SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " newsletter " 817 found 🔀 AI-powered Shuffle
🏫 Y! Sports Biz: Time to take the cap off?
The search for answers in college sports continues.
⚽️ Y! Sports AM: Lasting legacy
The 2026 World Cup is gone, but those five magical weeks across the U.S., Canada and Mexico won’t soon be forgotten.
New Jersey’s Noncitizen Voting Reveal Is a Nightmare For Democrats | WSJ Politics Newsletter for July 22
Plus, Pete Hegseth says the cost of the war in Iran is now $37.5 billion, and the administration freezes $1 billion in Medicaid funding to California and Minnesota.
🏈 Y! Sports AM: Grass vs. turf
NFL players aren’t pleased that the natural grass that covered their fields during the World Cup is already being replaced with the artificial turf they know and hate.
College football’s best QBs for 2026, plus poll results
The Pulse Newsletter 📣 | This is The Athletic’s daily sports newsletter. Sign up here to receive The Pulse directly in your inbox. Good morning! Don’t spy on anyone today. Coming up: 🏈 CFB QB tiers 📺 Clark out at ESPN 🗳️ Your poll results As one football leaves us, the next one settles in right on time. The World Cup is in the past now. American football is nigh. It’s time to switch our focus. At least until later in this newsletter. We’ve entered one of my favorite parts of the college football preseason: when predictions feel a little more weighty, just...
From Attention to Intention: Inside the Vogue Business x Pinterest Cannes Brunch
Less URL, more IRL. Brands are changing their strategies to account for more time spent offline.
UFC Freedom 250 Fails to Knock Out The Ratings
(Welcome to my weekly streaming ratings report, the single best guide to what’s popular in streaming TV and what isn’t. I’m the Entertainment Strategy Guy, a former streaming executive who now analyzes business strategy in the entertainment industry. If you were forwarded this email, please subscribe to get these insights each week.) If UFC fans wanted one image to say, “Hey, Paramount+ is crushing it with their UFC rights deal,” I could provide that image. Here it is: (Reminder: this is my creation of the Nielsen Top 30, since Nielsen doesn’t combine the lists or include sports. I take all three lists and combine them. Some streaming TV shows probably have higher ratings than many of the films on this list.) Look at that! UFC Freedom 250 is number one! It topped the Nielsen “Top 30” list for shows and films that made the top ten the week of 15-June. So if you’re a UFC fan or supporter of Paramount+, that’s the good news for you this week. This program topped the ratings charts for one week. Everything else is bad news, or at least a huge caveat to that story, which I’ll explain today in the first part of this week’s Streaming Ratings Report—for the weeks of 8-June and 15-June—which is a double issue since I’ve been writing on a bunch of topics recently. UFC Freedom 250 is one of the biggest streaming events of the year, and super relevant to Paramount+’s strategy, so it merited its own article. Let’s dive in! (Reminder: The streaming ratings report focuses on the U.S. market and compiles data from Nielsen’s weekly top ten viewership ranks, Luminate’s Top Ten Data, JustWatch and Reelgood interest data, Samba TV household viewership, company datecdotes, Netflix hours viewed data, Google Trends, and IMDb to determine the most popular content. While most data points are current, Nielsen’s data covers the weeks of June 8th to June 21st 2026. You can find a link to my terminology here.) Subscribe Check Out My Interview on UFC 250 at MMA Draw After you read this article, if you want even more thoughts on UFC and Paramount-Skydance/Paramount+, I did a written interview with MMA Draw. They asked me to answer some questions about UFC Freedom 250, and I was happy to chat with them. Find it here: [ The MMA Draw Newsletter Did Paramount really overpay for the UFC? What the data tells us so far If you know the history of American television, you also know that combat sports is often a leading indicator of the future… Read more a day ago · 10 likes · 1 comment · Nate Wilcox and Zach Arnold ](https://www.themmadraw.com/p/did-paramount-really-overpay-for?utm_source=substack&utm_campaign=post_embed&utm_medium=web) I never thought I’d need a combat sports newsletter in my life, but the good folks at MMA Draw publish an excellent one on UFC, MMA, pro wrestling, boxing and more, analyzing both the sports themselves and the politics, economics and antitrust issues that impact them. Check the article and their newsletter out! Paramount+ Has Its Best Sporting Event of All Time…But Was It Worth It? Before we look at the UFC Freedom 250 data in particular, let’s talk about what we can’t say. Namely, let’s start with the lack of comparisons. First off, I’d love to put a chart out comparing this fight to past UFC fights on Paramount+…but we don’t have the data. This is the first time we’ve gotten Nielsen data about a Paramount+ UFC fight. As far as I can tell, Paramount provided data for the first fight, but it was a proprietary datecdote (saying it had “an average minute audience” of 5 million “views”) and then, for two fights, we got the linear viewership numbers when they aired on CBS, but no streaming data. Everything else was crickets. We also can’t compare this fight to other fights/combat sports on streaming, in particular the MMA and boxing, because Netflix also didn’t use Nielsen to track those events, opting for TVision and VideoAmp, respectively. (This isn’t Paramount’s fault, but does still suck.) We also can’t compare to UFC’s fights that used to be on ESPN+, since we don’t have any data for that, plus Disney+ didn’t have marquee fights. The comparisons would not be apples-to-apples. Can we compare to past Pay-Per-View fights? Absolutely not. The comparisons would absolutely NOT be apples-to-apples. That didn’t stop Paramount+, though, who bragged that their UFC events have reached drastically more people than past PPV fights. Duh. Sorry, but I gotta make this point again. A basic tenet of economics is that the cheaper something becomes, the more people consume or buy it. That’s Econ 101. (Sometimes pundits call things “Econ 101” that are actually like Econ 210 or even PhD-level economics, but no, this is really like first or second class basic economics.) Yet I still see one analytics firm consistently say that more people watch films on streaming than PVOD proves streaming which means that the streaming window is more valuable than the PVOD window. No, it’s not! Same thing here. Pay-Per-View events back in the day could be really, really, really expensive! So whole groups of people pitched in to buy them. That increased the perceived value of, say, the Mike Tyson fight. Or a UFC numbered event. So yes, the fact that Paramount+ makes numbered UFC fights essentially “free” if you’re already a Paramount+ member means consumption will go up. Obviously. Same for Netflix and their boxing matches. They’re talking about fights that used to cost consumers, in some cases, $50 in 1996…which is over $100 in today’s dollars. Over 1.6 million people paid that to watch the Tyson-Holyfield fight! Again, streaming is essentially “free”. Or $10 to $20, depending on what streamer we’re talking about and what tier you’re on. No wonder more people are “watching”. (Plus, Nielsen’s out-of-home viewing also helps these numbers.) UFC Freedom 250 Did Well…But I Have A Lot of Worries So what can we compare the fights to? Well, the good news is Nielsen put out that the fight averaged 7.0 million viewers for UFC Freedom 250, which is a solid number for a fight. We also know the length, at roughly 4 and a half hours. (I saw different run times, but this seems to be the consensus considering it started at 8 pm, had a delay and then finished after midnight on the East Coast. If you assume a shorter run time, then yes, the total hours viewed would go down.) That means I have the two numbers needed to add this to my Nielsen database. And then…I can compare this viewership to the NFL: And, uh, not great. But also within striking distance, mainly because the runtime for this event was so long. I’d also add that this event had viewership equal to a regular season NFL game on streaming, but if anything, it was more comparable to an NFL playoff or Super Bowl-esque event. And you can compare viewership to the top football games on broadcast, cable and streaming, and it’s not impressive at all: We can also compare it to other sports that week, including the NBA Finals and start of the World Cup: Again, not great. The NBA generated roughly four times as many average viewers each game for its NBA Finals. The World Cup has similarly big numbers. Also, that’s just a tiny fraction of the 25 most watched sporting events each week. The NBA, NHL and FIFA World Cup had many, many more games racking up hours. We could also compare this to other streaming programs to get an idea of “is this a good investment?” and here is how it ranks compared to other top Paramount+ programs: The worry here? Well, unlike scripted programming, which has rewatchability, older fights/sporting events have very little library value. Very, very few people are rewatching these fights, especially years from now. Paramount has also released datecdotes bragging about their subscriber numbers. Earlier this year, they claimed that the first UFC fight on Paramount+ brought in 1 million subscribers. Then, in their quarterly earnings report, they only ended up with 700K subs. Not great! They claimed they dropped lower-value international subscribers, but that’s why I tend to discount subscriber additions when they’re leaked to the press.1 I expect we may see a bump again for UFC Freedom 250, but I’d caution using subscriber growth so soon after these events to judge the success, since new subs with high churn (see Peacock) aren’t great either. Also, analysts often want to attribute all subscriber growth to their favorite/pet show, and that just doesn’t make sense. The biggest caveat for UFC Freedom 250 and Paramount’s very first UFC marquee event is that these could be high watermarks for the sport. UFC Freedom 250 had an incredible amount of earned media coverage compared to most UFC fights. I mean, it had wall-to-wall national news coverage in the lead up to the event. (The first fight also had a lot of promotion from Paramount since it was first.) Other fights could reach this bar—say the Conor McGregor return to the Octagon—but they’ll be fewer and far between. Was This Deal Worth It? All to ask: is this Paramount deal worth it? In this case, I think the UFC Freedom 250 numbers are more distracting than helpful. This fight did well and compares well to other top sporting events. But we know that the first marquee event was at least a third smaller, if Paramount’s own data is to be believed. And it’s likely the other fights are much, much, much smaller. And then you get to the paycheck that Paramount-Skydance paid. FIFA’s World Cup cost about the same for Fox, but clearly generated multiples more total viewership. (Though it’s only every four years.) The NBA is much more expensive, but until the playoffs, they likely didn’t pay for itself. Even still, Disney, NBCUniversal and Amazon Prime Video likely overpaid. So, in that context, the NBA may be an overpay that makes the UFC look not so bad. But two overpays don’t make an underpay, to paraphrase the old cliché about wrongs and rights. And looking at UFC Freedom 250 as the likely ceiling of MMA on Paramount+, Paramount-Skydance likely paid too much. Share 1 I would love regular reports on subscriber additions by programs, but as is, it’s mostly leaked or rumored in haphazard ways.
Y! Sports Biz: The grass is always greener
The turf war between the NFL and its players rages on...
🏈 Y! Sports Biz: The grass is always greener
The turf war between the NFL and its players rages on...
🏆 Y! Sports AM: Spain wins the World Cup
Spain's defense got the last laugh over Argentina's bag of magic tricks, as La Roja beat La Albiceleste, 1-0, to win their second World Cup title.
Apple Reportedly Worked on Two 'Extreme' Chips
Apple once developed "M2 Extreme" and "M3 Extreme" chips for the Mac Pro, but it decided not to release them, according to Bloomberg's Mark Gurman. He first reported on this topic in 2022, and he touched on it again in his Power On newsletter today. "Extreme" chips would have had twice as many CPU and GPU cores as Apple's "Ultra" chips. "The idea was to offer twice as many graphics and main processing cores as that chip," he said.
Texas Tech’s story gets even slimier, plus niche college sports
Until Saturday is The Athletic's free college football newsletter.
🗽 Y! Sports Biz: Name your price, Jalen Brunson
Inside this year's $90 million Fanatics Fest.
What to Know Ahead of Trump’s Primetime Speech | WSJ Politics Newsletter for July 16
Plus, President Trump weighs expansion of the Iran war, and more than 100 House Democrats vote against $3 billion in military aid to Israel.
