SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " FIFTH " 673 found 🔀 AI-powered Shuffle
Fauci invokes Fifth Amendment in heated COVID-19 Senate hearing
Physician declines to answer Senate questions as Republicans like Rand Paul accuse him of covering up COVID's origins.
Fifth Annual Sports Medicine Symposium Held
The 5th Annual McLeod Sports Medicine Symposium was held on Monday, July 27, 2026, from 8 a.m. to 12 p.m. at the McLeod
Anthony Fauci Finally Turns Down an Interview Request
The doctor, not known to shy from a spotlight, invoked his Fifth Amendment rights rather than answer loaded questions from Senate Republicans.
Sam Smith Makes Major Announcement About Their Love Life
The British singer-songwriter’s announcement comes just weeks before the release of their fifth studio album, “Hazel Eyes.”
Grant Thornton to acquire CBIZ for nearly $3 billion
The combination would establish the fifth-largest accounting firm in the U.S.
Fauci invokes Fifth Amendment, declines to testify in COVID-19 Senate hearing
In his opening statement, Fauci said Paul has an "obvious obsession with calling for my prosecution"
Dr. Anthony Fauci pleads the Fifth to avoid Senate questions about Covid pandemic
Dr. Anthony Fauci, who led the US government response to the Covid-19 pandemic, invoked his Fifth Amendment right against self-incrimination, refusing to testify Wednesday just minutes into a Capitol Hill hearing that Republicans outwardly hoped would undermine the scientist and open him to claims of perjury.
Fifth Third Receives 'World’s Top Disability Inclusive Business’ Recognition
CINCINNATI, July 27, 2026--Fifth Third (NYSE: FITB) has been named a World’s Top Disability Inclusive Business by The Disability Index®, recognizing the Bank’s ongoing commitment to creating opportunities for individuals with disabilities through inclusive workplace practices, accessible banking solutions and community partnerships.
Tadej Pogacar opens door to Vuelta participation after making more Tour de France history
Pogacar secured a record-equalling fifth yellow jersey but is yet to taste Vuelta success
Daniel Cormier: Magomed Ankalaev Next for 205 lbs Title Shot
UFC commentator Daniel Cormier believes that Magomed Ankalaev has done enough to get another title shot at 205 lbs.Ankalaev defeated Bogdan Guskov via fifth-round TKO in the main event of UFC Abu Dhabi to get back into the win column after losing the UFC light heavyweight title in his last fight to Alex Pereira at […] The post Daniel Cormier: Magomed Ankalaev Next for 205 lbs Title Shot appeared first on HEAVY.
Matches To Make After Busy Combat Weekend
UFC Abu Dhabi went down yesterday (Sat., July 25, 2026) inside Etihad Arena (a.k.a. Fight Island) in United Arab Emirates which saw Magomed Ankalaev stop Bogdan Guskov in the fifth and final round of their Light Heavyweight main event (highlights). But UFC wasn’t the only show on during a busy sports weekend that also included […]
Wildfire Disruptions to the Tour de France Show How Climate Change Is Shaping Sports
Tadej Pogačar's fifth Tour de France victory came after last-minute course changes due to wildfires, underscoring how climate change is influencing major sporting events.
California leaders split over war in Iran
California lawmakers and leaders are divided over the war in Iran, now in its fifth month, as debates over funding and presidential authority continue in Washington D.C.
Carlos Ulberg Reacts to Magomed Ankalaev’s UFC Abu Dhabi Win
UFC light heavyweight champion Carlos Ulberg reacted to Magomed Ankalaev’s win at UFC Abu Dhabi over Bogdan Guskov.Ulberg was cageside when Ankalaev finished Guskov in the fifth round of their UFC Abu Dhabi main event. Although it wasn’t the most exciting fight to watch, it was no doubt a very dominant win by Ankalaev, who […] The post Carlos Ulberg Reacts to Magomed Ankalaev’s UFC Abu Dhabi Win appeared first on HEAVY.
