SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " busy " 543 found 🔀 AI-powered Shuffle
‘People are busy trying to survive’: Wood County residents share concerns ahead of the midterms
Ahead of the midterms, Wood County residents discuss job losses, education, political apathy and what they want from elected leaders.
Pope hope, that’s entertainment, and getting ahead in the CIA
Happy Friday friends, I want to start by just breathing for all of us a big long collective sigh of relief at the news this week that the pope’s doctors have basically blown the all clear for Leo’s health. Going from knowing nothing to him declaring to the world he needed surgery, to a cancer diagnosis, to bouncing out of the hospital in barely even days, to ringing the bell in less than two weeks is whiplash inducing. But in the best possible way. We are living in a world in which the Roman pontiff, by dint of history, biography and circumstance, is once more at the epicenter of global affairs. Not just conversations about religion, or Christian and post-Christian values, but the bleeding edge of the most pressing issues of human affairs. Think I am exaggerating a touch? Consider the images of the crowds who greeted Leo in Paris just weeks ago, and juxtapose them with the absolute photo negative scenes unfolding there recently. Ask yourself how many world leaders are talking about AI right now and directly citing the pope as they do so. Try to name a country who has had as many top-ranked diplomats in and out of both Russia and Ukraine in the last three years as the Vatican has in the last three months. It has been fascinating to watch Leo XIV emerge as not just a kind of pop culture reference point or totem to be cited (Francis was often name-checked this way) but as a kinetic force in global conversation. Given the state of things, we need global figures of gravitas and values, even better if they have real wisdom behind what they are saying. So news of Leo’s illness was, it seemed to me, a tremor with potentially Richter Scale implications. That not only has the worst not come to pass but instead we’ve had the best of outcomes announced is something to really be grateful for. Humanity, it seems to me, is entering one of its irregular but cyclical phases where the pace of change — technological, social, and geopolitical — outstrips the ability of previously settled norms and received wisdom to cope. Such periods – and I think the first decades of the last century were a similar such time – throw into question the viability of all kinds of institutions. And many of ours have been straining to breaking point for a few years now. The papacy has the power and the potential to be a steadying pole in all of this. That’s my hope, anyway. It’s a lot to freight the office with, though it is arguably its ultimate purpose from its founding, to be a steadying rock on which all that matters can be anchored. It’s also, of course, an intolerable weight of responsibility to place on a single man. But I am encouraged to have hope in – and for – Leo. The apostle whom he succeeds, after all, was famously unequal to some moments, failed some tests of faith, and resiled from taking the road which led ultimately to the circus on Vatican hill. Human frailty and limitations, of health, of character, of temper, can open us to Christ, whose strength is greatest in our weakness, so St. Paul learned. That gives me hope, and I am sure it consoles Leo, too. And so I will continue to pray for him. Because we need apostles of rock right now. Here’s the news. Subscribe The News The Dicastery for the Doctrine of the Faith issued yesterday a new document “Venite ad me: Considerations on the Transmission of the Faith in an Epochal Change.” It’s not a short document, and it is at pains to stress this isn’t a doctrinal note from the dicastery, either. Rather, it brings together reflections on an important issue from the Church around the world. Some of it I actually found really rather powerful. It is, however, 25,000, which is a lot for a busy reader to get through on a weekday. So, you can read our busy reader’s summary right here. — News broke yesterday of an Oct. 22 meeting of U.S. bishops with President Donald Trump. The meeting was organized by an official at the Heritage Foundation, according to several sources close to the meeting. Video of several U.S. bishops praying in the Oval Office over President Trump was posted on social media Thursday afternoon, first by White House Communications Advisor Margo Martin, and then by the official twitter.com account of the Archdiocese of Denver. The meeting has drawn sharp criticism because of its proximity to the upcoming midterm Congressional elections, in which Democrats are widely expected to win control of the House of Representatives, while control of the Senate remains closely contested. Sources close to the bishops’ conference told The Pillar that some USCCB senior officials were surprised by the existence of the meeting when video of it first emerged online. And a source close to conference president Archbishop Paul Coakley of Oklahoma City told The Pillar that the archbishop was “deeply frustrated” by the occasion of the meeting. An official conference spokesperson told The Pillar that the meeting was “not organized with or by the USCCB” and was “not affiliated with the conference.” You can read the whole story here. — The next National Eucharistic Congress will be held in Indianapolis in 2029, a return to the city that hosted the last gathering in 2024. You read it here first. By here, I don’t mean this newsletter, I mean at The Pillar. We broke the story this week. It’s a big deal, in as much as the last congress was a roaring success and the next installment has the potential to be a real focal point for evangelizing efforts in the coming years. Read all about it here. — As Pope Leo prepares for the longest trip of his pontificate, Church leaders in Uruguay say the pontiff will encounter a highly secularized culture, in a country with a very different Catholic history than many of its South American neighbors. The nation has not had a papal visit since 1988, and leaders who spoke with The Pillar say it has a dire need for evangelization, even amid the prospect of a small revival in faith. This is real reporting on the Church in the country, and frankly a story you simply are not going to be able to read anywhere else. Read the whole thing. — The Archdiocese of Detroit announced this week a plan that would see the vast majority of its parish priests reassigned next summer, amid a restructuring process expected to dramatically shrink the number of parishes in the archdiocese. Archbishop Edward Weisenburger said this week that the plan “asks much of our priests,” but is a “sacrifice they are making as brothers of one, unified presbyterate.” The thing is, as JD pointed out in an analysis yesterday, pastors of parishes have a legal right to stability in office, so the only way this kind of wholesale reassignment goes ahead is if all of the archdiocesan clergy agree to resign. That creates its own kind of legal issues, though, and re-raises longstanding questions about the effectiveness of canonical due process protections for priests when dealing with coercive exercises in authority. Read the whole thing here. — More than three months after the Dicastery for the Doctrine of the Faith issued its decree declaring the excommunication of the leadership of the Society of St. Pius X, questions remain about the full effects of the society’s schism. Specifically, the DDF’s July claim that marriages witnessed and confessions heard by SSPX priests are now invalid remains contested — and it emerged this week it appears that the Vatican’s own legal experts don’t agree. You can read my whole analysis of the situation and what it means here. All I would add is that the DDF’s undeveloped, some would say unsubstantiated, claim about the invalidity of some SSPX sacraments came in their July Explanatory Note on the schismatic consecrations by the society that month. It touches directly on both papal acts of governance — indeed it purports to nullify them — and the most intimate pastoral encounters possible in a parish setting. If there is one aspect of the Francis-era style of governance I would like the curia to finally cut out, root and branch, it would be these attempts to try to effect extraordinarily sensitive legislative acts via a note. — At least a dozen French bishops have spoken out following an eruption of violence on the country’s streets Oct. 17. Not surprisingly, they unanimously condemned the violence, but the length and content of their interventions varied significantly. Several sought to distinguish between the actions of rioters and what they suggested were the legitimate concerns of peaceful young protesters. Many also evoked Pope Leo XIV’s Sept. 25-28 visit to France, suggesting it offered a powerful counter-image to the scenes of looting and destruction. A number of bishops also stressed their solidarity with law enforcement officials who struggled to contain the disorder, as well as the owners of the roughly 3,000 damaged or looted businesses. What’s the background to the nationwide unrest that the French media calls “les violences du 17 octobre”? And what exactly are the bishops saying? Read all about it here. — A Polish bishop called for the firm defense of unborn children as well as compassion for their mothers this week, as the lower house of Poland’s parliament passed two bills seeking to liberalize the country’s abortion laws. The bill on decriminalizing assistance in an abortion passed by 217 votes to 213, while the abortion in cases of fetal abnormality bill passed by 233 to 203, thanks to the government’s majority in the lower house. Both bills will now move to the Polish Senate, the upper house of parliament, where the ruling coalition has a larger majority. The fetal abnormality bill is symbolically significant because if it became law, it would effectively overturn a 2020 ruling by Poland’s Constitutional Tribunal that a 1993 law permitting abortion for a severe and irreversible disability or a life-threatening incurable disease was unconstitutional. Read the whole story here. Subscribe **[The St. Paul Center App | Bible Study On-The-Go Read and understand the Bible with St. Paul Center’s new app! With today’s leading Catholic Scripture scholars as your guides, the St. Paul Center app empowers you to read the Bible](https://stpaulcenter.com/app?utm_source=pillar&utm_medium=email&utm_campaign=applaunch)** from the heart of the Church. Download the app for free at either the Apple or the Google app stores. https://stpaulcenter.com/app That’s entertainment I have written before about my deep and sincere reservations about the celebrity exorcist subculture which has taken root in American Catholicism. And, because I am very ill at ease with the entire thing, I try to keep a weather eye on the phenomenon without being drawn into the kind of online back-and-forth which these figures sometimes generate. Earlier this week, JD noted that one such celebrity exorcist type, Fr. Chad Ripperger, has undertaken, on the request of his bishop, a year’s fast from interviews and public speaking. I’m sure that will be salutary for him, if for no other reason than that receiving with docility requests from one’s rightful ecclesiastical superiors always comes with graces. Then a second thing happened this week which caught my eye. Apparently, another fixture in the celebrity exorcist world, Fr. Carlos Martins, has initiated a lawsuit against two lay men — apparently associates of Rippenger, though I am unclear in what way, exactly — for allegedly defaming him and his ministry on a podcast. It seems the suit was initiated nearly a year ago and is now pending. At issue, I read, is that the two men described Martins on a podcast as “not who he says he is” with regard to his exorcism ministry and that he “doesn’t know what he’s talking about.” These statements Martins considers to be false and defamatory and, his suit claims, “directly affected the sale and reception of [his] The Exorcist Files book that was newly released at the time these episodes aired.” I don’t want to get too into the weeds of the details here, but a couple of things struck me about all this.
HOMETOWN ENTERTAINMENT: Halloween events fill the region this weekend
Busy weekend of Halloween-themed events, including ZOO Boo at Mill Mountain Zoo
Xbox cloud gaming prices revealed, with 50 hours of ad-free game-time priced $11.99
Prices for Xbox cloud gaming revealed. But even paying won't protect you from wait times if servers are busy, apparently.
Proposed business district would put the Arts District’s future in property owners’ hands
The once-niche creative refuge of Downtown Las Vegas has transformed into a busy local hangout, but the neighborhood’s business owners, residents and artists are asking a familiar question: Is this place still for us?
Van Orden discusses Second Amendment, fuel prices
LA CROSSE (WKBT) -- Rep. Derrick Van Orden joined the Wisconsin Firearms Owners Association to discuss the Second Amendment. He also addressed rising fuel prices ahead of the busy holiday
FEST 24, Boo at the Zoo lead Gainesville events this week
FEST 24 and Boo at the Zoo headline a busy week of entertainment in Gainesville/Alachua County, with plenty more events and activities on the calendar.
ChristianaCare opens Health Center, completing next phase of Aston campus
Plus, Ridley’s Goodwill store to reopen, Delaware County Down Syndrome Interest Group merges with The Down Syndrome Association of Delaware, library book sale, Christmas bazaar, Birding Club walk, and enough events to keep you busy…
Pirates have another offseason trade idea with Astros
The Pittsburgh Pirates should be busy on the trade market this offseason.
1.7K views · 25 reactions | ON-ORBIT SCIENCE🔬 Astronaut Anil Menon...
ON-ORBIT SCIENCE🔬 Astronaut Anil Menon welcomed the arrival of a SpaceX cargo capsule at the International Space Station as the crew kicks off a "busy season of science." Menon said they are...
DK Metcalf very busy in Week 6 OT win
DK Metcalf tied his career high in targets, earning 15 - and catching 11 - in Week 6 against the Buccaneers.
Talk Business & Politics: Analysis of Talk Business & Politics-Hendrix College poll
It’s been a busy week of polling as Arkansas took a focused approach to the November midterm elections ahead.
Talk Business & Politics: Analysis of Talk Business & Politics-Hendrix College poll
It’s been a busy week of polling as Arkansas took a focused approach to the November midterm elections ahead.
Talk Business & Politics: Analysis of Talk Business & Politics-Hendrix College poll
It’s been a busy week of polling as Arkansas took a focused approach to the November midterm elections ahead.
Talk Business & Politics: Analysis of Talk Business & Politics-Hendrix College poll
It’s been a busy week of polling as Arkansas took a focused approach to the November midterm elections ahead.
Capitol View: Analysis of Talk Business & Politics-Hendrix College poll
It’s been a busy week of polling as Arkansas took a focused approach to the November midterm elections ahead.
Capitol View: Analysis of Talk Business & Politics-Hendrix College poll
It’s been a busy week of polling as Arkansas took a focused approach to the November midterm elections ahead.
Learn Why The Bull Case For Madison Square Garden Entertainment Stock Could Change Following Revenue Jump
Madison Square Garden Entertainment reported revenue of US$1.1b, up 13% year on year, supported by the New York Knicks’ NBA Championship run and record sales for its Christmas Spectacular. The 30 day Harry Styles residency now under way at the Garden underscores how concentrated, high profile bookings can deepen event utilization across an already busy venue portfolio. We will look at how Madison Square Garden Entertainment’s investment narrative is affected by this 13% revenue jump and...
Top Stories: Apple HomeView, New Apple TV and HomePod mini, and Sold-Out iPhone Duo
It was another crazy busy week for Apple, headlined by Tuesday seeing the company take the wraps off of several home-related products as part of a "Welcome home" launch wave.
Gaston’s science department launches rock collecting project
By Caylie Moore, Features Editor Since the beginning of the school year, Gaston High School students have been working on a pen pal project — but don’t underestimate the point of this assignment, Features Editor Caylie Moore cautions. This project is no ordinary exchange of simple letters, nor unnecessary busywork for a drawn-out English class, […]
An Amazon 'science fair' and quashed legislation: A busy day for debate on Trenton data centers
On Thursday, Amazon hosted an open house about its potential 600-acre data center in St. Clair and Madison Townships. Trenton City Council also voted to withdraw several pieces of legislation proposing financial benefits for residents that would only take effect if voters reject Issue 17.
Cardiology’s busy year: Compensation, productivity, imaging volumes and TAVR cases all on the rise for heart specialists
Cardiologists appear to be thriving in the face of adversity. Even as the specialty juggles an aging population, a workforce shortage and unfavorable reimbursement policies, compensation and productivity continue to climb.
Radial Entertainment Orders 'Making A Serial Killer' Season 3
Radial Entertainment has ended a busy week on the Croisette with a Season 3 order for 'Making a Serial Killer.'
Radial Entertainment Completes Busy MIPCOM Week With ‘Making A Serial Killer’ Season 3 Order
EXCLUSIVE: Radial Entertainment has had a busy week on the Croisette and just finished it off with another order. The global distribution biz has greenlit a third season of its original series Making ...
Busy Philipps shares health update after brain tumor diagnosis
Busy Philipps, who was diagnosed with a brain tumor, opened up about the health scare during a recent appearance on the \
You Bought AI to Save Time. So Why Are You Busier Than Ever?
AI improves productivity only when leaders fix the underlying business system, delegate outcomes effectively, and stop managing every task.
Market on Main opens for business
Wilcox Furniture has been closed since last December, however the 12,000-square-foot historic building on Main Avenue that housed the business for 73 years is getting a new lease on life. Sitting in her new store, dubbed “My Kids’ Closet,” a children’s clothing consignment store, building co-owner Lindsey Schoneman reflects on how busy the last 10
PUBLISHER’S NOTE: Busy Fall
We have a busy fall ahead of us—and that’s always good news. We like to stay busy. We’re working on two special annual publications: the CNY Business Guide and the CNY Winter Guide. Both publications are designed to reach specific audiences in the community. We’re excited about these new editions and would like to share a few details about them. Let’s begin with the Winter Guide. Winter can be challenging, but it also offers plenty to celebrate. The new CNY Winter Guide will help readers embrace the season and make it more fun and enjoyable. This year’s annual publication will feature an extensive calendar of events, compelling stories, and curated lists of things to do and see throughout the winter. This will be our 31st annual issue. It is one of the few publications—if not the only one—devoted exclusively to winter in Central New York. For advertisers, it offers a valuable opportunity to reach readers across the region. As we tell prospective advertisers, one ad works for them all season long. Rates start in the low $200s. The guide will be available at hundreds of high-traffic locations, including all Wegmans stores and select Price Chopper and Tops Friendly Markets locations. It will also be available online, with every ad hyperlinked so readers can click directly through to the advertiser’s website or Facebook page. Our network of drivers will also deliver the guide to hundreds of high-traffic locations several times throughout the winter. The publication will be out by Thanksgiving. The CNY Business Guide is a one-of-a-kind publication that many readers use as a reference. Unlike the books of lists published by business journals across the country, it comes in a glossy, full-color magazine format. It also ranks employers in four counties, with a particular emphasis on Oswego and Onondaga and substantial information about Cayuga and Jefferson. It is an ambitious project that requires extensive research, phone calls, careful fact-checking, writing and design. In short, it takes a great deal of work—and we’re glad to take on the challenge. The guide is widely distributed to business and professional readers throughout Central New York. The Business Guide gives companies an excellent opportunity to highlight their growth and expansion, showcase new products, and share other noteworthy developments. For readers, it provides a valuable snapshot of companies across the region, including what they do and who leads them. The guide will be published in early December. We invite companies to advertise in both publications. Advertising costs are relatively low, and each guide offers access to a broad audience across Central New York. Wagner Dotto is the editor and publisher of Oswego County Business Magazine.
