SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " solution " 1,693 found 🔀 AI-powered Shuffle
Howard Hahn Helps Establish Global Health Nonprofit Following International Funding Reductions | News and Publications
Kutak Rock attorney Howard Hahn recently spearheaded the formation of The GOARN Fund, Inc. (&ld...
The 4 GOP senators who broke ranks and voted to block Trump from resuming Iran war
The president seethed at Susan Collins, Bill Cassidy, Lisa Murkowski and Rand Paul after the war powers resolution passed, saying: "I will get it done, one way or the other."
Why the tech industry wants to take away your screen
Some tech leaders have a vision for a world where you spend a lot less time looking at your phone. Is it the solution to screen time, or just a new dystopia?
DC Wrap: Senate OKs war powers resolution; Iran contradicts U.S. on inspections
A look at the day's biggest stories in national politics
DC Wrap: Senate OKs war powers resolution; Iran contradicts U.S. on inspections
A look at the day's biggest stories in national politics
Senate votes to block Trump from resuming Iran war
The Senate passed the first war powers resolution since the start of the Iran conflict, but Republicans argue it does not have the force of law.
Senate votes to limit Trump’s Iran war powers in rare rebuke
The Senate adopted a resolution on Tuesday directing the president to remove military forces from the conflict with Iran, a significant rebuke to Donald Trump and a strong message that the war lacks support in Congress.
Vanderbilt Health is first US site for advanced clinical testing platform
Part of the cobas pro integrated solutions produced by Roche, the platform will speed up laboratory testing and improve patient care.
Senate again set to vote on war powers resolution to halt Iran conflict
For the 10th time, the Senate will vote on a war powers resolution to block U.S. military action against Iran.
Sonic Frontiers on Nintendo Switch 2 has quality and performance modes, Switch 1 save transfers, no upgrade path
We have a few more details about Sonic Frontiers: Definitive Edition, which was just announced and released for Nintendo Switch 2. First up, SEGA has confirmed the two different graphical modes are included. It’s possible to either go for performance or resolution. Performance means a higher frame rate, but the resolution will drop to compensate. SEGA didn’t go into specifics...
Something in space may be changing alien signals before they can reach Earth. Scientists have a solution.
New research suggests that alien radio signals may be transformed by plasma from their home stars — and scientists on Earth could be overlooking prime evidence of alien intelligence.
Sportico Studio’s New Video Experience Debuts at Cannes Lions
Sportico this week launched Sportico Studio, a dedicated content and creative solutions offering for brands looking to engage the sports business community. The studio, featured on a new video page on Sportico’s homepage, will leverage Sportico‘s unique position at the center of the sports business ecosystem, connecting brands with influential decision-makers across leagues, teams, media, …
These 3 Kenvue brands target common skin problems through science
Neutrogena®, Aveeno® and Lubriderm® each offer science-backed solutions to common skin issues.
Hallmark Health Care Solutions launches AI solution to tackle workforce ‘black box’
Hallmark Health Care Solutions built an artificial intelligence-enabled platform to give health systems more visibility and control of workforce cost, capacity and incentives. | Health systems partnering with Hallmark have seen significant measurable results, including reducing contingent labor expenses by 15% to 25% and lowering overtime costs by an average of 25%.
IC360 and BIG EAST Conference Expand Integrity and Compliance Partnership
NEW YORK – The BIG EAST Conference and Integrity Compliance 360 (IC360), the global technology and advisory platform for integrity and regulatory solutions in sports, sports betting, iGaming, and prediction markets, are proud to build on their comprehensive partnership.
Samsung’s UFS 5.0 Doubles Read Speeds To 10.8 GB/s, And Qualcomm’s Snapdragon 8 Elite Gen 6 Has Already Locked In Support
Samsung's UFS 5.0 storage solution offers read and write speeds that are over twice as fast as those of the previous UFS 4.1 standard.
Watch Novonesis on Business Strategy
Ester Baiget, CEO of Danish biosolutions company Novonesis, discusses the firm's China business and growth strategy. She speaks with Minmin Low from the sidelines of the World Economic Forum's Annual Meeting of the New Champions in Dalian.
Samsung Unveils Industry’s Fastest UFS 5.0 Solution for Next-Gen On-Device AI Applications
Samsung’s UFS 5.0 solution achieves the industry's highest data transfer speed of 10.8GB/s, enabling faster storage and processing in mobile memory Enhanced power efficiency and smaller package to provide optimal mobile AI experiences
Baystate Health to enhance care with Oracle Health’s AI solutions
Baystate Health and Oracle Health are expanding their collaboration to launch an enterprise digital transformation, aiming to create a more connected and patient-centered care experience using AI-p…
T-Beeney Solutions is this week's Aces of Trade
T-Beeney Solutions specializes in landscaping and creating outdoor living spaces.
AMD has reportedly released FSR 4 for RDNA3 GPUs in Valve Proton Experimental
AMD FSR4 appears to be coming to Valve’s Proton Experimental.
Zeiss Medical Technology Collaborates With Envision Health Technologies to Advance Glaucoma Care Using VR-Based Testing
JENA, Germany—Zeiss Medical Technology, a leader in medical optics and digital healthcare solutions, has announced a strategic collaboration with Envision Health Technologies, a digital eye health company founded by glaucoma surgeon Lama A. Al-Aswad, MD, MPH, CEO, to help advance glaucoma care through gamified virtual reality (VR) technology. The companies said this collaboration aims to firmly strengthen scientific and clinical credibility in VR-based visual function testing, supported by Zeiss’ long history of innovation in perimetry, and will bring together clinical expertise and software innovation to help advance clinically relevant, patient-centered technologies for modern glaucoma care.
Your Storage Problem Has a Prime Day Solution. We Found SSDs Starting at $50
From budget picks to blazing-fast upgrades, here's every Prime Day SSD deal worth your attention.
Driving Business Performance and Circular Water Practices at Moeve’s San Roque Energy Park
Optimizing water use through circular solutions is a key goal for Moeve as well as a strategic priority for Spain, due to growing pressure on the country’s water resources.
Shinobi: Art of Vengeance coming to Nintendo Switch 2
SEGA is putting Shinobi: Art of Vengeance on Nintendo Switch 2, the company just announced. Fans will be able to grab this version on September 24, 2026. Shinobi: Art of Vengeance previously came to Nintendo Switch. However, on the new console, it’ll feature an improved resolution. For those interested in the game, check out the following details: The iconic Shinobi...
Perceptive Capital Solutions Corp and Freenome Announce Effectiveness of Registration Statement for Proposed Business Combination
/PRNewswire/ -- Perceptive Capital Solutions Corp ("PCSC") (Nasdaq: PCSC), a special purpose acquisition company ("SPAC") sponsored by an affiliate of...
PAHO Executive Committee concludes 178th session with key decisions to strengthen health across the Americas
Washington, D.C., 18 June 2026 (PAHO) – The 178th Session of the Executive Committee of the Pan American Health Organization (PAHO) concluded today after four days of discussions on the Region's most pressing public health priorities, with Member States approving a series of strategies, plans of action and resolutions that will help strengthen health systems, improve preparedness for health emergencies, and expand access to essential health services across the Americas.
Grand Theft Auto 6 pre-orders begin June 25th, cover art revealed
Wallpapers are now available at up to 5K resolution.
ICON International Launches Content and Entertainment Solution, Establishing New Pathways for Brand-Funded Film and Television
/PRNewswire/ -- ICON International, the media-backed financial solutions company, today announced the official launch of its Content and Entertainment...
How Arkansas schools can create strong systems to support students’ mental health
Mental health issues in schools are no longer kept under wraps. But that focus must be expanded into more comprehensive solutions.
The Sperm-Maxxing Bros Are Actually Onto Something
Wellness influencers have stumbled onto a huge issue when it comes male fertility, though not every solution they're pitching is good advice.
FreeCast Launches Starlink Business Connectivity Solutions Through Strategic Reseller Agreement
FreeCast, Inc. (NASDAQ: CAST), a technology company providing streaming media aggregation, distribution, and Platform-as-a-Service (PaaS) solutions, today an...
The Face of Business Growth
Don Winkle brings a practical, solutions-oriented approach to mergers, acquisitions, and corporate finance.
IT Experts: Brandy Semore, Pinnacle Business Systems
Brandy Semore serves as Vice President of Professional Services at Pinnacle Business Systems, where she leads engineering and project management teams delivering technology solutions across multiple industries.
Newark drops bid to give outgoing councilman health benefits for life
The Newark City Council today pulled a resolution that would give outgoing Councilman Carlos Gonzalez lifetime taxpayer-funded health benefits and
Business for Good: Coblrshop for Your Vintage Glow-Up
What to do when your Eagle’s Eye cardigan or Rick Owens platform booties need a fix? A Fairmount entrepreneur has a convenient solution.
