SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " reduce " 1,246 found 🔀 AI-powered Shuffle
A review argues the family dog may become science’s unlikely ally against autism
This peer-reviewed Perspective synthesizes a decade of research on a surprising candidate for autism science: the laboratory Beagle. Drawing together scattered studies, the review authors argue that dogs carrying engineered changes in the Shank3 gene reproduce core human features of autism spectrum disorder, including social withdrawal, altered sensory responses, and reduced attention to the eyes of a face. The synthesis assembles, for the first time in one place, the parallels between mutant dogs and autistic people, alongside early signals that oxytocin, a psychedelic, and a third compound may soften these traits. The authors frame the dog as a complementary, ethically governed model, not a replacement for existing ones.
Israeli Soldiers Fatally Shoot 2 People in Southern Lebanon, Health Officials Say
The shooting came a day after Israeli troops began operating under new orders intended to reduce the risk of flare-ups in its conflict with Iran-backed Hezbollah militants.
Covid vaccine study the acting CDC director blocked is published in an outside journal
The findings suggest that Covid vaccines reduced the likelihood of severe illness last fall and winter.
CDC’s chief blocked a covid vaccine study. Now it’s in a top medical journal.
The study found that the vaccine reduced the risk of emergency department visits and hospitalizations among healthy adults by about half last winter.
Business travel buyers look to AI for help managing disruption
Separate surveys from Business Travel Show Europe and TravelTech Show highlight growing investment in artificial intelligence as travel companies look to manage disruption, improve traveler experiences and reduce costs.
Health officials launch clinical trial reforms to counter China threat
The Food and Drug Administration (FDA) on Monday launched a new initiative to speed up early-stage clinical trials as part of an effort to reduce development timelines and reverse a growing trend o…
Kenosha schools consider cutting sports, 40 teaching positions to address $17M deficit
The Kenosha Unified School District is weighing several options to reduce its expected $17 million budget deficit if a planned November referendum fails.
Scientists have designed a clay that can prevent fruits and vegetables from rotting too quickly
The gas ethylene causes fruit and vegetables to ripen faster and is responsible for millions of tons of food being lost annually during transport and storage. Now researchers from the University of Copenhagen, among others, have succeeded in getting clay to collect the gas and hope that the material can help reduce food waste in the long term.
France restricts public drinking and outdoor sports as heat wave bakes parts of Europe
France is in the grips of a severe heat wave, leading to canceled trains, concerts and sports events. Authorities have banned public drinking in “red alert” zones to reduce risks.
Ann Arbor seeks business input for plan to reduce waste, boost sustainability
The city’s Office of Sustainability and Innovations has launched a digital survey to gather feedback on its emerging Circular Economy Action Plan.
Stanislaus County OKs new mental health plan, prepares for state monitoring
County officials hope the plan increases access to care and serves to reduce homelessness, relieve burden on the criminal justice system and reduce untreated mental illness.
Scientists found a cannabis compound that relieves pain without the high
Compounds responsible for the aroma of cannabis and many other plants may offer a surprising new way to relieve chronic pain. Researchers found that several cannabis-derived terpenes significantly reduced pain in mouse models of fibromyalgia and post-surgical pain, with one terpene, geraniol, showing especially strong effects. Unlike THC, these compounds are not associated with psychoactive effects, making them a potentially attractive alternative for pain treatment.
First US patient enrolled in device study to reduce coronary microvascular dysfunction
The self-expanding A-Flux device is implanted in the coronary sinus to increase pressure on the venous side of the heart and improve perfusion in smaller vessels.
Mu-g Technologies enters the parabolic flight business
A startup has acquired an aircraft to offer commercial parabolic flight services even as NASA seeks to acquire its own aircraft for reduced-gravity flights.
Bourbon reps push for tariff reduction ahead of trade talks with India
Liquor industry leaders want U.S.-India trade talks to further reduce tariffs on spirits, including bourbon, to boost exports.
Scientists reprogram brain immune cells to fight Alzheimer’s
A newly identified molecule called OLE helped restore the brain’s immune cells to a more protective state in Alzheimer’s models. The treatment reduced toxic plaque buildup and improved memory, raising hopes for a new therapeutic approach.
Michigan’s aging brains need more protection, poll shows
Lifestyle changes can reduce risk of Alzheimer’s disease and other forms of dementia but a poll shows many Michiganders over 50 don’t know about or do them.
Michigan’s aging brains need more protection, poll shows
Lifestyle changes can reduce risk of Alzheimer’s disease and other forms of dementia but a poll shows many Michiganders over 50 don’t know about or do them.
Fort Bend County to conduct aerial mosquito spraying amid public health emergency
Fort Bend County officials will conduct aerial mosquito spraying next week as part of an emergency effort to reduce mosquito populations and help protect residents from mosquito-borne illnesses.
How LinkedIn helps marketers cut wasteful spend and improve roi
Discover how marketers use LinkedIn to improve ROI, reduce wasted spend, and drive measurable business results.
Epic reveals Unreal Engine 6 is integrating AI models so developers can ‘reduce tedious work’
Epic claims UE6 is “going to change a lot about how games are made”…
Ozempic users may be making a major weight-loss mistake, new study suggests
New research finds GLP-1 users significantly reduced physical activity, with daily steps and exercise declining after starting a weight loss medication.
WHO Step-by-Step programme recognized as a promising innovation for mental health in humanitarian settings
WHO, in collaboration with the Pan American Health Organization (PAHO) and Lebanon’s National Mental Health Programme, showcased Step-by-Step at the World Bank Group’s biennial Fragility Forum in Washington, DC. The forum convened more than 1500 representatives from governments, international organizations and civil society to advance the development agenda in the world’s most fragile and crisis-affected communities. WHO was invited to demonstrate Step-by-Step – a digital self-help intervention for depression, alongside innovations presented by Stanford University and Google. The World Bank Group selected Step-by-Step from among more than 50 innovations that they reviewed in the lead up to the Forum.About Step-by-StepStep-by-Step is a free digital tool developed by WHO in collaboration with Lebanon’s National Mental Health Programme and other partners, that helps people manage depression and anxiety on their own, with light guidance from a trained supporter. It uses a picture-based story to walk users through evidence-based techniques for managing common mental health conditions. Users complete five modules, with weekly contacts – of around 15 minutes each – from a trained non-specialist helper, such as a community health worker.Evidence-basedClinical trials in Lebanon involving nearly 1250 participants – including 680 Lebanese participants and 569 Syrian participants – showed that Step-by-Step significantly reduced depression, anxiety and stress, and improved daily functioning. By the end of the programme, a reduction in depressive symptoms of more than 50% was reported by almost half (46%) of Lebanese participants and more than one third (37%) of Syrian participants compared to approximately 14% of those who did not use the programme. Cost-effectiveness analyses further suggest that Step-by-Step may offer a cost-saving response to depression in humanitarian emergencies in low- and middle-income countries.Used globallyStep-by-Step is already in use nationwide in Lebanon and Thailand, as part of each country’s mental health system. In India, the NGO – Kaya Guides – has adapted Step-by-Step for delivery through a widely used messaging app. Together, these programmes have provided thousands of people with evidence-based support for depression. The content is freely available from the WHO website for any organization or country to adapt for their own context.A new implementation guideThe Fragility Forum coincided with the recent launch of WHO’s new practical guide: Psychological self-help interventions: delivering self-help for individuals, featuring Step-by-Step and Doing What Matters in Times of Stress (WHO, 2026). The guide is designed to help governments, health workers, organizations and planners bring evidence-based mental health support to more people, particularly in low-resource and crisis-affected settings.