HOW I GOT STARTED: Jim Brooker
Owner of Starlight MFG Solutions in Fulton was vice president at Otis Technology in Phoenix — until the company closed locally. He then decided to open his own shop. “We are pretty much doubling in size each year so far,” he says By Stefan Yablonski Q: When did you start this business” A: I started Starlight MFG Solutions LLC while I was working at another government contractor. I was vice president of engineering at Otis Technology at their Phoenix location until they closed that facility due to a shift in business at the end of 2023. While at Otis, I was also working on Starlight on a part-time basis. I gained a lot of exposure to a lot of different equipment. That is the kind of service we provided to Otis when we were a part of them. Now we have spun that whole concept off here. Q: How would you describe it? A: It’s a manufacturing engineering firm specializing in custom automation to serve as an outsourced engineering support for companies that need additional resources. I want to make it a sustainable business that can partner with local manufacturers to help them. Q: What is your background; did you go to college with this in mind? A: I am a graduate of Rochester Institute of Technology with both a bachelor’s and master’s degree. My B.S. from RIT was in manufacturing engineering technology and my MS from RIT was in manufacturing and mechanical systems integration with a minor in business. Q: Why this type of business? A: I identified a large gap in the market for companies that needed small to medium help with manufacturing projects. Q: What services do you offer? A: We are focusing more on manufacturing. We do a lot of robotics, we do laser marking, we do filling — pretty much anything that the customer needs. Q: Have you seen any growth since you started? A: Yes. We have been growing ever since the company started. Our specialties include robotics, vision inspection and guidance, rotary-indexing workcells, dispense systems, laser marking, machine tending and more. We provide support to companies that need additional resources. We moved to a facility in Fulton about a year and a half ago. We are leasing our space in Fulton — the former NET & Die facility. We bought our own equipment, we are leasing the space. We have been operating here since early 2024. Q: You’re ready to take on bigger jobs? A: We want to stay in the small to medium size market where the large players don’t want to play. That is kind of where we found our niche. We are expanding regionally to take on more of those projects. My customers are relatively small business. They don’t have in-house automation; engineering and development teams are not feasible. Q: Business has been doing well? A: I am pretty satisfied about where we are at. We are definitely growing year to year. We are pretty much doubling in size each year so far. We are self-sustaining. Q: How busy are you on any given day? A: How busy? That’s kind of relative. We average between three and five projects going on in the shop at any time. We have a backlog that is manageable. We have seen a great demand for laser marking. The work is very relationship-driven. Much of it is based on referrals from other customers. Q: So, you must have a pretty big staff? A: No. I have just one other full-time person, a colleague from Otis. I bring in other people as the projects dictate. I handle sales and the overall operation of the manufacturing processes. We use outside sources for some work. We aren’t afraid to take on the other jobs — but we are filling our niche pretty well. Q: Do you get tired? A: I don’t get tired, no not really. Before this I ran a facility in Phoenix for 12 years. I enjoy solving problems and that part of the job is still my favorite. I have a supportive family life at home that definitely helps a lot. I just love the challenge of it. Q: Do you still live in the area? A: Yes. I live in Phoenix, town of Lysander. Q: What is the biggest job you’ve done? A: We have done some that were pretty good size. I don’t want to get into dollar amounts, don’t want to share gross revenue. We try to use locally sourced components. It is just amazing the components you can find that are locally produced.
PROFILE: Ben Sio
New President of CenterState CEO Brings Nearly Two Decades of Experience to Drive CNY Growth By Stefan Yablonski Ben Sio serves as president of the CenterState Corporation for Economic Opportunity — or CenterState CEO. The independent Syracuse-based nonprofit is committed to creating inclusive, equitable and sustainable economic growth in Central New York. “I started in this position in March, so it has been six months. I’m in my 19th year with CenterState,” he said in August. As president, he is responsible for overseeing the organization’s administration and governance, while leading and executing its vision to be an effective advocate, exceptional employer and a force for positive outcomes for the community. He previously served as chief of staff and senior vice president of strategy, policy and planning, overseeing the organization’s long-term strategic planning, consulting, corporate governance, fundraising and development, land-use planning and government relations. In his years with the organization, Sio has led or supported many high-profile strategic initiatives including the creation of the CNY Rising Plan, the launch of the NUAIR Alliance and the region’s UAS strategy, the creation of the Micron-enabled Community Priorities Document and the recently awarded NY Smart I Corridor Tech Hub. “When we decided to split Rob’s [Simpson] role into two positions, he has the CEO title and I got the president title. Rob remains focused on forward looking vision strategy for the organization and I’m more focused on the day-to-day operations,” he explained. “I’m also responsible for building consensus around strategic needs and priorities and managing the change necessary to drive execution. It’s an eventful job. “The experiment that we call CenterState is always evolving and shifting and addressing where we see market demand and market failure. “If we see something in our economy that isn’t going the way we think it should go, then whether it is housing development or workforce development or something else, we are always figuring out how to step into these situations and address those challenges.” “We are the largest ever in terms of staff that we have ever been. We are no longer the 20-person organization we were when we started out many, many years ago,” he said. “There are more day-to-day things to take care of. But also there is just so much happening in the community right now that is pulling CenterState and our expertise in so many directions. I tell people if we were bored and not busy, then I’d be really concerned about what we are doing. But we are not bored. We’ve certainly got our hands full — and that is a good thing.” CenterState has now approximately 63 employees on its staff, according to recent nonprofit database records. It’s involved in myriad programs, ranging from Genius NY, a business accelerator competition for uncrewed systems, IoT and robotics startups, to CenterState Up Start, a collaborative business development program that connects local, service-based businesses and aspiring entrepreneurs to the tools and networks that help them thrive. CNY Guy Through and Through A Central New York guy through and through, Sio was born and raised in Skaneateles. “My mom was a teacher, an art teacher. My father worked for many, many years with National Grid. He was there through the transition from Niagara Mohawk to National Grid,” he said. “Neither of my parents were touched by cutbacks and job loss. But I grew up going through that transition and being concerned that there were rounds of layoffs. My childhood connection to the economy here in Central New York … years ago it was on the decline. There were people that lived here that were concerned about losing their job. They were thinking they lived in a place that didn’t show much promise.” That narrative translated to his generation, he added. “The kids that grew up in the ‘90s in Central New York were very much told, directly or indirectly, by their parents, that they had to go somewhere else to find economic opportunity. That is what I grew up thinking,” he said. “I only went a few miles down Route 20 for college — in Geneva, New York; I graduated from Hobart and William Smith College with a bachelor’s degree in public policy and political science. “I got real interested in regional economies; because what makes regional economy is what makes the economy successful. And when I graduated, I had an opportunity to move to Washington, DC and work down there at a nonprofit doing this work.” However, he decided to stay in Central New York. “I got hired two weeks after I graduated. I got hired by the Greater Syracuse Chamber of Commerce. At the time it was one of two entities doing economic development in Central New York — [the Greater Syracuse Chamber of Commerce and the Metropolitan Development Association] — and it eventually became CenterState CEO,” he said, referring to 2010 merger between the two organizations. During his time at CenterState, Sio has also split time at the Brookings Institution in Washington, D.C., where he supported communities developing export and foreign direct investment (FDI), a long-term cross-border investment where an individual or company from one country buys a lasting stake or control in a business located in another country. The program — known as Global Cities Initiative — was designed to help leaders in major U.S. and international metropolitan areas reorient their local economies toward global markets. “Early on in my tenure at CenterState, we had done a lot of work with the Brookings Institution, just regional planning stuff. We worked with them on developing a regional export plan, to export more products out of Central New York and a larger business plan for the region. They hired me on to help replicate those plans in different parts of the country,”Sio explained. “So, I worked there for three or four years. I worked for CenterState, but I was technically loaned to Brookings for a period of time to help them do this work elsewhere.” Family ties “My wife is Carly. We have been married 14 years. We have two kids, a 3-year-old and a 7-year-old. “With a 3-year-old and a 7-year-old, fun is a relative term these days. We do a lot of hiking. The kids this summer got very interested in waterfalls. We’ve hit every waterfall we could in a short hike — we’ve done Skaneateles and some others.” “I do woodworking and wood turning — it’s a branch of woodworking; you use a wood lathe. My big thing there is making wood bowls. I do that in most of my free time, which is not much,” he quipped. “I like to get into my woodshop and make a bowl and decompress and turn off the rest of the world for a little bit. I usually do it late at night when the house is quiet. It is definitely my escape from the day to day. I make a lot of bowls; all different sizes, all different species of wood. It’s a fun thing to do for me.” He gives away many of his creations. “They are mostly gifts — I don’t really sell them. I really don’t have time to go set up a booth at a fair or craft show. I usually give them away. I donate them to different things. If you are in my periphery, you’ve likely received a salad bowl from me as a gift. I just need to find something to do with all the stuff that I create,” he said. Lifelines Name: Benjamin Sio Position: President, CenterState CEO Birth Date: Not provided Birth place: Syracuse Residence: Westvale Education: Hobart and William Smith Colleges in the Finger Lakes Affiliations: Member of the boards of Skaneateles Festival, Greccio Foundation, Interfaith Works, CNY Community Foundation Personal/family: Married with two kids Hobbies: Woodworking and woodturning
BUSINESS UPDATE: A 138-year-old New York Manufacturer Gets Another Life in Fulton
E.J. Willis Co. was founded in New York City in 1888 and for generations it has made ship’s bells and other equipment for the U.S. Navy and American shipbuilders. This summer, the new owner moved the company’s equipment to Fulton By Stefan Yablonski E. J. Willis Co. cast brass ship’s bells — handcrafted in the United States since 1888. Ship bells, “built to last a lifetime at sea,” are now manufactured in Fulton. E.J. Willis Co. has moved its operation and manufacturing business to Fulton. They are currently operating out of N.E.T & Die. The company is now under the ownership of Jonathan Hyatt. He recently acquired the company after seeing a for sale note on Craigslist. [caption id=attachment_11110 align=alignright width=400] Entrepreneur Jonathan Hyatt is the new owner of E.J. Willis Co. He bought the business this summer after finding a listing on Craigslist by chance.[/caption] “I had been looking for something to do. I had been 20 years in corporate America and I was just tired of building someone else’s empire, you know what I mean? I was in consulting, pretty much a jack of all trades. I wanted to do something that I could call my own,” he explained. “I’d been on this path of trying to find a business to buy for about a year. One night I am on Craigslist about 11:30 in mid-April searching for something completely unrelated. At the bottom of Craigslist was a ‘things you might be interested in from outside of your area.’ There was an ad that said 138-year-old bell manufacturing company for sale. So, I clicked; why not, right? I wasn’t looking to buy a manufacturing company, but I went down the rabbit hole, absolutely fell in love with the history and ended up buying it.” He read the ad and responded. “I called and I am talking to the owner of the business for about two hours. We ended with, let’s have another chat and then come on out here and have a look. I figured, well I might wind up getting kidnapped and getting murdered or there is a real business here. But I gotta see it through,” he quipped. “And sure enough, there is a big machine shop operation there. The gentleman who owned it was retiring and in the corner of this shop is a little room where they make bells and they have been doing this ever since the company had started.” That’s the one constant thing that has survived the changes of the business. [caption id=attachment_11061 align=alignright width=300] Sales 1929 general catalog published by E. J. Willis Co, listing all the merchandise it sold. It’s like the Sears Roebuck and Co. catalog for marine parts.[/caption] “I drove home and told my wife, ‘This is what I am doing for the rest of whatever we are calling this — mid-life crisis.’ And she said, ‘absolutely you got to do it.’ I took out a loan and off we go.” He put in an offer on the business and they closed on July 1. He didn’t disclose what he paid for the company. “In terms of price, the seller and I have agreed to keep those terms private.” “I am finding that I am a business owner, an archeologist, opening files and cabinets that haven’t been opened in 100 years. It’s just amazing, just cool things that I am finding,” he said. “I want to build the business back. I want to be able to sell the bells to outsiders. I think they are beautiful. “It’s really a wild story about a company that started in lower Manhattan, exploded in the automotive space, sold parts to the Wright Brothers, moved into the aeronautical world and then landed in marine. The cool thing, I have been digging around and the gentleman who owned the company prior to me was not a digital guy. There is nothing out there. “Now I am sitting here with all the art from like the 1930s, the E.J. Willis boat catalog it’s like 250 pages of things this company used to make. It’s like the Sears-Roebuck and Co. catalog for marine parts. We are modernizing, we are staying true to the heritage of the business. It’s exciting to be the next steward of the whole business.” Initially he thought he’d move everything from the company’s plant in Middleville, Herkimer County, to Boston, out of convenience. “Then I thought let’s keep the foundry where it is. Let’s not move anything right away,” he said. “I want to get a good sense of what we’ve got, what works and what doesn’t. “I went to the foundry and met with the people there, lovely people, and said here is my position — I am buying a company where everyone is retiring. There is machining and polishing to be done, who would you work with around here? Without hesitation they said, ‘you need to go to NET Tool & Die and talk to Michelle [Shatrau]. She is a third-generation machinist and she runs the company now.’” So, he drove to Fulton. “I knocked on the door, they let me in. And she said, ‘how’d you get in here?’” he said with a laugh. “We became fast friends. I told her what I am doing. It must have struck a nerve. She has a very entrepreneurial background. I must have said something right because she came out and she said, ‘I’d love to help you. Why don’t we move the equipment that you have into my large building and I will give you a space to work at and use my team?’” [caption id=attachment_11058 align=alignleft width=300] Bell in progress awaiting assembly[/caption] It’s a great relationship so far. “We are bringing the business into the modern world. It’s been a lot of stuff all at once. But it has been very exciting,” he said. “We moved in a month ago [in July]. We closed on the business July 1. We moved a couple weeks later. We had all our equipment set up, electrical being run, everything. [caption id=attachment_11059 align=alignright width=300] Bell attached to a lathe going through the machining process[/caption] “We’re working with NET Tool & Die to rebuild production and preserve manufacturing processes that, in some cases, existed mostly in the heads and hands of the people who had been doing them for decades. We’re currently working on several 200-pound ship’s bells and bringing an old two-way manual bilge pump back into production.” He said he will be working with NET employees for the time being, adding, “I’d love to get to a point where I have so much growth that I need to hire people.” No one wakes up and says, ‘I am buying a bell today,’ Hyatt admitted. [caption id=attachment_11060 align=alignleft width=225] Bell after receiving a custom etching toward the bell mouth[/caption] “Everyone does wake up and has things that deserve acknowledgment and remembering — a promotion, a marriage, the birth of a child,” he said. “These are the things I feel like if there was something that could capture a particular moment in time and will literally outlast the person that bought it, a bell is that. We can engrave a bell if you get married or the birth of a child. We can put anything on a bell. “I have orders, yes. I am working on several orders right now. We have a little bit of busyness. But there are still some things to work out. I want to make things consistently and continue to move forward.”
BUSINESS UPDATE: Port Perseveres Despite Tariffs’ Negative Impact
‘We are hanging tough ... in an environment that is incredibly difficult to do business in right now,” the port’s director says By Stefan Yablonski Tariffs imposed by the Trump administration have hurt the Port of Oswego by slashing Canadian aluminum cargo volumes and reducing revenue. “We’re doing good. We are hanging tough. It is a tough time for our line of business in general, you know with these tariffs and the amount of Canadian aluminum that we see through our docks,” said the new executive director, Tom Drumm. “Compared to 2025, we are doing exceedingly well in traffic coming in; not necessarily the volumes we were seeing, but yeah we are hanging tough in an environment that is incredibly difficult to do business in right now.” “I don’t know where people get these numbers to be honest. We have never publicly stated how much our revenue is down or up or left to right. We don’t have a strong sense of those revenue numbers until the shipping season really closes up. We won’t have an accurate picture of the revenue standpoint until after the shipping season, typically in late November,” he added. “What I can tell you is several of our Canadian vessels that carry the aluminum cells — the volume of aluminum on those vessels we have seen decreasing. That is attributed to a few factors. One is where Novelis is in in their restart process. Novelis is rocking and rolling right now. They are starting to pull a lot of aluminum from the port of Oswego, the aluminum that they roll down into coils. “Another factor plainly is the tariffs. Canadian aluminum is tariffed at 50%. So, on those vessels we are seeing lower numbers than we would like. We’d like to see vessels carrying roughly 10,000 metric tons of aluminum. Over the course of this year, we have seen more in the range of 4,000 to 6,000. “Every piece of that aluminum that we receive here by vessel at the port is from Canada and is subsequently hit with the 50% tariff. It directly affects us because we’ve received less volume than we would traditionally see pre-tariff times.” When the port receives less aluminum from those vessels it means less hours for the ILA (International Longshoremen Association) as far as folks that work on the dock, he said. When cargo declines, it affects everyone, fewer hours for longshoremen, fewer loads for truck drivers, fewer rail shipments and less business for local suppliers. “Outside of the aluminum that comes in by vessel, the port topped out at having roughly 4,600 aluminum ingots stored on site at the port. That project had never been done before. The port of Oswego had never had that many of those size ingots in our yard,” he said. “It has been a busy summer for the ILA. Would we like to see more work for them? Sure. They are working all those barges when they come in, but as opposed to working 15 hours they might be working seven or eight hours. It hasn’t been a distinct decline in ILA hours. There has been plenty of work to keep our guys busy throughout the summer.” More salt “We just brought salt back to the port in several, several years. Around Harborfest time at one point we had a salt barge here with about 24,000 metric tons of rock salt and we had an aluminum barge here the same week. We had close to 40 men working,” he said. “Yeah, the other products definitely keep us busy. The salt project was a massive project, one that we are proud of. I’ve got 24,000 metric tons of salt on site that has to go somewhere — that’s going to be another project.” It is important for the port to continue to look at different products, different commodities to try to diversify some of its revenue, he said, adding, “We have done a pretty good job of that in my first five months here … particularly with the rock salt we have on site right now. It is important to continue to try to stand out and work through some projects outside our usual business. I enjoy it. It is a challenge every single day we put our head down and we try our best.”
Are Bank Lobbies Still Relevant?