Plantwatch: Russian dandelion offers solution to global rubber shortage
Scientists are returning to a wartime solution that may be more sustainable than the traditional rubber tree
Latvia pilots citizen engagement in research grant evaluations
Latvia has introduced an element of citizen engagement to the evaluation of nationally funded research grants. The aim is to both create more connections between science and society, and to improve the quality of its evaluations. The move comes as research funders across Europe are experimenting with ways to improve evaluation processes in the face of a sharpened focus on science’s impact on society. Evaluators of grant applications submitted to Latvia’s Fundamental and Applied Research Programme (FLPP), the country’s main research funder, will this year have the option of consulting citizen feedback on challenges the public thinks science should focus on to inform their decisions. “In recent years, both public discussions and policy-level debates in Latvia have highlighted the importance of demonstrating how publicly funded research contributes to society, the economy and the resolution of real-world challenges,” said a source at the Latvian Council of Science (LCS), which manages the FLPP. “At the same time, research institutions themselves expressed interest in improving the project evaluation framework while continuing to ensure that funding is awarded to the highest-quality projects,” the source added. The citizen input comes from a survey that was conducted between 25 February and 16 March 2025, to which 1,737 people responded. It gathered information on what the public views as problem areas for Latvia, and the role of science and technology in providing solutions to these problems. A summary of these responses has been included as an annex to the FLPP 2026 call for proposals that evaluators can refer to, purely in an advisory manner, when judging proposals. Results from the survey show that the main problem areas identified by the public were in healthcare and public health, followed by the development of new treatment methods and medicines, and then digital technology, data security and cyber security. At the bottom of the list was research aimed at acquiring new knowledge about the universe, matter and the laws of nature. Further analysis looked at the public view of the possible role of science in solving these problems. The survey charted 4,167 individual responses based on open-ended questions that were derived from the participants’ answers. The analysis again found that medical and health sciences topped the scoring, with 788 responses referring to the field. Humanities and the arts were bottom of the list, with 625. Digging further into the details, the survey suggests citizens are aware of and concerned about a number of research areas. This includes technologies and innovation to improve the environment or reduce pollution, the development of modern military technologies and cybersecurity tools, and the development and application of artificial intelligence, among others. “We hope this initiative will help strengthen public trust in science and create a more meaningful dialogue between researchers and society,” the LCS source said, adding that it offers benefits to researchers, evaluators and to the general public. More space for citizen engagement in evaluationsThere is a gradual but increasing use of citizen engagement in research evaluation processes around Europe, especially in healthcare, but it remains relatively rare, said Henry Sauermann, a professor at the European School of Management and Technology in Berlin and an expert in citizen science.“Given that we are at a point where citizen involvement is extremely limited, there is presumably space for more, but it's not that we should do it just because we want to do it,” he told Science|Business. He said some research lends itself better to having citizen input, and this usually tends to be on the applied end of the science spectrum where the public can offer useful feedback based on their experiences. He added that advising scientists on certain topics to study is also a useful approach, in the way that Latvia is doing. “The public does fund a lot of science, there's a lot of tax money going into this. We of course do want to preserve academic freedom, but it's also not unreasonable to incorporate more feedback or input from citizens where possible,” he said. Related articlesCitizen science: where, when, and how to let the public contribute to researchHow can Europe cope with a flood of AI-assisted research grant proposals?Data Corner: Horizon Europe’s AI, digital and data call success rate is 5.2%There are several ways of involving citizens in science funding. The most minimal way is having a few representatives on a panel, such as members of a patient group or union. The most direct way is crowdsourcing funding for specific projects. There is an increasing number of online platforms that allow the public to chip in to support scientific proposals.Sauermann studied this in a recent paper and found that it can have its uses, but it still is not clear if there are benefits to it. There are various assumptions linked to citizen engagement, for example that it increases public trust in science, or that it provides a representative view of what the public thinks about science. These are not necessarily true, Sauermann found. People who participate in engagement activities tend to already be very trusting of science, and, on the whole, it is generally the well-off and well educated who contribute, giving a narrow view of public opinion. On whether citizen input can help manage the increasing number of proposals that are being submitted due to assistance from AI, Sauermann is more sceptical. “The obvious answer to the flood of AI-written proposals is AI-driven evaluation,” he said, adding that it doesn’t mean citizen engagement shouldn’t be a part of evaluations in a well thought-out manner. Southern Denmark’s successful approachOne successful example of citizen engagement in science evaluations was implemented in southern Denmark. Between 2019 and 2025, citizens in the region were invited to vote to fund one of five pre-selected projects in the field of healthcare. The project, called A Healthier Southern Denmark, was a collaboration between regional authorities, the University of Southern Denmark, and two media partners. Over the seven years, there were 75,000 votes and significant public engagement online and on social media. “It was a bit of a wild project, we’d never done something like that before and we were a bit nervous about what would be said in the media about it. But actually, people were very positive,” said Anne Kathrine Overgaard, one of the main organisers of the project from the University of Southern Denmark. The university and its researchers have learned a lot from the experience, particularly about engaging with society and shaping their research to match real-world needs. This is important with Europe’s increasing focus on competitiveness and bringing innovations to market faster, Overgaard said. She hopes to see more citizen engagement in evaluation processes and in science more broadly. “For many years, citizen engagement has been a bit of an add-on to proposals, just to check a box. But I think things are changing,” she said. It’s less about citizens just gathering data and more “about the dialogue between the public and the scientists,” she said. The initiative ended last year as the team wanted to regroup to find fresh momentum. The development of AI and AI-written proposals has made Overgaard reflect on how the project could be reworked to help evaluators. She hopes to bring it back in the future. “It could be a good idea to try this initiative again in a slightly re-worked format,” she said.
Senate fails to advance war powers resolution to halt U.S. action against Iran
It has become an almost weekly effort to rein in President Donald Trump
Senate fails to advance war powers resolution to halt U.S. action against Iran
It has become an almost weekly effort to rein in President Donald Trump
Senate rejects resolution to block Trump from further strikes on Iran
The vote, just days after the U.S. and Iran agreed to a limited deal to stop fighting, is a setback for Democrats’ effort to force the president to bring the conflict to a conclusion.
Q&A: What does science say about plants as medicine?
Plants have always played an integral role in traditional medicine and healing practices. In this Q&A, Kent Vrana, Elliot S. Vesell Professor of Pharmacology and director of the Center for Cannabis and Natural Product Pharmaceutics at Penn State College of Medicine, discussed the relationship is between plant science and human health and the growing role of plant-derived solutions in medicine.
Pathlock Partners with NTT DATA Business Solutions to Deliver Managed SAP Cybersecurity Services Worldwide
/PRNewswire/ -- Pathlock, a leader in Identity and Access Governance and ERP Security, today announced a global strategic partnership with NTT DATA Business...
Apptio Unveils Conversational Insights and New Suite of AI-Powered Capabilities to Translate Complex Technology Spend into Measurable Business Outcomes
Apptio announced significant updates to its solution suite designed to turn technology investment into measurable business outcomes and establish best practices for the financial governance for AI in a time of record infrastructure investments.
These projects help companies leverage AI to tackle pressing business needs
Whether helping to fight hackers or speeding up drug discovery, these World Changing Ideas are giving businesses helpful AI solutions.
GLP-1 and weight-loss drugs: How fast-track health solutions are reshaping FMCG
GLP-1 weight-loss drugs are reshaping FMCG as health, body control, and self-optimization trends redefine consumer behaviour across Europe.
SkinVision Pro Launches Globally at HLTH Europe: AI-powered Skin Health Platform Connected To Healthcare Providers
SkinVision today launched SkinVision Pro, a platform that connects medical practices directly to the SkinVision Service, an AI-powered solution that provides a risk indication for skin spots. The announcement was made at HLTH Europe, responding to growing demand from medical practices seeking to integrate skin assessment results into their clinical workflow. The launch comes as skin cancer incidence has tripled over the past two decades, dermatology wait times reach up to six months in many heal
Trella Health Launches Physician Group Explore & Analyze to Help Post-Acute Organizations Identify High-Value Referral Opportunities
Trella Health, the leading provider of market insights and CRM solutions for post-acute care – now supporting hospital discharge planning via its Repisodic platform – today announced the launch of Physician Group Explore & Analyze, a new feature within Trella Insights designed to help home health, hospice, and skilled nursing organizations identify, prioritize, and engage high-value physician group opportunities.
Cleveland County residents may soon be able to invest in the Rock Creek Entertainment District arena
The Cleveland County Recreational and Entertainment Facilities Authority unanimously approved a resolution naming a trustee bank and underwriters for anticipated bonds up to $230 million to finance the Rock Creek
IBX team wins first place at Google Code for the Cure Hackathon with AI prototype to make prior authorization clearer and fairer
A team of associates from Independence Blue Cross’s (IBX) Advanced Analytics and Data Science department won first place at a recent Google Code for the Cure Hackathon in New York City. The event, run by Google Cloud, brings together teams to build real-world AI solutions to health care challenges. In just four hours, the IBX team designed and built a fully functional prototype that shows how AI can make prior authorization decisions clearer, more consistent, and fair for patients and providers.
Edward Jones Expands Workplace Retirement Solutions for Business Owners and Their Employees
With new products, investments and product partners, Edward Jones is helping business owners support employees while preparing for their own financial futures....
Edward Jones Expands Workplace Retirement Solutions for Business Owners and Their Employees
Edward Jones today announced a significant expansion of its workplace retirement plan capabilities, adding new product partners and solutions designed to help business owners and their employees improve long-term financial fulfillment.
Paranovus Entertainment Technology Limited Signs Non-Binding Letter of Intent to Acquire Jabanero Inc.
NEW YORK, NY / ACCESS Newswire / June 15, 2026 / Paranovus Entertainment Technology Ltd. (NASDAQ:PAVS) ("PAVS" or the "Company"), a consumer products and digital commerce solutions company, today announced that it has entered into a non-binding Letter ...
Ericsson Private 5G now available for Verizon Business private networks internationally
/PRNewswire/ -- Ericsson announced today its private wireless networking solution, Ericsson Private 5G, is now available through Verizon Business private...
Why Marketing Feels Harder as Your Business Grows by Nathan Tayloe
At some point, most growing businesses hit the same moment. What used to feel straightforward starts to feel more complicated. Marketing takes more effort. Results feel less predictable. What once worked consistently begins delivering mixed outcomes. It is easy to assume something is broken. In many cases, nothing is. The business has simply reached a different stage. What Worked Before Starts to Lose Its Edge Early on, growth is often driven by a few things working well at the same time: Referrals are strong The value of the offering is clear The team is aligned Decisions are made quickly Marketing, in that stage, tends to feel easier because the business itself is easier to understand. As the company grows, that simplicity fades. The audience expands. Services evolve. New people join the team. More channels are added. More decisions are made across more touchpoints. Marketing is no longer communicating one clear story. It is trying to represent a more complex business. Complexity Creates Friction That added complexity does not always show up immediately. It builds over time. Messaging starts to drift. Different parts of the business describe what they do in slightly different ways. The website no longer reflects how the company actually operates. Sales conversations evolve faster than the brand. At the same time, more activity is introduced to try to keep growth moving: New campaigns More content Additional platforms More tools and reporting The volume increases. The clarity does not always keep pace. That is when marketing starts to feel harder. It’s Not a Lack of Effort Most teams respond to this stage by doing more. More output More meetings More adjustments More experimentation That effort is not misplaced. It is often pointed in the wrong direction. When the underlying issue is a lack of alignment, more activity tends to create more noise. Results become harder to interpret. Decisions take longer. Progress feels inconsistent. From the outside, everything looks active. From the inside, it feels less certain. The Real Shift As businesses grow, marketing becomes less about execution and more about alignment. The companies that navigate this transition well tend to refocus on a few fundamentals: A clearly defined audience A strong, consistent position in the market Messaging that reflects how the business actually operates Alignment between leadership, marketing, and sales When those elements are in place, execution becomes more effective again. Marketing does not necessarily become easier, but it becomes more consistent. A Different Kind of Discipline Growth introduces more opportunity, but it also demands more discipline. What worked when the business was smaller often cannot be scaled without adjustment. The systems, messaging, and decision-making that once felt intuitive need to become more intentional. That is not a sign of failure. It is a normal part of growth. Marketing feels harder because the business has become more complex. The solution is not to outwork that complexity. It is to bring clarity to it. The companies that do that well tend to regain momentum quickly. Those who do not often stay busy without seeing the same level of progress. — Learn more about how we help organizations align strategy, brand, and execution. Visit tayloegray.com, or reach out directly at nathan@tayloegray.com.
