SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " reserve " 906 found 🔀 AI-powered Shuffle
Dillon Gabriel designated to return
The Browns are getting one of their quarterbacks back from injured reserve.
Science, resource chief for NPS honored with accesibility award
Steven Kidd, chief of Science and Resource Management at Timucuan Ecological and Historic Preserve in Jacksonville, Fla., was recently recognized with the Accessibility Achievement Award by the National Parks Service.
County preserves to host activities at Ryan Woods
The Forest Preserves of Cook County will host the following events at the Dan Ryan Woods, 87th Street and South Western Avenue.
Soldiers Wounded by Iranian Drone Strike Accuse Military Health Care System of Failing Them
Six U.S. Army Reserve soldiers died and more than 30 suffered wounds during the March attack,
Evan Williams praises Jonathan Gannon after Packers’ dramatic win
The Green Bay Packers leaned on their defense to preserve a 17-14 victory over the Tampa Bay Buccaneers on Sunday, with Evan Williams delivering a pair of crucial plays during the closing moments. The safety’s performance on Tampa Bay’s last drive also gave him another reason to admire the work of defensive coordinator Jonathan Gannon. [...]
Brazil: Lessons from a Disaster
By Antonio Martins (Outras Palavras) Defeats become deeper and more prolonged when we misunderstand what caused them, avoid correcting course, and embrace “solutions” that only compound our mistakes. Lula’s government and the Brazilian left suffered a disaster in Sunday’s election. Contrary to every poll, the president finished the first round 2.2 million votes behind Flávio Bolsonaro—and, more significantly, 3.4 million votes below his total four years ago, when the machinery of the state was working against him and in favor of his opponent. His vote share declined in 98 percent of Brazil’s municipalities. The PL, the main party of the far right, elected 121 deputies and 28 senators, becoming the largest caucus in both houses of Congress. The parties aligned with the Centrão—Brazil’s bloc of transactional center-right parties—were somewhat diminished, but will still hold roughly 250 seats in the Chamber of Deputies and 35 in the Senate. That will make it easier to assemble the majorities needed to amend the Constitution or impeach Supreme Federal Court justices. If elected, Flávio Bolsonaro could appoint four members of the Court, substantially altering its internal balance of power. What produced these results? How can the far right be prevented from consolidating them into a prolonged political hegemony? And what is the essential change of direction the left now needs? Explaining the Disaster Across the commercial media and the exuberant chaos of digital platforms, interpretations are multiplying. Some focus on specific episodes: Lula’s absence from the Globo debate, his very close relationship with Alexandre de Moraes, or his emphasis on issues supposedly remote from most people’s everyday concerns, such as rare earth minerals. Among the more systemic interpretations, three seem especially questionable. One argues that the principal defeat was not the left’s, since its congressional representation declined only slightly. The decisive movement captured at the ballot box, according to this view, was a shift within the right itself—from the more moderate and transactional forces of the Centrão toward the more ideological and radicalized forces of the PL and Novo. A second interpretation holds that the nature of electoral and political processes has changed. The material interests and aspirations of society, it argues, no longer play the central role they once did; they have given way to forms of subjective self-identification that the left has yet to understand. And a third concludes that, because of these two developments, we should expect a political winter: a prolonged period in which the far right and the broader right dominate Brazilian political life. There are important elements in all three interpretations. The problem lies in what they deny or leave out: Lula’s third government was a small-bore government. It offered the majorities that elected it neither a clearly better life nor reasons to believe again in politics and its power to transform society. These failures flowed from two fatal accommodations, which I will examine below. As a result, the government suffered a slow but steady erosion of support. And, as has happened in so many Western countries, it gave the far right the opportunity to present itself as anti-system and to benefit from popular frustration and distress. The interpretation that emphasizes the migration of votes from the center-right and traditional right toward the far right has been advanced, among others, by the courageous journalist Leonardo Sakamoto. In his UOL column on Monday, October 5, he highlights the miserable behavior of the traditional conservative parties. Over the past four years, they repeatedly joined forces with the “neo”-fascists, helping to “normalize” them—a criticism that could equally be directed at almost the entire corporate media. Believing they could use the far right as a stepping stone, they instead ended up partly devoured by it. This was especially true in the Senate, where the PL’s gain of 13 senators and Novo’s gain of two came at the expense of the PSD, which lost nine; the MDB, which lost two; the PSDB, which lost two; and the PP, which lost one. Sakamoto’s observation is accurate and necessary, but it leaves uncomfortable questions unanswered. Why did the erosion of the Centrão benefit the far right rather than, for example, producing growth for the left—as has happened so many times before, both in Brazil and elsewhere? The answer is not difficult. Throughout its four years in office, Lula’s third government was almost invariably associated with the Centrão. Here lies its first accommodation: accepting the limits imposed by conservative institutions; avoiding, as much as possible, any attempt to strain those limits through popular pressure; and believing only in the modest changes that could be squeezed through openings in Congress. The failure of the campaign to end the six-day workweek is emblematic. Lula could have electrified the presidential race by pairing it with a popular campaign for passage of the measure. Instead, he chose to place his hopes in the hands of Senate president Rodrigo Alcolumbre. He generated no mass mobilization, did not force his opponents onto an uncomfortable defensive, and won no victory. In September 2025, the government squandered the greatest of its many opportunities to shake up conservative power in Congress. Popular opposition to the so-called Shielding Amendment—which, if approved, would have restricted criminal proceedings against members of Congress—brought crowds into the streets, mobilized primarily by artists and social movements. This opened the possibility for a broader political education: a campaign that could begin exposing the limits and dysfunctions of Brazil’s political system while putting Bolsonaro’s movement on the defensive for its predictable support of political privilege. The amendment was defeated. But the executive branch then backed away from the fight. It remained associated with an institutional world widely seen as corrupt, elitist, and indifferent to ordinary people’s struggles. In doing so, it forfeited its credibility as a vehicle for the protest vote. On Sunday, it reaped the bitter fruits. Are We Doomed? Taking a different approach from Sakamoto, the philosopher Moysés Pinto Neto and other writers have drawn attention, in their first analyses of October 4, to the fragmentation of the public sphere produced by Big Tech platforms. Through their algorithms, these platforms present each person with a different view of social reality. As a consequence, it becomes much harder to identify common material problems and demands—for example, the fight for labor rights or for a properly funded public health system. Voters no longer embrace such demands, these authors argue, because they no longer see themselves as part of a collective. Instead, they tend to value the identities assigned to them by neoliberal subjectivity—the role of the entrepreneur, for example. On this interpretation, the left’s possible error lies in clinging to outdated illusions. Moysés’s warning is highly relevant and resonates with arguments such as Naomi Klein and Astra Taylor’s “Apocalyptic Fascism and the Billionaires’ Bet.” Unlike a century ago, the far right no longer promises a radiant future. It concentrates instead on resentment—especially that of young men. “They belong to a generation that fears it may never own a home, but compensates with the pleasure it gets from constantly provoking progressives online. Convinced their future has been stolen, they share memes romanticizing historical authoritarian regimes,” the authors write. But Moysés seems to confuse this danger with inevitability. He fails to see that the left’s answer cannot be adaptation. On the contrary, it must strengthen the possibility of politics as collective action. Nor does he recognize that precisely such a reversal is already becoming possible in some of the most promising mobilizations of the twenty-first century: the election, at the end of 2025, of the young Muslim Zohran Mamdani as mayor of New York, on a platform centered on the intensely material fight for an affordable city; the Left Party’s victory in Berlin two weeks ago, built around the demand to expropriate private real-estate corporations; and the very recent wave of demonstrations in Spain—including an occupation of Madrid’s Puerta del Sol—in which tens of thousands of young people mobilized by the Tenants’ Union have demanded limits on rents. By putting itself in the straitjacket of the “fiscal framework” in the first months of 2022, Lula’s third government adopted the second fatal accommodation of its term. Faced with conservative institutions and a country devastated by four years of Bolsonaro, increased public investment was the government’s remaining weapon for offering a more dignified life to the majority and forging an anti-conservative pact with them. The same state that disburses 1 trillion reais a year to enrich a small class of rentiers could instead spend money to extend the Family Health Strategy to every Brazilian, at a cost of 30 billion reais; provide full-day public schooling and childcare to all adolescents and children—and, especially, relief to their mothers; achieve universal sanitation while cleaning up polluted urban rivers; multiply metro systems; begin transforming the urban peripheries; and undertake many other urgently needed projects. In April 2023, an article in Outras Palavras warned that the fiscal framework could “shrink the Lula government and preserve the forces that condemn the country to inequality and regression.” A year later, another article showed that restraints on public spending were strangling policies vital to ordinary people and undermining the president’s popularity. In November 2024 came a reality check, in the form of the government’s humiliating defeat in the municipal elections. Even then, the fiscal lock was neither removed nor loosened. On the contrary: throughout the government’s four years, fiscal restraint remained central to its political narrative. The administration proudly proclaimed that it had “put the state’s accounts in order,” without grasping either how misleading that phrase was—given the payment of 1 trillion reais in interest—or how badly the message was hurting it politically. Lula finally woke up in September 2026. The increase in Bolsa Família benefits, after four years of being frozen; the announcement that anti-obesity drugs would be offered through Brazil’s public health system; and the ban on online betting showed that the state has the power to act decisively on behalf of the majority when those in government are willing to confront obstacles. The huge marches that closed the campaign in Fortaleza, Salvador, Rio de Janeiro, and São Paulo on the eve of October 4 showed how such initiatives can mobilize activists and the broader public. But it was too late—and too little to change the outcome of the first round. History has not ended The possibility of a turnaround in the three weeks leading up to November 25 cannot be ruled out. It will not be simple or easy. Lula must not only make up a deficit of 2.2 million votes; he must also offset the movement of voters who backed other right-wing candidates in the first round, most of whom are likely to move toward Flávio Bolsonaro. Pulling that off will require a broad, grassroots effort to win over voters, potentially reinforced by new initiatives from Lula. The coming hours and days will be decisive. If Bolsonaro’s movement also wins the presidency, the result will create a high-risk situation for Brazilian sovereignty and democracy. The enormous challenges posed by such an outcome would require the left to reexamine, in depth and with a genuine willingness to engage in self-criticism, its political projects—or its lack of them—and its practices. But would that mean we are condemned to the long winter of far-right hegemony that some analyses are beginning to forecast? It is far too early to say, suggests a recent text by Álvaro García Linera, the thinker who served as vice president of Bolivia under Evo Morales. His central hypothesis is that this political current will prove short-lived. At a moment when the entire world is once again talking about sovereignty and protecting national economies, the far right offers a stale, recolonizing neoliberalism. Its submission to the United States is as blatant and pathetic as Flávio and Eduardo Bolsonaro’s overtures to Donald Trump. Its project amounts to something like every man for himself: greater inequality, capitalism without limits, devastation, and supremacism. Will it work? In the United States, just two years into his second term, Trump himself is reaching record levels of unpopularity and may be on the verge of losing Republican control of both the House and Senate in November. Every new beginning is difficult. Whatever the outcome of the second round, the defeats of October 4 show how profoundly the Brazilian left will have to rethink and rebuild. But just as it would be foolish to underestimate the seriousness of its mistakes, it would be equally foolish to conclude that rebuilding a political project is no longer possible. History has not ended. The times are moving faster than ever. Originally published in Portuguese by Outras Palavras. English translation by Eric Blanc; I’ve added the subtitles. More We can’t stop the far right at home or abroad without a revitalized labor movement, which is yet another reason why you should become a sustaining supporter of the Emergency Workplace Organizing Committee (EWOC) — one of US labor’s pivotal bright spots. Relatedly, Jacobin published a short piece of mine reflecting on a decade of Bernie Sanders inspiring a whole new generation of young worker organizers.
Data science professor awarded grant to support partnership with Internet Archive, preserve digital history
Alexander Nwala will develop AI models that automatically identify, archive and catalog web resources referenced in U.S. television news in a publicly accessible database.
Could the future “afterlife” be digital rather than spiritual? Science fiction is starting to look plausible
For most of human history, the idea of continuing after death belonged mainly to religion, philosophy and personal belief. Technology is now creating a very different possibility: a version of you that continues speaking, answering questions and interacting with family long after your biological life has ended. This would not be an afterlife in the spiritual sense. Today’s systems cannot preserve consciousness or prove that a person’s mind survives death. What they can increasingly preserve is d
Is it possible to preserve your memories before dying? The science is moving beyond science fiction
For most of history, preserving someone’s memories after death meant relying on photographs, letters, stories and the recollections of other people. Technology is now pushing that idea much further. S...
Is it possible to preserve your memories before dying? The science is moving beyond science fiction
For most of history, preserving someone’s memories after death meant relying on photographs, letters, stories and the recollections of other people. Technology is now pushing that idea much further. Scientists can record parts of brain activity linked to memory, researchers are mapping the neural networks that store experiences, and digital systems can preserve enormous amounts of a person’s voice, writing, images and personal history. That still falls far short of copying a mind. No technology
Tank Bigsby injury: Eagles running back to injured reserve
Philadelphia’s backfield depth is being tested.
Derrick Harmon placed on Injured Reserve
Steelers DT Derrick Harmon placed on IR after Week 4 injury
Packers place former Georgia Bulldogs DL on injured reserve
The Green Bay Packers have suffered several key injuries on defense. Green Bay will be without former Georgia DL Warren Brinson for extended time
Euro pummelled by France's debt burden; stocks mixed
By Rae Wee SINGAPORE, Oct 5 (Reuters) - Asian stocks made brisk gains on Monday as investors pared back expectations of a Federal Reserve rate hike this month, while the
[World Class] Sookmyung bets Hallyu’s next stage is academia, not just entertainment
Behind each university’s global ambitions are choices about what to preserve, what to develop and where to go next. In “World Class,” The Korea Herald interview
Scientists must be trained to work without AI, as well as working ...