The States Try to Topple WarnerMount…Thus Begins the Local Antitrust Era
(Welcome to the “Most Important Story of the Week”, my bi-weekly strategy column analyzing the most important (but often not buzziest) news story of the last two weeks. I’m the Entertainment Strategy Guy, a former streaming executive who now analyzes business strategy in the entertainment industry. Please subscribe.) Well, it looks like it’s time for another strategy column. Can I finally avoid writing about M&A? No, it seems I cannot. Admittedly, I’m a week early with this column, since I usually put it out every other week. But this news couldn’t wait. This will make three “Most Important Stories” in a row with a merger or acquisition as its centerpiece. First, Roku-Fox (an acquisition), then Comcast-NBCUniversal (a divestment!), and now the State AGs and the WGA’s lawsuits against Paramount’s pursuit of Warner Bros. Discovery (antitrust). M&A is usually the “most important” topic any given week, simply because a giant company merging or breaking up (or preventing those outcomes) can have the biggest impact on the streaming board. If you think about these companies as players in a game, changing the number of players is one of the biggest changes you can make. I shouldn’t really complain, either, since this lawsuit is very good news for customers and suppliers (econ speak for talent, workers and indie studios in Hollywood). So let me answer some questions about this potential trial, along with (shudder) making some heavily caveated predictions. I’ll also look at whether Hollywood must consolidate, whether or not the states can win, trouble at X-Box, Netflix’s YouTube binge, and more. Plus, I have five images that visualize this merger and the harm, including three brand new data looks you’ve never seen before. Subscribe Most Important Story of the Week - Can The States and the WGA Stop Hollywood’s Consolidation (Crisis)? If every other newsletter and news outlet is writing about the same story, I try to avoid writing about it as well, but I can’t ignore a story this consequential. The story of the last year was the fate of Warner Bros. Discovery, and this development potentially extends that saga into 2027. As I tried to figure out my angle, I realized, like my last column, I’m again faced with a series of questions. These questions, though, are much more forward-looking. Will the states win? Will the WGA win? If so, what happens to Warner Bros. Discovery? Either way, will this chill the market for future mergers? So you know what that means: predictions. About the future, no less, the hardest thing to predict.1 Just remember: nothing here comes with a guarantee. And the more confident someone is in their predictions, the less you should trust them. This situation is incredibly fluid, nuanced, uncertain and tenuous. So let’s try to explain what may happen. Question: Why File this Lawsuit? I’ll admit, a few months back, I was fairly pessimistic about the fate of this lawsuit. Rumors had started bubbling up that the state Attorneys General (in particular California) wanted to settle with either some minor divestments (usually CNN) or behavioral remedies. And that tracked for me: the states usually settle lawsuits, like the recent John Deere right-to-repair suit. Yet, they plan to fight this. (As they did the LiveNation-Ticketmaster monopolization trial and the Nexstar-Tegna merger.) Honestly, that also makes a ton of sense. Frankly, this move is just good politics for these State AGs. Most are still running for higher and higher office in blue states—some folks have emphasized that only Democratic AGs joined this suit, but given the Ellison/Trump ties, and fears of retribution, that tracks—and a high profile case like this will help them move up the electoral ladder, especially since Paramount and its leadership (the Ellisons, father and heir) have sided with the other side of the political aisle. That makes them unsympathetic to Democratic voters and Hollywood workers in particular. Why did this lawsuit happen? In addition to the very real concerns about industry consolidation, this is why. That said, I don’t think we would have seen this lawsuit for Netflix and Warner Bros., simply because they’re more sympathetic and aligned with Democrats. But those consolidation concerns are real. The “town”—meaning Hollywood and such—really is seeing the damage of mergers on this industry. That’s why the WGA also filed its own lawsuit in defense of workers as well. (Wildcard: What about Europe? Will they try to stop the deal, too? There have been some rumors out of the UK they may try to fight the deal, and UK enforcers just stopped a Getty Images-Shutterstock tie up, so there is precedence. This argument could go either way, though. On one hand, the EU doesn’t need to step in, cause they states are handling it. On the other hand, this could make the EU’s case easier. Just imagine if both sides coordinated. I’ll simply say, “We’ll see!”) Question: Will The State AGs or the WGA Win? Can the state AGs play David to Paramount-Skydance’s Goliath here? That’s really the whole thing, isn’t it? If you know this result, you could make a lot of money. When things are uncertain, it’s tempting to shrug and say, “Eh” meaning it’s a 50/50 proposition. I wouldn’t, though. When in doubt, you should expect that the merging parties succeed. AT&T did successfully buy Warner Bros., after all, and Disney bought Fox without any challenges. Many judges are extremely sympathetic to mergers, and I’d bet the state AGs get a judge who will allow the merger. (Even Obama-appointed judges often allow mergers.) As I understand it, we’ll see two main attacks. First, theatrical films. The AGs are arguing that, when it comes to share of box office and the number of both “wide releases” and blockbuster (or “tentpole”) films, the merging parties will have over 27% market share. Now, the Supreme Court once ruled from on high that any merger that exceeds 30% is presumptively illegal, but that’s guidance, not an ironclad bar. Still, the states will have to argue that this is close to having too much power, and with that power, this will likely further worsen the theater/studio splits in particular. Indeed, as Matthew Stoller pointed out, “just five studios are responsible for 95% of all blockbusters; if this merger goes through, then Paramount and Disney will control 60% of that.” So yes, movie studios will be very concentrated after this merger. Want me to visualize some of that? Well, here’s the share of films that grossed over $200 million at the domestic box office since 2022. (Note: this isn’t all films released in over 3,000 screens, but it is a good look at market power.) First, here are the 43 films by studio: Notice all the blue (Disney), orange (Universal), and purple (Warner Bros)? Yeah, those studios are powerful, and this combines Paramount with one of them. Here’s the look by studio and share of the films that grossed over $200 million: Now, if you look at that and also think, “Huh, should we break up Disney?” I’m with you. I’ve seen some folks poo-poo this idea that this is a real category, but it is! For an upcoming article, I’ve been pulling data on the share of top 100 films at the box office as a share of total box office, and it’s massive. Here’s the chart: (This analysis looks at The-Number’s top 100 films and total domestic box office each year.) To be clear, tentpoles make up 80.7% of the box office each year, so I do think it’s a genuine market. (To be clear, films grossing over $50 million make up 80% of the domestic box office, and films grossing over $100 million make up 64.1%.) I mean, the top 100 films at the box office make up 95% of each year’s grosses. Worse, the combined studios will likely cut output to flex that market power. Everyone can just look at what happened to Disney and Fox to see the precedent. (With fewer films, the remaining theaters have to give more for those few films that remain.) Here’s an image I’ve used a lot, the share of wide-release films from Disney and Fox over time: The AGs will also argue that this consolidation will also impact the cable industry. In this case, the consolidation is actually worse, but that environment is…complicated. Paramount will argue that the cable industry is shrinking. That said, predictions that cable will “go to zero” also don’t look very well supported by the data, as the declines are shrinking, meaning “cable” or “vMVPDs” will likely stabilize at some point. Can the state Attorneys General win on those two main arguments? I honestly don’t know. Again, I’d bet no, since history in general supports that, but it depends on the judge/jury and how they interpret the arguments. Notably, Paramount won’t face accusations about monopoly power in other areas, like streaming, news, sports rights, or vertical integration. I tend to disagree with leaving out sports rights, but I also see the appeal for a simpler case. The states also aren’t really pushing novel theories about labor harm either, which should help. (By the way, Sean McNulty at The Ankler wrote a great run through of potential options, and Capitol Forum also wrote a great paper on theatrical consolidation. Both these pieces predated the lawsuit. Matthew Stoller is also out with his analysis of the pros and cons of the case too.) In some ways, the WGA’s case is even stronger. Quoting Sean McNulty’s summary: “The WGA is citing WARNAMOUNT as crossing a 30% market share in multiple sectors, a number that the Supreme Court has precedent for deeming “presumptively anticompetitive” in a market. According to the WGA numbers, WARNAMOUNT would have represented: - 35% of film writing jobs between 2021 and 2024 - 36% of TV writing projects between 2022 and 2025 - 38% of overall deals between 2021 and 2024” Notably, antitrust enforcers did win recently in the Penguin-Simon & Schuster merger by focusing on labor impact, so don’t count this thinking out. (Wildcard: Will the states try to get a jury trial? Most likely no, they’ll let a judge handle it. If I’m them, though, I’d try to put this in front of a jury. Juries tend to understand monopoly power in a more realistic way than judges faced with legions of economists.) Question: What if They Win? What if They Lose?
If Mike Johnson’s Phone Could Talk…or Sleep | WSJ Politics Newsletter for July 15
Plus, economists foresee stubborn inflation with strengthened growth and employment, while the U.S. and Iran reckon with shrinking options to end the war
An All-Star goodbye? Plus, another World Cup surprise
The Pulse Newsletter 📣 | This is The Athletic’s daily sports newsletter. Sign up here to receive The Pulse directly in your inbox. Good morning! Earn some boos today. Coming up: 😳 Spain shocks France 🤨 Strange vibes at ASG 🔍 Another Leonard investigation There are days when the important sports events pile up. Sometimes I stare at the metaphorical mountain and feel lost. What stories are most important? What slice of the sports world am I leaving on the cutting room floor? Then I looked at my TV screen and saw the box score of the MLB All-Star Game. Nine’s a good...
Wednesday briefing: Do MPs have the will to stop mega-donors interfering in UK politics?
In today’s newsletter: The representation of the people bill has become a test of whether Britain can curb the surge in billionaire‑backed donations trying to influence how we run the country
College Football 27 and a rare victory for consumers
Until Saturday is The Athletic's free college football newsletter.
For Whom the Strait Tolls | WSJ Politics Newsletter for July 14
Plus, Lindsey Graham’s sister to fill his Senate seat, and how China’s Xi Jinping now manages Russia’s Vladimir Putin
This baseball newsletter is proving that smaller audiences are good business
By serving baseball’s biggest obsessives instead of chasing mass appeal, Lance’s Pitcher Notes is showing how niche media can thrive
⚽️ Y! Sports AM: The final four
The World Cup semifinals are set, with Spain, England, Argentina and France making up the chalkiest final four in tournament history.
The new* Home Run Derby, plus Pulisic’s future
The Pulse Newsletter 📣 | This is The Athletic’s daily sports newsletter. Sign up here to receive The Pulse directly in your inbox. Good morning! Watch your swings today. Coming up: ⚾ Vintage HR Derby 🎾 Sinner’s silky serve 🇺🇸 Pulisic’s future The Home Run Derby returns tonight from Philadelphia, where All-Star festivities are happening this week. It will be a radically different experience than what we’ve seen in recent memory. But that doesn’t mean it’s new. Quick catch-up before we get to opinions: Instead of outs, hitters will get a limited number...
M7 Ultra to potentially feature up to 1.5TB of RAM, finally matching 2019 Mac Pro: report
According to the latest Power On newsletter from Mark Gurman, Apple is preparing to include up to 1.5TB of RAM...
The last MLB Draft of its kind? Plus: Sinner makes Wimbledon final, again
The Pulse Newsletter 📣 | This is The Athletic’s daily sports newsletter. Sign up here to receive The Pulse directly in your inbox. Good morning! Let’s talk about high school. Coming up: ⚾ MLB Draft’s endangered future 👊 Ex-teammates brawl ⭐ Haaland-Kane clash Major League Baseball’s draft begins today at 1:30 p.m. ET on NBC. (Our live blog will be here.) If commissioner Rob Manfred gets his way, it’ll be the last draft before the rules begin to change, and what comes next will be worse. MLB and its player union continue to swap proposals ahead of a...
⚽️ Y! Sports AM: Liberté, Égalité, Mbappé
Kylian Mbappé delivered yet again, leading France to a 2-0 victory over Morocco to bring Les Bleus within one win of reaching the World Cup Final.
A new 'Moana' sets sail with Catherine Lagaʻaia, Dwayne Johnson
Love movies? Live for TV? USA TODAY's Watch Party newsletter has all the best recommendations, delivered right to your inbox. Sign up now and be one of the cool kids.
⚽️ Y! Sports AM: Messi is inevitable
Argentina nearly suffered a stunning upset against Egypt in the Round of 16. Lionel Messi had other plans.
College Football 27, the good, bad and ugly. Plus: World Cup lessons
Until Saturday is The Athletic's free college football newsletter.
Politics Chat, July 7, 2026
A newsletter about the history behind today's politics.
The Big Business Of Buying Comebacks
Also in the Forbes CFO newsletter: Job market continues slow growth, Trump says no to renewing USMCA, AI hasn’t impacted credit market.
The crumbling employer-based health insurance system
Today's D.C. Diagnosis newsletter covers maintaining diversity in drug trials and troubling trends in employer-based health insurance.
