SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " rhea " 379 found 🔀 AI-powered Shuffle
Independent Talent Group Appoints Dan Chard To spearhead Sport And Entertainment Commercial Expansion
London, October 22, 2026 - Independent Talent Group today announces the appointment of Dan Chard in the newly created role of
Former NC GOP Senate candidate sues Wake schools over access to public records
Wake says it would take 703 hours of staff time at a cost of $15,395 to process the public records request from Scott Lassiter.
A record number of women are running for state legislatures this year
A record number of women are running for state legislative seats this November, more than two-thirds of whom are Democrats. Across the 46 states with legislative seats on the ballot, a total of 3,824 women are running — up from 2022’s previous record of 3,621 women candidates, according to the Center for American Women and Politics at Rutgers University.
Trump’s billion-dollar grant cuts jeopardize Tulane public health research
President Donald Trump has terminated billions in federal science and research grants since 2025. As a result, global health research and job stability at Tulane University’s Celia Scott Weatherhead School of Public Health and Tropical Medicine are in jeopardy. Since 2025, the Trump administration has frozen or terminated $177 billion in grants on health equity,...
ARMOR HEALTH CONTINUES TO EXPAND ITS NATIONAL FOOTPRINT - ADDS TWO REGIONAL LEADERS TO COMPLEMENT GROWTH
/PRNewswire/ -- Armor Health (Armorhealthcare.com), a leading provider of integrated correctional healthcare, continues to expand its footprint nationwide,...
How overhead projectors took over your classroom
On Version History: Class is in session.
Scientists Found Dozens of Hammerhead Sharks Hanging Out Near Swimmers. Here’s Why.
Drone surveys spotted groups of up to 100 young hammerheads near Australian swimming beaches, where shark control measures pose a threat.
Qualcomm denies rumors about Snapdragon 8 Elite Extreme Gen 6 overheating
Don't panic just yet. Yesterday, a Korean news outlet shared some concerning news about the upcoming Samsung Galaxy S27 Ultra. According to the report,...
Qualcomm says rumors about Snapdragon 8 Elite Extreme Gen 6 overheating are ‘inaccurate’
Qualcomm says that rumors of thermal issues and overheating problems on Snapdragon 8 Elite Extreme Gen 6 are "inaccurate."
Galaxy S27 reportedly skips Snapdragon 8 Elite Extreme Gen 6 due to overheating
According to a new report, Samsung’s Galaxy S27 series might not use the latest Snapdragon chipset due to overheating problems....
'Father Of PlayStation' Ken Kutaragi Blames A 'Mentality Issue' For The Backlash To Killing Discs
The Sony veteran doesn't sound very sentimental about the end of physical media on the platform he spearheaded
Albania: Protesting students demand political change and resignation of longtime Prime Minister Edi Rama
Empty lecture halls, burning buildings and demands for change: Albanian students are spearheading a protest movement that has become the biggest challenge to Prime Minister Edi Rama in years.
What doctors want patients to know about food poisoning
Food poisoning can cause vomiting, diarrhea and dehydration. Learn how to spot warning signs, recover safely, prevent illness and when to call your doctor.
Ford Racing Parts thrives selling crate engines to gearheads
Collectors replace or upgrade engines in everything from Ford Mustangs, Broncos, F-150s, Fairlanes and Galaxies to Chevy Camaros and Chevelles.
LA County students spearhead project to recycle sports balls
Another Bounce, a student-led initiative, was created in response to tennis ball and pickleball waste.
SPECIAL REPORT: Tough Business
A string of vacant restaurant buildings shows that many restaurants in the region are struggling — and several are closing By Stefan Yablonski [caption id=attachment_11132 align=alignright width=401] Smokey Bones Bar & Fire Grill on Route 31 in Clay closed its doors in April. It had been in operation since at least 2008.[/caption] By their nature, most restaurants have a limited life. An astonishing 60% go out of business within three years of opening, largely due to fundamental flaws in the planning of the operation. But even restaurants that experience years of success almost always face eventual closure. The restaurant business is very hard and because of both personal factors and external factors beyond anyone’s control, restaurants don’t last forever. For many restaurants, age is a big factor, according to Kenneth Walsleben, professor of practice, entrepreneurship and emerging enterprises at Syracuse University. “The owners have been at it for 20 or 25 years, if not longer, they want some time to themselves,” he said. Such was the case for Jocko’s Famous Ritz Diner in Oswego. Jocko Reitz bought the building in the late 1970s from Robert Shapiro. However, when he stepped away from the business, it eventually closed. [caption id=attachment_11142 align=alignright width=402] For nearly 80 years, Vona’s Restaurant passed through three generations of family in Oswego. It closed its doors on Dec. 31, 2025.[/caption] For nearly 80 years, Vona’s passed through three generations of family in Oswego. Vona’s Restaurant officially closed its doors on Dec. 31, 2025, when no family member wanted to take over. It is on the market. The Ruby Tuesday in Oswego operated for about two decades before permanently closing in April 2026. The restaurant faced multiple temporary health department closures in 2024 and 2025 due to persistent fruit fly and foundation pest issues. Management posted a final closure notice on the doors in mid-April 2026 and the building was put up for sale. The same pattern has been happening in Onondaga County. The big building once used by Smokey Bones Bar & Fire Grill on Route 31 in Clay remains empty, more than six months after the restaurant closed its doors in April. It had been in operation since at least 2008. [caption id=attachment_11130 align=alignright width=401] Ruby Tuesday in Oswego operated for about two decades before permanently closing in April 2026.[/caption] Just down the road from Smokey Bones, the popular Outback Steakhouse closed in August 2024. Another restaurant took its place, La Cocina Mexican Restaurant, but it closed shortly after. The building sits empty. Other very popular restaurants in the northern suburbs of Syracuse have recently closed. Among them, Fireside by the River in Baldwinsville and Primo Nestico’s Bistro Bar in North Syracuse. “I haven’t really paid attention to the Syracuse area. There has always been some turnover, but there probably has never been a tougher time to be a restauranter than now. It’s just brutal,” Walsleben said. In the first year, roughly 20% to 25% of restaurants close or change hands, according to the National Restaurant Association. [caption id=attachment_11122 align=alignright width=401] Outback Steakhouse closed in August 2024. Another restaurant took its place, La Cocina Mexican Restaurant, but it closed shortly after. The building sits empty.[/caption] “Depending on what statistics you look at, you’ll find that any business has a high mortality rate in the first year. That is just the nature of entrepreneurship,” Walsleben said. “There are certain ones that are getting hit hard while others are more fruitful. “And when you look at the restaurant industry you have to factor in labor which is a large part — typically a third of your expenses — and those costs are going up. And there is always turnover which means investing money to train people. Then you’ve got food costs, which is also a third of the typical restaurant budget. Since the pandemic labor has gone up 41%, food costs have gone up 35%. That’s a big tight squeeze righty there. That’s two-thirds of your budget that has gone up 35% to 40% in the last few years. And then the only way you can make that work is to raise the prices.” The National Restaurant Association reports menu prices are up 36% since February of 2020. In a survey released by the association, more than eight in 10 restaurant owners reported that their food, beverage and labor costs are now higher than before the pandemic. You have to deal with the reality of are the customers willing to pay for that? Walsleben added. Restaurants historically have very thin margins; their profit margin is about 5%. “You have a third that goes into food, a third that goes into labor and about 28%, 29% that goes into everything else — overhead, insurance etc. So that brings you down to your 5% leftover,” he said. “Everything is going up. Customer expectations are going up and people aren’t going to spend that much more. So, you have a tight squeeze here,” Walsleben continued. “Restaurants who use delivery apps, they pay a fee to those guys. Those guys don’t work for free. So, you can kind of see where the squeeze comes from.” Stuck in the middle There are pockets of opportunity; the two extremes of the market can make a profit. But the middle gets squeezed out. “If you are a low-end fast-food kind of place, there is room for that. People have changed their budgets. They are still going out, but they are not spending more,” according to Walsleben. “The high end remains positive. If you have a restaurant that brings a specific experience … a great food product or you are catering to high end customers who aren’t so budget conscious, those patrons are going to expect a high-end experience. They expect excellent food every time. They are expecting excellent service. If you can meet those expectations there is room for you at the top. It’s just the guys in the middle are getting the squeeze from both ends. Tough competition, customer expectations, costs are up. Menu items, you can’t raise the prices as much as you need to. That is why you are seeing a lot of restaurants baling out.” The ones that can adapt quickly are the ones who are doing OK. “Success is heavily dependent on the strength of a restaurant’s concept development and the planning of its execution. Eventually things aren’t always new. Things change. So, if you are in the restaurant business you have got to change your menu — keep things new, fresh and update your meals. It is very fickle industry. One year carbs are out, the next year berries are out. Everybody’s diet changes — constantly chasing the latest phase. You have got to adjust your menu and move with those modifications. If you have a static menu that you have used the last couple years that hasn’t changed except for the pricing, you’ve got a problem,” he said. A lot of times these buildings are singular purpose, he added. “You have a commercially viable kitchen and you got a seating area. There is not a lot of other businesses that cater to that type of a layout. So, it’s pretty common to see another restaurant slide in,” he said. One of the things a banker learns early on is you don’t lend money to restaurants … because they fail so quickly. It is very hard to predict who the winners will be. So, if you are a restaurant in addition to all the other challenges, it is very difficult to get loans, according to Walsleben. “You might work really well in the kitchen. But that doesn’t mean you are a great businessperson,” he said. “Restaurants can fail because the owner didn’t know how to manage things properly. There are a lot of challenges. “There is opportunity at the high end and the low end. But in the middle, that’s the death valley. There are just so many things working against you. You really need to have something that will pull people in and continue to pull people in because you to constantly have to change. Think about a theme and a product that is unique to the area people don’t travel that far these days you have to be able to deliver it in an innovative fashion and keep updating to keep people coming in the door.” Out of Business? How Fast? Do nine out of 10 restaurants fail in their first year, as commonly claimed? No. Survival analysis of 1.9 million longitudinal microdata for 81,000 full-service restaurants in a 20-year U.S. Bureau of Labor Statistics non public census of business establishments in the western US shows that only 17% of independently owned full-service restaurant startups failed in their first year, compared with 19% for all other service-providing startups, according to ResearchGate. The median lifespan of restaurants is about 4.5 years, slightly longer than that of other service businesses (4.25 years). However, the median lifespan of a restaurant startup with 5 or fewer employees is 3.75 years, slightly shorter than that of other service businesses of the same startup size (4.0 years). What Makes a Restaurant Successful? Opening and maintaining a successful restaurant is not as easy as creating a great menu and serving excellent food. It takes more than that, according to local restaurant owners who have been in business for decades in the region. They all agree that there are some guidelines to running a successful restaurant. • Quality food: Successful restaurants know exactly what they serve and who they serve it to. Delivering the same great taste every single time builds loyal customers. • Smooth operations: Friendly greetings and attentive staff make guests feel welcome from the moment they walk in. Hiring staff for personality and training for skill ensures reliable, caring service. • Smart marketing: Exceptional food and experiences naturally get people talking and sharing online. Word of mouth can help entice customers. Consistent social media and targeted advertising brings in new and repeat guests also. The menu is what keeps patrons coming back to Mimi’s Diner in Fulton, located at 201 N. Second St. “We locally source our produce and our meats. Our chicken and biscuits is a popular, popular special,” said Richard Tagliareni, the third-generation owner and general manager. “It’s all homemade. We have consistently served quality food.” His grandfather started the business more than 55 years ago. Mimi’s is engrained in the community. They cater to the community and are very involved in everything from the schools to local events. The first Mimi’s Drive-In opened in Mexico. Then a second in Oswego and then Fulton. Fulton’s Mimi’s is the only one left. “The last couple of weeks have been kind of slower than normal. October is usually a busier month for us People will start coming back around again. Also, the price of gas is affecting some things,” Tagliareni added. “We try to keep our prices in line. You go out to eat, you’re going to spend about a hundred bucks or so for two people for dinner. You come here to Mimi’s you are probably for two people for dinner it’s between $50 and $60. We are trying to keep our prices in line. We did have to increase our prices a little bit but things are looking OK.” For the Press Box, 29 E. First St., Oswego, it’s also about great food and a family atmosphere. “Our sports bar and restaurant was established in 1984,” said Alison Canale Scanlon, manager. “I think putting the time into everything makes a big difference and treating people like family when they walk into your restaurant. That’s how we have always operated since 1984.” “It’s the family oriented aspect,” she added. “Consistency, quality and presentation of our food — that’s the secret to a successful restaurant. We try to be very consistent with it. We treat people like family when they come in; because we know how we want to be treated when we go to a restaurant. We treat people the same or better.”
Are Bank Lobbies Still Relevant?
Local banking leaders say technology is changing the way customers use their banks — and their lobbies By Deborah Jeanne Post [caption id=attachment_11109 align=alignright width=300] Steve Gorczynski is M&T Bank Central New York regional president.[/caption] When was the last time you entered the lobby of your bank? If it’s been a while, you’re part of a trend of eschewing the lobby in favor of ATMs, drive-thrus, online banking and remote deposit. A 2025 study performed by the American Bankers Association revealed that only 9% of consumers use bank branches as their preferred way to do banking and 76% prefer mobile banking. The trend away from the lobby reflects consumer behavior in other areas of doing business, including online shopping instead of perusing the mall, ordering fast food at a kiosk, not at the counter and selecting curbside pick-up rather than walking into the restaurant. Consumers want convenience and going in the lobby adds another layer to the task. It also places consumers face to face with one or more representatives of the business, something less favorable to people feeling burned out from interpersonal interactions. Nixing or at least minimizing the size of the lobby isn’t necessarily negative for banks. Fewer people passing through their doors reduces overhead for building maintenance, staffing and furnishing. Greater reliance on virtual banking can mean closing brick and mortar locations and hiring fewer staffers to cover roles like teller and lending officer. “Our focus is on meeting customers where they are and giving them flexibility in how they bank,” said Steve Gorczynski, M&T Bank Central New York regional president. “While many everyday transactions can be supported digitally and through ATMs, branches remain important for more complex financial needs, offering face-to-face guidance and a more personal banking experience.” Talking with a commercial lender or working on a home mortgage are two examples where meeting face-to-face is more desirable for many people. They can receive immediate feedback to questions and can possibly reach their goals more quickly. But there’s little need to have a large seating area, long counters and numerous tellers for routine banking that’s quicker to handle virtually. Online banking can also help people on the go more readily complete banking tasks such as depositing checks, transferring funds among accounts and checking balances. [caption id=attachment_11135 align=alignright width=300] Tina M. Stephens is the vice president branch administration for Fulton Savings Bank.[/caption] “The traditional bank lobby is certainly being evaluated by most institutions today, as the typical large, open and cavernous spaces do not necessarily meet the needs of today’s customers,” said Tina M. Stephens, vice president branch administration for Fulton Savings Bank. “Traditional lobbies often bisect traditional teller stations and customer service areas, which adds confusion, especially for the demographic who routinely use online banking and only access the lobby for customer service needs.” Despite the rollback in physical locations across the industry, Fulton Savings Bank began modernizing its six branch offices in Oswego and Onondaga counties about three years ago and have finished four offices so far in Baldwinsville, Fulton, Constantia, and Phoenix. “We made the decision to build a new branch across the street from our current office in Brewerton which will be completed by the end of 2026, and we will begin the retrofit of our Central Square office in early 2027,” Stephens said. “Our efforts specifically address where we think customers will be in the next three to five years and have greater flexibility to make changes out into the future.” The bank may be onto something, as numerous reports state that screen-weary Gen Z young adults crave more in-person interactions than virtual ones. If the pendulum continues to swing in that direction, it’s hard to see all physical bank areas disappear, even if they change somewhat. Fulton Savings Bank has also consolidated its teller and customer service representative areas to larger “universal banker” areas, where the bank representative can address all customer retail needs. A one-stop-shop experience appeals to busy banking customers who want to perform a few different banking tasks in one visit. Stephens also said that Fulton Savings Bank made additional technology and security enhancements and created flex spaces to accommodate bank meetings throughout the two-county branch footprint. At Solvay Bank, Elizabeth Lavier, vice president marketing and communications manager, lauded digital and online services as convenient and flexible for managing finances; however, “technology is not meant to replace what matters most: the relationships behind every account that have always been at the heart of community banking,” she said. “Even in today’s digital-first world, people of all ages still value the opportunity to sit down with a trusted banker for personalized guidance. We understand that some of life’s biggest moments call for more than a screen.” Lavier views digital banking as another way for the organization to serve customers rather than a replacement for branches, tellers and lenders, which tend to serve customers better for transactions like buying a first car, purchasing a home, saving for a child’s education, or planning for retirement. “Those conversations, built on understanding, experience and personal guidance, are what community banking is all about,” Lavier said. “At the end of the day, banking is about more than transactions. It’s about helping our customers achieve their goals and being there for them every step of the way. By combining the convenience of digital banking with the care, commitment, and personal service of a local community bank, Solvay Bank offers customers the best of both worlds.” Are Paper Checks Destined to Disappear? With the ubiquity of debit cards, online payments, virtual checks and peer-to-peer payment platforms like Venmo, Zelle and PayPal, will paper checks become passe? “In my view, paper checks are unlikely to disappear in the near future,” said Tina M. Stephens, vice president branch administration for Fulton Savings Bank. “They continue to serve a practical purpose by providing a clear paper trail and tangible proof of payment.” According to the American Banker, a leading trade publication that covers the banking and financial industry, in 2024, checks accounted for 65% of all payment fraud losses. Paper checks should be phased out, according to the publication. “The phrase, ‘The check’s in the mail’ probably sounds strange to younger people because the era of paper checks is rapidly drawing to a close. Put bluntly, checks are an expensive, insecure legacy that is a drag on the U.S. economy. Rather than wait for them to vanish slowly, the pragmatic choice is to strategically accelerate the transition to paperless payments.”
