Either the chemistry starts to kick in or it doesn’t. A person might be wonderful, but you can tell that the conversation just isn’t going to happen. You can try to push it, but it will be a product of your own intellect, rather than of that mysterious connection. Life doesn’t come from the mind. Some people I can call two years after our last conversation, and they’ll say, “Oh, Svetochka! I think of you all the time,” and we’ll start talking again. With others, that won’t happen. That doesn’t mean they’re not extraordinary people, just that you can’t connect with them. They might have some insight, but you don’t have the right antenna to pick up their signal. Source: The Paris Review Colorized Franco-Prussian war … the ruins of Strasbourg with a French photographer and his mobile dark room. Ralph Balson (1961) Matter Painting If you’ve scrolled this far, you know you want to click: Subscribe
Fewer California Republicans approve of Trump, poll says. That could hurt GOP midterm chances
With gas prices high and an unpopular war dragging on, President Trump’s approval has slipped with California Republicans, a poll shows
When “DEI” research is cut, what happens to community health?
“I’m just going to run to the grocery store!” How many times have we said this without thinking about it? For most of us, it's usually an easy walk or a short drive to get the cheese we forgot. In reality, though, 13% of the U.S. population (about 39 million people) live in “food deserts,” which means living more than a mile from a grocery store in urban areas and more than 10 miles in rural areas. This was the case for people in Pittsburgh’s Hill District, where a quick run to buy food wasn’t an option. In the 1930s, federal maps marked the Hill as "hazardous" for lending, a practice known as redlining that steered investment away from Black neighborhoods. Decades of disinvestment followed, and residents went about 30 years without a nearby grocery store. This made it hard to keep healthy eating habits and contributed to chronic disease. When a grocery store finally opened in the area in 2013, researchers saw the opportunity and launched the PHRESH study, which initially compared the health of participants from the Hill district to those in the Homewood district. Over time, the study expanded to other factors such as brain health and Alzheimer's risk. Residents like Roderick Blair overcame initial hesitation to share their health data, trusting it would benefit their neighborhood. Then, in August 2026, the NIH abruptly canceled the study’s grant, citing that it was “subjective” and fell outside their scientific scope—an effect of the administration’s interpretation of diversity, equity and inclusion (DEI). Research like PHRESH can help determine what changes in a neighborhood actually improve health, so cutting it has left that question unanswered. Other canceled studies have examined health issues like maternal health, preterm birth rates, or sickle cell disease. Courts have reversed some of these grant cancellations, but not all of them. If we really want America to be healthier, research into why some communities get sicker than others is absolutely critical. The law that created the federal minority health research institute passed with bipartisan support in 2000. But these days, as evidenced by grant cancellations, the political shift in attitudes toward DEI means we often lose access to the health information we need to help all communities thrive. DEI vs. health equity vs. equality and the overlap (or lack thereof) The letters “DEI” evoke very different reactions depending on who you are in the U.S. DEI programs can address gender, disability, age, and other factors, but the fiercest debate centers on race. For some people, hearing DEI brings to mind policies that may have cost them a job or a college seat because they are white. Others see DEI as a matter of justice: a way to expand representation and opportunity for groups that have been historically marginalized. Both perspectives are rooted in lived experience, and both center on the same question: whether hiring and admissions practices are fair. Hiring and admission practices, though related, are not the same as health equity. Health equity is “the attainment of the highest level of health for all people.” It’s the recognition that some groups of people consistently experience worse health outcomes than others. For instance, black mothers die from pregnancy-related complications at three times the rate of white mothers, and rural Americans are more likely to die from issues such as heart disease and cancer. Equity is also often conflated with “equality,” which leads to misunderstanding of how to actually best support communities. Equality ignores the fact that we aren’t all starting life with the same resources or circumstances, whereas equity is about helping people get what they specifically need based on their situation so they have the chance to achieve the same outcome as anyone else. For example, if every household in Pittsburgh got a $30 grocery gift card, that would be equal. But during the decades the Hill District went without a grocery store, that card wouldn’t have helped much. Equity means making sure everyone can actually access a store in the first place. DEI policies can overlap with health equity in many ways. For example, they may help expand access to quality education and stable, well-paying jobs, which in turn can provide health insurance, safer housing, and improved finances—all of which can reduce health disparities. But to make that happen, we first need data to identify disparities in communities and to develop solutions that effectively address them. What we lose when the research stops Community data is important to health equity because: You can’t fix what you don’t see: Data show which communities are most affected by health factors such as infection, heart disease, and cancer. If we don’t know what is happening and where, then we can’t develop interventions to help. Poor health costs everyone: Chronic disease is expensive—both to the individual person and to the overall economy. Understanding what groups of people are most at risk allows us to develop interventions that can save everyone money. Disparities exist for many communities: Health equity includes disparities that exist due to a whole host of factors, such as family background, race and ethnicity, rural vs. suburban residence, gender and sexual orientation, veteran status, disability, and lower income. This means many Americans can benefit from research into differences in health outcomes and how to improve them. Trust is easy to lose: Some participants in the PHRESH study were initially vocal about their concerns about participating. But that trust was earned because the researchers kept their promises and centered their work on the community. When projects are canceled mid-cycle, researchers have no choice but to leave behind communities they had promised to help. This hurts trust in the long run. It’s also a very inefficient use of resources, and it will take significant time and effort to redo the work when the government realizes this work is important again. How should we talk about health equity? This is hard because the words “equity” and “DEI” are currently very politically charged. So whether you’re a public health professional, teacher, or friend, how we talk about this topic matters. The right framing can help people who might otherwise be skeptical see why health equity research is important and deserves funding. Here are some suggestions to help your conversations: Choose your words strategically: Who are you trying to reach with your message? Are they likely to be resistant to terms like “diversity” and “equity”? If so, find alternative words to use to still get the message across. It is frustrating to be in that position, but the goal of improving health is too important not to try to make inroads. Sometimes simply reframing can help the message reach those who need to hear it. Focus on the problem: The terms “health equity” and “DEI” are abstract. Make it more specific. For example, discuss differences in maternal death or ways to improve health outcomes in rural communities. These still have equity at their core but will likely be better understood by those you’re talking with. Focus on systems: Disparities exist, but if they are communicated poorly, people can mistakenly think the issue is the individual’s fault. Disparities are largely driven by failures of the system—such as lack of access to health care and a long legacy of racism. When discussing the disparities, frame them around these systemic issues to ensure blame isn’t placed on the individuals impacted. Tell stories: Personalize these policies by using stories from those impacted that connect to the data you’re trying to convey. This helps make the policies and outcomes more concrete and meaningful. Bottom line Some communities end up sicker than others. That’s just the facts. We can argue about the best way to do that research, but canceling it simply because it may be linked to DEI doesn’t make anyone healthier. It just leaves communities like the Hill district behind. And in the end, it causes us all to move backward in our efforts to improve health in this country. Love, EM Big thanks to MacKenzie Isaac & Legairre Radden, who reviewed this piece and generously shared their expertise and lived experience to help improve it. Dr. Liz Marnik, PhD, is Executive Director of The Evidence Collective and a science communicator and immunologist working at the intersection of public trust, science, and public health. To discuss communication training on topics like health equity and storytelling, email Liz at liz@yle.health or learn more on our website. Your Local Epidemiologist (YLE) comprises a team of experts, ranging from physicians to immunologists to epidemiologists to nutritionists, working together with one goal: to “translate” ever-evolving public health science so that people are well-equipped to make evidence-based decisions. The YLE suite of newsletters reaches over 475,000 people across more than 132 countries. This newsletter is free to everyone, thanks to the generous support of fellow YLE community members. To support the effort, subscribe or upgrade below: Your Local Epidemiologist is a reader-supported publication. To receive new posts and support my work, consider becoming a free or paid subscriber. Subscribe
Ken Paxton, G.O.P. Nominee in Texas, Privately Said Trump’s Convention Hurt Him
Ken Paxton, one of the party’s top Senate candidates and a Trump loyalist, said that “everybody’s numbers dropped” after the event, according to audio obtained by The Times.
Knicks Stars ‘Heartbroken’ and ‘Hurt’ by Offseason News
Less than a month after winning the NBA Finals, the New York Knicks learned that Mitchell Robinson would be departing for the Boston Celtics. The post Knicks Stars ‘Heartbroken’ and ‘Hurt’ by Offseason News appeared first on HEAVY.
Voice of America Cuts Hurt ‘U.S. National Interests,’ Internal Watchdog Says
The assessment by the State Department’s inspector general echoes concerns raised by critics of the move to shutter V.O.A., including some Republicans in Congress.
Riders see improvements, businesses struggle as Maryland Parkway construction stretches on
While some RTC riders say service has improved, local business owners say the ongoing construction is still hurting their bottom line.
Upfront: A Great N.C. Adventure
Last month, I had a great N.C. adventure. It began with yours truly taking the UUNC Chapel Hill School of Government’s Basic Economic Development ccourse. I’m on the North Carolina Economic Development Board and figured that a refresh on a lot of the things covered here at BNC wouldn’t hurt. I figured the course would […]
Even light drinking may harm brain health, new research suggests
New research finds even four drinks a week may shrink brain volume and hurt language skills, challenging beliefs about light drinking.
JioStar Executive Asks India To Restore TV Ratings Before Festive Season
JioStar's Kevin Vaz asked India's government to bring back suspended BARC TV ratings, saying the gap is hurting festive-season ad planning.
Primetime Review: That’s Entertainment?
If you decide to see Lance Oppenheim’s Primetime, it’s important to remember the title as you watch. Yes, this is a biopic of sorts about Chris Hansen and his work on To Catch a Predator, but it is more accurately about the quest for fame and using people’s trauma to attract ratings. True crime entertainment continues to have a prominent place in many people’s television habits, and this film asks us to examine what that means both for those whose stories have become our viewing pleasure and those of us watching. Primetime starts as Chris Hansen (Robert Pattinson) is told that his show, To Catch a Predator, is moving to a 9 PM spot opposite LOST. Chris and his producer, Andie (Merritt Wever), see this as an opportunity to make the program even more sensational, looking for bigger, more horrific predators. As part of their plan, they hire a young actor, Dan Plum (Skyler Gisondo), to play “Decoy Dan,” the person who greets the would-be predators who were catfished by Xavier Von Erck (Matthew Maher). Oppenheim, along with writers Ajon Singh and Luke Dittrich, is less concerned with an accurate retelling of the show as much as they are interested in interrogating the why of it all. That decision sometimes leaves Primetime feeling less like a biopic and more like a satirical look at the nature of programming like this. Visually, the movie is impressive. Oppenheim uses light and color effectively to cast Hansen as both villain and savior. Pattinson plays Hansen in an almost comical manner, as we see him wake his two young sons to watch a clip of the show, just to brag that he was moving into a prime spot on television. Even Andie struggles to accept a “nice” job when there is so much more fame to be found producing salacious true-crime content. Wever does an excellent job showing how the hunger for fame is not just in front of the camera, but in every aspect of the production. The heart of the movie, and the standout performance, belongs to Gisondo as Dan Plum. He is someone who just wants to get enough hours to be admitted into the Screen Actors Guild, and stumbles into this job without really knowing what it is. Throughout the film, we watch him suffer one trauma after another, ending with him witnessing the suicide of a District Attorney who is about to become the next unwitting star of Hansen’s show. If there is a sympathetic character in Primetime, it is Decoy Dan, and Gisondo plays him brilliantly. If you’re a fan of programming like To Catch a Predator, then Primetime will probably make you feel uncomfortable, and I think it’s worth sitting with that feeling and examining why we turn on shows that display the worst of humanity while we judge from our couches. Yes, it is correct to want to see people who would hurt children brought to justice, but perhaps it shouldn’t be something that we watch as entertainment. Rating: 3.5/5 This review originally appeared in The Dominion Post on September 25, 2026. MacGuffin or Meaning: Film & TV Reviews and Reflections is a reader-supported publication. To receive new posts and support my work, consider becoming a free or paid subscriber. Subscribe
Draymond Green Says Luka Doncic & Lakers Hurt LeBron James
The Los Angeles Lakers are still forced to witness the loss of LeBron James remaining a huge talking point. Any NBA team losing an iconic figure will see this level of attention, and it is far bigger than the Lakers. Draymond Green decided to bring this back into the news by addressing something head coach […] The post Draymond Green Says Luka Doncic & Lakers Hurt LeBron James appeared first on HEAVY.
