SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " problem " 2,212 found 🔀 AI-powered Shuffle
Bosnia elections overshadowed by exodus and geopolitics as ethnic politics eclipse real problems
Bosnia goes to the polls on October 4 to elect several parliaments and presidents. While voters worry about the economy and emigration, the campaign is focused on ethnicity, exposing the country's political paralysis.
Wiegman explains why Chloe Kelly was dropped by England
Sarina Wiegman has explained why Chloe Kelly was left out of the latest England squad, with the decision coming before the forward’s current hamstring problem.Photo by Mike Hewitt/Getty ImagesSarina...
Sterling business owners want city zoning office changes
Six current and former Sterling business and property owners spoke at the Sterling City Council’s recent meeting about ongoing problems they say they are having with the city’s building and zoning department.
When “DEI” research is cut, what happens to community health?
“I’m just going to run to the grocery store!” How many times have we said this without thinking about it? For most of us, it's usually an easy walk or a short drive to get the cheese we forgot. In reality, though, 13% of the U.S. population (about 39 million people) live in “food deserts,” which means living more than a mile from a grocery store in urban areas and more than 10 miles in rural areas. This was the case for people in Pittsburgh’s Hill District, where a quick run to buy food wasn’t an option. In the 1930s, federal maps marked the Hill as "hazardous" for lending, a practice known as redlining that steered investment away from Black neighborhoods. Decades of disinvestment followed, and residents went about 30 years without a nearby grocery store. This made it hard to keep healthy eating habits and contributed to chronic disease. When a grocery store finally opened in the area in 2013, researchers saw the opportunity and launched the PHRESH study, which initially compared the health of participants from the Hill district to those in the Homewood district. Over time, the study expanded to other factors such as brain health and Alzheimer's risk. Residents like Roderick Blair overcame initial hesitation to share their health data, trusting it would benefit their neighborhood. Then, in August 2026, the NIH abruptly canceled the study’s grant, citing that it was “subjective” and fell outside their scientific scope—an effect of the administration’s interpretation of diversity, equity and inclusion (DEI). Research like PHRESH can help determine what changes in a neighborhood actually improve health, so cutting it has left that question unanswered. Other canceled studies have examined health issues like maternal health, preterm birth rates, or sickle cell disease. Courts have reversed some of these grant cancellations, but not all of them. If we really want America to be healthier, research into why some communities get sicker than others is absolutely critical. The law that created the federal minority health research institute passed with bipartisan support in 2000. But these days, as evidenced by grant cancellations, the political shift in attitudes toward DEI means we often lose access to the health information we need to help all communities thrive. DEI vs. health equity vs. equality and the overlap (or lack thereof) The letters “DEI” evoke very different reactions depending on who you are in the U.S. DEI programs can address gender, disability, age, and other factors, but the fiercest debate centers on race. For some people, hearing DEI brings to mind policies that may have cost them a job or a college seat because they are white. Others see DEI as a matter of justice: a way to expand representation and opportunity for groups that have been historically marginalized. Both perspectives are rooted in lived experience, and both center on the same question: whether hiring and admissions practices are fair. Hiring and admission practices, though related, are not the same as health equity. Health equity is “the attainment of the highest level of health for all people.” It’s the recognition that some groups of people consistently experience worse health outcomes than others. For instance, black mothers die from pregnancy-related complications at three times the rate of white mothers, and rural Americans are more likely to die from issues such as heart disease and cancer. Equity is also often conflated with “equality,” which leads to misunderstanding of how to actually best support communities. Equality ignores the fact that we aren’t all starting life with the same resources or circumstances, whereas equity is about helping people get what they specifically need based on their situation so they have the chance to achieve the same outcome as anyone else. For example, if every household in Pittsburgh got a $30 grocery gift card, that would be equal. But during the decades the Hill District went without a grocery store, that card wouldn’t have helped much. Equity means making sure everyone can actually access a store in the first place. DEI policies can overlap with health equity in many ways. For example, they may help expand access to quality education and stable, well-paying jobs, which in turn can provide health insurance, safer housing, and improved finances—all of which can reduce health disparities. But to make that happen, we first need data to identify disparities in communities and to develop solutions that effectively address them. What we lose when the research stops Community data is important to health equity because: You can’t fix what you don’t see: Data show which communities are most affected by health factors such as infection, heart disease, and cancer. If we don’t know what is happening and where, then we can’t develop interventions to help. Poor health costs everyone: Chronic disease is expensive—both to the individual person and to the overall economy. Understanding what groups of people are most at risk allows us to develop interventions that can save everyone money. Disparities exist for many communities: Health equity includes disparities that exist due to a whole host of factors, such as family background, race and ethnicity, rural vs. suburban residence, gender and sexual orientation, veteran status, disability, and lower income. This means many Americans can benefit from research into differences in health outcomes and how to improve them. Trust is easy to lose: Some participants in the PHRESH study were initially vocal about their concerns about participating. But that trust was earned because the researchers kept their promises and centered their work on the community. When projects are canceled mid-cycle, researchers have no choice but to leave behind communities they had promised to help. This hurts trust in the long run. It’s also a very inefficient use of resources, and it will take significant time and effort to redo the work when the government realizes this work is important again. How should we talk about health equity? This is hard because the words “equity” and “DEI” are currently very politically charged. So whether you’re a public health professional, teacher, or friend, how we talk about this topic matters. The right framing can help people who might otherwise be skeptical see why health equity research is important and deserves funding. Here are some suggestions to help your conversations: Choose your words strategically: Who are you trying to reach with your message? Are they likely to be resistant to terms like “diversity” and “equity”? If so, find alternative words to use to still get the message across. It is frustrating to be in that position, but the goal of improving health is too important not to try to make inroads. Sometimes simply reframing can help the message reach those who need to hear it. Focus on the problem: The terms “health equity” and “DEI” are abstract. Make it more specific. For example, discuss differences in maternal death or ways to improve health outcomes in rural communities. These still have equity at their core but will likely be better understood by those you’re talking with. Focus on systems: Disparities exist, but if they are communicated poorly, people can mistakenly think the issue is the individual’s fault. Disparities are largely driven by failures of the system—such as lack of access to health care and a long legacy of racism. When discussing the disparities, frame them around these systemic issues to ensure blame isn’t placed on the individuals impacted. Tell stories: Personalize these policies by using stories from those impacted that connect to the data you’re trying to convey. This helps make the policies and outcomes more concrete and meaningful. Bottom line Some communities end up sicker than others. That’s just the facts. We can argue about the best way to do that research, but canceling it simply because it may be linked to DEI doesn’t make anyone healthier. It just leaves communities like the Hill district behind. And in the end, it causes us all to move backward in our efforts to improve health in this country. Love, EM Big thanks to MacKenzie Isaac & Legairre Radden, who reviewed this piece and generously shared their expertise and lived experience to help improve it. Dr. Liz Marnik, PhD, is Executive Director of The Evidence Collective and a science communicator and immunologist working at the intersection of public trust, science, and public health. To discuss communication training on topics like health equity and storytelling, email Liz at liz@yle.health or learn more on our website. Your Local Epidemiologist (YLE) comprises a team of experts, ranging from physicians to immunologists to epidemiologists to nutritionists, working together with one goal: to “translate” ever-evolving public health science so that people are well-equipped to make evidence-based decisions. The YLE suite of newsletters reaches over 475,000 people across more than 132 countries. This newsletter is free to everyone, thanks to the generous support of fellow YLE community members. To support the effort, subscribe or upgrade below: Your Local Epidemiologist is a reader-supported publication. To receive new posts and support my work, consider becoming a free or paid subscriber. Subscribe
Boxed into a corner?
The Premier League has opened a Pandora's box of problems which cannot be closed. This looks like a gigantic mess, but could also become a bit of a joke, especially if they attempt to rewrite history, and change the winners' names on the Premier League and cup trophies over these past 15 years.
Naval Station Norfolk leader charts course for problem solving
Naval Station Norfolk commanding officer Capt. Ray Glenn discusses a $450 million sailor housing project and critical infrastructure funding shortfalls.
Patriots QB’s Biggest Problem Revealed by NFL Coaching Legend
Former NFL head coach Bruce Arians broke down what he thinks is the problem with New England Patriots quarterback Drake Maye. He spoke on the ‘Up And Adams’ show on Tuesday, and made his case.Drake Maye has had a difficult start to the 2026 campaign. He has started for 585 yards, one touchdown, and six […] The post Patriots QB’s Biggest Problem Revealed by NFL Coaching Legend appeared first on HEAVY.
Antarctic winter sea ice falls to third-lowest level on record as scientists warn of ‘now problem’
Coverage falls a million square kilometres short of long-term average with global heating likely driving losses
Pinellas '800-POOP' plumbing business permitting problems
The plumbing business at the intersection of 49th Street and 62nd Avenue is backed up in permitting problems, keeping the owners out of the building.
There's a cure for one of California's biggest health problems. Getting it is another matter
California is eliminating a key insurance hurdle for hepatitis C treatment, part of a broader push to get a long-available cure to the hundreds of thousands of patients who need it.
The ‘War Games’ problem: Computer science has long understood what it takes to keep AI under control
A hit 1983 movie illustrates what computer scientists have long known: If you give an AI agent a goal but don’t control what it can and can’t do, you shouldn’t be surprised by what it does.
iPhone 18 Pro Owners Complain of Speaker Crackling or Popping
Some iPhone 18 Pro owners have noticed an unusual crackling sound coming from the speaker of the device, leading to complaints on the MacRumors forums and Reddit. Users have called it a crackle, a faint tick or pop, or random clicking. Many say the problem is with the earpiece speaker, and both the iPhone 18 Pro and iPhone 18 Pro Max appear to be affected.
Kristaps Porziņģis' latest health problem is the same old story for the Warriors
The Golden State Warriors find themselves in a familiar position with Kristaps Porziņģis before the 2026-27 NBA season.
SNAP and Americans’ Health
In 1964, when Congress passed the Food Stamp Act, the country faced a problem of inadequate nutrition among low-income Americans due to insufficient food. In response, the Food Stamp Program—today known as the Supplemental Nutrition...
Federal designation helps FAU/NCHA Community Health Center expand local access
Access to high-quality primary care can make the difference between a health concern being identified early and becoming a more serious problem.
Clancy trial sparks maternal health discussion
According to the Ohio Department of Children and Youth, depression is a common problem during and after pregnancy.
Apple's $1,199 iPhone 18 Pro hits a problem software can't fix
Apple’s iOS 27.0.1 fixes iPhone 18 Pro Face ID freezes, but green and pink screen lines look like hardware.
Findings from the EHF Texas Health Tracking Poll 2025
The annual EHF Texas Health Tracking Poll 2025 also shows how health care affordability, food insecurity, and health are closely connected. Food-insecure Texans are more than 4.5 times as likely to have medical bill problems as those who are food secure, and health outcomes steadily worsen as food security decreases. Texans who regularly run short...
Thyme Companies Names Carolyn Starrett, Former Flatiron Health CEO, as Executive Vice President, New Ventures
/PRNewswire/ -- Thyme Companies, the family of businesses purpose-built to solve problems across the cancer care landscape, today announced that Carolyn...
iPhone Duo Reportedly Facing Production Problems Ahead of Launch
The iPhone Duo is reportedly facing production difficulties ahead of its October launch, with early output expected to be limited. A person said to be close to Foxconn's supply chain told China's Jiemian News that final assembly yields for Apple's first foldable iPhone were only slightly above 60% as of September 17. The source said that, under Apple's current quality standards, it could take another six months to a year for the assembly line to reach a mature yield.
Controversy erupts around Ace Combat 8 on PC as bundled Belkan War re-release remains problematically attached to the new game, whereas it's standalone on console
Early adopters of Ace Combat 8: Wings of Theve were not happy to find one of the game's most exciting pre-order bonuses isn't quite what was advertised.