As AI and autonomous labs become more capable, human reasoning must be preserved
This mysterious hole on the Moon may open into a giant cave
NASA has selected the GIMLI project to investigate whether the Marius Hill Pit opens into a vast underground cave or lava tube. Using radar, seismic sensors, gravity measurements, and cameras, researchers will search beneath the lunar surface and estimate the size of any hidden void. Such caves could preserve clues to the Moon’s volcanic history and potentially provide protected shelters for future astronauts.
Trump economic advisor says 'it's time' for Powell to leave Fed, calls extended tenure 'unprecedented'
Kevin Hassett says Jerome Powell should leave the Federal Reserve Board, calling his continued presence "completely unprecedented" after his term ended.
Retailers are making returns harder. A carpet seller taught me why that’s a mistake
A standard business practice offsets future costs by funding a reserve for returns – but many small businesses don’t do it
How Americans’ Financial Health Is Faring In The “K-Shaped” Economy
Hey all, Jason here. Money20/20 is still two weeks away, but I’ve already started packing (not procrastinating for once!). My calendar is already filling up with various sessions I want to catch, meetings, and of course happy hours, dinners, and other side events. If you’ll be in Vegas and want to catch up, let me know by replying to this email, and we can try to find a time amidst the chaos of the Venetian. A big if not totally unexpected piece of news dropped on Friday: the Independent Community Bankers of America, a trade group that represents smaller U.S. banks, filed a lawsuit against the OCC and Comptroller Jonathan Gould, arguing that the regulator’s move to grant trust bank charters to firms seeking to use them to conduct substantial non-fiduciary activities exceeds the authorities granted to the OCC by Congress. I haven’t had time to fully digest the legal filing or speak to folks in my network about it, but you can expect to see coverage and analysis on it in next week’s newsletter. Subscribe or Support by Upgrading The NerdCon agenda just dropped. It’s stacked. Partner content: Nubank built an AI-first bank. Chime built its own banking core. Figure and Valon are rebuilding the mortgage stack. At NerdCon, you’ll hear from the people behind those bets: what they chose, what they learned, and what they’re still figuring out. The agenda is live, with leaders from Nubank, Chime, OpenAI, Remitly, Mercury, Figure, Valon and more. Follow the mainstage conversations, bring the problem your team is wrestling with to a hands-on workshop, or pull up a chair at a roundtable. Pick your quests. Meet us in San Diego, November 18–20. Fintech Business Weekly readers save 20% with code FBW20. Explore the Agenda Things To Know & Other Good Reads Federal Reserve Board finalizes changes to enhance the transparency and public accountability of its stress test and reduce volatility in its stress test-related capital requirements (Federal Reserve Board of Governors) FDIC Announces Conclusion of Independent Monitorship (FDIC) Modernizing Financial Regulation: Initial Observations from eSLR (Fed Vice Chair for Supervision Michelle Bowman) The Data Version of Godzilla versus Kong: FRED Takes on AI (Fed Governor Christopher Waller) Financing the AI buildout (Brookings) Q3’26: Rules for Banks but Not for Crypto (Fintech Takes Banking) The Inevitability of Local Stablecoins (Lombard Notes) Delusions of AI Governance: The Human-in-the-Loop Comfort Blanket (Fintech Snark Tank) Stripe agrees to acquire Parafin to expand revenue opportunities for platforms and help small businesses grow (Stripe) Listen: Fighting Fraud in the Age of AI, with SEON’s Tamas Kadar (Fintech Business Weekly) How Americans’ Financial Health Is Faring In The “K-Shaped” Economy If there is one overarching theme across the economy and politics in the U.S. at the moment, it’s “affordability.” The term is vague enough to encompass a panoply of factors shaping Americans’ day-to-day lives: rising costs for the hallmarks of being “middle class,” including healthcare, housing, childcare, and education, inflation and rising interest rates, and a job market with the specter of AI hovering over it. At the same time, policy shifts under the Trump administration have resulted in reduced subsidies to those who get health insurance under the Affordable Care Act and new restrictions on qualifying for Medicaid and SNAP, the impacts of which have yet to be fully felt. These factors are contributing to declining consumer confidence and general dissatisfaction with the economy, despite continuing GDP growth and stock market records. This divergence is encapsulated in the idea of the “K-shaped” economy, in which a small proportion of Americans have seen their wealth balloon, while the majority of American households struggle to preserve the lifestyle they have. Perhaps the greatest determinant of which branch of the “K” a household is on is whether their wealth and income are primarily derived from employment vs. from assets. Nearly two decades of low interest rates and, more recently, elevated rates of inflation have benefited asset owners, while those whose income is primarily or solely derived from labor have largely seen real purchasing power stagnate or decline. This is reflected in recent Bureau of Labor Statistics data showing that labor share of U.S. GDP — the fraction of economic output that accrues to workers as compensation in exchange for their labor — dropped to just 52.8% in Q2 2026, the lowest since the BLS began keeping records. In 1947, approximately 2/3rds of economic output accrued to workers; even as recently as 2001, labor’s share of GDP was 64.1%. Against this backdrop, we’ve seen the rise of more credit and credit-like products: cash advance apps, “no-fee” overdraft, earned wage access, and buy now pay later, which are often used as small-dollar short-term borrowing mechanisms to meet immediate consumption needs or pay other bills (eg utilities, cell phone, other debt payments). With the markers of a middle class existence and, increasingly, basic financial stability seemingly out of reach for many, it should be no surprise there’s been an increase in “financial nihilism,” something industry peers like Alex Johnson and Frank Rotman have discussed and analyzed the roots of. The explosion of gambling and gambling-adjacent products and services — often marketed under the guise of being an “investment” — is inextricably intertwined with the rise of financial nihilism. Crypto, sports betting, and, more recently, prediction markets offer an escape or even hope of sorts, like a contemporary, digital version of a scratch-off lottery ticket, while leaving the overwhelming number of people who use such products worse off. Share of Households That Are Financially “Vulnerable” Ticks Up The Financial Health Network’s 2026 Financial Health Pulse® report adds context on how American households are faring. (I linked to this report in last week’s newsletter, but wanted to take time to further unpack the data in the report this week.) The Financial Health Network publishes the report annually, providing insight into how Americans’ financial circumstances are changing over time. The 2026 report is derived from a survey fielded in April and May 2026. The report leverages survey responses to assess indicators of financial health across spending, saving, borrowing, and planning/protecting and to determine a zero to 100 “FinHealth” score. Those with scores between 0 and 39 are considered “Financially Vulnerable,” consumers with scores ranging between 40 and 79 are defined as “Financially Coping,” and those with scores of 80 to 100 are “Financially Healthy.” The report found that moderate improvements in 2025 were reversed, with the share of respondents considered financially “vulnerable” rebounding to 17%. The longitudinal data reflect the impact of pandemic-era programs, like expanded unemployment, cash stimulus payments, and pauses of federal student loan payments. The positive impacts of those programs, as reflected in the Financial Health Pulse reports, had largely disappeared by 2023. While pandemic-era inflation — to be fair, in part caused by the various support and stimulus measures — had come down from as high as 9% in 2022, it has rebounded since the start of Trump’s second term, with tariffs and energy market disruptions owing to the war in Iran pushing prices back up. Specific indicators in the survey that deteriorated from 2025 to 2026 include the share of respondents spending less than their income over the past 12 months, the share paying all bills on time over the past 12 months, the share that have a manageable amount or no debt, the share that are “moderately” or “very” confident their insurance is adequate to cover them in an emergency, and the share that “somewhat” or “strongly” agree that their household plans ahead financially. Unsurprisingly, lower- and moderate-income households are more likely to struggle to pay their bills on time and have any funds leftover to save. The share of low-income households whose income exceeded their spending dropped from 35% in 2025 to 31% in 2026, while the share of upper-income households whose income exceeded expenses remained unchanged at 63%. Households with student loans or revolving credit card debt reported having “a bit more” or “far more” debt than was manageable at rates far higher than those not carrying these types of debts. The share of those with student loan debt indicating their debt load was too high to manage increased from 50% in 2025 to 55% in 2026, while the share of those with revolving credit card debt saying the same ticked up from 51% in 2025 to 54% in 2026. Households that had student loans were markedly more likely to be financially “coping” or “vulnerable” vs. those without student loans. In 2026, 27% of households with student loans were considered financially vulnerable, a jump of 6% points vs. 2025. Households without student loans saw just a 1% point increase (not statistically significant) in those considered financially vulnerable. Households’ perception of the affordability of categories of goods and services paints a stark picture, with less than one-fourth considering higher education affordable, about a third deeming childcare affordable, and less than half viewing healthcare as affordable. Fintech Business Weekly is made possible by the generous support of paying subscribers — bringing you independent analysis of banking, fintech, and crypto without fear or favor. You can support my work by becoming a paying subscriber if you aren’t already. Paying subscribers enjoy: access to the entire archive of nearly six years of newsletters extended versions of the weekly newsletter, with additional content and analysis and (for founding member tier) quarterly personal 1:1 fintech Q&A / strategy calls with me, tapping into my unparalleled knowledge of the intersection of banking and fintech and experience working in the sector, including helping to launch Goldman Sachs’ retail bank Marcus Support Fintech Business Weekly You can also support Fintech Business Weekly by sponsoring a newsletter or podcast, putting you in front of 93,000+ of the most influential decision makers in banking, fintech, and crypto. Learn more about sponsor opportunities or request a media kit by dropping me an email. Democratic Senate Report Highlights How Iran Uses Tether to Evade U.S. Sanctions Iran uses stablecoins, specifically Tether, to evade sanctions, fund regional proxies, and to purchase military drones, a report released last week by the Senate Permanent Subcommittee on Investigations says. The report was authored by committee ranking member Senator Richard Blumenthal (D-CT) and the minority staff. Crypto and stablecoin proponents will often push back on criticism that criminals make use of these assets by arguing that, on an absolute dollar basis, far more illicit funds flow through traditional banking systems and payment rails than via crypto and stablecoins. And while that is likely true, it elides the reality presented in news story after news story: whether state actors — Russia, Iran, North Korea — or criminal groups, those looking to engage in illicit transactions increasingly favor stablecoins and, specifically, Tether (USDT). The report from the Senate Permanent Subcommittee on Investigations released last week adds context to how Iran uses Tether has a lynchpin in its shadow banking system. The report analyzed 846 wallets that have been sanctioned or targeted for seizure, finding that 84% of them transacted exclusively or primarily in Tether. The ability to create near limitless, anonymous wallets and to move funds effectively instantaneously and irreversibly have made crypto a favored financial mechanism for bad actors. Stablecoins solved key drawbacks of bitcoin, namely, the original cryptocurrency’s highly volatile value in dollars. And while Tether (the company) has the technical ability to “freeze” or destroy funds, the company is often limited and reactive in its approach to doing so, the Senate report argues. Tether, which is nominally based in crypto-friendly El Salvador, “has stated that its compliance with OFAC sanctions is ‘voluntary’ and that it follows ‘OFAC guidelines,’” the Senate report says. Owing to these favorable attributes, Tether “became a primary cryptocurrency for Iran, Hamas, Hizballah, and the Houthis beginning in 2023 and has expanded in scale since,” according to the report. Tether’s role in Iran’s shadow banking system, the report says, is enhanced by crypto exchanges like Bybit, Kyrrex, OKX, Gate, and Binance, and through “over the counter” exchanges and hawala networks. The consequences of these financial flows aren’t hypothetical. The Senate report links Tether as a funds transfer mechanism to Iranian proxies in the region, including Hizballah, the Houthis, and Hamas. Tether has also been used to make payments to secure components necessary to manufacture drones, the report says. The report concludes by arguing that “[s]tablecoin issuers with a significant nexus to the United States, particularly those that offer dollar-denominated stablecoins, should be subject to American sanctions law rather than being allowed to hide behind foreign jurisdictions.” Stablecoin issuers like Tether must be held accountable for repeated failures to prevent illicit finance and sanctions violations by law enforcement, the Department of Justice, the Securities and Exchange Commission, and OFAC, the report argues. [Paying Subscriber Exclusive] OUSD Goes Live, Make Your Own Neobank, U.S. Sanctions Russia’s A7 Network As “Transnational Criminal Organization” OpenUSD, the stablecoin issued by the Open Standard consortium that includes Stripe, Visa, Mastercard, core providers, crypto firms, and numerous banks, went live last week. Social commerce platform Whop raised eyebrows in fintech by offering creators on its platform the ability to launch their own neobanks, which the company describes as “great businesses that are easy to run,” in just 15 minutes. And OFAC and FinCEN target Russia’s “shadow banking” A7 Network — more on these stories after the paywall.
Hawai’i Small Businesses urged to complete Federal Reserve Credit Survey by Nov. 13
The Department of Business, Economic Development and Tourism is encouraging Hawai‘i small businesses to take part in the Federal Reserve’s 2026 Small Business Credit Survey, now open through Nov. 13.
Seahawks place rookie RB Jadarian Price on Injured Reserve
A brutal setback for Seattle's top pick from the 2026 NFL draft
Warren Brinson on Injured Reserve
Packers DT Warren Brinson placed on IR because of injuries
Chang’e-6 lunar soil contains a surprising magnetic time capsule
Scientists studying Chang’e-6 lunar soil have discovered a previously unknown magnetic mineral in natural Moon samples: a form of metallic iron called γ-Fe. Found inside tiny impact-glass particles, the nanoscale iron can preserve a stable magnetic signal, potentially acting like a microscopic fossil of the Moon’s long-lost magnetic field.
Vote no on Prop 45 to Protect California’s environment and public health
This November, California voters will have a chance to push back against President Trump’s attacks on our clean air and water, public health, and open space by voting NO on Proposition 45. This deceptive ballot initiative is a 41-page recipe for pollution and sprawl. It would weaken California’s bedrock environmental law and make it easier to build data centers, warehouses and other polluting projects – with severely limited public oversight.