Local banking leaders say technology is changing the way customers use their banks — and their lobbies By Deborah Jeanne Post [caption id=attachment_11109 align=alignright width=300] Steve Gorczynski is M&T Bank Central New York regional president.[/caption] When was the last time you entered the lobby of your bank? If it’s been a while, you’re part of a trend of eschewing the lobby in favor of ATMs, drive-thrus, online banking and remote deposit. A 2025 study performed by the American Bankers Association revealed that only 9% of consumers use bank branches as their preferred way to do banking and 76% prefer mobile banking. The trend away from the lobby reflects consumer behavior in other areas of doing business, including online shopping instead of perusing the mall, ordering fast food at a kiosk, not at the counter and selecting curbside pick-up rather than walking into the restaurant. Consumers want convenience and going in the lobby adds another layer to the task. It also places consumers face to face with one or more representatives of the business, something less favorable to people feeling burned out from interpersonal interactions. Nixing or at least minimizing the size of the lobby isn’t necessarily negative for banks. Fewer people passing through their doors reduces overhead for building maintenance, staffing and furnishing. Greater reliance on virtual banking can mean closing brick and mortar locations and hiring fewer staffers to cover roles like teller and lending officer. “Our focus is on meeting customers where they are and giving them flexibility in how they bank,” said Steve Gorczynski, M&T Bank Central New York regional president. “While many everyday transactions can be supported digitally and through ATMs, branches remain important for more complex financial needs, offering face-to-face guidance and a more personal banking experience.” Talking with a commercial lender or working on a home mortgage are two examples where meeting face-to-face is more desirable for many people. They can receive immediate feedback to questions and can possibly reach their goals more quickly. But there’s little need to have a large seating area, long counters and numerous tellers for routine banking that’s quicker to handle virtually. Online banking can also help people on the go more readily complete banking tasks such as depositing checks, transferring funds among accounts and checking balances. [caption id=attachment_11135 align=alignright width=300] Tina M. Stephens is the vice president branch administration for Fulton Savings Bank.[/caption] “The traditional bank lobby is certainly being evaluated by most institutions today, as the typical large, open and cavernous spaces do not necessarily meet the needs of today’s customers,” said Tina M. Stephens, vice president branch administration for Fulton Savings Bank. “Traditional lobbies often bisect traditional teller stations and customer service areas, which adds confusion, especially for the demographic who routinely use online banking and only access the lobby for customer service needs.” Despite the rollback in physical locations across the industry, Fulton Savings Bank began modernizing its six branch offices in Oswego and Onondaga counties about three years ago and have finished four offices so far in Baldwinsville, Fulton, Constantia, and Phoenix. “We made the decision to build a new branch across the street from our current office in Brewerton which will be completed by the end of 2026, and we will begin the retrofit of our Central Square office in early 2027,” Stephens said. “Our efforts specifically address where we think customers will be in the next three to five years and have greater flexibility to make changes out into the future.” The bank may be onto something, as numerous reports state that screen-weary Gen Z young adults crave more in-person interactions than virtual ones. If the pendulum continues to swing in that direction, it’s hard to see all physical bank areas disappear, even if they change somewhat. Fulton Savings Bank has also consolidated its teller and customer service representative areas to larger “universal banker” areas, where the bank representative can address all customer retail needs. A one-stop-shop experience appeals to busy banking customers who want to perform a few different banking tasks in one visit. Stephens also said that Fulton Savings Bank made additional technology and security enhancements and created flex spaces to accommodate bank meetings throughout the two-county branch footprint. At Solvay Bank, Elizabeth Lavier, vice president marketing and communications manager, lauded digital and online services as convenient and flexible for managing finances; however, “technology is not meant to replace what matters most: the relationships behind every account that have always been at the heart of community banking,” she said. “Even in today’s digital-first world, people of all ages still value the opportunity to sit down with a trusted banker for personalized guidance. We understand that some of life’s biggest moments call for more than a screen.” Lavier views digital banking as another way for the organization to serve customers rather than a replacement for branches, tellers and lenders, which tend to serve customers better for transactions like buying a first car, purchasing a home, saving for a child’s education, or planning for retirement. “Those conversations, built on understanding, experience and personal guidance, are what community banking is all about,” Lavier said. “At the end of the day, banking is about more than transactions. It’s about helping our customers achieve their goals and being there for them every step of the way. By combining the convenience of digital banking with the care, commitment, and personal service of a local community bank, Solvay Bank offers customers the best of both worlds.” Are Paper Checks Destined to Disappear? With the ubiquity of debit cards, online payments, virtual checks and peer-to-peer payment platforms like Venmo, Zelle and PayPal, will paper checks become passe? “In my view, paper checks are unlikely to disappear in the near future,” said Tina M. Stephens, vice president branch administration for Fulton Savings Bank. “They continue to serve a practical purpose by providing a clear paper trail and tangible proof of payment.” According to the American Banker, a leading trade publication that covers the banking and financial industry, in 2024, checks accounted for 65% of all payment fraud losses. Paper checks should be phased out, according to the publication. “The phrase, ‘The check’s in the mail’ probably sounds strange to younger people because the era of paper checks is rapidly drawing to a close. Put bluntly, checks are an expensive, insecure legacy that is a drag on the U.S. economy. Rather than wait for them to vanish slowly, the pragmatic choice is to strategically accelerate the transition to paperless payments.”
Is there anything like October for sports in LA?
Brown Soul Brewing Co. prepares for an extra busy and fun-filled run in October
Apple Home Collection launches with LG and Schneider cameras, thermostats, and sensors
None of them need a separate app or account. Apple had a busy day today. The company introduced its HomeView smart display, the next-generation Apple TV...
NKY Health Department reports a busy third quarter — with programs to keep our region healthy
It was a busy summer for the Northern Kentucky Health Department, which strives to keep our region healthy in every way. Food health inspections, wellness kiosks. school inspections…
World Mental Health Day: 4 Mental Health Tips For Busy Workdays
This World Mental Health Day, discover four practical ways to improve your mental health at work, manage daily stress and make wellbeing a priority.
From family practice to business leadership: Dr. Michael App continues his journey at Davenport
Michael App, M.D., is a lifelong resident of Grand Rapids and a busy man. He runs his own private medical practice, leads the largest network of independent physicians in West Michigan, serves as medical director for Interim Hospice and Home Health Care of West Michigan, and is a student at Davenport University.
Mercy Health reminds public to prioritize health during busy fall and winter months
The fall and winter months get busy quickly with holidays, school activities and year end obligations. Mercy Health encourages the public to prioritize health with routine checkups and preventive care.
Interest in emergency medicine was waning after COVID. Will ‘The Pitt’ be a shot in the arm?
It was about 2 a.m. on a busy shift at Allegheny General Hospital, and emergency room physician Chris Morris felt terrible that his patient had been waiting...
Public health report: September inspection season turns up minor violations at 20% of businesses
The Waltham Health Department had a busy September, inspecting 90 business establishments between Sept. 1 and Oct. 2. It found minor health violations at
Public health report: September inspection season turns up minor violations at 20% of businesses
The Waltham Health Department had a busy September, inspecting 90 business establishments between Sept. 1 and Oct. 2. It found minor health violations at
Your Business Should Make You Wealthy, Not Just Keep You Busy
Build a business that creates wealth, not just work. Learn how to turn profits, cash flow and business value into long-term personal wealth.
ICE agents chase immigrants in front of Metairie business
ICE New Orleans say agents arrested three immigrants at a busy intersection in Metairie Tuesday morning and chased one of them on foot across Airline Drive.
“The Designs Are Way Cuter”: The Big Business of Bootleg Merch
It’s been a busy season for bootleggers in New York, with the Knicks’s championship and the World Cup leading right into Harry Styles’s MSG residency. How did this gray market get so big?
Tributes to Justice Melissa Hart
It was an extremely busy few weeks in court-related news, but the biggest and most unexpected development was the death of former state Supreme Court Justice Melissa Hart.
The UNC Sports Week Ahead: October 5th-11th
It’s a quiet week for UNC sports… Until it isn’t. Following a busy weekend, most of the UNC sports in action take a break until the weekend. Then during the weekend, you’ll have a lot of options for watching the Tar Heels play. This also includes a pretty big debut. UNC Basketball Yes, the regular […]
ACSH in the Media: Yahoo News, RealClear, Science & Culture, and More
From cancer and cannabis to perverse research incentives, we’ve been busy confronting nonsense. Here’s a roundup of recent media appearances and pickups featuring ACSH experts across the web, including coverage in Yahoo News, RealClearHealth, RealClearScience, and Science and Culture.
Ace Combat 8 is far and away the series' biggest launch on Steam
Despite releasing in a busy period, Ace Combat 8: Wings of Theve has already set new records for the flight action series.
Ashton Jeanty tallies 126 total yards
Las Vegas Raiders RB Ashton Jeanty busy against Kansas City
Booked, busy and really pregnant: 'Verity' star Anne Hathaway's nonstop year of blockbusters
Hathaway's Instagram bio — a casual list of the five films she's starred in this year — is further proof of how busy she's been.
Grading the Grizzlies' Busy Offseason Before the 2026-27 Season
Memphis reshaped its roster around Cameron Boozer, Zach Edey and Cedric Coward while moving on from Ja Morant. The Grizzlies' offseason deserves high marks.
GTA 6 Had A Really Busy Week
We are less than 50 days away from the release of Grand Theft Auto 6 and marketing is kicking into high gear
Carbondale business community preps for busy month
CARBONDALE — With SIU students in town, alumni coming to visit and the fall atmosphere finally rolling in, October is a big month for business in Carbondale.
Mondavi sets trio of shows in early October
The Mondavi Center will be busy during the coming week, hosting three performances in Jackson Hall.
Show-Me-State Politics: SNAP changes impacting Missouri; November’s busy ballot
KY3’s Tyler Wayne and KY3 Missouri Capitol Bureau Chief Hannah Falcon look at this week in Missouri politics.
San Jose Sharks season preview, lineup and prediction
The San Jose Sharks enter the 2026-27 season with playoff expectations following a busy offseason.
90 Ideas in 90 Minutes: Angie Currie
Schedule boredom We live in a culture that glorifies “busy.” Back-to-back meetings, full inboxes and packed calendars are like a badge of honor. But your best ideas will never come from a calendar that has no margin. Block 1 hour of unstructured, screen-free time into your week. No agenda. No tasks. No phone. It sounds counterproductive,…
Dodgers notes: Offense, Freddie Freeman, Miguel Rojas
As the Los Angeles Dodgers await the outcome of the final game between the Philadelphia Philles and Atlanta Braves to see who they will face in the NLDS, the team is busy working on keeping their bats and arms fresh and ready for the road to a three-peat that lies ahead. As Bill Plunkett of […]
October sports watch guide: World Series, WNBA Finals, NBA and ‘A Bears Love Story’
Here's what to watch across a glorious and busy month, which includes the Oct. 26 sports equinox.
How will the Rojiblanca academy fare this weekend?
Another busy day on the Cantera Rojiblanca circuits is just around the corner, Chivahermanos! The U-21 and Men’s U-19 teams will play their pending Matchday 2 fixture when they host Juárez at the V...
North Carolina Man Caught On Camera Vandalizing Political Signs
Damaging political campaign signs at a busy North Carolina intersection might have seemed like something nobody would notice. Fayetteville Police say 35-year-old Jeffrey Allen Ivey had an audience he ...
Game Preview: Pittsburgh Penguins @ Philadelphia Flyers 9/30/2026
Who: Pittsburgh Penguins (0-0-0) @ Philadelphia Flyers (0-0-0) When: 7:30 p.m. eastern How to Watch: Nationally televised game on TNT and TruTV, streaming on HBO Max Pens’ Path Ahead: The Penguins have a few days off to prepare for their home opener on Saturday night against Montreal. Next week will be a busy one with games […]
Openings, closings and coming soon: 8 Centre County business updates
Wawa, Climb Nittany and new shops were all part of a busy month of business news in Centre County.
Incredible news, wonderkid likely to make Liverpool debut
One of Liverpool's best wonderkids - arguably their outright best - is expected to make his his debut this season. We cannot wait.Liverpool are busy snapping up some of the biggest young talents aroun...
Science begins for Smile
On 23 September, the European-Chinese Smile mission was declared ready to start revealing how Earth responds to the wind of charged particles from the Sun. This follows a busy in-space commissioning period since the spacecraft launched on 19 May and reached its target orbit for science operations on 20 June.
AI, outrage, walls and killing — a busy week
Like most older folks, I’m a tad nervous about the whole artificial intelligence trend. But don’t worry, everything will be OK because our current president, obsessed with gold-trimmed minutiae, gave a speech at the United Nations, of all places, to announce we should now stop using the term “AI” and start using “SI” for “super […]
Philly fans anxious, excited during busy sports stretch
It's a busy time for Philadelphia sports fans.
12 New Things to Expect From Apple This October
October will be an especially busy month for Apple this year, with the company set to release the iPhone Duo, both iOS 27.1 and iOS 27.2, and a new Mac Studio configuration with 512GB of RAM. In addition, up to six more Apple products may be unveiled next month, such as new iPad mini, HomePod mini, and Apple TV 4K models. Below, we have outlined 12 new things to expect from Apple this October. Confirmed iPhone Duo: The foldable iPhone Duo launches on Friday, October 23.
Navigating the American Dream: How Integrated Financial Tools, Credit and Rewards Can Help Small Businesses Succeed
(Feature Impact) Owning a small business has been a cornerstone of the “American Dream” for generations. It represents the chance to transform a passion into a livelihood and legacy. However, turning dreams into reality is rarely a smooth or easy process and requires more than ambition alone. Today’s business owners need support and access to tools that enable them to overcome challenges and keep growing.#placement_678081_0_i{width:100%;margin:0 auto;}var rnd = window.rnd || Math.floor(Math.random()*10e6);var pid678081 = window.pid678081 || rnd;var plc678081 = window.plc678081 || 0;var abkw = window.abkw || '';var absrc = 'https://ads.empowerlocal.co/adserve/;ID=181918;size=0x0;setID=678081;type=js;sw='+screen.width+';sh='+screen.height+';spr='+window.devicePixelRatio+';kw='+abkw+';pid='+pid678081+';place='+(plc678081++)+';rnd='+rnd+';click=CLICK_MACRO_PLACEHOLDER';var _absrc = absrc.split("type=js"); absrc = _absrc[0] + 'type=js;referrer=' + encodeURIComponent(document.location.href) + _absrc[1];document.write('');Recent research conducted by the Capital One Insights Center shows 75% of more than 1,000 surveyed small business owners with more than one employee and annual revenues of up to $20 million are confident about the future, and 69% believe their business is actively primed for growth.While this optimism is promising, 47% of business owners still said their operations either stayed the same or became less efficient over the past year, citing issues like back-office friction and fragmented financial systems that make it difficult to get a clear picture of the health of their businesses.If you’re a small business owner eager to grow but not sure how to get there, start with this advice from real small business owners and experts at Capital One.Identify Sources of FrictionBefore you can pour effort into growth, you must understand what barriers are holding you back. Take time to look under the hood of your business to identify where time and energy is being lost.For example, you may be among the 78% of small business owners who feel stressed and uncertain about expense management – think hours spent hunting for receipts, manually entering numbers into software and reconciling accounts. Operational challenges aren’t just a hassle; they also pull attention away from important priorities like serving your customers and planning for growth. “We were focused on making as many candles as possible, especially during the busy season,” said Katie Roering, co-owner of Fontana Candle Co. “A lot of the back-office tasks like procurement, raw material purchasing, forecasting – all the really important things – were done at 3 a.m., 8 p.m. or on Saturday and Sunday, and there really just was not enough time in the day to get everything done that we needed to. We just knew as we continued to grow, we needed to streamline our processes, build out our team and keep moving forward.”Use Integrated Tools to Manage FinancesInstead of balancing 10 different tracking and analysis tools, you can turn to one-stop solutions to improve efficiency. Time gets lost when you’re forced to manually gather and interpret relevant data before you’re able to act. You need a platform that handles the busywork for you.Integrated, or “all-in-one,” financial tools – like accounting and bookkeeping platforms with automation capabilities or business credit cards featuring built-in analytical tools – allow you to easily stay on top of cash flow and day-to-day operations. For small businesses where every hour and dollar makes a difference, consolidating and automating systems can have an immediate impact. In fact, 51% of survey respondents said integrated tools have already fueled their growth.Leverage Credit Access and Rewards WiselyGrowth requires capital, so access to credit is a game-changer for many business owners, with 77% describing it as a key factor in achieving business resilience. Having funds accessible when you need them makes your business more capable of weathering storms such as equipment failures and seasonal slowdowns. It also puts the power in your hands to act when an exciting opportunity presents itself, like an inventory flash sale or the chance to advertise in a new market.Access to credit comes with another advantage: rewards. By using credit cards for your daily business expenses, you can earn cash back, points or travel rewards. Whether you redeem these to cover everyday expenses, book business trips or reinvest in the business, they can act as a bonus source of income. Learn to maximize rewards like the 84% of small business cardholders surveyed so you aren’t leaving money on the table.To learn more about how small business owners can identify obstacles, employ integrated financial tools and use credit as a tool for growth, read the full report at capitalone.com/about/insights-center.Photos courtesy of Shutterstock
Derrick Henry has busy Week 3
Baltimore Ravens RB Derrick Henry adds to touchdown total in Week 3 win
Ashton Jeanty busy in Week 3
Las Vegas Raiders RB Ashton Jeanty gained 93 total yards against the Saints
See the brilliance: Dunn artist creates and sells glass artwork that shines brightly
Cindy Akers-Gilford creates stained glass, fused glass, mosaics, handmade glass jewelry, pendants, suncatchers and other original glass artwork in her studio in Dunn, N.C. Photos provided by Cimply Broken.Self-made Artist and Founder of Cimply Broken, Cindy Akers-Gilford is helping people “see the brilliance” in all things with her glass artwork. Akers-Gilford started her business right after she retired from 20+ years as a civilian contractor at Fort Bragg. The official opening date for Cimply Broken was Nov. 8, 2021.“It’s been quite the adventure ever since. Not only did I have to learn how to manage a small business, but I’ve never taken a class in stained glass or anything I currently do,” shared Akers-Gilford. Her work includes stained glass, fused glass, mosaics, handmade glass jewelry, pendants, suncatchers and other original glass artwork.“I chose glass art just by happenstance. I saw a video on YouTube with a gentleman using plates and resin to make beautiful windows. I used that idea and created a simple picture frame-sized piece for myself. It was beautiful. I put it up in my window and pretty much forgot about it for a few days. Well, one beautiful sunny morning I went up to my studio, and the sun was rising and the light was shining beautifully through that piece. It was absolutely stunning. I thought that it was the perfect reflection of how God’s light shines through each of us. It was broken glass, so it changed ever so slightly as the sun continued to rise in the sky. I thought it poignant – like each of us – we all shine bright and differently in God’s glorious light, and we are all simply broken as well. We are all made beautiful in his light,” explained Akers-Gilford.The name of the business was inspired by the artist’s name and her faith-driven mission. “Simply became ‘Cimply’ as a play on my name and ‘simply’… and ‘Broken’ because we are all Cimply Broken – but each of us is beautiful,” added Akers-Gilford.Akers-Gilford sells her glass art at the Dunn Farmers Market when the weather is bearable, but mostly from her website at www.cimplybroken.com. “I enjoy getting lost in the creative process. I work out of my home, and I often compare my studio to Walmart returns after Christmas time. It’s hectic, busy and there are always at least 10 things being created simultaneously- it is fun!” shared Akers-Gilford. Her goal for the business is to continue to watch customers as they spot a piece of work from a distance and walk up to it in awe. “That is my biggest joy! I don’t speak to them until they speak – that is their moment to ‘See The Brilliance,’ which is my moniker,” shared Akers-Gilford. She also shared she would love to someday become part of an artist collective in Dunn.
