SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " Finish " 1,217 found 🔀 AI-powered Shuffle
Shawn Levy Signs Overall TV Deal at Disney
The producer and director, who recently finished the next 'Star Wars' film for Disney, has been based at Netflix since 2017.
Detroit Pistons: 3 Questions Heading Into Training Camp
Despite finishing as the top seed in the East during the regular season, the Detroit Pistons have quite a few questions heading into the 2026-27 campaign
Global benchmarks are mixed despite Wall Street's rally finish last week
Global shares are trading mixed Monday after a cooldown in oil prices last week helped U.S. stock close out their first winning week in the last three. Benchmarks are rising
Asian benchmarks are mixed despite Wall Street's rally finish last week
Asian shares are trading mixed Monday after a cooldown in oil prices last week helped U.S. stock close out their first winning week in the last three. Benchmarks rose in
Asian benchmarks are mixed despite Wall Street's rally finish last week
Asian shares are trading mixed Monday after a cooldown in oil prices last week helped U.S. stock close out their first winning week in the last three. Benchmarks rose in
Mark Andrews held in check
Baltimore Ravens TE Mark Andrews finishes with three receptions in Week 3
Glamorgan welcome best ever Division One finish
Glamorgan captain Kiran Carlson says the team "would have bitten your hand off" at the start of the year to finish sixth in the Championship's top flight.
Zay Flowers sharp in return
Baltimore Ravens WR Zay Flowers finishes with 84 yards against Dallas
Mack Hollins leads Patriots in Week 3 with six grabs
Mack Hollins finishes with six catches for 87 yards in Week 3 against Jacksonville.
Quentin Johnston finishes with 40 yards
Los Angeles Chargers WR Quentin Johnston snags three passes in Week 3
Wan'Dale Robinson scores TD vs. old team
Tennessee Titans wide receiver Wan'Dale Robinson finished seven receptions for 57 yards and a touchdown on a game-high 11 targets in Week 3
Dan Wilson out as Seattle Mariners manager
Dan Wilson will not return as the Seattle Mariners' manager next season, he and the team said Sunday. Wilson made the announcement shortly after the Mariners finished off a 7-3 win over the Los Angeles Angels, the ending to a disappointing 76-86 season that began with World Series hopes after the Mariners made it to Game 7 of the ALCS last season. “Collectively we failed to meet our own expectations this season,” Mariners President of Baseball Operations Jerry Dipoto said in a statement.
Daniel Jones throws one TD, one INT in Week 3
Colts QB Daniel Jones finishes with 235 yards and TD but turned ball over three times
How Orioles’ Postponement News Hurts Pete Alonso
The Baltimore Orioles were supposed to finish their 2026 MLB season on Sunday in Yankee Stadium. Turns out, they won’t get the chance to do that. And Pete Alonso won’t get the chance to ensure himself a special first season in Baltimore. The news came about 4 p.m. ET on Sunday that the Yankees-Orioles game […] The post How Orioles’ Postponement News Hurts Pete Alonso appeared first on HEAVY.
MLB playoffs 2026 tracker: Astros win AL West, Phillies hang on for wild card — final playoff bracket, seeding and postseason schedule after MLB finish
Max Scherzer Gets A Win To Finish The Season
Reds 1 Blue Jays 5 If I were Max Scherzer, that’s how I’d want to end my career. He threw seven innings, allowed six hits, one earned run, one walk, and seven strikeouts (which would finish him with 3,557 strikeouts, three fewer than Justin Verlander). Max threw 114 pitches. That’s just amazing, especially on short […]
SDSU Weed Science Teams Compete in First-ever Contest, Graduate Team Finishes Second
BROOKINGS, S.D. -- The South Dakota State University Weed Science graduate team placed second in the Western Society of Weed Science category at the North...
Yankees’ regular season finale against Orioles cancelled due to rain
We’ll finish the regular season with just 161 games played.
Jimmy Butler and Draymond Green Could Reportedly Retire With Warriors
Stephen Curry's new extension settled one big question in Golden State, and a new report says two other veterans want to finish their careers there too.
Ghosts of Drumcree wakened as questions loom over Stormont's future
We are again reminded of the unfinished business of that peace and of roads yet to travel, writes Brian Rowan.
Team Gives Latest Health Update on UFC Fighter Raoni Barcelos
The team of UFC fighter Raoni Barcelos gave the latest health update on their fighter following a frightening scene at UFC Vegas 121.The main event of UFC Vegas 121 ended with a scary situation when Barcelos was finished via fifth-round TKO by Raul Rosas Jr. after a gruelling five-round war that left both men bloodied […] The post Team Gives Latest Health Update on UFC Fighter Raoni Barcelos appeared first on HEAVY.
UFC Vegas 121 Bonuses Revealed After Upset-Filled Card
Following an upset-filled card, the post-fight bonuses for UFC Vegas 121 were revealed following the event. There were 12 UFC fights on the card, with eight finishes. Check out the bonus winners below. Fight of the Night ($100,000 to each fighter): Raul Rosas Jr. vs. Raoni Barcelos In the main event, Raul Rosas Jr. defeated […] The post UFC Vegas 121 Bonuses Revealed After Upset-Filled Card appeared first on HEAVY.
Kohli has 'unfinished business' at his 'last World Cup' in 2027
"My dream is to play a match-winning, finishing knock in the finals, like chasing a score - that's the ideal scenario," Virat Kohli says about the perfect sign-off | ESPN.com
Kohli has 'unfinished business' at his 'last World Cup' in 2027
"My dream is to play a match-winning, finishing knock in the finals, like chasing a score - that's the ideal scenario," Virat Kohli says about the perfect sign-off
Raoni Barcelos health update: UFC Vegas 121 headliner awake after terrifying fight finish
Some good news has emerged following a terrifying end to UFC Vegas 121. Raoni Barcelos was stretchered out of the Meta Apex in Las Vegas, Nevada, following a bizarre and downright terrifying finish to his main event fight against Raul Rosas Jr. tonight (Sat., Sept. 26, 2026). Thankfully, the first update on the 39-year-old Brazilian […]
THE GUARDIANS ARE YOUR AL CENTRAL CHAMPIONS!!!!!!!!
WHAT A GAME!!! WHAT A SEASON!!! The offense has completely bailed out the pitching staff the last couple weeks, and tonight was no different. We got contributions from just about everyone. Multi HR games from both Patrick Bailey and Brayan Rocchio is just a hilariously beautiful way to finish the regular season. We also saw […]
Anthony Elanga, A Player Reborn at Newcastle Under Matthias Jaissle
Thriving within a high-intensity system, the Swedish winger has traded inconsistency for clinical finishing to become the explosive focal point of the Magpies’ revitalized attacking frontline.
What will make this Red Sox season a success?
A season ago, the Red Sox finished third in the American League East, winning 89 games. This season, depending on the result of a final game at Tropicana Field against the Chicago Cubs (a real sentence), the team will win 87 or 88 games. Last year, Boston was the 5-seed playing at the New York […]
Intel Panther Lake Teardown, 18A, BSPD, GAAFET, SemiAnalysis STEEL
Panther Lake debuts the first commercial implementation of backside power delivery (BSPDN), introduces Intel’s first iteration of gate-all-around (GAA) transistors, and showcases their advanced packaging capabilities with its Foveros-S assembly. With Panther Lake, Intel’s manufacturing arc has shifted from nebulous roadmaps to shipped silicon, a significant milestone on their long road back to competitive semiconductor manufacturing. To evaluate the extent of Intel’s comeback, we tore down Panther Lake. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Our teardown traces 18A from its four-sheet RibbonFETs (Intel’s marketing name for GAAFETs) and gate stacks through contacts, frontside and backside wiring, and the bonded carrier. We explain how these material and integration choices improve gate control and reduce resistance, while adding capacitance, thermal resistance, and process complexity. Our measurements put Panther Lake’s 18A compute logic and TSMC N3E GPU logic at similar logic density. However, 18A does not lead TSMC N3P, N2 or Samsung SF2 in peak density. Panther Lake’s CPU cores are incremental updates, and the high-end GPU still uses TSMC N3E. Panther Lake assembles one compute tile, one GPU tile, and one I/O tile atop a passive base tile using Intel’s Foveros-S advanced packaging. Both compute tile variants use Intel 18A. The Xe3 GPU options are a 4-core GT1 tile on Intel 3 and a larger 12-core GT2 tile on TSMC N3E. Both I/O tile variants use TSMC N6. [1], [2] Our analysis centers on the PTL-U compute tile, both the 4-core and 12-core GPU tiles, as well as the 12-lane I/O tile. In conventional chips, power and signal are routed through the same frontside metal stack towards the device frontend. Power rails consume scarce routing resources near the transistors, while tall via stacks carry VDD and VSS from the coarse upper wires to local rails. Backside power delivery (BSPD) moves the main power network behind the transistor layer, to the backside, separating it from frontside signal routing. We covered BSPD and its impacts in 2024. [3], [4], [5] Intel’s BSPD implementation, branded as “PowerVia”, routes power through dedicated backside metals to nano-TSVs, which connect those rails to local source/drain (S/D) contacts. Implementing that separation requires Intel to build the interconnect stacks from both sides of the wafer. The frontside comprises the M0-M14 signal stack, while the backside comprises the BM0-BM5 power stack. M0 and BM0 are closest to the transistors. The nano-TSVs connect the two sides, but Intel patterns and etches each via from the front after forming the contacts. A narrow via runs from the side of the contact deep into the silicon substrate. Intel then completes the frontside signal metal stack, bonds the wafer to a carrier, flips it and removes the original substrate until the buried via tips are exposed. The backside metal stack is then deposited directly on the revealed vias. The nano-TSV and backside-via profiles taper in opposite directions because Intel forms them from opposite sides of the wafer. The transistor structures form the FEOL. Local contacts and nano-TSVs connect them to the wiring. M0 begins the frontside interconnect stack. The silicon carrier remains attached above the frontside interconnects. It supports the device wafer during substrate removal and backside processing and remains part of the finished chip’s thermal path. PowerVia removes the main power distribution from the congested frontside metals, routing supply through shorter and wider backside wires. Its lateral landing still occupies area in the standard cell, so it recovers less cell area than a direct backside contact. [3] Nano-TSVs beside the logic devices carry VDD or VSS from the backside power network, while signal connections continue upward through the frontside metals. Backside Interconnects Samsung SF2 data is included for comparison to Panther Lake’s within this article. SF2 is the incumbent GAA foundry node but lacks BSPD, serving as a useful reference to evaluate 18A. A full teardown of Samsung’s S26 products, processed on SF2, will be shared soon.Nanosheet-cut EDS comparison. The PowerVia supply path runs from the backside Cu rails through Mo-lined W nano-TSVs to the local transistor contacts. In this cross section, the tapered connection spans roughly 150 nm from the contact level to BM0. The Ta liner confines Cu and promotes adhesion to the surrounding stack; the AlOₓ etch stop controls the next dielectric etch above the rail. Dielectric beneath the ribbons electrically separates the devices from the backside wiring and removes the conducting silicon body below the channel. [6] AlOₓ serves as an etchstop (ES), enabling endpointing and protecting the underlying layers. Low-volatility aluminum fluoride reaction products resist the fluorinated plasma, allowing a thin AlOₓ film to protect the metal while the surrounding low-k dielectric is removed. [6], [7]. While the BM0 and layers above the M1 lines show double AlOx layers, Our SMIC N+3 teardown showed single AlOₓ layers. SMIC uses a simpler local AlOₓ substack, while the remaining cap and etch sequence provide the required landing protection. So why double layers? The closely spaced AlOₓ doublets provide two protected endpoints in the etch sequence. Intel documents an AlOₓ/SiN/AlOₓ stack that explains the benefit. The main dielectric plasma etch stops on the first AlOₓ film; a selective wet clear opens that film; a second plasma etch removes the intermediate SiN and stops on the second AlOₓ film. The final wet clear exposes the metal landing surface. SiN is the intermediate dielectric in Intel’s published example. [8] The second stop protects the metal through a cap breakthrough. Wide openings can etch faster than narrow ones, and etch depth varies across the wafer. Metal under an early-clearing opening would otherwise be exposed while other openings still need more etching. Staged protection widens the process window and reduces metal erosion, corrosion and void formation. [8] TSMC documents AlN/AlOₓ/SiOC/AlOₓ above Cu, with AlN blocking Cu diffusion, and a simpler AlN/SiOC/AlOₓ variant that omits one AlOx film. [9] Levels with different opening sizes, aspect ratios, pattern densities and cap materials need different etch margins. A double AlOx stop is useful where another protected endpoint justifies the added processing. The extra film adds formation, selective opening and cleaning steps, plus another set of interfaces to control adhesion, moisture, and stress. These blanket films are opened through the existing via pattern, so each film does not require another lithography mask. AlOₓ adds parasitic capacitance when it replaces lower-k dielectric; two thin AlOₓ films can nevertheless contain less AlOₓ than one thick film. Total thickness, placement, and theintermediate dielectric determine the electrical cost. Deposition chemistry also changes AlOx permittivity and residual hydroxyl content, which can oxidize the underlying metal. [7], [8], [10], [11] The backside stack separates into relatively fine BM0-BM2 wiring near the devices and coarser BM3-BM5 power distribution. The largest pitch increase occurs between BM2 and BM3. BM0’s pitch closely matches the logic-row height, fitting local power delivery to the cell rows. Higher levels aggregate current through larger conductors: routing density becomes less important than low resistance and current capacity as the network approaches the package. This hierarchy provides wide power wiring for the power delivery network without consuming scarce frontside signal-routing resources. [3] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Frontside Interconnects Intel 18A combines Mo-lined W contacts and nano-TSVs with a separate backside Cu power network. Samsung SF2 keeps power on the frontside, using Ti-based contact interfaces and Ta-based barriers and Co liners around Cu wiring. In 18A standard-cell rows, backside power rails supply the devices through nano-TSVs within the cells, freeing frontside routing resources. Samsung’s M0 accommodates both power and signal connections. From the device toward M0, the connection runs through a Ti-based S/D interface, W contact fill, a Mo-lined W via, and the Cu M0 wire. Mo supplies a conductive nucleation and adhesion layer for W, replacing the resistive TiN liner used in conventional W integration. This increases the effective conduction volume within the feature while retaining W fill and its established polishing, cleaning and etching processes. Intel’s Mo/W patent describes this integration tradeoff. The nano-TSV uses the same Mo-lined W construction in the backside supply path. [12] The move from TiN to Mo is an incremental change. While a full Co or Mo fill can also reduce the volume lost to liners in very small features, it requires new integration schemes that increase complexity and risk. Cu remains attractive for wider wires due to its low resistance. As wires and vias shrink, the diffusion barrier consumes an increasing fraction of their cross-section. [12], [12], [14] Intel uses Co/Ru liners at M0-M1, Co at M2-M4, and Nb at M5-M9. The lower-level liners help Cu adhere and reduce void formation during trench fills. Applied Materials’ Endura has new thermal control that facilitate wetting process, so the thin film continuity is good enough that good capillary