Sacred pages of 1,000-year-old gospel reveal ancient DNA scientists never expected
1,000-year-old manuscript found to have traces of ancient virus DNA preserved in its parchment pages.
Sacred pages of 1,000-year-old gospel reveal ancient DNA scientists never expected
1,000-year-old manuscript found to have traces of ancient virus DNA preserved in its parchment pages.
Sacred pages of 1,000-year-old gospel reveal ancient DNA scientists never expected
1,000-year-old manuscript found to have traces of ancient virus DNA preserved in its parchment pages.
Mars’ North Polar Ice Is Much Cleaner Than Scientists Thought
Beneath the dusty surface of Mars’ north pole, scientists have uncovered surprisingly clean layers of ice that may preserve a hidden record of the planet’s dramatic climate history. Earth maintains a relatively steady posture in space thanks to the gravitational anchor of a massive moon. Mars lacks that stability. Tugged only by two tiny moons,
That Rare Mastodon Fossil Found in San Mateo Is Now at Stanford
The molar dates back to the Ice Age. Researchers found it submerged in a Bay Area creek at the Midpeninsula Regional Open Space Preserve.
Scientists Discover New Dinosaur Species from Remarkably Complete Fossil — and Its Feathers Are Still Preserved
The 22-inch dinosaur lived more than 100 million years ago, and its complete skeleton and preserved feathers are offering new clues about how flight evolved
Panthers defense looks to slow down Jared Goff and the Lions
The Carolina Panthers are preparing to face the Detroit Lions without both starting cornerbacks, who are on injured reserve.
In brief: 'Reacher' spinoff gets a second season and more
We’ve got an official trailer for NBC’s Newlyweds, the new sitcom starring real-life married couple Tim Daly and Téa Leoni. The show, co-created by Jamie Lee Curtis, follows a later-in-life love story between a free-spirited woman and a professor who marry after a quick courtship. It premieres on Oct. 23 …The Reacher spinoff Neagley is getting a second season, just two weeks after the first season debuted on Prime Video. Maria Sten stars as the fan-favorite character Frances Neagley, a private investigator from Chicago and the former protégé of Jack Reacher, in the action series. The original Reacher series, starring Alan Ritchson, was picked up for a sixth season earlier this week … TNCMS.AdManager.render({region: 'fixed-big-ad-top-asset', slot: 1, fold: "above"}); Bradley Cooper is gearing up to star in Paramount’s new G.I. Joe film. He’ll be playing Duke, the leader of the Joes. Danny McBride is on board to direct. Further details on the project have not yet been revealed …Copyright © 2026, ABC Audio. All rights reserved. Thank you for reading kmaland.comAt KMA, we attempt to be accurate in our reporting. If you see a typo or mistake in a story, please contact us by emailing kmaradio@kmaland.com.
Trump pushes Europe to release diesel reserves
United Refining Company Chairman and CEO John Catsimatidis discusses high gas and diesel prices. Catsimatidis also weighs in on NYC Mayor Mamdani marketing New York City to businesses.
Travis Etienne Jr. placed on Injured Reserve
Saints RB Travis Etienne Jr. on Injured Reserve because of hamstring injury
Saints lose $47M free agent acquisition to injured reserve
Another cornerstone of the New Orleans Saints offense is going on injured reserve. Travis Etienne Jr. must miss at least the next four weeks.
How are higher interest rates and rising prices affecting you?
Last month, the Federal Reserve raised interest rates for the first time in more than three years, as it tries to bring inflation under control. But higher rates make borrowing more expensive for consumers and businesses — one reason mortgage rates have climbed to a three-year high in recent weeks.
Island Science Day is Saturday at UTMSI
All ages are invited to celebrate 85 years of research and education at the University of Texas Marine Science Institute and 20 years of the Mission-Aransas National Estuarine Research Reserve on Saturday, Oct. 3. Island Science Day will be from 10 a.m. to 2 p.m. at the Patton Center for Marine Science Education, 855 E.
Report: Jamal Shead, Raptors agree to three-year, $24 million contract extension
The former second-round pick turned critical reserve has earned a spot in Toronto's plans for years to come.
Matt LaFleur Makes Admission on Learning Saddening Packers Development
For the second season in a row, Green Bay Packers wide receiver Jayden Reed is going to miss a lot of time due to an injury. And this time around, he will be out for the remainder of the season after being placed on the injured reserve with a neck injury. The former Michigan State […] The post Matt LaFleur Makes Admission on Learning Saddening Packers Development appeared first on Gridiron Heroics.
Bodies
your look inside the human body starts here. Bodies – the science within brings real human specimens, carefully and respectfully preserved, to Sacramento memorial auditorium, giving visitors …
Jalen McMillan placed on IR
Buccaneers WR Jalen McMillan placed on Injured Reserve with knee injury
The final verdict is in for the Fed's troubled renovation and Jerome Powell
The Federal Reserve's inspector general released its findings from an investigation into the cost overruns in a Fed renovation project, finding no administrative misconduct.
Panthers place both starting cornerbacks on injured reserve
The Panthers are down both starting cornerbacks for at least four weeks.
Powell did not break the law with expensive Fed renovations that incensed Trump, report finds
An inspector general review of the Federal Reserve’s headquarters renovation found no sign that then-Chair Jerome Powell broke the law or committed misconduct in his management of the costly project, even as it sharply criticized him and the bank’s board for allowing the price tag to balloon beyond $2 billion.
Detroit Lions Catch Massive DOUBLE BREAK vs. Panthers
The Carolina Panthers placed Jaycee Horn and Mike Jackson Jr. on injured reserve ahead of Sunday's Week 4 matchup against the Detroit Lions.
Fed's favored inflation gauge cooled in August but remained elevated
The Commerce Department reported that PCE inflation remained elevated in August at a level well above the Federal Reserve's 2% target.
Silage science
Silage can be created from nearly any forage crop, but corn is often used because it is so energy-dense. Putting up silage can preserve forage quality via fermentation if it
Touchdown machine Cody White promoted to 53-man roster
Wide receiver signed with Jack Bech going on injured reserve
Patriots place veteran guard Greg Van Roten on injured reserve
Greg Van Roten made his 106th NFL start in Week 3 at EverBank Stadium.
The Family Business Advantage: Third Quarterly Power Breakfast of 2026 explores how family businesses balance legacy and innovation
Photo by GFBJAnother successful Power Breakfast is in the books. The Greater Fayetteville Business Journal hosted its third quarterly Power Breakfast of 2026 on Tuesday, Sept. 29. Local leaders and decision-makers gathered to network and learn from the panel about how established principles drive long-term stability while allowing for operational evolution. The panel featured Managing Partner of Luigi’s Italian Chophouse & Bar, Nate Ernst; Inside Sales at Hubbard Supplyhouse, Mary Grace Hurley; Chief Operations Officer for Copiers Plus, Drew Smith; and CEO of Holmes Security Systems, Stephen Wheeler. The panel was moderated by Lauren Willets, director of the Family Enterprise Center at UNC’s Kenan-Flagler Business School. Throughout the discussion, the panelists returned to a common idea: family businesses thrive when they preserve the relationships and values at their core while remaining open to change.Each panelist shared personal stories that carried practical lessons. Stephen Wheeler emphasized the role of relationships with customers and employees, saying, “What makes a family business successful today is relationships.” Mary Grace Hurley echoed Wheeler’s sentiment, describing relationships as a lasting inheritance, including a customer connection that began when she was young and continued into her working life. “If something’s given to you, that’s going to cost you too,” added Nate Ernst. He explained this philosophy by sharing that, in his view, earning responsibility builds credibility and confidence.Another hot topic was the idea of tradition versus change. For these businesses that have been around for a century or even more, it can be difficult to escape the “we’ve always done it this way” caveat, but these speakers emphasized how change has been an integral part of their growth and longevity. A family business can honor its history without being bound by it.“Innovation and tradition–they don’t have to be competing with one another,” shared Hurley. She pointed to changes in how businesses operate, including the adoption of computers and new management practices. Ernst stressed that adaptation is essential, while Wheeler described how his family’s electrical contracting business had evolved into a security-focused company. The details of the work may change, but identifying and upholding core values is key to embracing change while maintaining the character of a business. “I think it’s just important to remember why you started in the first place. What was your mission? What are your core values? And to reevaluate those,” shared Drew Smith.In addition to the first-hand accounts and wisdom shared by panelists, Moderator Lauren Willets recommended two novels during the panel for those seeking additional educational resources. Those two novels are “Hug of War: How to Lead a Family Business with both Love and Logic”by Cathy Carroll and “In the Company of Family: How to Thrive When Business Is Personal” by Melissa Mitchell-Blitch. Preparing the next generation requires more than handing over a title or company. Wheeler argued that future leaders need genuine passion and a vested interest in the business. The panelists were in agreement that succession is a process, and there is not one clear answer for how to perfectly prepare for it. Leaders must cultivate readiness, keep communication open and make room for the next generation to earn responsibility while being sure not to neglect the business in the here and now. “Today’s Power Breakfast was one of our best events yet! Between the passion and in-depth knowledge of the panelists, the great audience questions and the guidance and expertise of Mrs. Willets, the conversation was both engaging and informative,” shared GFBJ Publisher Faith Hatton. “A lot of small businesses in Fayetteville are family-owned and grown, and it’s great to be able to spotlight some of the businesses that have stood the test of time by strengthening the next generation of leadership and preparing them for ownership. I hope everyone received some inspiration and ideas that they can bring back to their own businesses and organizations!”We thank everyone who attended this Power Breakfast and hope you’ll all join us for the next Power Breakfast on Dec. 8. Details about the event will be shared on our social media and in future email updates. To learn about becoming a Power Breakfast sponsor, contact the Greater Fayetteville Business Journal at 910.240.9697 or marketing@bizfayetteville.com.
Tiny Grains From Asteroid Bennu Reveal How Jupiter Shaped the Early Solar System
The asteroid’s dust may preserve a record of how planets assembled 4.5 billion years ago.
Remarkably preserved feathered dinosaur discovered in China reveals new secrets of flying predator evolution
A newly discovered feathered dinosaur named Norellraptor barsboldi had sharply curved teeth and claws, as well as four wings, and it adds evidence to the idea that flight evolved several times in different dinosaur groups.
Black politics needs more than better voting maps
The modern voting rights movement has become a tool to preserve the Black politician’s job, particularly the establishment Democrat.
The Beclowning of Scott Bessent
One iron law of current politics is that nobody who associates themselves with Donald Trump emerges with a shred of credibility. For some, that’s not a big loss — it’s not as if anyone respected Pete Hegseth even before he decided that the key to military success in an age of drones and AI was more testosterone. For others, however, the costs are real. I’m old enough to remember when Marco Rubio was widely considered a reasonable, thoughtful politician. Right now, however, my candidate for the biggest loser is Scott Bessent, the Secretary of the Treasury. Bessent started out with significant reputation to lose: When Trump selected him, this was the headline in the Financial Times: Jason Furman, Barack Obama’s chief economist, described him as a “credible Treasury secretary who has a real understanding of the global economy”. But Bessent has now transformed himself into the Baghdad Bob of bonds. Three weeks ago, after intervening (for reasons that remain somewhat unclear) to support the Japanese yen, Bessent boasted about his ability to move markets and dared investors to bet against his, declaring “I am the house now.” He then tried to push long-term interest rates down, buying 30-year U.S. Treasuries in a move some have compared to paying down part of your mortgage by running up your credit card balance. Here’s how that’s going so far: To get some perspective on how high interest rates have gone, here’s a longer-term perspective: We haven’t seen interest rates this high since the fading days of the dotcom bubble. Why are interest rates hitting new records? The backdrop, as I argued in last Sunday’s primer, is the huge AI-driven investment boom; more on that next week. But the immediate cause of the latest interest rate spike was Trump’s rejection of an Iranian proposal to end the war. This rejection sent crude oil prices, which for a while had fallen considerably, shooting back up: It’s notable, by the way, that oil prices remain high even though a significant amount of oil is now being shuttled through the Strait of Hormuz by night, on smaller vessels. That’s an interesting story, which has a lot to do with the fact that oil from the Hormuz shuttle runs must be transferred to larger vessels before being shipped to markets in Europe and Asia; around 15 percent of the world’s large crude carriers are now parked off the coast of Oman, waiting to be tanked up. This is creating a shipping crunch: But that’s a topic for another day. For now, the point is that with oil still high and refined products, especially diesel, still close to record levels, inflation will remain elevated. And this in turn means that the Federal Reserve will keep short-term interest rates high, an expectation that is feeding into longer-term rates. Hence Bessent’s bond-market humiliation. The truth is that Bessent might not have been able to get interest rates down even in the best of circumstances. But he certainly won’t get anywhere as long as Trump keeps believing that he can somehow convert his Iran debacle into a triumphant victory. And Trump will keep believing that as long as he is surrounded by sycophants who tell him what he wants to hear. Sycophants like, for example, Scott Bessent, who is predicting the imminent collapse of the Iranian economy, possibly within two weeks. Bessent is right to say that the embargo on Iranian oil exports is placing the country under great economic strain. But his implicit prediction that this will quickly produce a deal that Trump can call victory looks no more plausible than his boasts about the bond market. The big question now is, why would anyone with a reputation to lose work for Donald Trump? As the beclowning of Bessent shows, joining the Trump team won’t just damage your reputation; it will utterly destroy it.
Bioblitz: Lakeshore Nature Preserve utilizes citizen science to document biodiversity
The University of Wisconsin Lakeshore Nature Preserve hosted its second annual Bioblitz event Sept. 26. The goal of the event was to document as many species at the preserve as possible over a 15-hour period, according to Lakeshore Nature Preserve Director Brad Herrick. With this documentation of everything within the 300-acre area, the preserve aims...
October 1 Vallejo/Vacaville Arts-Entertainment Source: Activities
Vallejo Hike Club’s Morning Hike is set for Friday at 7 a.m., at Mare Island Shoreline Heritage Preserve, 167 O’Hara Court, Vallejo.
