SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " would " 5,274 found 🔀 AI-powered Shuffle
Senate approves sweeping college sports bill on athlete pay, transfers and NCAA rules
WASHINGTON – The Senate approved a bipartisan college sports overhaul that would codify athlete revenue sharing, regulate NIL and transfers, and give the NCAA limited antitrust protection. Critics say it undercuts athletes’ leverage.
Christy Carlson Romano recalls trying cocaine for the first time and liking ‘the attention I got’
The Disney Channel alum admits she had been “aggressively clubbing” in her early 20s hoping the paparazzi would notice.
Jeffries: 'Epstein cover-up in on the ballot'
New York state Sen. Zellnor Myrie says he’s planning on reintroducing legislation that would allow victims of Jeffrey Epstein and other abusers to seek punitive damages from deceased perpetrators’ estates.
Ranking Member Markey: SBA Administrator Loeffler, Trump Administration are Refusing to Answer to America’s 36+ Million Small Businesses and Workers, Leaving Main Street Behind
Loeffler canceled her scheduled Sept. 30 appearance before the Senate Small Business Committee, has not appeared before SBC in more than a year (Washington, September 28) – Ranking Member Edward J. Markey (D-Mass.) today released the following statement after Small Business Administration (SBA) Administrator Kelly Loeffler canceled her scheduled Wednesday appearance before the Small Business and Entrepreneurship Committee. Administrator Loeffler has not appeared before the committee in more than a year and has consistently refused to provide substantial answers to committee members in person, in writing, or via requested briefings. In June, Ranking Member Markey led every Democratic member of the committee in calling on Administrator Loeffler to appear before the committee to answer for the Trump administration’s cruel attacks on American small businesses, entrepreneurs, and workers. The Democratic lawmakers still have not received a response from Administrator Loeffler. “It is unacceptable that Administrator Loeffler chose to cancel her appearance before the Senate Small Business and Entrepreneurship Committee. The Trump administration is once again ignoring the more than 36 million American small businesses, entrepreneurs, and workers who drive our economy and enrich our communities by refusing to answer questions about this administration’s reckless economic policies. It has been more than a year since Administrator Loeffler has appeared before our committee and answered questions from both Democrats and Republicans. Since then, the Trump administration’s attacks on Main Street have only worsened. “Small businesses are facing record high gas and diesel prices, skyrocketing healthcare costs, and never-ending uncertainty from Trump’s trade war with the world. Trump has terrorized Main Streets across the country with violent ICE raids, destroying families, communities, and local economies. Meanwhile, Administrator Loeffler and the Trump SBA have been in a Witness Protection Program, ignoring the Pain on Main Street that they have created. They have chosen to make drastic cuts to SBA funding and essential, bipartisan programs, including the closure of the SBA office in Springfield and removal of the SBA office from Boston; directly attacked immigrant small business owners and destroyed the promise of the American Dream; and proposed shortsighted small business size rules that would benefit billion-dollar businesses over actual small businesses. “It’s clear that Administrator Loeffler, President Trump, and their CEO billionaire buddies want to turn the Small Business Administration into the Big Business Administration, tear down our economy, and abandon Main Street. If that is indeed this administration’s goal, Administrator Loeffler must answer to the millions of small businesses, workers, and families in Massachusetts and across the country that this administration is leaving behind.” ###
Anne Hathaway’s doctor won’t let her do this to promote ‘Verity’
Anne Hathaway’s doctor wouldn’t let her go on ‘Hot Ones’ to promote the thriller film ‘Verity’ because she might go into early labor.
I Never Thought “Explosive Diarrhea” Would Become a Reason to Vote Blue, but Here We Are
These foodborne illness outbreaks have certainly put the Republican party in a sh*tty situation.
Jackson business, political leaders call on feds to reject baseball park inside Grand Teton
Even a temporary field on already-disturbed land would do damage, letter says.
Jackson business, political leaders call on feds to reject baseball park inside Grand Teton
Even a temporary field on already-disturbed land would do damage, letter says.
The Next Bioweapon Could Attack Our Genes Instead of Our Bodies. I Promise You We’re Not Ready for That.
The most devastating weapons conceived by humanity cause cellular damage as a side effect. What would happen if the genetic mutation itself were the nefarious goal?
Casey Affleck says childhood friend Matt Damon was a ‘show-off’ when they were kids
The actor, whose older brother Ben Affleck was Damon’s childhood best friend, said there was “no doubt” that “The Odyssey” star would succeed in Hollywood.
Bobby Kotick’s lawyers sent me a bad email (and later apologized)
The message I had received was unsettling—for a moment. Then it was just really confusing. Back on January 20 of this year, at 5:15pm ET, I received an email with the subject line “Legal Correspondence re Bobby Kotick.” It was from the law firm Clare Locke, a firm I’d heard had been emailing reporters in recent years about their coverage of Kotick, the former, longtime CEO of Activision Blizzard. The letter was threatening. A lawyer from the firm introduced themselves as “defamation counsel to Bobby Kotick.” They issued a “demand” that I “correct” a Game File article I’d published a week prior. The article that had irked them had been a scoop of sorts. I’d written about a a 2022 lawsuit brought by a Swedish pension fund, AP7, over Microsoft’s purchase of Activision Blizzard. The suit wasn’t news, but I was first to review and report about Kotick’s extensive pushback to the fund’s claims. The pension fund’s core contention was that the sale had been rushed by Kotick to avoid the consequences of sexual misconduct scandals swirling around the company in 2021. (He’d not been accused of misconduct himself in those suits, to be clear.) As I wrote at the time, Kotick had denied the allegations of the rushed sale. Beyond that, Kotick used a December 2025 reply to the Swedish fund’s lawsuit to assign blame for those workplace scandals, the bad press and even for the AP7 lawsuit. I’d found Kotick’s arguments novel and newsworthy. Across nearly 3,000 words, I explained Kotick’s take: that a Swedish gaming company was behind the Swedish fund’s lawsuit (the Embracer group; they denied it); that the Microsoft-Activision deal was not rushed and was secured at what Kotick felt history had proven to be an optimal price for shareholders; that he believed a conspiracy of people at unions government agencies, PR firms and the media had spun up claims of widespread workplace misconduct at Activision Blizzard in 2021. The article gave context for all of this, letting readers assess the claims and weigh their credibility. As I’d later write to Kotick’s lawyers: I would be surprised if you could point to any news article about Bobby Kotick in the last five years that has spent more of its wordcount articulating his point of view. He is welcome to do an interview with Game File any time. Nonetheless, there they were in my inbox that Tuesday evening: Clare Locke, the law firm that secured a $787.5 million settlement from Fox News over false statements about voting machines. They were emailing me, threatening that failure to comply with their demand could support a claim of “actual malice,” a legal standard for libel. Unless… Unless, they said, I added a key paragraph to my article. This was a paragraph that I already knew Kotick’s lawyers had been emailing reporters about for at least a year, and it was a paragraph that was already in my article. The paragraph they wanted is from a 2023 settlement that California’s Civil Rights Department struck with Activision Blizzard. The settlement had closed a two-year-old lawsuit over alleged sexual discrimination at the game maker. The paragraph basically said that claims of systemic or widespread sexual harassment—or of execs like Kotick tolerating such behavior—had never been proven. I’d already seen proof that Kotick’s lawyers had pushed for the settlement’s language to be added to reports about 2021 sexual discrimination and misconduct lawsuits brought against Activision Blizzard by California and, separately, by the U.S. federal government (both suits were since settled). I knew that Kotick and his lawyers felt that the California settlement language should be mentioned in the same breath as references to an article he hated and denied, a November 2021 Wall Street Journal article claiming Kotick knew “for years” of sexual misconduct at Activision Blizzard. So, in the Game File article that Clare Locke emailed me about, in the interest of ensuring I was being fair and balanced regarding the person I was covering, I had already included the following excerpt from the California settlement [emphasis added in bold]: (Kotick has repeatedly pushed back against that November article in the Wall Street Journal, citing among other things, language from a court-approved consent decree as part of Activision’s 2023 $54 million settlement over the California suit. It states: “no court or any independent investigation has substantiated any allegations that: there has been systemic or widespread sexual harassment at Activision Blizzard [or] that Activision Blizzard senior executives ignored, condoned, or tolerated a culture of systemic harassment, retaliation, or discrimination.”) On the evening of January 20, I was incredulous. How do you write a four page legal threat about a week-old article and miss this? While scrambling to also make my kids dinner, I wrote a lengthy reply to Clare Locke’s lawyers, basically asking them to cool it with the threats and to start making sense. In part, I wrote: I hope you can understand why I am having trouble understanding what you’re asking for, when the statement you’re demanding to see in Game File’s article already appears in Game File’s article. Actual malice, as you know, refers to a reckless disregard for the truth. I’m not sure what your argument is when my article already states your client’s position. Here is where I should remind you, the reader, that I am an independent journalist. I publish on Substack, and have availed myself of the Substack Defender program that provides writers on the platform with legal support. But I’m no Wall Street Journal or New York Times, nor even IGN or GameSpot when it comes to such things as, well, having a legal department. There are more fun things for me to do as an independent journalist than writing back to a powerful law firm representing a very rich person. On the evening of January 20th, I was just trying to cook some pasta, broccoli and chicken nuggets for hungry twins. Nevertheless, I wrote back to them. Two hours later, I got a reply. Summarizing: A lawyer for Clare Locke said they’d “reviewed an incomplete version” of my article and they “apologize for the confusion.” (My guess: Someone didn’t read past the piece’s paywall, even though they’d had a full week to scrounge up the funds to do so. What I’d published above the paywall was balanced, as was what came after.)1 That was almost that, but something about the situation bothered me. The letter had been marked “confidential.” I hadn’t agreed to that, and I disliked the idea that powerful people on the beat that I cover would act like they could unilaterally control what I might tell my readers about. On the morning of the 21st, having already gotten the powerful law firm to back off, I oh-so-wisely re-approached them with just one more thing. I thanked them for clearing things up the night before but noted that I’d never agreed to keep their letter confidential. I’m all for agreeing with a source to keep things off the record, but that’s the thing. We have to agree. You can’t just declare it. I’m not bound by that. I wrote to Clare Locke’s lawyer and said, in part: I trust the matter is resolved. It was disappointing to have to spend less time with my kids last night in order to address your legal letter. Family time’s precious. I will add, for clarity’s sake, that, while your letter stipulated that it was confidential, I did not agree to those terms. In the future, should you wish to communicate with me confidentially, I am happy to agree to classifying our communication as “off the record” prior to the actual communication—as is standard with any professional journalist. The firm’s lawyer replied, not directly addressing the confidentiality issue but asserting that the matter was resolved. Why I didn’t write about this until now In May, I told this story on an episode of Simon Parkin’s podcast My Perfect Console, but I held off on sharing it directly with Game File readers. I held off to avoid stepping on the toes of another reporter, the journalist Mikhail Klimentov. He’d interviewed me in the spring of 2025 about an investigation he was working on regarding Bobby Kotick lawyers pressing the media to add the California settlement language to stories referencing the 2021 lawsuits. And about how some outlets had changed their stories and how some simply deleted them. Initially, I was a third-party source for Klimentov’s reporting, providing on-the-record context about the state of the games media. I’d heard about the letters but hadn’t put the time into pursuing the story. I thought it was interesting, and I was glad he was covering it. When the outlet that Klimentov was going to run his reporting in dropped the story, I began talking to him about potentially publishing his reporting on Game File. This was tentative. Then, in January, when I got my own Clare Locke letter, I told Klimentov that I didn’t think it would make sense for me to publish him, not with me now being part of the story. I had my own version of this situation to tell. But I wished him well and said I’d refrain from telling my tale until he could get his reporting out there. Last Friday, Klimentov finally ran his investigation, in a nearly 48-minute video report for People Make Games. It covers various Clare Locke letters, how media outlets reacted to them and what to make of all this. His video weighs the merits of Kotick’s request and looks at some of the articles that were changed (one of which had a glaring error). I highly recommend watching it: (Note, I did some editorial consulting for a People Make Games video last year but nothing to do with this report.) While many outlets haven’t left any public evidence that they updated their Kotick coverage at Kotick’s counsel’s request, at least one has. Back in October 2025, the mainstream outlet Reuters applied the most transparent article update I’ve seen. On the 3rd of the month, they published an article about the state of the Swedish pension fund’s lawsuit. Days later, they added this: In an October 7 letter sent after publication of this article, Kotick’s defamation counsel disputed claims of widespread harassment at Activision. “Not a single investigation, court finding, verdict, or ruling ever concluded that there was any merit” to the allegations of widespread harassment at Activision, Tom Clare and Nick Brechbill of Clare Locke wrote. I’ve never added a statement to my article on Game File, because none was needed. Not for fairness’ sake, nor to meet any demands of Kotick’s lawyers. I’ve nevertheless wanted to be transparent with Game File readers. If someone powerful is questioning my reporting, is threatening a lawsuit over it… if that threat is part of a pattern involving other games media outlets and if, in my case, the whole thing ran into a ridiculous ditch, I want you to know about it. I also share this as a real example of how I handle threats to Game File. I stand up for my own reporting, even when it’s not comfortable to do so. (In that same category of standing up for the work I do, I’ll point to an incident in late August. Asocial media post I published to X/Twitter regarding reporting I did about Take Two and GTA VI was hit by bogus copyright claim by a firm working for the publisher. I pushed back and got it reversed; even while a bigger games media outlet let themselves be censored. This is the other reason I’m sharing this story: To emphasize that dealing with threats from powerful people is one of the costs of covering the video game industry independently and as fearlessly as possible. This is where you come in. Your support, through free and paid subscriptions (sign up here!), can help me keep doing that. It can ensure that I’ve got the back-up I need. And it can help make fiascoes like this even less of a worry, so I can spend my evenings dealing with more important things, such as making sure I steam the kids’ broccoli just right. 1 That pension fund lawsuit I wrote about in January has all but gone away. In May, the fund and Activision Blizzard owner Microsoft agreed to settle. Lawyers for the fund brokered a $250 million settlement for former Activision Blizzard shareholders. In the settlement, the fund’s lawyers changed their rhetoric. Where once they’d questioned the meaning of the California settlement language, they adopted a version of it for themselves. Several weeks ago, while seeking to get a court to sign off on the terms of the settlement, they proposed their fee for their work in the case: $60 million.