pressure will drive Cu atoms to the via bottom without voiding. Intel’s choice to use Nb is particularly interesting. Intel’s Nb patent describes a conductive diffusion barrier intended to reduce the barrier’s contribution to resistance relative to conventional Ta-based barriers, particularly at via bottoms where all current crosses the barrier. The patent pairs Nb in coarser levels with the option of lower-cost PVD processing. [15], [16] The upper metal layers support thicker barriers formed through physical vapor deposition (PVD) despite its worse coverage and uniformity. Meanwhile, the lower metal layers require thinner barriers deposited through conformal atomic layer deposition (ALD). Co/Ru adds another material interface and requires controlled deposition and Cu fill. Changing liners and barriers by metal layer allows Intel to optimize interconnect resistance, process complexity, and reliability. [15, 16] RibbonFET, Intel’s name for its gate-all-around FETs (GAAFETs), replaces the FinFET’s vertical fins with four stacked horizontal silicon nanosheets, allowing the gate to surround the channel on every side. The path to GAAFET begins with the planar transistor. A planar MOSFET places the gate above the channel between its source and drain. Pairing an NMOS with a PMOS transistor creates a CMOS inverter, in which the NMOS pulls the output low for a high input, and the PMOS pulls it high for a low input. The gate must retain electrostatic control of the channel to ensure clean switching. As gate lengths shrank, the drain began to compete with the gate for that control, increasing off-state leakage. Electrostatic control was restored through an architectural evolution that raised the channel into a vertical fin and wrapping the gate around three sides. Called “FinFET”, this new architecture packed more effective channel width into a smaller footprint. Further scaling made it harder to maintain both drive current and leakage within smaller cells, and reintroduced the same problems planar MOSFETs faced. Nanosheet GAAFETs close the fourth side by replacing the vertical fin with a stack of horizontal nanosheets, each surrounded by the gate. The tighter electrostatic control suppresses leakage at shorter gate lengths while stacking adds effective channel width within the cell footprint. In a FinFET process, channel width changes in discrete steps as designers must add or remove whole fins. Nanosheet width can instead be adjusted continuously within the process’s design rules. Wider sheets increase drive current, while narrower sheets reduce capacitance at the cost of drive current. Intel 18A uses stacks of four nanosheets each and varies their widths across logic and SRAM. At the process level, adding more sheets to each stack increases effective channel width and drive current, but complicates fabrication. RibbonFET vs MBCFET Samsung began GAAFET production in 2022 with SF3E, following with SF3 and now SF2. Its ‘MBCFET’ provides a useful structural comparison with Intel’s first RibbonFET implementation. [17] STEEL is digging deeper into SF2, used in the Exynos 2600, and TSMC’s GAAFET N2, used in Apple’s A20 Pro, in upcoming newsletter articles. We’re throwing some teasers on X. Let’s compare Samsung SF2’s MBCFET with Intel 18A’s RibbonFET. Subscribe Even to the untrained eye, Intel’s extra nanosheet is obvious. Intel stacks four ribbons to Samsung’s three. Samsung’s sheets are much wider in these fields, so both sheet count and width matter to the available channel perimeter. Sheet width also changes which silicon surfaces carry current. On conventional (001) silicon, wide nanosheets emphasize the broad top and bottom surfaces, favoring electron transport; the larger sidewall contribution in a narrow sheet favors hole transport. Thinner sheets improve gate control but increase confinement and scattering. This makes width and thickness part of the NMOS/PMOS balance, alongside strain and threshold voltage. [18], [19] GAAFET designs like 18A use different work-function-metal (WFM) stacks for NMOS and PMOS. Around each ribbon, a thin SiOx interfacial layer separates the silicon channel from the HfOx high-k dielectric, with La providing dipole tuning and the WFM wrapping the dielectric. NMOS uses a TiAl-based stack, while PMOS uses TiN WFM. W fills the remaining gate trench, providing a lower-resistivity path where the work-function layers are no longer needed. In this field, the PMOS stacks leave room for W between ribbons, while the NMOS stacks occupy more of those gaps. A silicon-based dielectric marks the P/N boundary, allowing the PMOS and NMOS gates, sharing the same gate trench, to be processed sequentially. Fast logic paths, retention circuits, and SRAM need a family of threshold options. Changing threshold without substantially changing device dimensions, capacitance or fabrication complexity is valuable. FinFET processes typically use different work-function-metal stacks. In a four-ribbon GAA stack, the narrow sheet-to-sheet gap limits how much WFM can fit around each channel. La in the gate dielectric creates interfacial dipoles at the SiOx/HfOx boundary, shifting effective work function and tuning threshold voltage. This gives Intel another control alongside its NMOS and PMOS WFM stacks. Low-threshold devices improve critical-path drive; higher thresholds reduce leakage elsewhere. Dipole tuning is especially useful in GAA because it changes threshold without consuming the narrow intersheet gap with thicker WFM. Precise control of La incorporation, diffusion and interface quality has long been a challenge, limiting viability in high volume production but is now seen from every leading-edge foundry. Intel’s patent describes depositing a dipole-forming oxide above HfOx and annealing it toward the interfacial oxide before completing the work-function and fill metals. This separates threshold tuning from the space available for metal. Newer research addresses the thermal cost: imec’s 2026 dipole-middle research inserts the shifter between two HfOx depositions, shortening the diffusion path while protecting SiOx during patterning. [20], [21]Matched-cut EDS, Intel 18A (left) vs. Samsung SF2 (right). Intel retains raised source/drain epi beneath its contacts, while Samsung recesses W deep into the epi to form a V-shaped Ti-lined interface. The deeper contact increases metal-to-semiconductor area and shortens the current path from the lower sheets, reducing contact and spreading resistance. It also removes epi volume and brings the contact etch closer to the channel ends. Retaining more epi preserves the material available for strain transfer, especially from SiGe into PMOS. These geometries balance contact access against stress engineering and etch margin. [22], [23] Samsung stacks three sheets to Intel’s four ribbons, and both processes use sheet width to tune drive strength. In our Samsung cross-sections, widths range roughly from 19 to 30 nm in the NPU rows and 37 to 50 nm in the CU cell. The Samsung nanosheets taper, with the widest sheet at the bottom and the narrowest at the top. Both processes use HfOx gate dielectric and Ti-based work-function stacks, with Al in the NMOS stack. In the Samsung devices shown here, the dielectric and WFM occupy the intersheet gaps, leaving W above the top sheet. Intel’s PMOS stack leaves more room between ribbons, and W fills those gaps while the thicker NMOS stack leaves W mainly in the upper trench. Gate-stack EDS maps. The W between Intel’s PMOS ribbons provides a conductive path close to the lower gates. Where WFM fills the entire gap, the gate still surrounds the channel, but voltage reaches it through the more resistive work-function films. Thinner WFM and dipole tuning preserve room for low-resistivity fill; Mo and Ru are alternative fill metals being developed for further scaling. [24] A masked, sequential WFM flow explains the different gate heights and inter-nanosheet fill. The proposed sequence below shows how separate NMOS and PMOS work-function steps produce that geometry. Enabled by the BSPDN process, Intel replaces the dense-logic silicon subfin with dielectric, removing the parasitic conduction path below the ribbons and reducing substrate-related capacitance. A retained silicon body as in classical, non-SOI, planar and FinFET designs needs junction and punchthrough-stop engineering to suppress leakage. Dielectric isolation makes that leakage less sensitive to the subfin doping profile but adds removal and fill steps. It also weakens the direct thermal path through silicon, making the contacts, metal stacks and package more important for heat extraction. [24], [26] Fluorine is concentrated around selected Intel device structures in the maps. WF6 is a standard precursor for W nucleation and fill, while barrier films protect adjacent dielectrics from fluorine attack. Low-fluorine W processes reduce the residual-F burden. Chloride-based precursors avoid introducing F during W deposition, but require control of chlorine attack, nucleation and fill quality. The integration target is a continuous, low-resistance W path with a thin protective liner and minimal chemical damage to the surrounding stack. [20], [27], [28] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. We measured cell height, gate pitch, metal geometry, and ribbon dimensions at the XTEM sites shown below. The tables group these dimensions by site and device polarity. Our “sheet cuts” cross the silicon channel and show the ribbons end-on. “gate cuts” run along the channel through successive gates. The 18A logic cell dimensions point to a five-track logic library while the N3E and Intel 3 cell dimensions evidence a seven-track logic library. The DDR-PHY uses wider M0 wires and much larger spacing than core logic. That trades routing density for lower wire resistance and weaker coupling between neighboring nets. The geometry suits the current delivery and coupling requirements of analog, clock, and I/O circuitry. PowerVia lets 18A combine a compact cell height with wider M0 geometry by moving the main power rails off the signal-routing tracks. That relaxes local wire scaling while preserving a small cell footprint. Cell height and gate pitch set the geometric density; pin access and routability determine how much of it a real block can use. [29] The biggest takeaway from our gate-pitch measurements is that Intel 18A compute logic and TSMC N3E GPU logic have similar density in the Bohr representative-cell model. The 18A example is 18.6% denser than the Intel 3 GPU example. Gate pitches are nearly identical across the three sites, so cell height drives most of the difference. The Bohr model combines a four-transistor NAND2 spanning three gate pitches and a 32-transistor scan flip-flop (SFF) spanning nineteen pitches, weighting their densities 60:40. The sensitivity column shows how independently changing cell height and gate pitch by ±1 nm changes the result. This compares representative cell geometries; whole-die density also depends on cell mix and placement. The 18A P-core gives M0 substantially more metal cross section than the N3E vector engine. Treating each profile as a trapezoid gives 2.63 times the area per line and 1.84 times the area after normalization by routing pitch. The larger section reduces the geometric contribution to line resistance and lowers current density for a given current. Taller and wider wires also add capacitance, so circuit delay depends on the balance of resistance and capacitance. The DDR-PHY has less metal area per routing width than the 18A core fields, while remaining above N3E. [30] Area = height × (top CD + bottom CD) / 2, including liners. Area/pitch normalizes by routing width. Taper is the symmetric sidewall angle from vertical, with the largest angle belonging to the DDR-PHY. Compute tile The measurements show how ribbon dimensions and gate-stack geometry vary across the compute tile and between NMOS and PMOS to balance channel drive, gate load and the space needed for the dielectric/WFM stack across logic, SRAM and the DDR-PHY. Width mainly changes available channel perimeter; thickness also changes electrostatic control and carrier confinement. Gate-stack thickness then determines the space left for low-resistivity fill P-core and LP E-core logic Both the P-core and LP E-core use multiple nanosheet widths. Widths are measured on high-magnification XTEMs while wider-field images demonstrate additional width choices within the LP E-core. Multiple widths are expected even within an LP E-core. Timing-critical paths, buffers and cells with different fanout need different drive strengths. The lower-magnification fields show this width diversity beyond the sites quantified in the table. L2 and L3 SRAM GAA gives SRAM designers another way to balance the pull-up (PU), pass-gate (PG), and pull-down (PD) transistors. FinFET bitcells set device strength through fin count while GAA adds nanosheet width as a sizing knob. In a 6T SRAM cell, a strong pull-down relative to the pass-gate limits read disturbance, while a strong pass-gate relative to the pull-up improves writability. During a write, the pass-gate and write driver pull the node storing “1” below the inverter trip point. During a read, the pull-down holds the node storing “0” low. Bias, threshold voltage, mismatch and assist circuitry set the remaining margin. FinFET high-current cells commonly use a PU:PG:PD fin-count pattern of 1:2:2, a device-sizing ratio rather than a current ratio. Ribbon width lets Intel balance SRAM strengths without adding whole fins. The L2 cell uses its narrowest ribbons for PU and widest for PD, improving writability and read stability respectively. Intel’s disclosed HCC operates without assist; its denser HDC uses negative-bitline write assist. Pulling the selected bitline briefly below ground increases pass-gate overdrive so it can overpower the pull-up at lower supply voltage. That buys density and low voltage writability at the cost of boosting circuitry, switching energy, and additional voltage stress that must be controlled. [31], [32] Four rectangular ribbons give the perimeter = 8 × (width + thickness), before corner rounding. PG/PU is 1.49 and PD/PG is 1.16. The L3 structures closely resemble L2 in layout and cell height. Fewer L3 nanosheet widths are tabulated because fewer high-magnification images were available. DDR PHY The DDR-PHY trades density for controlled analog behavior and reliable off-chip signaling. It contains drivers, receivers, delay circuits, and calibration logic that set drive strength, sampling time, and voltage margin. Repeated four-sheet devices with similar widths fit the use of regular transistor units for matching and programmable drive. Its wider local wiring provides room for current delivery and separation of sensitive signals, while consuming more area than a dense core-logic grid. The layout serves the memory channel’s electrical requirements as well as digital logic density. [33] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Intel 3 GPU devices Vector engine logic Intel 3’s XVE logic uses two-fin PMOS and NMOS devices with power rails in M0. Its cell height and M0 pitch give a seven-track geometry, two tracks more than the 18A logic. One-fin groups also appear among the two-fin devices. Intel 3 L2 SRAM The Intel 3 L2 SRAM uses the familiar HCC sizing pattern: one PU fin, two PG fins, and two PD fins. N3E GPU devices Vector engine logic The N3E XVE field contains repeated two-fin devices with seven-track cell geometry. N3E remains a FinFET process, giving Panther Lake a direct FinFET-to-RibbonFET comparison. N3E L2 SRAM The N3E L2 SRAM uses the same PU:PG:PD fin-count pattern of 1:2:2. Panther Lake-U follows Lunar Lake’s floorplan quite closely. Both pair 4 P-cores with 4 LP E-cores and NPU, media and display engines in similar locations. Lunar Lake also uses Xe2, the direct predecessor to Panther Lake’s Xe3 GPU. This makes Lunar Lake the most direct basis for our comparisons. Arrow Lake differs in core count and uses the older Xe-LPG GPU architecture, so we only use it where it offers a more direct component-level comparison. Compute tile Panther Lake compute-tile floorplans remain sparse even months after launch. Intel 18A’s backside metal and dielectric stack must be removed without damaging the underlying structures before a clean transistor-level floorplan can be imaged. Most published die shots hide or heavily process the background, but we are quite proud of the die shot we achieved and are excited to show the work we have done. We measured the areas of the key components on the compute tile and compared them with their Lunar Lake predecessors on TSMC N3B. These help us