SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " evolution " 913 found 🔀 AI-powered Shuffle
Is Mega Skarmory good for Pokémon GO Raids?
Super Mega Skarmory Raid Day brings one of the new Legends: Z-A Mega Evolutions to Pokémon GO, and gives the undeniably cool Skarmory a new lease of life in the Raids meta. A popular / type from Gen 2, Skarmory has been a staple in the Little and Great League formats, but has never made […]
Making Our Own Luck
We are cross-posting a piece that former NIH official Kris Willis wrote for Macroscience. Kris is now the President and Founder of the Woodley Park Institute, for which I’m a board member. Picking winners or hedging bets? Federal science agencies have long wrestled with the question of how to ensure their billions of dollars of grants and contracts result in maximum benefits for Americans. On the surface, it might seem that a goal-oriented, interventionist style of management would be the best policy: prioritize our most pressing problems and distribute funding accordingly.This top-down strategy creates a unique hazard, though: bad choices can send resources in the wrong direction, resulting in slow progress that impedes the delivery of tangible benefits to citizens. Moreover, if decision makers pursue an applied advance when the underlying scientific principles remain poorly understood, they risk costly failures and a loss of support for the research enterprise at large. Examples include Nixon’s 1971 War on Cancer, undertaken on the premise that a cure could be achieved in less than a decade, the drive to build an operational commercial fusion plant by the mid-1990s, and the National Plan to Address Alzheimer’s Disease, which failed to produce the effective treatments and prevention strategies promised by 2025. The contrasting laissez-faire approach is to hedge your bets. If the path to an advance is impossible to predict, then the wisest choice might be to distribute funding to as widely as possible. The main risk of this strategy is that spreading funding thinly may limit the resources available to the most promising research, resulting in the same negative outcomes as the interventionist approach: limited support for the most promising topics, slow progress, and delayed returns. In reality, at science agencies like the National Science Foundation and National Institutes of Health, program managers navigate between these two extremes, setting some funds aside to target high-priority areas and using the rest to cover the widest possible range of meritorious proposals. This middle path seems like the most rational way to proceed, but it still requires making choices. How much should be set aside for high priority topics? What should those topics be? How should we define merit? Expert opinion can provide a helpful guide, but leading experts can have remarkably different opinions about what matters and what should be prioritized. Moreover, experts and administrators alike can be risk averse, giving an edge to high-profile, well-established concepts. What’s really needed is a data-driven framework to help guide decision-making, one that doesn’t simply repackage prestige or incumbency. Recognizing breakthroughs years in advance Many breakthroughs fail to attract funding or recognition at the earliest stages of development. Katalin Karikó, for example, spent years struggling to win grants for work on mRNA that would eventually win her and Drew Weissman a Nobel Prize. Similar stories can be told about Jim Allison’s groundbreaking studies leading to the development of cancer immunotherapy, Stan Pruisner’s demonstration that prions can self-replicate without DNA, or Robin Warren and Barry Marshall’s proof that Helicobacter pylori, not stress, causes ulcers. Yet at some point, the scientific community recognizes and responds to transformative breakthroughs like these. How does that change happen? And what if science funders could identify the areas that are on the cusp of a breakthrough? Those questions led my collaborators and me to study how scientists responded to past breakthroughs. Based on patterns in that data, we developed a means of predicting future breakthroughs, using biomedicine as a proof of concept. It’s worth taking a moment to describe how our approach works. Briefly, our prediction process begins by grouping the 18 million or so peer-reviewed papers in PubMed, the authoritative database of biomedical research, into roughly 50,000 unique topics. A small subset of these topics are so widely acclaimed as breakthroughs that they have been recognized with a major prize like a Nobel or a Lasker Award. We theorized that studying the development of these outliers over time, especially before they gained acclaim, was the key to identifying future instances of them. After defining topics, we chose 21 representative breakthroughs and asked what they looked like before they won prestigious prizes. To answer that question, we re-ran our topic-mapping algorithm repeatedly, winding back the clock one year each time, stringing together the years to follow the progress of each field as it grew and advanced. We found that in each case, the years leading up to a discovery followed a pattern: a burst of papers on a new, rapidly evolving topic, many of which quickly became influential. These characteristics—the percent of papers that are new, the percentage of papers that are brought in from other topics, and the influence of each individual paper—can all be measured separately for any given topic. Together, they act as a predictive signal that is detectable an average of five years before a transformative discovery is made, and up to thirty years before the discovery receives a major prize. Scanning the current research landscape for topics that display this signal allows us to predict what work will likely produce a future breakthrough. Each year we analyzed includes four or five signals, a number that appears to have remained constant across a twenty year time frame. In their classic work on the sociology of science, Bruno Latour and Steve Woolgar established that the desire to participate in a major discovery is an important motivator for scientists as they consider whether they should take up (or abandon) a research problem. Although further work is needed, the simplest explanation for our results is that this behavior is widespread enough to detect at scale. A foundational advance, or something like it, draws the attention of scientists and causes them to change the direction of their research. They vote with their feet, staking their own reputation and careers by publishing on and citing the new idea. That upswell of interest is the foundation of our breakthrough signal. What kind of research does our model identify as a breakthrough? After building a model based on the patterns in our 21 preselected breakthroughs, we tested it by identifying all early signals of discovery from 1994 through 1997. Of the 18 signals we found in that time period, 17 can be traced forward in time to a breakthrough. Examples include super-resolution fluorescence microscopy (see the image above), the directed evolution of proteins and enzymes (Chemistry Nobel, 2018), and sequencing the human genome (National Medal of Science, 2008). The discovery of the role of leptin signaling in obesity is a particularly interesting case study. Around 1950, scientists noticed the existence of a type of lab mouse that suffered from a unique inherited form of obesity. When given the freedom to choose their own diet, these mice ate more than normal and preferred food that was high in fat. Researchers had few clues as to why the animals overate; early experiments pointed to the existence of a soluble ob factor found circulating in the bloodstream that regulated appetite, but its identity was unknown. In 1994, Jeffrey Friedman and colleagues identified and sequenced the ob gene, noting that the protein it encoded appeared to fit the profile of a circulating factor. A year later, a trio of high-profile publications demonstrated that ob was a hormone that regulated body weight and fat deposition by regulating appetite. One of these was co-authored by Friedman, who christened it leptin from the ancient Greek word for thin. Using our model, the data from 1996 make it clear this advance would become a breakthrough. Scientists had flocked to study the biology of the new hormone, generating the flurry of new papers and citations required to produce a signal. One of these demonstrated that serum leptin concentrations reflected the amount of adipose tissue in the human body, providing clinical validation of the earlier mouse studies. Before the identification of leptin, scientists were unable to point to a specific molecule that controlled appetite and adiposity, so that it was impossible to rule out non-physiological causes of obesity; its characterization fundamentally changed our concept of weight gain. In 2010, Friedman and fellow pioneer Douglas Coleman were awarded a Lasker for the discovery. Our work also identifies breakthroughs in clinical practice and behavioral and social sciences, even though these areas are less likely to draw the attention of major prize committees. One example that falls into this category is the introduction of endovascular aneurysm repair, a minimally invasive surgical procedure for the treatment of abdominal aortic aneurysm, a leading cause of death among Americans over the age of 65. Relative to the previous standard of care, it reduces in-hospital mortality by almost four-fold. In 2017, Timothy Chuter received the American College of Surgeons’ prestigious Jacobsen Innovation award for his multiple refinements to the technique. Another under-recognized breakthrough identified by our model is the development of standardized survey instruments to assess the quality of life for HIV+ patients. The antiretroviral cocktails introduced in the mid-1990s reduced AIDS mortality, but treatment came with serious side effects. The new evaluations showed that patients whose disease progressed had worse physical functioning than Americans with other chronic diseases, while those who were asymptomatic maintained a health-related quality of life on par with the overall US population. This evidence made it possible for patients and activists to argue that even in the absence of a total cure, and in spite of the side effects, alleviation of symptoms was a worthwhile priority for clinicians. My colleagues and I have failed to identify any significant recognition for the physicians and health policy experts who pioneered this advance, although in 2016, researchers called for the World Health Organization to set targets for good health-related quality of life as part of its framework to end the AIDS pandemic. From forecasting to funding How should science funders use our predictions? Any serious discussion of what we should do with this new capability needs to begin with an understanding of its limitations. We can’t (and shouldn’t) invest all of our resources in the small number of topics predicted to produce breakthroughs. Innovative new fields are born from existing ones; they rarely arise de novo. If funders don’t maintain a diverse portfolio, the breakthroughs of tomorrow will have no antecedents. Think of this as eating the seed corn, or killing the goose that lays the golden egg. There are also multiple goals of funding beyond basic scientific discovery, including translating discoveries into clinical practice, developing new technologies, supporting economic development, and training new scientists. The investments needed to accomplish these goals are likely different from those required to support emerging breakthroughs. Finally, we must be aware that we may not capture every instance of a breakthrough. The concept is fuzzy, and not every significant discovery is recognized with a major award. Further, breakthroughs are rare, meaning that our dataset is, by necessity, small. This makes formal estimates of accuracy challenging. Although our overall success rate appears to be high, any one signal may turn out to be a false positive. We found one apparent example: the development of the third generation COX-2 inhibitors, Vioxx and Celebrex, which were much celebrated in the early 2000s as effective but non-addictive pain relievers, meets all the algorithmic criteria of a breakthrough. Five years after it received FDA approval, researchers demonstrated that Vioxx was associated with serious cardiovascular complications, and the manufacturer voluntarily pulled the drug from the market. Celebrex remains available, although like other NSAIDs, it carries an FDA warning for increased cardiovascular risk. Decision makers who were overly focused on the breakthrough potential of this research might have wasted substantial resources nurturing an area that ultimately proved to be a failure—but so would those who relied on expert opinion at the time. That said, the potential benefits of funding the next mRNA vaccine or cancer immunotherapy years earlier than we might have are large. When we can’t assume the outcome of an action, it’s worth conducting an experiment. Can targeted support for areas that are poised to produce a breakthrough increase the return on scientific investment without cannibalizing future advances? With the necessary administrative infrastructure in place, conducting this experiment would be straightforward. First, identify all the breakthrough signals between 2018 and 2023, select half at random, and commit to a decade of investment. For biomedicine, a six year window should yield about 30 topics with the potential to produce a breakthrough. Providing strong support to half of these might be accomplished for $300 million a year. That’s roughly half of the recent annual budget of the NIH Common Fund or around 20% of the fiscal year 2025 budget for ARPA-H. After five years, then again at ten, compare to see which group — the one that was actively managed, or the control — produced more breakthroughs, and on what timescale. Although we used biomedicine as an example, the same experiment could just as well be run for physics, materials science, or any other discipline. Any attempt to undertake such an experiment should keep three points top of mind. First, we can predict the topic of future breakthroughs, but the people and vision for how to move the work forward are still important. In practice, this means success requires active program managers with the expertise to develop the science and the authority to do so, including by recruiting investigators. Second, we would be wise to learn from the failures of past attempts to fund transformative research. High among these are funding modestly repackaged work, confusing the genuinely novel with the merely unfamiliar, and relying too much on incumbent investigators. All of these risks can be mitigated by thoroughly and intelligently integrating high quality data into portfolio management. Finally, we need to have patience. Even with strong funding support, producing a breakthrough takes time. If supporting breakthroughs is the best way to nurture the birth of new fields, we also need to accurately describe and properly manage the other two stages, so that we invest wisely throughout the productive lifetime of ideas and divest once they reach the point of diminishing returns. We would benefit from more study of all of these phases, especially the transition from one to another. More research could answer questions like: When does a breakthrough become an established field? How do the availability of funding, the size and characteristics of the available workforce, and the accumulation of evidence that disagrees with prevailing models affect a field’s decline? Exactly how do old ideas give birth to new ones, and can we speed up the process? The more we understand about the dynamics of scientific progress, the better we can maximize the odds that our curiosity leads to results. I’d call that finding a way to make our own luck.