Brigham and Women’s doctor combines medical expertise, journalism
Dr. Jeremy Faust saves lives in the ER and breaks stories with his Inside Medicine newsletter. He’s also testing the bounds of news reporting.
My newsletter made more than my CFO job, so I quit.
CJ Gustafson says he left a successful finance career after his newsletter business became more lucrative than his executive role.
Trump to Meet With Zelensky as Russia-Ukraine Battlefield Remains ‘Frozen’ | WSJ Politics Newsletter for July 6
Also, Trump faces obstacles to put the new Air Force One in his museum, and an inside look at Europe’s rupture with the U.S.
The wildest World Cup game so far, plus more on Balogun’s return
The Pulse Newsletter 📣 | This is The Athletic’s daily sports newsletter. Sign up here to receive The Pulse directly in your inbox. Good morning! Park the bus today. Inside: 🏴 England’s unthinkable win Balogun returns 🎾 Osaka shocker Any weekend with World Cup knockout games ensures a compelling experience. But even outside of those — which were scintillating, to be clear — yesterday was a banner day for winners across the sports spectrum. Let’s simply rank them: 1. England, sheesh This was slotted at No. 2 until the match unfolded.
WBUR's local politics newsletter returns next week
A lot happens in Boston every day. To help you keep up, WBUR, Boston's NPR News station, pulled these stories together just for you.
The Vogue Business Spring/Summer 2027 Menswear Size Inclusivity Report
Size inclusivity in menswear remains largely static across Milan and Paris, with this season also welcoming more polarized body ideals.
Long Reads for the Long Weekend
(Welcome to the Entertainment Strategy Guy, a newsletter on the entertainment industry and business strategy. I write a weekly Streaming Ratings Report and a bi-weekly strategy column, along with occasional deep dives into other topics, like today’s article. Please subscribe.) Happy Fourth of July weekend! As has been a tradition of mine going back to the beginning of the EntStrategyGuy website, I’m sharing my favorite long reads of the last year, like I did in 2019, 2020, 2021, 2024, and 2025. Let’s dive right in! Subscribe “Different Prices for the Same Ride: How Uber and Lyft Use AI to Get More Money Out of You“ by Derek Kravitz in Consumer Reports I don’t think surveillance pricing, like the kind described in this brilliant Consumer Reports article, is long for the world—it’s toxically unpopular—but we’ll see if either party takes on this issue. If I ran a political party focused on affordability, I would focus on a few pro-consumer and pro-market policies: Banning non-compete agreements. Ending surveillance pricing Eliminating junk fees (read more here...) Ensuring “right to repair” for consumer (and military!) products Capping excessive app store fees Stopping digital/algorithmic price-fixing tools. Preventing automatic subscription price increases. And more. If you want to fight inflation, there are a lot of great ways to do it quickly. Speaking of higher prices... “Secret Documents Show Pepsi and Walmart Colluded to Raise Food Prices Across the Economy“ by Matt Stoller in BIG Again, I think a political party should focus on lowering prices for consumers. And deals like this—Walmart making a deal/forcing Pepsi to offer the lowest prices at its stores and nowhere else—hypothetically lower prices at Walmart...but raise them everywhere else. “15 DUIs, still driving: California’s failure to take repeat drunk drivers off the road“ by Robert Lewis and Lauren Hepler in CalMatters CalMatters does terrific reporting in California, something the Golden State desperately needs more of, and this article is a great example of that. “PugLips: The next insanely popular thing you’ve never heard of…” by Simon Carless in Game Discover Co I thought that this parody article (and yes, it’s a parody, but I was definitely unsure at first) was hilarious and totally nailed how much tech/business journalism feels these days. Actually, three of my favorite articles this year were on hype in the video game industry, including Georg Zoller’s “The Video Game Industries Very Dark Night”—which I linked to recently and wrote a follow-up here—and Owen Mahoney’s “Derek Zoolander, Videogame Exec”. In particular, I like Mahoney’s focus on user experience as a guide to what trends will actually grab hold of customers. “The Matrix Lies“ by Evan Shapiro in Media War & Peace Evan Shapiro’s first person account of his experience with AI was hilarious. I think LLMs capabilities have significantly grown from last summer, and yet...my editor/researcher just had an abysmal experience using an LLM to do a quite basic task (which our LLM normally does each week) and the LLM made a mistake on every single data entry...along with seven different mistakes affecting twelve of the twenty or so entries, including mistakes that are explicitly spelled out in the prompt. That’s a brutal failure rate. Again, if you use AI/LLM for data collection, you need to take a lot of extra steps to verify and check the data. “Ghosts in the Balcony: A Cross-Country Trip to 58 Theaters Fighting to Survive“ by Matthew Frank in The Ankler I thought Matthew Frank’s pitch to head across America to visit theaters sounded insane aggressive at the time—at least it felt that way to someone a decade older than him; man, to be in your twenties again, am I right?—but I knew the result would be great. And it was, a terrific feature by a great young writer. Also, I loved Matthew’s recent article on who’s getting the precious few entry level jobs in Hollywood. (Hint: nepotism.) “Disney erased FiveThirtyEight“ and “Did Las Vegas get too greedy?” by Nate Silver in Silver Bulletin I love media history and analysis, and there’s no one better to get the history of FiveThirtyEight than from Nate Silver, who wrote about his personal experience in one of my favorite pieces from this year. I also loved Nate’s breakdown of what’s causing Vegas’ woes, but I’ll offer one criticism, summarized as “Might I suggest antitrust?” Many centrists/center-right/libertarian thinkers (Nate is self-described as the latter) often don’t consider consolidation or antitrust as factors in policy issues like housing, America’s military readiness, or, in this case, Las Vegas. Even if libertarians want to debunk antitrust/consolidation concerns, I’d love to read that debunking. In this case, Vegas is incredibly consolidated (though it also has been for a long time) and I’d have loved to read Nate at least contending with this factor, since he addresses almost every other potential factor for Vegas’ decline. “Why Microsoft’s Carbon Removal Pullback Is Such a Big Deal“ by Robinson Meyer in Heatmap News I’m a big supporter of carbon removal efforts, but this nascent industry faces a lot of headwinds, including this big move most recently. I think it’s clear that solar panels and batteries should be able to get the world to its carbon footprint goals, but effective carbon renewal remains necessary to prevent the worst impacts of global warming. “AI is killing the cheap smartphone“ by David Oks LLMs and AI will impact the world in ways we’re not ready for, and already, third world countries are seeing the prices of cheap cellphones skyrocket due to the cost of chips skyrocketing. This article by David Oks is a terrific breakdown. “100 Days of Madness: Netflix, Paramount, Warner and the Future of Hollywood“ by Wade Major at Hollywood Heretic Wade Major dove deep into Hollywood/streaming’s financials in this must read piece. Not that I agree with everything in this article (read my take on Warner Bros./Paramount here) but the analysis is top notch. I think many people discount how quality thinking, regardless of the argument/conclusion, will make you a better thinker. “Erased by the UFC: Frank Shamrock, The MMA GOAT of the 20th Century“ by Nate Wilcox in The MMA Draw Newsletter Growing up playing the UFC fighting game on the Dreamcast, Frank Shamrock was my favorite MMA fighter, and this history/tribute to him was great. Other Fun Reads “The Hardest Part Of History To Tell Is How It Felt“ by Craig Fehrman at Defector “Unmasking the Sea Star Killer“ by Craig Welch at bioGraphic “What Could Save the Industry? Fin-Syn“ by Richard Rushfield in The Ankler Alex Rollins Berg in Underexposed on movie bumpers, pillow shots, Disney trash cinema, cult films, and Casablanca. David H. Montgomery in YouGov’s The Surveyor on punctuation marks, condiments, dinosaurs, and comic strips and kids media. “How Medium finally pivoted its way to profitability“ and “Why the best journalists on YouTube are all former Vox employees“ by Simon Owens in Simon Owens’s Media Newsletter “It’s Not Just You, Netflix Shows Have Gotten Slightly Shorter: Here’s What the Data Says“ by Kasey Moore at What’s on Netflix “Numlock Awards: How Diane Warren became the biggest loser in Oscar history“ by Nathaniel Rakich and “Numlock Awards: The Oscar Bait era is over. The Oscar Chum era is here.” by Walt Hickey & Michael Domanico at Numlock Awards
Why Norma Kamali Swapped Fashion Shows for Team Fitness
The New York-based designer says free exercise classes are an investment in her team’s mental health and her brand’s resilience.
The Supreme Court’s Campaign-Finance Decision Is Actually Good
Or at least, it’s not bad.
America Rings In 250th Birthday Amid Deep Polarization and Political Rifts
How does a deeply polarized country come together to have a birthday party?
STARTO ENTERTAINMENT Launches the “STARTO NEWS ARCHIVES” Newsletter Service
TOKYO--(BUSINESS WIRE)--Jun 30, 2026--
STARTO ENTERTAINMENT Launches the “STARTO NEWS ARCHIVES” Newsletter Service
Japanese talent agency STARTO ENTERTAINMENT, Inc. has launched the “STARTO NEWS ARCHIVES,” a free digital newsletter service for fans across Asia and beyond ...
Wilmington Small Business Coalition: Building Momentum in 2026 by Heather McWhorter
This article was contributed by Lydia Thomas, UNCW CIE Program Manager. North Carolina continues to be one of the best states to start a business and in 2025, Wilmington, North Carolina earned a spot on the GoDaddy list of the top 10 most entrepreneurial cities in the U.S. While many know Wilmington as small beach town with exceptional food, lots of coffee shops, and fun, vibrant summer activities, a closer look reveals a thriving innovation economy. You’ll find startups emerging across industries including software, healthtech, bluetech, and fintech. At the core of this entrepreneurial ecosystem is the Wilmington Small Business Coalition, with small business advocates and entrepreneur support organizations (ESOs) dedicated to helping founders grow, thrive, and succeed. “No Wrong Door” Established in 2016, the Coalition was designed to make it easier for individuals and small businesses to access resources most suited to their particular needs. The Coalition is designed to have a “no wrong door” entryway into the regional startup ecosystem. Whether you are exploring a new idea sketched on the back of a napkin or leading a more established, growth-stage company, Coalition members can help connect you with the programs, funding opportunities, mentors, and resources best suited to your needs. No matter where you are in your entrepreneurial journey, any Coalition organization can help point you in the right direction. Coalition Members and Leadership Coalition members include the UNCW Center for Innovation and Entrepreneurship (UNCW CIE), AARP, Brunswick Community College Small Business Center, Cape Fear Community College Small Business Center, Cape Fear Region SCORE, Genesis Block Foundation, Network for Entrepreneurs in Wilmington (NEW), Small Business & Technology Development Center (SBTDC), Greater Wilmington Chamber of Commerce, YWCA Living the Dream Center for Entrepreneurship, Carolina Community Impact Fund (CCI Fund), Partner Community Capital, 717mkt Office Collaborative, NC Biotech, and Institute NC. In May 2026, the Coalition held its leadership elections, resulting in the selection of a new executive team. The following officers were elected to serve two-year terms: Chair: Lydia Thomas, UNCW CIE Vice Chair: Diane Lantz, CCI Fund Secretary: Aariene Hansley, Genesis Block Foundation Treasurer: Gloria Monroe, SBTDC Vision for the Wilmington Small Business Coalition In 2026, the Wilmington Small Business Coalition continues its work as a collaborative network of organizations. By connecting programs, expertise, and services across partner organizations, entrepreneurs can more easily find the right support at the right time. Rather than operating in silos, the Coalition aims to function as a unified, cohesive system of support for small businesses and entrepreneurs, ensuring that resources and expertise across partner organizations are visible and accessible. Through stronger collaboration and shared pathways, entrepreneurs can move more seamlessly from idea to startup to growth. Looking to dive into the Wilmington entrepreneurial ecosystem? Connect with any of the Coalition partners to get started! Connect with CIE To learn more about CIE and our services, programs, and events, join the CIE newsletter. You can also follow us on social media: Instagram, Facebook, LinkedIn, TikTok, or YouTube. CIE’s website is uncw.edu/cie. Heather McWhorter is the director of the UNCW Center for Innovation and Entrepreneurship (CIE). CIE supports innovation-forward start-ups and helps to build a vibrant innovation economy for all in southeast NC.