Newsom vetoes bills aimed at insurance reform sought by wildfire survivors
Supporters of the bills said would give policyholders greater transparency and accountability when insurance companies delay or underpay claims
Behind the Science with Paleontologist and Curator of Dinosauria Dr. Matthew Carrano
Is the 21st Century the real Age of Dinosaurs? Today, more paleontologists are discovering more dinosaur fossils from more places in the world than ever before. Our understanding of these amazing creatures has leapt forward while their popularity has surged. Museums sit at the junction of these phenomena. The Smithsonian has been a center for dinosaur research for more than a century, and its collections include many iconic and scientifically important specimens. Today, Smithsonian researchers continue to discover new dinosaurs, but they are also uncovering more information about the ones we already know and love. New techniques and approaches allow them to investigate aspects of dinosaur biology, ecology, and evolution in ways that would have been inconceivable to early paleontologists. The result is an ever-improving understanding of dinosaurs as living, breathing, and thriving animals. This month, go behind the science with paleontologist Dr. Matthew Carrano, Curator of Dinosauria at the National Museum of Natural History as he discusses new discoveries at home and abroad, in the field and in the museum. Registration is encouraged. Space is filled on a first come first served basis. ---------------- About the Series: Behind the Science A monthly after-hours series featuring NMNH scientists and researchers Each month, join the National Museum of Natural History for the new series, Behind the Science, where NMNH researchers share insights into their latest discoveries and explore the fascinating questions driving their work—from the origins of life to the future of our planet. Come learn what’s happening behind the scenes and how science shapes our understanding of the natural world. Programs take place in Q?rius, the Coralyn W. Whitney Science Education Center. Topics and speakers announced on a rolling basis, but save the dates now!
Senate is set to vote on a sweeping college sports bill. Here's what it would do
The bipartisan Protect Student College Sports Act would give the NCAA more power to govern national rules and regulations in college sports.
Late Night Fun with Evolution and Oppenheimer
Bats by the millions would be falling from the roofs of caves if that ankle-locking design, an all-or-nothing proposition, had not come about all at once
Scientists Find Microbial Life Could Survive on Saturn's Icy Moon Enceladus
Researchers created a mini Enceladus in the lab to see how microscopic life would fare in the moon's ocean.
Will hackers use your own AI against you?
Businesses have spent years asking what AI can do for their employees. Fewer have asked what it would do for an intruder inside an employee’s account.
Allegheny County Board of Health passes paid parental leave program
The Allegheny County Board of Health on Monday approved an updated paid parental leave program that would require businesses with 15 or more eligible employees to provide at least 12 weeks of paid leave to new parents. The Board of Health approved the proposal in a unanimous vote. The board
Senate tees up college sports bill aimed at regulating NIL deals
The Senate is due to vote Monday on the bill, which would create a national framework for name, image and likeness deals in college athletics.
How Much Would It Cost To Build A PC Equivalent To The PlayStation 5 Pro In 2026?
The cost of Sony's top-of-the-line PlayStation 5 Pro has risen significantly over the past year, but how does it stack up to a PC with similar specs?
GOP senator says buildings shouldn't be named after living politicians
Sen. John Kennedy says politicians should not have buildings named after them while alive. "I think that would settle a lot of this controversy."
GOP senator says buildings shouldn't be named after living politicians
Sen. John Kennedy says politicians should not have buildings named after them while alive. "I think that would settle a lot of this controversy."
Senate nears vote on college sports bill that would rein in athlete payments and transfers
The Senate is poised to pass a sweeping bipartisan bill that would regulate college sports.
Senate nears vote on college sports bill that would rein in athlete payments and transfers
The Senate is poised to pass a sweeping bipartisan bill that would regulate college sports.
Senate Nears Vote on College Sports Bill That Would Rein in Athlete Payments and Transfers
WASHINGTON (AP) — The Senate is poised to pass a sweeping bipartisan bill on Monday that would regulate college sports, an attempt to end “chaos” in an industry that has been upended by skyrocketing athlete payments and near-unrestricted transfers between schools. Passage of the legislation would be ...
Senate Passes Pilot Mental Health Bill
Measure would require FAA changes to medical certification and mental health policies.
Denise Richards honors late ex Patrick Muldoon on his first birthday after death, posts photo of their ‘last hug’
Richards shared a tribute to her “Starship Troopers” costar and former partner on what would’ve been his 58th birthday.
Defensive concerns and possible transfers
Graeme: I wouldn't bet against the club bringing in a couple of additional players to freshen up the squad, but I would envisage that, before anyone else arrives, someone is likely to leave. Hayden asked: We seem to have some decent firepower this season, but can Ipswich get away with having pretty much a Championship defence? Graeme: I share concerns about Town in that part area of the pitch, but I think 'Championship defence' might be a tad harsh, Hayden.
Gautam Mukunda: The incentives for entrepreneurs have become warped
A recent New York Times investigation found that sports betting company DraftKings Inc. built a machine-learning model that scored customers by how much they would lose for each free bet
‘Starship is in orbit’: cheers go up as huge SpaceX rocket circles Earth for first time
Mission goes ahead despite some fears an initial engine failure after the Texas launch would scupper the attempt
Scanning the waiver wire for intriguing options
The Penguins would probably figure to not use waivers to boost their lineup, given all the depth they already have. However with four players placed on IR yesterday plus the statuses of Bryan Rust (injured) and Andrei Kuzmenko (personal) still up in the air for the start of the season, the waiver wire could hold […]
Shapiro Administration's Controversial Health Regulations Dropped, For Now
(The Center Square) – New regulations that critics said would give the state Department of Health power to enter private homes without a warrant were withdrawn late Friday. The news comes just days after the Independent Regulatory Review Commission’s public comment period for the 502-page proposal ended. In a letter…
Nvidia announces the biggest share buyback in history
Nvidia said on Monday that it would it expand its overall buyback program to $235 billion, the biggest in stock market history.
Klopp accepts responsibility as Germany suffer Greece defeat
Jürgen Klopp admitted Germany’s defeat by Greece was partly down to his own decisions, but insisted the setback would provide useful information as he continues to rebuild the national team.Germany...
What do the numbers tell us about Hogh's Celtic start?
It is fair to say Kasper Hogh has not had the start he or Celtic would have wanted after the club spent a club-record fee to sign the Denmark striker from Bodo/Glimt. Having bagged 53 goals in 102 appearances for his previous team, a handful of which came in the Champions League against top-level opposition, the 25-year-old arrived to fanfare following the signing of fellow big-money capture Camilo Duran. Now, with Martin O'Neill's men on a three-game losing run, serious questions are starting to be asked after Hogh's underwhelming introduction.
98-year-old business says 'we don't qualify' for Nashville legacy incentive proposals
Delgado Guitars has been helping Music City strum since 1928 but says none of the Nashville Mayor's proposed small business grants would help them, writing they
NC State a 6.5-point underdog to Louisville
NC State dips back into conference play with the toughest opponent on its schedule this season, the Louisville Cardinals. It would have been a good idea to come into this one with a record better than 2-2, but Louisville is probably thinking the same thing. The Cardinals are coming off a surprising three-point home loss […]
Saturn's frozen moon could host alien life, say scientists | BBC Sky at Night Magazine
Saturn's icy moon Enceladus would theoretically be able to host some forms of microbial life, according to a scientific study.
Contraceptives out of reach for thousands of low-income Iowans
Two recent studies cite the difficulties low-income Iowans have in getting contraception. One thing that would help: Evening appointments for those working multiple low-income jobs.
Bipartisan bill would protect MD small business deposits
Commentary: U.S. Senators introduce the Main Street Depositor Protection Act to raise deposit insurance for small business accounts.
Health Tech Keeps Choosing Violence
Last week was an absolute dump of health tech litigation mayhem, with enough new filings to make my wife seriously question my bedtime reading. Here’s what’s inside: OpenEvidence v. Doximity: Doximity didn’t wait for the deadline. It wants OpenEvidence’s case thrown out entirely, and its motion adds some awkward details about vanished Slack data and borrowed NPIs. Plus, Epic v. Apple offers a look at what a normal discovery fight looks like. Texas v. Epic: Epic took another shot at the State’s antitrust pleadings, asking the court to make Texas spell out how its employment restrictions harm competition and why Texas law reaches a Wisconsin company’s noncompetes. Veeva v. Epic: The two Wisconsin law professors finally weighed in on whether a would-be employer can challenge someone else’s noncompete. Audacious Inquiry v. CRISP: Our sleepy patent case just evolved into a much more interesting form, with CRISP firing back with attempted monopolization and information blocking counterclaims. Cognizant v. Infosys: After weeks of emails and phone calls, I finally have Judge Starr’s sealed ruling on Infosys’s antitrust counterclaims. Some survived, offering clues about where the Epic (and other system of record) antitrust cases stand their best chance OpenEvidence v. Doximity
Nuclear reactors, data center campuses, gas-powered plants proposed in Iberville, Ascension
If completed, the project would add an extra 20% to Louisiana's electricity generation capacity.