‘America is back’: Trump kicks off Great American State Fair with flyovers, patriotic National Mall speech
Trump kicks off the Great American State Fair on the National Mall, comparing his political movement to the American Revolution at the 250th anniversary.
The most controversial fossil site in human evolution just got even more puzzling
Scientists studied the remains of a mysterious human relative called Homo naledi found deep in a South African cave and determined they were all female.
Why South Africa’s leopards shrank to half their normal size
A hidden population of South African leopards has revealed a remarkable evolutionary story. Researchers analyzing entire leopard genomes discovered that the Cape Floristic Region’s leopards are not only much smaller than most African leopards, but also genetically distinct after being isolated for roughly 20,000 years. Surprisingly, despite their small population, they have retained much of their genetic diversity.
Revolutionary War ship gets a makeover 250 years after setting sail
The U.S. has been celebrating its milestone
Revolutionary War ship gets a makeover 250 years after setting sail
The U.S. has been celebrating its milestone
They’ll never forget Steve Spurrier in Florida. He’s going to make sure of it
Few people are more associated with 1990s college football than Steve Spurrier, whose Fun 'n' Gun offense revolutionized the Florida Gators.
Introducing: Grand Seiko Updates The Core Evolution 9 Collection With Tapered Bracelets And Micro-Adjustment Clasps (Live Pics)
A whopping nine new references with both major and subtle tweaks.
First Look: The new 37mm Grand Seiko Spring Drive UFA Lake Suwa SLGB015
The new Grand Seiko Evolution 9 collection SLGB015 is a 37mm interpretation of the blue Lake Suwa dial, with the UFA movement.
Grand Seiko Launches Four New References In The Updated Evolution 9 Hi-Beat Collection
✓ Grand Seiko introduces the updated Evolution 9 Hi-Beat collection ✓ Four new references with live photos! ✓ Read more here! ✓
The Grand Seiko Evolution 9 Spring Drive U.F.A. Models Get Serious Fan-Requested Updates
✓ Grand Seiko Evolution 9 gets five Spring Drive U.F.A. models ✓ New 9RB2 accuracy, materials, and clasp ✓ See them here
Science museum brings soccer tech to World Cup fans
Soccer & Technology from the FIFA Museum, in its North American debut in Vancouver, has drawn hundreds of fans to Science World to study the game's evolution as organisers aim to accelerate soccer's growth in ice hockey-mad Canada.
A Yankee Notebook: The evolution of language and politics in America
A nostalgic reflection on the changing language and events of the past, comparing them to current attitudes and political rhetoric.
Can the Sugar Molecules That Coat Our Cells Predict Our Health?
Can the Sugar Molecules That Coat Our Cells Predict Our Health?: Glycans, once ignored, may revolutionize medicine
Building a Roadmap for Hubble Science into the 2030s: Revealing Atmospheric Structure and Evolution in Substellar Worlds Using HST
Substellar objects occupy a unique place in our universe
Roma eyeing Greenwood and 3 other attackers
Roma are undergoing a makeover in attack, and a revolution is expected. Gasperini has laid out the path: the attacking line will need to be improved ahead of next season, when the team will also be co...
Honkai: Nexus Anima ‘Evolution Test’ begins July 9
miHoYo will host the “Evolution Test” for creature-collector adventure strategy game Honkai: Nexus Anima beginning July 9 across PC, iOS, and Android, the company announced. An end date…
Butterfly that barely ages could help unlock longevity secrets
Scientists discovered that Heliconius butterflies have evolved an extraordinary lifespan, living several times longer than closely related species. Even more surprising, some show little sign of physical decline as they age. Their unusual pollen-feeding lifestyle may play a role, but the research suggests deeper evolutionary changes are also helping them stay healthy for longer.
Scientists Just Found Something Weird Inside Moss
A surprising discovery inside desert mosses could reshape scientists’ understanding of plant evolution.
The first primates may have evolved in the cold, not the tropics
A surprising new study suggests the earliest primates didn't originate in tropical forests but in cold, dry parts of North America. Some may have even survived seasonal Arctic conditions by slowing their metabolism or hibernating. Researchers found that dramatic climate shifts, rather than warmth, played a major role in driving primate evolution and expansion. The discovery reshapes our understanding of how our own lineage began.
Iranian Guards' business empire to win big if US sanctions lifted
Four senior Iranian sources described how the Islamic Revolutionary Guard Corps was uniquely positioned to capture a large share of any financial rewards that would accrue from sanctions relief.
Iranian Guard’s business empire to win big if U.S. sanctions lifted
As the two sides eye a deal to end the war that could unlock billions of dollars for Iran, the elite Revolutionary Guard is poised to be one of the biggest beneficiaries.
Unusual creatures are more appealing: What guppies teach us about evolution
Spanish biologist Ignacio Paulin became fascinated by the behavior of these fish, in a project that could now disappear due to budget cuts by the Trump administration
Ancient Gem Popular With Romans And Victoria's Elite Found In New Martian Rock
An international team of scientists has discovered a completely new type of rock and the mineral garnet in a Martian meteorite fragment, unlocking fresh secrets about the geological evolution of Mars.
Ozempic changed obesity treatment, but experts say the real revolution is next
The obesity treatment landscape is changing fast, with GLP-1 drugs opening the door to more effective care than ever before. Experts now envision a future where medications, minimally invasive procedures, surgery, and precision medicine work together to deliver better long-term results.
Advances in leadless conduction and Bachmann’s bundle pacing next frontier in physiologic pacing
Leadless pacing in the Bachmann's bundle may be the next phase in the evolution of cardiac pacing technology.
Is Flutter Entertainment plc (FLUT) A Good Stock To Buy Now?
Is FLUT a good stock to buy? We came across a bullish thesis on Flutter Entertainment plc on r/ValueInvesting by LowKey-Revolution36. In this article, we will summarize the bulls’ thesis on FLUT. Flutter Entertainment plc’s share was trading at $101.83 as of June 18th. FLUT’s trailing and forward P/E were 121.78 and 13.50 respectively according to Yahoo […]
The Case Against Science
In debates of vaccination, evolution, and climate change, the case follows a very similar playbook: to undermine trust in established scientific understanding all one needs to do is create doubt.
New Zealand scientists working on 'R' win major global award
Scientists working on the revolutionary 'R' programming language invented at the University of Auckland have won a top award intended to be a Nobel Prize for statisticians.
DNA time stamps reveal the strawberry’s surprising origins
Researchers have created a new way to reconstruct the evolutionary history of complex plant genomes by analyzing genetic traces left by transposable elements. The technique revealed that modern strawberries were assembled through multiple ancient genome-merging events, shedding new light on how major crop species evolved.
Baby crocodile-like fossils just blew up a long-held evolution theory
Turns out, the first animals to walk on land weren't amphibians.
Jillian Michaels says leaving the left felt like 'Neo in the Matrix' and warns it 'comes for everyone'
Jillian Michaels compares her political evolution to Neo in "The Matrix," describing how COVID, media distrust, and marriage shifted her views.
Social media’s next evolution: user-controlled algorithms
Social media feeds are becoming more customizable as platforms like Threads, Instagram, and TikTok introduce tools that let users directly influence the algorithms powering their recommendations.
Saint Louis Science Center to reopen James S. McDonnell Planetarium with unprecedented upgrades
The Saint Louis Science Center will reopen the James S. McDonnell Planetarium on July 18, featuring revolutionary new technological upgrades to the space’s sound, visuals, and capabilities. Alongside the new upgrades, the Science Center will introduce two new live shows that take full advantage of the planetarium’s updated features. “This equipment allows us to match […]
Claro USA and reVolver Podcasts Unveil Claro Música Pulso, a Reimagined Entertainment Platform Featuring Podcasts, Music, Video, Radio and More
Claro Música Pulso launches with more than 500,000 subscribers and expands through a strategic partnership with reVolver PodcastsDALLAS, June 16, 2026 (GLOBE NEWSWIRE) -- Claro USA and reVolver Podcasts today announced the evolution of its entertainment platform with the launch of Claro Música Pulso, a redesigned and enhanced digital destination that brings together music, podcasts, radio, video, and future multimedia experiences within a single, intuitive ecosystem. Building on the success of C
Entertainment Partners at 50: Inside Evolution From ‘Little House’ to ‘The Pitt’
Entertainment Partners at 50: Inside Evolution From ‘Little House’ to ‘The Pitt’.
Devoted dads and citizen science: The evolution of parental care in harvestmen spiders is uncovered
Citizen science data from the popular platform iNaturalist has helped uncover the evolution of parental guarding behavior in harvestmen spiders, as shown in research published in the Zoological Journal ...
Car Nut Sold a 1963 Impala SS 409 (the Great One), Regretted for 45 Years, Got Rare '63 SS in Return
The car was meticulously preserved by the original family for 57 years, and it has a unique dealer modification to accommodate the first buyer’s uncommon size
Is SMIC N+3’s Metal Pitch Smaller than Intel 18A’s?