Tuesday ‘Dawg Bites Knows Effort Counts Twice
Welcome to Tuesday, Bulldog Fans! Your Bulldogs are 4-0, and undefeated in conference play. 40+ points in each win, each by 4 touchdowns, ranked #2 in the land, and yet (we know, we know). These are the first world problems UGA fans face in this golden era of Georgia football. A wise man once told […]
AMLO Son Poses Political Problems for Mexico’s President Sheinbaum
Andrés Manuel López Beltrán has joined the list of figures who, critics say, may end up harming the left-wing movement his father founded, as well as the president who succeeded him.
Liverpool handed blow in chase for Premier League defender
One of Liverpool’s problem areas this season has been at left-back. Long-time first choice Andy Robertson left the club on a free transfer in the summer, and his presence is greatly missed.Milos Ker...
Editorial: Communication Problems – Sunderland Need To Sort It Out
Sunderland have transformed on the pitch, but are standards off it slipping back to the bad old days - and how long can supporters be expected to put up with it?
The Entrepreneurial Community Editorial: The Science of Lollygagging
Lollygagging was once a humble pastime practiced by children avoiding chores and adults who suddenly developed hearing problems when someone mentioned yardwork. We have since professionalized it—and government may have perfected it.
Gabe Evans, Dr. Oz discuss Medicaid, visit new UNC building in Greeley
U.S. Rep. Gabe Evans and CMS Administrator Dr. Mehmet Oz visited Greeley to discuss Medicaid fraud prevention, state budget pressures and UNC's new osteopathic medical school.
iPhone 18 Pro First Impressions: What Do You Think So Far?
It's been a little over a week since the iPhone 18 Pro models launched, and we want to hear from MacRumors readers. What do you think of Apple's newest iPhones? If you upgraded from an older phone, was it worth it? What about upgrading from an iPhone 17 Pro? What problems are you running into? Anything you love so far? MacRumors readers have already been sharing early opinions on the MacRumors forums, and there are interesting discussion threads to read through.
Angel Reese Is Becoming a PROBLEM for the WNBA
Remember when people questioned whether Angel Reese could become a legitimate WNBA superstar? That conversation looks ridiculous right now. Reese has been dominant in her first season with the Atlanta Dream, averaging 16.4 points and 12.1 rebounds while rewriting the record books. She became the first player in WNBA history to grab 500 rebounds in…
Axios Live: Utah's health worker shortage is more than a numbers problem
Utah's health care workforce shortage reflects gaps in pay, clinical training and access to career pathways
Counties urge action on state voter registration system amid backlog
The request comes as county election officials are working overtime to rectify the problem with the delayed voter registration applications.
Mathematicians Harness Randomness To Crack a 55-Year-Old Conjecture
After a long hiatus, the problem, which was likely inspired by juggling, has finally been resolved by a group of young mathematicians.
Packers Position Coach Put on Hot Seat After Brutal Start
The Green Bay Packers‘ offensive line is a massive problem. A lot of that can be attributed to the injuries on the line. However, just as much blame can be placed on offensive line coach Luke Butkus. There have been plenty of potential suggestions for the Packers to make changes in the layoff between Week […] The post Packers Position Coach Put on Hot Seat After Brutal Start appeared first on HEAVY.
Health issues or legal strategy? Defense and prosecutors clash over Cilia Flores’s condition
While lawyers for the wife of Nicolás Maduro claim she suffers from heart and gastric problems, the U.S. Attorney’s Office says the defendant has refused medical treatment, according to court filings
Falcons division rival falling apart already after 3 games
Baker Mayfield injury compounds problems for Buccaneers
Column: Voter ID ballot measure fixes a problem that doesn't exist
What’s so wrong about requiring every Californian to show a government ID before they’re allowed to vote?
Citizens admonish Sangamon Co mental health board
Citizens call for evening meetings and remind the board to remember the community's problems with race.
Why the AI boom makes inflation harder to tame
The US economy may have a new problem: It’s too strong.
Analysis | Trump says he has an off-ramp to his biggest political problem. He refuses to take it.
There is nothing holding back Republican political fortunes this year more than the war that President Donald Trump started with Iran.
Chronic disease is an economic problem as well as a health crisis
Employers and health systems can work together to improve prevention, screening and treatment – but sustained funding and better coordination are essential.
Rogers Tries to Make El-Sayed’s Health Care Plan Scary
_Taylor, Michigan_HERE’S HOW YOU CAN TELL Mike Rogers is anxious to make up ground in the Michigan Senate race: He held a press conference on health care last weekend. Health care is usually a rough issue for Republicans, because voters associate the GOP with attacking cherished programs like Medicare and Medicaid that Democrats have historically supported. It’s a particularly difficult issue in this campaign, because a few months ago Donald Trump and the Republicans refused to extend temporary financial assistance in the Affordable Care Act. As a result of that decision, more than 20 million Americans faced higher insurance prices this year. That’s not a policy choice you want to be defending at a time when voters frequently cite the cost of health care as a top concern. Throw in the fact that Democratic nominee Abdul El-Sayed can draw on his credibility as a doctor and former public health director in Detroit, and it might seem like Rogers’s best bet would be to avoid health care altogether. But Rogers had his reasons to spotlight health care last Saturday. And they became apparent a few minutes before he spoke, when members of his campaign staff There’s a lot happening. Too much, some days. We can’t promise to have all the answers. But we can promise to keep asking the questions, following the facts, and figuring things out alongside people who care about where this country is headed. Read with us. Learn with us. And when it matters, stand with us. Join the side you’re already on. Join Bulwark+
Can Science Solve Smoke Taint?
With wildfires an increasing problem worldwide, Chris Boiling investigates the solutions to smoke taint. Read the latest wine news & opinion on wine-searcher
A ‘Big Problem’: Trump’s War With Iran Drags Down Republicans in Midterms
As their November picture darkens, and gas and diesel prices soar, some Republicans who backed the war for months are now changing their tune.
‘It’s problematic’: Concern as Vogue World event sponsored by ‘skinny jabs’ maker
Partnership between Mounjaro maker Eli Lilly and fashion giant, suggests thinness is an aspiration says critics
‘It’s problematic’: Concern as Vogue World event sponsored by ‘skinny jabs’ maker
Partnership between Mounjaro maker Eli Lilly and fashion giant, suggests thinness is an aspiration says critics
South African police hunt killers after 27 gunned down in two separate shootings
South African police were on Sunday hunting the perpetrators of two separate shootings that killed 27 people within hours of each other, in stark reminders of the country's problem with gun violence.
Misery in Georgia: How John Mateer's play continues to be 'a problem' for OU
ATHENS, Georgia — John Mateer still is not cutting it in an OU uniform.
Assessment of Health Warning Label Compliance on Smokeless Tobacco Products in Bhubaneswar, India
Introduction: Use of smokeless tobacco (SLT) is a serious public health problem in India. Health warning labels (HWLs) play a vital role in imparting information regarding the adverse health eff...
Can you be healthy if you eat ultra-processed foods? I asked a dietitian
UPFs are linked to a range of health problems. But no-one seems to be able to agree why.
Northwestern's Achilles Heel Revealed in Loss to Indiana Hoosiers
Northwestern football has a major problem on defense that needs fixing.
Contaminated marijuana vapes sold at over 400 Colorado stores, health officials warn
Over 400 Colorado stores sold contaminated marijuana vaporizers that could cause health problems, state health officials said in a health safety advisory issued Friday.
Deion Sanders benches Julian Lewis, revives Colorado’s biggest problem
Deion Sanders benched Julian Lewis at Baylor, extending Colorado's post-Shedeur quarterback uncertainty as Isaac Wilson got his chance.
Kennedy Center put off planned repairs despite known structural issues, former employees allege
Some former Kennedy Center employees are accusing officials at the performing arts venue of long knowing about structural issues they recently cited as new problems | WBBM Newsradio 780 AM & 105.9 FM
Kennedy Center put off planned repairs despite known structural issues, former employees allege
Some former Kennedy Center employees are accusing officials at the performing arts venue of long knowing about structural issues they recently cited as new problems | WBEN
Kennedy Center put off planned repairs despite known structural issues, former employees allege
Some former Kennedy Center employees are accusing officials at the performing arts venue of long knowing about structural issues they recently cited as new problems. The anonymous whistleblowers...
🚨 Alarm in Madrid: medical update on Mbappé injury
A major blow for Kylian Mbappé and Real Madrid.After suffering an injury yesterday during the Nations League match between Turkey and France, Real Madrid has revealed the extent of his problem."Follo...
‘I can deliver’: Burnham pledges radical change on eve of Labour conference
Exclusive: UK prime minister says delivering fiscal stability would be ‘crucial’ to be able to fix bigger problems
🧩 Grêmio puzzle: Renato tests options to solve problem
Grêmio coach Renato Gaúcho has been using the FIFA break to test options and find the best setup for the midfield.The Tricolor manager knows he will not be able to count on the suspended Noriega in ...