Magomed Ankalaev Calls Out Next UFC Opponent
Former UFC light heavyweight champion Magomed Ankalaev called out his next opponent following his victory at UFC Abu Dhabi.Ankalaev defeated Bogdan Guskov via fifth-round TKO in what was a flawless victory at UFC Abu Dhabi. Though the fight wasn’t exactly exciting to watch, Ankalaev did what he needed to do to defeat Guskov and get […] The post Magomed Ankalaev Calls Out Next UFC Opponent appeared first on HEAVY.
Reds try to prolong win streak, play the Cardinals
Cincinnati Reds (48-54, fifth in the NL Central) vs. St. Louis Cardinals (52-51, fourth in the NL Central) St. Louis; Saturday, 7:15 p.m. EDT PITCHING PROBABLES: Reds: Hunter Greene (2-1, 6.06 ERA, 1.16 WHIP, 26 strikeouts); Cardinals: Andre Pallante (10-6, 4.02 ERA, 1.26 WHIP, 75 strikeouts) LINE: Cardinals -150, Reds +122; over/under is 8 runs BOTTOM LINE: The Cincinnati Reds are looking to keep their three-game win streak alive when they visit the St. Louis Cardinals. St. Louis has a 26-28 record in home games and a 52-51 record overall.
NASA programs feel effects of workforce reductions
More than two dozen major NASA projects say they have been affected by the loss of a fifth of NASA’s civil servant workforce in the last year.
Borderlands 4 DLC ‘Story Pack 2: FL4K and the Last Resort’ launches September 10
Borderlands 4 downloadable content “Story Pack 2: FL4K and the Last Resort” will launch on September 10 alongside the game’s fifth “Bounty Pack,” publisher 2K and deve…
The Morning Show heads off into the night.
Apple announced that one of its biggest early hits will be coming back for a fifth and final season in 2027. The Morning Show premiered alongside Apple TV as one of its prestige plays, with a notably star-studded cast. The news comes the same day Apple announced a new dating series. [Image: https://platform.theverge.com/wp-content/uploads/sites/2/2026/07/072226_The_Morning_Show_Fifth_Final_Season_Announcement_Big_Image_02.jpg?quality=90&strip=all]
Cow visit brings food science lessons to life for Rice summer campers
Nearly 30 fourth and fifth grade students got a firsthand look at where milk comes from July 16 when a dairy cow named Luna visited Rice University as part of the Center for STEM Engagement’s new C.H.E.F. Lab (Creating Hands-on Experiments in Food Science).
Fifth Legionnaires’ death confirmed as dozens of NYC buildings found with live bacteria
Tuesday marked the fifth consecutive day a death had been reported by NYC health officials. A total of 82 people have been sickened by the illness.
Fifth person dies in Legionnaires' disease outbreak in NYC neighborhood
The New York City health department said it has identified at least 82 cases of the disease in an outbreak in the Upper East Side of Manhattan.
Fifth Legionnaires' death confirmed as dozens of NYC buildings found with live bacteria
A fifth person has died as a result of a Legionnaires’ disease outbreak in Manhattan, the health department said, which also shared that dozens of buildings were found to have live legionella bacteria in their cooling towers.
Fifth person dies in Upper East Side Legionnaires’ outbreak
As of Tuesday, there had been 82 reported cases of Legionnaires’ disease associated with the outbreak.
