SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " volume " 233 found 🔀 AI-powered Shuffle
Isner Breaks Down Tennis’s Business Boom
Isner on Nothing Major joining The Volume and tennis's business boom.
Isner Breaks Down Tennis’s Business Boom
Isner on Nothing Major joining The Volume and tennis's business boom.
Universal Health Services (UHS) Stock Looks Undervalued As Shares Fell 29% YTD
Universal Health Services stock has slipped around 29.2% year to date, yet the valuation checks still lean toward the shares looking inexpensive on several fronts. This raises a clear question about whether the recent weakness lines up with the fundamentals. The roughly 29.2% decline year to date suggests sentiment has cooled sharply, even though longer term returns are less weak. For a healthcare operator like Universal Health Services, expectations around patient volumes and pricing can...
Ranking Members Markey, Velázquez Push to Roll Back Trump Administration’s Discriminatory SBA Lending Policy that Blocks Immigrant Entrepreneurs from Pursuing the American Dream
Bicameral resolution would rescind Trump administration policy banning green card holders from accessing SBA loans Resolution Text (PDF) | One-Pager (PDF) (Washington, July 23) – Ranking Member Edward J. Markey (D-Mass.) and House Small Business Committee Ranking Member Nydia M. Velázquez (D-NY-7) today introduced a Congressional Review Act (CRA) resolution to rescind the Trump administration’s policy that bans green card holders from accessing essential Small Business Administration (SBA) loans to start and grow their businesses and invest in Main Streets nationwide. Trump’s SBA restrictions buck decades of precedent, attacking immigrant small business owners who are lawfully in the U.S. with no justification. The Trump administration’s green card holder ban is the most recent escalation of SBA’s draconian citizenship restrictions that are killing jobs and putting the American Dream further out of reach for entrepreneurs. In Fiscal Year 2025, the SBA made an estimated $5.7 billion in loans to green card holders, which supported more than 80,000 American jobs. Ranking Member Markey’s introduction of the CRA resolution follows his introduction of the Investing in the American Dream Act alongside Ranking Member Velázquez earlier this year. The Investing in the American Dream Act would roll back the SBA’s draconian lending restrictions and restore previous SBA lending policies for immigrant entrepreneurs lawfully in the U.S., including green card holders, refugees, and asylees. More than 100 organizations have called for the passage of the legislation and over 60 Massachusetts state legislators have raised concerns about the impact of the citizenship restrictions in their local communities. “Once again, Donald Trump is shutting hardworking immigrants out of the American Dream with his discriminatory and dangerous policies, fear tactics, and violent rhetoric. The anti-small business lending requirements implemented by Trump’s SBA won’t Make America Great Again—they are Making America Hate Again,” said Ranking Member Markey. “I am fighting every single day to roll back Trump’s brazen attempt to steal the American Dream from entrepreneurs in Massachusetts and across the country who enrich our communities, strengthen our Main Streets, and create jobs in the United States.” “Starting and owning your own business is one of the pillars of the American Dream. Under the Trump Administration, the SBA has sought to deny immigrant small business owners and entrepreneurs that dream by preventing them from accessing the capital they need to grow and scale their businesses. Not only is this policy cruel, but it is also self-defeating and holds our country back economically. As Ranking Member of the House Small Business Committee, I will do everything in my power to reverse this terrible policy,” said Ranking Member Velázquez. Massachusetts state legislators applauded Ranking Member Markey’s actions and emphasized the critical contributions of green card holders to Bay State communities and the Commonwealth’s economy. "Green card holders are our neighbors, workers, entrepreneurs, and taxpayers,” said Massachusetts State Senator Adam Gómez (D-Springfield), Senate Chair of the Joint Committee on Community Development and Small Businesses. “They open restaurants, launch small businesses, create jobs, and contribute every day to the economic strength of Massachusetts. Denying lawful permanent residents access to SBA loan programs doesn't make our economy stronger—it makes it harder for small businesses to succeed. I support this resolution because opportunity should never be limited by unnecessary barriers that prevent hardworking people from investing in their communities and pursuing the American dream." “Senator Markey’s CRA Resolution provides a valuable moment for our federal leaders to show their commitment to small businesses and the American Dream,” said Massachusetts State Representative Andy X. Vargas (D-Haverhill), House Chair of the Joint Committee on Community Development and Small Businesses. “The SBA’s recent policy restricting lawful residents from accessing the popular 7(a) and 504 programs has shut out some of the most entrepreneurial and hard-working members of our community from much-need capital. In Massachusetts, these programs have invested millions of dollars into small businesses owned by green card holders, supporting thousands of jobs. This should not be a partisan issue. People who worked hard, have legal status, and contribute so much to their communities via employment and economic impact don’t deserve to be in the crosshairs for political purposes. The Senator’s resolution is a step forward in restoring access to the American Dream that small business owners across the country deserve.” Several small business advocates and stakeholders voiced their support for Ranking Member Markey’s efforts to roll back Trump SBA’s discriminatory lending rules. “Immigrant-owned businesses are the foundation of the American economy. They power our neighborhoods, provide essential services, and employ our loved ones. Yet, systemic hurdles like the Small Business Administration’s citizenship restrictions unfairly block their path to prosperity," said Elizabeth Sweet, Executive Director of the Massachusetts Immigrant and Refugee Advocacy (MIRA) Coalition. "We applaud Senator Markey’s continued leadership and look forward to a future where immigrant entrepreneurs can share their ingenuity without arbitrary restrictions that hold us all back.” “Independent restaurants have always been built by people willing to work hard, take risks, and invest in their communities. When lawfully authorized entrepreneurs lose access to the financing they need to start or grow a business, we all lose. These are the businesses creating jobs, filling storefronts, and strengthening our neighborhoods. Access to capital should help good businesses succeed, and that’s exactly what restoring these SBA loan programs would do,” said Jen Ziskin, Executive Director of Massachusetts Restaurants United. “At the Latino Economic Development Corporation, we see firsthand that access to capital transforms lives, creates jobs, and strengthens neighborhoods. Many of the entrepreneurs we serve are lawful permanent residents who have invested their savings, opened businesses, and employ local residents. Restricting access to SBA financing doesn’t just impact business owners, it limits economic opportunity for entire communities. Main Street succeeds when every qualified entrepreneur has a fair chance to grow,” said Andrew Melendez, CEO and Founder of the Latino Economic Development Corporation. "Immigrants and immigrant-owned businesses are the heart and soul of small business communities in cities and towns throughout the Commonwealth, and across America. Limiting access to these SBA loans not only sends the wrong message about immigration, it will have significant negative economic impact on our small business ecosystem,” said Keith Mahoney, Vice President of Public Affairs at the Boston Foundation. “The SBA’s recent policy changes that prevent Legal Permanent Residents, and other non-citizens from participating in any of the SBA’s valuable programs are changes that are unwelcome, immoral, and antithetical to our purpose, our mission, and our vision for Massachusetts communities and businesses. Immigrant entrepreneurs and others have expressed concern that Common Capital will ‘report them to ICE,’ so loan demand has decreased. There is no valid reason for excluding Legal Permanent Residents and other noncitizens who are lawfully present in the U.S. from accessing the SBA’s programs. Immigrant entrepreneurs start businesses, they create jobs, they support their families and their communities. Our government should be in the business of encouraging their full participation in our economy,” said Raymond Lanza-Weil, President of Common Capital. "ECCHO-Latino now represents over 400 educators and 300 microbusinesses across Massachusetts, where immigrants make up 60% of the childcare workforce. When a green card holder is ready to grow her business—from expanding her home child care to opening a center—she shouldn't be turned away by local banks simply because of federal citizenship rules. Blocking access to SBA loans kills opportunity and deepens our state's childcare crisis. ECCHO-Latino strongly supports Senator Markey and Representative Velázquez in passing this resolution to put Main Street first," said Harold Antonio Blanco, Co-Founder & Executive Director of ECCHO-Latino Inc. "This is exactly how political ideology ruins an economy. Washington has taken lawful, tax-paying entrepreneurs who live in our communities, invest in America, and hire American workers, and declared their businesses ineligible for critical financing simply because a green card holder owns even a fraction of the company. Using policies ostensibly aimed at illegal immigration to punish lawful permanent residents is nothing short of ideological overreach and economic self-sabotage. The SBA exists to help viable small businesses grow, rather than imposing nativist tests that ignore an entrepreneur’s credit history, business plan, or ability to create jobs. When the federal government closes the door on qualified entrepreneurs, they’re also closing the door on American entrepreneurship and on American workers, while handing future companies, jobs, innovation, and investment to our competitors. America should be competing to attract people who want to invest and build here, not creating arbitrary barriers that drive their talent and capital elsewhere,” said Javier Palomarez, President and CEO of the United States Hispanic Business Council (USHBC). "The U.S. Small Business Administration's decision to prohibit legal permanent residents, including green card holders, from accessing SBA-backed loans has the potential for disastrous consequences that could reverberate throughout America's economy for years to come. After all, immigrants are twice as likely to start small businesses as U.S.-born individuals. Congress must overturn rules requiring the SBA to block legal permanent residents from accessing lending resources because so many of the entrepreneurs who drive job creation in this country were born outside the United States," said John Arensemeyer, Founder and CEO of Small Business Majority. “NCRC supports the Congressional Review Act resolution to overturn SBA’s citizenship restrictions that bar green-card holders from receiving the 7(a) and 504 loans. When qualified entrepreneurs are denied access to SBA loans, all of Main Street gets hurt. Communities lose jobs. Neighborhoods lose services. Local economies lose the opportunity to build wealth and shrink disparities,” said Jesse Van Tol, President & CEO of the National Community Reinvestment Coalition (NCRC). “We cannot afford to have the American Dream out of reach for hard-working, immigrant small business owners.” “Asian Americans and Asian immigrants have been integral in building local economies. They create businesses, jobs, and opportunities in communities across the country that benefit everyone. Lawful permanent residents pay taxes, invest in their communities, and strengthen Main Street, yet the SBA's discriminatory citizenship restrictions unfairly deny them access to the same tools that help small businesses grow and succeed. We applaud congressional leaders for advancing this resolution to overturn the latest restrictions on SBA lending for green card holders, and we urge lawmakers to also pass the Investing in the American Dream Act to fully restore access to SBA loan programs for all eligible people in the United States. Ensuring that immigrant-owned small businesses have a fair opportunity to access capital is essential to building a stronger, more inclusive economy that works for all,” said Joanna Derman, Director of Anti-Profiling, Civil Rights and National Security at Asian Americans Advancing Justice (AAJC). "Immigrant-owned businesses often turn to SBA 7(a) and 504 loans because they face higher denial rates from traditional lenders,” said Imani Augustus, Director of the Center for Entrepreneurial Opportunity. "These programs provide the capital they need to expand operations, hire workers, and invest in their businesses. Reversing the ban on lawful permanent residents is a critical first step toward ensuring these financing tools are accessible to everyone strengthening their communities through entrepreneurship. We applaud this action and urge Congress to fully restore access by passing the Investing in the American Dream Act.” "Last year, nearly 5,700 SBA loans worth $5.7 billion went to businesses owned by green card holders, supporting more than 80,000 jobs. These are entrepreneurs who have put down roots here, hired their neighbors, and invested in the communities they call home. Barring them from capital doesn't protect Main Street—it starves it. What should matter is the strength of a business and its potential to grow, not the immigration status of its owner. This resolution doesn’t eliminate all the citizenship restrictions in SBA’s policy change, but it’s a step toward restoring a commonsense principle that stood for more than 30 years," said Howard Wial, Director of Research at ICIC. "I'm encouraged to see Congress moving to reopen access to capital for green card holders, a key tool for small business survival. Green card holders accounted for an estimated 5,700 SBA loans in Fiscal Year 2025, worth $5.7 billion and supporting more than 80,000 jobs across the country. That capital is often what keeps a business operating through its toughest stretches when cash flow gets tight. When qualified entrepreneurs lose access to that capital over their immigration status rather than their ability to repay a loan, it's the local economy that pays the price,” said Small Business for America's Future Co-Chair Shaundell Newsome, Founder of Sumnu Marketing. “Small businesses are the backbone of the American economy, and entrepreneurs —including green card holders — take risks every day to build businesses, create jobs, and strengthen communities. SBA loan programs should be administered with clear, consistent standards that safeguard public resources while ensuring these programs remain focused on supporting eligible entrepreneurs and job creators. This resolution responds to the opportunity to support all entrepreneurs and preserve the integrity of federally supported lending programs. We applaud the introduction of this resolution and remain committed to policies that strengthen small businesses, promote economic growth, and maintain confidence in these vital lending programs,” said Carolina Martinez, CEO of CAMEO Network. “National CAPACD wholeheartedly supports the introduction of this resolution aimed at overturning the SBA's misguided policy prohibiting immigrants from accessing the 7(a) and 504 loan programs. As a coalition, we are committed to creating systems, organizations, and societies that are fair and just. We believe we and our economy are stronger when we uplift our rich and diverse communities. Access to capital helps small businesses create jobs, build wealth, and strengthen neighborhoods. Restoring this pathway is an important first step toward ensuring immigrant entrepreneurs can continue to grow their businesses and contribute positively to our economy as a whole. We urge Congress to build on this momentum by passing the Investing in the American Dream Act, which would fully restore fair access to safe and affordable credit and uphold our commitment to a fair economy that works for everyone,” said Seema Agnani, CEO of National CAPACD. Ranking Member Markey is fighting for small business owners and immigrants that rely on SBA loans to start and run their businesses, create jobs, and contribute to their communities. In May, Ranking Member Markey highlighted the significant contributions of immigrant entrepreneurs in Massachusetts and across the country and condemned the Trump administration’s repeated attacks on immigrant communities at a Small Business Committee hearing. MIRA’s Elizabeth Sweet, who participated in Ranking Member Markey’s listening session earlier in May, provided testimony at the hearing. Also in May, Ranking Member Markey hosted a listening session at the Urban College of Boston to hear directly from several Massachusetts immigrant small business owners, lenders, and chambers of commerce how President Trump’s cruel and callous anti-immigrant policies are hurting Main Streets in the Bay State. Earlier in May, Ranking Member Markey hosted a press conference alongside Ranking Member Velázquez, Democratic lawmakers, and stakeholders to condemn the Trump administration’s harmful anti-immigrant lending policies and to introduce the Investing in the American Dream Act. In March, Ranking Member Markey released a comprehensive report detailing the harms to small business owners, workers, and consumers caused by the Trump administration’s ICE raids in communities across the country. In February, Ranking Member Markey introduced the Small Business ICE Disruption Fund Act, which would provide grants to small businesses that have been impacted by the Trump administration’s violent immigration enforcement actions on Main Streets across the United States. Earlier in February, Ranking Member Markey, Ranking Member Velázquez, Congressional Black Caucus Chair Yvette Clarke (D-N.Y.), Congressional Hispanic Caucus Chair Adriano Espaillat (D-N.Y.), and Congressional Asian Pacific American Caucus Chair Grace Meng (D-N.Y.) sent a letter urging the SBA to rescind their lending rule change that bars legal permanent residents from receiving SBA loans. Previously, Ranking Members Markey and Velázquez released a statement condemning the actions of the SBA after it announced that small businesses with legal permanent residents will be barred from receiving SBA loans. In December 2025, Ranking Member Markey and all Democratic members of the Senate Small Business Committee sent a letter to the SBA reiterating concerns with the SBA’s citizenship requirements and highlighting a drop in SBA lending volume. In September 2025, Ranking Member Markey heard directly from SBA lenders about the issues with the citizenship verification requirements. In July 2025, Ranking Members Markey and Velázquez sent a letter to the SBA expressing serious concerns with the agency’s new, draconian citizenship verification requirements that require small businesses seeking SBA loans to be 100% owned by U.S. citizens, nationals, and legal permanent residents. SBA has not responded to the letter. ###
Failure to rescue after TAVR: New study tracks outcomes at high- and low-volume hospitals
High-volume hospitals are often associated with better TAVR outcomes. The team behind this new study wanted to see if a similar trend was seen with FTR rates as well.