68 quadrillion underground miles of fungi
With machine learning and a high-resolution imaging robot, scientists measured and mapped the extent of Earth’s carbon circulatory system.
Is SMIC N+3’s Metal Pitch Smaller than Intel 18A’s?
Almost four years ago, we published that SMIC had started shipping 7 nm (N+1) chips. Now, SMIC is shipping its third-generation 7 nm (N+3) process in Huawei’s Kirin 9030, with a minimum metal pitch of 32.5 nm, about 10% tighter than the 36 nm minimum metal pitch shipping in Intel’s latest Panther Lake CPUs on 18A. The headline is true, but incomplete cherry picked metric. N+3 reaches the density of TSMC N6 through aggressive DUV multi-patterning and design-technology co-optimization (DTCO), but it pays for that in complexity, efficiency and process control. We found this and more in our reverse engineering and teardown where we cover SMIC’s N3 process technology, Huawei’s packaging, memory, architecture, and more. SemiAnalysis has been building a state-of-the-art teardown lab in Oregon capable of analyzing the world’s most advanced and important chips over the last year and half. We have already generated revenue on advanced datacenter chip teardowns including our recent reverse engineering of a major TSMC customer’s COUPE CPO optical engine + EIC 3D stack. This is the first public report from the SemiAnalysis Teardown Engineering & Evaluation Lab, or STEEL for short. The lab is aggressively scaling up and out and we’re excited to announce it publicly. This is a bit of inconvenient timing for TechInsights as they are private equity owned and currently being sold while having enjoyed virtually no credible competition for decades. This has led to TechInsights underinvesting in CAPEX. SemiAnalysis exceeds TechInsights in revenue despite no venture or private equity ownership and being founded only 6 years ago. Because we have no external investors and are founder led, we move faster, build faster, and we can release client chip teardowns for free regularly, while focusing on datacenter for our major clients. Here’s the first public image from our lab, the HiSilicon Kirin 9030 Pro SoC: This report will detail our teardown of the Kirin 9030 and our findings on SMIC’s N+3 process, the most advanced in China. For comparison, we’ll show our teardown of the MediaTek Helio G99, made on TSMC N6. Through this comparison, we can look at the effect of export controls – SMIC N+3 and TSMC N6 are comparable nodes, but one is heavily export-controlled, the other free to use the West’s most advanced equipment. Here we see both China’s progress and constraints. SMIC N+3 reaches TSMC N6-class logic density, but it requires far more aggressive DUV multi-patterning, so it does not match N6 on process maturity or cost. The Kirin 9030 Pro performs similarly to three-year-old Android flagships, and trails far behind the current flagship SoCs from Apple, Qualcomm, MediaTek, and Samsung. The efficiency gap is even wider. Export controls have not stopped Huawei and SMIC from shipping advanced silicon, but they have forced a different path. Without EUV, SMIC is leaning harder on DUV multi-patterning, DTCO, and increasingly complex integration. The roadmap continues forward through tighter design rules and backside power, but each step adds cost and process risk. Huawei’s τ scaling and LogicFolding show another path: stacking active logic and recovering density through advanced packaging and system-technology co-optimization (STCO). To understand the Kirin 9030, we must first understand Huawei’s SoC history. HiSilicon is Huawei’s chip design arm, responsible for the Kirin smartphone SoCs, Kunpeng server CPUs, Ascend AI accelerators, and switch/router networking silicon. Before export controls, Huawei was TSMC’s largest customer – the only customer on TSMC’s first EUV node, N7+, and among the first on N5, alongside Apple. That ended in late 2020. Huawei switched to Qualcomm SoCs in its flagship smartphones, though export controls limited them to 4G-only variants. In late 2023, Huawei returned to in-house silicon with the Kirin 9000s, a successor to the Kirin 9000, fabricated on SMIC N+2 instead of TSMC N5. In the following years, they released the Kirin 9010 and 9020 on the same N+2 process. These chips used Huawei’s in-house TaiShan CPU cores and Maleoon GPU. We have not torn down a Kirin 9020 ourselves, so the predecessor die shot is from Kurnal. The die shots show how Huawei spent its silicon budget: which functional blocks are where, and how their areas compare to the predecessor. First, a quick guide to the major blocks on the die. The total die area is nearly identical, but the 9030 uses that area more aggressively. A denser process lets Huawei fit an extra middle CPU core, more GPU and NPU cores, and larger caches into the same footprint. In contrast, the Helio G99 is a much smaller, low-cost SoC, built for budget smartphones rather than a flagship device. While the Kirin 9030 is ~140 mm², the G99 is only ~29 mm², roughly one-fifth the area. The underlying TSMC process technology, however, is directly comparable as a baseline for analyzing SMIC’s. The Kirin 9030 is an evolutionary refresh, not a clean-sheet design. Its CPU, GPU and NPU cores carry over the 9020’s families, and the gains come from three levers: the SMIC N+2-to-N+3 process step, DTCO and floorplan work, and incremental microarchitecture. Area is where the first two show up, and the 9030 scales well here. Performance and efficiency are the harder test. Huawei’s design holds up better than its node would suggest, but the chip still trails, both because N+3 sits behind the leading-edge nodes and because its cores, while competent, remain a few generations behind the newest designs. The new prime core is an incremental update. The main changes are a 10% frequency increase from 2.5 GHz to 2.75 GHz and a doubling in the L2 cache from 1 MiB to 2 MiB. Despite the increased cache, the core size decreased by 7.6%. Excluding the private L2 cache, the core size decreased by 21%. This is a large reduction for an incremental node. Compared with the TaiShan New V120 core in the Kirin 9020, the Kirin 9030’s middle core is almost unchanged architecturally, yet each core shrinks by ~22%. Most of that comes from the move from N+2 to N+3, with layout likely accounting for the rest. Visually, the most noticeable change is the increase from 3 middle cores to 4. There is also a 20% increase in the shared L3 cache of the big cluster. This helps to improve multi-core performance without sacrificing much in terms of area. Even with each core shrinking, the big CPU cluster’s total area is essentially unchanged. The per-core savings went back into an additional middle core and larger caches. The tiny cores shrank less than the prime core (excluding its L2 cache) and less than the middle cores. This is likely because fixed overhead is a larger share on a small core. We cannot resolve any architectural changes from the die shot alone, but the per-clock and efficiency gains shown below point to more than pure process and layout scaling. The area reduction was offset by a doubling of the shared L2 cache from 2 MiB to 4 MiB, leaving the total tiny CPU cluster area slightly larger. Area is the easiest improvement to see from a die shot, but it is only one part of PPA (power, performance, area). For modern logic, power and performance matter just as much, and often more. Since Dennard scaling broke down in the mid-2000s, voltage and frequency have not scaled in step with transistor dimensions, so each node has had to fight harder for gains in performance and efficiency. The starkest comparison is not Kirin 9020 versus Kirin 9030 Pro. Apple’s efficiency cores run circles around Huawei’s prime core. Apple’s low-power core delivers 20% higher integer performance while drawing only 1 W, compared with 4.5 W for Huawei’s prime core. N+3 matches TSMC N6, but N6 is several generations old. Apple and Qualcomm build on N4 and N3P, which are denser and sit on a better voltage-frequency curve, giving them a larger transistor budget and more performance per watt. The 9030’s own cores did improve. The middle and tiny cores gained 17% and 14% in per-clock integer performance over the 9020, with floating-point flat on the middle core and up 11% on the tiny. The tiny core improves cleanly, with performance rising while power falls and efficiency increases by 45% in integer and 24% in floating point. The middle core is mixed: integer performance rises but power rises faster, cutting integer efficiency by 7%, while lower power lifts floating-point efficiency 16%. Per-clock gains at the same or lower frequency are microarchitectural, so the cores are tuned, not just shrunk. Both also failed to hold their rated maximum frequencies, pointing to thermal, power, or stability limits. Per clock, the middle core sits around Arm Cortex-A720 and the tiny core near the Cortex-A520; absolute performance trails because Huawei clocks them much lower. The prime core is roughly Cortex-X2 class per clock, a 2021 design. Apple’s 2020 M1 Firestorm core is still 35% higher per clock and 57% faster in absolute integer performance at a similar 4.5 W. The current leading edge is further ahead again: the Apple M5 P-core is 60% higher per clock and 2.7× faster, the Arm C1 Ultra 45% higher and 2× faster. Matching older high-end cores per clock is a genuine design achievement. What Huawei cannot match is the voltage-frequency curve and transistor budget of leading-edge nodes, which let Apple, Qualcomm and others spend more transistors in the same area on wider cores, larger caches and deeper buffers while running at lower voltage. Huawei’s LogicFolding roadmap is one answer, stacking active logic to recover density and shorten signal paths. We return to it later. The GPU compute units (CUs) changed more visibly than the CPU cores, moving to a more rectangular layout for both the arithmetic logic unit (ALU) clusters and the CU overall. Even with ray-tracing support added, a CU shrank ~28%. However, that shrink is offset by the increase from 4 to 6 CUs and the area outside the CUs grew 33%. Overall, the GPU cluster is larger by ~10%. The GPU is where Huawei makes its biggest gains. The Maleoon 935 is not competitive with current flagships, but it is a large step up from the 920 and reaches older-flagship territory. In 3DMark it is 70% faster in Wild Life Extreme (WLE) and 79% faster in Steel Nomad Light (SNL) than the 920; with 11% higher clocks and 50% more CUs, the ~67% theoretical uplift roughly matches WLE and is beaten by SNL. It edges ahead of the Snapdragon 8+ Gen 1 in WLE and SNL, and the Dimensity 9200 and Apple A16 in WLE, but stays far behind newer parts: the Snapdragon 8 Elite Gen 5 and Dimensity 9500 are ~2.4–2.6× faster in WLE and ~3.2× faster in SNL. The Maleoon 935 is Huawei’s first GPU with hardware-accelerated ray tracing; there it lands slightly ahead of the Exynos 2200, and on par with the Apple A16, with current flagships up to 3.7× faster. The Neural Processing Unit (NPU) saw the largest structural changes of any block, moving from a Lite and a Tiny core in the Kirin 9020 to a Lite and two Tiny cores in the Kirin 9030. Both core types also show significant layout changes. This is a reversal in Huawei’s NPU design. The Kirin 9000 5G, its last flagship chip on TSMC N5, used two Lite and one Tiny core. The series of SoCs on SMIC N+2 moved to one Lite and one Tiny core, likely for area savings. With the Kirin 9030, Huawei has shifted back toward a larger multi-core NPU cluster, but with the additional area going to a Tiny core rather than a Lite core. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Before diving into the process stack, the package and memory are worth separating from the SoC itself. The Pro variant of the Kirin 9030 carries 12 GB of Samsung DRAM, with two stacks of four dies each. The dies were identified as the K4L2E165YD, a 12 Gb LPDDR5X-9600 device fabricated on Samsung’s 1a node, the fourth generation of its 10 nm-class DRAM after 1x, 1y and 1z. 1a has shipped in volume since 2022, so this is current memory rather than older-node inventory. The 16 GB Pro Max variants we obtained were found with both CXMT and Samsung packages. The CXMT package is marked CXDD7JEDM, with two stacks of four dies, packaged in week 45 of 2025. The inferred die dimensions from X-ray computed tomography (CT) are consistent with a known density of ~0.3 Gib/mm² for the CXMT G4 process, roughly equivalent to other manufacturers’ 1z processes. The Kirin 9030 uses a typical integrated package-on-package (iPoP) stack: multiple DRAM dies in a memory package sit above an organic redistribution layer (RDL) interposer, which sits above the SoC and package substrate. The full package is then mounted to the printed circuit board (PCB) through ball-grid array (BGA) solder bumps. The memory package substrate is a thin bismaleimide-triazine (BT) laminate carrying the LPDDR5X stack. The organic RDL interposer over the SoC routes the PoP signals around the die and carries possible dummy thermal copper pillars. The package substrate, a thicker Ajinomoto Build-up Film (ABF) build-up over a BT core, fans the flip-chip bumps out to BGA pitch and embeds the power planes. The whole stack is organic. The only silicon is the SoC and the LPDDR5X dies; there is no silicon interposer. Keeping it all-organic brings the package’s coefficient of thermal expansion (CTE) close to the PCB’s, reducing board-level warpage, and avoids the cost of a silicon interposer the SoC’s bandwidth does not need. In an iPoP stack, the memory package connects to the organic RDL interposer through an array of solder bumps. Underfill fills the gap around those bumps, adding stiffness and protecting the joints from mechanical stress. The Pro and Pro Max variants differ here, which we cover behind the paywall. The die shot and architecture tell us how Huawei allocated its silicon budget. The process tells us what SMIC can manufacture. We use the Helio G99 as the process reference for TSMC N6. Both SMIC N+3 and TSMC N6 are evolutions of previous 7 nm-class nodes. We used targeted TEM cross-sections through logic and memory regions, imaged in both fin-cut and gate-cut directions. Each cross-section caption gives its horizontal field width (HFW), the real width of the imaged area. We start at the transistor fins, then move up through standard cells, local interconnect, and SRAM. SMIC has not overtaken Intel or TSMC. It uses aggressive DUV scaling and DTCO to reach N6-class density, but that density doesn’t translate into comparable performance and efficiency, for two reasons: the node gap to leading-edge nodes, and Huawei’s core designs. Fin Profile One of the most important knobs in a FinFET process is the fin profile: the shape of an individual fin and the channel where current passes from source to drain. The ideal fin is tall, narrow, and nearly vertical. A taller fin increases effective channel width, while a narrower fin improves electrostatic control by thinning the body the gate must control. Push either too far, and the process pays for it: weaker drive current, fragile fins, taper, footing and line-edge variation that hit yield and device variability. The Intel 22 nm, 14 nm, and 10 nm fin cross-sections show how FinFET nodes have improved over time. 22 nm fins were a first-generation structure, relatively short, wide and strongly tapered. The shape limits current density and reduces gate control uniformity across the height of the fin. At 14 nm and 10 nm, Intel pushed the fins taller and narrower while also making the sidewalls more vertical. Rather than shrinking the device, these changes increase the effective channel width per fin and improve electrostatic control. The trade-off is that taller fins at tighter pitches are much more difficult to manufacture. Now, let’s compare the Helio G99 on TSMC N6 with the Kirin 9030 on SMIC N+3. Both processes are in the same class, with fin pitch of 30-32 nm on N+3 and 34 nm in our N6 cross-section. The pitch for N6 is especially interesting as N7’s HD library is generally listed with a 33 nm fin pitch, and N6 did not shrink pitches directly. Its density gains came from DTCO instead of tighter pitches. The 34 nm pitch was stable across our sampled region and serves more as a comparison against the SMIC N+3 we have not investigated further. Pinning down N+3’s fin patterning scheme takes more than one core unit. The CPU cores show a dense ~32 nm pitch, with the pitch between N-P fin pairs alternating between 78 and 88 nm. Logic alone may be consistent with dual-pitch mandrels of 120 and 110 nm, but this is a complex and unusual approach. Combining the pitch from the the 8T SRAM, which has more complex repeat unit, with the CPU core sequence allows us to reverse engineer the patterning steps with more confidence. As both the logic and SRAM should share the same base grid, a single CD mandrel lithography pattern with 128 nm pitch undergoing SAQP produces a die-wide ~32 nm grid (128 nm/4), which supports the pitch sequencing seen in both logic and SRAM cells. In the sampled cross-sections, N+3 shows a taller, narrower, higher-aspect-ratio fin than N6. The measured fin aspect ratio is ~9.5:1 on N+3 versus 7.8:1 on N6. N+3 also shows less top rounding, with an estimated radius of ~2 nm, compared with 2.8 nm on N6. Even though the fin widths differ, the ratio of top rounding to fin width tells the same story, with N+3 at 0.37 and N6 at 0.44. In a geometric sense, lower is better; a perfectly rectangular fin would have no top-rounding penalty. These are single-digit-nanometer features measured from a handful of cuts, so treat the absolute numbers as approximate. The important result is the relative gap: N+3’s fins are consistently taller, narrower and less rounded than N6’s. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Standard Cell A standard cell is the basic building block of chip layout: a fixed-height row pairing one NMOS and one PMOS transistor that share a gate, tiled in a grid to build logic blocks. The key dimensions are contacted gate pitch (CGP), cell height (CH), fin count, and the lower-metal routing grid. To measure density, we use the Bohr metric: a weighted average of NAND2 gate area (60%) and scan flip-flop area (40%). This represents a realistic mix of combinational and sequential logic. This metric has its limitations, especially for complex cell layouts like TSMC’s FinFLEX, which alternates cells with different fin counts. Even so, it is the best metric for a pure process-level comparison. Another important measurement is the fin pitch; it refers to the distance between two fins of the same transistor. In a FinFET process, multiple fins are used in each transistor to increase the drive current and thus performance. TSMC N6 ships both a high-density (HD) library with 2 PMOS and 2 NMOS fins per cell, and a high-performance (HP) library with 3 of each. More fins under the shared gate mean more effective channel width. HP cells switch harder at the cost of area. Designers mix the two on a die, primarily spending HP cells on timing-critical paths, and matching their PPA targets. In the Cortex-A55 core of the Helio G99, we found a cell height of 240 nm for the HD cell. MediaTek has used HD cells in the G99 to minimize die size and thus cost. As an SoC for budget smartphones at ~$100, this is essential. By contrast, we found only one library in the Kirin 9030, with 2 NMOS and 2 PMOS fins. This suggests a narrower library strategy than TSMC N6, where both HD and HP libraries are widely used. This likely reflects the smaller customer base and the more constrained domestic design and electronic design automation (EDA) ecosystem. In all three CPU cores of the Kirin 9030, we found cell heights of 228 nm, 5% smaller than on N6. This is also a reduction of 9.5% over SMIC N+2’s cell height of 252 nm. SMIC N+3 and TSMC N6’s HD library both feature a CGP of 57 nm. For SMIC, this is a 9.5% shrink over N+2. In the past, CGP and cell height alone may have been enough to compare transistor density. Now, however, we must consider scaling boosters and DTCO as well. SMIC’s density gain does not come from EUV. It comes from using every available DTCO booster aggressively. First is fin depopulation: reducing the number of NMOS and PMOS fins in each cell. The first FinFET nodes started with 3 or 4 fins for each transistor. SMIC N+3 and TSMC N6 HD both use only 2 fins per transistor, trading drive strength for density. Next is contact over active gate (COAG). By landing the gate contact directly over the active gate, instead of out over the isolation region, the cell height drops. N+3 integrates COAG while N6 does not. Our N+3 gate-cut cross-sections indicate COAG, with the gate contact sitting over the active region, while N6 shows an off-gate contact. Last is single diffusion break (SDB). Diffusion breaks are inserted between cells in the same row to provide electrical isolation, but they also introduce local layout effects (LLE), layout-dependent shifts in electrical characteristics. In the past, a double diffusion break was used, consuming the space of two CGPs. SMIC N+3 and TSMC N6 instead use SDB, saving area but increasing LLE sensitivity. This must be controlled at the process level and accurately modeled in the process design kit (PDK) so that EDA tools can account for it. Overall, SMIC N+3 has a transistor density of 113.4 MTr/mm², slightly above TSMC N6 at 107.7 MTr/mm². Even without EUV, SMIC has achieved density beyond TSMC’s mature N6 node which utilizes EUV. Metal Stack The smallest critical dimension in the teardown is M0; SMIC N+3 uses a 32.5 nm local metal pitch. That is smaller than the 36 nm M0 pitch on Intel 18A in Panther Lake. However, this does not mean that SMIC has a better process than Intel 18A or TSMC N3P. M0 is a local intra-cell routing layer. Its usefulness depends on the full interconnect stack: M1 and M2 pitch, track count, via and line resistance, design rules, mask count, overlay control, and routing flexibility. The 32.5 nm M0 is consistent with self-aligned quadruple patterning (SAQP), whose four-population line-width loading we read coarsely as alternating widths of 21.5 to 24 nm; M1 and M2, at 38 and 40 nm, are consistent with self-aligned double patterning (SADP), a single A/B split. On TSMC N6, M0, M2, and M3 sit at a relaxed ~40 nm and are consistent with SADP-class double patterning, with no need for quadruple patterning. That said, we measure M2 for example at ~43 nm, likely inflated by sparse routing. We do not assign any specific layer to EUV from our cross-sections; the distinction we can draw is double versus quadruple patterning, not lithography wavelength. Transistor-level density in the front-end-of-line (FEOL) sets an upper bound, but the design is ultimately limited by what the interconnect stack can route. The lowest metals are the most important for standard-cell density, but the semi-global and global layers determine how usable that density is at the block and chip level. Two axes are commonly used for chip cross-sections: the fin-cut and the gate-cut. The micrograph above is a fin-cut and shows metals 0 through 3. This axis lets us see the even-numbered metals, with