Shaky political "science": breakdown of the peer review process
[This article is the latest in our “Shaky Political Science” series. In our 38 page report, “Shaky political ‘science’ misses mark on ranked choice voting,” released in December 2025, we examined over 40 studies focused on ranked choice voting (RCV). Many of these studies suffered from puzzling research methodologies, poorly constructed surveys, unrealistic simulated elections, cherry picked data and faulty analyses that often were contradicted by results from real-world elections (a link to our full paper is here). Here are links to the first four articles in our series: the first one summarizing the overall results of our report; the second one analyzed a study co-authored by University of Minnesota academic Larry Jacobs, which was one of the most error-prone of all the research we reviewed in our report; a third article showing an admirable example of two political scientists holding two other political scientists accountable for their flawed, sloppy research; and a fourth article that analyzed seven studies sponsored by New America’s political reform program that deployed flawed methodology based on “simulated” elections instead of real-world elections, which when combined with some basic misunderstandings of RCV, produced odd and misleading results]. In this fifth article in our “Shaky Political Science” series, we examine two flawed studies on the impact of RCV on voter turnout authored by San Francisco State University professor Jason McDaniel. McDaniel’s research in these two papers stands out for its puzzling methodology, inadequate and cherry-picked data, and faulty analyses that not only misunderstands ranked choice voting but reflects a basic misunderstanding of politics in general. The first of the McDaniel studies actually passed through a peer review process and then was subsequently published by the Journal of Urban Affairs, despite its obvious errors. It is perplexing that a jury of peer political scientists did not catch the errors and send it back to McDaniel for a rewrite or outright rejection. This calls into question the credibility of the peer review process itself. The peer review process is supposed to represent the intellectual pinnacle of the profession – a way for academics to certify the quality of each other’s work, and to act as a check against sloppy research. In the case of the McDaniel study, the peer review process failed. Yet his flawed study has been cited dozens of times by other political scientists in their own flawed works — an unvirtuous circle of academic research. Here is the first Jason McDaniel study that we analyzed: “Writing the Rules to Rank the Candidates: Examining the Impact of Instant-Runoff Voting on Racial Group Turnout in San Francisco Mayoral Elections,” by Jason McDaniel, 2016, Journal of Urban Affairs. This study covered San Francisco’s use of ranked choice voting (RCV) in mayoral elections, purporting to show that RCV reduces voter turnout overall, increases voter errors, and has a negative impact on “marginal populations,” i.e. racial minorities, mainly as the result of the alleged complexity of RCV asking voters to rank candidates and having to be familiar with multiple candidates and related dynamics. McDaniel reached these conclusions by examining five San Francisco mayoral elections taking place in odd years (i.e. where there are no federal or state races on the ballot) from 1995 to 2011, comparing three earlier non-RCV races (in 1995, 1999 and 2003) with the later two RCV races (in 2007 and 2011). Only two RCV races were studied, and as McDaniel acknowledged, only the contest in 2011 was “competitive” (that contest in 2007 was the first mayoral election using RCV, and incumbent mayor Gavin Newsom won easily in the first round of counting, earning 74% of first choices and far ahead of the second place candidate who had just 6.3% of first choices). Yet even the allegedly competitive contest in 2011was won by an incumbent with a landslide margin of nearly 20 points. No other elections were studied by McDaniel, even though San Francisco elects 17 other offices besides mayor with RCV, including the 11 seats on the Board of Supervisors (the name for the city council) in even years, and six other citywide offices in odd years. Previous academic research has found that competitive elections can stimulate greater voter involvement and higher turnout. For unexplained reasons, this study ignored at least 34 other RCV races between the years 2004 to 2011, many of which were very competitive and had high voter turnout. Instead, McDaniel’s analysis based its conclusions on data from only a single, marginally-competitive mayor’s race using RCV. These 2007 and 2011 mayoral elections were the only two RCV elections that McDaniel used as the sole basis for his small data set to determine the impact of RCV on voter turnout. Despite having