Intel Panther Lake Teardown, 18A, BSPD, GAAFET, SemiAnalysis STEEL
Panther Lake debuts the first commercial implementation of backside power delivery (BSPDN), introduces Intel’s first iteration of gate-all-around (GAA) transistors, and showcases their advanced packaging capabilities with its Foveros-S assembly. With Panther Lake, Intel’s manufacturing arc has shifted from nebulous roadmaps to shipped silicon, a significant milestone on their long road back to competitive semiconductor manufacturing. To evaluate the extent of Intel’s comeback, we tore down Panther Lake. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Our teardown traces 18A from its four-sheet RibbonFETs (Intel’s marketing name for GAAFETs) and gate stacks through contacts, frontside and backside wiring, and the bonded carrier. We explain how these material and integration choices improve gate control and reduce resistance, while adding capacitance, thermal resistance, and process complexity. Our measurements put Panther Lake’s 18A compute logic and TSMC N3E GPU logic at similar logic density. However, 18A does not lead TSMC N3P, N2 or Samsung SF2 in peak density. Panther Lake’s CPU cores are incremental updates, and the high-end GPU still uses TSMC N3E. Panther Lake assembles one compute tile, one GPU tile, and one I/O tile atop a passive base tile using Intel’s Foveros-S advanced packaging. Both compute tile variants use Intel 18A. The Xe3 GPU options are a 4-core GT1 tile on Intel 3 and a larger 12-core GT2 tile on TSMC N3E. Both I/O tile variants use TSMC N6. [1], [2] Our analysis centers on the PTL-U compute tile, both the 4-core and 12-core GPU tiles, as well as the 12-lane I/O tile. In conventional chips, power and signal are routed through the same frontside metal stack towards the device frontend. Power rails consume scarce routing resources near the transistors, while tall via stacks carry VDD and VSS from the coarse upper wires to local rails. Backside power delivery (BSPD) moves the main power network behind the transistor layer, to the backside, separating it from frontside signal routing. We covered BSPD and its impacts in 2024. [3], [4], [5] Intel’s BSPD implementation, branded as “PowerVia”, routes power through dedicated backside metals to nano-TSVs, which connect those rails to local source/drain (S/D) contacts. Implementing that separation requires Intel to build the interconnect stacks from both sides of the wafer. The frontside comprises the M0-M14 signal stack, while the backside comprises the BM0-BM5 power stack. M0 and BM0 are closest to the transistors. The nano-TSVs connect the two sides, but Intel patterns and etches each via from the front after forming the contacts. A narrow via runs from the side of the contact deep into the silicon substrate. Intel then completes the frontside signal metal stack, bonds the wafer to a carrier, flips it and removes the original substrate until the buried via tips are exposed. The backside metal stack is then deposited directly on the revealed vias. The nano-TSV and backside-via profiles taper in opposite directions because Intel forms them from opposite sides of the wafer. The transistor structures form the FEOL. Local contacts and nano-TSVs connect them to the wiring. M0 begins the frontside interconnect stack. The silicon carrier remains attached above the frontside interconnects. It supports the device wafer during substrate removal and backside processing and remains part of the finished chip’s thermal path. PowerVia removes the main power distribution from the congested frontside metals, routing supply through shorter and wider backside wires. Its lateral landing still occupies area in the standard cell, so it recovers less cell area than a direct backside contact. [3] Nano-TSVs beside the logic devices carry VDD or VSS from the backside power network, while signal connections continue upward through the frontside metals. Backside Interconnects Samsung SF2 data is included for comparison to Panther Lake’s within this article. SF2 is the incumbent GAA foundry node but lacks BSPD, serving as a useful reference to evaluate 18A. A full teardown of Samsung’s S26 products, processed on SF2, will be shared soon.Nanosheet-cut EDS comparison. The PowerVia supply path runs from the backside Cu rails through Mo-lined W nano-TSVs to the local transistor contacts. In this cross section, the tapered connection spans roughly 150 nm from the contact level to BM0. The Ta liner confines Cu and promotes adhesion to the surrounding stack; the AlOₓ etch stop controls the next dielectric etch above the rail. Dielectric beneath the ribbons electrically separates the devices from the backside wiring and removes the conducting silicon body below the channel. [6] AlOₓ serves as an etchstop (ES), enabling endpointing and protecting the underlying layers. Low-volatility aluminum fluoride reaction products resist the fluorinated plasma, allowing a thin AlOₓ film to protect the metal while the surrounding low-k dielectric is removed. [6], [7]. While the BM0 and layers above the M1 lines show double AlOx layers, Our SMIC N+3 teardown showed single AlOₓ layers. SMIC uses a simpler local AlOₓ substack, while the remaining cap and etch sequence provide the required landing protection. So why double layers? The closely spaced AlOₓ doublets provide two protected endpoints in the etch sequence. Intel documents an AlOₓ/SiN/AlOₓ stack that explains the benefit. The main dielectric plasma etch stops on the first AlOₓ film; a selective wet clear opens that film; a second plasma etch removes the intermediate SiN and stops on the second AlOₓ film. The final wet clear exposes the metal landing surface. SiN is the intermediate dielectric in Intel’s published example. [8] The second stop protects the metal through a cap breakthrough. Wide openings can etch faster than narrow ones, and etch depth varies across the wafer. Metal under an early-clearing opening would otherwise be exposed while other openings still need more etching. Staged protection widens the process window and reduces metal erosion, corrosion and void formation. [8] TSMC documents AlN/AlOₓ/SiOC/AlOₓ above Cu, with AlN blocking Cu diffusion, and a simpler AlN/SiOC/AlOₓ variant that omits one AlOx film. [9] Levels with different opening sizes, aspect ratios, pattern densities and cap materials need different etch margins. A double AlOx stop is useful where another protected endpoint justifies the added processing. The extra film adds formation, selective opening and cleaning steps, plus another set of interfaces to control adhesion, moisture, and stress. These blanket films are opened through the existing via pattern, so each film does not require another lithography mask. AlOₓ adds parasitic capacitance when it replaces lower-k dielectric; two thin AlOₓ films can nevertheless contain less AlOₓ than one thick film. Total thickness, placement, and theintermediate dielectric determine the electrical cost. Deposition chemistry also changes AlOx permittivity and residual hydroxyl content, which can oxidize the underlying metal. [7], [8], [10], [11] The backside stack separates into relatively fine BM0-BM2 wiring near the devices and coarser BM3-BM5 power distribution. The largest pitch increase occurs between BM2 and BM3. BM0’s pitch closely matches the logic-row height, fitting local power delivery to the cell rows. Higher levels aggregate current through larger conductors: routing density becomes less important than low resistance and current capacity as the network approaches the package. This hierarchy provides wide power wiring for the power delivery network without consuming scarce frontside signal-routing resources. [3] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Frontside Interconnects Intel 18A combines Mo-lined W contacts and nano-TSVs with a separate backside Cu power network. Samsung SF2 keeps power on the frontside, using Ti-based contact interfaces and Ta-based barriers and Co liners around Cu wiring. In 18A standard-cell rows, backside power rails supply the devices through nano-TSVs within the cells, freeing frontside routing resources. Samsung’s M0 accommodates both power and signal connections. From the device toward M0, the connection runs through a Ti-based S/D interface, W contact fill, a Mo-lined W via, and the Cu M0 wire. Mo supplies a conductive nucleation and adhesion layer for W, replacing the resistive TiN liner used in conventional W integration. This increases the effective conduction volume within the feature while retaining W fill and its established polishing, cleaning and etching processes. Intel’s Mo/W patent describes this integration tradeoff. The nano-TSV uses the same Mo-lined W construction in the backside supply path. [12] The move from TiN to Mo is an incremental change. While a full Co or Mo fill can also reduce the volume lost to liners in very small features, it requires new integration schemes that increase complexity and risk. Cu remains attractive for wider wires due to its low resistance. As wires and vias shrink, the diffusion barrier consumes an increasing fraction of their cross-section. [12], [12], [14] Intel uses Co/Ru liners at M0-M1, Co at M2-M4, and Nb at M5-M9. The lower-level liners help Cu adhere and reduce void formation during trench fills. Applied Materials’ Endura has new thermal control that facilitate wetting process, so the thin film continuity is good enough that good capillary pressure will drive Cu atoms to the via bottom without voiding. Intel’s choice to use Nb is particularly interesting. Intel’s Nb patent describes a conductive diffusion barrier intended to reduce the barrier’s contribution to resistance relative to conventional Ta-based barriers, particularly at via bottoms where all current crosses the barrier. The patent pairs Nb in coarser levels with the option of lower-cost PVD processing. [15], [16] The upper metal layers support thicker barriers formed through physical vapor deposition (PVD) despite its worse coverage and uniformity. Meanwhile, the lower metal layers require thinner barriers deposited through conformal atomic layer deposition (ALD). Co/Ru adds another material interface and requires controlled deposition and Cu fill. Changing liners and barriers by metal layer allows Intel to optimize interconnect resistance, process complexity, and reliability. [15, 16] RibbonFET, Intel’s name for its gate-all-around FETs (GAAFETs), replaces the FinFET’s vertical fins with four stacked horizontal silicon nanosheets, allowing the gate to surround the channel on every side. The path to GAAFET begins with the planar transistor. A planar MOSFET places the gate above the channel between its source and drain. Pairing an NMOS with a PMOS transistor creates a CMOS inverter, in which the NMOS pulls the output low for a high input, and the PMOS pulls it high for a low input. The gate must retain electrostatic control of the channel to ensure clean switching. As gate lengths shrank, the drain began to compete with the gate for that control, increasing off-state leakage. Electrostatic control was restored through an architectural evolution that raised the channel into a vertical fin and wrapping the gate around three sides. Called “FinFET”, this new architecture packed more effective channel width into a smaller footprint. Further scaling made it harder to maintain both drive current and leakage within smaller cells, and reintroduced the same problems planar MOSFETs faced. Nanosheet GAAFETs close the fourth side by replacing the vertical fin with a stack of horizontal nanosheets, each surrounded by the gate. The tighter electrostatic control suppresses leakage at shorter gate lengths while stacking adds effective channel width within the cell footprint. In a FinFET process, channel width changes in discrete steps as designers must add or remove whole fins. Nanosheet width can instead be adjusted continuously within the process’s design rules. Wider sheets increase drive current, while narrower sheets reduce capacitance at the cost of drive current. Intel 18A uses stacks of four nanosheets each and varies their widths across logic and SRAM. At the process level, adding more sheets to each stack increases effective channel width and drive current, but complicates fabrication. RibbonFET vs MBCFET Samsung began GAAFET production in 2022 with SF3E, following with SF3 and now SF2. Its ‘MBCFET’ provides a useful structural comparison with Intel’s first RibbonFET implementation. [17] STEEL is digging deeper into SF2, used in the Exynos 2600, and TSMC’s GAAFET N2, used in Apple’s A20 Pro, in upcoming newsletter articles. We’re throwing some teasers on X. Let’s compare Samsung SF2’s MBCFET with Intel 18A’s RibbonFET. Subscribe Even to the untrained eye, Intel’s extra nanosheet is obvious. Intel stacks four ribbons to Samsung’s three. Samsung’s sheets are much wider in these fields, so both sheet count and width matter to the available channel perimeter. Sheet width also changes which silicon surfaces carry current. On conventional (001) silicon, wide nanosheets emphasize the broad top and bottom surfaces, favoring electron transport; the larger sidewall contribution in a narrow sheet favors hole transport. Thinner sheets improve gate control but increase confinement and scattering. This makes width and thickness part of the NMOS/PMOS balance, alongside strain and threshold voltage. [18], [19] GAAFET designs like 18A use different work-function-metal (WFM) stacks for NMOS and PMOS. Around each ribbon, a thin SiOx interfacial layer separates the silicon channel from the HfOx high-k dielectric, with La providing dipole tuning and the WFM wrapping the dielectric. NMOS uses a TiAl-based stack, while PMOS uses TiN WFM. W fills the remaining gate trench, providing a lower-resistivity path where the work-function layers are no longer needed. In this field, the PMOS stacks leave room for W between ribbons, while the NMOS stacks occupy more of those gaps. A silicon-based dielectric marks the P/N boundary, allowing the PMOS and NMOS gates, sharing the same gate trench, to be processed sequentially. Fast logic paths, retention circuits, and SRAM need a family of threshold options. Changing threshold without substantially changing device dimensions, capacitance or fabrication complexity is valuable. FinFET processes typically use different work-function-metal stacks. In a four-ribbon GAA stack, the narrow sheet-to-sheet gap limits how much WFM can fit around each channel. La in the gate dielectric creates interfacial dipoles at the SiOx/HfOx boundary, shifting effective work function and tuning threshold voltage. This gives Intel another control alongside its NMOS and PMOS WFM stacks. Low-threshold devices improve critical-path drive; higher thresholds reduce leakage elsewhere. Dipole tuning is especially useful in GAA because it changes threshold without consuming the narrow intersheet gap with thicker WFM. Precise control of La incorporation, diffusion and interface quality has long been a challenge, limiting viability in high volume production but is now seen from every leading-edge foundry. Intel’s patent describes depositing a dipole-forming oxide above HfOx and annealing it toward the interfacial oxide before completing the work-function and fill metals. This separates threshold tuning from the space available for metal. Newer research addresses the thermal cost: imec’s 2026 dipole-middle research inserts the shifter between two HfOx depositions, shortening the diffusion path while protecting SiOx during patterning. [20], [21]Matched-cut EDS, Intel 18A (left) vs. Samsung SF2 (right). Intel retains raised source/drain epi beneath its contacts, while Samsung recesses W deep into the epi to form a V-shaped Ti-lined interface. The deeper contact increases metal-to-semiconductor area and shortens the current path from the lower sheets, reducing contact and spreading resistance. It also removes epi volume and brings the contact etch closer to the channel ends. Retaining more epi preserves the material available for strain transfer, especially from SiGe into PMOS. These geometries balance contact access against stress engineering and etch margin. [22], [23] Samsung stacks three sheets to Intel’s four ribbons, and both processes use sheet width to tune drive strength. In our Samsung cross-sections, widths range roughly from 19 to 30 nm in the NPU rows and 37 to 50 nm in the CU cell. The Samsung nanosheets taper, with the widest sheet at the bottom and the narrowest at the top. Both processes use HfOx gate dielectric and Ti-based work-function stacks, with Al in the NMOS stack. In the Samsung devices shown here, the dielectric and WFM occupy the intersheet gaps, leaving W above the top sheet. Intel’s PMOS stack leaves more room between ribbons, and W fills those gaps while the thicker NMOS stack leaves W mainly in the upper trench. Gate-stack EDS maps. The W between Intel’s PMOS ribbons provides a conductive path close to the lower gates. Where WFM fills the entire gap, the gate still surrounds the channel, but voltage reaches it through the more resistive work-function films. Thinner WFM and dipole tuning preserve room for low-resistivity fill; Mo and Ru are alternative fill metals being developed for further scaling. [24] A masked, sequential WFM flow explains the different gate heights and inter-nanosheet fill. The proposed sequence below shows how separate NMOS and PMOS work-function steps produce that geometry. Enabled by the BSPDN process, Intel replaces the dense-logic silicon subfin with dielectric, removing the parasitic conduction path below the ribbons and reducing substrate-related capacitance. A retained silicon body as in classical, non-SOI, planar and FinFET designs needs junction and punchthrough-stop engineering to suppress leakage. Dielectric isolation makes that leakage less sensitive to the subfin doping profile but adds removal and fill steps. It also weakens the direct thermal path through silicon, making the contacts, metal stacks and package more important for heat extraction. [24], [26] Fluorine is concentrated around selected Intel device structures in the maps. WF6 is a standard precursor for W nucleation and fill, while barrier films protect adjacent dielectrics from fluorine attack. Low-fluorine W processes reduce the residual-F burden. Chloride-based precursors avoid introducing F during W deposition, but require control of chlorine attack, nucleation and fill quality. The integration target is a continuous, low-resistance W path with