In brief: '9 to 5' headed back to theaters and more
Pour yourself a cup of ambition and head out to your local movie theater. 9 to 5 is headed back to movie theaters for a special, weeklong run starting on Oct. 9. This will be a newly restored version of the classic satirical workplace comedy starring the late Dolly Parton. Additionally, Disney is set to donate net proceeds from each ticket purchased for the rerelease in the U.S. to the Dollywood Foundation in support of its flagship program, Dolly Parton’s Imagination Library. Disney is the parent company of ABC News ...Off Campus star Ella Bright has found her next gig. The actress confirmed she will star opposite Mason Thames in the movie Narcs in a post shared to her Instagram Story. This marks Bright's first major studio feature role. The upcoming coming-of-age comedy will be made for Sony Pictures. While the movie's plot is being kept under wraps, it will serve as the directorial debut of John Phillips, the writer of No Hard Feelings, Good Boys and Dirty Grandpa ... TNCMS.AdManager.render({region: 'fixed-big-ad-top-asset', slot: 1, fold: "above"}); Did you miss Evil Dead Burn in theaters? Not to worry. The film is set to make its global streaming debut on HBO Max on Oct. 2. Souheila Yacoub, Tandi Wright, Hunter Doohan, Luciane Buchanan, Erroll Shand and Maude Davey star in the film that was directed by Sébastien Vaniček ...Copyright © 2026, ABC Audio. All rights reserved. Thank you for reading kmaland.comAt KMA, we attempt to be accurate in our reporting. If you see a typo or mistake in a story, please contact us by emailing kmaradio@kmaland.com.
Pens Points: Opening night nears
Here are your Pens Points for this Monday morning… The Penguins assigned Bill Zonnon, Harrison Brunicke and Joel Blomqvist to Wilkes-Barre/Scranton on Sunday and placed Blake Lizotte, Ben Kindel, Justin Brazeau and Ryan Graves on injured reserve. Pittsburgh must make at least two more roster moves before Monday’s deadline to reach the 23-player limit. [PensBurgh] […]
Dallas Fed gives updates on manufacturing, service and energy sectors
This week's business events include reports from the Federal Reserve Bank of Dallas on some of state's biggest industries.
Trump's Greenland obsession isn’t random. Here’s what’s at stake
Greenland's untapped rare earth minerals, oil and gas reserves could reshape U.S. energy security as Trump's Denmark deal expands military presence.
Broncos Place Promising Rookie Running Back on Injured Reserve
Broncos rookie running back Jonah Coleman is headed to injured reserve with a high-ankle sprain after his breakout performance against Jacksonville.
Colts' Alec Pierce Officially Lands On IR, Replaced On Roster
The Indianapolis Colts placed wide receiver Alec Pierce on injured reserve on Saturday, replacing his roster spot with another receiver from the practice squad.
Detroit Lions Shake Up Roster Before Week 3 Game
The Detroit Lions placed Thomas Harper on injured reserve and elevated Jalen Mills and Amen Ogbongbemiga for Sunday’s game against the Jets.
P.J. Locke placed on IR Saturday
Cowboys S P.J. Locke on Injured Reserve with foot injury
Deonte Banks’ injury could leave the Giants thin at corner
The Giants already placed cornerback Paulson Adebo on injured reserve. Now Deonte Banks is questionable for Sunday’s game against Tennessee […]
How educational institutions should operate during power outages — the Ministry of Education and Science has issued recommendations
УНН Society ✎ The Ministry of Education and Science recommends that educational institutions maintain resource reserves, backup power, and shelters ready for use fo…
Intel Panther Lake Teardown, 18A, BSPD, GAAFET, SemiAnalysis STEEL
Panther Lake debuts the first commercial implementation of backside power delivery (BSPDN), introduces Intel’s first iteration of gate-all-around (GAA) transistors, and showcases their advanced packaging capabilities with its Foveros-S assembly. With Panther Lake, Intel’s manufacturing arc has shifted from nebulous roadmaps to shipped silicon, a significant milestone on their long road back to competitive semiconductor manufacturing. To evaluate the extent of Intel’s comeback, we tore down Panther Lake. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Our teardown traces 18A from its four-sheet RibbonFETs (Intel’s marketing name for GAAFETs) and gate stacks through contacts, frontside and backside wiring, and the bonded carrier. We explain how these material and integration choices improve gate control and reduce resistance, while adding capacitance, thermal resistance, and process complexity. Our measurements put Panther Lake’s 18A compute logic and TSMC N3E GPU logic at similar logic density. However, 18A does not lead TSMC N3P, N2 or Samsung SF2 in peak density. Panther Lake’s CPU cores are incremental updates, and the high-end GPU still uses TSMC N3E. Panther Lake assembles one compute tile, one GPU tile, and one I/O tile atop a passive base tile using Intel’s Foveros-S advanced packaging. Both compute tile variants use Intel 18A. The Xe3 GPU options are a 4-core GT1 tile on Intel 3 and a larger 12-core GT2 tile on TSMC N3E. Both I/O tile variants use TSMC N6. [1], [2] Our analysis centers on the PTL-U compute tile, both the 4-core and 12-core GPU tiles, as well as the 12-lane I/O tile. In conventional chips, power and signal are routed through the same frontside metal stack towards the device frontend. Power rails consume scarce routing resources near the transistors, while tall via stacks carry VDD and VSS from the coarse upper wires to local rails. Backside power delivery (BSPD) moves the main power network behind the transistor layer, to the backside, separating it from frontside signal routing. We covered BSPD and its impacts in 2024. [3], [4], [5] Intel’s BSPD implementation, branded as “PowerVia”, routes power through dedicated backside metals to nano-TSVs, which connect those rails to local source/drain (S/D) contacts. Implementing that separation requires Intel to build the interconnect stacks from both sides of the wafer. The frontside comprises the M0-M14 signal stack, while the backside comprises the BM0-BM5 power stack. M0 and BM0 are closest to the transistors. The nano-TSVs connect the two sides, but Intel patterns and etches each via from the front after forming the contacts. A narrow via runs from the side of the contact deep into the silicon substrate. Intel then completes the frontside signal metal stack, bonds the wafer to a carrier, flips it and removes the original substrate until the buried via tips are exposed. The backside metal stack is then deposited directly on the revealed vias. The nano-TSV and backside-via profiles taper in opposite directions because Intel forms them from opposite sides of the wafer. The transistor structures form the FEOL. Local contacts and nano-TSVs connect them to the wiring. M0 begins the frontside interconnect stack. The silicon carrier remains attached above the frontside interconnects. It supports the device wafer during substrate removal and backside processing and remains part of the finished chip’s thermal path. PowerVia removes the main power distribution from the congested frontside metals, routing supply through shorter and wider backside wires. Its lateral landing still occupies area in the standard cell, so it recovers less cell area than a direct backside contact. [3] Nano-TSVs beside the logic devices carry VDD or VSS from the backside power network, while signal connections continue upward through the frontside metals. Backside Interconnects Samsung SF2 data is included for comparison to Panther Lake’s within this article. SF2 is the incumbent GAA foundry node but lacks BSPD, serving as a useful reference to evaluate 18A. A full teardown of Samsung’s S26 products, processed on SF2, will be shared soon.Nanosheet-cut EDS comparison. The PowerVia supply path runs from the backside Cu rails through Mo-lined W nano-TSVs to the local transistor contacts. In this cross section, the tapered connection spans roughly 150 nm from the contact level to BM0. The Ta liner confines Cu and promotes adhesion to the surrounding stack; the AlOₓ etch stop controls the next dielectric etch above the rail. Dielectric beneath the ribbons electrically separates the devices from the backside wiring and removes the conducting silicon body below the channel. [6] AlOₓ serves as an etchstop (ES), enabling endpointing and protecting the underlying layers. Low-volatility aluminum fluoride reaction products resist the fluorinated plasma, allowing a thin AlOₓ film to protect the metal while the surrounding low-k dielectric is removed. [6], [7]. While the BM0 and layers above the M1 lines show double AlOx layers, Our SMIC N+3 teardown showed single AlOₓ layers. SMIC uses a simpler local AlOₓ substack, while the remaining cap and etch sequence provide the required landing protection. So why double layers? The closely spaced AlOₓ doublets provide two protected endpoints in the etch sequence. Intel documents an AlOₓ/SiN/AlOₓ stack that explains the benefit. The main dielectric plasma etch stops on the first AlOₓ film; a selective wet clear opens that film; a second plasma etch removes the intermediate SiN and stops on the second AlOₓ film. The final wet clear exposes the metal landing surface. SiN is the intermediate dielectric in Intel’s published example. [8] The second stop protects the metal through a cap breakthrough. Wide openings can etch faster than narrow ones, and etch depth varies across the wafer. Metal under an early-clearing opening would otherwise be exposed while other openings still need more etching. Staged protection widens the process window and reduces metal erosion, corrosion and void formation. [8] TSMC documents AlN/AlOₓ/SiOC/AlOₓ above Cu, with AlN blocking Cu diffusion, and a simpler AlN/SiOC/AlOₓ variant that omits one AlOx film. [9] Levels with different opening sizes, aspect ratios, pattern densities and cap materials need different etch margins. A double AlOx stop is useful where another protected endpoint justifies the added processing. The extra film adds formation, selective opening and cleaning steps, plus another set of interfaces to control adhesion, moisture, and stress. These blanket films are opened through the existing via pattern, so each film does not require another lithography mask. AlOₓ adds parasitic capacitance when it replaces lower-k dielectric; two thin AlOₓ films can nevertheless contain less AlOₓ than one thick film. Total thickness, placement, and theintermediate dielectric determine the electrical cost. Deposition chemistry also changes AlOx permittivity and residual hydroxyl content, which can oxidize the underlying metal. [7], [8], [10], [11] The backside stack separates into relatively fine BM0-BM2 wiring near the devices and coarser BM3-BM5 power distribution. The largest pitch increase occurs between BM2 and BM3. BM0’s pitch closely matches the logic-row height, fitting local power delivery to the cell rows. Higher levels aggregate current through larger conductors: routing density becomes less important than low resistance and current capacity as the network approaches the package. This hierarchy provides wide power wiring for the power delivery network without consuming scarce frontside signal-routing resources. [3] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Frontside Interconnects Intel 18A combines Mo-lined W contacts and nano-TSVs with a separate backside Cu power network. Samsung SF2 keeps power on the frontside, using Ti-based contact interfaces and Ta-based barriers and Co liners around Cu wiring. In 18A standard-cell rows, backside power rails supply the devices through nano-TSVs within the cells, freeing frontside routing resources. Samsung’s M0 accommodates both power and signal connections. From the device toward M0, the connection runs through a Ti-based S/D interface, W contact fill, a Mo-lined W via, and the Cu M0 wire. Mo supplies a conductive nucleation and adhesion layer for W, replacing the resistive TiN liner used in conventional W integration. This increases the effective conduction volume within the feature while retaining W fill and its established polishing, cleaning and etching processes. Intel’s Mo/W patent describes this integration tradeoff. The nano-TSV uses the same Mo-lined W construction in the backside supply path. [12] The move from TiN to Mo is an incremental change. While a full Co or Mo fill can also reduce the volume lost to liners in very small features, it requires new integration schemes that increase complexity and risk. Cu remains attractive for wider wires due to its low resistance. As wires and vias shrink, the diffusion barrier consumes an increasing fraction of their cross-section. [12], [12], [14] Intel uses Co/Ru liners at M0-M1, Co at M2-M4, and Nb at M5-M9. The lower-level liners help Cu adhere and reduce void formation during trench fills. Applied Materials’ Endura has new thermal control that facilitate wetting process, so the thin film continuity is good enough that good capillary pressure will drive Cu atoms to the via bottom without voiding. Intel’s choice to use Nb is particularly interesting. Intel’s Nb patent describes a conductive diffusion barrier intended to reduce the barrier’s contribution to resistance relative to conventional Ta-based barriers, particularly at via bottoms where all current crosses the barrier. The patent pairs Nb in coarser levels with the option of lower-cost PVD processing. [15], [16] The upper metal layers support thicker barriers formed through physical vapor deposition (PVD) despite its worse coverage and uniformity. Meanwhile, the lower metal layers require thinner barriers deposited through conformal atomic layer deposition (ALD). Co/Ru adds another material interface and requires controlled deposition and Cu fill. Changing liners and barriers by metal layer allows Intel to optimize interconnect resistance, process complexity, and reliability. [15, 16] RibbonFET, Intel’s name for its gate-all-around FETs (GAAFETs), replaces the FinFET’s vertical fins with four stacked horizontal silicon nanosheets, allowing the gate to surround the channel on every side. The path to GAAFET begins with the planar transistor. A planar MOSFET places the gate above the channel between its source and drain. Pairing an NMOS with a PMOS transistor creates a CMOS inverter, in which the NMOS pulls the output low for a high input, and the PMOS pulls it high for a low input. The gate must retain electrostatic control of the channel to ensure clean switching. As gate lengths shrank, the drain began to compete with the gate for that control, increasing off-state leakage. Electrostatic control was restored through an architectural evolution that raised the channel into a vertical fin and wrapping the gate around three sides. Called “FinFET”, this new architecture packed more effective channel width into a smaller footprint. Further scaling made it harder to maintain both drive current and leakage within smaller cells, and reintroduced the same problems planar MOSFETs faced. Nanosheet GAAFETs close the fourth side by replacing the vertical fin with a stack of horizontal nanosheets, each surrounded by the gate. The tighter electrostatic control suppresses leakage at shorter gate lengths while stacking adds effective channel width within the cell footprint. In a FinFET process, channel width changes in discrete steps as designers must add or remove whole fins. Nanosheet width can instead be adjusted continuously within the process’s design rules. Wider sheets increase drive current, while narrower sheets reduce capacitance at the cost of drive current. Intel 18A uses stacks of four nanosheets each and varies their widths across logic and SRAM. At the process level, adding more sheets to each stack increases effective channel width and drive current, but complicates fabrication. RibbonFET vs MBCFET Samsung began GAAFET production in 2022 with SF3E, following with SF3 and now SF2. Its ‘MBCFET’ provides a useful structural comparison with Intel’s first RibbonFET implementation. [17] STEEL is digging deeper into SF2, used in the Exynos 