Latvia pilots citizen engagement in research grant evaluations
Latvia has introduced an element of citizen engagement to the evaluation of nationally funded research grants. The aim is to both create more connections between science and society, and to improve the quality of its evaluations. The move comes as research funders across Europe are experimenting with ways to improve evaluation processes in the face of a sharpened focus on science’s impact on society. Evaluators of grant applications submitted to Latvia’s Fundamental and Applied Research Programme (FLPP), the country’s main research funder, will this year have the option of consulting citizen feedback on challenges the public thinks science should focus on to inform their decisions. “In recent years, both public discussions and policy-level debates in Latvia have highlighted the importance of demonstrating how publicly funded research contributes to society, the economy and the resolution of real-world challenges,” said a source at the Latvian Council of Science (LCS), which manages the FLPP. “At the same time, research institutions themselves expressed interest in improving the project evaluation framework while continuing to ensure that funding is awarded to the highest-quality projects,” the source added. The citizen input comes from a survey that was conducted between 25 February and 16 March 2025, to which 1,737 people responded. It gathered information on what the public views as problem areas for Latvia, and the role of science and technology in providing solutions to these problems. A summary of these responses has been included as an annex to the FLPP 2026 call for proposals that evaluators can refer to, purely in an advisory manner, when judging proposals. Results from the survey show that the main problem areas identified by the public were in healthcare and public health, followed by the development of new treatment methods and medicines, and then digital technology, data security and cyber security. At the bottom of the list was research aimed at acquiring new knowledge about the universe, matter and the laws of nature. Further analysis looked at the public view of the possible role of science in solving these problems. The survey charted 4,167 individual responses based on open-ended questions that were derived from the participants’ answers. The analysis again found that medical and health sciences topped the scoring, with 788 responses referring to the field. Humanities and the arts were bottom of the list, with 625. Digging further into the details, the survey suggests citizens are aware of and concerned about a number of research areas. This includes technologies and innovation to improve the environment or reduce pollution, the development of modern military technologies and cybersecurity tools, and the development and application of artificial intelligence, among others. “We hope this initiative will help strengthen public trust in science and create a more meaningful dialogue between researchers and society,” the LCS source said, adding that it offers benefits to researchers, evaluators and to the general public. More space for citizen engagement in evaluationsThere is a gradual but increasing use of citizen engagement in research evaluation processes around Europe, especially in healthcare, but it remains relatively rare, said Henry Sauermann, a professor at the European School of Management and Technology in Berlin and an expert in citizen science.“Given that we are at a point where citizen involvement is extremely limited, there is presumably space for more, but it's not that we should do it just because we want to do it,” he told Science|Business. He said some research lends itself better to having citizen input, and this usually tends to be on the applied end of the science spectrum where the public can offer useful feedback based on their experiences. He added that advising scientists on certain topics to study is also a useful approach, in the way that Latvia is doing. “The public does fund a lot of science, there's a lot of tax money going into this. We of course do want to preserve academic freedom, but it's also not unreasonable to incorporate more feedback or input from citizens where possible,” he said. Related articlesCitizen science: where, when, and how to let the public contribute to researchHow can Europe cope with a flood of AI-assisted research grant proposals?Data Corner: Horizon Europe’s AI, digital and data call success rate is 5.2%There are several ways of involving citizens in science funding. The most minimal way is having a few representatives on a panel, such as members of a patient group or union. The most direct way is crowdsourcing funding for specific projects. There is an increasing number of online platforms that allow the public to chip in to support scientific proposals.Sauermann studied this in a recent paper and found that it can have its uses, but it still is not clear if there are benefits to it. There are various assumptions linked to citizen engagement, for example that it increases public trust in science, or that it provides a representative view of what the public thinks about science. These are not necessarily true, Sauermann found. People who participate in engagement activities tend to already be very trusting of science, and, on the whole, it is generally the well-off and well educated who contribute, giving a narrow view of public opinion. On whether citizen input can help manage the increasing number of proposals that are being submitted due to assistance from AI, Sauermann is more sceptical. “The obvious answer to the flood of AI-written proposals is AI-driven evaluation,” he said, adding that it doesn’t mean citizen engagement shouldn’t be a part of evaluations in a well thought-out manner. Southern Denmark’s successful approachOne successful example of citizen engagement in science evaluations was implemented in southern Denmark. Between 2019 and 2025, citizens in the region were invited to vote to fund one of five pre-selected projects in the field of healthcare. The project, called A Healthier Southern Denmark, was a collaboration between regional authorities, the University of Southern Denmark, and two media partners. Over the seven years, there were 75,000 votes and significant public engagement online and on social media. “It was a bit of a wild project, we’d never done something like that before and we were a bit nervous about what would be said in the media about it. But actually, people were very positive,” said Anne Kathrine Overgaard, one of the main organisers of the project from the University of Southern Denmark. The university and its researchers have learned a lot from the experience, particularly about engaging with society and shaping their research to match real-world needs. This is important with Europe’s increasing focus on competitiveness and bringing innovations to market faster, Overgaard said. She hopes to see more citizen engagement in evaluation processes and in science more broadly. “For many years, citizen engagement has been a bit of an add-on to proposals, just to check a box. But I think things are changing,” she said. It’s less about citizens just gathering data and more “about the dialogue between the public and the scientists,” she said. The initiative ended last year as the team wanted to regroup to find fresh momentum. The development of AI and AI-written proposals has made Overgaard reflect on how the project could be reworked to help evaluators. She hopes to bring it back in the future. “It could be a good idea to try this initiative again in a slightly re-worked format,” she said.
Forza Horizon 6 update reduces 1,000-hour grind for multiplayer Xbox achievement
Playground Games has rolled out a new update for Forza Horizon 6, which makes an achievement easier to unlock and balances the game's crazy AI racers.
Covid vaccine linked to broad protections against heart conditions, study finds
The vaccine modestly reduced cardiovascular conditions, hospitalizations and deaths of all causes, including those not linked to covid, researchers said.
Centene to offer buyouts to some employees as health insurer cuts costs
The health insurer Centene did not indicate how many employees it offered buyouts to, or how much it is aiming to reduce its workforce.
Formation structure in venture-backed companies: Why getting it right early matters
Choosing the right entity early can ease fundraising, reduce tax risks and help startups avoid costly restructuring later.
iPhone Ultra Price: Apple’s Foldable Must Protect The iPhone 18 Pro
Apple's rumored $1,999 foldable iPhone could help absorb rising component costs and reduce pressure to raise prices on mainstream models.
Is SMIC N+3’s Metal Pitch Smaller than Intel 18A’s?
Almost four years ago, we published that SMIC had started shipping 7 nm (N+1) chips. Now, SMIC is shipping its third-generation 7 nm (N+3) process in Huawei’s Kirin 9030, with a minimum metal pitch of 32.5 nm, about 10% tighter than the 36 nm minimum metal pitch shipping in Intel’s latest Panther Lake CPUs on 18A. The headline is true, but incomplete cherry picked metric. N+3 reaches the density of TSMC N6 through aggressive DUV multi-patterning and design-technology co-optimization (DTCO), but it pays for that in complexity, efficiency and process control. We found this and more in our reverse engineering and teardown where we cover SMIC’s N3 process technology, Huawei’s packaging, memory, architecture, and more. SemiAnalysis has been building a state-of-the-art teardown lab in Oregon capable of analyzing the world’s most advanced and important chips over the last year and half. We have already generated revenue on advanced datacenter chip teardowns including our recent reverse engineering of a major TSMC customer’s COUPE CPO optical engine + EIC 3D stack. This is the first public report from the SemiAnalysis Teardown Engineering & Evaluation Lab, or STEEL for short. The lab is aggressively scaling up and out and we’re excited to announce it publicly. This is a bit of inconvenient timing for TechInsights as they are private equity owned and currently being sold while having enjoyed virtually no credible competition for decades. This has led to TechInsights underinvesting in CAPEX. SemiAnalysis exceeds TechInsights in revenue despite no venture or private equity ownership and being founded only 6 years ago. Because we have no external investors and are founder led, we move faster, build faster, and we can release client chip teardowns for free regularly, while focusing on datacenter for our major clients. Here’s the first public image from our lab, the HiSilicon Kirin 9030 Pro SoC: This report will detail our teardown of the Kirin 9030 and our findings on SMIC’s N+3 process, the most advanced in China. For comparison, we’ll show our teardown of the MediaTek Helio G99, made on TSMC N6. Through this comparison, we can look at the effect of export controls – SMIC N+3 and TSMC N6 are comparable nodes, but one is heavily export-controlled, the other free to use the West’s most advanced equipment. Here we see both China’s progress and constraints. SMIC N+3 reaches TSMC N6-class logic density, but it requires far more aggressive DUV multi-patterning, so it does not match N6 on process maturity or cost. The Kirin 9030 Pro performs similarly to three-year-old Android flagships, and trails far behind the current flagship SoCs from Apple, Qualcomm, MediaTek, and Samsung. The efficiency gap is even wider. Export controls have not stopped Huawei and SMIC from shipping advanced silicon, but they have forced a different path. Without EUV, SMIC is leaning harder on DUV multi-patterning, DTCO, and increasingly complex integration. The roadmap continues forward through tighter design rules and backside power, but each step adds cost and process risk. Huawei’s τ scaling and LogicFolding show another path: stacking active logic and recovering density through advanced packaging and system-technology co-optimization (STCO). To understand the Kirin 9030, we must first understand Huawei’s SoC history. HiSilicon is Huawei’s chip design arm, responsible for the Kirin smartphone SoCs, Kunpeng server CPUs, Ascend AI accelerators, and switch/router networking silicon. Before export controls, Huawei was TSMC’s largest customer – the only customer on TSMC’s first EUV node, N7+, and among the first on N5, alongside Apple. That ended in late 2020. Huawei switched to Qualcomm SoCs in its flagship smartphones, though export controls limited them to 4G-only variants. In late 2023, Huawei returned to in-house silicon with the Kirin 9000s, a successor to the Kirin 9000, fabricated on SMIC N+2 instead of TSMC N5. In the following years, they released the Kirin 9010 and 9020 on the same N+2 process. These chips used Huawei’s in-house TaiShan CPU cores and Maleoon