SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " shared " 1,596 found 🔀 AI-powered Shuffle
Trump administration ends $1.2M in federal grants for Wisconsin teen health programs
The Wisconsin Department of Health Services notified funding recipients on Saturday that the federal government had abruptly terminated a $1.2 million annual Teen Pregnancy Prevention grant, according to a letter shared with Wisconsin Public Radio.
Wilmington Small Business Coalition: Building Momentum in 2026 by Heather McWhorter
This article was contributed by Lydia Thomas, UNCW CIE Program Manager. North Carolina continues to be one of the best states to start a business and in 2025, Wilmington, North Carolina earned a spot on the GoDaddy list of the top 10 most entrepreneurial cities in the U.S. While many know Wilmington as small beach town with exceptional food, lots of coffee shops, and fun, vibrant summer activities, a closer look reveals a thriving innovation economy. You’ll find startups emerging across industries including software, healthtech, bluetech, and fintech. At the core of this entrepreneurial ecosystem is the Wilmington Small Business Coalition, with small business advocates and entrepreneur support organizations (ESOs) dedicated to helping founders grow, thrive, and succeed. “No Wrong Door” Established in 2016, the Coalition was designed to make it easier for individuals and small businesses to access resources most suited to their particular needs. The Coalition is designed to have a “no wrong door” entryway into the regional startup ecosystem. Whether you are exploring a new idea sketched on the back of a napkin or leading a more established, growth-stage company, Coalition members can help connect you with the programs, funding opportunities, mentors, and resources best suited to your needs. No matter where you are in your entrepreneurial journey, any Coalition organization can help point you in the right direction. Coalition Members and Leadership Coalition members include the UNCW Center for Innovation and Entrepreneurship (UNCW CIE), AARP, Brunswick Community College Small Business Center, Cape Fear Community College Small Business Center, Cape Fear Region SCORE, Genesis Block Foundation, Network for Entrepreneurs in Wilmington (NEW), Small Business & Technology Development Center (SBTDC), Greater Wilmington Chamber of Commerce, YWCA Living the Dream Center for Entrepreneurship, Carolina Community Impact Fund (CCI Fund), Partner Community Capital, 717mkt Office Collaborative, NC Biotech, and Institute NC. In May 2026, the Coalition held its leadership elections, resulting in the selection of a new executive team. The following officers were elected to serve two-year terms: Chair: Lydia Thomas, UNCW CIE Vice Chair: Diane Lantz, CCI Fund Secretary: Aariene Hansley, Genesis Block Foundation Treasurer: Gloria Monroe, SBTDC Vision for the Wilmington Small Business Coalition In 2026, the Wilmington Small Business Coalition continues its work as a collaborative network of organizations. By connecting programs, expertise, and services across partner organizations, entrepreneurs can more easily find the right support at the right time. Rather than operating in silos, the Coalition aims to function as a unified, cohesive system of support for small businesses and entrepreneurs, ensuring that resources and expertise across partner organizations are visible and accessible. Through stronger collaboration and shared pathways, entrepreneurs can move more seamlessly from idea to startup to growth. Looking to dive into the Wilmington entrepreneurial ecosystem? Connect with any of the Coalition partners to get started! Connect with CIE To learn more about CIE and our services, programs, and events, join the CIE newsletter. You can also follow us on social media: Instagram, Facebook, LinkedIn, TikTok, or YouTube. CIE’s website is uncw.edu/cie. Heather McWhorter is the director of the UNCW Center for Innovation and Entrepreneurship (CIE). CIE supports innovation-forward start-ups and helps to build a vibrant innovation economy for all in southeast NC.
Records show prior mental health petition for man accused of killing grandmother in Farmington Hills
Records show a petition was filed over three years ago seeking court-ordered mental health treatment for the 34-year-old man accused of killing his grandmother inside the home they shared in Farmington Hills.
NYC Health + Hospitals/Metropolitan and MetroPlusHealth Support New Mother of Triplets
New York, NY – NYC Health + Hospitals/Metropolitan, in partnership with MetroPlusHealth, today shared the story of Doris A. Lucio Lucio, an immigrant
Lionel Richie's ex-wife shares update on singer's condition after hospitalization
Lionel Richie's ex-wife, Brenda Harvey Richie, shared news on her former husband's health after a medical incident led to a concert stoppage and hospitalization.
Protecting Access to Established Research-Backed Healthcare
Protecting Access to Established, Research-Backed Healthcare, Including Transgender Healthcare, Is a Shared Responsibility Across Providers, Advocates, and ...
Community Health Workers Learn Perinatal Outreach Approaches at UAMS Training
LITTLE ROCK — Twenty community health workers (CHWs) from across Arkansas recently gathered in Springdale with a shared goal: to build connections and learn how to better support mothers across the state. Hosted by the UAMS Institute for Community Health Innovation, the three-day Perinatal CHW Upskill Training provided interactive, hands-on…
Alleged iPhone 18 Pro Sim Tray Again Shows Dark Cherry Color
Apple's upcoming iPhone 18 Pro models are expected to introduce new color options, including a dark cherry color, and today we may have been given another peek at the rumored finish, courtesy of the Chinese leaker known as Ice Universe. Image shared by leaker Ice Universe In an image posted on Weibo, a SIM tray allegedly from the unreleased iPhone is shown in a dark cherry colour, which could also be described in this grainy example as burgundy, brownish, or purple.
Pilates Isn't Just a Workout Anymore. It's Becoming a Business Strategy.
Pilates has become the new marketing infrastructure, giving brands a trusted way to reach customers through shared experiences.
CBS shares Lions' potential Terrion Arnold replacements
After his Monday release, CBS shared some potential Terrion Arnold replacements the Lions can consider.
"It's not gonna be good:' Local business braces for Parkway East closure
Dave Guerin, a Swissvale business owner, shared his concerns about the upcoming 25-day Parkway East closure, citing challenges for deliveries and suppliers navigating detours.
Kristen Hogan joins Essentia Health-32nd Avenue Clinic to practice nephrology
The Essentia Health-32nd Avenue Clinic is excited to welcome Kristen Hogan, an advanced practice registered nurse and certified nurse practitioner in nephrology.
Sony Pictures Entertainment invests $100m in Cosm
As lead investor in Cosm’s Series C financing round, SPE will acquire a minority ownership stake in the operator of shared reality venues showing sports and films on 27m-wide, 12K+ LED screens.
Titans Legend Chris Johnson Reveals Heartbreaking ALS Diagnosis
Former Tennessee Titans star and NFL great Chris Johnson shared his diagnosis publicly for the first time, hoping his story will inspire awareness, research, and hope for others battling ALS.
FAIR Health Price-Informed Tools Support Healthcare Decisions Among Diverse Older Adults
/PRNewswire/ -- Price-informed shared decision-making tools developed by FAIR Health, a national, independent nonprofit, can facilitate meaningful healthcare...
Read the memo sent to Comcast employees about media spinoff plans
In a memo shared with Comcast employees, the company's co-CEOs spoke of both units' "great business prospects" and "strong balance sheets."
Leaked A20 Pro Image Hints at iPhone 18 Pro Performance Gains
An alleged image of the iPhone 18 Pro motherboard has leaked online, showing the A20 Pro chip will use a new packaging technology that should offer notable performance gains over the previous model. The leaked image, which has been shared by the accounts "WHYLAB" and "Ice Universe" on Weibo, appears to show the A20 Pro chip integrated into TSMC's new packaging architecture, known as Wafer-Level Multi-Chip Module (WMCM) technology.
🎧 When belief returned: Episode five of new Coventry documentary
The relegation from League One to the bottom tier of English football starts episode five of Back Where We Belong. Under Mark Robins, Coventry City found their identity and stability on the pitch, with fans finding joy in small and shared moments. With Wasps still owning the Ricoh Arena, the Sky Blues were forced to ground-share with Birmingham City at St Andrew's.
Grand Theft Auto VI Rumored to Offer 60 FPS Mode on PS5/Xbox Series X, But Maybe Not at Launch
One of the reasons Grand Theft Auto VI fans are eager to learn the currently missing details on PS5 Pro enhancements is that the most powerful console available on the market is expected to include a performance mode targeting 60 FPS. However, according to a credible source, there's a decent chance that even the base PlayStation 5 and Microsoft's roughly equivalent Xbox Series X will support 60 FPS in Rockstar's massively anticipated game. The rumor comes from the popular Polish gaming podcast Rock and Borys, which features Remigiusz "Rock" Maciaszek and Borys Nieśpielak. It is the latter who shared in […]
The last, best hope for the Colorado GOP
If the Colorado Republican Party desires to retain any relevancy, let alone wrest back any of the levers of political control in the state, it needs to elect Barb Kirkmeyer in the June 30 primary. To be sure, Kirkmeyer would be a solid candidate for governor in any case, whether or not she shared the […]
Elon Musk shares Armie Hammer comeback film banned in Germany for violent anti-immigrant imagery
Elon Musk shared a link to stream Uwe Boll's 'Citizen Vigilante' in its entirety. The Armie Hammer comeback vehicle was effectively banned from distribution in Germany due to violent anti-immigrant imagery.
Video of Australian politician lamenting living standard figures lacks context
The leader of Australia's far-right One Nation party criticised the country's living standards in a June 2026 speech at the National Press Club, drawing praise from supporters who shared snippets of t...
Meaningful Outcomes Determine the Winners of the Health AI Race
Global investment in healthcare AI exceeded $18 billion in 2025, yet health systems still lack a shared understanding of the outcomes that investment should deliver. This paper argues that success in the health AI race will be determined not by technological sophistication but by which systems first identify and pursue the outcomes that matter most to patients, professionals and health systems. Without a shared language for defining and measuring what healthcare AI should deliver, systems risk optimizing for what is easiest to count rather than what matters most. This paper provides a framework for ensuring AI investment translates into real value for healthcare systems and the populations they serve.
Efzimfotase alfa demonstrated improvements in bone health in treatment-naïve pediatric patients with hypophosphatasia achieving median difference of 1.67 vs placebo in RGI-C Score at week 25 in MULBERRY Phase III trial
Positive results from the MULBERRY Phase III trial showed that efzimfotase alfa (ALXN1850), an investigational enzyme replacement therapy, demonstrated a statistically significant and clinically meaningful improvement in bone health in children (2 to
Assemblyman David Tangipa says California should spend more on veterans than undocumented immigrants
California Assemblyman David Tangipa shared his views on the state's budget negotiations, focusing on tax increases, spending priorities, and the implications of California's $350 billion budget.
Maryland Christian Chamber of Commerce blends faith and business as membership grows
Since its launch in March 2026, the Maryland Christian Chamber of Commerce has grown to more than 100 member businesses, hosting networking events, prayer calls and monthly forums. The new organization blends Christian values with business principles to support entrepreneurs and foster a shared sense of purpose across Maryland.
Bad news: Netflix now wants every single profile in your house to have its own email login
Netflix quietly updates how shared accounts work
Netflix wants everyone in your house to have their own email login now
Netflix is quietly changing how shared accounts work, one profile at a time.
NFL legend reveals real reason why Antonio Brown left Steelers
NFL legend LeSean McCoy shared the real reason Antonio Brown left the Pittsburgh Steelers following the 2018 season.
Jimmy Butler shares ACL rehab update, expectations for Warriors next season
Jimmy Butler shared an encouraging update on his ACL injury rehab and his expectations for the Golden State Warriors in the 2026-27 NBA season.
Cheshire orchard closes after 75 years in business
A longtime Cheshire orchard has announced its closing for good. In a message shared with customers, the family that owns Drazen Orchards said it is now permanently closed and will not reopen for the foreseeable future. The orchard has been open since 1951. The Drazen family said the decision was difficult, citing rising operating costs, the physical demands of running…
Politics in the Park: GOP gubernatorial candidates share visions for Wyoming governor
CASPER, Wyo. — Three Republican gubernatorial candidates shared their views on a myriad of topics spanning taxation, energy production, resource rights
Politics in the Park: GOP gubernatorial candidates share visions for Wyoming governor
CASPER, Wyo. — Three Republican gubernatorial candidates shared their views on a myriad of topics spanning taxation, energy production, resource rights
Mercy Helps Position St. Louis as Global Gateway for Healthcare Innovation
Mercy continues to bring innovative thought leadership to the communities it serves and beyond. Dr. Damon Broyles, Mercy vice president of clinical innovation, informatics and precision medicine, recently shared insights and helped attract new companies to St. Louis’ nationally recognized healthcare industry as part of BioSTL.