🗞️ Barça blitz, Atlético drama, Italian collapse: Wednesday's front pages
The latest round of Champions League action has unleashed a storm of emotions across the continent’s leading front pages. From Lamine Yamal’s masterclass spearheading Barcelona to Atlético’s em...
New entertainment district to be discussed
It is called The Boulevard and is spearheaded by Reno Pro Soccer.
Beyond Buzzwords: How Sutter Leaders Create Healthcare’s Blueprint
By Matthew Murphy, Vitals contributor What does meaningful transformation look like inside a healthcare system, and what lessons can it offer the rest of the industry? In a series of recent podcast conversations, Sutter Health leaders shared how they’re tackling some of healthcare’s biggest challenges, turning new ideas into action and creating a blueprint for […]
More than 82K rechargeable hand warmers recalled over fire risk
More than 82,000 rechargeable hand warmers combined from HotHands and Gobi Heat face a recall due to overheating that poses fire and burn hazards.
Is local produce safer? After Cyclospora outbreak, Ann Arbor business owners say yes
Ann Arbor residents, along with many other Midwesterners, found themselves rethinking where their produce comes from amid a diarrheal parasite outbreak this past summer.
Is Armando 'Hormiga' Gonzalez Playing Today for Olympiacos vs. Panathinaikos?
With Ayoub El Kaabi sidelined, Armando 'La Hormiga' Gonzalez looks to seize his moment as the clinical spearhead in Olympiacos' high-stakes Eternal Enemies showdown against Panathinaikos.
Not Your Momma’s Mammogram. How AI Helps Modernize Screening.
For decades, mammography has been one of healthcare’s most powerful tools for detecting breast cancer early. And today, artificial intelligence is helping make that screening even stronger. California’s Sutter Health has long been recognized as a leader in quality care and digital health innovations. The not-for-profit health system has embraced AI-enhanced mammography to support radiologists, […]
Silent Hill Creator Keiichiro Toyama’s Bokeh Game Studios Next Project First Info Unearthed
When it comes to horror franchises, Silent Hill is up there as one of the most known and respected. That's why when its creator, Keiichiro Toyama, left Konami to start…
In brief: 'Stick' season 2 trailer and more
Bill Murray stars in the official trailer for A Course Called Ireland. The six-part documentary series premieres on Paramount+ on Oct. 25. The show follows Murray and his friends as they travel across the island to explore Northern Ireland and the Republic of Ireland's best fairways ...The Die Hard films are getting a brand-new home media release. All five of the movies will be released on physical media in 4K Ultra HD on Dec. 1. Bruce Willis stars as John McClane in all of the Die Hard films. The original movie finds the New York City policeman taking on terrorists after he flies to Los Angeles to be with his estranged wife and two children on Christmas ... TNCMS.AdManager.render({region: 'fixed-big-ad-top-asset', slot: 1, fold: "above"}); The trailer for Stick season 2 is here. Owen Wilson stars as the talented golfer who strives for second chance in the sophomore season. Peter Dager, Timothy Olyphant, Rhea Seehorn, Marc Maron, John Higgins and Billy Zane also make up the cast of the new season. The Apple TV series premieres its first two episodes on Nov. 4. A new episode drops weekly every Wednesday that follows until the season finale airs on Dec. 30 ...Copyright © 2026, ABC Audio. All rights reserved. Thank you for reading kmaland.comAt KMA, we attempt to be accurate in our reporting. If you see a typo or mistake in a story, please contact us by emailing kmaradio@kmaland.com.
Riverhead Town Board Roundup: RFP to bidders authorized for former LI Science Center building as condemnation proceedings continue
The Riverhead Town Board is issuing a request for proposals, or RFP, to interested parties who want to transform the empty 111 East Main St. building into a “destination attraction.” The 5-0 vote on Tuesday means qualified developers, attraction operators, entertainment companies, destination retailers, hospitality groups, and public-private partnership teams can now submit their bids...
Ace Combat 8 players in Japan are affectionately headcanoning its ace pilot protagonist as a helpless "airhead" outside the cockpit, thanks to clumsy story moments and awkward QTEs
In ACE COMBAT 8: WINGS OF THEVE, players take on the role of silent protagonist Rex, an ace pilot who racks up impressive achievements in aerial combat. However, a popular headcanon has recently been making the rounds among Japanese Ace Combat players, proposing (affectionately) that outside of the cockpit, Rex is actually a complete airhead. The idea was fueled by how the game’s interactive scenes work as well as certain moments in the story, with Rex gradually becoming the fandom’s beloved anemic baby. Note that this article discusses some details of Ace Combat 8’s main story. Ace Combat 8 is set in the franchise’s shared fictional world of Strangereal. In […]
Rothwell pitches business approach to town government in supervisor run
Councilman Kenneth Rothwell is running for Riverhead Town Supervisor this November after serving on the town board since 2022.
Riverhead seeks developers for ‘destination attraction’ at former science center site
Riverhead Town is issuing a request for proposals for the redevelopment and operation of ‘a destination attraction’ at 111 East Main Street on the west side of the town square.
Ceola’s Blood Cancer Story
After a routine appointment revealed blood cancer, Ceola Karchner is moving forward one step at a time. Read Geisinger patient stories.
Kelly’s Breast Cancer Story
Her breast cancer diagnosis came without symptoms after a routine mammogram. But throughout treatment, Kelly Titus remained strong for her family, refusing to let cancer call the shots.
New science program off to a successful start at Spring City library
SPRING CITY — Audrey Pack Memorial Library debuted a new science program for homeschool students last month.
The ‘War Games’ problem: Computer science has long understood what it takes to keep AI under control
AI agents don’t go rogue. That’s something only humans do. Nevertheless, a New York Times article – representative of much news coverage of AI – described an OpenAI hacking as “A.I. bots going rogue and independently spearheading a cyberattack.” Name-brand artificial intelligence agents have been on a hacking spree in…
NWA C-Suite: Brad Sikorski
In addition to promoting the organization’s mission and advocating for affordable housing solutions in Northwest Arkansas, Sikorski has spearheaded the construction of McAuley Place in Bentonville. The project will provide...
NWA C-Suite: Brad Sikorski
In addition to promoting the organization’s mission and advocating for affordable housing solutions in Northwest Arkansas, Sikorski has spearheaded the construction of McAuley Place in Bentonville. The project will provide...
ACSH in the Media: Yahoo News, RealClear, Science & Culture, and More
From cancer and cannabis to perverse research incentives, we’ve been busy confronting nonsense. Here’s a roundup of recent media appearances and pickups featuring ACSH experts across the web, including coverage in Yahoo News, RealClearHealth, RealClearScience, and Science and Culture.
Trump announces members of AI task force
The president appointed his director of national intelligence to spearhead the task force, amid growing concern about AI risks.
On Fort Worth’s streets, a UNT Health professor remembers why he chose medicine
Through street medicine, Christopher Rheams cares for people without homes and teaches students to see the person before the patient.
Connecting Medical Training to the Future of Care
Physician training doesn’t stop at the bedside. Residents also grow by teaching, leading and mentoring others. Sutter Health brought that approach to this year’s Latino Medical Student Association National Conference, where it served as a diamond-level sponsor. The event brought together medical students, pre-med students, residents and health care leaders from across the country. Now […]
Riverhead asks residents, businesses to report nor’easter damage
Riverhead Town officials are asking residents and business owners to self-report damage from the Sept. 26-27 nor’easter using a New York State online form to help document impacts and support…
Global Health & WASH: October 2026 Funding Opportunities (26 new opportunities)
41 opportunities on the Global Health & WASH page this cycle, 26 of them new. The health money on this page is mostly research money, and much of it is aimed at people early in their careers. Funder after funder, from the TANGO2 Research Foundation’s Research Pathways grants to the South African Medical Research Council’s Early Investigators Programme to the National Ataxia Foundation and Alex’s Lemonade Stand Foundation, is funding early-career investigators and the institutions that host them, with a clear tilt toward researchers based in or from the Global South, from AMBSO in Uganda to Kenya’s CONNECT-VAX network to Ersilia’s AI Incubator for African drug discovery. The money is organized by disease as much as by need: narrow foundations, the Parkinson’s Foundation, NTAP for neurofibromatosis, the RUNX1 Research Program for an inherited blood disorder, each run their own grant, so the question for an applicant is less which health problem you work on than which foundation owns your disease. The largest European cheques go to consortia only, with the European Innovation Council putting up to EUR €4 million behind a single healthy-ageing project and UNITE up to EUR €1 million behind each cross-border digital health team. Water sits apart, almost entirely in applied utility research: the Water Research Foundation’s cluster of USD $250,000 to $500,000 projects, each built around a utility problem from sewer laterals to reuse treatment. And the biggest single pot is public: HRSA is renewing community health center service areas with awards of up to USD $10 million each. This post is for paid subscribers. This helps support the time and effort it takes to curate and organize these opportunities. Subscribe To keep this accessible to everyone who needs it, we’re happy to offer pay what you can rates. You can find more details here. Open Opportunities 2027 Building the Field of Health Advocacy Grant, Georgia Health Initiative. *New!* *Closing soon!* Georgia Health Initiative, a nonprofit private foundation focused on health equity, is opening its 2027 Building the Field of Health Advocacy Grant to strengthen the organizations that push for healthier systems across the state. The Initiative treats advocacy as infrastructure, backing one-year projects that range from urgent responses to shifting federal policy to longer arc campaigns on housing, behavioral health, care access, and food security. It wants coalitions that elevate community voice, apply an equity lens, and arrive ready to deploy concrete strategies, and it deliberately seeks variety in issues, communities, and organizational size. The optional webinar and required lobbying training signal a funder investing in a durable field, not one grant cycle. The strongest fits are Georgia nonprofits and public agencies ready to turn advocacy readiness into systems change. Geographies: United States. Who can apply: Tax-exempt 501(c)(3) public charities, state or local government agencies, or coalitions/collaboratives using a 501(c)(3) fiscal sponsor, that work in Georgia on behalf of Georgians and align with the mission, vision, and values of Georgia Health Initiative. Only one application per organization, though an organization may be listed as a partner or subcontractor on multiple applications. Funding amount: Organizations can apply for up to USD $80,000 per project; the Initiative anticipates investing a total of USD $1.36 million. Targeted Sectors / SDGs: Governance, Policy & Advocacy · SDG3; SDG10. Deadline: October 2, 2026. Learn more and apply here. TDD Research Pathways Grant, TANGO2 Research Foundation. *New!* *Closing soon!* The TANGO2 Research Foundation, working with a founding gift from Tango2UK, is opening its TDD Research Pathways Grant to fund early-career investigators anywhere in the world who study TANGO2 Deficiency Disorder. The foundation is using this money to seed pilot work and to build a research community around a rare disorder that few labs currently study. It wants to back emerging scientists, clinicians, and trainees who will stay with this field, not one-off projects, which is why it requires a committed mentor and real institutional support and asks each applicant for a plan for future contributions. The design rewards promise and persistence over track record. The strongest fits are students, residents, postdoctoral fellows, and new investigators ready to commit to TANGO2 research. Geographies: Global. Who can apply: Early-career investigators worldwide, including undergraduate, graduate, and medical trainees, postdoctoral fellows, residents, and clinical or research fellows. Early-career investigators must hold a PhD, MD, or equivalent doctoral degree and be within 10 years of that degree or within 5 years of initiating rare disease research, engaged in postdoctoral research at an academic institution, teaching hospital, or nonprofit research institute. Currently enrolled trainees and transitional PhD candidates beginning a postdoctoral appointment at a nonprofit institution by July 1, 2026 are also eligible. All applicants must identify a qualified mentor with relevant TDD or rare disease research experience and demonstrate institutional support. Funding amount: Up to USD $15,000. Targeted Sectors / SDGs: Innovation, Science & Technology. Deadline: October 2, 2026. Learn more and apply here. Call for Expression of Interest (EOI): AMBSO Impact Research Initiative, Africa Medical and Behavioral Sciences Organization (AMBSO). *Closing soon!