M0 right above the fins. There are two kinds of M0 lines. The first are the power rails; these are wide wires for the VDD and VSS running horizontally at the top and bottom edges of each standard cell. The wide wires measure 55 nm across, more than double the other M0 lines. Their width minimizes resistance and reduces IR drop. The second kind are intra-cell wires, short segments within the cell that connect terminals to M1. These have alternating widths between 21.5 and 24 nm. The M0 pitch is 32.5 nm, a 19% reduction versus N+2 and N6. At this pitch, DUV patterning requires more aggressive multi-patterning, increasing mask count, overlay sensitivity, process complexity and cost. M0 is below what a single DUV-defined spacer (SADP) can resolve, so SMIC cascades a second spacer step (SAQP). The cross-section reflects the cost: the M0 trenches are visibly more re-entrant (narrower at the bottom than the top) than M1 or M2 on the same chip and carry a bright barrier-rich foot where the trench meets the etch-stop layer. That shape is partly the intended damascene profile, as a slightly narrow bottom helps void-free copper fill, but its magnitude at M0 is driven by the tight pitch and the higher trench aspect ratio. Intel 18A supports an M0 pitch of 32 nm, although Panther Lake has only shipped with a looser 36 nm pitch. This is due to Intel’s heavy usage of HP libraries. Among leading-edge nodes, 18A has the loosest M0 pitches due to PowerVia. With power routing moving to the backside, congestion is reduced, and the entire front-side metal stack can be used for signal routing. M2 is the first true inter-cell routing layer. It runs horizontally like M0 but spans across multiple cells to carry block-level signals. The M2 pitch sets the cell’s track height – the number of M2 tracks that fit between the VDD and VSS rails, defining what the library calls a 6-track or 7.5-track cell. This layer is the most important, limiting the routing of entire blocks. SMIC N+3 features a 5.7-track cell. The M2 pitch is 40 nm, a 5% decrease over N+2 and the same as N6. This shrink keeps the pitch at the edge of what is possible with double patterning. Future nodes will need to increase the number of masks for M2 as reducing the number of tracks is much harder due to the limitations in routing. The micrograph above is in the perpendicular direction, the gate-cut, and shows metals 0 through 4. This allows us to see and measure the odd-numbered vertical metal layers. The M1 pitch is 38 nm, 9.5% less than N+2 and 33% less than N6. The M1-to-gate ratio matters because it sets local routing flexibility. N+2 and N+3 use a 3:2 ratio, while N6 uses a 1:1 ratio, explaining the huge differences in M1 pitch. The more M1 lines there are compared with the gates, the more flexibility there is for power and signal crossing within the cell. Routing flexibility enables more complex and better cells. Clean fractional ratios are also preferred as a grid is periodic and improves layouts. The 3:2 ratio gives SMIC more local routing flexibility than a strict 1:1 grid, but it also complicates layout and patterning. This is a DTCO choice, with SMIC increasing process complexity to recover density and routability without EUV. This 3:2 ratio is not very popular in the leading-edge nodes. TSMC has only used it on N7+, the N5 family, and the short-lived N3(B). They have switched back to a 1:1 ratio for N3E. Intel has only used it on the 10 nm/Intel 7 family, with Intel 4, 3 and 18A all using a 1:1 ratio. Samsung is the only one still using a 3:2 ratio at the leading edge, using it in the SF4 and SF3 families. It remains to be seen if SMIC will remain at a 3:2 ratio or move to a 1:1 ratio with its future nodes. The industry is still actively exploring these local-routing ratios. At VLSI 2026, imec will be presenting work on even higher ratios, including a 2:1 scheme that can reduce area by up to 14%. We will be covering the conference in a future newsletter article. Subscribe We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. The final local interconnect layer for N+3 is M3, with a pitch of 44 nm. The M3 pitch is the same as on N+2 and 10% larger than on N6. The semi-global layers carry the majority of block-level signal routing. They have a coarser pitch than the lower local layers. On leading-edge nodes, they are designed to sit at the limit of DUV single patterning. M4 through M11 pitches were found divided between 80–82 nm (M4–M6), 128 nm (M7–M10), and 148 nm (M11). Given limited sampling, it is possible these are divided further in dense routing areas. At the top are two giant metal layers, M12 and M13. These have kept the same pitches as N+2 at 1920 nm and 4600 nm respectively. While the lower layers’ pitches are generally fixed by the process and library, the upper layers vary much more in pitch and count, depending on the design. Even two smartphone SoCs on the same process can have wildly different metal stacks. The Helio G99 carries fewer routing layers, reaching coarse metal pitches of 850 nm by M9, while the larger and higher-performance Kirin 9030 keeps fine pitches until M11. SRAM At the leading edge, SRAM is much more difficult to scale than logic. TSMC’s latest nodes have seen little to no bitcell scaling, while logic still has more DTCO levers to pull. While looking for other logic libraries in the GPU compute units, we stumbled upon the SRAM. The most common type of SRAM has 6 transistors (6T), but this cell had 8 transistors (8T) instead. 8T SRAM adds two transistors to form a dedicated read port. Unlike a 6T cell, where reading disturbs the storage, the decoupled read port removes read-disturb, improving read stability and letting the cell be pushed harder for performance. At first glance, the cut looked like an unusual logic library, with each cell row having 3 fins of one polarity and 5 fins of another. The rows also alternated in orientation. Energy-dispersive X-ray spectroscopy (EDS) resolved our confusion. The cut had not landed on the GPU logic, but on the SRAM macro beside it. The unusual fin pattern was due to the SRAM library. We return to EDS in the process flow analysis behind the paywall. SRAM libraries are not like traditional logic libraries. Due to the unequal number of PMOS and NMOS transistors, they require specialized rules and layout libraries. They do not need the flexibility of logic libraries, so they are hyper-optimized for one purpose: dense, reliable memory. The SRAM cell we found is a 1:2:2-2:2 cell. This means there is 1 fin per pull-up (PU) PMOS transistor, and 2 fins per pull-down (PD) and pass-gate (PG) NMOS transistor. These 2 PU, 2 PD and 2 PG transistors would usually form a single 6T high-current cell (HCC). An 8T HCC adds a read-pull-down (RPD) and a read-pass-gate (RPG) NMOS transistor, each with two fins. We measured a cell height of 406 nm, which brings the bitcell size to 0.0463 µm². That is a theoretical peak density of 21.6 Mib/mm². We estimate that a 6T HCC would have a cell height of 292 nm and a size of 0.0337 µm². This is ~12% larger than a 6T HCC on Intel 3 and 4. We also estimate the 6T high-density cell (HDC) to have a cell height of 228 nm and a size of 0.0260 µm². This is coincidentally the same as the logic standard-cell height measured earlier. The estimate puts the cell near Samsung 7LPP/5LPP and slightly below TSMC N7/N6. That is a theoretical peak density of 38.5 Mib/mm². 6T HDC is arguably the most important cell as it is used for the largest caches in a chip, the L3 caches and system-level cache (SLC). Both the Kirin 9020 and 9030 have split the SLC into 4 banks to raise total SLC bandwidth. In the Kirin 9030, the SLC increased from 2 MiB to 3 MiB per bank. Correspondingly, the number of arrays within the bank also increased by 50%, from 16 to 24. Each array can store 128 KiB and forms an orderly pattern on the die shot. From the Kirin 9020 to the Kirin 9030, the area of a 128 KiB SLC array decreased from 0.0477 mm² to 0.0392 mm², an 18% shrink. The achieved density is 25.5 Mib/mm², 66% of the theoretical maximum. While the SLC was quite similar across both chips, the L3 has seen some major changes, particularly in terms of its layout. The total capacity also went up from 10 MiB to 12 MiB. Much like the SLC, the L3 is also split into 4 banks. In the Kirin 9020, an L3 bank consisted of 16× 128 KiB arrays and 16× 32 KiB arrays. However, an L3 bank in the Kirin 9030 instead consists of 48× 64 KiB arrays. In the Kirin 9020 L3, a 128 KiB array was 0.0513 mm² and a 32 KiB array was 0.0154 mm². The size of the 128 KiB array is different on the L3 and SLC as the assist circuitry for the two arrays differs depending on their purpose. In the Kirin 9030 L3, a 64 KiB array is 0.0210 mm². Although not a like-for-like comparison, normalized for capacity, it is 18% smaller than the 9020’s 128 KiB L3 array and 31% smaller than its 32 KiB L3 array. The achieved density is slightly lower than the SLC, at 23.8 Mib/mm², 62% of the theoretical maximum. Unlike the L3 and SLC, the prime cores’ private L2 cache uses a 2-bank design. As the prime cores’ L2 is latency-critical, it likely uses 6T HCC instead of 6T HDC. The 9020 has 16 arrays in each bank while the 9030 has 32. Each array has a capacity of 32 KiB. A 32 KiB array in the L2 shrank from 0.0171 mm² to 0.0142 mm², ~17% smaller. The density is 17.6 Mib/mm², ~59% of the theoretical maximum for 6T HCC. SRAM scaled well from N+2 to N+3, shrinking by ~19%, close to the theoretical logic shrink. The caveat is that N+2’s bitcells were unusually large, bigger than comparable 7 nm-class nodes, so part of the gain is catch-up rather than true scaling. With the insights from STEEL’s teardowns, we will be doing a deep dive into SRAM in a future newsletter article. Subscribe Everything above came out of a single STEEL teardown: die annotation, block-level area analysis and TEM cross-sections through logic and SRAM. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Future Roadmap The same cross-sections that pin down N+3 also show where SMIC can go next. Although N+3 is already close to the practical limits of DUV multi-patterning in several layers, SMIC still has a few scaling levers left. A theoretical N+4 would likely start with cell height. N+3 uses 5 M0 tracks between its power rails. Moving to 4 M0 tracks, as on SMIC N+2 and TSMC N6, could reduce cell height by roughly 15%. The routing grid is only one side of the shrink; the front end also must fit into the smaller cell. One possible FEOL lever is reducing the p-to-n isolation spacing from two diffusion grid units to one. Intel used this scaling booster on Intel 4, and TSMC did so on its N3 family. This path trades layout flexibility for density. Fewer M0 tracks reduce local routing resources, while tighter p-to-n spacing raises integration and design-rule difficulty. M2 is also constrained by the cell height shrink. For SMIC to maintain a ~5.7-track cell, M2 would need to move toward ~35 nm. That would move another layer into SAQP territory. SMIC could also reduce the CGP from 57 nm to 54 nm. Intel reached a similar CGP on Intel 10 nm/Intel 7 without EUV. The local interconnect is also tougher. If SMIC keeps the 3:2 M1-to-gate ratio, M1 would need to shrink to 36 nm and would likely require SAQP as well. If SMIC moves to a 1:1 ratio, M1 could relax to 54 nm, but it would give up routing flexibility. Under this theoretical path, we estimate that SMIC N+4 could reach a cell height of 198 nm and a CGP of 54 nm, implying a Bohr density of 137.8 MTr/mm², on par with TSMC N5 or Samsung SF4. However, the difficulty is cumulative. Each step is individually plausible, but together they make N+4 harder than the transition from N+2 to N+3. It will likely take longer, cost more, and carry less process margin. A theoretical N+5 would require a larger integration shift. One possible path is backside contacts (BSCon), moving power routing and source/drain contacts to the backside, which would reduce front-side routing pressure and enable another reduction in cell height. The front-side metal pitches could relax to reduce the process complexity. M0 would likely relax slightly to ~34 nm, and M2 and M4 pitches could relax further. CGP is unlikely to shrink much further. Even with EUV, 48 nm has been the practical limit for yield and process control. This approach would allow N+5’s cell height to fall to 170 nm and its CGP to 53 nm. This implies a Bohr density of 163.6 MTr/mm², on par with Intel 18A’s HP library. However, this would not make N+5 cost-competitive with the leading edge. It would reach a similar density through a much more expensive route. The integration difficulty rises sharply, with new process flows for backside alignment, wafer thinning, contact reveal, and backside metallization. Past this point, standard density and interconnect scaling become increasingly unattractive. That is where Huawei’s roadmap stops looking like a normal foundry roadmap and starts looking like a packaging roadmap. At ISCAS 2026, Huawei unveiled its tau (τ) scaling law, reframing process scaling in the time domain. τ is the time cost of data movement and processing: switching delays in transistors, RC signal propagation delays in circuits, compute, memory, and networking latency. Outside Huawei’s terminology, this is called system-technology co-optimization. This is Huawei’s answer to its lack of EUV lithography. Without EUV, planar density cannot keep pace with TSMC, Intel, or Samsung. If transistor density cannot shrink further, Huawei’s alternative is to shorten wires, reduce buffering, and stack logic vertically. “LogicFolding”, Huawei’s implementation of this new scaling idea, is, in practice, an aggressive 3D stacking approach. AMD V-Cache places SRAM above or below a CPU die. AMD’s MI350X places active interposer dies (AIDs) underneath accelerator and compute dies (XCDs), with the AIDs handling cache, IO interfaces, the network-on-chip (NoC) and embedded metal-insulator-metal (MIM) capacitors. With LogicFolding, parts of the same logic block are split across multiple active dies bonded face-to-face at ultra-fine pitch. This allows Huawei to shorten some critical paths and reduce buffer overhead, not merely add cache capacity or offload the IO and interconnect. Shortening wires is where the higher clocks come from. A large share of a modern core’s delay and energy budget goes into driving long interconnects and the repeater buffers along them. LogicFolding distributes a block’s critical-path gates across multiple stacked tiers bonded at a very fine pitch, so the bond interface behaves like an additional metal layer and the longest paths get shorter. That is how Huawei expects to recover frequency and efficiency it cannot get from the process alone. Huawei’s roadmap shows its intent. Prime core frequency is targeted to rise from 2.75 GHz in the Kirin 9030 to roughly 5 GHz by 2031, far beyond what planar scaling alone could deliver. Prime cores with 3.1 and 3.39 GHz clocks are being tested in its labs, although their power consumption is unknown. Beyond that, chips are in the design, simulation or pathfinding phase, meaning the frequencies are targets. However, the direction matters more: LogicFolding also helps with performance, not just density. The catch is that Huawei’s density claim is not directly comparable to foundry densities. A stacked design can report more transistors per package footprint by adding active layers, even if each patterned die remains well behind TSMC or Intel in front-end density. This is how Huawei can claim to reach foundry 14A-equivalent density by 2031. This is not a like-for-like foundry comparison, with Huawei using stacked logic and measuring density per package footprint. On a normalized Bohr-density basis, SMIC N+3 is ~114 MTr/mm², 38% less than Intel 18A’s HD library. Huawei’s 3D roadmap closes the gap by stacking active logic, reaching 215 MTr/mm² by 2030. In 2031, the roadmap density jumps to 295 MTr/mm², implying either a third active layer, partial EUV insertion or aggressive planar DUV scaling. Huawei’s methodology makes other foundries look much denser as well. Applying it to AMD’s MI450X with an N2 top die on an N3P base die yields a theoretical density of 460.2 MTr/mm² in 2026, compared with Huawei’s 295 MTr/mm² in 2031. This Kirin 9030 does not use LogicFolding, remaining in a conventional mobile SoC package. Instead, it forms the baseline for how far Huawei and SMIC can push planar scaling. Future teardowns of Kirin and Ascend chips will show both planar logic density and Huawei’s hybrid bonding solutions. Export controls changed China’s optimization problem rather than ending it. EUV restrictions raised the cost and complexity of leading-edge manufacturing without freezing it. SMIC reaches N6-class logic density through DUV immersion, SAQP and DTCO, while Huawei shifts more of the burden onto architecture, packaging and system-level integration. Future nodes will be tougher. N+3 still had room to tighten local metals and reduce cell height and CGP. Further scaling without EUV leaves fewer levers. More aggressive multi-patterning adds masks and overlay error. SMIC can keep pushing DUV, but each step will get more expensive and less forgiving. The design side is just as critical. Huawei had domestic EDA tools and flows before the Kirin 9030, with the Kirin 9000s, 9010 and 9020 making that clear. Huawei was able to ship multiple consumer SoCs on SMIC N+2 and N+3 while cut off from the Western EDA stack. US export controls restricted EDA tools for advanced chips in 2022 but did not target tools for more mature chips. In 2025, the US government briefly placed much broader restrictions on EDA software from Synopsys, Cadence, and others, before lifting them less than two months later as part of a trade deal tied to rare earths. Huawei has been unable to access those tools because it remains on a US trade blacklist. That forced Huawei, SMIC and Chinese academic institutions to build their own tools and flows. Researchers at Peking University recently announced a prototype EDA tool for Huawei’s LogicFolding architecture, which requires a new flow to handle the multilayer layout and floorplan. This is not the same as replacing the full Synopsys or Cadence stack, but it shows where domestic EDA is headed: toward tighter co-optimization between architecture, process and packaging. These advances are also diffusing into the Chinese ecosystem. SMIC is licensing its N+2 and N+3 processes to HLMC/Hua Hong at the government’s direction rather than by choice. If the same process learning feeds into Ascend accelerators for AI training and inference, the choke point shifts from one named fab to an ecosystem. Alibaba’s T-Head silicon arm and Cambricon, a Chinese AI chip designer that is expected to supply ByteDance, could also be major beneficiaries. Sanctions aimed at SMIC alone become less effective once the manufacturing knowledge has spread to other fabs and design houses. China is not closing the gap with Intel, Samsung and TSMC. The teardown shows the opposite in several places: no EUV, no backside power, higher process complexity, and visible trade-offs. But China is still advancing. If domestic chips become good enough for phones, inference, networking and security-sensitive workloads, they can matter strategically without matching TSMC at the leading edge. Behind the paywall, we show what else STEEL can do, with material and process flow analysis of SMIC N+3, and analysis of the Kirin 9030 package. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline, access the full Kirin 9030 and SMIC N+3 analysis or to commission a custom teardown, contact sales@semianalysis.com.
Double The VRAM Of An RTX 3070
Modern games are quite often limited by the amount of volatile memory available to the GPU. Games can require many gigabytes of data during the rasterization process. So the obvious solution for be…
Mizuho Raises CVS Health (CVS) Price Target on More Stable Policy Environment
With an annual dividend yield of 2.65%, CVS Health Corporation (NYSE:CVS) is included among the 12 High Yield Fortune 500 Stocks to Buy Now. America’s leading health solutions company, CVS Health Corporation (NYSE:CVS), provides advanced health care from pharmacy services and health plans to health and wellness. On June 8, Mizuho upped its price target on […]
Op-ed | Health plans take aim at independent dispute resolution cases; tips for providers
The number of Independent Dispute Resolution (IDR) cases between health care insurance plans and out-of-network providers has unexpectedly exploded since the
Opinion: When the Science Committee doesn’t science
A New Hampshire House committee's resolution on weather modification was based on bad science and ignored evidence. The resolution passed anyway.
Gas price solutions from around the world
While other countries have embraced renewable energy, President Donald Trump has doubled down on fossil fuels
Scientists Measure Earth’s Vast Underground Fungal Webs
With machine learning and a high-resolution imaging robot, scientists measured and mapped the extent of Earth’s carbon circulatory system.
MIT affiliates win 2026 Hertz Foundation Fellowships
Three MIT students and an incoming graduate student have won 2026 Hertz Foundation Fellowships. The fellowships in applied sciences, engineering, and mathematics recognize doctoral students who are pursuing solutions to the most pressing challenges in science and technology.
Soldiers have a new app for mortar firing solutions
Picatinny Arsenal says troops are finding the app easy to use and modern, picking up the upgraded system with little training.
Still Under Attack: A Decade of Monitoring Attacks on Health Care after the Adoption of United Nations Security Council Resolution 2286
Analysis in English on World about Protection and Human Rights; published on 11 Jun 2026 by Insecurity Insight
When policy impedes healthcare, what are the solutions?
Yes, there’s money on the way from the federal government. But communities and healthcare systems are also taking things into their own hands.
Unpacking Q1 Earnings: Accel Entertainment (NYSE:ACEL) In The Context Of Other Consumer Discretionary
The end of the earnings season is always a good time to take a step back and see who shined (and who didn’t). Let’s take a look at how consumer discretionary - gaming solutions stocks fared in Q1, starting with Accel Entertainment (NYSE:ACEL).
Young Scholars Invent introduces Houston students to digital health innovation at Rice
Seventy-eight high school students from across the greater Houston area gathered at Rice last month for the annual Young Scholars Invent program, a hands-on learning experience that challenged participants to develop affordable digital health solutions while gaining exposure to entrepreneurship, engineering and innovation.
Resolution honoring LGBTQ health center in Arlington rejected by Tarrant commissioners
County commissioners voted along party lines not to honor the HELP Center for LGBTQ+ Health.
Pritzker opens door to new Bears talks, blames team for stadium stumbles
Gov. JB Pritzker says he’s open to trying to come up with a solution to keep the Bears from leaving Illinois, including a special session of the Legislature.