Sony Pictures Entertainment Invests $100M In Cosm, Operator Of "Shared Reality" Venues
Sony Pictures Entertainment has made a $100 million strategic investment in Cosm, a venture-backed operator of "shared reality" venues.
Julian Edelman's blunt advice for Patriots with Christian Gonzalez
Julian Edelman shared his thoughts on the ongoing contract situation between the Patriots and star cornerback Christian Gonzalez.
Democratic socialists just dominated New York — and are coming for 2028
The group is asking members across all 250 chapters to weigh who they want to back in the next presidential election and why, according to a plan first shared with POLITICO.
UK Police hosts campus, health care and public safety leaders for Safer Kentucky Symposium
The University of Kentucky Police Department brought together leaders from private colleges, public universities, health care institutions, public safety agencies, emergency management and student affairs for the Safer Kentucky Symposium, a statewide conversation focused on strengthening safety through communication, coordination and shared responsibility.
Jeremy Clarkson's health dilemma 'common among farmers'
The TV star shared his worried treatment would overlap with a busy period for his Cotswolds farm.
Melissa Gilbert leaves NYC amid husband Timothy Busfield's legal troubles
Melissa Gilbert is leaving the Big Apple apartment she shared with husband Timothy Busfield after eight years.
Oracle Backend for Microservices and AI: The Business Value of a Microservices Backend Platform
Discover how Oracle Backend for Microservices and AI (OBaaS) 2.1.0 provides a shared backend foundation for microservices and AI-enabled applications, helping teams standardize gateways, observability, messaging, configuration, workflow coordination, and Oracle AI Database integration.
Google TV Streamer update adds Google Home Speaker support, more
Following the rollout two weeks ago, Google has shared what’s new in the latest Google TV Streamer update.
Josh McBride
Amazon Prime Day is underway, and entertainment and lifestyle expert Josh McBride shared some standout deals to help shoppers save big.
This four-winged dinosaur may have terrorized Earth's earliest birds
A newly discovered feathered dinosaur called Jian changmaensis may be the missing predator responsible for mysterious piles of crushed prehistoric bird bones in China. The four-winged glider, a close cousin of Velociraptor, helps reveal how early birds and their dinosaur relatives shared the same ancient landscape.
Kyle Busch's wife pays tribute to late NASCAR driver: 'The Father’s Day cards that were already made'
Kyle Busch's wife, Samantha Busch, shared an emotional Father's Day tribute to the NASCAR driver after his death. 'Watching these memories hurts more than I can explain,' Samantha wrote.
Interwell Health delivers savings, top quality scores in Kidney Care Choices Model
Interwell Health, the largest participant in the Center for Medicare and Medicaid Innovation's Kidney Care Choices (CKCC) Model, has produced shared savings of $273 million in its first three years while also receiving top quality scores in that period, Interwell, a unit of Fresenius Medical Care, said this month.
Sam Reid on what Claudia and The Vampire Lestat have in common
"They are similar. They have a shared experience."
Tybout House owner highlights local business at Council
Victoria Boehmer, owner of Tybout House on Market Street and a leader in several local community initiatives, shared the story behind her business and its growing impact on the region during Monday night’s Warren City Council meeting. Boehmer described Tybout House as much more than a traditional yarn store. The business works closely with local […]
Sandra Bullock shares photo of late dad holding her kids in emotional Father's Day tribute
Sandra Bullock has shared a moving tribute to her dad, John Wilson Bullock, who died at 93 in 2018, in which she wished the WWII vet a 'Happy Heavenly Father's Day.'
Owner, founder of St. Louis business Jilly’s Cupcake Bar & Cafe dies
Jilly’s Cupcake Bar & Cafe shared Saturday that the business’ owner and founder, Jill Segal, has died.
Jeremy Clarkson in remission from prostate cancer
The 66-year-old announced the positive news days after he shared his "aggressive" cancer diagnosis.
Nintendo Switch Sports Resort confirms 100 Pin Bowling, here's a first look
Nintendo Switch Sports Resort, which was recent announced, has confirmed that 100 Pin Bowling will be included. Nintendo itself shared the news, posting a screenshot on its Japanese website. 100 Pin Bowling was a part of the original Wii Sports Resort. It’s still ultimately about bowling, but the mode is set up in a triangular formation and obviously has you...
CBS Sports will need a new NFL booth
CBS Sports is heading into the 2026 NFL season with presumably two open slots in its fourth broadcast booth. ESPN re-signed Jason McCourty to a new multi-year exclusive deal on Thursday, pulling him away from the CBS booth he shared last season with play-by-play man Andrew Catalon, analyst Charles Davis, and sideline reporter A.J. Ross.…
Anne Hathaway is pregnant with her third child
Anne Hathaway is pregnant with her third child. On Friday, the Oscar-winning actor shared an Instagram video showing her baby bump. The 43-year-old captioned it “Baby, I'm yours” and used
Wealth correlation with soccer ability? - Live Updates
It’s not just about soccer. Follow live reporting on the politics, diplomacy, business and power plays surrounding the world’s biggest sporting event.
Anne Hathaway is pregnant with her third child
Anne Hathaway is pregnant with her third child. On Friday, the Oscar-winning actor shared an Instagram video showing her baby bump. The 43-year-old captioned it “Baby, I'm yours” and used
Most Women Give Birth at Night—Scientists Reveal the Surprising Reason Why - Futura-Sciences
The Night Owl Mystery of Labor This isn’t just a feeling shared by midwives and obstetricians doing overnight shifts. Research, including studies published by University College London in the Journal of Obstetrics and Gynaecology, confirms this trend: spontaneous births cluster significantly during the nighttime hours. Behind this pattern lies our...
Long list of U.S. concessions to Iran raises specter of a 'lost war'
Details of the framework peace agreement were finally shared with the public, revealing a raft of compromises with Tehran long opposed by Republicans.
UMG, The World’s Biggest Music Company, Is Investing In A Mental Health Ecosystem. Here’s How It Works
Universal Music Group's circle of shared care, access and economic responsibility that streamlines the process to obtaining mental health support from trained Amber Health clinicians is a blueprint for companies large and small.
Rockstar quietly gives us probably our best look at GTA 6's Vice City yet
Rockstar has also shared the cover art and more official images along with the pre-order release date for GTA 6 on PS5 and Xbox Series X/S.
"Lost Civilizations" Linked by DNA: What Scientists Just Uncovered Changes Everything - Futura-Sciences
Megalithic Mysteries: A Shared Heritage Revealed At the closing of the Neolithic era, roughly between 4500 and 2800 BCE, vast megalithic monuments began to rise across Europe. These massive stone structures, often used as collective burial chambers, are a testament not only to strong local traditions but also hint at...
Braves' Ronald Acuña Jr. Faces Extended Recovery from Hamstring Injury
Atlanta Braves manager Walt Weiss shared an update on Ronald Acuña Jr.’s injury before Wednesday’s game against the San Francisco Giants.
New science advisory council forms to help US government ‘resolve the UAP mystery’
Theoretical physicist and Harvard University Professor Avi Loeb shared early details about the new UAP Science Advisory Council.
Scott vetoes Legislature’s latest attempt at healthcare reform
The governor said he wants savings to be shared equally among insurance buyers, not only the two groups targeted by the bill. Others say the savings just aren’t there.
Stuart Gilly on leading through uncertainty: Why moving forward is the key
In June’s episode of “Strictly Business”, entrepreneur, investor and leadership coach Stuart Gilly shared a powerful message about leading through uncertainty. His central insight is that great leaders are not defined by certainty, but by their willingness to move forward when certainty is impossible. Gilly’s leadership journey began at age 15 when he started a […]
iPhone Ultra final design shared by Apple’s nemesis
Despite the ongoing legal battle, leaker Jon Prosser has been active in sharing leaks and renders for upcoming iPhone models. His latest could very well be the final version of the iPhone Ultra.
Moving Beyond Resilience: Rebuilding the Public Health Workforce with Intention
At the Mission Critical summit, public health leaders shared forward-thinking approaches to invest in people, retain talent, and rethink how work happens.
Mid-Atlantic Fishery Management: Science, Stewardship, and Shared Successes
One of the most innovative aspects of the Magnuson-Stevens Act was the establishment of eight regional councils to manage fisheries. Across the country, regional councils are tackling their own unique challenges, each shaped by their local coastal communities and united under a shared framework.
2026 Governors’ Health and Human Services Policy Advisors Institute
Health and human services policy advisors from states and territories across the country gathered in New Orleans for NGA’s annual HHS Policy Advisors Institute. Over one and a half days, advisors shared priorities, surfaced common challenges, and learned from peers on topics ranging from healthcare affordability to child welfare, SNAP administration, and the use of […]
Americans agree that childcare is expensive. Democrats are running on it.
In a memo shared first with The 19th, three top Senate Democrats say Trump and Republicans have ‘taken a wrecking ball’ to childcare.
Sign in with Apple and Hide My Email are getting a new shared email domain
Apple announced today that it will soon use a single shared domain for private email addresses generated by Sign in with Apple and iCloud+ Hide My Email.
Business Monday: New small business network offers support for aspiring entrepreneurs on the Big Island
The new network seeks to cultivate local businesses grounded in cultural values and shared prosperity through mentorship, funding and resources.
Fitzgerald tells ‘UpFront’ Packers will be fine as he explores issues with NFL, Sports Broadcasting Act
Fresh off his hearing on Capitol Hill, U.S. Rep. Scott Fitzgerald said the NFL may be violating the Sports Broadcasting Act and quickly dismissed concerns from the Green Bay Packers about any changes to the league's shared revenue model.
Is SMIC N+3’s Metal Pitch Smaller than Intel 18A’s?