Eagles' Jalen Hurts fuming over medical delay in Bears loss
Philadelphia Eagles quarterback Jalen Hurts wasn't happy about being out of the Chicago Bears game for a period of time.
Andy Dalton's first pass of 2026 season was an interception
Former Bengals quarterback Andy Dalton entered the Eagles-Bears Monday Night Football game in relief of Jalen Hurts, and threw a pick in the end zone.
Jalen Hurts forced to undergo concussion evaluation
The Eagles quarterback had to leave Monday night’s game after taking a late hit in the second quarter.
As Methodist Healthcare seeks new trauma center, city leaders want to protect BAMC military mission
While leaders at Methodist Healthcare pitch a Level II trauma center, city officials say it could hurt the mission at Brooke Army Medical Center.
Rochester’s explosive growth leaves some businesses behind
A public-private partnership that guides Mayo Clinic’s expansion approved half a million dollars amid ongoing construction that business owners say is hurting customer access and their bottom lines.
Bay Area sports calendar, Sept. 28-29
Jalen Hurts and the Eagles will visit the Bears at 5:15 p.m. Monday. (KGO 7, KXTV 10, ESPN)
How Orioles’ Postponement News Hurts Pete Alonso
The Baltimore Orioles were supposed to finish their 2026 MLB season on Sunday in Yankee Stadium. Turns out, they won’t get the chance to do that. And Pete Alonso won’t get the chance to ensure himself a special first season in Baltimore. The news came about 4 p.m. ET on Sunday that the Yankees-Orioles game […] The post How Orioles’ Postponement News Hurts Pete Alonso appeared first on HEAVY.
Bellamy 'hurting' as Denmark outclass Wales
Craig Bellamy says he is "hurting" on the back of Wales' 2-0 Nations League A defeat away to Denmark, but feels his side will continue to improve.
Can Omarion Hampton Move Past His Fumbling Woes?
Omarion Hampton has already lost two fumbles through the Chargers’ first two games. With turnovers hurting the team early this season, Hampton needs to fix his ball-security issues quickly and prove he can be trusted with a heavy workload.
Intel Panther Lake Teardown, 18A, BSPD, GAAFET, SemiAnalysis STEEL
Panther Lake debuts the first commercial implementation of backside power delivery (BSPDN), introduces Intel’s first iteration of gate-all-around (GAA) transistors, and showcases their advanced packaging capabilities with its Foveros-S assembly. With Panther Lake, Intel’s manufacturing arc has shifted from nebulous roadmaps to shipped silicon, a significant milestone on their long road back to competitive semiconductor manufacturing. To evaluate the extent of Intel’s comeback, we tore down Panther Lake. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Our teardown traces 18A from its four-sheet RibbonFETs (Intel’s marketing name for GAAFETs) and gate stacks through contacts, frontside and backside wiring, and the bonded carrier. We explain how these material and integration choices improve gate control and reduce resistance, while adding capacitance, thermal resistance, and process complexity. Our measurements put Panther Lake’s 18A compute logic and TSMC N3E GPU logic at similar logic density. However, 18A does not lead TSMC N3P, N2 or Samsung SF2 in peak density. Panther Lake’s CPU cores are incremental updates, and the high-end GPU still uses TSMC N3E. Panther Lake assembles one compute tile, one GPU tile, and one I/O tile atop a passive base tile using Intel’s Foveros-S advanced packaging. Both compute tile variants use Intel 18A. The Xe3 GPU options are a 4-core GT1 tile on Intel 3 and a larger 12-core GT2 tile on TSMC N3E. Both I/O tile variants use TSMC N6. [1], [2] Our analysis centers on the PTL-U compute tile, both the 4-core and 12-core GPU tiles, as well as the 12-lane I/O tile. In conventional chips, power and signal are routed through the same frontside metal stack towards the device frontend. Power rails consume scarce routing resources near the transistors, while tall via stacks carry VDD and VSS from the coarse upper wires to local rails. Backside power delivery (BSPD) moves the main power network behind the transistor layer, to the backside, separating it from frontside signal routing. We covered BSPD and its impacts in 2024. [3], [4], [5] Intel’s BSPD implementation, branded as “PowerVia”, routes power through dedicated backside metals to nano-TSVs, which connect those rails to local source/drain (S/D) contacts. Implementing that separation requires Intel to build the interconnect stacks from both sides of the wafer. The frontside comprises the M0-M14 signal stack, while the backside comprises the BM0-BM5 power stack. M0 and BM0 are closest to the transistors. The nano-TSVs connect the two sides, but Intel patterns and etches each via from the front after forming the contacts. A narrow via runs from the side of the contact deep into the silicon substrate. Intel then completes the frontside signal metal stack, bonds the wafer to a carrier, flips it and removes the original substrate until the buried via tips are exposed. The backside metal stack is then deposited directly on the revealed vias. The nano-TSV and backside-via profiles taper in opposite directions because Intel forms them from opposite sides of the wafer. The transistor structures form the FEOL. Local contacts and nano-TSVs connect them to the wiring. M0 begins the frontside interconnect stack. The silicon carrier remains attached above the frontside interconnects. It supports the device wafer during substrate removal and backside processing and remains part of the finished chip’s thermal path. PowerVia removes the main power distribution from the congested frontside metals, routing supply through shorter and wider backside wires. Its lateral landing still occupies area in the standard cell, so it recovers less cell area than a direct backside contact. [3] Nano-TSVs beside the logic devices carry VDD or VSS from the backside power network, while signal connections continue upward through the frontside metals. Backside Interconnects Samsung SF2 data is included for comparison to Panther Lake’s within this article. SF2 is the incumbent GAA foundry node but lacks BSPD, serving as a useful reference to evaluate 18A. A full teardown of Samsung’s S26 products, processed on SF2, will be shared soon.Nanosheet-cut EDS comparison. The PowerVia supply path runs from the backside Cu rails through Mo-lined W nano-TSVs to the local transistor contacts. In this cross section, the tapered connection spans roughly 150 nm from the contact level to BM0. The Ta liner confines Cu and promotes adhesion to the surrounding stack; the AlOₓ etch stop controls the next dielectric etch above the rail. Dielectric beneath the ribbons electrically separates the devices from the backside wiring and removes the conducting silicon body below the channel. [6] AlOₓ serves as an etchstop (ES), enabling endpointing and protecting the underlying layers. Low-volatility aluminum fluoride reaction products resist the fluorinated plasma, allowing a thin AlOₓ film to protect the metal while the surrounding low-k dielectric is removed. [6], [7]. While the BM0 and layers above the M1 lines show double AlOx layers, Our SMIC N+3 teardown showed single AlOₓ layers. SMIC uses a simpler local AlOₓ substack, while the remaining cap and etch sequence provide the required landing protection. So why double layers? The closely spaced AlOₓ doublets provide two protected endpoints in the etch sequence. Intel documents an AlOₓ/SiN/AlOₓ stack that explains the benefit. The main dielectric plasma etch stops on the first AlOₓ film; a selective wet clear opens that film; a second plasma etch removes the intermediate SiN and stops on the second AlOₓ film. The final wet clear exposes the metal landing surface. SiN is the intermediate dielectric in Intel’s published example. [8] The second stop protects the metal through a cap breakthrough. Wide openings can etch faster than narrow ones, and etch depth varies across the wafer. Metal under an early-clearing opening would otherwise be exposed while other openings still need more etching. Staged protection widens the process window and reduces metal erosion, corrosion and void formation. [8] TSMC documents AlN/AlOₓ/SiOC/AlOₓ above Cu, with AlN blocking Cu diffusion, and a simpler AlN/SiOC/AlOₓ variant that omits one AlOx film. [9] Levels with different opening sizes, aspect ratios, pattern densities and cap materials need different etch margins. A double AlOx stop is useful where another protected endpoint justifies the added processing. The extra film adds formation, selective opening and cleaning steps, plus another set of interfaces to control adhesion, moisture, and stress. These blanket films are opened through the existing via pattern, so each film does not require another lithography mask. AlOₓ adds parasitic capacitance when it replaces lower-k dielectric; two thin AlOₓ films can nevertheless contain less AlOₓ than one thick film. Total thickness, placement, and theintermediate dielectric determine the electrical cost. Deposition chemistry also changes AlOx permittivity and residual hydroxyl content, which can oxidize the underlying metal. [7], [8], [10], [11] The backside stack separates into relatively fine BM0-BM2 wiring near the devices and coarser BM3-BM5 power distribution. The largest pitch increase occurs between BM2 and BM3. BM0’s pitch closely matches the logic-row height, fitting local power delivery to the cell rows. Higher levels aggregate current through larger conductors: routing density becomes less important than low resistance and current capacity as the network approaches the package. This hierarchy provides wide power wiring for the power delivery network without consuming scarce frontside signal-routing resources. [3] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Frontside Interconnects Intel 18A combines Mo-lined W contacts and nano-TSVs with a separate backside Cu power network. Samsung SF2 keeps power on the frontside, using Ti-based contact interfaces and Ta-based barriers and Co liners around Cu wiring. In 18A standard-cell rows, backside power rails supply the devices through nano-TSVs within the cells, freeing frontside routing resources. Samsung’s M0 accommodates both power and signal connections. From the device toward M0, the connection runs through a Ti-based S/D interface, W contact fill, a Mo-lined W via, and the Cu M0 wire. Mo supplies a conductive nucleation and adhesion layer for W, replacing the resistive TiN liner used in conventional W integration. This increases the effective conduction volume within the feature while retaining W fill and its established polishing, cleaning and etching processes. Intel’s Mo/W patent describes this integration tradeoff. The nano-TSV uses the same Mo-lined W construction in the backside supply path. [12] The move from TiN to Mo is an incremental change. While a full Co or Mo fill can also reduce the volume lost to liners in very small features, it requires new integration schemes that increase complexity and risk. Cu remains attractive for wider wires due to its low resistance. As wires and vias shrink, the diffusion barrier consumes an increasing fraction of their cross-section. [12], [12], [14] Intel uses Co/Ru liners at M0-M1, Co at M2-M4, and Nb at M5-M9. The lower-level liners help Cu adhere and reduce void formation during trench fills. Applied Materials’ Endura has new thermal control that facilitate wetting process, so the thin film continuity is good enough that good capillary pressure will drive Cu atoms to the via bottom without voiding. Intel’s choice to use Nb is particularly interesting. Intel’s Nb patent describes a conductive diffusion barrier intended to reduce the barrier’s contribution to resistance relative to conventional Ta-based barriers, particularly at via bottoms where all current crosses the barrier. The patent pairs Nb in coarser levels with the option of lower-cost PVD processing. [15], [16] The upper metal layers support thicker barriers formed through physical vapor deposition (PVD) despite its worse coverage and uniformity. Meanwhile, the lower metal layers require thinner barriers deposited through conformal atomic layer deposition (ALD). Co/Ru adds another material interface and requires controlled deposition and Cu fill. Changing liners and barriers by metal layer allows Intel to optimize interconnect resistance, process complexity, and reliability. [15, 16] RibbonFET, Intel’s name for its gate-all-around FETs (GAAFETs), replaces the FinFET’s vertical fins with four stacked horizontal silicon nanosheets, allowing the gate to surround the channel on every side. The path to GAAFET begins with the planar transistor. A planar MOSFET places the gate above the channel between its source and drain. Pairing an NMOS with a PMOS transistor creates a CMOS inverter, in which the NMOS pulls the output low for a high input, and the PMOS pulls it high for a low input. The gate must retain electrostatic control of the channel to ensure clean switching. As gate lengths shrank, the drain began to compete with the gate for that control, increasing off-state leakage. Electrostatic control was restored through an architectural evolution that raised the channel into a vertical fin and wrapping the gate around three sides. Called “FinFET”, this new architecture packed more effective channel width into a smaller footprint. Further scaling made it harder to maintain both drive current and leakage within smaller cells, and reintroduced the same problems planar MOSFETs faced. Nanosheet GAAFETs close the fourth side by