SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " data " 7,793 found 🔀 AI-powered Shuffle
No country should have to build its digital health future alone – now none of them will
WHO/Europe and Healthcare Denmark have signed a memorandum of understanding (MoU) to accelerate cooperation on digital health, health data, artificial intelligence (AI) and health system innovation in the 53 countries of the WHO European Region.
Period pain: Simple shopping swap for better pain relief, study reveals
Many women are buying less effective pain medication for period cramps, supermarket data suggests.
The #1 pop song from the year you graduated high school
Stacker pulled data from Billboard's year-end charts to compile a list of the #1 pop song for each year from 1946 to 2024.
Historic Basila Frocks building transforms into hub for small businesses, art
Users' opinion of T-Mobile reaches a new low after bombshell discovery
T-Mobile users were surprised to learn what the carrier is doing with their data.
Americans are living longer, increasing the need of geriatricians. Does Louisiana have enough?
As the baby boomer generation reaches older adulthood and average lifespans continue to increase, the number of geriatricians needed to meet demand is also rising. Here's where the data currently stands in each state.
Congo says 782 Ebola cases confirmed, two new health zones affected
The number of confirmed Ebola cases in Democratic Republic of Congo has increased to 782 after 72 new cases were documented in 24 hours, one of the biggest single-day jumps during the ongoing outbreak, government data showed on Sunday.
Is SMIC N+3’s Metal Pitch Smaller than Intel 18A’s?
Almost four years ago, we published that SMIC had started shipping 7 nm (N+1) chips. Now, SMIC is shipping its third-generation 7 nm (N+3) process in Huawei’s Kirin 9030, with a minimum metal pitch of 32.5 nm, about 10% tighter than the 36 nm minimum metal pitch shipping in Intel’s latest Panther Lake CPUs on 18A. The headline is true, but incomplete cherry picked metric. N+3 reaches the density of TSMC N6 through aggressive DUV multi-patterning and design-technology co-optimization (DTCO), but it pays for that in complexity, efficiency and process control. We found this and more in our reverse engineering and teardown where we cover SMIC’s N3 process technology, Huawei’s packaging, memory, architecture, and more. SemiAnalysis has been building a state-of-the-art teardown lab in Oregon capable of analyzing the world’s most advanced and important chips over the last year and half. We have already generated revenue on advanced datacenter chip teardowns including our recent reverse engineering of a major TSMC customer’s COUPE CPO optical engine + EIC 3D stack. This is the first public report from the SemiAnalysis Teardown Engineering & Evaluation Lab, or STEEL for short. The lab is aggressively scaling up and out and we’re excited to announce it publicly. This is a bit of inconvenient timing for TechInsights as they are private equity owned and currently being sold while having enjoyed virtually no credible competition for decades. This has led to TechInsights underinvesting in CAPEX. SemiAnalysis exceeds TechInsights in revenue despite no venture or private equity ownership and being founded only 6 years ago. Because we have no external investors and are founder led, we move faster, build faster, and we can release client chip teardowns for free regularly, while focusing on datacenter for our major clients. Here’s the first public image from our lab, the HiSilicon Kirin 9030 Pro SoC: This report will detail our teardown of the Kirin 9030 and our findings on SMIC’s N+3 process, the most advanced in China. For comparison, we’ll show our teardown of the MediaTek Helio G99, made on TSMC N6. Through this comparison, we can look at the effect of export controls – SMIC N+3 and TSMC N6 are comparable nodes, but one is heavily export-controlled, the other free to use the West’s most advanced equipment. Here we see both China’s progress and constraints. SMIC N+3 reaches TSMC N6-class logic density, but it requires far more aggressive DUV multi-patterning, so it does not match N6 on process maturity or cost. The Kirin 9030 Pro performs similarly to three-year-old Android flagships, and trails far behind the current flagship SoCs from Apple, Qualcomm, MediaTek, and Samsung. The efficiency gap is even wider. Export controls have not stopped Huawei and SMIC from shipping advanced silicon, but they have forced a different path. Without EUV, SMIC is leaning harder on DUV multi-patterning, DTCO, and increasingly complex integration. The roadmap continues forward through tighter design rules and backside power, but each step adds cost and process risk. Huawei’s τ scaling and LogicFolding show another path: stacking active logic and recovering density through advanced packaging and system-technology co-optimization (STCO). To understand the Kirin 9030, we must first understand Huawei’s SoC history. HiSilicon is Huawei’s chip design arm, responsible for the Kirin smartphone SoCs, Kunpeng server CPUs, Ascend AI accelerators, and switch/router networking silicon. Before export controls, Huawei was TSMC’s largest customer – the only customer on TSMC’s first EUV node, N7+, and among the first on N5, alongside Apple. That ended in late 2020. Huawei switched to Qualcomm SoCs in its flagship smartphones, though export controls limited them to 4G-only variants. In late 2023, Huawei returned to in-house silicon with the Kirin 9000s, a successor to the Kirin 9000, fabricated on SMIC N+2 instead of TSMC N5. In the following years, they released the Kirin 9010 and 9020 on the same N+2 process. These chips used Huawei’s in-house TaiShan CPU cores and Maleoon GPU. We have not torn down a Kirin 9020 ourselves, so the predecessor die shot is from Kurnal. The die shots show how Huawei spent its silicon budget: which functional blocks are where, and how their areas compare to the predecessor. First, a quick guide to the major blocks on the die. The total die area is nearly identical, but the 9030 uses that area more aggressively. A denser process lets Huawei fit an extra middle CPU core, more GPU and NPU cores, and larger caches into the same footprint. In contrast, the Helio G99 is a much smaller, low-cost SoC, built for budget smartphones rather than a flagship device. While the Kirin 9030 is ~140 mm², the G99 is only ~29 mm², roughly one-fifth the area. The underlying TSMC process technology, however, is directly comparable as a baseline for analyzing SMIC’s. The Kirin 9030 is an evolutionary refresh, not a clean-sheet design. Its CPU, GPU and NPU cores carry over the 9020’s families, and the gains come from three levers: the SMIC N+2-to-N+3 process step, DTCO and floorplan work, and incremental microarchitecture. Area is where the first two show up, and the 9030 scales well here. Performance and efficiency are the harder test. Huawei’s design holds up better than its node would suggest, but the chip still trails, both because N+3 sits behind the leading-edge nodes and because its cores, while competent, remain a few generations behind the newest designs. The new prime core is an incremental update. The main changes are a 10% frequency increase from 2.5 GHz to 2.75 GHz and a doubling in the L2 cache from 1 MiB to 2 MiB. Despite the increased cache, the core size decreased by 7.6%. Excluding the private L2 cache, the core size decreased by 21%. This is a large reduction for an incremental node. Compared with the TaiShan New V120 core in the Kirin 9020, the Kirin 9030’s middle core is almost unchanged architecturally, yet each core shrinks by ~22%. Most of that comes from the move from N+2 to N+3, with layout likely accounting for the rest. Visually, the most noticeable change is the increase from 3 middle cores to 4. There is also a 20% increase in the shared L3 cache of the big cluster. This helps to improve multi-core performance without sacrificing much in terms of area. Even with each core shrinking, the big CPU cluster’s total area is essentially unchanged. The per-core savings went back into an additional middle core and larger caches. The tiny cores shrank less than the prime core (excluding its L2 cache) and less than the middle cores. This is likely because fixed overhead is a larger share on a small core. We cannot resolve any architectural changes from the die shot alone, but the per-clock and efficiency gains shown below point to more than pure process and layout scaling. The area reduction was offset by a doubling of the shared L2 cache from 2 MiB to 4 MiB, leaving the total tiny CPU cluster area slightly larger. Area is the easiest improvement to see from a die shot, but it is only one part of PPA (power, performance, area). For modern logic, power and performance matter just as much, and often more. Since Dennard scaling