no meaningful data to inform his study, McDaniel nonetheless concluded that RCV lowered turnout when compared to the previous three mayoral non-RCV elections using two-round runoffs. Then, using the same inadequate database of San Francisco elections, McDaniel also found that “Instant-runoff voting is associated with a significant decline in Black voter turnout and White voter turnout…On average, Black voter turnout decreases by 18 points and White voter turnout decreases by 16 points …” But how could he credibly arrive at that conclusion when his study was based on voter turnout in two RCV contests that were not even remotely competitive? Beyond that, McDaniel tacitly admits that the key determining factor driving Black voter turnout was not RCV vs non-RCV elections, but the presence of a viable Black candidate. McDaniel wrote, “Black voter turnout was about 17 percentage points higher for the two elections that featured an African American candidate compared to the three elections that did not” — but one of those three elections did not use RCV. The same dynamic was present for White voter turnout, in which higher turnout was not correlated with RCV vs non-RCV elections, but the presence of a viable White candidate. Beyond that, McDaniel’s voter turnout results, whether correlated with the race of the candidates or RCV vs non-RCV elections, showed no clear patterns. In his Figure 1, he shows low Asian voter turnout in the non-RCV elections in 1999 and 2003 when there was no viable Asian candidate running, but in the 2007 mayoral election using RCV, there is still no viable Asian candidate, yet Asian turnout increases dramatically. For Latinos, voter turnout is virtually the same in 1999 (no viable Latino candidate, non-RCV elections), 2003 (leading Latino candidate, non-RCV elections), 2007 (no viable Latino candidate, RCV elections) and 2011 (leading Latino candidate, RCV elections). Meanwhile White voter turnout increased dramatically from a low in the 2007 mayoral election, in which the leading candidate was a white incumbent, to the 2011 election in which there were no leading white candidates that finished any higher than sixth place with 5.6% of the vote. Clearly other factors were determining voter turnout than either the race of the candidates or RCV vs non-RCV elections. Despite these inconsistent findings, McDaniel boldly marches forth to render conclusions about the impact of RCV on different groups of racial voters, even though his conclusions are not remotely supported by his data. This looks like the worst kind of “data cherry picking” to cover up a puzzling conclusion based on a poor data set involving only two RCV elections, neither of which were remotely competitive. McDaniel’s cherry picking didn’t stop there. In calculating voter turnout for the three non-RCV mayoral elections in 1995, 1999 and 2003, he failed to mention that in each of these years there was a two-round runoff election, with a first round election in November in which no candidate garnered a winning majority of the vote, followed by the decisive runoff in December. So there were two non-RCV elections in each election year. But McDaniel only decided to include one of the two elections in his data set, apparently the December runoff in each year (which had higher turnout in two out of the three mayor’s races, and lower turnout in the third). So he ignored the November 1995 election, the November 1999 election when turnout was only 45 percent, and the November 2003 election when turnout was only 45.7 percent. This is flawed methodology based on blatant cherry picking, since McDaniel simply omitted three elections worth of data that did not fit within his frame. His study should never have made it through a peer review process, and it is an embarrassment to political science that not only was it approved for publication, but it has been uncritically cited by dozens of other political scientists. Share A “study” without wider context or credible data Lacking a data set that included even a single competitive RCV mayoral race, McDaniel declared that RCV lowered voter turnout in 2011, when turnout was 42.5 percent. But he also ignored -- or did not realize -- that voter turnout in mayoral elections during 2011 had sharply declined in all big cities, including far more steeply in nearby Los Angeles and other cities. In fact, San Francisco’s election in 2011 had the second highest turnout of any mayoral election in the nation’s 22 largest cities from 2008-2011. Was 2011 just a particularly low turnout year all across the country, perhaps because the country was still reeling from the aftermath of the housing market collapse in 2008-2010? McDaniel ignored this factor and did not search for alternative explanations beyond his flawed thesis. Furthermore, while McDaniel suggested that RCV leads to more “overvotes” – which is an invalidated ballot in which a voter, in either a