EU Says Decision Not to Launch Siri AI in Europe Is Apple's Alone
The European Commission has responded to Apple's announcement that Siri AI will not launch in the EU, saying the decision is entirely Apple's and that the company sought an exemption from its legal obligations rather than a compliant solution. Commission spokesperson Thomas Regnier told reporters in Brussels (via Reuters) that Apple had failed to develop interoperability solutions meeting EU privacy and security standards, and instead asked to be let off the hook entirely.
macOS 27 Golden Gate Gains Native Ultrawide Display Support
Apple adds native ultrawide display support in macOS 27 Golden Gate, bringing higher resolutions and persistent display arrangements to users of widescreen monitors. The update allows ultrawide displays to run at resolutions up to 5K at 120Hz. Apple also says that display arrangements are now preserved across connections, so the layout automatically restores exactly as the user left it each time they plug in.
We can create the future of science right now
Paul Litvak is the founder and Executive Director of the Robyn Dawes Institute and a Visiting Scholar at UC Berkeley. He has a PhD in Behavioral Decision Research from Carnegie Mellon where he studied emotions and the sunk cost bias. Over 15 years in industry, he solved a wide range of challenging technical problems. At Meta he created models optimizing the ad review process. At Google he ran experiments to measure social influence. At Airbnb, he was a product manager leading machine learning teams optimizing search ranking and price suggestions. He also co-founded and led product at Rhythmic Health, a venture-backed biosensing startup, creating an accurate low cost system using a color changing strip and a smart phone to measure salivary lactate. The bottleneck At this point, it is uncontroversial to say that science needs to stop using the PDF article as the unit of knowledge and currency. The unbearable slowness of scientific publishing, the profit motive and margins: I’m not saying anything new. The PDF also sucks because it’s hard to extract structured information, which makes it hard to do evidence synthesis. As a result, we do much less evidence synthesis than is needed. And evidence synthesis ultimately undergirds most policy and medical decision-making. I can see second-by-second real-time odds for any sporting or newsworthy event, but a school board can’t see the best evidence on whether their 8th graders should be taught algebra. As a society, we don’t treat this as an important problem. Again, not controversial. Not only is the problem well understood, but the solution has already been laid out. What we need is AI-assisted living evidence synthesis - (1) an open knowledge graph of atomic claims, (2) claims linked to evidence, (3) assessment and synthesis of each piece of evidence, and (4) continuous updating with new data. What few realize (yet) is that the technical capacity to build this vision for a significant portion of science already exists. Not only that, scientists and startup teams are already building many of these components. I know this because I’ve been surveying the space and talking to many of the builders. There are some missing pieces: for example, evaluations of how well some of the components work. But at this point, most of what’s missing is a fully end-to-end working integration of all of these parts. In the rest of this essay, I’m going to lay out all the parts of a working living evidence layer for science and who is working on them, and propose concrete next steps for building this system. What’s now possible The diagram above outlines the components of a living evidence synthesis platform, including some of the teams working on each component1. Scientific PDFs are processed into claims with associated evidence. The evidence is subjected to a forensic audit, methodological evaluation and robustness and reproducibility checks. Finally it’s given a weight in a continuously updating synthesis. What follows is a description and status of each component and a few of the teams working on them. Document understanding The first thing you need to be able to do is turn an article into structured data. Mostly that means parsing PDFs. There are often multicolumn layouts that confuse non-specialized PDF to text processing libraries. For scientific papers, there is the added complexity of parsing formulas and tables and figures. This is a really hot area - there are startups offering APIs, and it seems like a new open source package gets posted to Github every few weeks. What follows isn’t exhaustive. A package called GROBID was the state of the art for a while, they didn’t update their package for nearly two years until very recently. In the meantime reducto.ai released an AI powered PDF extraction API, PaddleOCR became popular, IBM released a model called Docling, and both Mistral and Gemini created models and libraries. I also know of at least one other well-funded psychology research group working on a paper parser. By contrast, there are few open evals in this space, with no extensive evals for complex table comprehension in particular. Nonetheless, I’m confident this will be a solved problem soon, given the combination of LLM advances and developer interest. Hypothesis level extraction There has been increasing interest in comprehending the extracted text of papers and linking information to evidence for each hypothesis. A lot of work has already been done. Trialstreamer (Marshall et al. 2020) and RobotReviewer LIVE (Marshall et al. 2023) demonstrated automated extraction of trial population, intervention, and outcome at scale on clinical RCTs. PaperQA2 (Skarlinski et al. 2024) and Ai2 ScholarQA (2024) extended this to retrieval-augmented question answering with citation grounding. Elicit, Consensus, and SciSpace operationalized claim-level extraction for end users. OpenEval (Booeshaghi et al. 2026) is the most recent and most ambitious: 1.96 million atomic claims extracted from 16,087 eLife manuscripts using Claude Sonnet 4.5, grouped into ~299,000 results, with LLM evaluations showing 81% agreement with human peer review on a 2,487-paper subset. None of these solutions link claims to test-statistics, as you would need to evaluate randomized controlled trials. This is why I built the evidence.guide API - to extract hypotheses and associated test statistics from behavioral science papers. The best public eval of this kind of extraction I’m aware of comes from the recent SCORE project - they had humans code thousands of psychology papers to extract their claims by hand. It would be extremely helpful to the world if all scientific PDFs were available as structured open data. I’ve been working to make this happen, both directly at Berkeley and through coordination with large entities I can’t yet speak of; as hard as it is to do, I think it’s possible2. Forensic audit A lot of work has been done on forensic audit, but some gaps remain. Of course, for biology papers that rely on images for evidence, there are a variety of tools (notably Proofig and ImageTwin) to spot anomalies. These are still well short of what sleuths like Elizabeth Bik can do on her own, but these tools are constant companions among fraud analysts. There’s someone working on auditing Excel files for anomalies, and a number of teams are automating numerical checks like GRIM and SPRITE, including Scrutiny project, the INSPECT-SR team as well as statcheck. The regcheck team is building a way to use AI to compare preregistrations to analyses in papers, to ensure there aren’t significant deviations. Nonetheless, there are many other kinds of anomalies to screen for, both public and less publicly known. And there are no formal evals for anomaly detection that I’m aware of. Still, there’s a lot to draw from in this space and I’m pretty certain we will be able to scan papers for most kinds of obvious anomalies in the near future. Methodological review This area has been white hot, though I fear for many of the startups in this space, because this capability may become commoditized. There are at least six different AI peer review companies, including Refine.ink, Reviewer3, ReviewerZero.ai, Q.E.D. Science, Paper Wizard, and Isitcredible. Coarse (a pun on refine) was also recently created as an open source alternative. These systems provide qualitative feedback on the content of papers, spotting methodological weaknesses and mathematical errors. They seem to work pretty well, and many academics report bitterly that they exceed the average quality of typical peer reviewers. But there are few evals here either. What evals exist so far involve using LLM-as-judge (circularity problems abound) or comparing against human reviews of questionable quality. What you’d ideally want is an eval that measures capturing known errors in papers3. Reproducibility and robustness Another active area has been using AI agents to automate computational reproducibility4 and robustness5 checks in papers that report numerical results. For more recent papers where data and code are available, AI agents can see whether they can re-run the analyses and produce the numbers reported in the published paper. In addition to a handful of individual academics who have been experimenting using Claude Code for this, the Institute for Replication is a leading group working on building an end to end system. The evals related to this problem are the most mature, with CORE-Bench (Siegel, Kapoor, Narayanan 2024) and PaperBench (OpenAI 2025) available to benchmark agents on this task. There is also work on getting AI agents to test alternative ways of analyzing the data to ensure the results are robust to small analytic design choices. Synthesis This is the most underdeveloped area where significant investment is required. Although some automated evidence synthesis systems exist — for example, otto-sr is building an AI agent to write systematic reviews — none of these incorporate the full range of paper level signals to weight evidence appropriately. Nor is there anything like an eval or a gold standard for a good systematic review. Arguably Cochrane reviews are the closest we have to gold standard human systematic reviews, though I’ve heard academics in the know complain about their uneven quality. A key question for a synthesis platform is how to weight anomalies and methodological issues in assessing the quality of a piece of evidence. This is an unsolved problem and one I’m very keen to work on. Continuous updating There are many pieces of basic infrastructure available for monitoring for new research and initiating updates. OpenAlex is the current open citation graph. Retraction Watch integrated into Crossref in October 2023. Scite tracks how citations support, contrast, or mention prior claims. The Living Evidence Network demonstrated continuous-update workflows in clinical guidelines. Engineering this is a relatively straightforward task. When you look over this technical architecture and all the progress being made, it’s hard not to be optimistic that a living guide to scientific evidence will be built. The stakeholders are ready The social infrastructure for this is starting to coalesce — it’s not just a pie in the sky academic exercise to imagine this coming into existence. Institutions like the Center for Open Science, the Institute for Replication, the INSPECT-SR, the Living Evidence Network and more are all working on scaling work to improve research quality. Funders are also aligned. The Sloan Foundation has funded living evidence work through COS. Coefficient Giving supports the Institute for Replication and COS. The Astera Institute and the Institute for Progress have shown interest in this space. NIH has established an Office for Replication and Reproducibility. Although there are (very unfortunately) serious headwinds in science funding generally, there is an active group of funders interested in metascience. A brief word about what I’ve been doing at RDI. First, as a Visiting Scholar at Berkeley I’ve been actively figuring out how a non-profit and a public university can conduct and make public the results of large-scale academic article data mining. With some of the money I raised from donors, I commissioned a legal analysis of recent case law and publisher text data mining (TDM) agreements in order to understand whether a massive open data mining of academic articles is possible (with caveats, it is). I’ve also been working to bring together stakeholders in this space, and identify gaps. I’ve also been doing some software development in this space, with more to come. A pilot proposal The assumption undergirding all of this is that an AI, given all this information, would make the right judgment about a scientific claim with lots of conflicting evidence, weighing all the factors appropriately. That’s the hypothesis we need to test. Randomized control trial research is the best place to focus on first. RCTs are used to make many of the important decisions in society - from medical trials to public policy changes. And they use a relatively uniform set of inferential statistics with lots of known and available diagnostics. Behavioral science experiments, within the broader realm of RCTs, should be first used as a testbed whose results can be generalized. Because behavioral science is at the vanguard of open science practices, replications abound (there are thousands of them) to serve as ground truth training data. Key Hypothesis Therefore the pilot would test, in behavioral RCTs that have been replicated, whether the