After Taxi Driver Deaths, Union Pushes Mamdani for Health Fund
Several New York City cabbies were recently found dead in their cars. A taxi union is seeking to revive a fund that would provide medical screenings, disability insurance and other benefits.
AMC Entertainment (AMC) Plans $3.97 Billion Refinancing. Can It Buy More Time?
AMC Entertainment Holdings, Inc. (NYSE:AMC) launched a $2 billion offering of first-lien notes due 2031 and an $850 million first-lien term-loan syndication on September 21. It also secured a conditional commitment for a $1.12 billion second-lien term loan, dependent on completion of the first-lien financing and other conditions. The proposed $3.97 billion package would replace […]
Glamorgan welcome best ever Division One finish
Glamorgan captain Kiran Carlson says the team "would have bitten your hand off" at the start of the year to finish sixth in the Championship's top flight.
Did your favorite local Starbucks just close? These 36 SoCal locations are likely shuttered
Starbucks said it would close 250 locations in North America as the chain battles increased competition. Thirty-six of those locations appear to be in Southern California.
See the brilliance: Dunn artist creates and sells glass artwork that shines brightly
Cindy Akers-Gilford creates stained glass, fused glass, mosaics, handmade glass jewelry, pendants, suncatchers and other original glass artwork in her studio in Dunn, N.C. Photos provided by Cimply Broken.Self-made Artist and Founder of Cimply Broken, Cindy Akers-Gilford is helping people “see the brilliance” in all things with her glass artwork. Akers-Gilford started her business right after she retired from 20+ years as a civilian contractor at Fort Bragg. The official opening date for Cimply Broken was Nov. 8, 2021.“It’s been quite the adventure ever since. Not only did I have to learn how to manage a small business, but I’ve never taken a class in stained glass or anything I currently do,” shared Akers-Gilford. Her work includes stained glass, fused glass, mosaics, handmade glass jewelry, pendants, suncatchers and other original glass artwork.“I chose glass art just by happenstance. I saw a video on YouTube with a gentleman using plates and resin to make beautiful windows. I used that idea and created a simple picture frame-sized piece for myself. It was beautiful. I put it up in my window and pretty much forgot about it for a few days. Well, one beautiful sunny morning I went up to my studio, and the sun was rising and the light was shining beautifully through that piece. It was absolutely stunning. I thought that it was the perfect reflection of how God’s light shines through each of us. It was broken glass, so it changed ever so slightly as the sun continued to rise in the sky. I thought it poignant – like each of us – we all shine bright and differently in God’s glorious light, and we are all simply broken as well. We are all made beautiful in his light,” explained Akers-Gilford.The name of the business was inspired by the artist’s name and her faith-driven mission. “Simply became ‘Cimply’ as a play on my name and ‘simply’… and ‘Broken’ because we are all Cimply Broken – but each of us is beautiful,” added Akers-Gilford.Akers-Gilford sells her glass art at the Dunn Farmers Market when the weather is bearable, but mostly from her website at www.cimplybroken.com. “I enjoy getting lost in the creative process. I work out of my home, and I often compare my studio to Walmart returns after Christmas time. It’s hectic, busy and there are always at least 10 things being created simultaneously- it is fun!” shared Akers-Gilford. Her goal for the business is to continue to watch customers as they spot a piece of work from a distance and walk up to it in awe. “That is my biggest joy! I don’t speak to them until they speak – that is their moment to ‘See The Brilliance,’ which is my moniker,” shared Akers-Gilford. She also shared she would love to someday become part of an artist collective in Dunn.
Art that serves others: How a Harnett County muralist is making a lasting mark in her community
Van Goat Studios, which has been operating since 2019, has allowed Johnson to express herself and reflect the spirit of local communities through murals. Photo provided by Elyse Johnson.Elyse Johnson of Van Goat Studios in Dunn wants to spread her artistry and make a lasting mark in her community. Van Goat, which has been operating since 2019, has allowed Johnson to express herself through murals and decorating electrical boxes in the urban landscapes of North Carolina. On top of traditional mural painting, Johnson offers what she calls “portable murals,” an option tailor-made for structure owners who do not want to commit to a design for their wall.“A contractor builds a framed piece of wood, and then they can frame the ‘mural’ onto the wood, whether it’s into their building, whether it’s interior or exterior,” Johnson said. The beginnings of Johnson’s journey into establishing Van Goat Studios reflect the teachings she wants artists to take away today: everything is a learning opportunity. When she started Van Goat, she shared it was a joint venture with a business partner. “I mainly did that because I didn’t feel like I was ready to go and do this on my own,” Johnson said. Her business partner eventually dropped out of the project, deciding she wanted to pursue other forms of art. That is when Johnson was thrust into growing her business on her own during and in the aftermath of the COVID-19 pandemic. “I had built up my confidence enough to go out and reach new heights,” she said. “And I was probably one of the few that benefited from COVID.”The moment presented a silver lining for Johnson. One of her first projects was a Farmers Day mural for the town of Coats. “When COVID-19 hit, Coats was not able to hold their annual festival, so they had a little bit of savings. They decided they wanted to do something for their community without getting anyone sick,” Johnson said.From there, word of mouth spread. Now, Johnson has an organic way of approaching projects. “Like a lot of muralists, if I feel inspired by a building, I will just go up and talk to that building owner and tell them a mural is something they should consider,” Johnson said. But above all, Johnson says she wants art to be accessible to everyone. Johnson said she is trying to stick to projects that benefit “the little guys.” “I’m not trying to go for a project in downtown Raleigh to get the eight-foot-tall building,” Johnson said. “I’m not trying to go to those major cities and get those huge buildings for two reasons: one, I don’t want to go that high; two, my passion really lies with the small guys.” But due to financial constraints and the material reality of art commerce, that requires open communication, she added. “I don’t want to just snowball you with this huge price, and then you just shut me down because it wasn’t what you were thinking,” Johnson said. “At the same time, I am an advocate for the arts, so I’m not going to give you a $10,000 mural when you’re only going to pay $5,000.” There is a healthy balance in explaining the artistic process and working with clients and the surrounding community, Johnson said.“Your municipality invested this, and this is why they invested this, and this is how it’s going to help and improve your community,” she noted. “Same thing when I’m talking to a small business. You asked for me to come at you with this that is outside your budget. How do we make this still your same exact goal, but within your budget lines?” Johnson also provides lessons to aspiring artists. She does so with a mission: how do you master the balance between being a great artist and a competent business owner? “We still do art lessons, but I’m also going to give you business scenarios,” she noted.One of the scenarios she has come up with for her students is a T-shirt competition. “The kids have to think about ‘okay, I can’t just draw whatever I want on a T-shirt. I need to think about what colors Miss Elyse likes. What does Miss Elyse’s logo look like? What would Miss Elyse like?’” Johnson said. “So the design needs to be around that kind of concept.” As Johnson looks toward the future of Van Goat Studios, she is thinking of time, longevity and succession. Johnson is a new mom, which she said has shaped how she sees the future of the studio.“I still want my name and my business out there continuing, so that when my daughter is of age and she can be more independent, then I can be out there doing more and more,” Johnson said. “I would love to get a student to pass this on to, or an intern. I would love for this business to be passed on to the next generation and let them go.”
Report: Conference executives crafting ‘Plan B’ ahead of Protect College Sports Act vote
Monday evening, the U.S. Senate is expected to hold a full vote on the Protect College Sports Act. In the meantime, executives at the conference level are crafting “Plan B,” Yahoo! Sports’ Ross Dellenger reported. The plan would include parts of the bipartisan Senate bill, including a $48.8 million revenue-share cap, which would be a […]
Max Scherzer Gets A Win To Finish The Season
Reds 1 Blue Jays 5 If I were Max Scherzer, that’s how I’d want to end my career. He threw seven innings, allowed six hits, one earned run, one walk, and seven strikeouts (which would finish him with 3,557 strikeouts, three fewer than Justin Verlander). Max threw 114 pitches. That’s just amazing, especially on short […]
Jaguars’ Latest Prediction Would Be Dream Scenario for Trevor Lawrence
Trevor Lawrence and the Jacksonville Jaguars were able to take care of business in Week 3 against the New England Patriots. When the final whistle was blown, they ended up winning by a dominant final score of 35-6. With the win, the Jaguars improved to 2-1 on the young season. They are beginning to look […] The post Jaguars’ Latest Prediction Would Be Dream Scenario for Trevor Lawrence appeared first on Gridiron Heroics.
Letter | Rail merger would be a boon for businesses
Dear Editor: As a small business owner in the building industry, I know how much businesses like ours depend on a reliable supply chain, including the rail network that moves
UK business minister warns potential US diesel export ban ‘significant concern’
The U.K. receives around one-sixth of its diesel from the U.S. and would be one of the countries most exposed to an export ban.
This Texas college built a sports dynasty. Now comes a huge $43M upgrade.
The new complex would bring several championship-caliber programs back to campus.
Massachusetts ballot Question 3 would eliminate political party primaries in state elections
Jon Watts reportedly set to direct the next 'Star Wars' film
Watts would direct the first of Simon Kinberg's planned Skywalker Saga trilogy, though Disney hasn't greenlit it, THR reports.
Why a spacecraft exploring moons where life may thrive is zipping by Earth
Sent to determine what conditions hypothetical life would face deep in the solar system, “Juice” must first make two more passes of everyone’s favorite inhabited world.
Report: Apple working on new Vision Pro, with different form factors on the table
After the release of Vision Pro, everyone wanted to know how long it would be before the company could release...
Rogers Tries to Make El-Sayed’s Health Care Plan Scary
_Taylor, Michigan_HERE’S HOW YOU CAN TELL Mike Rogers is anxious to make up ground in the Michigan Senate race: He held a press conference on health care last weekend. Health care is usually a rough issue for Republicans, because voters associate the GOP with attacking cherished programs like Medicare and Medicaid that Democrats have historically supported. It’s a particularly difficult issue in this campaign, because a few months ago Donald Trump and the Republicans refused to extend temporary financial assistance in the Affordable Care Act. As a result of that decision, more than 20 million Americans faced higher insurance prices this year. That’s not a policy choice you want to be defending at a time when voters frequently cite the cost of health care as a top concern. Throw in the fact that Democratic nominee Abdul El-Sayed can draw on his credibility as a doctor and former public health director in Detroit, and it might seem like Rogers’s best bet would be to avoid health care altogether. But Rogers had his reasons to spotlight health care last Saturday. And they became apparent a few minutes before he spoke, when members of his campaign staff There’s a lot happening. Too much, some days. We can’t promise to have all the answers. But we can promise to keep asking the questions, following the facts, and figuring things out alongside people who care about where this country is headed. Read with us. Learn with us. And when it matters, stand with us. Join the side you’re already on. Join Bulwark+
New Iberia’s Beneath the Balconies brings live performances, dancing to Main Street
Organizers say the event is about more than entertainment, but also an opportunity to bring visitors into New Iberia when they otherwise wouldn’t have.