to capture changes in block area and compare the two chips across process nodes and designs. Our total tile areas exclude the scribe-line area. The compute-plus-GPU subtotal below uses the PTL-U compute tile and GT1 GPU; it excludes the I/O tile and passive base. Individual block areas use the boundaries marked on the floorplans The compute-plus-GPU row is recomputed from the displayed PTL-U and GT1 areas. Component rows use their stated per-region counts and are not an additive partition of the whole tile. The P-core area remains almost unchanged between Lunar Lake and Panther Lake, despite L2 capacity increasing from 2.5 MiB to 3 MiB. Arrow Lake uses the same Lion Cove core as Lunar Lake but also has a 3 MiB L2. Cougar Cove fits 20% more L2 into the same P-core area. The larger private cache keeps more of each core’s working set close to its execution units, reducing access to shared L3 and DRAM. Extra capacity adds storage leakage and lookup energy, so designers balance it against avoided lower-level accesses. The shared P-core L3 cache also shrank by 14.8%. [2] Cougar Cove combines a similar footprint with Intel’s reported power-efficiency improvements. RibbonFET’s tighter channel control reduces leakage, while PowerVia reduces supply droop and allows tighter voltage guardbands. [1] Darkmont’s four-core LP E-core cluster is 5.0% smaller than Skymont’s on Lunar Lake, with most of the reduction in its L2 regions. The 1 MiB region shrank by 8.4% and the 1.5 MiB region by 14.9%. The tag arrays also use one fewer visible row. Tags identify which memory addresses the data array holds, so rearranging them changes the cache’s layout and wiring without requiring less data capacity. [2] The LP E-cores share one L2. This pools capacity and avoids duplicating all the cache machinery, but the four cores contend for its banks and bandwidth. Their separate cluster also keeps light work away from the performance cluster and its L3, allowing that larger domain to sleep. [1], [2] Cache area includes more than the storage cells. Tags identify each line, decoders select rows, sense amplifiers read the small bitline signal, and wires connect to the banks. Splitting an array into smaller sections shortens wordlines and bitlines, improving access speed, but duplicates peripheral circuits. Panther Lake’s smaller cache regions therefore reflect the complete memory implementation, including how much of each region is devoted to storage. [34] Unlike Meteor Lake and Arrow Lake, Panther Lake has no separate SoC tile. The NPU, LP E-cores, memory controllers, PHYs, media and display engines now share the compute tile. This removes an active die and keeps CPU memory traffic on one die. The cost is moving PHY and I/O-related circuitry onto 18A: drivers, receivers and analog circuits must still meet external voltage, loading and signal-integrity requirements, so their area does not shrink like dense digital logic. [1], [2] The biggest shrink comes from the NPU, which occupies 36.9% less area. NPU 5 consolidates the same total INT8 MAC count into half as many neural compute engines. Each of the three NCEs has a larger MAC array to make the complete NCE envelope 22.6% larger than an NPU 4 engine. Consolidation also halves the number of scratchpads and SHAVE DSPs, from 12 to 6. The MAC array handles matrix multiplication and convolution, while SHAVE executes vector and custom operations that fit the array poorly. [1], [2], [35] The paired floorplans identify each NCE envelope and its scratchpad, MAC, and SHAVE regions. Each measured MAC polygon is counted once per NCE in the area accounting below. The scratchpads store weights, activations, and intermediate results near the MAC arrays, allowing repeated use without fetching them again from DRAM. Halving their number delivers the largest measured area saving but leaves less local storage for the same total MAC count. Layers that no longer fit locally require smaller working tiles or more transfers of intermediate data. The benefit depends on keeping the enlarged arrays busy while managing that tighter storage budget. [36] NPU 5 also adds native FP8. Using half the operand width of FP16 reduces storage and transfer demand, helping workloads fit the smaller local memory budget. Lower precision and format-dependent range make scaling and model validation part of deployment. Hardware activation functions further reduce work that would otherwise occupy the programmable DSPs. [1], [2] Microsoft requires an NPU to deliver at least 40 TOPS for Copilot+ PCs. Both Lunar Lake and Panther Lake meet this threshold, but Panther Lake uses significantly less silicon. GPU tiles Panther Lake is Intel’s first product with Xe3, its latest GPU architecture. It offers two different GPU tiles: a smaller GT1 tile with 4 Xe3 cores on Intel 3 and a larger GT2 tile with 12 Xe3 cores on TSMC N3E. Panther Lake allows us to compare the same GPU architecture across both Intel 3 and TSMC N3E. Wildcat Lake adds a third Xe3 implementation on Intel 18A. A future newsletter will detail Xe3 and its implementation differences across all three process nodes. GT2 scales Xe3 to a different physical layout, with render slices arranged vertically instead of GT1’s horizontal arrangement. Slice placement sets the distances to shared cache banks and the D2D interface. Those wires consume area and add delay, so scaling the number of Xe cores also requires a new balance of cache placement, routing and timing. [1] What’s immediately obvious is that the GT2 tile on TSMC N3E has much smaller Xe cores than GT1. These block areas include logic, caches, and routing. An Xe core on the GT1 tile is ~69% larger than one on Lunar Lake, and ~55% larger than one on GT2. Intel 3 therefore uses substantially more area per Xe core. The block-area gap exceeds the measured logic and SRAM density gaps, bringing routing, timing targets, cell mix, and floorplan allocation into the comparison. The measured vector/matrix engine region is almost unchanged between Lunar Lake and Panther Lake’s GT2 tile. Xe3 retains eight 512-bit vector engines and eight 2048-bit XMX engines per core. Its gains also come from feeding those engines more effectively: more resident threads hide stalls, and variable register allocation lets shaders trade registers per thread against the number of threads kept active. [1] The shared L1/SLM capacity increased by 33% from 192 KiB to 256 KiB, while its area increased only 5%, raising effective density by 27%. L1 retains reused cache lines, while software-managed SLM lets a thread group share data locally. Both reduce traffic to more distant memory. Allocating more SLM per group can also limit how many groups reside on a core at once. [1], [37] The GT1 tile carries 4 MiB of L2 against 16 MiB on the GT2 tile. GT1 divides its L2 cache into four 1 MiB banks, while GT2 uses eight 2 MiB banks. Each bank contains 128 macros, but each N3E macro stores 16 KiB, twice the Intel 3 macro’s 8 KiB capacity. The N3E macro is only 54% larger while holding twice as many bits, giving it 30% higher density: ~23.7 Mbit/mm² versus 18.3 Mbit/mm². Including bank-level circuitry, the gap widens to ~16.9 Mbit/mm² on GT2 versus ~10.4 Mbit/mm² on GT1. GT2 gains density with its macros storing more bits per unit area, and those macros occupy more of each cache bank. Larger macros spread decoder and sense-amplifier overhead across more storage, while a more compact bank layout reduces the share spent on control and routing. The compromise is longer wordlines and bitlines that carry more capacitance. [34] I/O tile Panther Lake uses two I/O tile variants, both fabricated on TSMC N6. The smaller one provides 4 PCIe 5.0 and 8 PCIe 4.0 lanes and serves lower-tier systems as well as those without a discrete GPU, while the larger one adds 8 PCIe 5.0 lanes, bringing the total to 20 lanes, for discrete-GPU connectivity. Panther Lake SKUs with the larger 10- or 12-Xe GPUs use the smaller I/O tile. [38] The smaller I/O tile adds a PCIe 4.0 block and a Thunderbolt block to Lunar Lake’s I/O layout, providing four additional PCIe 4.0 lanes and another Thunderbolt 4 port. Its repeated N6 blocks retain nearly identical areas and layouts. Reusing these proven PHYs and controllers avoids porting and requalifying external interfaces on 18A, where faster digital logic offers less benefit to circuits constrained by the off-chip link. [38] SemiAnalysis’s teardown lab (STEEL) dives deep into the world’s advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. We’re hiring technical experts from system to transistor and everywhere in between. Check out our Careers page. Panther Lake offers scalability and modularity through its disaggregated packaging that partition compute, GPU, and I/O silicon into separate tiles allowing for a suite of tile configurations. This partitioning makes the package part of Intel’s node economics as it determines how much leading-edge wafer area each product consumes, which functions can remain on other processes, and how much configuration freedom Intel can offer from a shared set of tiles. Furthermore, fabricating the compute and GPU tiles separately confines the new 18A process to the compute tile and allows graphics and I/O to use other, more established, and more cost-effective processes. For Panther Lake, the GPU and I/O tiles are assembled alongside the compute tile on a passive silicon base using Foveros-S. Intel’s current technology brief lists a nominal 36 µm pitch for Foveros-S. Through-silicon vias (TSVs) in the base connect the fine wiring above to the larger package connections below. The functional tiles sit side by side on that passive base in a 2.5D configuration. [39] Our cross-section through the compute and GPU tiles shows the package’s wiring hierarchy. Microbumps connect each active tile to the passive silicon base; its fine redistribution layer (RDL) carries the short, dense tile-to-tile links. TSVs carry connections through the base to the package substrate, which fans them out to the much coarser motherboard solder joints. The base supplies interconnect, while computation remains in the active tiles above it. [39] At the compute-tile edge, the higher-magnification inset shows a local microbump spacing of approximately 25.24 µm and a feature width of 12.33 µm. These local spacings are finer than Intel’s nominal Foveros-S value. The X-ray fields further confirm tighter neighboring bumps, consistent across every die-to-die area found on each tile. Additional X-ray analysis is offered after the paywall. Putting the memory controller beside the CPU removes the D2D transfer that CPU memory requests required in Meteor Lake and Arrow Lake. This avoids the extra transmitter, receiver, and link traversal, saving interface energy and latency. Panther Lake’s separate GPU still crosses a D2D link to reach DRAM, so its larger local caches also help contain package traffic. [1], [40] Smaller dies are less likely to contain a random fatal defect, and screening them before assembly prevents one bad tile from consuming a complete package of good silicon. Reuse also spreads design and qualification work across more products. Against those gains, Intel pays for the passive base, D2D circuits, extra bonding and test steps, and losses during assembly. Cost per working product across the portfolio captures the combined effect of wafer yield, reuse, test, and assembly. [29] Wildcat Lake packaging Intel launched Core Series 3, formerly Wildcat Lake, on 16 April 2026 for value mobile and edge systems. Wildcat Lake keeps 18A but removes the passive base and combines more functions on one die to simplify the package. The two products therefore reveal two distinct ways to commercialize the same leading-edge process. [41] Wildcat Lake’s 18A die combines up to two Cougar Cove P-cores, four Darkmont LP E-cores, two Xe3 cores and a smaller NPU. A separate platform-controller die supplies I/O, connected through UCIe, Intel’s first processor implementation of the standard. Consolidating graphics remove a tile boundary and the passive base, reducing assembly complexity for a modest-bandwidth value product. It also ties CPU and graphics scaling to the same die, giving up Panther Lake’s ability to swap in a much larger GPU. [42], [43] In July 2021, Intel CEO Pat Gelsinger set out an ambitious process roadmap aimed at regaining performance leadership by 2025, later described as five nodes in four years. Five years and one CEO later, Intel’s comeback story is not as unambiguously positive as Pat may have hoped. [44], [45] Intel once set the pace for process technology, bringing high-k metal gate technology and FinFETs into volume production years ahead of the rest of the industry. Its 22 nm FinFET process reached consumers with Ivy Bridge in 2012. [46] Intel’s integrated device manufacturing (IDM) model allowed its architects and process engineers to co-optimize products and processes. Starting with Sandy Bridge, Intel dominated x86, while AMD struggled with Bulldozer. That lead faltered at 14 nm and broke at 10 nm. Intel targeted a massive 2.7× density increase, but the node arrived years late and required several revisions before it could support Intel’s full lineup. This delay forced Intel to stretch 14 nm across six generations, while TSMC moved ahead in process technology and AMD recovered in x86. By 2019, Intel was still shipping 14 nm across most of its product stack, with its 10 nm client ramp focused on Ice Lake mobile processors. Meanwhile, TSMC was shipping N7 and N7+, and AMD’s Zen 2 compute chiplets used N7 to raise core counts and improve efficiency. Intel’s process failures were central to its decline, but unsound business decisions furthered their downward slide. Product delays compounded product mistakes, pushing client, server, and FPGA roadmaps off schedule. Several attempts to enter AI (Nervana and Gaudi) and networking (Tofino) also failed to establish lasting businesses. Intel’s recovery has focused on consumer CPUs and advanced packaging. Tiger Lake, Alder Lake, Lunar Lake and now Panther Lake have restored Intel’s consumer roadmap. On the process side, Intel 4 shipped with Meteor Lake, Intel 3 with Granite Rapids and Sierra Forest, and Intel 18A with Panther Lake. Intel has also made advanced packaging part of its foundry offering. However, Intel is still playing catch-up in servers. Several Xeon generations arrived years late and trailed contemporary AMD and Arm server CPUs in performance, efficiency, and core count. The process roadmap is back, but Intel does not hold the same process-technology leadership position it held prior to 10 nm. The introduction of gate-all-around nanosheets and backside power delivery are two of the biggest changes to transistor integration in a decade. Intel took on both changes at once: 18A paired its first RibbonFET with PowerVia in Panther Lake. Panther Lake is a substantial manufacturing milestone. Our cross-sections show how RibbonFET and PowerVia reshape local contacts and wiring, while the floorplans show where architectural consolidation and process choices save area. A sustained competitive lead depends on product performance, cost, yield, and the next implementation. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page.. [1] Intel, “Intel Tech Tour 2025 Panther Lake recap,” Doc. 866361, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/866361/ITT_2025_Panther_Lake_Recap1.pdf [2] Intel, “Core Ultra processors Series 3 datasheet, volume 1,” Doc. 872188-001, Jan. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/872188/872188-001.pdf [3] N. Horiguchi and E. Beyne, “Backside power delivery: How to power chips from the backside,” imec Reading Room, Nov. 25, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/how-power-chips-backside [4] W. Hafez et al., “Intel PowerVia technology: Backside power delivery for high density and high-performance computing,” in Proc. IEEE Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2023, pp. 1–2, doi: 10.23919/vlsitechnologyandcir57934.2023.10185208. [5] K. Fischer et al., “Intel 18A platform technology featuring RibbonFET (GAA) and PowerVia for advanced high-performance computing,” in Proc. Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2025, pp. 1–3, doi: 10.23919/vlsitechnologyandcir65189.2025.11075006. [6] K.-F. Cheng, C.-L. Teng, H.-Y. Huang, and H.-C. Chen, “Metal oxide composite as etch stop layer,” U.S. Patent 12 176 247 B2, Dec. 24, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12176247B2/en [7] S. W. King, “Dielectric barrier, etch stop, and metal capping materials for state of the art and beyond metal interconnects,” ECS J. Solid State Sci. Technol., vol. 4, no. 1, pp. N3029–N3047, 2015, doi: 10.1149/2.0051501jss. [8] A. V. Mule’, D. J. Towner, D. Seghete, C. R. Ryder, and A. A. Gonzalez, “Multi-layer etch stop layers for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20220102343 A1, Mar. 31, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20220102343A1/en [9] C.