Almost four years ago, we published that SMIC had started shipping 7 nm (N+1) chips. Now, SMIC is shipping its third-generation 7 nm (N+3) process in Huawei’s Kirin 9030, with a minimum metal pitch of 32.5 nm, about 10% tighter than the 36 nm minimum metal pitch shipping in Intel’s latest Panther Lake CPUs on 18A. The headline is true, but incomplete cherry picked metric. N+3 reaches the density of TSMC N6 through aggressive DUV multi-patterning and design-technology co-optimization (DTCO), but it pays for that in complexity, efficiency and process control. We found this and more in our reverse engineering and teardown where we cover SMIC’s N3 process technology, Huawei’s packaging, memory, architecture, and more. SemiAnalysis has been building a state-of-the-art teardown lab in Oregon capable of analyzing the world’s most advanced and important chips over the last year and half. We have already generated revenue on advanced datacenter chip teardowns including our recent reverse engineering of a major TSMC customer’s COUPE CPO optical engine + EIC 3D stack. This is the first public report from the SemiAnalysis Teardown Engineering & Evaluation Lab, or STEEL for short. The lab is aggressively scaling up and out and we’re excited to announce it publicly. This is a bit of inconvenient timing for TechInsights as they are private equity owned and currently being sold while having enjoyed virtually no credible competition for decades. This has led to TechInsights underinvesting in CAPEX. SemiAnalysis exceeds TechInsights in revenue despite no venture or private equity ownership and being founded only 6 years ago. Because we have no external investors and are founder led, we move faster, build faster, and we can release client chip teardowns for free regularly, while focusing on datacenter for our major clients. Here’s the first public image from our lab, the HiSilicon Kirin 9030 Pro SoC: This report will detail our teardown of the Kirin 9030 and our findings on SMIC’s N+3 process, the most advanced in China. For comparison, we’ll show our teardown of the MediaTek Helio G99, made on TSMC N6. Through this comparison, we can look at the effect of export controls – SMIC N+3 and TSMC N6 are comparable nodes, but one is heavily export-controlled, the other free to use the West’s most advanced equipment. Here we see both China’s progress and constraints. SMIC N+3 reaches TSMC N6-class logic density, but it requires far more aggressive DUV multi-patterning, so it does not match N6 on process maturity or cost. The Kirin 9030 Pro performs similarly to three-year-old Android flagships, and trails far behind the current flagship SoCs from Apple, Qualcomm, MediaTek, and Samsung. The efficiency gap is even wider. Export controls have not stopped Huawei and SMIC from shipping advanced silicon, but they have forced a different path. Without EUV, SMIC is leaning harder on DUV multi-patterning, DTCO, and increasingly complex integration. The roadmap continues forward through tighter design rules and backside power, but each step adds cost and process risk. Huawei’s τ scaling and LogicFolding show another path: stacking active logic and recovering density through advanced packaging and system-technology co-optimization (STCO). To understand the Kirin 9030, we must first understand Huawei’s SoC history. HiSilicon is Huawei’s chip design arm, responsible for the Kirin smartphone SoCs, Kunpeng server CPUs, Ascend AI accelerators, and switch/router networking silicon. Before export controls, Huawei was TSMC’s largest customer – the only customer on TSMC’s first EUV node, N7+, and among the first on N5, alongside Apple. That ended in late 2020. Huawei switched to Qualcomm SoCs in its flagship smartphones, though export controls limited them to 4G-only variants. In late 2023, Huawei returned to in-house silicon with the Kirin 9000s, a successor to the Kirin 9000, fabricated on SMIC N+2 instead of TSMC N5. In the following years, they released the Kirin 9010 and 9020 on the same N+2 process. These chips used Huawei’s in-house TaiShan CPU cores and Maleoon GPU. We have not torn down a Kirin 9020 ourselves, so the predecessor die shot is from Kurnal. The die shots show how Huawei spent its silicon budget: which functional blocks are where, and how their areas compare to the predecessor. First, a quick guide to the major blocks on the die. The total die area is nearly identical, but the 9030 uses that area more aggressively. A denser process lets Huawei fit an extra middle CPU core, more GPU and NPU cores, and larger caches into the same footprint. In contrast, the Helio G99 is a much smaller, low-cost SoC, built for budget smartphones rather than a flagship device. While the Kirin 9030 is ~140 mm², the G99 is only ~29 mm², roughly one-fifth the area. The underlying TSMC process technology, however, is directly comparable as a baseline for analyzing SMIC’s. The Kirin 9030 is an evolutionary refresh, not a clean-sheet design. Its CPU, GPU and NPU cores carry over the 9020’s families, and the gains come from three levers: the SMIC N+2-to-N+3 process step, DTCO and floorplan work, and incremental microarchitecture. Area is where the first two show up, and the 9030 scales well here. Performance and efficiency are the harder test. Huawei’s design holds up better than its node would suggest, but the chip still trails, both because N+3 sits behind the leading-edge nodes and because its cores, while competent, remain a few generations behind the newest designs. The new prime core is an incremental update. The main changes are a 10% frequency increase from 2.5 GHz to 2.75 GHz and a doubling in the L2 cache from 1 MiB to 2 MiB. Despite the increased cache, the core size decreased by 7.6%. Excluding the private L2 cache, the core size decreased by 21%. This is a large reduction for an incremental node. Compared with the TaiShan New V120 core in the Kirin 9020, the Kirin 9030’s middle core is almost unchanged architecturally, yet each core shrinks by ~22%. Most of that comes from the move from N+2 to N+3, with layout likely accounting for the rest. Visually, the most noticeable change is the increase from 3 middle cores to 4. There is also a 20% increase in the shared L3 cache of the big cluster. This helps to improve multi-core performance without sacrificing much in terms of area. Even with each core shrinking, the big CPU cluster’s total area is essentially unchanged. The per-core savings went back into an additional middle core and larger caches. The tiny cores shrank less than the prime core (excluding its L2 cache) and less than the middle cores. This is likely because fixed overhead is a larger share on a small core. We cannot resolve any architectural changes from the die shot alone, but the per-clock and efficiency gains shown below point to more than pure process and layout scaling. The area reduction was offset by a doubling of the shared L2 cache from 2 MiB to 4 MiB, leaving the total tiny CPU cluster area slightly larger. Area is the easiest improvement to see from a die shot, but it is only one part of PPA (power, performance, area). For modern logic, power and performance matter just as much, and often more. Since Dennard scaling broke down in the mid-2000s, voltage and frequency have not scaled in step with transistor dimensions, so each node has had to fight harder for gains in performance and efficiency. The starkest comparison is not Kirin 9020 versus Kirin 9030 Pro. Apple’s efficiency cores run circles around Huawei’s prime core. Apple’s low-power core delivers 20% higher integer performance while drawing only 1 W, compared with 4.5 W for Huawei’s prime core. N+3 matches TSMC N6, but N6 is several generations old. Apple and Qualcomm build on N4 and N3P, which are denser and sit on a better voltage-frequency curve, giving them a larger transistor budget and more performance per watt. The 9030’s own cores did improve. The middle and tiny cores gained 17% and 14% in per-clock integer performance over the 9020, with floating-point flat on the middle core and up 11% on the tiny. The tiny core improves cleanly, with performance rising while power falls and efficiency increases by 45% in integer and 24% in floating point. The middle core is mixed: integer performance rises but power rises faster, cutting integer efficiency by 7%, while lower power lifts floating-point efficiency 16%. Per-clock gains at the same or lower frequency are microarchitectural, so the cores are tuned, not just shrunk. Both also failed to hold their rated maximum frequencies, pointing to thermal, power, or stability limits. Per clock, the middle core sits around Arm Cortex-A720 and the tiny core near the Cortex-A520; absolute performance trails because Huawei clocks them much lower. The prime core is roughly Cortex-X2 class per clock, a 2021 design. Apple’s 2020 M1 Firestorm core is still 35% higher per clock and 57% faster in absolute integer performance at a similar 4.5 W. The current leading edge is further ahead again: the Apple M5 P-core is 60% higher per clock and 2.7× faster, the Arm C1 Ultra 45% higher and 2× faster. Matching older high-end cores per clock is a genuine design achievement. What Huawei cannot match is the voltage-frequency curve and transistor budget of leading-edge nodes, which let Apple, Qualcomm and others spend more transistors in the same area on wider cores, larger caches and deeper buffers while running at lower voltage. Huawei’s LogicFolding roadmap is one answer, stacking active logic to recover density and shorten signal paths. We return to it later. The GPU compute units (CUs) changed more visibly than the CPU cores, moving to a more rectangular layout for both the arithmetic logic unit (ALU) clusters and the CU overall. Even with ray-tracing support added, a CU shrank ~28%. However, that shrink is offset by the increase from 4 to 6 CUs and the area outside the CUs grew 33%. Overall, the GPU cluster is larger by ~10%. The GPU is where Huawei makes its biggest gains. The Maleoon 935 is not competitive with current flagships, but it is a large step up from the 920 and reaches older-flagship territory. In 3DMark it is 70% faster in Wild Life Extreme (WLE) and 79% faster in Steel Nomad Light (SNL) than the 920; with 11% higher clocks and 50% more CUs, the ~67% theoretical uplift roughly matches WLE and is beaten by SNL. It edges ahead of the Snapdragon 8+ Gen 1 in WLE and SNL, and the Dimensity 9200 and Apple A16 in WLE, but stays far behind newer parts: the Snapdragon 8 Elite Gen 5 and Dimensity 9500 are ~2.4–2.6× faster in WLE and ~3.2× faster in SNL. The Maleoon 935 is Huawei’s first GPU with hardware-accelerated ray tracing; there it lands slightly ahead of the Exynos 2200, and on par with the Apple A16, with current flagships up to 3.7× faster. The Neural Processing Unit (NPU) saw the largest structural changes of any block, moving from a Lite and a Tiny core in the Kirin 9020 to a Lite and two Tiny cores in the Kirin 9030. Both core types also show significant layout changes. This is a reversal in Huawei’s NPU design. The Kirin 9000 5G, its last flagship chip on TSMC N5, used two Lite and one Tiny core. The series of SoCs on SMIC N+2 moved to one Lite and one Tiny core, likely for area savings. With the Kirin 9030, Huawei has shifted back toward a larger multi-core NPU cluster, but with the additional area going to a Tiny core rather than a Lite core. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Before diving into the process stack, the package and memory are worth separating from the SoC itself. The Pro variant of the Kirin 9030 carries 12 GB of Samsung DRAM, with two stacks of four dies each. The dies were identified as the K4L2E165YD, a 12 Gb LPDDR5X-9600 device fabricated on Samsung’s 1a node, the fourth generation of its 10 nm-class DRAM after 1x, 1y and 1z. 1a has shipped in volume since 2022, so this is current memory rather than older-node inventory. The 16 GB Pro Max variants we obtained were found with both CXMT and Samsung packages. The CXMT package is marked CXDD7JEDM, with two stacks of four dies, packaged in week 45 of 2025. The inferred die dimensions from X-ray computed tomography (CT) are consistent with a known density of ~0.3 Gib/mm² for the CXMT G4 process, roughly equivalent to other manufacturers’ 1z processes. The Kirin 9030 uses a typical integrated package-on-package (iPoP) stack: multiple DRAM dies in a memory package sit above an organic redistribution layer (RDL) interposer, which sits above the SoC and package substrate. The full package is then mounted to the printed circuit board (PCB) through ball-grid array (BGA) solder bumps. The memory package substrate is a thin bismaleimide-triazine (BT) laminate carrying the LPDDR5X stack. The organic RDL interposer over the SoC routes the PoP signals around the die and carries possible dummy thermal copper pillars. The package substrate, a thicker Ajinomoto Build-up Film (ABF) build-up over a BT core, fans the flip-chip bumps out to BGA pitch and embeds the power planes. The whole stack is organic. The only silicon is the SoC and the LPDDR5X dies; there is no silicon interposer. Keeping it all-organic brings the package’s coefficient of thermal expansion (CTE) close to the PCB’s, reducing board-level warpage, and avoids the cost of a silicon interposer the SoC’s bandwidth does not need. In an iPoP stack, the memory package connects to the organic RDL interposer through an array of solder bumps. Underfill fills the gap around those bumps, adding stiffness and protecting the joints from mechanical stress. The Pro and Pro Max variants differ here, which we cover behind the paywall. The die shot and architecture tell us how Huawei allocated its silicon budget. The process tells us what SMIC can manufacture. We use the Helio G99 as the process reference for TSMC N6. Both SMIC N+3 and TSMC N6 are evolutions of previous 7 nm-class nodes. We used targeted TEM cross-sections through logic and memory regions, imaged in both fin-cut and gate-cut directions. Each cross-section caption gives its horizontal field width (HFW), the real width of the imaged area. We start at the transistor fins, then move up through standard cells, local interconnect, and SRAM. SMIC has not overtaken Intel