Intel Panther Lake Teardown, 18A, BSPD, GAAFET, SemiAnalysis STEEL
Panther Lake debuts the first commercial implementation of backside power delivery (BSPDN), introduces Intel’s first iteration of gate-all-around (GAA) transistors, and showcases their advanced packaging capabilities with its Foveros-S assembly. With Panther Lake, Intel’s manufacturing arc has shifted from nebulous roadmaps to shipped silicon, a significant milestone on their long road back to competitive semiconductor manufacturing. To evaluate the extent of Intel’s comeback, we tore down Panther Lake. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Our teardown traces 18A from its four-sheet RibbonFETs (Intel’s marketing name for GAAFETs) and gate stacks through contacts, frontside and backside wiring, and the bonded carrier. We explain how these material and integration choices improve gate control and reduce resistance, while adding capacitance, thermal resistance, and process complexity. Our measurements put Panther Lake’s 18A compute logic and TSMC N3E GPU logic at similar logic density. However, 18A does not lead TSMC N3P, N2 or Samsung SF2 in peak density. Panther Lake’s CPU cores are incremental updates, and the high-end GPU still uses TSMC N3E. Panther Lake assembles one compute tile, one GPU tile, and one I/O tile atop a passive base tile using Intel’s Foveros-S advanced packaging. Both compute tile variants use Intel 18A. The Xe3 GPU options are a 4-core GT1 tile on Intel 3 and a larger 12-core GT2 tile on TSMC N3E. Both I/O tile variants use TSMC N6. [1], [2] Our analysis centers on the PTL-U compute tile, both the 4-core and 12-core GPU tiles, as well as the 12-lane I/O tile. In conventional chips, power and signal are routed through the same frontside metal stack towards the device frontend. Power rails consume scarce routing resources near the transistors, while tall via stacks carry VDD and VSS from the coarse upper wires to local rails. Backside power delivery (BSPD) moves the main power network behind the transistor layer, to the backside, separating it from frontside signal routing. We covered BSPD and its impacts in 2024. [3], [4], [5] Intel’s BSPD implementation, branded as “PowerVia”, routes power through dedicated backside metals to nano-TSVs, which connect those rails to local source/drain (S/D) contacts. Implementing that separation requires Intel to build the interconnect stacks from both sides of the wafer. The frontside comprises the M0-M14 signal stack, while the backside comprises the BM0-BM5 power stack. M0 and BM0 are closest to the transistors. The nano-TSVs connect the two sides, but Intel patterns and etches each via from the front after forming the contacts. A narrow via runs from the side of the contact deep into the silicon substrate. Intel then completes the frontside signal metal stack, bonds the wafer to a carrier, flips it and removes the original substrate until the buried via tips are exposed. The backside metal stack is then deposited directly on the revealed vias. The nano-TSV and backside-via profiles taper in opposite directions because Intel forms them from opposite sides of the wafer. The transistor structures form the FEOL. Local contacts and nano-TSVs connect them to the wiring. M0 begins the frontside interconnect stack. The silicon carrier remains attached above the frontside interconnects. It supports the device wafer during substrate removal and backside processing and remains part of the finished chip’s thermal path. PowerVia removes the main power distribution from the congested frontside metals, routing supply through shorter and wider backside wires. Its lateral landing still occupies area in the standard cell, so it recovers less cell area than a direct backside contact. [3] Nano-TSVs beside the logic devices carry VDD or VSS from the backside power network, while signal connections continue upward through the frontside metals. Backside Interconnects Samsung SF2 data is included for comparison to Panther Lake’s within this article. SF2 is the incumbent GAA foundry node but lacks BSPD, serving as a useful reference to evaluate 18A. A full teardown of Samsung’s S26 products, processed on SF2, will be shared soon.Nanosheet-cut EDS comparison. The PowerVia supply path runs from the backside Cu rails through Mo-lined W nano-TSVs to the local transistor contacts. In this cross section, the tapered connection spans roughly 150 nm from the contact level to BM0. The Ta liner confines Cu and promotes adhesion to the surrounding stack; the AlOₓ etch stop controls the next dielectric etch above the rail. Dielectric beneath the ribbons electrically separates the devices from the backside wiring and removes the conducting silicon body below the channel. [6] AlOₓ serves as an etchstop (ES), enabling endpointing and protecting the underlying layers. Low-volatility aluminum fluoride reaction products resist the fluorinated plasma, allowing a thin AlOₓ film to protect the metal while the surrounding low-k dielectric is removed. [6], [7]. While the BM0 and layers above the M1 lines show double AlOx layers, Our SMIC N+3 teardown showed single AlOₓ layers. SMIC uses a simpler local AlOₓ substack, while the remaining cap and etch sequence provide the required landing protection. So why double layers? The closely spaced AlOₓ doublets provide two protected endpoints in the etch sequence. Intel documents an AlOₓ/SiN/AlOₓ stack that explains the benefit. The main dielectric plasma etch stops on the first AlOₓ film; a selective wet clear opens that film; a second plasma etch removes the intermediate SiN and stops on the second AlOₓ film. The final wet clear exposes the metal landing surface. SiN is the intermediate dielectric in Intel’s published example. [8] The second stop protects the metal through a cap breakthrough. Wide openings can etch faster than narrow ones, and etch depth varies across the wafer. Metal under an early-clearing opening would otherwise be exposed while other openings still need more etching. Staged protection widens the process window and reduces metal erosion, corrosion and void formation. [8] TSMC documents AlN/AlOₓ/SiOC/AlOₓ above Cu, with AlN blocking Cu diffusion, and a simpler AlN/SiOC/AlOₓ variant that omits one AlOx film. [9] Levels with different opening sizes, aspect ratios, pattern densities and cap materials need different etch margins. A double AlOx stop is useful where another protected endpoint justifies the added processing. The extra film adds formation, selective opening and cleaning steps, plus another set of interfaces to control adhesion, moisture, and stress. These blanket films are opened through the existing via pattern, so each film does not require another lithography mask. AlOₓ adds parasitic capacitance when it replaces lower-k dielectric; two thin AlOₓ films can nevertheless contain less AlOₓ than one thick film. Total thickness, placement, and theintermediate dielectric determine the electrical cost. Deposition chemistry also changes AlOx permittivity and residual hydroxyl content, which can oxidize the underlying metal. [7], [8], [10], [11] The backside stack separates into relatively fine BM0-BM2 wiring near the devices and coarser BM3-BM5 power distribution. The largest pitch increase occurs between BM2 and BM3. BM0’s pitch closely matches the logic-row height, fitting local power delivery to the cell rows. Higher levels aggregate current through larger conductors: routing density becomes less important than low resistance and current capacity as the network approaches the package. This hierarchy provides wide power wiring for the power delivery network without consuming scarce frontside signal-routing resources. [3] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Frontside Interconnects Intel 18A combines Mo-lined W contacts and nano-TSVs with a separate backside Cu power network. Samsung SF2 keeps power on the frontside, using Ti-based contact interfaces and Ta-based barriers and Co liners around Cu wiring. In 18A standard-cell rows, backside power rails supply the devices through nano-TSVs within the cells, freeing frontside routing resources. Samsung’s M0 accommodates both power and signal connections. From the device toward M0, the connection runs through a Ti-based S/D interface, W contact fill, a Mo-lined W via, and the Cu M0 wire. Mo supplies a conductive nucleation and adhesion layer for W, replacing the resistive TiN liner used in conventional W integration. This increases the effective conduction volume within the feature while retaining W fill and its established polishing, cleaning and etching processes. Intel’s Mo/W patent describes this integration tradeoff. The nano-TSV uses the same Mo-lined W construction in the backside supply path. [12] The move from TiN to Mo is an incremental change. While a full Co or Mo fill can also reduce the volume lost to liners in very small features, it requires new integration schemes that increase complexity and risk. Cu remains attractive for wider wires due to its low resistance. As wires and vias shrink, the diffusion barrier consumes an increasing fraction of their cross-section. [12], [12], [14] Intel uses Co/Ru liners at M0-M1, Co at M2-M4, and Nb at M5-M9. The lower-level liners help Cu adhere and reduce void formation during trench fills. Applied Materials’ Endura has new thermal control that facilitate wetting process, so the thin film continuity is good enough that good capillary pressure will drive Cu atoms to the via bottom without voiding. Intel’s choice to use Nb is particularly interesting. Intel’s Nb patent describes a conductive diffusion barrier intended to reduce the barrier’s contribution to resistance relative to conventional Ta-based barriers, particularly at via bottoms where all current crosses the barrier. The patent pairs Nb in coarser levels with the option of lower-cost PVD processing. [15], [16] The upper metal layers support thicker barriers formed through physical vapor deposition (PVD) despite its worse coverage and uniformity. Meanwhile, the lower metal layers require thinner barriers deposited through conformal atomic layer deposition (ALD). Co/Ru adds another material interface and requires controlled deposition and Cu fill. Changing liners and barriers by metal layer allows Intel to optimize interconnect resistance, process complexity, and reliability. [15, 16] RibbonFET, Intel’s name for its gate-all-around FETs (GAAFETs), replaces the FinFET’s vertical fins with four stacked horizontal silicon nanosheets, allowing the gate to surround the channel on every side. The path to GAAFET begins with the planar transistor. A planar MOSFET places the gate above the channel between its source and drain. Pairing an NMOS with a PMOS transistor creates a CMOS inverter, in which the NMOS pulls the output low for a high input, and the PMOS pulls it high for a low input. The gate must retain electrostatic control of the channel to ensure clean switching. As gate lengths shrank, the drain began to compete with the gate for that control, increasing off-state leakage. Electrostatic control was restored through an architectural evolution that raised the channel into a vertical fin and wrapping the gate around three sides. Called “FinFET”, this new architecture packed more effective channel width into a smaller footprint. Further scaling made it harder to maintain both drive current and leakage within smaller cells, and reintroduced the same problems planar MOSFETs faced. Nanosheet GAAFETs close the fourth side by replacing the vertical fin with a stack of horizontal nanosheets, each surrounded by the gate. The tighter electrostatic control suppresses leakage at shorter gate lengths while stacking adds effective channel width within the cell footprint. In a FinFET process, channel width changes in discrete steps as designers must add or remove whole fins. Nanosheet width can instead be adjusted continuously within the process’s design rules. Wider sheets increase drive current, while narrower sheets reduce capacitance at the cost of drive current. Intel 18A uses stacks of four nanosheets each and varies their widths across logic and SRAM. At the process level, adding more sheets to each stack increases effective channel width and drive current, but complicates fabrication. RibbonFET vs MBCFET Samsung began GAAFET production in 2022 with SF3E, following with SF3 and now SF2. Its ‘MBCFET’ provides a useful structural comparison with Intel’s first RibbonFET implementation. [17] STEEL is digging deeper into SF2, used in the Exynos 2600, and TSMC’s GAAFET N2, used in Apple’s A20 Pro, in upcoming newsletter articles. We’re throwing some teasers on X. Let’s compare Samsung SF2’s MBCFET with Intel 18A’s RibbonFET. Subscribe Even to the untrained eye, Intel’s extra nanosheet is obvious. Intel stacks four ribbons to Samsung’s three. Samsung’s sheets are much wider in these fields, so both sheet count and width matter to the available channel perimeter. Sheet width also changes which silicon surfaces carry current. On conventional (001) silicon, wide nanosheets emphasize the broad top and bottom surfaces, favoring electron transport; the larger sidewall contribution in a narrow sheet favors hole transport. Thinner sheets improve gate control but increase confinement and scattering. This makes width and thickness part of the NMOS/PMOS balance, alongside strain and threshold voltage. [18], [19] GAAFET designs like 18A use different work-function-metal (WFM) stacks for NMOS and PMOS. Around each ribbon, a thin SiOx interfacial layer separates the silicon channel from the HfOx high-k dielectric, with La providing dipole tuning and the WFM wrapping the dielectric. NMOS uses a TiAl-based stack, while PMOS uses TiN WFM. W fills the remaining gate trench, providing a lower-resistivity