* The Africa Medical and Behavioral Sciences Organization is inviting expressions of interest for its Impact Research Initiative, which funds early-stage pilot studies and proof of concept work on priority health challenges. AMBSO is a Ugandan research organization backing bold ideas that can grow into larger studies, and its tracks span antimicrobial resistance, epidemic preparedness, artificial intelligence for diagnostics, HIV prevention, climate and health, cancer, maternal and child health, and non-communicable diseases. The small award size and direct-cost-only rule point to a funder that wants evidence rather than overhead, and that favors projects able to attract follow-on money or use AMBSO’s own research infrastructure. Eligibility runs worldwide, welcoming researchers and institutions inside and outside Africa. The strongest fits are researchers with a feasible pilot that generates policy-ready evidence. Geographies: Global. Who can apply: Open worldwide to researchers, academic institutions, and research organizations whose work aligns with generating high-impact health evidence. Independent researchers are eligible if affiliated with an academic or research institution. Doctoral students are encouraged to apply as part of a research team led by a faculty Principal Investigator. Community-based organizations and other eligible entities may apply. Projects may be implemented inside or outside Uganda. Funding amount: Up to USD $10,000 per project, with no minimum funding threshold. Targeted Sectors / SDGs: SDG3. Deadline: October 2, 2026. Learn more and apply here. Entrepreneurs for Resilience 2027 (E4R27), Swiss Re Foundation. *Closing soon!* Swiss Re Foundation is opening the tenth edition of Entrepreneurs for Resilience, which backs healthcare social enterprises expanding affordable, quality primary care for low-income communities across low- and middle-income countries. The Foundation is using catalytic, blended funding plus multi-year advisory to take risk out of scaling, helping proven models reach more people sustainably rather than stay stuck at pilot size. It looks to back brick-and-click enterprises that pair physical care with digital tools and build affordability through savings, payments, or microinsurance, ideally integrated with public health systems. Requiring earned revenue, real customer scale, and gender-inclusive teams signals that this is growth capital for commercially serious ventures, not seed money. The strongest fits are established, revenue-generating healthcare enterprises ready to scale access for underserved populations. Geographies: Global. Who can apply: For-profit and hybrid healthcare social enterprises serving low-income and underserved populations in low- and middle-income countries, using combined physical and digital (brick-and-click) healthcare delivery models. Applicants must demonstrate measurable social impact, generate at least 50% of income through earned revenue, have been established no later than December 2023, already serve at least 50,000 people with potential to scale, and have at least 30% low-income customers. Preference for gender-inclusive enterprises with at least one female founder or at least 30% women in management. Funding amount: Pilot funding of up to USD $45,000 for the 6-8 shortlisted social enterprises; up to USD $1 million in blended funding (up to USD $600,000 unconditional plus up to USD $400,000 conditional) shared among 3-4 finalists over a two-year implementation period; total programme funding approximately USD $1.3 million. Targeted Sectors / SDGs: Innovation, Science & Technology · SDG3; SDG5. Deadline: October 4, 2026. Learn more and apply here. Horizon HealthTech 2026, IIITD Innovation & Incubation Center. *Closing soon!* IIITD Innovation and Incubation Center is opening Horizon HealthTech 2026, a nine-month MedTech incubation cohort run under the aegis of BIRAC EDGE for founders building medical devices, diagnostics, surgical and interventional tools, or remote monitoring. The center is backing teams that already hold a validated proof of concept and want to reach a tested prototype, pairing each founder with a named expert and clinical validation through a hospital partner. What they seek to back is Indian health technology that can survive real clinical scrutiny and regulatory review, not slideware. The structure, with lab access, CDSCO guidance, IP support, and investor connects, signals a program built to make startups ready for follow-on capital. The strongest fits are early-stage MedTech teams with defensible IP and a working path from bench to bedside. Geographies: India. Who can apply: Early-stage teams/startups with a validated idea/proof of concept (TRL 3 onwards) working on medical devices, diagnostics, surgical/interventional technologies, or remote monitoring, holding IP or with potential to generate IP. Funding amount: No cash award amount is stated on the official program page. Benefits are in-kind: prototyping lab and equipment access, clinical/hospital validation (Max Healthcare), expert mentorship, CDSCO regulatory guidance, IP filing support, workspace, cloud credits and tools, and investor connects. Run under the aegis of BIRAC EDGE and builds a path to follow-on Government/VC/Angel funding. Targeted Sectors / SDGs: Innovation, Science & Technology · SDG3; SDG9. Deadline: October 5, 2026. Learn more and apply here. OpenAI AI and Teen Development Research Grant Program, OpenAI. *New!* *Closing soon!* OpenAI is opening its AI and Teen Development Research Grant Program to fund independent studies of how generative AI shapes the lives of young people ages 13 to 17. OpenAI wants a stronger evidence base on how teens actually use these tools and what that use does to their social and emotional development, so that product teams, policymakers, and regulators can act on findings rather than assumptions. It seeks work on emotion regulation, relationships, belonging, and the safeguards that keep teens safer, welcoming interdisciplinary teams and any methodology. That it will fund research whose conclusions may not favor AI providers, and prioritizes studies touching ChatGPT, signals a genuine appetite for credible outside scrutiny. The strongest fits are research groups grounded in adolescent development, well-being, and AI safety. Geographies: Global. Who can apply: Researchers aged 18 or older who are affiliated with a research institution or organization, and/or have significant experience relevant to child or adolescent development, well-being, human-computer interaction, AI impacts, or a closely related field. Multiple institutions may collaborate. OpenAI is seeking to fund research rather than for-profit initiatives and will not prioritize for-profit organizations. Funding amount: Individual research grants up to USD $1 million, totaling up to USD $5 million; maximum 10% of each grant for overhead or indirect costs. Targeted Sectors / SDGs: Social Inclusion & Community Wellbeing; Innovation, Science & Technology. Deadline: October 6, 2026. Learn more and apply here.
Essentia Health celebrates start of construction for new downtown Moorhead clinic
MOORHEAD (KFGO) - Essentia Health is starting construction on a new family medicine clinic in downtown Moorhea...
Nor’easter doesn’t stop North Fork Breast Health Coalition’s 28th Annual 5K
Despite rainy, windy weather from a lingering nor’easter, a good crowd turned out Sunday for the North Fork Breast Health Coalition’s 28th annual 5K walk at Tanger Outlets in Riverhead.
Federal court will hear if Wake schools wrongly suspended GOP candidate from job
Scott Lassiter charges Wake suspended him as an assistant principal in 2024 to help his Democratic opponent running for NC Senate.
Lesbian Bar Project Co-Founder: Purity Politics Could Destroy Our Remaining Spaces
Subscribe As a professional lesbian and Massachusetts native, I’ve recently been asked by a lot of folks what I think about the saga unfolding at Last Ditch. The now-viral story, first reported by The Boston Globe, centers on a Western Massachusetts lesbian bar that lifted its mask requirement for one night a week to help drum up business. The decision ignited an intra-queer controversy that has been feasted on by media outlets across the political spectrum—from the New York Post to LGBTQ Nation—and is even reportedly being eyed for a Hollywood adaptation. Apparently nothing is more entertaining than a bunch of lesbians and queers fighting with each other over KN-95s. What has been lost in all of the chatter and media coverage is the very real possibility that Last Ditch, which just opened in April 2025, will have to close its doors. The venue’s one remaining founder, Jackie Matellian, revealed in a community Zoom meeting that she’s working four jobs, is now solely responsible for the bar’s $50,000 business loan and is struggling to keep up with the bills. So as we laugh about the controversy’s similarity to a “Portlandia” skit and how one of the bar’s founders left to enroll in clown school, we forget that yet another lesbian bar is facing an existential crisis—and this time the call is coming from inside the house. In 2020, my friend Elina Street and I created The Lesbian Bar Project, an Emmy-, Webby- and GLAAD Media Award-winning docuseries and initiative that tells the stories of lesbian queer bars around the world. We were moved to act because at the time there were only an estimated 16 lesbian bars in the United States, and the pandemic threatened to bring that number down even further. There are now more sapphic bars than there were just before the pandemic—about 36 of them in total—but this is down from approximately 200 in 1980. Maybe that doesn’t mean much to you, but for the millions of sapphics living in the U.S., this number is calamitous. As the world laughs at lesbians and sapphics, I want to take a second and tell you what I feel when I walk into one of these bars, which are all unique and irreplaceable in their own way: I feel seen. Sometimes I think Cubbyhole in New York City’s West Village neighborhood knew I was gay before I did. When I walked in there for the first time, before I was even out, I was transfixed by the colorful array of tchotchkes hanging from the ceiling and how the women standing next to me were completely unafraid to express their desire for one another. I knew the minute I was ready to come out, I had a home. I also felt the joy of a new couple falling in love at Seattle’s Wildrose, the quiet confidence of a short king lining up her shot at the pool table at Ginger’s in Brooklyn and the kick of cayenne pepper in Julie Mabry’s crawfish at Houston’s Pearl Bar. Subscribe Lesbian bars don’t just serve lesbians; they serve queer folks across the spectrum, including bisexual, pansexual and trans people. As Elina and I traveled across the U.S. and Europe and to parts of Latin America to document the bar owners, staff and patrons that make up the ecosystems of these spaces, we also became uniquely acquainted with the factors that threaten their existence: gentrification, wage gaps, sexism, environmental disasters, gun violence, rising insurance premiums and political administrations working to annihilate queer people and their families. Lesbian bar owners, like all leaders and entrepreneurs, are imperfect. There have been significant issues over the years at lesbian bars: employee harassment, racism, lack of accessibility, sexual assault and transphobia. All bar owners should be held accountable and should listen to their communities to evolve into safer and more equitable spaces. I also acknowledge my privilege: I am able-bodied, white, cis and from a family system that loves me for who I am. Not everyone has that. Queer people, especially trans and bisexual people, are suffering from disproportionately high levels of depression, and our mental health system isn’t equipped to support them. Immunocompromised people and long COVID are real, and many of my friends are suffering to this day. The people with the least safety net are often the ones for whom a bar closing costs the most. And yet, as we’re seeing with Last Ditch, the queer community often lashes out at each other. It’s also the mainstream media taking the internal conflict and making a mockery out of it, distracting from the real possibility that this bar could close due to financial pressures. A bar that many people loved and needed is facing extinction. Perhaps it’s safer to dissent with one another than with the larger forces trying to eradicate us, but in doing so, we risk destroying the few spaces we have left. Due to the constraints of purity politics—some in good faith, some not so much—lesbian bar owners, almost all of whom are queer women themselves, are forced to be everything for everyone, similarly to how women are forced to be everything for everyone. By asking these bars to uphold impossible standards—standards very few other third spaces are asked to consider—we all end up losing. I want to move as a community toward dialogue, compassionate dissent and collaboration to make our spaces better with the goal of keeping them OPEN and thriving, rather than destroying them from the inside with expectations that are arguably unattainable. Subscribe While I have your attention—for this fleeting second of the news cycle—may I urge us to spearhead a way to keep these small businesses afloat without attacking our own community along the way? Bar owners are left with an impasse: They want to be community-centered, but they also have to make money to keep their doors open. Sometimes they might make business decisions that don’t work for everyone—and that’s partly because different patrons have different priorities and want different things—but these owners deserve the opportunity for productive dialogue**.** We have to work with them and with each other to keep our spaces open, to keep them growing. Lesbian bars raised me into the queer woman I am today. One thing I think about as I reflect on the six years of work we’ve done to document these spaces is that shared, unspoken language I have with a stranger the moment we both walk into one of these bars: the nod, the ease, the not having to explain ourselves. I don’t want to lose that, and neither should you. If objective, nonpartisan, rigorous, LGBTQ-focused journalism is important to you, please consider making a tax-deductible donation through our 501(c)(3) fiscal sponsor, Resource Impact, by clicking this button: Donate
I Never Thought “Explosive Diarrhea” Would Become a Reason to Vote Blue, but Here We Are
These foodborne illness outbreaks have certainly put the Republican party in a sh*tty situation.
Sutter Opens New Urgent Care in San Francisco's Mission Bay
New clinic brings same-day care to one of San Francisco’s fastest-growing neighborhoods SAN FRANCISCO – Residents, workers and visitors in Mission Bay now have a new option for same-day medical care with the opening of Sutter Health’s newest urgent care clinic near Oracle Park. Located at 240 King St., the 2,156-square-foot clinic has four exam […]
Tybee Island Marine Science Center releases loggerhead sea turtle ‘Ossie’ back into ocean
Biologists at the Tybee Island Marine Science Center released resident loggerhead sea turtle “Ossie” into the Atlantic Ocean on Saturday morning.