GPU. We have not torn down a Kirin 9020 ourselves, so the predecessor die shot is from Kurnal. The die shots show how Huawei spent its silicon budget: which functional blocks are where, and how their areas compare to the predecessor. First, a quick guide to the major blocks on the die. The total die area is nearly identical, but the 9030 uses that area more aggressively. A denser process lets Huawei fit an extra middle CPU core, more GPU and NPU cores, and larger caches into the same footprint. In contrast, the Helio G99 is a much smaller, low-cost SoC, built for budget smartphones rather than a flagship device. While the Kirin 9030 is ~140 mm², the G99 is only ~29 mm², roughly one-fifth the area. The underlying TSMC process technology, however, is directly comparable as a baseline for analyzing SMIC’s. The Kirin 9030 is an evolutionary refresh, not a clean-sheet design. Its CPU, GPU and NPU cores carry over the 9020’s families, and the gains come from three levers: the SMIC N+2-to-N+3 process step, DTCO and floorplan work, and incremental microarchitecture. Area is where the first two show up, and the 9030 scales well here. Performance and efficiency are the harder test. Huawei’s design holds up better than its node would suggest, but the chip still trails, both because N+3 sits behind the leading-edge nodes and because its cores, while competent, remain a few generations behind the newest designs. The new prime core is an incremental update. The main changes are a 10% frequency increase from 2.5 GHz to 2.75 GHz and a doubling in the L2 cache from 1 MiB to 2 MiB. Despite the increased cache, the core size decreased by 7.6%. Excluding the private L2 cache, the core size decreased by 21%. This is a large reduction for an incremental node. Compared with the TaiShan New V120 core in the Kirin 9020, the Kirin 9030’s middle core is almost unchanged architecturally, yet each core shrinks by ~22%. Most of that comes from the move from N+2 to N+3, with layout likely accounting for the rest. Visually, the most noticeable change is the increase from 3 middle cores to 4. There is also a 20% increase in the shared L3 cache of the big cluster. This helps to improve multi-core performance without sacrificing much in terms of area. Even with each core shrinking, the big CPU cluster’s total area is essentially unchanged. The per-core savings went back into an additional middle core and larger caches. The tiny cores shrank less than the prime core (excluding its L2 cache) and less than the middle cores. This is likely because fixed overhead is a larger share on a small core. We cannot resolve any architectural changes from the die shot alone, but the per-clock and efficiency gains shown below point to more than pure process and layout scaling. The area reduction was offset by a doubling of the shared L2 cache from 2 MiB to 4 MiB, leaving the total tiny CPU cluster area slightly larger. Area is the easiest improvement to see from a die shot, but it is only one part of PPA (power, performance, area). For modern logic, power and performance matter just as much, and often more. Since Dennard scaling broke down in the mid-2000s, voltage and frequency have not scaled in step with transistor dimensions, so each node has had to fight harder for gains in performance and efficiency. The starkest comparison is not Kirin 9020 versus Kirin 9030 Pro. Apple’s efficiency cores run circles around Huawei’s prime core. Apple’s low-power core delivers 20% higher integer performance while drawing only 1 W, compared with 4.5 W for Huawei’s prime core. N+3 matches TSMC N6, but N6 is several generations old. Apple and Qualcomm build on N4 and N3P, which are denser and sit on a better voltage-frequency curve, giving them a larger transistor budget and more performance per watt. The 9030’s own cores did improve. The middle and tiny cores gained 17% and 14% in per-clock integer performance over the 9020, with floating-point flat on the middle core and up 11% on the tiny. The tiny core improves cleanly, with performance rising while power falls and efficiency increases by 45% in integer and 24% in floating point. The middle core is mixed: integer performance rises but power rises faster, cutting integer efficiency by 7%, while lower power lifts floating-point efficiency 16%. Per-clock gains at the same or lower frequency are microarchitectural, so the cores are tuned, not just shrunk. Both also failed to hold their rated maximum frequencies, pointing to thermal, power, or stability limits. Per clock, the middle core sits around Arm Cortex-A720 and the tiny core near the Cortex-A520; absolute performance trails because Huawei clocks them much lower. The prime core is roughly Cortex-X2 class per clock, a 2021 design. Apple’s 2020 M1 Firestorm core is still 35% higher per clock and 57% faster in absolute integer performance at a similar 4.5 W. The current leading edge is further ahead again: the Apple M5 P-core is 60% higher per clock and 2.7× faster, the Arm C1 Ultra 45% higher and 2× faster. Matching older high-end cores per clock is a genuine design achievement. What Huawei cannot match is the voltage-frequency curve and transistor budget of leading-edge nodes, which let Apple, Qualcomm and others spend more transistors in the same area on wider cores, larger caches and deeper buffers while running at lower voltage. Huawei’s LogicFolding roadmap is one answer, stacking active logic to recover density and shorten signal paths. We return to it later. The GPU compute units (CUs) changed more visibly than the CPU cores, moving to a more rectangular layout for both the arithmetic logic unit (ALU) clusters and the CU overall. Even with ray-tracing support added, a CU shrank ~28%. However, that shrink is offset by the increase from 4 to 6 CUs and the area outside the CUs grew 33%. Overall, the GPU cluster is larger by ~10%. The GPU is where Huawei makes its biggest gains. The Maleoon 935 is not competitive with current flagships, but it is a large step up from the 920 and reaches older-flagship territory. In 3DMark it is 70% faster in Wild Life Extreme (WLE) and 79% faster in Steel Nomad Light (SNL) than the 920; with 11% higher clocks and 50% more CUs, the ~67% theoretical uplift roughly matches WLE and is beaten by SNL. It edges ahead of the Snapdragon 8+ Gen 1 in WLE and SNL, and the Dimensity 9200 and Apple A16 in WLE, but stays far behind newer parts: the Snapdragon 8 Elite Gen 5 and Dimensity 9500 are ~2.4–2.6× faster in WLE and ~3.2× faster in SNL. The Maleoon 935 is Huawei’s first GPU with hardware-accelerated ray tracing; there it lands slightly ahead of the Exynos 2200, and on par with the Apple A16, with current flagships up to 3.7× faster. The Neural Processing Unit (NPU) saw the largest structural changes of any block, moving from a Lite and a Tiny core in the Kirin 9020 to a Lite and two Tiny cores in the Kirin 9030. Both core types also show significant layout changes. This is a reversal in Huawei’s NPU design. The Kirin 9000 5G, its last flagship chip on TSMC N5, used two Lite and one Tiny core. The series of SoCs on SMIC N+2 moved to one Lite and one Tiny core, likely for area savings. With the Kirin 9030, Huawei has shifted back toward a larger multi-core NPU cluster, but with the additional area going to a Tiny core rather than a Lite core. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Before diving into the process stack, the package and memory are worth separating from the SoC itself. The Pro variant of the Kirin 9030 carries 12 GB of Samsung DRAM, with two stacks of four dies each. The dies were identified as the K4L2E165YD, a 12 Gb LPDDR5X-9600 device fabricated on Samsung’s 1a node, the fourth generation of its 10 nm-class DRAM after 1x, 1y and 1z. 1a has shipped in volume since 2022, so this is current memory rather than older-node inventory. The 16 GB Pro Max variants we obtained were found with both CXMT and Samsung packages. The CXMT package is marked CXDD7JEDM, with two stacks of four dies, packaged in week 45 of 2025. The inferred die dimensions from X-ray computed tomography (CT) are consistent with a known density of ~0.3 Gib/mm² for the CXMT G4 process, roughly equivalent to other manufacturers’ 1z processes. The Kirin 9030 uses a typical integrated package-on-package (iPoP) stack: multiple DRAM dies in a memory package sit above an organic redistribution layer (RDL) interposer, which sits above the SoC and package substrate. The full package is then mounted to the printed circuit board (PCB) through ball-grid array (BGA) solder bumps. The memory package substrate is a thin bismaleimide-triazine (BT) laminate carrying the LPDDR5X stack. The organic RDL interposer over the SoC routes the PoP signals around the die and carries possible dummy thermal copper pillars. The package substrate, a thicker Ajinomoto Build-up Film (ABF) build-up over a BT core, fans the flip-chip bumps out to BGA pitch and embeds the power planes. The whole stack is organic. The only silicon is the SoC and the LPDDR5X dies; there is no silicon interposer. Keeping it all-organic brings the package’s coefficient of thermal expansion (CTE) close to the PCB’s, reducing board-level warpage, and avoids the cost of a silicon interposer the SoC’s bandwidth does not need. In an iPoP stack, the memory package connects to the organic RDL interposer through an array of solder bumps. Underfill fills the gap around those bumps, adding stiffness and protecting the joints from mechanical stress. The Pro and Pro Max variants differ here, which we cover behind the paywall. The die shot and architecture tell us how Huawei allocated its silicon budget. The process tells us what SMIC can manufacture. We use the Helio G99 as the process reference for TSMC N6. Both SMIC N+3 and TSMC N6 are evolutions of previous 7 nm-class nodes. We used targeted TEM cross-sections through logic and memory regions, imaged in both fin-cut and gate-cut directions. Each cross-section caption gives its horizontal field width (HFW), the real width of the imaged area. We start at the transistor fins, then move up through standard cells, local interconnect, and SRAM. SMIC has not overtaken Intel or TSMC. It uses aggressive DUV scaling and DTCO to reach N6-class density, but that density doesn’t translate into comparable performance and efficiency, for two reasons: the node gap to leading-edge nodes, and Huawei’s core designs. Fin Profile One of the most important knobs in a FinFET process is the fin profile: the shape of an individual fin and the channel where current passes from source to drain. The ideal fin is tall, narrow, and nearly vertical. A taller fin increases effective channel width, while a narrower fin improves electrostatic control by thinning the body the gate must control. Push either too far, and the process pays for it: weaker drive current, fragile fins, taper, footing and line-edge variation that hit yield and device variability. The Intel 22 nm, 14 nm, and 10 nm fin cross-sections show how FinFET nodes have improved over time. 22 nm fins were a first-generation structure, relatively short, wide and strongly tapered. The shape limits current density and reduces gate control uniformity across the height of the fin. At 14 nm and 10 nm, Intel pushed the fins taller and narrower while also making the sidewalls more vertical. Rather than shrinking the device, these changes increase the effective channel width per fin and improve electrostatic control. The trade-off is that taller fins at tighter pitches are much more difficult to manufacture. Now, let’s compare the Helio G99 on TSMC N6 with the Kirin 9030 on SMIC N+3. Both processes are in the same class, with fin pitch of 30-32 nm on N+3 and 34 nm in our N6 cross-section. The pitch for N6 is especially interesting as N7’s HD library is generally listed with a 33 nm fin pitch, and N6 did not shrink pitches directly. Its density gains came from DTCO instead of tighter pitches. The 34 nm pitch was stable across our sampled region and serves more as a comparison against the SMIC N+3 we have not investigated further. Pinning down N+3’s fin patterning scheme takes more than one core unit. The CPU cores show a dense ~32 nm pitch, with the pitch between N-P fin pairs alternating between 78 and 88 nm. Logic alone may be consistent with dual-pitch mandrels of 120 and 110 nm, but this is a complex and unusual approach. Combining the pitch from the the 8T SRAM, which has more complex repeat unit, with the CPU core sequence allows us to reverse engineer the patterning steps with more confidence. As both the logic and SRAM should share the same base grid, a single CD mandrel lithography pattern with 128 nm pitch undergoing SAQP produces a die-wide ~32 nm grid (128 nm/4), which supports the pitch sequencing seen in both logic and SRAM cells. In the sampled cross-sections, N+3 shows a taller, narrower, higher-aspect-ratio fin than N6. The measured fin aspect ratio is ~9.5:1 on N+3 versus 7.8:1 on N6. N+3 also shows less top rounding, with an estimated radius of ~2 nm, compared with 2.8 nm on N6. Even though the fin widths differ, the ratio of top rounding to fin width tells the same story, with N+3 at 0.37 and N6 at 0.44. In a geometric sense, lower is better; a perfectly rectangular fin would have no top-rounding penalty. These are single-digit-nanometer features measured from a handful of cuts, so treat the absolute numbers as approximate. The important result is the relative gap: N+3’s fins are consistently taller, narrower and less rounded than N6’s. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Standard Cell A standard cell is the basic building block of chip layout: a fixed-height row pairing one NMOS and one PMOS transistor that share a gate, tiled in a grid to build logic blocks. The key dimensions are contacted gate pitch (CGP), cell height (CH), fin count, and the lower-metal routing grid. To measure density, we use the Bohr metric: a weighted average of NAND2 gate area (60%) and scan flip-flop area (40%). This represents a realistic mix of combinational and sequential logic. This metric has its limitations, especially for complex cell layouts like TSMC’s FinFLEX, which alternates cells with different fin counts. Even so, it is the best metric for a pure process-level comparison. Another important measurement is the fin pitch; it refers to the distance between two fins of the same transistor. In a FinFET process, multiple fins are used in each transistor to increase the drive current and thus performance. TSMC N6 ships both a high-density (HD) library with 2 PMOS and 2 NMOS fins per cell, and a high-performance (HP) library with 3 of each. More fins under the shared gate mean more effective channel width. HP cells switch harder at the cost of area. Designers mix the two on a die, primarily spending HP cells on timing-critical paths, and matching their PPA targets. In the Cortex-A55 core of the Helio G99, we found a cell height of 240 nm for the HD cell. MediaTek has used HD cells in the G99 to minimize die size and thus cost. As an SoC for budget smartphones at ~$100, this is essential. By contrast, we found only one library in the Kirin 9030, with 2 NMOS and 2 PMOS fins. This suggests a narrower library strategy than TSMC N6, where both HD and HP libraries are widely used. This likely reflects the smaller customer base and the more constrained domestic design and electronic design automation (EDA) ecosystem. In all three CPU cores of the Kirin 9030, we found cell heights of 228 nm, 5% smaller than on N6. This is also a reduction of 9.5% over SMIC N+2’s cell height of 252 nm. SMIC N+3 and TSMC N6’s HD library both feature a CGP of 57 nm. For SMIC, this is a 9.5% shrink over N+2. In the past, CGP and cell height alone may have been enough to compare transistor density. Now, however, we must consider scaling boosters and DTCO as well. SMIC’s density gain does not come from EUV. It comes from using every available DTCO booster aggressively. First is fin depopulation: reducing the number of NMOS and PMOS fins in each cell. The first FinFET nodes started with 3 or 4 fins for each transistor. SMIC N+3 and TSMC N6 HD both use only 2 fins per transistor, trading drive strength for density. Next is contact over active gate (COAG). By landing the gate contact directly over the active gate, instead of out over the isolation region, the cell height drops. N+3 integrates COAG while N6 does not. Our N+3 gate-cut cross-sections indicate COAG, with the gate contact sitting over the active region, while N6 shows an off-gate contact. Last is single diffusion break (SDB). Diffusion breaks are inserted between cells in the same row to provide electrical isolation, but they also introduce local layout effects (LLE), layout-dependent shifts in electrical characteristics. In the past, a double diffusion break was used, consuming the space of two CGPs. SMIC N+3 and TSMC N6 instead use SDB, saving area but increasing LLE sensitivity. This must be controlled at the process level and accurately modeled in the process design kit (PDK) so that EDA tools can account for it. Overall, SMIC N+3 has a transistor density of 113.4 MTr/mm², slightly above TSMC N6 at 107.7 MTr/mm². Even without EUV, SMIC has achieved density beyond TSMC’s mature N6 node which utilizes EUV. Metal Stack The smallest critical dimension in the teardown is M0; SMIC N+3 uses a 32.5 nm local metal pitch. That is smaller than the 36 nm M0 pitch on Intel 18A in Panther Lake. However, this does not mean that SMIC has a better process than Intel 18A or TSMC N3P. M0 is a local intra-cell routing layer. Its usefulness depends on the full interconnect stack: M1 and M2 pitch, track count, via and line resistance, design rules, mask count, overlay control, and routing flexibility. The 32.5 nm M0 is consistent with self-aligned quadruple patterning (SAQP), whose four-population line-width loading we read coarsely as alternating widths of 21.5 to 24 nm; M1 and M2, at 38 and 40 nm, are consistent with self-aligned double patterning (SADP), a single A/B split. On TSMC N6, M0, M2, and M3 sit at a relaxed ~40 nm and are consistent with SADP-class double patterning, with no need for quadruple patterning. That said, we measure M2 for example at ~43 nm, likely inflated by sparse routing. We do not assign any specific layer to EUV from our cross-sections; the distinction we can draw is double versus quadruple patterning, not lithography wavelength. Transistor-level density in the front-end-of-line (FEOL) sets an upper bound, but the design is ultimately limited by what the interconnect stack can route. The lowest metals are the most important for standard-cell density, but the semi-global and global layers determine how usable that density is at the block and chip level. Two axes are commonly used for chip cross-sections: the fin-cut and the gate-cut. The micrograph above is a fin-cut and shows metals 0 through 3. This axis lets us see the even-numbered metals, with M0 right above the fins. There are two kinds of M0 lines. The first are the power rails; these are wide wires for the VDD and VSS running horizontally at the top and bottom edges of each standard cell. The wide wires measure 55 nm across, more than double the other M0 lines. Their width minimizes resistance and reduces IR drop. The second kind are intra-cell wires, short segments within the cell that connect terminals to M1. These have alternating widths between 21.5 and 24 nm. The M0 pitch is 32.5 nm, a 19% reduction versus N+2 and N6. At this pitch, DUV patterning requires more aggressive multi-patterning, increasing mask count, overlay sensitivity, process complexity and cost. M0 is below what a single DUV-defined spacer (SADP) can resolve, so SMIC cascades a second spacer step (SAQP). The cross-section reflects the cost: the M0 trenches are visibly more re-entrant (narrower at the bottom than the top) than M1 or M2 on the same chip and carry a bright barrier-rich foot where the trench meets the etch-stop layer. That shape is partly the intended damascene profile, as a slightly narrow bottom helps void-free copper fill, but its magnitude at M0 is driven by the tight pitch and the higher trench aspect ratio. Intel 18A supports an M0 pitch of 32 nm, although Panther Lake has only shipped with a looser 36 nm pitch. This is due to Intel’s heavy usage of HP libraries. Among leading-edge nodes, 18A has the loosest M0 pitches due to PowerVia. With power routing moving to the backside, congestion is reduced, and the entire front-side metal stack can be used for signal routing. M2 is the first true inter-cell routing layer. It runs horizontally like M0 but spans across multiple cells to carry block-level signals. The M2 pitch sets the cell’s track height – the number of M2 tracks that fit between the VDD and VSS rails, defining what the library calls a 6-track or 7.5-track cell. This layer is the most important, limiting the routing of entire blocks. SMIC N+3 features a 5.7-track cell. The M2 pitch is 40 nm, a 5% decrease over N+2 and the same as N6. This shrink keeps the pitch at the edge of what is possible with double patterning. Future nodes will need to increase the number of masks for M2 as reducing the number of tracks is much harder due to the limitations in routing. The micrograph above is in the perpendicular direction, the gate-cut, and shows metals 0 through 4. This allows us to see and measure the odd-numbered vertical metal layers. The M1 pitch is 38 nm, 9.5% less than N+2 and 33% less than N6. The M1-to-gate ratio matters because it sets local routing flexibility. N+2 and N+3 use a 3:2 ratio, while N6 uses a 1:1 ratio, explaining the huge differences in M1 pitch. The more M1 lines there are compared with the gates, the more flexibility there is for power and signal crossing within the cell. Routing flexibility enables more complex and better cells. Clean fractional ratios are also preferred as a grid is periodic and improves layouts. The 3:2 ratio gives SMIC more local routing flexibility than a strict 1:1 grid, but it also complicates layout and patterning. This is a DTCO choice, with SMIC increasing process complexity to recover density and routability without EUV. This 3:2 ratio is not very popular in the leading-edge nodes. TSMC has only used it on N7+, the N5 family, and the short-lived N3(B). They have switched back to a 1:1 ratio for N3E. Intel has only used it on the 10 nm/Intel 7 family, with Intel 4, 3 and 18A all using a 1:1 ratio. Samsung is the only one still using a 3:2 ratio at the leading edge, using it in the SF4 and SF3 families. It remains to be seen if SMIC will remain at a 3:2 ratio or move to a 1:1 ratio with its future nodes. The industry is still actively exploring these local-routing ratios. At VLSI 2026, imec will be presenting work on even higher ratios, including a 2:1 scheme that can reduce area by up to 14%. We will be covering the conference in a future newsletter article. Subscribe We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. The final local interconnect layer for N+3 is M3, with a pitch of 44 nm. The M3 pitch is the same as on N+2 and 10% larger than on N6. The semi-global layers carry the majority of block-level signal routing. They have a coarser pitch than the lower local layers. On leading-edge nodes, they are designed to sit at the limit of DUV single patterning. M4 through M11 pitches were found divided between 80–82 nm (M4–M6), 128 nm (M7–M10), and 148 nm (M11). Given limited sampling, it is possible these are divided further in dense routing areas. At the top are two giant metal layers, M12 and M13. These have kept the same pitches as N+2 at 1920 nm and 4600 nm respectively. While the lower layers’ pitches are generally fixed by the process and library, the upper layers vary much more in pitch and count, depending on the design. Even two smartphone SoCs on the same process can have wildly different metal stacks. The Helio G99 carries fewer routing layers, reaching coarse metal pitches of 850 nm by M9, while the larger and higher-performance Kirin 9030 keeps fine pitches until M11. SRAM At the leading edge, SRAM is much more difficult to scale than logic. TSMC’s latest nodes have seen little to no bitcell scaling, while logic still has more DTCO levers to pull. While looking for other logic libraries in the GPU compute units, we stumbled upon the SRAM. The most common type of SRAM has 6 transistors (6T), but this cell had 8 transistors (8T) instead. 