-C. Wang and J. H. Wang, “Interconnect structure with dielectric cap layer and etch stop layer stack,” U.S. Patent Appl. 20230253247 A1, Aug. 10, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20230253247A1/en [10] Y. J. Wu, K.-F. Cheng, C.-C. Lee, H.-K. Chang, and H.-Y. Huang, “Etch stop layer for interconnect structures,” U.S. Patent Appl. 20240332070 A1, Oct. 3, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240332070A1/en [11] M. G. Rainville, N. Shankar, K. S. Reddy, and D. M. Hausmann, “Deposition of aluminum oxide etch stop layers,” U.S. Patent Appl. 20180197770 A1, Jul. 12, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20180197770 [12] J. S. Leib et al., “Conductive lines having molybdenum liner and tungsten fill for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20240429126 A1, Dec. 26, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20240429126 [13] M. Naik, “Cobalt enables power and performance scaling at single-digit logic nodes,” Applied Materials, Dec. 17, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://www.appliedmaterials.com/us/en/blog/blog-posts/cobalt-enables-power-and-performance-scaling-at-single-digit-logic-nodes.html [14] Lam Research, “Breaking through AI’s invisible barrier with molybdenum,” Lam Research Newsroom, May 6, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://newsroom.lamresearch.com/molybdenum-metallization-ai-revolution [15] P. Yashar, G. Malyavanatham, and H. Vijwani, “Integrated circuit interconnect structures with niobium barrier materials,” U.S. Patent Appl. 20240112951 A1, Apr. 4, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240112951A1/en [16] Applied Materials, “Applied Materials unveils chip wiring innovations for more energy-efficient computing,” Applied Materials Investor Relations, Jul. 8, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://ir.appliedmaterials.com/news-releases/news-release-details/applied-materials-unveils-chip-wiring-innovations-more-energy [17] Samsung, “Samsung showcases AI-era vision and latest foundry technologies at SFF 2024,” Samsung Semiconductor, Jun. 13, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://semiconductor.samsung.com/news-events/news/samsung-showcases-ai-era-vision-and-latest-foundry-technologies-at-sff-2024/ [18] C. W. Yeung et al., “Channel geometry impact and narrow sheet effect of stacked nanosheet,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2018, pp. 28.6.1–28.6.4, doi: 10.1109/iedm.2018.8614608. [19] S. Mochizuki et al., “Evaluation of (110) versus (001) channel orientation for improved nFET/pFET device performance trade-off in gate-all-around nanosheet technology,” in Proc. Int. Electron Devices Meeting (IEDM), Dec. 2023, pp. 1–4, doi: 10.1109/iedm45741.2023.10413854. [20] D. G. Ouellette et al., “Fabrication of gate-all-around integrated circuit structures having molybdenum nitride metal gates and gate dielectrics with a dipole layer,” U.S. Patent 12 051 698 B2, Jul. 30, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12051698B2/en [21] imec, “Advancing the CFET-based device roadmap with novel integration modules and standard-cell architectures,” imec, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/advancing-cfet-based-device-roadmap-novel-integration-modules-and-standard-cell [22] A. Reznicek, X. Miao, C. Lee, and J. Zhang, “Wrap around contact for nanosheet source drain epitaxy,” U.S. Patent 11 302 813 B2, Apr. 12, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US11302813B2/en [23] J. A. Kittl, J. G. Hong, D. R. Palle, and M. S. Rodder, “Methods for varied strain on nano-scale field effect transistor devices,” U.S. Patent 9 978 833 B2, May 22, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9978833B2/en [24] S. Gandikota et al., “Method of reducing metal gate resistance for next generation NMOS device application,” Int. Patent Appl. WO 2024/137272 A1, Jun. 27, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/WO2024137272A1/en [25] J. Zhang et al., “Full bottom dielectric isolation to enable stacked nanosheet transistor for low power and high performance applications,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2019, pp. 11.6.1–11.6.4, doi: 10.1109/iedm19573.2019.8993490. [26] C. Yoo, J. Chang, Y. Seon, H. Kim, and J. Jeon, “Analysis of self-heating effects in multi-nanosheet FET considering bottom isolation and package options,” IEEE Trans. Electron Devices, vol. 69, no. 3, pp. 1524–1531, Mar. 2022, doi: 10.1109/ted.2022.3141327. [27] S. S. Pradhan, D. B. Bergstrom, J.-S. Chun, and J. Chiu, “Tungsten gates for non-planar transistors,” European Patent Appl. EP 3 506 367 A1, Jul. 3, 2019. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/EP3506367A1/en [28] L. Schloss and X. Ba, “Tungsten films having low fluorine content,” U.S. Patent 9 754 824 B2, Sep. 5, 2017. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9754824B2/en [29] Intel Foundry, “Accelerating AI and HPC with advanced process and packaging technologies,” Doc. 367370-001US, Jun. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-11/intel-foundry-hpc-ai-brief.pdf [30] M. Lofrano, X. Chang, H. Oprins, and Z. Tokei, “Mitigating the thermal bottleneck in advanced interconnects,” imec, Sep. 28, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/mitigating-thermal-bottleneck-advanced-interconnects [31] S. Bair, “Intel at ISSCC 2025: Navid Shahriari invited talk, eight papers, forums, panelist & product details,” Intel Community, Feb. 19, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://community.intel.com/t5/Blogs/Tech-Innovation/Edge-5G/Intel-at-ISSCC-2025-Navid-Shahriari-Invited-Talk-Eight-Papers/post/1667592 [32] D. Chandra, E. Potladhurthi, D. R. S. Reddy, and K. S. Rengarajan, “Tunable negative bitline write assist and boost attenuation circuit,” U.S. Patent Appl. 20160203857 A1, Jul. 14, 2016. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20160203857A1/en [33] Synopsys, “Advantages of firmware-based training in high-speed DDR IP,” Synopsys IP Technical Bulletin. Accessed: Sep. 14, 2026. [Online]. Available: https://www.synopsys.com/articles/firmware-based-training-ddr-ip.html [34] N. Muralimanohar, R. Balasubramonian, and N. P. Jouppi, “CACTI 6.0: A tool to understand large caches,” Hewlett-Packard Laboratories, 2009. Accessed: Sep. 14, 2026. [Online]. Available: https://users.cs.utah.edu/~rajeev/cacti6/cacti6-tr.pdf [35] Intel, “Intel Tech Tour 2024 Lunar Lake AI hardware accelerators,” Doc. 824436, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/824436/2024_Intel_Tech%20Tour%20TW_Lunar%20Lake%20AI%20Hardware%20Accelerators.pdf [36] Y.-H. Chen, J. Emer, and V. Sze, “Eyeriss: A spatial architecture for energy-efficient dataflow for convolutional neural networks,” in Proc. 43rd ACM/IEEE Annu. Int. Symp. Comput. Archit. (ISCA), Jun. 2016, pp. 367–379, doi: 10.1109/isca.2016.40. [37] Intel, “Introduction to the Xe-HPG architecture,” Doc. 758306, Nov. 4, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/developer/articles/technical/introduction-to-the-xe-hpg-architecture.html [38] Intel, “Core Ultra processors Series 3 for the edge,” Doc. 855291. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/855291/Intel%C2%AE%20Core%E2%84%A2%20Ultra%20Processors%20Series%203%20for%20Edge%20Overview_2.pdf [39] Intel Foundry, “Foveros technology brief,” Doc. 366411-001US, Feb. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-07/foveros-25d-product-brief.pdf [40] D. Das Sharma, “UCIe: Building an open chiplet ecosystem,” UCIe Consortium, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.uciexpress.org/_files/ugd/0c1418_c5970a68ab214ffc97fab16d11581449.pdf [41] Intel, “Intel launches Intel Core Series 3 processors,” Intel Newsroom, Apr. 16, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-launches-intel-core-series-3-processors-changing-the-game-for-everyday-computing.html [42] Intel, “Core Series 3 launch press deck,” Apr. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://download.intel.com/newsroom/2026/Intel-Core-Series-3/Intel-Core-Series-3-Launch-Press-Deck.pdf [43] Intel, “Intel outlines architectures for agentic AI at Hot Chips 2026,” Intel Newsroom, Aug. 24, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-outlines-architectures-for-agentic-ai-at-hot-chips-2026.html [44] Intel, “Intel accelerates process and packaging innovations,” Intel Investor Relations, Jul. 26, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/filings-reports/all-sec-filings/content/0001193125-21-224438/d199788dex991.htm [45] Intel, “Intel reports third-quarter 2021 financial results,” Intel Investor Relations, Oct. 21, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/1505/intel-reports-third-quarter-2021-financial-results [46] Intel, “3rd generation Intel Core processors bring exciting new experiences and fun to the PC,” Intel Investor Relations, Apr. 23, 2012. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/577/3rd-generation-intel-core-processors-bring-exciting
Wrapping up a dominant regular season against losing teams
Guaranteed with the most wins against losing teams, the Dodgers finish their regular season in San Francisco
For Trump and Xi, a warm farewell and unfinished business
The presidents praised their relationship over tea and viewed America’s founding documents, with few apparent breakthroughs on the issues dividing their countries.
Georgia x Northern Ireland - Highlights, Summary and Match Report
Georgia controlled much of the contest at the Boris Paichadze Dinamo Arena, finishing with 62.2% possession, 11 shots and nine corners, while Northern Ireland were more direct with 12 attempts of thei...
Report: Cubs, Red Sox Could Finish Series In Tampa
As a looming nor’easter forces scheduling shifts and doubleheaders, the regular-season finale faces a potential relocation to Tropicana Field to bypass Boston’s worsening weekend weather forecast.
Texas A&M Offense Faces Major Test Against LSU’s Dominant Defense
Texas A&M must protect Marcel Reed, establish the run and finish drives against an LSU defense allowing only 33 rushing yards per game.
Raul Rosas Jr. developing game plan to finish Raoni Barcelos
Raul Rosas Jr. has been developing a game plan and plans to finish Raoni Barcelos this weekend.
'I would encourage patience with Wirtz'
"Liverpool fans were naturally expecting the finished product to arrive and Florian Wirtz probably isn't that just yet," says Liverpool podcaster Josh Williams, who also admits the 23-year-old isn't living up to his £116m price tag. Wirtz has made 55 appearances for the Reds, scoring seven goals and contributing 11 assists, since penning a five-year deal to move to Anfield from Bayern Leverkusen in June 2025.
Florida Men’s Basketball Opens Practice with Unfinished Business
Gator Boys are back – almost. Men’s basketball officially kicks off its season in November, but the SEC regular-season champions started practice Monday. After a disappointing end in Florida’s pursuit of back-to-back national titles last season, coach Todd Golden and the team are coming into the season with a mindset to finish the job. “You […]
Rockies Finish Up at Home With Loss to Diamondbacks
Colorado Rockies starting pitcher Tanner Gordon was not sharp early on Thursday, helping the Arizona Diamondbacks get a victory at Coors Field.
Rangers finish home slate with 3-1 win over Mets
Texas (79-80) stopped a three-game losing streak and moved a half-game ahead of Houston, which played Thursday night at the Athletics.
Carlos Alcaraz Calls for End to Late-Night Finishes
Alcaraz's US Open quarterfinal match with Ben Shelton ended after 3:30 a.m.
Airline trio take final steps towards launch of joint cargo business
Qatar Airways Cargo, IAG Cargo and the cargo division of Malaysia Airlines have nearly finished integrating their operations and systems for their upcoming joint cargo business.
Supercomputer predicts if Juventus will make the top four
Juventus failed to finish in the top four at the end of last season, and the Bianconeri cannot afford to suffer the same fate again this campaign. That is why the club worked so hard during the summer...
Optimi Health produces psilocybin capsules for Phase II MDD study
Patient dosing is scheduled to finish by the end of 2027.
Alcaraz on late finishes, missing Sinner and Laver Cup return
Carlos Alcaraz discusses his US Open return, why he "misses" rival Jannik Sinner and his excitement for this year's Laver Cup.
Manchester United announce seventh annual loss in latest financial record
Manchester United finished third in the 2025/26 Premier League season while recording their lowest wage bill in six years, The Athletic reports.United spent £302 million on wages during the year, dow...
‘Unfinished business’ fueling championship expectations for UMD men’s hockey
‘Unfinished business’ fueling championship expectations for UMD men’s hockey
Dodgers on Deck: Thursday, September 24 vs. Padres
The Dodgers and San Diego Padres finish off their season series on Thursday, which is the Dodgers’ final home game of the 2026 regular season. Tyler Glasnow takes the ball for Los Angeles, with Nick Pivetta starting for San Diego. Both have battled injuries this season, with Thursday the 13th start for Glasnow and just […]
Customers say unlicensed pool contractor left them with unfinished holes, thousands in losses
Multiple customers say a contractor named Rob Houston who does business by the name of "Splash Solutions" and "Splash Pools" took tens of thousands of dollars from them for inground pool projects and left the work unfinished or never started.
Texas high school cancels football for two full seasons
Keene ISD finishes its first season in the UIL with a 1-3 record. The Chargers will not finish their 2026 varsity season and won't play in 2027. Here's why.
Ed Boon finally gives comments about Injustice 3 rumors but he's as cryptic as ever
It's been a year since NetherRealm Studios announced that Mortal Kombat 1 was finished with DLC development. As such, they have since moved on to their next project, whatever that may be.We've seen this song and dance ...
Breaking | Bessent and He meet again for ‘some unfinished business’ as Xi summit nears
US Treasury Secretary and Chinese Vice Premier held an unscheduled meeting in Washington on Wednesday following Sunday’s trade talks.
What We Learned About College Football in Week 3
Trinidad Chambliss Vaults Up the Heisman List Chambliss finished eighth in Heisman votes in 2025, but if voting took place following the playoffs the odds are that Chambliss would have been second after Fernando Mendoza. Chambliss has picked up right where he left off, and should be the current frontrunner after another incredible display to […]
Seedy K’s Peerless Pigskin Prognostications: Week IV
There were any number of comeuppances over last weekend. For Texas A&M, Lane Kiffin, NC State Wolfpack, Coach Prime, UVa and . . . . . . oh yeah, Seedy K and his predictioneering prowess. A week after coming oh so close to a perfecto, and still finishing 6-1, I laid an egg as big […]
Robertson tells Spurs to 'forget' past woes
Andy Robertson has urged his Tottenham team-mates to forget about their struggles over the past two seasons as they try to haul themselves off the bottom of the Premier League table.Former Liverpool full-back Robertson, who joined Spurs on a free transfer, said it was down to the players themselves to change the mindset at the club, which has suffered back-to-back 17th-placed finishes over the past two seasons.
What's next for NYC delivery apps after Mamdani's $131.5M DoorDash win
Mayor Zohran Mamdani finished what Eric Adams started with DoorDash. Here's what's next in NYC's delivery app crackdown.
Ruben Amorim wants Real Madrid forward Endrick at AC Milan
AC Milan are already considering squad additions as they look to finish in the top four and return to the Champions League under head coach Ruben Amorim.According to Calciomercato, the Rossoneri have ...
Stephen A. Smith Shares Harsh Career Advice for Aaron Rodgers
Aaron Rodgers is a very outspoken individual who doesn’t shy away from controversy. That also makes him a target when his play on the field isn’t up to par.The 42-year-old had a rough game Sunday as the Pittsburgh Steelers fell to the New England Patriots by a 20-3 final score. Rodgers finished 23/39 for 187 […] The post Stephen A. Smith Shares Harsh Career Advice for Aaron Rodgers appeared first on HEAVY.