broke down in the mid-2000s, voltage and frequency have not scaled in step with transistor dimensions, so each node has had to fight harder for gains in performance and efficiency. The starkest comparison is not Kirin 9020 versus Kirin 9030 Pro. Apple’s efficiency cores run circles around Huawei’s prime core. Apple’s low-power core delivers 20% higher integer performance while drawing only 1 W, compared with 4.5 W for Huawei’s prime core. N+3 matches TSMC N6, but N6 is several generations old. Apple and Qualcomm build on N4 and N3P, which are denser and sit on a better voltage-frequency curve, giving them a larger transistor budget and more performance per watt. The 9030’s own cores did improve. The middle and tiny cores gained 17% and 14% in per-clock integer performance over the 9020, with floating-point flat on the middle core and up 11% on the tiny. The tiny core improves cleanly, with performance rising while power falls and efficiency increases by 45% in integer and 24% in floating point. The middle core is mixed: integer performance rises but power rises faster, cutting integer efficiency by 7%, while lower power lifts floating-point efficiency 16%. Per-clock gains at the same or lower frequency are microarchitectural, so the cores are tuned, not just shrunk. Both also failed to hold their rated maximum frequencies, pointing to thermal, power, or stability limits. Per clock, the middle core sits around Arm Cortex-A720 and the tiny core near the Cortex-A520; absolute performance trails because Huawei clocks them much lower. The prime core is roughly Cortex-X2 class per clock, a 2021 design. Apple’s 2020 M1 Firestorm core is still 35% higher per clock and 57% faster in absolute integer performance at a similar 4.5 W. The current leading edge is further ahead again: the Apple M5 P-core is 60% higher per clock and 2.7× faster, the Arm C1 Ultra 45% higher and 2× faster. Matching older high-end cores per clock is a genuine design achievement. What Huawei cannot match is the voltage-frequency curve and transistor budget of leading-edge nodes, which let Apple, Qualcomm and others spend more transistors in the same area on wider cores, larger caches and deeper buffers while running at lower voltage. Huawei’s LogicFolding roadmap is one answer, stacking active logic to recover density and shorten signal paths. We return to it later. The GPU compute units (CUs) changed more visibly than the CPU cores, moving to a more rectangular layout for both the arithmetic logic unit (ALU) clusters and the CU overall. Even with ray-tracing support added, a CU shrank ~28%. However, that shrink is offset by the increase from 4 to 6 CUs and the area outside the CUs grew 33%. Overall, the GPU cluster is larger by ~10%. The GPU is where Huawei makes its biggest gains. The Maleoon 935 is not competitive with current flagships, but it is a large step up from the 920 and reaches older-flagship territory. In 3DMark it is 70% faster in Wild Life Extreme (WLE) and 79% faster in Steel Nomad Light (SNL) than the 920; with 11% higher clocks and 50% more CUs, the ~67% theoretical uplift roughly matches WLE and is beaten by SNL. It edges ahead of the Snapdragon 8+ Gen 1 in WLE and SNL, and the Dimensity 9200 and Apple A16 in WLE, but stays far behind newer parts: the Snapdragon 8 Elite Gen 5 and Dimensity 9500 are ~2.4–2.6× faster in WLE and ~3.2× faster in SNL. The Maleoon 935 is Huawei’s first GPU with hardware-accelerated ray tracing; there it lands slightly ahead of the Exynos 2200, and on par with the Apple A16, with current flagships up to 3.7× faster. The Neural Processing Unit (NPU) saw the largest structural changes of any block, moving from a Lite and a Tiny core in the Kirin 9020 to a Lite and two Tiny cores in the Kirin 9030. Both core types also show significant layout changes. This is a reversal in Huawei’s NPU design. The Kirin 9000 5G, its last flagship chip on TSMC N5, used two Lite and one Tiny core. The series of SoCs on SMIC N+2 moved to one Lite and one Tiny core, likely for area savings. With the Kirin 9030, Huawei has shifted back toward a larger multi-core NPU cluster, but with the additional area going to a Tiny core rather than a Lite core. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Before diving into the process stack, the package and memory are worth separating from the SoC itself. The Pro variant of the Kirin 9030 carries 12 GB of Samsung DRAM, with two stacks of four dies each. The dies were identified as the K4L2E165YD, a 12 Gb LPDDR5X-9600 device fabricated on Samsung’s 1a node, the fourth generation of its 10 nm-class DRAM after 1x, 1y and 1z. 1a has shipped in volume since 2022, so this is current memory rather than older-node inventory. The 16 GB Pro Max variants we obtained were found with both CXMT and Samsung packages. The CXMT package is marked CXDD7JEDM, with two stacks of four dies, packaged in week 45 of 2025. The inferred die dimensions from X-ray computed tomography (CT) are consistent with a known density of ~0.3 Gib/mm² for the CXMT G4 process, roughly equivalent to other manufacturers’ 1z processes. The Kirin 9030 uses a typical integrated package-on-package (iPoP) stack: multiple DRAM dies in a memory package sit above an organic redistribution layer (RDL) interposer, which sits above the SoC and package substrate. The full package is then mounted to the printed circuit board (PCB) through ball-grid array (BGA) solder bumps. The memory package substrate is a thin bismaleimide-triazine (BT) laminate carrying the LPDDR5X stack. The organic RDL interposer over the SoC routes the PoP signals around the die and carries possible dummy thermal copper pillars. The package substrate, a thicker Ajinomoto Build-up Film (ABF) build-up over a BT core, fans the flip-chip bumps out to BGA pitch and embeds the power planes. The whole stack is organic. The only silicon is the SoC and the LPDDR5X dies; there is no silicon interposer. Keeping it all-organic brings the package’s coefficient of thermal expansion (CTE) close to the PCB’s, reducing board-level warpage, and avoids the cost of a silicon interposer the SoC’s bandwidth does not need. In an iPoP stack, the memory package connects to the organic RDL interposer through an array of solder bumps. Underfill fills the gap around those bumps, adding stiffness and protecting the joints from mechanical stress. The Pro and Pro Max variants differ here, which we cover behind the paywall. The die shot and architecture tell us how Huawei allocated its silicon budget. The process tells us what SMIC can manufacture. We use the Helio G99 as the process reference for TSMC N6. Both SMIC N+3 and TSMC N6 are evolutions of previous 7 nm-class nodes. We used targeted TEM cross-sections through logic and memory regions, imaged in both fin-cut and gate-cut directions. Each cross-section caption gives its horizontal field width (HFW), the real width of the imaged area. We start at the transistor fins, then move up through standard cells, local interconnect, and SRAM. SMIC has not overtaken Intel or TSMC. It uses aggressive DUV scaling and DTCO to reach N6-class density, but that density doesn’t translate into comparable performance and efficiency, for two reasons: the node gap to leading-edge nodes, and Huawei’s core designs. Fin Profile One of the most important knobs in a FinFET process is the fin profile: the shape of an individual fin and the channel where current passes from source to drain. The ideal fin is tall, narrow, and nearly vertical. A taller fin increases effective channel width, while a narrower fin improves electrostatic control by thinning the body the gate must control. Push either too far, and the process pays for it: weaker drive current, fragile fins, taper, footing and line-edge variation that hit yield and device variability. The Intel 22 nm, 14 nm, and 10 nm fin cross-sections show how FinFET nodes have improved over time. 22 nm fins were a first-generation structure, relatively short, wide and strongly tapered. The shape limits current density and reduces gate control uniformity across the height of the fin. At 14 nm and 10 nm, Intel pushed the fins taller and narrower while also making the sidewalls more vertical. Rather than shrinking the device, these changes increase the effective channel width per fin and improve electrostatic control. The trade-off is that taller fins at tighter pitches are much more difficult to manufacture. Now, let’s compare the Helio G99 on TSMC N6 with the Kirin 9030 on SMIC N+3. Both processes are in the same class, with fin pitch of 30-32 nm on N+3 and 34 nm in our N6 cross-section. The pitch for N6 is especially interesting as N7’s HD library is generally listed with a 33 nm fin pitch, and N6 did not shrink pitches directly. Its density gains came from DTCO instead of tighter pitches. The 34 nm pitch was stable across our sampled region and serves more as