replacing the vertical fin with a stack of horizontal nanosheets, each surrounded by the gate. The tighter electrostatic control suppresses leakage at shorter gate lengths while stacking adds effective channel width within the cell footprint. In a FinFET process, channel width changes in discrete steps as designers must add or remove whole fins. Nanosheet width can instead be adjusted continuously within the process’s design rules. Wider sheets increase drive current, while narrower sheets reduce capacitance at the cost of drive current. Intel 18A uses stacks of four nanosheets each and varies their widths across logic and SRAM. At the process level, adding more sheets to each stack increases effective channel width and drive current, but complicates fabrication. RibbonFET vs MBCFET Samsung began GAAFET production in 2022 with SF3E, following with SF3 and now SF2. Its ‘MBCFET’ provides a useful structural comparison with Intel’s first RibbonFET implementation. [17] STEEL is digging deeper into SF2, used in the Exynos 2600, and TSMC’s GAAFET N2, used in Apple’s A20 Pro, in upcoming newsletter articles. We’re throwing some teasers on X. Let’s compare Samsung SF2’s MBCFET with Intel 18A’s RibbonFET. Subscribe Even to the untrained eye, Intel’s extra nanosheet is obvious. Intel stacks four ribbons to Samsung’s three. Samsung’s sheets are much wider in these fields, so both sheet count and width matter to the available channel perimeter. Sheet width also changes which silicon surfaces carry current. On conventional (001) silicon, wide nanosheets emphasize the broad top and bottom surfaces, favoring electron transport; the larger sidewall contribution in a narrow sheet favors hole transport. Thinner sheets improve gate control but increase confinement and scattering. This makes width and thickness part of the NMOS/PMOS balance, alongside strain and threshold voltage. [18], [19] GAAFET designs like 18A use different work-function-metal (WFM) stacks for NMOS and PMOS. Around each ribbon, a thin SiOx interfacial layer separates the silicon channel from the HfOx high-k dielectric, with La providing dipole tuning and the WFM wrapping the dielectric. NMOS uses a TiAl-based stack, while PMOS uses TiN WFM. W fills the remaining gate trench, providing a lower-resistivity path where the work-function layers are no longer needed. In this field, the PMOS stacks leave room for W between ribbons, while the NMOS stacks occupy more of those gaps. A silicon-based dielectric marks the P/N boundary, allowing the PMOS and NMOS gates, sharing the same gate trench, to be processed sequentially. Fast logic paths, retention circuits, and SRAM need a family of threshold options. Changing threshold without substantially changing device dimensions, capacitance or fabrication complexity is valuable. FinFET processes typically use different work-function-metal stacks. In a four-ribbon GAA stack, the narrow sheet-to-sheet gap limits how much WFM can fit around each channel. La in the gate dielectric creates interfacial dipoles at the SiOx/HfOx boundary, shifting effective work function and tuning threshold voltage. This gives Intel another control alongside its NMOS and PMOS WFM stacks. Low-threshold devices improve critical-path drive; higher thresholds reduce leakage elsewhere. Dipole tuning is especially useful in GAA because it changes threshold without consuming the narrow intersheet gap with thicker WFM. Precise control of La incorporation, diffusion and interface quality has long been a challenge, limiting viability in high volume production but is now seen from every leading-edge foundry. Intel’s patent describes depositing a dipole-forming oxide above HfOx and annealing it toward the interfacial oxide before completing the work-function and fill metals. This separates threshold tuning from the space available for metal. Newer research addresses the thermal cost: imec’s 2026 dipole-middle research inserts the shifter between two HfOx depositions, shortening the diffusion path while protecting SiOx during patterning. [20], [21]Matched-cut EDS, Intel 18A (left) vs. Samsung SF2 (right). Intel retains raised source/drain epi beneath its contacts, while Samsung recesses W deep into the epi to form a V-shaped Ti-lined interface. The deeper contact increases metal-to-semiconductor area and shortens the current path from the lower sheets, reducing contact and spreading resistance. It also removes epi volume and brings the contact etch closer to the channel ends. Retaining more epi preserves the material available for strain transfer, especially from SiGe into PMOS. These geometries balance contact access against stress engineering and etch margin. [22], [23] Samsung stacks three sheets to Intel’s four ribbons, and both processes use sheet width to tune drive strength. In our Samsung cross-sections, widths range roughly from 19 to 30 nm in the NPU rows and 37 to 50 nm in the CU cell. The Samsung nanosheets taper, with the widest sheet at the bottom and the narrowest at the top. Both processes use HfOx gate dielectric and Ti-based work-function stacks, with Al in the NMOS stack. In the Samsung devices shown here, the dielectric and WFM occupy the intersheet gaps, leaving W above the top sheet. Intel’s PMOS stack leaves more room between ribbons, and W fills those gaps while the thicker NMOS stack leaves W mainly in the upper trench. Gate-stack EDS maps. The W between Intel’s PMOS ribbons provides a conductive path close to the lower gates. Where WFM fills the entire gap, the gate still surrounds the channel, but voltage reaches it through the more resistive work-function films. Thinner WFM and dipole tuning preserve room for low-resistivity fill; Mo and Ru are alternative fill metals being developed for further scaling. [24] A masked, sequential WFM flow explains the different gate heights and inter-nanosheet fill. The proposed sequence below shows how separate NMOS and PMOS work-function steps produce that geometry. Enabled by the BSPDN process, Intel replaces the dense-logic silicon subfin with dielectric, removing the parasitic conduction path below the ribbons and reducing substrate-related capacitance. A retained silicon body as in classical, non-SOI, planar and FinFET designs needs junction and punchthrough-stop engineering to suppress leakage. Dielectric isolation makes that leakage less sensitive to the subfin doping profile but adds removal and fill steps. It also weakens the direct thermal path through silicon, making the contacts, metal stacks and package more important for heat extraction. [24], [26] Fluorine is concentrated around selected Intel device structures in the maps. WF6 is a standard precursor for W nucleation and fill, while barrier films protect adjacent dielectrics from fluorine attack. Low-fluorine W processes reduce the residual-F burden. Chloride-based precursors avoid introducing F during W deposition, but require control of chlorine attack, nucleation and fill quality. The integration target is a continuous, low-resistance W path with a thin protective liner and minimal chemical damage to the surrounding stack. [20], [27], [28] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. We measured cell height, gate pitch, metal geometry, and ribbon dimensions at the XTEM sites shown below. The tables group these dimensions by site and device polarity. Our “sheet cuts” cross the silicon channel and show the ribbons end-on. “gate cuts” run along the channel through successive gates. The 18A logic cell dimensions point to a five-track logic library while the N3E and Intel 3 cell dimensions evidence a seven-track logic library. The DDR-PHY uses wider M0 wires and much larger spacing than core logic. That trades routing density for lower wire resistance and weaker coupling between neighboring nets. The geometry suits the current delivery and coupling requirements of analog, clock, and I/O circuitry. PowerVia lets 18A combine a compact cell height with wider M0 geometry by moving the main power rails off the signal-routing tracks. That relaxes local wire scaling while preserving a small cell footprint. Cell height and gate pitch set the geometric density; pin access and routability determine how much of it a real block can use. [29] The biggest takeaway from our gate-pitch measurements is that Intel 18A compute logic and TSMC N3E GPU logic have similar density in the Bohr representative-cell model. The 18A example is 18.6% denser than the Intel 3 GPU example. Gate pitches are nearly identical across the three sites, so cell height drives most of the difference. The Bohr model combines a four-transistor NAND2 spanning three gate pitches and a 32-transistor scan flip-flop (SFF) spanning nineteen pitches, weighting their densities 60:40. The sensitivity column shows how independently changing cell height and gate pitch by ±1 nm changes the result. This compares representative cell geometries; whole-die density also depends on cell mix and placement. The 18A P-core gives M0 substantially more metal cross section than the N3E vector engine. Treating each profile as a trapezoid gives 2.63 times the area per line and 1.84 times the area after normalization by routing pitch. The larger section reduces the geometric contribution to line resistance and lowers current density for a given current. Taller and wider wires also add capacitance, so circuit delay depends on the balance of resistance and capacitance. The DDR-PHY has less metal area per routing width than the 18A core fields, while remaining above N3E. [30] Area = height × (top CD + bottom CD) / 2, including liners. Area/pitch normalizes by routing width. Taper is the symmetric sidewall angle from vertical, with the largest angle belonging to the DDR-PHY. Compute tile The measurements show how ribbon dimensions and gate-stack geometry vary across the compute tile and between NMOS and PMOS to balance channel drive, gate load and the space needed for the dielectric/WFM stack across logic, SRAM and the DDR-PHY. Width mainly changes available channel perimeter; thickness also changes electrostatic control and carrier confinement. Gate-stack thickness then determines the space left for low-resistivity fill P-core and LP E-core logic Both the P-core and LP E-core use multiple nanosheet widths. Widths are measured on high-magnification XTEMs while wider-field images demonstrate additional width choices within the LP E-core. Multiple widths are expected even within an LP E-core. Timing-critical paths, buffers and cells with different fanout need different drive strengths. The lower-magnification fields show this width diversity beyond the sites quantified in the table. L2 and L3 SRAM GAA gives SRAM designers another way to balance the pull-up (PU), pass-gate (PG), and pull-down (PD) transistors. FinFET bitcells set device strength through fin count while GAA adds nanosheet width as a sizing knob. In a 6T SRAM cell, a strong pull-down relative to the pass-gate limits read disturbance, while a strong pass-gate relative to the pull-up improves writability. During a write, the pass-gate and write driver pull the node storing “1” below the inverter trip point. During a read, the pull-down holds the node storing “0” low. Bias, threshold voltage, mismatch and assist circuitry set the remaining margin. FinFET high-current cells commonly use a PU:PG:PD fin-count pattern of 1:2:2, a device-sizing ratio rather than a current ratio. Ribbon width lets Intel balance SRAM strengths without adding whole fins. The L2 cell uses its narrowest ribbons for PU and widest for PD, improving writability and read stability respectively. Intel’s disclosed HCC operates without assist; its denser HDC uses negative-bitline write assist. Pulling the selected bitline briefly below ground increases pass-gate overdrive so it can overpower the pull-up at lower supply voltage. That buys density and low voltage writability at the cost of boosting circuitry, switching energy, and additional voltage stress that must be controlled. [31], [32] Four rectangular ribbons give the perimeter = 8 × (width + thickness), before corner rounding. PG/PU is 1.49 and PD/PG is 1.16. The L3 structures closely resemble L2 in layout and cell height. Fewer L3 nanosheet widths are tabulated because fewer high-magnification images were available. DDR PHY The DDR-PHY trades density for controlled analog behavior and reliable off-chip signaling. It contains drivers, receivers, delay circuits, and calibration logic that set drive strength, sampling time, and voltage margin. Repeated four-sheet devices with similar widths fit the use of regular transistor units for matching and programmable drive. Its wider local wiring provides room for current delivery and separation of sensitive signals, while consuming more area than a dense core-logic grid. The layout serves the memory channel’s electrical requirements as well as digital logic density. [33] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Intel 3 GPU devices Vector engine logic Intel 3’s XVE logic uses two-fin PMOS and NMOS devices with power rails in M0. Its cell height and M0 pitch give a seven-track geometry, two tracks more than the 18A logic. One-fin groups also appear among the two-fin devices. Intel 3 L2 SRAM The Intel 3 L2 SRAM uses the familiar HCC sizing pattern: one PU fin, two PG fins, and two PD fins. N3E GPU devices Vector engine logic The N3E XVE field contains repeated two-fin devices with seven-track cell geometry. N3E remains a FinFET process, giving Panther Lake a direct FinFET-to-RibbonFET comparison. N3E L2 SRAM The N3E L2 SRAM uses the same PU:PG:PD fin-count pattern of 