2600, and TSMC’s GAAFET N2, used in Apple’s A20 Pro, in upcoming newsletter articles. We’re throwing some teasers on X. Let’s compare Samsung SF2’s MBCFET with Intel 18A’s RibbonFET. Subscribe Even to the untrained eye, Intel’s extra nanosheet is obvious. Intel stacks four ribbons to Samsung’s three. Samsung’s sheets are much wider in these fields, so both sheet count and width matter to the available channel perimeter. Sheet width also changes which silicon surfaces carry current. On conventional (001) silicon, wide nanosheets emphasize the broad top and bottom surfaces, favoring electron transport; the larger sidewall contribution in a narrow sheet favors hole transport. Thinner sheets improve gate control but increase confinement and scattering. This makes width and thickness part of the NMOS/PMOS balance, alongside strain and threshold voltage. [18], [19] GAAFET designs like 18A use different work-function-metal (WFM) stacks for NMOS and PMOS. Around each ribbon, a thin SiOx interfacial layer separates the silicon channel from the HfOx high-k dielectric, with La providing dipole tuning and the WFM wrapping the dielectric. NMOS uses a TiAl-based stack, while PMOS uses TiN WFM. W fills the remaining gate trench, providing a lower-resistivity path where the work-function layers are no longer needed. In this field, the PMOS stacks leave room for W between ribbons, while the NMOS stacks occupy more of those gaps. A silicon-based dielectric marks the P/N boundary, allowing the PMOS and NMOS gates, sharing the same gate trench, to be processed sequentially. Fast logic paths, retention circuits, and SRAM need a family of threshold options. Changing threshold without substantially changing device dimensions, capacitance or fabrication complexity is valuable. FinFET processes typically use different work-function-metal stacks. In a four-ribbon GAA stack, the narrow sheet-to-sheet gap limits how much WFM can fit around each channel. La in the gate dielectric creates interfacial dipoles at the SiOx/HfOx boundary, shifting effective work function and tuning threshold voltage. This gives Intel another control alongside its NMOS and PMOS WFM stacks. Low-threshold devices improve critical-path drive; higher thresholds reduce leakage elsewhere. Dipole tuning is especially useful in GAA because it changes threshold without consuming the narrow intersheet gap with thicker WFM. Precise control of La incorporation, diffusion and interface quality has long been a challenge, limiting viability in high volume production but is now seen from every leading-edge foundry. Intel’s patent describes depositing a dipole-forming oxide above HfOx and annealing it toward the interfacial oxide before completing the work-function and fill metals. This separates threshold tuning from the space available for metal. Newer research addresses the thermal cost: imec’s 2026 dipole-middle research inserts the shifter between two HfOx depositions, shortening the diffusion path while protecting SiOx during patterning. [20], [21]Matched-cut EDS, Intel 18A (left) vs. Samsung SF2 (right). Intel retains raised source/drain epi beneath its contacts, while Samsung recesses W deep into the epi to form a V-shaped Ti-lined interface. The deeper contact increases metal-to-semiconductor area and shortens the current path from the lower sheets, reducing contact and spreading resistance. It also removes epi volume and brings the contact etch closer to the channel ends. Retaining more epi preserves the material available for strain transfer, especially from SiGe into PMOS. These geometries balance contact access against stress engineering and etch margin. [22], [23] Samsung stacks three sheets to Intel’s four ribbons, and both processes use sheet width to tune drive strength. In our Samsung cross-sections, widths range roughly from 19 to 30 nm in the NPU rows and 37 to 50 nm in the CU cell. The Samsung nanosheets taper, with the widest sheet at the bottom and the narrowest at the top. Both processes use HfOx gate dielectric and Ti-based work-function stacks, with Al in the NMOS stack. In the Samsung devices shown here, the dielectric and WFM occupy the intersheet gaps, leaving W above the top sheet. Intel’s PMOS stack leaves more room between ribbons, and W fills those gaps while the thicker NMOS stack leaves W mainly in the upper trench. Gate-stack EDS maps. The W between Intel’s PMOS ribbons provides a conductive path close to the lower gates. Where WFM fills the entire gap, the gate still surrounds the channel, but voltage reaches it through the more resistive work-function films. Thinner WFM and dipole tuning preserve room for low-resistivity fill; Mo and Ru are alternative fill metals being developed for further scaling. [24] A masked, sequential WFM flow explains the different gate heights and inter-nanosheet fill. The proposed sequence below shows how separate NMOS and PMOS work-function steps produce that geometry. Enabled by the BSPDN process, Intel replaces the dense-logic silicon subfin with dielectric, removing the parasitic conduction path below the ribbons and reducing substrate-related capacitance. A retained silicon body as in classical, non-SOI, planar and FinFET designs needs junction and punchthrough-stop engineering to suppress leakage. Dielectric isolation makes that leakage less sensitive to the subfin doping profile but adds removal and fill steps. It also weakens the direct thermal path through silicon, making the contacts, metal stacks and package more important for heat extraction. [24], [26] Fluorine is concentrated around selected Intel device structures in the maps. WF6 is a standard precursor for W nucleation and fill, while barrier films protect adjacent dielectrics from fluorine attack. Low-fluorine W processes reduce the residual-F burden. Chloride-based precursors avoid introducing F during W deposition, but require control of chlorine attack, nucleation and fill quality. The integration target is a continuous, low-resistance W path with a thin protective liner and minimal chemical damage to the surrounding stack. [20], [27], [28] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. We measured cell height, gate pitch, metal geometry, and ribbon dimensions at the XTEM sites shown below. The tables group these dimensions by site and device polarity. Our “sheet cuts” cross the silicon channel and show the ribbons end-on. “gate cuts” run along the channel through successive gates. The 18A logic cell dimensions point to a five-track logic library while the N3E and Intel 3 cell dimensions evidence a seven-track logic library. The DDR-PHY uses wider M0 wires and much larger spacing than core logic. That trades routing density for lower wire resistance and weaker coupling between neighboring nets. The geometry suits the current delivery and coupling requirements of analog, clock, and I/O circuitry. PowerVia lets 18A combine a compact cell height with wider M0 geometry by moving the main power rails off the signal-routing tracks. That relaxes local wire scaling while preserving a small cell footprint. Cell height and gate pitch set the geometric density; pin access and routability determine how much of it a real block can use. [29] The biggest takeaway from our gate-pitch measurements is that Intel 18A compute logic and TSMC N3E GPU logic have similar density in the Bohr representative-cell model. The 18A example is 18.6% denser than the Intel 3 GPU example. Gate pitches are nearly identical across the three sites, so cell height drives most of the difference. The Bohr model combines a four-transistor NAND2 spanning three gate pitches and a 32-transistor scan flip-flop (SFF) spanning nineteen pitches, weighting their densities 60:40. The sensitivity column shows how independently changing cell height and gate pitch by ±1 nm changes the result. This compares representative cell geometries; whole-die density also depends on cell mix and placement. The 18A P-core gives M0 substantially more metal cross section than the N3E vector engine. Treating each profile as a trapezoid gives 2.63 times the area per line and 1.84 times the area after normalization by routing pitch. The larger section reduces the geometric contribution to line resistance and lowers current density for a given current. Taller and wider wires also add capacitance, so circuit delay depends on the balance of resistance and capacitance. The DDR-PHY has less metal area per routing width than the 18A core fields, while remaining above N3E. [30] Area = height × (top CD + bottom CD) / 2, including liners. Area/pitch normalizes by routing width. Taper is the symmetric sidewall angle from vertical, with the largest angle belonging to the DDR-PHY. Compute tile The measurements show how ribbon dimensions and gate-stack geometry vary across the compute tile and between NMOS and PMOS to balance channel drive, gate load and the space needed for the dielectric/WFM stack across logic, SRAM and the DDR-PHY. Width mainly changes available channel perimeter; thickness also changes electrostatic control and carrier confinement. Gate-stack thickness then determines the space left for low-resistivity fill P-core and LP E-core logic Both the P-core and LP E-core use multiple nanosheet widths. Widths are measured on high-magnification XTEMs while wider-field images demonstrate additional width choices within the LP E-core. Multiple widths are expected even within an LP E-core. Timing-critical paths, buffers and cells with different fanout need different drive strengths. The lower-magnification fields show this width diversity beyond the sites quantified in the table. L2 and L3 SRAM GAA gives SRAM designers another way to balance the pull-up (PU), pass-gate (PG), and pull-down (PD) transistors. FinFET bitcells set device strength through fin count while GAA adds nanosheet width as a sizing knob. In a 6T SRAM cell, a strong pull-down relative to the pass-gate limits read disturbance, while a strong pass-gate relative to the pull-up improves writability. During a write, the pass-gate and write driver pull the node storing “1” below the inverter trip point. During a read, the pull-down holds the node storing “0” low. Bias, threshold voltage, mismatch and assist circuitry set the remaining margin. FinFET high-current cells commonly use a PU:PG:PD fin-count pattern of 1:2:2, a device-sizing ratio rather than a current ratio. Ribbon width lets Intel balance SRAM strengths without adding whole fins. The L2 cell uses its narrowest ribbons for PU and widest for PD, improving writability and read stability respectively. Intel’s disclosed HCC operates without assist; its denser HDC uses negative-bitline write assist. Pulling the selected bitline briefly below ground increases pass-gate overdrive so it can overpower the pull-up at lower supply voltage. That buys density and low voltage writability at the cost of boosting circuitry, switching energy, and additional voltage stress that must be controlled. [31], [32] Four rectangular ribbons give the perimeter = 8 × (width + thickness), before corner rounding. PG/PU is 1.49 and PD/PG is 1.16. The L3 structures closely resemble L2 in layout and cell height. Fewer L3 nanosheet widths are tabulated because fewer high-magnification images were available. DDR PHY The DDR-PHY trades density for controlled analog behavior and reliable off-chip signaling. It contains drivers, receivers, delay circuits, and calibration logic that set drive strength, sampling time, and voltage margin. Repeated four-sheet devices with similar widths fit the use of regular transistor units for matching and programmable drive. Its wider local wiring provides room for current delivery and separation of sensitive signals, while consuming more area than a dense core-logic grid. The layout serves the memory channel’s electrical requirements as well as digital logic density. [33] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Intel 3 GPU devices Vector engine logic Intel 3’s XVE logic uses two-fin PMOS and NMOS devices with power rails in M0. Its cell height and M0 pitch give a seven-track geometry, two tracks more than the 18A logic. One-fin groups also appear among the two-fin devices. Intel 3 L2 SRAM The Intel 3 L2 SRAM uses the familiar HCC sizing pattern: one PU fin, two PG fins, and two PD fins. N3E GPU devices Vector engine logic The N3E XVE field contains repeated two-fin devices with seven-track cell geometry. N3E remains a FinFET process, giving Panther Lake a direct FinFET-to-RibbonFET comparison. N3E L2 SRAM The N3E L2 SRAM uses the same PU:PG:PD fin-count pattern of 1:2:2. Panther Lake-U follows Lunar Lake’s floorplan quite closely. Both pair 4 P-cores with 4 LP E-cores and NPU, media and display engines in similar locations. Lunar Lake also uses Xe2, the direct predecessor to Panther Lake’s Xe3 GPU. This makes Lunar Lake the most direct basis for our comparisons. Arrow Lake differs in core count and uses the older Xe-LPG GPU architecture, so we only use it where it offers a more direct component-level comparison. Compute tile Panther Lake compute-tile floorplans remain sparse even months after launch. Intel 18A’s backside metal and dielectric stack must be removed without damaging the underlying structures before a clean transistor-level floorplan can be imaged. Most published die shots hide or heavily process the background, but we are quite proud of the die shot we achieved and are excited to show the work we have done. We measured the areas of the key components on the compute tile and compared them with their Lunar Lake predecessors on TSMC N3B. These help us to capture changes in block area and compare the two chips across process nodes and designs. Our total tile areas exclude the scribe-line area. The compute-plus-GPU subtotal below uses the PTL-U compute tile and GT1 GPU; it excludes the I/O tile and passive base. Individual block areas use the boundaries marked on the floorplans The compute-plus-GPU row is recomputed from the displayed PTL-U and GT1 areas. Component rows use their stated per-region counts and are not an additive partition of the whole tile. The P-core area remains almost unchanged between Lunar Lake and Panther Lake, despite L2 capacity increasing from 2.5 MiB to 3 MiB. Arrow Lake uses the same Lion Cove core as Lunar Lake but also has a 3 MiB L2. Cougar Cove fits 20% more L2 into the same P-core area. The larger private cache keeps more of each core’s working set close to its execution units, reducing access to shared L3 and DRAM. Extra capacity adds storage leakage and lookup energy, so designers balance it against avoided lower-level accesses. The shared P-core L3 cache also shrank by 14.8%. [2] Cougar Cove combines a similar footprint with Intel’s reported power-efficiency improvements. RibbonFET’s tighter channel control reduces leakage, while PowerVia reduces supply droop and allows tighter voltage guardbands. [1] Darkmont’s four-core LP E-core cluster is 5.0% smaller than Skymont’s on Lunar Lake, with most of the reduction in its L2 regions. The 1 MiB region shrank by 8.4% and the 1.5 MiB region by 14.9%. The tag arrays also use one fewer visible row. Tags identify which memory addresses the data array holds, so rearranging them changes the cache’s layout and wiring without requiring less data capacity. [2] The LP E-cores share one L2. This pools capacity and avoids duplicating all the cache machinery, but the four cores contend for its banks and bandwidth. Their separate cluster also keeps light work away from the performance cluster and its L3, allowing that larger domain to sleep. [1], [2] Cache area includes more than the storage cells. Tags identify each line, decoders select rows, sense amplifiers read the small bitline signal, and wires connect to the banks. Splitting an array into smaller sections shortens wordlines and bitlines, improving access speed, but duplicates peripheral circuits. Panther Lake’s smaller cache regions therefore reflect the complete memory implementation, including how much of each region is devoted to storage. [34] Unlike Meteor Lake and Arrow Lake, Panther Lake has no separate SoC tile. The NPU, LP E-cores, memory controllers, PHYs, media and