The proof that Alexander Isak was worth £125 million
Alexander Isak didn’t hit the ground running like many hoped he would following a £125 million move from Newcastle last summer. The Swede failed to settle into Arne Slot’s side and then suffered ...
New York Jets Flight Connections 09/27/26
Happy Sunday, Jets fans! The Jets visit the Detroit Lions today looking to bounce back from a tough overtime loss to the Green Bay Packers. A win puts the Jets at 2-1 and would put the loss to Green Bay into the rear view mirror. This won’t be an easy game, but if the Jets […]
I started fact-checking Trump 10 years ago. Here are 15 things I’ve learned
Ten years ago this month, in my old job as Washington correspondent for the Toronto Star, I started what I believed would be a quick little side project: fact-checking underdog presidential candidate Donald Trump, who was telling a remarkable number of lies but was rarely being corrected. Like a lot of people, I thought Trump would lose the 2016 election.
Ospreys are disappearing along the East Coast. Scientists think they know why.
At the center of a widening crisis for one of the nation's great wildlife comebacks is a fish most Americans would hardly recognize.
Burnham: 'Broken social care will in the end break the NHS'
Andy Burnham said the proposed care service would be laid out in detail and put on the ballot at the next general election.
Terrell Williams making impact with Patriots after beating prostate cancer
Williams, who switched roles after beginning last year as defensive coordinator, would be the favorite for a Comeback Coach of the Year award, if it existed.
Hibs take winger Matondo on trial
Former Rangers winger Rabbi Matondo is on trial with Hibernian while Torino midfielder Gvidas Gineitis admits joining Celtic would be of interest.
'Gaming pays me double what I earned as a teacher'
Jarvs Tasker says it would have taken her 20 years as a teacher to make what she earns now.
Commentary: Arkansas football takes care of business to bushwhack upstart Tulsa
The positives coach Ryan Silverfield said Arkansas would build on following last week's home loss to Georgia are magnified as the Razorbacks out-gained their visitors by 200 yards in the rout.
The Trump administration said it would prioritize ending mother-to-child HIV transmission. Health workers say it cut services
Dr. Theopista Masenge was at the hospital in Mbeya, Tanzania, rolling out new treatments for children with high HIV viral loads when she got the call: Stop work, now.
Fetterman defends political identity, weighs potential role as 51st senator
Pennsylvania Sen. John Fetterman (D) defended his position as a Democrat on Saturday despite straying from the party on key issues — but refused to speculate how he would break ties if his party at…
A win on Sunday would tie Dak Prescott with Roger Staubach for second on Cowboys' all-time list
“Resident Evil” (2026) Review and Film Franchise Retrospective
After years of poorly made adaptations, “Resident Evil” (2026), directed by Zach Cregger, attempts a new approach to a story that fans have witnessed many times. From 2002 to 2017, Sony released six action-horror movies based on the game series. Mostly directed by Paul W. S. Anderson, the films would create new characters and seemed...
Permitting reform is good politics and good for markets. Bring it on.
A truly tech-neutral deal would serve the interests of both parties.
Liverpool looking to recreate excellent Jeremy Jacquet deal
The last two years have seen a distinct change in Liverpool’s transfer policy. During the time of Jurgen Klopp, the Reds became known as a side that would sign players with upside and turn them into...
CT man accused of stealing, forging checks from local business and paying juvenile to deposit them
Investigators allege that the man contacted the juvenile to deposit the checks for him at different bank locations and said he would pay him $5,000.
Shapiro administration's controversial health regulations dropped, for now
(The Center Square) – New regulations that critics said would give the state Department of Health power to enter private homes without a warrant were withdrawn late Friday.
Shapiro administration's controversial health regulations dropped, for now
(The Center Square) – New regulations that critics said would give the state Department of Health power to enter private homes without a warrant were withdrawn late Friday. The news comes just days af...
Saturday Jays Notes
Second-to-last day of the regular season. There isn’t much news. Max Scherzer says he’ll wait until after the season to decide whether he wants to pitch next year, but he’s set to start tomorrow, in front of his kids (just in case). He hasn’t put up numbers that would make me want to re-sign him. […]
‘I can deliver’: Burnham pledges radical change on eve of Labour conference
Exclusive: UK prime minister says delivering fiscal stability would be ‘crucial’ to be able to fix bigger problems
Trump declines to say if Ukraine can manufacture Patriot missiles to fend off Russian attacks
President Donald Trump declined to say if he agreed to allow Ukraine manufacture Patriot missiles a day after Ukraine’s Volodymyr Zelensky reported he would.
Trump Rejects Iran’s Cease-Fire Proposal to Reopen Strait of Hormuz
The president said the deal was not “acceptable” and demurred on whether he would restart military strikes after the midterm elections.
Byron Donalds says he would have debated David Jolly at Sunshine Economy Summit
'He just wants to hide from the voters.'
The Weekend Mauling: 9/26/26
Kansas Jayhawks News Tre White use headed back to Kansas. What does it mean for Self and the Jayhawks? Through the Phog writes that one former Kansas player from recent years would make this year’s team unstoppable if you could add him to the roster (though I don’t think even the current eligibility situation would […]
Why Ryan Nembhard Would Be a Good Fit for Nuggets
Ryan Nembhard and the Nuggets could have some mutual interest if he clears waivers.
Intel Panther Lake Teardown, 18A, BSPD, GAAFET, SemiAnalysis STEEL
Panther Lake debuts the first commercial implementation of backside power delivery (BSPDN), introduces Intel’s first iteration of gate-all-around (GAA) transistors, and showcases their advanced packaging capabilities with its Foveros-S assembly. With Panther Lake, Intel’s manufacturing arc has shifted from nebulous roadmaps to shipped silicon, a significant milestone on their long road back to competitive semiconductor manufacturing. To evaluate the extent of Intel’s comeback, we tore down Panther Lake. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Our teardown traces 18A from its four-sheet RibbonFETs (Intel’s marketing name for GAAFETs) and gate stacks through contacts, frontside and backside wiring, and the bonded carrier. We explain how these material and integration choices improve gate control and reduce resistance, while adding capacitance, thermal resistance, and process complexity. Our measurements put Panther Lake’s 18A compute logic and TSMC N3E GPU logic at similar logic density. However, 18A does not lead TSMC N3P, N2 or Samsung SF2 in peak density. Panther Lake’s CPU cores are incremental updates, and the high-end GPU still uses TSMC N3E. Panther Lake assembles one compute tile, one GPU tile, and one I/O tile atop a passive base tile using Intel’s Foveros-S advanced packaging. Both compute tile variants use Intel 18A. The Xe3 GPU options are a 4-core GT1 tile on Intel 3 and a larger 12-core GT2 tile on TSMC N3E. Both I/O tile variants use TSMC N6. [1], [2] Our analysis centers on the PTL-U compute tile, both the 4-core and 12-core GPU tiles, as well as the 12-lane I/O tile. In conventional chips, power and signal are routed through the same frontside metal stack towards the device frontend. Power rails consume scarce routing resources near the transistors, while tall via stacks carry VDD and VSS from the coarse upper wires to local rails. Backside power delivery (BSPD) moves the main power network behind the transistor layer, to the backside, separating it from frontside signal routing. We covered BSPD and its impacts in 2024. [3], [4], [5] Intel’s BSPD implementation, branded as “PowerVia”, routes power through dedicated backside metals to nano-TSVs, which connect those rails to local source/drain (S/D) contacts. Implementing that separation requires Intel to build the interconnect stacks from both sides of the wafer. The frontside comprises the M0-M14 signal stack, while the backside comprises the BM0-BM5 power stack. M0 and BM0 are closest to the transistors. The nano-TSVs connect the two sides, but Intel patterns and etches each via from the front after forming the contacts. A narrow via runs from the side of the contact deep into the silicon substrate. Intel then completes the frontside signal metal stack, bonds the wafer to a carrier, flips it and removes the original substrate until the buried via tips are exposed. The backside metal stack is then deposited directly on the revealed vias. The nano-TSV and backside-via profiles taper in opposite directions because Intel forms them from opposite sides of the wafer. The transistor structures form the FEOL. Local contacts and nano-TSVs connect them to the wiring. M0 begins the frontside interconnect stack. The silicon carrier remains attached above the frontside interconnects. It supports the device wafer during substrate removal and backside processing and remains part of the finished chip’s thermal path. PowerVia removes the main power distribution from the congested frontside metals, routing supply through shorter and wider backside wires. Its lateral landing still occupies area in the standard cell, so it recovers less cell area than a direct backside contact. [3] Nano-TSVs beside the logic devices carry VDD or VSS from the backside power network, while signal connections continue upward through the frontside metals. Backside Interconnects Samsung SF2 data is included for comparison to Panther Lake’s within this article. SF2 is the incumbent GAA foundry node but lacks BSPD, serving as a useful reference to evaluate 18A. A full teardown of Samsung’s S26 products, processed on SF2, will be shared soon.Nanosheet-cut EDS comparison. The PowerVia supply path runs from the backside Cu rails through Mo-lined W nano-TSVs to the local transistor contacts. In this cross section, the tapered connection spans roughly 150 nm from the contact level to BM0. The Ta liner confines Cu and promotes adhesion to the surrounding stack; the AlOₓ etch stop controls the next dielectric etch above the rail. Dielectric beneath the ribbons electrically separates the devices from the backside wiring and removes the conducting silicon body below the channel. [6] AlOₓ serves as an etchstop (ES), enabling endpointing and protecting the underlying layers. Low-volatility aluminum fluoride reaction products resist the fluorinated plasma, allowing a thin AlOₓ film to protect the metal while the surrounding low-k dielectric is removed. [6], [7]. While the BM0 and layers above the M1 lines show double AlOx layers, Our SMIC N+3 teardown showed single AlOₓ layers. SMIC uses a simpler local AlOₓ substack, while the remaining cap and etch sequence provide the required landing protection. So why double layers? The closely spaced AlOₓ doublets provide two protected endpoints in the etch sequence. Intel documents an AlOₓ/SiN/AlOₓ stack that explains the benefit. The main dielectric plasma etch stops on the first AlOₓ film; a selective wet clear opens that film; a second plasma etch removes the intermediate SiN and stops on the second AlOₓ film. The final wet clear exposes the metal landing surface. SiN is the intermediate dielectric in Intel’s published example. [8] The second stop protects the metal through a cap breakthrough. Wide openings can etch faster than narrow ones, and etch depth varies across the wafer. Metal under an early-clearing opening would otherwise be exposed while other openings still need more etching. Staged protection widens the process window and reduces metal erosion, corrosion and void formation. [8] TSMC documents AlN/AlOₓ/SiOC/AlOₓ above Cu, with AlN blocking Cu diffusion, and a simpler AlN/SiOC/AlOₓ variant that omits one AlOx film. [9] Levels with different opening sizes, aspect ratios, pattern densities and cap materials need different etch margins. A double AlOx stop is useful where another protected endpoint justifies the added processing. The extra film adds formation, selective opening and cleaning steps, plus another set of interfaces to control adhesion, moisture, and stress. These blanket films are opened through the existing via pattern, so each film does not require another lithography mask. AlOₓ adds parasitic capacitance when it replaces lower-k dielectric; two thin AlOₓ films can nevertheless contain less AlOₓ than one thick film. Total thickness, placement, and theintermediate dielectric determine the electrical cost. Deposition