a comparison against the SMIC N+3 we have not investigated further. Pinning down N+3’s fin patterning scheme takes more than one core unit. The CPU cores show a dense ~32 nm pitch, with the pitch between N-P fin pairs alternating between 78 and 88 nm. Logic alone may be consistent with dual-pitch mandrels of 120 and 110 nm, but this is a complex and unusual approach. Combining the pitch from the the 8T SRAM, which has more complex repeat unit, with the CPU core sequence allows us to reverse engineer the patterning steps with more confidence. As both the logic and SRAM should share the same base grid, a single CD mandrel lithography pattern with 128 nm pitch undergoing SAQP produces a die-wide ~32 nm grid (128 nm/4), which supports the pitch sequencing seen in both logic and SRAM cells. In the sampled cross-sections, N+3 shows a taller, narrower, higher-aspect-ratio fin than N6. The measured fin aspect ratio is ~9.5:1 on N+3 versus 7.8:1 on N6. N+3 also shows less top rounding, with an estimated radius of ~2 nm, compared with 2.8 nm on N6. Even though the fin widths differ, the ratio of top rounding to fin width tells the same story, with N+3 at 0.37 and N6 at 0.44. In a geometric sense, lower is better; a perfectly rectangular fin would have no top-rounding penalty. These are single-digit-nanometer features measured from a handful of cuts, so treat the absolute numbers as approximate. The important result is the relative gap: N+3’s fins are consistently taller, narrower and less rounded than N6’s. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Standard Cell A standard cell is the basic building block of chip layout: a fixed-height row pairing one NMOS and one PMOS transistor that share a gate, tiled in a grid to build logic blocks. The key dimensions are contacted gate pitch (CGP), cell height (CH), fin count, and the lower-metal routing grid. To measure density, we use the Bohr metric: a weighted average of NAND2 gate area (60%) and scan flip-flop area (40%). This represents a realistic mix of combinational and sequential logic. This metric has its limitations, especially for complex cell layouts like TSMC’s FinFLEX, which alternates cells with different fin counts. Even so, it is the best metric for a pure process-level comparison. Another important measurement is the fin pitch; it refers to the distance between two fins of the same transistor. In a FinFET process, multiple fins are used in each transistor to increase the drive current and thus performance. TSMC N6 ships both a high-density (HD) library with 2 PMOS and 2 NMOS fins per cell, and a high-performance (HP) library with 3 of each. More fins under the shared gate mean more effective channel width. HP cells switch harder at the cost of area. Designers mix the two on a die, primarily spending HP cells on timing-critical paths, and matching their PPA targets. In the Cortex-A55 core of the Helio G99, we found a cell height of 240 nm for the HD cell. MediaTek has used HD cells in the G99 to minimize die size and thus cost. As an SoC for budget smartphones at ~$100, this is essential. By contrast, we found only one library in the Kirin 9030, with 2 NMOS and 2 PMOS fins. This suggests a narrower library strategy than TSMC N6, where both HD and HP libraries are widely used. This likely reflects the smaller customer base and the more constrained domestic design and electronic design automation (EDA) ecosystem. In all three CPU cores of the Kirin 9030, we found cell heights of 228 nm, 5% smaller than on N6. This is also a reduction of 9.5% over SMIC N+2’s cell height of 252 nm. SMIC N+3 and TSMC N6’s HD library both feature a CGP of 57 nm. For SMIC, this is a 9.5% shrink over N+2. In the past, CGP and cell height alone may have been enough to compare transistor density. Now, however, we must consider scaling boosters and DTCO as well. SMIC’s density gain does not come from EUV. It comes from using every available DTCO booster aggressively. First is fin depopulation: reducing the number of NMOS and PMOS fins in each cell. The first FinFET nodes started with 3 or 4 fins for each transistor. SMIC N+3 and TSMC N6 HD both use only 2 fins per transistor, trading drive strength for density. Next is contact over active gate (COAG). By landing the gate contact directly over the active gate, instead of out over the isolation region, the cell height drops. N+3 integrates COAG while N6 does not. Our N+3 gate-cut cross-sections indicate COAG, with the gate contact sitting over the active region, while N6 shows an off-gate contact. Last is single diffusion break (SDB). Diffusion breaks are inserted between cells in the same row to provide electrical isolation, but they also introduce local layout effects (LLE), layout-dependent shifts in electrical characteristics. In the past, a double diffusion break was used, consuming the space of two CGPs. SMIC N+3 and TSMC N6 instead use SDB, saving area but increasing LLE sensitivity. This must be controlled at the process level and accurately modeled in the process design kit (PDK) so that EDA tools can account for it. Overall, SMIC N+3 has a transistor density of 113.4 MTr/mm², slightly above TSMC N6 at 107.7 MTr/mm². Even without EUV, SMIC has achieved density beyond TSMC’s mature N6 node which utilizes EUV. Metal Stack The smallest critical dimension in the teardown is M0; SMIC N+3 uses a 32.5 nm local metal pitch. That is smaller than the 36 nm M0 pitch on Intel 18A in Panther Lake. However, this does not mean that SMIC has a better process than Intel 18A or TSMC N3P. M0 is a local intra-cell routing layer. Its usefulness depends on the full interconnect stack: M1 and M2 pitch, track count, via and line resistance, design rules, mask count, overlay control, and routing flexibility. The 32.5 nm M0 is consistent with self-aligned quadruple patterning (SAQP), whose four-population line-width loading we read coarsely as alternating widths of 21.5 to 24 nm; M1 and M2, at 38 and 40 nm, are consistent with self-aligned double patterning (SADP), a single A/B split. On TSMC N6, M0, M2, and M3 sit at a relaxed ~40 nm and are consistent with SADP-class double patterning, with no need for quadruple patterning. That said, we measure M2 for example at ~43 nm, likely inflated by sparse routing. We do not assign any specific layer to EUV from our cross-sections; the distinction we can draw is double versus quadruple patterning, not lithography wavelength. Transistor-level density in the front-end-of-line (FEOL) sets an upper bound, but the design is ultimately limited by what the interconnect stack can route. The lowest metals are the most important for standard-cell density, but the semi-global and global layers determine how usable that density is at the block and chip level. Two axes are commonly used for chip cross-sections: the fin-cut and the gate-cut. The micrograph above is a fin-cut and shows metals 0 through 3. This axis lets us see the even-numbered metals, with M0 right above the fins. There are two kinds of M0 lines. The first are the power rails; these are wide wires for the VDD and VSS running horizontally at the top and bottom edges of each standard cell. The wide wires measure 55 nm across, more than double the other M0 lines. Their width minimizes resistance and reduces IR drop. The second kind are intra-cell wires, short segments within the cell that connect terminals to M1. These have alternating widths between 21.5 and 24 nm. The M0 pitch is 32.5 nm, a 19% reduction versus N+2 and N6. At this pitch, DUV patterning requires more aggressive multi-patterning, increasing mask count, overlay sensitivity, process complexity and cost. M0 is below what a single DUV-defined spacer (SADP) can resolve, so SMIC cascades a second spacer step (SAQP). The cross-section reflects the cost: the M0 trenches are visibly more re-entrant (narrower at the bottom than the top) than M1 or M2 on the same chip and carry a bright barrier-rich foot where the trench meets the etch-stop layer. That shape is partly the intended damascene profile, as a slightly narrow bottom helps void-free copper fill, but its magnitude at M0 is driven by the tight pitch and the higher trench aspect ratio. Intel 18A supports an M0 pitch of 32 nm, although Panther Lake has only shipped with a looser 36 nm pitch. This is due to Intel’s heavy usage of HP libraries. Among leading-edge nodes, 18A has the loosest M0 pitches due to PowerVia. With power routing moving to the backside, congestion is reduced, and the entire front-side metal stack can be used for signal routing. M2 is the first true inter-cell routing layer. It runs horizontally like M0 but spans across multiple cells to carry block-level signals. The M2 pitch sets the cell’s track height – the number of M2 tracks that fit between the VDD and VSS rails, defining what the library calls a 6-track or 7.5-track cell. This layer is the most important, limiting