display engines now share the compute tile. This removes an active die and keeps CPU memory traffic on one die. The cost is moving PHY and I/O-related circuitry onto 18A: drivers, receivers and analog circuits must still meet external voltage, loading and signal-integrity requirements, so their area does not shrink like dense digital logic. [1], [2] The biggest shrink comes from the NPU, which occupies 36.9% less area. NPU 5 consolidates the same total INT8 MAC count into half as many neural compute engines. Each of the three NCEs has a larger MAC array to make the complete NCE envelope 22.6% larger than an NPU 4 engine. Consolidation also halves the number of scratchpads and SHAVE DSPs, from 12 to 6. The MAC array handles matrix multiplication and convolution, while SHAVE executes vector and custom operations that fit the array poorly. [1], [2], [35] The paired floorplans identify each NCE envelope and its scratchpad, MAC, and SHAVE regions. Each measured MAC polygon is counted once per NCE in the area accounting below. The scratchpads store weights, activations, and intermediate results near the MAC arrays, allowing repeated use without fetching them again from DRAM. Halving their number delivers the largest measured area saving but leaves less local storage for the same total MAC count. Layers that no longer fit locally require smaller working tiles or more transfers of intermediate data. The benefit depends on keeping the enlarged arrays busy while managing that tighter storage budget. [36] NPU 5 also adds native FP8. Using half the operand width of FP16 reduces storage and transfer demand, helping workloads fit the smaller local memory budget. Lower precision and format-dependent range make scaling and model validation part of deployment. Hardware activation functions further reduce work that would otherwise occupy the programmable DSPs. [1], [2] Microsoft requires an NPU to deliver at least 40 TOPS for Copilot+ PCs. Both Lunar Lake and Panther Lake meet this threshold, but Panther Lake uses significantly less silicon. GPU tiles Panther Lake is Intel’s first product with Xe3, its latest GPU architecture. It offers two different GPU tiles: a smaller GT1 tile with 4 Xe3 cores on Intel 3 and a larger GT2 tile with 12 Xe3 cores on TSMC N3E. Panther Lake allows us to compare the same GPU architecture across both Intel 3 and TSMC N3E. Wildcat Lake adds a third Xe3 implementation on Intel 18A. A future newsletter will detail Xe3 and its implementation differences across all three process nodes. GT2 scales Xe3 to a different physical layout, with render slices arranged vertically instead of GT1’s horizontal arrangement. Slice placement sets the distances to shared cache banks and the D2D interface. Those wires consume area and add delay, so scaling the number of Xe cores also requires a new balance of cache placement, routing and timing. [1] What’s immediately obvious is that the GT2 tile on TSMC N3E has much smaller Xe cores than GT1. These block areas include logic, caches, and routing. An Xe core on the GT1 tile is ~69% larger than one on Lunar Lake, and ~55% larger than one on GT2. Intel 3 therefore uses substantially more area per Xe core. The block-area gap exceeds the measured logic and SRAM density gaps, bringing routing, timing targets, cell mix, and floorplan allocation into the comparison. The measured vector/matrix engine region is almost unchanged between Lunar Lake and Panther Lake’s GT2 tile. Xe3 retains eight 512-bit vector engines and eight 2048-bit XMX engines per core. Its gains also come from feeding those engines more effectively: more resident threads hide stalls, and variable register allocation lets shaders trade registers per thread against the number of threads kept active. [1] The shared L1/SLM capacity increased by 33% from 192 KiB to 256 KiB, while its area increased only 5%, raising effective density by 27%. L1 retains reused cache lines, while software-managed SLM lets a thread group share data locally. Both reduce traffic to more distant memory. Allocating more SLM per group can also limit how many groups reside on a core at once. [1], [37] The GT1 tile carries 4 MiB of L2 against 16 MiB on the GT2 tile. GT1 divides its L2 cache into four 1 MiB banks, while GT2 uses eight 2 MiB banks. Each bank contains 128 macros, but each N3E macro stores 16 KiB, twice the Intel 3 macro’s 8 KiB capacity. The N3E macro is only 54% larger while holding twice as many bits, giving it 30% higher density: ~23.7 Mbit/mm² versus 18.3 Mbit/mm². Including bank-level circuitry, the gap widens to ~16.9 Mbit/mm² on GT2 versus ~10.4 Mbit/mm² on GT1. GT2 gains density with its macros storing more bits per unit area, and those macros occupy more of each cache bank. Larger macros spread decoder and sense-amplifier overhead across more storage, while a more compact bank layout reduces the share spent on control and routing. The compromise is longer wordlines and bitlines that carry more capacitance. [34] I/O tile Panther Lake uses two I/O tile variants, both fabricated on TSMC N6. The smaller one provides 4 PCIe 5.0 and 8 PCIe 4.0 lanes and serves lower-tier systems as well as those without a discrete GPU, while the larger one adds 8 PCIe 5.0 lanes, bringing the total to 20 lanes, for discrete-GPU connectivity. Panther Lake SKUs with the larger 10- or 12-Xe GPUs use the smaller I/O tile. [38] The smaller I/O tile adds a PCIe 4.0 block and a Thunderbolt block to Lunar Lake’s I/O layout, providing four additional PCIe 4.0 lanes and another Thunderbolt 4 port. Its repeated N6 blocks retain nearly identical areas and layouts. Reusing these proven PHYs and controllers avoids porting and requalifying external interfaces on 18A, where faster digital logic offers less benefit to circuits constrained by the off-chip link. [38] SemiAnalysis’s teardown lab (STEEL) dives deep into the world’s advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. We’re hiring technical experts from system to transistor and everywhere in between. Check out our Careers page. Panther Lake offers scalability and modularity through its disaggregated packaging that partition compute, GPU, and I/O silicon into separate tiles allowing for a suite of tile configurations. This partitioning makes the package part of Intel’s node economics as it determines how much leading-edge wafer area each product consumes, which functions can remain on other processes, and how much configuration freedom Intel can offer from a shared set of tiles. Furthermore, fabricating the compute and GPU tiles separately confines the new 18A process to the compute tile and allows graphics and I/O to use other, more established, and more cost-effective processes. For Panther Lake, the GPU and I/O tiles are assembled alongside the compute tile on a passive silicon base using Foveros-S. Intel’s current technology brief lists a nominal 36 µm pitch for Foveros-S. Through-silicon vias (TSVs) in the base connect the fine wiring above to the larger package connections below. The functional tiles sit side by side on that passive base in a 2.5D configuration. [39] Our cross-section through the compute and GPU tiles shows the package’s wiring hierarchy. Microbumps connect each active tile to the passive silicon base; its fine redistribution layer (RDL) carries the short, dense tile-to-tile links. TSVs carry connections through the base to the package substrate, which fans them out to the much coarser motherboard solder joints. The base supplies interconnect, while computation remains in the active tiles above it. [39] At the compute-tile edge, the higher-magnification inset shows a local microbump spacing of approximately 25.24 µm and a feature width of 12.33 µm. These local spacings are finer than Intel’s nominal Foveros-S value. The X-ray fields further confirm tighter neighboring bumps, consistent across every die-to-die area found on each tile. Additional X-ray analysis is offered after the paywall. Putting the memory controller beside the CPU removes the D2D transfer that CPU memory requests required in Meteor Lake and Arrow Lake. This avoids the extra transmitter, receiver, and link traversal, saving interface energy and latency. Panther Lake’s separate GPU still crosses a D2D link to reach DRAM, so its larger local caches also help contain package traffic. [1], [40] Smaller dies are less likely to contain a random fatal defect, and screening them before assembly prevents one bad tile from consuming a complete package of good silicon. Reuse also spreads design and qualification work across more products. Against those gains, Intel pays for the passive base, D2D circuits, extra bonding and test steps, and losses during assembly. Cost per working product across the portfolio captures the combined effect of wafer yield, reuse, test, and assembly. [29] Wildcat Lake packaging Intel launched Core Series 3, formerly Wildcat Lake, on 16 April 2026 for value mobile and edge systems. Wildcat Lake keeps 18A but removes the passive base and combines more functions on one die to simplify the package. The two products therefore reveal two distinct ways to commercialize the same leading-edge process. [41] Wildcat Lake’s 18A die combines up to two Cougar Cove P-cores, four Darkmont LP E-cores, two Xe3 cores and a smaller NPU. A separate platform-controller die supplies I/O, connected through UCIe, Intel’s first processor implementation of the standard. Consolidating graphics remove a tile boundary and the passive base, reducing assembly complexity for a modest-bandwidth value product. It also ties CPU and graphics scaling to the same die, giving up Panther Lake’s ability to swap in a much larger GPU. [42], [43] In July 2021, Intel CEO Pat Gelsinger set out an ambitious process roadmap aimed at regaining performance leadership by 2025, later described as five nodes in four years. Five years and one CEO later, Intel’s comeback story is not as unambiguously positive as Pat may have hoped. [44], [45] Intel once set the pace for process technology, bringing high-k metal gate technology and FinFETs into volume production years ahead of the rest of the industry. Its 22 nm FinFET process reached consumers with Ivy Bridge in 2012. [46] Intel’s integrated device manufacturing (IDM) model allowed its architects and process engineers to co-optimize products and processes. Starting with Sandy Bridge, Intel dominated x86, while AMD struggled with Bulldozer. That lead faltered at 14 nm and broke at 10 nm. Intel targeted a massive 2.7× density increase, but the node arrived years late and required several revisions before it could support Intel’s full lineup. This delay forced Intel to stretch 14 nm across six generations, while TSMC moved ahead in process technology and AMD recovered in x86. By 2019, Intel was still shipping 14 nm across most of its product stack, with its 10 nm client ramp focused on Ice Lake mobile processors. Meanwhile, TSMC was shipping N7 and N7+, and AMD’s Zen 2 compute chiplets used N7 to raise core counts and improve efficiency. Intel’s process failures were central to its decline, but unsound business decisions furthered their downward slide. Product delays compounded product mistakes, pushing client, server, and FPGA roadmaps off schedule. Several attempts to enter AI (Nervana and Gaudi) and networking (Tofino) also failed to establish lasting businesses. Intel’s recovery has focused on consumer CPUs and advanced packaging. Tiger Lake, Alder Lake, Lunar Lake and now Panther Lake have restored Intel’s consumer roadmap. On the process side, Intel 4 shipped with Meteor Lake, Intel 3 with Granite Rapids and Sierra Forest, and Intel 18A with Panther Lake. Intel has also made advanced packaging part of its foundry offering. However, Intel is still playing catch-up in servers. Several Xeon generations arrived years late and trailed contemporary AMD and Arm server CPUs in performance, efficiency, and core count. The process roadmap is back, but Intel does not hold the same process-technology leadership position it held prior to 10 nm. The introduction of gate-all-around nanosheets and backside power delivery are two of the biggest changes to transistor integration in a decade. Intel took on both changes at once: 18A paired its first RibbonFET with PowerVia in Panther Lake. Panther Lake is a substantial manufacturing milestone. Our cross-sections show how RibbonFET and PowerVia reshape local contacts and wiring, while the floorplans show where architectural consolidation and process choices save area. A sustained competitive lead depends on product performance, cost, yield, and the next implementation. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page.. [1] Intel, “Intel Tech Tour 2025 Panther Lake recap,” Doc. 866361, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/866361/ITT_2025_Panther_Lake_Recap1.pdf [2] Intel, “Core Ultra processors Series 3 datasheet, volume 1,” Doc. 872188-001, Jan. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/872188/872188-001.pdf [3] N. Horiguchi and E. Beyne, “Backside power delivery: How to power chips from the backside,” imec Reading Room, Nov. 25, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/how-power-chips-backside [4] W. Hafez et al., “Intel PowerVia technology: Backside power delivery for high density and high-performance computing,” in Proc. IEEE Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2023, pp. 1–2, doi: 10.23919/vlsitechnologyandcir57934.2023.10185208. [5] K. Fischer et al., “Intel 18A platform technology featuring RibbonFET (GAA) and PowerVia for advanced high-performance computing,” in Proc. Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2025, pp. 1–3, doi: 10.23919/vlsitechnologyandcir65189.2025.11075006. [6] K.-F. Cheng, C.-L. Teng, H.-Y. Huang, and H.-C. Chen, “Metal oxide composite as etch stop layer,” U.S. Patent 12 176 247 B2, Dec. 24, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12176247B2/en [7] S. W. King, “Dielectric barrier, etch stop, and metal capping materials for state of the art and beyond metal interconnects,” ECS J. Solid State Sci. Technol., vol. 4, no. 1, pp. N3029–N3047, 2015, doi: 10.1149/2.0051501jss. [8] A. V. Mule’, D. J. Towner, D. Seghete, C. R. Ryder, and A. A. Gonzalez, “Multi-layer etch stop layers for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20220102343 A1, Mar. 31, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20220102343A1/en [9] C.-C. Wang and J. H. Wang, “Interconnect structure with dielectric cap layer and etch stop layer stack,” U.S. Patent Appl. 20230253247 A1, Aug. 10, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20230253247A1/en [10] Y. J. Wu, K.-F. Cheng, C.-C. Lee, H.-K. Chang, and H.