path where the work-function layers are no longer needed. In this field, the PMOS stacks leave room for W between ribbons, while the NMOS stacks occupy more of those gaps. A silicon-based dielectric marks the P/N boundary, allowing the PMOS and NMOS gates, sharing the same gate trench, to be processed sequentially. Fast logic paths, retention circuits, and SRAM need a family of threshold options. Changing threshold without substantially changing device dimensions, capacitance or fabrication complexity is valuable. FinFET processes typically use different work-function-metal stacks. In a four-ribbon GAA stack, the narrow sheet-to-sheet gap limits how much WFM can fit around each channel. La in the gate dielectric creates interfacial dipoles at the SiOx/HfOx boundary, shifting effective work function and tuning threshold voltage. This gives Intel another control alongside its NMOS and PMOS WFM stacks. Low-threshold devices improve critical-path drive; higher thresholds reduce leakage elsewhere. Dipole tuning is especially useful in GAA because it changes threshold without consuming the narrow intersheet gap with thicker WFM. Precise control of La incorporation, diffusion and interface quality has long been a challenge, limiting viability in high volume production but is now seen from every leading-edge foundry. Intel’s patent describes depositing a dipole-forming oxide above HfOx and annealing it toward the interfacial oxide before completing the work-function and fill metals. This separates threshold tuning from the space available for metal. Newer research addresses the thermal cost: imec’s 2026 dipole-middle research inserts the shifter between two HfOx depositions, shortening the diffusion path while protecting SiOx during patterning. [20], [21]Matched-cut EDS, Intel 18A (left) vs. Samsung SF2 (right). Intel retains raised source/drain epi beneath its contacts, while Samsung recesses W deep into the epi to form a V-shaped Ti-lined interface. The deeper contact increases metal-to-semiconductor area and shortens the current path from the lower sheets, reducing contact and spreading resistance. It also removes epi volume and brings the contact etch closer to the channel ends. Retaining more epi preserves the material available for strain transfer, especially from SiGe into PMOS. These geometries balance contact access against stress engineering and etch margin. [22], [23] Samsung stacks three sheets to Intel’s four ribbons, and both processes use sheet width to tune drive strength. In our Samsung cross-sections, widths range roughly from 19 to 30 nm in the NPU rows and 37 to 50 nm in the CU cell. The Samsung nanosheets taper, with the widest sheet at the bottom and the narrowest at the top. Both processes use HfOx gate dielectric and Ti-based work-function stacks, with Al in the NMOS stack. In the Samsung devices shown here, the dielectric and WFM occupy the intersheet gaps, leaving W above the top sheet. Intel’s PMOS stack leaves more room between ribbons, and W fills those gaps while the thicker NMOS stack leaves W mainly in the upper trench. Gate-stack EDS maps. The W between Intel’s PMOS ribbons provides a conductive path close to the lower gates. Where WFM fills the entire gap, the gate still surrounds the channel, but voltage reaches it through the more resistive work-function films. Thinner WFM and dipole tuning preserve room for low-resistivity fill; Mo and Ru are alternative fill metals being developed for further scaling. [24] A masked, sequential WFM flow explains the different gate heights and inter-nanosheet fill. The proposed sequence below shows how separate NMOS and PMOS work-function steps produce that geometry. Enabled by the BSPDN process, Intel replaces the dense-logic silicon subfin with dielectric, removing the parasitic conduction path below the ribbons and reducing substrate-related capacitance. A retained silicon body as in classical, non-SOI, planar and FinFET designs needs junction and punchthrough-stop engineering to suppress leakage. Dielectric isolation makes that leakage less sensitive to the subfin doping profile but adds removal and fill steps. It also weakens the direct thermal path through silicon, making the contacts, metal stacks and package more important for heat extraction. [24], [26] Fluorine is concentrated around selected Intel device structures in the maps. WF6 is a standard precursor for W nucleation and fill, while barrier films protect adjacent dielectrics from fluorine attack. Low-fluorine W processes reduce the residual-F burden. Chloride-based precursors avoid introducing F during W deposition, but require control of chlorine attack, nucleation and fill quality. The integration target is a continuous, low-resistance W path with a thin protective liner and minimal chemical damage to the surrounding stack. [20], [27], [28] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. We measured cell height, gate pitch, metal geometry, and ribbon dimensions at the XTEM sites shown below. The tables group these dimensions by site and device polarity. Our “sheet cuts” cross the silicon channel and show the ribbons end-on. “gate cuts” run along the channel through successive gates. The 18A logic cell dimensions point to a five-track logic library while the N3E and Intel 3 cell dimensions evidence a seven-track logic library. The DDR-PHY uses wider M0 wires and much larger spacing than core logic. That trades routing density for lower wire resistance and weaker coupling between neighboring nets. The geometry suits the current delivery and coupling requirements of analog, clock, and I/O circuitry. PowerVia lets 18A combine a compact cell height with wider M0 geometry by moving the main power rails off the signal-routing tracks. That relaxes local wire scaling while preserving a small cell footprint. Cell height and gate pitch set the geometric density; pin access and routability determine how much of it a real block can use. [29] The biggest takeaway from our gate-pitch measurements is that Intel 18A compute logic and TSMC N3E GPU logic have similar density in the Bohr representative-cell model. The 18A example is 18.6% denser than the Intel 3 GPU example. Gate pitches are nearly identical across the three sites, so cell height drives most of the difference. The Bohr model combines a four-transistor NAND2 spanning three gate pitches and a 32-transistor scan flip-flop (SFF) spanning nineteen pitches, weighting their densities 60:40. The sensitivity column shows how independently changing cell height and gate pitch by ±1 nm changes the result. This compares representative cell geometries; whole-die density also depends on cell mix and placement. The 18A P-core gives M0 substantially more metal cross section than the N3E vector engine. Treating each profile as a trapezoid gives 2.63 times the area per line and 1.84 times the area after normalization by routing pitch. The larger section reduces the geometric contribution to line resistance and lowers current density for a given current. Taller and wider wires also add capacitance, so circuit delay depends on the balance of resistance and capacitance. The DDR-PHY has less metal area per routing width than the 18A core fields, while remaining above N3E. [30] Area = height × (top CD + bottom CD) / 2, including liners. Area/pitch normalizes by routing width. Taper is the symmetric sidewall angle from vertical, with the largest angle belonging to the DDR-PHY. Compute tile The measurements show how ribbon dimensions and gate-stack geometry vary across the compute tile and between NMOS and PMOS to balance channel drive, gate load and the space needed for the dielectric/WFM stack across logic, SRAM and the DDR-PHY. Width mainly changes available channel perimeter; thickness also changes electrostatic control and carrier confinement. Gate-stack thickness then determines the space left for low-resistivity fill P-core and LP E-core logic Both the P-core and LP E-core use multiple nanosheet widths. Widths are measured on high-magnification XTEMs while wider-field images demonstrate additional width choices within the LP E-core. Multiple widths are expected even within an LP E-core. Timing-critical paths, buffers and cells with different fanout need different drive strengths. The lower-magnification fields show this width diversity beyond the sites quantified in the table. L2 and L3 SRAM GAA gives SRAM designers another way to balance the pull-up (PU), pass-gate (PG), and pull-down (PD) transistors. FinFET bitcells set device strength through fin count while GAA adds nanosheet width as a sizing knob. In a 6T SRAM cell, a strong pull-down relative to the pass-gate limits read disturbance, while a strong pass-gate relative to the pull-up improves writability. During a write, the pass-gate and write driver pull the node storing “1” below the inverter trip point. During a read, the pull-down holds the node storing “0” low. Bias, threshold voltage, mismatch and assist circuitry set the remaining margin. FinFET high-current cells commonly use a PU:PG:PD fin-count pattern of 1:2:2, a device-sizing ratio rather than a current ratio. Ribbon width lets Intel balance SRAM strengths without adding whole fins. The L2 cell uses its narrowest ribbons for PU and widest for PD, improving writability and read stability respectively. Intel’s disclosed HCC operates without assist; its denser HDC uses negative-bitline write assist. Pulling the selected bitline briefly below ground increases pass-gate overdrive so it can overpower the pull-up at lower supply voltage. That buys density and low voltage writability at the cost of boosting circuitry, switching energy, and additional voltage stress that must be controlled. [31], [32] Four rectangular ribbons give the perimeter = 8 × (width + thickness), before corner rounding. PG/PU is 1.49 and PD/PG is 1.16. The L3 structures closely resemble L2 in layout and cell height. Fewer L3 nanosheet widths are tabulated because fewer high-magnification images were available. DDR PHY The DDR-PHY trades density for controlled analog behavior and reliable off-chip signaling. It contains drivers, receivers, delay circuits, and calibration logic that set drive strength, sampling time, and voltage margin. Repeated four-sheet devices with similar widths fit the use of regular transistor units for matching and programmable drive. Its wider local wiring provides room for current delivery and separation of sensitive signals, while consuming more area than a dense core-logic grid. The layout serves the memory channel’s electrical requirements as well as digital logic density. [33] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Intel 3 GPU devices Vector engine logic Intel 3’s XVE logic uses two-fin PMOS and NMOS devices with power rails in M0. Its cell height and M0 pitch give a seven-track geometry, two tracks more than the 18A logic. One-fin groups also appear among the two-fin devices. Intel 3 L2 SRAM The Intel 3 L2 SRAM uses the familiar HCC sizing pattern: one PU fin, two PG fins, and two PD fins. N3E GPU devices Vector engine logic The N3E XVE field contains repeated two-fin devices with seven-track cell geometry. N3E remains a FinFET process, giving Panther Lake a direct FinFET-to-RibbonFET comparison. N3E L2 SRAM The N3E L2 SRAM uses the same PU:PG:PD fin-count pattern of 1:2:2. Panther Lake-U follows Lunar Lake’s floorplan quite closely. Both pair 4 P-cores with 4 LP E-cores and NPU, media and display engines in similar locations. Lunar Lake also uses Xe2, the direct predecessor to Panther Lake’s Xe3 GPU. This makes Lunar Lake the most direct basis for our comparisons. Arrow Lake differs in core count and uses the older Xe-LPG GPU architecture, so we only use it where it offers a more direct component-level comparison. Compute tile Panther Lake compute-tile floorplans remain sparse even months after launch. Intel 18A’s backside metal and dielectric stack must be removed without damaging the underlying structures before a clean transistor-level floorplan can be imaged. Most published die shots hide or heavily process the background, but we are quite proud of the die shot we achieved and are excited to show the work we have done. We measured the areas of the key components on the compute tile and compared them with their Lunar Lake predecessors on TSMC N3B. These help us to capture changes in block area and compare the two chips across process nodes and designs. Our total tile areas exclude the scribe-line area. The compute-plus-GPU subtotal below uses the PTL-U compute tile and GT1 GPU; it excludes the I/O tile and passive base. Individual block areas use the boundaries marked on the floorplans The compute-plus-GPU row is recomputed from the displayed PTL-U and GT1 areas. Component rows use their stated per-region counts and are not an additive partition of the whole tile. The P-core area remains almost unchanged between Lunar Lake and Panther Lake, despite L2 capacity increasing from 2.5 MiB to 3 MiB. Arrow Lake uses the same Lion Cove core as Lunar Lake but also has a 3 MiB L2. Cougar Cove fits 20% more L2 into the same P-core area. The larger private cache keeps more of each core’s working set close to its execution units, reducing access to shared L3 and DRAM. Extra capacity adds storage leakage and lookup energy, so designers balance it against avoided lower-level accesses. The shared P-core L3 cache also shrank by 14.8%. [2] Cougar Cove combines a similar footprint with Intel’s reported power-efficiency improvements. RibbonFET’s tighter channel control reduces leakage, while PowerVia reduces supply droop and allows tighter voltage guardbands. [1] Darkmont’s four-core LP E-core cluster is 5.0% smaller than Skymont’s on Lunar Lake, with most of the reduction in its L2 regions. The 1 MiB region shrank by 