chemistry also changes AlOx permittivity and residual hydroxyl content, which can oxidize the underlying metal. [7], [8], [10], [11] The backside stack separates into relatively fine BM0-BM2 wiring near the devices and coarser BM3-BM5 power distribution. The largest pitch increase occurs between BM2 and BM3. BM0’s pitch closely matches the logic-row height, fitting local power delivery to the cell rows. Higher levels aggregate current through larger conductors: routing density becomes less important than low resistance and current capacity as the network approaches the package. This hierarchy provides wide power wiring for the power delivery network without consuming scarce frontside signal-routing resources. [3] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Frontside Interconnects Intel 18A combines Mo-lined W contacts and nano-TSVs with a separate backside Cu power network. Samsung SF2 keeps power on the frontside, using Ti-based contact interfaces and Ta-based barriers and Co liners around Cu wiring. In 18A standard-cell rows, backside power rails supply the devices through nano-TSVs within the cells, freeing frontside routing resources. Samsung’s M0 accommodates both power and signal connections. From the device toward M0, the connection runs through a Ti-based S/D interface, W contact fill, a Mo-lined W via, and the Cu M0 wire. Mo supplies a conductive nucleation and adhesion layer for W, replacing the resistive TiN liner used in conventional W integration. This increases the effective conduction volume within the feature while retaining W fill and its established polishing, cleaning and etching processes. Intel’s Mo/W patent describes this integration tradeoff. The nano-TSV uses the same Mo-lined W construction in the backside supply path. [12] The move from TiN to Mo is an incremental change. While a full Co or Mo fill can also reduce the volume lost to liners in very small features, it requires new integration schemes that increase complexity and risk. Cu remains attractive for wider wires due to its low resistance. As wires and vias shrink, the diffusion barrier consumes an increasing fraction of their cross-section. [12], [12], [14] Intel uses Co/Ru liners at M0-M1, Co at M2-M4, and Nb at M5-M9. The lower-level liners help Cu adhere and reduce void formation during trench fills. Applied Materials’ Endura has new thermal control that facilitate wetting process, so the thin film continuity is good enough that good capillary pressure will drive Cu atoms to the via bottom without voiding. Intel’s choice to use Nb is particularly interesting. Intel’s Nb patent describes a conductive diffusion barrier intended to reduce the barrier’s contribution to resistance relative to conventional Ta-based barriers, particularly at via bottoms where all current crosses the barrier. The patent pairs Nb in coarser levels with the option of lower-cost PVD processing. [15], [16] The upper metal layers support thicker barriers formed through physical vapor deposition (PVD) despite its worse coverage and uniformity. Meanwhile, the lower metal layers require thinner barriers deposited through conformal atomic layer deposition (ALD). Co/Ru adds another material interface and requires controlled deposition and Cu fill. Changing liners and barriers by metal layer allows Intel to optimize interconnect resistance, process complexity, and reliability. [15, 16] RibbonFET, Intel’s name for its gate-all-around FETs (GAAFETs), replaces the FinFET’s vertical fins with four stacked horizontal silicon nanosheets, allowing the gate to surround the channel on every side. The path to GAAFET begins with the planar transistor. A planar MOSFET places the gate above the channel between its source and drain. Pairing an NMOS with a PMOS transistor creates a CMOS inverter, in which the NMOS pulls the output low for a high input, and the PMOS pulls it high for a low input. The gate must retain electrostatic control of the channel to ensure clean switching. As gate lengths shrank, the drain began to compete with the gate for that control, increasing off-state leakage. Electrostatic control was restored through an architectural evolution that raised the channel into a vertical fin and wrapping the gate around three sides. Called “FinFET”, this new architecture packed more effective channel width into a smaller footprint. Further scaling made it harder to maintain both drive current and leakage within smaller cells, and reintroduced the same problems planar MOSFETs faced. Nanosheet GAAFETs close the fourth side by replacing the vertical fin with a stack of horizontal nanosheets, each surrounded by the gate. The tighter electrostatic control suppresses leakage at shorter gate lengths while stacking adds effective channel width within the cell footprint. In a FinFET process, channel width changes in discrete steps as designers must add or remove whole fins. Nanosheet width can instead be adjusted continuously within the process’s design rules. Wider sheets increase drive current, while narrower sheets reduce capacitance at the cost of drive current. Intel 18A uses stacks of four nanosheets each and varies their widths across logic and SRAM. At the process level, adding more sheets to each stack increases effective channel width and drive current, but complicates fabrication. RibbonFET vs MBCFET Samsung began GAAFET production in 2022 with SF3E, following with SF3 and now SF2. Its ‘MBCFET’ provides a useful structural comparison with Intel’s first RibbonFET implementation. [17] STEEL is digging deeper into SF2, used in the Exynos 2600, and TSMC’s GAAFET N2, used in Apple’s A20 Pro, in upcoming newsletter articles. We’re throwing some teasers on X. Let’s compare Samsung SF2’s MBCFET with Intel 18A’s RibbonFET. Subscribe Even to the untrained eye, Intel’s extra nanosheet is obvious. Intel stacks four ribbons to Samsung’s three. Samsung’s sheets are much wider in these fields, so both sheet count and width matter to the available channel perimeter. Sheet width also changes which silicon surfaces carry current. On conventional (001) silicon, wide nanosheets emphasize the broad top and bottom surfaces, favoring electron transport; the larger sidewall contribution in a narrow sheet favors hole transport. Thinner sheets improve gate control but increase confinement and scattering. This makes width and thickness part of the NMOS/PMOS balance, alongside strain and threshold voltage. [18], [19] GAAFET designs like 18A use different work-function-metal (WFM) stacks for NMOS and PMOS. Around each ribbon, a thin SiOx interfacial layer separates the silicon channel from the HfOx high-k dielectric, with La providing dipole tuning and the WFM wrapping the dielectric. NMOS uses a TiAl-based stack, while PMOS uses TiN WFM. W fills the remaining gate trench, providing a lower-resistivity path where the work-function layers are no longer needed. In this field, the PMOS stacks leave room for W between ribbons, while the NMOS stacks occupy more of those gaps. A silicon-based dielectric marks the P/N boundary, allowing the PMOS and NMOS gates, sharing the same gate trench, to be processed sequentially. Fast logic paths, retention circuits, and SRAM need a family of threshold options. Changing threshold without substantially changing device dimensions, capacitance or fabrication complexity is valuable. FinFET processes typically use different work-function-metal stacks. In a four-ribbon GAA stack, the narrow sheet-to-sheet gap limits how much WFM can fit around each channel. La in the gate dielectric creates interfacial dipoles at the SiOx/HfOx boundary, shifting effective work function and tuning threshold voltage. This gives Intel another control alongside its NMOS and PMOS WFM stacks. Low-threshold devices improve critical-path drive; higher thresholds reduce leakage elsewhere. Dipole tuning is especially useful in GAA because it changes threshold without consuming the narrow intersheet gap with thicker WFM. Precise control of La incorporation, diffusion and interface quality has long been a challenge, limiting viability in high volume production but is now seen from every leading-edge foundry. Intel’s patent describes depositing a dipole-forming oxide above HfOx and annealing it toward the interfacial oxide before completing the work-function and fill metals. This separates threshold tuning from the space available for metal. Newer research addresses the thermal cost: imec’s 2026 dipole-middle research inserts the shifter between two HfOx depositions, shortening the diffusion path while protecting SiOx during patterning. [20], [21]Matched-cut EDS, Intel 18A (left) vs. Samsung SF2 (right). Intel retains raised source/drain epi beneath its contacts, while Samsung recesses W deep into the epi to form a V-shaped Ti-lined interface. The deeper contact increases metal-to-semiconductor area and shortens the current path from the lower sheets, reducing contact and spreading resistance. It also removes epi volume and brings the contact etch closer to the channel ends. Retaining more epi preserves the material available for strain transfer, especially from SiGe into PMOS. These geometries balance contact access against stress engineering and etch margin. [22], [23] Samsung stacks three sheets to Intel’s four ribbons, and both processes use sheet width to tune drive strength. In our Samsung cross-sections, widths range roughly from 19 to 30 nm in the NPU rows and 37 to 50 nm in the CU cell. The Samsung nanosheets taper, with the widest sheet at the bottom and the narrowest at the top. Both processes use HfOx gate dielectric and Ti-based work-function stacks, with Al in the NMOS stack. In the Samsung devices shown here, the dielectric and WFM occupy the intersheet gaps, leaving W above the top sheet. Intel’s PMOS stack leaves more room between ribbons, and W fills those gaps while the thicker NMOS stack leaves W mainly in the upper trench. Gate-stack EDS maps. The W between Intel’s PMOS ribbons provides a conductive path close to the lower gates. Where WFM fills the entire gap, the gate still surrounds the channel, but voltage reaches it through the more resistive work-function films. Thinner WFM and dipole tuning preserve room for low-resistivity fill; Mo and Ru are alternative fill metals being developed for further scaling. [24] A masked, sequential WFM flow explains the different gate heights and inter-nanosheet fill. The proposed sequence below shows how separate NMOS and PMOS work-function steps produce that geometry. Enabled by the BSPDN process, Intel replaces the dense-logic silicon subfin with dielectric, removing the parasitic conduction path below the ribbons and reducing substrate-related capacitance. A retained silicon body as in classical, non-SOI, planar and FinFET designs needs junction and punchthrough-stop engineering to suppress leakage. Dielectric isolation makes that leakage less sensitive to the subfin doping profile but adds removal and fill steps. It also weakens the direct thermal path through silicon, making the contacts, metal stacks and package more important for heat extraction. [24], [26] Fluorine is concentrated around selected Intel device structures in the maps. WF6 is a standard precursor for W nucleation and fill, while barrier films protect adjacent dielectrics from fluorine attack. Low-fluorine W processes reduce the residual-F burden. Chloride-based precursors avoid introducing F during W deposition, but require control of chlorine attack, nucleation and fill quality. The integration target is a continuous, low-resistance W path with a thin protective liner and minimal chemical damage to the surrounding stack. [20], [27], [28] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. We measured cell height, gate pitch, metal geometry, and ribbon dimensions at the XTEM sites shown below. The tables group these dimensions by site and device polarity. Our “sheet cuts” cross the silicon channel and show the ribbons end-on. “gate cuts” run along the channel through successive gates. The 18A logic cell dimensions point to a five-track logic library while the N3E and Intel 3 cell dimensions evidence a seven-track logic library. The DDR-PHY uses wider M0 wires and much larger spacing than core logic. That trades routing density for lower wire resistance and weaker coupling between neighboring nets. The geometry suits the current delivery and coupling requirements of analog, clock, and I/O circuitry. PowerVia lets 18A combine a compact cell height with wider M0 geometry by moving the main power rails off the signal-routing tracks. That relaxes local wire scaling while preserving a small cell footprint. Cell height and gate pitch set the geometric density; pin access and routability determine how much of it a real block can use. [29] The biggest takeaway from our gate-pitch measurements is that Intel 18A compute logic and TSMC N3E GPU logic have similar density in the Bohr representative-cell model. The 18A example is 18.6% denser