or TSMC. It uses aggressive DUV scaling and DTCO to reach N6-class density, but that density doesn’t translate into comparable performance and efficiency, for two reasons: the node gap to leading-edge nodes, and Huawei’s core designs. Fin Profile One of the most important knobs in a FinFET process is the fin profile: the shape of an individual fin and the channel where current passes from source to drain. The ideal fin is tall, narrow, and nearly vertical. A taller fin increases effective channel width, while a narrower fin improves electrostatic control by thinning the body the gate must control. Push either too far, and the process pays for it: weaker drive current, fragile fins, taper, footing and line-edge variation that hit yield and device variability. The Intel 22 nm, 14 nm, and 10 nm fin cross-sections show how FinFET nodes have improved over time. 22 nm fins were a first-generation structure, relatively short, wide and strongly tapered. The shape limits current density and reduces gate control uniformity across the height of the fin. At 14 nm and 10 nm, Intel pushed the fins taller and narrower while also making the sidewalls more vertical. Rather than shrinking the device, these changes increase the effective channel width per fin and improve electrostatic control. The trade-off is that taller fins at tighter pitches are much more difficult to manufacture. Now, let’s compare the Helio G99 on TSMC N6 with the Kirin 9030 on SMIC N+3. Both processes are in the same class, with fin pitch of 30-32 nm on N+3 and 34 nm in our N6 cross-section. The pitch for N6 is especially interesting as N7’s HD library is generally listed with a 33 nm fin pitch, and N6 did not shrink pitches directly. Its density gains came from DTCO instead of tighter pitches. The 34 nm pitch was stable across our sampled region and serves more as a comparison against the SMIC N+3 we have not investigated further. Pinning down N+3’s fin patterning scheme takes more than one core unit. The CPU cores show a dense ~32 nm pitch, with the pitch between N-P fin pairs alternating between 78 and 88 nm. Logic alone may be consistent with dual-pitch mandrels of 120 and 110 nm, but this is a complex and unusual approach. Combining the pitch from the the 8T SRAM, which has more complex repeat unit, with the CPU core sequence allows us to reverse engineer the patterning steps with more confidence. As both the logic and SRAM should share the same base grid, a single CD mandrel lithography pattern with 128 nm pitch undergoing SAQP produces a die-wide ~32 nm grid (128 nm/4), which supports the pitch sequencing seen in both logic and SRAM cells. In the sampled cross-sections, N+3 shows a taller, narrower, higher-aspect-ratio fin than N6. The measured fin aspect ratio is ~9.5:1 on N+3 versus 7.8:1 on N6. N+3 also shows less top rounding, with an estimated radius of ~2 nm, compared with 2.8 nm on N6. Even though the fin widths differ, the ratio of top rounding to fin width tells the same story, with N+3 at 0.37 and N6 at 0.44. In a geometric sense, lower is better; a perfectly rectangular fin would have no top-rounding penalty. These are single-digit-nanometer features measured from a handful of cuts, so treat the absolute numbers as approximate. The important result is the relative gap: N+3’s fins are consistently taller, narrower and less rounded than N6’s. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Standard Cell A standard cell is the basic building block of chip layout: a fixed-height row pairing one NMOS and one PMOS transistor that share a gate, tiled in a grid to build logic blocks. The key dimensions are contacted gate pitch (CGP), cell height (CH), fin count, and the lower-metal routing grid. To measure density, we use the Bohr metric: a weighted average of NAND2 gate area (60%) and scan flip-flop area (40%). This represents a realistic mix of combinational and sequential logic. This metric has its limitations, especially for complex cell layouts like TSMC’s FinFLEX, which alternates cells with different fin counts. Even so, it is the best metric for a pure process-level comparison. Another important measurement is the fin pitch; it refers to the distance between two fins of the same transistor. In a FinFET process, multiple fins are used in each transistor to increase the drive current and thus performance. TSMC N6 ships both a high-density (HD) library with 2 PMOS and 2 NMOS fins per cell, and a high-performance (HP) library with 3 of each. More fins under the shared gate mean more effective channel width. HP cells switch harder at the cost of area. Designers mix the two on a die, primarily spending HP cells on timing-critical paths, and matching their PPA targets. In the Cortex-A55 core of the Helio G99, we found a cell height of 240 nm for the HD cell. MediaTek has used HD cells in the G99 to minimize die size and thus cost. As an SoC for budget smartphones at ~$100, this is essential. By contrast, we found only one library in the Kirin 9030, with 2 NMOS and 2 PMOS fins. This suggests a narrower library strategy than TSMC N6, where both HD and HP libraries are widely used. This likely reflects the smaller customer base and the more constrained domestic design and electronic design automation (EDA) ecosystem. In all three CPU cores of the Kirin 9030, we found cell heights of 228 nm, 5% smaller than on N6. This is also a reduction of 9.5% over SMIC N+2’s cell height of 252 nm. SMIC N+3 and TSMC N6’s HD library both feature a CGP of 57 nm. For SMIC, this is a 9.5% shrink over N+2. In the past, CGP and cell height alone may have been enough to compare transistor density. Now, however, we must consider scaling boosters and DTCO as well. SMIC’s density gain does not come from EUV. It comes from using every available DTCO booster aggressively. First is fin depopulation: reducing the number of NMOS and PMOS fins in each cell. The first FinFET nodes started with 3 or 4 fins for each transistor. SMIC N+3 and TSMC N6 HD both use only 2 fins per transistor, trading drive strength for density. Next is contact over active gate (COAG). By landing the gate contact directly over the active gate, instead of out over the isolation region, the cell height drops. N+3 integrates COAG while N6 does not. Our N+3 gate-cut cross-sections indicate COAG, with the gate contact sitting over the active region, while N6 shows an off-gate contact. Last is single diffusion break (SDB). Diffusion breaks are inserted between cells in the same row to provide electrical isolation, but they also introduce local layout effects (LLE), layout-dependent shifts in electrical characteristics. In the past, a double diffusion break was used, consuming the space of two CGPs. SMIC N+3 and TSMC N6 instead use SDB, saving area but increasing LLE sensitivity. This must be controlled at the process level and accurately modeled in the process design kit (PDK) so that EDA tools can account for it. Overall, SMIC N+3 has a transistor density of 113.4 MTr/mm², slightly above TSMC N6 at 107.7 MTr/mm². Even without EUV, SMIC has achieved density beyond TSMC’s mature N6 node which utilizes EUV. Metal Stack The smallest critical dimension in the teardown is M0; SMIC N+3 uses a 32.5 nm local metal pitch. That is smaller than the 36 nm M0 pitch on Intel 18A in Panther Lake. However, this does not mean that SMIC has a better process than Intel 18A or TSMC N3P. M0 is a local intra-cell routing layer. Its usefulness depends on the full interconnect stack: M1 and M2 pitch, track count, via and line resistance, design rules, mask count, overlay control, and routing flexibility. The 32.5 nm M0 is consistent with self-aligned quadruple patterning (SAQP), whose four-population line-width loading we read coarsely as alternating widths of 21.5 to 24 nm; M1 and M2, at 38 and 40 nm, are consistent with self-aligned double patterning (SADP), a single A/B split. On TSMC N6, M0, M2, and M3 sit at a relaxed ~40 nm and are consistent with SADP-class double patterning, with no need for quadruple patterning. That said, we measure M2 for example at ~43 nm, likely inflated by sparse routing. We do not assign any specific layer to EUV from our cross-sections; the distinction we can draw is double versus quadruple patterning, not lithography wavelength. Transistor-level density in the front-end-of-line (FEOL) sets an upper bound, but the design is ultimately limited by what the interconnect stack can route. The lowest metals are the most important for standard-cell density, but the semi-global and global layers determine how usable that density is at the block and chip level. Two axes are commonly used for chip cross-sections: the fin-cut and the gate-cut. The micrograph above is a fin-cut and shows metals 0 through 3. This axis lets us see the even-numbered metals, with M0 right above the fins. There are two kinds of M0 lines. The first are the power rails; these are wide wires for the VDD and VSS running horizontally at the top and bottom edges of each standard cell. The wide wires measure 55 nm across, more than double the other M0 lines. Their width minimizes resistance and reduces IR drop. The second kind are intra-cell wires, short segments within the cell that connect terminals to M1. These have alternating widths between 21.5 and 24 nm. The M0 pitch is 32.5 nm, a 19% reduction versus N+2 and N6. At this pitch, DUV patterning requires more aggressive multi-patterning, increasing mask count, overlay sensitivity, process complexity and cost. M0 is below what a single DUV-defined spacer (SADP) can resolve, so SMIC cascades a second spacer step (SAQP). The cross-section reflects the cost: the M0 trenches are visibly more re-entrant (narrower at the bottom than the top) than M1 or M2 on the same chip and carry a bright barrier-rich foot where the trench meets the etch-stop layer. That shape is partly the intended damascene profile, as a slightly narrow bottom helps void-free copper fill, but its magnitude at M0 is driven by the tight pitch and the higher trench aspect ratio. Intel 18A supports an M0 pitch of 32 nm, although Panther Lake has only shipped with a looser 36 nm pitch. This is due to Intel’s heavy usage of HP libraries. Among leading-edge nodes, 18A has the loosest M0 pitches due to PowerVia. With power routing moving to the backside, congestion is reduced, and the entire front-side metal stack can be used for signal routing. M2 is the first true inter-cell routing layer. It runs horizontally like M0 but spans across multiple cells to carry block-level signals. The M2 pitch sets the cell’s track height – the number of M2 tracks that fit between the VDD and VSS rails, defining what the library calls a 6-track or 7.5-track cell. This layer is the most important, limiting the routing of entire blocks. SMIC N+3 features a 5.7-track cell. The M2 pitch is 40 nm, a 5% decrease over N+2 and the same as N6. This shrink keeps the pitch at the edge of what is possible with double patterning. Future nodes will need to increase the number of masks for M2 as reducing the number of tracks is much harder due to the limitations in routing. The micrograph above is in the perpendicular direction, the gate-cut, and shows metals 0 through 4. This allows us to see and measure the odd-numbered vertical metal layers. The M1 pitch is 38 nm, 9.5% less than N+2 and 33% less than N6. The M1-to-gate ratio matters because it sets local routing flexibility. N+2 and N+3 use a 3:2 ratio, while N6 uses a 1:1 ratio, explaining the huge differences in M1 pitch. The more M1 lines there are compared with the gates, the more flexibility there is for power and signal crossing within the cell. Routing flexibility enables more complex and better cells. Clean fractional ratios are also preferred as a grid is periodic and improves layouts. The 3:2 ratio gives SMIC more local routing flexibility than a strict 1:1 grid, but it also complicates layout and patterning. This is a DTCO choice, with SMIC increasing process complexity to recover density and routability without EUV. This 3:2 ratio is not very popular in the leading-edge nodes. TSMC has only used it on N7+, the N5 family, and the short-lived N3(B). They have switched back to a 1:1 ratio for N3E. Intel has only used it on the 10 nm/Intel 7 family, with Intel 4, 3 and 18A all using a 1:1 ratio. Samsung is the only one still using a 3:2 ratio at the leading edge, using it in the SF4 and SF3 families. It remains to be seen if SMIC will remain at a 3:2 ratio or move to a 1:1 ratio with its future nodes. The industry is still actively exploring these local-routing ratios. At VLSI 2026, imec will be presenting work on even higher ratios, including a 2:1 scheme that can reduce area by up to 14%. We will be covering the conference in a future newsletter article. Subscribe We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. The final local interconnect layer for N+3 is M3, with a pitch of 44 nm. The M3 pitch is the same as on N+2 and 10% larger than on N6. The semi-global layers carry the majority of block-level signal routing. They have a coarser pitch than the lower local layers. On leading-edge nodes, they are designed to sit at the limit of DUV single patterning. M4 through M11 pitches were found divided between 80–82 nm (M4–M6), 128 nm (M7–M10), and 148 nm (M11). Given limited sampling, it is possible these are divided further in dense routing areas. At the top are two giant metal layers, M12 and M13. These have kept the same pitches as N+2 at 1920 nm and 4600 nm respectively. While the lower layers’ pitches are generally fixed by the process and library, the upper layers vary much more in pitch and count, depending on the design. Even two smartphone SoCs on the same process can have wildly different metal stacks. The Helio G99 carries fewer routing layers, reaching coarse metal pitches of 850 nm by M9, while the larger and higher-performance Kirin 9030 keeps fine pitches until M11. SRAM At the leading edge, SRAM is much more difficult to scale than logic. TSMC’s latest nodes have seen little to no bitcell scaling, while logic still has more DTCO levers to pull. While looking for other logic libraries in the GPU compute units, we stumbled upon the SRAM. The most common type of SRAM has 6 transistors (6T), but this cell had 8 transistors (8T) instead. 