1:2:2. Panther Lake-U follows Lunar Lake’s floorplan quite closely. Both pair 4 P-cores with 4 LP E-cores and NPU, media and display engines in similar locations. Lunar Lake also uses Xe2, the direct predecessor to Panther Lake’s Xe3 GPU. This makes Lunar Lake the most direct basis for our comparisons. Arrow Lake differs in core count and uses the older Xe-LPG GPU architecture, so we only use it where it offers a more direct component-level comparison. Compute tile Panther Lake compute-tile floorplans remain sparse even months after launch. Intel 18A’s backside metal and dielectric stack must be removed without damaging the underlying structures before a clean transistor-level floorplan can be imaged. Most published die shots hide or heavily process the background, but we are quite proud of the die shot we achieved and are excited to show the work we have done. We measured the areas of the key components on the compute tile and compared them with their Lunar Lake predecessors on TSMC N3B. These help us to capture changes in block area and compare the two chips across process nodes and designs. Our total tile areas exclude the scribe-line area. The compute-plus-GPU subtotal below uses the PTL-U compute tile and GT1 GPU; it excludes the I/O tile and passive base. Individual block areas use the boundaries marked on the floorplans The compute-plus-GPU row is recomputed from the displayed PTL-U and GT1 areas. Component rows use their stated per-region counts and are not an additive partition of the whole tile. The P-core area remains almost unchanged between Lunar Lake and Panther Lake, despite L2 capacity increasing from 2.5 MiB to 3 MiB. Arrow Lake uses the same Lion Cove core as Lunar Lake but also has a 3 MiB L2. Cougar Cove fits 20% more L2 into the same P-core area. The larger private cache keeps more of each core’s working set close to its execution units, reducing access to shared L3 and DRAM. Extra capacity adds storage leakage and lookup energy, so designers balance it against avoided lower-level accesses. The shared P-core L3 cache also shrank by 14.8%. [2] Cougar Cove combines a similar footprint with Intel’s reported power-efficiency improvements. RibbonFET’s tighter channel control reduces leakage, while PowerVia reduces supply droop and allows tighter voltage guardbands. [1] Darkmont’s four-core LP E-core cluster is 5.0% smaller than Skymont’s on Lunar Lake, with most of the reduction in its L2 regions. The 1 MiB region shrank by 8.4% and the 1.5 MiB region by 14.9%. The tag arrays also use one fewer visible row. Tags identify which memory addresses the data array holds, so rearranging them changes the cache’s layout and wiring without requiring less data capacity. [2] The LP E-cores share one L2. This pools capacity and avoids duplicating all the cache machinery, but the four cores contend for its banks and bandwidth. Their separate cluster also keeps light work away from the performance cluster and its L3, allowing that larger domain to sleep. [1], [2] Cache area includes more than the storage cells. Tags identify each line, decoders select rows, sense amplifiers read the small bitline signal, and wires connect to the banks. Splitting an array into smaller sections shortens wordlines and bitlines, improving access speed, but duplicates peripheral circuits. Panther Lake’s smaller cache regions therefore reflect the complete memory implementation, including how much of each region is devoted to storage. [34] Unlike Meteor Lake and Arrow Lake, Panther Lake has no separate SoC tile. The NPU, LP E-cores, memory controllers, PHYs, media and display engines now share the compute tile. This removes an active die and keeps CPU memory traffic on one die. The cost is moving PHY and I/O-related circuitry onto 18A: drivers, receivers and analog circuits must still meet external voltage, loading and signal-integrity requirements, so their area does not shrink like dense digital logic. [1], [2] The biggest shrink comes from the NPU, which occupies 36.9% less area. NPU 5 consolidates the same total INT8 MAC count into half as many neural compute engines. Each of the three NCEs has a larger MAC array to make the complete NCE envelope 22.6% larger than an NPU 4 engine. Consolidation also halves the number of scratchpads and SHAVE DSPs, from 12 to 6. The MAC array handles matrix multiplication and convolution, while SHAVE executes vector and custom operations that fit the array poorly. [1], [2], [35] The paired floorplans identify each NCE envelope and its scratchpad, MAC, and SHAVE regions. Each measured MAC polygon is counted once per NCE in the area accounting below. The scratchpads store weights, activations, and intermediate results near the MAC arrays, allowing repeated use without fetching them again from DRAM. Halving their number delivers the largest measured area saving but leaves less local storage for the same total MAC count. Layers that no longer fit locally require smaller working tiles or more transfers of intermediate data. The benefit depends on keeping the enlarged arrays busy while managing that tighter storage budget. [36] NPU 5 also adds native FP8. Using half the operand width of FP16 reduces storage and transfer demand, helping workloads fit the smaller local memory budget. Lower precision and format-dependent range make scaling and model validation part of deployment. Hardware activation functions further reduce work that would otherwise occupy the programmable DSPs. [1], [2] Microsoft requires an NPU to deliver at least 40 TOPS for Copilot+ PCs. Both Lunar Lake and Panther Lake meet this threshold, but Panther Lake uses significantly less silicon. GPU tiles Panther Lake is Intel’s first product with Xe3, its latest GPU architecture. It offers two different GPU tiles: a smaller GT1 tile with 4 Xe3 cores on Intel 3 and a larger GT2 tile with 12 Xe3 cores on TSMC N3E. Panther Lake allows us to compare the same GPU architecture across both Intel 3 and TSMC N3E. Wildcat Lake adds a third Xe3 implementation on Intel 18A. A future newsletter will detail Xe3 and its implementation differences across all three process nodes. GT2 scales Xe3 to a different physical layout, with render slices arranged vertically instead of GT1’s horizontal arrangement. Slice placement sets the distances to shared cache banks and the D2D interface. Those wires consume area and add delay, so scaling the number of Xe cores also requires a new balance of cache placement, routing and timing. [1] What’s immediately obvious is that the GT2 tile on TSMC N3E has much smaller Xe cores than GT1. These block areas include logic, caches, and routing. An Xe core on the GT1 tile is ~69% larger than one on Lunar Lake, and ~55% larger than one on GT2. Intel 3 therefore uses substantially more area per Xe core. The block-area gap exceeds the measured logic and SRAM density gaps, bringing routing, timing targets, cell mix, and floorplan allocation into the comparison. The measured vector/matrix engine region is almost unchanged between Lunar Lake and Panther Lake’s GT2 tile. Xe3 retains eight 512-bit vector engines and eight 2048-bit XMX engines per core. Its gains also come from feeding those engines more effectively: more resident threads hide stalls, and variable register allocation lets shaders trade registers per thread against the number of threads kept active. [1] The shared L1/SLM capacity increased by 33% from 192 KiB to 256 KiB, while its area increased only 5%, raising effective density by 27%. L1 retains reused cache lines, while software-managed SLM lets a thread group share data locally. Both reduce traffic to more distant memory. Allocating more SLM per group can also limit how many groups reside on a core at once. [1], [37] The GT1 tile carries 4 MiB of L2 against 16 MiB on the GT2 tile. GT1 divides its L2 cache into four 1 MiB banks, while GT2 uses eight 2 MiB banks. Each bank contains 128 macros, but each N3E macro stores 16 KiB, twice the Intel 3 macro’s 8 KiB capacity. The N3E macro is only 54% larger while holding twice as many bits, giving it 30% higher density: ~23.7 Mbit/mm² versus 18.3 Mbit/mm². Including bank-level circuitry, the gap widens to ~16.9 Mbit/mm² on GT2 versus ~10.4 Mbit/mm² on GT1. GT2 gains density with its macros storing more bits per unit area, and those macros occupy more of each cache bank. Larger macros spread decoder and sense-amplifier overhead across more storage, while a more compact bank layout reduces the share spent on control and routing. The compromise is longer wordlines and bitlines that carry more capacitance. [34] I/O tile Panther Lake uses two I/O tile variants, both fabricated on TSMC N6. The smaller one provides 4 PCIe 5.0 and 8 PCIe 4.0 lanes and serves lower-tier systems as well as those without a discrete GPU, while the larger one adds 8 PCIe 5.0 lanes, bringing the total to 20 lanes, for discrete-GPU connectivity. Panther Lake SKUs with the larger 10- or 12-Xe GPUs use the smaller I/O tile. [38] The smaller I/O tile adds a PCIe 4.0 block and a Thunderbolt block to Lunar Lake’s I/O layout, providing four additional PCIe 4.0 lanes and another Thunderbolt 4 port. Its repeated N6 blocks retain nearly identical areas and layouts. Reusing these proven PHYs and controllers avoids porting and requalifying external interfaces on 18A, where faster digital logic offers less benefit to circuits constrained by the off-chip link. [38] SemiAnalysis’s teardown lab (STEEL) dives deep into the world’s advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. We’re hiring technical experts from system to transistor and everywhere in between. Check out our Careers page. Panther Lake offers scalability and modularity through its disaggregated packaging that partition compute, GPU, and I/O silicon into separate tiles allowing for a suite of tile configurations. This partitioning makes the package part of Intel’s node economics as it determines how much leading-edge wafer area each product consumes, which functions can remain on other processes, and how much configuration freedom Intel can offer from a shared set of tiles. Furthermore, fabricating the compute and GPU tiles separately confines the new 18A process to the compute tile and allows graphics and I/O to use other, more established, and more cost-effective processes. For Panther Lake, the GPU and I/O tiles are assembled alongside the compute tile on a passive silicon base using Foveros-S. Intel’s current technology brief lists a nominal 36 µm pitch for Foveros-S. Through-silicon vias (TSVs) in the base connect the fine wiring above to the larger package connections below. The functional tiles sit side by side on that passive base in a 2.5D configuration. [39] Our cross-section through the compute and GPU tiles shows the package’s wiring hierarchy. Microbumps connect each active tile to the passive silicon base; its fine redistribution layer (RDL) carries the short, dense tile-to-tile links. TSVs carry connections through the base to the package substrate, which fans them out to the much coarser motherboard solder joints. The base supplies interconnect, while computation remains in the active tiles above it. [39] At the compute-tile edge, the higher-magnification inset shows a local microbump spacing of approximately 25.24 µm and a feature width of 12.33 µm. These local spacings are finer than Intel’s nominal Foveros-S value. The X-ray fields further confirm tighter neighboring bumps, consistent across every die-to-die area found on each tile. Additional X-ray analysis is offered after the paywall. Putting the memory controller beside the CPU removes the D2D transfer that CPU memory requests required in Meteor Lake and Arrow Lake. This avoids the extra transmitter, receiver, and link traversal, saving interface energy and latency. Panther Lake’s separate GPU still crosses a D2D link to reach DRAM, so its larger local caches also help contain package traffic. [1], [40] Smaller dies are less likely to contain a random fatal defect, and screening them before assembly prevents one bad tile from consuming a complete package of good silicon. Reuse also spreads design and qualification work across more products. Against those gains, Intel pays for the passive base, D2D circuits, extra bonding and test steps, and losses during assembly. Cost per working product across the portfolio captures the combined effect of wafer yield, reuse, test, and assembly. [29] Wildcat Lake packaging Intel launched Core Series 3, formerly Wildcat Lake, on 16 April 2026 for value mobile and edge systems. Wildcat Lake keeps 18A but removes the passive base and combines more functions on one die to simplify the package. The two products therefore reveal two distinct ways to commercialize the same leading-edge process. [41] Wildcat Lake’s 18A die combines up to two Cougar Cove P-cores, four Darkmont LP E-cores, two Xe3 cores and a smaller NPU. A separate platform-controller die supplies I/O, connected through UCIe, Intel’s first processor implementation of the standard. Consolidating graphics remove a tile boundary and the passive base, reducing assembly complexity for a modest-bandwidth value product. It also ties CPU and graphics scaling to the same die, giving up Panther Lake’s ability to swap in a much larger GPU. [42], [43] In July 2021, Intel CEO Pat Gelsinger set out an ambitious process roadmap aimed at regaining performance leadership by 2025, later described as five nodes in four years. Five years and one CEO later, Intel’s comeback story is not as unambiguously positive as Pat may have hoped. [44], [45] Intel once set the pace for process technology, bringing