America at 250: Innovations That Transformed Business
Wharton faculty explore the American business innovations that transformed industries, reshaped markets, and changed the way the world works.
My MAHA Monday at the Great American State Fair | WSJ Politics Newsletter for June 30
Plus, the Supreme Court tells President Trump he can’t fire Lisa Cook, and why Jamie Dimon wants to finance missile makers
El Boletín newsletter: An earthquake shakes Venezuela’s political reset
Our correspondent in Caracas reports on how disaster is testing an already fragile country
The Taste Advantage: Inside The Vogue Business x Sparks Cannes Lions Breakfast
Vogue Business and Sparks convened a group of CMOs and other luxury leaders during Cannes Lions to discuss the future of meaningful connection.
What to Watch in Colorado Primary Elections: Will Left-Wing Energy Keep Rising?
Primaries on Tuesday will be the latest test of Democrats’ anti-establishment mood.
This Compact, Emission-Free Gas Turbine Is Rocket Science
This week’s Current Climate newsletter also looks at America lagging in EVs and charging infrastructure, and Sunrun’s transformation into a company
The knockout rounds of the World Cup are here
The Yodel newsletter: Get caught up on this morning's news
How AI is changing and challenging healthcare access
More people are consulting bots in place of physicians and therapists
How AI changing and challenging healthcare access
More people are consulting bots in place of physicians and therapists
We almost had a smartphone in the 90s. Why did it fail?
In the early 90’s, a company called General Magic began working on a portable device that would allow people to check email, make phone calls, even play games. It was basically a smartphone. But it never caught on.On today’s show, a theory about why this device failed. General Magic had generous investors, world-class talent and creative freedom. But is it possible what they needed was constraints?Support:Planet Money+Read: Our book: Planet Money: A Guide to the Economic Forces That Shape Your Life Our weekly longform Planet Money newsletterOur weekly Indicator round-up newsletterFollow: InstagramTikTokYouTubeFacebookThis episode was hosted by Erika Beras and Emma Peaslee. It was produced by Emma Peaslee with help from Sam Yellowhorse Kesler and James Sneed. It was edited by Marianne McCune and fact-checked by Charlotte Isidore. It was engineered by Jimmy Keeley with help from Cena Loffredo. Alex Goldmark is Planet Money’s executive producer.
Tackling the Politics of the World Cup
The soccer tournament has brought a flood of political story lines.
NC Democrats demand lower utility costs + budget talks drag on as deadline nears
Read our Under the Dome newsletter and listen to our Under the Dome podcast to stay up to date on #ncpol.
Politics Chat, June 25, 2026
A newsletter about the history behind today's politics.
🇺🇸 Y! Sports AM: Why not U.S.?
The USMNT, who play their final group stage match tonight, have given fans reason to believe in their status as contenders.
After New York’s Primary Elections, Democrats Face Five Big Questions
The anti-establishment left surged. How shaken are party leaders?
🏀 Y! Sports AM: Draft night
The Wizards took AJ Dybantsa at the top of an extremely loaded NBA Draft.
⚽️ Y! Sports AM: Messi vs. Mbappé
Lionel Messi broke the all-time World Cup goals record on Monday, but Kylian Mbappé isn’t far behind.
What I Saw at the Lincoln Memorial Reflecting Pool Monday Afternoon | WSJ Politics Newsletter for June 23
Plus, how President Trump’s war aims shifted, and ABC launches ads attacking the FCC.
Will New York Swing Further to the Left? Here’s a Preview of Tuesday’s Primaries.
The city’s high-drama, high-spending primaries will offer clues of progressive momentum and Mayor Zohran Mamdani’s influence.
In Washington and Around the World, Alliances Are Rapidly Fraying | WSJ Politics Newsletter for June 22
Plus, more pool problems for Trump, and Jay Clayton remains in limbo over the post of director of national intelligence
John Ternus set to re-establish importance of Apple's design team when he takes over as CEO: report
Bloomberg’s Mark Gurman today posted the latest edition of his Power On newsletter, recapping the last ten years of Apple’s...
Apple to Release These 20 New Products Across Rest of 2026 and 2027
Apple's annual WWDC developers conference is in the rearview mirror, but there is still a lot to look forward to over the next year and beyond. In his Power On newsletter today, Bloomberg's Mark Gurman listed around 20 products that he expects Apple to release across the remainder of 2026 and 2027.
The new kings of media are in your inbox
A new class of independent creators is building sustainable media businesses — one newsletter at a time.
The definitive ranking of every Pixar movie (including 'Toy Story 5')
Love movies? Live for TV? USA TODAY's Watch Party newsletter has all the best recommendations, delivered right to your inbox. Sign up now and be one of the cool kids.
Politics Chat, June 18, 2026
A newsletter about the history behind today's politics.
The Shifting Politics of Climate Change
A new poll suggests Republicans may be more movable on climate change than previously thought, plus more climate news.
You're probably using too many skin care products. Here are the 3 essentials
We asked half a dozen skin care experts: Which products do you really need to keep your skin healthy and attractive? Here's what they said.
French Twist: Trump Upends GOP Plans | WSJ Politics Newsletter for June 18
Plus, Kevin Warsh makes his debut as Fed chairman and Trump offers encouragement to Anthropic over access to its powerful AI models
Which WAGs Will Win the Summer of Sport?
As NBA finals celebrations kick on and the World Cup gets underway, Vogue Business breaks down the wives and girlfriends brands should be watching in the stands.
Politics Chat, June 16, 2026
A newsletter about the history behind today's politics.
Opinion | The Deck Is Stacked Against Healthy Eating
We need the will to push back against corporate interests.
Is gambling the reason we have pro sports?
To hear author David Bockino tell it, gambling has always been a key ingredient of pro sports in the U.S.—it’s as American as apple pie. Bockino is the author of the new book Over/Under: An Unexpected History of Sports Betting. So what gave rise to this new wave of sports gambling? And what are we risking placing so many bets on games? Fact checking by Sierra Juarez. Your Next Listen — Prediction markets are threatening national security. Who’s gonna fix it? Connect with The Indicator — Sign up for The Indicator’s brand new newsletter — Buy the Planet Money book — Find our socials, YouTube and more! — For sponsor-free episodes, subscribe to NPR+
Inside the White House’s Newest AI Clash With Anthropic | WSJ Politics Newsletter for June 16
Plus, President Trump spent his 80th birthday finalizing the Iran agreement as he watched the UFC contest
Thanks For Making Me 12th Highest on Substack’s List Of “Rising” Business- and Economics-Related Newsletters
A big thank you to those of you who upgraded to paid subscriptions to read my two most recent paid memos: https://richardkatz.substack.com/publish/posts/detail/201675746?referrer=%2Fpublish%2Fposts%2Fpublished and https://richardkatz.substack.com/publish/posts/detail/201774434?referrer=%2Fpublish%2Fposts%2Fpublished As a result, total paid subs rose by 5.6% over the past seven days. And that put me at 12th on Substack’s list of “rising” newsletters in business and economics. “Rising” means those with the biggest percentage increase in revenue from subs over a short period of time. Of course, as is often the case with the issues I discuss, this is a good-news/not-so-good-news story. The good news is a rush of new subs. The caveat is that it’s easier to get a big percentage increase when the base is relatively small. I have enough paid subs to be in the initial rank of Substack’s “best seller list,” but a way to go before enough of the 12,000 subs to Japan Economy Watch are paid subs. For most hybrid newsletters—a combination of free and paid posts—2-7% of the total subs are paid. 5% is my initial goal. If you gain insight from reading this blog, please join those who’ve already upgraded; help me reach 5%—and beyond. Subscribe
What This Iran Deal Might Mean for American Consumers | WSJ Politics Newsletter for June 15
Plus, Kevin Warsh wants the Fed to say less, and AI deepfakes muddle the midterms
Is SMIC N+3’s Metal Pitch Smaller than Intel 18A’s?
Almost four years ago, we published that SMIC had started shipping 7 nm (N+1) chips. Now, SMIC is shipping its third-generation 7 nm (N+3) process in Huawei’s Kirin 9030, with a minimum metal pitch of 32.5 nm, about 10% tighter than the 36 nm minimum metal pitch shipping in Intel’s latest Panther Lake CPUs on 18A. The headline is true, but incomplete cherry picked metric. N+3 reaches the density of TSMC N6 through aggressive DUV multi-patterning and design-technology co-optimization (DTCO), but it pays for that in complexity, efficiency and process control. We found this and more in our reverse engineering and teardown where we cover SMIC’s N3 process technology, Huawei’s packaging, memory, architecture, and more. SemiAnalysis has been building a state-of-the-art teardown lab in Oregon capable of analyzing the world’s most advanced and important chips over the last year and half. We have already generated revenue on advanced datacenter chip teardowns including our recent reverse engineering of a major TSMC customer’s COUPE CPO optical engine + EIC 3D stack. This is the first public report from the SemiAnalysis Teardown Engineering & Evaluation Lab, or STEEL for short. The lab is aggressively scaling up and out and we’re excited to announce it publicly. This is a bit of inconvenient timing for TechInsights as they are private equity owned and currently being sold while having enjoyed virtually no credible competition for decades. This has led to TechInsights underinvesting in CAPEX. SemiAnalysis exceeds TechInsights in revenue despite no venture or private equity ownership and being founded only 6 years ago. Because we have no external investors and are founder led, we move faster, build faster, and we can release client chip teardowns for free regularly, while focusing on datacenter for our major clients. Here’s the first public image from our lab, the HiSilicon Kirin 9030 Pro SoC: This report will detail our teardown of the Kirin 9030 and our findings on SMIC’s N+3 process, the most advanced in China. For comparison, we’ll show our teardown of the MediaTek Helio G99, made on TSMC N6. Through this comparison, we can look at the effect of export controls – SMIC N+3 and TSMC N6 are comparable nodes, but one is heavily export-controlled, the other free to use the West’s most advanced equipment. Here we see both China’s progress and constraints. SMIC N+3 reaches TSMC N6-class logic density, but it requires far more aggressive DUV multi-patterning, so it does not match N6 on process maturity or cost. The Kirin 9030 Pro performs similarly to three-year-old Android flagships, and trails far behind the current flagship SoCs from Apple, Qualcomm, MediaTek, and Samsung. The efficiency gap is even wider. Export controls have not stopped Huawei and SMIC from shipping advanced silicon, but they have forced a different path. Without EUV, SMIC is leaning harder on DUV multi-patterning, DTCO, and increasingly complex integration. The roadmap continues forward through tighter design rules and backside power, but each step adds cost and process risk. Huawei’s τ scaling and LogicFolding show another path: stacking active logic and recovering density through advanced packaging and system-technology co-optimization (STCO). To understand the Kirin 9030, we must first understand Huawei’s SoC history. HiSilicon is Huawei’s chip design arm, responsible for the Kirin smartphone SoCs, Kunpeng server CPUs, Ascend AI accelerators, and switch/router networking silicon. Before export controls, Huawei was TSMC’s largest customer – the only customer on TSMC’s first EUV node, N7+, and among the first on N5, alongside Apple. That ended in late 2020. Huawei switched to Qualcomm SoCs in its flagship smartphones, though export controls limited them to 4G-only variants. In late 2023, Huawei returned to in-house silicon with the Kirin 9000s, a successor to the Kirin 9000, fabricated on SMIC N+2 instead of TSMC N5. In the following years, they released the Kirin 9010 and 9020 on the same N+2 process. These chips used Huawei’s in-house TaiShan CPU cores and Maleoon GPU. We have not torn down a Kirin 9020 ourselves, so the predecessor die shot is from Kurnal. The die shots show how Huawei spent its silicon budget: which functional blocks are where, and how their areas compare to the predecessor. First, a quick guide to the major blocks on the die. The total die area is nearly identical, but the 9030 uses that area more aggressively. A denser process lets Huawei fit an extra middle CPU core, more GPU and NPU cores, and larger caches into the same footprint. In contrast, the Helio G99 is a much smaller, low-cost SoC, built for budget smartphones rather than a flagship device. While the Kirin 9030 is ~140 mm², the G99 is only ~29 mm², roughly one-fifth the area. The underlying TSMC process technology, however, is directly comparable as a baseline for analyzing SMIC’s. The Kirin 9030 is an evolutionary refresh, not a clean-sheet design. Its CPU, GPU and NPU cores carry over the 9020’s families, and the gains come from three levers: the SMIC N+2-to-N+3 process step, DTCO and floorplan work, and incremental microarchitecture. Area is where the first two show up, and the 9030 scales well here. Performance and efficiency are the harder test. Huawei’s design holds up better than its node would suggest, but the chip still trails, both because N+3 sits behind the leading-edge nodes and because its cores, while