Almost four years ago, we published that SMIC had started shipping 7 nm (N+1) chips. Now, SMIC is shipping its third-generation 7 nm (N+3) process in Huawei’s Kirin 9030, with a minimum metal pitch of 32.5 nm, about 10% tighter than the 36 nm minimum metal pitch shipping in Intel’s latest Panther Lake CPUs on 18A. The headline is true, but incomplete cherry picked metric. N+3 reaches the density of TSMC N6 through aggressive DUV multi-patterning and design-technology co-optimization (DTCO), but it pays for that in complexity, efficiency and process control. We found this and more in our reverse engineering and teardown where we cover SMIC’s N3 process technology, Huawei’s packaging, memory, architecture, and more. SemiAnalysis has been building a state-of-the-art teardown lab in Oregon capable of analyzing the world’s most advanced and important chips over the last year and half. We have already generated revenue on advanced datacenter chip teardowns including our recent reverse engineering of a major TSMC customer’s COUPE CPO optical engine + EIC 3D stack. This is the first public report from the SemiAnalysis Teardown Engineering & Evaluation Lab, or STEEL for short. The lab is aggressively scaling up and out and we’re excited to announce it publicly. This is a bit of inconvenient timing for TechInsights as they are private equity owned and currently being sold while having enjoyed virtually no credible competition for decades. This has led to TechInsights underinvesting in CAPEX. SemiAnalysis exceeds TechInsights in revenue despite no venture or private equity ownership and being founded only 6 years ago. Because we have no external investors and are founder led, we move faster, build faster, and we can release client chip teardowns for free regularly, while focusing on datacenter for our major clients. Here’s the first public image from our lab, the HiSilicon Kirin 9030 Pro SoC: This report will detail our teardown of the Kirin 9030 and our findings on SMIC’s N+3 process, the most advanced in China. For comparison, we’ll show our teardown of the MediaTek Helio G99, made on TSMC N6. Through this comparison, we can look at the effect of export controls – SMIC N+3 and TSMC N6 are comparable nodes, but one is heavily export-controlled, the other free to use the West’s most advanced equipment. Here we see both China’s progress and constraints. SMIC N+3 reaches TSMC N6-class logic density, but it requires far more aggressive DUV multi-patterning, so it does not match N6 on process maturity or cost. The Kirin 9030 Pro performs similarly to three-year-old Android flagships, and trails far behind the current flagship SoCs from Apple, Qualcomm, MediaTek, and Samsung. The efficiency gap is even wider. Export controls have not stopped Huawei and SMIC from shipping advanced silicon, but they have forced a different path. Without EUV, SMIC is leaning harder on DUV multi-patterning, DTCO, and increasingly complex integration. The roadmap continues forward through tighter design rules and backside power, but each step adds cost and process risk. Huawei’s τ scaling and LogicFolding show another path: stacking active logic and recovering density through advanced packaging and system-technology co-optimization (STCO). To understand the Kirin 9030, we must first understand Huawei’s SoC history. HiSilicon is Huawei’s chip design arm, responsible for the Kirin smartphone SoCs, Kunpeng server CPUs, Ascend AI accelerators, and switch/router networking silicon. Before export controls, Huawei was TSMC’s largest customer – the only customer on TSMC’s first EUV node, N7+, and among the first on N5, alongside Apple. That ended in late 2020. Huawei switched to Qualcomm SoCs in its flagship smartphones, though export controls limited them to 4G-only variants. In late 2023, Huawei returned to in-house silicon with the Kirin 9000s, a successor to the Kirin 9000, fabricated on SMIC N+2 instead of TSMC N5. In the following years, they released the Kirin 9010 and 9020 on the same N+2 process. These chips used Huawei’s in-house TaiShan CPU cores and Maleoon GPU. We have not torn down a Kirin 9020 ourselves, so the predecessor die shot is from Kurnal. The die shots show how Huawei spent its silicon budget: which functional blocks are where, and how their areas compare to the predecessor. First, a quick guide to the major blocks on the die. The total die area is nearly identical, but the 9030 uses that area more aggressively. A denser process lets Huawei fit an extra middle CPU core, more GPU and NPU cores, and larger caches into the same footprint. In contrast, the Helio G99 is a much smaller, low-cost SoC, built for budget smartphones rather than a flagship device. While the Kirin 9030 is ~140 mm², the G99 is only ~29 mm², roughly one-fifth the area. The underlying TSMC process technology, however, is directly comparable as a baseline for analyzing SMIC’s. The Kirin 9030 is an evolutionary refresh, not a clean-sheet design. Its CPU, GPU and NPU cores carry over the 9020’s families, and the gains come from three levers: the SMIC N+2-to-N+3 process step, DTCO and floorplan work, and incremental microarchitecture. Area is where the first two show up, and the 9030 scales well here. Performance and efficiency are the harder test. Huawei’s design holds up better than its node would suggest, but the chip still trails, both because N+3 sits behind the leading-edge nodes and because its cores, while competent, remain a few generations behind the newest designs. The new prime core is an incremental update. The main changes are a 10% frequency increase from 2.5 GHz to 2.75 GHz and a doubling in the L2 cache from 1 MiB to 2 MiB. Despite the increased cache, the core size decreased by 7.6%. Excluding the private L2 cache, the core size decreased by 21%. This is a large reduction for an incremental node. Compared with the TaiShan New V120 core in the Kirin 9020, the Kirin 9030’s middle core is almost unchanged architecturally, yet each core shrinks by ~22%. Most of that comes from the move from N+2 to N+3, with layout likely accounting for the rest. Visually, the most noticeable change is the increase from 3 middle cores to 4. There is also a 20% increase in the shared L3 cache of the big cluster. This helps to improve multi-core performance without sacrificing much in terms of area. Even with each core shrinking, the big CPU cluster’s total area is essentially unchanged. The per-core savings went back into an additional middle core and larger caches. The tiny cores shrank less than the prime core (excluding its L2 cache) and less than the middle cores. This is likely because fixed overhead is a larger share on a small core. We cannot resolve any architectural changes from the die shot alone, but the per-clock and efficiency gains shown below point to more than pure process and layout scaling. The area reduction was offset by a doubling of the shared L2 cache from 2 MiB to 4 MiB, leaving the total tiny CPU cluster area slightly larger. Area is the easiest improvement to see from a die shot, but it is only one part of PPA (power, performance, area). For modern logic, power and performance matter just as much, and often more. Since Dennard scaling broke down in the mid-2000s, voltage and frequency have not scaled in step with transistor dimensions, so each node has had to fight harder for gains in performance and efficiency. The starkest comparison is not Kirin 9020 versus Kirin 9030 Pro. Apple’s efficiency cores run circles around Huawei’s prime core. Apple’s low-power core delivers 20% higher integer performance while drawing only 1 W, compared with 4.5 W for Huawei’s prime core. N+3 matches TSMC N6, but N6 is several generations old. Apple and Qualcomm build on N4 and N3P, which are denser and sit on a better voltage-frequency curve, giving them a larger transistor budget and more performance per watt. The 9030’s own cores did improve. The middle and tiny cores gained 17% and 14% in per-clock integer performance over the 9020, with floating-point flat on the middle core and up 11% on the tiny. The tiny core improves cleanly, with performance rising while power falls and efficiency increases by 45% in integer and 24% in floating point. The middle core is mixed: integer performance rises but power rises faster, cutting integer efficiency by 7%, while lower power lifts floating-point efficiency 16%. Per-clock gains at the same or lower frequency are microarchitectural, so the cores are tuned, not just shrunk. Both also failed to hold their rated maximum frequencies, pointing to thermal, power, or stability limits. Per clock, the middle core sits around Arm Cortex-A720 and the tiny core near the Cortex-A520; absolute performance trails because Huawei clocks them much lower. The prime core is roughly Cortex-X2 class per clock, a 2021 design. Apple’s 2020 M1 Firestorm core is still 35% higher per clock and 57% faster in absolute integer performance at a similar 4.5 W. The current leading edge is further ahead again: the Apple M5 P-core is 60% higher per clock and 2.7× faster, the Arm C1 Ultra 45% higher and 2× faster. Matching older high-end cores per clock is a genuine design achievement. What Huawei cannot match is the voltage-frequency curve and transistor budget of leading-edge nodes, which let Apple, Qualcomm and others spend more transistors in the same area on wider cores, larger caches and deeper buffers while running at lower voltage. Huawei’s LogicFolding roadmap is one answer, stacking active logic to recover density and shorten signal paths. We return to it later. The GPU compute units (CUs) changed more visibly than the CPU cores, moving to a more rectangular layout for both the arithmetic logic unit (ALU) clusters and the CU overall. Even with ray-tracing support added, a CU shrank ~28%. However, that shrink is offset by the increase from 4 to 6 CUs and the area outside the CUs grew 33%. Overall, the GPU cluster is larger by ~10%. The GPU is where Huawei makes its biggest gains. The Maleoon 935 is not competitive with current flagships, but it is a large step up from the 920 and reaches older-flagship territory. In 3DMark it is 70% faster in Wild Life Extreme (WLE) and 79% faster in Steel Nomad Light (SNL) than the 920; with 11% higher clocks and 50% more CUs, the ~67% theoretical uplift roughly matches WLE and is beaten by SNL. It edges ahead of the Snapdragon 8+ Gen 1 in WLE and SNL, and the Dimensity 9200 and Apple A16 in WLE, but stays far behind newer parts: the Snapdragon 8 Elite Gen 5 and Dimensity 9500 are ~2.4–2.6× faster in WLE and ~3.2× faster in SNL. The Maleoon 935 is Huawei’s first GPU with hardware-accelerated ray tracing; there it lands slightly ahead of the Exynos 2200, and on par with the Apple A16, with current flagships up to 3.7× faster. The Neural Processing Unit (NPU) saw the largest structural changes of any block, moving from a Lite and a Tiny core in the Kirin 9020 to a Lite and two Tiny cores in the Kirin 9030. Both core types also show significant layout changes. This is a reversal in Huawei’s NPU design. The Kirin 9000 5G, its last flagship chip on TSMC N5, used two Lite and one Tiny core. The series of SoCs on SMIC N+2 moved to one Lite and one Tiny core, likely for area savings. With the Kirin 9030, Huawei has shifted back toward a larger multi-core NPU cluster, but with the additional area going to a Tiny core rather than a Lite core. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Before diving into the process stack, the package and memory are worth separating from the SoC itself. The Pro variant of the Kirin 9030 carries 12 GB of Samsung DRAM, with two stacks of four dies each. The dies were identified as the K4L2E165YD, a 12 Gb LPDDR5X-9600 device fabricated on Samsung’s 1a node, the fourth generation of its 10 nm-class DRAM after 1x, 1y and 1z. 1a has shipped in volume since 2022, so this is current memory rather than older-node inventory. The 16 GB Pro Max variants we obtained were found with both CXMT and Samsung packages. The CXMT package is marked CXDD7JEDM, with two stacks of four dies, packaged in week 45 of 2025. The inferred die dimensions from X-ray computed tomography (CT) are consistent with a known density of ~0.3 Gib/mm² for the CXMT G4 process, roughly equivalent to other manufacturers’ 1z processes. The Kirin 9030 uses a typical integrated package-on-package (iPoP) stack: multiple DRAM dies in a memory package sit above an organic redistribution layer (RDL) interposer, which sits above the SoC and package substrate. The full package is then mounted to the printed circuit board (PCB) through ball-grid array (BGA) solder bumps. The memory package substrate is a thin bismaleimide-triazine (BT) laminate carrying the LPDDR5X stack. The organic RDL interposer over the SoC routes the PoP signals around the die and carries possible dummy thermal copper pillars. The package substrate, a thicker Ajinomoto Build-up Film (ABF) build-up over a BT core, fans the flip-chip bumps out to BGA pitch and embeds the power planes. The whole stack is organic. The only silicon is the SoC and the LPDDR5X dies; there is no silicon interposer. Keeping it all-organic brings the package’s coefficient of thermal expansion (CTE) close to the PCB’s, reducing board-level warpage, and avoids the cost of a silicon interposer the SoC’s bandwidth does not need. In an iPoP stack, the memory package connects to the organic RDL interposer through an array of solder bumps. Underfill fills the gap around those bumps, adding stiffness and protecting the joints from mechanical stress. The Pro and Pro Max variants differ here, which we cover behind the paywall. The die shot and architecture tell us how Huawei allocated its silicon budget. The process tells us what SMIC can manufacture. We use the Helio G99 as the process reference for TSMC N6. Both SMIC N+3 and TSMC N6 are evolutions of previous 7 nm-class nodes. We used targeted TEM cross-sections through logic and memory regions, imaged in both fin-cut and gate-cut directions. Each cross-section caption gives its horizontal field width (HFW), the real width of the imaged area. We start at the transistor fins, then move up through standard cells, local interconnect, and SRAM. SMIC has not overtaken Intel