a thin protective liner and minimal chemical damage to the surrounding stack. [20], [27], [28] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. We measured cell height, gate pitch, metal geometry, and ribbon dimensions at the XTEM sites shown below. The tables group these dimensions by site and device polarity. Our “sheet cuts” cross the silicon channel and show the ribbons end-on. “gate cuts” run along the channel through successive gates. The 18A logic cell dimensions point to a five-track logic library while the N3E and Intel 3 cell dimensions evidence a seven-track logic library. The DDR-PHY uses wider M0 wires and much larger spacing than core logic. That trades routing density for lower wire resistance and weaker coupling between neighboring nets. The geometry suits the current delivery and coupling requirements of analog, clock, and I/O circuitry. PowerVia lets 18A combine a compact cell height with wider M0 geometry by moving the main power rails off the signal-routing tracks. That relaxes local wire scaling while preserving a small cell footprint. Cell height and gate pitch set the geometric density; pin access and routability determine how much of it a real block can use. [29] The biggest takeaway from our gate-pitch measurements is that Intel 18A compute logic and TSMC N3E GPU logic have similar density in the Bohr representative-cell model. The 18A example is 18.6% denser than the Intel 3 GPU example. Gate pitches are nearly identical across the three sites, so cell height drives most of the difference. The Bohr model combines a four-transistor NAND2 spanning three gate pitches and a 32-transistor scan flip-flop (SFF) spanning nineteen pitches, weighting their densities 60:40. The sensitivity column shows how independently changing cell height and gate pitch by ±1 nm changes the result. This compares representative cell geometries; whole-die density also depends on cell mix and placement. The 18A P-core gives M0 substantially more metal cross section than the N3E vector engine. Treating each profile as a trapezoid gives 2.63 times the area per line and 1.84 times the area after normalization by routing pitch. The larger section reduces the geometric contribution to line resistance and lowers current density for a given current. Taller and wider wires also add capacitance, so circuit delay depends on the balance of resistance and capacitance. The DDR-PHY has less metal area per routing width than the 18A core fields, while remaining above N3E. [30] Area = height × (top CD + bottom CD) / 2, including liners. Area/pitch normalizes by routing width. Taper is the symmetric sidewall angle from vertical, with the largest angle belonging to the DDR-PHY. Compute tile The measurements show how ribbon dimensions and gate-stack geometry vary across the compute tile and between NMOS and PMOS to balance channel drive, gate load and the space needed for the dielectric/WFM stack across logic, SRAM and the DDR-PHY. Width mainly changes available channel perimeter; thickness also changes electrostatic control and carrier confinement. Gate-stack thickness then determines the space left for low-resistivity fill P-core and LP E-core logic Both the P-core and LP E-core use multiple nanosheet widths. Widths are measured on high-magnification XTEMs while wider-field images demonstrate additional width choices within the LP E-core. Multiple widths are expected even within an LP E-core. Timing-critical paths, buffers and cells with different fanout need different drive strengths. The lower-magnification fields show this width diversity beyond the sites quantified in the table. L2 and L3 SRAM GAA gives SRAM designers another way to balance the pull-up (PU), pass-gate (PG), and pull-down (PD) transistors. FinFET bitcells set device strength through fin count while GAA adds nanosheet width as a sizing knob. In a 6T SRAM cell, a strong pull-down relative to the pass-gate limits read disturbance, while a strong pass-gate relative to the pull-up improves writability. During a write, the pass-gate and write driver pull the node storing “1” below the inverter trip point. During a read, the pull-down holds the node storing “0” low. Bias, threshold voltage, mismatch and assist circuitry set the remaining margin. FinFET high-current cells commonly use a PU:PG:PD fin-count pattern of 1:2:2, a device-sizing ratio rather than a current ratio. Ribbon width lets Intel balance SRAM strengths without adding whole fins. The L2 cell uses its narrowest ribbons for PU and widest for PD, improving writability and read stability respectively. Intel’s disclosed HCC operates without assist; its denser HDC uses negative-bitline write assist. Pulling the selected bitline briefly below ground increases pass-gate overdrive so it can overpower the pull-up at lower supply voltage. That buys density and low voltage writability at the cost of boosting circuitry, switching energy, and additional voltage stress that must be controlled. [31], [32] Four rectangular ribbons give the perimeter = 8 × (width + thickness), before corner rounding. PG/PU is 1.49 and PD/PG is 1.16. The L3 structures closely resemble L2 in layout and cell height. Fewer L3 nanosheet widths are tabulated because fewer high-magnification images were available. DDR PHY The DDR-PHY trades density for controlled analog behavior and reliable off-chip signaling. It contains drivers, receivers, delay circuits, and calibration logic that set drive strength, sampling time, and voltage margin. Repeated four-sheet devices with similar widths fit the use of regular transistor units for matching and programmable drive. Its wider local wiring provides room for current delivery and separation of sensitive signals, while consuming more area than a dense core-logic grid. The layout serves the memory channel’s electrical requirements as well as digital logic density. [33] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Intel 3 GPU devices Vector engine logic Intel 3’s XVE logic uses two-fin PMOS and NMOS devices with power rails in M0. Its cell height and M0 pitch give a seven-track geometry, two tracks more than the 18A logic. One-fin groups also appear among the two-fin devices. Intel 3 L2 SRAM The Intel 3 L2 SRAM uses the familiar HCC sizing pattern: one PU fin, two PG fins, and two PD fins. N3E GPU devices Vector engine logic The N3E XVE field contains repeated two-fin devices with seven-track cell geometry. N3E remains a FinFET process, giving Panther Lake a direct FinFET-to-RibbonFET comparison. N3E L2 SRAM The N3E L2 SRAM uses the same PU:PG:PD fin-count pattern of 1:2:2. Panther Lake-U follows Lunar Lake’s floorplan quite closely. Both pair 4 P-cores with 4 LP E-cores and NPU, media and display engines in similar locations. Lunar Lake also uses Xe2, the direct predecessor to Panther Lake’s Xe3 GPU. This makes Lunar Lake the most direct basis for our comparisons. Arrow Lake differs in core count and uses the older Xe-LPG GPU architecture, so we only use it where it offers a more direct component-level comparison. Compute tile Panther Lake compute-tile floorplans remain sparse even months after launch. Intel 18A’s backside metal and dielectric stack must be removed without damaging the underlying structures before a clean transistor-level floorplan can be imaged. Most published die shots hide or heavily process the background, but we are quite proud of the die shot we achieved and are excited to show the work we have done. We measured the areas of the key components on the compute tile and compared them with their Lunar Lake predecessors on TSMC N3B. These help us to capture changes in block area and compare the two chips across process nodes and designs. Our total tile areas exclude the scribe-line area. The compute-plus-GPU subtotal below uses the PTL-U compute tile and GT1 GPU; it excludes the I/O tile and passive base. Individual block areas use the boundaries marked on the floorplans The compute-plus-GPU row is recomputed from the displayed PTL-U and GT1 areas. Component rows use their stated per-region counts and are not an additive partition of the whole tile. The P-core area remains almost unchanged between Lunar Lake and Panther Lake, despite L2 capacity increasing from 2.5 MiB to 3 MiB. Arrow Lake uses the same Lion Cove core as Lunar Lake but also has a 3 MiB L2. Cougar Cove fits 20% more L2 into the same P-core area. The larger private cache keeps more of each core’s working set close to its execution units, reducing access to shared L3 and DRAM. Extra capacity adds storage leakage and lookup energy, so designers balance it against avoided lower-level accesses. The shared P-core L3 cache also shrank by 14.8%. [2] Cougar Cove combines a similar footprint with Intel’s reported power-efficiency improvements. RibbonFET’s tighter channel control reduces leakage, while PowerVia reduces supply droop and allows tighter voltage guardbands. [1] Darkmont’s four-core LP E-core cluster is 5.0% smaller than Skymont’s on Lunar Lake, with most of the reduction in its L2 regions. The 1 MiB region shrank by 8.4% and the 1.5 MiB region by 14.9%. The tag arrays also use one fewer visible row. Tags identify which memory addresses the data array holds, so rearranging them changes the cache’s layout and wiring without requiring less data capacity. [2] The LP E-cores share one L2. This pools capacity and avoids duplicating all the cache machinery, but the four cores contend for its banks and bandwidth. Their separate cluster also keeps light work away from the performance cluster and its L3, allowing that larger domain to sleep. [1], [2] Cache area includes more than the storage cells. Tags identify each line, decoders select rows, sense amplifiers read the small bitline signal, and wires connect to the banks. Splitting an array into smaller sections shortens wordlines and bitlines, improving access speed, but duplicates peripheral circuits. Panther Lake’s smaller cache regions therefore reflect the complete memory implementation, including how much of each region is devoted to storage. [34] Unlike Meteor Lake and Arrow Lake, Panther Lake has no separate SoC tile. The NPU, LP E-cores, memory controllers, PHYs, media and display engines now share the compute tile. This removes an active die and keeps CPU memory traffic on one die. The cost is moving PHY and I/O-related circuitry onto 18A: drivers, receivers and analog circuits must still meet external voltage, loading and signal-integrity requirements, so their area does not shrink like dense digital logic. [1], [2] The biggest shrink comes from the NPU, which occupies 36.9% less area. NPU 5 consolidates the same total INT8 MAC count into half as many neural compute engines. Each of the three NCEs has a larger MAC array to make the complete NCE envelope 22.6% larger than an NPU 4 engine. Consolidation also halves the number of scratchpads and SHAVE DSPs, from 12 to 6. The MAC array handles matrix multiplication and convolution, while SHAVE executes vector and custom operations that fit the array poorly. [1], [2], [35] The paired floorplans identify each NCE envelope and its scratchpad, MAC, and SHAVE regions. Each measured MAC polygon is counted once per NCE in the area accounting below. The scratchpads store weights, activations, and intermediate results near the MAC arrays, allowing repeated use without fetching them again from DRAM. Halving their number delivers the largest measured area saving but leaves less local storage for the same total MAC count. Layers that no longer fit locally require smaller working tiles or more transfers of intermediate data. The benefit depends on keeping the enlarged arrays busy while managing that tighter storage budget. [36] NPU 5 also adds native FP8. Using half the operand width of FP16 reduces storage and transfer demand, helping workloads fit the smaller local memory budget. Lower precision and format-dependent range make scaling and model validation part of deployment. Hardware activation functions further reduce work that would otherwise occupy the programmable DSPs. [1], [2] Microsoft requires an NPU to deliver at least 40 TOPS for Copilot+ PCs. Both Lunar Lake and Panther Lake meet this threshold, but Panther Lake uses significantly less silicon. GPU tiles Panther Lake is Intel’s first product with Xe3, its latest GPU architecture. It offers two different GPU tiles: a smaller GT1 tile with 4 Xe3 cores on Intel 3 and a larger GT2 tile with 12 Xe3 cores on TSMC N3E. Panther Lake allows us to compare the same GPU architecture across both Intel 3 and TSMC N3E. Wildcat Lake adds a third Xe3 implementation on Intel 18A. A future newsletter will detail Xe3 and its implementation differences across all three process nodes. GT2 scales Xe3 to a different physical layout, with render slices arranged vertically instead of GT1’s horizontal arrangement. Slice placement sets the distances to shared cache banks and the D2D interface. Those wires consume area and add delay, so scaling the number of Xe cores also requires a new balance of cache placement, routing and timing. [1] What’s immediately obvious is that the GT2 tile on TSMC N3E has much smaller Xe cores than GT1. These block areas include logic, caches, and routing. An Xe core on the GT1 tile is ~69% larger than one on Lunar Lake, and ~55% larger than one on GT2. Intel 3 therefore uses substantially more area per Xe core. The block-area gap exceeds the measured logic and SRAM density gaps, bringing routing, timing targets, cell mix, and floorplan allocation into the comparison. The measured vector/matrix engine region is almost unchanged between Lunar Lake and Panther Lake’s GT2 tile. Xe3 retains eight 512-bit vector engines and eight 2048-bit XMX engines per core. Its gains also come from feeding those engines more effectively: more resident threads hide stalls, and variable register allocation lets shaders trade registers per thread against the number of threads kept active. [1] The shared L1/SLM capacity increased by 33% from 192 KiB to 256 KiB, while its area increased only 5%, raising effective density by 27%. L1 retains reused cache lines, while software-managed SLM lets a thread group share data locally. Both reduce traffic to more distant memory. Allocating more SLM per group can also limit how many groups reside on a core at once. [1], [37] The GT1 tile carries 4 MiB of L2 against 16 MiB on the GT2 tile. GT1 divides its L2 cache into four 1 MiB banks, while GT2 uses eight 2 MiB banks. Each bank contains 128 macros, but each N3E macro stores 16 KiB, twice the Intel 3 macro’s 8 KiB capacity. The N3E macro is only 54% larger while holding twice as many bits, giving it 30% higher density: ~23.7 Mbit/mm² versus 18.3 Mbit/mm². Including bank-level circuitry, the gap widens to ~16.9 Mbit/mm² on GT2 versus ~10.4 Mbit/mm² on GT1. GT2 gains density with its macros storing more bits per unit area, and those macros occupy more of each cache bank. Larger macros spread decoder and sense-amplifier overhead across more storage, while a more compact bank layout reduces the share spent on control and routing. The compromise is longer wordlines and bitlines that carry more capacitance. [34] I/O tile Panther Lake uses two I/O tile variants, both fabricated on TSMC N6. The smaller one provides 4 PCIe 5.0 and 8 PCIe 4.0 lanes and serves lower-tier systems as well as those without a discrete GPU, while the larger one adds 8 PCIe 5.0 lanes, bringing the total to 20 lanes, for discrete-GPU connectivity. Panther Lake SKUs with the larger 10- or 12-Xe GPUs use the smaller I/O tile. [38] The smaller I/O tile adds a PCIe 4.0 block and a Thunderbolt block to Lunar Lake’s I/O layout, providing four additional PCIe 4.0 lanes and another Thunderbolt 4 port. Its repeated N6 blocks retain nearly identical areas and layouts. Reusing these proven PHYs and controllers avoids porting and requalifying external interfaces on 18A, where faster digital logic offers less benefit to circuits constrained by the off-chip link. [38] SemiAnalysis’s teardown lab (STEEL) dives deep into the world’s advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. We’re hiring technical experts from system to transistor and everywhere in between. Check out our Careers page. Panther Lake offers scalability and modularity through its disaggregated packaging that partition compute, GPU, and I/O silicon into separate tiles allowing for a suite of tile configurations. This partitioning makes the package part of Intel’s node economics as it determines how much leading-edge wafer area each product consumes, which functions can remain on other processes, and how much configuration freedom Intel can offer from a shared set of tiles. Furthermore, fabricating the compute and GPU tiles separately confines the new 18A process to the compute tile and allows graphics and I/O to use other, more established, and more cost-effective processes. For Panther Lake, the GPU and I/O tiles are assembled alongside the compute tile on a passive silicon base using Foveros-S. Intel’s current technology brief lists a nominal 36 µm pitch for Foveros-S. Through-silicon vias (TSVs) in the base connect the fine wiring above to the larger package connections below. The functional tiles sit side by side on that passive base in a 2.5D configuration. [39] Our cross-section through the compute and GPU tiles shows the package’s wiring hierarchy. Microbumps connect each active tile to the passive silicon base; its fine redistribution layer (RDL) carries the short, dense tile-to-tile links. TSVs carry connections through the base to the package substrate, which fans them out to the much coarser motherboard solder joints. The base supplies interconnect, while computation remains in the active tiles above it. [39] At the compute-tile edge, the higher-magnification inset shows a local microbump spacing of approximately 25.24 µm and a feature width of 12.33 µm. These local spacings are finer than Intel’s nominal Foveros-S value. The X-ray fields further confirm tighter neighboring bumps, consistent across every die-to-die area found on each tile. Additional X-ray analysis is offered after the paywall. Putting the memory controller beside the CPU removes the D2D transfer that CPU memory requests required in Meteor Lake and Arrow Lake. This avoids the extra transmitter, receiver, and link traversal, saving interface energy and latency. Panther Lake’s separate GPU still crosses a D2D link to reach DRAM, so its larger local caches also help contain package traffic. [1], [40] Smaller dies are less likely to contain a random