Schaeffer Deserves Credit for Rockies' Improvement in 2026
Sure, the Colorado Rockies, more than likely, will finish with 100 losses again this season. Still, manager Warren Schaeffer has helped this ballclub show definite signs of growth.
Vance pushes for health fraud legislation in the Senate
The White House is working with Senate leadership to get health care fraud legislation over the finish line before the end of the congressional session, Vice President JD Vance said Tuesday during an announcement about cracking down on health care fraud. As part of that announcement, Vance said the Trump administration has removed about 760,000 enrollees […]
Governor Evers points to K-12 funding as unfinished business as tenure winds down
WISCONSIN DELLS, Wis. -- With only months remaining in his tenure, Governor Tony Evers says increasing support for Wisconsin's public schools is one area
Tyrone Tracy News: Steelers, Giants Connected In Trade Rumors
Tyrone Tracy is still a member of the New York Giants, but that may not be the case for long. A former fifth-round pick in the 2024 NFL Draft, the Purdue product began his career on a relatively high note. Appearing in all 17 games while making 12 starts, the rookie finished his inaugural campaign …
‘Halo’ to move under Call of Duty publisher as Xbox announces layoffs
The cuts affect Halo Studios, other first-party developers, and management and central functions within Xbox, according to an announcement posted this morning by Matt Booty, Xbox’s chief content officer. The company is now about 75 percent finished with a restructuring announced earlier this year.
Trump defends US interventions abroad ahead of 'big decision' on Iran: 'Settling years of unfinished business'
At the UN General Assembly in New York City on Tuesday morning, President Donald Trump delivered a speech on America's role in global leadership.
The B-teams making elite look ordinary
The fact that Arsenal are not invincible has clearly come as a bit of a surprise to some people. Both Brighton and Brentford will sit in the top four for the three weeks of the international break, with Bournemouth finding their feet under a new manager. In the last four seasons Brighton have averaged an eighth-place league finish - astonishing for a smaller provincial club outwith the major cities.
Florida Chamber’s free-enterprise roadshow rolls into Illinois
Gov. JB Pritzker finishes behind Zohran Mamdani for a tongue-in-cheek economic development honor.
Toronto Maple Leafs William Nylander Point Projections for 2026-27
We will finish up with one final Toronto Maple Leafs player point total prediction for the upcoming 2026-27 season. For Maple Leaf players, we have already completed Matthew Knies, Gavin McKenna, Auston Matthews, and today we bring you the William Nylander point projections. So, let's get into it. '26-27 Toronto Maple Leafs William Nylander Point …
Perkiomen's Patrese Feamster has "unfinished" business after committing to UMass
By Matt Allibone (@Bad2theAllibone) Patrese Feamster could have felt elated. He could have felt relieved. He had just accomplished a lifelong goal, after all. Instead, Feamster had a different feeling after committing to UMass earlier this month. The feeling is unfinished,” Feamster s
Predicting Where Lakers Finish in Loaded Western Conference
Where will the Los Angeles Lakers finish in the West?
Jiang Feng: The Unravelling of German & European Politics
A state election in eastern Germany has become a revealing test of the changing political landscapes of Germany and Europe, writes Jiang Feng, Professor and Chairman of the Council of the Shanghai Academy of Global Governance and Area Studies (SAGGAS) at Shanghai International Studies University. His analysis follows the decisive victory of the Alternative for Germany (AfD) (which has been classified as right-wing extremist by German authorities)in the state of Saxony-Anhalt on 6 September, in which it finished far ahead of its mainstream rivals. Jiang previously served as Minister-Counsellor at the Chinese Embassy in Berlin. The following article was published on 8 September 2026 on huanqiu.com, the online platform of the Global Times. On 6 September, the results of the state election in Saxony-Anhalt, Germany, were announced. The Alternative for Germany (AfD), classified as far-right by German authorities, made history by becoming the largest party in the state parliament, winning 43.8 per cent of the vote — twice its share in the previous election. The Christian Democratic Union (CDU), which had governed the state continuously for 24 years, won just 17.2 per cent, its worst result ever in Saxony-Anhalt. On the night the results were announced, the atmosphere at the CDU gathering was unusually calm. There was neither shock nor argument, as if the defeat had long been expected. Several veteran party members who had spent years working in the state government said: “Defeat is not a bad thing. It is time to make changes.” This state election has not only upended Saxony-Anhalt’s political landscape, but also laid bare the deep tensions between Germany’s traditional party structure and model of governance, on the one hand, and an increasingly polarised society on the other. Its repercussions are already being felt at the federal level, making Saxony-Anhalt a useful case study of the broader trend towards political polarisation and realignment in Europe. Governing Difficulties after Electoral Victory The most immediate consequence of the election is a historic setback for the mainstream party order that took shape in post-war Germany. In Saxony-Anhalt, the AfD has leapt from a peripheral party to the largest political force in the state. Its electoral base has expanded beyond the traditional category of “marginal protest voters” to take on the characteristics of a cross-class coalition. The party has not only consolidated its support in rural areas, but also attracted many middle-class voters and even members of the social elite with stable jobs, their own homes, and substantial incomes. It has thus evolved from a “protest party” into one with the potential to govern. Despite its commanding lead in the vote, however, the AfD faces an institutional obstacle to governing the state: the mainstream parties’ long-standing “firewall” against it. Neither of the two potential routes to forming a government appears likely to break the current political deadlock. The first would be a coalition of establishment parties, led by the CDU and bringing together the Social Democratic Party (SPD), the Greens, the Left Party (Die Linke) and the Sahra Wagenknecht Alliance (BSW) in a cross-camp government. In terms of parliamentary arithmetic, such a coalition could prevent the AfD from forming a government and preserve the outward stability of the traditional political order. Yet these parties are fundamentally divided over key issues including immigration, the energy transition, economic management, and cultural and education policy. Coalition negotiations would therefore be extremely difficult, and even if a government could be formed, it would most likely prove short-lived. More importantly, an alliance of establishment parties aimed at keeping the largest party out of government would play directly into the AfD’s narrative that “political elites are suppressing public opinion”. It could deepen perceptions of political unfairness, further strengthening the AfD’s political capital, and creating a dynamic in which “the more it is suppressed, the more people vote for it”. Ulrich Siegmund, the AfD’s candidate for state premier, has said that if efforts to form a government fail because other parties refuse to cooperate, the AfD will push for a fresh election, which he believes could deliver the party an absolute majority of seats. This points to more intense political battles ahead. The second option would be a coalition between the AfD and the BSW. Together, the two parties would command a simple majority in parliament, making this, on paper, the quickest route to forming a government. The BSW is the only elected party that has not ruled out cooperation with the AfD, and the two parties share some common ground, including on policy towards Russia. There is therefore a degree of political basis for cooperation. Were such a coalition to materialise, Germany would see its first state government jointly formed by a party defined as far-right and one with a far-left background, creating what might be called a “bipolar anti-establishment alliance”. Such an outcome would fundamentally break with the ideological boundaries of post-war German party politics. It is worth noting that even if the AfD ultimately fails to enter the state government, its roughly 47 per cent share of parliamentary seats would give it a powerful blocking minority. Without its consent, major decisions requiring a two-thirds majority — including constitutional amendments, significant budgetary adjustments, and state-level institutional reforms — would be extremely difficult to pass. Therefore, whoever ultimately forms the government, the AfD will be an unavoidable force in Saxony-Anhalt politics, with a direct influence on the state’s legislative process. Systemic Failures in Germany’s Governance Model The Saxony-Anhalt election result reflects a systemic failure of Germany’s post-war mainstream-party model of governance to adapt to rapidly changing socioeconomic conditions. It stems from multiple, mutually reinforcing structural tensions and highlights the existing political system’s difficulty in adapting to “an increasingly polarised society First, collective anxiety has replaced individual material hardship as a central driver of political mobilisation. The rise of the AfD can no longer be explained simply by poverty or social marginalisation. Its increasingly cross-class electoral base suggests that what is driving voters towards the party is, above all, concern about the broader direction of society. This anxiety about the future of the political community goes beyond individual gains and losses. In political discourse, economic anxiety has become closely intertwined with immigration, while immigration and refugee issues are, in essence, questions of social fairness. This perception turns conflicts over the distribution of social resources into negative assessments of governing parties, providing a broad social basis for far-right political narratives. Second, regional disparities and East German identity have undermined the strategy of addressing eastern Germany’s structural challenges at the regional level. More than three decades after German reunification, eastern states such as Saxony-Anhalt have experienced periods of economic growth, but their underlying economic structures remain weak, and household incomes and wealth remain significantly below those in western Germany. At the same time, they continue to face population outflow, an ageing population, labour shortages, and other structural challenges. At a deeper level, historical experiences — including the collapse of the former East German economic system, mass unemployment during the transition, and the westward shift of decision-making power over major issues — have left some residents with a sense of being “second-class citizens” and of being excluded. For years, the German government treated the “syndrome” of reunification as a regional problem to be gradually addressed at the local level. That approach is becoming increasingly unsustainable, as regional development disparities emerge as a core structural factor shaping national politics. Third, the erosion of institutional trust is perhaps the most decisive factor. AfD supporters tend to distrust establishment institutions, including parliament, government, and the mainstream media. Their concerns about economic security, pensions, and social fairness are significantly greater than the social average. Increasingly, their support for the AfD reflects not an expectation that the existing system can be improved, but a search for an alternative to the current political order. Such a systemic deficit of trust will be extremely difficult for the traditional parties to repair in the short term. Fourth, a generational shift in political mobilisation has amplified political polarisation. Unlike traditional parties, which rely heavily on offline rallies and mainstream media coverage, the AfD has developed a social-media mobilisation strategy built around “raising an issue — identifying who is responsible — offering a simplified solution — building a shared identity”. It turns complex social tensions into concise political narratives, rapidly channelling public sentiment into political support. The contrast on the eve of the election was particularly telling. The establishment parties, together with trade unions and churches, organised an offline march attended by more than 10,000 people, but its reach was largely confined to those present and to traditional media coverage. The AfD held a much smaller indoor event, yet livestreaming on TikTok, YouTube, and other platforms, combined with the involvement of online influencers, gave it a reach and mobilising capacity far beyond that of the march. The contrast illustrates how the traditional parties’ methods of political mobilisation are increasingly struggling to keep pace with a political environment transformed by changes in media technology. A Microcosm of Structural Political Change in Europe The shockwaves from the Saxony-Anhalt election quickly travelled beyond the state to the federal level. Calls for political accountability followed immediately after the results were announced. The governing CDU and SPD are now under enormous pressure, while Chancellor Friedrich Merz and Vice Chancellor Lars Klingbeil face an unprecedented test. Political polarisation in Germany is no longer simply a regional phenomenon. The post-war model of multiparty government by establishment parties is breaking down and being reshaped. Viewed in a broader European context, the Saxony-Anhalt election is part of a continent-wide wave of party polarisation, mainstream-party decline, and rising right-wing forces. Far from an isolated phenomenon, it is a microcosm of the structural political changes unfolding across Europe. Weak economic growth, cultural tensions over immigration, and declining trust in institutions are fuelling the rise of right-wing forces in several countries, challenging the liberal internationalist order established in post-war Europe. As a core member state of the European Union, Germany’s ability to adapt its political system and the direction of its politics will have profound implications for both European integration and the evolution of the international order. Subscribe [ Pekingnology China’s Germany watchers take stock of Berlin’s uneasy turn On 7 December 2025, nearly 50 Chinese scholars and policy researchers gathered in Beijing for the 2025年德国形势年终研讨会 “2025 Year-End Seminar on the Situation in Germany… Read more 9 months ago · 31 likes · 1 comment · YIRUI LI and Yuxuan JIA ](https://www.pekingnology.com/p/chinas-germany-watchers-take-stock?utm_source=substack&utm_campaign=post_embed&utm_medium=web&embedding_publication_id=1151841) [ Jiang Feng on Germany's 2025 and beyond: no easy exit ](https://www.eastisread.com/p/jiang-feng-on-germanys-2025-and-beyond) Yirui LI and Yuxuan JIA · Jan 24 The following is an op-ed by Jiang Feng, published on 29 December 2025 at Shanghai Observer 上观新闻, the digital platform of Jiefang Daily, the official newspaper of the Shanghai Municipal Committee of the Communist Party of China (CPC). [ Read full story ](https://www.eastisread.com/p/jiang-feng-on-germanys-2025-and-beyond)
Monday Morning Minnesota: The “Time To Say Goodbye” Edition
We come to the last week of the season, and the Twins have officially been eliminated from playoff contention and will not be able to finish the season with a winning record. On the bright side, Walker Jenkins figured out major league pitching! The Twins wrap up the season with a series in San Francisco […]
CMU makes progress on Hall of Sciences, campus improvements
Construction of the Richard King Mellon (RKM) Hall of Sciences progressed over the summer. Carnegie Mellon broke ground on the new building in June 2024 and expects expected to finish on schedule.
Pandemic Agreement Negotiator Warns Against Losing Momentum
As countries continue negotiating the unfinished WHO Pandemic Agreement, one of the original accord's architects warns that delays could put the process
Stellar Blade Still Not Finished, Four Free Bayonetta Costumes Coming to PS5
Original game will get "some changes" for sequel
Nothing from Keenan Allen on SNF
Keenan Allen was targeted five times on Sunday night but finished with just one reception.
Ole Miss Star Trinidad Chambliss Sends Powerful Message Beyond Football
Trinidad Chambliss had plenty of reasons to talk about football after one of the biggest wins of his Ole Miss career. The Rebels had just beaten No. 7 LSU 32-24, Chambliss threw for 363 yards and two touchdowns, and his fourth-quarter rushing score helped finish off an emotional night in Oxford. Yet when the Ole […] The post Ole Miss Star Trinidad Chambliss Sends Powerful Message Beyond Football appeared first on HEAVY.
Chiefs grab 33-30 win in overtime thriller
KANSAS CITY, Mo. (KSNT) — Victory is secured in an overtime thriller. Patrick Mahomes finished the night 32-for-47 with 382 yards and three touchdowns. Kenneth Walker III picked up his second-straight game with over 100 yards for the Chiefs, with 117 yards on 24 carries. Travis Kelce had nine receptions for 101 yards and a […]
Warren backs TRIA renewal but flags cyber and NBCR as unfinished business
A unanimous committee vote hides a longer list of unresolved coverage gaps
Warren backs TRIA renewal but flags cyber and NBCR as unfinished business
A unanimous committee vote hides a longer list of unresolved coverage gaps
Messi, Miami frustrated in 2-2 draw with San Diego
Lionel Messi and Inter Miami's hopes of overtaking Nashville at the top of Major League Soccer's Eastern Conference suffered a blow on Sunday after the champions were held to a 2-2 draw by San Diego in Florida.Tverskov once again found Dreyer with a pinpoint pass over the top and the Dane finished coolly to make it 2-2.