Intel Panther Lake Teardown, 18A, BSPD, GAAFET, SemiAnalysis STEEL
Panther Lake debuts the first commercial implementation of backside power delivery (BSPDN), introduces Intel’s first iteration of gate-all-around (GAA) transistors, and showcases their advanced packaging capabilities with its Foveros-S assembly. With Panther Lake, Intel’s manufacturing arc has shifted from nebulous roadmaps to shipped silicon, a significant milestone on their long road back to competitive semiconductor manufacturing. To evaluate the extent of Intel’s comeback, we tore down Panther Lake. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Our teardown traces 18A from its four-sheet RibbonFETs (Intel’s marketing name for GAAFETs) and gate stacks through contacts, frontside and backside wiring, and the bonded carrier. We explain how these material and integration choices improve gate control and reduce resistance, while adding capacitance, thermal resistance, and process complexity. Our measurements put Panther Lake’s 18A compute logic and TSMC N3E GPU logic at similar logic density. However, 18A does not lead TSMC N3P, N2 or Samsung SF2 in peak density. Panther Lake’s CPU cores are incremental updates, and the high-end GPU still uses TSMC N3E. Panther Lake assembles one compute tile, one GPU tile, and one I/O tile atop a passive base tile using Intel’s Foveros-S advanced packaging. Both compute tile variants use Intel 18A. The Xe3 GPU options are a 4-core GT1 tile on Intel 3 and a larger 12-core GT2 tile on TSMC N3E. Both I/O tile variants use TSMC N6. [1], [2] Our analysis centers on the PTL-U compute tile, both the 4-core and 12-core GPU tiles, as well as the 12-lane I/O tile. In conventional chips, power and signal are routed through the same frontside metal stack towards the device frontend. Power rails consume scarce routing resources near the transistors, while tall via stacks carry VDD and VSS from the coarse upper wires to local rails. Backside power delivery (BSPD) moves the main power network behind the transistor layer, to the backside, separating it from frontside signal routing. We covered BSPD and its impacts in 2024. [3], [4], [5] Intel’s BSPD implementation, branded as “PowerVia”, routes power through dedicated backside metals to nano-TSVs, which connect those rails to local source/drain (S/D) contacts. Implementing that separation requires Intel to build the interconnect stacks from both sides of the wafer. The frontside comprises the M0-M14 signal stack, while the backside comprises the BM0-BM5 power stack. M0 and BM0 are closest to the transistors. The nano-TSVs connect the two sides, but Intel patterns and etches each via from the front after forming the contacts. A narrow via runs from the side of the contact deep into the silicon substrate. Intel then completes the frontside signal metal stack, bonds the wafer to a carrier, flips it and removes the original substrate until the buried via tips are exposed. The backside metal stack is then deposited directly on the revealed vias. The nano-TSV and backside-via profiles taper in opposite directions because Intel forms them from opposite sides of the wafer. The transistor structures form the FEOL. Local contacts and nano-TSVs connect them to the wiring. M0 begins the frontside interconnect stack. The silicon carrier remains attached above the frontside interconnects. It supports the device wafer during substrate removal and backside processing and remains part of the finished chip’s thermal path. PowerVia removes the main power distribution from the congested frontside metals, routing supply through shorter and wider backside wires. Its lateral landing still occupies area in the standard cell, so it recovers less cell area than a direct backside contact. [3] Nano-TSVs beside the logic devices carry VDD or VSS from the backside power network, while signal connections continue upward through the frontside metals. Backside Interconnects Samsung SF2 data is included for comparison to Panther Lake’s within this article. SF2 is the incumbent GAA foundry node but lacks BSPD, serving as a useful reference to evaluate 18A. A full teardown of Samsung’s S26 products, processed on SF2, will be shared soon.Nanosheet-cut EDS comparison. The PowerVia supply path runs from the backside Cu rails through Mo-lined W nano-TSVs to the local transistor contacts. In this cross section, the tapered connection spans roughly 150 nm from the contact level to BM0. The Ta liner confines Cu and promotes adhesion to the surrounding stack; the AlOₓ etch stop controls the next dielectric etch above the rail. Dielectric beneath the ribbons electrically separates the devices from the backside wiring and removes the conducting silicon body below the channel. [6] AlOₓ serves as an etchstop (ES), enabling endpointing and protecting the underlying layers. Low-volatility aluminum fluoride reaction products resist the fluorinated plasma, allowing a thin AlOₓ film to protect the metal while the surrounding low-k dielectric is removed. [6], [7]. While the BM0 and layers above the M1 lines show double AlOx layers, Our SMIC N+3 teardown showed single AlOₓ layers. SMIC uses a simpler local AlOₓ substack, while the remaining cap and etch sequence provide the required landing protection. So why double layers? The closely spaced AlOₓ doublets provide two protected endpoints in the etch sequence. Intel documents an AlOₓ/SiN/AlOₓ stack that explains the benefit. The main dielectric plasma etch stops on the first AlOₓ film; a selective wet clear opens that film; a second plasma etch removes the intermediate SiN and stops on the second AlOₓ film. The final wet clear exposes the metal landing surface. SiN is the intermediate dielectric in Intel’s published example. [8] The second stop protects the metal through a cap breakthrough. Wide openings can etch faster than narrow ones, and etch depth varies across the wafer. Metal under an early-clearing opening would otherwise be exposed while other openings still need more etching. Staged protection widens the process window and reduces metal erosion, corrosion and void formation. [8] TSMC documents AlN/AlOₓ/SiOC/AlOₓ above Cu, with AlN blocking Cu diffusion, and a simpler AlN/SiOC/AlOₓ variant that omits one AlOx film. [9] Levels with different opening sizes, aspect ratios, pattern densities and cap materials need different etch margins. A double AlOx stop is useful where another protected endpoint justifies the added processing. The extra film adds formation, selective opening and cleaning steps, plus another set of interfaces to control adhesion, moisture, and stress. These blanket films are opened through the existing via pattern, so each film does not require another lithography mask. AlOₓ adds parasitic capacitance when it replaces lower-k dielectric; two thin AlOₓ films can nevertheless contain less AlOₓ than one thick film. Total thickness, placement, and theintermediate dielectric determine the electrical cost. Deposition chemistry also changes AlOx permittivity and residual hydroxyl content, which can oxidize the underlying metal. [7], [8], [10], [11] The backside stack separates into relatively fine BM0-BM2 wiring near the devices and coarser BM3-BM5 power distribution. The largest pitch increase occurs between BM2 and BM3. BM0’s pitch closely matches the logic-row height, fitting local power delivery to the cell rows. Higher levels aggregate current through larger conductors: routing density becomes less important than low resistance and current capacity as the network approaches the package. This hierarchy provides wide power wiring for the power delivery network without consuming scarce frontside signal-routing resources. [3] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Frontside Interconnects Intel 18A combines Mo-lined W contacts and nano-TSVs with a separate backside Cu power network. Samsung SF2 keeps power on the frontside, using Ti-based contact interfaces and Ta-based barriers and Co liners around Cu wiring. In 18A standard-cell rows, backside power rails supply the devices through nano-TSVs within the cells, freeing frontside routing resources. Samsung’s M0 accommodates both power and signal connections. From the device toward M0, the connection runs through a Ti-based S/D interface, W contact fill, a Mo-lined W via, and the Cu M0 wire. Mo supplies a conductive nucleation and adhesion layer for W, replacing the resistive TiN liner used in conventional W integration. This increases the effective conduction volume within the feature while retaining W fill and its established polishing, cleaning and etching processes. Intel’s Mo/W patent describes this integration tradeoff. The nano-TSV uses the same Mo-lined W construction in the backside supply path. [12] The move from TiN to Mo is an incremental change. While a full Co or Mo fill can also reduce the volume lost to liners in very small features, it requires new integration schemes that increase complexity and risk. Cu remains attractive for wider wires due to its low resistance. As wires and vias shrink, the diffusion barrier consumes an increasing fraction of their cross-section. [12], [12], [14] Intel uses Co/Ru liners at M0-M1, Co at M2-M4, and Nb at M5-M9. The lower-level liners help Cu adhere and reduce void formation during trench fills. Applied Materials’ Endura has new thermal control that facilitate wetting process, so the thin film continuity is good enough that good capillary pressure will drive Cu atoms to the via bottom without voiding. Intel’s choice to use Nb is particularly interesting. Intel’s Nb patent describes a conductive diffusion barrier intended to reduce the barrier’s contribution to resistance relative to conventional Ta-based barriers, particularly at via bottoms where all current crosses the barrier. The patent pairs Nb in coarser levels with the option of lower-cost PVD processing. [15], [16] The upper metal layers support thicker barriers formed through physical vapor deposition (PVD) despite its worse coverage and uniformity. Meanwhile, the lower metal layers require thinner barriers deposited through conformal atomic layer deposition (ALD). Co/Ru adds another material interface and requires controlled deposition and Cu fill. Changing liners and barriers by metal layer allows Intel to optimize interconnect resistance, process complexity, and reliability. [15, 16] RibbonFET, Intel’s name for its gate-all-around FETs (GAAFETs), replaces the FinFET’s vertical fins with four stacked horizontal silicon nanosheets, allowing the gate to surround the channel on every side. The path to GAAFET begins with the planar transistor. A planar MOSFET places the gate above the channel between its source and drain. Pairing an NMOS with a PMOS transistor creates a CMOS inverter, in which the NMOS pulls the output low for a high input, and the PMOS pulls it high for a low input. The gate must retain electrostatic control of the channel to ensure clean switching. As gate lengths shrank, the drain began to compete with the gate for that control, increasing off-state leakage. Electrostatic control was restored through an architectural evolution that raised the channel into a vertical fin and wrapping the gate around three sides. Called “FinFET”, this new architecture packed more effective channel width into a smaller footprint. Further scaling made it harder to maintain both drive current and leakage within smaller cells, and reintroduced the same problems planar MOSFETs faced. Nanosheet GAAFETs close the fourth side by replacing the vertical fin with a stack of horizontal nanosheets, each surrounded by the gate. The tighter electrostatic control suppresses leakage at shorter gate lengths while stacking adds effective channel width within the cell footprint. In a FinFET process, channel width changes in discrete steps as designers must add or remove whole fins. Nanosheet width can instead be adjusted continuously within the process’s design rules. Wider sheets increase drive current, while narrower sheets reduce capacitance at the cost of drive current. Intel 18A uses stacks of four nanosheets each and varies their widths across logic and SRAM. At the process level, adding more sheets to each stack increases effective channel width and drive current, but complicates fabrication. RibbonFET vs MBCFET Samsung began GAAFET production in 2022 with SF3E, following with SF3 and now SF2. Its ‘MBCFET’ provides a useful structural comparison with Intel’s first RibbonFET implementation. [17] STEEL is digging deeper into SF2, used in the Exynos 2600, and TSMC’s GAAFET N2, used in Apple’s A20 Pro, in upcoming newsletter articles. We’re throwing some teasers on X. Let’s compare Samsung SF2’s MBCFET with Intel 18A’s RibbonFET. Subscribe Even to the untrained eye, Intel’s extra nanosheet is obvious. Intel stacks four ribbons to Samsung’s three. Samsung’s sheets are much wider in these fields, so both sheet count and width matter to the available channel perimeter. Sheet width also changes which silicon surfaces carry current. On conventional (001) silicon, wide nanosheets emphasize the broad top and bottom surfaces, favoring electron transport; the larger sidewall contribution in a narrow sheet favors hole transport. Thinner sheets improve gate control but increase confinement and scattering. This makes width and thickness part of the NMOS/PMOS balance, alongside strain and threshold voltage. [18], [19] GAAFET designs like 18A use different work-function-metal (WFM) stacks for NMOS and PMOS. Around each ribbon, a thin SiOx interfacial layer separates the silicon channel from the HfOx high-k dielectric, with La providing dipole tuning and the WFM wrapping the dielectric. NMOS uses a TiAl-based stack, while PMOS uses TiN WFM. W fills the remaining gate trench, providing a lower-resistivity path where the work-function layers are no longer needed. In this field, the PMOS stacks leave room for W between ribbons, while the NMOS stacks occupy more of those gaps. A silicon-based dielectric marks the P/N boundary, allowing the PMOS and NMOS gates, sharing the same gate trench, to be processed sequentially. Fast logic paths, retention circuits, and SRAM need a family of threshold options. Changing threshold without substantially changing device dimensions, capacitance or fabrication complexity is valuable. FinFET processes typically use different work-function-metal stacks. In a four-ribbon GAA stack, the narrow sheet-to-sheet gap limits how much WFM can fit around each channel. La in the gate dielectric creates interfacial dipoles at the SiOx/HfOx boundary, shifting effective work function and tuning threshold voltage. This gives Intel another control alongside its NMOS and PMOS WFM stacks. Low-threshold devices improve critical-path drive; higher thresholds reduce leakage elsewhere. Dipole tuning is especially useful in GAA because it changes threshold without consuming the narrow intersheet gap with thicker WFM. Precise control of La incorporation, diffusion and interface quality has long been a challenge, limiting viability in high volume production but is now seen from every leading-edge foundry. Intel’s patent describes depositing a dipole-forming oxide above HfOx and annealing it toward the interfacial oxide before completing the work-function and fill metals. This separates threshold tuning from the space available for metal. Newer research addresses the thermal cost: imec’s 2026 dipole-middle research inserts the shifter between two HfOx depositions, shortening the diffusion path while protecting SiOx during patterning. [20], [21]Matched-cut EDS, Intel 18A (left) vs. Samsung SF2 (right). Intel retains raised source/drain epi beneath its contacts, while Samsung recesses W deep into the epi to form a V-shaped Ti-lined interface. The deeper contact increases metal-to-semiconductor area and shortens the current path from the lower sheets, reducing contact and spreading resistance. It also removes epi volume and brings the contact etch closer to the channel ends. Retaining more epi preserves the material available for strain transfer, especially from SiGe into PMOS. These geometries balance contact access against stress engineering and etch margin. [22], [23] Samsung stacks three sheets to Intel’s four ribbons, and both processes use sheet width to tune drive strength. In our Samsung cross-sections, widths range roughly from 19 to 30 nm in the NPU rows and 37 to 50 nm in the CU cell. The Samsung nanosheets taper, with the widest sheet at the bottom and the narrowest at the top. Both processes use HfOx gate dielectric and Ti-based work-function stacks, with Al in the NMOS stack. In the Samsung devices shown here, the dielectric and WFM occupy the intersheet gaps, leaving W above the top sheet. Intel’s PMOS stack leaves more room between ribbons, and W fills those gaps while the thicker NMOS stack leaves W mainly in the upper trench. Gate-stack EDS maps. The W between Intel’s PMOS ribbons provides a conductive path close to the lower gates. Where WFM fills the entire gap, the gate still surrounds the channel, but voltage reaches it through the more resistive work-function films. Thinner WFM and dipole tuning preserve room for low-resistivity fill; Mo and Ru are alternative fill metals being developed for further scaling. [24] A masked, sequential WFM flow explains the different gate heights and inter-nanosheet fill. The proposed sequence below shows how separate NMOS and PMOS work-function steps produce that geometry. Enabled by the BSPDN process, Intel replaces the dense-logic silicon subfin with dielectric, removing the parasitic conduction path below the ribbons and reducing substrate-related capacitance. A retained silicon body as in classical, non-SOI, planar and FinFET designs needs junction and punchthrough-stop engineering to suppress leakage. Dielectric isolation makes that leakage less sensitive to the subfin doping profile but adds removal and fill steps. It also weakens the direct thermal path through silicon, making the contacts, metal stacks and package more important