competent, remain a few generations behind the newest designs. The new prime core is an incremental update. The main changes are a 10% frequency increase from 2.5 GHz to 2.75 GHz and a doubling in the L2 cache from 1 MiB to 2 MiB. Despite the increased cache, the core size decreased by 7.6%. Excluding the private L2 cache, the core size decreased by 21%. This is a large reduction for an incremental node. Compared with the TaiShan New V120 core in the Kirin 9020, the Kirin 9030’s middle core is almost unchanged architecturally, yet each core shrinks by ~22%. Most of that comes from the move from N+2 to N+3, with layout likely accounting for the rest. Visually, the most noticeable change is the increase from 3 middle cores to 4. There is also a 20% increase in the shared L3 cache of the big cluster. This helps to improve multi-core performance without sacrificing much in terms of area. Even with each core shrinking, the big CPU cluster’s total area is essentially unchanged. The per-core savings went back into an additional middle core and larger caches. The tiny cores shrank less than the prime core (excluding its L2 cache) and less than the middle cores. This is likely because fixed overhead is a larger share on a small core. We cannot resolve any architectural changes from the die shot alone, but the per-clock and efficiency gains shown below point to more than pure process and layout scaling. The area reduction was offset by a doubling of the shared L2 cache from 2 MiB to 4 MiB, leaving the total tiny CPU cluster area slightly larger. Area is the easiest improvement to see from a die shot, but it is only one part of PPA (power, performance, area). For modern logic, power and performance matter just as much, and often more. Since Dennard scaling broke down in the mid-2000s, voltage and frequency have not scaled in step with transistor dimensions, so each node has had to fight harder for gains in performance and efficiency. The starkest comparison is not Kirin 9020 versus Kirin 9030 Pro. Apple’s efficiency cores run circles around Huawei’s prime core. Apple’s low-power core delivers 20% higher integer performance while drawing only 1 W, compared with 4.5 W for Huawei’s prime core. N+3 matches TSMC N6, but N6 is several generations old. Apple and Qualcomm build on N4 and N3P, which are denser and sit on a better voltage-frequency curve, giving them a larger transistor budget and more performance per watt. The 9030’s own cores did improve. The middle and tiny cores gained 17% and 14% in per-clock integer performance over the 9020, with floating-point flat on the middle core and up 11% on the tiny. The tiny core improves cleanly, with performance rising while power falls and efficiency increases by 45% in integer and 24% in floating point. The middle core is mixed: integer performance rises but power rises faster, cutting integer efficiency by 7%, while lower power lifts floating-point efficiency 16%. Per-clock gains at the same or lower frequency are microarchitectural, so the cores are tuned, not just shrunk. Both also failed to hold their rated maximum frequencies, pointing to thermal, power, or stability limits. Per clock, the middle core sits around Arm Cortex-A720 and the tiny core near the Cortex-A520; absolute performance trails because Huawei clocks them much lower. The prime core is roughly Cortex-X2 class per clock, a 2021 design. Apple’s 2020 M1 Firestorm core is still 35% higher per clock and 57% faster in absolute integer performance at a similar 4.5 W. The current leading edge is further ahead again: the Apple M5 P-core is 60% higher per clock and 2.7× faster, the Arm C1 Ultra 45% higher and 2× faster. Matching older high-end cores per clock is a genuine design achievement. What Huawei cannot match is the voltage-frequency curve and transistor budget of leading-edge nodes, which let Apple, Qualcomm and others spend more transistors in the same area on wider cores, larger caches and deeper buffers while running at lower voltage. Huawei’s LogicFolding roadmap is one answer, stacking active logic to recover density and shorten signal paths. We return to it later. The GPU compute units (CUs) changed more visibly than the CPU cores, moving to a more rectangular layout for both the arithmetic logic unit (ALU) clusters and the CU overall. Even with ray-tracing support added, a CU shrank ~28%. However, that shrink is offset by the increase from 4 to 6 CUs and the area outside the CUs grew 33%. Overall, the GPU cluster is larger by ~10%. The GPU is where Huawei makes its biggest gains. The Maleoon 935 is not competitive with current flagships, but it is a large step up from the 920 and reaches older-flagship territory. In 3DMark it is 70% faster in Wild Life Extreme (WLE) and 79% faster in Steel Nomad Light (SNL) than the 920; with 11% higher clocks and 50% more CUs, the ~67% theoretical uplift roughly matches WLE and is beaten by SNL. It edges ahead of the Snapdragon 8+ Gen 1 in WLE and SNL, and the Dimensity 9200 and Apple A16 in WLE, but stays far behind newer parts: the Snapdragon 8 Elite Gen 5 and Dimensity 9500 are ~2.4–2.6× faster in WLE and ~3.2× faster in SNL. The Maleoon 935 is Huawei’s first GPU with hardware-accelerated ray tracing; there it lands slightly ahead of the Exynos 2200, and on par with the Apple A16, with current flagships up to 3.7× faster. The Neural Processing Unit (NPU) saw the largest structural changes of any block, moving from a Lite and a Tiny core in the Kirin 9020 to a Lite and two Tiny cores in the Kirin 9030. Both core types also show significant layout changes. This is a reversal in Huawei’s NPU design. The Kirin 9000 5G, its last flagship chip on TSMC N5, used two Lite and one Tiny core. The series of SoCs on SMIC N+2 moved to one Lite and one Tiny core, likely for area savings. With the Kirin 9030, Huawei has shifted back toward a larger multi-core NPU cluster, but with the additional area going to a Tiny core rather than a Lite core. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Before diving into the process stack, the package and memory are worth separating from the SoC itself. The Pro variant of the Kirin 9030 carries 12 GB of Samsung DRAM, with two stacks of four dies each. The dies were identified as the K4L2E165YD, a 12 Gb LPDDR5X-9600 device fabricated on Samsung’s 1a node, the fourth generation of its 10 nm-class DRAM after 1x, 1y and 1z. 1a has shipped in volume since 2022, so this is current memory rather than older-node inventory. The 16 GB Pro Max variants we obtained were found with both CXMT and Samsung packages. The CXMT package is marked CXDD7JEDM, with two stacks of four dies, packaged in week 45 of 2025. The inferred die dimensions from X-ray computed tomography (CT) are consistent with a known density of ~0.3 Gib/mm² for the CXMT G4 process, roughly equivalent to other manufacturers’ 1z processes. The Kirin 9030 uses a typical integrated package-on-package (iPoP) stack: multiple DRAM dies in a memory package sit above an organic redistribution layer (RDL) interposer, which sits above the SoC and package substrate. The full package is then mounted to the printed circuit board (PCB) through ball-grid array (BGA) solder bumps. The memory package substrate is a thin bismaleimide-triazine (BT) laminate carrying the LPDDR5X stack. The organic RDL interposer over the SoC routes the PoP signals around the die and carries possible dummy thermal copper pillars. The package substrate, a thicker Ajinomoto Build-up Film (ABF) build-up over a BT core, fans the flip-chip bumps out to BGA pitch and embeds the power planes. The whole stack is organic. The only silicon is the SoC and the LPDDR5X dies; there is no silicon interposer. Keeping it all-organic brings the package’s coefficient of thermal expansion (CTE) close to the PCB’s, reducing board-level warpage, and avoids the cost of a silicon interposer the SoC’s bandwidth does not need. In an iPoP stack, the memory package connects to the organic RDL interposer through an array of solder bumps. Underfill fills the gap around those bumps, adding stiffness and protecting the joints from mechanical stress. The Pro and Pro Max variants differ here, which we cover behind the paywall. The die shot and architecture tell us how Huawei allocated its silicon budget. The process tells us what SMIC can manufacture. We use the Helio G99 as the process reference for TSMC N6. Both SMIC N+3 and TSMC N6 are evolutions of previous 7 nm-class nodes. We used targeted TEM cross-sections through logic and memory regions, imaged in both fin-cut and gate-cut directions. Each cross-section caption gives its horizontal field width (HFW), the real width of the imaged area. We start at the transistor fins, then move up through standard cells, local interconnect, and SRAM. SMIC has not overtaken Intel or TSMC. It uses aggressive DUV scaling and DTCO to reach N6-class density, but that density doesn’t translate into comparable performance and efficiency, for two reasons: the node gap to leading-edge nodes, and Huawei’s core designs. Fin Profile One of the most important knobs in a FinFET process is the fin profile: the shape of an individual fin and the channel where current passes from source to drain. The ideal fin is tall, narrow, and nearly vertical. A taller fin increases effective channel width, while a narrower fin improves electrostatic control by thinning the body the gate must control. Push either too far, and the process pays for it: weaker drive current, fragile fins, taper, footing and line-edge variation that hit yield and device variability. The Intel 22 nm, 14 nm, and 10 nm fin cross-sections show how FinFET nodes have improved over time. 22 nm fins were a first-generation structure, relatively short, wide and strongly tapered. The shape limits current density and reduces gate control uniformity across the height of the fin. At 14 nm and 10 nm, Intel pushed the fins taller and narrower while also making the sidewalls more vertical. Rather than shrinking the device, these changes increase the effective channel width per fin and improve electrostatic control. The trade-off is that taller fins at tighter pitches are much more difficult to manufacture. Now, let’s compare the Helio G99 on TSMC N6 with the Kirin 9030 on SMIC N+3. Both processes are in the same class, with fin pitch of 30-32 nm on N+3 and 34 nm in our N6 cross-section. The pitch for N6 is especially interesting as N7’s HD library is generally listed with a 33 nm fin pitch, and N6 did not shrink pitches directly. Its density gains came from DTCO instead of tighter pitches. The 34 nm pitch was stable across our sampled region and serves more as a comparison against the SMIC N+3 we have not investigated further. Pinning down N+3’s fin patterning scheme takes more than one core unit. The CPU cores show a dense ~32 nm pitch, with the pitch between N-P fin pairs alternating between 78 and 88 nm. Logic alone may be consistent with dual-pitch mandrels of 120 and 110 nm, but this is a complex and unusual approach. Combining the pitch from the the 8T SRAM, which has more complex repeat unit, with the CPU core sequence allows us to reverse engineer the patterning steps with more confidence. As both the logic and SRAM should share the same base grid, a single CD mandrel lithography pattern with 128 nm pitch undergoing SAQP produces a die-wide ~32 nm grid (128 nm/4), which supports the pitch sequencing seen in both logic and SRAM cells. In the sampled cross-sections, N+3 shows a taller, narrower, higher-aspect-ratio fin than N6. The measured fin aspect ratio is ~9.5:1 on N+3 versus 7.8:1 on N6. N+3 also shows less top rounding, with an estimated radius of ~2 nm, compared with 2.8 nm on N6. Even though the fin widths differ, the ratio of top rounding to fin width tells the same story, with N+3 at 0.37 and N6 at 0.44. In a geometric sense, lower is better; a perfectly rectangular fin would have no top-rounding penalty. These are single-digit-nanometer features measured from a handful of cuts, so treat the absolute numbers as approximate. The important result is the relative gap: N+3’s fins are consistently taller, narrower and less rounded than N6’s. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Standard Cell A standard cell is the basic building block of chip layout: a fixed-height row pairing one NMOS and one PMOS transistor that share a gate, tiled in a grid to build logic blocks. The key dimensions are contacted gate pitch (CGP), cell height (CH), fin count, and the lower-metal routing grid. To measure density, we use the Bohr metric: a weighted average of NAND2 gate area (60%) and scan flip-flop area (40%). This represents a realistic mix of combinational and sequential logic. This metric has its limitations, especially for complex cell layouts like TSMC’s FinFLEX, which alternates cells with different fin counts. Even so, it is the best metric for a pure process-level comparison. Another important measurement is the fin pitch; it refers to the distance between two fins of the same transistor. In a FinFET process, multiple fins are used in each transistor to increase the drive current and thus performance. TSMC N6 ships both a high-density (HD) library with 2 PMOS and 2 NMOS fins per cell, and a high-performance (HP) library with 3 of each. More fins under the shared gate mean more effective channel width. HP cells switch harder at the cost of area. Designers mix the two on a die, primarily spending HP cells on timing-critical paths, and matching their PPA targets. In the Cortex-A55 core of the Helio G99, we found a cell height of 240 nm for the HD cell. MediaTek has used HD cells in the G99 to minimize die size and thus cost. As an SoC for budget smartphones at ~$100, this is essential. By contrast, we found only one library in the Kirin 9030, with 2 NMOS and 2 PMOS fins. This suggests a narrower library strategy than TSMC N6, where both HD and HP libraries are widely used. This likely reflects the smaller customer base and the more constrained domestic design and electronic design automation (EDA) ecosystem. In all three CPU cores of the Kirin 9030, we found cell heights of 228 nm, 5% smaller than on N6. This is also a reduction of 9.5% over SMIC N+2’s cell height of 252 nm. SMIC N+3 and TSMC N6’s HD library both feature a CGP of 57 nm. For SMIC, this is a 9.5% shrink over N+2. In the past, CGP and cell height alone may have been enough to compare transistor density. Now, however, we must consider scaling boosters and DTCO as well. SMIC’s density gain does not come from EUV. It comes from using every available DTCO booster aggressively. First is fin depopulation: reducing the number of NMOS and PMOS fins in each cell. The first FinFET nodes started with 3 or 4 fins for each transistor. SMIC N+3 and TSMC N6 HD both use only 2 fins per transistor, trading drive strength for density. Next is contact over active gate (COAG). By landing the gate contact directly over the active gate, instead of out over the isolation region, the cell height drops. N+3 integrates COAG while N6 does not. Our N+3 gate-cut cross-sections indicate COAG, with the gate contact sitting over the active region, while N6 shows an off-gate contact. Last is single diffusion break (SDB). Diffusion breaks are inserted between cells in the same row to provide electrical isolation, but they also introduce local layout effects (LLE), layout-dependent shifts in electrical characteristics. In the past, a double diffusion break was used, consuming the space of two CGPs. SMIC N+3 and TSMC N6 instead use SDB, saving area but increasing LLE sensitivity. This must be controlled at the process level and accurately modeled in the process design kit (PDK) so that EDA tools can account for it. Overall, SMIC N+3 has a transistor density of 113.4 MTr/mm², slightly above TSMC N6 at 107.7 MTr/mm². Even without EUV, SMIC has achieved density beyond TSMC’s mature N6 node which utilizes EUV. Metal Stack The smallest critical dimension in the teardown is M0; SMIC N+3 uses a 32.5 nm local metal pitch. That is smaller than the 36 nm M0 pitch on Intel 18A in Panther Lake. However, this does not mean that SMIC has a better process than Intel 18A or TSMC N3P. M0 is a local intra-cell routing layer. Its usefulness depends on the full interconnect stack: M1 and M2 pitch, track count, via and line resistance, design rules, mask count, overlay control, and routing flexibility. The 32.5 nm M0 is consistent with self-aligned quadruple patterning (SAQP), whose four-population line-width loading we read coarsely as alternating widths of 21.5 to 24 nm; M1 and M2, at 38 and 40 nm, are consistent with self-aligned double patterning (SADP), a single A/B split. On TSMC N6, M0, M2, and M3 sit at a relaxed ~40 nm and are consistent with SADP-class double patterning, with no need for quadruple patterning. That said, we measure M2 for example at ~43 nm, likely inflated by sparse routing. We do not assign any specific layer to EUV from our cross-sections; the distinction we can draw is double versus quadruple patterning, not lithography wavelength. Transistor-level density in the front-end-of-line (FEOL) sets an upper bound, but the design is ultimately limited by what the interconnect stack can route. The lowest metals are the most important for standard-cell density, but the semi-global and global layers determine how usable that density is at the block and chip level. Two axes are commonly used for chip cross-sections: the fin-cut and the gate-cut. The micrograph above is a fin-cut and shows metals 0 through 3. This axis lets us see the even-numbered metals, with M0 right above the fins. There are two kinds of M0 lines. The first are the power rails; these are wide wires for the VDD and VSS running horizontally at the top and bottom edges of each standard cell. The wide wires measure 55 nm across, more than double the other M0 lines. Their width minimizes resistance and reduces IR drop. The second kind are intra-cell wires, short segments within the cell that connect terminals to M1. These have alternating widths between 21.5 and 24 nm. The M0 pitch is 32.5 nm, a 19% reduction versus N+2 and N6. At this pitch, DUV patterning requires more aggressive multi-patterning, increasing mask count, overlay sensitivity, process complexity and cost. M0 is below what a single DUV-defined spacer (SADP) can resolve, so SMIC cascades a second spacer step (SAQP). The cross-section reflects the cost: the M0 trenches are visibly more re-entrant (narrower at the bottom than the top) than M1 or M2 on the same chip and carry a bright barrier-rich foot where the trench meets the etch-stop layer. That shape is partly the intended damascene profile, as a slightly narrow bottom helps void-free copper fill, but its magnitude at M0 is driven by the tight pitch and the higher trench aspect ratio. Intel 18A supports an M0 pitch of 32 nm, although Panther Lake has only shipped with a looser 36 nm pitch. This is due to Intel’s heavy usage of HP libraries. Among leading-edge nodes, 18A has the loosest M0 pitches due to PowerVia. With power routing moving to the backside, congestion is reduced, and the entire front-side metal stack can be used for signal routing. M2 is the first true inter-cell routing layer. It runs horizontally like M0 but spans across multiple cells to carry block-level signals. The M2 pitch sets the cell’s track height – the number of M2 tracks that fit between the VDD and VSS rails, defining what the library calls a 6-track or 7.5-track cell. This layer is the most important, limiting the routing of entire blocks. SMIC N+3 features a 5.7-track cell. The M2 pitch is 40 nm, a 5% decrease over N+2 and the same as N6. This shrink keeps the pitch at the edge of what is possible with double patterning. Future nodes will need to increase the number of masks for M2 as reducing the number of tracks is much harder due to the limitations in routing. The micrograph above is in the perpendicular direction, the gate-cut, and shows metals 0 through 4. This allows us to see and measure the odd-numbered vertical metal layers. The M1 pitch is 38 nm, 9.5% less than N+2 and 33% less than N6. The M1-to-gate ratio matters because it sets local routing flexibility. N+2 and N+3 use a 3:2 ratio, while N6 uses a 1:1 ratio, explaining the huge differences in M1 pitch. The more M1 lines there are compared with the gates, the more flexibility there is for power and signal crossing within the cell. Routing flexibility enables more complex and better cells. Clean fractional ratios are also preferred as a grid is periodic and improves layouts. The 3:2 ratio gives SMIC more local routing flexibility than a strict 1:1 grid, but it also complicates layout and patterning. This is a DTCO choice, with SMIC increasing process complexity to recover density and routability without EUV. This 3:2 ratio is not very popular in the leading-edge nodes. TSMC has only used it on N7+, the N5 family, and the short-lived N3(B). They have switched back to a 1:1 ratio for N3E. Intel has only used it on the 10 nm/Intel 7 family, with Intel 4, 3 and 18A all using a 1:1 ratio. Samsung is the only one still using a 3:2 ratio at the leading edge, using it in the SF4 and SF3 families. It remains to be seen if SMIC will remain at a 3:2 ratio or move to a 1:1 ratio with its future nodes. The industry is still actively exploring these local-routing ratios. At VLSI 2026, imec will be presenting work on even higher ratios, including a 2:1 scheme that can reduce area by up to 14%. We will be covering the conference in a future newsletter article. Subscribe We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. The final local interconnect layer for N+3 is M3, with a pitch of 44 nm. The M3 pitch is the same as on N+2 and 10% larger than on N6. The semi-global layers carry the majority of block-level signal routing. They have a coarser pitch than the lower local layers. On leading-edge nodes, they are designed to sit at the limit of DUV single patterning. M4 through M11 pitches were found divided between 80–82 nm (M4–M6), 128 nm (M7–M10), and 148 nm (M11). Given limited sampling, it is possible these are divided further in dense routing areas. At the top are two giant metal layers, M12 and M13. These have kept the same pitches as N+2 at 1920 nm and 4600 nm respectively. While the lower layers’ pitches are generally fixed by the process and library, the upper layers vary much more in pitch and count, depending on the design. Even two smartphone SoCs on the same process can have wildly different metal stacks. The Helio G99 carries fewer routing layers, reaching coarse metal pitches of 850 nm by M9, while the larger and higher-performance Kirin 9030 keeps fine pitches until M11. SRAM At the leading edge, SRAM is much more difficult to scale than logic. TSMC’s latest nodes have seen little to no bitcell scaling, while logic still has more DTCO levers to pull. While looking for other logic libraries in the GPU compute units, we stumbled upon the SRAM. The most common type of SRAM has 6 transistors (6T), but this cell had 8 transistors (8T) instead. 8T SRAM adds two transistors to form a dedicated read port. Unlike a 6T cell, where reading disturbs the storage, the decoupled read port removes read-disturb, improving read stability and letting the cell be pushed harder for performance. At first glance, the cut looked like an unusual logic library, with each cell row having 3 fins of one polarity and 5 fins of another. The rows also alternated in orientation. Energy-dispersive X-ray spectroscopy (EDS) resolved our confusion. The cut had not landed on the GPU logic, but on the SRAM macro beside it. The unusual fin pattern was due to the SRAM library. We return to EDS in the process flow analysis behind the paywall. SRAM libraries are not like traditional logic libraries. Due to the unequal number of PMOS and NMOS transistors, they require specialized rules and layout libraries. They do not need the flexibility of logic libraries, so they are hyper-optimized for one purpose: dense, reliable memory. The SRAM cell we found is a 1:2:2-2:2 cell. This means there is 1 fin per pull-up (PU) PMOS transistor, and 2 fins per pull-down (PD) and pass-gate (PG) NMOS transistor. These 2 PU, 2 PD and 2 PG transistors would usually form a single 6T high-current cell (HCC). An 8T HCC adds a read-pull-down (RPD) and a read-pass-gate (RPG) NMOS transistor, each with two fins. We measured a cell height of 406 nm, which brings the bitcell size to 0.0463 µm². That is a theoretical peak density of 21.6 Mib/mm². We estimate that a 6T HCC would have a cell height of 292 nm and a size of 0.0337 µm². This is ~12% larger than a 6T HCC on Intel 3 and 4. We also estimate the 6T high-density cell (HDC) to have a cell height of 228 nm and a size of 0.0260 µm². This is coincidentally the same as the logic standard-cell height measured earlier. The estimate puts the cell near Samsung 7LPP/5LPP and slightly below TSMC N7/N6. That is a theoretical peak density of 38.5 Mib/mm². 6T HDC is arguably the most important cell as it is used for the largest caches in a chip, the L3 caches and system-level cache (SLC). Both the Kirin 9020 and 9030 have split the SLC into 4 banks to raise total SLC bandwidth. In the Kirin 9030, the SLC increased from 2 MiB to 3 MiB per bank. Correspondingly, the number of arrays within the bank also increased by 50%, from 16 to 24. Each array can store 128 KiB and forms an orderly pattern on the die shot. From the Kirin 9020 to the Kirin 9030, the area of a 128 KiB SLC array decreased from 0.0477 mm² to 0.0392 mm², an 18% shrink. The achieved density is 25.5 Mib/mm², 66% of the theoretical maximum. While the SLC was quite similar across both chips, the L3 has seen some major changes, particularly in terms of its layout. The total capacity also went up from 10 MiB to 12 MiB. Much like the SLC, the L3 is also split into 4 banks. In the Kirin 9020, an L3 bank consisted of 16× 128 KiB arrays and 16× 32 KiB arrays. However, an L3 bank in the Kirin 9030 instead consists of 48× 64 KiB arrays. In the Kirin 9020 L3, a 128 KiB array was 0.0513 mm² and a 32 KiB array was 0.0154 mm². The size of the 128 KiB array is different on the L3 and SLC as the assist circuitry for the two arrays differs depending on their purpose. In the Kirin 9030 L3, a 64 KiB array is 0.0210 mm². Although not a like-for-like comparison, normalized for capacity, it is 18% smaller than the 9020’s 128 KiB L3 array and 31% smaller than its 32 KiB L3 array. The achieved density is slightly lower than the SLC, at 23.8 Mib/mm², 62% of the theoretical maximum. Unlike the L3 and SLC, the prime cores’ private L2 cache uses a 2-bank design. As the prime cores’ L2 is latency-critical, it likely uses 6T HCC instead of 6T HDC. The 9020 has 16 arrays in each bank while the 9030 has 32. Each array has a capacity of 32 KiB. A 32 KiB array in the L2 shrank from 0.0171 mm² to 0.0142 mm², ~17% smaller. The density is 17.6 Mib/mm², ~59% of the theoretical maximum for 6T HCC. SRAM scaled well from N+2 to N+3, shrinking by ~19%, close to the theoretical logic shrink. The caveat is that N+2’s bitcells were unusually large, bigger than comparable 7 nm-class nodes, so part of the gain is catch-up rather than true scaling. With the insights from STEEL’s teardowns, we will be doing a deep dive into SRAM in a future newsletter article. Subscribe Everything above came out of a single STEEL teardown: die annotation, block-level area analysis and TEM cross-sections through logic and SRAM. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Future Roadmap The same cross-sections that pin down N+3 also show where SMIC can go next. Although N+3 is already close to the practical limits of DUV multi-patterning in several layers, SMIC still has a few scaling levers left. A theoretical N+4 would likely start with cell height. N+3 uses 5 M0 tracks between its power rails. Moving to 4 M0 tracks, as on SMIC N+2 and TSMC N6, could reduce cell height by roughly 15%. The routing grid is only one side of the shrink; the front end also must fit into the smaller cell. One possible FEOL lever is reducing the p-to-n isolation spacing from two diffusion grid units to one. Intel used this scaling booster on Intel 4, and TSMC did so on its N3 family. This path trades layout flexibility for density. Fewer M0 tracks reduce local routing resources, while tighter p-to-n spacing raises integration and design-rule difficulty. M2 is also constrained by the cell height shrink. For SMIC to maintain a ~5.7-track cell, M2 would need to move toward ~35 nm. That would move another layer into SAQP territory. SMIC could also reduce the CGP from 57 nm to 54 nm. Intel reached a similar CGP on Intel 10 nm/Intel 7 without EUV. The local interconnect is also tougher. If SMIC keeps the 3:2 M1-to-gate ratio, M1 would need to shrink to 36 nm and would likely require SAQP as well. If SMIC moves to a 1:1 ratio, M1 could relax to 54 nm, but it would give up routing flexibility. Under this theoretical path, we estimate that SMIC N+4 could reach a cell height of 198 nm and a CGP of 54 nm, implying a Bohr density of 137.8 MTr/mm², on par with TSMC N5 or Samsung SF4. However, the difficulty is cumulative. Each step is individually plausible, but together they make N+4 harder than the transition from N+2 to N+3. It will likely take longer, cost more, and carry less process margin. A theoretical N+5 would require a larger integration shift. One possible path is backside contacts (BSCon), moving power routing and source/drain contacts to the backside, which would reduce front-side routing pressure and enable another reduction in cell height. The front-side metal pitches could relax to reduce the process complexity. M0 would likely relax slightly to ~34 nm, and M2 and M4 pitches could relax further. CGP is unlikely to shrink much further. Even with EUV, 48 nm has been the practical limit for yield and process control. This approach would allow N+5’s cell height to fall to 170 nm and its CGP to 53 nm. This implies a Bohr density of 163.6 MTr/mm², on par with Intel 18A’s HP library. However, this would not make N+5 cost-competitive with the leading edge. It would reach a similar density through a much more expensive route. The integration difficulty rises sharply, with new process flows for backside alignment, wafer thinning, contact reveal, and backside metallization. Past this point, standard density and interconnect scaling become increasingly unattractive. That is where Huawei’s roadmap stops looking like a normal foundry roadmap and starts looking like a packaging roadmap. At ISCAS 2026, Huawei unveiled its tau (τ) scaling law, reframing process scaling in the time domain. τ is the time cost of data movement and processing: switching delays in transistors, RC signal propagation delays in circuits, compute, memory, and networking latency. Outside Huawei’s terminology, this is called system-technology co-optimization. This is Huawei’s answer to its lack of EUV lithography. Without EUV, planar density cannot keep pace with TSMC, Intel, or Samsung. If transistor density cannot shrink further, Huawei’s alternative is to shorten wires, reduce buffering, and stack logic vertically. “LogicFolding”, Huawei’s implementation of this new scaling idea, is, in practice, an aggressive 3D stacking approach. AMD V-Cache places SRAM above or below a CPU die. AMD’s MI350X places active interposer dies (AIDs) underneath accelerator and compute dies (XCDs), with the AIDs handling cache, IO interfaces, the network-on-chip (NoC) and embedded metal-insulator-metal (MIM) capacitors. With LogicFolding, parts of the same logic block are split across multiple active dies bonded face-to-face at ultra-fine pitch. This allows Huawei to shorten some critical paths and reduce buffer overhead, not merely add cache capacity or offload the IO and interconnect. Shortening wires is where the higher clocks come from. A large share of a modern core’s delay and energy budget goes into driving long interconnects and the repeater buffers along them. LogicFolding distributes a block’s critical-path gates across multiple stacked tiers bonded at a very fine pitch, so the bond interface behaves like an additional metal layer and the longest paths get shorter. That is how Huawei expects to recover frequency and efficiency it cannot get from the process alone. Huawei’s roadmap shows its intent. Prime core frequency is targeted to rise from 2.75 GHz in the Kirin 9030 to roughly 5 GHz by 2031, far beyond what planar scaling alone could deliver. Prime cores with 3.1 and 3.39 GHz clocks are being tested in its labs, although their power consumption is unknown. Beyond that, chips are in the design, simulation or pathfinding phase, meaning the frequencies are targets. However, the direction matters more: LogicFolding also helps with performance, not just density. The catch is that Huawei’s density claim is not directly comparable to foundry densities. A stacked design can report more transistors per package footprint by adding active layers, even if each patterned die remains well behind TSMC or Intel in front-end density. This is how Huawei can claim to reach foundry 14A-equivalent density by 2031. This is not a like-for-like foundry comparison, with Huawei using stacked logic and measuring density per package footprint. On a normalized Bohr-density basis, SMIC N+3 is ~114 MTr/mm², 38% less than Intel 18A’s HD library. Huawei’s 3D roadmap closes the gap by stacking active logic, reaching 215 MTr/mm² by 2030. In 2031, the roadmap density jumps to 295 MTr/mm², implying either a third active layer, partial EUV insertion or aggressive planar DUV scaling. Huawei’s methodology makes other foundries look much denser as well. Applying it to AMD’s MI450X with an N2 top die on an N3P base die yields a theoretical density of 460.2 MTr/mm² in 2026, compared with Huawei’s 295 MTr/mm² in 2031. This Kirin 9030 does not use LogicFolding, remaining in a conventional mobile SoC package. Instead, it forms the baseline for how far Huawei and SMIC can push planar scaling. Future teardowns of Kirin and Ascend chips will show both planar logic density and Huawei’s hybrid bonding solutions. Export controls changed China’s optimization problem rather than ending it. EUV restrictions raised the cost and complexity of leading-edge manufacturing without freezing it. SMIC reaches N6-class logic density through DUV immersion, SAQP and DTCO, while Huawei shifts more of the burden onto architecture, packaging and system-level integration. Future nodes will be tougher. N+3 still had room to tighten local metals and reduce cell height and CGP. Further scaling without EUV leaves fewer levers. More aggressive multi-patterning adds masks and overlay error. SMIC can keep pushing DUV, but each step will get more expensive and less forgiving. The design side is just as critical. Huawei had domestic EDA tools and flows before the Kirin 9030, with the Kirin 9000s, 9010 and 9020 making that clear. Huawei was able to ship multiple consumer SoCs on SMIC N+2 and N+3 while cut off from the Western EDA stack. US export controls restricted EDA tools for advanced chips in 2022 but did not target tools for more mature chips. In 2025, the US government briefly placed much broader restrictions on EDA software from Synopsys, Cadence, and others, before lifting them less than two months later as part of a trade deal tied to rare earths. Huawei has been unable to access those tools because it remains on a US trade blacklist. That forced Huawei, SMIC and Chinese academic institutions to build their own tools and flows. Researchers at Peking University recently announced a prototype EDA tool for Huawei’s LogicFolding architecture, which requires a new flow to handle the multilayer layout and floorplan. This is not the same as replacing the full Synopsys or Cadence stack, but it shows where domestic EDA is headed: toward tighter co-optimization between architecture, process and packaging. These advances are also diffusing into the Chinese ecosystem. SMIC is licensing its N+2 and N+3 processes to HLMC/Hua Hong at the government’s direction rather than by choice. If the same process learning feeds into Ascend accelerators for AI training and inference, the choke point shifts from one named fab to an ecosystem. Alibaba’s T-Head silicon arm and Cambricon, a Chinese AI chip designer that is expected to supply ByteDance, could also be major beneficiaries. Sanctions aimed at SMIC alone become less effective once the manufacturing knowledge has spread to other fabs and design houses. China is not closing the gap with Intel, Samsung and TSMC. The teardown shows the opposite in several places: no EUV, no backside power, higher process complexity, and visible trade-offs. But China is still advancing. If domestic chips become good enough for phones, inference, networking and security-sensitive workloads, they can matter strategically without matching TSMC at the leading edge. Behind the paywall, we show what else STEEL can do, with material and process flow analysis of SMIC N+3, and analysis of the Kirin 9030 package. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline, access the full Kirin 9030 and SMIC N+3 analysis or to commission a custom teardown, contact sales@semianalysis.com.
What Genres and Streamers Won 2025? And Who Lost? Plus Six Strategy Thoughts
(Welcome to the Entertainment Strategy Guy, a newsletter on the entertainment industry and business strategy. I write a weekly Streaming Ratings Report and a bi-weekly strategy column, along with occasional deep dives into other topics, like today’s article. Please subscribe.) Okay, time for the tenth and final article in my ten-part series recapping 2025. As I wrote two articles ago, my barometer for whether these articles are worth writing/publishing is whether they yield strategic insights, and once again, every subsection in this article has a strategic takeaway (or two). Honestly, these are the most important takeaways, since I step back and look holistically at the streaming wars in 2025. After I declare which streamers won and lost the year and which genres won and lost the year, I have six bonus thoughts. If you’d like to review the whole series... You can find the film flops here and here. You can find the TV shows flops here and here. You can find the top films here. You can find the top TV shows here, here and here. Then I declared my winners and losers in various categories here. You can find my 2024 recaps here. You can find the 2023 recaps here and here. And my 2022, 2021 and 2020 are all stored here. Yeah, it’s halfway through the year, and I’m just finishing this series up now. This year, I tried to space things out to not clog up my writing calendar, plus I had to wait for Fallout to (finally) drop off the charts. Well, that ended up pushing this series wayyyyy too far back on the calendar. Oh well. Next year, the goal will be to finish this series in March, but frankly, I just need more staff to make that happen. So please subscribe. Or, if you’re an advertiser (movie studio, FYC firm, or other), please reach out. Subscribe Streamer of the Year: Netflix Honorable Mention: Paramount (and CBS) So, just last week, I wrote about how Netflix has lost seven of its top twelve scripted shows in the last year. And I shared two very dour looks at Netflix’s potential slowdown this year and last. Guess what? They’re still the number one streamer in America. In 2025, they dominated new streaming shows (even if most of those new hit shows aren’t coming back for future seasons), they had the two biggest films, and they had the top returning TV show by a mile. The world is complicated, nuanced and messy. There may be warning signs of a future Netflix slowdown, but in 2025, Netflix was still the number one streamer. Note what I didn’t say? That Netflix has “won” the streaming wars, because obviously the streaming wars are still ongoing and, more importantly, YouTube is still growing—so now YouTube has “won” the streaming wars?—while Netflix’s share of TV consumption has stalled out. Avoid simplistic talking points, especially if they’re constantly repeated and could fit on a bumper sticker. I had trouble picking the second-place streamer this year, because all of the candidates for second place—Prime Video, HBO Max, and Paramount+—had some hits, but no one stood out. Then I saw this update from Nielsen on the top shows on TV in the 2025-206 season. Sure enough, Netflix had five of the top ten shows! And they had ten of the top 31 shows and fifteen of the top fifty. But CBS/Paramount+ actually had more shows in the top thirty and the top fifty. Paramount+/CBS had twelve of the top thirty shows and nineteen of the top fifty. Let me emphasize that: CBS/Paramount+ had more top shows in the 2025-2026 season than Netflix. And this look was just for TV shows, not live sports, an arena Netflix barely plays in. Meanwhile, Paramount-Skydance’s market cap is a fraction of Netflix’s. That’s weird, right? Streaming Loser of the Year, TV… We’re just getting started with this issue, but the rest is for paid subscribers of the Entertainment Strategy Guy, so if you’d like to find out… ...what streamer lost the year in TV... …whether Netflix could win the title for “film” streamer too… …who won the Disney vs Warner Bros. battle for theaters… ...what TV genres won and lost the year... ...what film genres won and lost the year... ...what film genre people think is thriving on streaming but isn’t… …why F-BOSSS TV shows don’t hold the same sway in the 2020s… …what it means to “flop” as a film on streaming… …UK shows underperforming on streaming… And a lot more... ...please subscribe! We can only keep doing this great work with your support. If you’d like to read more about why you should subscribe, please read this article about the Streaming Ratings Report, why it matters, why you need it, and why we cover streaming ratings best.