or TSMC. It uses aggressive DUV scaling and DTCO to reach N6-class density, but that density doesn’t translate into comparable performance and efficiency, for two reasons: the node gap to leading-edge nodes, and Huawei’s core designs. Fin Profile One of the most important knobs in a FinFET process is the fin profile: the shape of an individual fin and the channel where current passes from source to drain. The ideal fin is tall, narrow, and nearly vertical. A taller fin increases effective channel width, while a narrower fin improves electrostatic control by thinning the body the gate must control. Push either too far, and the process pays for it: weaker drive current, fragile fins, taper, footing and line-edge variation that hit yield and device variability. The Intel 22 nm, 14 nm, and 10 nm fin cross-sections show how FinFET nodes have improved over time. 22 nm fins were a first-generation structure, relatively short, wide and strongly tapered. The shape limits current density and reduces gate control uniformity across the height of the fin. At 14 nm and 10 nm, Intel pushed the fins taller and narrower while also making the sidewalls more vertical. Rather than shrinking the device, these changes increase the effective channel width per fin and improve electrostatic control. The trade-off is that taller fins at tighter pitches are much more difficult to manufacture. Now, let’s compare the Helio G99 on TSMC N6 with the Kirin 9030 on SMIC N+3. Both processes are in the same class, with fin pitch of 30-32 nm on N+3 and 34 nm in our N6 cross-section. The pitch for N6 is especially interesting as N7’s HD library is generally listed with a 33 nm fin pitch, and N6 did not shrink pitches directly. Its density gains came from DTCO instead of tighter pitches. The 34 nm pitch was stable across our sampled region and serves more as a comparison against the SMIC N+3 we have not investigated further. Pinning down N+3’s fin patterning scheme takes more than one core unit. The CPU cores show a dense ~32 nm pitch, with the pitch between N-P fin pairs alternating between 78 and 88 nm. Logic alone may be consistent with dual-pitch mandrels of 120 and 110 nm, but this is a complex and unusual approach. Combining the pitch from the the 8T SRAM, which has more complex repeat unit, with the CPU core sequence allows us to reverse engineer the patterning steps with more confidence. As both the logic and SRAM should share the same base grid, a single CD mandrel lithography pattern with 128 nm pitch undergoing SAQP produces a die-wide ~32 nm grid (128 nm/4), which supports the pitch sequencing seen in both logic and SRAM cells. In the sampled cross-sections, N+3 shows a taller, narrower, higher-aspect-ratio fin than N6. The measured fin aspect ratio is ~9.5:1 on N+3 versus 7.8:1 on N6. N+3 also shows less top rounding, with an estimated radius of ~2 nm, compared with 2.8 nm on N6. Even though the fin widths differ, the ratio of top rounding to fin width tells the same story, with N+3 at 0.37 and N6 at 0.44. In a geometric sense, lower is better; a perfectly rectangular fin would have no top-rounding penalty. These are single-digit-nanometer features measured from a handful of cuts, so treat the absolute numbers as approximate. The important result is the relative gap: N+3’s fins are consistently taller, narrower and less rounded than N6’s. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Standard Cell A standard cell is the basic building block of chip layout: a fixed-height row pairing one NMOS and one PMOS transistor that share a gate, tiled in a grid to build logic blocks. The key dimensions are contacted gate pitch (CGP), cell height (CH), fin count, and the lower-metal routing grid. To measure density, we use the Bohr metric: a weighted average of NAND2 gate area (60%) and scan flip-flop area (40%). This represents a realistic mix of combinational and sequential logic. This metric has its limitations, especially for complex cell layouts like TSMC’s FinFLEX, which alternates cells with different fin counts. Even so, it is the best metric for a pure process-level comparison. Another important measurement is the fin pitch; it refers to the distance between two fins of the same transistor. In a FinFET process, multiple fins are used in each transistor to increase the drive current and thus performance. TSMC N6 ships both a high-density (HD) library with 2 PMOS and 2 NMOS fins per cell, and a high-performance (HP) library with 3 of each. More fins under the shared gate mean more effective channel width. HP cells switch harder at the cost of area. Designers mix the two on a die, primarily spending HP cells on timing-critical paths, and matching their PPA targets. In the Cortex-A55 core of the Helio G99, we found a cell height of 240 nm for the HD cell. MediaTek has used HD cells in the G99 to minimize die size and thus cost. As an SoC for budget smartphones at ~$100, this is essential. By contrast, we found only one library in the Kirin 9030, with 2 NMOS and 2 PMOS fins. This suggests a narrower library strategy than TSMC N6, where both HD and HP libraries are widely used. This likely reflects the smaller customer base and the more constrained domestic design and electronic design automation (EDA) ecosystem. In all three CPU cores of the Kirin 9030, we found cell heights of 228 nm, 5% smaller than on N6. This is also a reduction of 9.5% over SMIC N+2’s cell height of 252 nm. SMIC N+3 and TSMC N6’s HD library both feature a CGP of 57 nm. For SMIC, this is a 9.5% shrink over N+2. In the past, CGP and cell height alone may have been enough to compare transistor density. Now, however, we must consider scaling boosters and DTCO as well. SMIC’s density gain does not come from EUV. It comes from using every available DTCO booster aggressively. First is fin depopulation: reducing the number of NMOS and PMOS fins in each cell. The first FinFET nodes started with 3 or 4 fins for each transistor. SMIC N+3 and TSMC N6 HD both use only 2 fins per transistor, trading drive strength for density. Next is contact over active gate (COAG). By landing the gate contact directly over the active gate, instead of out over the isolation region, the cell height drops. N+3 integrates COAG while N6 does not. Our N+3 gate-cut cross-sections indicate COAG, with the gate contact sitting over the active region, while N6 shows an off-gate contact. Last is single diffusion break (SDB). Diffusion breaks are inserted between cells in the same row to provide electrical isolation, but they also introduce local layout effects (LLE), layout-dependent shifts in electrical characteristics. In the past, a double diffusion break was used, consuming the space of two CGPs. SMIC N+3 and TSMC N6 instead use SDB, saving area but increasing LLE sensitivity. This must be controlled at the process level and accurately modeled in the process design kit (PDK) so that EDA tools can account for it. Overall, SMIC N+3 has a transistor density of 113.4 MTr/mm², slightly above TSMC N6 at 107.7 MTr/mm². Even without EUV, SMIC has achieved density beyond TSMC’s mature N6 node which utilizes EUV. Metal Stack The smallest critical dimension in the teardown is M0; SMIC N+3 uses a 32.5 nm local metal pitch. That is smaller than the 36 nm M0 pitch on Intel 18A in Panther Lake. However, this does not mean that SMIC has a better process than Intel 18A or TSMC N3P. M0 is a local intra-cell routing layer. Its usefulness depends on the full interconnect stack: M1 and M2 pitch, track count, via and line resistance, design rules, mask count, overlay control, and routing flexibility. The 32.5 nm M0 is consistent with self-aligned quadruple patterning (SAQP), whose four-population line-width loading we read coarsely as alternating widths of 21.5 to 24 nm; M1 and M2, at 38 and 40 nm, are consistent with self-aligned double patterning (SADP), a single A/B split. On TSMC N6, M0, M2, and M3 sit at a relaxed ~40 nm and are consistent with SADP-class double patterning, with no need for quadruple patterning. That said, we measure M2 for example at ~43 nm, likely inflated by sparse routing. We do not assign any specific layer to EUV from our cross-sections; the distinction we can draw is double versus quadruple patterning, not lithography wavelength. Transistor-level density in the front-end-of-line (FEOL) sets an upper bound, but the design is ultimately limited by what the interconnect stack can route. The lowest metals are the most important for standard-cell density, but the semi-global and global layers determine how usable that density is at the block and chip level. Two axes are commonly used for chip cross-sections: the fin-cut and the gate-cut. The micrograph above is a fin-cut and shows metals 0 through 3. This axis lets us see the even-numbered metals, with M0 right above the fins. There are two kinds of M0 lines. The first are the power rails; these are wide wires for the VDD and VSS running horizontally at the top and bottom edges of each standard cell. The wide wires measure 55 nm across, more than double the other M0 lines. Their width minimizes resistance and reduces IR drop. The second kind are intra-cell wires, short segments within the cell that connect terminals to M1. These have alternating widths between 21.5 and 24 nm. The M0 pitch is 32.5 nm, a 19% reduction versus N+2 and N6. At this pitch, DUV patterning requires more aggressive multi-patterning, increasing mask count, overlay sensitivity, process complexity and cost. M0 is below what a single DUV-defined spacer (SADP) can resolve, so SMIC cascades a second spacer step (SAQP). The cross-section reflects the cost: the M0 trenches are visibly more re-entrant (narrower at the bottom than the top) than M1 or M2 on the same chip and carry a bright barrier-rich foot where the trench meets the etch-stop layer. That shape is partly the intended damascene profile, as a slightly narrow bottom helps void-free copper fill, but its magnitude at M0 is driven by the tight pitch and the higher trench aspect ratio. Intel 18A supports an M0 pitch of 32 nm, although Panther Lake has only shipped with a looser 36 nm pitch. This is due to Intel’s heavy usage of HP libraries. Among leading-edge nodes, 18A has the loosest M0 pitches due to PowerVia. With power routing moving to the backside, congestion is reduced, and the entire front-side metal stack can be used for signal routing. M2 is the first true inter-cell routing layer. It runs horizontally like M0 but spans across multiple cells to carry block-level signals. The M2 pitch sets the cell’s track height – the number of M2 tracks that fit between the VDD and VSS rails, defining what the library calls a 6-track or 7.5-track cell. This layer is the most important, limiting the routing of entire blocks. SMIC N+3 features a 5.7-track cell. The M2 pitch is 40 nm, a 5% decrease over N+2 and the same as N6. This shrink keeps the pitch at the edge of what is possible with double patterning. Future nodes will need to increase the number of masks for M2 as reducing the number of tracks is much harder due to the limitations in routing. The micrograph above is in the perpendicular direction, the gate-cut, and shows metals 0 through 4. This allows us to see and measure the odd-numbered vertical metal layers. The M1 pitch is 38 nm, 9.5% less than N+2 and 33% less than N6. The M1-to-gate ratio matters because it sets local routing flexibility. N+2 and N+3 use a 3:2 ratio, while N6 uses a 1:1 ratio, explaining the huge differences in M1 pitch. The more M1 lines there are compared with the gates, the more flexibility there is for power and signal crossing within the cell. Routing flexibility enables more complex and better cells. Clean fractional ratios are also preferred as a grid is periodic and improves layouts. The 3:2 ratio gives SMIC more local routing flexibility than a strict 1:1 grid, but it also complicates layout and patterning. This is a DTCO choice, with SMIC increasing process complexity to recover density and routability without EUV. This 3:2 ratio is not very popular in the leading-edge nodes. TSMC has only used it on N7+, the N5 family, and the short-lived N3(B). They have switched back to a 1:1 ratio for N3E. Intel has only used it on the 10 nm/Intel 7 family, with Intel 4, 3 and 18A all using a 1:1 ratio. Samsung is the only one still using a 3:2 ratio at the leading edge, using it in the SF4 and SF3 families. It remains to be seen if SMIC will remain at a 3:2 ratio or move to a 1:1 ratio with its future nodes. The industry is still actively exploring these local-routing ratios. At VLSI 2026, imec will be presenting work on even higher ratios, including a 2:1 scheme that can reduce area by up to 14%. We will be covering the conference in a future newsletter article. Subscribe We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. The final local interconnect layer for N+3 is M3, with a pitch of 44 nm. The M3 pitch is the same as on N+2 and 10% larger than on N6. The semi-global layers carry the majority of block-level signal routing. They have a coarser pitch than the lower local layers. On leading-edge nodes, they are designed to sit at the limit of DUV single patterning. M4 through M11 pitches were found divided between 80–82 nm (M4–M6), 128 nm (M7–M10), and 148 nm (M11). Given limited sampling, it is possible these are divided further in dense routing areas. At the top are two giant metal layers, M12 and M13. These have kept the same pitches as N+2 at 1920 nm and 4600 nm respectively. While the lower layers’ pitches are generally fixed by the process and library, the upper layers vary much more in pitch and count, depending on the design. Even two smartphone SoCs on the same process can have wildly different metal stacks. The Helio G99 carries fewer routing layers, reaching coarse metal pitches of 850 nm by M9, while the larger and higher-performance Kirin 9030 keeps fine pitches until M11. SRAM At the leading edge, SRAM is much more difficult to scale than logic. TSMC’s latest nodes have seen little to no bitcell scaling, while logic still has more DTCO levers to pull. While looking for other logic libraries in the GPU compute units, we stumbled upon the SRAM. The most common type of SRAM has 6 transistors (6T), but this cell had 8 transistors (8T) instead. 