AMD’s Zen 6 EPYC Venice Pictured as a 256-Core Monster, Massive Twin I/O Dies & First 2nm HPC Chip To Enter Volume Ramp
AMD has showcased its next-generation EPYC Venice CPU at the Advancing AI event, featuring a phenomenal core count of 256 based on Zen 6.
Flutter Entertainment Stock Falls as Rising Prediction Market Volumes Pressure Traditional Gambling
Flutter Entertainment stock drops nearly 4% as rising prediction market volumes from platforms like Kalshi pressure traditional sportsbooks.
Heartflow launches new AI-powered staging tool for coronary plaque assessments
In addition to launching Heartflow Plaque Staging, the company also shared new data at SCCT2026 highlighting the importance of using total plaque volume assessments to diagnose and manage heart patients.
How the Iran war’s unpopularity compares to Iraq, Afghanistan and Vietnam
An increasing volume of data suggests the Iran war has become about as unpopular as Iraq and Vietnam ever were — and it became so much more quickly.
This Week: Muni 1 Bus Improvements, Car Free Happy Hour, SF Politics 101
Here is a list of events this week. Tuesday Park Presidio and California Evening Pop-Up. This SFMTA project aims to improve the Muni 1 California bus route from 33rd Avenue to Steiner Street. Come learn about it. Tuesday, July 21, 5:30-6:30 p.m., Corner of Park Presidio and California, S.F. Tuesday East Bay Car Free Happy Hour. Whether you’re car free, car light, car free curious, or just want to hang out with fun people and have nerdy urbanist conversations, everyone is welcome. Tuesday, July 21, 5:30-7 p.m., Drake’s Dealership, 2325 Broadway, Oakland. Wednesday SF Politics 101 with Joel Engardio. SF Politics 101 is an entertaining look at how local politics work and the history that shaped San Francisco — brought to life with visuals and narrative storytelling. Wednesday, July 22, 6-7:15 p.m., SPUR Urban Center, 654 Mission Street, S.F. Friday Woman and Non-Binary Morning Ride. Join the San Francisco Bicycle Coalition for a socially distanced bike ride for women and nonbinary cyclists. Friday, July 24, 7:15-8:45 a.m., McLaren Lodge, 501 Stanyan Street, S.F. Saturday Smart City Cycling 3 — Road Practice. In this class, you’ll go on a guided group ride to practice street-riding skills on increasingly high-volume streets. This class is the third in the Smart City Cycling sequence, and Smart City Cycling 2: Maneuvering is a prerequisite. Saturday, July 25, 10 a.m.-12 p.m., Arguello Extension, Arguello Blvd and Lincoln Way, S.F. Sunday Adult & Teen Learn-to-Ride Workshop. This three-hour workshop is for adults and teens who have not yet learned to ride a bike or would like a refresher on the basics of balancing, pedaling, and steering. Sunday, July 26, Alameda Waterfront Park, 2151 Ferry Point, Alameda. Got an event we should know about? Drop us a line.
988 Enters Its Fourth Year as Demand Grows and the Mental Health and Substance Use Landscape Shifts
Data as of March 2026 show that demand for 988 continues to rise, with the volume of calls, texts, and chats 15% higher than a year earlier and nearly 50% higher than two years ago. States are also answering more calls in-state, where counselors are more likely to be familiar with local resources.
Football brain health: Players more likely to suffer from depression and anxiety, study says
A new study finds evidence of reduced brain volume in former elite footballers, who also report difficulties with thinking skills and decision-making.
Kustom Entertainment Stock Short Interest Rises to 50.65%
Kustom Entertainment short interest was 50.65% of the float on June 30th, according to new data we received from Benzinga. Short interest totaled 317,435 shares, which was an increase of 180.01% from June 15th.It is estimated that it would take 1.0 days for short sellers to buy back their shares, with current trading volumes. Quiver Alerts Receive KUST Data Alerts Get market-moving
PSA: macOS 28 will drop support for encrypted Mac OS Extended volumes
Apple has announced that starting with macOS 28, users will need to decrypt or reformat certain storage volumes to keep using them.
The top selling sports cards in June as grading volume hit record highs
Basketball and baseball dominated the sports card market in June as grading backlogs start to raise concerns.
CMS seeks to cut $260M in imaging spending through ‘site-neutral’ reforms
The agency said it hopes to control “unnecessary” increases in the volume of clinic visit services furnished at certain off-campus hospital departments.
AI Forced Apple To Abandon Its Older, Slower Packaging, With The Upgrades Arriving To A20 Pro Making It Suitable To Handle Larger Data Volumes
A rumor claims that the slower packaging used on Apple’s older chipsets had to abandoned due to AI, with the A20 Pro bringing notable upgrades in this regard
How Flutter’s Removal from Key Russell Growth Indices Will Impact Flutter Entertainment (FLUT) Investors
In late June 2026, Flutter Entertainment plc (NYSE: FLUT) was removed from multiple Russell growth benchmarks, including the Russell 1000 Growth, Russell 3000 Growth, Russell Midcap Growth, Russell 3000E Growth, and Russell Small Cap Comp Growth indices. This broad index exclusion matters because it can prompt passive and index-tracking investors to sell shares, potentially amplifying trading volumes and sentiment shifts around Flutter’s stock. Next, we’ll examine how Flutter’s removal from...
Businesses Are Stuck in an Efficiency Illusion — Here's Why More Decks Don't Mean Better Decisions
In an AI-accelerated workplace where output is increasingly easy to generate, real professional value comes from judgment, restraint and clarity. Here's why professionals must move beyond volume-based execution and learn to deliver the strategic conviction leaders actually trust.
Apple's Foldable iPhone Push Gets Bigger
Suppliers reportedly preparing higher production volume.
Reflecting on a Year as Athlon Sports' Senior Golf Writer: Lessons from Golf's Stories
One year ago today, I officially began my run as Senior Golf Writer for Athlon Sports. By the time this opportunity arrived, I had already spent nearly three decades in golf as a PGA Professional, coach, educator, business owner, nonprofit founder and writer. The biggest lesson from my first year with Athlon Sports was not about deadlines, access or the volume of stories written.
Inside the SpaceX trading frenzy
SpaceX was expected to be one of the hottest stocks on Wall Street this year – and it has quickly delivered on that promise, shattering trading volume records while companies race to launch new products tied to the stock.
The Arts and Sciences of Judo: The New Edition Expands the Frontiers of Knowledge
The publication of Volume 6, Number 1 of "The Arts and Sciences of Judo" marks another important milestone in the development of judo research worldwide. As the International Judo Federation's interdisciplinary journal, under the supervision of Professor Sanda Čorak, it has become a recognised platform where science, education and the values of judo come together to deepen our understanding of the many dimensions of our sport. It also forms an integral part of the IJF Academy's mission to promote education, lifelong learning and the dissemination of knowledge throughout the global judo community.
Should “Success” in Science Be Measured Differently?
Publication volumes are one of the main ways that success is measured for researchers today. From mentorship to real-world impact, scientists argue that “publish or perish” pressures overlook many of the contributions that drive discovery forward.
Accel Entertainment (ACEL) Expands Louisiana Gaming Footprint Through Truck Stop Casino Acquisition
Accel Entertainment, Inc. (NYSE:ACEL) ranks among the best sin stocks to buy for recession protection. On June 3, Accel Entertainment, Inc. (NYSE:ACEL) strengthened its Louisiana business with the acquisition of Rice Palace Truck Stop Casino in Crowley, adding a high-volume gaming venue that expands the company’s route-based gaming network in another of its strongest growth […]
Monterey Motorsports Festival Announces 2026 Entertainment Lineup Headlined by Viral DJ Duo SIDEQUEST
/PRNewswire/ -- The Monterey Motorsports Festival is turning up the volume for Monterey Car Week 2026 with its biggest entertainment lineup to date, featuring...
Health services M&A is active in 2026, but uncertainty slows volume: PwC
Buyers are being more selective amid heightened policy and reimbursement pressure in healthcare, according to the analysis. Still, deal value is up compared to the first half of 2025.
Dartmouth Health reports $63.5 million deficit for first six months of fiscal year
Dartmouth Health faces a $62.5 million deficit due to weather-related closures and high costs, but sees increased patient volumes and revenues.
Tennessee Sports Betting Handle Holds Near $443M in May 2026 as Its Handle Tax Stays Flat
Tennessee took $443M in May 2026 sports bets at a 9.25% hold. As the only state taxing handle (1.85%) rather than revenue, its tax stays tied to volume. Full breakdown.
Traumatized: The New Politics of Public Suffering by Catherine Liu
Verso Review by Brian Tanguay Catherine Liu doesn’t write like your typical academic. This is what I noticed first about her latest book, Traumatized, a slender volume that delivers in clarity wha…
Pokémon News Weekly Roundup: Champions Free Gifts, Worlds Promos and PokémonXP Reveals
Welcome to your ‘other’ Pokémon News Weekly Round Up, volume 1! Each week I’ll round up the best Pokémon news (that isn’t Pokémon GO related) from around the globe and other games, and share it here. Pokémon Champions kicks off the Monthly Challenge Series starting with June 2026! This competition takes place Friday, June 26, […]
Record volume in SpaceX options shows stock casino open for business
A record-setting options debut suggests investors will trade SpaceX like other retail favorites Tesla and Nvidia.
Why Marketing Feels Harder as Your Business Grows by Nathan Tayloe
At some point, most growing businesses hit the same moment. What used to feel straightforward starts to feel more complicated. Marketing takes more effort. Results feel less predictable. What once worked consistently begins delivering mixed outcomes. It is easy to assume something is broken. In many cases, nothing is. The business has simply reached a different stage. What Worked Before Starts to Lose Its Edge Early on, growth is often driven by a few things working well at the same time: Referrals are strong The value of the offering is clear The team is aligned Decisions are made quickly Marketing, in that stage, tends to feel easier because the business itself is easier to understand. As the company grows, that simplicity fades. The audience expands. Services evolve. New people join the team. More channels are added. More decisions are made across more touchpoints. Marketing is no longer communicating one clear story. It is trying to represent a more complex business. Complexity Creates Friction That added complexity does not always show up immediately. It builds over time. Messaging starts to drift. Different parts of the business describe what they do in slightly different ways. The website no longer reflects how the company actually operates. Sales conversations evolve faster than the brand. At the same time, more activity is introduced to try to keep growth moving: New campaigns More content Additional platforms More tools and reporting The volume increases. The clarity does not always keep pace. That is when marketing starts to feel harder. It’s Not a Lack of Effort Most teams respond to this stage by doing more. More output More meetings More adjustments More experimentation That effort is not misplaced. It is often pointed in the wrong direction. When the underlying issue is a lack of alignment, more activity tends to create more noise. Results become harder to interpret. Decisions take longer. Progress feels inconsistent. From the outside, everything looks active. From the inside, it feels less certain. The Real Shift As businesses grow, marketing becomes less about execution and more about alignment. The companies that navigate this transition well tend to refocus on a few fundamentals: A clearly defined audience A strong, consistent position in the market Messaging that reflects how the business actually operates Alignment between leadership, marketing, and sales When those elements are in place, execution becomes more effective again. Marketing does not necessarily become easier, but it becomes more consistent. A Different Kind of Discipline Growth introduces more opportunity, but it also demands more discipline. What worked when the business was smaller often cannot be scaled without adjustment. The systems, messaging, and decision-making that once felt intuitive need to become more intentional. That is not a sign of failure. It is a normal part of growth. Marketing feels harder because the business has become more complex. The solution is not to outwork that complexity. It is to bring clarity to it. The companies that do that well tend to regain momentum quickly. Those who do not often stay busy without seeing the same level of progress. — Learn more about how we help organizations align strategy, brand, and execution. Visit tayloegray.com, or reach out directly at nathan@tayloegray.com.
Is SMIC N+3’s Metal Pitch Smaller than Intel 18A’s?