quality of evidence for a claim can be used to accurately predict whether that claim will replicate. Secondary Hypotheses Compared to claims that replicated, non-replicated claims demonstrate a greater share of forensic anomalies in their source literatures. Hypothesis level claim and statistic extraction is accurate enough to scale living evidence without onerous human review costs. Replication prediction is more accurate than prediction markets6 or journal prestige. If all the different quality signals we gather do accurately predict which studies will replicate, then we can use that model to score evidence to power the living evidence layer. Why this is informative regardless of outcome If the pilot succeeds, the architecture extends to medical RCTs (where Living Evidence already operates and integration is mostly about claim representation), then to slices of basic biology with stable replication structure. If it fails, the field learns which quality signals are load-bearing and which ones metascience has oversold. Either result is a contribution to knowing what the literature supports. Implications for funders Because this burgeoning ecosystem of builders already exists, a well-informed philanthropic or government funder could play a crucial catalyzing role in bringing this future about. They could play at least three roles: creating open structured datasets, publishing open benchmarks and incentivizing the solving of key technical challenges. First, open archives of papers that the government maintains, like PubMed, could be turned into structured data amenable to large scale metascience and claim aggregation. I know the US government already has an interest in doing this, though some key open questions remain unanswered. How do you determine the best models and systems for accurately extracting information from papers? How can you establish a robust way to allow researchers to flag errors and correct them? And finally, how do you create a legal regime in working with publishers to maximize the scope of available papers? For the latter, a university or a private philanthropy may be better positioned to make structured data publicly available under journal subscription terms or fair use. Philanthropists or government funders could also coordinate to create or commission benchmarks that evaluate whether important problems have been solved. For example, an open benchmark for claim extraction from a range of different scientific article types would be extremely helpful. Ensuring the underlying data are accurate is vital for creating these evaluations. I’ve discussed opportunistically using various human-created datasets for this purpose, but a consistent problem is that errors in human data make it difficult for them to serve as a gold standard. Finally, with structured data and benchmarks available, the government or private philanthropy could use them to incentivize groups to develop machine learning systems that meet these benchmarks. Prizes are one potentially valuable tool for this. For example, you could establish a prize for a system that accurately updates a living meta-analysis for a small set of claims. Prizes are particularly useful as signals of problem importance, and can help create vibrant ecosystems of public and private research—see, for example the role the government played in kickstarting the current work on nuclear fusion. Conclusion The drawbacks of the current scientific publishing system are known. Scientists agree, metascientists agree, philanthropists agree: the published PDF plus citation graph isn’t the right substrate for maintaining a representation of the evidence base in science. The pieces needed to build the alternative either already exist or are rapidly taking shape. The community is forming around exactly this problem, with concrete partnerships and shared infrastructure. A pilot should start on behavioral science RCTs because that’s the slice of empirical science most amenable to legibility, where replication ground truth is richest, and where the failure modes are best documented. What’s been missing is the galvanizing mission to assemble these pieces into something that works. That’s what I’m proposing to build. *** 1 I have a broader field map that I’ll release publicly soon. This is me, building in public! 2 If this is something that you are excited about, please reach out and talk to me. 3 More on this very soon too! 4 This tests whether, given the code and the data, you can get the same statistics as reported in the published paper. 5 This tests whether the results are the same as a paper’s given alternative analytical decisions in conducting the analysis (like outlier omission). Closely related is the idea of a “multiverse” where you come up with many different ways of answering the same underlying research question with the same data, and test whether the results hold in all those alternative methods. There’s been work on the latter as well. 6 Some of the replications, e.g. those from the SCORE project, had paired the experiments with forecasts from prediction markets. So we get to look at this for free.
U.S. teens are getting their least amount of sleep in decades—lowering their chances to 'lead fulfilling lives as adults,' health experts say
Teens are getting less sleep each year, which can impact their mood, physical well-being and school performance, experts say. Here are solutions they recommend.
NYU Launches Earth Systems Institute
Interdisciplinary science and tech hub aims to develop pioneering solutions for a changing planet
A science-driven journey to "safe food everywhere"
This year’s global theme for World Food Safety Day, “From burden to solutions – safe food everywhere,” is a call to action that reflects our core belief at Mars: if it’s not safe, it’s not food.
Overwhelmed or burned out? How to know, according to a psychotherapist
Burnout and overwhelm are often confused leading to the wrong solutions. How to know the difference, according to a psychotherapist.
The one tool small businesses shouldn’t overlook this year
Business-grade managed WiFi is an essential tool and one that small businesses should not overlook. Cox WiFi offers reliable and secure solutions.
A Science Based Look at Fluorination and PFAS.
Are all fluorinated packaging technologies created equal? Or are we oversimplifying risk? Greif examines how process chemistry, particularly oxygen control, fundamentally shapes PFAS outcomes. Backed by validated data and scientific rigor, this paper reframes barrier selection for regulators, engineers, and decision-makers seeking compliant, high-performance packaging solutions.This Technical Paper is brought to you by Greif.
Get certified for free in youth mental health first aid training
Rise Community Solutions and NAMI Central Florida are holding a free, evidence-based certification course.
What's next for the War Powers Resolution on Iran? PolitiFact explains
The House and Senate have advanced war powers resolutions aimed at curbing President Donald Trump from continuing the war in Iran. Can a 53-year-old law make a difference? What steps would be required to end the war? PolitiFact explains.
Ramtech VP of Business Development Kelly Williams to Speak on Modular Construction Benefits in Panel Discussion at 2026 InterFace Houston Multifamily Conference
Ramtech Building Systems, Inc., a leading design-build provider of permanent and relocatable modular building solutions, today announced that Vice President of Business Development Kelly Williams will serve as a panelist at the 2026 InterFace Houston Multifamily Conference. The one-day event takes place June 9, 2026, at The Briar Club in Houston, Texas, and will bring together multifamily developers, owners, investors, architects, contractors, and other industry professionals to examine trends s
AJ Patton
Scope of work: A.J. Patton founded 548 Capital and 548 Development to help transform communities and their impact on the planet, developing solutions for the housing, environmental and economic issues facing inner cities. In 2022, he combined the firms into 548 Enterprise.Biggest professional win: 548 Capital rehabilitated a once-decrepit 79th Street building into a sustainable project with 28 affordable units, each with energy-efficient lighting, high-performance windows and state-of-the art HVAC systems, and it will soon include solar photovoltaic rooftop panels.Other contributions: Patton, a member of Crain's 40 Under 40 Class of 2022, is a member of the American Council on Renewable Energy’s Accelerate program, the Chicago Business Leadership Council banking and finance co-chair and a member of the World Leaders Forum board.Crain's 40 Under 40 Class of 2022
Oakland Athletics Announces Multi-Year Partnership with Adidas and BSN Sports
ROCHESTER, Mich. – Oakland University Athletics has officially signed a multi-year contract with adidas, with BSN SPORTS positioned as the exclusive supplier of uniforms, apparel, footwear, accessories, and equipment for all 18 Golden Grizzly varsity programs through the assistance of College Sports Solutions.
Uber's AI training gig work offers good pay but lacks stability
Uber AI Solutions pays up to $150 an hour, contractors said. The AI training work doesn't involve onboarding and hours can vary from week to week.
Weed removal business helps local find the right path
FAIRMONT – While the Curly Leaf Pondweed issue in Fairmont has affected many, removing it has helped one resident stay clean and keep the lakes clean. Dominic Hill of ClearShore Solutions said he was a troublemaker in his younger years and struggled with drug and alcohol addiction. That all changed four years ago when he […]
$13 Million Gift Creates Cedars-Sinai Holoman Health Equity
Learn more about the $13 million donation from Eric and Terri Holoman to Cedars-Sinai that will seek solutions to systemic lapses in equitable healthcare.
FIA and Liberty push to find F1 2027 engine solution to be approved over Spanish GP
New fuel flow increase limits could salvage proposed tweaks to the 2027 engine formula following objections from Ferrari and Audi
BevNET Live: Everwell Health showcases science-backed functional beverage ingredients
Wellness ingredients supplier Everwell Health will be showcasing its “Ingredients for Life” portfolio of functional beverage solutions for caffeine-free energy, concentration, protein, and weight loss at the upcoming BevNET Live event next week in New York City, US (June 10–11). Everwell Health experts will be present at the show, highlighting how the company’s ingredients can help formulators create differentiated beverages that meet growing consumer demand for convenient, multifunctional, and health-focused beverages.
Hospitals Are Leading Efforts to Make Health Care More Affordable
Affordability is front and center in conversations across the country, as Americans feel pressure from the rising cost of living and policymakers search for solutions. Hospitals and health systems share their concerns because we see the impact of high costs every day on the patients and families we serve. Hospitals are not waiting to do their part. Across the nation, they are already implementing efforts to make healthcare more affordable and accessible, as well as providing solutions that could lower costs across the entire health care system.
GKBA: Business Growth, Technology & Innovation with ITva Technologies
On this episode hosted by Carlos Ribero, Chairman of the Greater Kendall Business Association, guest Maricel Miranda, Director of Business Development at ITva Technologies, joins the conversation to discuss business growth, technology solutions, and innovation in today’s evolving marketplace. They explore how businesses can leverage technology to improve efficiency, strengthen operations, and remain competitive in
Ohio Senate passes resolution to put voter photo ID amendment on Nov. ballot
The Ohio Senate has passed a resolution that would put an amendment on the November ballot, one to require voters to show photo ID at the polls.
DC Wrap: House passes war powers resolution; Trump 'perturbed' by Netanyahu
A look at the day's biggest stories in national politics
House passes resolution for first time to halt military action against Iran in rebuke of Trump
The House approved a war powers resolution that would halt the U.S. military action against Iran, defying the president as a handful of Republicans joined with Democrats to end the three-month-long war that has reordered politics at home and abroad.
House approves war powers resolution to halt military action against Iran
The measure passed with bipartisan support
House passes Iran war powers resolution in rebuke to Trump
The House passed a resolution on Wednesday to limit President Donald Trump’s war powers in Iran, a significant rebuke to Trump and his handling of the conflict.
In a first, House votes to block Trump from ordering further strikes on Iran
The Senate advanced a similar war powers resolution last month on a procedural vote, reflecting growing impatience with a conflict Congress hasn’t authorized.
Involuntary commitment bill targeting mental health, crime passes NC House
A bill that's part of the state legislature's efforts to ramp up the number of criminal suspects involuntarily committed to mental hospitals passed, despite criticism that it proposes few immediate solutions.
Satellite science: FSU research increases accuracy of high-resolution ocean surface measurements
Florida State University research published today in Science Advances demonstrates a new framework for predicting the motion of kilometer-scale underwater