8T SRAM adds two transistors to form a dedicated read port. Unlike a 6T cell, where reading disturbs the storage, the decoupled read port removes read-disturb, improving read stability and letting the cell be pushed harder for performance. At first glance, the cut looked like an unusual logic library, with each cell row having 3 fins of one polarity and 5 fins of another. The rows also alternated in orientation. Energy-dispersive X-ray spectroscopy (EDS) resolved our confusion. The cut had not landed on the GPU logic, but on the SRAM macro beside it. The unusual fin pattern was due to the SRAM library. We return to EDS in the process flow analysis behind the paywall. SRAM libraries are not like traditional logic libraries. Due to the unequal number of PMOS and NMOS transistors, they require specialized rules and layout libraries. They do not need the flexibility of logic libraries, so they are hyper-optimized for one purpose: dense, reliable memory. The SRAM cell we found is a 1:2:2-2:2 cell. This means there is 1 fin per pull-up (PU) PMOS transistor, and 2 fins per pull-down (PD) and pass-gate (PG) NMOS transistor. These 2 PU, 2 PD and 2 PG transistors would usually form a single 6T high-current cell (HCC). An 8T HCC adds a read-pull-down (RPD) and a read-pass-gate (RPG) NMOS transistor, each with two fins. We measured a cell height of 406 nm, which brings the bitcell size to 0.0463 µm². That is a theoretical peak density of 21.6 Mib/mm². We estimate that a 6T HCC would have a cell height of 292 nm and a size of 0.0337 µm². This is ~12% larger than a 6T HCC on Intel 3 and 4. We also estimate the 6T high-density cell (HDC) to have a cell height of 228 nm and a size of 0.0260 µm². This is coincidentally the same as the logic standard-cell height measured earlier. The estimate puts the cell near Samsung 7LPP/5LPP and slightly below TSMC N7/N6. That is a theoretical peak density of 38.5 Mib/mm². 6T HDC is arguably the most important cell as it is used for the largest caches in a chip, the L3 caches and system-level cache (SLC). Both the Kirin 9020 and 9030 have split the SLC into 4 banks to raise total SLC bandwidth. In the Kirin 9030, the SLC increased from 2 MiB to 3 MiB per bank. Correspondingly, the number of arrays within the bank also increased by 50%, from 16 to 24. Each array can store 128 KiB and forms an orderly pattern on the die shot. From the Kirin 9020 to the Kirin 9030, the area of a 128 KiB SLC array decreased from 0.0477 mm² to 0.0392 mm², an 18% shrink. The achieved density is 25.5 Mib/mm², 66% of the theoretical maximum. While the SLC was quite similar across both chips, the L3 has seen some major changes, particularly in terms of its layout. The total capacity also went up from 10 MiB to 12 MiB. Much like the SLC, the L3 is also split into 4 banks. In the Kirin 9020, an L3 bank consisted of 16× 128 KiB arrays and 16× 32 KiB arrays. However, an L3 bank in the Kirin 9030 instead consists of 48× 64 KiB arrays. In the Kirin 9020 L3, a 128 KiB array was 0.0513 mm² and a 32 KiB array was 0.0154 mm². The size of the 128 KiB array is different on the L3 and SLC as the assist circuitry for the two arrays differs depending on their purpose. In the Kirin 9030 L3, a 64 KiB array is 0.0210 mm². Although not a like-for-like comparison, normalized for capacity, it is 18% smaller than the 9020’s 128 KiB L3 array and 31% smaller than its 32 KiB L3 array. The achieved density is slightly lower than the SLC, at 23.8 Mib/mm², 62% of the theoretical maximum. Unlike the L3 and SLC, the prime cores’ private L2 cache uses a 2-bank design. As the prime cores’ L2 is latency-critical, it likely uses 6T HCC instead of 6T HDC. The 9020 has 16 arrays in each bank while the 9030 has 32. Each array has a capacity of 32 KiB. A 32 KiB array in the L2 shrank from 0.0171 mm² to 0.0142 mm², ~17% smaller. The density is 17.6 Mib/mm², ~59% of the theoretical maximum for 6T HCC. SRAM scaled well from N+2 to N+3, shrinking by ~19%, close to the theoretical logic shrink. The caveat is that N+2’s bitcells were unusually large, bigger than comparable 7 nm-class nodes, so part of the gain is catch-up rather than true scaling. With the insights from STEEL’s teardowns, we will be doing a deep dive into SRAM in a future newsletter article. Subscribe Everything above came out of a single STEEL teardown: die annotation, block-level area analysis and TEM cross-sections through logic and SRAM. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Future Roadmap The same cross-sections that pin down N+3 also show where SMIC can go next. Although N+3 is already close to the practical limits of DUV multi-patterning in several layers, SMIC still has a few scaling levers left. A theoretical N+4 would likely start with cell height. N+3 uses 5 M0 tracks between its power rails. Moving to 4 M0 tracks, as on SMIC N+2 and TSMC N6, could reduce cell height by roughly 15%. The routing grid is only one side of the shrink; the front end also must fit into the smaller cell. One possible FEOL lever is reducing the p-to-n isolation spacing from two diffusion grid units to one. Intel used this scaling booster on Intel 4, and TSMC did so on its N3 family. This path trades layout flexibility for density. Fewer M0 tracks reduce local routing resources, while tighter p-to-n spacing raises integration and design-rule difficulty. M2 is also constrained by the cell height shrink. For SMIC to maintain a ~5.7-track cell, M2 would need to move toward ~35 nm. That would move another layer into SAQP territory. SMIC could also reduce the CGP from 57 nm to 54 nm. Intel reached a similar CGP on Intel 10 nm/Intel 7 without EUV. The local interconnect is also tougher. If SMIC keeps the 3:2 M1-to-gate ratio, M1 would need to shrink to 36 nm and would likely require SAQP as well. If SMIC moves to a 1:1 ratio, M1 could relax to 54 nm, but it would give up routing flexibility. Under this theoretical path, we estimate that SMIC N+4 could reach a cell height of 198 nm and a CGP of 54 nm, implying a Bohr density of 137.8 MTr/mm², on par with TSMC N5 or Samsung SF4. However, the difficulty is cumulative. Each step is individually plausible, but together they make N+4 harder than the transition from N+2 to N+3. It will likely take longer, cost more, and carry less process margin. A theoretical N+5 would require a larger integration shift. One possible path is backside contacts (BSCon), moving power routing and source/drain contacts to the backside, which would reduce front-side routing pressure and enable another reduction in cell height. The front-side metal pitches could relax to reduce the process complexity. M0 would likely relax slightly to ~34 nm, and M2 and M4 pitches could relax further. CGP is unlikely to shrink much further. Even with EUV, 48 nm has been the practical limit for yield and process control. This approach would allow N+5’s cell height to fall to 170 nm and its CGP to 53 nm. This implies a Bohr density of 163.6 MTr/mm², on par with Intel 18A’s HP library. However, this would not make N+5 cost-competitive with the leading edge. It would reach a similar density through a much more expensive route. The integration difficulty rises sharply, with new process flows for backside alignment, wafer thinning, contact reveal, and backside metallization. Past this point, standard density and interconnect scaling become increasingly unattractive. That is where Huawei’s roadmap stops looking like a normal foundry roadmap and starts looking like a packaging roadmap. At ISCAS 2026, Huawei unveiled its tau (τ) scaling law, reframing process scaling in the time domain. τ is the time cost of data movement and processing: switching delays in transistors, RC signal propagation delays in circuits, compute, memory, and networking latency. Outside Huawei’s terminology, this is called system-technology co-optimization. This is Huawei’s answer to its lack of EUV lithography. Without EUV, planar density cannot keep pace with TSMC, Intel, or Samsung. If transistor density cannot shrink further, Huawei’s alternative is to shorten wires, reduce buffering, and stack logic vertically. “LogicFolding”, Huawei’s implementation of this new scaling idea, is, in practice, an aggressive 3D stacking approach. AMD V-Cache places SRAM above or below a CPU die. AMD’s MI350X places active interposer dies (AIDs) underneath accelerator and compute dies (XCDs), with the AIDs handling cache, IO interfaces, the network-on-chip (NoC) and embedded metal-insulator-metal (MIM) capacitors. With LogicFolding, parts of the same logic block are split across multiple active dies bonded face-to-face at ultra-fine pitch. This allows Huawei to shorten some critical paths and reduce buffer overhead, not merely add cache capacity or offload the IO and interconnect. Shortening wires is where the higher clocks come from. A large share of a modern core’s delay and energy budget goes into driving long interconnects and the repeater buffers along them. LogicFolding distributes a block’s critical-path gates across multiple stacked tiers bonded at a very fine pitch, so the bond interface behaves like an additional metal layer and the longest paths get shorter. That is how Huawei expects to recover frequency and efficiency it cannot get from the process alone. Huawei’s roadmap shows its intent. Prime core frequency is targeted to rise from 2.75 GHz in the Kirin 9030 to roughly 5 GHz by 2031, far beyond what planar scaling alone could deliver. Prime cores with 3.1 and 3.39 GHz clocks are being tested in its labs, although their power consumption is unknown. Beyond that, chips are in the design, simulation or pathfinding phase, meaning the frequencies are targets. However, the direction matters more: LogicFolding also helps with performance, not just density. The catch is that Huawei’s density claim is not directly comparable to foundry densities. A stacked design can report more transistors per package footprint by adding active layers, even if each patterned die remains well behind TSMC or Intel in front-end density. This is how Huawei can claim to reach foundry 14A-equivalent density by 2031. This is not a like-for-like foundry comparison, with Huawei using stacked logic and measuring density per package footprint. On a normalized Bohr-density basis, SMIC N+3 is ~114 MTr/mm², 38% less than Intel 18A’s HD library. Huawei’s 3D roadmap closes the gap by stacking active logic, reaching 215 MTr/mm² by 2030. In 2031, the roadmap density jumps to 295 MTr/mm², implying either a third active layer, partial EUV insertion or aggressive planar DUV scaling. Huawei’s methodology makes other foundries look much denser as well. Applying it to AMD’s MI450X with an N2 top die on an N3P base die yields a theoretical density of 460.2 MTr/mm² in 2026, compared with Huawei’s 295 MTr/mm² in 2031. This Kirin 9030 does not use LogicFolding, remaining in a conventional mobile SoC package. Instead, it forms the baseline for how far Huawei and SMIC can push planar scaling. Future teardowns of Kirin and Ascend chips will show both planar logic density and Huawei’s hybrid bonding solutions. Export controls changed China’s optimization problem rather than ending it. EUV restrictions raised the cost and complexity of leading-edge manufacturing without freezing it. SMIC reaches N6-class logic density through DUV immersion, SAQP and DTCO, while Huawei shifts more of the burden onto architecture, packaging and system-level integration. Future nodes will be tougher. N+3 still had room to tighten local metals and reduce cell height and CGP. Further scaling without EUV leaves fewer levers. More aggressive multi-patterning adds masks and overlay error. SMIC can keep pushing DUV, but each step will get more expensive and less forgiving. The design side is just as critical. Huawei had domestic EDA tools and flows before the Kirin 9030, with the Kirin 9000s, 9010 and 9020 making that clear. Huawei was able to ship multiple consumer SoCs on SMIC N+2 and N+3 while cut off from the Western EDA stack. US export controls restricted EDA tools for advanced chips in 2022 but did not target tools for more mature chips. In 2025, the US government briefly placed much broader restrictions on EDA software from Synopsys, Cadence, and others, before lifting them less than two months later as part of a trade deal tied to rare earths. Huawei has been unable to access those tools because it remains on a US trade blacklist. That forced Huawei, SMIC and Chinese academic institutions to build their own tools and flows. Researchers at Peking University recently announced a prototype EDA tool for Huawei’s LogicFolding architecture, which requires a new flow to handle the multilayer layout and floorplan. This is not the same as replacing the full Synopsys or Cadence stack, but it shows where domestic EDA is headed: toward tighter co-optimization between architecture, process and packaging. These advances are also diffusing into the Chinese ecosystem. SMIC is licensing its N+2 and N+3 processes to HLMC/Hua Hong at the government’s direction rather than by choice. If the same process learning feeds into Ascend accelerators for AI training and inference, the choke point shifts from one named fab to an ecosystem. Alibaba’s T-Head silicon arm and Cambricon, a Chinese AI chip designer that is expected to supply ByteDance, could also be major beneficiaries. Sanctions aimed at SMIC alone become less effective once the manufacturing knowledge has spread to other fabs and design houses. China is not closing the gap with Intel, Samsung and TSMC. The teardown shows the opposite in several places: no EUV, no backside power, higher process complexity, and visible trade-offs. But China is still advancing. If domestic chips become good enough for phones, inference, networking and security-sensitive workloads, they can matter strategically without matching TSMC at the leading edge. Behind the paywall, we show what else STEEL can do, with material and process flow analysis of SMIC N+3, and analysis of the Kirin 9030 package. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline, access the full Kirin 9030 and SMIC N+3 analysis or to commission a custom teardown, contact sales@semianalysis.com.