for heat extraction. [24], [26] Fluorine is concentrated around selected Intel device structures in the maps. WF6 is a standard precursor for W nucleation and fill, while barrier films protect adjacent dielectrics from fluorine attack. Low-fluorine W processes reduce the residual-F burden. Chloride-based precursors avoid introducing F during W deposition, but require control of chlorine attack, nucleation and fill quality. The integration target is a continuous, low-resistance W path with a thin protective liner and minimal chemical damage to the surrounding stack. [20], [27], [28] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. We measured cell height, gate pitch, metal geometry, and ribbon dimensions at the XTEM sites shown below. The tables group these dimensions by site and device polarity. Our “sheet cuts” cross the silicon channel and show the ribbons end-on. “gate cuts” run along the channel through successive gates. The 18A logic cell dimensions point to a five-track logic library while the N3E and Intel 3 cell dimensions evidence a seven-track logic library. The DDR-PHY uses wider M0 wires and much larger spacing than core logic. That trades routing density for lower wire resistance and weaker coupling between neighboring nets. The geometry suits the current delivery and coupling requirements of analog, clock, and I/O circuitry. PowerVia lets 18A combine a compact cell height with wider M0 geometry by moving the main power rails off the signal-routing tracks. That relaxes local wire scaling while preserving a small cell footprint. Cell height and gate pitch set the geometric density; pin access and routability determine how much of it a real block can use. [29] The biggest takeaway from our gate-pitch measurements is that Intel 18A compute logic and TSMC N3E GPU logic have similar density in the Bohr representative-cell model. The 18A example is 18.6% denser than the Intel 3 GPU example. Gate pitches are nearly identical across the three sites, so cell height drives most of the difference. The Bohr model combines a four-transistor NAND2 spanning three gate pitches and a 32-transistor scan flip-flop (SFF) spanning nineteen pitches, weighting their densities 60:40. The sensitivity column shows how independently changing cell height and gate pitch by ±1 nm changes the result. This compares representative cell geometries; whole-die density also depends on cell mix and placement. The 18A P-core gives M0 substantially more metal cross section than the N3E vector engine. Treating each profile as a trapezoid gives 2.63 times the area per line and 1.84 times the area after normalization by routing pitch. The larger section reduces the geometric contribution to line resistance and lowers current density for a given current. Taller and wider wires also add capacitance, so circuit delay depends on the balance of resistance and capacitance. The DDR-PHY has less metal area per routing width than the 18A core fields, while remaining above N3E. [30] Area = height × (top CD + bottom CD) / 2, including liners. Area/pitch normalizes by routing width. Taper is the symmetric sidewall angle from vertical, with the largest angle belonging to the DDR-PHY. Compute tile The measurements show how ribbon dimensions and gate-stack geometry vary across the compute tile and between NMOS and PMOS to balance channel drive, gate load and the space needed for the dielectric/WFM stack across logic, SRAM and the DDR-PHY. Width mainly changes available channel perimeter; thickness also changes electrostatic control and carrier confinement. Gate-stack thickness then determines the space left for low-resistivity fill P-core and LP E-core logic Both the P-core and LP E-core use multiple nanosheet widths. Widths are measured on high-magnification XTEMs while wider-field images demonstrate additional width choices within the LP E-core. Multiple widths are expected even within an LP E-core. Timing-critical paths, buffers and cells with different fanout need different drive strengths. The lower-magnification fields show this width diversity beyond the sites quantified in the table. L2 and L3 SRAM GAA gives SRAM designers another way to balance the pull-up (PU), pass-gate (PG), and pull-down (PD) transistors. FinFET bitcells set device strength through fin count while GAA adds nanosheet width as a sizing knob. In a 6T SRAM cell, a strong pull-down relative to the pass-gate limits read disturbance, while a strong pass-gate relative to the pull-up improves writability. During a write, the pass-gate and write driver pull the node storing “1” below the inverter trip point. During a read, the pull-down holds the node storing “0” low. Bias, threshold voltage, mismatch and assist circuitry set the remaining margin. FinFET high-current cells commonly use a PU:PG:PD fin-count pattern of 1:2:2, a device-sizing ratio rather than a current ratio. Ribbon width lets Intel balance SRAM strengths without adding whole fins. The L2 cell uses its narrowest ribbons for PU and widest for PD, improving writability and read stability respectively. Intel’s disclosed HCC operates without assist; its denser HDC uses negative-bitline write assist. Pulling the selected bitline briefly below ground increases pass-gate overdrive so it can overpower the pull-up at lower supply voltage. That buys density and low voltage writability at the cost of boosting circuitry, switching energy, and additional voltage stress that must be controlled. [31], [32] Four rectangular ribbons give the perimeter = 8 × (width + thickness), before corner rounding. PG/PU is 1.49 and PD/PG is 1.16. The L3 structures closely resemble L2 in layout and cell height. Fewer L3 nanosheet widths are tabulated because fewer high-magnification images were available. DDR PHY The DDR-PHY trades density for controlled analog behavior and reliable off-chip signaling. It contains drivers, receivers, delay circuits, and calibration logic that set drive strength, sampling time, and voltage margin. Repeated four-sheet devices with similar widths fit the use of regular transistor units for matching and programmable drive. Its wider local wiring provides room for current delivery and separation of sensitive signals, while consuming more area than a dense core-logic grid. The layout serves the memory channel’s electrical requirements as well as digital logic density. [33] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Intel 3 GPU devices Vector engine logic Intel 3’s XVE logic uses two-fin PMOS and NMOS devices with power rails in M0. Its cell height and M0 pitch give a seven-track geometry, two tracks more than the 18A logic. One-fin groups also appear among the two-fin devices. Intel 3 L2 SRAM The Intel 3 L2 SRAM uses the familiar HCC sizing pattern: one PU fin, two PG fins, and two PD fins. N3E GPU devices Vector engine logic The N3E XVE field contains repeated two-fin devices with seven-track cell geometry. N3E remains a FinFET process, giving Panther Lake a direct FinFET-to-RibbonFET comparison. N3E L2 SRAM The N3E L2 SRAM uses the same PU:PG:PD fin-count pattern of 1:2:2. Panther Lake-U follows Lunar Lake’s floorplan quite closely. Both pair 4 P-cores with 4 LP E-cores and NPU, media and display engines in similar locations. Lunar Lake also uses Xe2, the direct predecessor to Panther Lake’s Xe3 GPU. This makes Lunar Lake the most direct basis for our comparisons. Arrow Lake differs in core count and uses the older Xe-LPG GPU architecture, so we only use it where it offers a more direct component-level comparison. Compute tile Panther Lake compute-tile floorplans remain sparse even months after launch. Intel 18A’s backside metal and dielectric stack must be removed without damaging the underlying structures before a clean transistor-level floorplan can be imaged. Most published die shots hide or heavily process the background, but we are quite proud of the die shot we achieved and are excited to show the work we have done. We measured the areas of the key components on the compute tile and compared them with their Lunar Lake predecessors on TSMC N3B. These help us to capture changes in block area and compare the two chips across process nodes and designs. Our total tile areas exclude the scribe-line area. The compute-plus-GPU subtotal below uses the PTL-U compute tile and GT1 GPU; it excludes the I/O tile and passive base. Individual block areas use the boundaries marked on the floorplans The compute-plus-GPU row is recomputed from the displayed PTL-U and GT1 areas. Component rows use their stated per-region counts and are not an additive partition of the whole tile. The P-core area remains almost unchanged between Lunar Lake and Panther Lake, despite L2 capacity increasing from 2.5 MiB to 3 MiB. Arrow Lake uses the same Lion Cove core as Lunar Lake but also has a 3 MiB L2. Cougar Cove fits 20% more L2 into the same P-core area. The larger private cache keeps more of each core’s working set close to its execution units, reducing access to shared L3 and DRAM. Extra capacity adds storage leakage and lookup energy, so designers balance it against avoided lower-level accesses. The shared P-core L3 cache also shrank by 14.8%. [2] Cougar Cove combines a similar footprint with Intel’s reported power-efficiency improvements. RibbonFET’s tighter channel control reduces leakage, while PowerVia reduces supply droop and allows tighter voltage guardbands. [1] Darkmont’s four-core LP E-core cluster is 5.0% smaller than Skymont’s on Lunar Lake, with most of the reduction in its L2 regions. The 1 MiB region shrank by 8.4% and the 1.5 MiB region by 14.9%. The tag arrays also use one fewer visible row. Tags identify which memory addresses the data array holds, so rearranging them changes the cache’s layout and wiring without requiring less data capacity. [2] The LP E-cores share one L2. This pools capacity and avoids duplicating all the cache machinery, but the four cores contend for its banks and bandwidth. Their separate cluster also keeps light work away from the performance cluster and its L3, allowing that larger domain to sleep. [1], [2] Cache area includes more than the storage cells. Tags identify each line, decoders select rows, sense amplifiers read the small bitline signal, and wires connect to the banks. Splitting an array into smaller sections shortens wordlines and bitlines, improving access speed, but duplicates peripheral circuits. Panther Lake’s smaller cache regions therefore reflect the complete memory implementation, including how much of each region is devoted to storage. [34] Unlike Meteor Lake and Arrow Lake, Panther Lake has no separate SoC tile. The NPU, LP E-cores, memory controllers, PHYs, media and display engines now share the compute tile. This removes an active die and keeps CPU memory traffic on one die. The cost is moving PHY and I/O-related circuitry onto 18A: drivers, receivers and analog circuits must still meet external voltage, loading and signal-integrity requirements, so their area does not shrink like dense digital logic. [1], [2] The biggest shrink comes from the NPU, which occupies 36.9% less area. NPU 5 consolidates the same total INT8 MAC count into half as many neural compute engines. Each of the three NCEs has a larger MAC array to make the complete NCE envelope 22.6% larger than an NPU 4 engine. Consolidation also halves the number of scratchpads and SHAVE DSPs, from 12 to 6. The MAC array handles matrix multiplication and convolution, while SHAVE executes vector and custom operations that fit the array poorly. [1], [2], [35] The paired floorplans identify each NCE envelope and its scratchpad, MAC, and SHAVE regions. Each measured MAC polygon is counted once per NCE in the area accounting below. The scratchpads store weights, activations, and intermediate results near the MAC arrays, allowing repeated use without fetching them again from DRAM. Halving their number delivers the largest measured area saving but leaves less local storage for the same total MAC count. Layers that no longer fit locally require smaller working tiles or more transfers of intermediate data. The benefit depends on keeping the enlarged arrays busy while managing that tighter storage budget. [36] NPU 5 also adds native FP8. Using half the operand width of FP16 reduces storage and transfer demand, helping workloads fit the smaller local memory budget. Lower precision and format-dependent range make scaling and model validation part of deployment. Hardware activation functions further reduce work that would otherwise occupy the programmable DSPs. [1], [2] Microsoft requires an NPU to deliver at least 40 TOPS for Copilot+ PCs. Both Lunar Lake and Panther Lake meet this threshold, but Panther Lake uses significantly less silicon. GPU tiles Panther Lake is Intel’s first product with Xe3, its latest GPU architecture. It offers two different GPU tiles: a smaller GT1 tile with 4 Xe3 cores on Intel 3 and a larger GT2 tile with 12 Xe3 cores on TSMC N3E. Panther Lake allows us to compare the same GPU architecture across both Intel 3 and TSMC N3E. Wildcat Lake adds a third Xe3 implementation on Intel 18A. A future newsletter will detail Xe3 and its implementation differences across all three process nodes. GT2 scales Xe3 to a different physical layout, with render slices arranged vertically instead of GT1’s horizontal arrangement. Slice placement sets the distances to shared cache banks and the D2D interface. Those wires consume area and add delay, so scaling the number of Xe cores also requires a new balance of cache placement, routing and timing. [1] What’s immediately obvious is that the GT2 tile on TSMC N3E has much smaller Xe cores than GT1. These block areas include logic, caches, and routing. An Xe core on the GT1 tile is ~69% larger than one on Lunar Lake, and ~55% larger than one on GT2. Intel 3 therefore uses substantially more area per Xe core. The block-area gap exceeds the measured logic and SRAM density gaps, bringing routing, timing targets, cell mix, and floorplan allocation into the comparison. The measured vector/matrix engine region is almost unchanged between Lunar Lake and Panther Lake’s GT2 tile. Xe3 retains eight 512-bit vector engines and eight 2048-bit XMX engines per core. Its gains also come from feeding those engines more effectively: more resident threads hide stalls, and variable register allocation lets shaders trade registers per thread against the number of threads kept active. [1] The shared L1/SLM capacity increased by 33% from 192 KiB to 256 KiB, while its area increased only 5%, raising effective density by 27%. L1 retains reused cache lines, while software-managed SLM lets a thread group share data locally. Both reduce traffic to more distant memory. Allocating more SLM per group can also limit how many groups reside on a core at once. [1], [37] The GT1 tile carries 4 MiB of L2 against 16 MiB on the GT2 tile. GT1 divides its L2 cache into four 1 MiB banks, while GT2 uses eight 2 MiB banks. Each bank contains 128 macros, but each N3E macro stores 16 KiB, twice the Intel 3 macro’s 8 KiB capacity. The N3E macro is only 54% larger while holding twice as many bits, giving it 30% higher density: ~23.7 Mbit/mm² versus 18.3 Mbit/mm². Including bank-level circuitry, the gap widens to ~16.9 Mbit/mm² on GT2 versus ~10.4 Mbit/mm² on GT1. GT2 gains density with its macros storing more bits per unit area, and those macros occupy more of each cache bank. Larger macros spread decoder and sense-amplifier overhead across more storage, while a more compact bank layout reduces the share spent on control and routing. The compromise is longer wordlines and bitlines that carry more capacitance. [34] I/O tile Panther Lake uses two I/O tile variants, both fabricated on TSMC N6. The smaller one provides 4 PCIe 5.0 and 8 PCIe 4.0 lanes and serves lower-tier systems as well as those without a discrete GPU, while the larger one adds 8 PCIe 5.0 lanes, bringing the total to 20 lanes, for discrete-GPU connectivity. Panther Lake SKUs with the larger 10- or 12-Xe GPUs use the smaller I/O tile. [38] The smaller I/O tile adds a PCIe 4.0 block and a Thunderbolt block to Lunar Lake’s I/O layout, providing four additional PCIe 4.0 lanes and another Thunderbolt 4 port. Its repeated N6 blocks retain nearly identical areas and layouts. Reusing these proven PHYs and controllers avoids porting and requalifying external interfaces on 18A, where faster digital logic offers less benefit to circuits constrained by the off-chip link. [38] SemiAnalysis’s teardown lab (STEEL) dives deep into the world’s advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. We’re hiring technical experts from system to transistor and everywhere in between. Check out our Careers page. Panther Lake offers scalability and modularity through its disaggregated packaging that partition compute, GPU, and I/O silicon into separate tiles allowing for a suite of tile configurations. This partitioning makes the package part of Intel’s node economics as it determines how much leading-edge wafer area each product consumes, which functions can remain on other processes, and how much configuration freedom Intel can offer from a shared set of tiles. Furthermore, fabricating the compute and GPU tiles separately confines the new 18A process to the compute tile and allows graphics and I/O to use other, more established, and more cost-effective processes. For Panther Lake, the GPU and I/O tiles are assembled alongside the compute tile on a passive silicon base using Foveros-S. Intel’s current technology brief lists a nominal 36 µm pitch for Foveros-S. Through-silicon vias (TSVs) in the base connect the fine wiring above to the larger package connections below. The functional tiles sit side by side on that passive base in a 2.5D configuration. [39] Our cross-section through the compute and GPU tiles shows the package’s wiring hierarchy. Microbumps connect each active tile to the passive silicon base; its fine redistribution layer (RDL) carries the short, dense tile-to-tile links. TSVs carry connections through the base to the package