than the Intel 3 GPU example. Gate pitches are nearly identical across the three sites, so cell height drives most of the difference. The Bohr model combines a four-transistor NAND2 spanning three gate pitches and a 32-transistor scan flip-flop (SFF) spanning nineteen pitches, weighting their densities 60:40. The sensitivity column shows how independently changing cell height and gate pitch by ±1 nm changes the result. This compares representative cell geometries; whole-die density also depends on cell mix and placement. The 18A P-core gives M0 substantially more metal cross section than the N3E vector engine. Treating each profile as a trapezoid gives 2.63 times the area per line and 1.84 times the area after normalization by routing pitch. The larger section reduces the geometric contribution to line resistance and lowers current density for a given current. Taller and wider wires also add capacitance, so circuit delay depends on the balance of resistance and capacitance. The DDR-PHY has less metal area per routing width than the 18A core fields, while remaining above N3E. [30] Area = height × (top CD + bottom CD) / 2, including liners. Area/pitch normalizes by routing width. Taper is the symmetric sidewall angle from vertical, with the largest angle belonging to the DDR-PHY. Compute tile The measurements show how ribbon dimensions and gate-stack geometry vary across the compute tile and between NMOS and PMOS to balance channel drive, gate load and the space needed for the dielectric/WFM stack across logic, SRAM and the DDR-PHY. Width mainly changes available channel perimeter; thickness also changes electrostatic control and carrier confinement. Gate-stack thickness then determines the space left for low-resistivity fill P-core and LP E-core logic Both the P-core and LP E-core use multiple nanosheet widths. Widths are measured on high-magnification XTEMs while wider-field images demonstrate additional width choices within the LP E-core. Multiple widths are expected even within an LP E-core. Timing-critical paths, buffers and cells with different fanout need different drive strengths. The lower-magnification fields show this width diversity beyond the sites quantified in the table. L2 and L3 SRAM GAA gives SRAM designers another way to balance the pull-up (PU), pass-gate (PG), and pull-down (PD) transistors. FinFET bitcells set device strength through fin count while GAA adds nanosheet width as a sizing knob. In a 6T SRAM cell, a strong pull-down relative to the pass-gate limits read disturbance, while a strong pass-gate relative to the pull-up improves writability. During a write, the pass-gate and write driver pull the node storing “1” below the inverter trip point. During a read, the pull-down holds the node storing “0” low. Bias, threshold voltage, mismatch and assist circuitry set the remaining margin. FinFET high-current cells commonly use a PU:PG:PD fin-count pattern of 1:2:2, a device-sizing ratio rather than a current ratio. Ribbon width lets Intel balance SRAM strengths without adding whole fins. The L2 cell uses its narrowest ribbons for PU and widest for PD, improving writability and read stability respectively. Intel’s disclosed HCC operates without assist; its denser HDC uses negative-bitline write assist. Pulling the selected bitline briefly below ground increases pass-gate overdrive so it can overpower the pull-up at lower supply voltage. That buys density and low voltage writability at the cost of boosting circuitry, switching energy, and additional voltage stress that must be controlled. [31], [32] Four rectangular ribbons give the perimeter = 8 × (width + thickness), before corner rounding. PG/PU is 1.49 and PD/PG is 1.16. The L3 structures closely resemble L2 in layout and cell height. Fewer L3 nanosheet widths are tabulated because fewer high-magnification images were available. DDR PHY The DDR-PHY trades density for controlled analog behavior and reliable off-chip signaling. It contains drivers, receivers, delay circuits, and calibration logic that set drive strength, sampling time, and voltage margin. Repeated four-sheet devices with similar widths fit the use of regular transistor units for matching and programmable drive. Its wider local wiring provides room for current delivery and separation of sensitive signals, while consuming more area than a dense core-logic grid. The layout serves the memory channel’s electrical requirements as well as digital logic density. [33] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Intel 3 GPU devices Vector engine logic Intel 3’s XVE logic uses two-fin PMOS and NMOS devices with power rails in M0. Its cell height and M0 pitch give a seven-track geometry, two tracks more than the 18A logic. One-fin groups also appear among the two-fin devices. Intel 3 L2 SRAM The Intel 3 L2 SRAM uses the familiar HCC sizing pattern: one PU fin, two PG fins, and two PD fins. N3E GPU devices Vector engine logic The N3E XVE field contains repeated two-fin devices with seven-track cell geometry. N3E remains a FinFET process, giving Panther Lake a direct FinFET-to-RibbonFET comparison. N3E L2 SRAM The N3E L2 SRAM uses the same PU:PG:PD fin-count pattern of 1:2:2. Panther Lake-U follows Lunar Lake’s floorplan quite closely. Both pair 4 P-cores with 4 LP E-cores and NPU, media and display engines in similar locations. Lunar Lake also uses Xe2, the direct predecessor to Panther Lake’s Xe3 GPU. This makes Lunar Lake the most direct basis for our comparisons. Arrow Lake differs in core count and uses the older Xe-LPG GPU architecture, so we only use it where it offers a more direct component-level comparison. Compute tile Panther Lake compute-tile floorplans remain sparse even months after launch. Intel 18A’s backside metal and dielectric stack must be removed without damaging the underlying structures before a clean transistor-level floorplan can be imaged. Most published die shots hide or heavily process the background, but we are quite proud of the die shot we achieved and are excited to show the work we have done. We measured the areas of the key components on the compute tile and compared them with their Lunar Lake predecessors on TSMC N3B. These help us to capture changes in block area and compare the two chips across process nodes and designs. Our total tile areas exclude the scribe-line area. The compute-plus-GPU subtotal below uses the PTL-U compute tile and GT1 GPU; it excludes the I/O tile and passive base. Individual block areas use the boundaries marked on the floorplans The compute-plus-GPU row is recomputed from the displayed PTL-U and GT1 areas. Component rows use their stated per-region counts and are not an additive partition of the whole tile. The P-core area remains almost unchanged between Lunar Lake and Panther Lake, despite L2 capacity increasing from 2.5 MiB to 3 MiB. Arrow Lake uses the same Lion Cove core as Lunar Lake but also has a 3 MiB L2. Cougar Cove fits 20% more L2 into the same P-core area. The larger private cache keeps more of each core’s working set close to its execution units, reducing access to shared L3 and DRAM. Extra capacity adds storage leakage and lookup energy, so designers balance it against avoided lower-level accesses. The shared P-core L3 cache also shrank by 14.8%. [2] Cougar Cove combines a similar footprint with Intel’s reported power-efficiency improvements. RibbonFET’s tighter channel control reduces leakage, while PowerVia reduces supply droop and allows tighter voltage guardbands. [1] Darkmont’s four-core LP E-core cluster is 5.0% smaller than Skymont’s on Lunar Lake, with most of the reduction in its L2 regions. The 1 MiB region shrank by 8.4% and the 1.5 MiB region by 14.9%. The tag arrays also use one fewer visible row. Tags identify which memory addresses the data array holds, so rearranging them changes the cache’s layout and wiring without requiring less data capacity. [2] The LP E-cores share one L2. This pools capacity and avoids duplicating all the cache machinery, but the four cores contend for its banks and bandwidth. Their separate cluster also keeps light work away from the performance cluster and its L3, allowing that larger domain to sleep. [1], [2] Cache area includes more than the storage cells. Tags identify each line, decoders select rows, sense amplifiers read the small bitline signal, and wires connect to the banks. Splitting an array into smaller sections shortens wordlines and bitlines, improving access speed, but duplicates peripheral circuits. Panther Lake’s smaller cache regions therefore reflect the complete memory implementation, including how much of each region is devoted to storage. [34] Unlike Meteor Lake and Arrow Lake, Panther Lake has no separate SoC tile. The NPU, LP E-cores, memory controllers, PHYs, media and display engines now share the compute tile. This removes an active die and keeps CPU memory traffic on one die. The cost is moving PHY and I/O-related circuitry onto 18A: drivers, receivers and analog circuits must still meet external voltage, loading and signal-integrity requirements, so their area does not shrink like dense digital logic. [1], [2] The biggest shrink comes from the NPU, which occupies 36.9% less area. NPU 5 consolidates the same total INT8 MAC count into half as many neural compute engines. Each of the three NCEs has a larger MAC array to make the complete NCE envelope 22.6% larger than an NPU 4 engine. Consolidation also halves the number of scratchpads and SHAVE DSPs, from 12 to 6. The MAC array handles matrix multiplication and convolution, while SHAVE executes vector and custom operations that fit the array poorly. [1], [2], [35] The paired floorplans identify each NCE envelope and its scratchpad, MAC, and SHAVE regions. Each measured MAC polygon is counted once per NCE in the area accounting below. The scratchpads store weights, activations, and intermediate results near the MAC arrays, allowing repeated use without fetching them again from DRAM. Halving their number delivers the largest measured area saving but leaves less local storage for the same total MAC count. Layers that no longer fit locally require smaller working tiles or more transfers of intermediate data. The benefit depends on keeping the enlarged arrays busy while managing that tighter storage budget. [36] NPU 5 also adds native FP8. Using half the operand width of FP16 reduces storage and transfer demand, helping workloads fit the smaller local memory budget. Lower precision and format-dependent range make scaling and model validation part of deployment. Hardware activation functions further reduce work that would otherwise occupy the programmable DSPs. [1], [2] Microsoft requires an NPU to deliver at least 40 TOPS for Copilot+ PCs. Both Lunar Lake and Panther Lake meet this threshold, but Panther Lake uses significantly less silicon. GPU tiles Panther Lake is Intel’s first product with Xe3, its latest GPU architecture. It offers two different GPU tiles: a smaller GT1 tile with 4 Xe3 cores on Intel 3 and a larger GT2 tile with 12 Xe3 cores on TSMC N3E. Panther Lake allows us to compare the same GPU architecture across both Intel 3 and TSMC N3E. Wildcat Lake adds a third Xe3 implementation on Intel 18A. A future newsletter will detail Xe3 and its implementation differences across all three process nodes. GT2 scales Xe3 to a different physical layout, with render slices arranged vertically instead of GT1’s horizontal arrangement. Slice placement sets the distances to shared cache banks and the D2D interface. Those wires consume area and add delay, so scaling the number of Xe cores also requires a new balance of cache placement, routing and timing. [1] What’s immediately obvious is that the GT2 tile on TSMC N3E has much smaller Xe cores than GT1. These block areas include logic, caches, and routing. An Xe core on the GT1 tile is ~69% larger than one on Lunar Lake, and ~55% larger than one on GT2. Intel 3 therefore uses substantially more area per Xe core. The block-area gap exceeds the measured logic and SRAM density gaps, bringing routing, timing targets, cell mix, and floorplan allocation into the comparison. The measured vector/matrix engine region is almost unchanged between Lunar Lake and Panther Lake’s GT2 tile. Xe3 retains eight 512-bit vector engines and eight 2048-bit XMX engines per core. Its gains also come from feeding those engines more effectively: more resident threads hide stalls, and variable register allocation lets shaders trade registers per thread against the number of threads kept active. [1] The shared L1/SLM capacity increased by 33% from 192 KiB to 256 KiB, while its area increased only 5%, raising effective density by 27%. L1 retains reused cache lines, while software-managed SLM lets a thread group share data locally. Both reduce traffic to more distant memory. Allocating more SLM per group can also limit how many groups reside on a core at once. [1], [37] The GT1 tile carries 4 MiB of L2 against 16 MiB on the GT2 tile. GT1 divides its L2 