8T SRAM adds two transistors to form a dedicated read port. Unlike a 6T cell, where reading disturbs the storage, the decoupled read port removes read-disturb, improving read stability and letting the cell be pushed harder for performance. At first glance, the cut looked like an unusual logic library, with each cell row having 3 fins of one polarity and 5 fins of another. The rows also alternated in orientation. Energy-dispersive X-ray spectroscopy (EDS) resolved our confusion. The cut had not landed on the GPU logic, but on the SRAM macro beside it. The unusual fin pattern was due to the SRAM library. We return to EDS in the process flow analysis behind the paywall. SRAM libraries are not like traditional logic libraries. Due to the unequal number of PMOS and NMOS transistors, they require specialized rules and layout libraries. They do not need the flexibility of logic libraries, so they are hyper-optimized for one purpose: dense, reliable memory. The SRAM cell we found is a 1:2:2-2:2 cell. This means there is 1 fin per pull-up (PU) PMOS transistor, and 2 fins per pull-down (PD) and pass-gate (PG) NMOS transistor. These 2 PU, 2 PD and 2 PG transistors would usually form a single 6T high-current cell (HCC). An 8T HCC adds a read-pull-down (RPD) and a read-pass-gate (RPG) NMOS transistor, each with two fins. We measured a cell height of 406 nm, which brings the bitcell size to 0.0463 µm². That is a theoretical peak density of 21.6 Mib/mm². We estimate that a 6T HCC would have a cell height of 292 nm and a size of 0.0337 µm². This is ~12% larger than a 6T HCC on Intel 3 and 4. We also estimate the 6T high-density cell (HDC) to have a cell height of 228 nm and a size of 0.0260 µm². This is coincidentally the same as the logic standard-cell height measured earlier. The estimate puts the cell near Samsung 7LPP/5LPP and slightly below TSMC N7/N6. That is a theoretical peak density of 38.5 Mib/mm². 6T HDC is arguably the most important cell as it is used for the largest caches in a chip, the L3 caches and system-level cache (SLC). Both the Kirin 9020 and 9030 have split the SLC into 4 banks to raise total SLC bandwidth. In the Kirin 9030, the SLC increased from 2 MiB to 3 MiB per bank. Correspondingly, the number of arrays within the bank also increased by 50%, from 16 to 24. Each array can store 128 KiB and forms an orderly pattern on the die shot. From the Kirin 9020 to the Kirin 9030, the area of a 128 KiB SLC array decreased from 0.0477 mm² to 0.0392 mm², an 18% shrink. The achieved density is 25.5 Mib/mm², 66% of the theoretical maximum. While the SLC was quite similar across both chips, the L3 has seen some major changes, particularly in terms of its layout. The total capacity also went up from 10 MiB to 12 MiB. Much like the SLC, the L3 is also split into 4 banks. In the Kirin 9020, an L3 bank consisted of 16× 128 KiB arrays and 16× 32 KiB arrays. However, an L3 bank in the Kirin 9030 instead consists of 48× 64 KiB arrays. In the Kirin 9020 L3, a 128 KiB array was 0.0513 mm² and a 32 KiB array was 0.0154 mm². The size of the 128 KiB array is different on the L3 and SLC as the assist circuitry for the two arrays differs depending on their purpose. In the Kirin 9030 L3, a 64 KiB array is 0.0210 mm². Although not a like-for-like comparison, normalized for capacity, it is 18% smaller than the 9020’s 128 KiB L3 array and 31% smaller than its 32 KiB L3 array. The achieved density is slightly lower than the SLC, at 23.8 Mib/mm², 62% of the theoretical maximum. Unlike the L3 and SLC, the prime cores’ private L2 cache uses a 2-bank design. As the prime cores’ L2 is latency-critical, it likely uses 6T HCC instead of 6T HDC. The 9020 has 16 arrays in each bank while the 9030 has 32. Each array has a capacity of 32 KiB. A 32 KiB array in the L2 shrank from 0.0171 mm² to 0.0142 mm², ~17% smaller. The density is 17.6 Mib/mm², ~59% of the theoretical maximum for 6T HCC. SRAM scaled well from N+2 to N+3, shrinking by ~19%, close to the theoretical logic shrink. The caveat is that N+2’s bitcells were unusually large, bigger than comparable 7 nm-class nodes, so part of the gain is catch-up rather than true scaling. With the insights from STEEL’s teardowns, we will be doing a deep dive into SRAM in a future newsletter article. Subscribe Everything above came out of a single STEEL teardown: die annotation, block-level area analysis and TEM cross-sections through logic and SRAM. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Future Roadmap The same cross-sections that pin down N+3 also show where SMIC can go next. Although N+3 is already close to the practical limits of DUV multi-patterning in several layers, SMIC still has a few scaling levers left. A theoretical N+4 would likely start with cell height. N+3 uses 5 M0 tracks between its power rails. Moving to 4 M0 tracks, as on SMIC N+2 and TSMC N6, could reduce cell height by roughly 15%. The routing grid is only one side of the shrink; the front end also must fit into the smaller cell. One possible FEOL lever is reducing the p-to-n isolation spacing from two diffusion grid units to one. Intel used this scaling booster on Intel 4, and TSMC did so on its N3 family. This path trades layout flexibility for density. Fewer M0 tracks reduce local routing resources, while tighter p-to-n spacing raises integration and design-rule difficulty. M2 is also constrained by the cell height shrink. For SMIC to maintain a ~5.7-track cell, M2 would need to move toward ~35 nm. That would move another layer into SAQP territory. SMIC could also reduce the CGP from 57 nm to 54 nm. Intel reached a similar CGP on Intel 10 nm/Intel 7 without EUV. The local interconnect is also tougher. If SMIC keeps the 3:2 M1-to-gate ratio, M1 would need to shrink to 36 nm and would likely require SAQP as well. If SMIC moves to a 1:1 ratio, M1 could relax to 54 nm, but it would give up routing flexibility. Under this theoretical path, we estimate that SMIC N+4 could reach a cell height of 198 nm and a CGP of 54 nm, implying a Bohr density of 137.8 MTr/mm², on par with TSMC N5 or Samsung SF4. However, the difficulty is cumulative. Each step is individually plausible, but together they make N+4 harder than the transition from N+2 to N+3. It will likely take longer, cost more, and carry less process margin. A theoretical N+5 would require a larger integration shift. One possible path is backside contacts (BSCon), moving power routing and source/drain contacts to the backside, which would reduce front-side routing pressure and enable another reduction in cell height. The front-side metal pitches could relax to reduce the process complexity. M0 would likely relax slightly to ~34 nm, and M2 and M4 pitches could relax further. CGP is unlikely to shrink much further. Even with EUV, 48 nm has been the practical limit for yield and process control. This approach would allow N+5’s cell height to fall to 170 nm and its CGP to 53 nm. This implies a Bohr density of 163.6 MTr/mm², on par with Intel 18A’s HP library. However, this would not make N+5 cost-competitive with the leading edge. It would reach a similar density through a much more expensive route. The integration difficulty rises sharply, with new process flows for backside alignment, wafer thinning, contact reveal, and backside metallization. Past this point, standard density and interconnect scaling become increasingly unattractive. That is where Huawei’s roadmap stops looking like a normal foundry roadmap and starts looking like a packaging roadmap. At ISCAS 2026, Huawei unveiled its tau (τ) scaling law, reframing process scaling in the time domain. τ is the time cost of data movement and processing: switching delays in transistors, RC signal propagation delays in circuits, compute, memory, and networking latency. Outside Huawei’s terminology, this is called system-technology co-optimization. This is Huawei’s answer to its lack of EUV lithography. Without EUV, planar density cannot keep pace with TSMC, Intel, or Samsung. If transistor density cannot shrink further, Huawei’s alternative is to shorten wires, reduce buffering, and stack logic vertically. “LogicFolding”, Huawei’s implementation of this new scaling idea, is, in practice, an aggressive 3D stacking approach. AMD V-Cache places SRAM above or below a CPU die. AMD’s MI350X places active interposer dies (AIDs) underneath accelerator and compute dies (XCDs), with the AIDs handling cache, IO interfaces, the network-on-chip (NoC) and embedded metal-insulator-metal (MIM) capacitors. With LogicFolding, parts of the same logic block are split across multiple active dies bonded face-to-face at ultra-fine pitch. This allows Huawei to shorten some critical paths and reduce buffer overhead, not merely add cache capacity or offload the IO and interconnect. Shortening wires is where the higher clocks come from. A large share of a modern core’s delay and energy budget goes into driving long interconnects and the repeater buffers along them. LogicFolding distributes a block’s critical-path gates across multiple stacked tiers bonded at a very fine pitch, so the bond interface behaves like an additional metal layer and the longest paths get shorter. That is how Huawei expects to recover frequency and efficiency it cannot get from the process alone. Huawei’s roadmap shows its intent. Prime core frequency is targeted to rise from 2.75 GHz in the Kirin 9030 to roughly 5 GHz by 2031, far beyond what planar scaling alone could deliver. Prime cores with 3.1 and 3.39 GHz clocks are being tested in its labs, although their power consumption is unknown. Beyond that, chips are in the design, simulation or pathfinding phase, meaning the frequencies are targets. However, the direction matters more: LogicFolding also helps with performance, not just density. The catch is that Huawei’s density claim is not directly comparable to foundry densities. A stacked design can report more transistors per package footprint by adding active layers, even if each patterned die remains well behind TSMC or Intel in front-end density. This is how Huawei can claim to reach foundry 14A-equivalent density by 2031. This is not a like-for-like foundry comparison, with Huawei using stacked logic and measuring density per package footprint. On a normalized Bohr-density basis, SMIC N+3 is ~114 MTr/mm², 38% less than Intel 18A’s HD library. Huawei’s 3D roadmap closes the gap by stacking active logic, reaching 215 MTr/mm² by 2030. In 2031, the roadmap density jumps to 295 MTr/mm², implying either a third active layer, partial EUV insertion or aggressive planar DUV scaling. Huawei’s methodology makes other foundries look much denser as well. Applying it to AMD’s MI450X with an N2 top die on an N3P base die yields a theoretical density of 460.2 MTr/mm² in 2026, compared with Huawei’s 295 MTr/mm² in 2031. This Kirin 9030 does not use LogicFolding, remaining in a conventional mobile SoC package. Instead, it forms the baseline for how far Huawei and SMIC can push planar scaling. Future teardowns of Kirin and Ascend chips will show both planar logic density and Huawei’s hybrid bonding solutions. Export controls changed China’s optimization problem rather than ending it. EUV restrictions raised the cost and complexity of leading-edge manufacturing without freezing it. SMIC reaches N6-class logic density through DUV immersion, SAQP and DTCO, while Huawei shifts more of the burden onto architecture, packaging and system-level integration. Future nodes will be tougher. N+3 still had room to tighten local metals and reduce cell height and CGP. Further scaling without EUV leaves fewer levers. More aggressive multi-patterning adds masks and overlay error. SMIC can keep pushing DUV, but each step will get more expensive and less forgiving. The design side is just as critical. Huawei had domestic EDA tools and flows before the Kirin 9030, with the Kirin 9000s, 9010 and 9020 making that clear. Huawei was able to ship multiple consumer SoCs on SMIC N+2 and N+3 while cut off from the Western EDA stack. US export controls restricted EDA tools for advanced chips in 2022 but did not target tools for more mature chips. In 2025, the US government briefly placed much broader restrictions on EDA software from Synopsys, Cadence, and others, before lifting them less than two months later as part of a trade deal tied to rare earths. Huawei has been unable to access those tools because it remains on a US trade blacklist. That forced Huawei, SMIC and Chinese academic institutions to build their own tools and flows. Researchers at Peking University recently announced a prototype EDA tool for Huawei’s LogicFolding architecture, which requires a new flow to handle the multilayer layout and floorplan. This is not the same as replacing the full Synopsys or Cadence stack, but it shows where domestic EDA is headed: toward tighter co-optimization between architecture, process and packaging. These advances are also diffusing into the Chinese ecosystem. SMIC is licensing its N+2 and N+3 processes to HLMC/Hua Hong at the government’s direction rather than by choice. If the same process learning feeds into Ascend accelerators for AI training and inference, the choke point shifts from one named fab to an ecosystem. Alibaba’s T-Head silicon arm and Cambricon, a Chinese AI chip designer that is expected to supply ByteDance, could also be major beneficiaries. Sanctions aimed at SMIC alone become less effective once the manufacturing knowledge has spread to other fabs and design houses. China is not closing the gap with Intel, Samsung and TSMC. The teardown shows the opposite in several places: no EUV, no backside power, higher process complexity, and visible trade-offs. But China is still advancing. If domestic chips become good enough for phones, inference, networking and security-sensitive workloads, they can matter strategically without matching TSMC at the leading edge. Behind the paywall, we show what else STEEL can do, with material and process flow analysis of SMIC N+3, and analysis of the Kirin 9030 package. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline, access the full Kirin 9030 and SMIC N+3 analysis or to commission a custom teardown, contact sales@semianalysis.com.