substrate, which fans them out to the much coarser motherboard solder joints. The base supplies interconnect, while computation remains in the active tiles above it. [39] At the compute-tile edge, the higher-magnification inset shows a local microbump spacing of approximately 25.24 µm and a feature width of 12.33 µm. These local spacings are finer than Intel’s nominal Foveros-S value. The X-ray fields further confirm tighter neighboring bumps, consistent across every die-to-die area found on each tile. Additional X-ray analysis is offered after the paywall. Putting the memory controller beside the CPU removes the D2D transfer that CPU memory requests required in Meteor Lake and Arrow Lake. This avoids the extra transmitter, receiver, and link traversal, saving interface energy and latency. Panther Lake’s separate GPU still crosses a D2D link to reach DRAM, so its larger local caches also help contain package traffic. [1], [40] Smaller dies are less likely to contain a random fatal defect, and screening them before assembly prevents one bad tile from consuming a complete package of good silicon. Reuse also spreads design and qualification work across more products. Against those gains, Intel pays for the passive base, D2D circuits, extra bonding and test steps, and losses during assembly. Cost per working product across the portfolio captures the combined effect of wafer yield, reuse, test, and assembly. [29] Wildcat Lake packaging Intel launched Core Series 3, formerly Wildcat Lake, on 16 April 2026 for value mobile and edge systems. Wildcat Lake keeps 18A but removes the passive base and combines more functions on one die to simplify the package. The two products therefore reveal two distinct ways to commercialize the same leading-edge process. [41] Wildcat Lake’s 18A die combines up to two Cougar Cove P-cores, four Darkmont LP E-cores, two Xe3 cores and a smaller NPU. A separate platform-controller die supplies I/O, connected through UCIe, Intel’s first processor implementation of the standard. Consolidating graphics remove a tile boundary and the passive base, reducing assembly complexity for a modest-bandwidth value product. It also ties CPU and graphics scaling to the same die, giving up Panther Lake’s ability to swap in a much larger GPU. [42], [43] In July 2021, Intel CEO Pat Gelsinger set out an ambitious process roadmap aimed at regaining performance leadership by 2025, later described as five nodes in four years. Five years and one CEO later, Intel’s comeback story is not as unambiguously positive as Pat may have hoped. [44], [45] Intel once set the pace for process technology, bringing high-k metal gate technology and FinFETs into volume production years ahead of the rest of the industry. Its 22 nm FinFET process reached consumers with Ivy Bridge in 2012. [46] Intel’s integrated device manufacturing (IDM) model allowed its architects and process engineers to co-optimize products and processes. Starting with Sandy Bridge, Intel dominated x86, while AMD struggled with Bulldozer. That lead faltered at 14 nm and broke at 10 nm. Intel targeted a massive 2.7× density increase, but the node arrived years late and required several revisions before it could support Intel’s full lineup. This delay forced Intel to stretch 14 nm across six generations, while TSMC moved ahead in process technology and AMD recovered in x86. By 2019, Intel was still shipping 14 nm across most of its product stack, with its 10 nm client ramp focused on Ice Lake mobile processors. Meanwhile, TSMC was shipping N7 and N7+, and AMD’s Zen 2 compute chiplets used N7 to raise core counts and improve efficiency. Intel’s process failures were central to its decline, but unsound business decisions furthered their downward slide. Product delays compounded product mistakes, pushing client, server, and FPGA roadmaps off schedule. Several attempts to enter AI (Nervana and Gaudi) and networking (Tofino) also failed to establish lasting businesses. Intel’s recovery has focused on consumer CPUs and advanced packaging. Tiger Lake, Alder Lake, Lunar Lake and now Panther Lake have restored Intel’s consumer roadmap. On the process side, Intel 4 shipped with Meteor Lake, Intel 3 with Granite Rapids and Sierra Forest, and Intel 18A with Panther Lake. Intel has also made advanced packaging part of its foundry offering. However, Intel is still playing catch-up in servers. Several Xeon generations arrived years late and trailed contemporary AMD and Arm server CPUs in performance, efficiency, and core count. The process roadmap is back, but Intel does not hold the same process-technology leadership position it held prior to 10 nm. The introduction of gate-all-around nanosheets and backside power delivery are two of the biggest changes to transistor integration in a decade. Intel took on both changes at once: 18A paired its first RibbonFET with PowerVia in Panther Lake. Panther Lake is a substantial manufacturing milestone. Our cross-sections show how RibbonFET and PowerVia reshape local contacts and wiring, while the floorplans show where architectural consolidation and process choices save area. A sustained competitive lead depends on product performance, cost, yield, and the next implementation. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page.. [1] Intel, “Intel Tech Tour 2025 Panther Lake recap,” Doc. 866361, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/866361/ITT_2025_Panther_Lake_Recap1.pdf [2] Intel, “Core Ultra processors Series 3 datasheet, volume 1,” Doc. 872188-001, Jan. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/872188/872188-001.pdf [3] N. Horiguchi and E. Beyne, “Backside power delivery: How to power chips from the backside,” imec Reading Room, Nov. 25, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/how-power-chips-backside [4] W. Hafez et al., “Intel PowerVia technology: Backside power delivery for high density and high-performance computing,” in Proc. IEEE Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2023, pp. 1–2, doi: 10.23919/vlsitechnologyandcir57934.2023.10185208. [5] K. Fischer et al., “Intel 18A platform technology featuring RibbonFET (GAA) and PowerVia for advanced high-performance computing,” in Proc. Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2025, pp. 1–3, doi: 10.23919/vlsitechnologyandcir65189.2025.11075006. [6] K.-F. Cheng, C.-L. Teng, H.-Y. Huang, and H.-C. Chen, “Metal oxide composite as etch stop layer,” U.S. Patent 12 176 247 B2, Dec. 24, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12176247B2/en [7] S. W. King, “Dielectric barrier, etch stop, and metal capping materials for state of the art and beyond metal interconnects,” ECS J. Solid State Sci. Technol., vol. 4, no. 1, pp. N3029–N3047, 2015, doi: 10.1149/2.0051501jss. [8] A. V. Mule’, D. J. Towner, D. Seghete, C. R. Ryder, and A. A. Gonzalez, “Multi-layer etch stop layers for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20220102343 A1, Mar. 31, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20220102343A1/en [9] C.-C. Wang and J. H. Wang, “Interconnect structure with dielectric cap layer and etch stop layer stack,” U.S. Patent Appl. 20230253247 A1, Aug. 10, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20230253247A1/en [10] Y. J. Wu, K.-F. Cheng, C.-C. Lee, H.-K. Chang, and H.-Y. Huang, “Etch stop layer for interconnect structures,” U.S. Patent Appl. 20240332070 A1, Oct. 3, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240332070A1/en [11] M. G. Rainville, N. Shankar, K. S. Reddy, and D. M. Hausmann, “Deposition of aluminum oxide etch stop layers,” U.S. Patent Appl. 20180197770 A1, Jul. 12, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20180197770 [12] J. S. Leib et al., “Conductive lines having molybdenum liner and tungsten fill for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20240429126 A1, Dec. 26, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20240429126 [13] M. Naik, “Cobalt enables power and performance scaling at single-digit logic nodes,” Applied Materials, Dec. 17, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://www.appliedmaterials.com/us/en/blog/blog-posts/cobalt-enables-power-and-performance-scaling-at-single-digit-logic-nodes.html [14] Lam Research, “Breaking through AI’s invisible barrier with molybdenum,” Lam Research Newsroom, May 6, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://newsroom.lamresearch.com/molybdenum-metallization-ai-revolution [15] P. Yashar, G. Malyavanatham, and H. Vijwani, “Integrated circuit interconnect structures with niobium barrier materials,” U.S. Patent Appl. 20240112951 A1, Apr. 4, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240112951A1/en [16] Applied Materials, “Applied Materials unveils chip wiring innovations for more energy-efficient computing,” Applied Materials Investor Relations, Jul. 8, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://ir.appliedmaterials.com/news-releases/news-release-details/applied-materials-unveils-chip-wiring-innovations-more-energy [17] Samsung, “Samsung showcases AI-era vision and latest foundry technologies at SFF 2024,” Samsung Semiconductor, Jun. 13, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://semiconductor.samsung.com/news-events/news/samsung-showcases-ai-era-vision-and-latest-foundry-technologies-at-sff-2024/ [18] C. W. Yeung et al., “Channel geometry impact and narrow sheet effect of stacked nanosheet,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2018, pp. 28.6.1–28.6.4, doi: 10.1109/iedm.2018.8614608. [19] S. Mochizuki et al., “Evaluation of (110) versus (001) channel orientation for improved nFET/pFET device performance trade-off in gate-all-around nanosheet technology,” in Proc. Int. Electron Devices Meeting (IEDM), Dec. 2023, pp. 1–4, doi: 10.1109/iedm45741.2023.10413854. [20] D. G. Ouellette et al., “Fabrication of gate-all-around integrated circuit structures having molybdenum nitride metal gates and gate dielectrics with a dipole layer,” U.S. Patent 12 051 698 B2, Jul. 30, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12051698B2/en [21] imec, “Advancing the CFET-based device roadmap with novel integration modules and standard-cell architectures,” imec, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/advancing-cfet-based-device-roadmap-novel-integration-modules-and-standard-cell [22] A. Reznicek, X. Miao, C. Lee, and J. Zhang, “Wrap around contact for nanosheet source drain epitaxy,” U.S. Patent 11 302 813 B2, Apr. 12, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US11302813B2/en [23] J. A. Kittl, J. G. Hong, D. R. Palle, and M. S. Rodder, “Methods for varied strain on nano-scale field effect transistor devices,” U.S. Patent 9 978 833 B2, May 22, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9978833B2/en [24] S. Gandikota et al., “Method of reducing metal gate resistance for next generation NMOS device application,” Int. Patent Appl. WO 2024/137272 A1, Jun. 27, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/WO2024137272A1/en [25] J. Zhang et al., “Full bottom dielectric isolation to enable stacked nanosheet transistor for low power and high performance applications,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2019, pp. 11.6.1–11.6.4, doi: 10.1109/iedm19573.2019.8993490. [26] C. Yoo, J. Chang, Y. Seon, H. Kim, and J. Jeon, “Analysis of self-heating effects in multi-nanosheet FET considering bottom isolation and package options,” IEEE Trans. Electron Devices, vol. 69, no. 3, pp. 1524–1531, Mar. 2022, doi: 10.1109/ted.2022.3141327. [27] S. S. Pradhan, D. B. Bergstrom, J.-S. Chun, and J. Chiu, “Tungsten gates for non-planar transistors,” European Patent Appl. EP 3 506 367 A1, Jul. 3, 2019. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/EP3506367A1/en [28] L. Schloss and X. Ba, “Tungsten films having low fluorine content,” U.S. Patent 9 754 824 B2, Sep. 5, 2017. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9754824B2/en [29] Intel Foundry, “Accelerating AI and HPC with advanced process and packaging technologies,” Doc. 367370-001US, Jun. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-11/intel-foundry-hpc-ai-brief.pdf [30] M. Lofrano, X. Chang, H. Oprins, and Z. Tokei, “Mitigating the thermal bottleneck in advanced interconnects,” imec, Sep. 28, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/mitigating-thermal-bottleneck-advanced-interconnects [31] S. Bair, “Intel at ISSCC 2025: Navid Shahriari invited talk, eight papers, forums, panelist & product details,” Intel Community, Feb. 19, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://community.intel.com/t5/Blogs/Tech-Innovation/Edge-5G/Intel-at-ISSCC-2025-Navid-Shahriari-Invited-Talk-Eight-Papers/post/1667592 [32] D. Chandra, E. Potladhurthi, D. R. S. Reddy, and K. S. Rengarajan, “Tunable negative bitline write assist and boost attenuation circuit,” U.S. Patent Appl. 20160203857 A1, Jul. 14, 2016. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20160203857A1/en [33] Synopsys, “Advantages of firmware-based training in high-speed DDR IP,” Synopsys IP Technical Bulletin. Accessed: Sep. 14, 2026. [Online]. Available: https://www.synopsys.com/articles/firmware-based-training-ddr-ip.html [34] N. Muralimanohar, R. Balasubramonian, and N. P. Jouppi, “CACTI 6.0: A tool to understand large caches,” Hewlett-Packard Laboratories, 2009. Accessed: Sep. 14, 2026. [Online]. Available: https://users.cs.utah.edu/~rajeev/cacti6/cacti6-tr.pdf [35] Intel, “Intel Tech Tour 2024 Lunar Lake AI hardware accelerators,” Doc. 824436, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/824436/2024_Intel_Tech%20Tour%20TW_Lunar%20Lake%20AI%20Hardware%20Accelerators.pdf [36] Y.-H. Chen, J. Emer, and V. Sze, “Eyeriss: A spatial architecture for energy-efficient dataflow for convolutional neural networks,” in Proc. 43rd ACM/IEEE Annu. Int. Symp. Comput. Archit. (ISCA), Jun. 2016, pp. 367–379, doi: 10.1109/isca.2016.40. [37] Intel, “Introduction to the Xe-HPG architecture,” Doc. 758306, Nov. 4, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/developer/articles/technical/introduction-to-the-xe-hpg-architecture.html [38] Intel, “Core Ultra processors Series 3 for the edge,” Doc. 855291. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/855291/Intel%C2%AE%20Core%E2%84%A2%20Ultra%20Processors%20Series%203%20for%20Edge%20Overview_2.pdf [39] Intel Foundry, “Foveros technology brief,” Doc. 366411-001US, Feb. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-07/foveros-25d-product-brief.pdf [40] D. Das Sharma, “UCIe: Building an open chiplet ecosystem,” UCIe Consortium, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.uciexpress.org/_files/ugd/0c1418_c5970a68ab214ffc97fab16d11581449.pdf [41] Intel, “Intel launches Intel Core Series 3 processors,” Intel Newsroom, Apr. 16, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-launches-intel-core-series-3-processors-changing-the-game-for-everyday-computing.html [42] Intel, “Core Series 3 launch press deck,” Apr. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://download.intel.com/newsroom/2026/Intel-Core-Series-3/Intel-Core-Series-3-Launch-Press-Deck.pdf [43] Intel, “Intel outlines architectures for agentic AI at Hot Chips 2026,” Intel Newsroom, Aug. 24, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-outlines-architectures-for-agentic-ai-at-hot-chips-2026.html [44] Intel, “Intel accelerates process and packaging innovations,” Intel Investor Relations, Jul. 26, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/filings-reports/all-sec-filings/content/0001193125-21-224438/d199788dex991.htm [45] Intel, “Intel reports third-quarter 2021 financial results,” Intel Investor Relations, Oct. 21, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/1505/intel-reports-third-quarter-2021-financial-results [46] Intel, “3rd generation Intel Core processors bring exciting new experiences and fun to the PC,” Intel Investor Relations, Apr. 23, 2012. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/577/3rd-generation-intel-core-processors-bring-exciting
Free wellness and health screening event at Lealman Exchange on Saturday Sept. 26
Lealman Exchange hosts free health and wellness event
Banner Health plans major expansion of Fort Collins Medical Center
Banner Health plans a major expansion of its Fort Collins hospital to add beds and new patient services.
New Chapter of Care Opens in Pleasanton
By Joy Jernigan, Vitals contributor Sutter Health leaders, colleagues, and elected officials gathered Sept. 17 to celebrate the opening of the new Pleasanton Care Complex, an important milestone in Sutter Health’s commitment to expand access to care in the Tri-Valley area. The celebration recognized the many people whose vision, expertise and collaboration helped transform this […]
ACSH in the media: British Medical Journal, RealClearScience (and Health), plus more podcasts
From a weedkiller paper that cannot carry the weight of its headline to a PFAS rule that treats cookware like a biohazard, we've been busy. Here’s a look at some of our recent media appearances, including in the British Medical Journal (BMJ), RealClearHealth, RealClearScience, SacTown Talks and the Health Policy Podcast.
Colorado health insurance prices poised for another big jump in 2027
Colorado health insurance prices poised for another big jump in 2027. State and federal subsidies, though, will blunt the price increases for people with lower incomes. Prices for coverage next year will increase by an average of 10% across the state and by even more for those who live in the mountains or on the Western Slope.
UT Health San Antonio ranks on Forbes list of ‘America’s Best Employers for Healthcare Professionals 2026’
UT Health San Antonio, the academic health center and health system of The University of Texas at San Antonio, has been named one of America’s Best Employers for Healthcare Professionals 2026 by Forbes, earning a place among just 250 healthcare organizations nationwide recognized for creating strong workplace environments for healthcare professionals. The national recognition, […]
Is metascience being co-opted?