Wan'Dale Robinson finishes with one catch in Week 2
Titans WR Wan'Dale Robinson was finished with only nine receiving yards in Week 2
Denzel Boston records another long TD
Cleveland Browns wide receiver Denzel Boston finished with five receptions for a game-high 95 yards and a 55-yard touchdown in Week 2
Terry Francona Sees Something Bigger in Nick Lodolo's Strong Finish
The left-hander took another loss on Saturday, but his manager thinks these final starts are about much more than the score.
Analysis: Late goal eases pressure on Carrick
It is too early in the season for Michael Carrick's position to be under serious threat. With a three-week international break to come, there will be no escaping a certain amount of criticism and it is a long time to wait before Manchester United can attempt to start putting things right on the pitch. Overall, United were good value for a point and might even argue snatching all three would not have been unwarranted given their strong finish.
Philadelphia 76ers Projected To Finish No. 4 in Eastern Conference
The 76ers are poised for a great season. Sports Illustrated details who they think would lead the pack in the East.
What went right for the Cardinals in 2026?
The finishing touches are being put on to the St. Louis Cardinals season and despite another season missing the playoffs, the overall year has to be seen as a success. With the season being a fact-finding mission for the roster, there are very few remaining questions on the big league squad while the minor league […]
Chivas Let Victory Slip Away in El Clásico de México
Playing with intensity and fighting until the final minute, Chivas looked for the finishing touch but ultimately let the victory slip away, drawing 2-2 in El Clásico de México. With the point earned...
Report card: Strong run game leads Nebraska football past North Dakota
Nebraska football (3-0) worked past a relentless North Dakota squad to finish its non-conference schedule undefeated on Saturday night in Memorial Stadium.
3 Takeaways From Iowa’s 55-0 Dismantling Of Northern Iowa
It was all Hawkeyes as they finished a sweep of in-state rivals There was no doubt that Saturday belonged to […]
Nebraska Finishes Non-Conference Undefeated After Topping North Dakota
The Huskers moved to 3-0 with a 34-7 win over the Fighting Hawks.
Georgia Tech Cracked The Code At Southern Showcase
Georgia Tech's cross country squads dominated the Southern Showcase with a historic men's finish and multiple personal bests. See the full breakdown.
Roma’s Soule on Inter: ‘Obviously they are the strongest’
Matias Soule could not hide his frustration at the Stadio Olimpico, where Roma led the champions by two goals and finished the evening with only a point.With quotes via TuttoMercatoWeb, the Argentine ...
Analysis: Moyes' Toffees moving in right direction
Manager David Moyes will be delighted at the start his Everton side have made to the campaign. The Toffees won none of their final seven games as they finished 13th last season and missed out on the European qualification that at one stage had been within their grasp. Everton also suffered a tough end to the transfer window, with key attacking midfielder Iliman Ndiaye going to Manchester City in a £65m deal and striker Beto, their top scorer last season, leaving for Fiorentina for £14.6m.
Raphinha gives Barcelona clear signal on his long-term future
Raphinha has told RAC1 he would be happy to extend his Barcelona contract beyond its current 2028 expiry and finish his career at the club, according to Barca Blaugranes. The Brazilian is currently ti...
White Sox See 307-2 Scenario Go Against Them
The Chicago White Sox looked comfortably on their way to tying the AL Central Division at the top again with the Cleveland Guardians. The Guardians were finishing off a Friday night win over the Athletics, but the White Sox were also in control, leading 8-2 against the Detroit Tigers. That’s when everything went wrong. And […] The post White Sox See 307-2 Scenario Go Against Them appeared first on HEAVY.
Three Keys for Michigan State to Upset Notre Dame
Michigan State must finish drives and protect the ball to upset No. 3 Notre Dame. #GoGreen
Science Vs on the 49ers Substation: Anatomy of a Hatchet Job
In August, Pablo Torre Finds Out and Science Vs released an episode about my theory that electromagnetic fields from the electrical substation beside the 49ers facility may be contributing to the team’s run of soft-tissue injuries. As the originator of the theory, I was also a subject of the episode. I sat was interviewed by Wendy Zukerman and Rose Rimler of Sciene Vs. I sent them research, connected them with scientists, and spent hours digging through the City of Santa Clara’s and Silicon Valley Power’s records to help clarify critical details. Both Wendy and Rose came off as affable and professional, showing curiosity during the interviews, with Wendy going out of her way to question the “conspiracy theory” framing itself. Then they titled the episode We Solve the 49ers Viral Conspiracy Theory. I was familiar enough with their catalog that I never expected them to agree with my theory, but I did expect them to give it a fair hearing and to deliver their findings honestly. On both counts they came up short. They were not directly dishonest in anything they said, but rather in what they left out, in how what remained was cut, and in the picture painted by those two things in combination. They asked me to recorded the interview on my phone for better audio quality, and I held on to my copy for reference later. That turned out to be a fortuitous decision. Here is the raw audio of my first interview, unedited*. Only my side was recorded, so their questions aren’t on it, but you can generally infer them from the answers, and every claim I make below about what I said can be checked against my statements in this clip. (Note: Wendy had connection trouble at the beginning of the interview and was cutting in and out, which accounts for the false starts.) 0:00 -1:19:13 Audio playback is not supported on your browser. Please upgrade. Science Vs is a fun show. It is pitched at roughly a high-school understanding of science, for an audience that is skeptical, Snopes-oriented, and worried about misinformation. Take a claim circulating online, interview a supporter of the claim, interview consensus scientists, and then tell people which side of the line it lands on. I have listened to their episodes on raw milk, seed oils, 5G and other contested issues in the wellness space. I have problems with all of them, but each at least made an honest attempt to represent the actual range of scientific opinion by talking to credentialed scientists with differing perspectives. Dissenting researchers were heard from, answered, and often given a chance to respond. This episode did not do that. This article is not a relitigation of the science. I have written extensively about that already. This post is for the record. It is simply an accounting of what was wrong with their episode. Contents Is there a power plant next to the 49ers practice facility? — the clearest single example of getting something objectively wrong For the record — a high-level overview of all of the problems with their investigation Draw your own conclusions — why they had to make this episode at all What they left out about childhood leukemia — the exposure threshold, and playing games with statistics to minimize sick children What they left out about the mechanism — the body of literature they refused to cover, and evidence for the mechanism used against it The scientists Science Vs interviewed and did not air — four credential scientists who support myhe theory, recorded and cut, or not even called How they misrepresented me and my case — an answer severed from its question, and three telling edits How you would actually study the injuries — it doesn’t actually matter which team is the most injured, overall The theory: magnetic fields, oxidative stress, and collagen Since the episode never states my theory, here it is below. Those who are familiar with my work can skip this section. Electrical equipment produces magnetic fields, and those fields induce faint electrical currents in anything that passes through them, including people. My argument goes further than induced current. Mitochondria — the structures that generate a cell’s energy — run on continuous flows of electrons and protons, and those flows carry faint electromagnetic fields of their own. Maxwell’s principle of superposition shows that when two fields share the same space, they add together. An external field does not need to be strong to alter an internal field, it only needs to be present. The electron transport chain inside the mitochondria leaks a small fraction of its electrons by design, and those become reactive oxygen species — free radicals, which healthy cells use as signals. External magnetic fields cause the rate of leakage to change, increasing free radicals. When free radicals accumulate faster than the cell’s antioxidant systems can clear them, the result is oxidative stress. Oxidative stress is a recognized driver of chronic illness, including cardiovascular disease, neurodegeneration, diabetes and cancer, and it is in every medical school curriculum. One of its ordinary effects in connective tissue is that it switches on matrix metalloproteinases — MMPs, the enzymes that break collagen apart — while suppressing new collagen synthesis. Tendons are made of collagen. An athlete loading his soft tissue heavily six days a week is already creating oxidative stress in the tendons, so the addition of magnetic field exposure compounds the damage and inhibits repair, making him more susceptible to injury when enormous force lands on a tendon in a fraction of a second. That is the theory. We know that EMF causes oxidative stress, and we know that oxidative stress degrades collagen. The only thing missing is a study showing that direct connection. I have never claimed certainty that the substation is contributing to the elevated injury rate. I do believe it is likely, and I believe it warrants caution, and that a revenue machine like a major NFL team can easily afford to remove the exposure out of precaution. Is there a power plant next to the 49ers practice facility? Here is the clearest single instance of the problem with this episode. It requires no knowledge of electromagnetic fields at all. This story first came to me through Jon Feliciano, a former 49er, in an interview on Willard & Dibs on 95.7 The Game. Asked about why the 49ers are always injured, he said players used to joke that it was the power plant behind the practice fields. Wendy Zukerman corrects him on air. “It’s important to say that it’s not a power plant near the 49ers site.” Torre then asks her to explain the difference between a substation and a power plant. Her answer: a power plant generates electricity and transmits it to a substation, which converts the voltage into something your house can use and sends it on to your home or your business. There are two problems with that. The first is that there is a power plant on that site. The Gianera Generating Station is a natural-gas-fired peaker plant owned by Silicon Valley Power, and it has been there since 1986. I have published aerial photographs of the location from 1987 in which the gas plant is the only thing standing, before the practice facility was even there. I even mentioned the gas plant in my first interview. (Feliciano has since gone on record about this issue, and it is clear he had the substation in mind rather than the gas plant.) The second is that her definition describes a distribution substation, and the facility beside the 49ers is not that. It is the Northern Receiving Station, which takes in bulk power from outside the city’s grid and delivers it to distribution substations. Silicon Valley Power’s own map distinguishes receiving stations from substations, and Rose Rimler even reads the label out loud in the episode when she walks through that map on air. A few minutes before the map segment, Zukerman tells Torre: “like I said, we fact check everything.” Well, maybe not everything. I made a mistake On the morning of July 6th, at 10:20, I sent Rose and Wendy two studies. During the interview I had been asked which human studies show oxidative stress from electromagnetic fields, and I had not been able to name one on the spot. Rose emailed asking for the studies, I quickly searched for a couple, and I wrote that I thought these were the most relevant from that search. Unfortunately, I was busy and did not read either one closely at first. I picked them because they were topically relevant — one on substation workers, one on power plant workers. Neither were great studies, and their problems go past the ones raised in the episode. That was careless on my part. There is context that did not make the episode, though. Before that email I had been on a Zoom call with Rose talking about EMF and oxidative stress, and I pointed her to Dr. Henry Lai at the University of Washington, who has spent years aggregating the literature on this question. His tallies show that roughly 90% of studies since the late 1990s find oxidative effects from electromagnetic field exposure — hundreds of studies, systematically counted. Rose told me she was already aware of his work. So when she asked for studies, I understood her to have the aggregate view already and that she would report anything within that context. Not reading those two carefully was still a mistake, but the larger mistake was assuming the episode would be based on a thorough review of the actual body of literature, rather than on whatever I happened to send that morning. The second email At 1:49 that same afternoon — three hours and twenty-nine minutes after the first — I sent them a second email that I had been preparing for a while. It was a structured document in six numbered sections, written in response to a request they had made two weeks earlier, laying out my entire argument with citations attached to every link in the chain. The episode aired on August 13th, five weeks later, and not a single item from the second email is in it. Here is how it opens: The full email is included at the bottom of this post in Appendix B. Nearly 1,500 words in total. It contains two named mechanisms with the physics behind them. Occupational studies in humans. The literature on oxidative stress and collagen. A section addressing the strongest counter-evidence against my own theory, which I raised myself. And a closing section stating plainly what the theory cannot yet show. My entire argument, in writing, with detailed citations for every claim, provided to them five weeks before broadcast, and none of it made it into the episode. That is the single largest omission, but it is not an isolated one. The whole episode is riddled with similar problems, and the conclusion they came to is not merely a difference of opinion about the scientific evidence. Through omission and through strategic editing, Science Vs misinformed its audience — about what the evidence shows, about what I argued, and about who they spoke to. That is a notable outcome for a show whose stated purpose is correcting misinformation. For the record I am not going to tell you that Science Vs set out to discredit me, or that they had come to their conclusion before they reported the story, or that they used misleading editing to make me look like a man retreating from his own theory. I cannot know what was in anyone’s head, and I am not going to pretend otherwise, either. What I can tell you is what is on the record. They asked me for evidence and aired the weakest thing I sent. They interviewed three scientists who supported my theory and aired none of them. They discussed childhood leukemia without ever saying the exposure level at which it appears. And they took an answer I gave weeks before Ken Karipidis, the one EMF scientist who was put on air, was interviewed, and placed it directly after his critique, where it comes off as a major concession. A friend of mine who has worked as a journalist for thirty years read that last one and called it sleazy. I agree with her. Those are just the four issues that are impossible to defend as pure editorial decision, but they are not the only issues. The most glaring issues stem from what they left out: The exposure level at which the childhood leukemia association actually appears — three to four milligauss, a number the episode never states despite it being much lower than what I measured. The mechanism itself: The episode gets as far as “oxidative stress could weaken collagen,” which leaves it sounding like speculation, rather than a known pathway. The second email, and all the studies in it. Dr. Paul Héroux at McGill, whose work my proposed mechanism rests on, whose contact details I supplied, and who was never called. Dr. Beatrice Golomb at UC San Diego, who runs a research group on oxidative stress and mitochondrial function and has specific expdertice in collagen, interviewed and not aired. Dr. David Carpenter at Albany, the most prominent academic voice on the harm from magnetic field exposure, interviewed and not aired. Dr. Joel Moskowitz at Berkeley, interviewed and not even credited. The specific, testable condition I put in writing that would make me abandon the theory. My own unprompted statement of the theory’s evidentiary gap. My caveats about my own measurements. My ranking of EMF as one factor among several rather than the only one. The new equipment installed at those facilities between 2010 and 2014, and the sharp rise in system load from 2013 onward. But that is not all. What they kept, they selectively edited to serve a narrative that was not served by the raw transcripts of the interviews. A description of thousands of commercial routers in a workplace, reduced to the Wi-Fi in your house. My own acknowledgment, multiple times, that "I'm not a scientist" clipped in an episode that spends considerable energy pointing out that I am not a scientist. And a qualification I volunteered about my own measurements, cut from my answer and delivered later by their EMF expert as a correction. Together their edit produce a portrait of a wellness guy with Wi-Fi phobia and two bad studies, backing away from his theory the moment a “real” scientist looked at it. A practice facility where nothing changed because no new substation was built. Injuries written off as random because the 49ers were not quite the single most injured team in the league over the period in question. That portrait is false even though almost no individual statement made in the episode is. Draw your own conclusions At the top of the episode, Pablo Torre says his show had been flooded with requests to investigate the substation — that it was the thing they were asked to look into over and over again. Neither show went hunting for this story. It arrived from their own