May NFIB Small Business survey finds reduced optimism
The NFIB Small Business Optimism Index fell 0.6 points in May to 95.3, remaining below its 52-year average of 98.0. The Uncertainty Index rose 3 points from April to 91, remaining well above its…
May NFIB Small Business survey finds reduced optimism
The NFIB Small Business Optimism Index fell 0.6 points in May to 95.3, remaining below its 52-year average of 98.0. The Uncertainty Index rose 3 points from April to 91, remaining well above its…
How a UConn program reduces the stigma of mental health care. It’s designed to increase access.
Research at several universities in New York indicates that just having a conversation that promotes mental health on campus normalizes the idea that students will go out to seek help for themselves
New rules expand ACA insurance choices but could come with risks
Plans could offer 30 percent higher out-of-pocket costs or no set hospital networks. Critics say the changes may reduce enrollment by 2 million.
People taking GLP-1 weight loss drugs like Ozempic started moving less
People taking popular weight-loss drugs such as Ozempic, Wegovy, Mounjaro, and Zepbound may be losing pounds, but they could also be moving less. Researchers analyzing Fitbit data found that daily step counts and exercise levels dropped after people started these medications, despite successful weight loss. Because the drugs can reduce muscle mass along with fat, the decline in physical activity raises concerns about preserving strength and long-term health.
GLP-1 Drugs May Protect Against Cancer— Here’s What That Means For Public Health
New research suggests GLP-1 drugs could reduce cancer risk. A doctor breaks down how that could change public health in the future.
Delaware program aims to expand maternal care access in rural communities
A new initiative in southern Delaware aims to reduce maternal health disparities by bringing prenatal and postpartum support directly to women.
College sports bill authors making pitch to Black caucus
The authors of a Senate bill that would overhaul college athletics warned this week that a lack of congressional action this year could financially wreck historically Black colleges and universities and could reduce chances for college educations for minority students. Senate Commerce Committee Chair Ted Cruz, R-Texas, and ranking member Maria Cantwell, D-Wash., said they […]
Healthy Returns: CVS Health executives on reducing health care's biggest pain points
CVS Health execs discuss how the company is using AI and other technologies to reduce administrative burdens and deliver more proactive care experiences.
First Look: Rimpact's Bolt-on Tuned Mass Damper for Gravel Bikes Promises to Reduce Fatigue
Rimpact claims the device makes for a comfier ride, but doesn't aim to displace the job of a suspension fork.
Social Security is Facing a Political Crisis
On Tuesday the Social Security Trustees released their latest report on the system’s finances. The numbers didn’t change much: Unless something is done, the Old Age Survivors and Disability Insurance (OASDI) program, Social Security’s official name, will be unable to pay full benefits starting in either 2032 or 2034, depending on some technical issues. That’s not far away: If the Trustees are right, the prospect of a Social Security crisis will loom over the next presidential administration. It’s important to understand, however, the nature of the looming crisis. It won’t be an economic crisis. It won’t even be a serious fiscal crisis. Whatever you may have heard, Social Security isn’t in danger of going bankrupt. What we’re facing, instead, is potential political crisis. Congress and the White House could easily take action to sustain America’s retirement system. But given the current state of our politics, there’s no guarantee that they will. There is a widespread misunderstanding of how Social Security works. While Social Security was designed to look like a pension fund, it isn’t. A pension fund pays benefits out of a stock of assets it has accumulated over time. In contrast, Social Security operates as a government transfer program, like food stamps or Medicaid. Now, unlike food stamps — but like the highway trust fund — Social Security is on paper supported by a dedicated tax, the payroll tax, that is assigned to that program. But I say “on paper” because from an economic point of view assigning the payroll tax to Social Security is just an accounting convention. What matters for the U.S. economy is the overall balance between government spending and government revenue, not the difference between one type of spending and one source of revenue. So there’s no inherent economic significance to the fact that by 2034 payroll tax receipts will be insufficient to cover promised benefits. There is, however, a legislative issue. As long as the Social Security Administration can pay benefits out of payroll taxes and its cash reserve, there’s no need for Congress to vote each year to authorize benefits — they just keep going out until further notice. However, once those resources become insufficient, benefits will fall —by 17 percent according to the Trustees — unless Congress passes new legislation that “tops up” Social Security’s finances. Yet the current administration and Republican party are such extremists that there is a real risk that Social Security will be held hostage on behalf of their goals. If this should come to pass, the hostage-takers will claim that shoring up Social Security is unaffordable. Right on cue, Mike Johnson, the Trump-sycophant Speaker of the House, declared on Monday that “entitlement programs” like Social Security “have to be adjusted and fixed,” and that Republicans will introduce a plan to that effect next year. But this is a ploy, because while the cost of maintaining Social Security benefits at their promised level isn’t trivial, it is in fact affordable. According to the Trustees’ report, the actuarial balance of OASDI up through 2050 — the amount of additional funds it would need to keep paying full benefits for the next 25 years — is 1.06 percent of GDP. To put that number in perspective, the Trump administration proposes increasing military spending next year by $420 billion, equivalent to about 1.4 percent of GDP – without any discussion of whether that’s affordable Yet how did we get to the point where Social Security will need to be topped up? The main answer is that we have an aging population, with a growing ratio of retirees collecting benefits to workers paying into the system: Trump’s anti-immigration policies are making this problem worse. According to the Trustees’ report, lower immigration will deepen Social Security’s financial hole because many immigrants are working-age adults who will pay into the system for decades before they collect benefits. In fact, this problem may be much bigger than the report acknowledges: The report’s baseline assumption is that we’ll have net immigration of almost 1.2 million people a year, and even the pessimistic case assumes 750,000 a year. Meanwhile actual net immigration has already been cut far below that — and may now be negative. Moreover, Social Security is being financially damaged by growing income inequality in America. Payroll taxes are levied only on wages up to $184,500, and they don’t touch capital income. With the distribution of income increasingly shifting from labor to capital, as well as becoming more unequal among wage-earners, revenue from the Social Security payroll tax has been falling as a share of national income. From 1990 to 2024, it fell from 5.02 percent of gross domestic income to 4.46 percent. Which brings me to the question that, these days, we ask about everything: How might Social Security be affected by the advent of AI? A short answer: If, as many of us fear, AI accelerates rising income inequality, it will further reduce the payroll tax receipts that currently pay for Social Security and further endanger its finances. On the other hand, if AI, as its advocates promise, leads to faster economic growth, it will increase the potential tax base that could and should be used to support Social Security and other social insurance programs. But to take advantage of that larger base, we’ll have to get serious about taxing wealth and capital income. Is Social Security in trouble? Yes, but only because of the way its financing is currently structured — a structure that no longer works well because our society and economy have become so unequal. Moreover, Trump’s immigration policies are further endangering its already deteriorating financial condition. So don’t believe Republicans’ gaslighting that it will be necessary to cut Social Security benefits. All that is necessary to preserve Social Security is political will to raise taxes on the wealthy and a sensible immigration policy. MUSICAL CODA Actually 67 under current law.
French Quarter businesses struggle during construction as city launches support efforts
Businesses in New Orleans' French Quarter are facing reduced foot traffic and revenue due to construction projects, prompting the city to implement initiatives to help them stay afloat.
Fraud detection critical to online health research, study finds
While online research is a useful way to reach people who may not take part in in-person studies, researchers are increasingly concerned that fake, automated, and duplicate survey responses can reduce data quality and compromise findings.
Small Business Reality Check: Strategies for Resilience
The second half of 2026 presents both challenges and opportunities for small business owners. Those who focus on their people, reduce complexity, and stay proactive about risk will be best positioned to succeed.
Pregnant women may reduce key health risk through less sitting, more light exercise
Women who engage in light physical activity and lessen their sedentary time may significantly reduce the risk of key health problems during pregnancy, according to a new University of Iowa-led study. ...
Scientists, higher ed alarmed by federal 'power grab' over research funding
The Trump administration has proposed regulations to control billions of dollars in federal research funding, which it says will reduce "fraud and abuse." Scientists in Massachusetts and beyond say they could set back research in the U.S. by decades.
3 ways GLP-1 drugs could be getting better
Drug companies are racing to catch up to Eli Lilly and Novo Nordisk, seeking to require fewer shots or reduce side effects.
NEW NFIB SURVEY: Small Businesses Report Reduced Optimism
Main Street pulls back on hiring
University of Vermont Health eliminates 76 jobs, restructures 66 roles
Dozens of jobs are either being eliminated or restructured at the University of Vermont Health Network as administrators work to streamline services and reduce massive financial strain.