high-k metal gate technology and FinFETs into volume production years ahead of the rest of the industry. Its 22 nm FinFET process reached consumers with Ivy Bridge in 2012. [46] Intel’s integrated device manufacturing (IDM) model allowed its architects and process engineers to co-optimize products and processes. Starting with Sandy Bridge, Intel dominated x86, while AMD struggled with Bulldozer. That lead faltered at 14 nm and broke at 10 nm. Intel targeted a massive 2.7× density increase, but the node arrived years late and required several revisions before it could support Intel’s full lineup. This delay forced Intel to stretch 14 nm across six generations, while TSMC moved ahead in process technology and AMD recovered in x86. By 2019, Intel was still shipping 14 nm across most of its product stack, with its 10 nm client ramp focused on Ice Lake mobile processors. Meanwhile, TSMC was shipping N7 and N7+, and AMD’s Zen 2 compute chiplets used N7 to raise core counts and improve efficiency. Intel’s process failures were central to its decline, but unsound business decisions furthered their downward slide. Product delays compounded product mistakes, pushing client, server, and FPGA roadmaps off schedule. Several attempts to enter AI (Nervana and Gaudi) and networking (Tofino) also failed to establish lasting businesses. Intel’s recovery has focused on consumer CPUs and advanced packaging. Tiger Lake, Alder Lake, Lunar Lake and now Panther Lake have restored Intel’s consumer roadmap. On the process side, Intel 4 shipped with Meteor Lake, Intel 3 with Granite Rapids and Sierra Forest, and Intel 18A with Panther Lake. Intel has also made advanced packaging part of its foundry offering. However, Intel is still playing catch-up in servers. Several Xeon generations arrived years late and trailed contemporary AMD and Arm server CPUs in performance, efficiency, and core count. The process roadmap is back, but Intel does not hold the same process-technology leadership position it held prior to 10 nm. The introduction of gate-all-around nanosheets and backside power delivery are two of the biggest changes to transistor integration in a decade. Intel took on both changes at once: 18A paired its first RibbonFET with PowerVia in Panther Lake. Panther Lake is a substantial manufacturing milestone. Our cross-sections show how RibbonFET and PowerVia reshape local contacts and wiring, while the floorplans show where architectural consolidation and process choices save area. A sustained competitive lead depends on product performance, cost, yield, and the next implementation. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page.. [1] Intel, “Intel Tech Tour 2025 Panther Lake recap,” Doc. 866361, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/866361/ITT_2025_Panther_Lake_Recap1.pdf [2] Intel, “Core Ultra processors Series 3 datasheet, volume 1,” Doc. 872188-001, Jan. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/872188/872188-001.pdf [3] N. Horiguchi and E. Beyne, “Backside power delivery: How to power chips from the backside,” imec Reading Room, Nov. 25, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/how-power-chips-backside [4] W. Hafez et al., “Intel PowerVia technology: Backside power delivery for high density and high-performance computing,” in Proc. IEEE Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2023, pp. 1–2, doi: 10.23919/vlsitechnologyandcir57934.2023.10185208. [5] K. Fischer et al., “Intel 18A platform technology featuring RibbonFET (GAA) and PowerVia for advanced high-performance computing,” in Proc. Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2025, pp. 1–3, doi: 10.23919/vlsitechnologyandcir65189.2025.11075006. [6] K.-F. Cheng, C.-L. Teng, H.-Y. Huang, and H.-C. Chen, “Metal oxide composite as etch stop layer,” U.S. Patent 12 176 247 B2, Dec. 24, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12176247B2/en [7] S. W. King, “Dielectric barrier, etch stop, and metal capping materials for state of the art and beyond metal interconnects,” ECS J. Solid State Sci. Technol., vol. 4, no. 1, pp. N3029–N3047, 2015, doi: 10.1149/2.0051501jss. [8] A. V. Mule’, D. J. Towner, D. Seghete, C. R. Ryder, and A. A. Gonzalez, “Multi-layer etch stop layers for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20220102343 A1, Mar. 31, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20220102343A1/en [9] C.-C. Wang and J. H. Wang, “Interconnect structure with dielectric cap layer and etch stop layer stack,” U.S. Patent Appl. 20230253247 A1, Aug. 10, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20230253247A1/en [10] Y. J. Wu, K.-F. Cheng, C.-C. Lee, H.-K. Chang, and H.-Y. Huang, “Etch stop layer for interconnect structures,” U.S. Patent Appl. 20240332070 A1, Oct. 3, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240332070A1/en [11] M. G. Rainville, N. Shankar, K. S. Reddy, and D. M. Hausmann, “Deposition of aluminum oxide etch stop layers,” U.S. Patent Appl. 20180197770 A1, Jul. 12, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20180197770 [12] J. S. Leib et al., “Conductive lines having molybdenum liner and tungsten fill for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20240429126 A1, Dec. 26, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20240429126 [13] M. Naik, “Cobalt enables power and performance scaling at single-digit logic nodes,” Applied Materials, Dec. 17, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://www.appliedmaterials.com/us/en/blog/blog-posts/cobalt-enables-power-and-performance-scaling-at-single-digit-logic-nodes.html [14] Lam Research, “Breaking through AI’s invisible barrier with molybdenum,” Lam Research Newsroom, May 6, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://newsroom.lamresearch.com/molybdenum-metallization-ai-revolution [15] P. Yashar, G. Malyavanatham, and H. Vijwani, “Integrated circuit interconnect structures with niobium barrier materials,” U.S. Patent Appl. 20240112951 A1, Apr. 4, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240112951A1/en [16] Applied Materials, “Applied Materials unveils chip wiring innovations for more energy-efficient computing,” Applied Materials Investor Relations, Jul. 8, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://ir.appliedmaterials.com/news-releases/news-release-details/applied-materials-unveils-chip-wiring-innovations-more-energy [17] Samsung, “Samsung showcases AI-era vision and latest foundry technologies at SFF 2024,” Samsung Semiconductor, Jun. 13, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://semiconductor.samsung.com/news-events/news/samsung-showcases-ai-era-vision-and-latest-foundry-technologies-at-sff-2024/ [18] C. W. Yeung et al., “Channel geometry impact and narrow sheet effect of stacked nanosheet,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2018, pp. 28.6.1–28.6.4, doi: 10.1109/iedm.2018.8614608. [19] S. Mochizuki et al., “Evaluation of (110) versus (001) channel orientation for improved nFET/pFET device performance trade-off in gate-all-around nanosheet technology,” in Proc. Int. Electron Devices Meeting (IEDM), Dec. 2023, pp. 1–4, doi: 10.1109/iedm45741.2023.10413854. [20] D. G. Ouellette et al., “Fabrication of gate-all-around integrated circuit structures having molybdenum nitride metal gates and gate dielectrics with a dipole layer,” U.S. Patent 12 051 698 B2, Jul. 30, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12051698B2/en [21] imec, “Advancing the CFET-based device roadmap with novel integration modules and standard-cell architectures,” imec, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/advancing-cfet-based-device-roadmap-novel-integration-modules-and-standard-cell [22] A. Reznicek, X. Miao, C. Lee, and J. Zhang, “Wrap around contact for nanosheet source drain epitaxy,” U.S. Patent 11 302 813 B2, Apr. 12, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US11302813B2/en [23] J. A. Kittl, J. G. Hong, D. R. Palle, and M. S. Rodder, “Methods for varied strain on nano-scale field effect transistor devices,” U.S. Patent 9 978 833 B2, May 22, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9978833B2/en [24] S. Gandikota et al., “Method of reducing metal gate resistance for next generation NMOS device application,” Int. Patent Appl. WO 2024/137272 A1, Jun. 27, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/WO2024137272A1/en [25] J. Zhang et al., “Full bottom dielectric isolation to enable stacked nanosheet transistor for low power and high performance applications,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2019, pp. 11.6.1–11.6.4, doi: 10.1109/iedm19573.2019.8993490. [26] C. Yoo, J. Chang, Y. Seon, H. Kim, and J. Jeon, “Analysis of self-heating effects in multi-nanosheet FET considering bottom isolation and package options,” IEEE Trans. Electron Devices, vol. 69, no. 3, pp. 1524–1531, Mar. 2022, doi: 10.1109/ted.2022.3141327. [27] S. S. Pradhan, D. B. Bergstrom, J.-S. Chun, and J. Chiu, “Tungsten gates for non-planar transistors,” European Patent Appl. EP 3 506 367 A1, Jul. 3, 2019. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/EP3506367A1/en [28] L. Schloss and X. Ba, “Tungsten films having low fluorine content,” U.S. Patent 9 754 824 B2, Sep. 5, 2017. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9754824B2/en [29] Intel Foundry, “Accelerating AI and HPC with advanced process and packaging technologies,” Doc. 367370-001US, Jun. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-11/intel-foundry-hpc-ai-brief.pdf [30] M. Lofrano, X. Chang, H. Oprins, and Z. Tokei, “Mitigating the thermal bottleneck in advanced interconnects,” imec, Sep. 28, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/mitigating-thermal-bottleneck-advanced-interconnects [31] S. Bair, “Intel at ISSCC 2025: Navid Shahriari invited talk, eight papers, forums, panelist & product details,” Intel Community, Feb. 19, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://community.intel.com/t5/Blogs/Tech-Innovation/Edge-5G/Intel-at-ISSCC-2025-Navid-Shahriari-Invited-Talk-Eight-Papers/post/1667592 [32] D. Chandra, E. Potladhurthi, D. R. S. Reddy, and K. S. Rengarajan, “Tunable negative bitline write assist and boost attenuation circuit,” U.S. Patent Appl. 20160203857 A1, Jul. 14, 2016. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20160203857A1/en [33] Synopsys, “Advantages of firmware-based training in high-speed DDR IP,” Synopsys IP Technical Bulletin. Accessed: Sep. 14, 2026. [Online]. Available: https://www.synopsys.com/articles/firmware-based-training-ddr-ip.html [34] N. Muralimanohar, R. Balasubramonian, and N. P. Jouppi, “CACTI 6.0: A tool to understand large caches,” Hewlett-Packard Laboratories, 2009. Accessed: Sep. 14, 2026. [Online]. Available: https://users.cs.utah.edu/~rajeev/cacti6/cacti6-tr.pdf [35] Intel, “Intel Tech Tour 2024 Lunar Lake AI hardware accelerators,” Doc. 824436, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/824436/2024_Intel_Tech%20Tour%20TW_Lunar%20Lake%20AI%20Hardware%20Accelerators.pdf [36] Y.-H. Chen, J. Emer, and V. Sze, “Eyeriss: A spatial architecture for energy-efficient dataflow for convolutional neural networks,” in Proc. 43rd ACM/IEEE Annu. Int. Symp. Comput. Archit. (ISCA), Jun. 2016, pp. 367–379, doi: 10.1109/isca.2016.40. [37] Intel, “Introduction to the Xe-HPG architecture,” Doc. 758306, Nov. 4, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/developer/articles/technical/introduction-to-the-xe-hpg-architecture.html [38] Intel, “Core Ultra processors Series 3 for the edge,” Doc. 855291. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/855291/Intel%C2%AE%20Core%E2%84%A2%20Ultra%20Processors%20Series%203%20for%20Edge%20Overview_2.pdf [39] Intel Foundry, “Foveros technology brief,” Doc. 366411-001US, Feb. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-07/foveros-25d-product-brief.pdf [40] D. Das Sharma, “UCIe: Building an open chiplet ecosystem,” UCIe Consortium, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.uciexpress.org/_files/ugd/0c1418_c5970a68ab214ffc97fab16d11581449.pdf [41] Intel, “Intel launches Intel Core Series 3 processors,” Intel Newsroom, Apr. 16, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-launches-intel-core-series-3-processors-changing-the-game-for-everyday-computing.html [42] Intel, “Core Series 3 launch press deck,” Apr. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://download.intel.com/newsroom/2026/Intel-Core-Series-3/Intel-Core-Series-3-Launch-Press-Deck.pdf [43] Intel, “Intel outlines architectures for agentic AI at Hot Chips 2026,” Intel Newsroom, Aug. 24, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-outlines-architectures-for-agentic-ai-at-hot-chips-2026.html [44] Intel, “Intel accelerates process and packaging innovations,” Intel Investor Relations, Jul. 26, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/filings-reports/all-sec-filings/content/0001193125-21-224438/d199788dex991.htm [45] Intel, “Intel reports third-quarter 2021 financial results,” Intel Investor Relations, Oct. 21, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/1505/intel-reports-third-quarter-2021-financial-results [46] Intel, “3rd generation Intel Core processors bring exciting new experiences and fun to the PC,” Intel Investor Relations, Apr. 23, 2012. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/577/3rd-generation-intel-core-processors-bring-exciting
Why Playing Titans Made Eagles QB Jalen Hurts "Emotional"
Philadelphia’s star quarterback reflects on a hard-fought victory at Nissan Stadium, where a powerful tribute to childhood hero Steve McNair fueled an intensely personal and nostalgic performance.