non-RCV or RCV race, makes a mistake and selects two candidates for a single choice – he failed to address that in the June 2012 US Senate primary contest, which used the typical “one-choice” plurality method and did not use RCV, there was more than five times as many overvotes in San Francisco and Oakland than in the RCV mayoral elections in those cities. Additionally, turnout had been significantly higher and more representative in RCV elections for the San Francisco Board of Supervisors races -- that McDaniel didn’t even bother to study -- as compared to previous “delayed two-round runoffs” for those offices, often higher by as much as 40% in the RCV races. Perhaps the most surprising irony was that an earlier study co-authored by McDaniel (Overvoting and the Equality of Voice under Instant-Runoff Voting in San Francisco by Francis Neely and Jason McDaniel, 2015, California Journal of Politics and Policy) found that overvotes are often more common in lower-income precincts, but that the pattern of overvoting is similar in both RCV and non-RCV contests. Wrote Neely and McDaniel: “[Overvote] errors appear to be a function of complexity in general and not IRV per se…. the pattern of overvoting is similar in both IRV and non-IRV contests…Even among votes cast in a top-of-the-ticket race like U.S. Senate, overvoting occurs in an uneven fashion” (IRV, or ‘instant runoff voting,’ is another name for ranked choice voting in single-winner contests). So McDaniel not only contradicted his own conclusion in his earlier study with Neely, but the earlier study had been an important corrective for one of the most frequently made mistakes made by anti-RCV political scientists – a continual failure to provide crucial context by pairing a comparative analysis of real world RCV elections with an analysis of real world plurality or other electoral methods. Unfortunately McDaniel’s earlier study does not get cited much by other researchers, and McDaniel did not even cite it in his own flawed study analyzed above. Incredibly, McDaniel cherrypicked McDaniel, even as his flawed study has been cited dozens of times. Despite being a textbook example of poor political “science,” featuring both inadequate as well as cherrypicked data, the shelf life of McDaniel’s study has been extended endlessly by other political scientists and media outlets who have cited it uncritically. Equally troubling, the Journal of Urban Affairs put this paper through its peer review process and published it despite its numerous flaws. McDaniel gets it wrong, Part II Not content with producing one shoddy, confused paper, McDaniel produced another one a few years later, here is the link: Electoral Rules and Voter Turnout in Mayoral Elections: An Analysis of Ranked-Choice Voting by Jason McDaniel. San Francisco State Univ. (McDaniel, 2019). In this paper, McDaniel extended his previous flawed research focused on San Francisco, about voter turnout and voter impact, to multiple RCV cities through the 2018 elections. In his data set he included San Francisco, Minneapolis, St Paul, Oakland, Berkeley, San Leandro and Santa Fe. He then compared their turnout in mayoral elections to non-RCV cities, and to mayoral elections in those cities held before first RCV usage, and concluded “a significant decrease in voter turnout of approximately 3–5 percentage points in RCV cities after the implementation of RCV.” But he replicated many of the same mistakes as his first study presented above. While in this study McDaniel attempted to distinguish between various factors, such as odd year vs. even year elections, competitive races vs. noncompetitive, contests with open seats and other factors, the analysis is superficial and inadequate. He attempts to incorporate so many often-conflicting variables that his conclusions are once again unsupported by the actual data, and ultimately unconvincing (this second study never underwent a peer review process). For example, McDaniel declared that for RCV cities “in elections that are more competitive than average (margin of victory less than 20%), there is no significant RCV effect on voter turnout.” Yet McDaniel is a professor in a city, San Francisco, in which the 2018 special election using RCV to fill a mayoral vacancy was exceedingly close, decided by a margin of only one percentage point, and resulted in the second highest turnout in San Francisco history for a mayoral election. Illustrating the complexity involved in assessing the critical factors in turnout, that special election was held on the same election day as federal and state offices, which tends to boost turnout. Yet more voters participated in that RCV mayoral election than voted on the same day in the non-RCV primary for governor in which former San Francisco mayor Gavin Newsom was running. Even more puzzling, in this study McDaniel inaccurately cited his own previous study from 2015 with Neely. McDaniel