cache into four 1 MiB banks, while GT2 uses eight 2 MiB banks. Each bank contains 128 macros, but each N3E macro stores 16 KiB, twice the Intel 3 macro’s 8 KiB capacity. The N3E macro is only 54% larger while holding twice as many bits, giving it 30% higher density: ~23.7 Mbit/mm² versus 18.3 Mbit/mm². Including bank-level circuitry, the gap widens to ~16.9 Mbit/mm² on GT2 versus ~10.4 Mbit/mm² on GT1. GT2 gains density with its macros storing more bits per unit area, and those macros occupy more of each cache bank. Larger macros spread decoder and sense-amplifier overhead across more storage, while a more compact bank layout reduces the share spent on control and routing. The compromise is longer wordlines and bitlines that carry more capacitance. [34] I/O tile Panther Lake uses two I/O tile variants, both fabricated on TSMC N6. The smaller one provides 4 PCIe 5.0 and 8 PCIe 4.0 lanes and serves lower-tier systems as well as those without a discrete GPU, while the larger one adds 8 PCIe 5.0 lanes, bringing the total to 20 lanes, for discrete-GPU connectivity. Panther Lake SKUs with the larger 10- or 12-Xe GPUs use the smaller I/O tile. [38] The smaller I/O tile adds a PCIe 4.0 block and a Thunderbolt block to Lunar Lake’s I/O layout, providing four additional PCIe 4.0 lanes and another Thunderbolt 4 port. Its repeated N6 blocks retain nearly identical areas and layouts. Reusing these proven PHYs and controllers avoids porting and requalifying external interfaces on 18A, where faster digital logic offers less benefit to circuits constrained by the off-chip link. [38] SemiAnalysis’s teardown lab (STEEL) dives deep into the world’s advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. We’re hiring technical experts from system to transistor and everywhere in between. Check out our Careers page. Panther Lake offers scalability and modularity through its disaggregated packaging that partition compute, GPU, and I/O silicon into separate tiles allowing for a suite of tile configurations. This partitioning makes the package part of Intel’s node economics as it determines how much leading-edge wafer area each product consumes, which functions can remain on other processes, and how much configuration freedom Intel can offer from a shared set of tiles. Furthermore, fabricating the compute and GPU tiles separately confines the new 18A process to the compute tile and allows graphics and I/O to use other, more established, and more cost-effective processes. For Panther Lake, the GPU and I/O tiles are assembled alongside the compute tile on a passive silicon base using Foveros-S. Intel’s current technology brief lists a nominal 36 µm pitch for Foveros-S. Through-silicon vias (TSVs) in the base connect the fine wiring above to the larger package connections below. The functional tiles sit side by side on that passive base in a 2.5D configuration. [39] Our cross-section through the compute and GPU tiles shows the package’s wiring hierarchy. Microbumps connect each active tile to the passive silicon base; its fine redistribution layer (RDL) carries the short, dense tile-to-tile links. TSVs carry connections through the base to the package substrate, which fans them out to the much coarser motherboard solder joints. The base supplies interconnect, while computation remains in the active tiles above it. [39] At the compute-tile edge, the higher-magnification inset shows a local microbump spacing of approximately 25.24 µm and a feature width of 12.33 µm. These local spacings are finer than Intel’s nominal Foveros-S value. The X-ray fields further confirm tighter neighboring bumps, consistent across every die-to-die area found on each tile. Additional X-ray analysis is offered after the paywall. Putting the memory controller beside the CPU removes the D2D transfer that CPU memory requests required in Meteor Lake and Arrow Lake. This avoids the extra transmitter, receiver, and link traversal, saving interface energy and latency. Panther Lake’s separate GPU still crosses a D2D link to reach DRAM, so its larger local caches also help contain package traffic. [1], [40] Smaller dies are less likely to contain a random fatal defect, and screening them before assembly prevents one bad tile from consuming a complete package of good silicon. Reuse also spreads design and qualification work across more products. Against those gains, Intel pays for the passive base, D2D circuits, extra bonding and test steps, and losses during assembly. Cost per working product across the portfolio captures the combined effect of wafer yield, reuse, test, and assembly. [29] Wildcat Lake packaging Intel launched Core Series 3, formerly Wildcat Lake, on 16 April 2026 for value mobile and edge systems. Wildcat Lake keeps 18A but removes the passive base and combines more functions on one die to simplify the package. The two products therefore reveal two distinct ways to commercialize the same leading-edge process. [41] Wildcat Lake’s 18A die combines up to two Cougar Cove P-cores, four Darkmont LP E-cores, two Xe3 cores and a smaller NPU. A separate platform-controller die supplies I/O, connected through UCIe, Intel’s first processor implementation of the standard. Consolidating graphics remove a tile boundary and the passive base, reducing assembly complexity for a modest-bandwidth value product. It also ties CPU and graphics scaling to the same die, giving up Panther Lake’s ability to swap in a much larger GPU. [42], [43] In July 2021, Intel CEO Pat Gelsinger set out an ambitious process roadmap aimed at regaining performance leadership by 2025, later described as five nodes in four years. Five years and one CEO later, Intel’s comeback story is not as unambiguously positive as Pat may have hoped. [44], [45] Intel once set the pace for process technology, bringing high-k metal gate technology and FinFETs into volume production years ahead of the rest of the industry. Its 22 nm FinFET process reached consumers with Ivy Bridge in 2012. [46] Intel’s integrated device manufacturing (IDM) model allowed its architects and process engineers to co-optimize products and processes. Starting with Sandy Bridge, Intel dominated x86, while AMD struggled with Bulldozer. That lead faltered at 14 nm and broke at 10 nm. Intel targeted a massive 2.7× density increase, but the node arrived years late and required several revisions before it could support Intel’s full lineup. This delay forced Intel to stretch 14 nm across six generations, while TSMC moved ahead in process technology and AMD recovered in x86. By 2019, Intel was still shipping 14 nm across most of its product stack, with its 10 nm client ramp focused on Ice Lake mobile processors. Meanwhile, TSMC was shipping N7 and N7+, and AMD’s Zen 2 compute chiplets used N7 to raise core counts and improve efficiency. Intel’s process failures were central to its decline, but unsound business decisions furthered their downward slide. Product delays compounded product mistakes, pushing client, server, and FPGA roadmaps off schedule. Several attempts to enter AI (Nervana and Gaudi) and networking (Tofino) also failed to establish lasting businesses. Intel’s recovery has focused on consumer CPUs and advanced packaging. Tiger Lake, Alder Lake, Lunar Lake and now Panther Lake have restored Intel’s consumer roadmap. On the process side, Intel 4 shipped with Meteor Lake, Intel 3 with Granite Rapids and Sierra Forest, and Intel 18A with Panther Lake. Intel has also made advanced packaging part of its foundry offering. However, Intel is still playing catch-up in servers. Several Xeon generations arrived years late and trailed contemporary AMD and Arm server CPUs in performance, efficiency, and core count. The process roadmap is back, but Intel does not hold the same process-technology leadership position it held prior to 10 nm. The introduction of gate-all-around nanosheets and backside power delivery are two of the biggest changes to transistor integration in a decade. Intel took on both changes at once: 18A paired its first RibbonFET with PowerVia in Panther Lake. Panther Lake is a substantial manufacturing milestone. Our cross-sections show how RibbonFET and PowerVia reshape local contacts and wiring, while the floorplans show where architectural consolidation and process choices save area. A sustained competitive lead depends on product performance, cost, yield, and the next implementation. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page.. [1] Intel, “Intel Tech Tour 2025 Panther Lake recap,” Doc. 866361, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/866361/ITT_2025_Panther_Lake_Recap1.pdf [2] Intel, “Core Ultra processors Series 3 datasheet, volume 1,” Doc. 872188-001, Jan. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/872188/872188-001.pdf [3] N. Horiguchi and E. Beyne, “Backside power delivery: How to power chips from the backside,” imec Reading Room, Nov. 25, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/how-power-chips-backside [4] W. Hafez et al., “Intel PowerVia technology: Backside power delivery for high density and high-performance computing,” in Proc. IEEE Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2023, pp. 1–2, doi: 10.23919/vlsitechnologyandcir57934.2023.10185208. [5] K. Fischer et al., “Intel 18A platform technology featuring RibbonFET (GAA) and PowerVia for advanced high-performance computing,” in Proc. Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2025, pp. 1–3, doi: 10.23919/vlsitechnologyandcir65189.2025.11075006. [6] K.-F. Cheng, C.-L. Teng, H.-Y. Huang, and H.-C. Chen, “Metal oxide composite as etch stop layer,” U.S. Patent 12 176 247 B2, Dec. 24, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12176247B2/en [7] S. W. King, “Dielectric barrier, etch stop, and metal capping materials for state of the art and beyond metal interconnects,” ECS J. Solid State Sci. Technol., vol. 4, no. 1, pp. N3029–N3047, 2015, doi: 10.1149/2.0051501jss. [8] A. V. Mule’, D. J. Towner, D. Seghete, C. R. Ryder, and A. A. Gonzalez, “Multi-layer etch stop layers for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20220102343 A1, Mar. 31, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20220102343A1/en [9] C.-C. Wang and J. H. Wang, “Interconnect structure with dielectric cap layer and etch stop layer stack,” U.S. Patent Appl. 20230253247 A1, Aug. 10, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20230253247A1/en [10] Y. J. Wu, K.-F. Cheng, C.-C. Lee, H.-K. Chang, and H.-Y. Huang, “Etch stop layer for interconnect structures,” U.S. Patent Appl. 20240332070 A1, Oct. 3, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240332070A1/en [11] M. G. Rainville, N. Shankar, K. S. Reddy, and D. M. Hausmann, “Deposition of aluminum oxide etch stop layers,” U.S. Patent Appl. 20180197770 A1, Jul. 12, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20180197770 [12] J. S. Leib et al., “Conductive lines having molybdenum liner and tungsten fill for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20240429126 A1, Dec. 26, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20240429126 [13] M. Naik, “Cobalt enables power and performance scaling at single-digit logic nodes,” Applied Materials, Dec. 17, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://www.appliedmaterials.com/us/en/blog/blog-posts/cobalt-enables-power-and-performance-scaling-at-single-digit-logic-nodes.html [14] Lam Research, “Breaking through AI’s invisible barrier with molybdenum,” Lam Research Newsroom, May 6, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://newsroom.lamresearch.com/molybdenum-metallization-ai-revolution [15] P. Yashar, G. Malyavanatham, and H. Vijwani, “Integrated circuit interconnect structures with niobium barrier materials,” U.S. Patent Appl. 20240112951 A1, Apr. 4, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240112951A1/en [16] Applied Materials, “Applied Materials unveils chip wiring innovations for more energy-efficient computing,” Applied Materials Investor Relations, Jul. 8, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://ir.appliedmaterials.com/news-releases/news-release-details/applied-materials-unveils-chip-wiring-innovations-more-energy [17] Samsung, “Samsung showcases AI-era vision and latest foundry technologies at SFF 2024,” Samsung Semiconductor, Jun. 13, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://semiconductor.samsung.com/news-events/news/samsung-showcases-ai-era-vision-and-latest-foundry-technologies-at-sff-2024/ [18] C. W. Yeung et al., “Channel geometry impact and narrow sheet effect of stacked nanosheet,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2018, pp. 28.6.1–28.6.4, doi: 10.1109/iedm.2018.8614608. [19] S. Mochizuki et al., “Evaluation of (110) versus (001) channel orientation for improved nFET/pFET device performance trade-off in gate-all-around nanosheet technology,” in Proc. Int. Electron Devices Meeting (IEDM), Dec. 2023, pp. 1–4, doi: 10.1109/iedm45741.2023.10413854. [20] D. G. Ouellette et al., “Fabrication of gate-all-around integrated circuit structures having molybdenum nitride metal gates and gate dielectrics with a dipole layer,” U.S. Patent 12 051 698 B2, Jul. 30, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12051698B2/en [21] imec, “Advancing the CFET-based device roadmap with novel integration modules and standard-cell architectures,” imec, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/advancing-cfet-based-device-roadmap-novel-integration-modules-and-standard-cell [22] A. Reznicek, X. Miao, C. Lee, and J. Zhang, “Wrap around contact for nanosheet source drain epitaxy,” U.S. Patent 11 302 813 B2, Apr. 12, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US11302813B2/en [23] J. A. Kittl, J. G. Hong, D. R. Palle, and M. S. Rodder, “Methods for varied strain on nano-scale field effect transistor devices,” U.S. Patent 9 978 833 B2, May 22, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9978833B2/en [24] S. Gandikota et al., “Method of reducing metal gate resistance for next generation NMOS device application,” Int. Patent Appl. WO 2024/137272 A1, Jun. 27, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/WO2024137272A1/en [25] J. Zhang et al., “Full bottom dielectric isolation to enable stacked nanosheet transistor for low power and high performance applications,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2019, pp. 11.6.1–11.6.4, doi: 10.1109/iedm19573.2019.8993490. [26] C. Yoo, J. Chang, Y. Seon, H. Kim, and J. Jeon, “Analysis of self-heating effects in multi-nanosheet FET considering bottom isolation and package options,” IEEE Trans. Electron Devices, vol. 69, no. 3, pp. 1524–1531, Mar. 2022, doi: 10.1109/ted.2022.3141327. [27] S. S. Pradhan, D. B. Bergstrom, J.