8T SRAM adds two transistors to form a dedicated read port. Unlike a 6T cell, where reading disturbs the storage, the decoupled read port removes read-disturb, improving read stability and letting the cell be pushed harder for performance. At first glance, the cut looked like an unusual logic library, with each cell row having 3 fins of one polarity and 5 fins of another. The rows also alternated in orientation. Energy-dispersive X-ray spectroscopy (EDS) resolved our confusion. The cut had not landed on the GPU logic, but on the SRAM macro beside it. The unusual fin pattern was due to the SRAM library. We return to EDS in the process flow analysis behind the paywall. SRAM libraries are not like traditional logic libraries. Due to the unequal number of PMOS and NMOS transistors, they require specialized rules and layout libraries. They do not need the flexibility of logic libraries, so they are hyper-optimized for one purpose: dense, reliable memory. The SRAM cell we found is a 1:2:2-2:2 cell. This means there is 1 fin per pull-up (PU) PMOS transistor, and 2 fins per pull-down (PD) and pass-gate (PG) NMOS transistor. These 2 PU, 2 PD and 2 PG transistors would usually form a single 6T high-current cell (HCC). An 8T HCC adds a read-pull-down (RPD) and a read-pass-gate (RPG) NMOS transistor, each with two fins. We measured a cell height of 406 nm, which brings the bitcell size to 0.0463 µm². That is a theoretical peak density of 21.6 Mib/mm². We estimate that a 6T HCC would have a cell height of 292 nm and a size of 0.0337 µm². This is ~12% larger than a 6T HCC on Intel 3 and 4. We also estimate the 6T high-density cell (HDC) to have a cell height of 228 nm and a size of 0.0260 µm². This is coincidentally the same as the logic standard-cell height measured earlier. The estimate puts the cell near Samsung 7LPP/5LPP and slightly below TSMC N7/N6. That is a theoretical peak density of 38.5 Mib/mm². 6T HDC is arguably the most important cell as it is used for the largest caches in a chip, the L3 caches and system-level cache (SLC). Both the Kirin 9020 and 9030 have split the SLC into 4 banks to raise total SLC bandwidth. In the Kirin 9030, the SLC increased from 2 MiB to 3 MiB per bank. Correspondingly, the number of arrays within the bank also increased by 50%, from 16 to 24. Each array can store 128 KiB and forms an orderly pattern on the die shot. From the Kirin 9020 to the Kirin 9030, the area of a 128 KiB SLC array decreased from 0.0477 mm² to 0.0392 mm², an 18% shrink. The achieved density is 25.5 Mib/mm², 66% of the theoretical maximum. While the SLC was quite similar across both chips, the L3 has seen some major changes, particularly in terms of its layout. The total capacity also went up from 10 MiB to 12 MiB. Much like the SLC, the L3 is also split into 4 banks. In the Kirin 9020, an L3 bank consisted of 16× 128 KiB arrays and 16× 32 KiB arrays. However, an L3 bank in the Kirin 9030 instead consists of 48× 64 KiB arrays. In the Kirin 9020 L3, a 128 KiB array was 0.0513 mm² and a 32 KiB array was 0.0154 mm². The size of the 128 KiB array is different on the L3 and SLC as the assist circuitry for the two arrays differs depending on their purpose. In the Kirin 9030 L3, a 64 KiB array is 0.0210 mm². Although not a like-for-like comparison, normalized for capacity, it is 18% smaller than the 9020’s 128 KiB L3 array and 31% smaller than its 32 KiB L3 array. The achieved density is slightly lower than the SLC, at 23.8 Mib/mm², 62% of the theoretical maximum. Unlike the L3 and SLC, the prime cores’ private L2 cache uses a 2-bank design. As the prime cores’ L2 is latency-critical, it likely uses 6T HCC instead of 6T HDC. The 9020 has 16 arrays in each bank while the 9030 has 32. Each array has a capacity of 32 KiB. A 32 KiB array in the L2 shrank from 0.0171 mm² to 0.0142 mm², ~17% smaller. The density is 17.6 Mib/mm², ~59% of the theoretical maximum for 6T HCC. SRAM scaled well from N+2 to N+3, shrinking by ~19%, close to the theoretical logic shrink. The caveat is that N+2’s bitcells were unusually large, bigger than comparable 7 nm-class nodes, so part of the gain is catch-up rather than true scaling. With the insights from STEEL’s teardowns, we will be doing a deep dive into SRAM in a future newsletter article. Subscribe Everything above came out of a single STEEL teardown: die annotation, block-level area analysis and TEM cross-sections through logic and SRAM. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Future Roadmap The same cross-sections that pin down N+3 also show where SMIC can go next. Although N+3 is already close to the practical limits of DUV multi-patterning in several layers, SMIC still has a few scaling levers left. A theoretical N+4 would likely start with cell height. N+3 uses 5 M0 tracks between its power rails. Moving to 4 M0 tracks, as on SMIC N+2 and TSMC N6, could reduce cell height by roughly 15%. The routing grid is only one side of the shrink; the front end also must fit into the smaller cell. One possible FEOL lever is reducing the p-to-n isolation spacing from two diffusion grid units to one. Intel used this scaling booster on Intel 4, and TSMC did so on its N3 family. This path trades layout flexibility for density. Fewer M0 tracks reduce local routing resources, while tighter p-to-n spacing raises integration and design-rule difficulty. M2 is also constrained by the cell height shrink. For SMIC to maintain a ~5.7-track cell, M2 would need to move toward ~35 nm. That would move another layer into SAQP territory. SMIC could also reduce the CGP from 57 nm to 54 nm. Intel reached a similar CGP on Intel 10 nm/Intel 7 without EUV. The local interconnect is also tougher. If SMIC keeps the 3:2 M1-to-gate ratio, M1 would need to shrink to 36 nm and would likely require SAQP as well. If SMIC moves to a 1:1 ratio, M1 could relax to 54 nm, but it would give up routing flexibility. Under this theoretical path, we estimate that SMIC N+4 could reach a cell height of 198 nm and a CGP of 54 nm, implying a Bohr density of 137.8 MTr/mm², on par with TSMC N5 or Samsung SF4. However, the difficulty is cumulative. Each step is individually plausible, but together they make N+4 harder than the transition from N+2 to N+3. It will likely take longer, cost more, and carry less process margin. A theoretical N+5 would require a larger integration shift. One possible path is backside contacts (BSCon), moving power routing and source/drain contacts to the backside, which would reduce front-side routing pressure and enable another reduction in cell height. The front-side metal pitches could relax to reduce the process complexity. M0 would likely relax slightly to ~34 nm, and M2 and M4 pitches could relax further. CGP is unlikely to shrink much further. Even with EUV, 48 nm has been the practical limit for yield and process control. This approach would allow N+5’s cell height to fall to 170 nm and its CGP to 53 nm. This implies a Bohr density of 163.6 MTr/mm², on par with Intel 18A’s HP library. However, this would not make N+5 cost-competitive with the leading edge. It would reach a similar density through a much more expensive route. The integration difficulty rises sharply, with new process flows for backside alignment, wafer thinning, contact reveal, and backside metallization. Past this point, standard density and interconnect scaling become increasingly unattractive. That is where Huawei’s roadmap stops looking like a normal foundry roadmap and starts looking like a packaging roadmap. At ISCAS 2026, Huawei unveiled its tau (τ) scaling law, reframing process scaling in the time domain. τ is the time cost of data movement and processing: switching delays in transistors, RC signal propagation delays in circuits, compute, memory, and networking latency. Outside Huawei’s terminology, this is called system-technology co-optimization. This is Huawei’s answer to its lack of EUV lithography. Without EUV, planar density cannot keep pace with TSMC, Intel, or Samsung. If transistor density cannot shrink further, Huawei’s alternative is to shorten wires, reduce buffering, and stack logic vertically. “LogicFolding”, Huawei’s implementation of this new scaling idea, is, in practice, an aggressive 3D stacking approach. AMD V-Cache places SRAM above or below a CPU die. AMD’s MI350X places active interposer dies (AIDs) underneath accelerator and compute dies (XCDs), with the AIDs handling cache, IO interfaces, the network-on-chip (NoC) and embedded metal-insulator-metal (MIM) capacitors. With LogicFolding, parts of the same logic block are split across multiple active dies bonded face-to-face at ultra-fine pitch. This allows Huawei to shorten some critical paths and reduce buffer overhead, not merely add cache capacity or offload the IO and interconnect. Shortening wires is where the higher clocks come from. A large share of a modern core’s delay and energy budget goes into driving long interconnects and the repeater buffers along them. LogicFolding distributes a block’s critical-path gates across multiple stacked tiers bonded at a very fine pitch, so the bond interface behaves like an additional metal layer and the longest paths get shorter. That is how Huawei expects to recover frequency and efficiency it cannot get from the process alone. Huawei’s roadmap shows its intent. Prime core frequency is targeted to rise from 2.75 GHz in the Kirin 9030 to roughly 5 GHz by 2031, far beyond what planar scaling alone could deliver. Prime cores with 3.1 and 3.39 GHz clocks are being tested in its labs, although their power consumption is unknown. Beyond that, chips are in the design, simulation or pathfinding phase, meaning the frequencies are targets. However, the direction matters more: LogicFolding also helps with performance, not just density. The catch is that Huawei’s density claim is not directly comparable to foundry densities. A stacked design can report more transistors per package footprint by adding active layers, even if each patterned die remains well behind TSMC or Intel in front-end density. This is how Huawei can claim to reach foundry 14A-equivalent density by 2031. This is not a like-for-like foundry comparison, with Huawei using stacked logic and measuring density per package footprint. On a normalized Bohr-density basis, SMIC N+3 is ~114 MTr/mm², 38% less than Intel 18A’s HD library. Huawei’s 3D roadmap closes the gap by stacking active logic, reaching 215 MTr/mm² by 2030. In 2031, the roadmap density jumps to 295 MTr/mm², implying either a third active layer, partial EUV insertion or aggressive planar DUV scaling. Huawei’s methodology makes other foundries look much denser as well. Applying it to AMD’s MI450X with an N2 top die on an N3P base die yields a theoretical density of 460.2 MTr/mm² in 2026, compared with Huawei’s 295 MTr/mm² in 2031. This Kirin 9030 does not use LogicFolding, remaining in a conventional mobile SoC package. Instead, it forms the baseline for how far Huawei and SMIC can push planar scaling. Future teardowns of Kirin and Ascend chips will show both planar logic density and Huawei’s hybrid bonding solutions. Export controls changed China’s optimization problem rather than ending it. EUV restrictions raised the cost and complexity of leading-edge manufacturing without freezing it. SMIC reaches N6-class logic density through DUV immersion, SAQP and DTCO, while Huawei shifts more of the burden onto architecture, packaging and system-level integration. Future nodes will be tougher. N+3 still had room to tighten local metals and reduce cell height and CGP. Further scaling without EUV leaves fewer levers. More aggressive multi-patterning adds masks and overlay error. SMIC can keep pushing DUV, but each step will get more expensive and less forgiving. The design side is just as critical. Huawei had domestic EDA tools and flows before the Kirin 9030, with the Kirin 9000s, 9010 and 9020 making that clear. Huawei was able to ship multiple consumer SoCs on SMIC N+2 and N+3 while cut off from the Western EDA stack. US export controls restricted EDA tools for advanced chips in 2022 but did not target tools for more mature chips. In 2025, the US government briefly placed much broader restrictions on EDA software from Synopsys, Cadence, and others, before lifting them less than two months later as part of a trade deal tied to rare earths. Huawei has been unable to access those tools because it remains on a US trade blacklist. That forced Huawei, SMIC and Chinese academic institutions to build their own tools and flows. Researchers at Peking University recently announced a prototype EDA tool for Huawei’s LogicFolding architecture, which requires a new flow to handle the multilayer layout and floorplan. This is not the same as replacing the full Synopsys or Cadence stack, but it shows where domestic EDA is headed: toward tighter co-optimization between architecture, process and packaging. These advances are also diffusing into the Chinese ecosystem. SMIC is licensing its N+2 and N+3 processes to HLMC/Hua Hong at the government’s direction rather than by choice. If the same process learning feeds into Ascend accelerators for AI training and inference, the choke point shifts from one named fab to an ecosystem. Alibaba’s T-Head silicon arm and Cambricon, a Chinese AI chip designer that is expected to supply ByteDance, could also be major beneficiaries. Sanctions aimed at SMIC alone become less effective once the manufacturing knowledge has spread to other fabs and design houses. China is not closing the gap with Intel, Samsung and TSMC. The teardown shows the opposite in several places: no EUV, no backside power, higher process complexity, and visible trade-offs. But China is still advancing. If domestic chips become good enough for phones, inference, networking and security-sensitive workloads, they can matter strategically without matching TSMC at the leading edge. Behind the paywall, we show what else STEEL can do, with material and process flow analysis of SMIC N+3, and analysis of the Kirin 9030 package. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline, access the full Kirin 9030 and SMIC N+3 analysis or to commission a custom teardown, contact sales@semianalysis.com.