wrote, “Neely and McDaniel (2015) examine individual ballot image files within a natural experiment, and find higher rates of ballot errors in RCV elections compared to non-RCV elections” (emphasis added). However, we quoted from that 2015 study several paragraphs above, and in actual fact Neely and McDaniel actually concluded the opposite -- that the pattern of overvoting – which is the most common form of ballot error – is similar in both RCV and non-RCV contests. McDaniel also ignored the fact that in Bay Area RCV elections held in even years – at the same time as federal and state elections, when turnout is highest -- the “undervote” (that is, the dropoff in ballots cast for governor or mayor) has declined, which contradicts his thesis that the act of ranking ballots in RCV elections is too complex and presents a barrier for certain demographics of voters. To his credit, McDaniel actually acknowledged another contradiction in his own paper, which found a negative RCV turnout effect in some odd-year elections but not others, admitting that “may present a challenge to the theory that increased complexity [from RCV] will have a marginal negative effect on voter turnout.” But he tried to wallpaper over that contradiction by blaming it on an unlikely source -- bad election administration. McDaniels wrote, “This would suggest that the negative impact of RCV on voter participation may be alleviated by high quality election administration,” without presenting any data or even anecdotes to support such an unfounded theory. While competent election administration of any election, whether RCV or non-RCV, is crucially important, there is no credible research that supports the far-fetched notion that the quality of election administration has much of an impact on voter turnout in US elections, whether using RCV or otherwise. Upgrade to a $5 subscription The unvirtuous circle of academic research It is puzzling how McDaniel’s first study could have survived the peer review process for the Journal of Urban Affairs. The mistakes in McDaniel’s first study above should have been obvious to anyone with a basic understanding of ranked choice voting as well as elections in general, and elections in San Francisco specifically. It undermines faith in the credibility of the peer review process to think that a jury of peer political scientists did not catch the egregious errors and reject McDaniel’s sloppy research and paper. And it remains a black mark on political science that this thoroughly discredited study has been cited dozens of times by other researchers. Indeed, in our research paper it became apparent that many political scientists cite each other’s flawed research to pad their list of citations and to legitimize their own flawed research, creating an unvirtuous circle of political science. More broadly, McDaniel’s voter turnout studies, like other studies evaluating RCV’s impact on turnout, lacked a recognition that no credible opinion or research can claim that RCV increases voter turnout merely because so many voters are excited to vote for their favorite candidates instead of “lesser evil” candidates without worrying about spoilers. Instead, with respect to turnout, the advantage of RCV has always been that, in most places where it has been used, it has eliminated a pre-November primary or post-November runoff, which usually saw about half the turnout of the November general election. This is especially true during even years when there are state and federal elections on the ballot which substantially drive turnout more than local contests. Any study that does not adequately account for this non-November primary/runoff vs November general election dynamic, or odd year vs even year election factors, is simply not credible. Both of McDaniel’s studies largely failed on those grounds. Steven Hill and Paul Haughey Share Upgrade to a $5 subscription Thanks for reading DemocracySOS…your digital portal for the pro-democracy movement. Subscribe for only $5 per month to receive full benefits and to support our work. Subscribe
Trump continues overhaul of White House grounds with new Rose Garden statues
A bronze Thomas Jefferson was installed as the fifth new statue last week. Three were provided by Harlan Crow, a conservative collector and political donor.
Live Nation Entertainment, Inc. $LYV Shares Acquired by Fifth Third Bancorp
Fifth Third Bancorp lifted its position in shares of Live Nation Entertainment, Inc. (NYSE:LYV - Free Report) by 336.3% in the first quarter, according to its most recent 13F filing with the SEC. The firm owned 28,209 shares of the company's stock after purchasing an additional 21,744 shares during
Fifth Third reports rise in quarterly profit on higher interest income
Fifth Third Bancorp reported a rise in second-quarter profit on Friday, helped by higher net interest income and fee growth in capital markets and wealth management businesses.