the routing of entire blocks. SMIC N+3 features a 5.7-track cell. The M2 pitch is 40 nm, a 5% decrease over N+2 and the same as N6. This shrink keeps the pitch at the edge of what is possible with double patterning. Future nodes will need to increase the number of masks for M2 as reducing the number of tracks is much harder due to the limitations in routing. The micrograph above is in the perpendicular direction, the gate-cut, and shows metals 0 through 4. This allows us to see and measure the odd-numbered vertical metal layers. The M1 pitch is 38 nm, 9.5% less than N+2 and 33% less than N6. The M1-to-gate ratio matters because it sets local routing flexibility. N+2 and N+3 use a 3:2 ratio, while N6 uses a 1:1 ratio, explaining the huge differences in M1 pitch. The more M1 lines there are compared with the gates, the more flexibility there is for power and signal crossing within the cell. Routing flexibility enables more complex and better cells. Clean fractional ratios are also preferred as a grid is periodic and improves layouts. The 3:2 ratio gives SMIC more local routing flexibility than a strict 1:1 grid, but it also complicates layout and patterning. This is a DTCO choice, with SMIC increasing process complexity to recover density and routability without EUV. This 3:2 ratio is not very popular in the leading-edge nodes. TSMC has only used it on N7+, the N5 family, and the short-lived N3(B). They have switched back to a 1:1 ratio for N3E. Intel has only used it on the 10 nm/Intel 7 family, with Intel 4, 3 and 18A all using a 1:1 ratio. Samsung is the only one still using a 3:2 ratio at the leading edge, using it in the SF4 and SF3 families. It remains to be seen if SMIC will remain at a 3:2 ratio or move to a 1:1 ratio with its future nodes. The industry is still actively exploring these local-routing ratios. At VLSI 2026, imec will be presenting work on even higher ratios, including a 2:1 scheme that can reduce area by up to 14%. We will be covering the conference in a future newsletter article. Subscribe We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. The final local interconnect layer for N+3 is M3, with a pitch of 44 nm. The M3 pitch is the same as on N+2 and 10% larger than on N6. The semi-global layers carry the majority of block-level signal routing. They have a coarser pitch than the lower local layers. On leading-edge nodes, they are designed to sit at the limit of DUV single patterning. M4 through M11 pitches were found divided between 80–82 nm (M4–M6), 128 nm (M7–M10), and 148 nm (M11). Given limited sampling, it is possible these are divided further in dense routing areas. At the top are two giant metal layers, M12 and M13. These have kept the same pitches as N+2 at 1920 nm and 4600 nm respectively. While the lower layers’ pitches are generally fixed by the process and library, the upper layers vary much more in pitch and count, depending on the design. Even two smartphone SoCs on the same process can have wildly different metal stacks. The Helio G99 carries fewer routing layers, reaching coarse metal pitches of 850 nm by M9, while the larger and higher-performance Kirin 9030 keeps fine pitches until M11. SRAM At the leading edge, SRAM is much more difficult to scale than logic. TSMC’s latest nodes have seen little to no bitcell scaling, while logic still has more DTCO levers to pull. While looking for other logic libraries in the GPU compute units, we stumbled upon the SRAM. The most common type of SRAM has 6 transistors (6T), but this cell had 8 transistors (8T) instead. 8T SRAM adds two transistors to form a dedicated read port. Unlike a 6T cell, where reading disturbs the storage, the decoupled read port removes read-disturb, improving read stability and letting the cell be pushed harder for performance. At first glance, the cut looked like an unusual logic library, with each cell row having 3 fins of one polarity and 5 fins of another. The rows also alternated in orientation. Energy-dispersive X-ray spectroscopy (EDS) resolved our confusion. The cut had not landed on the GPU logic, but on the SRAM macro beside it. The unusual fin pattern was due to the SRAM library. We return to EDS in the process flow analysis behind the paywall. SRAM libraries are not like traditional logic libraries. Due to the unequal number of PMOS and NMOS transistors, they require specialized rules and layout libraries. They do not need the flexibility of logic libraries, so they are hyper-optimized for one purpose: dense, reliable memory. The SRAM cell we found is a 1:2:2-2:2 cell. This means there is 1 fin per pull-up (PU) PMOS transistor, and 2 fins per pull-down (PD) and pass-gate (PG) NMOS transistor. These 2 PU, 2 PD and 2 PG transistors would usually form a single 6T high-current cell (HCC). An 8T HCC adds a read-pull-down (RPD) and a read-pass-gate (RPG) NMOS transistor, each with two fins. We measured a cell height of 406 nm, which brings the bitcell size to 0.0463 µm². That is a theoretical peak density of 21.6 Mib/mm². We estimate that a 6T HCC would have a cell height of 292 nm and a size of 0.0337 µm². This is ~12% larger than a 6T HCC on Intel 3 and 4. We also estimate the 6T high-density cell (HDC) to have a cell height of 228 nm and a size of 0.0260 µm². This is coincidentally the same as the logic standard-cell height measured earlier. The estimate puts the cell near Samsung 7LPP/5LPP and slightly below TSMC N7/N6. That is a theoretical peak density of 38.5 Mib/mm². 6T HDC is arguably the most important cell as it is used for the largest caches in a chip, the L3 caches and system-level cache (SLC). Both the Kirin 9020 and 9030 have split the SLC into 4 banks to raise total SLC bandwidth. In the Kirin 9030, the SLC increased from 2 MiB to 3 MiB per bank. Correspondingly, the number of arrays within the bank also increased by 50%, from 16 to 24. Each array can store 128 KiB and forms an orderly pattern on the die shot. From the Kirin 9020 to the Kirin 9030, the area of a 128 KiB SLC array decreased from 0.0477 mm² to 0.0392 mm², an 18% shrink. The achieved density is 25.5 Mib/mm², 66% of the theoretical maximum. While the SLC was quite similar across both chips, the L3 has seen some major changes, particularly in terms of its layout. The total capacity also went up from 10 MiB to 12 MiB. Much like the SLC, the L3 is also split into 4 banks. In the Kirin 9020, an L3 bank consisted of 16× 128 KiB arrays and 16× 32 KiB arrays. However, an L3 bank in the Kirin 9030 instead consists of 48× 64 KiB arrays. In the Kirin 9020 L3, a 128 KiB array was 0.0513 mm² and a 32 KiB array was 0.0154 mm². The size of the 128 KiB array is different on the L3 and SLC as the assist circuitry for the two arrays differs depending on their purpose. In the Kirin 9030 L3, a 64 KiB array is 0.0210 mm². Although not a like-for-like comparison, normalized for capacity, it is 18% smaller than the 9020’s 128 KiB L3 array and 31% smaller than its 32 KiB L3 array. The achieved density is slightly lower than the SLC, at 23.8 Mib/mm², 62% of the theoretical maximum. Unlike the L3 and SLC, the prime cores’ private L2 cache uses a 2-bank design. As the prime cores’ L2 is latency-critical, it likely uses 6T HCC instead of 6T HDC. The 9020 has 16 arrays in each bank while the 9030 has 32. Each array has a capacity of 32 KiB. A 32 KiB array in the L2 shrank from 0.0171 mm² to 0.0142 mm², ~17% smaller. The density is 17.6 Mib/mm², ~59% of the theoretical maximum for 6T HCC. SRAM scaled well from N+2 to N+3, shrinking by ~19%, close to the theoretical logic shrink. The caveat is that N+2’s bitcells were unusually large, bigger than comparable 7 nm-class nodes, so part of the gain is catch-up rather than true scaling. With the insights from STEEL’s teardowns, we will be doing a deep dive into SRAM in a future newsletter article. Subscribe Everything above came out of a single STEEL teardown: die annotation, block-level area analysis and TEM cross-sections through logic and SRAM. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Future Roadmap The same cross-sections that pin down N+3 also show where SMIC can go next. Although N+3 is already close to the practical limits of DUV multi-patterning in several layers, SMIC still has a few scaling levers left. A theoretical N+4 would likely start with cell height. N+3 uses 5 M0 tracks between its power rails. Moving to 4 M0 tracks, as on SMIC N+2 and TSMC N6, could reduce cell height by roughly 15%. The routing grid is only one side of the shrink; the front end also must fit into the smaller cell. One possible FEOL lever is reducing the p-to-n isolation spacing from two diffusion grid units to one. Intel used this scaling booster on Intel 4, and TSMC did so on its N3 family. This path trades layout flexibility for density. Fewer M0 tracks reduce local routing resources, while tighter p-to-n spacing raises integration and design-rule difficulty. M2 is also constrained by the cell height shrink. For SMIC to maintain a ~5.7-track cell, M2 would need to move toward ~35 nm. That would move another layer into SAQP territory. SMIC could also reduce the CGP from 57 nm to 54 nm. Intel reached a similar CGP on Intel 10 nm/Intel 7 without EUV. The local interconnect is also tougher. If SMIC keeps the 3:2 M1-to-gate ratio, M1 would need to shrink to 36 nm and would likely require SAQP as well. If SMIC moves to a 1:1 ratio, M1 could relax to 54 nm, but it would give up routing flexibility. Under this theoretical path, we estimate that SMIC N+4 could reach a cell height of 198 nm and a CGP of 54 nm, implying a Bohr density of 137.8 MTr/mm², on par with TSMC N5 or Samsung SF4. However, the difficulty is cumulative. Each step is individually plausible, but together they make N+4 harder than the transition from N+2 to N+3. It will likely take longer, cost more, and carry less process margin. A theoretical N+5 would require a larger integration shift. One possible path is backside contacts (BSCon), moving power routing and source/drain contacts to the backside, which would reduce front-side routing pressure and enable another reduction in cell height. The front-side metal pitches could relax to reduce the process complexity. M0 would likely relax slightly to ~34 nm, and M2 and M4 pitches could relax further. CGP is unlikely to shrink much further. Even with EUV, 48 nm has been the practical limit for yield and process control. This approach would allow N+5’s cell height to fall to 170 nm and its CGP to 53 nm. This implies a Bohr density of 163.6 MTr/mm², on par with Intel 18A’s HP library. However, this would not make N+5 cost-competitive with the leading edge. It would reach a similar density through a much more expensive route. The integration difficulty rises sharply, with new process flows for backside alignment, wafer thinning, contact reveal, and backside metallization. Past this point, standard density and interconnect scaling become increasingly unattractive. That is where Huawei’s roadmap stops looking like a normal foundry roadmap and starts looking like a packaging roadmap. At ISCAS 2026, Huawei unveiled its tau (τ) scaling law, reframing process scaling in the time domain. τ is the time cost of data movement and processing: switching delays in transistors, RC signal propagation delays in circuits, compute, memory, and networking latency. Outside Huawei’s terminology, this is called system-technology co-optimization. This is Huawei’s answer to its lack of EUV lithography. Without EUV, planar density cannot keep pace with TSMC, Intel, or Samsung. If transistor density cannot shrink further, Huawei’s alternative is to shorten wires, reduce buffering, and stack logic vertically. “LogicFolding”, Huawei’s implementation of this new scaling idea, is, in practice, an aggressive 3D stacking approach. AMD V-Cache places SRAM above or below a CPU die. AMD’s MI350X places active interposer dies (AIDs) underneath accelerator and compute dies (XCDs), with the AIDs handling cache, IO interfaces, the network-on-chip (NoC) and embedded metal-insulator-metal (MIM) capacitors. With LogicFolding, parts of the same logic block are split across multiple active dies bonded face-to-face at ultra-fine pitch. This allows Huawei to shorten some critical paths and reduce buffer overhead, not merely add cache capacity or offload the IO and interconnect. Shortening wires is where the higher clocks come from. A large share of a modern core’s delay and energy budget goes into driving long interconnects and the repeater buffers along them. LogicFolding distributes a block’s critical-path gates across multiple stacked tiers bonded at a very fine pitch, so the bond interface behaves like an additional metal layer and the longest paths get shorter. That is how Huawei expects to recover frequency and efficiency it cannot get from the process alone. Huawei’s roadmap shows its intent. Prime core frequency is targeted to rise from 2.75 GHz in the Kirin 9030 to roughly 5 GHz by 2031, far beyond what planar scaling alone could deliver. Prime cores with 3.1 and 3.39 GHz clocks are being tested in its labs, although their power consumption is unknown. Beyond that, chips are in the design, simulation or pathfinding phase, meaning the frequencies are targets. However, the direction matters more: LogicFolding also helps with performance, not just density. The catch is that Huawei’s density claim is not directly comparable to foundry densities. A stacked design can report more transistors per package footprint by adding active layers, even if each patterned die remains well behind TSMC or Intel in front-end density. This is how Huawei can claim to reach foundry 14A-equivalent density by 2031. This is not a like-for-like foundry comparison, with Huawei using stacked logic and measuring density per package footprint. On a normalized Bohr-density basis, SMIC N+3 is ~114 MTr/mm², 38% less than Intel 18A’s HD library. Huawei’s 3D roadmap closes the gap by stacking active logic, reaching 215 MTr/mm² by 2030. In 2031, the roadmap density jumps to 295 MTr/mm², implying either a third active layer, partial EUV insertion or aggressive planar DUV scaling. Huawei’s methodology makes other foundries look much denser as well. Applying it to AMD’s MI450X with an N2 top die on an N3P base die yields a theoretical density of 460.2 MTr/mm² in 2026, compared with Huawei’s 295 MTr/mm² in 2031. This Kirin 9030 does not use LogicFolding, remaining in a conventional mobile SoC package. Instead, it forms the baseline for how far Huawei and SMIC can push planar scaling. Future teardowns of Kirin and Ascend chips will show both planar logic density and Huawei’s hybrid bonding solutions. Export controls changed China’s optimization problem rather than ending it. EUV restrictions raised the cost and complexity of leading-edge manufacturing without freezing it. SMIC reaches N6-class logic density through DUV immersion, SAQP and DTCO, while Huawei shifts more of the burden onto architecture, packaging and system-level integration. Future nodes will be tougher. N+3 still had room to tighten local metals and reduce cell height and CGP. Further scaling without EUV leaves fewer levers. More aggressive multi-patterning adds masks and overlay error. SMIC can keep pushing DUV, but each step will get more expensive and less forgiving. The design side is just as critical. Huawei had domestic EDA tools and flows before the Kirin 9030, with the Kirin 9000s, 9010 and 9020 making that clear. Huawei was able to ship multiple consumer SoCs on SMIC N+2 and N+3 while cut off from the Western EDA stack. US export controls restricted EDA tools for advanced chips in 2022 but did not target tools for more mature chips. In 2025, the US government briefly placed much broader restrictions on EDA software from Synopsys, Cadence, and others, before lifting them less than two months later as part of a trade deal tied to rare earths. Huawei has been unable to access those tools because it remains on a US trade blacklist. That forced Huawei, SMIC and Chinese academic institutions to build their own tools and flows. Researchers at Peking University recently announced a prototype EDA tool for Huawei’s LogicFolding architecture, which requires a new flow to handle the multilayer layout and floorplan. This is not the same as replacing the full Synopsys or Cadence stack, but it shows where domestic EDA is headed: toward tighter co-optimization between architecture, process and packaging. These advances are also diffusing into the Chinese ecosystem. SMIC is licensing its N+2 and N+3 processes to HLMC/Hua Hong at the government’s direction rather than by choice. If the same process learning feeds into Ascend accelerators for AI training and inference, the choke point shifts from one named fab to an ecosystem. Alibaba’s T-Head silicon arm and Cambricon, a Chinese AI chip designer that is expected to supply ByteDance, could also be major beneficiaries. Sanctions aimed at SMIC alone become less effective once the manufacturing knowledge has spread to other fabs and design houses. China is not closing the gap with Intel, Samsung and TSMC. The teardown shows the opposite in several places: no EUV, no backside power, higher process complexity, and visible trade-offs. But China is still advancing. If domestic chips become good enough for phones, inference, networking and security-sensitive workloads, they can matter strategically without matching TSMC at the leading edge. Behind the paywall, we show what else STEEL can do, with material and process flow analysis of SMIC N+3, and analysis of the Kirin 9030 package. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline, access the full Kirin 9030 and SMIC N+3 analysis or to commission a custom teardown, contact sales@semianalysis.com.