It’s my tree. Why can’t I cut it down?
Can the government stop you from cutting down your own tree? In many towns and cities these days, removing a tree now requires a permit. You might have to pay a fee, or promise to plant replacement trees. But sometimes, the city won't let you cut down the tree at all, even a tree in your own backyard.That's because trees are important for air quality, for flood control, and for public health. They help keep neighborhoods cool on hot days. But some think that tree protection laws have gone too far — that they might even be unconstitutional.On today's episode, it's the latest showdown between property rights and local zoning laws. Typically, towns and cities enjoy a lot of power when it comes to zoning and permits. They can ban certain types of buildings. They can make you paint your house a certain color. But can they make it illegal to cut down a tree? And what does it mean to "own" a piece of property anyway?Support:Planet Money+Read: Our book: Planet Money: A Guide to the Economic Forces That Shape Your Life Our weekly longform Planet Money newsletterOur weekly Indicator round-up newsletterFollow: InstagramTikTokYouTubeFacebookThis episode of Planet Money was hosted by Jeff Guo and Amanda Aronczyk. It was produced by James Sneed and Emma Peaslee, edited by Jess Jiang, and fact-checked by Vito Emanuel. It was engineered by Robert Rodriguez and Cena Loffredo. Alex Goldmark is our executive producer.
Politics Chat, June 11, 2026
A newsletter about the history behind today's politics.
🏆 Y! Sports AM: Greatest comeback ever
A Wu-Tang Clan prayer and a gutsy Knicks performance delivered magic at the Garden.
The U.S. and Iran Stumble Back Into War | WSJ Politics Newsletter for June 11
Plus, the dilemma facing women in Maine, and Bill Gates testifies to Congress over his links to Jeffrey Epstein.
Democrats Try to Move Past ‘Cultural Pandering’ to Latinos for Midterm Elections
The party is trying desperately to win back some voters in the key swing group.
Could Control of Congress Run Through Northern Maine?
The state’s vast rural areas, which make up the swing Second Congressional District, will be important in November.
Opinion | No Country for Ambitious Women
Republicans have spent years disparaging all things associated with women. Now Democrats are following suit.
🏆 Y! Sports AM: Best Stanley Cup ever?
It's starting to feel like we might be witnessing an all-time classic.
New OMB rule could break science in the United States
The drug that saved your mother. The treatment your doctor recommended. The clinical trial that bought someone you love more time. None of it was inevitable. It required a system built to operate outside politics and sustained over decades, because science doesn’t operate on the timeline of a politician. That system is now under direct threat. The Office of Management and Budget (OMB) has proposed a new rule to regulate all federal grants, not just science, but housing, education, defense, NASA and everything in between, that would fundamentally change how research is conducted in the United States. There have been a lot of fires in the past 16 months, and if everything is an emergency, nothing is an emergency. But this is a very big deal. These rules would strip away the independence that has kept science from becoming a political tool. The good news is there’s still something we can all do. How the grant system was designed to work When I was a new faculty member, I was full of millions of ideas, so I sat down and wrote an NIH proposal. I worked on it for months and thought it was so good. Then I sent it to my mentor. It came back covered in comments. Places where my reasoning wasn’t as airtight as I’d thought, methods that could be stronger, gaps in my thinking that I had been too close to the work to see. It stung, as honest feedback always does, but peer review almost always makes the work better. In fact, it’s the backbone of how American science has functioned for generations. At NIH, submitted proposals go to a panel of scientists who have experience in the field. These are the people who can read research methods and spot their weaknesses, who understand when an experiment is designed well and when it isn’t. Applications are scored rigorously, and often only the top 3-20% of proposals receive funding. The people making funding decisions are required to justify them based on these reviews. To be clear: this is not a perfect system, and good science still goes unfunded more often than any of us would like due to limited resources. There is also criticism that peer review may undervalue bold ideas that are risky but could have high payoffs. But the peer review system is nonetheless a meaningful part of the grant selection process. While thoughtful and careful changes could improve the system, the changes being proposed by OMB will not make things better. The rule that could change everything Through this OMB proposal, the system that helps decide what gets funded is being dismantled. There are many troubling elements buried in this proposal, but three provisions stand out in particular. Each would be damaging alone. Together, they would change what kind of science gets done in America, and who it serves. 1. Political appointees would decide which science gets funded, and peer review would be explicitly sidelined or ignored. The guidelines your doctor follows, the standards that determine what’s in your air and water, the drugs that get approved for your family: all of it starts with a funding decision. Right now, that decision is made by scientists who can evaluate whether the work is actually sound and whether it could move the needle forward. Under this proposal, funding decisions could be made by political appointees. The careful, expertise-driven review process that shapes grant funding would be effectively sidelined. That means that a poorly designed study could get funded simply because someone in a political office liked the sound of it, while rigorous, important work doesn’t get funded because it no longer aligns with the administration’s priorities. In other words, critical work that benefits all of us could now be missed just because it has become politically inconvenient. 2. Grants could be canceled at any point, without warning, in the middle of ongoing work. Say your tax dollars have been paying for a cancer study for two years. The grant was awarded for five years, so the team is mid-experiment. There are three additional years’ worth of answers that could change how the disease is treated for hundreds of thousands of people. With this new rule, the federal government could cancel the remaining funding tomorrow, walk away from the commitment it made with your money, and have no legal obligation to finish what it started. This is a huge waste of money. There are rarely other sources of funding for this work, which means the team, the graduate students, postdocs, and research staff who have dedicated years of their careers to this project could lose their jobs. Patients who have contributed their time to studies may not see it turn into useful learnings for others. Every hour of work already completed could result in nothing useful. Science can take decades to get to tangible outcomes. It needs a stable funding system to flourish. 3. Researchers would have a harder time communicating their findings without pre-approval from the federal government. There is a saying from Sir Mark Walport: “Science isn’t finished until it’s communicated.” Science is no use to anyone if it is kept locked away in the labs that produced the data. The proposed rule could make communicating research findings harder in a number of ways: Make it harder for scientists to widely share their findings in scientific journals. Publication costs, including journal fees that allow for broad public access, could not be paid for by federal funds which is often how scientists pay these costs. Restrict researchers from engaging publicly about how their findings should inform policy or public health guidelines. This would restrict scientists from doing the work that transforms years of lab work into decisions that actually affect people’s lives. Make it harder for scientists to attend conferences. Conferences would now need to be approved by the federal agency at the time of grant award. This disadvantages conferences or publications that are not politically aligned. Conferences are a key way in which scientists learn about work happening in their field so they can collaborate and build on each other’s findings. What good is science with a muzzle? The long-term impact These changes could (and hopefully would) be reversed under the next administration. But by then, damage has been done. Once projects are halted or denied funding by political appointees, people leave their science careers for other paths or even leave the country to do their amazing science elsewhere. You cannot pause a scientific study the way you pause a subscription you decided isn’t useful anymore. You cannot freeze a research team that depends on salaries to feed their families, causing a scramble for replacement funding that, in most cases, simply does not exist. When the money stops, everything stops, and all the work in progress and its potential are lost. Despite all of the language about reducing waste, fraud, and abuse, this new proposed rule increases the administrative burden tremendously. Every researcher watching this unfold will make a rational decision: don’t start anything that will take a decade to finish. This includes not building a team around funding that could vanish, or asking the big questions that need patience and stability to answer. The most consequential science, the kind that produces the treatments and the breakthroughs that reach your doctor’s office twenty years from now, is exactly the science that would be abandoned first. This is still a proposal, so we can all do something Some worry this rule is already a done deal. But by law, OMB is required to open a public comment period. Those comments matter because they inform members of Congress, they can be used in litigation, and they create a public record. So here’s what you can do: Submit a public comment. The public comment period on this proposed change is open until July 13. Anyone can submit a comment, and OMB is required to respond to substantial ones. Each comment must be different to count as distinct; identical comments will be counted only once. Comment as an individual, not on behalf of your organization. Here’s a full resource to help you, with useful examples, but in general: Share a story about how science or federal funding has benefitted you or is involved in your work. Are you or someone you loved a cancer survivor? Do you know someone with Alzheimer’s? Have you received NIH/NSF or other federal funding? All of these can be stories you use to highlight why you care. Explain why you’re worried about these proposed changes. You can use the wording found here or in other resources to help you. Ask them to withdraw this proposed rule. Contact your elected representatives. Congress allocates money to federal agencies to spend, and it has oversight of how that process works. You can let your representatives know this proposed change concerns you and ask them to intervene. There are levers they can push that can help at this moment. Let others know why federal funding matters. This isn’t just about science, but ALL federal grants, including for education systems, defense projects, and more. The process, including the importance of federal funding, is invisible to many. We can all make it more visible by sharing how science benefits us and why we value it. You can also share this article, or any of the resources linked here, to help spread awareness! Bottom line We are quickly losing ground in scientific research in the U.S. More changes, like the proposed rule by OMB, would decimate our ability to conduct research here, leaving us all worse off: fewer treatments for pancreatic cancer, less research on pollution impacts, fewer answers for patients with rare disease, and more unaddressed health needs. The impact will be very real for all of us, regardless of where we stand politically. Using our voices for science is more important than ever. Love, LM Big thanks to Dr. Megan Ranney for reading this over and providing brilliant insights, as always. Dr. Liz Marnik, PhD, is Executive Director of The Evidence Collective at YLE and a science communicator and immunologist working at the intersection of public trust, science, and public health. You can find her on Substack, LinkedIn, Instagram and Threads. Your Local Epidemiologist (YLE) comprises a team of experts, ranging from physicians to immunologists to epidemiologists to nutritionists, working together with one goal: to “Translate” ever-evolving public health science so that people are well-equipped to make evidence-based decisions. The YLE suite of newsletters reaches over 475,000 people across more than 132 countries. This newsletter is free to everyone, thanks to the generous support of fellow YLE community members. To support the effort, subscribe or upgrade below: Subscribe
Politics Chat, June 9, 2026
A newsletter about the history behind today's politics.
Toby Fox shares update on what's happening with Deltarune Chapter 6
Work continues on Deltarune, and creator Toby Fox provided an update on Chapter 6 today. In case you missed the news, fans won’t have to wait long to experience the next part of the game. Chapter 5 was featured in the Nintendo Direct presentation today and we learned that it’s coming out later in the month. In a newsletter, Fox...