Bellingham celebrates Pride with parade, entertainment
Crowds gathered for the fifth pride resurgence event in Bellingham A parade and festival on Sunday capped a weekend of celebrating Pride in Bellingham. The parade hit the ground running at 11 a.m.…
Fifth Measles Case of 2026 Confirmed by Wyoming Department of Health
The Wyoming Department of Health (WDH) has confirmed a fifth case of measles in Wyoming in 2026, and the fourth in Teton County. The case is an adult with no identified links to the previous three Teton County cases. Measles is a highly contagious virus that can cause severe illness. The public may have […]
Trump recommends Lindsey Graham’s sister to serve rest of his Senate term
The president recommended that South Carolina Gov. Henry McMaster select Darline Graham to serve into January. Her brother died suddenly amid a campaign for a fifth term.
Today’s Papers: Sinner triumphs at Wimbledon, the pride of Italy
La Gazzetta dello SportMythical Sinner: He’s still the King. Historic double at WimbledonJannik triumphs in four sets against a great Zverev. It’s his fifth grand slam. Cahill and Vagnozzi: ‘A ...
Arts Fest 2026 Sunday event, entertainment lineup
Sunday marks the fifth and final day of the Central Pennsylvania Festival of the Arts 2026.
‘I'm not gonna be the fifth option': Zack Wheeler declines late All-Star invite
With a first-half résumé as one of baseball’s most effective pitchers, Zack Wheeler feels disrespected by a late All-Star Game invite.
NASA is creating a fifth state of matter on the ISS, thanks to an upgrade to a mini-fridge-sized quantum lab
A new set of upgrades to the International Space Station’s Cold Atom Laboratory is allowing NASA to probe quantum mechanics at the coldest possible temperatures while in zero gravity.
MAGA's attack on science is even worse than it looks
In my post on America’s 250-year anniversary, I argued that respect for the individual was the “secret sauce” in the U.S.’ long-lasting preeminence among nations. But it was certainly not the only factor. There were plenty of institutional innovations that helped the U.S. stay on top — economically, militarily, and in terms of the attractiveness of its society. One of these was American science. Today we take things like the modern research university, government grants for science, public-to-private research spinoffs, etc. for granted, but a lot of that infrastructure wasn’t there before World War 2. It was either invented or scaled up massively by the U.S. government in the postwar period, led by far-sighted scientist-bureaucrats like Vannevar Bush (pictured above). If you want to read about this history, a good place to start would be Jonathan Gruber and Simon Johnson’s excellent book Jump-Starting America. Those scientific institutions didn’t exist in a vacuum, however. They were backed by the U.S. government’s abiding faith in the power of science — and, even more fundamentally, by deep popular trust in the scientific enterprise. Science gave us radar and the atom bomb in wartime, and in peacetime it gave us plastics, vaccines, cheap food, and a thousand other things that made our lives easier. Science was also the driver behind American industry — chemicals, aerospace, telecommunications, computers, electronics, and so on. We owed science our jobs, our livelihoods, our comfortable living standards, and our greatness and power as a nation. It’s little wonder that both political parties, even as they fought viciously over other issues, were steadfast in their support of science. For a long time, the only people who distrusted science were a hippie fringe on the left who disliked modernity (or thought they did, anyway), who also disliked American industry and American power, and who subscribed to an early version of degrowth environmentalism. America’s scientific enterprise is still strong, especially compared to the systems in Europe, Japan, Korea, and other developed countries. It has lost a lot of ground to China in a relative sense, but a lot of that is because of China’s incredible growth; as China has poured untold amounts of money and talent into its research labs, spending and output have overtaken the U.S. by some measures. There are a few ways in which China’s rise creates problems for American science — for example, top scientists can choose to work in China instead of in the U.S. — and of course there’s the concern that China’s technological strength will help its military to reign supreme. But overall, China’s rise in science should be good for American science, since American scientists can use Chinese discoveries for free and build on them. The much bigger