fatal defect, and screening them before assembly prevents one bad tile from consuming a complete package of good silicon. Reuse also spreads design and qualification work across more products. Against those gains, Intel pays for the passive base, D2D circuits, extra bonding and test steps, and losses during assembly. Cost per working product across the portfolio captures the combined effect of wafer yield, reuse, test, and assembly. [29] Wildcat Lake packaging Intel launched Core Series 3, formerly Wildcat Lake, on 16 April 2026 for value mobile and edge systems. Wildcat Lake keeps 18A but removes the passive base and combines more functions on one die to simplify the package. The two products therefore reveal two distinct ways to commercialize the same leading-edge process. [41] Wildcat Lake’s 18A die combines up to two Cougar Cove P-cores, four Darkmont LP E-cores, two Xe3 cores and a smaller NPU. A separate platform-controller die supplies I/O, connected through UCIe, Intel’s first processor implementation of the standard. Consolidating graphics remove a tile boundary and the passive base, reducing assembly complexity for a modest-bandwidth value product. It also ties CPU and graphics scaling to the same die, giving up Panther Lake’s ability to swap in a much larger GPU. [42], [43] In July 2021, Intel CEO Pat Gelsinger set out an ambitious process roadmap aimed at regaining performance leadership by 2025, later described as five nodes in four years. Five years and one CEO later, Intel’s comeback story is not as unambiguously positive as Pat may have hoped. [44], [45] Intel once set the pace for process technology, bringing high-k metal gate technology and FinFETs into volume production years ahead of the rest of the industry. Its 22 nm FinFET process reached consumers with Ivy Bridge in 2012. [46] Intel’s integrated device manufacturing (IDM) model allowed its architects and process engineers to co-optimize products and processes. Starting with Sandy Bridge, Intel dominated x86, while AMD struggled with Bulldozer. That lead faltered at 14 nm and broke at 10 nm. Intel targeted a massive 2.7× density increase, but the node arrived years late and required several revisions before it could support Intel’s full lineup. This delay forced Intel to stretch 14 nm across six generations, while TSMC moved ahead in process technology and AMD recovered in x86. By 2019, Intel was still shipping 14 nm across most of its product stack, with its 10 nm client ramp focused on Ice Lake mobile processors. Meanwhile, TSMC was shipping N7 and N7+, and AMD’s Zen 2 compute chiplets used N7 to raise core counts and improve efficiency. Intel’s process failures were central to its decline, but unsound business decisions furthered their downward slide. Product delays compounded product mistakes, pushing client, server, and FPGA roadmaps off schedule. Several attempts to enter AI (Nervana and Gaudi) and networking (Tofino) also failed to establish lasting businesses. Intel’s recovery has focused on consumer CPUs and advanced packaging. Tiger Lake, Alder Lake, Lunar Lake and now Panther Lake have restored Intel’s consumer roadmap. On the process side, Intel 4 shipped with Meteor Lake, Intel 3 with Granite Rapids and Sierra Forest, and Intel 18A with Panther Lake. Intel has also made advanced packaging part of its foundry offering. However, Intel is still playing catch-up in servers. Several Xeon generations arrived years late and trailed contemporary AMD and Arm server CPUs in performance, efficiency, and core count. The process roadmap is back, but Intel does not hold the same process-technology leadership position it held prior to 10 nm. The introduction of gate-all-around nanosheets and backside power delivery are two of the biggest changes to transistor integration in a decade. Intel took on both changes at once: 18A paired its first RibbonFET with PowerVia in Panther Lake. Panther Lake is a substantial manufacturing milestone. Our cross-sections show how RibbonFET and PowerVia reshape local contacts and wiring, while the floorplans show where architectural consolidation and process choices save area. A sustained competitive lead depends on product performance, cost, yield, and the next implementation. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page.. [1] Intel, “Intel Tech Tour 2025 Panther Lake recap,” Doc. 866361, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/866361/ITT_2025_Panther_Lake_Recap1.pdf [2] Intel, “Core Ultra processors Series 3 datasheet, volume 1,” Doc. 872188-001, Jan. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/872188/872188-001.pdf [3] N. Horiguchi and E. Beyne, “Backside power delivery: How to power chips from the backside,” imec Reading Room, Nov. 25, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/how-power-chips-backside [4] W. Hafez et al., “Intel PowerVia technology: Backside power delivery for high density and high-performance computing,” in Proc. IEEE Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2023, pp. 1–2, doi: 10.23919/vlsitechnologyandcir57934.2023.10185208. [5] K. Fischer et al., “Intel 18A platform technology featuring RibbonFET (GAA) and PowerVia for advanced high-performance computing,” in Proc. Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2025, pp. 1–3, doi: 10.23919/vlsitechnologyandcir65189.2025.11075006. [6] K.-F. Cheng, C.-L. Teng, H.-Y. Huang, and H.-C. Chen, “Metal oxide composite as etch stop layer,” U.S. Patent 12 176 247 B2, Dec. 24, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12176247B2/en [7] S. W. King, “Dielectric barrier, etch stop, and metal capping materials for state of the art and beyond metal interconnects,” ECS J. Solid State Sci. Technol., vol. 4, no. 1, pp. N3029–N3047, 2015, doi: 10.1149/2.0051501jss. [8] A. V. Mule’, D. J. Towner, D. Seghete, C. R. Ryder, and A. A. Gonzalez, “Multi-layer etch stop layers for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20220102343 A1, Mar. 31, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20220102343A1/en [9] C.-C. Wang and J. H. Wang, “Interconnect structure with dielectric cap layer and etch stop layer stack,” U.S. Patent Appl. 20230253247 A1, Aug. 10, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20230253247A1/en [10] Y. J. Wu, K.-F. Cheng, C.-C. Lee, H.-K. Chang, and H.-Y. Huang, “Etch stop layer for interconnect structures,” U.S. Patent Appl. 20240332070 A1, Oct. 3, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240332070A1/en [11] M. G. Rainville, N. Shankar, K. S. Reddy, and D. M. Hausmann, “Deposition of aluminum oxide etch stop layers,” U.S. Patent Appl. 20180197770 A1, Jul. 12, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20180197770 [12] J. S. Leib et al., “Conductive lines having molybdenum liner and tungsten fill for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20240429126 A1, Dec. 26, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20240429126 [13] M. Naik, “Cobalt enables power and performance scaling at single-digit logic nodes,” Applied Materials, Dec. 17, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://www.appliedmaterials.com/us/en/blog/blog-posts/cobalt-enables-power-and-performance-scaling-at-single-digit-logic-nodes.html [14] Lam Research, “Breaking through AI’s invisible barrier with molybdenum,” Lam Research Newsroom, May 6, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://newsroom.lamresearch.com/molybdenum-metallization-ai-revolution [15] P. Yashar, G. Malyavanatham, and H. Vijwani, “Integrated circuit interconnect structures with niobium barrier materials,” U.S. Patent Appl. 20240112951 A1, Apr. 4, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240112951A1/en [16] Applied Materials, “Applied Materials unveils chip wiring innovations for more energy-efficient computing,” Applied Materials Investor Relations, Jul. 8, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://ir.appliedmaterials.com/news-releases/news-release-details/applied-materials-unveils-chip-wiring-innovations-more-energy [17] Samsung, “Samsung showcases AI-era vision and latest foundry technologies at SFF 2024,” Samsung Semiconductor, Jun. 13, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://semiconductor.samsung.com/news-events/news/samsung-showcases-ai-era-vision-and-latest-foundry-technologies-at-sff-2024/ [18] C. W. Yeung et al., “Channel geometry impact and narrow sheet effect of stacked nanosheet,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2018, pp. 28.6.1–28.6.4, doi: 10.1109/iedm.2018.8614608. [19] S. Mochizuki et al., “Evaluation of (110) versus (001) channel orientation for improved nFET/pFET device performance trade-off in gate-all-around nanosheet technology,” in Proc. Int. Electron Devices Meeting (IEDM), Dec. 2023, pp. 1–4, doi: 10.1109/iedm45741.2023.10413854. [20] D. G. Ouellette et al., “Fabrication of gate-all-around integrated circuit structures having molybdenum nitride metal gates and gate dielectrics with a dipole layer,” U.S. Patent 12 051 698 B2, Jul. 30, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12051698B2/en [21] imec, “Advancing the CFET-based device roadmap with novel integration modules and standard-cell architectures,” imec, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/advancing-cfet-based-device-roadmap-novel-integration-modules-and-standard-cell [22] A. Reznicek, X. Miao, C. Lee, and J. Zhang, “Wrap around contact for nanosheet source drain epitaxy,” U.S. Patent 11 302 813 B2, Apr. 12, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US11302813B2/en [23] J. A. Kittl, J. G. Hong, D. R. Palle, and M. S. Rodder, “Methods for varied strain on nano-scale field effect transistor devices,” U.S. Patent 9 978 833 B2, May 22, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9978833B2/en [24] S. Gandikota et al., “Method of reducing metal gate resistance for next generation NMOS device application,” Int. Patent Appl. WO 2024/137272 A1, Jun. 27, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/WO2024137272A1/en [25] J. Zhang et al., “Full bottom dielectric isolation to enable stacked nanosheet transistor for low power and high performance applications,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2019, pp. 11.6.1–11.6.4, doi: 10.1109/iedm19573.2019.8993490. [26] C. Yoo, J. Chang, Y. Seon, H. Kim, and J. Jeon, “Analysis of self-heating effects in multi-nanosheet FET considering bottom isolation and package options,” IEEE Trans. Electron Devices, vol. 69, no. 3, pp. 1524–1531, Mar. 2022, doi: 10.1109/ted.2022.3141327. [27] S. S. Pradhan, D. B. Bergstrom, J.-S. Chun, and J. Chiu, “Tungsten gates for non-planar transistors,” European Patent Appl. EP 3 506 367 A1, Jul. 3, 2019. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/EP3506367A1/en [28] L. Schloss and X. Ba, “Tungsten films having low fluorine content,” U.S. Patent 9 754 824 B2, Sep. 5, 2017. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9754824B2/en [29] Intel Foundry, “Accelerating AI and HPC with advanced process and packaging technologies,” Doc. 367370-001US, Jun. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-11/intel-foundry-hpc-ai-brief.pdf [30] M. Lofrano, X. Chang, H. Oprins, and Z. Tokei, “Mitigating the thermal bottleneck in advanced interconnects,” imec, Sep. 28, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/mitigating-thermal-bottleneck-advanced-interconnects [31] S. Bair, “Intel at ISSCC 2025: Navid Shahriari invited talk, eight papers, forums, panelist & product details,” Intel Community, Feb. 19, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://community.intel.com/t5/Blogs/Tech-Innovation/Edge-5G/Intel-at-ISSCC-2025-Navid-Shahriari-Invited-Talk-Eight-Papers/post/1667592 [32] D. Chandra, E. Potladhurthi, D. R. S. Reddy, and K. S. Rengarajan, “Tunable negative bitline write assist and boost attenuation circuit,” U.S. Patent Appl. 20160203857 A1, Jul. 14, 2016. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20160203857A1/en [33] Synopsys, “Advantages of firmware-based training in high-speed DDR IP,” Synopsys IP Technical Bulletin. Accessed: Sep. 14, 2026. [Online]. Available: https://www.synopsys.com/articles/firmware-based-training-ddr-ip.html [34] N. Muralimanohar, R. Balasubramonian, and N. P. Jouppi, “CACTI 6.0: A tool to understand large caches,” Hewlett-Packard Laboratories, 2009. Accessed: Sep. 14, 2026. [Online]. Available: https://users.cs.utah.edu/~rajeev/cacti6/cacti6-tr.pdf [35] Intel, “Intel Tech Tour 2024 Lunar Lake AI hardware accelerators,” Doc. 824436, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/824436/2024_Intel_Tech%20Tour%20TW_Lunar%20Lake%20AI%20Hardware%20Accelerators.pdf [36] Y.-H. Chen, J. Emer, and V. Sze, “Eyeriss: A spatial architecture for energy-efficient dataflow for convolutional neural networks,” in Proc. 43rd ACM/IEEE Annu. Int. Symp. Comput. Archit. (ISCA), Jun. 2016, pp. 367–379, doi: 10.1109/isca.2016.40. [37] Intel, “Introduction to the Xe-HPG architecture,” Doc. 758306, Nov. 4, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/developer/articles/technical/introduction-to-the-xe-hpg-architecture.html [38] Intel, “Core Ultra processors Series 3 for the edge,” Doc. 855291. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/855291/Intel%C2%AE%20Core%E2%84%A2%20Ultra%20Processors%20Series%203%20for%20Edge%20Overview_2.pdf [39] Intel Foundry, “Foveros technology brief,” Doc. 366411-001US, Feb. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-07/foveros-25d-product-brief.pdf [40] D. Das Sharma, “UCIe: Building an open chiplet ecosystem,” UCIe Consortium, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.uciexpress.org/_files/ugd/0c1418_c5970a68ab214ffc97fab16d11581449.pdf [41] Intel, “Intel launches Intel Core Series 3 processors,” Intel Newsroom, Apr. 16, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-launches-intel-core-series-3-processors-changing-the-game-for-everyday-computing.html [42] Intel, “Core Series 3 launch press deck,” Apr. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://download.intel.com/newsroom/2026/Intel-Core-Series-3/Intel-Core-Series-3-Launch-Press-Deck.pdf [43] Intel, “Intel outlines architectures for agentic AI at Hot Chips 2026,” Intel Newsroom, Aug. 24, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-outlines-architectures-for-agentic-ai-at-hot-chips-2026.html [44] Intel, “Intel accelerates process and packaging innovations,” Intel Investor Relations, Jul. 26, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/filings-reports/all-sec-filings/content/0001193125-21-224438/d199788dex991.htm [45] Intel, “Intel reports third-quarter 2021 financial results,” Intel Investor Relations, Oct. 21, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/1505/intel-reports-third-quarter-2021-financial-results [46] Intel, “3rd generation Intel Core processors bring exciting new experiences and fun to the PC,” Intel Investor Relations, Apr. 23, 2012. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/577/3rd-generation-intel-core-processors-bring-exciting
Wall Street week ahead: consumer confidence, inflation, employment updates
NEW YORK — Wall Street has a busy week ahead with important updates on inflation, the jobs market and consumer confidence.
Here’s our locks for week four of college football
The scoreboard operators are going to be busy this week
America’s newest soccer star, plus a bad night for Green Bay
The Pulse Newsletter 📣 | This is The Athletic’s daily sports newsletter. Sign up here to receive The Pulse directly in your inbox. Good morning! Don’t get fined today. Coming up: 😮 A Falcons blowout win? ✅ The latest MLB playoff clinches 👋 Say hello to Cavan Sullivan Geoff Stellfox / Getty Images It’s a busy day, so this will be short. Important stuff from last night: The Falcons routed the Packers on the road, 35-14, in one of the more surprising results of the early NFL season. A lesson learned: Having a competent quarterback to go with Atlanta’s...
ACSH in the media: British Medical Journal, RealClearScience (and Health), plus more podcasts
From a weedkiller paper that cannot carry the weight of its headline to a PFAS rule that treats cookware like a biohazard, we've been busy. Here’s a look at some of our recent media appearances, including in the British Medical Journal (BMJ), RealClearHealth, RealClearScience, SacTown Talks and the Health Policy Podcast.
49ers Get Concerning Injury News Ahead of Cardinals Game
Ahead of Sunday’s matchup with the Arizona Cardinals, the San Francisco 49ers kicked off preparations Wednesday, and their initial Week 3 participation report showed a busy list of absences. 49ers Lose Another Defensive Tackle to IR San Francisco placed defensive tackle C.J. West on injured reserve Wednesday with a knee injury, the ninth player the […] The post 49ers Get Concerning Injury News Ahead of Cardinals Game appeared first on HEAVY.
Digital Foundry: Fire Emblem Fortune’s Weave is 720p docked, 540p handheld and 30fps, but uses DLSS
The tech-focussed team at Digital Foundry has been busy examining the recently released Fire Emblem Fortune’s Weave on the Nintendo Switch 2. The strategic RPG runs at 720p when played in docked mode…
Melania Trump’s Busy Schedule: A New Show, a Foster-Care Bill and Reading Executive Orders
In a burst of activity this week, the enigmatic first lady told Americans what she has been up to after a quiet summer. Her activities have included filming a new documentary series about her life.
It's clear, Liverpool have signed an incredible African star
Liverpool have signed an absolute gem, it's now becoming official. The Reds have been busy over the course of the last 12 months. We've seen a real generational change occur at Anfield. Liverpool's te...
Prepping Now for Small Business Saturday 2026 and the Holiday Season - Small Business & Entrepreneurship Council
By Barbara Weltman – Small Business Saturday this year is November 28, the first Saturday after Thanksgiving (November 26). The day follows what’s come to be known as Black Friday. November 30, is Cyber Monday. All in all, small business owners and their teams have a busy extended weekend to plan for. Many small businesses report […]
Exercise snacks for better heart health
Exercise snacks are short bursts of activity throughout the day that can support heart health and make movement easier to fit in a busy day.
Peters' properties under foreclosure are on the market for over $42 million
Most of the properties are located in the downtown area, while another one is situated at the corner of the busy Cerrillos Road-Rodeo Road intersection.