PAHO: Health tax levels in the Americas remain too low to curb harmful consumption of alcohol and sugary drinks
Washington, D.C., 9 June 2026 (PAHO) – Levels of health taxes on alcohol and sugar‑sweetened beverages in the Americas remain too low to significantly reduce consumption and prevent noncommunicable diseases (NCDs), even as the Region records some of the highest consumption levels in the world, according to two reports released by the Pan American Health Organization (PAHO).
NC expands specialized mental health supervision to all 100 counties
Specialty Mental Health Supervision program uses specially trained officers to help people with serious mental illness access treatment and reduce justice system involvement.
Wake County Commissioners to hear from WakeMed on potential merger with Atrium Health
WakeMed has defended the merger with Atrium Health, saying it would help reduce costs for supplies, medicines and equipment.
A drug may help people on GLP-1 meds preserve muscle
In a clinical trial, an experimental antibody reduced lean-mass loss in people on a GLP-1 drug. Whether that improves health is unclear.
Beyond ‘dad bod’: What an expanding middle may mean for metabolic health
Columnist Carrie Dennett shares how men can start making more meaningful changes to reduce excess visceral fat (fat stored deep within the abdominal cavity).
Scientists found a new Alzheimer’s trigger and a drug that stops it
Researchers have identified a new Alzheimer’s target and created an experimental compound that blocks a damaging process inside brain cells. In mice, the treatment slowed nerve cell loss, reduced Alzheimer’s-related changes, and even appeared to promote healthier aging.
Alzheimer's Awareness Month: The Science Is Moving Fast
Explore the latest Alzheimer's research on the APOE e4 gene variant, new FDA-approved antiamyloid drugs, and how routine vaccines help reduce risk.
'5 a day': Which fruit and veg are best for heart health and why?
Fewer than one in five people consume enough flavanols each day to help reduce their cardiovascular disease risk, even if they are following the '5 a day' recommendation for fruits and vegetable consumption, a study has found.
Mark Wilson: Florida has proved childhood poverty can be reduced. The work is not finished.
Florida can cut childhood poverty further through sustained collaboration.
Communication Is The Lifeblood Of Your Business—Don’t Mess It Up
Learn how unified communications reduce friction, improve customer experience, boost loyalty, and help employees deliver seamless support across channels.
An Avocado a Day May Keep Diabetes, Hypertension, and Obesity at Bay
Research suggests that eating more avocado may help reduce your risk of diabetes, lower blood pressure, and reduce your risk for obesity and other cardiometabolic risk factors.
Walking Forward cancer program returns to Monument Health after decades serving Native communities
Walking Forward is returning to Monument Health, continuing its work to reduce cancer disparities through navigation, education and screenings for Native communities in western South Dakota.
Final Fantasy 7 Revelation Tweaks Mini-Games But Square Enix Says It Would Never Reduce Them
Square Enix has confirmed it tweaked its approach to mini-games for Final Fantasy 7 Revelation, but there are some things it won't change "no matter how much feedback we receive."
New ChatGPT Lockdown Mode Limits Tools That Could Enable Data Exfiltration
OpenAI Lockdown Mode limits outbound ChatGPT requests to reduce prompt injection data exfiltration risk for eligible accounts.
Office of Economic Development continues to provide small business energy efficiency grants
“Reducing energy use benefits individual businesses and strengthens our community as a whole as we reduce our reliance on the electrical grid,” said Kauaʻi County Office of Economic Development Director Nalani Bru.
Xbox Will 'Innovate' To Reduce The Price Of Project Helix, Suggests Asha Sharma
They're working on it as we speak
NM Health Care Authority announces $76M in federal rural healthcare funds
When fully implemented, the program aims to reduce long wait times, chronic disease risk factors and readmission rates to rural hospitals.
The top-two primary was supposed to change California politics. Did it flop?
California's top-two primary was designed to create moderate candidates and reduce partisanship. Instead, November races are as partisan as ever.
The Supply Side: Grocery business responds to GLP-1 use
The rising use of GLP-1 weight-loss drugs is reshaping consumer spending, which impacts food retailers and suppliers. About 1 in 8 U.S. consumers use drugs that reduce appetites and curb...
Popular weight-loss diet shows surprising impact on serious mental health condition
New UC San Diego research suggests the keto diet may help reduce anorexia nervosa symptoms, with 72% of participants scoring in the recovered or normal range.
Free Summer Entertainment Series returns with varied lineups despite reduced budget
The Fairfax County Park Authority has unveiled event lineups for this year's Summer Entertainment Series, which will feature more than 100 outdoor concerts, movie screenings and other free diversions. Kicking off with Springfield Nights at Burke Lake Park and Arts in the Parks at Frying Pan Farm Park on June 24, the 2026 offerings won't
Scientists finally crack an “undruggable” pancreatic cancer target and nearly double survival
For decades, pancreatic cancer has been one of the most lethal cancers, with few effective treatment options. A new drug, daraxonrasib, targets the KRAS mutation that fuels most pancreatic tumors—something many scientists once thought couldn't be done. In a major clinical trial, the treatment nearly doubled survival for patients with advanced disease and reduced the risk of death by 60%.
Home-Delivered Medical Meals Reduce ER Visits, Save Money
By Dennis Thompson HealthDay ReporterTHURSDAY, June 4, 2026 (HealthDay News) — Providing home-delivered, medically tailored meals to people with chronic health conditions lowers their risk of landing in a hospital, a new study says. Medicaid patients had fewer hospitalizations and ER visits while ...
Code Puppy: Walmart's secret weapon against AI lock-in
Walmart's viral Code Puppy AI tool helps avoid vendor lock-in, cut costs, and reduce dependence on Claude Code and Codex.
People taking common sleep drug may not realize they're too impaired to drive, study finds
A study found quetiapine reduced obstructive sleep apnea events but tripled attention lapses and impaired driving the next morning, researchers say.
Google wants to release 64 million bacteria-riddled mosquitoes across California and Florida. Here’s why scientists are enthusiastic.
Google has applied for an experimental mosquito release permit to deploy millions of non-biting southern house mosquitoes that it has infected with the bacterium Wolbachia pipientis, in an effort to reduce mosquito-borne diseases like West Nile virus.
Could lifting weights actually help you live longer?
Regular weight training can significantly reduce the risk of early death, research suggests.
Could environmental changes affect hantavirus risk? Duke researchers think so
As officials monitor a rare hantavirus outbreak, Duke researchers are examining how environmental changes may influence where disease-carrying rodents thrive. The findings suggest more diverse landscapes could help reduce disease risk.
Microsoft’s quantum chip got an upgrade. Critics are still skeptical
Swapping materials in its Majorana 2 chip boosted the effectiveness of quantum bits that rely on the math of topology to reduce errors, Microsoft says.
Atlanta takes steps to reduce number of arrests linked to mental health challenges
The number of people experiencing homelessness increased ahead of the FIFA World Cup’s arrival in Atlanta.
Microsoft Office 2019 for Mac Will Soon Stop Letting You Edit Documents
Microsoft will prevent Office 2019 for Mac owners from editing their documents from July 13, a restriction the company is attributing to the productivity suite's expiring digital certificate. The Office 2019 apps affected include Word, Excel, PowerPoint, Outlook, and OneNote. Once the certificate used to confirm the suite's license expires, these apps will drop into what Microsoft is calling "reduced functionality mode".
Rx Kids linked to reductions in preterm births and low birthweights, fewer NICU admissions
A pregnancy and postnatal cash prescription program in Flint Michigan has been linked to improved birth outcomes including reduced rates of low birthweight, preterm birth and NICU admission.
This blood-feeding fly sacrifices its sight after finding a host
Deer keds rely on flight and vision to find a host, but everything changes once they land. After shedding their wings forever, these parasites reduce the activity of key vision-related genes by about half. Scientists believe they are effectively trading sharp eyesight for extra energy that can be used for feeding and reproduction.
Local coffee chain donates over $20,000 to support mental health programs
Hyper Energy Bar partnered with NAMI Iowa to raise over $20,000 through a special drink campaign during Mental Health Awareness Month, helping fund mental health initiatives and reduce stigma.
AP report: U.S. to drastically slash the number of embassies in Africa that can process visas
The almost 50 U.S. embassies and consulates that are processing visa applications in Africa will be reduced to 20 “hubs” in the coming weeks, according to three U.S. officials and an internal memo obtained by The Associated Press.
Better sleep, improved health, happier people: how ‘cool roofs’ could help millions avoid deadly heat
A project to measure how reflective paint reduces indoor temperatures is delivering tangible benefits across Africa
Closing Michigan’s growing healthcare gap
Detroit employers and unions adopt advanced primary care to reduce costs, improve access and address care gaps.
EU Proposes Tax Simplification Measures in Bid to Boost Business
The European Union will propose a streamlining of rules and exemptions in the area of taxation, its latest effort to reduce bureaucracy.
Quitting smoking could offer a major benefit beyond heart and lung health, study finds
New research analyzing over 32,000 adults over 25 years suggests quitting smoking may reduce dementia risk and support long-term brain health.
Omega-3 fish oil shows promise against type 2 diabetes
A new study suggests fish oil may help reduce insulin resistance even in people who aren't obese. In diabetic rats, omega-3 supplementation improved blood sugar levels, cholesterol, and inflammation by shifting immune cells into a more anti-inflammatory mode.
New device could make processors run 1,000 times faster without additional waste heat — scientists say it could reduce data center energy demands
A new device could allow computer processors to operate significantly faster, without generating waste heat.
New device could make processors run 1,000 times faster without additional waste heat — scientists say it could reduce data center energy demands
A new device could allow computer processors to operate significantly faster, without generating waste heat.
Repairing DNA damage: Scientists discover a surprising new benefit of melatonin
A new study suggests melatonin supplements may help night shift workers boost their body's DNA repair processes, potentially offsetting some of the damage linked to working overnight. The findings are early but raise the possibility of a simple strategy to help reduce long-term health risks associated with night shift work.