In July, the White House released a report that argued academia is deeply dysfunctional and in need of radical reform.Science: A New Golden Age sets out a litany of problems many academics will recognise: interminable waits for grants; short-term funding rather than support for longer, more ambitious projects; ballooning administrative requirements; pressure to publish, and many more. “The scientific machine is getting bogged down,” it says. At least on the face of it, Science: A New Golden Age is a triumph for the metascience movement, a loose-knit, global group of academics, philanthropists and think tankers that want far more testing and experimentation in how we fund public research and innovation. The report tells US research funders to set up internal metascience units to do just this. But it has also set alarm bells ringing that metascience is being conveniently deployed to help justify the defunding of US universities, which US vice president JD Vance has openly labelled “the enemy.” “Just because you have an issue with your plumbing in your house doesn't mean you light the entire house on fire and burn it to the ground,” said Colette Delawalla, chief executive of Stand Up for Science, a group campaigning against what it says are attacks on scientists by the Trump administration. No one is arguing that academia doesn’t need reform, but there’s debate over how far and how fast the system should be shaken up. Does public R&D need slow and steady evidence-based adjustment, or radical new experiments?One of the key arguments in Science: A New Golden Age is that there’s not enough funding for what it calls “mid-level” science: engineering-heavy projects that require tens of millions of dollars, involve ten to a hundred people, and last around five years. Such a project might develop a brain-computer interface for people with Alzheimer's disease, for example. As such, the US National Science Foundation (NSF) has already announced $1.5 billion to set up so-called X-Labs, effectively new research organisations to pursue breakthroughs in areas such as quantum sensing and new scientific instruments. Funding divertedBut there’s a catch: this money has squeezed NSF budgets for more traditional, fundamental research grants, Science reported in June, likely meaning less cash for university-based scientists. Science: A New Golden Age also makes various swipes at universities, accusing them of extracting overheads from scientists to fund administrative bloat. “We have become dependent on a narrow set of legacy institutions,” it says. The report doesn’t mention it, but the US government is simultaneously seeking greater powers over federal funding, which would allow political appointees at funding agencies to screen or cancel research grants mid-project. The White House is also seeking to slash the NSF’s budget by more than half in 2027, although similar cuts proposed for 2026 were blocked by Congress. Convenient hookThis has worried some that the metascience agenda could be misused as a kind of smokescreen to further weaken universities. James Wilsdon, executive director of the Research on Research Institute at University College London, said that the report contains lots of “interesting ideas” and agrees that in places, academia is a “pretty broken system.” But the risk is that metascience is being deployed as a “convenient hook” to support cuts and a “political land grab” to transfer grant power from scientists to political appointees in US funding agencies.So far, the metascience agenda hasn’t been seized on by radical right parties in Europe. But Wilsdon worries it will cross the Atlantic, politicising research reform efforts and making them more difficult to carry out. The report is already making some in Europe sceptical of the entire idea. “The system is not without flaws, but the metascience discussion is not likely to improve the system but rather to generate munition to undermine it,” said Claes de Vreese, a professor of AI and society at the University of Amsterdam. Peter Thiel protégéOfficially, Science: A New Golden Age has just one named author: Michael Kratsios, the director of the Office of Science and Technology Policy and a former chief of staff to Silicon Valley mogul Peter Thiel. He also served as chief financial officer of Thiel’s Clarium Capital Management. Since the 1990s, Thiel has criticised US universities for moving away from teaching what he views as the classic works of western civilisation, and drifting towards “anti-Western zealotry.” And since 2011, he has offered two-year fellowships of $250,000 to young people to skip or drop out of university, and instead start companies or pursue scientific research. “College can be good for learning about what’s been done before, but it can also discourage you from doing something new,” according to the Thiel Fellowships website. In other areas, the Trump administration has promoted academics with a longstanding interest in metascience. For example, the head of the National Institutes of Health, Jay Bhattacharya, in 2020 co-authored a study arguing the funder backs overly conservative proposals, although he achieved wider prominence as a critic of pandemic lockdowns. Careless talk costs fundingEven before the Trump administration embraced the metascience agenda, some metascientists privately wondered whether they should be careful not to overstate dysfunctions in academia, in case this gets used as ammunition against universities. But others think being cautious with criticism is pointless. After all, last year, the Trump administration sought to cut funding from US universities on an entirely different premise: supposed antisemitism on campus. “I don't think these governments need a technical metascientific excuse to attack the universities, they will want to do so anyway,” said Will Stone, a researcher at Science Works, a new think tank advocating for a “metascience revolution” in the UK. “I think researchers should report what they find, even when the findings may be used to advance policies they disagree with,” echoed Russell Funk, a researcher at the University of Minnesota, who in 2023 co-authored a highly influential paper that argued scientific papers were becoming less disruptive over time. No justificationThat said, Funk thinks that metascientific research certainly doesn’t justify a weakening of universities. Instead, scientists need “time, resources and stability to pursue unfamiliar ideas,” he said. “Taking away those conditions works against the very goal the reforms are supposed to achieve.”The Institute for Progress, a Washington DC-based innovation policy think tank that has championed X-Labs and metascience units, also says that reforms should complement, not supplant, universities. “Unpredictable, unreliable, and reduced federal funding to researchers is destabilising to the very foundations of research and development and is bad,” said Jenn Gustetic, the institute’s director of metascience and R&D policy.Evolution or revolution?This points to a much bigger divide in the metascience community: how far and how fast should public R&D be shaken up? Does it need evolution or revolution? For example, Science: A New Golden Age says the science system relies too heavily on traditional “workhorse” project grants, the type that pay out around $250,000 a year to fund “hypothesis-driven science by small teams on tractable questions.” However, in criticising project grants, the report “decisively picks one side of a debate that is far from settled,” David Hilmer Rex, a metascientist based in Denmark, has written. In June, Pierre Azoulay, a metascientist at the Massachusetts Institute of Technology, defended project grants, saying that the alternative of X-Labs “merits scepticism.”A-B testingOne challenge in metascience is that it’s easier to generate evidence for some types of change than others. Most straightforwardly, research funders can run A-B tests on different ways of awarding money. For example, Germany’s Volkswagen Foundation recently trialled distributed peer review, where applicants rate each other’s proposals, and measured its results against traditional review panels. Distributed peer review made quicker decisions, although awarded money to largely different ideas. However, much of the focus of the metascience movement has been on founding fast-moving and free-acting new research organisations and funders, in contrast to the alleged stodginess of mainstream academia or public innovation grants. A culture of speed and freedom are the animating principles behind Germany’s Sprind or the UK’s Advanced Research and Invention Agency (Aria).Related articlesViewpoint: it's time to experiment with how Europe funds science European researchers sound the alarm that Trump rule changes will hit cooperationHowever, while it’s possible to closely study previously successful bodies, such as the US Defense Advanced Research Projects Agency (Darpa), for historical clues to their secret sauce, it’s impossible to guarantee in advance that the likes of Sprind or Aria will actually work as hoped. But advocates of new organisations say this inherent uncertainly shouldn’t stop us trying. “If we wait for definitive proof that something will work before we try it, I don't know where your proof is coming from,” said Stone. Trade-offsUp until now, experiments in metascience haven’t generally come with hard trade-offs over money. In the US, new ideas such as focused research organisations have often been funded by billionaire philanthropists. In Europe, new innovation agencies such as Sprind and Aria, or the Netherland’s new National Agency for Disruptive Innovation, haven’t needed explicit cuts elsewhere in the research system. But with the $1.5 billion establishment of X-Labs by the NSF, the trade-offs are becoming clearer. Some metascientists privately wonder whether a smaller pilot would have been more appropriate, given that the idea is untested. The Institute for Progress counters that the $1.5 billion X-Labs budget is spread out over a decade, so will account for less than 2% of the NSF’s annual budget. “It’s important to remember that [Darpa] was once an institutional experiment as well. Now it’s one of the most cited innovative funding models in the world,” said Gustetic.As for Europe?The US isn’t the only country placing metascience at the heart of its research strategy. Science: A New Golden Age looks admiringly at the UK, which in 2024 set up a Metascience Unit to scrutinise how it funds research. In Brussels, it’s more of a mixed picture. In 2018, the EU set up the European Innovation Council to funnel grants and equity to start-ups, although it’s sometimes criticised for awarding money too slowly. Recently, the council has started experimenting with challenges, where teams of inventors compete to overcome a technological challenge. The European Commission also wants to experiment with partially randomising grant winners, to cut down on bureaucracy. However, the Commission’s own advisers have said the EU’s own research schemes are too conventional. They want the Commission to establish a new dedicated unit to scrutinise and experiment with funding. But there’s no sign of a such unit emerging in Brussels’ plans for the next Horizon Europe programme, which from 2028 is set to distribute more than €160 billion over seven years. Sam Bogerd, director of breakthrough innovation at the Brussels-based Arq Foundation, an AI-focused think tank that also looks at metascience, says that Europe might have the opposite problem to the US: universities and basic research funding are still reasonably well supported, but there’s not enough experimentation. “We're not taking a close enough look at where this money can achieve the most, and I am worried that the good ideas around metascience will be tainted politically by their association with the Trump administration,” he said. He’s still lobbying for the Commission to set up an experimental unit. But in the meantime, the Arq Foundation plans to do its own research, and is currently hiring two metascience researchers to run the rule over how Brussels spends research funding.
Fall has officially arrived. Here's what to know about the autumnal equinox
At 8:05 p.m. Eastern time Tuesday, the sun will be directly overhead at the equator.
Patrik Schick’s Hot Streak Interrupted By International Break
The Czech striker has evolved into a vocal leader, matching historic scoring records while spearheading Leverkusen’s resurgence before national duty stalls his clinical momentum in the Bundesliga.
Birds on the Move: Awe at the Wonders Overhead
Migrating birds like geese and ibises often fly in a V formation. It’s a memorable sight for birdwatchers looking up into the sky.
Opinion | A first responder’s response: Riverhead officials twisted my words for political gain
A retired FDNY firefighter who lost 12 members of his firehouse on 9/11 shares his perspective on a Riverhead Town Hall clash and calls for ethical local leadership.
Bobcat Company pledges $1M to Fargo Moorhead Science Museum
Plans for a regional science museum in Fargo received a major boost after Bobcat Company committed $1 million to the project, the Fargo Moorhead Science Museum announced Monday.
Fargo-Moorhead Science Museum receives $1M corporate investment
Bobcat Co. has committed $1 million in financial and in-kind support to help develop hands-on exhibits for the future Fargo-Moorhead Science Museum.
6 Insights We're Learning from Sleep Research That Could Change How You Age
Sleep isn’t just a time for rest. Growing evidence suggests it may be one of the most powerful factors influencing how well we age, affecting everything from brain health and memory to hospital recovery and long-term independence. For more than two decades, Dr. Katie Stone, a sleep researcher Sutter Health Research Institute, has helped advance […]
Women of Sutter Health: Shaping the Future of Medicine
The face of medicine is changing. Women now make up nearly 40% of practicing physicians in the United States, up from 26% in 2004 and comprise a majority of U.S. medical school students. At Sutter Health, women are helping shape the future of healthcare through research, specialized care and medical education — making a lasting […]
The Daily Mauling: 9/21/26
Kansas Jayhawks News Dillon Davis of SI writes about the disappointment in London this weekend The full basketball Big 12 conference schedule is out. What does KU’s slate look like? Through the Phog writes that Tate Nagy could be a bigger contributor to the team than we may have realized Links! A blind loggerhead sea […]
Parasites, often seen as villains, may help shape gut and metabolic health
Blastocystis has long been viewed mainly as a marker of parasitic infection. Emerging research suggests that its presence is not necessarily linked to disease, but may instead reflect greater microbial diversity and metabolic health in certain contexts.
iOS 27 Battery Drain & Overheating? Here’s How to Fix It
Fix iOS 27 battery drain and overheating by identifying power-hungry background processes. Check your battery usage by app to stop the excessive drain today.
Engrams Embedding Entendre: Codesign for Efficient DRAM/SSD Offloading
Engram extends standard token embeddings with learned multi-token lookups. Recurring local patterns retrieve vectors directly, reducing the need to reconstruct them through attention and feed-forward layers. With Engram model architecture optimization, it allows for lower HBM capacity to be needed for models at the same quality. This does not mean there won’t be an insane demand for HBM but it just means that model architecture will continue to innovate around constraints. This model architecture design is naturally codesigned for parameter offloading: each token accesses a few embedding rows whose addresses depend on token IDs, not hidden states. The runtime can prefetch those rows from host DRAM while earlier layers compute, keeping the table outside HBM without transferring entire weight matrices. Our Memory model contains our latest estimates of quarter by quarter HBM, DRAM, & NAND supply and demand. Offloading frees HBM for model weights and KV cache, potentially supporting larger batches or more concurrent sessions. When DRAM becomes the next constraint, NVMe offers another tier. Recommendation systems already cache frequently or recently accessed embedding rows in faster memory while backing colder rows with SSDs. After NVIDIA roadmap had to change due to massively despec’ing Rubin Ultra from 1024GB to now ~200GB of HBM per chip, model architecture optimizations like emgram maybe helpful. Our DeepSeek-V4.1-Flash configuration uses roughly 189 GiB of memory for Engram. We replace it with a memory-mapped (mmap) file and measure serving performance with offload to SSD. Later on in our report, we will show our Engram offloading experiments along with the official InferenceX agentic inference serving results on Engram models like DeepSeekv4.1 Flash across all 6 NVIDIA GPU SKUs along with MI355X. Unsurprisingly, the CUDA Moat is still mogging MI355X on the ultra popular DeepSeekV4.1 Flash model. We also show how even on high capacity HBM SKUs, offloading emgrams to DRAM could result in even better performance for most of the pareto than keeping the emgram in HBM. Our benchmark has been widely reproduced, validated and/or supported by almost every major buyer of compute from Google Cloud to Microsoft Azure to Oracle, to Meta and many more. Furthermore, it has the support of the ML community including from vLLM, LMCache, SGLang, PyTorch, Huggingface and the support of major labs like OpenAI, MiniMax, ZAI, Qwen, Moonshot Kimi, etc. Star the InferenceX GitHub repository if you find the open-source benchmark and data useful!. InferenceX is the only inference benchmark in the world to have TPUv7, Jalapeño, Nvidia Rubin NVL72, AMD, and soon, SambaNova and Trainium. Due to how realistic AgentX scenario is to real world agentic inference workloads, AMD has committed to collaborating on MI455X UALoE72 too. DeepSeek did not release the original paper’s two trained Engram models. We replicated its setup on fineweb-edu using the released code and training hyperparameters, at an estimated 6E18 FLOPs per run. We observed the same U-shape scaling: Engram improved performance over pure MoE baselines. We also reproduced DeepSeek’s results, where earlier-layer representations with Engram resembled those of later layers. Like the original Engram paper, it is possible to probe Engram’s gate scores to see what n-grams DeepSeek-V4.1-Flash makes the most use of. Our gate scan finds names, code fragments, relational phrasing, and boilerplate. These examples prioritize interesting-ness over gate strength. One unexpected result was Wright : Ace Attorney. These examples suggest learned memory optimizes the training objective, not a judgment of which facts deserve storage. Licenses, bibliography fragments, API scaffolding, and website furniture can provide prediction shortcuts, so the value of additional Engram capacity may depend on what survives data preparation. This does not show that table capacity is “wasted”: the evaluation-corpus scan establishes neither training exposure nor the capacity occupied by each category. For offloading, strong gates do not identify cache-hot rows. Low gates do not automatically save reads either: computing the gate requires the retrieved key and undoes the performance gain of a fused kernel. Skipping reads would require a separate usefulness predictor before retrieval. In the original paper’s inference-time ablation, factual-knowledge benchmarks retained just 29–44% of their original performance, while reading comprehension retained 81–93%. This is due to the training–inference mismatch. The resulting degradation therefore measures this trained model’s dependence on Engram, not the performance difference between models trained with and without it. In our ablations, suppressing Engram worsens token likelihood across all evaluated domains, especially encyclopedia text and several code corpora. Surprisingly, GSM8K accuracy stays within measured run-to-run variation and removing Engram has no effect. Engram is not a detachable dictionary beside an unchanged MoE. Removing it changes downstream features and expert selection. We tested whether rerouting hurts or compensates by holding tokens fixed in a teacher-forced experiment on CRUXEval, a code-reasoning benchmark of small Python functions where the model predicts a function’s output from its code and an input, and scoring the reference answer. Removing Engram raised answer loss from 0.2848 to 0.3093 bits/token. Forcing the ablated model to use the original Engram-on expert choices made it worse still, at 0.3375 bits/token. Rerouting partially compensates for the missing memory. Memory features and expert selection work together, rather than following a clean “memory stores facts; experts reason” division. On the same CRUXeval, removing Engram during either phase reduced accuracy and increased generated tokens; removing it throughout produced the largest changes. Keeping Engram for prefill leads to more correct answers than keeping for decode likely due to semantically richer KV cache transferred to decode workers, allowing it to mitigate some of the performance loss. Engram’s table is large, but each lookup is small. DeepSeek-V4.1-Flash requests 24 rows at each of two Engram layers, about 12.4 KiB per processed token position across the model, or 3.1 KiB per GPU when split across four GPUs. Currently as of Day 7 since Model Release, MI355X is still 2-4x worse performance per dollar compared to B200 even when normalized by Mi355X’s lower TCO. Our full total cost of ownership breakdown comes from our AI Cloud TCO Model along with monthly market surveys of over 100+ gpu clouds & gpu cloud customers. On the Day 0 release of DeepSeekv4.1 Flash, NVIDIA vLLM works out of the box with zero issues across all 6 SKUs: H100, H200, B200, B300, GB200, GB300! This was thanks to the amazing work by the NVIDIA & Interact teams! In comparison, AMD vLLM did not work on day 0 for DeepSeekv4.1 Flash.Source: SemiAnalysis InferenceX AMD’s vLLM documentation points to using vllm/vllm-openai-rocm:deepseekv41-flash-0909, but from hour 0 of the model release to hour 23, AMD has not publicly released the image. AMD claims, “SPEED IS THE MOAT,” yet it has still not released it by the 23rd hour. We wish that, going forward, the AMD team has a better process for hour 0 model releases. Eventually when they did publicly release for “day 0” image support, performance-wise, it is currently up to 14.8x worse perf per dollar than H200 and up to 42x worse perf per dollar than B200/B300. The power of the CUDA MOAT is NVIDIA’s collaboration with its massive 6 million-developer community ecosystem including most of the vLLM & SGLang & Tokenspeed maintainers which means that CUDA is optimized on day 0. Overall, AMD did make significant improvements but the performance per dollar is still currently 2-4x worse than B200. AgentX Engram DRAM Offloading Improving Performance The HBM and DRAM offload use the same GPU kernel to select and dequantize rows. With HBM, it reads GPU memory; with Unified Virtual Addressing (UVA), it reads pinned host memory directly. Both support full decode graphs. Moving the table into HBM accelerates only the sparse lookup, leaving decoder computation and communication unchanged, resulting in little overall benefit while consuming memory otherwise available to KV cache. Another benefit of Engram offloaded to DRAM which means you can reduce the communication overhead by using less HBM GPUs per replica. For example, when enabling Engram offloading on B300, we are able to switch from TP4 to now TP2 which improves the pareto curve by up to 1.6x. When iso-model quality, less HBM is required as the engrams could be offloaded to host DRAM. Thus HBM bandwidth matters way more than HBM capacity. For inference workloads where memory bandwidth matters the most, 4-hi HBM provides the best $/bandwidth and therefore lowest cost per token. If China continues to make more and more revolutionary model architecture innovations, soon it could potentially 0Hi HBM stacks. [ ](https://newsletter.semianalysis.com/p/long-live-the-short-king-why-4-hi) [ Long Live the Short King: Why 4-hi HBM Wins ](https://newsletter.semianalysis.com/p/long-live-the-short-king-why-4-hi) Myron Xie, Bryan Shan, and 3 others · Sep 13 [ Read full story ](https://newsletter.semianalysis.com/p/long-live-the-short-king-why-4-hi) Moreover, on B300 and week-0 stack, moving the Engram table back to HBM did not improve results and stay within run-to-run variance. This is a result of the work optimizing DRAM offload, such as async, and overlap. SSD Offloading On B200, we created a unoptimized vLLM fork and stored the Engram tables in memory-mapped files on local SSDs. File backing lets the OS reclaim table pages when other applications need RAM. Pages already cached in memory can be served without reading the SSD again. Furthermore, note that we were unable to turn on GDS The unoptimized SSD implementation changes how rows reach the GPU. It copies row IDs to the CPU, deduplicates them, gathers the requested rows into pinned buffers, copies those rows back to the GPU and dequantizes them. This work runs between segments of the GPU execution graph. Native UVA performs row selection and dequantization directly on the GPU, avoiding the CPU round trip. A warm filesystem cache removes physical SSD reads, but leaves the coordination, row gathering and transfers. This is why a file already cached in RAM can still perform worse than a pinned DRAM table. The comparison measures the whole serving path; it does not separate the time spent on each of these operations. B200 DRAM dominates both measured SSD serving curves in total tokens per dollar and P90 interactivity. Near 125 tokens/s/user, DRAM delivers 121 million total tokens per dollar versus 52 million for SSD. For production serving, SSD offloading is likely not worth the tradeoff. On the B200 configurations we measured, SSD offloading loses on both measures: every observed SSD point has a DRAM alternative that delivers higher P90 interactivity and more total tokens per dollar. The only points where Cheaper storage does not automatically produce a cheaper inference service. Moving Engram to SSD leaves the same four expensive GPUs and the rest of the server in place. Reclaiming RAM only creates an economic benefit if it enables a cheaper server configuration or additional useful capacity. The current unoptimized path provides neither benefit, and the filesystem cache still consumes RAM when table pages are resident. Next we will look at the mechanisms and specific implementation of ngrams from DeepSeekv4.1 Flash, LongCat, Qwen3.8 Flash Next.