audience, in volume, and it could not be waved off. A thread I posted on X reached twenty-two million people. A guy with a gaussmeter and a brand-new Substack obligated a Pultizer prize winning program to spend an hour on a question about player health, that is considered fringe enough that most media operations won’t touch it. Pablo Torre Finds Out could not ignore it. So Science Vs came in and ran a “debunking” operation instead of an investigation. Everything below is what had to be left on the cutting room floor to deliver the “debunking”. They could not ignore it. So they tried debunked it instead. The demand was strong enough to force an episode, and since the episodes release the 49ers have sustained more injuries, including season ending ones, and interest has only grown. Demand from fans and playets is strong enough to force a better investigation from someone else. An omission is not a lie until you find out what was omitted. What follows is the detailed record so you can see the full picture. Draw your own conclusions. I have drawn mine. I am going to keep publishing. A note about Pablo Torre Finds Out After the episode aired I posted publicly, calling out Pablo Torre Finds Out for concerns I had about the integrity of their investigation, and about an interview directly with Pablo Torre which had been offered but never happened. I have since spoken with a producer at PTFO. The offer had rested on a misunderstanding about where things stood between us, and it fell away as the Science Vs part of the production widened past the science. He apologized for the miscommunication and I accepted. The producer also confirmed to me that they did essentially hand off the entire investigation to Science Vs for narrative purposes — so Pablo would be genuinely curious or potentially surprised by their findings — while still taking responsibility for what went out under their name. I appreciated the candor and the accountability, and I am comfortable with where we left things. So this post is not about PTFO. My disagreement is with Science Vs. What they left out about childhood leukemia Childhood leukemia appears at three milligauss. They gave no number at all. 1. They built an EMF ruler, then discussed childhood cancer without it. The sequence on air went like this: First I measured almost 9 mG, then I measured up to 50 milligauss. Torre reacts with concern — “that sounds high.” Cut to Karipidis: the public limit is 2,000 milligauss. Torre reacts again — “What happens at 2,000?” Karipidis explains that nothing happens at 2,000, that safety factors are built in. Then: at more than 50,000 milligauss you get flickers of light in the retina, and higher still, nerve stimulation. The listener now has a ruler (their ruler) to measure these numbers with. Fifty is nothing by their ruler. Then the episode turns to childhood leukemia and states, accurately, that there is a real association — but tellingly, they never give the exposure level at which that association appears. Childhood leukemia appears at three milligauss. They conveniently left that out. The pooled analyses that produced the World Health Organization’s carcinogen classification found roughly a doubling of childhood leukemia risk above three to four milligauss. That is the number that belongs in that segment, and it is more than ten times below the reading that had just been dismissed as trivial. I gave them that number myself, on tape, in the interview. Describing my own threshold, I said my comfort level for long-term chronic exposure is three to four milligauss, but preferably one. 2. Six children in thirteen million. The episode reports that these fields might explain one to four percent of childhood leukemias, then reframes it as a German estimate of perhaps six cases among thirteen million children. Torre, to his credit, is uncomfortable. What never gets explained is why that number is small. Almost no children lives above three milligauss in Europe. Fewer than two children in a hundred, in the Italian data. So even if the risk to those children doubles, the number of additional cases across an entire country stays small — not because the hazard is small, but because hardly anyone is exposed to it. Count the whole population and the few who are exposed disappear. And the reason hardly anyone is exposed is that siting rules keep housing away from transmission lines. In Europe, at least. The Dutch government has a standing precautionary policy against building new homes in any zone where the annual average magnetic field exceeds 4 milligauss — the same number the episode never mentioned. Denmark and Norway treat 4 milligauss as the level that triggers a look at mitigation. That is five hundred times below the ICNIRP figure quoted on air. The United States has no federal equivalent. That is evidence of infrastructure siting policy working. It is not evidence that there is no hazard. It is evidence that we already act as though there is one. If you listen to the raw audio you will hear that my proposed solution is EMF exposure is to build better infrastructure. What they left out about the mechanism 3. They accused me of cherry-picking, and then cherry-picked themselves. On air, Zukerman tells Torre that people who worry about electromagnetic fields dismiss the studies showing null results and collect the ones showing harm, and that this is why you have to be careful not to cherry-pick. They had two papers I had rattled off in a hurry, and a second email containing a carefully chosen set. They ran the two weakest, graded them on air, and presented the result as the state of the evidence for not only my theory, but the whole question of oxidative stress from magnetic fields. That is cherry-picking from my emails. The bigger picture is what they did with the literature as a whole. Zukerman acknowledges it exists, dismisses it, and disposes of it in a single stroke. You can go online right now, she tells Torre, and find scores of studies showing these fields increase oxidative stress. The issue, she says, is that they are not studies in people. Many of them are in people. The occupational studies in my second email are in people. That email had been in her inbox for five weeks. She waved off the literature on a factual claim that the documents in her possession contradict. (I have written separately about the evidentiary standard at work here). The effect was that they essentially baited me: ask the subject to supply the evidence, take the weakest thing he sends, and let that stand as a proxy for the whole argument. Wendy has been doing this show for ten years and clearly knows how to extract what she needs for her desired narrative. 4. They presented the collagen-improvement research as a gotcha, but I had already addressed it. The episode treats the existence of studies showing that EMF can improve collagen as a surprise that undercuts me, but I had pre-emptively addressed that five weeks earlier in the email they ignored. Those studies use measured, high-intensity pulsed dosing. The mechanism by which they work is oxidative signalling. The cell reads a controlled rise in reactive oxygen species as a warning, upregulates its antioxidant defenses, mounts a repair response, and the therapy stops before the system is overwhelmed. The key point is that it induces an oxidative response, which means those studies are actually evidence for my proposed mechanism, not against it. A field that produces a therapeutic effect cannot be biologically inert (which is the implication when they say “Nothing happens at 2,000 milligauss). Chronic ambient exposure is the same pathway with no off switch, and it is most consequential during the evening and while sleeping, when the body is in repair mode and the exposure does not stop. Section 5 of my email is titled What about the study showing improved collagen synthesis. I raised the counter-evidence myself, explained why I did not think it refuted the theory, and wrote that I was disappointed the question had not come up in the interview. That is worth holding against the cherry-picking charge in the item above: the studies they presented as inconvenient for me were studies I had gone out of my way to put in front of them. 5. Section 1 of my email stated a critical argument that was never put to the expert directly responsible for it. My email says the exposure limits exist to prevent acute effects and do not address chronic exposure at all, and that my dispute is with the entire framework. Zukerman gestures at this once. After Karipidis gives the 2,000 milligauss figure, she tells Torre that I would object because those levels do not capture “more subtle effects.” That is not my argument, and “subtle” is doing a lot of work here. My argument is that the limits are built to prevent acute effects — nerves firing, muscles twitching, etc — and were not designed to address chronic exposure at all. In fact, ICNIRP’s own documents state as much themselves. Mine is a structural objection to what the standard measures, reduced as a concern about subtlety, it becomes a matter of degree, rather than a categorical difference. They interviewed Ken Karipidis, vice chair of ICNIRP — the body that writes those limits. He was asked what the limit is, but he was never asked how it applies to chronic exposure. The scientists Science Vs interviewed and did not air 6. They interviewed four officials of the standards body. The episode credits roughly a dozen researchers. Four of them are associated with ICNIRP. Ken Karipidis is the vice chair. Rodney Croft chaired ICNIRP from 2020 to 2024 and led the development of its current guidelines. Dan Baaken is ICNIRP’s scientific secretary. Frank de Vocht sits on the Main Commission. One of them speaks in the episode. Their institution’s position is more than adequately represented — the 2,000 milligauss figure, the safety factors, the assurance that nothing happens below the line. 7. The four who were left out. Dr. Beatrice Golomb is Professor of Medicine at UC San Diego — a physics undergraduate degree, a PhD in biology, an MD. She directs a research group whose stated focus is the relationship between oxidative stress, mitochondrial function and health. That is the mechanism the episode spent its first half dismissing. Her published work includes the fluoroquinolone case series behind the FDA’s black box warning on an antibiotic class that ruptures tendons, where the accepted mechanism is oxidative stress and mitochondrial toxicity — the back half of my chain, already on a drug label. She is in the credits. She is not in the episode. She has told me she finds my theory biologically plausible, and that she has a recording of her interview. Dr. David Carpenter directed the Institute for Health and the Environment at the University at Albany for decades and is the most prominent academic voice arguing these fields cause harm. Childhood leukemia is the reason these fields carry a WHO classification at all, and Carpenter is the person you call if you want that case made by someone who has spent a career on it. He is in the credits. He is not in the episode. He has told me that when he was interviewed they could not have been less interested in what he had to say. Dr. Joel Moskowitz directs the Center for Family and Community Health at UC Berkeley’s School of Public Health. He told me directly that they interviewed him and that he thought it went well. He does not appear in the episode, and unlike Golomb and Carpenter, he does not even appear in the credits. Dr. Paul Héroux at McGill is the researcher whose work provides the foundation for the oxidative stress mechanism my theory rests on. I gave Rose his email address and phone number. He was never interviewed. They never even called him. 8. “He’s not a scientist.” The episode leans hard on the fact that I am not a credentialed scientist. Zukerman says it. Torre repeats it. “At all.” Having built a segment on that, they then left out the physicist-biologist-physician, the professor of public health, the director of a university environmental health institute, and the McGill researcher whose work the primary mechanism comes from. They spent the episode telling their audience I am not a scientist, and then kept four actual scientists who support the theory off because their argument does not survive otherwise. How they misrepresented me and my case 9. They played my words as a response to an interview I had never heard. Near the end of the hour, Zukerman says she went to me and told me the evidence was lacking. Then she plays me saying I am not wedded to it being an EMF, that I have staked my reputation on it needing more study, and that I am not certain of anything. That segment was placed immediately after Karipidis had finished taking the cherry-picked papers apart. It plays as a man folding under expert scrutiny. Commenters have used it against me since, but it is incorrect. Here is the sequence as it happened. I was interviewed. Karipidis was interviewed weeks later. I was never told what he said, or even who he was. I was never asked to respond to it. I did not know his name until the episode aired. That is not a simple editing decision. That is a quote from one interview, moved to follow a critique from a different interview it was not a response to, so that it would land as a concession. A friend of mine who has spent thirty years as a journalist read that sequence and called it sleazy. She is right. The full passage is reproduced in Appendix A, and it is worth reading. What airs is the preamble. Four paragraphs later I say “to directly answer your question” — and that answer, about what would change my mind if the team relocated, is not in the episode. Neither is the sentence two paragraphs on, where I say the EMF might turn out to be ten percent of the problem. I will say the underlying point again, though, because I meant it and I still do. I am not wedded to my theory that magnetic fields from the substation are contributing to the 49ers injuries. I could be wrong. What I am wedded to is the process of scientific inquiry, and the fact that we should be cautious around these exposures and we need more independently funded studies. 10. Three telling edits. They cut “I’m not a scientist” mid-sentence. What I said: “...and I am not certain of anything. I’m not a scientist. To me, I find the mechanisms compelling. I will go back to the fact that I got into this not because of the 49ers, but because of clients I was working with who suffer from EDS...” What aired: “...and that I am not certain of anything. I’m not.” The clip ends on the first two words of the sentence in which I say I am not a scientist, in an episode that spends considerable energy establishing that I am not a scientist. The full sequence is in Appendix A. They cut my own description of my work. Asked what I do, I said I run a wellness business, that I am focused on writing software to help people navigate environmental stressors, that environmental health is my focus, and that I also do independent journalism and research. What aired is the wellness business and the environmental health, with the software and the journalism removed from my own answer. The software engineering does come up later — narrated by them, as a hacker who grew up to write firmware — but my current work, in my own words, arrives as “wellness guy.” Thousands of commercial routers became home Wi-Fi. What I described: working at a wireless networking company surrounded by thousands of Wi-Fi routers, and a stress-induced health collapse afterward that working in that environment contributed to. What aired: Wi-Fi, the kind you have at home — reinforced by a clip of Christian McCaffrey talking about turning his router off at night. Three cuts, and every one of them makes me seem less credible. That is not a coincidence. 11. I gave them my own caveats and the test that would disprove me. In the first email I wrote that a well-designed chronic, ambient-level exposure study in tendon showing no collagen degradation, run over many months, would undercut my confidence in the theory. That is a specific, testable condition, stated in advance and in writing. There was a second interview, weeks later, which was not used in the episode, but in that I asked again for the falsification criterion to be included. What the episode presents instead is a man saying “we need more study,” which reads as a hedge, an open-ended request for the benefit of the doubt. It is the opposite of a hedge. Section 6 of my second email says, unprompted, that as far as I am aware there is not a single study showing EMF-driven oxidative stress degrading collagen in a human in vivo or in human tendon in a lab. I wrote that because it is true and because it is the first thing anyone should check. Under their standard it becomes the hinge of the entire first half, framed as something they had to surface without my cooperation. I had handed it to them five weeks earlier. And in the interview I said that my 25 to 50 milligauss readings were taken at knee level, and that these fields attenuate quickly, so by the time it reaches your head it is not that high anymore. That did not air either. The qualification arrives later, from Karipidis, as a correction. How you would actually study the injuries 12. They measured the wrong thing. The episode spends its final act on whether the 49ers are the most injured team in the NFL, finds no clean ranking, and lands on “injuries are random”. That is the wrong test. You would define the exposure — measured field levels at the facility — and the outcome narrowly: soft-tissue injuries, not a single MSK injury count that a broken finger and a ruptured Achilles both land in. Then you would compare the 49ers to themselves before and after the exposure changed, and compare that change against every other team over the same window. That controls for league-wide shifts in rules, turf and training load. It is a difference-in-differences design, and it is standard. I sent them that argument on July 28th, in writing, along with the fact that in eleven of the past twelve seasons the 49ers had finished top ten in Adjusted Games Lost. And by the episode’s own reporting, the 49ers are second in games lost to injury over the past decade, with FTN’s Aaron Schatz confirming that once you adjust for starters they come out second worst in the league — after having been one of the healthiest teams for years before that. A finding like that is where an investigation starts, not where it stops. 