Science Vs on the 49ers Substation: Anatomy of a Hatchet Job
In August, Pablo Torre Finds Out and Science Vs released an episode about my theory that electromagnetic fields from the electrical substation beside the 49ers facility may be contributing to the team’s run of soft-tissue injuries. As the originator of the theory, I was also a subject of the episode. I sat was interviewed by Wendy Zukerman and Rose Rimler of Sciene Vs. I sent them research, connected them with scientists, and spent hours digging through the City of Santa Clara’s and Silicon Valley Power’s records to help clarify critical details. Both Wendy and Rose came off as affable and professional, showing curiosity during the interviews, with Wendy going out of her way to question the “conspiracy theory” framing itself. Then they titled the episode We Solve the 49ers Viral Conspiracy Theory. I was familiar enough with their catalog that I never expected them to agree with my theory, but I did expect them to give it a fair hearing and to deliver their findings honestly. On both counts they came up short. They were not directly dishonest in anything they said, but rather in what they left out, in how what remained was cut, and in the picture painted by those two things in combination. They asked me to recorded the interview on my phone for better audio quality, and I held on to my copy for reference later. That turned out to be a fortuitous decision. Here is the raw audio of my first interview, unedited*. Only my side was recorded, so their questions aren’t on it, but you can generally infer them from the answers, and every claim I make below about what I said can be checked against my statements in this clip. (Note: Wendy had connection trouble at the beginning of the interview and was cutting in and out, which accounts for the false starts.) 0:00 -1:19:13 Audio playback is not supported on your browser. Please upgrade. Science Vs is a fun show. It is pitched at roughly a high-school understanding of science, for an audience that is skeptical, Snopes-oriented, and worried about misinformation. Take a claim circulating online, interview a supporter of the claim, interview consensus scientists, and then tell people which side of the line it lands on. I have listened to their episodes on raw milk, seed oils, 5G and other contested issues in the wellness space. I have problems with all of them, but each at least made an honest attempt to represent the actual range of scientific opinion by talking to credentialed scientists with differing perspectives. Dissenting researchers were heard from, answered, and often given a chance to respond. This episode did not do that. This article is not a relitigation of the science. I have written extensively about that already. This post is for the record. It is simply an accounting of what was wrong with their episode. Contents Is there a power plant next to the 49ers practice facility? — the clearest single example of getting something objectively wrong For the record — a high-level overview of all of the problems with their investigation Draw your own conclusions — why they had to make this episode at all What they left out about childhood leukemia — the exposure threshold, and playing games with statistics to minimize sick children What they left out about the mechanism — the body of literature they refused to cover, and evidence for the mechanism used against it The scientists Science Vs interviewed and did not air — four credential scientists who support myhe theory, recorded and cut, or not even called How they misrepresented me and my case — an answer severed from its question, and three telling edits How you would actually study the injuries — it doesn’t actually matter which team is the most injured, overall The theory: magnetic fields, oxidative stress, and collagen Since the episode never states my theory, here it is below. Those who are familiar with my work can skip this section. Electrical equipment produces magnetic fields, and those fields induce faint electrical currents in anything that passes through them, including people. My argument goes further than induced current. Mitochondria — the structures that generate a cell’s energy — run on continuous flows of electrons and protons, and those flows carry faint electromagnetic fields of their own. Maxwell’s principle of superposition shows that when two fields share the same space, they add together. An external field does not need to be strong to alter an internal field, it only needs to be present. The electron transport chain inside the mitochondria leaks a small fraction of its electrons by design, and those become reactive oxygen species — free radicals, which healthy cells use as signals. External magnetic fields cause the rate of leakage to change, increasing free radicals. When free radicals accumulate faster than the cell’s antioxidant systems can clear them, the result is oxidative stress. Oxidative stress is a recognized driver of chronic illness, including cardiovascular disease, neurodegeneration, diabetes and cancer, and it is in every medical school curriculum. One of its ordinary effects in connective tissue is that it switches on matrix metalloproteinases — MMPs, the enzymes that break collagen apart — while suppressing new collagen synthesis. Tendons are made of collagen. An athlete loading his soft tissue heavily six days a week is already creating oxidative stress in the tendons, so the addition of magnetic field exposure compounds the damage and inhibits repair, making him more susceptible to injury when enormous force lands on a tendon in a fraction of a second. That is the theory. We know that EMF causes oxidative stress, and we know that oxidative stress degrades collagen. The only thing missing is a study showing that direct connection. I have never claimed certainty that the substation is contributing to the elevated injury rate. I do believe it is likely, and I believe it warrants caution, and that a revenue machine like a major NFL team can easily afford to remove the exposure out of precaution. Is there a power plant next to the 49ers practice facility? Here is the clearest single instance of the problem with this episode. It requires no knowledge of electromagnetic fields at all. This story first came to me through Jon Feliciano, a former 49er, in an interview on Willard & Dibs on 95.7 The Game. Asked about why the 49ers are always injured, he said players used to joke that it was the power plant behind the practice fields. Wendy Zukerman corrects him on air. “It’s important to say that it’s not a power plant near the 49ers site.” Torre then asks her to explain the difference between a substation and a power plant. Her answer: a power plant generates electricity and transmits it to a substation, which converts the voltage into something your house can use and sends it on to your home or your business. There are two problems with that. The first is that there is a power plant on that site. The Gianera Generating Station is a natural-gas-fired peaker plant owned by Silicon Valley Power, and it has been there since 1986. I have published aerial photographs of the location from 1987 in which the gas plant is the only thing standing, before the practice facility was even there. I even mentioned the gas plant in my first interview. (Feliciano has since gone on record about this issue, and it is clear he had the substation in mind rather than the gas plant.) The second is that her definition describes a distribution substation, and the facility beside the 49ers is not that. It is the Northern Receiving Station, which takes in bulk power from outside the city’s grid and delivers it to distribution substations. Silicon Valley Power’s own map distinguishes receiving stations from substations, and Rose Rimler even reads the label out loud in the episode when she walks through that map on air. A few minutes before the map segment, Zukerman tells Torre: “like I said, we fact check everything.” Well, maybe not everything. I made a mistake On the morning of July 6th, at 10:20, I sent Rose and Wendy two studies. During the interview I had been asked which human studies show oxidative stress from electromagnetic fields, and I had not been able to name one on the spot. Rose emailed asking for the studies, I quickly searched for a couple, and I wrote that I thought these were the most relevant from that search. Unfortunately, I was busy and did not read either one closely at first. I picked them because they were topically relevant — one on substation workers, one on power plant workers. Neither were great studies, and their problems go past the ones raised in the episode. That was careless on my part. There is context that did not make the episode, though. Before that email I had been on a Zoom call with Rose talking about EMF and oxidative stress, and I pointed her to Dr. Henry Lai at the University of Washington, who has spent years aggregating the literature on this question. His tallies show that roughly 90% of studies since the late 1990s find oxidative effects from electromagnetic field exposure — hundreds of studies, systematically counted. Rose told me she was already aware of his work. So when she asked for studies, I understood her to have the aggregate view already and that she would report anything within that context. Not reading those two carefully was still a mistake, but the larger mistake was assuming the episode would be based on a thorough review of the actual body of literature, rather than on whatever I happened to send that morning. The second email At 1:49 that same afternoon — three hours and twenty-nine minutes after the first — I sent them a second email that I had been preparing for a while. It was a structured document in six numbered sections, written in response to a request they had made two weeks earlier, laying out my entire argument with citations attached to every link in the chain. The episode aired on August 13th, five weeks later, and not a single item from the second email is in it. Here is how it opens: The full email is included at the bottom of this post in Appendix B. Nearly 1,500 words in total. It contains two named mechanisms with the physics behind them. Occupational studies in humans. The literature on oxidative stress and collagen. A section addressing the strongest counter-evidence against my own theory, which I raised myself. And a closing section stating plainly what the theory cannot yet show. My entire argument, in writing, with detailed citations for every claim, provided to them five weeks before broadcast, and none of it made it into the episode. That is the single largest omission, but it is not an isolated one. The whole episode is riddled with similar problems, and the conclusion they came to is not merely a difference of opinion about the scientific evidence. Through omission and through strategic editing, Science Vs misinformed its audience — about what the evidence shows, about what I argued, and about who they spoke to. That is a notable outcome for a show whose stated purpose is correcting misinformation. For the record I am not going to tell you that Science Vs set out to discredit me, or that they had come to their conclusion before they reported the story, or that they used misleading editing to make me look like a man retreating from his own theory. I cannot know what was in anyone’s head, and I am not going to pretend otherwise, either. What I can tell you is what is on the record. They asked me for evidence and aired the weakest thing I sent. They interviewed three scientists who supported my theory and aired none of them. They discussed childhood leukemia without ever saying the exposure level at which it appears. And they took an answer I gave weeks before Ken Karipidis, the one EMF scientist who was put on air, was interviewed, and placed it directly after his critique, where it comes off as a major concession. A friend of mine who has worked as a journalist for thirty years read that last one and called it sleazy. I agree with her. Those are just the four issues that are impossible to defend as pure editorial decision, but they are not the only issues. The most glaring issues stem from what they left out: The exposure level at which the childhood leukemia association actually appears — three to four milligauss, a number the episode never states despite it being much lower than what I measured. The mechanism itself: The episode gets as far as “oxidative stress could weaken collagen,” which leaves it sounding like speculation, rather than a known pathway. The second email, and all the studies in it. Dr. Paul Héroux at McGill, whose work my proposed mechanism rests on, whose contact details I supplied, and who was never called. Dr. Beatrice Golomb at UC San Diego, who runs a research group on oxidative stress and mitochondrial function and has specific expdertice in collagen, interviewed and not aired. Dr. David Carpenter at Albany, the most prominent academic voice on the harm from magnetic field exposure, interviewed and not aired. Dr. Joel Moskowitz at Berkeley, interviewed and not even credited. The specific, testable condition I put in writing that would make me abandon the theory. My own unprompted statement of the theory’s evidentiary gap. My caveats about my own measurements. My ranking of EMF as one factor among several rather than the only one. The new equipment installed at those facilities between 2010 and 2014, and the sharp rise in system load from 2013 onward. But that is not all. What they kept, they selectively edited to serve a narrative that was not served by the raw transcripts of the interviews. A description of thousands of commercial routers in a workplace, reduced to the Wi-Fi in your house. My own acknowledgment, multiple times, that "I'm not a scientist" clipped in an episode that spends considerable energy pointing out that I am not a scientist. And a qualification I volunteered about my own measurements, cut from my answer and delivered later by their EMF expert as a correction. Together their edit produce a portrait of a wellness guy with Wi-Fi phobia and two bad studies, backing away from his theory the moment a “real” scientist looked at it. A practice facility where nothing changed because no new substation was built. Injuries written off as random because the 49ers were not quite the single most injured team in the league over the period in question. That portrait is false even though almost no individual statement made in the episode is. Draw your own conclusions At the top of the episode, Pablo Torre says his show had been flooded with requests to investigate the substation — that it was the thing they were asked to look into over and over again. Neither show went hunting for this story. It arrived from their own audience, in volume, and it could not be waved off. A thread I posted on X reached twenty-two million people. A guy with a gaussmeter and a brand-new Substack obligated a Pultizer prize winning program to spend an hour on a question about player health, that is considered fringe enough that most media operations won’t touch it. Pablo Torre Finds Out could not ignore it. So Science Vs came in and ran a “debunking” operation instead of an investigation. Everything below is what had to be left on the cutting room floor to deliver the “debunking”. They could not ignore it. So they tried debunked it instead. The demand was strong enough to force an episode, and since the episodes release the 49ers have sustained more injuries, including season ending ones, and interest has only grown. Demand from fans and playets is strong enough to force a better investigation from someone else. An omission is not a lie until you find out what was omitted. What follows is the detailed record so you can see the full picture. Draw your own conclusions. I have drawn mine. I am going to keep publishing. A note about Pablo Torre Finds Out After the episode aired I posted publicly, calling out Pablo Torre Finds Out for concerns I had about the integrity of their investigation, and about an interview directly with Pablo Torre which had been offered but never happened. I have since spoken with a producer at PTFO. The offer had rested on a misunderstanding about where things stood between us, and it fell away as the Science Vs part of the production widened past the science. He apologized for the miscommunication and I accepted. The producer also confirmed to me that they did essentially hand off the entire investigation to Science Vs for narrative purposes — so Pablo would be genuinely curious or potentially surprised by their findings — while still taking responsibility for what went out under their name. I appreciated the candor and the accountability, and I am comfortable with where we left things. So this post is not about PTFO. My disagreement is with Science Vs. What they left out about childhood leukemia Childhood leukemia appears at three milligauss. They gave no number at all. 1. They built an EMF ruler, then discussed childhood cancer without it. The sequence on air went like this: First I measured almost 9 mG, then I measured up to 50 milligauss. Torre reacts with concern — “that sounds high.” Cut to Karipidis: the public limit is 2,000 milligauss. Torre reacts again — “What happens at 2,000?” Karipidis explains that nothing happens at 2,000, that safety factors are built in. Then: at more than 50,000 milligauss you get flickers of light in the retina, and higher still, nerve stimulation. The listener now has a ruler (their ruler) to measure these numbers with. Fifty is nothing by their ruler. Then the episode turns to childhood leukemia and states, accurately, that there is a real association — but tellingly, they never give the exposure level at which that association appears. Childhood leukemia appears at three milligauss. They conveniently left that out. The pooled analyses that produced the World Health Organization’s carcinogen classification found roughly a doubling of childhood leukemia risk above three to four milligauss. That is the number that belongs in that segment, and it is more than ten times below the reading that had just been dismissed as trivial. I gave them that number myself, on tape, in the interview. Describing my own threshold, I said my comfort level for long-term chronic exposure is three to four milligauss, but preferably one. 2. Six children in thirteen million. The episode reports that these fields might explain one to four percent of childhood leukemias, then reframes it as a German estimate of perhaps six cases among thirteen million children. Torre, to his credit, is uncomfortable. What never gets explained is why that number is small. Almost no children lives above three milligauss in Europe. Fewer than two children in a hundred, in the Italian data. So even if the risk to those children doubles, the number of additional cases across an entire country stays small — not because the hazard is small, but because hardly anyone is exposed to it. Count the whole population and the few who are exposed disappear. And the reason hardly anyone is exposed is that siting rules keep housing away from transmission lines. In Europe, at least. The Dutch government has a standing precautionary policy against building new homes in any zone where the annual average magnetic field exceeds 4 milligauss — the same number the episode never mentioned. Denmark and Norway treat 4 milligauss as the level that triggers a look at mitigation. That is five hundred times below the ICNIRP figure quoted on air. The United States has no federal equivalent. That is evidence of infrastructure siting policy working. It is not evidence that there is no hazard. It is evidence that we already act as though there is one. If you listen to the raw audio you will hear that my proposed solution is EMF exposure is to build better infrastructure. What they left out about the mechanism 3. They accused me of cherry-picking, and then cherry-picked themselves. On air, Zukerman tells Torre that people who worry about electromagnetic fields dismiss the studies showing null results and collect the ones showing harm, and that this is why you have to be careful not to cherry-pick. They had two papers I had rattled off in a hurry, and a second email containing a carefully chosen set. They ran the two weakest, graded them on air, and presented the result as the state of the evidence for not only my theory, but the whole question of oxidative stress from magnetic fields. That is cherry-picking from my emails. The bigger picture is what they did with the literature as a whole. Zukerman acknowledges it exists, dismisses it, and disposes of it in a single stroke. You can go online right now, she tells Torre, and find scores of studies showing these fields increase oxidative stress. The issue, she says, is that they are not studies in people. Many of them are in people. The occupational studies in my second email are in people. That email had been in her inbox for five weeks. She waved off the literature on a factual claim that the documents in her possession contradict. (I have written separately about the evidentiary standard at work here). The effect was that they essentially baited me: ask the subject to supply the evidence, take the weakest thing he sends, and let that stand as a proxy for the whole argument. Wendy has been doing this show for ten years and clearly knows how to extract what she needs for her desired narrative. 