4 Lines You Should Include in Your Claude Skill
Without these, Claude will be confidently wrong.
Steven Spielberg's 'Disclosure Day' opens No. 1, while 'Obsession' sensation continues
Steven Spielberg’s “Disclosure Day,” billed as his first popcorn movie in years, launched with $44 million in domestic theaters.
25 best whodunit movies in movie history, according to fans
Stacker compiled data on the top whodunit movies and ranked them by IMDb user ratings, with any ties being broken by votes. To qualify, the plot of the film had
25 best whodunit movies in movie history, according to fans
Stacker compiled data on the top whodunit movies and ranked them by IMDb user ratings, with any ties being broken by votes. To qualify, the plot of the film had
25 best whodunit movies in movie history, according to fans
Stacker compiled data on the top whodunit movies and ranked them by IMDb user ratings, with any ties being broken by votes. To qualify, the plot of the film had
Samsung Galaxy S27 and Xiaomi 18 spotted: Major Leica camera lineup changes expected
Months before launch, early traces of two of next year's likely most important camera flagship rivals have appeared in databases. Model numbers have been discovered for both the Samsung Galaxy S27 and an initial Xiaomi 18 model, with major changes to the lineup becoming apparent for the latter in particular.
The 50 greatest actors in movie history, according to fans
To determine American audiences' 50 favorite actors who are men, Stacker analyzed data from YouGov, current as of June 2024. See who came out on top!
The 50 greatest actors in movie history, according to fans
To determine American audiences' 50 favorite actors who are men, Stacker analyzed data from YouGov, current as of June 2024. See who came out on top!
Donald Trump turns 80 and celebrates with UFC cage fighting on the White House lawn
President Donald Trump turns 80 on Sunday and celebrates with a unique event: cage fighting on the White House lawn.
Devoted dads and citizen science: the evolution of parental care in harvestmen is uncovered
Citizen science data from popular platform iNaturalist has helped uncover the evolution of parental guarding behaviour in harvestmen, as shown in research published in the Zoological Journal of the Linnean Society.
Interpretable AI in materials discovery: Uncovering how models make predictions
A method to interpret artificial intelligence (AI) models used in materials discovery by analyzing their learned features has been developed by researchers from Japan. The method extracts key features from an AI model trained on atomic structural data and optical absorption spectra, and then groups materials with similar structural and spectral characteristics. This approach can be extended to reveal how atomic arrangements influence other material properties, paving the way for more efficient materials design.
A layoff from Meta made this data scientist rethink her career path
A Meta layoff made this 24-year-old data scientist rethink job security and her future at large companies in the age of AI.
Mapped: Where data centers are facing bans and moratoriums
Many Americans are resisting data centers across the country. Now, some lawmakers are responding with temporary moratoriums and outright bans.
Double The VRAM Of An RTX 3070
Modern games are quite often limited by the amount of volatile memory available to the GPU. Games can require many gigabytes of data during the rasterization process. So the obvious solution for be…
Mainers are turning to plants for health care as conventional treatment is harder to get
Maine companies sell herbal supplements, tinctures and other products made from plants, and Mainers also make their own products at home.
Trump turns 80 with a showstopping spectacle of cage fights at the White House. But big issues loom
President Donald Trump celebrates turning 80 with a UFC cage-fighting event on the White House's South Lawn.
Trump turns 80 with a showstopping spectacle of cage fights at the White House. But big issues loom
President Donald Trump celebrates turning 80 with a UFC cage-fighting event on the White House's South Lawn.
Tuberville faces renewed residency challenge in run for Alabama governor
Alabama Republican Party leaders will hold a hearing Sunday on whether U.S. Sen. Tommy Tuberville meets the residency requirement to run for governor.
People taking GLP-1 weight loss drugs like Ozempic started moving less
People taking popular weight-loss drugs such as Ozempic, Wegovy, Mounjaro, and Zepbound may be losing pounds, but they could also be moving less. Researchers analyzing Fitbit data found that daily step counts and exercise levels dropped after people started these medications, despite successful weight loss. Because the drugs can reduce muscle mass along with fat, the decline in physical activity raises concerns about preserving strength and long-term health.
The data center boom is colliding with the midterms
The majority of competitive House districts have data centers either planned or under construction, a POLITICO analysis shows.
Trump names James M. McDonald to lead powerful New York federal prosecutor's office
President Donald Trump has nominated James M.
SBA moves to revise 8(a) rules while preserving tribal, ANC eligibility
Details By Brian Edwards Native Contracting June 13, 2026 The U.S. Small Business Administration has proposed changes to its 8(a) Business Development Program that would eliminate race-based presumptions of social disadvantage for individually owned businesses while leaving eligibility standards unchanged for tribally owned enterprises, Alaska Native corporations and other Native entity-owned participants. In both the title and summary of the proposed rule published in the Federal Register, SBA emphasized that the changes only apply to individually owned firms and “do not impact entity-owned firms,” including tribes, Alaska Native corporation, Native Hawaiian organizations and community development corporations. The proposed rule, announced June 11, would require all individual applicants seeking admission to the 8(a) program to submit evidence demonstrating social disadvantage. Membership in a racial or ethnic group alone would no longer establish eligibility, according to the SBA. For Indian Country, the agency said eligibility standards for businesses owned by federally recognized tribes, Alaska Native corporations, Native Hawaiian organizations and community development corporations would remain unchanged. The proposal comes after the Department of Defense reaffirmed that participation by tribes and Alaska Native corporations in the 8(a) program is based on their political status under federal law rather than diversity, equity and inclusion initiatives. In a May 28 letter to Alaska's Republican Sens. Lisa Murkowski and Dan Sullivan, Under Secretary of Defense for Acquisition and Sustainment Michael P. Duffey wrote that participation by federally recognized tribes and Alaska Native corporations in federal programs is “grounded in their political status as Native Americans, not DEI initiatives.” The SBA proposal follows a 2023 federal court ruling that found unconstitutional the program's rebuttable presumption that members of certain racial and ethnic groups were socially disadvantaged. SBA Administrator Kelly Loeffler said the proposed rule would establish a single standard for individually owned applicants by requiring evidence of social disadvantage. The 8(a) Business Development Program provides participating firms with business development assistance and access to federal set-aside and sole-source contracting opportunities. The program remains a major source of federal contracting revenue for tribal enterprises and Alaska Native corporations. Native-owned firms received $16.1 billion of the program's approximately $26 billion in federal contract awards during fiscal 2024, according to data previously reported by Tribal Business News. The proposal also arrives amid ongoing concerns from Native contractors about SBA administration of the program. In May, the Native American Contractors Association and 53 Native-owned businesses urged SBA to address delays in processing 8(a) applications, saying some reviews had stretched beyond regulatory deadlines and appeared to have stalled since August 2025. The proposed rule is open for public comment through July 13. The Federal Register notice does not reference tribal consultation or indicate whether SBA determined consultation was unnecessary because tribal eligibility standards are unchanged. The SBA has not announced when the proposed rule would take effect. The agency is expected to accept public comments before issuing a final rule.About The AuthorAuthor: Brian EdwardsBrian Edwards is associate publisher and associate editor of Tribal Business News and Native News Online. He is a longtime publisher, editor, business reporter and serial entrepreneur. Subscribe Today!Other Articles by this authorDefense Department reaffirms tribal, ANC eligibility in SBA 8(a) programTribal heritage projects eligible for up to $100K in federal funding through NPS programIHS launches tribal long-term care construction initiative with three projectsIḷisaġvik College acquires site for long-planned Utqiaġvik campus This article is available to paid digital subscribers. Click here to sign in or get access.