Good News: NBA player connects with family of 2 young brothers facing health battles
Los Angeles Lakers guard Marcus Smart shared a moment of connection on the court with two young brothers, Kenji and Kobe, after their family was surprised with a trip to a game earlier this season. NBC News' José Díaz-Balart has more on the special moment and what Marcus is doing to raise awareness for the need for more blood stem cell donors.
Rosie O'Donnell opens up about visiting daughter in prison: 'It was a big day for both of us'
Rosie O'Donnell shared a heartfelt post detailing a visit with her daughter Chelsea in prison: 'It was a big day for both of us.'
In Retrospect: Poland, Russia, Europe
In April I spent a few days with Zryw, a Polish non-profit organization that recruits young people to enter politics and public life. Their aim is to build a new generation of civic leaders in Poland. I’ve followed their evolution from the beginning; my son is one of the founders. (“Zryw” means “impulse” or “burst of speed” in Polish). Julie Chmielewska, one of Zryw’s leaders, interviewed me at the event. Here is the conversation, lightly edited for grammar and context: Julia Chmielewska: Assuming that culture shapes institutions, could we conclude that some cultures are more prone to authoritarianism? Anne Applebaum: I don’t think so. Every culture, every nation, and every country has the potential for change. When we look at history, we can see that nations do change. Poland has changed, for example, from the 1980s to today. There’s a completely different mentality here than the one I encountered when I first visited, in 1988. The current generation sees the world through a different frame. So no, I don’t believe that certain nations are doomed to authoritarianism, or to anything. Of course, there are political and cultural traditions, but they can always be challenged. JC: So do you think there’s something intrinsic in human nature that pushes people to democracy, freedom? AA: I think there is something in human nature, a deep instinct, that pushes people towards freedom, yes. People who live in authoritarian countries – and I’ve heard this from them over and over again – sooner or later find themselves angered by a feeling of helplessness. They can see the unfairness of crooked courts, irrational political decisions. They naturally dislike the fact that somebody has all the power while they have none. In those circumstances, people who have no political background at all sometimes are politicized just by that frustration. I’m thinking of Svetlana Tikhanovskaya, for example, who was a Belarusian housewife, until the circumstances of her husband’s arrest forced her to become a politician. I met a woman who is a Uyghur from China, and who had come to live in Turkey. After several of her family members were arrested, she too was propelled into a political role. These kinds of experiences make people interested in democracy or political reform, even if they thought they didn’t care. I also think that the opposite is true: some people instinctively prefer homogeneity, order, hierarchy. They don’t like the confrontation of opinions or the noise of debate, and they lean towards a single leader or a unified regime. I think that most of modern history is shaped by the clash between those two different sides of human nature. JC: Which force do you find more powerful today? AA: I think they both have a lot of power and there’s no way of predicting who wins. Even in countries that seem very shut off or stuck in an authoritarian system can change. We’ve seen that happen. And vice versa, I think democracies can also begin to fail and slide into authoritarianism. So it’s very important not to be complacent in either direction. JC: I want to go into your history and your experiences. You’ve lived in Russia during a time of incredible change in the late 80s, and then you came back to do research in post-Soviet Russia. AA: I was a student in Russia just before the collapse of the Soviet Union. I then traveled and worked there extensively in the 1990s, and I met people who really were full of hope. They hoped that Russia could become a democracy, or at least a place that guaranteed freedom of speech, freedom of the press. These weren’t ideas that came from Washington. Although now the narrative in the Kremlin is different, I met many people who were working towards exactly that kind of transformation. A friend of mine ran a series of seminars – once a year, and then later several times a year, in cities all over Russia – designed to get people to discuss politics in new ways. She invited young politicians and journalists, as well as foreigners. I went to many of them, in Moscow as well as Volgograd and Novosibirsk. Over two decades, hundreds of people came to these seminars, and all of them wanted Russia to be different. I remain convinced that many Russians still want Russia to be different. It’s just that the old system, in the form of Putin, a representative of that system, returned. The KGB reimposed their power. And this wasn’t because of something to do with culture, this was to do with money and politics, and who was in charge. JC: You’ve partially answered my question... I wanted to ask whether that excitement of the 1990s was an exception from the Russian historical norm which has been rather authoritarian? AA: Of course, if you look at the history of Russia since the 18th century, there have always been liberal groups, reformers and revolutionaries. There were the Decembrists, in the early 19th century, and the rural populists later on, who tried to organize the peasantry. A significant group of liberal Russians appeared at the turn of the 20th century, people like the father of the writer Vladimir Nabokov, who was a Russian politician before the revolution. These groups were small in number, but sometimes had a broader significance. The Russian dissident movement in the 1950s and 1960s actually invented the modern human rights movement. It was their idea to hold the leaders of the Soviet Union accountable for the language they used, to remind them of the treaties they had signed and the promised they had made. They created the Helsinki group, for example, that held Soviet leadership to the language of the Helsinki Treaty, which formally ended the Second World War and which contained guarantees of human rights, at least on paper. That idea spread to Eastern Europe, and similar tactics were used here in Poland. (Benjamin Nathans recently wrote a great book about the Soviet dissidents, To the Success of Our Hopeless Cause) JC: But seemingly, even if they do ever get power, they could never hold on to it. AA: We don’t know, because they have never really had power. But in any case, we also don’t know what will happen in the future. There is no reason to assume that Russia will forever be condemned to totalitarianism. Even during the first fifteen years of Putin’s regime there was some form of democratic politics. Only when the full-scale war began did he bring everything to an end: he shut down all remaining independent organizations and killed his most important opponent, Alexi Navalny. But does that mean he is popular, that he enjoys legitimacy? Even now, we don’t really know what Russians think about him, or about the war. There is no way of doing real polling in Russia because nobody will answer an independent pollster over the phone. JC: Do you think that the flock of young people, especially young men, who fled Russia after the start of the war represent a continuation of liberal movements that refuse to partake in the authoritarian state, or do you think they are moving for the sake of self-preservation – “I don’t want to go to the army, so I leave”? AA: I’m sure it’s both. I actually know many people who left Russia for political reasons either in the very last years before the war, or else just after the war began. JC: And do you see a change in the young generation versus the old one that have fled? AA: It’s hard for me to say because the people who I know were mostly already politicized. I do know some younger people who left, but most of them were already either active in the opposition, or working as journalists. Many of them very self-consciously think of themselves as maintaining Russian culture abroad, just as in the 20th century the Soviet dissidents or the anti-communist White Russians once thought of themselves as people who maintained the true Russian culture, outside of Bolshevik Russia. JC: Let’s move on to Poland. One of your first experiences with Poland was reporting on Margaret Thatcher’s first state visit, in the autumn of 1988. You followed her around the farmers’ market. AA: She was making a symbolic gesture. She wanted to welcome free markets, but the only one she could really visit was the farmers’ market at Hala Mirowska. JC: And I want to talk about this area because today you can look out of any window in that district, Mirów, and see rows and rows of skyscrapers. How does it feel to see a country built from the ground in such a short time, both politically and economically? AA: You know, when you’re living in a period of dramatic change, it’s always hard to know whether the change is positive or negative. The transformation in Poland created winners and losers, as well as new classes of people, new political movements of different kinds. At the time, it sometimes just felt like turbulence. Now, we can look back at the 1990s and early 2000s in Poland and see in retrospect that the country was headed in towards prosperity and European integration. In around 2009 or 2010, I remember speaking to a woman who worked cleaning government offices, and who asked me if her daughter should study in Amsterdam or in London. This seemed to me to be a real transformation, and it happened very fast: within a few years, Poles stopped feeling like second-class Europeans, and a generation of younger Poles appeared who had no qualms about crossing borders. JC: We again live in turbulent times. Do you think we’re heading towards positive outcomes? AA: I can’t make predictions, because everything that happens tomorrow depends on what people do today. Also, history doesn’t have a trajectory. It doesn’t move in a particular direction. You only think it does afterwards. As I said, you can look afterwards at Poland in the 1990s and you could say this was a period of great progress. But not everybody at the time saw that. Sometimes people are very wrong about a given country’s trajectory. I remember people writing about Ukraine in the 1990s, about how dangerous it was that Ukraine was independent, that this was going to be an anti-semitic state, that Ukrainian nationalism was going to come back... and although you can say many bad things about Ukraine, the country made many bad choices, actually it became a pretty tolerant state which now has a Jewish president and until recently a Muslim defense minister. JC: In the 1990s Poland’s and Ukraine’s GDP were roughly similar. Ukraine was even a bit richer. So the starting point was similar for both of these countries, but they’ve turned out very, very differently. Even if we stop in 2014. Why do you think Ukraine “chose East”? Was it external influence? AA: No, I think Ukraine was in a different position. First of all, central and eastern Ukraine had been part of the Soviet Union since the 1920s, and had therefore experienced a longer period of occupation, repression, Sovietization and even Russification. Ukraine did not have, as Poland did, an alternative elite: a large cadre of economists and politicians, who already had some experience in opposition politics and in independent thinking. In Poland, the transformative finance minister, Leszek Balcerowicz, had already thought about how an economy might be decentralized before he took office. We can argue about how successful he was, but at least he was prepared to try something new. In Ukraine, people weren’t prepared. For one, there hadn’t been much space even for an illegal opposition in the previous couple of decades. Ukraine was also in many ways still emerging from colonial occupation. For the previous couple of centuries, many of the most capable Ukrainians had moved to Russia, and the first generation of leaders in independent Ukraine tended to be former Soviet apparatchiks. They didn’t immediately seek to become closer to western Europe. Instead, they looked for some kind of economic and political “third way” and an accomodation with Russia. Ukraine became stuck in this position, half-in, half-out and became pretty profoundly corrupt. JC: The Polish alternative elite had a vision of where they wanted the country to go. I think the general perception now is that this vision ends with the next election, right? Is this a natural process of gaining power? AA: Their vision, and it was shared by the time by politicians who now call themselves both left and right, was that Poland should join the EU and NATO, as fast as possible. My husband (Radek Sikorski) was in the very first government that said it wanted to join NATO. At the time this was taken very badly in Washington: the demand for NATO membership absolutely came from Poland, not from the US. But even then, in the early 1990s, many Poles already understood that the Russian sphere of influence would grow once again, that it was important to become part of the transatlantic alliance and an integrated Europe as fast as possible: NATO, the EU, the Council of Europe, all of the trading and security alliances. That consensus lasted through several different governments and over many years, even governments containing former communists. For twenty years, right, left and center disagreed about many things, but they all agreed on the direction that the country should go. In retrospect, that consensus created the basis for prosperity in Poland. JC: And regarding the Polish-Ukrainian relations. We know that antagonisms, e.g. the myth of Wołyń [a massacre of Poles that took place in what is now Western Ukraine, in 1943] are increasingly used in Polish political discourse today. In Ukraine, nationalist historians make heroes out of UPA, the Ukrainian revolutionary army, which is held responsible for this tragedy. Where do you see a start for burying the hatchet? Is the reconciliation of our nations possible? AA: So here’s a strange thing: For more than a decade after they both gained independence, Poland and Ukraine participated in a number of projects that were designed to solve exactly these kinds of Polish-Ukrainian differences. Books were published that were jointly written by Polish and Ukrainian historians, monuments were built. These projects were successful: If you’d asked me this question in 2010, I would have said that there are no real historical issues between Poland and Ukraine, that the two countries had mostly reconciled. For a number of reasons, this began to shift. In Poland, children and grandchildren of victims of the Wołyń massacre felt their tragedy hadn’t been fully recognized. In Ukraine, nationalist groups wanted the UPA partisans who had fought against the Soviet Union recognized for their heroism, despite the fact that some in this broad and not well-defined group were also linked to Wołyń. In both eastern Poland and western Ukraine, the memory of the ethnic cleansing that took place there in the late 1940s - Poles were moved