Meet Notre Dame’s newest business faculty members - Notre Dame Business Mendoza College of Business
Mendoza welcomes a new cohort of scholars whose research shapes how the College teaches and thinks about today's business challenges.
Armor Health Expands Structured Approach to Women's Postpartum Mental Health in Correctional Settings
/PRNewswire/ -- Armor Health (ArmorHealthcare.com), a national provider of correctional healthcare, is expanding its distinct, structured approach to...
Adora Life Science Announces the Appointment of Dr. Clinton D. Morgan as Chief Medical Officer
Adora Life Science (Adora) today announced that Dr. Clinton D. Morgan, MD, will be joining Adora as its full-time Chief Medical Officer, effective November 1, 2026. Dr. Morgan has previously been appointed to Adora's Board of Directors and has been consulting part-time on human therapeutic opportunities, mechanism of action and development strategies. Dr. Morgan will spearhead Adora's human clinical development, regulatory strategy, and the company's scientific and research network.
Thunderbird pilots visit patients before taking to the skies
Before flying the famous Thunderbird jets overhead, a group of pilots visited with hospitalized children and veterans at Sanford Health.
Star Health FY26 Data Highlights How Young India is Driving the Digital Health Insurance Revolution
India's leading standalone health insurer, Star Health and Allied Insurance Company Limited (NSE: STARHEALTH) (BSE: 543412) today released its FY26 direct digital channel data showing that young, salaried Indians are increasingly choosing digital channels to buy higher-value health insurance covers.
What Comes Before Stomach Cancer? Researchers Are Finding Out.
Call it a “gut feeling.” For some stomach cancers, the first signs may appear years before a diagnosis. At Sutter Health Research Institute, Dr. Su-Ying Liang is helping lead that work. Through Gastroshare, she and researchers at Stanford University are using artificial intelligence and electronic health record data to study early changes in the stomach […]
Sutter Health and Presidio Trust Launch Partnership
Founding partnership creates new model for sustaining public spaces and advancing community health through nature Media can access downloadable photos, fact sheets and additional resources here. SAN FRANCISCO (Sept. 15, 2026) — As communities look for new ways to improve health, strengthen social connection and sustain treasured public spaces, not-for-profit health system Sutter Health and […]
Prospect Watch: Marlins Affiliate on Verge of Championship
The Jupiter Hammerheads sit one win away from Florida State League glory, while the Blue Wahoos prepare for postseason action behind a wave of surging power prospects.
Steve Carell, Keri Russell among actors who have never won acting Emmys
Emmy nominees Steve Carell, Jason Bateman, Keri Russell and Rhea Seehorn have earned critical praise throughout their careers but still haven't won an acting prize.
Unfinished Business: Star-Studded Moorhead Spuds Eye State Championship Run
Inside the weight room and across the practice turf at Jim Gotta Stadium, the energy surrounding the Moorhead Spuds football team carries a different edge this fall.
Unfinished Business: Star-Studded Moorhead Spuds Eye State Championship Run
recurring recording of Valley News Live at 10:00PM Sunday KX4 - VOD
Video Health officials declare the cyclosporiasis outbreak over
The parasite that sickened nearly 13,000 people in the U.S. was associated with contaminated lettuce and caused symptoms like diarrhea and nausea.
Armor Health Remembers September 11 and Reaffirms Commitment to Public Safety
/PRNewswire/ -- Twenty-five years after the attacks of September 11, 2001, Armor Health (Armorhealthcare.com) joins Americans across the country in remembering...
Spartanburg Regional Healthcare System receives Duke Endowment grant to support maternal and infant health
Spartanburg Regional Healthcare System has been awarded nearly $1.6 million from The Duke Endowment to participate in the Maternal Infa
Friends of Acadia’s Auction for Health & Hope
View this email in your browser Hello Friend, We are excited to announce our Auction for Health & Hope, hosted as part of our 25th anniversary celebrations. All proceeds will directly support Healthy Acadia’s vital community programs and resources. Mark your calendars to join us September 14-19. Bidding opens at 5 A.M. on Monday, September 14th and closes at 5 P.M. on Saturday, September 19th. This auction highlights the arts and experiences across our region and features themes of health & hope. We have received an abundance of donations from local artists and community members - thank you! All funds raised will support Healthy Acadia’s wide array of health programs and resources, helping to make health happen! We have a variety of items to bid on, including: a handcrafted bowl sculpted by Maria Chamber; a bird lover’s birding basket and membership; a $100 gift card to Union River Lobster Pot; Robert E. Goodier prints; a Cadillac Mountain painting by Roberta Sprague; a winter tulip CSA from Eden Street Flowers and so much more! View this email in your browser There is so much more to check out, and every winning bid helps those in our communities who need health supports the most. It is a win-win! For early viewing of the auction, please visit: **bit.ly/auctionforhealthandhope**If you have any questions, please email: **development@healthyacadia.org.**The auction will culminate on September 19th at our 25th Year Anniversary Celebration at TunkJoy Bakery in Steuben, where we’ll announce the winners live! We would love to see you there. If you haven’t RSVP’d yet, please click here. We are grateful for everyone’s support so far, and we are looking forward to celebrating our auction winners! With Gratitude,The Healthy Acadia Team Don’t want to bid, but want to donate? Click here. Subscribe Share Leave a comment
Riverhead’s top business official resigns four months after hiring
Colleen Card, hired as Riverhead’s assistant superintendent for business in May, has been appointed school business administrator by the Sag Harbor Union Free School District, effective Nov. 1.
Tower Health hospitals recognized by national publication
Reading and Phoenixville hospitals earn national recognition.
Prop 40 is dividing CA labor unions and experts argue the fight goes well beyond a billionaire tax
SEIU-United Healthcare Workers West is spearheading Proposition 40, arguing the tax is necessary to offset major federal health care cuts. But the opposition includes groups that have often found themselves politically aligned with organized labor, including the California Teachers Association, California Professional Firefighters and the State Building and Construction Trades Council of California.
Insurer markups only a small part of premium increases
Just cracking down on insurer overhead won't meaningfully bring down premiums.
Arsenal Predicted XI vs Napoli as Arteta Handed Injury Boost
Mikel Arteta faces a selection dilemma in Naples as key stars return. Discover how Bruno Guimaraes and Ebere Eze could spearhead a refreshed lineup seeking European redemption.
Vernon County Health Department targets vaccine hesitancy with new grant as measles cases emerge nearby
Sept 7, 2026 By TIM HUNDT VIROQUA Wis. – In a bid to combat dropping immunization rates and address a recent public health threat close to home, the Vernon County Board of Supervisors has approved a federal grant to fund a targeted vaccine education campaign. The decision comes as the county’s public health officials spearhead […]
Riverhead Town Board roundup: Town votes in favor of $1.95M offer to acquire the LI Science Center on East Main Street
The Riverhead Town Board voted to issue a $1.95 million appraisal offer to the Long Island Science Center for its East Main Street building in the downtown.
DeAPlaneta to Represent Iron Maiden, Backstreet Boys in Europe
The company will serve as licensing agent for Global Merchandising Services' roster in Iberia, France and Central and Eastern Europe.
Deaplaneta Entertainment Appointed as Licensing Agent for Global Merchandising Services’ Music in Iberia, France and CEE
The DeAPlaneta Entertainment portfolio has announced it has been bolstered by the addition of Iron Maiden, Evanescence, Motörhead, Ozzy Osbourne and Backstreet Boys. The company has reached an agreement with Global Merchandising Services for the former to act as the licensing agent for the artists in its catalogue in Iberia, France, and CEE. This appointment […]
Indian health activists lodge concerns about food warning proposal in court
Indian activists spearheading calls for food labelling said a government proposal to have red warnings only when two concerning nutrients are high created an "industry-friendly loophole" disregarding public health, marking the first formal court objection to the plan.
Indian health activists lodge concerns about food warning proposal in court
By Aditya Kalra NEW DELHI, Sept 7 (Reuters) - Indian activists spearheading calls for food labelling said a government proposal to have red warnings only when two concerning nutrients are high created an "industry-friendly loophole" disregarding public...
Indian health activists lodge concerns about food warning proposal in court
By Aditya KalraIndian activists spearheading calls for food labelling said a government proposal to have red warnings only when two concerning nutrients are high created an "industry-friendly loophole" disregarding public health, marking the first formal court objection to the plan.India's proposal…
Canaries draw Kansas City to open postseason play
MOORHEAD, MN (CANARIES) — The Sioux Falls Canaries are headed to the Miles Wolff Cup Playoffs for the fourth consecutive season and for the eighth time in franchise history. The Birds will open postseason play against West Division regular season champion Kansas City. The Canaries (50-49) will host the Monarchs (58-41) for Game 1 of […]
Cuba: US Embassy issues health alert due to GI pathogens like norovirus, Shigella
The US Embassy in Havana issued a health alert last week after seeing a significant increase in diarrheal illness across Cuba, associated with the continuing degradation of the water and energy infrastructure. This degradation affects water supply, and food storage and temperature control. Recent cases have included E. coli, norovirus, Shigella, and other gastrointestinal pathogens. This comes after a health alert dated August 28 which noted that Cuba’s water delivery infrastructure is increasingly unstable. The Embassy is aware of reports of residential neighborhoods that have gone for long periods without receiving water from municipal or public sources. Dengue cases surge in the Tampa Bay area Prolonged and worsening water issues and power outages caused by the regime’s mismanagement of public infrastructure impact the entire island. Water often only flows to residences when city power is on for a sufficient amount of time. Media reports indicate wells are running dry across the country due to drought, aggravating the ability to supplement water delivery. The lack of water, coupled with power shortages that have disrupted cold chain networks, can present significant health and safety challenges. We remind U.S. citizens to be aware of the risks when traveling to Cuba and take precautions. Embassy officials offer the following precautions to prevent illnesses: Avoiding Foodborne Illness: Be cautious of meat, poultry, seafood, eggs, dairy, and other perishable foods that may have been inadequately stored. Avoid foods that appear to have been sitting at room temperature for extended periods. Avoid raw or improperly washed vegetables. Be cautious of food cooked and then cooled, stored, or reheated, as improper temperature control can allow pathogens or toxins to develop. Wash hands thoroughly with soap and water before eating and after using the restroom. Hand sanitizer may be less effective against certain gastrointestinal pathogens, including norovirus. Outbreak News Today is a reader-supported publication. To receive new posts and support my work, consider becoming a free or paid subscriber. Subscribe Water Safety: Use only water known to be safe for drinking, brushing teeth, making ice, and cooking. Use bottled or appropriately treated water; check that bottle seals are intact before opening. Avoid ice unless the water source is known to be safe. Do not use untreated tap water to prepare beverages or food. Be aware that contamination can occur when food, utensils, and surfaces are washed with contaminated water. If You Become Ill: Stay hydrated, especially with frequent diarrhea or vomiting. Most illnesses are self-limited and improve within several days. Seek medical attention for persistent or severe diarrhea, bloody stools, high fever, significant abdominal pain, repeated vomiting, signs of dehydration, or symptoms not improving. Common medications (e.g., acetaminophen, ibuprofen, antibiotics) are frequently unavailable in Cuba; consider bringing your own supply. If you like the reporting on Outbreak News Today, please consider a paid subscription for $5/month or $30 a year. Help support the cause of this niche journalism. It is appreciated.
Riverhead closer to taking over Long Island Science Center property
The vacant department store, officials said, threatens Riverhead's town square project.