Almost four years ago, we published that SMIC had started shipping 7 nm (N+1) chips. Now, SMIC is shipping its third-generation 7 nm (N+3) process in Huawei’s Kirin 9030, with a minimum metal pitch of 32.5 nm, about 10% tighter than the 36 nm minimum metal pitch shipping in Intel’s latest Panther Lake CPUs on 18A. The headline is true, but incomplete cherry picked metric. N+3 reaches the density of TSMC N6 through aggressive DUV multi-patterning and design-technology co-optimization (DTCO), but it pays for that in complexity, efficiency and process control. We found this and more in our reverse engineering and teardown where we cover SMIC’s N3 process technology, Huawei’s packaging, memory, architecture, and more. SemiAnalysis has been building a state-of-the-art teardown lab in Oregon capable of analyzing the world’s most advanced and important chips over the last year and half. We have already generated revenue on advanced datacenter chip teardowns including our recent reverse engineering of a major TSMC customer’s COUPE CPO optical engine + EIC 3D stack. This is the first public report from the SemiAnalysis Teardown Engineering & Evaluation Lab, or STEEL for short. The lab is aggressively scaling up and out and we’re excited to announce it publicly. This is a bit of inconvenient timing for TechInsights as they are private equity owned and currently being sold while having enjoyed virtually no credible competition for decades. This has led to TechInsights underinvesting in CAPEX. SemiAnalysis exceeds TechInsights in revenue despite no venture or private equity ownership and being founded only 6 years ago. Because we have no external investors and are founder led, we move faster, build faster, and we can release client chip teardowns for free regularly, while focusing on datacenter for our major clients. Here’s the first public image from our lab, the HiSilicon Kirin 9030 Pro SoC: This report will detail our teardown of the Kirin 9030 and our findings on SMIC’s N+3 process, the most advanced in China. For comparison, we’ll show our teardown of the MediaTek Helio G99, made on TSMC N6. Through this comparison, we can look at the effect of export controls – SMIC N+3 and TSMC N6 are comparable nodes, but one is heavily export-controlled, the other free to use the West’s most advanced equipment. Here we see both China’s progress and constraints. SMIC N+3 reaches TSMC N6-class logic density, but it requires far more aggressive DUV multi-patterning, so it does not match N6 on process maturity or cost. The Kirin 9030 Pro performs similarly to three-year-old Android flagships, and trails far behind the current flagship SoCs from Apple, Qualcomm, MediaTek, and Samsung. The efficiency gap is even wider. Export controls have not stopped Huawei and SMIC from shipping advanced silicon, but they have forced a different path. Without EUV, SMIC is leaning harder on DUV multi-patterning, DTCO, and increasingly complex integration. The roadmap continues forward through tighter design rules and backside power, but each step adds cost and process risk. Huawei’s τ scaling and LogicFolding show another path: stacking active logic and recovering density through advanced packaging and system-technology co-optimization (STCO). To understand the Kirin 9030, we must first understand Huawei’s SoC history. HiSilicon is Huawei’s chip design arm, responsible for the Kirin smartphone SoCs, Kunpeng server CPUs, Ascend AI accelerators, and switch/router networking silicon. Before export controls, Huawei was TSMC’s largest customer – the only customer on TSMC’s first EUV node, N7+, and among the first on N5, alongside Apple. That ended in late 2020. Huawei switched to Qualcomm SoCs in its flagship smartphones, though export controls limited them to 4G-only variants. In late 2023, Huawei returned to in-house silicon with the Kirin 9000s, a successor to the Kirin 9000, fabricated on SMIC N+2 instead of TSMC N5. In the following years, they released the Kirin 9010 and 9020 on the same N+2 process. These chips used Huawei’s in-house TaiShan CPU cores and Maleoon GPU. We have not torn down a Kirin 9020 ourselves, so the predecessor die shot is from Kurnal. The die shots show how Huawei spent its silicon budget: which functional blocks are where, and how their areas compare to the predecessor. First, a quick guide to the major blocks on the die. The total die area is nearly identical, but the 9030 uses that area more aggressively. A denser process lets Huawei fit an extra middle CPU core, more GPU and NPU cores, and larger caches into the same footprint. In contrast, the Helio G99 is a much smaller, low-cost SoC, built for budget smartphones rather than a flagship device. While the Kirin 9030 is ~140 mm², the G99 is only ~29 mm², roughly one-fifth the area. The underlying TSMC process technology, however, is directly comparable as a baseline for analyzing SMIC’s. The Kirin 9030 is an evolutionary refresh, not a clean-sheet design. Its CPU, GPU and NPU cores carry over the 9020’s families, and the gains come from three levers: the SMIC N+2-to-N+3 process step, DTCO and floorplan work, and incremental microarchitecture. Area is where the first two show up, and the 9030 scales well here. Performance and efficiency are the harder test. Huawei’s design holds up better than its node would suggest, but the chip still trails, both because N+3 sits behind the leading-edge nodes and because its cores, while competent, remain a few generations behind the newest designs. The new prime core is an incremental update. The main changes are a 10% frequency increase from 2.5 GHz to 2.75 GHz and a doubling in the L2 cache from 1 MiB to 2 MiB. Despite the increased cache, the core size decreased by 7.6%. Excluding the private L2 cache, the core size decreased by 21%. This is a large reduction for an incremental node. Compared with the TaiShan New V120 core in the Kirin 9020, the Kirin 9030’s middle core is almost unchanged architecturally, yet each core shrinks by ~22%. Most of that comes from the move from N+2 to N+3, with layout likely accounting for the rest. Visually, the most noticeable change is the increase from 3 middle cores to 4. There is also a 20% increase in the shared L3 cache of the big cluster. This helps to improve multi-core performance without sacrificing much in terms of area. Even with each core shrinking, the big CPU cluster’s total area is essentially unchanged. The per-core savings went back into an additional middle core and larger caches. The tiny cores shrank less than the prime core (excluding its L2 cache) and less than the middle cores. This is likely because fixed overhead is a larger share on a small core. We cannot resolve any architectural changes from the die shot alone, but the per-clock and efficiency gains shown below point to more than pure process and layout scaling. The area reduction was offset by a doubling of the shared L2 cache from 2 MiB to 4 MiB, leaving the total tiny CPU cluster area slightly larger. Area is the easiest improvement to see from a die shot, but it is only one part of PPA (power, performance, area). For modern logic, power and performance matter just as much, and often more. Since Dennard scaling broke down in the mid-2000s, voltage and frequency have not scaled in step with transistor dimensions, so each node has had to fight harder for gains in performance and efficiency. The starkest comparison is not Kirin 9020 versus Kirin 9030 Pro. Apple’s efficiency cores run circles around Huawei’s prime core. Apple’s low-power core delivers 20% higher integer performance while drawing only 1 W, compared with 4.5 W for Huawei’s prime core. N+3 matches TSMC N6, but N6 is several generations old. Apple and Qualcomm build on N4 and N3P, which are denser and sit on a better voltage-frequency curve, giving them a larger transistor budget and more performance per watt. The 9030’s own cores did improve. The middle and tiny cores gained 17% and 14% in per-clock integer performance over the 9020, with floating-point flat on the middle core and up 11% on the tiny. The tiny core improves cleanly, with performance rising while power falls and efficiency increases by 45% in integer and 24% in floating point. The middle core is mixed: integer performance rises but power rises faster, cutting integer efficiency by 7%, while lower power lifts floating-point efficiency 16%. Per-clock gains at the same or lower frequency are microarchitectural, so the cores are tuned, not just shrunk. Both also failed to hold their rated maximum frequencies, pointing to thermal, power, or stability limits. Per clock, the middle core sits around Arm Cortex-A720 and the tiny core near the Cortex-A520; absolute performance trails because Huawei clocks them much lower. The prime core is roughly Cortex-X2 class per clock, a 2021 design. Apple’s 2020 M1 Firestorm core is still 35% higher per clock and 57% faster in absolute integer performance at a similar 4.5 W. The current leading edge is further ahead again: the Apple M5 P-core is 60% higher per clock and 2.7× faster, the Arm C1 Ultra 45% higher and 2× faster. Matching older high-end cores per clock is a genuine design achievement. What Huawei cannot match is the voltage-frequency curve and transistor budget of leading-edge nodes, which let Apple, Qualcomm and others spend more transistors in the same area on wider cores, larger caches and deeper buffers while running at lower voltage. Huawei’s LogicFolding roadmap is one answer, stacking active logic to recover density and shorten signal paths. We return to it later. The GPU compute units (CUs) changed more visibly than the CPU cores, moving to a more rectangular layout for both the arithmetic logic unit (ALU) clusters and the CU overall. Even with ray-tracing support added, a CU shrank ~28%. However, that shrink is offset by the increase from 4 to 6 CUs and the area outside the CUs grew 33%. Overall, the GPU cluster is larger by ~10%. The GPU is where Huawei makes its biggest gains. The Maleoon 935 is not competitive with current flagships, but it is a large step up from the 920 and reaches older-flagship territory. In 3DMark it is 70% faster in Wild Life Extreme (WLE) and 79% faster in Steel Nomad Light (SNL) than the 920; with 11% higher clocks and 50% more CUs, the ~67% theoretical uplift roughly matches WLE and is beaten by SNL. It edges ahead of the Snapdragon 8+ Gen 1 in WLE and SNL, and the Dimensity 9200 and Apple A16 in WLE, but stays far behind newer parts: the Snapdragon 8 Elite Gen 5 and Dimensity 9500 are ~2.4–2.6× faster in WLE and ~3.2× faster in SNL. The Maleoon 935 is Huawei’s first GPU with hardware-accelerated ray tracing; there it lands slightly ahead of the Exynos 2200, and on par with the Apple A16, with current flagships up to 3.7× faster. The Neural Processing Unit (NPU) saw the largest structural changes of any block, moving from a Lite and a Tiny core in the Kirin 9020 to a Lite and two Tiny cores in the Kirin 9030. Both core types also show significant layout changes. This is a reversal in Huawei’s NPU design. The Kirin 9000 5G, its last flagship chip on TSMC N5, used two Lite and one Tiny core. The series of SoCs on SMIC N+2 moved to one Lite and one Tiny core, likely for area savings. With the Kirin 9030, Huawei has shifted back toward a larger multi-core NPU cluster, but with the additional area going to a Tiny core rather than a Lite core. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Before diving into the process stack, the package and memory are worth separating from the SoC itself. The Pro variant of the Kirin 9030 carries 12 GB of Samsung DRAM, with two stacks of four dies each. The dies were identified as the K4L2E165YD, a 12 Gb LPDDR5X-9600 device fabricated on Samsung’s 1a node, the fourth generation of its 10 nm-class DRAM after 1x, 1y and 1z. 1a has shipped in volume since 2022, so this is current memory rather than older-node inventory. The 16 GB Pro Max variants we obtained were found with both CXMT and Samsung packages. The CXMT package is marked CXDD7JEDM, with two stacks of four dies, packaged in week 45 of 2025. The inferred die dimensions from X-ray computed tomography (CT) are consistent with a known density of ~0.3 Gib/mm² for the CXMT G4 process, roughly equivalent to other manufacturers’ 1z processes. The Kirin 9030 uses a typical integrated package-on-package (iPoP) stack: multiple DRAM dies in a memory package sit above an organic redistribution layer (RDL) interposer, which sits above the SoC and package substrate. The full package is then mounted to the printed circuit board (PCB) through ball-grid array (BGA) solder bumps. The memory package substrate is a thin bismaleimide-triazine (BT) laminate carrying the LPDDR5X stack. The organic RDL interposer over the SoC routes the PoP signals around the die and carries possible dummy thermal copper pillars. The package substrate, a thicker Ajinomoto Build-up Film (ABF) build-up over a BT core, fans the flip-chip bumps out to BGA pitch and embeds the power planes. The whole stack is organic. The only silicon is the SoC and the LPDDR5X dies; there is no silicon interposer. Keeping it all-organic brings the package’s coefficient of thermal expansion (CTE) close to the PCB’s, reducing board-level warpage, and avoids the cost of a silicon interposer the SoC’s bandwidth does not need. In an iPoP stack, the memory package connects to the organic RDL interposer through an array of solder bumps. Underfill fills the gap around those bumps, adding stiffness and protecting the joints from mechanical stress. The Pro and Pro Max variants differ here, which we cover behind the paywall. The die shot and architecture tell us how Huawei allocated its silicon budget. The process tells us what SMIC can manufacture. We use the Helio G99 as the process reference for TSMC N6. Both SMIC N+3 and TSMC N6 are evolutions of previous 7 nm-class nodes. We used targeted TEM cross-sections through logic and memory regions, imaged in both fin-cut and gate-cut directions. Each cross-section caption gives its horizontal field width (HFW), the real width of the imaged area. We start at the transistor fins, then move up through standard cells, local interconnect, and SRAM. SMIC has not overtaken Intel or TSMC. It uses aggressive DUV scaling and DTCO to reach N6-class density, but that density doesn’t translate into comparable performance and efficiency, for two reasons: the node gap to leading-edge nodes, and Huawei’s core designs. Fin Profile One of the most important knobs in a FinFET process is the fin profile: the shape of an individual fin and the channel where current passes from source to drain. The ideal fin is tall, narrow, and nearly vertical. A taller fin increases effective channel width, while a narrower fin improves electrostatic control by thinning the body the gate must control. Push either too far, and the process pays for it: weaker drive current, fragile fins, taper, footing and line-edge variation that hit yield and device variability. The Intel 22 nm, 14 nm, and 10 nm fin cross-sections show how FinFET nodes have improved over time. 22 nm fins were a first-generation structure, relatively short, wide and strongly tapered. The shape limits current density and reduces gate control uniformity across the height of the fin. At 14 nm and 10 nm, Intel pushed the fins taller and narrower while also making the sidewalls more vertical. Rather than shrinking the device, these changes increase the effective channel width per fin and improve electrostatic control. The trade-off is that taller fins at tighter pitches are much more difficult to manufacture. Now, let’s compare the Helio G99 on TSMC N6 with the Kirin 9030 on SMIC N+3. Both processes are in the same class, with fin pitch of 30-32 nm on N+3 and 34 nm in our N6 cross-section. The pitch for N6 is especially interesting as N7’s HD library is generally listed with a 33 nm fin pitch, and N6 did not shrink pitches directly. Its density gains came from DTCO instead of tighter pitches. The 34 nm pitch was stable across our sampled region and serves more as a comparison against the SMIC N+3 we have not investigated further. Pinning down N+3’s fin patterning scheme takes more than one core unit. The CPU cores show a dense ~32 nm pitch, with the pitch between N-P fin pairs alternating between 78 and 88 nm. Logic alone may be consistent with dual-pitch mandrels of 120 and 110 nm, but this is a complex and unusual approach. Combining the pitch from the the 8T SRAM, which has more complex repeat unit, with the CPU core sequence allows us to reverse engineer the patterning steps with more confidence. As both the logic and SRAM should share the same base grid, a single CD mandrel lithography pattern with 128 nm pitch undergoing SAQP produces a die-wide ~32 nm grid (128 nm/4), which supports the pitch sequencing seen in both logic and SRAM cells. In the sampled cross-sections, N+3 shows a taller, narrower, higher-aspect-ratio fin than N6. The measured fin aspect ratio is ~9.5:1 on N+3 versus 7.8:1 on N6. N+3 also shows less top rounding, with an estimated radius of ~2 nm, compared with 2.8 nm on N6. Even though the fin widths differ, the ratio of top rounding to fin width tells the same story, with N+3 at 0.37 and N6 at 0.44. In a geometric sense, lower is better; a perfectly rectangular fin would have no top-rounding penalty. These are single-digit-nanometer features measured from a handful of cuts, so treat the absolute numbers as approximate. The important result is the relative gap: N+3’s fins are consistently taller, narrower and less rounded than N6’s. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Standard Cell A standard cell is the basic building block of chip layout: a fixed-height row pairing one NMOS and one PMOS transistor that share a gate, tiled in a grid to build logic blocks. The key dimensions are contacted gate pitch (CGP), cell height (CH), fin count, and the lower-metal routing grid. To measure density, we use the Bohr metric: a weighted average of NAND2 gate area (60%) and scan flip-flop area (40%). This represents a realistic mix of combinational and sequential logic. This metric has its limitations, especially for complex cell layouts like TSMC’s FinFLEX, which alternates cells with different fin counts. Even so, it is the best metric for a pure process-level comparison. Another important measurement is the fin pitch; it refers to the distance between two fins of the same transistor. In a FinFET process, multiple fins are used in each transistor to increase the drive current and thus performance. TSMC N6 ships both a high-density (HD) library with 2 PMOS and 2 NMOS fins per cell, and a high-performance (HP) library with 3 of each. More fins under the shared gate mean more effective channel width. HP cells switch harder at the cost of area. Designers mix the two on a die, primarily spending HP cells on timing-critical paths, and matching their PPA targets. In the Cortex-A55 core of the Helio G99, we found a cell height of 240 nm for the HD cell. MediaTek has used HD cells in the G99 to minimize die size and thus cost. As an SoC for budget smartphones at ~$100, this is essential. By contrast, we found only one library in the Kirin 9030, with 2 NMOS and 2 PMOS fins. This suggests a narrower library strategy than TSMC N6, where both HD and HP libraries are widely used. This likely reflects the smaller customer base and the more constrained domestic design and electronic design automation (EDA) ecosystem. In all three CPU cores of the Kirin 9030, we found cell heights of 228 nm, 5% smaller than on N6. This is also a reduction of 9.5% over SMIC N+2’s cell height of 252 nm. SMIC N+3 and TSMC N6’s HD library both feature a CGP of 57 nm. For SMIC, this is a 9.5% shrink over N+2. In the past, CGP and cell height alone may have been enough to compare transistor density. Now, however, we must consider scaling boosters and DTCO as well. SMIC’s density gain does not come from EUV. It comes from using every available DTCO booster aggressively. First is fin depopulation: reducing the number of NMOS and PMOS fins in each cell. The first FinFET nodes started with 3 or 4 fins for each transistor. SMIC N+3 and TSMC N6 HD both use only 2 fins per transistor, trading drive strength for density. Next is contact over active gate (COAG). By landing the gate contact directly over the active gate, instead of out over the isolation region, the cell height drops. N+3 integrates COAG while N6 does not. Our N+3 gate-cut cross-sections indicate COAG, with the gate contact sitting over the active region, while N6 shows an off-gate contact. Last is single diffusion break (SDB). Diffusion breaks are inserted between cells in the same row to provide electrical isolation, but they also introduce local layout effects (LLE), layout-dependent shifts in electrical characteristics. In the past, a double diffusion break was used, consuming the space of two CGPs. SMIC N+3 and TSMC N6 instead use SDB, saving area but increasing LLE sensitivity. This must be controlled at the process level and accurately modeled in the process design kit (PDK) so that EDA tools can account for it. Overall, SMIC N+3 has a transistor density of 113.4 MTr/mm², slightly above TSMC N6 at 107.7 MTr/mm². Even without EUV, SMIC has achieved density beyond TSMC’s mature N6 node which utilizes EUV. Metal Stack The smallest critical dimension in the teardown is M0; SMIC N+3 uses a 32.5 nm local metal pitch. That is smaller than the 36 nm M0 pitch on Intel 18A in Panther Lake. However, this does not mean that SMIC has a better process than Intel 18A or TSMC N3P. M0 is a local intra-cell routing layer. Its usefulness depends on the full interconnect stack: M1 and M2 pitch, track count, via and line resistance, design rules, mask count, overlay control, and routing flexibility. The 32.5 nm M0 is consistent with self-aligned quadruple patterning (SAQP), whose four-population line-width loading we read coarsely as alternating widths of 21.5 to 24 nm; M1 and M2, at 38 and 40 nm, are consistent with self-aligned double patterning (SADP), a single A/B split. On TSMC N6, M0, M2, and M3 sit at a relaxed ~40 nm and are consistent with SADP-class double patterning, with no need for quadruple patterning. That said, we measure M2 for example at ~43 nm, likely inflated by sparse routing. We do not assign any specific layer to EUV from our cross-sections; the distinction we can draw is double versus quadruple patterning, not lithography wavelength. Transistor-level density in the front-end-of-line (FEOL) sets an upper bound, but the design is ultimately limited by what the interconnect stack can route. The lowest metals are the most important for standard-cell density, but the semi-global and global layers determine how usable that density is at the block and chip level. Two axes are commonly used for chip cross-sections: the fin-cut and the gate-cut. The micrograph above is a fin-cut and shows metals 0 through 3. This axis lets us see the even-numbered metals, with M0 right above the fins. There are two kinds of M0 lines. The first are the power rails; these are wide wires for the VDD and VSS running horizontally at the top and bottom edges of each standard cell. The wide wires measure 55 nm across, more than double the other M0 lines. Their width minimizes resistance and reduces IR drop. The second kind are intra-cell wires, short segments within the cell that connect terminals to M1. These have alternating widths between 21.5 and 24 nm. The M0 pitch is 32.5 nm, a 19% reduction versus N+2 and N6. At this pitch, DUV patterning requires more aggressive multi-patterning, increasing mask count, overlay sensitivity, process complexity and cost. M0 is below what a single DUV-defined spacer (SADP) can resolve, so SMIC cascades a second spacer step (SAQP). The cross-section reflects the cost: the M0 trenches are visibly more re-entrant (narrower at the bottom than the top) than M1 or M2 on the same chip and carry a bright barrier-rich foot where the trench meets the etch-stop layer. That shape is partly the intended damascene profile, as a slightly narrow bottom helps void-free copper fill, but its magnitude at M0 is driven by the tight pitch and the higher trench aspect ratio. Intel 18A supports an M0 pitch of 32 nm, although Panther Lake has only shipped with a looser 36 nm pitch. This is due to Intel’s heavy usage of HP libraries. Among leading-edge nodes, 18A has the loosest M0 pitches due to PowerVia. With power routing moving to the backside, congestion is reduced, and the entire front-side metal stack can be used for signal routing. M2 is the first true inter-cell routing layer. It runs horizontally like M0 but spans across multiple cells to carry block-level signals. The M2 pitch sets the cell’s track height – the number of M2 tracks that fit between the VDD and VSS rails, defining what the library calls a 6-track or 7.5-track cell. This layer is the most important, limiting the routing of entire blocks. SMIC N+3 features a 5.7-track cell. The M2 pitch is 40 nm, a 5% decrease over N+2 and the same as N6. This shrink keeps the pitch at the edge of what is possible with double patterning. Future nodes will need to increase the number of masks for M2 as reducing the number of tracks is much harder due to the limitations in routing. The micrograph above is in the perpendicular direction, the gate-cut, and shows metals 0 through 4. This allows us to see and measure the odd-numbered vertical metal layers. The M1 pitch is 38 nm, 9.5% less than N+2 and 33% less than N6. The M1-to-gate ratio matters because it sets local routing flexibility. N+2 and N+3 use a 3:2 ratio, while N6 uses a 1:1 ratio, explaining the huge differences in M1 pitch. The more M1 lines there are compared with the gates, the more flexibility there is for power and signal crossing within the cell. Routing flexibility enables more complex and better cells. Clean fractional ratios are also preferred as a grid is periodic and improves layouts. The 3:2 ratio gives SMIC more local routing flexibility than a strict 1:1 grid, but it also complicates layout and patterning. This is a DTCO choice, with SMIC increasing process complexity to recover density and routability without EUV. This 3:2 ratio is not very popular in the leading-edge nodes. TSMC has only used it on N7+, the N5 family, and the short-lived N3(B). They have switched back to a 1:1 ratio for N3E. Intel has only used it on the 10 nm/Intel 7 family, with Intel 4, 3 and 18A all using a 1:1 ratio. Samsung is the only one still using a 3:2 ratio at the leading edge, using it in the SF4 and SF3 families. It remains to be seen if SMIC will remain at a 3:2 ratio or move to a 1:1 ratio with its future nodes. The industry is still actively exploring these local-routing ratios. At VLSI 2026, imec will be presenting work on even higher ratios, including a 2:1 scheme that can reduce area by up to 14%. We will be covering the conference in a future newsletter article. Subscribe We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. The final local interconnect layer for N+3 is M3, with a pitch of 44 nm. The M3 pitch is the same as on N+2 and 10% larger than on N6. The semi-global layers carry the majority of block-level signal routing. They have a coarser pitch than the lower local layers. On leading-edge nodes, they are designed to sit at the limit of DUV single patterning. M4 through M11 pitches were found divided between 80–82 nm (M4–M6), 128 nm (M7–M10), and 148 nm (M11). Given limited sampling, it is possible these are divided further in dense routing areas. At the top are two giant metal layers, M12 and M13. These have kept the same pitches as N+2 at 1920 nm and 4600 nm respectively. While the lower layers’ pitches are generally fixed by the process and library, the upper layers vary much more in pitch and count, depending on the design. Even two smartphone SoCs on the same process can have wildly different metal stacks. The Helio G99 carries fewer routing layers, reaching coarse metal pitches of 850 nm by M9, while the larger and higher-performance Kirin 9030 keeps fine pitches until M11. SRAM At the leading edge, SRAM is much more difficult to scale than logic. TSMC’s latest nodes have seen little to no bitcell scaling, while logic still has more DTCO levers to pull. While looking for other logic libraries in the GPU compute units, we stumbled upon the SRAM. The most common type of SRAM has 6 transistors (6T), but this cell had 8 transistors (8T) instead. 8T SRAM adds two transistors to form a dedicated read port. Unlike a 6T cell, where reading disturbs the storage, the decoupled read port removes read-disturb, improving read stability and letting the cell be pushed harder for performance. At first glance, the cut looked like an unusual logic library, with each cell row having 3 fins of one polarity and 5 fins of another. The rows also alternated in orientation. Energy-dispersive X-ray spectroscopy (EDS) resolved our confusion. The cut had not landed on the GPU logic, but on the SRAM macro beside it. The unusual fin pattern was due to the SRAM library. We return to EDS in the process flow analysis behind the paywall. SRAM libraries are not like traditional logic libraries. Due to the unequal number of PMOS and NMOS transistors, they require specialized rules and layout libraries. They do not need the flexibility of logic libraries, so they are hyper-optimized for one purpose: dense, reliable memory. The SRAM cell we found is a 1:2:2-2:2 cell. This means there is 1 fin per pull-up (PU) PMOS transistor, and 2 fins per pull-down (PD) and pass-gate (PG) NMOS transistor. These 2 PU, 2 PD and 2 PG transistors would usually form a single 6T high-current cell (HCC). An 8T HCC adds a read-pull-down (RPD) and a read-pass-gate (RPG) NMOS transistor, each with two fins. We measured a cell height of 406 nm, which brings the bitcell size to 0.0463 µm². That is a theoretical peak density of 21.6 Mib/mm². We estimate that a 6T HCC would have a cell height of 292 nm and a size of 0.0337 µm². This is ~12% larger than a 6T HCC on Intel 3 and 4. We also estimate the 6T high-density cell (HDC) to have a cell height of 228 nm and a size of 0.0260 µm². This is coincidentally the same as the logic standard-cell height measured earlier. The estimate puts the cell near Samsung 7LPP/5LPP and slightly below TSMC N7/N6. That is a theoretical peak density of 38.5 Mib/mm². 6T HDC is arguably the most important cell as it is used for the largest caches in a chip, the L3 caches and system-level cache (SLC). Both the Kirin 9020 and 9030 have split the SLC into 4 banks to raise total SLC bandwidth. In the Kirin 9030, the SLC increased from 2 MiB to 3 MiB per bank. Correspondingly, the number of arrays within the bank also increased by 50%, from 16 to 24. Each array can store 128 KiB and forms an orderly pattern on the die shot. From the Kirin 9020 to the Kirin 9030, the area of a 128 KiB SLC array decreased from 0.0477 mm² to 0.0392 mm², an 18% shrink. The achieved density is 25.5 Mib/mm², 66% of the theoretical maximum. While the SLC was quite similar across both chips, the L3 has seen some major changes, particularly in terms of its layout. The total capacity also went up from 10 MiB to 12 MiB. Much like the SLC, the L3 is also split into 4 banks. In the Kirin 9020, an L3 bank consisted of 16× 128 KiB arrays and 16× 32 KiB arrays. However, an L3 bank in the Kirin 9030 instead consists of 48× 64 KiB arrays. In the Kirin 9020 L3, a 128 KiB array was 0.0513 mm² and a 32 KiB array was 0.0154 mm². The size of the 128 KiB array is different on the L3 and SLC as the assist circuitry for the two arrays differs depending on their purpose. In the Kirin 9030 L3, a 64 KiB array is 0.0210 mm². Although not a like-for-like comparison, normalized for capacity, it is 18% smaller than the 9020’s 128 KiB L3 array and 31% smaller than its 32 KiB L3 array. The achieved density is slightly lower than the SLC, at 23.8 Mib/mm², 62% of the theoretical maximum. Unlike the L3 and SLC, the prime cores’ private L2 cache uses a 2-bank design. As the prime cores’ L2 is latency-critical, it likely uses 6T HCC instead of 6T HDC. The 9020 has 16 arrays in each bank while the 9030 has 32. Each array has a capacity of 32 KiB. A 32 KiB array in the L2 shrank from 0.0171 mm² to 0.0142 mm², ~17% smaller. The density is 17.6 Mib/mm², ~59% of the theoretical maximum for 6T HCC. SRAM scaled well from N+2 to N+3, shrinking by ~19%, close to the theoretical logic shrink. The caveat is that N+2’s bitcells were unusually large, bigger than comparable 7 nm-class nodes, so part of the gain is catch-up rather than true scaling. With the insights from STEEL’s teardowns, we will be doing a deep dive into SRAM in a future newsletter article. Subscribe Everything above came out of a single STEEL teardown: die annotation, block-level area analysis and TEM cross-sections through logic and SRAM. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Future Roadmap The same cross-sections that pin down N+3 also show where SMIC can go next. Although N+3 is already close to the practical limits of DUV multi-patterning in several layers, SMIC still has a few scaling levers left. A theoretical N+4 would likely start with cell height. N+3 uses 5 M0 tracks between its power rails. Moving to 4 M0 tracks, as on SMIC N+2 and TSMC N6, could reduce cell height by roughly 15%. The routing grid is only one side of the shrink; the front end also must fit into the smaller cell. One possible FEOL lever is reducing the p-to-n isolation spacing from two diffusion grid units to one. Intel used this scaling booster on Intel 4, and TSMC did so on its N3 family. This path trades layout flexibility for density. Fewer M0 tracks reduce local routing resources, while tighter p-to-n spacing raises integration and design-rule difficulty. M2 is also constrained by the cell height shrink. For SMIC to maintain a ~5.7-track cell, M2 would need to move toward ~35 nm. That would move another layer into SAQP territory. SMIC could also reduce the CGP from 57 nm to 54 nm. Intel reached a similar CGP on Intel 10 nm/Intel 7 without EUV. The local interconnect is also tougher. If SMIC keeps the 3:2 M1-to-gate ratio, M1 would need to shrink to 36 nm and would likely require SAQP as well. If SMIC moves to a 1:1 ratio, M1 could relax to 54 nm, but it would give up routing flexibility. Under this theoretical path, we estimate that SMIC N+4 could reach a cell height of 198 nm and a CGP of 54 nm, implying a Bohr density of 137.8 MTr/mm², on par with TSMC N5 or Samsung SF4. However, the difficulty is cumulative. Each step is individually plausible, but together they make N+4 harder than the transition from N+2 to N+3. It will likely take longer, cost more, and carry less process margin. A theoretical N+5 would require a larger integration shift. One possible path is backside contacts (BSCon), moving power routing and source/drain contacts to the backside, which would reduce front-side routing pressure and enable another reduction in cell height. The front-side metal pitches could relax to reduce the process complexity. M0 would likely relax slightly to ~34 nm, and M2 and M4 pitches could relax further. CGP is unlikely to shrink much further. Even with EUV, 48 nm has been the practical limit for yield and process control. This approach would allow N+5’s cell height to fall to 170 nm and its CGP to 53 nm. This implies a Bohr density of 163.6 MTr/mm², on par with Intel 18A’s HP library. However, this would not make N+5 cost-competitive with the leading edge. It would reach a similar density through a much more expensive route. The integration difficulty rises sharply, with new process flows for backside alignment, wafer thinning, contact reveal, and backside metallization. Past this point, standard density and interconnect scaling become increasingly unattractive. That is where Huawei’s roadmap stops looking like a normal foundry roadmap and starts looking like a packaging roadmap. At ISCAS 2026, Huawei unveiled its tau (τ) scaling law, reframing process scaling in the time domain. τ is the time cost of data movement and processing: switching delays in transistors, RC signal propagation delays in circuits, compute, memory, and networking latency. Outside Huawei’s terminology, this is called system-technology co-optimization. This is Huawei’s answer to its lack of EUV lithography. Without EUV, planar density cannot keep pace with TSMC, Intel, or Samsung. If transistor density cannot shrink further, Huawei’s alternative is to shorten wires, reduce buffering, and stack logic vertically. “LogicFolding”, Huawei’s implementation of this new scaling idea, is, in practice, an aggressive 3D stacking approach. AMD V-Cache places SRAM above or below a CPU die. AMD’s MI350X places active interposer dies (AIDs) underneath accelerator and compute dies (XCDs), with the AIDs handling cache, IO interfaces, the network-on-chip (NoC) and embedded metal-insulator-metal (MIM) capacitors. With LogicFolding, parts of the same logic block are split across multiple active dies bonded face-to-face at ultra-fine pitch. This allows Huawei to shorten some critical paths and reduce buffer overhead, not merely add cache capacity or offload the IO and interconnect. Shortening wires is where the higher clocks come from. A large share of a modern core’s delay and energy budget goes into driving long interconnects and the repeater buffers along them. LogicFolding distributes a block’s critical-path gates across multiple stacked tiers bonded at a very fine pitch, so the bond interface behaves like an additional metal layer and the longest paths get shorter. That is how Huawei expects to recover frequency and efficiency it cannot get from the process alone. Huawei’s roadmap shows its intent. Prime core frequency is targeted to rise from 2.75 GHz in the Kirin 9030 to roughly 5 GHz by 2031, far beyond what planar scaling alone could deliver. Prime cores with 3.1 and 3.39 GHz clocks are being tested in its labs, although their power consumption is unknown. Beyond that, chips are in the design, simulation or pathfinding phase, meaning the frequencies are targets. However, the direction matters more: LogicFolding also helps with performance, not just density. The catch is that Huawei’s density claim is not directly comparable to foundry densities. A stacked design can report more transistors per package footprint by adding active layers, even if each patterned die remains well behind TSMC or Intel in front-end density. This is how Huawei can claim to reach foundry 14A-equivalent density by 2031. This is not a like-for-like foundry comparison, with Huawei using stacked logic and measuring density per package footprint. On a normalized Bohr-density basis, SMIC N+3 is ~114 MTr/mm², 38% less than Intel 18A’s HD library. Huawei’s 3D roadmap closes the gap by stacking active logic, reaching 215 MTr/mm² by 2030. In 2031, the roadmap density jumps to 295 MTr/mm², implying either a third active layer, partial EUV insertion or aggressive planar DUV scaling. Huawei’s methodology makes other foundries look much denser as well. Applying it to AMD’s MI450X with an N2 top die on an N3P base die yields a theoretical density of 460.2 MTr/mm² in 2026, compared with Huawei’s 295 MTr/mm² in 2031. This Kirin 9030 does not use LogicFolding, remaining in a conventional mobile SoC package. Instead, it forms the baseline for how far Huawei and SMIC can push planar scaling. Future teardowns of Kirin and Ascend chips will show both planar logic density and Huawei’s hybrid bonding solutions. Export controls changed China’s optimization problem rather than ending it. EUV restrictions raised the cost and complexity of leading-edge manufacturing without freezing it. SMIC reaches N6-class logic density through DUV immersion, SAQP and DTCO, while Huawei shifts more of the burden onto architecture, packaging and system-level integration. Future nodes will be tougher. N+3 still had room to tighten local metals and reduce cell height and CGP. Further scaling without EUV leaves fewer levers. More aggressive multi-patterning adds masks and overlay error. SMIC can keep pushing DUV, but each step will get more expensive and less forgiving. The design side is just as critical. Huawei had domestic EDA tools and flows before the Kirin 9030, with the Kirin 9000s, 9010 and 9020 making that clear. Huawei was able to ship multiple consumer SoCs on SMIC N+2 and N+3 while cut off from the Western EDA stack. US export controls restricted EDA tools for advanced chips in 2022 but did not target tools for more mature chips. In 2025, the US government briefly placed much broader restrictions on EDA software from Synopsys, Cadence, and others, before lifting them less than two months later as part of a trade deal tied to rare earths. Huawei has been unable to access those tools because it remains on a US trade blacklist. That forced Huawei, SMIC and Chinese academic institutions to build their own tools and flows. Researchers at Peking University recently announced a prototype EDA tool for Huawei’s LogicFolding architecture, which requires a new flow to handle the multilayer layout and floorplan. This is not the same as replacing the full Synopsys or Cadence stack, but it shows where domestic EDA is headed: toward tighter co-optimization between architecture, process and packaging. These advances are also diffusing into the Chinese ecosystem. SMIC is licensing its N+2 and N+3 processes to HLMC/Hua Hong at the government’s direction rather than by choice. If the same process learning feeds into Ascend accelerators for AI training and inference, the choke point shifts from one named fab to an ecosystem. Alibaba’s T-Head silicon arm and Cambricon, a Chinese AI chip designer that is expected to supply ByteDance, could also be major beneficiaries. Sanctions aimed at SMIC alone become less effective once the manufacturing knowledge has spread to other fabs and design houses. China is not closing the gap with Intel, Samsung and TSMC. The teardown shows the opposite in several places: no EUV, no backside power, higher process complexity, and visible trade-offs. But China is still advancing. If domestic chips become good enough for phones, inference, networking and security-sensitive workloads, they can matter strategically without matching TSMC at the leading edge. Behind the paywall, we show what else STEEL can do, with material and process flow analysis of SMIC N+3, and analysis of the Kirin 9030 package. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline, access the full Kirin 9030 and SMIC N+3 analysis or to commission a custom teardown, contact sales@semianalysis.com.
Flutter Entertainment to Delist From London, Trade Solely in New York
The FanDuel owner said trading volumes and regulatory costs meant delisting from the U.K. exchange was in the best interests of the company and shareholders.
Flutter Entertainment to Delist From London, Trade Solely in New York
The FanDuel owner said trading volumes and regulatory costs meant delisting from the U.K. exchange was in the best interests of the company and shareholders.
Ancient DNA shared with Neanderthals may explain human language
A tiny set of ancient genetic “switches” may have played a surprisingly large role in making human language possible. Researchers found that these DNA regions, which act like volume controls for genes involved in brain development, have an outsized influence on language ability despite making up less than 0.1% of the genome.
Stock Market Today, June 11: AMC Entertainment Jumps After Completing $150 Million Equity Offering
AMC’s fresh equity raise, surging volume, and box-office rebound put its turnaround narrative back in focus, today, June 11, 2026.
2026 Fantasy Football QB Projections: Key Stats for Top Quarterbacks
Quarterback projections for 2026 emphasize passing volume, rushing production, touchdown rates, and turnover potential.
iOS 27 Tidbits: Share a Phone Number on Two iPhones, Independent Alarm Volume, Faster AirPlay and More
At the WWDC 2026 keynote, Apple detailed iOS 27 changes like a new version of Siri with a dedicated Siri app and Apple Intelligence features across multiple apps, but there are dozens of smaller but still important changes that Apple didn't have time to go through. Apple shared an image summarizing some of the bug fixes and optimizations it made in iOS 27, iPadOS 27, and macOS 27, and there are some interesting changes.
Where science meets fashion: Raha Saremi turns agricultural waste into biomaterials
[vc_row][vc_column][vc_column_text css=”” el_id=”text-container first-paragraph” el_class=”text-container first-paragraph”] When cracking a pecan, most people throw away the shell. Raha Saremi wants you to wear it. How? As a material scientist in the College of Family and Consumer Sciences, Saremi witnessed firsthand the sheer volume of agricultural byproducts going to waste across Georgia’s farming communities and natural environment. … Continue reading “Where science meets fashion: Raha Saremi turns agricultural waste into biomaterials”
Accel Entertainment expands Louisiana footprint with truckstop casino acquisition
Accel Entertainment has expanded its Louisiana operations through the acquisition of Rice Palace Truck Stop Casino in Crowley, adding a high-volume gaming locat
May's top PlayStation games by copies sold
Yesterday’s State of Play gave us an idea of where PlayStation’s heading next. But we’ve had our May estimates for a couple of days now (we always update our data daily for clients), so it’s time to look at what performed best on PlayStation last month. We’ve got a new IP at the top, two evergreens doing their evergreen thing, FC26 smashing it ahead of the World Cup Plus pivot, and a quiet but promising result for Lego Batman. Let’s have a look at the state of Play…Station’s top games for May. 007 takes #001 007 First Light sold 1M copies on PS5 in May, easily making it the month’s top PS5 game by copies sold. Over 80% of those May copies were digital, which is broadly in line with where PlayStation’s digital share has settled for new releases this year. To date, 007 First Light has sold through 2.2M copies across platforms (so no unsold retail copies in that figure). The platform split is 55.1% PS5, 33.1% Steam, and 11.8% Xbox (console, Windows, and cloud combined). In gross revenue terms, 007 First Light has generated $150M. Owing to regional pricing and audience composition differences, the consoles make up a higher share of revenue than they do copies. Of the $150M, 60.5% came via PlayStation, 27.6% via Steam, and 12.9% via Xbox. Part of this is because over two-thirds of 007 First Light‘s PlayStation audience is in North America (43.4%) or Western Europe (23.2%), where local currency means the game generates more revenue per player. On Steam, under half of First Light‘s audience is from those same regions (31.8% North America, 15.1% Western Europe). As we covered in last week’s 007 Steam piece, the Steam version is pulling in higher-than-expected numbers in China, which now accounts for 17.3% of First Light‘s Steam audience. 007 is the equivalent of $44 USD in China, which is roughly 37% cheaper than the US price and about 44% cheaper than Western Europe. Subscribe for free to get the most accurate games estimates in your inbox twice a week 🫶 Subscribe The crossover data backs up what we’ve seen all year about launch-window cohorts. 11% of PS5 players who played 007 First Light in May also played Lego Batman: Legacy of the Dark Knight, which launched just a few days before. Last month was a great month for Denmark! IO Interactive is Copenhagen-based, and Lego Group is headquartered in Billund (TT Games is UK-based but produces work under Lego Group licence and direction). Speaking of which… A very blocky #2 and #3 Minecraft sold another 788K copies on PlayStation consoles last month. Business as usual, since Minecraft hasn’t sold fewer than 760K copies in a single month all year. With over 350M copies sold across all platforms, Minecraft is the best-selling game in history and one of the strongest brands in the world. Every month, a new cohort of children reaches Minecraft age, which guarantees a constant volume of new sales regardless of what the broader market is up to. The demographic refresh rate is truly impressive, with the audience renewing itself faster than it’s churning. Lego Batman: Legacy of the Dark Knight shifted 757K copies on PS5 last month, bringing its lifetime total on the platform to over 800K. Across all platforms, Legacy of the Dark Knight has now passed 1.5M sold through, so PlayStation accounts for over half of the game’s players. The May crossover data for Legacy of the Dark Knight on PS5 is also useful. 27% of those players also played Fortnite, 16% Roblox, 16% FC 26, and 14% NBA 2K. That’s the household-and-family cohort showing up, plus the launch-window cohort of core gamers who buy practically everything. FC 26 gets players through the door ahead of the World Cup FC 26 sold 411K copies on PlayStation last month (90% via PS5), the fewest copies FC 26 has sold all year and down heavily from April’s 700K. Part of this dropoff is because FC 26 has been available as a PlayStation Plus monthly game since 6 May, cannibalising premium sales. Subscribe for free to get the most accurate games estimates in your inbox twice a week 🫶 Subscribe The strategic logic is straightforward for EA, which is sacrificing premium unit sales in May to build up the player base ahead of the FIFA World Cup, which kicks off on 11 June. Obviously, a bigger player pool going into the tournament means a bigger pool of potential Ultimate Team spenders during the period when football attention is at its peak. The early returns are around what you’d expect, with 4.4M new players accessing FC 26 via PS Plus last month – a substantial new spender pool. Anecdotally, a few of my mates who were ‘’skipping FIFA and Ultimate Team this year’’, were drawn back in via PS Plus. Lo and behold, one of them is buying packs like it’s going out of fashion. Whether this is all a smart trade for EA depends entirely on the Ultimate Team conversion rate over the next six weeks. Either way, the short-term engagement impact on the game as a whole is evident. FC 26‘s MAUs hit a record 24M on PlayStation in May, up 30% from the previous record set in April. GTA V does what GTA V always does Rounding out the top five is another evergreen title. Grand Theft Auto V shifted another 387K copies on PlayStation last month. No matter what else is happening in the industry, GTA V keeps pulling players in. It’s sold another 1.8M copies on PS5 in the first half of this year alone, helping the franchise pass the 230M-sold milestone across all platforms. Subscribe for free to get the most accurate games estimates in your inbox twice a week 🫶 Subscribe I have a theory that Minecraft and GTA V are doing the same thing at different demographic levels. Both are functioning as generational gateway games that the audience ages into faster than it ages out of. Minecraft captures kids around age 6-10, GTA V captures much of the same audience around age 12-15 (unofficially, of course). The crossover data suggests this: 40% of GTA V‘s monthly PlayStation players typically play Fortnite in any given month, while 30% play Roblox. Household accounts aside, that’s not the original GTA V audience from 2013. Of course, the under-12 audience would love to get their hands on GTA, too. It’s always been the way of things, and some parents are happy to oblige. Mine did too back in the day, and I turned out just fine. Right? Right!? Want to get your hands on our data for yourself – for free? We’re offering a free trial of our platform for games companies. Send us a message here, or reply to this email, and we’ll set you up. The last word Reply to this email – or reach out here – if you have any feedback for the newsletter – or want to request a game for us to cover. [Alinea Analytics boasts the most accurate PC and console estimates in the business. Game makers use our platform to understand their audience, keep an eye on the competition, monitor sales trends, and spot new opportunities. We equip game studios and financial institutions with accurate data and the confidence to make smarter, data-driven decisions. Want to talk about all things games market data? We’d love to chat!]