West, Ukrainians East - to accomodate new borders has left feelings of displacement and bitterness. The wave of Ukrainian immigration, which started before the war, may have provoked some of this. But don’t underestimate the role played by Russia, which has always wanted to create discord between Poland and Ukraine, and pumps out propaganda to that effect in both countries. Vandalism on both sides of the border, damage done to cemeteries and monuments, is sometimes carried out by provacateurs working for Russia, just to create bad feelings. The Polish-Ukrainian conflict also hides a different reality: although there are real grievances and bad memories, the truth is that the biggest tragedies both nations experienced in the twentieth century were inflicted by the Soviet Union and Nazi Germany. That should unite these two countries, not divide them. JC: This week (19.04.2026 – Ed.) in Hungary we saw that using historical narratives to create grievance has no longer worked. Are you optimistic about the direction after Orban’s loss? AA: The Hungarian election was really important because it shows that people can actually resist powerful, dominant propaganda. The ruling party Fidesz controlled all of the TV, 90% of the newspapers, the constitutional court, the bureaucracy... and yet people had the nerve to vote against it and resist it. It’s also an important election because Hungary created a huge network of well-funded think tanks and foundations that were funding other far right groups and projects. So that loss is going to have a knock-on effect in other places too, maybe even in Poland. JC: What you’ve said about resisting propaganda reminds me of one of the interviews you did about talking to Russians in the post-Soviet era who claimed that people knew that the system was lying. Why do people choose to believe in these regimes anyway? AA: Because it’s useful. Stephen Kotkin, an American historian, once described how people would learn how to “speak Bolshevik”: It was just a language that you needed to use in order to get by in society. If you didn’t talk the way the regime wanted you to talk, then you might have problems, or lose your job, or your kids would not get into university. It was a way of getting along. Communist Poland was similar, at least in the early years. When I was writing a book about the Sovietization of Eastern Europe after World War II, I met a lot of people who wanted to talk a lot about the war, when many of them had done really heroic things. But almost nobody wanted to talk about the decade afterwards, between 1945 and 1956. This was when you had the short period of terror, violence and Polish Stalinism. To stay safe, people felt the need to just go along with what others were saying, or stay out of politics, or use communist jargon without necessarily believing it. I don’t judge them for it, and I wouldn’t describe all of those people as collaborators. It’s easy to feel moral certainty in retrospect, because we know that communism ended. But if you were living in 1949, it might not have been clear to you that communism was going to end. In very repressive societies, maybe about 10% of people who are really evil – collaborators, torturers. Maybe 10% of people are really brave and who find ways to resist. And then around 80% of people have kids, they have parents, they have to have jobs and they’ve had to get through it somehow. Strange though it may sound, I’ve found that the work I did on that book is now very useful in explaining some of what’s going on in the United States today. There are plenty of members of the Republican Party in Congress who know perfectly well that Donald Trump says many things that aren’t true. But they avoid criticizing him because it’s inconvenient, because they would get in trouble, because someone would attack them on the internet. So actually you don’t even need mass terror to get people to conform. JC: Is Gen Z reinventing agency? AA: We’ll see. In any generation you can find groups of people who want agency. If you live in a society that’s unfair, for example where a tiny number of people have captured most of the wealth, then at a certain point people rebel. This is always easier for younger people, who have you have less to lose. The question now is how the internet will affect the relationships between citizens and the state, and how it will change organizations. The “Twitter revolutions” people spoke about as early as 2008-9, mass protests organized online, have often proved to be very superficial. Although you can easily join something just by clicking, the work of creating a real movement requires physical participation. Successful mass movements of the past, for example the Civil Rights movement in the United States, were built by people who had spent many years together. They had participated in non-violent workshops together. They practiced and prepared. Just using the you can get everybody to show up at a certain moment, but then when the protest is broken up, nothing happens. It’s also true that the repressive regimes have more recently learned how to use the internet to undermine leaders and movements. Most of all, they now understand how to make people cynical. The form of propaganda that most modern authoritarians use - and I think the Russians really pioneered this - deploys sneering cynicism. Instead of praising the rulers, the regime propagandists mock the opposition movement leadership for being supposedly corrupt or sexually degenerate, with the goal of undermining any kind of idealism. JC: MAGA grew on the internet? AA: MAGA is a real grassroots movement. They had symbols, red hats, they showed up at rallies. But you’re right that the cynicism, the sarcasm and the distrust that the movement embodies came originally from the internet, and this is different. Fifty years ago, most European political parties had a social base in real organizations, in trade unions for Social Democrats, in church groups for Christian Democrats. As people stopped going to church and as the trade unions became smaller, the social base of these parties disappeared. Now people who wouldn’t have known one another in the past meet on the internet and create new movements, many of which don’t last. JC: Is history ending? Going in stale circles? AA: History never ends. In truth, human beings want contradictory things at the same time: order and freedom, stability and change. These things are never resolved, and when a society swings too far in one direction, people always push it the other way. But each time that happens, the result is different. Certainly it is true that we are now in a period when old philosophers and ideas from the 1930s are undergoing a revival. Carl Schmitt, who was a philosopher who was very influential on the Nazis, is back as an influence on both the far left and the far right, once again inspiring people to think that all politics has to be existential, that all politics is about defining and defeating enemies. In the US, some are also bringing back dominionism, the idea that we need a Christian and not a secular state. It’s also true that we are living through a more fundamental shift. The old left-right divide, which was mostly about the size of the state, is much less important now. Instead, we are arguing about more fundamental things: what are our rights, what protects our freedom. Or how much power do we want to give small elites, versus how much power to give ordinary people. In America a small group of very wealthy people now control information, because they control the social media platforms and AI, which means they determine what people will read and learn. Finding a way to preserve preserve zones of autonomy and independent thinking, this is going to be the main task for the next generation. JC: What is the one book that a person interested in Central Europe should read? AA: You could read my book “Iron Curtain: the Crushing of Eastern Europe” which tells the story of how the Soviet Union imposed its culture on the region. Or read Tim Snyder’s history of the region, “The Reconstruction of Nations: Poland, Ukraine, Lithuania, Belarus 1569-1999.” And everyone should read “The Captive Mind” by Czesław Miłosz, which describes exactly the phenomenon we were talking about: why do people collaborate? I joined Scott Galloway and the brilliant Fiona Hill in a discussion about the wars in Ukraine and Iran, the future of global power, and what these conflicts reveal about America's role in the world. Scott told us that this was the 400th edition of his podcast, which is quite a number: My friend Francesco Chiamulera runs a brilliant series of literary events, Una Colline di Libri, A Hill of Books, in the Prosecco Hills, a region of vineyards and elegant hill towns in the Veneto, north of Venice. We did an event in Vittorio Veneto and also drove and biked around the countryside. Buy Autocracy Inc Buy Iron Curtain Open Letters, from Anne Applebaum is a reader-supported publication. To receive new posts and support my work, consider becoming a free or paid subscriber. Subscribe
What Genres and Streamers Won 2025? And Who Lost? Plus Six Strategy Thoughts
(Welcome to the Entertainment Strategy Guy, a newsletter on the entertainment industry and business strategy. I write a weekly Streaming Ratings Report and a bi-weekly strategy column, along with occasional deep dives into other topics, like today’s article. Please subscribe.) Okay, time for the tenth and final article in my ten-part series recapping 2025. As I wrote two articles ago, my barometer for whether these articles are worth writing/publishing is whether they yield strategic insights, and once again, every subsection in this article has a strategic takeaway (or two). Honestly, these are the most important takeaways, since I step back and look holistically at the streaming wars in 2025. After I declare which streamers won and lost the year and which genres won and lost the year, I have six bonus thoughts. If you’d like to review the whole series... You can find the film flops here and here. You can find the TV shows flops here and here. You can find the top films here. You can find the top TV shows here, here and here. Then I declared my winners and losers in various categories here. You can find my 2024 recaps here. You can find the 2023 recaps here and here. And my 2022, 2021 and 2020 are all stored here. Yeah, it’s halfway through the year, and I’m just finishing this series up now. This year, I tried to space things out to not clog up my writing calendar, plus I had to wait for Fallout to (finally) drop off the charts. Well, that ended up pushing this series wayyyyy too far back on the calendar. Oh well. Next year, the goal will be to finish this series in March, but frankly, I just need more staff to make that happen. So please subscribe. Or, if you’re an advertiser (movie studio, FYC firm, or other), please reach out. Subscribe Streamer of the Year: Netflix Honorable Mention: Paramount (and CBS) So, just last week, I wrote about how Netflix has lost seven of its top twelve scripted shows in the last year. And I shared two very dour looks at Netflix’s potential slowdown this year and last. Guess what? They’re still the number one streamer in America. In 2025, they dominated new streaming shows (even if most of those new hit shows aren’t coming back for future seasons), they had the two biggest films, and they had the top returning TV show by a mile. The world is complicated, nuanced and messy. There may be warning signs of a future Netflix slowdown, but in 2025, Netflix was still the number one streamer. Note what I didn’t say? That Netflix has “won” the streaming wars, because obviously the streaming wars are still ongoing and, more importantly, YouTube is still growing—so now YouTube has “won” the streaming wars?—while Netflix’s share of TV consumption has stalled out. Avoid simplistic talking points, especially if they’re constantly repeated and could fit on a bumper sticker. I had trouble picking the second-place streamer this year, because all of the candidates for second place—Prime Video, HBO Max, and Paramount+—had some hits, but no one stood out. Then I saw this update from Nielsen on the top shows on TV in the 2025-206 season. Sure enough, Netflix had five of the top ten shows! And they had ten of the top 31 shows and fifteen of the top fifty. But CBS/Paramount+ actually had more shows in the top thirty and the top fifty. Paramount+/CBS had twelve of the top thirty shows and nineteen of the top fifty. Let me emphasize that: CBS/Paramount+ had more top shows in the 2025-2026 season than Netflix. And this look was just for TV shows, not live sports, an arena Netflix barely plays in. Meanwhile, Paramount-Skydance’s market cap is a fraction of Netflix’s. That’s weird, right? Streaming Loser of the Year, TV… We’re just getting started with this issue, but the rest is for paid subscribers of the Entertainment Strategy Guy, so if you’d like to find out… ...what streamer lost the year in TV... …whether Netflix could win the title for “film” streamer too… …who won the Disney vs Warner Bros. battle for theaters… ...what TV genres won and lost the year... ...what film genres won and lost the year... ...what film genre people think is thriving on streaming but isn’t… …why F-BOSSS TV shows don’t hold the same sway in the 2020s… …what it means to “flop” as a film on streaming… …UK shows underperforming on streaming… And a lot more... ...please subscribe! We can only keep doing this great work with your support. If you’d like to read more about why you should subscribe, please read this article about the Streaming Ratings Report, why it matters, why you need it, and why we cover streaming ratings best.
20 Nations Strengthen Regional Crisis Response at Indo-Pacific Health Security Summit in Malaysia
Military, civilian, and non-governmental leaders from 20 countries gathered in Kuala Lumpur, Malaysia, June 7–8, 2026, for the 3rd Summit of the Indo-Pacific Health Alliance for Security (IPhas). Hosted by the Malaysian Armed Forces ahead of the Global Health Security Conference (GHSC), the summit strengthened regional collaboration and advanced shared approaches to health security under the theme, “Civil-Military Collaboration for Whole-of-Society Resilience.”
Key factor behind Jaguars' strong special teams play
ST coordinator Heath Farwell shared a key factor behind the success of the Jaguars' special teams unit.
Colts rookie garnering attention in minicamp, 'operating like a vet'
Cam Bynum shared his initial impressions of Colts' rookie safety AJ Haulcy following minicamp.
Ancient DNA shared with Neanderthals may explain human language
A tiny set of ancient genetic “switches” may have played a surprisingly large role in making human language possible. Researchers found that these DNA regions, which act like volume controls for genes involved in brain development, have an outsized influence on language ability despite making up less than 0.1% of the genome.
Pokémon Go Data Wasn’t Shared With Drone Company, Niantic Spatial Says
The company says it no longer receives data from the monster-catching app after Niantic was acquired by Scopely
This Is the Dangerous Trap Making Businesses Bland, Forgettable and Easy to Ignore
Here's how years of shared best practices, optimization and AI-driven efficiency have made differentiation and loyalty harder to sustain.