Devoted dads and citizen science: the evolution of parental care in harvestmen is uncovered
Citizen science data from popular platform iNaturalist has helped uncover the evolution of parental guarding behaviour in harvestmen, as shown in research published in the Zoological Journal of the Linnean Society.
All Android Users Can Now Update Android Auto to Version 17.1
Google started the rollout of a new Android Auto version for production devices; the update brings the app to version 17.1
Millipedes beat vertebrates to land by 80 million years
Millipedes may have been crawling across Earth's landscapes nearly 460 million years ago, long before vertebrates ventured onto land. A new study finally completes their evolutionary family tree, revealing surprising clues about these ancient ecosystem engineers and their early chemical defenses.
In Retrospect: Poland, Russia, Europe
In April I spent a few days with Zryw, a Polish non-profit organization that recruits young people to enter politics and public life. Their aim is to build a new generation of civic leaders in Poland. I’ve followed their evolution from the beginning; my son is one of the founders. (“Zryw” means “impulse” or “burst of speed” in Polish). Julie Chmielewska, one of Zryw’s leaders, interviewed me at the event. Here is the conversation, lightly edited for grammar and context: Julia Chmielewska: Assuming that culture shapes institutions, could we conclude that some cultures are more prone to authoritarianism? Anne Applebaum: I don’t think so. Every culture, every nation, and every country has the potential for change. When we look at history, we can see that nations do change. Poland has changed, for example, from the 1980s to today. There’s a completely different mentality here than the one I encountered when I first visited, in 1988. The current generation sees the world through a different frame. So no, I don’t believe that certain nations are doomed to authoritarianism, or to anything. Of course, there are political and cultural traditions, but they can always be challenged. JC: So do you think there’s something intrinsic in human nature that pushes people to democracy, freedom? AA: I think there is something in human nature, a deep instinct, that pushes people towards freedom, yes. People who live in authoritarian countries – and I’ve heard this from them over and over again – sooner or later find themselves angered by a feeling of helplessness. They can see the unfairness of crooked courts, irrational political decisions. They naturally dislike the fact that somebody has all the power while they have none. In those circumstances, people who have no political background at all sometimes are politicized just by that frustration. I’m thinking of Svetlana Tikhanovskaya, for example, who was a Belarusian housewife, until the circumstances of her husband’s arrest forced her to become a politician. I met a woman who is a Uyghur from China, and who had come to live in Turkey. After several of her family members were arrested, she too was propelled into a political role. These kinds of experiences make people interested in democracy or political reform, even if they thought they didn’t care. I also think that the opposite is true: some people instinctively prefer homogeneity, order, hierarchy. They don’t like the confrontation of opinions or the noise of debate, and they lean towards a single leader or a unified regime. I think that most of modern history is shaped by the clash between those two different sides of human nature. JC: Which force do you find more powerful today? AA: I think they both have a lot of power and there’s no way of predicting who wins. Even in countries that seem very shut off or stuck in an authoritarian system can change. We’ve seen that happen. And vice versa, I think democracies can also begin to fail and slide into authoritarianism. So it’s very important not to be complacent in either direction. JC: I want to go into your history and your experiences. You’ve lived in Russia during a time of incredible change in the late 80s, and then you came back to do research in post-Soviet Russia. AA: I was a student in Russia just before the collapse of the Soviet Union. I then traveled and worked there extensively in the 1990s, and I met people who really were full of hope. They hoped that Russia could become a democracy, or at least a place that guaranteed freedom of speech, freedom of the press. These weren’t ideas that came from Washington. Although now the narrative in the Kremlin is different, I met many people who were working towards exactly that kind of transformation. A friend of mine ran a series of seminars – once a year, and then later several times a year, in cities all over Russia – designed to get people to discuss politics in new ways. She invited young politicians and journalists, as well as foreigners. I went to many of them, in Moscow as well as Volgograd and Novosibirsk. Over two decades, hundreds of people came to these seminars, and all of them wanted Russia to be different. I remain convinced that many Russians still want Russia to be different. It’s just that the old system, in the form of Putin, a representative of that system, returned. The KGB reimposed their power. And this wasn’t because of something to do with culture, this was to do with money and politics, and who was in charge. JC: You’ve partially answered my question... I wanted to ask whether that excitement of the 1990s was an exception from the Russian historical norm which has been rather authoritarian? AA: Of course, if you look at the history of Russia since the 18th century, there have always been liberal groups, reformers and revolutionaries. There were the Decembrists, in the early 19th century, and the rural populists later on, who tried to organize the peasantry. A significant group of liberal Russians appeared at the turn of the 20th century, people like the father of the writer Vladimir Nabokov, who was a Russian politician before the revolution. These groups were small in number, but sometimes had a broader significance. The Russian dissident movement in the 1950s and 1960s actually invented the modern human rights movement. It was their idea to hold the leaders of the Soviet Union accountable for the language they used, to remind them of the treaties they had signed and the promised they had made. They created the Helsinki group, for example, that held Soviet leadership to the language of the Helsinki Treaty, which formally ended the Second World War and which contained guarantees of human rights, at least on paper. That idea spread to Eastern Europe, and similar tactics were used here in Poland. (Benjamin Nathans recently wrote a great book about the Soviet dissidents, To the Success of Our Hopeless Cause) JC: But seemingly, even if they do ever get power, they could never hold on to it. AA: We don’t know, because they have never really had power. But in any case, we also don’t know what will happen in the future. There is no reason to assume that Russia will forever be condemned to totalitarianism. Even during the first fifteen years of Putin’s regime there was some form of democratic politics. Only when the full-scale war began did he bring everything to an end: he shut down all remaining independent organizations and killed his most important opponent, Alexi Navalny. But does that mean he is popular, that he enjoys legitimacy? Even now, we don’t really know what Russians think about him, or about the war. There is no way of doing real polling in Russia because nobody will answer an independent pollster over the phone. JC: Do you think that the flock of young people, especially young men, who fled Russia after the start of the war represent a continuation of liberal movements that refuse to partake in the authoritarian state, or do you think they are moving for the sake of self-preservation – “I don’t want to go to the army, so I leave”? AA: I’m sure it’s both. I actually know many people who left Russia for political reasons either in the very last years before the war, or else just after the war began. JC: And do you see a change in the young generation versus the old one that have fled? AA: It’s hard for me to say because the people who I know were mostly already politicized. I do know some younger people who left, but most of them were already either active in the opposition, or working as journalists. Many of them very self-consciously think of themselves as maintaining Russian culture abroad, just as in the 20th century the Soviet dissidents or the anti-communist White Russians once thought of themselves as people who maintained the true Russian culture, outside of Bolshevik Russia. JC: Let’s move on to Poland. One of your first experiences with Poland was reporting on Margaret Thatcher’s first state visit, in the autumn of 1988. You followed her around the farmers’ market. AA: She was making a symbolic gesture. She wanted to welcome free markets, but the only one she could really visit was the farmers’ market at Hala Mirowska. JC: And I want to talk about this area because today you can look out of any window in that district, Mirów, and see rows and rows of skyscrapers. How does it feel to see a country built from the ground in such a short time, both politically and economically? AA: You know, when you’re living in a period of dramatic change, it’s always hard to know whether the change is positive or negative. The transformation in Poland created winners and losers, as well as new classes of people, new political movements of different kinds. At the time, it sometimes just felt like turbulence. Now, we can look back at the 1990s and early 2000s in Poland and see in retrospect that the country was headed in towards prosperity and European integration. In around 2009 or 2010, I remember speaking to a woman who worked cleaning government offices, and who asked me if her daughter should study in Amsterdam or in London. This seemed to me to be a real transformation, and it happened very fast: within a few years, Poles stopped feeling like second-class Europeans, and a generation of younger Poles appeared who had no qualms about crossing borders. JC: We again live in turbulent times. Do you think we’re heading towards positive outcomes? AA: I can’t make predictions, because everything that happens tomorrow depends on what people do today. Also, history doesn’t have a trajectory. It doesn’t move in a particular direction. You only think it does afterwards. As I said, you can look afterwards at Poland in the 1990s and you could say this was a period of great progress. But not everybody at the time saw that. Sometimes people are very wrong about a given country’s trajectory. I remember people writing about Ukraine in the 1990s, about how dangerous it was that Ukraine was independent, that this was going to be an anti-semitic state, that Ukrainian nationalism was going to come back... and although you can say many bad things about Ukraine, the country made many bad choices, actually it became a pretty tolerant state which now has a Jewish president and until recently a Muslim defense minister. JC: In the 1990s Poland’s and Ukraine’s GDP were roughly similar. Ukraine was even a bit richer. So the starting point was similar for both of these countries, but they’ve turned out very, very differently. Even if we stop in 2014. Why do you think Ukraine “chose East”? Was it external influence? AA: No, I think Ukraine was in a different position. First of all, central and eastern Ukraine had been part of the Soviet Union since the 1920s, and had therefore experienced a longer period of occupation, repression, Sovietization and even Russification. Ukraine did not have, as Poland did, an alternative elite: a large cadre of economists and politicians, who already had some experience in opposition politics and in independent thinking. In Poland, the transformative finance minister, Leszek Balcerowicz, had already thought about how an economy might be decentralized before he took office. We can argue about how successful he was, but at least he was prepared to try something new. In Ukraine, people weren’t prepared. For one, there hadn’t been much space even for an illegal opposition in the previous couple of decades. Ukraine was also in many ways still emerging from colonial occupation. For the previous couple of centuries, many of the most capable Ukrainians had moved to Russia, and the first generation of leaders in independent Ukraine tended to be former Soviet apparatchiks. They didn’t immediately seek to become closer to western Europe. Instead, they looked for some kind of economic and political “third way” and an accomodation with Russia. Ukraine became stuck in this position, half-in, half-out and became pretty profoundly corrupt. JC: The Polish alternative elite had a vision of where they wanted the country to go. I think the general