Macquarie Sees World Cup Boost Driving Betting Growth, Favors Flutter Entertainment (FLUT)
Flutter Entertainment (NYSE:FLUT) stands out as one of the biggest potential beneficiaries of the 2026 FIFA World Cup, according to Macquarie, which expects the expanded tournament to generate a substantial increase in global sports betting activity and provide a meaningful earnings tailwind for leading operators. The investment bank estimates that betting volumes tied to the competition could exceed $50 billion worldwide, creating a favorable backdrop for major sportsbook and online gaming comp
Most Business Owners Are Leaving Money on the Table. This Bar Expert Figured Out Why.
How Bar Design Essentials author Tobin Ellis is helping operators stop prioritizing look over workflow to unlock peak-volume profits.
The Business-First IP Playbook: David Hyams on Mapping Business Value and the Limits of General LLMs
In the latest episode of IP Innovators, host Steve Brachmann sits down with David Hyams, Co-Founder and Chief Business Development Officer of Longship Legal, to explore what it looks like to build an IP practice around business value rather than patent volume.
Penn State Health reports strong financial, volume growth through third quarter
Penn State Health reported strong third-quarter results for fiscal year 2026, highlighted by double-digit total revenue growth, improved operating margin, and increased patient volumes — reflecting sustained demand for care and ongoing efforts to expand access across the region.
AI & Science: What Is the Future of Discovery?
Continued progress in artificial intelligence, its expanding usefulness in science, and its contributions to landmark advances suggest that we may have entered a new era of AI for science.The breakthroughs so far—such as predicting the structure of practically every known protein, with profound implications for our understanding of biology, health, and the treatment of disease—are notable not only for what was achieved but also how it was achieved and what that suggests for scientific progress. This special double issue of Dædalus poses the question: What is the future of scientific discovery in this new age of AI? Thirty-three scientists responded. Bringing perspectives from life sciences and medicine, cognitive science and neuroscience, the physical and earth sciences, chemistry and materials science, computer science, mathematics and the social sciences—they draw on their work at the frontier of AI and science. The authors write with an eye to the future, not just the present. They explore what is being achieved and what possibilities lie ahead; examine AI’s limitations and efforts to move forward; and investigate the larger implications of AI-assisted science—on how science is done, the role of the scientist, and the scientific method, as well as the challenges and complexities involved.The authors together exemplify a long-standing bidirectional relationship: AI advancing science, while science advances AI. Where that relationship will take us—a golden age of discovery? New scientist-machine collaborations? Autonomous labs? Discoveries without human understanding?—is a future we are only beginning to imagine, and one we must also shape if the beneficial possibilities are to be realized.Image: UMAP sculptures visualizing three Dædalus volumes on artificial intelligence. © 2026 by Refik Anadol.
Scientists discover strange “narwhal” waves that trap light beyond known limits
Physicists at Peking University have uncovered a new way to confine light far beyond conventional limits — without relying on metals and their inherent energy dissipation. By formulating the singular dispersion equation, the team discovered narwhal-shaped wavefunctions that trap light at deep-subwavelength volumes in purely dielectric materials. The advance, dubbed singulonics, could pave the way for ultra-efficient photonic chips, new quantum technologies, and imaging tools with unprecedented resolution.
Vast Launches Satellite Bus Business Line
The commercial space station company announced this morning that it would start selling satellite buses, specifically targeting the low-cost, high-volume, high-power niche for missions from comms, to EO, to national-security programs.
Fears of new China shock as EU industry’s reliance on imports grows
Rising volume of components imported from China prompts warning of cannibalisation of European industries
Now What? With Carbon Pricing Eroded and Pipeline Politics Advancing, Here Are the Pathways for Climate Success
At the end of a whirlwind week of news on carbon pricing and electricity strategy, capping a madcap year of pretty much non-stop, dramatic change, the word across much of Canada’s climate and energy transition community is that climate policy in this country has been shredded. Eviscerated. Hit with a sledgehammer by policy rollbacks that have pushed the country’s 2050 net zero target “well out of reach”. That means it’s never been more important to look for the rays of hope and glimmers of possibility. To glimpse the seeds of the next set of strategies to get Canada’s climate pollution under control and the country into the accelerating global dash away from fossil fuels. And then, once we’ve spotted those possibilities, get on with the hard, day-to-day slog of trying to make them a reality. Nothing takes away from the frustration and the deep disappointment so many climate and energy hawks are expressing, the sense of betrayal by the author of Value(s) and the former UN special envoy for climate action and finance. But we knew two things as the week drew to a close. We’re looking at the world as it most definitely is. And we don’t get to give up finding the pathways to confront climate change and deliver faster, deeper carbon cuts that leave no one else behind. So really, the first question we all have to ask ourselves is: What’s next? Subscribe All the Oxygen in the Room The outpouring of anger and grief over the carbon pricing deal between Prime Minister Mark Carney and Alberta Premier Danielle Smith has been absolutely understandable. So much of the climate community poured years, more than a decade, into dragging the current federal pricing regime across the finish line, then defending it from a deluge of three-syllable rhymes after the Trudeau government proved utterly incapable of delivering its own message. The policy foisted on us by neo-classical economists took up all the oxygen in the room, burned through years of climate response time that we won’t get back, while cornering climate hawks into the position that the best response to the crisis of our lifetimes is a new tax…in an era of historic anti-tax sentiment. I mean, really—what could possibly have gone wrong? Against that history, let’s appreciate columnist Max Fawcett’s point that even a modest carbon pricing agreement with a government as off-the-wall libertarian/conspiracist as Danielle Smith’s—those adjectives are mine, not Max’s—is a win worth savouring (as long as Smith keeps her promises for a change). But part of living in the world as it is (no, I’m not letting that go) is to be clear-headed about what we can and can’t control. And one thing we get to decide, after seeing this week’s carbon price festivities take up all the oxygen yet again, is whether we want to keep letting that happen. Particularly when success down that road depends on a factor that no one with a climate agenda can control or influence—a provincial carbon pricing mechanism that has been manipulated and eroded beyond its lowest possible denominator. Thankfully, that’s not the way it has to go. Not when we have so many other powerful, practical tools at our disposal, including the ones still available to us through this abominable Memorandum of Understanding (MOU) between Canada and Alberta. Tools In Our Toolbox When I started roughing out this list, I didn’t expect it to grow to nearly a dozen bullet points. It’s probably still incomplete. Some of the greatest hits in today’s climate solutions toolbox include: • No Carbon Capture, No Pipeline: On Friday, Prime Minister Mark Carney explicitly stated that there’s been no change to the MOU provision that there will be no West Coast pipeline without an industry commitment to build its massive, $16.5-billion carbon capture and storage (CCUS) hub in Northern Alberta, and vice versa. The two megaprojects were joined at the hip when the MOU was signed Nov. 27, and the implementation agreement this week affirmed that they still are. A parade of independent analysts have spent years pointing to the economic and technical flaws in CCUS, while the industry kept postponing its investment decision until it could arm-twist the government for more “clarity” (by which it meant even more lavish taxpayer subsidies) on the project. Now the industry itself is running away from the CCUS hub and insisting the pipeline should proceed without it, but Carney doesn’t seem to be budging from a central tenet of the MOU to which Smith has signed on. • No Subsidies, No Investors: Climate analysts and advocates have quite rightly been hammering away at Carney and his team, insisting that any new capacity the industry wants to build must proceed without new subsidies. The government has responded with a growing collection of funding and financing mechanisms for the very wide menu of industrial development and nation-building projects they say they want to take on, and that menu always includes fossil fuel infrastructure. But it’s hard to see how even the combined fiscal clout of the federal and supportive provincial governments will deliver the financial backing private investors would need when the business case for new fossil fuel development is evaporating before their eyes. Particularly when… • No Market, No Demand, No Investors: As our friend Markham Hislop at Energi Media (our apparently sleepless friend, given the massive volume of great material he’s been churning out) points out this morning, the biggest vulnerability in any pipeline deal is the assumption that Asian buyers will want the oil or liquefied natural ga that our fossil industry is so keen to send them. Hislop writes in part: Ottawa and Alberta are effectively betting that countries like China and India will continue increasing oil imports for decades as their economies grow and energy consumption rises. That assumption underpins the entire economic rationale for expanding oil sands production and building billions of dollars in new export infrastructure. But Asian energy systems are changing rapidly… China, India, South Korea, and other major hydrocarbon importers are now investing hundreds of billions of dollars into electricity systems built around wind, solar, batteries, nuclear, hydro, and expanded transmission infrastructure. Domestic “energy sovereignty” is increasingly replacing the old energy-security model based on stable oil and gas imports. Those investments are expected to sharply slow oil demand growth and eventually reverse it, even as overall energy consumption continues rising. There are also refining constraints. Many Asian refineries and petrochemical complexes are already optimized to process discounted heavy crude from the Middle East and Latin America. That raises serious questions about how much additional Canadian bitumen Asian markets can absorb at profitable prices. Small wonder that there’s still no private sector investor for the project, despite Smith’s government desperately beating the bushes to put together a deal. For now, Alberta is acting as proponent and covering early start-up costs for a pitch to the federal Major Projects Office, which could actually turn into the next tough hurdle for Smith and her pipeline to jump. • Canada Day Looms: How ironic that Canada’s birthday this year could become a major chokepoint for the provincial premier who’s been working so diligently to tear the country apart! The July 1 target date for Alberta’s pipeline proposal is baked into the MOU, was reaffirmed by the implementation plan, but it hadn’t dawned on me that it cuts both ways. As one very smart colleague wrote in an email yesterday, “they’ve thrown the ball into Alberta’s court to get the project proposal on the table really quickly and to have to do a whole pile of work to put together a massive, complicated project that would typically take years to assemble, and they’ve given them weeks to do it.” That makes July 1 a looming deadline that Smith won’t be able to run away from politically, especially with the separatists in her party and her caucus breathing down her neck. (See previous ref to off-the-wall.) But if Alberta comes in with a sloppy, incomplete submission, even after Carney bent over backwards to simplify the application process and the rules that govern it, it may be harder for the province or the industry to blame Ottawa and insist on the faster process they claim their investors are demanding. (Oh, wait—which investors would those be??) • We’ll See You In Court (Then We’ll See You Again): If Carney did cave, that would be just one more reason for Indigenous and other affected communities to take the government and the process to court—Just as Alberta First Nations did, successfully, in response to Smith’s half-baked separation referendum. Veterans of the Harper era have been warning that a shoddy process around fossil fuel infrastructure or other major projects will be a recipe for the very delays that process seeks to avoid. And now more than ever, with renewable energy and energy storage eating fossil fuels’ lunch in import markets around the world, a delayed pipeline or LNG terminal may be as good as a cancelled one. • Charged Up, Ready to Go: With its goal of doubling Canada’s electricity supply to meet a doubling of demand by 2050, the national electricity strategy that Carney unveiled Thursday has a lot to like. With its explicit language about speeding the shift from fuels to more efficient and affordable electricity, global investment and deployment patterns that already favour that shift, an emerging bidirectional power grid, the role of front-line options like rooftop solar and heat pumps, the emergence of electric vehicles as behind-the-meter energy storage, and the domestic jobs and manufacturing to make it all happen, the document doubles down on the essential cornerstone of a faster shift off fossil fuels. The strategy envisions a more prominent role for gas and nuclear power. But some of those provisions were already in the Clean Electricity Regulations that climate hawks are now fighting so hard to defend, inserted as a compromise in a futile attempt to mollify the industry and its political representatives in Alberta and Saskatchewan. But once again, gas will be a tougher sell when it’s more expensive and now so much more unpredictable than the clean alternatives. The new nuclear technologies are still speculative and deeply vulnerable to cost overruns. Increasingly, utilities, developers, and investors know it. Carney declared Thursday that “it doesn’t do us good to be sitting in court all the time with provinces. It doesn’t do us good to be talking past each other. What does do us good is to come together with specific projects.” There are no guarantees, but so much of the language and narrative-building in the electricity strategy suggests the lion’s share of those projects will be renewable. • The Party Has Already Started: The electricity strategy only rarely digs down to specific projects, but provinces representing three-quarters of Canada’s population are already embracing a faster transition. Hydro-Québec is working on a 10-year, $185-billion renewable energy and grid buildout by 2035. Ontario recently brought 10 provinces and territories together in a National Energy Corridor Agreement to boost interprovincial and -territorial transmission infrastructure. And the MOU implementation agreement commits Alberta to facilitate investment in renewable energy projects, a big step back from its continuing, punitive restrictions on renewables development. The electricity strategy envisions much of the financing and infrastructure that will be needed to pull those advances together into an integrated whole. • Delivering on Affordability: The MOU implementation plan has little or nothing to say about affordability (are you surprised?), but the electricity strategy does, with a top-line pledge to reduce home energy costs for seven out of 10 Canadian households by 2050, a total saving of $15 billion across the board. It’s just a start, but it puts affordability on the government’s narrative map. If they’re serious and deliberate about patching together a least-cost energy strategy, it’ll have little if any room for oil, gas, or nuclear—not with powerful evidence, for example, that electricity prices are higher when those prices are set by gas. • Smith Proves that Canada Works: By signing a deal that makes it harder to claim the federal government is blocking a new pipeline, Smith has helped prove Carney’s constant anti-separatist refrain that “Canada works”—incurring the rage, no doubt, of her own political base. Canada