8.4% and the 1.5 MiB region by 14.9%. The tag arrays also use one fewer visible row. Tags identify which memory addresses the data array holds, so rearranging them changes the cache’s layout and wiring without requiring less data capacity. [2] The LP E-cores share one L2. This pools capacity and avoids duplicating all the cache machinery, but the four cores contend for its banks and bandwidth. Their separate cluster also keeps light work away from the performance cluster and its L3, allowing that larger domain to sleep. [1], [2] Cache area includes more than the storage cells. Tags identify each line, decoders select rows, sense amplifiers read the small bitline signal, and wires connect to the banks. Splitting an array into smaller sections shortens wordlines and bitlines, improving access speed, but duplicates peripheral circuits. Panther Lake’s smaller cache regions therefore reflect the complete memory implementation, including how much of each region is devoted to storage. [34] Unlike Meteor Lake and Arrow Lake, Panther Lake has no separate SoC tile. The NPU, LP E-cores, memory controllers, PHYs, media and display engines now share the compute tile. This removes an active die and keeps CPU memory traffic on one die. The cost is moving PHY and I/O-related circuitry onto 18A: drivers, receivers and analog circuits must still meet external voltage, loading and signal-integrity requirements, so their area does not shrink like dense digital logic. [1], [2] The biggest shrink comes from the NPU, which occupies 36.9% less area. NPU 5 consolidates the same total INT8 MAC count into half as many neural compute engines. Each of the three NCEs has a larger MAC array to make the complete NCE envelope 22.6% larger than an NPU 4 engine. Consolidation also halves the number of scratchpads and SHAVE DSPs, from 12 to 6. The MAC array handles matrix multiplication and convolution, while SHAVE executes vector and custom operations that fit the array poorly. [1], [2], [35] The paired floorplans identify each NCE envelope and its scratchpad, MAC, and SHAVE regions. Each measured MAC polygon is counted once per NCE in the area accounting below. The scratchpads store weights, activations, and intermediate results near the MAC arrays, allowing repeated use without fetching them again from DRAM. Halving their number delivers the largest measured area saving but leaves less local storage for the same total MAC count. Layers that no longer fit locally require smaller working tiles or more transfers of intermediate data. The benefit depends on keeping the enlarged arrays busy while managing that tighter storage budget. [36] NPU 5 also adds native FP8. Using half the operand width of FP16 reduces storage and transfer demand, helping workloads fit the smaller local memory budget. Lower precision and format-dependent range make scaling and model validation part of deployment. Hardware activation functions further reduce work that would otherwise occupy the programmable DSPs. [1], [2] Microsoft requires an NPU to deliver at least 40 TOPS for Copilot+ PCs. Both Lunar Lake and Panther Lake meet this threshold, but Panther Lake uses significantly less silicon. GPU tiles Panther Lake is Intel’s first product with Xe3, its latest GPU architecture. It offers two different GPU tiles: a smaller GT1 tile with 4 Xe3 cores on Intel 3 and a larger GT2 tile with 12 Xe3 cores on TSMC N3E. Panther Lake allows us to compare the same GPU architecture across both Intel 3 and TSMC N3E. Wildcat Lake adds a third Xe3 implementation on Intel 18A. A future newsletter will detail Xe3 and its implementation differences across all three process nodes. GT2 scales Xe3 to a different physical layout, with render slices arranged vertically instead of GT1’s horizontal arrangement. Slice placement sets the distances to shared cache banks and the D2D interface. Those wires consume area and add delay, so scaling the number of Xe cores also requires a new balance of cache placement, routing and timing. [1] What’s immediately obvious is that the GT2 tile on TSMC N3E has much smaller Xe cores than GT1. These block areas include logic, caches, and routing. An Xe core on the GT1 tile is ~69% larger than one on Lunar Lake, and ~55% larger than one on GT2. Intel 3 therefore uses substantially more area per Xe core. The block-area gap exceeds the measured logic and SRAM density gaps, bringing routing, timing targets, cell mix, and floorplan allocation into the comparison. The measured vector/matrix engine region is almost unchanged between Lunar Lake and Panther Lake’s GT2 tile. Xe3 retains eight 512-bit vector engines and eight 2048-bit XMX engines per core. Its gains also come from feeding those engines more effectively: more resident threads hide stalls, and variable register allocation lets shaders trade registers per thread against the number of threads kept active. [1] The shared L1/SLM capacity increased by 33% from 192 KiB to 256 KiB, while its area increased only 5%, raising effective density by 27%. L1 retains reused cache lines, while software-managed SLM lets a thread group share data locally. Both reduce traffic to more distant memory. Allocating more SLM per group can also limit how many groups reside on a core at once. [1], [37] The GT1 tile carries 4 MiB of L2 against 16 MiB on the GT2 tile. GT1 divides its L2 cache into four 1 MiB banks, while GT2 uses eight 2 MiB banks. Each bank contains 128 macros, but each N3E macro stores 16 KiB, twice the Intel 3 macro’s 8 KiB capacity. The N3E macro is only 54% larger while holding twice as many bits, giving it 30% higher density: ~23.7 Mbit/mm² versus 18.3 Mbit/mm². Including bank-level circuitry, the gap widens to ~16.9 Mbit/mm² on GT2 versus ~10.4 Mbit/mm² on GT1. GT2 gains density with its macros storing more bits per unit area, and those macros occupy more of each cache bank. Larger macros spread decoder and sense-amplifier overhead across more storage, while a more compact bank layout reduces the share spent on control and routing. The compromise is longer wordlines and bitlines that carry more capacitance. [34] I/O tile Panther Lake uses two I/O tile variants, both fabricated on TSMC N6. The smaller one provides 4 PCIe 5.0 and 8 PCIe 4.0 lanes and serves lower-tier systems as well as those without a discrete GPU, while the larger one adds 8 PCIe 5.0 lanes, bringing the total to 20 lanes, for discrete-GPU connectivity. Panther Lake SKUs with the larger 10- or 12-Xe GPUs use the smaller I/O tile. [38] The smaller I/O tile adds a PCIe 4.0 block and a Thunderbolt block to Lunar Lake’s I/O layout, providing four additional PCIe 4.0 lanes and another Thunderbolt 4 port. Its repeated N6 blocks retain nearly identical areas and layouts. Reusing these proven PHYs and controllers avoids porting and requalifying external interfaces on 18A, where faster digital logic offers less benefit to circuits constrained by the off-chip link. [38] SemiAnalysis’s teardown lab (STEEL) dives deep into the world’s advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. We’re hiring technical experts from system to transistor and everywhere in between. Check out our Careers page. Panther Lake offers scalability and modularity through its disaggregated packaging that partition compute, GPU, and I/O silicon into separate tiles allowing for a suite of tile configurations. This partitioning makes the package part of Intel’s node economics as it determines how much leading-edge wafer area each product consumes, which functions can remain on other processes, and how much configuration freedom Intel can offer from a shared set of tiles. Furthermore, fabricating the compute and GPU tiles separately confines the new 18A process to the compute tile and allows graphics and I/O to use other, more established, and more cost-effective processes. For Panther Lake, the GPU and I/O tiles are assembled alongside the compute tile on a passive silicon base using Foveros-S. Intel’s current technology brief lists a nominal 36 µm pitch for Foveros-S. Through-silicon vias (TSVs) in the base connect the fine wiring above to the larger package connections below. The functional tiles sit side by side on that passive base in a 2.5D configuration. [39] Our cross-section through the compute and GPU tiles shows the package’s wiring hierarchy. Microbumps connect each active tile to the passive silicon base; its fine redistribution layer (RDL) carries the short, dense tile-to-tile links. TSVs carry connections through the base to the package substrate, which fans them out to the much coarser motherboard solder joints. The base supplies interconnect, while computation remains in the active tiles above it. [39] At the compute-tile edge, the higher-magnification inset shows a local microbump spacing of approximately 25.24 µm and a feature width of 12.33 µm. These local spacings are finer than Intel’s nominal Foveros-S value. The X-ray fields further confirm tighter neighboring bumps, consistent across every die-to-die area found on each tile. Additional X-ray analysis is offered after the paywall. Putting the memory controller beside the CPU removes the D2D transfer that CPU memory requests required in Meteor Lake and Arrow Lake. This avoids the extra transmitter, receiver, and link traversal, saving interface energy and latency. Panther Lake’s separate GPU still crosses a D2D link to reach DRAM, so its larger local caches also help contain package traffic. [1], [40] Smaller dies are less likely to contain a random fatal defect, and screening them before assembly prevents one bad tile from consuming a complete package of good silicon. Reuse also spreads design and qualification work across more products. Against those gains, Intel pays for the passive base, D2D circuits, extra bonding and test steps, and losses during assembly. Cost per working product across the portfolio captures the combined effect of wafer yield, reuse, test, and assembly. [29] Wildcat Lake packaging Intel launched Core Series 3, formerly Wildcat Lake, on 16 April 2026 for value mobile and edge systems. Wildcat Lake keeps 18A but removes the passive base and combines more functions on one die to simplify the package. The two products therefore reveal two distinct ways to commercialize the same leading-edge process. [41] Wildcat Lake’s 18A die combines up to two Cougar Cove P-cores, four Darkmont LP E-cores, two Xe3 cores and a smaller NPU. A separate platform-controller die supplies I/O, connected through UCIe, Intel’s first processor implementation of the standard. Consolidating graphics remove a tile boundary and the passive base, reducing assembly complexity for a modest-bandwidth value product. It also ties CPU and graphics scaling to the same die, giving up Panther Lake’s ability to swap in a much larger GPU. [42], [43] In July 2021, Intel CEO Pat Gelsinger set out an ambitious process roadmap aimed at regaining performance leadership by 2025, later described as five nodes in four years. Five years and one CEO later, Intel’s comeback story is not as unambiguously positive as Pat may have hoped. [44], [45] Intel once set the pace for process technology, bringing high-k metal gate technology and FinFETs into volume production years ahead of the rest of the industry. Its 22 nm FinFET process reached consumers with Ivy Bridge in 2012. [46] Intel’s integrated device manufacturing (IDM) model allowed its architects and process engineers to co-optimize products and processes. Starting with Sandy Bridge, Intel dominated x86, while AMD struggled with Bulldozer. That lead faltered at 14 nm and broke at 10 nm. Intel targeted a massive 2.7× density increase, but the node arrived years late and required several revisions before it could support Intel’s full lineup. This delay forced Intel to stretch 14 nm across six generations, while TSMC moved ahead in process technology and AMD recovered in x86. By 2019, Intel was still shipping 14 nm across most of its product stack, with its 10 nm client ramp focused on Ice Lake mobile processors. Meanwhile, TSMC was shipping N7 and N7+, and AMD’s Zen 2 compute chiplets used N7 to raise core counts and improve efficiency. Intel’s process failures were central to its decline, but unsound business decisions furthered their downward slide. Product delays compounded product mistakes, pushing client, server, and FPGA roadmaps off schedule. Several attempts to enter AI (Nervana and Gaudi) and networking (Tofino) also failed to establish lasting businesses. Intel’s recovery has focused on consumer CPUs and advanced packaging. Tiger Lake, Alder Lake, Lunar Lake and now Panther Lake have restored Intel’s consumer roadmap. On the process side, Intel 4 shipped with Meteor Lake, Intel 3 with Granite Rapids and Sierra Forest, and Intel 18A with Panther Lake. Intel has also made advanced packaging part of its foundry offering. However, Intel is still playing catch-up in servers. Several Xeon generations arrived years late and trailed contemporary AMD and Arm server CPUs in performance, efficiency, and core count. The process roadmap is back, but Intel does not hold the same process-technology leadership position it held prior to 10 nm. The introduction of gate-all-around nanosheets and backside power delivery are two of the biggest changes to transistor integration in a decade. Intel took on both changes at once: 18A paired its first RibbonFET with PowerVia in Panther Lake. Panther Lake is a substantial manufacturing milestone. Our cross-sections show how RibbonFET and PowerVia reshape local contacts and wiring, while the floorplans show where architectural consolidation and process choices save area. A sustained competitive lead depends on product performance, cost, yield, and the next implementation. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page.. [1] Intel, “Intel Tech Tour 2025 Panther Lake recap,” Doc. 866361, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/866361/ITT_2025_Panther_Lake_Recap1.pdf [2] Intel, “Core Ultra processors Series 3 datasheet, volume 1,” Doc. 872188-001, Jan. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/872188/872188-001.pdf [3] N. Horiguchi and E. Beyne, “Backside power delivery: How to power chips from the backside,” imec Reading Room, Nov. 25, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/how-power-chips-backside [4] W. Hafez et al., “Intel PowerVia technology: Backside power delivery for high density and high-performance computing,” in Proc. IEEE Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2023, pp. 1–2, doi: 10.23919/vlsitechnologyandcir57934.2023.10185208. [5] K. Fischer et al., “Intel 18A platform technology featuring RibbonFET (GAA) and PowerVia for advanced high-performance computing,” in Proc. Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2025, pp. 1–3, doi: 10.23919/vlsitechnologyandcir65189.2025.11075006. [6] K.-F. Cheng, C.-L. Teng, H.-Y. Huang, and H.-C. Chen, “Metal oxide composite as etch stop layer,” U.S. Patent 12 176 247 B2, Dec. 24, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12176247B2/en [7] S. W. King, “Dielectric barrier, etch stop, and metal capping materials for state of the art and beyond metal interconnects,” ECS J. Solid State Sci. Technol., vol. 4, no. 1, pp. N3029–N3047, 2015, doi: 10.1149/2.0051501jss. [8] A. V. Mule’, D. J. Towner, D. Seghete, C. R. Ryder, and A. A. Gonzalez, “Multi-layer etch stop layers for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20220102343 A1, Mar. 31, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20220102343A1/en [9] C.-C. Wang and J. H. Wang, “Interconnect structure with dielectric cap layer and etch stop layer stack,” U.S. Patent Appl. 20230253247 A1, Aug. 10, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20230253247A1/en [10] Y. J. Wu, K.-F. Cheng, C.-C. Lee, H.-K. Chang, and H.-Y. Huang, “Etch stop layer for interconnect structures,” U.S. Patent Appl. 20240332070 A1, Oct. 3, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240332070A1/en [11] M. G. Rainville, N. Shankar, K. S. Reddy, and D. M. Hausmann, “Deposition of aluminum oxide etch stop layers,” U.S. Patent Appl. 20180197770 A1, Jul. 12, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20180197770 [12] J. S. Leib et al., “Conductive lines having molybdenum liner and tungsten fill for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20240429126 A1, Dec. 26, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20240429126 [13] M. Naik, “Cobalt enables power and performance scaling at single-digit logic nodes,” Applied Materials, Dec. 17, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://www.appliedmaterials.com/us/en/blog/blog-posts/cobalt-enables-power-and-performance-scaling-at-single-digit-logic-nodes.html [14] Lam Research, “Breaking through AI’s invisible barrier with molybdenum,” Lam Research Newsroom, May 6, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://newsroom.lamresearch.com/molybdenum-metallization-ai-revolution [15] P. Yashar, G. Malyavanatham, and H. Vijwani, “Integrated circuit interconnect structures with niobium barrier materials,” U.S. Patent Appl. 20240112951 A1, Apr. 4, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240112951A1/en [16] Applied Materials, “Applied Materials unveils chip wiring innovations for more energy-efficient computing,” Applied Materials Investor Relations, Jul. 8, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://ir.appliedmaterials.com/news-releases/news-release-details/applied-materials-unveils-chip-wiring-innovations-more-energy [17] Samsung, “Samsung showcases AI-era vision and latest foundry technologies at SFF 2024,” Samsung Semiconductor, Jun. 13, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://semiconductor.samsung.com/news-events/news/samsung-showcases-ai-era-vision-and-latest-foundry-technologies-at-sff-2024/ [18] C. W. Yeung et al., “Channel geometry impact and narrow sheet effect of stacked nanosheet,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2018, pp. 28.6.1–28.6.4, doi: 10.1109/iedm.2018.8614608. [19] S. Mochizuki et al., “Evaluation of (110) versus (001) channel orientation for improved nFET/pFET device performance trade-off in gate-all-around nanosheet technology,” in Proc. Int. Electron Devices Meeting (IEDM), Dec. 2023, pp. 1–4, doi: 10.1109/iedm45741.2023.10413854. [20] D. G. Ouellette et al., “Fabrication of gate-all-around integrated circuit structures having molybdenum nitride metal gates and gate dielectrics with a dipole layer,” U.S. Patent 12 051 698 B2, Jul. 30, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12051698B2/en [21] imec, “Advancing the CFET-based device roadmap with novel integration modules and standard-cell architectures,” imec, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/advancing-cfet-based-device-roadmap-novel-integration-modules-and-standard-cell [22] A. Reznicek, X. Miao, C. Lee, and J. Zhang, “Wrap around contact for nanosheet source drain epitaxy,” U.S. Patent 11 302 813 B2, Apr. 12, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US11302813B2/en [23] J. A. Kittl, J. G. Hong, D. R. Palle, and M. S. Rodder, “Methods for varied strain on nano-scale field effect transistor devices,” U.S. Patent 9 978 833 B2, May 22, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9978833B2/en [24] S. Gandikota et al., “Method of reducing metal gate resistance for next generation NMOS device application,” Int. Patent Appl. WO 2024/137272 A1, Jun. 27, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/WO2024137272A1/en [25] J. Zhang et al., “Full bottom dielectric isolation to enable stacked nanosheet transistor for low power and high performance applications,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2019, pp. 11.6.1–11.6.4, doi: 10.1109/iedm19573.2019.8993490. [26] C. Yoo, J. Chang, Y. Seon, H. Kim, and J. Jeon, “Analysis of self-heating effects in multi-nanosheet FET considering bottom isolation and package options,” IEEE Trans. Electron Devices, vol. 69, no. 3, pp. 1524–1531, Mar. 2022, doi: 10.1109/ted.2022.3141327. [27] S. S. Pradhan, D. B. Bergstrom, J.-S. Chun, and J. Chiu, “Tungsten gates for non-planar transistors,” European Patent Appl. EP 3 506 367 A1, Jul. 3, 2019. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/EP3506367A1/en [28] L. Schloss and X. Ba, “Tungsten films having low fluorine content,” U.S. Patent 9 754 824 B2, Sep. 5, 2017. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9754824B2/en [29] Intel Foundry, “Accelerating AI and HPC with advanced process and packaging technologies,” Doc. 367370-001US, Jun. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-11/intel-foundry-hpc-ai-brief.pdf [30] M. Lofrano, X. Chang, H. Oprins, and Z. Tokei, “Mitigating the thermal bottleneck in advanced interconnects,” imec, Sep. 28, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/mitigating-thermal-bottleneck-advanced-interconnects [31] S. Bair, “Intel at ISSCC 2025: Navid Shahriari invited talk, eight papers, forums, panelist & product details,” Intel Community, Feb. 19, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://community.intel.com/t5/Blogs/Tech-Innovation/Edge-5G/Intel-at-ISSCC-2025-Navid-Shahriari-Invited-Talk-Eight-Papers/post/1667592 [32] D. Chandra, E. Potladhurthi, D. R. S. Reddy, and K. S. Rengarajan, “Tunable negative bitline write assist and boost attenuation circuit,” U.S. Patent Appl. 20160203857 A1, Jul. 14, 2016. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20160203857A1/en [33] Synopsys, “Advantages of firmware-based training in high-speed DDR IP,” Synopsys IP Technical Bulletin. Accessed: Sep. 14, 2026. [Online]. Available: https://www.synopsys.com/articles/firmware-based-training-ddr-ip.html [34] N. Muralimanohar, R. Balasubramonian, and N. P. Jouppi, “CACTI 6.0: A tool to understand large caches,” Hewlett-Packard Laboratories, 2009. Accessed: Sep. 14, 2026. [Online]. Available: https://users.cs.utah.edu/~rajeev/cacti6/cacti6-tr.pdf [35] Intel, “Intel Tech Tour 2024 Lunar Lake AI hardware accelerators,” Doc. 824436, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/824436/2024_Intel_Tech%20Tour%20TW_Lunar%20Lake%20AI%20Hardware%20Accelerators.pdf [36] Y.-H. Chen, J. Emer, and V. Sze, “Eyeriss: A spatial architecture for energy-efficient dataflow for convolutional neural networks,” in Proc. 43rd ACM/IEEE Annu. Int. Symp. Comput. Archit. (ISCA), Jun. 2016, pp. 367–379, doi: 10.1109/isca.2016.40. [37] Intel, “Introduction to the Xe-HPG architecture,” Doc. 758306, Nov. 4, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/developer/articles/technical/introduction-to-the-xe-hpg-architecture.html [38] Intel, “Core Ultra processors Series 3 for the edge,” Doc. 855291. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/855291/Intel%C2%AE%20Core%E2%84%A2%20Ultra%20Processors%20Series%203%20for%20Edge%20Overview_2.pdf [39] Intel Foundry, “Foveros technology brief,” Doc. 366411-001US, Feb. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-07/foveros-25d-product-brief.pdf [40] D. Das Sharma, “UCIe: Building an open chiplet ecosystem,” UCIe Consortium, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.uciexpress.org/_files/ugd/0c1418_c5970a68ab214ffc97fab16d11581449.pdf [41] Intel, “Intel launches Intel Core Series 3 processors,” Intel Newsroom, Apr. 16, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-launches-intel-core-series-3-processors-changing-the-game-for-everyday-computing.html [42] Intel, “Core Series 3 launch press deck,” Apr. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://download.intel.com/newsroom/2026/Intel-Core-Series-3/Intel-Core-Series-3-Launch-Press-Deck.pdf [43] Intel, “Intel outlines architectures for agentic AI at Hot Chips 2026,” Intel Newsroom, Aug. 24, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-outlines-architectures-for-agentic-ai-at-hot-chips-2026.html [44] Intel, “Intel accelerates process and packaging innovations,” Intel Investor Relations, Jul. 26, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/filings-reports/all-sec-filings/content/0001193125-21-224438/d199788dex991.htm [45] Intel, “Intel reports third-quarter 2021 financial results,” Intel Investor Relations, Oct. 21, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/1505/intel-reports-third-quarter-2021-financial-results [46] Intel, “3rd generation Intel Core processors bring exciting new experiences and fun to the PC,” Intel Investor Relations, Apr. 23, 2012. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/577/3rd-generation-intel-core-processors-bring-exciting
Reacts Survey Results: Jacksonville’s pass rush is still a problem
The Jaguars can’t get home with four pass rushers. Who could’ve guessed?!
Incredible stats on the Packers offensive line to start 2026
The Packers have a BIG offensive line problems. Some incredible stats showcasing the offensive line struggles.
Forget Politics. EVs Have An Age Problem
Republicans and Democrats are surprisingly aligned on EV buying intent. It's Boomers that are the problem.
Mark Gongloff: Private jets have a free-rider problem
If you try to take a free ride on, say, public transit in New York City, you’ll get in trouble with the law. If your mode of transportation is a
Lakers Insider Reveals Biggest Problem Entering This Season
The Los Angeles Lakers are hoping that the risky offseason of controversial moves will work out behind Luka Doncic as the top star. Losing talents like LeBron James, Rui Hachimura, and Luke Kennard is not a good thing for any NBA team. However, the Lakers decided to invest in younger talents that they believe fit […] The post Lakers Insider Reveals Biggest Problem Entering This Season appeared first on HEAVY.
Suspect in UPMC doctor’s stabbing death has criminal, mental health history in Florida
The man charged with fatally stabbing a UPMC doctor and critically injuring his wife during an attack in their Edgewood home had a documented history of mental health problems in Florida, where records show he attacked police and his girlfriend and ranted about vampires, aliens and a pharaoh. Elijah Hemingway,
Real Madrid star forced off with injury on international duty
La Liga giants Real Madrid have on Friday evening been dealt a potential blow on the personnel front. This comes after star goalscorer Kylian Mbappé picked up a fitness problem whilst on internationa...
Ebola cases, deaths in DR Congo outbreak near 7,900 and 3,800 as virus spreads to 2 more health zones
The high fatality rate, along with the large proportion of community deaths, highlights problems with timely case detection and healthcare access.
Cole Palmer: England boss Thomas Tuchel questions how desperate Chelsea forward is to play for Three Lions
Cole Palmer withdrew from England squad with a fitness problem for the second time since Thomas Tuchel took charge; Palmer has played three times for England under Tuchel; Follow England vs Spain on Sky Sports website and app on Saturday
The problem with drive-through halftime and postgame interviews
Has anyone anywhere ever seen an on-field interview with a coach and wished it had been longer?
Lionel Richie Has Big ‘American Idol’ News Amid Recent Health Issues
Lionel Richie has given fans a major update about his future on American Idol. The singer recently faced health problems that forced him to step away from some work. Now, he has confirmed that he plan...
‘Princess Diaries’ Star Heather Matarazzo Fears Losing Health Insurance Without New Role
Princess Diaries star Heather Matarazzo has admitted she fears she will lose her health insurance if she doesn’t land a new role soon. The 43-year-old highlighted a problem facing actors while talking...