perception now is that this vision ends with the next election, right? Is this a natural process of gaining power? AA: Their vision, and it was shared by the time by politicians who now call themselves both left and right, was that Poland should join the EU and NATO, as fast as possible. My husband (Radek Sikorski) was in the very first government that said it wanted to join NATO. At the time this was taken very badly in Washington: the demand for NATO membership absolutely came from Poland, not from the US. But even then, in the early 1990s, many Poles already understood that the Russian sphere of influence would grow once again, that it was important to become part of the transatlantic alliance and an integrated Europe as fast as possible: NATO, the EU, the Council of Europe, all of the trading and security alliances. That consensus lasted through several different governments and over many years, even governments containing former communists. For twenty years, right, left and center disagreed about many things, but they all agreed on the direction that the country should go. In retrospect, that consensus created the basis for prosperity in Poland. JC: And regarding the Polish-Ukrainian relations. We know that antagonisms, e.g. the myth of Wołyń [a massacre of Poles that took place in what is now Western Ukraine, in 1943] are increasingly used in Polish political discourse today. In Ukraine, nationalist historians make heroes out of UPA, the Ukrainian revolutionary army, which is held responsible for this tragedy. Where do you see a start for burying the hatchet? Is the reconciliation of our nations possible? AA: So here’s a strange thing: For more than a decade after they both gained independence, Poland and Ukraine participated in a number of projects that were designed to solve exactly these kinds of Polish-Ukrainian differences. Books were published that were jointly written by Polish and Ukrainian historians, monuments were built. These projects were successful: If you’d asked me this question in 2010, I would have said that there are no real historical issues between Poland and Ukraine, that the two countries had mostly reconciled. For a number of reasons, this began to shift. In Poland, children and grandchildren of victims of the Wołyń massacre felt their tragedy hadn’t been fully recognized. In Ukraine, nationalist groups wanted the UPA partisans who had fought against the Soviet Union recognized for their heroism, despite the fact that some in this broad and not well-defined group were also linked to Wołyń. In both eastern Poland and western Ukraine, the memory of the ethnic cleansing that took place there in the late 1940s - Poles were moved West, Ukrainians East - to accomodate new borders has left feelings of displacement and bitterness. The wave of Ukrainian immigration, which started before the war, may have provoked some of this. But don’t underestimate the role played by Russia, which has always wanted to create discord between Poland and Ukraine, and pumps out propaganda to that effect in both countries. Vandalism on both sides of the border, damage done to cemeteries and monuments, is sometimes carried out by provacateurs working for Russia, just to create bad feelings. The Polish-Ukrainian conflict also hides a different reality: although there are real grievances and bad memories, the truth is that the biggest tragedies both nations experienced in the twentieth century were inflicted by the Soviet Union and Nazi Germany. That should unite these two countries, not divide them. JC: This week (19.04.2026 – Ed.) in Hungary we saw that using historical narratives to create grievance has no longer worked. Are you optimistic about the direction after Orban’s loss? AA: The Hungarian election was really important because it shows that people can actually resist powerful, dominant propaganda. The ruling party Fidesz controlled all of the TV, 90% of the newspapers, the constitutional court, the bureaucracy... and yet people had the nerve to vote against it and resist it. It’s also an important election because Hungary created a huge network of well-funded think tanks and foundations that were funding other far right groups and projects. So that loss is going to have a knock-on effect in other places too, maybe even in Poland. JC: What you’ve said about resisting propaganda reminds me of one of the interviews you did about talking to Russians in the post-Soviet era who claimed that people knew that the system was lying. Why do people choose to believe in these regimes anyway? AA: Because it’s useful. Stephen Kotkin, an American historian, once described how people would learn how to “speak Bolshevik”: It was just a language that you needed to use in order to get by in society. If you didn’t talk the way the regime wanted you to talk, then you might have problems, or lose your job, or your kids would not get into university. It was a way of getting along. Communist Poland was similar, at least in the early years. When I was writing a book about the Sovietization of Eastern Europe after World War II, I met a lot of people who wanted to talk a lot about the war, when many of them had done really heroic things. But almost nobody wanted to talk about the decade afterwards, between 1945 and 1956. This was when you had the short period of terror, violence and Polish Stalinism. To stay safe, people felt the need to just go along with what others were saying, or stay out of politics, or use communist jargon without necessarily believing it. I don’t judge them for it, and I wouldn’t describe all of those people as collaborators. It’s easy to feel moral certainty in retrospect, because we know that communism ended. But if you were living in 1949, it might not have been clear to you that communism was going to end. In very repressive societies, maybe about 10% of people who are really evil – collaborators, torturers. Maybe 10% of people are really brave and who find ways to resist. And then around 80% of people have kids, they have parents, they have to have jobs and they’ve had to get through it somehow. Strange though it may sound, I’ve found that the work I did on that book is now very useful in explaining some of what’s going on in the United States today. There are plenty of members of the Republican Party in Congress who know perfectly well that Donald Trump says many things that aren’t true. But they avoid criticizing him because it’s inconvenient, because they would get in trouble, because someone would attack them on the internet. So actually you don’t even need mass terror to get people to conform. JC: Is Gen Z reinventing agency? AA: We’ll see. In any generation you can find groups of people who want agency. If you live in a society that’s unfair, for example where a tiny number of people have captured most of the wealth, then at a certain point people rebel. This is always easier for younger people, who have you have less to lose. The question now is how the internet will affect the relationships between citizens and the state, and how it will change organizations. The “Twitter revolutions” people spoke about as early as 2008-9, mass protests organized online, have often proved to be very superficial. Although you can easily join something just by clicking, the work of creating a real movement requires physical participation. Successful mass movements of the past, for example the Civil Rights movement in the United States, were built by people who had spent many years together. They had participated in non-violent workshops together. They practiced and prepared. Just using the you can get everybody to show up at a certain moment, but then when the protest is broken up, nothing happens. It’s also true that the repressive regimes have more recently learned how to use the internet to undermine leaders and movements. Most of all, they now understand how to make people cynical. The form of propaganda that most modern authoritarians use - and I think the Russians really pioneered this - deploys sneering cynicism. Instead of praising the rulers, the regime propagandists mock the opposition movement leadership for being supposedly corrupt or sexually degenerate, with the goal of undermining any kind of idealism. JC: MAGA grew on the internet? AA: MAGA is a real grassroots movement. They had symbols, red hats, they showed up at rallies. But you’re right that the cynicism, the sarcasm and the distrust that the movement embodies came originally from the internet, and this is different. Fifty years ago, most European political parties had a social base in real organizations, in trade unions for Social Democrats, in church groups for Christian Democrats. As people stopped going to church and as the trade unions became smaller, the social base of these parties disappeared. Now people who wouldn’t have known one another in the past meet on the internet and create new movements, many of which don’t last. JC: Is history ending? Going in stale circles? AA: History never ends. In truth, human beings want contradictory things at the same time: order and freedom, stability and change. These things are never resolved, and when a society swings too far in one direction, people always push it the other way. But each time that happens, the result is different. Certainly it is true that we are now in a period when old philosophers and ideas from the 1930s are undergoing a revival. Carl Schmitt, who was a philosopher who was very influential on the Nazis, is back as an influence on both the far left and the far right, once again inspiring people to think that all politics has to be existential, that all politics is about defining and defeating enemies. In the US, some are also bringing back dominionism, the idea that we need a Christian and not a secular state. It’s also true that we are living through a more fundamental shift. The old left-right divide, which was mostly about the size of the state, is much less important now. Instead, we are arguing about more fundamental things: what are our rights, what protects our freedom. Or how much power do we want to give small elites, versus how much power to give ordinary people. In America a small group of very wealthy people now control information, because they control the social media platforms and AI, which means they determine what people will read and learn. Finding a way to preserve preserve zones of autonomy and independent thinking, this is going to be the main task for the next generation. JC: What is the one book that a person interested in Central Europe should read? AA: You could read my book “Iron Curtain: the Crushing of Eastern Europe” which tells the story of how the Soviet Union imposed its culture on the region. Or read Tim Snyder’s history of the region, “The Reconstruction of Nations: Poland, Ukraine, Lithuania, Belarus 1569-1999.” And everyone should read “The Captive Mind” by Czesław Miłosz, which describes exactly the phenomenon we were talking about: why do people collaborate? I joined Scott Galloway and the brilliant Fiona Hill in a discussion about the wars in Ukraine and Iran, the future of global power, and what these conflicts reveal about America's role in the world. Scott told us that this was the 400th edition of his podcast, which is quite a number: My friend Francesco Chiamulera runs a brilliant series of literary events, Una Colline di Libri, A Hill of Books, in the Prosecco Hills, a region of vineyards and elegant hill towns in the Veneto, north of Venice. We did an event in Vittorio Veneto and also drove and biked around the countryside. Buy Autocracy Inc Buy Iron Curtain Open Letters, from Anne Applebaum is a reader-supported publication. To receive new posts and support my work, consider becoming a free or paid subscriber. Subscribe
Poll: What were your favorite Xbox Games Showcase 2026 announcements?
From Gears of War: E-day to Clockwork Revolution, for this week's poll, we want to know: what were your favorite Xbox Games Showcase 2026 announcements?
How Iran's 'Stolen Revolution' failed to live up to its promise
Many supporters of Iran's revolution believed some form of democracy should govern the country. But over the decades, the Islamic Republic's radical religious rulers have launched brutal crackdowns on social justice and political freedom. Compass Points moderator Nick Schifrin discusses how the 1979 revolution failed to live up to its promise with Yeganeh Torbati and Bozorgmehr Sharafedin.
How Revolutionary Politics Make Art and Spirituality, Better
What if I told you, there’s a dynamic combination of art, politics and spirituality? One that fits our needs. One that fits this moment. It is Mass Line politics and American Romanticism.
AI boosts Lazer Logistics' efficiency in yard management
Lazer Logistics' AI tool, Uncle Phil, revolutionizes yard management by providing site managers with Phil Newsome's decades of logistics expertise.