also needs to work for anyone who depends on a clean environment, healthy and thriving ecosystems, and safe, stable climate. But with Smith and her separatist constituents setting up as a fifth column for annexation by Donald Trump’s United States, let’s set aside any notion that 51st state status for Canada is a recipe for anything other than climate disaster (and so much else). Resisting and withstanding Trump (just 170 more sleeps until mid-term elections, which is a damn sight better than the 730 we started with) doesn’t mean a free pass for a pipeline, but we can still appreciate it that keeping Canada whole and sovereign is still Carney’s Job One. • The Words Not Spoken: Apart from a commitment to export a million barrels of “low-emission” Alberta bitumen per day (memo to Smith and Carney: You realize that that’s less than the industry is already exporting??), the MOU implementation plan says nothing about the international trade and economic sovereignty deals that Carney has been travelling the world to negotiate. It didn’t have to. Carney doesn’t need permission from Danielle Smith, her American enablers, or her separatist allies to continue building the alliances that will ratchet down our economic dependency on our unstable, unreliable neighbour to the south. But every connection he builds with countries outside North America helps align our economy and our future with a faster shift off fossil fuels. Little if any of this was on our bingo cards a year or two ago. But it’s the pathway that has opened up to us. And if it gives Canada any climate or energy gains at all in an era still dominated by Trump and his increasingly ridiculous tariffs, his loutish trade negotiations and his continuing annexation threats, we have to take the wins. Not least because they’ll be the point of departure for what we can achieve in 2027, 2029, and beyond, as Trump’s grip and this era begin to loosen and then fade. What is Carney Doing? If this line of thought is right—and it’s a possibility, not a prediction—it means that Carney’s actions and decisions are largely about buying time. Time for Trump’s power to wane. Time for Alberta’s separatist/conspiracist virus to spread, mutate, die out, or at least die back, with help from a vaccine of federal steadiness and calm (appropriate enough, for a movement populated largely by vaccine deniers) that no conspiracy theory can dismiss. And time for the government’s trade and investment agenda to deliver results—even knowing that some of those results will bring impacts that front-line communities will not and should not accept. In the immediate moment, none of this changes the way the wider climate community has to respond, from campaigners to investors to front-line practitioners. All of our voices are still essential. But those voices will be stronger and more confident if we have a clearer sense of the brutal game we’ve been pulled into, and a plausible path (or two it three) for playing it to the win we need. This conversation also underscores our biggest task for the remaining years of what was supposed to be the “decisive” decade for climate response: if we can shift the energy narrative in Canada, make it a mainstream view that the country’s preoccupation with oil and gas has us falling farther behind a changing world, we’ll see far better results in the 2030s and beyond. For many veteran climate advocates, taking on that part of the fight will begin with recognizing that most of our friends and family, neighbours and colleagues already understand that climate change is real and right in front of us: they’re looking away and staying silent because they don’t have what climate communicator Katharine Hayhoe calls “efficacy”. As Hayhoe recently pointed out in a feature interview with The Energy Mix, it amounts to science denial to keep hammering away at the dire news about global warming without also helping audiences understand what they can do about it, with multiple studies telling us why that won’t work. Far better to open those conversations with the dominant crises like energy security, food security, emergency preparedness and business continuity, affordability, and financial security that have knocked climate change far lower on the list of public priorities, and will likely keep it there. We Knew This Would Happen Climate hawks have always known this day would come. For decades, we warned that everyone had to pay attention to climate change right now, because it would be much tougher to respond once the crisis itself started affecting our daily lives. We were right, and here we are. But now, thanks to decades of hard work, communities and countries have an alternative to doubling down on fossil fuels. “In 10 years everyone will have ‘always known’ that solar and batteries were going to win,” Morgan Solar Executive Chair Mike Andrade writes on LinkedIn. With the disruption in the Strait of Hormuz roiling energy priorities around the world, Canada and the United States are among the shrinking number of countries that are still very keen on fossil fuel development. Understanding that gap is a first, essential step in spotting the opportunities ahead, and averting the deep economic as well as environmental and social risk we face if we don’t seize them. Thanks for reading The Energy Mix Weekender! Subscribe for free to receive new posts and support our work. Subscribe Mitchell Beer traces his background in renewable energy and energy efficiency back to 1977, in climate change to 1997. Now he and the rest of the Energy Mix team scan 1,200 news headlines a week to pull together The Energy Mix and The Energy Mix Weekender. Chart of the Week BYD Eyes 20 Dealership Locations After Canada Greenlights Chinese EV Imports ‘Sledgehammer’ Carbon Price Deal Boosts Emissions by 230Mt, Aims for Fall 2027 Pipeline Approval ‘Worse Than Harper’: Regulatory Rollback Would Stop Canada from Assessing Project Impacts, Critics Warn Electricity Strategy Aims for Doubling by 2050, Allows ‘Flexibility’ for Gas Power Plants Opposition Mounts as O’Leary’s Data Centre Approved in Drought-Stricken Utah Diluted Carbon Price Misses ‘Reality of the World We’re In’, Could Impede Diversified Trade: Climate Institute $200B in Clean Energy Investment Will Need On-Time Delivery, Reliable Policies, Trade Association Says ‘Sovereign Pipeline’: CEO Pitches to Keep Trans Mountain in Government Hands What a Supercharged El Niño Could Mean for Canada Canada’s future is electric, and here’s how a power grid superhighway would get us there (Toronto Star) The Perilous Waters of Hecate Strait (Globe and Mail) Saudi Aramco profits jump despite conflict in Middle East (The Guardian) Farmers confront rising cost of fertilizer and fuel as spring seeding under way (Canadian Broadcasting Corporation) Clarkson forecasts 24% decline in offshore oil, gas capital expenditures (Oil & Gas Journal) Pipe Dreams: How Oil and Gas Fail to Deliver Economic Development in Africa (Oil Change International) Developing countries must hold the pen to script the fossil fuel transition (Climate Home News) Iran war threatens the dream of a post-oil economy in the Gulf (Washington Post) U.S. Oil, Gas Work Force Hits Lowest Level Since 2022 (Rigzone) Why Polestar Is Doubling Down on Net Zero as Rivals Pull Back on EVs (Bloomberg) Why this Michigan utility plans to sell its hydro dams for $13 (E&E News/Politico) Levees can no longer save New Orleans (Vox)
Louisiana-Pacific: A Good Siding Business Offset By A Weak OSB Market
Louisiana-Pacific delivered strong Q1'26 results, with Siding segment pricing power offsetting volume declines and OSB losses. Read why LPX stock is a sell.
Kustom Entertainment, Inc. Announces Global Frequencies, a Massive EDM Event Coming to Kansas City’s Azura Amphitheater on Sunday, June 28, 2026
DJ Diesel AKA Shaquille O'Neal, Loud Luxury, TroyBoi, Alison Wonderland and many more to be announced, bringing an unmatched global dance music experience to Kansas City. OVERLAND PARK, Kan., May 13, 2026 (GLOBE NEWSWIRE) -- Kustom Entertainment, Inc. (NASDAQ: KUST) is turning up the volume with Global Frequencies, a high-impact EDM event set for Sunday, June 28, 2026, at Azura Amphitheater. Coming right after the World Game, Global Frequencies will bring an electric wave of sound, lights, and w
Inaugural Entertainment Announces Theatrical Release Date for Green Day Inspired Comedy, “NIMRODS,” Starring Mason Thames and Mckenna Grace, And New Partnership with Legion M
Inaugural Entertainment is turning up the volume with today’s announcement of the release date for its Green Day–inspired comedy NIMRODS, along with a new partnership with Legion M, the world’s first fan-owned entertainment company. The film will rock theaters on August 14. NIMRODS is a coming-of-age story about three friends…
Texas council says more resources needed to address complaints against behavioral health providers
The agency that oversees behavioral health and social work providers has about 1,000 "pending" complaints against providers — hundreds more than it has received in previous years. Texas Behavioral Health Executive Council leadership told lawmakers it may need support from the state to handle the volume.
How Will AI Reshape Politics? New Volume Co-Edited by Stanford Law’s Nathaniel Persily Explores the Stakes
STANFORD, Calif., May 6, 2026 — As artificial intelligence reshapes political campaigns, public administration, national security, public opinion, a
National Australia Bank's first-half cash earnings miss estimate
National Australia Bank reported weaker-than-expected first-half cash earnings on Monday as a higher credit impairment charge and a charge related to its software capitalisation policy offset robust growth in business lending volume.
LIVE in the DTL concert series kicks off May 29
As the days grow longer and summer settles in, the City of Lawrenceville is preparing to turn up the volume once again with the return of its LIVE in the
Nucor Logs Profit Rises, Boosted by Steel Mills Business
The steel manufacturer higher profit across its three main business segments compared with the fourth quarter, with particularly strong growth in its steel mills segment, which benefited from higher average selling prices and volumes across all product groups, the company said.
Derby entertainment lineup grows with big-name acts, new events and community impact
Derby season in Louisville is turning up the volume with major artists, new parties and events that give back to the community.
WELL Health Patient Volumes Surge As Primary Care Margins Improve
WELL Health Technologies (TSX:WELL) reported record patient volumes in Q1-2026, supported by higher activity in its Primary Care segment. Operational changes and an expanded affiliate network were key drivers of Primary Care growth and improved clinic margins. The company continues to add clinics to its network, extending its reach across its core markets. For investors watching TSX:WELL, the latest Q1-2026 update focuses on patient volumes and clinic performance rather than headline...
Volume 25 Science Of Speed
Our annual racing deep dive goes full engineering — from chassis and powertrains to tires, batteries, aero, and driver fitness, featuring machines like the new Corvette ZR1 and McLaren Solus GT.
Volume 25 Science Of Speed
Our annual racing deep dive goes full engineering — from chassis and powertrains to tires, batteries, aero, and driver fitness, featuring machines like the new Corvette ZR1 and McLaren Solus GT.
ACH B2B Payments Jump 9.4% as Businesses Abandon Paper Checks
Same Day ACH and B2B payments drove ACH Network volume growth in the first quarter. The network saw Same Day ACH payment volume grow 23.6% year over year
Vacancies for San Diego life science office space remain near record highs
Total leasing activity dropped significantly in the first quarter, with volume falling to 223,000 square feet — almost 50% less than the 2025 quarterly average of 450,000 square feet.
MINNEAPOLIMEDIA ENTERTAINMENT | This Weekend in the Twin Cities - Entertainment Guide: April 18 ~ April 19, 2026
Twin Cities weekend features major festivals, live music, sports, and community events, with MSPIFF and St. Paul Art Crawl anchoring a high-volume, multi-venue lineup.
Brain health: Staying more active during the day helps retain brain volume
Older adults with a more fragmented circadian rest-activity rhythm lost more brain volume in areas typically affected by Alzheimer’s disease, research has found.
Roman Space Telescope Science Platform Will Open New Frontiers in Space Science
Preparations for NASA's soon-to-launch Nancy Grace Roman Space Telescope have already introduced historic changes to the field of astronomy. Starting in 2027, Roman will deliver an unprecedented volume of complex survey data that will be impractical to download to individual computers for analysis. Astronomers and engineers at the Space Telescope Science Institute (STScI), working in close collaboration with the mission’s partners at NASA and Caltech/IPAC, have met these new developments head
GE Appliances invests $28M in Decatur plant, health clinic
GE Appliances has announced a $28 million investment in new manufacturing technology and a primary care clinic designed to serve employees and their families at its Decatur refrigeration plant. The company says the investment strengthens its Alabama workforce, deepens community ties and supports its broader $3 billion plan to expand U.S. manufacturing over the next five years. GE Appliances has operated in Decatur since 1977, and the company says the site remains its highest-volume refrigeration plant in the country.
Prediction markets on track for $1 trillion by 2030, but sports betting stirs legal storm
Bernstein sees prediction market trading volume hitting $1 trillion by 2030, but an ongoing legal fight over sports event contracts could test that outlook.
UBS chairman says key business decisions may soon become unavoidable
Key business decisions may soon become unavoidable, UBS Chairman Colm Kelleher said on Wednesday, turning up the volume on a tense debate about proposed Swiss capital requirements that has triggered growing pressure from markets and shareholders.
How Ardent Health (ARDT) Narrative Is Shifting As Valuation Resets And Operations Steady
Ardent Health is back in focus after analysts trimmed their fair value estimate from $12.73 to $12.44, a small reset that still reflects largely unchanged assumptions on the core business. The shift comes alongside Street commentary that balances slightly lower targets with improving Q4 execution, steadier payer denials, solid patient volumes, and views that the current share price may look undemanding to some. Read on to see how to track these evolving signals and what they could mean for...
Why rural hospitals in Pennsylvania and across the country are closing in increasing numbers – 5 myths about rural health care
Rural hospitals have high fixed costs, low patient volume and a large portion of patients insured through Medicaid, which typically pays less than private insurers.
Ask the Developer Vol. 21: Tomodachi Life: Living the Dream — Part 3 - News
This article has been translated from the original Japanese content. This interview was conducted before the game was released. In this 21st volume of Ask the Developer, an interview series in which developers convey in their own words Nintendo's th…
Ask the Developer Vol. 21: Tomodachi Life: Living the Dream — Part 1 - News
This article has been translated from the original Japanese content. This interview was conducted before the game was released. In this 21st volume of Ask the Developer, an interview series in which developers convey in their own words Nintendo's th…
B2BINPAY Rolls Out Partner Program With Direct Earnings on Referred Transaction Volume
SAN SALVADOR, El Salvador, April 14, 2026 (GLOBE NEWSWIRE) -- In B2B payments, new business often comes through trusted professional networks lo...
Radiology departments can cut costs and save the planet by limiting ultrasound waste
The modality uses a high volume of linens, gels and other disposable supplies that also can have a significant global carbon footprint in radiology, experts note.
A new generation of politicians of colour is emerging in France. The backlash speaks volumes
Local elections have led to a surge of racism in a country that still struggles to see itself as anything other than white, says Guardian Europe columnist Rokhaya Diallo
PlayStation To "Enhance Gameplay Visuals" With Buyout Ahead Of PS6
SIE buys the developer of AI-based technology that can transform a photo into a "volumetric 3D experience."
Sony's gaming division just bought an AI startup that turns photos into 3D volumes
Sony purchased an AI startup called Cinemersive Labs to help improve rendering techniques and gameplay visuals on future games.
Stablecoin payments go 'invisible' in Southeast Asia as crypto card business surges
StraitsX, a Singapore-based company, has seen rapid growth in its stablecoin card program, with a 40x surge in transaction volume and an 83x increase in card issuance between 2024 and 2025.