-Y. Huang, “Etch stop layer for interconnect structures,” U.S. Patent Appl. 20240332070 A1, Oct. 3, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240332070A1/en [11] M. G. Rainville, N. Shankar, K. S. Reddy, and D. M. Hausmann, “Deposition of aluminum oxide etch stop layers,” U.S. Patent Appl. 20180197770 A1, Jul. 12, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20180197770 [12] J. S. Leib et al., “Conductive lines having molybdenum liner and tungsten fill for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20240429126 A1, Dec. 26, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20240429126 [13] M. Naik, “Cobalt enables power and performance scaling at single-digit logic nodes,” Applied Materials, Dec. 17, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://www.appliedmaterials.com/us/en/blog/blog-posts/cobalt-enables-power-and-performance-scaling-at-single-digit-logic-nodes.html [14] Lam Research, “Breaking through AI’s invisible barrier with molybdenum,” Lam Research Newsroom, May 6, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://newsroom.lamresearch.com/molybdenum-metallization-ai-revolution [15] P. Yashar, G. Malyavanatham, and H. Vijwani, “Integrated circuit interconnect structures with niobium barrier materials,” U.S. Patent Appl. 20240112951 A1, Apr. 4, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240112951A1/en [16] Applied Materials, “Applied Materials unveils chip wiring innovations for more energy-efficient computing,” Applied Materials Investor Relations, Jul. 8, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://ir.appliedmaterials.com/news-releases/news-release-details/applied-materials-unveils-chip-wiring-innovations-more-energy [17] Samsung, “Samsung showcases AI-era vision and latest foundry technologies at SFF 2024,” Samsung Semiconductor, Jun. 13, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://semiconductor.samsung.com/news-events/news/samsung-showcases-ai-era-vision-and-latest-foundry-technologies-at-sff-2024/ [18] C. W. Yeung et al., “Channel geometry impact and narrow sheet effect of stacked nanosheet,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2018, pp. 28.6.1–28.6.4, doi: 10.1109/iedm.2018.8614608. [19] S. Mochizuki et al., “Evaluation of (110) versus (001) channel orientation for improved nFET/pFET device performance trade-off in gate-all-around nanosheet technology,” in Proc. Int. Electron Devices Meeting (IEDM), Dec. 2023, pp. 1–4, doi: 10.1109/iedm45741.2023.10413854. [20] D. G. Ouellette et al., “Fabrication of gate-all-around integrated circuit structures having molybdenum nitride metal gates and gate dielectrics with a dipole layer,” U.S. Patent 12 051 698 B2, Jul. 30, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12051698B2/en [21] imec, “Advancing the CFET-based device roadmap with novel integration modules and standard-cell architectures,” imec, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/advancing-cfet-based-device-roadmap-novel-integration-modules-and-standard-cell [22] A. Reznicek, X. Miao, C. Lee, and J. Zhang, “Wrap around contact for nanosheet source drain epitaxy,” U.S. Patent 11 302 813 B2, Apr. 12, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US11302813B2/en [23] J. A. Kittl, J. G. Hong, D. R. Palle, and M. S. Rodder, “Methods for varied strain on nano-scale field effect transistor devices,” U.S. Patent 9 978 833 B2, May 22, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9978833B2/en [24] S. Gandikota et al., “Method of reducing metal gate resistance for next generation NMOS device application,” Int. Patent Appl. WO 2024/137272 A1, Jun. 27, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/WO2024137272A1/en [25] J. Zhang et al., “Full bottom dielectric isolation to enable stacked nanosheet transistor for low power and high performance applications,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2019, pp. 11.6.1–11.6.4, doi: 10.1109/iedm19573.2019.8993490. [26] C. Yoo, J. Chang, Y. Seon, H. Kim, and J. Jeon, “Analysis of self-heating effects in multi-nanosheet FET considering bottom isolation and package options,” IEEE Trans. Electron Devices, vol. 69, no. 3, pp. 1524–1531, Mar. 2022, doi: 10.1109/ted.2022.3141327. [27] S. S. Pradhan, D. B. Bergstrom, J.-S. Chun, and J. Chiu, “Tungsten gates for non-planar transistors,” European Patent Appl. EP 3 506 367 A1, Jul. 3, 2019. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/EP3506367A1/en [28] L. Schloss and X. Ba, “Tungsten films having low fluorine content,” U.S. Patent 9 754 824 B2, Sep. 5, 2017. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9754824B2/en [29] Intel Foundry, “Accelerating AI and HPC with advanced process and packaging technologies,” Doc. 367370-001US, Jun. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-11/intel-foundry-hpc-ai-brief.pdf [30] M. Lofrano, X. Chang, H. Oprins, and Z. Tokei, “Mitigating the thermal bottleneck in advanced interconnects,” imec, Sep. 28, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/mitigating-thermal-bottleneck-advanced-interconnects [31] S. Bair, “Intel at ISSCC 2025: Navid Shahriari invited talk, eight papers, forums, panelist & product details,” Intel Community, Feb. 19, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://community.intel.com/t5/Blogs/Tech-Innovation/Edge-5G/Intel-at-ISSCC-2025-Navid-Shahriari-Invited-Talk-Eight-Papers/post/1667592 [32] D. Chandra, E. Potladhurthi, D. R. S. Reddy, and K. S. Rengarajan, “Tunable negative bitline write assist and boost attenuation circuit,” U.S. Patent Appl. 20160203857 A1, Jul. 14, 2016. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20160203857A1/en [33] Synopsys, “Advantages of firmware-based training in high-speed DDR IP,” Synopsys IP Technical Bulletin. Accessed: Sep. 14, 2026. [Online]. Available: https://www.synopsys.com/articles/firmware-based-training-ddr-ip.html [34] N. Muralimanohar, R. Balasubramonian, and N. P. Jouppi, “CACTI 6.0: A tool to understand large caches,” Hewlett-Packard Laboratories, 2009. Accessed: Sep. 14, 2026. [Online]. Available: https://users.cs.utah.edu/~rajeev/cacti6/cacti6-tr.pdf [35] Intel, “Intel Tech Tour 2024 Lunar Lake AI hardware accelerators,” Doc. 824436, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/824436/2024_Intel_Tech%20Tour%20TW_Lunar%20Lake%20AI%20Hardware%20Accelerators.pdf [36] Y.-H. Chen, J. Emer, and V. Sze, “Eyeriss: A spatial architecture for energy-efficient dataflow for convolutional neural networks,” in Proc. 43rd ACM/IEEE Annu. Int. Symp. Comput. Archit. (ISCA), Jun. 2016, pp. 367–379, doi: 10.1109/isca.2016.40. [37] Intel, “Introduction to the Xe-HPG architecture,” Doc. 758306, Nov. 4, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/developer/articles/technical/introduction-to-the-xe-hpg-architecture.html [38] Intel, “Core Ultra processors Series 3 for the edge,” Doc. 855291. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/855291/Intel%C2%AE%20Core%E2%84%A2%20Ultra%20Processors%20Series%203%20for%20Edge%20Overview_2.pdf [39] Intel Foundry, “Foveros technology brief,” Doc. 366411-001US, Feb. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-07/foveros-25d-product-brief.pdf [40] D. Das Sharma, “UCIe: Building an open chiplet ecosystem,” UCIe Consortium, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.uciexpress.org/_files/ugd/0c1418_c5970a68ab214ffc97fab16d11581449.pdf [41] Intel, “Intel launches Intel Core Series 3 processors,” Intel Newsroom, Apr. 16, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-launches-intel-core-series-3-processors-changing-the-game-for-everyday-computing.html [42] Intel, “Core Series 3 launch press deck,” Apr. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://download.intel.com/newsroom/2026/Intel-Core-Series-3/Intel-Core-Series-3-Launch-Press-Deck.pdf [43] Intel, “Intel outlines architectures for agentic AI at Hot Chips 2026,” Intel Newsroom, Aug. 24, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-outlines-architectures-for-agentic-ai-at-hot-chips-2026.html [44] Intel, “Intel accelerates process and packaging innovations,” Intel Investor Relations, Jul. 26, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/filings-reports/all-sec-filings/content/0001193125-21-224438/d199788dex991.htm [45] Intel, “Intel reports third-quarter 2021 financial results,” Intel Investor Relations, Oct. 21, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/1505/intel-reports-third-quarter-2021-financial-results [46] Intel, “3rd generation Intel Core processors bring exciting new experiences and fun to the PC,” Intel Investor Relations, Apr. 23, 2012. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/577/3rd-generation-intel-core-processors-bring-exciting
Ken Paxton to bring campaign tour to El Paso. Here’s when and where
Paxton’s “Protecting the Texas Promise” tour is scheduled to stop in El Paso next week. The event is free, though spots can be reserved.
Scientists burned their own scrolls to unlock a 2,000-year-old mystery
Scientists discovered that tiny amounts of lead in ancient ink can make writing inside burned papyrus scrolls stand out dramatically in X-ray scans. The technique could help unlock lost Greek and Roman texts preserved by the eruption of Mount Vesuvius nearly 2,000 years ago.
Jayden Daniels avoids Injured Reserve for now
Commanders QB Jayden Daniels not scheduled for surgery and will remain on roster
Quick hitters: O-line health, safety depth and Dan Campbell’s first days in Detroit with Glenn
Allen Park — Detroit Lions coach Dan Campbell and quarterbacks coach Mark Brunell met with the media on Friday. Here are the noteworthy items from those conversations. Healthier up front, banged up in the back It’s good news, bad news on the injury front. First, the offensive line is going to be far closer to full strength with starters Blake Miller (knee) and Christian Mahogany (hip) on track to return to the lineup. That provides stability the offense lacked against Buffalo, particularly at right tackle, where backup Larry Borom allowed 11 quarterback pressures and committed a trio of penalties. Subscribe However, with that same unit, veteran Ben Bartch (foot) is likely to miss Sunday’s matchup with the Jets. The left guard competition that’s been ongoing since May has effectively been whichever option is healthy that week. In the back end, safety Thomas Harper (ankle) is also unlikely to be available on Sunday. That leaves the team precariously thin at the position following Avonte Maddox going on injured reserve this week. Christian Izien is expected to get the start alongside Chuck Clark. “Izzy's been working a lot back there and had a full week,” Campbell said. “And he's gotten a ton of work this week, a ton of reps, full-speed reps. ‘This is what you're going to do, this is the calls’ and just dousing him with full-speed reps and he's done a good job this week.” Safety depth is the bigger concern. The team is expected to count on some combination of Jalen Mills, who signed to the practice squad on Monday, Bishop Fitzgerald, the undrafted rookie poached off the Steelers’ practice squad on Tuesday, and rookie cornerback Keith Abney, who doesn’t have experience at safety. “I'll say this about Abney, man, for a rookie, he's a pretty dang smart, conscientious, aware football player that's got a ton of room to really take off,” Campbell said. “…He's young. He's another one, he just needs reps and reps. But, if we need it, that'll be a guy who may have to go in for us.” You can check here for the full injury report, with game designations, later this afternoon. Reflecting on the past Responding to comments made by Jets coach Aaron Glenn this week, Campbell reflected on his earliest days with the Lions, before the coaching staff had been fleshed out and it was just he and Glenn at the facility working through what they wanted things to look like. “It was just he and I in the lab,” Campbell said. The coach said the two would fill the whiteboard that remains in current coordinator Kelvin Sheppard’s office top to bottom with notes about philosophy, coaching style, team identity and the type of players they wanted to target. “He looks different than me,” Campbell said. “I'm taller, I'm whatever. He's quicker. All these different things, man, but we're really the same. I mean we're so much the same. And he's the defensive version, I'm the offensive version. He was my right hand man. …It was fun, man. Those were good days.” Campbell said it was one of the best and worst days of his life when the Jets hired Glenn to be their coach. “AG means the world to me,” Campbell said. “He's one of my dearest friends because I know what he's made of. “…It's because you know you're losing a little piece of you. That's what he meant to me and to us. So, that's hard.” Traits under center A couple of weeks back, Sheppard noted that Brunell had identified Saints quarterback Tyler Shough as the best prospect at the position ahead of the 2025 draft. On Friday, Brunell confirmed his evaluation and explained what he looks for when studying a young quarterback. Here’s the full answer: “Young quarterbacks, you have to look at everything, you know? I look at guys coming out of college just like I look at any free agents that we might be looking at, or guys that we might add to our roster. Do they take care of the ball? Are they on time? How is their decision-making? How are their feet? “It's tough because you look at a college player, you don't understand what they're trying to do offensively, what their reads are, but you can identify when a guy is accurate, obviously, and when the ball's getting there on time. If there are a lot of interceptions, it raises a red flag. And I think with a lot of the spread offenses of what you're seeing, when you see a young player and they're running some pro concepts and he's having to make protection calls, and he's getting the right play out of the run game, and when there's a lot on his plate and he's executing it very well, and he's managing all of that, that really jumps out at you. It’s really hard to find. “That's one thing we saw with Luke Altmeyer. He had a lot of experience. We call it, ‘Hey, he's playing quarterback.’ And what does that mean? It's not just completing passes. It's getting guys lined up, getting the right play, getting the protection call right, just fixing some problems, being able to progress (through reads). And there's still some young guys out there that can do that at a high level, which is good to see.” Regarding Altmyer, who competed for the team’s backup job through the offseason and currently resides on the practice squad, Brunell acknowledged physical development slows once the season starts, because there aren’t reps to go around. However, there’s still extensive mental development that’s ongoing. “The key for him is approach the game as if you're the starter, mentally,” Brunell said. “And that's really all you can do. Approach the game as if you're the starter and be good in the (class)room. You come in alongside Jared (Goff), and you come in alongside Josh (Dobbs) and (do) whatever they need. And if you get an opportunity to talk to Luke, he'll tell you he does have a lot of responsibilities besides just getting donuts for us on Saturday. “For him, it's mentally staying focused, and even though there's really no chance this Sunday of him playing, he has to approach it as if he's taking the first snap and playing the whole game. So what's our game plan? What are our checks? What are we anticipating? And then during the game, we keep him involved as far as looking at coverages and pressures. And so, really, for him, it's just a mental game. And for now, that's all we can do.” Reason for more zone The Lions have significantly increased their usage of zone coverage on defense this season. I asked Campbell if that was a reaction to their personnel or driven by the focus to generate more turnovers, given it can be easier to produce interceptions when you can keep eyes on the quarterback while playing zone. “I think it was a little bit of both,” Campbell said. “We just felt like this would suit us a little bit better up to this point, and then be disruptive and get takeaways, which worked well Week 1. We had two (opportunities) last week against Buffalo we weren’t able to get, but they’re there.” I followed up by asking how much the combination of heavy blitzing with the back end playing zone has contributed to some of the early-season coverage woes, since adding extra players to the pass rush means leaving the coverage short-staffed. “I mean, it’s challenging, and that’s why a lot of the things we’ve done in zone, for the most part, have been to reduce that stress level back there,” Campbell said. “But that also requires the front getting there. And if you don’t get there, we already kind of talked about that, but there (has to be) a trust there.” The alternative, Campbell explained is sending four and it taking longer for the rush to get home, which can create different problems for a defense. “You can bleed yards,” Campbell said about the strategy. “It gets a little longer and it’s dink-and-dunk and run after catch. …So, we do what we think is right by what we feel like our personnel (does well). But also the game plan, who you’re going in to play, the matchups, their offense. “We’re not stuck on one way.” Detroit Football Network is a reader-supported publication. To receive new posts and support my work, consider becoming a free or paid subscriber. Subscribe
Science Museum will preserve 130 acres on the St. Croix River
Advocates say the move will permanently protect land surrounding a research station while inspiring future generations of scientists and artists.