Global HIV prevention declined drastically after Trump aid cuts, U.N. finds
Cuts from the U.S. and others have hit hard, with the number of people receiving PrEP dropping by 38% from 2024 to 2025, according to data from 62 countries.
Science facility in Newport News breaks ground on new center
The Thomas Jefferson National Accelerator Facility broke ground Friday for a new center that will expand its mission into high-performance computing, artificial intelligence and the data-driven research to meet the demands of modern science.
Science facility in Newport News breaks ground on new center
The Thomas Jefferson National Accelerator Facility broke ground Friday for a new center that will expand its mission into high-performance computing, artificial intelligence and the data-driven research to meet the demands of modern science.
Trump Is Losing Ground With White Working-Class Voters on the Economy
A review of polling data shows an extraordinary swing among white working-class voters on the president’s handling of the economy.
San Antonio mom of five building healthy parenting habits through series of free classes
EAST TEXAS POLITICS: Texas ag commissioner contacts White House over USDA screwworm handling
Texas Agriculture Commissioner Sid Miller criticized the USDA’s response to the New World screwworm on this week’s edition of East Texas Politics on East Texas Now with Blake Holland. Smith County Pct. 3 Commissioner J. Scott Herod, a cattle rancher and owner of Cut Beef in Tyler, also appeared on the program. Plus, State Rep. Cody Harris talks data center water usage.
Dark energy survives major challenge as universe keeps accelerating
A bold claim that the universe’s accelerating expansion was an illusion has been put to the test—and failed. Researchers found that the study behind the controversy made key mistakes when analyzing supernova data. After revisiting the evidence, astronomers concluded that cosmic acceleration remains as strong as ever.
Zelda: Ocarina of Time Nintendo Switch 2 remake was one of the most popular titles of Summer Game Fest 2026, according to data
Top 10 most popular games of Summer Games Fest revealed, with Zelda: Ocarina of Time remake placing high.
'Democrats want to win': Platner's support reflects a changing party in the Trump era
Democrats are rallying behind Maine Senate candidate Graham Platner despite a series of controversies that might have derailed a Democratic campaign during the height of the #MeToo movement.
A lot of health AI isn’t where you think it is, and it’s not overseen the way you might expect
The same AI may be regulated by different entities depending on where it is used, the data that it's trained on," said Maya Sandalow.
Redo TAVR with balloon-expandable valves linked to positive outcomes, key improvements
Researchers tracked real-world data from more than 140 patients who originally received a transcatheter heart valve from Edwards Lifesciences, Medtronic or Boston Scientific.
Notion Is Migrating to SwiftUI, Apple Confirms at WWDC
Apple this week confirmed that Notion is migrating its user interface to SwiftUI, citing the app's desire for greater performance and UI consistency than its existing web-based stack can deliver. Notion is a productivity app that combines notes, documents, databases, and project management tools in one place. Users can create pages containing text, tables, kanban boards, calendars, and more, and organize them in a flexible hierarchy.
Public Health at an Inflection Point: Aligning State Systems to Strengthen Population Health
The US public health system is facing an inflection point characterized by chronic underinvestment, workforce and service delivery challenges, outdated data infrastructure, growing health inequities, and increasing instability within the broader health care safety net including projected Medicaid coverage changes and continued rural hospital closures.
Safe blood supply improves as voluntary donations exceed 85%, but many people still lack access
New data from the World Health Organization (WHO) show sustained progress towards safer blood supplies globally but also highlight persistent inequalities in access to safe blood and weaknesses in governance, financing and regulation of blood systems.
Panthers are telling the world's biggest sports stories at FIFA World Cup 2026
Meet a few of the students and alumni covering the FIFA World Cup for top organizations.
Latest News In AI Chips - AI-Powered Shift: Transforming Data Into Business Intelligence
Treasure Global Inc. has secured a US$15 million contract to develop an AI-powered Social Listening Platform for Creative World Industries, emphasizing the growing demand for AI systems that convert digital data into actionable insights. This platform leverages machine learning and NVIDIA-powered infrastructure to provide real-time sentiment and trend analytics across various sectors. The deployment underscores a trend in the AI chips industry towards enhancing real-time decision intelligence...
Former FBI agent talks heightened political tensions as The World Cup poses large security challenge
Pokémon Go players unwittingly contributed to tech with military drone uses
The repurposing of Pokémon Go data for AI training continues to draw scrutiny.
Man fatally shot while working at Northwest Side business, SAPD says
A man was shot and killed early Friday while working at a Northwest Side business, according to San Antonio police.
Data center, dog park among 12 Lubbock business openings for May 2026
From a new indoor dog park to a historic inn turned apartments, see what changed in Lubbock's business scene for May 2026.
Science fiction? Musk's lofty SpaceX goals unrealistic, skeptics say
Elon Musk's SpaceX has made awe-inspiring achievements since its founding more than two decades ago and has big ideas—colonies on Mars, orbital AI data centers, rapidly reusable rockets—for the future.
Texas Republicans press for local control over spread of AI data centers on first day of convention in Houston
The proposed language by the party’s Legislative Priorities Committee appears to have strong support from rural delegates, but it potentially stands at odds with the priorities of Gov. Greg Abbott and other state leaders.
R.I. to make crash data public after years of secrecy
The House and Senate also passed three bills in response to ICE actions, prohibiting civil arrests at R.I. courthouses without a valid judicial warrant.
South Korean business group urges power market reform
S. Korea's business lobby called for electricity market reform, saying AI data centers, renewables and energy storage require real-time pricing.
Pokémon Go Data Wasn’t Shared With Drone Company, Niantic Spatial Says
The company says it no longer receives data from the monster-catching app after Niantic was acquired by Scopely
Forward Deployed Engineering: Delivering Business Outcomes with AI
Databricks is launching Forward Deployed Engineering: engineers embedded with our customers, with the single mission of delivering business outcomes from data and AI.
The Politics Hour: The final countdown to the D.C. primary and Virginia lawmakers stall over the budget
WAMU's Alex Koma and Washington Informer's Sam P.K. Collins get us ready for the D.C. primaries. Plus, Virginia Delegate Vivian Watts weighs in the data center tax breaks stalling budget negotiations.
‘It’s very tough’: Texas barbecue businesses adapt as brisket prices climb
Virginia’s New Business Screening Services Program: Key Compliance Obligations
Virginia is implementing a new Business Screening Services (BSS) program that will significantly change how private background screening companies handle
Death after TAVR: New data support use of better patient assessments
A vast majority of patient deaths in the first year after TAVR have nothing to do with heart health. Could care teams be doing more to identify high-risk patients?
A sign of the times? Two more Riverside restaurants closing their doors
Two more Riverside restaurants are closing their doors, sharing the sad news on Facebook.
Postal Service Issues Proposal to Block Mail Ballots in States That Don’t Turn Over Data
Democrats and voting-rights groups have challenged the proposed rule as a harmful federal intrusion that could affect millions of voters who cast their ballots by mail.
Science Notes: Gambling Harms and Disorder
This Science Note summarizes data on the prevalence of gambling harms and disorder in New York State, the associated risk factors, and evidence-based treatments to treat gambling disorder.
New GreatXML Exploit Bypasses Windows BitLocker via Recovery Partition XML Files
GreatXML can bypass BitLocker on Windows systems where Defender Offline Scan was used, exposing encrypted drive data.
The 3 sectors where wage growth is still outpacing inflation
New data showed inflation outpaced wage growth for the second consecutive month in May. Three major sectors still have higher wage growth.