Quick hitters: O-line health, safety depth and Dan Campbell’s first days in Detroit with Glenn
Allen Park — Detroit Lions coach Dan Campbell and quarterbacks coach Mark Brunell met with the media on Friday. Here are the noteworthy items from those conversations. Healthier up front, banged up in the back It’s good news, bad news on the injury front. First, the offensive line is going to be far closer to full strength with starters Blake Miller (knee) and Christian Mahogany (hip) on track to return to the lineup. That provides stability the offense lacked against Buffalo, particularly at right tackle, where backup Larry Borom allowed 11 quarterback pressures and committed a trio of penalties. Subscribe However, with that same unit, veteran Ben Bartch (foot) is likely to miss Sunday’s matchup with the Jets. The left guard competition that’s been ongoing since May has effectively been whichever option is healthy that week. In the back end, safety Thomas Harper (ankle) is also unlikely to be available on Sunday. That leaves the team precariously thin at the position following Avonte Maddox going on injured reserve this week. Christian Izien is expected to get the start alongside Chuck Clark. “Izzy's been working a lot back there and had a full week,” Campbell said. “And he's gotten a ton of work this week, a ton of reps, full-speed reps. ‘This is what you're going to do, this is the calls’ and just dousing him with full-speed reps and he's done a good job this week.” Safety depth is the bigger concern. The team is expected to count on some combination of Jalen Mills, who signed to the practice squad on Monday, Bishop Fitzgerald, the undrafted rookie poached off the Steelers’ practice squad on Tuesday, and rookie cornerback Keith Abney, who doesn’t have experience at safety. “I'll say this about Abney, man, for a rookie, he's a pretty dang smart, conscientious, aware football player that's got a ton of room to really take off,” Campbell said. “…He's young. He's another one, he just needs reps and reps. But, if we need it, that'll be a guy who may have to go in for us.” You can check here for the full injury report, with game designations, later this afternoon. Reflecting on the past Responding to comments made by Jets coach Aaron Glenn this week, Campbell reflected on his earliest days with the Lions, before the coaching staff had been fleshed out and it was just he and Glenn at the facility working through what they wanted things to look like. “It was just he and I in the lab,” Campbell said. The coach said the two would fill the whiteboard that remains in current coordinator Kelvin Sheppard’s office top to bottom with notes about philosophy, coaching style, team identity and the type of players they wanted to target. “He looks different than me,” Campbell said. “I'm taller, I'm whatever. He's quicker. All these different things, man, but we're really the same. I mean we're so much the same. And he's the defensive version, I'm the offensive version. He was my right hand man. …It was fun, man. Those were good days.” Campbell said it was one of the best and worst days of his life when the Jets hired Glenn to be their coach. “AG means the world to me,” Campbell said. “He's one of my dearest friends because I know what he's made of. “…It's because you know you're losing a little piece of you. That's what he meant to me and to us. So, that's hard.” Traits under center A couple of weeks back, Sheppard noted that Brunell had identified Saints quarterback Tyler Shough as the best prospect at the position ahead of the 2025 draft. On Friday, Brunell confirmed his evaluation and explained what he looks for when studying a young quarterback. Here’s the full answer: “Young quarterbacks, you have to look at everything, you know? I look at guys coming out of college just like I look at any free agents that we might be looking at, or guys that we might add to our roster. Do they take care of the ball? Are they on time? How is their decision-making? How are their feet? “It's tough because you look at a college player, you don't understand what they're trying to do offensively, what their reads are, but you can identify when a guy is accurate, obviously, and when the ball's getting there on time. If there are a lot of interceptions, it raises a red flag. And I think with a lot of the spread offenses of what you're seeing, when you see a young player and they're running some pro concepts and he's having to make protection calls, and he's getting the right play out of the run game, and when there's a lot on his plate and he's executing it very well, and he's managing all of that, that really jumps out at you. It’s really hard to find. “That's one thing we saw with Luke Altmeyer. He had a lot of experience. We call it, ‘Hey, he's playing quarterback.’ And what does that mean? It's not just completing passes. It's getting guys lined up, getting the right play, getting the protection call right, just fixing some problems, being able to progress (through reads). And there's still some young guys out there that can do that at a high level, which is good to see.” Regarding Altmyer, who competed for the team’s backup job through the offseason and currently resides on the practice squad, Brunell acknowledged physical development slows once the season starts, because there aren’t reps to go around. However, there’s still extensive mental development that’s ongoing. “The key for him is approach the game as if you're the starter, mentally,” Brunell said. “And that's really all you can do. Approach the game as if you're the starter and be good in the (class)room. You come in alongside Jared (Goff), and you come in alongside Josh (Dobbs) and (do) whatever they need. And if you get an opportunity to talk to Luke, he'll tell you he does have a lot of responsibilities besides just getting donuts for us on Saturday. “For him, it's mentally staying focused, and even though there's really no chance this Sunday of him playing, he has to approach it as if he's taking the first snap and playing the whole game. So what's our game plan? What are our checks? What are we anticipating? And then during the game, we keep him involved as far as looking at coverages and pressures. And so, really, for him, it's just a mental game. And for now, that's all we can do.” Reason for more zone The Lions have significantly increased their usage of zone coverage on defense this season. I asked Campbell if that was a reaction to their personnel or driven by the focus to generate more turnovers, given it can be easier to produce interceptions when you can keep eyes on the quarterback while playing zone. “I think it was a little bit of both,” Campbell said. “We just felt like this would suit us a little bit better up to this point, and then be disruptive and get takeaways, which worked well Week 1. We had two (opportunities) last week against Buffalo we weren’t able to get, but they’re there.” I followed up by asking how much the combination of heavy blitzing with the back end playing zone has contributed to some of the early-season coverage woes, since adding extra players to the pass rush means leaving the coverage short-staffed. “I mean, it’s challenging, and that’s why a lot of the things we’ve done in zone, for the most part, have been to reduce that stress level back there,” Campbell said. “But that also requires the front getting there. And if you don’t get there, we already kind of talked about that, but there (has to be) a trust there.” The alternative, Campbell explained is sending four and it taking longer for the rush to get home, which can create different problems for a defense. “You can bleed yards,” Campbell said about the strategy. “It gets a little longer and it’s dink-and-dunk and run after catch. …So, we do what we think is right by what we feel like our personnel (does well). But also the game plan, who you’re going in to play, the matchups, their offense. “We’re not stuck on one way.” Detroit Football Network is a reader-supported publication. To receive new posts and support my work, consider becoming a free or paid subscriber. Subscribe
How the Illinois Offense Can Give Ohio State Problems
Quarterback Katin Houser leads a ball-control strategy designed to neutralize the Buckeyes' pass rush and keep their explosive offense anchored to the sideline through sustained drives.
Sarkisian expecting communication issues with Trump attending Tennessee game
Apart from the extra security measures, Sarkisian is anticipating problems communicating with his team.
New Orleans’ Section 8 housing has ‘life-threatening’ problems, HUD inspector finds
New Orleans' public housing authority failed last year to fix electrical hazards, inoperable windows, and other life-threatening problems in its subsidized apartments, federal regulators said.
AI Presents Science with a ‘Ship of Theseus’ Problem
Opinion | AI can replace each part of the scientific process, leaving the enterprise recognizable but devoid of human judgment.
Gasperini schedules team dinner
Gian Piero Gasperini has granted four days of rest to the players who remained at Trigoria: from Svilar to Malen, who is recovering from knee problems. Their return to the field is scheduled for Tuesd...
Jürgen Klopp Confirms Kai Havertz Scan After Germany Injury
The Arsenal forward was forced off during Germany's draw with the Netherlands, with Jürgen Klopp confirming a muscular problem and further checks.
Historic downtown building in disrepair causing problems for Wichita business owner
The Wichita Police Department says it has responded 54 times to her property since the beginning of the year -- 30 of those responses were initiated by a 911 call.
Column: Politics has become a battle for attention
Democracy requires us to disagree and still live, work and solve problems together, government communications strategist Kellen R. Reed writes in a guest column.
Column: Politics has become a battle for attention
Democracy requires us to disagree and still live, work and solve problems together, government communications strategist Kellen R. Reed writes in a guest column.
Who Replaces Labaron Philon Jr for Alabama Basketball
Alabama basketball faces a major offensive problem with the loss of Labaron Philon Jr. Despite testing the NBA waters his freshman year, Philon Jr. decided to return to Alabama. In his sophomore year, Philon took a massive step in his game, becoming more than just a good defender and decent scorer. Last season, he averaged …
FSU’s Mike Norvell Has a ‘No Win’ Situation This Saturday
Mike Norvell is in a no-win spot at Florida State: blow teams out and they stink; win close and FSU has problems. Only consistency changes it.
🤕 Second Germany star off injured: Bundesliga gem makes debut
Germany’s Nations League performance in the Netherlands has so far been anything but going to plan.After Jamal Musiala was already forced to miss the match at short notice due to thigh problems, new...
A horse named 'Austrian Painter' with a disturbing backstory exposed a glaring problem in horse racing
The Jockey Club may need to overhaul its name-approval process after a controversial horse won a race.
Fleets urged to build AI strategy around data, business value
Fleets looking to deploy AI should focus on clean, accessible data and defined business problems, not the latest technology pitch, panelists said at The AI Summit.
This Overlooked Infrastructure Problem Can Break a Growing Business. Here's How to Prevent It.
Here's what happens when growth outpaces the systems built to support it.
Jared Goff Isn’t the Lions’ Problem. The Defense Is.
Jared Goff is taking the blame in Detroit, and the numbers point somewhere else entirely #Lions
Enterprise AI Wants Your Most Sensitive Data. VAST Says It Can Keep It Safe
Enterprises have plenty of data they would like to use with AI. The problem is that some of their most valuable data is also the hardest to use. Think of all the customer records, financial information, internal research and other sensitive data that can’t always be sent to an outside AI service. There is another […]
Ken Rosenthal Exposes the Biggest Problem Facing the Cincinnati Reds
Internal dysfunction and meddling ownership have paralyzed Cincinnati’s front office, preventing the strategic rebuilding needed to replicate the Brewers' and Rays' small-market success.
Scientific American Starts Sober but Quickly Relapses
A proposal by University of Washington planetary scientist David Catling addresses what origin-of-life researchers call the phosphate problem.
Raiders have 1st-world problem developing at CB
The Las Vegas Raiders have a first-world problem developing at cornerback. It's a good sign.
Blue Light Doesn’t Actually Fry Your Eyes. The Real Problem Is Much Stranger.
A dark-room experiment reveals why blue blurs the world, and why darker eyes handle it better.
Is metascience being co-opted?