4. They presented the collagen-improvement research as a gotcha, but I had already addressed it. The episode treats the existence of studies showing that EMF can improve collagen as a surprise that undercuts me, but I had pre-emptively addressed that five weeks earlier in the email they ignored. Those studies use measured, high-intensity pulsed dosing. The mechanism by which they work is oxidative signalling. The cell reads a controlled rise in reactive oxygen species as a warning, upregulates its antioxidant defenses, mounts a repair response, and the therapy stops before the system is overwhelmed. The key point is that it induces an oxidative response, which means those studies are actually evidence for my proposed mechanism, not against it. A field that produces a therapeutic effect cannot be biologically inert (which is the implication when they say “Nothing happens at 2,000 milligauss). Chronic ambient exposure is the same pathway with no off switch, and it is most consequential during the evening and while sleeping, when the body is in repair mode and the exposure does not stop. Section 5 of my email is titled What about the study showing improved collagen synthesis. I raised the counter-evidence myself, explained why I did not think it refuted the theory, and wrote that I was disappointed the question had not come up in the interview. That is worth holding against the cherry-picking charge in the item above: the studies they presented as inconvenient for me were studies I had gone out of my way to put in front of them. 5. Section 1 of my email stated a critical argument that was never put to the expert directly responsible for it. My email says the exposure limits exist to prevent acute effects and do not address chronic exposure at all, and that my dispute is with the entire framework. Zukerman gestures at this once. After Karipidis gives the 2,000 milligauss figure, she tells Torre that I would object because those levels do not capture “more subtle effects.” That is not my argument, and “subtle” is doing a lot of work here. My argument is that the limits are built to prevent acute effects — nerves firing, muscles twitching, etc — and were not designed to address chronic exposure at all. In fact, ICNIRP’s own documents state as much themselves. Mine is a structural objection to what the standard measures, reduced as a concern about subtlety, it becomes a matter of degree, rather than a categorical difference. They interviewed Ken Karipidis, vice chair of ICNIRP — the body that writes those limits. He was asked what the limit is, but he was never asked how it applies to chronic exposure. The scientists Science Vs interviewed and did not air 6. They interviewed four officials of the standards body. The episode credits roughly a dozen researchers. Four of them are associated with ICNIRP. Ken Karipidis is the vice chair. Rodney Croft chaired ICNIRP from 2020 to 2024 and led the development of its current guidelines. Dan Baaken is ICNIRP’s scientific secretary. Frank de Vocht sits on the Main Commission. One of them speaks in the episode. Their institution’s position is more than adequately represented — the 2,000 milligauss figure, the safety factors, the assurance that nothing happens below the line. 7. The four who were left out. Dr. Beatrice Golomb is Professor of Medicine at UC San Diego — a physics undergraduate degree, a PhD in biology, an MD. She directs a research group whose stated focus is the relationship between oxidative stress, mitochondrial function and health. That is the mechanism the episode spent its first half dismissing. Her published work includes the fluoroquinolone case series behind the FDA’s black box warning on an antibiotic class that ruptures tendons, where the accepted mechanism is oxidative stress and mitochondrial toxicity — the back half of my chain, already on a drug label. She is in the credits. She is not in the episode. She has told me she finds my theory biologically plausible, and that she has a recording of her interview. Dr. David Carpenter directed the Institute for Health and the Environment at the University at Albany for decades and is the most prominent academic voice arguing these fields cause harm. Childhood leukemia is the reason these fields carry a WHO classification at all, and Carpenter is the person you call if you want that case made by someone who has spent a career on it. He is in the credits. He is not in the episode. He has told me that when he was interviewed they could not have been less interested in what he had to say. Dr. Joel Moskowitz directs the Center for Family and Community Health at UC Berkeley’s School of Public Health. He told me directly that they interviewed him and that he thought it went well. He does not appear in the episode, and unlike Golomb and Carpenter, he does not even appear in the credits. Dr. Paul Héroux at McGill is the researcher whose work provides the foundation for the oxidative stress mechanism my theory rests on. I gave Rose his email address and phone number. He was never interviewed. They never even called him. 8. “He’s not a scientist.” The episode leans hard on the fact that I am not a credentialed scientist. Zukerman says it. Torre repeats it. “At all.” Having built a segment on that, they then left out the physicist-biologist-physician, the professor of public health, the director of a university environmental health institute, and the McGill researcher whose work the primary mechanism comes from. They spent the episode telling their audience I am not a scientist, and then kept four actual scientists who support the theory off because their argument does not survive otherwise. How they misrepresented me and my case 9. They played my words as a response to an interview I had never heard. Near the end of the hour, Zukerman says she went to me and told me the evidence was lacking. Then she plays me saying I am not wedded to it being an EMF, that I have staked my reputation on it needing more study, and that I am not certain of anything. That segment was placed immediately after Karipidis had finished taking the cherry-picked papers apart. It plays as a man folding under expert scrutiny. Commenters have used it against me since, but it is incorrect. Here is the sequence as it happened. I was interviewed. Karipidis was interviewed weeks later. I was never told what he said, or even who he was. I was never asked to respond to it. I did not know his name until the episode aired. That is not a simple editing decision. That is a quote from one interview, moved to follow a critique from a different interview it was not a response to, so that it would land as a concession. A friend of mine who has spent thirty years as a journalist read that sequence and called it sleazy. She is right. The full passage is reproduced in Appendix A, and it is worth reading. What airs is the preamble. Four paragraphs later I say “to directly answer your question” — and that answer, about what would change my mind if the team relocated, is not in the episode. Neither is the sentence two paragraphs on, where I say the EMF might turn out to be ten percent of the problem. I will say the underlying point again, though, because I meant it and I still do. I am not wedded to my theory that magnetic fields from the substation are contributing to the 49ers injuries. I could be wrong. What I am wedded to is the process of scientific inquiry, and the fact that we should be cautious around these exposures and we need more independently funded studies. 10. Three telling edits. They cut “I’m not a scientist” mid-sentence. What I said: “...and I am not certain of anything. I’m not a scientist. To me, I find the mechanisms compelling. I will go back to the fact that I got into this not because of the 49ers, but because of clients I was working with who suffer from EDS...” What aired: “...and that I am not certain of anything. I’m not.” The clip ends on the first two words of the sentence in which I say I am not a scientist, in an episode that spends considerable energy establishing that I am not a scientist. The full sequence is in Appendix A. They cut my own description of my work. Asked what I do, I said I run a wellness business, that I am focused on writing software to help people navigate environmental stressors, that environmental health is my focus, and that I also do independent journalism and research. What aired is the wellness business and the environmental health, with the software and the journalism removed from my own answer. The software engineering does come up later — narrated by them, as a hacker who grew up to write firmware — but my current work, in my own words, arrives as “wellness guy.” Thousands of commercial routers became home Wi-Fi. What I described: working at a wireless networking company surrounded by thousands of Wi-Fi routers, and a stress-induced health collapse afterward that working in that environment contributed to. What aired: Wi-Fi, the kind you have at home — reinforced by a clip of Christian McCaffrey talking about turning his router off at night. Three cuts, and every one of them makes me seem less credible. That is not a coincidence. 11. I gave them my own caveats and the test that would disprove me. In the first email I wrote that a well-designed chronic, ambient-level exposure study in tendon showing no collagen degradation, run over many months, would undercut my confidence in the theory. That is a specific, testable condition, stated in advance and in writing. There was a second interview, weeks later, which was not used in the episode, but in that I asked again for the falsification criterion to be included. What the episode presents instead is a man saying “we need more study,” which reads as a hedge, an open-ended request for the benefit of the doubt. It is the opposite of a hedge. Section 6 of my second email says, unprompted, that as far as I am aware there is not a single study showing EMF-driven oxidative stress degrading collagen in a human in vivo or in human tendon in a lab. I wrote that because it is true and because it is the first thing anyone should check. Under their standard it becomes the hinge of the entire first half, framed as something they had to surface without my cooperation. I had handed it to them five weeks earlier. And in the interview I said that my 25 to 50 milligauss readings were taken at knee level, and that these fields attenuate quickly, so by the time it reaches your head it is not that high anymore. That did not air either. The qualification arrives later, from Karipidis, as a correction. How you would actually study the injuries 12. They measured the wrong thing. The episode spends its final act on whether the 49ers are the most injured team in the NFL, finds no clean ranking, and lands on “injuries are random”. That is the wrong test. You would define the exposure — measured field levels at the facility — and the outcome narrowly: soft-tissue injuries, not a single MSK injury count that a broken finger and a ruptured Achilles both land in. Then you would compare the 49ers to themselves before and after the exposure changed, and compare that change against every other team over the same window. That controls for league-wide shifts in rules, turf and training load. It is a difference-in-differences design, and it is standard. I sent them that argument on July 28th, in writing, along with the fact that in eleven of the past twelve seasons the 49ers had finished top ten in Adjusted Games Lost. And by the episode’s own reporting, the 49ers are second in games lost to injury over the past decade, with FTN’s Aaron Schatz confirming that once you adjust for starters they come out second worst in the league — after having been one of the healthiest teams for years before that. A finding like that is where an investigation starts, not where it stops. 13. I did a lot of substation research for the episode that was never aired. I had reported that the substation next to the facility was expanded in 2014. That was wrong, and Rose Rimler and I sorted it out together. They gave me credit on air, which I appreciated, but framed it as a concession on my part to something they had found. In fact I had been investigating it myself, was uncertain before they asked, but was waiting for clarification from Silicon Valley Power. The uncertainty centered around a substation named “Esparanca” that was proposed right behind the facilities as part of the stadium construction, but now appears to never have been built. I spent days in Silicon Valley Power’s records, and did eventually reach Silicon Valley Power for confirmation and indentified the mistake myself. I also gave them highly detailed documents on what we do know about those facilities: new equipment installed between 2010 and 2014, and load growth across the system with an inflection around 2013–2014, with the Northern Receiving Station carrying the highest capacity in the system and sitting closest to the data center corridor. None of that is in the episode. I have a separate piece about it coming out soon. *I cut 2 seconds from the raw audio to remove personal information that had no connection to anything in the episode. Appendix A: the passage the clip was taken from This is the sequence from my first interview, in full. The episode uses one fragment of it. It’s tricky because my understanding is that there’s something like a 15-year half-life on collagen remodeling issues. They’re going to get a new crop of players. What I really need, though, is for the injuries to be broken down so we can see the soft tissue injuries. Right now, they’re categorized as MSK injuries, but let’s say we can actually identify them more specifically. Is that right? He was able to do that? Oh, cool. I wasn’t able to find that information. Interesting — I didn’t know that data existed. I tried so hard to get it, and I didn’t know it was available. Maybe you could connect me with that person. That would be amazing. I’m not wedded to it being an EMF, honestly. I’m not. I would say that, to a certain extent, I’ve staked my reputation on the fact that it needs more study. It’s important to look into it, and I am not certain of anything. I’m not a scientist. To me, I find the mechanisms compelling. I will go back to the fact that I got into this not because of the 49ers, but because of clients I was working with who suffer from EDS, Ehlers-Danlos Syndrome, a tendon hypermobility issue. This condition is documented to be partially caused by oxidative stress. I’ve worked with them to mitigate their EMF exposure and have seen people improve. I think it’s a bigger story. In a way, the 49ers represent an occupational cluster with specific exposure risks. If someone would conduct a study on this, I believe we could learn a lot. Perhaps we would discover that it’s like, okay, maybe it’s 10% of the problem. I don’t know the exact number, but I think either way, conducting the study would provide valuable insights. To directly answer your question, it’s challenging for me because it’s part of a bigger story. If the 49ers move and stop having injuries, I might conclude that it was related to the substation. However, if they move and still experience injuries, I would want to analyze the nature of those injuries. Are they primarily soft tissue injuries? I don’t think it’s necessarily a case closed, but the story might lose traction at that point regardless. Three things are worth noting. The aired fragment stops immediately before the sentence in which I say I am not a scientist — the cut described in item 10. It also stops four paragraphs before the words “to directly answer your question.” What the episode plays is the throat-clearing. The actual answer, about what would change my mind, never airs. And two paragraphs in, I say the EMF might turn out to be ten percent of the problem. That is the ranking the episode says I never gave. Appendix B: the full email, July 6th, 1:39 PM Hi Rose, You asked me to send you some studies a couple of weeks ago. I apologize for the delay. I have been incredibly busy. I also wanted to give you a chance to dig in yourself, and get your own perspective before I influenced you too much with mine. That said, I do want to make sure that the actual argument is abundantly clear, so here it is! One note before I begin, there are really two separate questions here: Does the substation cause the soft-tissue injuries? That was my specific claim, and what the podcast is about. Is the theory biologically sound? Can 50/60 Hz fields at these levels do anything biological below the safety limits? Question two is why people have been calling me a conspiracy theorist. The regulatory and advisory bodies (ICNIRP, etc) maintain that anything below their exposure limits is biologically inert, and that position is broadly accepted within the mainstream, but the actual science paints a different picture. To defend my theory I’ve had to defend a much larger claim: that the advisory bodies have the biology wrong. I can’t honestly answer question 1 without first addressing that. Here’s is a simplified outline of my theory, with links to studies: 1. Advisory body thresholds for biological effects The ELF magnetic-field limits (ICNIRP’s ~2,000 mG public / 10,000 mG occupational) exist to prevent acute effects from exposure. If a magnetic field is strong enough, it makes nerves fire and muscles contract. Muscles twitch. You can see faint flashes of light in your vision. People can even feel tingling or even a shock. That happens due to Faraday’s law, which states that a time-varying magnetic field induces an electric field inside the body via the creation of Eddy currents.The standards assume that those currents do nothing below the twitch threshold. They do not consider chronic effects at all. My argument is that they are biologically active and do have chronic effects. 2. There are multipe ELF-EMF mechanisms for inducing oxidative stress. This is basic biophysics. Below are the two primary mechanisms. Simplest first. Dr. Paul Héroux of McGill has the most intuitive explanation, which rests on Maxwell’s principle of superposition: because Maxwell’s equations are linear, two sets of electromagnetic waves sharing the same space simply add together. In the interview I pictured a pebble dropped into a pond, sending out clean ripples. Then a boat motors past at distance, sending larger waves, and where they meet the ripples, the two add together and the original pattern gets distorted. In our cells, the mitochondria run on continuous currents of electrons and protons that carry their own faint electromagnetic fields. An external field from a substation, by the principle of superposition, adds to those internal currents and shifts the pattern. The electron transport chain in the mitochondria leaks a fraction of its electrons by design as reactive oxygen species (ROS), which act as signalling molecules in a healthy cell. Distorting that field increases that electron leakage, creating oxidative stress. A tiny electromagnetic interference results in a large downstream effect. https://www.sciencedirect.com/science/article/pii/S2405844025006474 The more complex pathway is Dimitris Panagopoulos’s Ion Forced-Oscillation / Voltage-Gated Ion Channel (IFO-VGIC) mechanism. Weak, polarized, low-frequency fields force the ions (calcium, potassium, sodium) next to an ion channel’s voltage sensor to oscillate; because that force scales with the inverse cube of the distance involved, fields far below the stimulation threshold can still force the channel open, disrupting the cell’s ion balance and driving ROS overproduction (Nitric oxide and superoxide interact and produce peroxynitrite, a highly unstable cytotoxin that breaks down into free radicals). https://www.researchgate.net/publication/366088934 https://www.spandidos-publications.com/ijo/59/5/92 https://www.mdpi.com/1422-0067/22/18/10041 https://www.frontiersin.org/journals/public-health/articles/10.3389/fpubh.2025.1585441/full https://pmc.ncbi.nlm.nih.gov/articles/PMC3772193/ 3. Evidence of oxidative stress, in vivo, in humans from ELF-EMF There are many studies, and the strongest are occupational, which applies to the 49ers situation. 115 power-plant workers vs. 145 office controls. Serum malondialdehyde (MDA, the standard lipid-peroxidation marker), superoxide dismutase, and catalase were all significantly higher in the exposed group, and the markers rose with increasing field exposure. https://journals.sagepub.com/doi/abs/10.3233/WOR-203244 A follow-up where they reversed the oxidative stress in power plant workers. A double-blind randomized controlled trial: 91 power-plant workers given vitamin E, vitamin C, both, or placebo for 90 days. The antioxidant groups showed reduced lipid peroxidation and raised antioxidant capacity versus controls. https://pubmed.ncbi.nlm.nih.gov/32191586/ A spot-welder study: 46 welders occupationally exposed at 50 Hz, showed significantly altered red-blood-cell antioxidant enzyme activity and concluded ELF-MF “might act as an oxidative stressor… even at the recommended levels of exposure.” https://pubmed.ncbi.nlm.nih.gov/18504600/ A substation-specific study found oxidative stress and DNA damage https://pubmed.ncbi.nlm.nih.gov/24460415/ 4. Oxidative stress degrades collagen This half isn’t controversial at all. Oxidative stress activates the matrix metalloproteinases (MMPs) that break collagen down and suppresses its synthesis. Here are three example studies: Siwik et al. 2001: Oxidative stress raises MMPs and lowers collagen synthesis in cardiac fibroblasts. https://pubmed.ncbi.nlm.nih.gov/11121376/ Fisher et al. 2009: Collagen fragmentation drives oxidative stress and elevates MMP-1 in aged human skin. https://pmc.ncbi.nlm.nih.gov/articles/PMC2631323/ Varani et al. 2006: Decreased collagen production in oxidatively aged skin. https://pubmed.ncbi.nlm.nih.gov/16723701/ 5. What about the study showing improved collagen synthesis I’m glad you asked this question, and I’m bummed we didn’t get to it in the interview because it is a great question, and very important to understand. Superficially it may appear to be a refutation of my theory, but I would argue that it actually supports the underlying argument. That study used a short, high-intensity pulsed dose: therapeutic-PEMF, the same type of field used clinically to stimulate bone and tissue healing. The reason this works is because it triggers the very same biological pathways that can lead to oxidative stress. The exposure still stimulates ROS production, but done at a controlled dosage, for a limited duration it has a different effect. The cell reads the ROS as a warning signal and it upregulates its antioxidant defenses, and mounts a repair/proliferation response. The therapy is then stopped before the cell gets overwhelmed. That is essentially a hormetic response: a small dose of a stressor producing a beneficial adaptation. Two things follow: At the very least, this means the field is biologically active, which by itself undercuts the regulatory claim that these fields are inert below their thresholds. There is a wealth of literature on PEMF (pulsed EMF) bone regeneration and calcium channel signalling (which is the second mechanims in section one). Here is one. https://www.nature.com/articles/srep13856 At best, it leads us straight to my actual concern, which is that under chronic, chaotic and unregulated exposure, the cell’s antioxidant capacity gets overwhelmed, resulting in oxidative stress. There are plentiful examples of things that are beneficial at controlled doses, but harmful at uncontrolled doses. Excecise is one obvious, uncontroversial example. Botox is perhaps a more interesting example. 6. What about a study that shows EMF causing collagen degradation in humans? As far as I am aware there is not a single study showing EMF-driven oxidative stress degrading collagen in a human, in vivo, or in human tendon in a lab. There are studies involving isolated fibroblasts though, which secrete collagen. The most relevant one showed that human fetal scleral fibroblasts exposed to 50 Hz ELF-EMF showed a significant decrease in collagen synthesis and that MMP-2 expression was upregulated, which is the exact mechanism I described in section 2. https://pmc.ncbi.nlm.nih.gov/articles/PMC3626379/ That’s it! Thanks again for the interview. Best, Peter Anthony Cowan Environmental Health · Wellness Tech · Researcher & Journalist Publisher & Editor, Living Energy Bio: petercowan.comSocial: X · Instagram · TikTokApp: sunlightis.lifePhone: [redacted]
NFL Week 2 Sunday Night Football—Best Player Props
Find out which running back should be busy and eclipse his player prop for rushing yards, and which receiver has a compelling case to go over his receiving yards prop.
MD-based R&R Contracting expands woman-owned business
It’s been a busy — and banner — year for Maryland-based R&R Contracting Utilities Inc., which received WBENC certification.
Andoni Iraola favourite to make Liverpool audition this weekend
Liverpool enjoyed another busy transfer window this summer, adding several top talents to Andoni Iraola's squad.The arrivals of Jeremy Jacquet, Victor Munoz and Bradley Barcola were instant boosts to ...
Versant's US$530m Full Swing buy in a busy summer of sports tech deals
Versant's US$530m Full Swing purchase, SI's Magnifi acquisition and TSC's EventAIQ launch: what SportsPro's summer technology coverage means for sports.
Valor Mortis is only $40 because its developer knows you'll be choosing from a lot of big games over this "stacked" autumn
Valor Mortis, previously delayed to avoid a busy September, has today revealed it won't be as expensive as many of the games releasing around the same time.
Report: Media Molecule New Game Set to Be Revealed in 2027, First Info Leaks
Four months ago, we reported that LittleBigPlanet developer Media Molecule was busy toiling away on a new IP with "open-world content." For those wondering what happened to the studio, they…
As election approaches it’s business as usual for JaCo Clerk - KOBI-TV NBC5 / KOTI-TV NBC2
EDIT: Late Monday afternoon, the Supreme Court ruled President Trump cannot enforce new mail-in ballot regulations before the November General Election. MEDFORD, Ore.– Only seven weeks from the November 3rd General Election, Jackson County election workers are treating it like any other election. That means they are busy preparing things like the Voters Pamphlet, which was […]
Minnesota Twins Congratulate Pablo Lopez for Award Nomination
Minnesota Twins right-hander Pablo Lopez has been busy off the field as he continues to recover.
Bucks Have Multiple Legitimate NBA Award Candidates This Season
The Bucks could have a busy award season on their hands.
Xbox CEO Asha Sharma May Have Personally Responded to Your Customer Support Ticket
New-ish Xbox CEO Asha Sharma has had a busy first six months on the job, including killing the divisive "This is Xbox" marketing campaign, slashing Xbox Game Pass Ultimate's subscription price, and unfortunately also overseeing mass layoffs and development studio spin-outs. But as Sharma has gotten settled in her job, she's also been spending time understanding Xbox's products and customers in another way: by fielding customer support tickets.
Midwest Access: Mental Health Monday - The Hidden Cost of Constant Busyness
It may be time to clear your schedule and commit some time to relaxing. In today's edition of Mental Health Monday, we are learning the hidden cost of constant busyness.
WATCH: Midwestern State Saturday soccer double header
WICHITA FALLS – Stang Park was busy Saturday, both Midwestern State’s 6th-ranked men’s soccer team and women’s team took to the pitch for home games. The women’s team opened Lone Star Conference play with a commanding 8-0 win over Eastern New Mexico, while the men won a thrilling 2-1 match against Cal Poly Pomona.
ON THE MARK: Live music showcased during Frankfort Harborfest
When the Frankfort Harborfest gets underway next weekend, Justin Smithson expects to be one busy dude.