Congo says number of confirmed Ebola cases rises to 676
The number of confirmed Ebola cases in Democratic Republic of Congo has increased to 676, including 136 deaths, government data showed on Thursday.
Who evaluates the evaluators? The data science behind agent evals
Learn how Copilot Studio approaches AI agent evaluation with generated data, grader validation, and scalable testing that improve agent quality.
From YouTube to Disney+: Preschool hit 'Gracie's Corner' lands streaming and development deal
The educational series “Gracie’s Corner” is joining Disney+.
From YouTube to Disney+: Preschool hit 'Gracie's Corner' lands streaming and development deal
The educational series “Gracie’s Corner” is joining Disney+.
Fermilab storage infrastructure enables AI-driven scientific and research discovery for DOE’s Genesis Mission
The U.S. Department of Energy’s Genesis Mission is building a new era of AI-driven scientific discovery — and it requires far more than powerful supercomputers to succeed. To support this national effort, Fermilab’s Fermi Data Platform is providing secure, large-scale data infrastructure needed to make advanced AI research possible across the American Science Cloud.
Inside Hartford HealthCare's strategy to build a safer AI front door for patients
The health system integrates PatientGPT into its patient portal and clinical infrastructure, seeking to offer consumers AI-powered health guidance while maintaining physician oversight, data governance and continuity of care.
Tuffy Latour Elected Vice President of Sport on IBSF Executive Committee
SALZBURG, AUSTRIA (June 11, 2026) – During the ongoing 2026 International Bobsleigh & Skeleton Federation (IBSF) Congress, USA Bobsled/Skeleton (USABS) is proud to celebrate the election of longtime coach and leader Tuffy Latour to the IBSF Executi...
Eaton to Merge Mobility Business With Dana in $10B Deal
The separation of the division will allow Eaton to focus on its electrical and aerospace businesses, which are benefiting from the AI-driven data center boom
South African business confidence edges up in May after April slump
South African business confidence edged up in May after a sharp fall in April, as companies adjusted to the oil price shock triggered by the Iran war and vehicle sales remained buoyant, data showed on Thursday.
At Ochsner Health, better work drives better patient experience
The Gulf South-based health system found that when patient and employee experience teams share data and listen to feedback, cultural transformation begins.
Nearly a dozen kids gifted shopping spree at Academy Sports + Outdoors
A key congressional race in California will test progressives' appeal in a Republican district
Randy Villegas, a populist insurgent, has won the Democratic primary for a House seat representing California’s Central Valley.
Temple University Japan Further Expands Academic Offerings with Launch of Cybersecurity Major and Data Science Certificate in Fall 2026
Temple University, Japan Campus (TUJ) will launch a Bachelor of Science in Cybersecurity through the university’s College of Science and Technology beginning in the fall 2026 semester.
Texas governor proposes new data center regulations
Gov. Greg Abbott proposed new regulations for Texas data centers, citing concerns about energy consumption and costs for local residents.
New Data Center, Student Collaboration Space Put People at the Heart of Computer Science
The Computer Science and Engineering Department unveiled a new on-site data center that will accelerate computing and artificial intelligence research advances, while giving graduate students and other computer science researchers hands-on access to cutting-edge computing infrastructure.
Panel discussion on politics of AI set
CHARLESTON – Berkeley Springs will play host Sunday to a panel discussion to look at the growing use of artificial intelligence – AI – along with the data centers powering the revolution, and the politics that is growing contentious not just in West Virginia, but nationwide. Tangle News – a national news outlet that looks […]
Panel Discussion On Politics Of AI Set In Berkeley Springs
CHARLESTON – Berkeley Springs will play host Sunday to a panel discussion to look at the growing use of artificial intelligence – AI – along with the data centers powering the revolution, and the politics that is growing contentious not just in West Virginia, but nationwide. Tangle News – a national news outlet that looks […]
Fraud detection critical to online health research, study finds
While online research is a useful way to reach people who may not take part in in-person studies, researchers are increasingly concerned that fake, automated, and duplicate survey responses can reduce data quality and compromise findings.
Data: Deadly overdose deaths drop for 3rd consecutive year in RI
Deadly drug overdoses statewide have dropped 50% since 2022, according to new data released by the Rhode Island Department of Health.
Lab-created 'moon' rock could help scientists interpret lunar data and explore how water might form on the moon
The moon may look unchanged from afar, but its surface is constantly reshaped by microscopic impacts and a steady stream of particles from the sun, a process known as space weathering. Now, Georgia Tech ...
Up, Up, and Away With Weather Balloons
A dozen students participating in NASA’s 2026 Student Airborne Research Program collected data about the atmosphere, using a weather balloon that measures ozone concentrations as it rises.
The Health and Wellbeing of Formerly Incarcerated People in Connecticut: Insights from the DataHaven Community Wellbeing Survey
By Carter Shannon, Nat Markey, Nora Hodgson, Samantha Lydell, Andrew Carr, and Mark Abraham, DataHaven About this Report Approximately 1 in 5 men aged 18–64 in Connecticut have experienced incarceration at some point in their lives. This population includes people who have been held in a local jail for a single night and those who have served lengthy prison sentences, and it cuts across race, age, geography, and socioeconomic background in ways that reflect broader structural inequities in the criminal legal system. Yet across nearly every indicator of wellbeing, formerly incarcerated people in Connecticut face significant disparities compared to those without an incarceration history. This report explores data on the experiences of formerly incarcerated men in Connecticut from the DataHaven Community Wellbeing Survey (DCWS). The DCWS illuminates significant gaps in economic wellbeing, physical health, mental health, and social support between men with and without incarceration histories in Connecticut. The survey also reveals worse self-reported outcomes for formerly incarcerated people across a range of quality-of-life indicators, with disparities that are often most severe among those who have been incarcerated more than once. These disparities do not arise by chance. They are shaped by a policy landscape that erects lasting barriers to housing, employment, and healthcare for people leaving incarceration, as well as by the physical and psychological toll of incarceration itself. This report is being written in the political context of federal funding cuts to social programs and proposed rollbacks to Medicaid eligibility, changes that will disproportionately impact people with incarceration histories, who are more likely to rely on public health coverage and other safety net supports.
OpenAI suspects China-linked campaign tried to sway data center debate
OpenAI said the effort "sought to exploit and amplify existing public concerns about energy prices and local impacts of data center development."
‘House of the Dragon’ Enters Top 5 Buzziest Titles Ahead of June 21 Return
ScreenShare: A data partnership between ScreenEngine/ASI & TheWrap
Virginia's business reputation at the center of state budget impasse
Lawmakers are split on whether to end a tax exemption for data centers early.
Nvidia Buys Kumo AI To Bring AI Predictions To Business Data
Nvidia's reported $400 million acquisition of Kumo AI is a bet that the next wave of enterprise AI value will come from business data, not just documents and code.
Congo says number of confirmed Ebola cases rises to 635
The number of confirmed Ebola cases in the Democratic Republic of Congo has increased to 635, including 127 deaths, government data showed on Wednesday.
Ecosystems have an afterlife, where dead help shape the living, research finds
New study reveals the physical remains of plants and animals that shape entire ecosystems continue to influence the environment long after death.
Nancy Mace's unpredictable career is up in the air after finishing last in South Carolina primary
Rep. Nancy Mace has finished a distant fifth in South Carolina's Republican primary for governor, leaving her political future uncertain.
Offensive Line Health in the NFL 2015 to 2025
This will have a lot of data, so if you don’t want to look at and think about numbers, just skip to the conclusions at the end. For those who are unaware, the only positions that play ever offensive snap (by design) are the OL and the QB. So in an ideal situation, all five […]
Business Travel Holds Steady as Travel Costs Rise
SAP Concur data shows companies have maintained business travel in 2026 despite rising fuel prices and higher travel costs. Learn more.
Everyone wants a piece of Tesla's battery business
Electricity demand from AI data centers is pushing everyone — including automakers like GM and Ford — into the energy storage business.