Owner says fencing outside longtime Greektown liquor store hurts business, sues
Athens Liquor owner Ather Butris claims street festival fencing has become a barrier to his bottom line, prompting a lawsuit against the Greektown Neighborhood Partnership.
Texas’ delay of maternal death report hurts women, lawmakers say
The highly anticipated report, which includes deaths that occurred after Texas banned abortions, has recommendations on how to reduce pregnancy risks.
Fox Sports Radio launches ‘College Football with Stugotz & The Bear’ podcast
Jon “Stugotz” Weiner has moved on from his “hurtful” split from The Dan Le Batard Show, formerly The Dan Le Batard Show with Stugotz, and he’s making good on his promise to “build a f*cking empire.” On Thursday, Fox Sports Radio announced College Football with Stugotz & The Bear, distributed by iHeartPodcasts and debuting Friday, Sept. 25.…
Texas advocates warn proposed cuts to health, assistance programs could hurt vulnerable communities
The Texas Health and Human Services Commission proposed cuts to more than 20 client services programs. Dozens of Texas advocates testified at a legislative budget board hearing Thursday to ask state lawmakers to protect those programs.
Rhett Lashlee 'Confident' In SMU Turnaround vs. Missouri State
The Mustangs hurt themselves in the loss to Louisville, but Lashlee is confident his team has learned its lesson.
Texas advocates warn proposed cuts to health, assistance programs could hurt vulnerable communities
The Texas Health and Human Services Commission proposed cuts to more than 20 client services programs. Dozens of Texas advocates testified at a legislative budget board hearing Thursday to ask state lawmakers to protect those programs.
Bellingham's business closures more of a churn than a trend, industry onlookers say
Full-service restaurants hurting most. But when one place closes, another opens up
Opinion: Social media & local politics: The death of citizen discourse?
Acrimonious social-media pile-ons can do much more than cause hurt feelings. On a personal level, at their worst, they result in court cases alleging slander and defamation. They contribute little of a positive nature to public discourse. Even more significantly, something larger is at play that threatens our very system of government and citizen involvement
Vikings Land Surprising New Weapon in 2027 Mock Draft
It’s never too early for a mock NFL draft, and a recent one from Sports Illustrated has the Minnesota Vikings selecting a running back. Gilberto Manzano has the Vikings selecting SEC star Kewan Lacy with the 29th overall selection. Age And Depth Hurting Vikings Running Back Room Depth at the position is important, and as […] The post Vikings Land Surprising New Weapon in 2027 Mock Draft appeared first on HEAVY.
Vikings RB Aaron Jones is Hurt and Not Practicing
The Minnesota Vikings revealed some more tough news on their already injured backfield. Aaron Jones has an injury and is not practicing.
Bear Up, Bear Down: Who helped, hurt stock vs. Vikings
Following their Week 2 loss to the Vikings, here are the Bears players whose stock is rising and falling.
Worsening El Nino threatens Asia with severe drought, potentially threatening global food security
El Nino already is depleting water supplies, hurting fish catches and jeopardizing Asia's globally important agriculture industry.
Penguins Injury Updates on Kindel, Brazeau; Koivunen Hurt, Too
Pittsburgh Penguins center Ben Kindel did not return to the bench for the second period of the team’s first preseason […]
What CDC's new teen health survey shows, and what it skips
Teen suicide risk hit a 10-year low in 2025. Guns, sexual violence, and self-harm. Where are the 2025 data on transgender teens? Missing data changes public health policy. Teen suicide risk hit a 10-year low in 2025. CDC asked more than 10,000 high school students over 100 questions in spring 2025. Yesterday, it published a report covering a fraction of them. The report focsed on five areas: diet, physical activity, sleep, digital behaviors, and mental health, reflecting the priorities of the Make America Healthy Again movement. There was good news. Fewer teens seriously considered suicide in 2025 than in any survey year since 2015: 14%, down from 20% in 2023. Sadness fell. Underlying Conditions is a reader-supported publication. To receive new posts and support my work, consider becoming a free or paid subscriber. Subscribe Sports participation, which dipped to 49% in 2021, is back to its 2015 level of 58%. Daily PE fell from 27% to 20% in two years, while fewer students eat breakfast daily than a decade ago. Guns, sexual violence, and self-harm. The questionnaire is public, and it goes well beyond those five areas. Students answered questions about sexual violence, self-harm, and whether they got help when they felt sad or anxious. They said how quickly they could get a loaded gun. They reported whether food ran out at home and whether they felt close to people at school. There were questions about sexual identity, including whether they were transgender. The report did not publish any of the answers students gave to those questions. CDC posts the raw survey data online, so anyone can see what the report left out. The report doesn’t cover the health of sexual minority students. Among students who identified as gay, lesbian, bisexual, questioning, or another non-straight identity, persistent sadness fell from 66% to 57% between 2023 and 2025. Serious thoughts of suicide fell from 41% to 30%. Those drops were bigger than the ones among straight students, although the gap remains wide: 28% of straight students reported persistent sadness, about half the rate of LGBQ+ students. About 1 in 7 girls reported sexual violence in the past year. One in 6 students hurt themselves on purpose. Among students who needed help for sadness or anxiety, half rarely or never got it. And among students who had seriously considered suicide, 43% said they could get a loaded gun without an adult’s permission. One protective factor rose sharply. In 2023, 55% of students said they felt close to people at their school; in 2025, 63% did. CDC’s earlier research ties that kind of connection to better mental health. Where are the 2025 data on transgender teens? In 2023, CDC's national survey asked high school students, for the first time, whether they were transgender. Their answers are the only nationally representative data on transgender teens, and their mental health is by far the worst of any demographic. That year, 71% of transgender students reported persistent sadness, 54% seriously considered suicide, and 26% attempted it, compared with 38%, 18%, and 8% of cisgender students. But we don’t have 2025 data. The timing matters because students took the survey in spring 2025, as federal policy toward transgender youth shifted. On January 28th, an executive order directed agencies to end federal support for gender-affirming care for people under 19, and several hospitals paused that care within days. In February, the CDC said it would no longer process transgender identity data. Later in 2025, the Supreme Court upheld Tennessee’s ban on gender-affirming care for minors, and HHS ended the 988 Lifeline’s dedicated line for LGBTQ+ youth. Researchers disagree about how much state policy shapes trans teens’ mental health. A 2024 Trevor Project study estimated that anti-trans laws increased suicide attempts among trans and nonbinary youth. Critics dispute its methods and its estimates. The 2025 survey could have added national evidence to that fight. CDC collected the data but hasn’t publicly released it. Missing data changes public health policy. Surveillance works as a feedback loop. It can show officials whether their policies help or hurt. The CDC didn’t provide data on the students most exposed to transgender policy shifts. The report kept measures that frame health as personal choice, like fruit, breakfast, and sports. It left out measures that track policy, like gun access, mental healthcare, food at home, and school climate, all of which respond to what legislators and agencies decide. HHS did not respond to questions that I sent on September 21st.
Chicago Bears Get Valuable Jalen Hurts Lesson From Titans Star
Clearly, Philadelphia Eagles quarterback Jalen Hurts taught the NFL a valuable lesson at this point. The more players and coaches from the other side taunt or challenge him, the worse off it is for defenses going up against him. The Tennessee Titans recently learned a lesson from the former Super Bowl MVP. While the Titans […] The post Chicago Bears Get Valuable Jalen Hurts Lesson From Titans Star appeared first on HEAVY.
Jalen Hurts Taunts Jeffery Simmons After Eagles Beat Titans
Jalen Hurts taunted Jeffery Simmons after the Philadelphia Eagles beat the Tennessee Titans.
Rising health care costs are hurting this conservative district. But it may not change any votes.
Even in the conservative district of former Congresswoman Marjorie Taylor Greene, rising health care costs are turning people against the GOP. But it may not change the outcome of November elections.
Sauce Gardner Injury Update Isn’t Best News For Colts
The Indianapolis Colts had already lost Alec Pierce to a heel injury on Sunday Night Football. They really didn’t need to see anyone else go down. That’s when Sauce Gardner got hurt, though — with the NBC broadcast quickly going to commercial as Mike Tirico informed viewers that Gardner had an injury. It quickly created […] The post Sauce Gardner Injury Update Isn’t Best News For Colts appeared first on HEAVY.
I-5 Rose Quarter closure puts pressure on local businesses
Week 2 of Portland’s southbound I-5 Rose Quarter closure is lengthening commutes and hurting nearby businesses. Hayden Island’s Island Cafe reports sales down 40%, while I-5-area restaurants hope customers still come.
Colts’ WR Depth Chart Changes After Alec Pierce Injury
The Indianapolis Colts are going to have to dig deeper into their WR depth chart on Sunday. They lost Alec Pierce to a first-half injury, and they already were missing one wideout for Sunday Night Football against the Kansas City Chiefs. Pierce had one catch before exiting. He actually got hurt on a play in […] The post Colts’ WR Depth Chart Changes After Alec Pierce Injury appeared first on HEAVY.
Jalen Hurts Makes History In Eagles’ Win vs Titans
The Philadelphia Eagles landed another impressive hero effort from the star quarterback Jalen Hurts on Sunday afternoon in Week 2. Amid the tight victory, which included another clutch showing from Hurts, the veteran passed the former Philadelphia Eagles quarterback Carson Wentz on a historic Eagles list. Jalen Hurts Makes History In Eagles’ Win vs Titans […] The post Jalen Hurts Makes History In Eagles’ Win vs Titans appeared first on HEAVY.