13. I did a lot of substation research for the episode that was never aired. I had reported that the substation next to the facility was expanded in 2014. That was wrong, and Rose Rimler and I sorted it out together. They gave me credit on air, which I appreciated, but framed it as a concession on my part to something they had found. In fact I had been investigating it myself, was uncertain before they asked, but was waiting for clarification from Silicon Valley Power. The uncertainty centered around a substation named “Esparanca” that was proposed right behind the facilities as part of the stadium construction, but now appears to never have been built. I spent days in Silicon Valley Power’s records, and did eventually reach Silicon Valley Power for confirmation and indentified the mistake myself. I also gave them highly detailed documents on what we do know about those facilities: new equipment installed between 2010 and 2014, and load growth across the system with an inflection around 2013–2014, with the Northern Receiving Station carrying the highest capacity in the system and sitting closest to the data center corridor. None of that is in the episode. I have a separate piece about it coming out soon. *I cut 2 seconds from the raw audio to remove personal information that had no connection to anything in the episode. Appendix A: the passage the clip was taken from This is the sequence from my first interview, in full. The episode uses one fragment of it. It’s tricky because my understanding is that there’s something like a 15-year half-life on collagen remodeling issues. They’re going to get a new crop of players. What I really need, though, is for the injuries to be broken down so we can see the soft tissue injuries. Right now, they’re categorized as MSK injuries, but let’s say we can actually identify them more specifically. Is that right? He was able to do that? Oh, cool. I wasn’t able to find that information. Interesting — I didn’t know that data existed. I tried so hard to get it, and I didn’t know it was available. Maybe you could connect me with that person. That would be amazing. I’m not wedded to it being an EMF, honestly. I’m not. I would say that, to a certain extent, I’ve staked my reputation on the fact that it needs more study. It’s important to look into it, and I am not certain of anything. I’m not a scientist. To me, I find the mechanisms compelling. I will go back to the fact that I got into this not because of the 49ers, but because of clients I was working with who suffer from EDS, Ehlers-Danlos Syndrome, a tendon hypermobility issue. This condition is documented to be partially caused by oxidative stress. I’ve worked with them to mitigate their EMF exposure and have seen people improve. I think it’s a bigger story. In a way, the 49ers represent an occupational cluster with specific exposure risks. If someone would conduct a study on this, I believe we could learn a lot. Perhaps we would discover that it’s like, okay, maybe it’s 10% of the problem. I don’t know the exact number, but I think either way, conducting the study would provide valuable insights. To directly answer your question, it’s challenging for me because it’s part of a bigger story. If the 49ers move and stop having injuries, I might conclude that it was related to the substation. However, if they move and still experience injuries, I would want to analyze the nature of those injuries. Are they primarily soft tissue injuries? I don’t think it’s necessarily a case closed, but the story might lose traction at that point regardless. Three things are worth noting. The aired fragment stops immediately before the sentence in which I say I am not a scientist — the cut described in item 10. It also stops four paragraphs before the words “to directly answer your question.” What the episode plays is the throat-clearing. The actual answer, about what would change my mind, never airs. And two paragraphs in, I say the EMF might turn out to be ten percent of the problem. That is the ranking the episode says I never gave. Appendix B: the full email, July 6th, 1:39 PM Hi Rose, You asked me to send you some studies a couple of weeks ago. I apologize for the delay. I have been incredibly busy. I also wanted to give you a chance to dig in yourself, and get your own perspective before I influenced you too much with mine. That said, I do want to make sure that the actual argument is abundantly clear, so here it is! One note before I begin, there are really two separate questions here: Does the substation cause the soft-tissue injuries? That was my specific claim, and what the podcast is about. Is the theory biologically sound? Can 50/60 Hz fields at these levels do anything biological below the safety limits? Question two is why people have been calling me a conspiracy theorist. The regulatory and advisory bodies (ICNIRP, etc) maintain that anything below their exposure limits is biologically inert, and that position is broadly accepted within the mainstream, but the actual science paints a different picture. To defend my theory I’ve had to defend a much larger claim: that the advisory bodies have the biology wrong. I can’t honestly answer question 1 without first addressing that. Here’s is a simplified outline of my theory, with links to studies: 1. Advisory body thresholds for biological effects The ELF magnetic-field limits (ICNIRP’s ~2,000 mG public / 10,000 mG occupational) exist to prevent acute effects from exposure. If a magnetic field is strong enough, it makes nerves fire and muscles contract. Muscles twitch. You can see faint flashes of light in your vision. People can even feel tingling or even a shock. That happens due to Faraday’s law, which states that a time-varying magnetic field induces an electric field inside the body via the creation of Eddy currents.The standards assume that those currents do nothing below the twitch threshold. They do not consider chronic effects at all. My argument is that they are biologically active and do have chronic effects. 2. There are multipe ELF-EMF mechanisms for inducing oxidative stress. This is basic biophysics. Below are the two primary mechanisms. Simplest first. Dr. Paul Héroux of McGill has the most intuitive explanation, which rests on Maxwell’s principle of superposition: because Maxwell’s equations are linear, two sets of electromagnetic waves sharing the same space simply add together. In the interview I pictured a pebble dropped into a pond, sending out clean ripples. Then a boat motors past at distance, sending larger waves, and where they meet the ripples, the two add together and the original pattern gets distorted. In our cells, the mitochondria run on continuous currents of electrons and protons that carry their own faint electromagnetic fields. An external field from a substation, by the principle of superposition, adds to those internal currents and shifts the pattern. The electron transport chain in the mitochondria leaks a fraction of its electrons by design as reactive oxygen species (ROS), which act as signalling molecules in a healthy cell. Distorting that field increases that electron leakage, creating oxidative stress. A tiny electromagnetic interference results in a large downstream effect. https://www.sciencedirect.com/science/article/pii/S2405844025006474 The more complex pathway is Dimitris Panagopoulos’s Ion Forced-Oscillation / Voltage-Gated Ion Channel (IFO-VGIC) mechanism. Weak, polarized, low-frequency fields force the ions (calcium, potassium, sodium) next to an ion channel’s voltage sensor to oscillate; because that force scales with the inverse cube of the distance involved, fields far below the stimulation threshold can still force the channel open, disrupting the cell’s ion balance and driving ROS overproduction (Nitric oxide and superoxide interact and produce peroxynitrite, a highly unstable cytotoxin that breaks down into free radicals). https://www.researchgate.net/publication/366088934 https://www.spandidos-publications.com/ijo/59/5/92 https://www.mdpi.com/1422-0067/22/18/10041 https://www.frontiersin.org/journals/public-health/articles/10.3389/fpubh.2025.1585441/full https://pmc.ncbi.nlm.nih.gov/articles/PMC3772193/ 3. Evidence of oxidative stress, in vivo, in humans from ELF-EMF There are many studies, and the strongest are occupational, which applies to the 49ers situation. 115 power-plant workers vs. 145 office controls. Serum malondialdehyde (MDA, the standard lipid-peroxidation marker), superoxide dismutase, and catalase were all significantly higher in the exposed group, and the markers rose with increasing field exposure. https://journals.sagepub.com/doi/abs/10.3233/WOR-203244 A follow-up where they reversed the oxidative stress in power plant workers. A double-blind randomized controlled trial: 91 power-plant workers given vitamin E, vitamin C, both, or placebo for 90 days. The antioxidant groups showed reduced lipid peroxidation and raised antioxidant capacity versus controls. https://pubmed.ncbi.nlm.nih.gov/32191586/ A spot-welder study: 46 welders occupationally exposed at 50 Hz, showed significantly altered red-blood-cell antioxidant enzyme activity and concluded ELF-MF “might act as an oxidative stressor… even at the recommended levels of exposure.” https://pubmed.ncbi.nlm.nih.gov/18504600/ A substation-specific study found oxidative stress and DNA damage https://pubmed.ncbi.nlm.nih.gov/24460415/ 4. Oxidative stress degrades collagen This half isn’t controversial at all. Oxidative stress activates the matrix metalloproteinases (MMPs) that break collagen down and suppresses its synthesis. Here are three example studies: Siwik et al. 2001: Oxidative stress raises MMPs and lowers collagen synthesis in cardiac fibroblasts. https://pubmed.ncbi.nlm.nih.gov/11121376/ Fisher et al. 2009: Collagen fragmentation drives oxidative stress and elevates MMP-1 in aged human skin. https://pmc.ncbi.nlm.nih.gov/articles/PMC2631323/ Varani et al. 2006: Decreased collagen production in oxidatively aged skin. https://pubmed.ncbi.nlm.nih.gov/16723701/ 5. What about the study showing improved collagen synthesis I’m glad you asked this question, and I’m bummed we didn’t get to it in the interview because it is a great question, and very important to understand. Superficially it may appear to be a refutation of my theory, but I would argue that it actually supports the underlying argument. That study used a short, high-intensity pulsed dose: therapeutic-PEMF, the same type of field used clinically to stimulate bone and tissue healing. The reason this works is because it triggers the very same biological pathways that can lead to oxidative stress. The exposure still stimulates ROS production, but done at a controlled dosage, for a limited duration it has a different effect. The cell reads the ROS as a warning signal and it upregulates its antioxidant defenses, and mounts a repair/proliferation response. The therapy is then stopped before the cell gets overwhelmed. That is essentially a hormetic response: a small dose of a stressor producing a beneficial adaptation. Two things follow: At the very least, this means the field is biologically active, which by itself undercuts the regulatory claim that these fields are inert below their thresholds. There is a wealth of literature on PEMF (pulsed EMF) bone regeneration and calcium channel signalling (which is the second mechanims in section one). Here is one. https://www.nature.com/articles/srep13856 At best, it leads us straight to my actual concern, which is that under chronic, chaotic and unregulated exposure, the cell’s antioxidant capacity gets overwhelmed, resulting in oxidative stress. There are plentiful examples of things that are beneficial at controlled doses, but harmful at uncontrolled doses. Excecise is one obvious, uncontroversial example. Botox is perhaps a more interesting example. 6. What about a study that shows EMF causing collagen degradation in humans? As far as I am aware there is not a single study showing EMF-driven oxidative stress degrading collagen in a human, in vivo, or in human tendon in a lab. There are studies involving isolated fibroblasts though, which secrete collagen. The most relevant one showed that human fetal scleral fibroblasts exposed to 50 Hz ELF-EMF showed a significant decrease in collagen synthesis and that MMP-2 expression was upregulated, which is the exact mechanism I described in section 2. https://pmc.ncbi.nlm.nih.gov/articles/PMC3626379/ That’s it! Thanks again for the interview. Best, Peter Anthony Cowan Environmental Health · Wellness Tech · Researcher & Journalist Publisher & Editor, Living Energy Bio: petercowan.comSocial: X · Instagram · TikTokApp: sunlightis.lifePhone: [redacted]
Trump administration begins building border wall in Big Bend region of Texas
The start of construction marks an important milestone in the administration's $46 billion plan to line the border with walls, barriers, roads and technology as it seeks to make good on a key campaign promise by Trump to finish the wall.
Novant Health drives $4.33B in regional economic impact, study says
Novant Health Coastal Region generates an annual overall economic impact of $4.33 billion in the Wilmington Metropolitan Statistical Area (MSA), according to a new report. Commissioned by Novant Health and conducted by Mouhcine Guettabi, associate professor of economics at the University of North Carolina Wilmington and the area’s regional economist, the report evaluates population growth in New Hanover, Brunswick and Pender counties and whether the area’s healthcare infrastructure is positioned to meet the region’s demand. According to the study, while healthcare employment has kept pace with population growth in New Hanover and Pender counties, it has not kept up with the rapid population growth in Brunswick County, which is skewed toward an older population. “It points very clearly to Brunswick County being the bottleneck, or being the place where investment is most needed,” Guettabi said to the Business Journal Friday, “because the growth is the fastest, the composition of the growth is older (adults) and demand for healthcare is much higher for the subpopulation.” The Novant Health Coastal Region employs 8,295 full-time equivalent workers, according to the report, and is the region’s largest employer. Overall, through direct, indirect and induced impacts, the Novant Health Coastal Region supports 19,573 jobs, the report said. Using data collected from internal payroll, financial and capital reports, the report estimates that Novant Health Coastal Region pays approximately $1.15 billion in total compensation to its employees. According to the study, the provider’s annual operating expenditures, or direct economic impact, total $2.36 billion. That direct impact ripples through the regional economy through spending at its suppliers, or indirect impact, and household spending by staff and its suppliers’ workers, or induced impact. The report estimates the Novant Health Coastal Region’s indirect economic impact is $786 million, reflecting the multiplying effect of the provider’s operating expenses on expenditures like medical supplies, facilities, food, IT and professional services. Because 86.9% of Novant Health Coastal Region employees live within the tri-county region, the report estimates that wages paid by Novant circulate into the regional economy, creating an induced economic impact of $1.17 billion. “That money just doesn’t go into thin air,” Guettabi said of the wages paid to Novant Health Coastal Region employees. “Some of that money is being re-spent, and therefore it’s supporting grocery stores, hiring, restaurants and bars, and there are a lot of other companies or organizations whose employment, whose activity partially depends on that.” The combination of direct ($2.36 billion), indirect ($786 million), and induced ($1.17 billion) impacts totals an estimated $4.33 billion, according to the report. A study commissioned by Novant Health in 2024 and conducted by FTI Consulting’s Center for Healthcare Economics and Policy found that Novant Health generated nearly $2 billion of direct impact, with $628 million in indirect impact and $857 million in induced impact. Healthcare investments in the pipeline for Brunswick County Additionally, the study found that while healthcare employment has kept pace with population growth in New Hanover and Pender counties, it lags in Brunswick County. “Once you go below the metro level and you decompose the three counties that make up the Wilmington Metro,” Guettabi said, “it becomes fairly clear that Brunswick is the standout. And not only that, but clearly the growth there is fully domestic migration and largely retiree-driven migrants.” Using data from the Centers for Medicare and Medicaid Services on per-capita healthcare spending among age groups, Guettabi estimates that adults aged 65 and older demand 2.44 times the healthcare of working-age adults. “The share of the population in Brunswick County that’s over the age of 65 is 33%,” Guettabi said, “which is so much higher than the average share of people over the age of 65 within the state or within the country.” The report emphasizes that Brunswick County is the “strongest candidate” for new healthcare investment, adding that patient discharge records show Brunswick residents rely heavily on facilities in New Hanover County for inpatient care. “Investments in Brunswick County would not only meet the demand for those residents, but it would also relieve pressure for New Hanover County residents,” Guettabi said. Laurie Whalin, president of the Novant Health Coastal Region, told the Business Journal Friday that the provider plans to expand services at Novant Health Brunswick Medical Center, in addition to other investments in the area. In April, the state granted conditional approval to both Novant Health and Columbus Regional Healthcare System to build new hospitals, just miles apart, on either side of the Columbus County and Brunswick County borders. Columbus Regional’s $214 million 30-bed hospital would be located at the former Acme-Delco Middle School in Delco, according to the application. The project’s approved timetable has construction slated to finish in May 2029, with the hospital open for service by October 2029. The Whiteville-based provider, which Atrium Health manages, broke ground on an Advanced Care facility in December 2025 and operates four specialty clinics in Leland. Meanwhile, Novant Health’s proposed $251 million 20-bed hospital would be built just miles from Columbus Regional’s proposed hospital, near the Compass Pointe community in Leland. The provider estimates the hospital will open by 2030. State officials also approved Novant Health in March to build a freestanding emergency department in Carolina Shores, near U.S. 17. The project is estimated to cost $24 million, according to the application, and will operate under the Novant Health Brunswick Medical Center license. Additionally, Novant Health’s 16,000-square-foot ambulatory surgery center is slated to open in Leland by year’s end, officials said.
Trump administration begins building border wall in Texas’ Big Bend region
The start of construction marks an important milestone in the administration's $46 billion plan to line the border with walls, barriers, roads and technology as it seeks to make good on a key campaign promise by President Donald Trump to finish the wall.