Unfinished Revolution: Social Movements, Freedom Struggles, and the American Democratic Development -
APSA’s Engaging America’s 250th Webinar Series Unfinished Revolution: Social Movements, Freedom Struggles, and the American Democratic Development Tuesday, July 7, 2026 12:30 – 2:00 PM (ET) Register Here Join APSA for a discussion connecting American democratic [...]
This evolutionary biologist fuses art into her science
Victoria Glynn is studying how high temperatures are affecting ocean plankton. She also makes art to help communicate science to the public.
Albania’s Flamingo Revolution Spreads From Kushner Resort to Political Elite
As protests in Tirana extend into a second week, they have escalated from opposition to two €5 billion ($5.7 billion) planned resorts in ecologically sensitive areas linked to Jared Kushner into demands for the entire Albanian political establishment to step aside.
Panel discussion on politics of AI set
CHARLESTON – Berkeley Springs will play host Sunday to a panel discussion to look at the growing use of artificial intelligence – AI – along with the data centers powering the revolution, and the politics that is growing contentious not just in West Virginia, but nationwide. Tangle News – a national news outlet that looks […]
Panel Discussion On Politics Of AI Set In Berkeley Springs
CHARLESTON – Berkeley Springs will play host Sunday to a panel discussion to look at the growing use of artificial intelligence – AI – along with the data centers powering the revolution, and the politics that is growing contentious not just in West Virginia, but nationwide. Tangle News – a national news outlet that looks […]
Xbox Exclusives, Showcase Without Blade, Elder Scrolls 6, More From Matt Booty
Xbox leadership shook up its strategy this week with the reveal that "Gears of War: E-Day" and "Clockwork Revolution" would be Xbox exclusives.
Earth's first animals barely evolved until sex changed everything
Earth’s earliest animals may have held evolution back because they reproduced asexually, creating low-competition communities that changed very little over time. When environmental pressures pushed them toward sexual reproduction, biodiversity exploded and evolution accelerated dramatically.
New solar breakthroughs: the unexpected places scientists are finding revolutionary materials - Futura-Sciences
A Closer Look at Chemical Transformations The team’s breakthrough, recently published in the journal Nature Communications, is the scientific equivalent of pausing a movie in slow motion and noticing brand new characters on the screen. Instead of limiting themselves to the finished product of a reaction, the researchers examined every...
The Anatomy of a Conversion: Nicolaus Steno and the Search for Certain
Blessed Nicolaus Steno’s scientific discoveries and conversion to Catholicism emerged from a unified search for truth during the Scientific Revolution.
President’s message: Progress and opportunity for science and medicine
his is an extraordinary moment in time for the biomedical sciences. Seven decades ago, the discovery of the structure of DNA sparked a revolution in understanding life. In the decades since, the knowledge of fundamental biology we have accumulated has led to innovative treatments for many difficult-to-treat diseases, and many more are now within reach....
StockX Announces StockX Live, Plans to Bring Real-Time, Entertainment-Driven Shopping to its Marketplace This Summer
The launch of live shopping signals StockX's evolution into a multi-experience platform built for the next generation of commerce DETROIT, June 9, 2026 StockX,...
OU Extends Long-Term Partnership with Learfield’s Sooner Sports Properties; Sooner Evolution Center Announced
Under the extended agreement, Oklahoma and Learfield will build the Sooner Evolution Center, an on-campus, state-of-the-art facility that will continue to gr...
History of Science: Why is it important?
“The study of scientific history is vital for modern research, revealing that breakthroughs often stem from continuity rather than isolated revolutions”
A reporting checklist for large language models in behavioural science
Nature Human Behaviour - Large language models offer new opportunities for behavioural science, but their rapid evolution poses challenges for research rigour. We introduce a consensus-based...
Steve Rao: The AI revolution must include Main Street
Whether it is a family-owned manufacturer exploring automation, a local retailer adopting AI-powered marketing tools or a startup building the next generation of innovative products, small businesses will be among the primary beneficiaries — and users — of AI.
New Jersey AI Pioneer Honored at Liberty Science Center’s 2026 Genius Gala
Rumson resident Yann LeCun's work in the 1980s at the former AT&T Bell Labs facility helped revolutionize U.S. Postal Service mail-sorting systems.
Households outshine business in Australia’s rooftop solar revolution, report finds
Australia leads world in residential solar per capita with 22GW installed but commercial and industrial sector has deployed only a quarter of that
The weather and climate science AI revolution isn’t revolutionary
Machine learning has its limits—how is it being used?
Our evolutionary path to parenting—and sharing the load
"The Creatures' Guide to Caring" explores how communal child-rearing allowed animals from wasps to humans to evolve and thrive.
Xbox has clarified its approach to console exclusive games, after last night's PS5 snub for Gears of War: E-Day and Clockwork Revolution caught many off guard
Xbox's big multiplayer and live service games will continue to be multiplatform, Matt Booty has said.
Keir Starmer to say ‘tech revolution must work for everyone’ in speech on AI
Prime minister to give speech on the government’s technology policy this morning
The 12 Most Revolutionary Movies of 1976, a Year of Rebellion
Here 12 most revolutionary movies of 1976, a year when rebels and underdogs reigned at the box office. As America The post The 12 Most Revolutionary Movies of 1976, a Year of Rebellion appeared first ...
The Science Behind Why Your Pet Is Starting to Look… Human
From pugs to Persian cats, human aesthetic preferences are driving a new wave of convergent evolution.
Get a Pokémon TCG: <em>Mega Evolution—Pitch Black</em> Build & Battle Box Early
Open booster packs from a Mega Evolution—Pitch Black Build & Battle Box at a Prerelease event near you.
RGB LED could be the next big TV upgrade. Here's how it compares to Mini LED.
RGB LED is the latest evolution of TV backlighting. Here's how it compares with Mini LED and other modern display technologies.
Clockwork Revolution launches in 2027
First-person RPG Clockwork Revolution will launch for for Xbox Series and PC via Steam and Microsoft Store in 2027, publisher Xbox Game Studios and developer inXile Entertainment announced. It will…
Clockwork Revolution: Burlesque, Bullets, and Butterfly Effects
On behalf of the team at inXile entertainment, I’m thrilled to share more of Clockwork Revolution — our time-bending first-person action RPG set in the steampunk city of Avalon, with a cast of unforgettable characters, and a world that reacts deeply to every choice you make. We’re hard at work on the game and can’t wait for you to play it next year.
Inside SHA’s Revolutionary New Women’s Health Retreat
We visit SHA's clinic in Spain to experience its new female-focused pack, where hormones and longevity are approached as one interconnected system.
Jets defensive lineman hosts sports camp for individuals with developmental differences
Harrison Phillips, a Millard West alum and Jets defensive lineman, returned to his high school to host his Inclusion Revolution Sports Camp, supporting individuals with developmental differences and special needs.
Rock Ford showcases Lancaster revolutionaries in new exhibit
It’s well known that Lancaster was capital for a day in 1777. But that’s not the only historically significant moment in our nation’s earliest years with a Lancaster County connection.
Guild Wars 3, Modern Evolution of the MMORPG, Announced at Summer Game Fest for PC and PlayStation 5
/PRNewswire/ -- Critically-acclaimed game development studio ArenaNet® tonight announced Guild Wars 3™, the third entry in the legendary and beloved Guild...
Guild Wars 3, Modern Evolution of the MMORPG, Announced at Summer Game Fest for PC and PlayStation 5
/CNW/ -- Critically-acclaimed game development studio ArenaNet® tonight announced Guild Wars 3™, the third entry in the legendary and beloved Guild Wars®...
What scientists just uncovered about Neanderthals rewrites everything we thought we knew - Futura-Sciences
How did Neanderthals appear—and disappear? “How did Neanderthals appear? And how did they disappear?” To this day, these remain two of the big, unanswered mysteries in human evolution. For both questions, scientists have long suspected that a drop in genetic diversity may have played a role. Thanks to the study...
TVLine Asks: Which Not Suitable For Work 'Ship Is Best? Did Criminal Minds Escape Confuse? Was Pop Culture Jeopardy! Semi Too Hard? And More
We tackle the biggest questions from the week in TV: Not Suitable For Work, Pop Culture Jeopardy!, Criminal Minds: Evolution, and much more.
Scientists Thought They Understood Evolution. They Were Wrong.
Beneficial mutations happen quite frequently, but the world changes too fast for them to stick.
French-Iranian Persepolis author Marjane Satrapi dies of ‘sadness’
Satrapi's autobiographical novel was born from her experiences of Iran's Islamic revolution and war with Iraq.
Business briefs, June 5
Senators push CMS to reinstate nursing home ownership reporting requirements … New DOJ toolkit could turn EMTs, cops into nursing home watchdogs … Combatting racism in senior living and care requires ‘institutional courage’ to avoid status quo … CNA coverage declined, but few other staffing ramifications of COVID immunity … SNFs, aging Americans helping drive strong interest in healthcare property investment … Kendal launches comprehensive ‘brand evolution’
The evolution of in-vehicle entertainment
High-end and flashy infotainment systems on new vehicles are a big draw for modern drivers.
Dey Mansion: See 18th-century mansion where George Washington stayed
George Washington stayed in many homes during the Revolution. One estate, the Dey mansion in New Jersey, still stands today. Take a look inside.
Opinion | Melinda French Gates: America Needs a Menopause Revolution
Too many women walk out of their doctors’ office with no diagnosis, no treatment and no plan.
New social features further Plex’s evolution from media server business
Plex is increaingly focusing on content discovery and streaming rentals.
Revolutionary Work | From PSG to USA, Revs II sports performance coach Bilal Bejaoui has passion for producing pros
France native has found opportunity to grow in New England
FIRST ON FOX: Trump admin transforms DC hotspot once rocked by George Floyd protests in symbolic reversal
Trump's Department of the Interior transforms D.C.'s Freedom Plaza with a patriotic installation featuring Caesar Rodney and Revolutionary War soldiers.
ASUS Unveils Revolutionary ProArt PCs Powered by NVIDIA RTX Spark at Computex 2026
ASUS unveils the new ProArt P16, P14 laptops and ProArt Mini PC powered by NVIDIA RTX Spark at Computex 2026. Discover 1 petaflop AI performance, 128GB unified memory, Lumina Pro OLED displays, all-day battery life, and local AI agents launching fall 2026.
Black Friday Expands Beyond Retail into Media, AI Commerce, Advertising, and Entertainment Opportunities
MIAMI, Fla., June 1, 2026 (SEND2PRESS NEWSWIRE) — Black Friday, one of the most recognized names in global commerce, is continuing its evolution beyond traditional retail into a broader media,
Black Friday Expands Beyond Retail into Media, AI Commerce, Advertising, and Entertainment Opportunities
MIAMI, Fla., June 1, 2026 (SEND2PRESS NEWSWIRE) — Black Friday, one of the most recognized names in global commerce, is continuing its evolution beyond traditional retail into a broader media,
The Arsenal evolution, not revolution
The culmination of Mikel Arteta's 'process', which has now been well and truly 'trusted', may have reached a climax with the Premier League trophy and subsequent parade this weekend just gone. It is healthy, but Arteta needs to know who the key pillars are in his team. Two years ago, I would have said Martin Odegaard but I'm not so sure now.