-S. Chun, and J. Chiu, “Tungsten gates for non-planar transistors,” European Patent Appl. EP 3 506 367 A1, Jul. 3, 2019. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/EP3506367A1/en [28] L. Schloss and X. Ba, “Tungsten films having low fluorine content,” U.S. Patent 9 754 824 B2, Sep. 5, 2017. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9754824B2/en [29] Intel Foundry, “Accelerating AI and HPC with advanced process and packaging technologies,” Doc. 367370-001US, Jun. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-11/intel-foundry-hpc-ai-brief.pdf [30] M. Lofrano, X. Chang, H. Oprins, and Z. Tokei, “Mitigating the thermal bottleneck in advanced interconnects,” imec, Sep. 28, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/mitigating-thermal-bottleneck-advanced-interconnects [31] S. Bair, “Intel at ISSCC 2025: Navid Shahriari invited talk, eight papers, forums, panelist & product details,” Intel Community, Feb. 19, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://community.intel.com/t5/Blogs/Tech-Innovation/Edge-5G/Intel-at-ISSCC-2025-Navid-Shahriari-Invited-Talk-Eight-Papers/post/1667592 [32] D. Chandra, E. Potladhurthi, D. R. S. Reddy, and K. S. Rengarajan, “Tunable negative bitline write assist and boost attenuation circuit,” U.S. Patent Appl. 20160203857 A1, Jul. 14, 2016. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20160203857A1/en [33] Synopsys, “Advantages of firmware-based training in high-speed DDR IP,” Synopsys IP Technical Bulletin. Accessed: Sep. 14, 2026. [Online]. Available: https://www.synopsys.com/articles/firmware-based-training-ddr-ip.html [34] N. Muralimanohar, R. Balasubramonian, and N. P. Jouppi, “CACTI 6.0: A tool to understand large caches,” Hewlett-Packard Laboratories, 2009. Accessed: Sep. 14, 2026. [Online]. Available: https://users.cs.utah.edu/~rajeev/cacti6/cacti6-tr.pdf [35] Intel, “Intel Tech Tour 2024 Lunar Lake AI hardware accelerators,” Doc. 824436, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/824436/2024_Intel_Tech%20Tour%20TW_Lunar%20Lake%20AI%20Hardware%20Accelerators.pdf [36] Y.-H. Chen, J. Emer, and V. Sze, “Eyeriss: A spatial architecture for energy-efficient dataflow for convolutional neural networks,” in Proc. 43rd ACM/IEEE Annu. Int. Symp. Comput. Archit. (ISCA), Jun. 2016, pp. 367–379, doi: 10.1109/isca.2016.40. [37] Intel, “Introduction to the Xe-HPG architecture,” Doc. 758306, Nov. 4, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/developer/articles/technical/introduction-to-the-xe-hpg-architecture.html [38] Intel, “Core Ultra processors Series 3 for the edge,” Doc. 855291. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/855291/Intel%C2%AE%20Core%E2%84%A2%20Ultra%20Processors%20Series%203%20for%20Edge%20Overview_2.pdf [39] Intel Foundry, “Foveros technology brief,” Doc. 366411-001US, Feb. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-07/foveros-25d-product-brief.pdf [40] D. Das Sharma, “UCIe: Building an open chiplet ecosystem,” UCIe Consortium, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.uciexpress.org/_files/ugd/0c1418_c5970a68ab214ffc97fab16d11581449.pdf [41] Intel, “Intel launches Intel Core Series 3 processors,” Intel Newsroom, Apr. 16, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-launches-intel-core-series-3-processors-changing-the-game-for-everyday-computing.html [42] Intel, “Core Series 3 launch press deck,” Apr. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://download.intel.com/newsroom/2026/Intel-Core-Series-3/Intel-Core-Series-3-Launch-Press-Deck.pdf [43] Intel, “Intel outlines architectures for agentic AI at Hot Chips 2026,” Intel Newsroom, Aug. 24, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-outlines-architectures-for-agentic-ai-at-hot-chips-2026.html [44] Intel, “Intel accelerates process and packaging innovations,” Intel Investor Relations, Jul. 26, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/filings-reports/all-sec-filings/content/0001193125-21-224438/d199788dex991.htm [45] Intel, “Intel reports third-quarter 2021 financial results,” Intel Investor Relations, Oct. 21, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/1505/intel-reports-third-quarter-2021-financial-results [46] Intel, “3rd generation Intel Core processors bring exciting new experiences and fun to the PC,” Intel Investor Relations, Apr. 23, 2012. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/577/3rd-generation-intel-core-processors-bring-exciting
Furious Fury Blames Eddie Hearn’s Ego For Joshua Collapse
Boxing fans can’t have nice things. Less than two days after Tyson Fury vs. Anthony Joshua was finally announced for Dec. 11 in Cardiff, Wales, the bout is already in jeopardy. This potential cancellation, of course, comes after many years of fans hoping and wishing Fury vs. Joshua would fight. Sadly, the snake-bitten matchup is […]
Your Time Could Be Coming, Wilson
If Brian Brobbey’s injury is worse than feared, Wilson Isidor would be given an opportunity — could he take it?
How I would change my preseason predictions
Memphis has an off week this weekend before it starts conference play on October 3rd against Charlotte. With the Tigers off, it’s a good time to revisit my preseason predictions.
New study finds the human brain may be 'two existing neural systems' packed into one skull
"Having the brain as one organ would probably be more efficient."
Supreme Court rejects Trump-backed Missouri congressional map for third time
The justices halted a federal appeals court ruling that would have revived the Republican-friendly map for the November elections, which will determine control of Congress. There were no noted dissents.
Stockton ethics commission, political consultant registry headed for broader council review
Proposed reforms would require campaign consultants to disclose their clients and establish an independent body to investigate ethics complaints, but questions remain about costs and oversight.
William Penn Foundation offers funding to keep Academy of Natural Sciences museum open
A Drexel spokesperson did not say whether the school had declined the offer, but said, “No proposal has been presented that would provide a permanent, sustainable path forward" for the museum.
Supreme Court for the third time rejects Republican redistricting push in Missouri
A Republican effort to use a new congressional map that would eliminate one of the two Democratic-held districts in the state has again failed in court.
Melissa Barrera reveals what it would take for her to return to the “Scream” franchise after firing
Barrera was cut from the horror-comedy saga after sharing controversial posts on social media.
Mid-sized shopping center to include Thai restaurant. Here's what we know.
Renderings show the 9,660-square-foot development will be built at 101 Gerald Drive and would house Bangkok Thai restaurant, currently housed at 3904 Johnston St.
Bill introduced to support newborn health screenings
BUFFALO, N.Y. (WIVB) — Congressman Nick Langworthy was joined by Hall of Fame Bills quarterback Jim Kelly on Thursday to announce the introduction of a bipartisan bill that would dedicate fed…
ProTributeBands.com Clarifies Direct Booking Model for Corporate Event Entertainment Planners
SAN RAMON, CA - September 25, 2026 - PRESSADVANTAGE -ProTributeBands.com, the curated booking and lead generation platform for high-end tribute bands, has outlined how its direct-booking structure works for event planners seeking corporate event entertainment. Under the model, bands featured on the platform negotiate terms and close each booking directly with the client, while ProTributeBands follows up to keep the transaction moving smoothly.The structure separates ProTributeBands.com from traditional booking agencies that insert themselves into every contract. Rather than acting as an intermediary that controls the final agreement, the platform connects event planners, performing arts centers, festivals, wedding clients, and private party hosts with pre-screened, national-act-caliber tribute acts, then steps back so the parties can settle details themselves. The platform maintains contact with both sides to ensure momentum is not lost during the process.Founded by David Victor, former guitarist and co-lead vocalist of the multiplatinum band BOSTON, ProTributeBands.com features tribute acts covering artists such as Queen, The Beatles, ABBA, Journey, The Eagles, and Pink Floyd. Selected bands receive optimized profile pages and booking leads generated through the platform."Event planners often assume a booking platform means another layer of negotiation and markup," said David Victor, Founder of ProTributeBands.com. "The approach here is different. The bands negotiate terms and close each booking directly, which keeps the conversation honest and the details accurate. The platform stays involved by following up so nothing stalls between the first inquiry and the signed agreement."The direct-booking method reflects how corporate and private event planning typically operates. Planners frequently need to confirm technical requirements, stage dimensions, scheduling, and performance specifics with the people who will actually be on stage. By allowing those conversations to happen between the client and the band, the model aims to reduce miscommunication that can occur when information passes through a third party.ProTributeBands.com applies a screening process before an act appears on the platform, focusing on production quality, musicianship, and readiness for larger venues. The company ranks tribute bands across categories including Queen, The Beatles, The Eagles, Journey, Pink Floyd, and BOSTON tributes, drawing on performance quality and audience response.The ProTributeBands guide to hiring a tribute band offers additional context for planners weighing these decisions, covering topics such as understanding the audience and event, assessing entertainment value, viewing an act in person before hiring, and reviewing rider and insurance requirements. The guide addresses the practical considerations planners face when selecting an act for a corporate function, festival, or private celebration."A tribute production for a corporate audience has to hold the room the same way a headline act would," Victor said. "The vetting exists so planners can trust that the act they see listed can deliver at that level, and the direct-booking structure lets them confirm every detail with the band before committing."ProTributeBands.com serves clients across the United States and abroad, working with tribute acts that perform at performing arts centers, summer concert series, product launches, corporate parties, private parties, and wedding receptions. The platform also accepts artist submissions from tribute bands seeking consideration for inclusion. The company operates online at protributebands.com.###For more information about ProTributeBands.com, contact the company here:ProTributeBands.comDavid Victor(925) 236-0217hello@protributebands.com11040 Bollinger Canyon Road Suite E-938, San Ramon, CA 94582
Legislators abruptly stop a school behavioral health program
The $1.2 million would have paid for onsite "hubs" offering in-person or telehealth support. Ten school districts had already applied for a share of the money.