In July, the White House released a report that argued academia is deeply dysfunctional and in need of radical reform.Science: A New Golden Age sets out a litany of problems many academics will recognise: interminable waits for grants; short-term funding rather than support for longer, more ambitious projects; ballooning administrative requirements; pressure to publish, and many more. “The scientific machine is getting bogged down,” it says. At least on the face of it, Science: A New Golden Age is a triumph for the metascience movement, a loose-knit, global group of academics, philanthropists and think tankers that want far more testing and experimentation in how we fund public research and innovation. The report tells US research funders to set up internal metascience units to do just this. But it has also set alarm bells ringing that metascience is being conveniently deployed to help justify the defunding of US universities, which US vice president JD Vance has openly labelled “the enemy.” “Just because you have an issue with your plumbing in your house doesn't mean you light the entire house on fire and burn it to the ground,” said Colette Delawalla, chief executive of Stand Up for Science, a group campaigning against what it says are attacks on scientists by the Trump administration. No one is arguing that academia doesn’t need reform, but there’s debate over how far and how fast the system should be shaken up. Does public R&D need slow and steady evidence-based adjustment, or radical new experiments?One of the key arguments in Science: A New Golden Age is that there’s not enough funding for what it calls “mid-level” science: engineering-heavy projects that require tens of millions of dollars, involve ten to a hundred people, and last around five years. Such a project might develop a brain-computer interface for people with Alzheimer's disease, for example. As such, the US National Science Foundation (NSF) has already announced $1.5 billion to set up so-called X-Labs, effectively new research organisations to pursue breakthroughs in areas such as quantum sensing and new scientific instruments. Funding divertedBut there’s a catch: this money has squeezed NSF budgets for more traditional, fundamental research grants, Science reported in June, likely meaning less cash for university-based scientists. Science: A New Golden Age also makes various swipes at universities, accusing them of extracting overheads from scientists to fund administrative bloat. “We have become dependent on a narrow set of legacy institutions,” it says. The report doesn’t mention it, but the US government is simultaneously seeking greater powers over federal funding, which would allow political appointees at funding agencies to screen or cancel research grants mid-project. The White House is also seeking to slash the NSF’s budget by more than half in 2027, although similar cuts proposed for 2026 were blocked by Congress. Convenient hookThis has worried some that the metascience agenda could be misused as a kind of smokescreen to further weaken universities. James Wilsdon, executive director of the Research on Research Institute at University College London, said that the report contains lots of “interesting ideas” and agrees that in places, academia is a “pretty broken system.” But the risk is that metascience is being deployed as a “convenient hook” to support cuts and a “political land grab” to transfer grant power from scientists to political appointees in US funding agencies.So far, the metascience agenda hasn’t been seized on by radical right parties in Europe. But Wilsdon worries it will cross the Atlantic, politicising research reform efforts and making them more difficult to carry out. The report is already making some in Europe sceptical of the entire idea. “The system is not without flaws, but the metascience discussion is not likely to improve the system but rather to generate munition to undermine it,” said Claes de Vreese, a professor of AI and society at the University of Amsterdam. Peter Thiel protégéOfficially, Science: A New Golden Age has just one named author: Michael Kratsios, the director of the Office of Science and Technology Policy and a former chief of staff to Silicon Valley mogul Peter Thiel. He also served as chief financial officer of Thiel’s Clarium Capital Management. Since the 1990s, Thiel has criticised US universities for moving away from teaching what he views as the classic works of western civilisation, and drifting towards “anti-Western zealotry.” And since 2011, he has offered two-year fellowships of $250,000 to young people to skip or drop out of university, and instead start companies or pursue scientific research. “College can be good for learning about what’s been done before, but it can also discourage you from doing something new,” according to the Thiel Fellowships website. In other areas, the Trump administration has promoted academics with a longstanding interest in metascience. For example, the head of the National Institutes of Health, Jay Bhattacharya, in 2020 co-authored a study arguing the funder backs overly conservative proposals, although he achieved wider prominence as a critic of pandemic lockdowns. Careless talk costs fundingEven before the Trump administration embraced the metascience agenda, some metascientists privately wondered whether they should be careful not to overstate dysfunctions in academia, in case this gets used as ammunition against universities. But others think being cautious with criticism is pointless. After all, last year, the Trump administration sought to cut funding from US universities on an entirely different premise: supposed antisemitism on campus. “I don't think these governments need a technical metascientific excuse to attack the universities, they will want to do so anyway,” said Will Stone, a researcher at Science Works, a new think tank advocating for a “metascience revolution” in the UK. “I think researchers should report what they find, even when the findings may be used to advance policies they disagree with,” echoed Russell Funk, a researcher at the University of Minnesota, who in 2023 co-authored a highly influential paper that argued scientific papers were becoming less disruptive over time. No justificationThat said, Funk thinks that metascientific research certainly doesn’t justify a weakening of universities. Instead, scientists need “time, resources and stability to pursue unfamiliar ideas,” he said. “Taking away those conditions works against the very goal the reforms are supposed to achieve.”The Institute for Progress, a Washington DC-based innovation policy think tank that has championed X-Labs and metascience units, also says that reforms should complement, not supplant, universities. “Unpredictable, unreliable, and reduced federal funding to researchers is destabilising to the very foundations of research and development and is bad,” said Jenn Gustetic, the institute’s director of metascience and R&D policy.Evolution or revolution?This points to a much bigger divide in the metascience community: how far and how fast should public R&D be shaken up? Does it need evolution or revolution? For example, Science: A New Golden Age says the science system relies too heavily on traditional “workhorse” project grants, the type that pay out around $250,000 a year to fund “hypothesis-driven science by small teams on tractable questions.” However, in criticising project grants, the report “decisively picks one side of a debate that is far from settled,” David Hilmer Rex, a metascientist based in Denmark, has written. In June, Pierre Azoulay, a metascientist at the Massachusetts Institute of Technology, defended project grants, saying that the alternative of X-Labs “merits scepticism.”A-B testingOne challenge in metascience is that it’s easier to generate evidence for some types of change than others. Most straightforwardly, research funders can run A-B tests on different ways of awarding money. For example, Germany’s Volkswagen Foundation recently trialled distributed peer review, where applicants rate each other’s proposals, and measured its results against traditional review panels. Distributed peer review made quicker decisions, although awarded money to largely different ideas. However, much of the focus of the metascience movement has been on founding fast-moving and free-acting new research organisations and funders, in contrast to the alleged stodginess of mainstream academia or public innovation grants. A culture of speed and freedom are the animating principles behind Germany’s Sprind or the UK’s Advanced Research and Invention Agency (Aria).Related articlesViewpoint: it's time to experiment with how Europe funds science European researchers sound the alarm that Trump rule changes will hit cooperationHowever, while it’s possible to closely study previously successful bodies, such as the US Defense Advanced Research Projects Agency (Darpa), for historical clues to their secret sauce, it’s impossible to guarantee in advance that the likes of Sprind or Aria will actually work as hoped. But advocates of new organisations say this inherent uncertainly shouldn’t stop us trying. “If we wait for definitive proof that something will work before we try it, I don't know where your proof is coming from,” said Stone. Trade-offsUp until now, experiments in metascience haven’t generally come with hard trade-offs over money. In the US, new ideas such as focused research organisations have often been funded by billionaire philanthropists. In Europe, new innovation agencies such as Sprind and Aria, or the Netherland’s new National Agency for Disruptive Innovation, haven’t needed explicit cuts elsewhere in the research system. But with the $1.5 billion establishment of X-Labs by the NSF, the trade-offs are becoming clearer. Some metascientists privately wonder whether a smaller pilot would have been more appropriate, given that the idea is untested. The Institute for Progress counters that the $1.5 billion X-Labs budget is spread out over a decade, so will account for less than 2% of the NSF’s annual budget. “It’s important to remember that [Darpa] was once an institutional experiment as well. Now it’s one of the most cited innovative funding models in the world,” said Gustetic.As for Europe?The US isn’t the only country placing metascience at the heart of its research strategy. Science: A New Golden Age looks admiringly at the UK, which in 2024 set up a Metascience Unit to scrutinise how it funds research. In Brussels, it’s more of a mixed picture. In 2018, the EU set up the European Innovation Council to funnel grants and equity to start-ups, although it’s sometimes criticised for awarding money too slowly. Recently, the council has started experimenting with challenges, where teams of inventors compete to overcome a technological challenge. The European Commission also wants to experiment with partially randomising grant winners, to cut down on bureaucracy. However, the Commission’s own advisers have said the EU’s own research schemes are too conventional. They want the Commission to establish a new dedicated unit to scrutinise and experiment with funding. But there’s no sign of a such unit emerging in Brussels’ plans for the next Horizon Europe programme, which from 2028 is set to distribute more than €160 billion over seven years. Sam Bogerd, director of breakthrough innovation at the Brussels-based Arq Foundation, an AI-focused think tank that also looks at metascience, says that Europe might have the opposite problem to the US: universities and basic research funding are still reasonably well supported, but there’s not enough experimentation. “We're not taking a close enough look at where this money can achieve the most, and I am worried that the good ideas around metascience will be tainted politically by their association with the Trump administration,” he said. He’s still lobbying for the Commission to set up an experimental unit. But in the meantime, the Arq Foundation plans to do its own research, and is currently hiring two metascience researchers to run the rule over how Brussels spends research funding.
Struggling Lesbian Bar Drops Saturday Mask Rule — and Its Business Problem Gets Worse
A struggling Massachusetts lesbian bar made one night a week mask-optional in hopes of attracting more customers. Instead, the change unleashed hundreds of angry comments, boycott calls and even a com...
Hands-on science can be cool
After spending many long days conducting experiments to find a new way to combat bacterial infections in crops, Misha Hegde and Mia Soleil Maurer have been rewarded with international recognition and access to top research facilities. But these are not typical scientists. They are 16-year-old German high school students.“Our supervisor told us that in order to start a project, you need to begin with either a question or a problem,” says Misha, adding that she and Mia had read about antibiotic resistance in certain plants being treated for bacterial infections. “We found out that antibiotics overuse is very common in agriculture,” explains Mia. “Our aim was to create an alternative to antibiotics and to try to raise awareness of the problem of overusing antibiotics.”Their subsequent research has focused on harnessing bacteriophages, the natural predators of bacteria, to eliminate pathogens threatening food crops treated with antibiotics. At the Schuldorf Bergstraße Jugend forscht MakerLab in Seeheim-Jugenheim, located in the German state of Hesse, they discovered a novel phage that infects the Rhizobium rhizogenes bacterium, which causes the hairy root disease that can reduce yields of tomatoes, carrots, soya beans and other food staples.The students believe their method could curb antibiotic use, while protecting plants from infections without disturbing the natural soil microbiome. “The application of phages is host-specific, so they would only kill the targeted pathogen or disease-causing bacteria,” explains Mia. It may also offer environmental benefits, since applying antibiotics can contaminate groundwater.Getting to this point has not been easy. The childhood friends admit to feeling frustrated when their trials did not yield the expected results. “We spent six months on our first experiment, just doing the same thing over and over and over again, to the point where we thought, is it even worth it? Why are we doing this?” Misha says. “You just need to be brave enough to take that first step and keep going.”The benefits of inquiry-based learningTheir determination has paid off. In 2025, the pair won first prize in biology at Jugend forscht, Germany’s national competition for young people interested in science, technology, engineering and mathematics. They were also among the winners of the German Research Foundation Europa-Preis, which is awarded to selected national winners at Jugend forscht, and took third place in the 2025 European Union Contest for Young Scientists.The Jugend forscht Foundation opens doors for young people to connect with scientists as well as industry professionals. Jessica Bönsch, executive director of the Foundation, sees Misha and Mia as prime examples of how young people can develop a deeper understanding of science through their own research projects. “The experience of working on your own research question is very important,” she explains, adding that “inquiry-based learning engages with real-life problems in a way that can be more motivating than traditional classroom teaching.”The Jugend forscht Foundation offers financial support through sponsor pools in Germany’s federal states. Some projects are developed in cooperation with student research centres, university labs or informal collaborative learning areas called makerspaces. Other activities start as hands-on “garage projects” and can grow within the Jugend forscht network and infrastructure.The Jugend forscht Foundation is also a partner of Science Comes to Town, an EU initiative to strengthen public awareness about science and create bridges between researchers and communities. The EU-financed project involves universities, research institutions and other stakeholders in three host cities — Brest (France), Kiel (Germany) and Split (Croatia).“It's so important for people not to live in a bubble, because I think science can be very scary if you misunderstand it,” Mia says of SCTT. The initiative’s aim of raising awareness about science is “absolutely amazing,” Misha adds. “I think it's the best way to kind of make science digestible for the public. In a world where misinformation in science is getting more radical, more dangerous, becoming more of a threat to the trust in scientific infrastructure and foundations, we need such programmes.”Misha and Mia also believe that SCTT can help break down gender stereotypes in science by encouraging young women to study and pursue careers in scientific fields. Both students have benefited from female mentors and encouragement they had when they were much younger. Mia’s love of science began with a class trip to a lab, while Misha — with a smile on her face — says she wanted to study history until “a teacher kind of coerced me into joining a school science club.”Recognition beyond EuropeIn May, Misha and Mia were among the finalists at the Regeneron International Science and Engineering Fair held in Phoenix, Arizona, and involving nearly 1,700 pre-university students from over 60 countries. “It was very crazy because there were so many people and so many teenagers interested in science,” Mia recalls. The event was also challenging. “It was eight hours of continuously presenting your project,” adds Misha.Attending the fair was a chance for the young women to see first-hand the value of international collaboration as well as how research cultures differ. “America is a bit more willing to take risks, and I think that's something we can learn about here in Europe,” Misha explains. However, she continues, “I think Europe has the talent, has the innovation and has the resources” to be competitive.Misha and Mia plan to continue their phage experiments in the new school year, inspired by the project’s hands-on nature and the support they receive from their supervisors. They have also attracted the interest of professional scientists and received invitations to leading research facilities, including the Centre for Synthetic Microbiology, jointly run by the University of Marburg and the Max Planck Institute for Terrestrial Microbiology in Germany. “It is so cool that we can do something to try to move the world in our school and at this age,” Mia says.After completing secondary school, Mia plans to study microbiology and pursue a career in medical research, focusing on Ebola and other infectious diseases. “This has been my dream for so long,” she says. Her friend Misha is interested in biological research with a focus on medicine. “I've gotten addicted to the process of going to the lab, planning out experiments, then failing, trying again,” Misha says. “I think there's just so much to be discovered, so much to be done.”The students' names and photos were published with the permission of their parents.Science|Business, which connects policymakers, academics and industry through its news reporting, analysis and events, is an SCTT partner.
Where problems are solved: Get to know the new Interdisciplinary Science and Engineering Building at Case Western Reserve University | CWRU Newsroom
This story is the first in a series introducing the research, people and building that will define Case Western Reserve’s next chapter of discovery....
Scientific Papers Can Now Become AI Agents
There are millions of scientific research papers that include tons of information. Of course, not all that information is valuable, but buried across those papers are experiments, datasets, methods and software that could help researchers answer new questions. The problem is that no scientist can possibly read and make use of more than a small […]
Teen mental health problems rise, with sharper increase among girls than boys
In the first survey period (2007–2008), around 10% of girls were above the threshold for clinically significant mental health problems. In the second survey period (2024–2025), the corresponding figure ...