Vanderbilt Lung Transplant Program sets new record
The Vanderbilt Transplant Center is now the second largest lung transplant center in the United States by volume, with 149 lung transplants in 2025, the most ever in one year at Vanderbilt Health. The Vanderbilt Lung Transplant Program leads the nation in organ preservation and regeneration and is among the best in long-term outcomes, demonstrating the success of the interdisciplinary team in caring for these complex patients. Several features make the program unique in the United States, said Konrad Hoetzenecker, MD, PhD, professor of Thoracic Surgery and surgical director of the Vanderbilt Lung Transplant Program. Vanderbilt serves as a “second opinion center” and accepts most complex candidates that are turned down by other centers due to increased perioperative risk. This includes patients over 70 years old, patients requiring combined procedures with their transplant, multiorgan transplantations and sensitized patients (individuals who have pre-formed anti-HLA antibodies who are at higher risk for complications). The expertise and excellent outcomes have attracted patients far beyond the borders of Tennessee; almost half of Vanderbilt Health’s lung transplant recipients come from out of state. “Another unique feature is our minimally invasive transplant program,” Hoetzenecker said. “By using distinct surgical instruments and techniques, the incisions can be kept as small as 7 to 8 centimeters, which results in better healing, less pain and faster recovery. “This minimally invasive approach is embedded in an Enhanced Recovery After Surgery (ERAS) protocol, a multimodal, evidence-based perioperative care pathway designed to reduce surgical stress, minimize complications and speed up recovery. Our unique ERAS protocol, by a dedicated interdisciplinary approach, aims to improve recovery after lung transplant and reduce ICU and hospital stay.” The lung transplant program recently celebrated a milestone — 1,000 lung transplants since the program began in 1990. “This significant achievement reflects the concerted effort of a multidisciplinary collaboration by the Departments of Thoracic Surgery, Medicine, Anesthesiology and Critical Care,” said David Erasmus, MD, associate professor of Medicine and medical director of Vanderbilt Lung Transplant. Lung transplants have been attempted since the 1960s, but they were largely unsuccessful until the 1980s, when surgical techniques were refined and new antirejection drugs proved effective. Patient outcomes steadily improved from the 1990s to the present. Vanderbilt’s fourth lung transplant recipient in 1990, Pam Everett, is the longest-living, single-lung transplant known in the world, recently celebrating 35 years since her transplant. The Vanderbilt Lung Transplant surgical team is led by Hoetzenecker and Caitlin Demarest, MD, PhD, the surgical director and associate surgical director of the Vanderbilt Lung Transplant program. Erasmus is the medical director of Vanderbilt Lung Transplant along with Anil Trindade, MD, associate medical director and associate professor of Medicine.
L'Oréal's Skinbetter Science Launches Volume-restoring Facial Serum
L'Oréal-owned, physician-dispensed skin care brand Skinbetter Science has introduced its Ampra Volumizing Macro HA Serum, meant to plump facial skin.
Marathon has sold 1.2M copies across Steam, PS5, and Xbox
Alinea Analytics estimates show that Marathon has generated gross revenues of $55M via 1.2M copies sold on Steam, PS5, and Xbox: Looking at the split between Steam, PS5, and Xbox, Steam is clearly the main platform for Marathon, accounting for a little under 70% of the audience (800K copies sold). Meanwhile, PS5 takes about 19% (217K) and Xbox (including console, PC, and cloud) accounts for a bit over 11% or 133K. Marathon is technically a first-party Sony title, so seeing the home console struggle to break 20% of the volume is a notable data point for the ongoing platform-agnostic debate. PlayStation Studios online games will almost certainly continue being multiplatform (despite Sony reportedly pulling back on PC releases). Subscribe for free to get the most accurate games estimates in your inbox twice a week 🫶 Subscribe As for Marathon, the consensus among hardcore players who pushed through the awkward onboarding phase – myself included – is that it’s fantastic. The gunplay, aesthetic, and presentation are among the best in the shooter genre. A great game doesn’t always equal an immediate hit, though, as shown by our estimates. Things are looking lukewarm right now. But this might be one of those marathon-not-a-sprint situations. Had to, didn’t I? Why wasn’t Marathon a hit on the same level as Arc Raiders? One topic that came up in a lot of conversations at GDC this year was why Marathon hasn’t hit the same stratosphere as Arc Raiders. On paper, they’re both extraction shooters, and Marathon has the Bungie pedigree – the house that built the gold standard for gunplay in Halo and Destiny. Marathon’s neon-futuristic aesthetic also distinguishes itself from the gritty realism of Tarkov or the post-apocalyptic hope of ARC Raiders. But vibes can only get you so far for first impressions if the onboarding feels like a brick wall. Marathon is a sweaty PvP-focused experience with a first-time user experience and UI that I can only describe as dreadful. Players are dropped into a complex ecosystem where the UI, though visually striking, is functionally uninformative, forcing users to manually hover over nondescript, identical icons just to identify basic gear or weapon mods. This lack of clarity is compounded by punishing mechanics like a severe heat gauge for movement and a scarcity of vital resources, all without a clear tutorial or a low-stakes mode to learn the ropes. Most people – even top streamers and veteran shooter players – have no idea what’s going on in Marathon at first. Arc is on the complete other end of the spectrum. As we covered here and here, Arc Raiders offers a more collaborative, approachable loop where players often work together toward shared goals. And the objectives are instantly clear. To many players, this contrast only emphasised Marathon’s issues, especially during the testing period. Players understand the Arc Raiders loop within 30 minutes, while Marathon acts as a massive filter, chewing up newcomers and spitting them out before they can experience the depth of Bungie’s signature gunplay. What I’m getting at here is that the poor first-time user experience of Marathon’s Server Slam likely stifled launch sales, while the opposite was true for Arc. Let’s look at the pre-launch copies sold for each game during their respective Server Slams (launch-aligned) : Looking at the trajectory: Arc Raiders saw a massive 80% jump in copies sold during its three-day Server Slam (day -13 to -11). Players jumped in, realised the water was fine, and immediately opened their wallets. Marathon, meanwhile, saw a 49% increase in the four days following its Slam (Day -7 to -3). At the time of each game’s respective launch, Arc Raiders had nearly double the Steam footprint of Marathon – and word of mouth only continued to grow. Bungie could have had more time to fix the onboarding process had the beta happened earlier. But Marathon launched three days after the beta finished. These factors limited the launch sales quite a bit, I reckon. Marathon has found a niche audience, though Despite the friction-heavy start, the data suggests that those who survived Marathon’s onboarding are loving life. We’ve been tracking cross-platform DAUs, and while there’s the expected post-launch leakage, many players are sticking with it. After peaking at 478K total DAUs on its first Saturday, Marathon has settled into a respectable rhythm, holding 345K DAUs as of yesterday and averaging 380K DAUs across the weekend. Steam continues to do the heavy lifting here, consistently accounting for the lion’s share of the daily players. Players have been putting in the hours, too: On Steam, Marathon’s average playtime has climbed to 27.8 hours, significantly outpacing the console averages on PS5 (16.5h) and Xbox (17.3h). Even more telling than the averages: 22% of the Steam audience has surged past the 50-hour mark, and nearly 7% have already logged over 100 hours. Subscribe for free to get the most accurate games estimates in your inbox twice a week 🫶 Subscribe This data suggests that once the Bungie magic clicks, it hooks players deeper than the average extraction shooter. There’s also started to be a shift in the game’s discourse. Marathon launched as one of those games that’s cool to hate. But as Marathon’s 100-hour club grows, we’re seeing conversations around its mechanical merit outweigh the negativity. Several high-profile creators, who were initially vocal critics, have spent the last week coming around on the mechanical depth of the endgame. It’s a subtle but positive signal; the hate train is losing steam, and a new narrative about the game is emerging. Bungie faithfuls unite Another interesting metric in Marathon’s first few weeks is who, exactly, is playing. Bungie leans heavily on its prestige as the “makers of Halo and Destiny,” in its marketing, and that message has clearly hit the mark. On Steam, the gravity (hammer) of Bungie’s previous work is unavoidable. A staggering 78.2% of Marathon players also played Destiny 2. The trend carries across other platforms, with 74.2% of PS5 players and 82.7% of Xbox players also having played Destiny 2. The Halo legacy lives on, it seems. More on that in a bit. While Destiny 2 went free to play, these numbers still represent a high-intent migration of a fanbase that trusts Bungie’s specific brand of kinetic gunplay and cryptic world-building. The Xbox data adds another layer of legacy. About 85.7% of Marathon players on Xbox have played Halo Infinite, while over half of the Steam audience has spent time in Halo Infinite and 36.1% in the Master Chief Collection (a paid collection of the old Bungie-made legacy games). Interestingly, we see a 55.9% overlap with ARC Raiders on Steam. Overlap is even higher there on PlayStation (60.5%) and Xbox (66.5%). And there’s also significant crossover with Helldivers 2 on all platforms, too. Subscribe for free to get the most accurate games estimates in your inbox twice a week 🫶 Subscribe Bungie has found some of its fans with Marathon, and the challenge now is keeping this engaged in a high-stakes PvP environment when they’ve spent the last decade primarily enjoying the power fantasies of PvE. On that note… Go the full 26 miles? Or cut and run? Time for some could’ve, should’ve, would’ve. These things would have improved Marathon’s performance at launch: A more robust onboarding process, perhaps in the form of a short single-player/PvE campaign. We know Bungie fans love this stuff. A traditional arena-based mode akin to Destiny’s Crucible could have been a bridge for the cautious players who’d have been otherwise deterred by the Server Slam. It’s also a great palate cleanser after getting merked. Introducing a dedicated PvE environment would have similarly diversified the conversation and lowered the barrier for the Bungie faithful who found the pure PvP extraction loop too abrasive. PvE is safer than PvP these days. There’s an argument that a thin PvE mode would have just felt like a budget Destiny, potentially hurting the brand more. But given how dire the FTUE is, I think it would have been a net positive. Any kind of tutorialised loop that demystifies the stakes, really. While there is merit in a studio sticking firmly to a singular creative vision, and going all in on the hardcore extraction loop. Less forgiving is the technical reality is that the user interface and first-time user experience (FTUE) were not at a commercial standard for launch. Subscribe for free to get the most accurate games estimates in your inbox twice a week 🫶 Subscribe In a landscape where player time is oversaturated and the most contested currency, a flawed FTUE is a critical failure point. But it’s not all doom and gloom, as Marathon has an incredible, unique gameplay loop, suggesting that financial success is still attainable if Bungie can pivot effectively. Bungie and PlayStation now face a difficult strategic crossroads, though – one within a challenging games market. They could: Double down on Marathon with a long-term Rainbow Six Siege- or No Man’s Sky-style recovery plan, which is something I heard Last Stand Media’s Chris Maldonado mention last week. While this could be a sunk-cost fallacy in action, it could eventually yield the audience the game’s mechanical depth deserves. Shift focus toward the inevitable Destiny 3 or another project, mitigating the escalating opportunity cost and cutting their losses, so to speak. Doing both is an expensive proposition, given the high overhead and burn rate of operating out of Bellevue, Washington. With Sony recently demonstrating a lower threshold for underperforming studios and projects, the margin for error has vanished. Whatever happens, the next six months will determine whether Marathon becomes a cornerstone of Sony’s live-service portfolio or a cautionary tale of vision exceeding accessibility. I’m hoping it’s the former, because Marathon rocks. As always, hit subscribe to get updates on Marathon and other relevant games. Subscribe Want to get your hands on our data for yourself – for free? We’re offering a free trial of our platform for games companies. Send us a message here, or reply to this email, and we’ll set you up. The last word Reply to this email – or reach out here – if you have any feedback for the newsletter – or want to request a game for us to cover. [Alinea Analytics boasts the most accurate PC and console estimates in the business. Game makers use our platform to understand their audience, keep an eye on the competition, monitor sales trends, and spot new opportunities. We equip game studios and financial institutions with accurate data and the confidence to make smarter, data-driven decisions. Want to talk about all things games market data? We’d love to chat!]
Nintendo reportedly adjusting Switch 2 production after weak holiday sales
Sources say lower production volume is expected to continue in April
Smart Glasses Are Getting Shamed Into Covering Their Cameras
The Inmo Go 3 has a camera cover that speaks volumes about smart glasses right now.
CFTC Urges Prediction Markets To Partner With Sports Leagues
CFTC issued guidance and an ANPRM for event contracts. Sports—up to 90% of volume—are a focus of the guidance encouraging platforms to partner with sports leagues.
Book review: Hands, Wrists, Fingers: Creative Health for Musicians
Philippa Bunting reads Pedro de Alcantara's volume on boosting health for the curious musician, including some novel arm, wrist, hand and finger exercises for string players
Kalshi Still Needs Sports, Even as Courts Close In
Monthly trading volume on Kalshi hit $10.4 billion in February, a record for the company, and the firm is set to outperform that number this month.
College Sports Commission CEO says system struggling with volume of ‘manufactured’ NIL deals
Some CFB deals guaranteed millions of dollars without having yet received approval through NIL Go, the clearinghouse used by the CSC.
Samsung Galaxy S26 series' US pre-orders are up 25%, the Ultra is on top
This report reveals that the Ultra is absolutely crushing its two siblings, the S26 and S26+. Samsung US reports that the pre-order volume for the new...
Messi has long steered clear of politics. Does his visit to Trump's White House mark a change?
Although Messi was silent throughout, his appearance seemed to speak volumes for a player whose politics have largely been shrouded in mystery.
Fighting to Protect the Entertainment Industry
For decades California has been the undisputed global epicenter of film and television production. Over the past several years, the volume of film and television production shooting in California has
BrightSpring Health Services Touts 2026 Growth, EBITDA $760M-$790M at TD Cowen Health Care Conference
BrightSpring Health Services (NASDAQ:BTSG) executives outlined expectations for another year of broad-based growth and margin expansion during a presentation at TD Cowen’s 46th Annual Health Care Conference, with CFO Jennifer Phipps highlighting volume growth, operational efficiency initiatives, and
Bureaucracy Index 2026: Business sector hit hardest
The Bureaucracy Index, which tracks the growth in the volume of applicable German federal laws, has once again reached a record high. Since 2010, the volume of legislation has risen steadily, with no structural reversal in sight. The scope of legislation continued to rise in 2025. Despite commitments to reducing bureaucracy, regulation has not eased.
What Can a Picture of Your Poop Tell You About Your Health?
Throne, a startup based in Austin, has developed a toilet add-on that measures gut health through things like frequency, volume, and color of bowel movements.
Australia's Star Entertainment narrows first-half loss
Australia's Star Entertainment Group reported a smaller loss for the first half on Friday, supported by seasonally stronger trading volumes for the second quarter of fiscal 2026.
Tariffs aren’t slowing down a soaring Long Beach Port, but consumers and businesses feel the pinch
The uncertainty hasn't stopped record-breaking cargo volumes. But with the costs being passed on, smaller businesses say they’re freezing hiring and running out of stockpiled inventory.