Jalen Hurts credits offseason chemistry for Eagles’ late comeback win
Jalen Hurts credited offseason throwing sessions, film study and chemistry for the Eagles’ game-winning drive against the Titans
Tennessee Titans stumble late in loss vs Jalen Hurts, Philadelphia Eagles
Jalen Hurts and the Philadelphia Eagles avoided an upset, defeating the Tennessee Titans 24-20 on Sept. 20.
La Tapatia opens Downtown Fresno retail store
La Tapatia Tortilleria has opened a larger Downtown Fresno retail store. Read how high-speed rail construction hurt access to its Belmont location.
Poll: Most voters say Trump has hurt the economy as competitive midterm election looms
Trump’s approval and economic ratings point to a gloomy environment for the GOP, but the race for Congress is closer than in his first midterm, with the Democratic Party still unpopular.
Familiar concerns as Arsenal women draw with Manchester United
Arsenal Women remain unbeaten, but another draw has revived concerns over the issue that hurt their title challenge last season.Photo by Sarah Ray-Gain/Getty ImagesArsenal Women remain unbeaten at the...
Exeter’s Ridl blow
EXETER winger Campbell Ridl is set to miss much of the season after suffering a knee ligament injury. Ridl was a breakout star last season scoring 17 tries in 24 games including one in the final defeat to Northampton. The 21-year-old former England U20 flyer was hurt in Exeter’s opening pre-season game when they lost […] The post Exeter’s Ridl blow appeared first on The Rugby Paper .
Harmless myths everyone still believes that science has totally debunked
Harmless myths everyone still believes that science has totally debunked Some myths survive purely because correcting them feels unnecessary. Nobody gets hurt believing a goldfish forgets everything in three seconds, so nobody bothers checking. That […]
Colorado small business owner struggles with record diesel prices and energy inflation: "Prices are exorbitant"
With diesel prices nearly doubling, businesses that rely on diesel are hurting.
SBA hosts pop-up for local businesses hurt by flooding to apply for federal aid
Much-needed aid is on the way to parts of Indiana most affected by flooding.
ESPN Projects Jalen Hurts' Stat Line for Eagles-Titans Game
ESPN projected Jalen Hurts' stat line for the Philadelphia Eagles-Tennessee Titans game.
Jalen Hurts’ history against Tennessee entering the Week 2 matchup
A look at Hurts’ statistics and previous performances against Tennessee
Engrams Embedding Entendre: Codesign for Efficient DRAM/SSD Offloading
Engram extends standard token embeddings with learned multi-token lookups. Recurring local patterns retrieve vectors directly, reducing the need to reconstruct them through attention and feed-forward layers. With Engram model architecture optimization, it allows for lower HBM capacity to be needed for models at the same quality. This does not mean there won’t be an insane demand for HBM but it just means that model architecture will continue to innovate around constraints. This model architecture design is naturally codesigned for parameter offloading: each token accesses a few embedding rows whose addresses depend on token IDs, not hidden states. The runtime can prefetch those rows from host DRAM while earlier layers compute, keeping the table outside HBM without transferring entire weight matrices. Our Memory model contains our latest estimates of quarter by quarter HBM, DRAM, & NAND supply and demand. Offloading frees HBM for model weights and KV cache, potentially supporting larger batches or more concurrent sessions. When DRAM becomes the next constraint, NVMe offers another tier. Recommendation systems already cache frequently or recently accessed embedding rows in faster memory while backing colder rows with SSDs. After NVIDIA roadmap had to change due to massively despec’ing Rubin Ultra from 1024GB to now ~200GB of HBM per chip, model architecture optimizations like emgram maybe helpful. Our DeepSeek-V4.1-Flash configuration uses roughly 189 GiB of memory for Engram. We replace it with a memory-mapped (mmap) file and measure serving performance with offload to SSD. Later on in our report, we will show our Engram offloading experiments along with the official InferenceX agentic inference serving results on Engram models like DeepSeekv4.1 Flash across all 6 NVIDIA GPU SKUs along with MI355X. Unsurprisingly, the CUDA Moat is still mogging MI355X on the ultra popular DeepSeekV4.1 Flash model. We also show how even on high capacity HBM SKUs, offloading emgrams to DRAM could result in even better performance for most of the pareto than keeping the emgram in HBM. Our benchmark has been widely reproduced, validated and/or supported by almost every major buyer of compute from Google Cloud to Microsoft Azure to Oracle, to Meta and many more. Furthermore, it has the support of the ML community including from vLLM, LMCache, SGLang, PyTorch, Huggingface and the support of major labs like OpenAI, MiniMax, ZAI, Qwen, Moonshot Kimi, etc. Star the InferenceX GitHub repository if you find the open-source benchmark and data useful!. InferenceX is the only inference benchmark in the world to have TPUv7, Jalapeño, Nvidia Rubin NVL72, AMD, and soon, SambaNova and Trainium. Due to how realistic AgentX scenario is to real world agentic inference workloads, AMD has committed to collaborating on MI455X UALoE72 too. DeepSeek did not release the original paper’s two trained Engram models. We replicated its setup on fineweb-edu using the released code and training hyperparameters, at an estimated 6E18 FLOPs per run. We observed the same U-shape scaling: Engram improved performance over pure MoE baselines. We also reproduced DeepSeek’s results, where earlier-layer representations with Engram resembled those of later layers. Like the original Engram paper, it is possible to probe Engram’s gate scores to see what n-grams DeepSeek-V4.1-Flash makes the most use of. Our gate scan finds names, code fragments, relational phrasing, and boilerplate. These examples prioritize interesting-ness over gate strength. One unexpected result was Wright : Ace Attorney. These examples suggest learned memory optimizes the training objective, not a judgment of which facts deserve storage. Licenses, bibliography fragments, API scaffolding, and website furniture can provide prediction shortcuts, so the value of additional Engram capacity may depend on what survives data preparation. This does not show that table capacity is “wasted”: the evaluation-corpus scan establishes neither training exposure nor the capacity occupied by each category. For offloading, strong gates do not identify cache-hot rows. Low gates do not automatically save reads either: computing the gate requires the retrieved key and undoes the performance gain of a fused kernel. Skipping reads would require a separate usefulness predictor before retrieval. In the original paper’s inference-time ablation, factual-knowledge benchmarks retained just 29–44% of their original performance, while reading comprehension retained 81–93%. This is due to the training–inference mismatch. The resulting degradation therefore measures this trained model’s dependence on Engram, not the performance difference between models trained with and without it. In our ablations, suppressing Engram worsens token likelihood across all evaluated domains, especially encyclopedia text and several code corpora. Surprisingly, GSM8K accuracy stays within measured run-to-run variation and removing Engram has no effect. Engram is not a detachable dictionary beside an unchanged MoE. Removing it changes downstream features and expert selection. We tested whether rerouting hurts or compensates by holding tokens fixed in a teacher-forced experiment on CRUXEval, a code-reasoning benchmark of small Python functions where the model predicts a function’s output from its code and an input, and scoring the reference answer. Removing Engram raised answer loss from 0.2848 to 0.3093 bits/token. Forcing the ablated model to use the original Engram-on expert choices made it worse still, at 0.3375 bits/token. Rerouting partially compensates for the missing memory. Memory features and expert selection work together, rather than following a clean “memory stores facts; experts reason” division. On the same CRUXeval, removing Engram during either phase reduced accuracy and increased generated tokens; removing it throughout produced the largest changes. Keeping Engram for prefill leads to more correct answers than keeping for decode likely due to semantically richer KV cache transferred to decode workers, allowing it to mitigate some of the performance loss. Engram’s table is large, but each lookup is small. DeepSeek-V4.1-Flash requests 24 rows at each of two Engram layers, about 12.4 KiB per processed token position across the model, or 3.1 KiB per GPU when split across four GPUs. Currently as of Day 7 since Model Release, MI355X is still 2-4x worse performance per dollar compared to B200 even when normalized by Mi355X’s lower TCO. Our full total cost of ownership breakdown comes from our AI Cloud TCO Model along with monthly market surveys of over 100+ gpu clouds & gpu cloud customers. On the Day 0 release of DeepSeekv4.1 Flash, NVIDIA vLLM works out of the box with zero issues across all 6 SKUs: H100, H200, B200, B300, GB200, GB300! This was thanks to the amazing work by the NVIDIA & Interact teams! In comparison, AMD vLLM did not work on day 0 for DeepSeekv4.1 Flash.Source: SemiAnalysis InferenceX AMD’s vLLM documentation points to using vllm/vllm-openai-rocm:deepseekv41-flash-0909, but from hour 0 of the model release to hour 23, AMD has not publicly released the image. AMD claims, “SPEED IS THE MOAT,” yet it has still not released it by the 23rd hour. We wish that, going forward, the AMD team has a better process for hour 0 model releases. Eventually when they did publicly release for “day 0” image support, performance-wise, it is currently up to 14.8x worse perf per dollar than H200 and up to 42x worse perf per dollar than B200/B300. The power of the CUDA MOAT is NVIDIA’s collaboration with its massive 6 million-developer community ecosystem including most of the vLLM & SGLang & Tokenspeed maintainers which means that CUDA is optimized on day 0. Overall, AMD did make significant improvements but the performance per dollar is still currently 2-4x worse than B200. AgentX Engram DRAM Offloading Improving Performance The HBM and DRAM offload use the same GPU kernel to select and dequantize rows. With HBM, it reads GPU memory; with Unified Virtual Addressing (UVA), it reads pinned host memory directly. Both support full decode graphs. Moving the table into HBM accelerates only the sparse lookup, leaving decoder computation and communication unchanged, resulting in little overall benefit while consuming memory otherwise available to KV cache. Another benefit of Engram offloaded to DRAM which means you can reduce the communication overhead by using less HBM GPUs per replica. For example, when enabling Engram offloading on B300, we are able to switch from TP4 to now TP2 which improves the pareto curve by up to 1.6x. When iso-model quality, less HBM is required as the engrams could be offloaded to host DRAM. Thus HBM bandwidth matters way more than HBM capacity. For inference workloads where memory bandwidth matters the most, 4-hi HBM provides the best $/bandwidth and therefore lowest cost per token. If China continues to make more and more revolutionary model architecture innovations, soon it could potentially 0Hi HBM stacks. [ ](https://newsletter.semianalysis.com/p/long-live-the-short-king-why-4-hi) [ Long Live the Short King: Why 4-hi HBM Wins ](https://newsletter.semianalysis.com/p/long-live-the-short-king-why-4-hi) Myron Xie, Bryan Shan, and 3 others · Sep 13 [ Read full story ](https://newsletter.semianalysis.com/p/long-live-the-short-king-why-4-hi) Moreover, on B300 and week-0 stack, moving the Engram table back to HBM did not improve results and stay within run-to-run variance. This is a result of the work optimizing DRAM offload, such as async, and overlap. SSD Offloading On B200, we created a unoptimized vLLM fork and stored the Engram tables in memory-mapped files on local SSDs. File backing lets the OS reclaim table pages when other applications need RAM. Pages already cached in memory can be served without reading the SSD again. Furthermore, note that we were unable to turn on GDS The unoptimized SSD implementation changes how rows reach the GPU. It copies row IDs to the CPU, deduplicates them, gathers the requested rows into pinned buffers, copies those rows back to the GPU and dequantizes them. This work runs between segments of the GPU execution graph. Native UVA performs row selection and dequantization directly on the GPU, avoiding the CPU round trip. A warm filesystem cache removes physical SSD reads, but leaves the coordination, row gathering and transfers. This is why a file already cached in RAM can still perform worse than a pinned DRAM table. The comparison measures the whole serving path; it does not separate the time spent on each of these operations. B200 DRAM dominates both measured SSD serving curves in total tokens per dollar and P90 interactivity. Near 125 tokens/s/user, DRAM delivers 121 million total tokens per dollar versus 52 million for SSD. For production serving, SSD offloading is likely not worth the tradeoff. On the B200 configurations we measured, SSD offloading loses on both measures: every observed SSD point has a DRAM alternative that delivers higher P90 interactivity and more total tokens per dollar. The only points where Cheaper storage does not automatically produce a cheaper inference service. Moving Engram to SSD leaves the same four expensive GPUs and the rest of the server in place. Reclaiming RAM only creates an economic benefit if it enables a cheaper server configuration or additional useful capacity. The current unoptimized path provides neither benefit, and the filesystem cache still consumes RAM when table pages are resident. Next we will look at the mechanisms and specific implementation of ngrams from DeepSeekv4.1 Flash, LongCat, Qwen3.8 Flash Next.