49ers Get Concerning Injury News Ahead of Cardinals Game
Ahead of Sunday’s matchup with the Arizona Cardinals, the San Francisco 49ers kicked off preparations Wednesday, and their initial Week 3 participation report showed a busy list of absences. 49ers Lose Another Defensive Tackle to IR San Francisco placed defensive tackle C.J. West on injured reserve Wednesday with a knee injury, the ninth player the […] The post 49ers Get Concerning Injury News Ahead of Cardinals Game appeared first on HEAVY.
Sporticast: It’s Fat Bear Week. Where Are the Chicago Bears?
On the 590th Sporticast episode, hosts Scott Soshnick and Eben Novy-Williams discuss some of the biggest sports business stories of the week, including Sportico‘s recent list of the highest-paid players in the NFL. First, however, they talk about Fat Bear Week. The viral creation from Alaska’s Katmai National Park & Preserve allows people to vote …
Pól de Buitléir: Former Sinn Féin MLA and IRA prisoner Paul Butler dies
He had confessed to the 1974 murder of 50-year-old reserve RUC constable John Rodgers but later went into politics.
Where problems are solved: Get to know the new Interdisciplinary Science and Engineering Building at Case Western Reserve University | CWRU Newsroom
This story is the first in a series introducing the research, people and building that will define Case Western Reserve’s next chapter of discovery....
Jonathon Brooks returns to injured reserve
Panthers annual injury driven roster shuffle continues
Business activity at over five-year high; inflation pressures building
The Atlanta Federal Reserve's gross domestic product tracking estimate is running at a 5.1% rate.
Colts' Latest Roster Move Creates Big Opportunity for Rookie
The Indianapolis Colts placed veteran defensive lineman Micheal Clemons on Injured Reserve, paving the way for a rookie or two to earn more playing time.
ECB, EU central banks oppose stablecoin bank deposit rule
Stablecoin issuers should not be required to hold a minimum proportion of their reserve assets as bank deposits because they could leave lenders exposed to changes in the stablecoin market and less sticky deposits, the ECB and other EU central banks said on Tuesday.
Jiang Feng: The Unravelling of German & European Politics
A state election in eastern Germany has become a revealing test of the changing political landscapes of Germany and Europe, writes Jiang Feng, Professor and Chairman of the Council of the Shanghai Academy of Global Governance and Area Studies (SAGGAS) at Shanghai International Studies University. His analysis follows the decisive victory of the Alternative for Germany (AfD) (which has been classified as right-wing extremist by German authorities)in the state of Saxony-Anhalt on 6 September, in which it finished far ahead of its mainstream rivals. Jiang previously served as Minister-Counsellor at the Chinese Embassy in Berlin. The following article was published on 8 September 2026 on huanqiu.com, the online platform of the Global Times. On 6 September, the results of the state election in Saxony-Anhalt, Germany, were announced. The Alternative for Germany (AfD), classified as far-right by German authorities, made history by becoming the largest party in the state parliament, winning 43.8 per cent of the vote — twice its share in the previous election. The Christian Democratic Union (CDU), which had governed the state continuously for 24 years, won just 17.2 per cent, its worst result ever in Saxony-Anhalt. On the night the results were announced, the atmosphere at the CDU gathering was unusually calm. There was neither shock nor argument, as if the defeat had long been expected. Several veteran party members who had spent years working in the state government said: “Defeat is not a bad thing. It is time to make changes.” This state election has not only upended Saxony-Anhalt’s political landscape, but also laid bare the deep tensions between Germany’s traditional party structure and model of governance, on the one hand, and an increasingly polarised society on the other. Its repercussions are already being felt at the federal level, making Saxony-Anhalt a useful case study of the broader trend towards political polarisation and realignment in Europe. Governing Difficulties after Electoral Victory The most immediate consequence of the election is a historic setback for the mainstream party order that took shape in post-war Germany. In Saxony-Anhalt, the AfD has leapt from a peripheral party to the largest political force in the state. Its electoral base has expanded beyond the traditional category of “marginal protest voters” to take on the characteristics of a cross-class coalition. The party has not only consolidated its support in rural areas, but also attracted many middle-class voters and even members of the social elite with stable jobs, their own homes, and substantial incomes. It has thus evolved from a “protest party” into one with the potential to govern. Despite its commanding lead in the vote, however, the AfD faces an institutional obstacle to governing the state: the mainstream parties’ long-standing “firewall” against it. Neither of the two potential routes to forming a government appears likely to break the current political deadlock. The first would be a coalition of establishment parties, led by the CDU and bringing together the Social Democratic Party (SPD), the Greens, the Left Party (Die Linke) and the Sahra Wagenknecht Alliance (BSW) in a cross-camp government. In terms of parliamentary arithmetic, such a coalition could prevent the AfD from forming a government and preserve the outward stability of the traditional political order. Yet these parties are fundamentally divided over key issues including immigration, the energy transition, economic management, and cultural and education policy. Coalition negotiations would therefore be extremely difficult, and even if a government could be formed, it would most likely prove short-lived. More importantly, an alliance of establishment parties aimed at keeping the largest party out of government would play directly into the AfD’s narrative that “political elites are suppressing public opinion”. It could deepen perceptions of political unfairness, further strengthening the AfD’s political capital, and creating a dynamic in which “the more it is suppressed, the more people vote for it”. Ulrich Siegmund, the AfD’s candidate for state premier, has said that if efforts to form a government fail because other parties refuse to cooperate, the AfD will push for a fresh election, which he believes could deliver the party an absolute majority of seats. This points to more intense political battles ahead. The second option would be a coalition between the AfD and the BSW. Together, the two parties would command a simple majority in parliament, making this, on paper, the quickest route to forming a government. The BSW is the only elected party that has not ruled out cooperation with the AfD, and the two parties share some common ground, including on policy towards Russia. There is therefore a degree of political basis for cooperation. Were such a coalition to materialise, Germany would see its first state government jointly formed by a party defined as far-right and one with a far-left background, creating what might be called a “bipolar anti-establishment alliance”. Such an outcome would fundamentally break with the ideological boundaries of post-war German party politics. It is worth noting that even if the AfD ultimately fails to enter the state government, its roughly 47 per cent share of parliamentary seats would give it a powerful blocking minority. Without its consent, major decisions requiring a two-thirds majority — including constitutional amendments, significant budgetary adjustments, and state-level institutional reforms — would be extremely difficult to pass. Therefore, whoever ultimately forms the government, the AfD will be an unavoidable force in Saxony-Anhalt politics, with a direct influence on the state’s legislative process. Systemic Failures in Germany’s Governance Model The Saxony-Anhalt election result reflects a systemic failure of Germany’s post-war mainstream-party model of governance to adapt to rapidly changing socioeconomic conditions. It stems from multiple, mutually reinforcing structural tensions and highlights the existing political system’s difficulty in adapting to “an increasingly polarised society First, collective anxiety has replaced individual material hardship as a central driver of political mobilisation. The rise of the AfD can no longer be explained simply by poverty or social marginalisation. Its increasingly cross-class electoral base suggests that what is driving voters towards the party is, above all, concern about the broader direction of society. This anxiety about the future of the political community goes beyond individual gains and losses. In political discourse, economic anxiety has become closely intertwined with immigration, while immigration and refugee issues are, in essence, questions of social fairness. This perception turns conflicts over the distribution of social resources into negative assessments of governing parties, providing a broad social basis for far-right political narratives. Second, regional disparities and East German identity have undermined the strategy of addressing eastern Germany’s structural challenges at the regional level. More than three decades after German reunification, eastern states such as Saxony-Anhalt have experienced periods of economic growth, but their underlying economic structures remain weak, and household incomes and wealth remain significantly below those in western Germany. At the same time, they continue to face population outflow, an ageing population, labour shortages, and other structural challenges. At a deeper level, historical experiences — including the collapse of the former East German economic system, mass unemployment during the transition, and the westward shift of decision-making power over major issues — have left some residents with a sense of being “second-class citizens” and of being excluded. For years, the German government treated the “syndrome” of reunification as a regional problem to be gradually addressed at the local level. That approach is becoming increasingly unsustainable, as regional development disparities emerge as a core structural factor shaping national politics. Third, the erosion of institutional trust is perhaps the most decisive factor. AfD supporters tend to distrust establishment institutions, including parliament, government, and the mainstream media. Their concerns about economic security, pensions, and social fairness are significantly greater than the social average. Increasingly, their support for the AfD reflects not an expectation that the existing system can be improved, but a search for an alternative to the current political order. Such a systemic deficit of trust will be extremely difficult for the traditional parties to repair in the short term. Fourth, a generational shift in political mobilisation has amplified political polarisation. Unlike traditional parties, which rely heavily on offline rallies and mainstream media coverage, the AfD has developed a social-media mobilisation strategy built around “raising an issue — identifying who is responsible — offering a simplified solution — building a shared identity”. It turns complex social tensions into concise political narratives, rapidly channelling public sentiment into political support. The contrast on the eve of the election was particularly telling. The establishment parties, together with trade unions and churches, organised an offline march attended by more than 10,000 people, but its reach was largely confined to those present and to traditional media coverage. The AfD held a much smaller indoor event, yet livestreaming on TikTok, YouTube, and other platforms, combined with the involvement of online influencers, gave it a reach and mobilising capacity far beyond that of the march. The contrast illustrates how the traditional parties’ methods of political mobilisation are increasingly struggling to keep pace with a political environment transformed by changes in media technology. A Microcosm of Structural Political Change in Europe The shockwaves from the Saxony-Anhalt election quickly travelled beyond the state to the federal level. Calls for political accountability followed immediately after the results were announced. The governing CDU and SPD are now under enormous pressure, while Chancellor Friedrich Merz and Vice Chancellor Lars Klingbeil face an unprecedented test. Political polarisation in Germany is no longer simply a regional phenomenon. The post-war model of multiparty government by establishment parties is breaking down and being reshaped. Viewed in a broader European context, the Saxony-Anhalt election is part of a continent-wide wave of party polarisation, mainstream-party decline, and rising right-wing forces. Far from an isolated phenomenon, it is a microcosm of the structural political changes unfolding across Europe. Weak economic growth, cultural tensions over immigration, and declining trust in institutions are fuelling the rise of right-wing forces in several countries, challenging the liberal internationalist order established in post-war Europe. As a core member state of the European Union, Germany’s ability to adapt its political system and the direction of its politics will have profound implications for both European integration and the evolution of the international order. Subscribe [ Pekingnology China’s Germany watchers take stock of Berlin’s uneasy turn On 7 December 2025, nearly 50 Chinese scholars and policy researchers gathered in Beijing for the 2025年德国形势年终研讨会 “2025 Year-End Seminar on the Situation in Germany… Read more 9 months ago · 31 likes · 1 comment · YIRUI LI and Yuxuan JIA ](https://www.pekingnology.com/p/chinas-germany-watchers-take-stock?utm_source=substack&utm_campaign=post_embed&utm_medium=web&embedding_publication_id=1151841) [ Jiang Feng on Germany's 2025 and beyond: no easy exit ](https://www.eastisread.com/p/jiang-feng-on-germanys-2025-and-beyond) Yirui LI and Yuxuan JIA · Jan 24 The following is an op-ed by Jiang Feng, published on 29 December 2025 at Shanghai Observer 上观新闻, the digital platform of Jiefang Daily, the official newspaper of the Shanghai Municipal Committee of the Communist Party of China (CPC). [ Read full story ](https://www.eastisread.com/p/jiang-feng-on-germanys-2025-and-beyond)
Homewood Science Center’s Walk Walton tickets on sale
Tickets are on sale for Homewood Science Center’s 2026 Walk Walton nature fest fundraiser on Oct. 18 at the Izaak Walton Preserve.
Fed’s Goolsbee says road to 2% inflation may not be painless
Federal Reserve Bank of Chicago President Austan Goolsbee warned the central bank cannot ignore repeated and persistent supply shocks, and must respond in a way that may cause economic hardship.
Most firms keep cash from tariff refunds, Fed study finds
The bulk of companies receiving billions in tariff refunds are mostly holding on to the cash, according to a survey released Monday by the Federal Reserve Bank of Atlanta. Of
Chargers place David Njoku, Charlie Kolar on injured reserve
The Chargers are placing TEs Charlie Kolar and David Njoku on injured reserve after Sunday’s loss.
One Lifelong Exercise Habit Is Linked to Healthier Signs of Aging After 55
Decades of exercise, greater reserve.