Kustom Entertainment, Inc. and Gilley’s Gambling Hall Park City Conclude Press Conference Announcing New Live Event Plans
Kustom plans 20+ show dates at Gilley’s, with the first event planned for Fall 2026 Park City, Kan., June 11, 2026 (GLOBE NEWSWIRE) -- Kustom Entertainment, Inc. (Nasdaq: KUST), (Stan Ross, CEO) and Gilley’s Gambling Hall Park City, KS (Phil Ruffin, Owner) have concluded a press conference at Gilley’s, where leaders shared new details on plans to bring more live music, festivals, and large-scale entertainment events to Park City and the Wichita, Kansas area. Kustom Entertainment, Inc. (the “Comp
Social Security is Facing a Political Crisis
On Tuesday the Social Security Trustees released their latest report on the system’s finances. The numbers didn’t change much: Unless something is done, the Old Age Survivors and Disability Insurance (OASDI) program, Social Security’s official name, will be unable to pay full benefits starting in either 2032 or 2034, depending on some technical issues. That’s not far away: If the Trustees are right, the prospect of a Social Security crisis will loom over the next presidential administration. It’s important to understand, however, the nature of the looming crisis. It won’t be an economic crisis. It won’t even be a serious fiscal crisis. Whatever you may have heard, Social Security isn’t in danger of going bankrupt. What we’re facing, instead, is potential political crisis. Congress and the White House could easily take action to sustain America’s retirement system. But given the current state of our politics, there’s no guarantee that they will. There is a widespread misunderstanding of how Social Security works. While Social Security was designed to look like a pension fund, it isn’t. A pension fund pays benefits out of a stock of assets it has accumulated over time. In contrast, Social Security operates as a government transfer program, like food stamps or Medicaid. Now, unlike food stamps — but like the highway trust fund — Social Security is on paper supported by a dedicated tax, the payroll tax, that is assigned to that program. But I say “on paper” because from an economic point of view assigning the payroll tax to Social Security is just an accounting convention. What matters for the U.S. economy is the overall balance between government spending and government revenue, not the difference between one type of spending and one source of revenue. So there’s no inherent economic significance to the fact that by 2034 payroll tax receipts will be insufficient to cover promised benefits. There is, however, a legislative issue. As long as the Social Security Administration can pay benefits out of payroll taxes and its cash reserve, there’s no need for Congress to vote each year to authorize benefits — they just keep going out until further notice. However, once those resources become insufficient, benefits will fall —by 17 percent according to the Trustees — unless Congress passes new legislation that “tops up” Social Security’s finances. Yet the current administration and Republican party are such extremists that there is a real risk that Social Security will be held hostage on behalf of their goals. If this should come to pass, the hostage-takers will claim that shoring up Social Security is unaffordable. Right on cue, Mike Johnson, the Trump-sycophant Speaker of the House, declared on Monday that “entitlement programs” like Social Security “have to be adjusted and fixed,” and that Republicans will introduce a plan to that effect next year. But this is a ploy, because while the cost of maintaining Social Security benefits at their promised level isn’t trivial, it is in fact affordable. According to the Trustees’ report, the actuarial balance of OASDI up through 2050 — the amount of additional funds it would need to keep paying full benefits for the next 25 years — is 1.06 percent of GDP. To put that number in perspective, the Trump administration proposes increasing military spending next year by $420 billion, equivalent to about 1.4 percent of GDP – without any discussion of whether that’s affordable Yet how did we get to the point where Social Security will need to be topped up? The main answer is that we have an aging population, with a growing ratio of retirees collecting benefits to workers paying into the system: Trump’s anti-immigration policies are making this problem worse. According to the Trustees’ report, lower immigration will deepen Social Security’s financial hole because many immigrants are working-age adults who will pay into the system for decades before they collect benefits. In fact, this problem may be much bigger than the report acknowledges: The report’s baseline assumption is that we’ll have net immigration of almost 1.2 million people a year, and even the pessimistic case assumes 750,000 a year. Meanwhile actual net immigration has already been cut far below that — and may now be negative. Moreover, Social Security is being financially damaged by growing income inequality in America. Payroll taxes are levied only on wages up to $184,500, and they don’t touch capital income. With the distribution of income increasingly shifting from labor to capital, as well as becoming more unequal among wage-earners, revenue from the Social Security payroll tax has been falling as a share of national income. From 1990 to 2024, it fell from 5.02 percent of gross domestic income to 4.46 percent. Which brings me to the question that, these days, we ask about everything: How might Social Security be affected by the advent of AI? A short answer: If, as many of us fear, AI accelerates rising income inequality, it will further reduce the payroll tax receipts that currently pay for Social Security and further endanger its finances. On the other hand, if AI, as its advocates promise, leads to faster economic growth, it will increase the potential tax base that could and should be used to support Social Security and other social insurance programs. But to take advantage of that larger base, we’ll have to get serious about taxing wealth and capital income. Is Social Security in trouble? Yes, but only because of the way its financing is currently structured — a structure that no longer works well because our society and economy have become so unequal. Moreover, Trump’s immigration policies are further endangering its already deteriorating financial condition. So don’t believe Republicans’ gaslighting that it will be necessary to cut Social Security benefits. All that is necessary to preserve Social Security is political will to raise taxes on the wealthy and a sensible immigration policy. MUSICAL CODA Actually 67 under current law.
What Sean McVay looks for when Rams’ schedule is released
Sean McVay shared what he looks for first when his team’s schedule is revealed
Kenan Thompson explains how sharing an office with Colin Jost for 8 years led to a classic 'SNL' sketch
'Saturday Night Live' star Kenan Thompson explained how a famous sketch came about because he shared an office with Colin Jost. They were 'office mates for like eight years.'
WHO urges targeted action to strengthen emergency workforce capacities for shared health risks across the Asia-Pacific region
At a time when the world is more interconnected than ever, the World Health Organization (WHO) is disseminating a comprehensive regional analysis of shared health risks across Asia and the Pacific, urging Member States to invest in enhancing workforce capacities regionwide to mitigate these risks and ensure health systems are better prepared to anticipate, tackle and withstand a range of crises and shocks. Over 100 delegates from 49 countries and areas in the Asia-Pacific region reviewed results from the regional risk analysis during the WHO-led Asia Pacific Health Security Action Framework (APHSAF) Stakeholders Meeting in Malaysia. Synthesizing insights from 21 strategic risk assessments and more than 800 multisectoral experts, the regional analysis highlighted an urgent imperative: countries must proactively invest in emergency workforce preparedness to navigate a landscape where climate hazards, disease outbreaks and geophysical events increasingly overlap. These complex converging crises create devastating, compounding impacts on health systems and communities – reiterating the need for investing in a fit-for-purpose regional health workforce and multisectoral action.Key findings: an evolving risk landscape More than half of the participating countries ranked flooding, cyclones, dengue and pandemic-potential respiratory pathogens as being of high or very high risk, while antimicrobial resistance, landslides and gastroenteritis remain widespread concerns as well. “Given that 51% – over half – of these assessed hazards are deeply interconnected, isolated health interventions are no longer sufficient,” said Dr Saia Ma’u Piukala, WHO Regional Director for the Western Pacific. “Extreme weather events like cyclones and floods directly trigger subsequent disease outbreaks, while environmental degradation – driven by sea-level rise, coastal erosion and saltwater intrusion – fuels health risks across the Pacific. Mitigating these cascading risks requires unified, cross-sectoral action linking environmental, agricultural and public health policies to build true regional resilience.” Priority recommendations for action To address critical vulnerabilities, WHO calls on Member States in the Asia-Pacific region to urgently prioritize the following strategic actions: Bridge workforce capacity gaps. Embed and standardize emergency preparedness within academia to promote regional workforce interoperability. Foster multisectoral coordination. Address ad-hoc taskforce responses and fragmented surge support through formalized contingency plans and standard operating procedures that are frequently updated and tested. Secure sustainable financing for emergencies. Overcome systemic barriers to access dedicated funding for both immediate anticipatory actions and long-term emergency preparedness initiatives. Enable emergency-ready primary health care. Embed emergency management into public health workforce readiness planning. Ensure that emergency planning is inclusive. Establish clear pathways for inclusive emergency planning that actively involves communities most at risk and other vulnerable groups. Optimize communication. Update risk communication and community engagement strategies, aligning them with seasonal risk calendars. Elevating workforce readiness to meet regional health risks While the gaps identified are significant, the Asia-Pacific region possesses solid foundational pillars, including dedicated clinicians, laboratory staff, rapid response teams, emergency medical teams and extensive community networks. However, to adequately address the compounding nature of modern crises, the various components of the emergency workforce must collaborate cohesively. True resilience depends entirely on transforming this currently fragmented workforce into a highly trained, interconnected and rapidly deployable asset. To achieve this, WHO is actively advancing regional workforce capacities through the Global Health Emergency Corps initiative. This initiative – supported by the Gates Foundation and the Institute of Philanthropy – seeks to build a seamless network of emergency workforce across borders and sectors, ensuring that when a crisis strikes, a standardized, well-coordinated and trained workforce is immediately ready to respond. “Scaling up emergency workforce readiness is no longer optional,” said Dr Gina Samaan, Regional Emergency Director for WHO in the Western Pacific. “It is the definitive factor that will determine how effectively the Asia-Pacific region safeguards health and protects lives in an increasingly unpredictable future.” ____________________For more information, or to arrange media interviews, contact: Ara Johannes, WHO Western Pacific Health Emergencies Division: johannesa@who.int WHO Western Pacific Communications: wprocom@who.int
Apple Shares Massive List of Over 250 Changes Across iOS 27, macOS Golden Gate, and More
During its WWDC 2026 keynote on Monday, Apple briefly showed a slide with hundreds of new features and enhancements coming across iOS 27, macOS 27 Golden Gate, watchOS 27, tvOS 27, and visionOS 27. All of the software updates are currently available as developer betas, and they are expected to be released to all users in September. We already highlighted some of the key new features from the slide, and now we have shared a categorized list of all of the more than 250 changes shown.
The UN’s AI Panel Could Shape Global Governance. Can It Balance Science and Politics?
The United Nations’ new Scientific Panel on AI could give governments a shared evidentiary basis for policymaking—but only if it can balance independence, expertise, and political legitimacy.
The UN’s AI Panel Could Shape Global Governance. Can It Balance Science and Politics?
The United Nations’ new Scientific Panel on AI could give governments a shared evidentiary basis for policymaking—but only if it can balance independence, expertise, and political legitimacy.
Celebrating a shared cosmos and advancing Black equity in space science
Black in Astro, co-led by an astronomy postdoc at UC Santa Cruz, welcomes all to join the grassroots organization’s virtual conference to find inspiration and connection in a vibrant global community
World’s leading soil science congress opens in Nanjing for the first time in China
The 23rd World Congress of Soil Science, often regarded as the “Olympics” of the soil science community, opened in Nanjing, Jiangsu Province. Held from June 8 to 12 under the theme “Soil and the Shared Future of Humankind,” the congress marks the first time in its nearly 100-year history that this premier global academic event in soil science has been hosted in China.
Trump invokes ‘The West Wing’ in apparent justification of latest Iran strikes
Trump shared a clip from an episode in which the fictional president, played by actor Martin Sheen, dismisses the idea of a “proportional response” following the downing of a U.S. aircraft.
Family of teen injured at Butte carnival shares health update
Butte-Silver Bow Sheriff Ed Lester shared a statement Tuesday morning on behalf of the family of the teen injured at the carnival in Butte on Sunday.The family
A majority of voters who changed their political party switched to Republican
Twelve of 23 counties shared data on voter party registration after this year's deadline.
Kenneth Walker shares epic hype video before Chiefs' mandatory OTAs
Take a look at this epic hype video, which was shared on social media by Chiefs RB Kenneth Walker III ahead of Kansas City's mandatory OTAs.
iOS 27 Tidbits: Share a Phone Number on Two iPhones, Independent Alarm Volume, Faster AirPlay and More
At the WWDC 2026 keynote, Apple detailed iOS 27 changes like a new version of Siri with a dedicated Siri app and Apple Intelligence features across multiple apps, but there are dozens of smaller but still important changes that Apple didn't have time to go through. Apple shared an image summarizing some of the bug fixes and optimizations it made in iOS 27, iPadOS 27, and macOS 27, and there are some interesting changes.