‘Never hurt nobody’ – Pat McAfee addresses ESPN smoking allegations
Pat McAfee is certainly proving a divisive figure among NFL fans this season due to just how much air time he is getting on ESPN. The former NFL punter has been catapulted into presenter jobs since his retirement, but some now feel he is pushing his luck.
Eagles news: Jordan Mailata dismisses Jeffery Simmons' Jalen Hurts slander
The Philadelphia Eagles are gearing up for their clash against the Tennessee Titans at Nissan Stadium on Sunday. The Eagles are coming off a narrow escape against the Washington Commanders , 24-22, in Week 1. Philadelphia quarterback Jalen Hurts dusted off a sluggish start and made big plays in the fourth quarter to complete the hard-earned win. […] The post Eagles news: Jordan Mailata dismisses Jeffery Simmons' Jalen Hurts slander appeared first on ClutchPoints.
Bills WR DJ Moore injured against the Lions
The Bills’ top wide receiver was hurt in the second quarter against the Detroit Lions
High gas prices hurting small business owners, customers in Columbus
The rising cost of unleaded and diesel gas is creating challenges for business owners.
Nico Collins injury update after Texans WR hurt in practice
Will Nico Collins play this week? The Texans' lead receiver was injured in practice on Wednesday, Sept. 16.
Doral business owners say increased ICE activity is hurting business
Industry titans’ warning to Congress: Do what we say or health insurance premiums go up
Some of America’s biggest companies say a law aimed at protecting patients is about to hurt them instead.
Dartmouth Health CEO says layoffs targeted administrative, leadership positions
A day after Dartmouth Health announced it was cutting hundreds of jobs, the healthcare organization's CEO said the layoffs were planned to avoid hurting patient care.
'It's soul-sucking': Riverside Drive construction creates traffic headaches for East End businesses
East End business owners say Riverside Drive construction is cutting off customers and hurting sales. MSD says it is working to address their concerns.
Did Eagles violate NFL injury report rules with Landon Dickerson?
Eagles coach explains why guard Landon Dickerson wasn't on the injury report even though Dickerson said he hurt his knee a few weeks ago
Toward A Proper Definition Of “Overrated”
The YouTube title of this week’s All Ball episode is “Jalen Hurts Is OVERRATED.” This sort of headline is known as “clickbait,” or “ragebait.” But what if I told you that Arif Hasan and I spent time in this episode striving toward a more nuanced version of “overrated,” a word which itself has become overrated?…
Prime Healthcare says it’s saving a Maine health system. Many question its tactics.
Officials at Central Maine Healthcare in Lewiston say the changes are needed to make the health system financially solvent. Some providers say they are hurting care.
Vargas: Privacy laws shouldn’t hurt local businesses
I hope lawmakers remember that consumer privacy and small-business success are not competing goals.
US-Canada trade war further taxes small businesses as costs rise during the Iran war
Small business owners in the United States and Canada say a trade war between their countries is hurting sales while they are also dealing with rising expenses from higher fuel costs.
Why Jalen Duren’s Current Plan Could Badly Hurt Pistons
The Detroit Pistons are in a tough position trying to keep Jalen Duren without making a terrible financial decision. Duren had a breakout regular season to make the All-Star team and All-NBA team for the first time. However, a horrible postseason exposed all his flaws and made it unlikely that he’ll be worth max contract […] The post Why Jalen Duren’s Current Plan Could Badly Hurt Pistons appeared first on HEAVY.
US-Canada trade war further taxes small businesses as costs rise during the Iran war
Small business owners in the United States and Canada say a trade war between their countries is hurting sales while they are also dealing with rising expenses from higher fuel costs.
Editorial: Politics hurts economy
The longest serving woman in the history of the United States Congress is putting her political interests ahead of the economic interests of northwest Ohio. ...
How fitness science is helping young athletes prevent injuries
According to the Centers for Disease Control, 2 million high school athletes are hurt each year in the U.S. between playing and practicing.
How fitness science is helping young athletes prevent injuries
According to the Centers for Disease Control, 2 million high school athletes are hurt each year in the U.S. between playing and practicing.
How fitness science is helping young athletes prevent injuries
According to the Centers for Disease Control, 2 million high school athletes are hurt each year in the U.S. between playing and practicing.
Pundit thinks too many foreigners are hurting Juventus
Juventus started their match against Sassuolo with no outfield player of Italian origin, setting an unwanted record for a club that remains a symbol of Italian football.In recent seasons, Juventus hav...
Ranking Members Markey, Velázquez, American Small Businesses Fight Back Against Trump SBA’s Discriminatory Anti-Immigrant Lending Policies
More than 120 small businesses and organizations pen letter of support for Ranking Member Markey’s resolution striking down Trump’s ban on awarding SBA loans to green card holders Letter (PDF) (Washington, September 15) – Ranking Member Edward J. Markey (D-Mass.) today garnered additional support from Main Street small businesses for his Congressional Review Act (CRA) resolution to rescind the Trump administration’s discriminatory policy that bans green card holders from accessing essential Small Business Administration (SBA) loans. In a letter of support, more than 120 American small businesses and community organizations, led by Small Business Majority, applauded Ranking Member Markey’s efforts to overturn the Trump administration’s anti-immigrant lending ban and advocated for the passage of Ranking Member Markey’s CRA resolution in the Senate. House Small Business Committee Ranking Member Nydia M. Velázquez (D-NY-7) is leading the resolution in the House of Representatives. The Trump administration’s green card holder ban is the most recent escalation of SBA’s draconian citizenship restrictions that are killing jobs and putting the American Dream further out of reach for entrepreneurs. In Fiscal Year 2025, Trump’s SBA made an estimated $5.5 billion in loans to green card holders, which supported more than 80,000 jobs nationwide. “The Trump administration’s continued attacks on American small businesses and jobs are anti-American, they’re discriminatory, and they’re dragging down our communities and our economy. Thanks to partners like Small Business Majority, countless small businesses, and community organizations, we are fighting back and holding them accountable,” said Ranking Member Markey. “I will not stop fighting to rescind this hateful policy that attacks American entrepreneurs and prevents them from pursuing the American Dream.” “Small businesses and organizations across the country are sending a clear message that the Trump administration's discriminatory lending rules are bad for business,” said Ranking Member Velázquez. “I want to thank Small Business Majority for leading this effort and amplifying the voices of the entrepreneurs who create jobs and strengthen our local economies. As Ranking Member of the House Small Business Committee, I will keep pushing to stop these attacks on the American Dream and ensure that every eligible entrepreneur can access the capital they need to succeed.” In the letter, the small businesses write, “Congress must reaffirm its commitment to serving those who are rightfully and legally entitled to accessing key government guaranteed loan programs in pursuit of the American Dream. Restoring access to responsible, government-guaranteed loans for such a critical segment of our economy will allow thousands of small businesses to access the capital they require to grow and invest in American communities. If Congress does not act to protect access to the very ideals that our country was founded upon by rewarding those who adhere strictly to legal immigration pathways, local economies, communities and Main Street will pay the price.” Ranking Member Markey’s CRA resolution follows his introduction of the Investing in the American Dream Act alongside Ranking Member Velázquez earlier this year. The Investing in the American Dream Act would roll back the SBA’s draconian lending restrictions and restore previous SBA lending policies for immigrant entrepreneurs lawfully in the U.S., including green card holders, refugees, and asylees. More than 100 organizations have called for the passage of the legislation and more than 60 Massachusetts state legislators have raised concerns about the impact of the citizenship restrictions in their local communities. Ranking Member Markey is fighting for small business owners and immigrants that rely on SBA loans to start and run their businesses, create jobs, and contribute to their communities. In July, Ranking Member Markey and Ranking Member Velázquez introduced a bicameral resolution to rescind the Trump administration’s policy that bans green card holders from accessing essential SBA loans to start and grow their businesses and invest in Main Streets nationwide. In May, Ranking Member Markey highlighted the significant contributions of immigrant entrepreneurs in Massachusetts and across the country and condemned the Trump administration’s repeated attacks on immigrant communities at a Small Business Committee hearing. MIRA’s Elizabeth Sweet, who participated in Ranking Member Markey’s listening session earlier in May, provided testimony at the hearing. Also in May, Ranking Member Markey hosted a listening session at the Urban College of Boston to hear directly from several Massachusetts immigrant small business owners, lenders, and chambers of commerce how President Trump’s cruel and callous anti-immigrant policies are hurting Main Streets in the Bay State. Earlier in May, Ranking Member Markey hosted a press conference alongside Ranking Member Velázquez, Democratic lawmakers, and stakeholders to condemn the Trump administration’s harmful anti-immigrant lending policies and to introduce the Investing in the American Dream Act. In March, Ranking Member Markey released a comprehensive report detailing the harms to small business owners, workers, and consumers caused by the Trump administration’s ICE raids in communities across the country. In February, Ranking Member Markey introduced the Small Business ICE Disruption Fund Act, which would provide grants to small businesses that have been impacted by the Trump administration’s violent immigration enforcement actions on Main Streets across the United States. Earlier in February, Ranking Member Markey, Ranking Member Velázquez, Congressional Black Caucus Chair Yvette Clarke (D-N.Y.), Congressional Hispanic Caucus Chair Adriano Espaillat (D-N.Y.), and Congressional Asian Pacific American Caucus Chair Grace Meng (D-N.Y.) sent a letter urging the SBA to rescind their lending rule change that bars legal permanent residents from receiving SBA loans. Previously, Ranking Members Markey and Velázquez released a statement condemning the actions of the SBA after it announced that small businesses with legal permanent residents will be barred from receiving SBA loans. In December 2025, Ranking Member Markey and all Democratic members of the Senate Small Business Committee sent a letter to the SBA reiterating concerns with the SBA’s citizenship requirements and highlighting a drop in SBA lending volume. In September 2025, Ranking Member Markey heard directly from SBA lenders about the issues with the citizenship verification requirements. In July 2025, Ranking Members Markey and Velázquez sent a letter to the SBA expressing serious concerns with the agency’s new, draconian citizenship verification requirements that require small businesses seeking SBA loans to be 100% owned by U.S. citizens, nationals, and legal permanent residents. ###
New study warns nighttime light exposure may hurt heart health
Hackensack Meridian Medical Group's Dr. Craig Basman warns that too much light during nighttime sleep may damage the heart. He discusses the risks linked to nighttime light exposure and shares tips for better sleep.
Heat hurting your mental and physical health: local psychiatrist says
A psychiatrist explains how extreme heat can worsen mood and depression and why some medications can increase the risk.
Heat hurting your mental and physical health: local psychiatrist says
NBC 5’s Maria Guerrero spoke with a local psychiatrist and North Texans spending time outside in Downtown Dallas.