Scientists develop 'smart paint' that reflects 97% of sunlight and could reduce AC use during heatwaves
As heatwaves become more frequent and intense around the world, scientists are exploring new ways to keep buildings cool without increasing energy consumption. Researchers at the University of Sydney, working with startup Dewpoint Innovations, have developed a nano-engineered coating that reflects up to 97% of sunlight and stays significantly cooler than conventional surfaces.
Mamdani launched his own version of DOGE
Mayor Zohran Mamdani is launching his own government efficiency effort to cut red tape and reduce unnecessary spending in NYC.
Beyond the Save: Why Mental Health Matters to URFC’s Mandy McGlynn
By: Isabella Rubis The month of May was chosen by Mental Health America in 1949 as a dedicated time to focus on mental wellness. The month-long spotlight is important to reduce the stigma surrounding mental health, educate the public and amplify the voices of athletes like URFC goalkeeper Mandy McGlynn
Windows 11's new update actually makes your PC faster. Here's how to get it
Windows 11's new optional May update KB5089573 reduces app launch lag and UI stutters. Here's what it does and how to get it early.
Ebola, chemical plants and health, hantavirus, common colds, heat and more
As they say, bugs have ears. Public health has had a relentless May. Chemical plant (near) explosions, Ebola, hantavirus, and that's before you even get to the usual suspects: common colds, heat, and ticks. Here’s an attempt to keep you up to speed and, more importantly, what it means for you and your community. But first, an announcement: World Cup The World Cup starts in 15 days (not like anyone is counting down), and we are hanging TVs in the Health Security Operations Center. It’s going to be a gorgeous, chaotic celebration of basically every culture on earth. And it’s going to take a team effort—from communities to individuals, from public health to health care—to keep people healthy. That’s where you come in. If you’re going to the games or live within 30 miles of a stadium, we would love to hear from you. Sign up for a weekly survey here. Thanks to the more than 1,280 people who have already signed up…you will be hearing from us soon!! Global disease “weather report” Hantavirus: Two more cases The global count of cruise ship passengers with hantavirus has now increased to 13 cases (11 confirmed), with three deaths. The two new cases are overseas and among people who were already quarantining: A crew member in the Netherlands. A Spanish national passenger who was quarantining at home tested positive through daily monitoring. They are now in a biocontainment unit. In the U.S., everyone remains negative. There may be more cases, given that the incubation period of hantavirus (the time from exposure to infection) is 45 days. But this week, we will reach a major milestone: the median incubation window is 18 days, and that will pass on May 29. What this means for you: Your risk from this cruise ship outbreak remains essentially nil at this point. Ebola rages on in Central Africa Big thanks to Dr. Craig Spencer, a humanitarian physician who has treated and survived Ebola, for jumping in to provide the YLE community with an update. Craig, take it from here… The combined confirmed and suspected Ebola cases in DRC are now more than 1,000. All signs are pointing to a very long and catastrophic outbreak in Central Africa: This is a vast undercount. We know this because the test positivity rate is hovering around 50%, only 20% of contacts are being traced (and in some areas, no contacts at all), and more cases keep popping up with no known connection. This all points to widespread and undetected community transmission. This is in only a week of detection. Compared to previous outbreaks, the growth is very fast, as the huge West Africa outbreak in 2016 was first detected at 49 cases and rose to 208 cases a month later. It took four months for that outbreak to reach the size of the current one in the DR Congo. The cases are spread out across 16 health zones. There are now multiple epicenters, making containment very difficult. Next door in Uganda, the case count is seven. While this number is low compared to DRC, a concerning development is that two health care workers recently tested positive with uncertain exposure histories. If they weren’t treating known Ebola cases, this means it’s spreading undetected in Uganda as well. On the ground, backlash, including the burning of health centers, has emerged, a pattern seen in nearly every outbreak and rooted in deep community distrust. It often stems from outside actors working in communities without fully understanding or addressing local priorities. Affected populations may recognize the severity of Ebola while still holding other concerns as more pressing, such as where their loved ones are buried. Community trust is essential to an effective response, but difficult to build during an active emergency. It is best established long before a crisis begins. U.S. priorities are made clear, and may backfire. The U.S. Administration has shown that its first priority is keeping Ebola out, with helping end the outbreak in the DRC a secondary concern. That's meant travel restrictions broader than anything we've imposed before — covering travelers from across the region, and reportedly some green card holders and permanent residents as well. For example, just these past two days, news broke that high-risk American travelers will be subject to a mandatory quarantine in Kenya before they are allowed to return. If an American is infected, the U.S. government plans to send them to a hospital it is standing up from scratch in Kenya. (Currently, Americans who were in the area are allowed to return but are diverted to three airports—Houston, Atlanta, and DC—for further screening.) Past administrations have used travel notices and stepped-up screening; this goes much further. At first blush, these strict precautions may sound prudent. But this approach could backfire in three ways: Restrictions this blunt give people every reason to hide where they’ve been and whom they’ve been near — making the people we most need to find harder to track, not easier. They also breed a false sense that this is someone else’s problem. But diseases are humbling. They find the small cracks in even the most impenetrable-seeming defenses. Lives lost. There is no treatment for this Ebola strain, which means survival depends heavily on the quality of the health system. We have that system in the States, but we are choosing not to use it for infected Americans. This is unbelievable and infuriating. (See a deeper dive from me here.) The only real way to lower the risk to Americans — and everyone else — is to end the outbreak in the DRC and across the region. What this means for you: If you have travel plans to this region, it’s time to cancel them. This is a high-risk situation in Central Africa, and CDC released a Level 4 Travel Advisory. There is also great uncertainty if and when the Administration will let you back in. To the general public in the U.S., your risk remains very, very low right now. U.S. disease “weather report” Ticks: past peak season? Good news, especially for people in the Northeast and Midwest: tick numbers continue to decline. Though we are at the peak of the season, this unusually early year is trending favorably. Heat-related illnesses in the North Heat risk is certainly not blanketing the entire country yet, but this week it will be moderate in the Midwest and the Southeast. What this means for you: Be sure to check the CDC HeatRisk tool. A red day isn’t the best day for that soccer game for a kid with asthma, and a stretch of orange days is a great time to check on your elderly neighbor. Common colds surging As far as respiratory viruses go, the only thing really going around right now is the common cold. It is higher this year than last year, but should peak very soon before returning this fall. Spotlight: Chemical plants Over the weekend, YLE California covered the serious situation that unfolded around a chemical plant in Orange County, California. Thankfully, the worst-case scenario (a chemical explosion) was mitigated, but only through luck. The health implications in a densely populated area could have been catastrophic. As the situation was winding down, another chemical explosion struck Washington State. This one was fatal. Health officials say the risk to surrounding residents from chemicals in the air and ground remains low, though the community deserves far greater clarity. Clean air and clean water consistently rank as Americans’ top public health concerns — yet when chemical disasters strike, communities are too often met with reassurances rather than transparency and accountability. Residents near the 2023 East Palestine, Ohio train derailment, for example, are still waiting to understand the long-term impact on their health, with few clear answers. What this means for you: Many are wondering if facilities processing potentially dangerous materials are in their neighborhoods. This interactive map allows you to enter your ZIP code and see all facilities monitored by the EPA, including any violations. Good news Ebola vaccines and treatment for the Bundibugyo species are in development. Two vaccine platforms are being explored, at least one of which may be deployable in as little as 2 months. One vaccine is being developed by Oxford, and the other uses the same biotechnology as the FDA-approved Zaire species of Ebola. (It may provide cross-protection, but it’s unclear at this point.) On the treatment side, two promising monoclonal antibody cocktails are likely to be deployed, though doses are limited and logistical hurdles remain significant challenges. Anni over at The Biotech Tea had a great explainer about the Ebola vaccine gap, if you want to read more. [ The Biotech Tea The Ebola vaccine gap, reading vessel damage, & the Makary exit 🗝️ Paid subscribers get the Biotech Term of the Week at $30/year (~$2.50/month). I try to keep it intentionally accessible, but if cost is ever a barrier, send me a message. A few people asked about expensing your subscription, so I put together a short email template… Read more 6 days ago · 10 likes · Annicka Evans, PhD ](https://www.thebiotechtea.com/p/the-ebola-vaccine-gap-reading-vessel?utm_source=substack&utm_campaign=post_embed&utm_medium=web) Polycystic ovary syndrome (PCOS) has been officially renamed polyendocrine metabolic ovarian syndrome (PMOS), following more than a decade of debate and input from roughly 22,000 clinicians, researchers, and patients worldwide. This is good because the old name was medically misleading, leading to patients without visible cysts being dismissed or overlooked entirely. The WHO estimates that 70% of people with the condition remain undiagnosed. A more accurate name should improve recognition, reduce stigma, and ultimately help the millions of people living with this condition get diagnosed and treated sooner. Poll Loading... Bottom line Public health situations are everywhere right now. Staying healthy takes public health professionals and systems working tirelessly behind the scenes and each of us showing up for our neighbors and communities. Love, YLE Big thanks to Ed Nirenberg for staying on top of the Ebola vaccines, Hannah Totte for all the figures, Dr. Craig Spencer for the Ebola insight, and Dr. Matt Willis for covering the chemical situation in CA. Your Local Epidemiologist (YLE) comprises a team of experts, ranging from physicians to immunologists to epidemiologists to nutritionists, working together with one goal: to “Translate” ever-evolving public health science so that people are well-equipped to make evidence-based decisions. YLE suite of newsletters reaches over 475,000 people across more than 132 countries. This newsletter is free to everyone, thanks to the generous support of fellow YLE community members. To support the effort, subscribe or upgrade below: Subscribe
High-Level Climate, Clean Air, and Health Roundtable
Reducing air pollution and climate pollutants represents one of the most immediate opportunities to protect human health while advancing climate goals and driving economic growth. Actions to reduce super pollutants such as methane and black carbon can rapidly slow warming while significantly reducing the global burden of disease linked to air pollution. These health benefits reduce pressures on health systems and improve labour productivity, supporting economic growth.
Science Says You're Probably Making Smoothies Wrong, and I've Never Felt More Validated
A new study suggests adding a banana to berry smoothies may significantly reduce flavanol absorption, a victory for one banana skeptic.
Yerba mate has lots of health benefits but Chinese may be drinking it wrong
Ancient South American fusion may reduce risks of Parkinson’s and is enjoyed by top footballers, but the indigenous drink should be shared.