problem is that the scientific enterprise America built during and after World War 2 is now being threatened with absolute decline. The biggest problem, of course, is that much of the country — the Republican half — has basically lost faith in the scientific enterprise. To what degree this loss of faith is justified is an open question, and deserves to be discussed openly. But the larger point — that the system that powered American dominance is under threat — is true either way. Most Americans still trust science, but MAGA Republicans don’t There’s a myth, popular in right-wing circles, that scientists have lost the trust of regular Americans — either due to the increasingly left-wing composition of academic departments, or to misbehavior during Covid, or to DEI-related research taking over science, etc. This also fits with a wider narrative that Americans are losing trust in all of our institutions. But it just isn’t true. Poll after poll shows that on the whole, Americans still trust scientists and want to spend more on science. For example, here’s a Pew poll from late 2025 showing that although about a fifth of Republicans did lose confidence in science in 2020, two thirds still have at least “a fair amount” of confidence: That same poll found that scientists are among America’s most trusted groups — even better trusted than the military! In fact, Americans trust scientists more than people in most other countries do. Other polls show that although Republican trust in science has dropped somewhat, Republican support for spending more on science remains very strong: A Pew poll in 2023 found the exact same thing: So when MAGA types tell you about scientists losing their credibility, or a drop in trust in science, they’re only talking about themselves. Whatever left-wing politicization of science happened during the Biden administration — and there was definitely some of that — it was not enough to make most Republicans lose faith in the scientific enterprise, or favor research cuts in order to purge unwanted ideology from the system. That doesn’t mean I think progressives should continue down the path of politicizing scientific research. They should not, and Biden made real missteps in this area. Objectivity clearly matters for public trust of science in the long term. But as of right now, there’s no crisis of trust in science, except among the smallish minority of people who are running around screaming that there’s a crisis of trust in science. But despite science’s overwhelming popularity and public trust, Trump and his administration are launching an unprecedented and devastating attack on American science — cutting funding, and forcing science projects to undergo ideological review by government commissars. Trump’s comprehensive attack on science
Gov. Whitmer announces Michigan ranked #6 in best states for doing business
LANSING – On Thursday, Governor Gretchen Whitmer celebrated Michigan’s No. 6 ranking from CNBC’s America’s Top States for Business, earning a Top 10 ranking for a fifth time under Governor Whitmer’s leadership and representing a massive leap from No. 24 at the start of her administration in 2019. “Michigan is a place where everyone can […]
Layoffs Hit GameSpot Again
It's the fifth round of layoffs since the company was purchased by Fandom
Billionaire MacKenzie Scott just donated $20 million to support America’s youth mental health, as a fifth of teens struggle with suicidal thoughts
MacKenzie Scott, worth $35.8 billion, just donated a record-breaking gift to the U.S. nonprofit Active Minds to support a “new era of mental health.”
Bennett, Cheng lead the Red Sox past the White Sox, 5-0
Jake Bennett allowed four hits in seven innings, Tsung-Che Cheng had his first multi-RBI game and the Boston Red Sox beat the Chicago White Sox 5-0 on Wednesday night for their fifth straight victory.
What must Fery do to become Wimbledon semi-finalist?
Arthur Fery is bidding to become the fifth British man to reach the Wimbledon semi-finals in the Open era - here is how he can beat Italian 10th seed Flavio Cobolli.
"Pitch Black" Set Guide: Full Set List, Product Lineup, Store...
We now have the full English set list for Pitch Black starring Mega Darkrai ex! As posted before, it will release on July 17th as our fifth English Mega
5th Annual 'Party in the Park' Set for July 11 in New York Mills
The Village of New York Mills is inviting the community to the fifth annual Party in the Park, a celebration focused on family, friendship and local pride.
Glasner becomes Forest's fifth head coach in a year
Former Crystal Palace manager Oliver Glasner replaces Vitor Pereira following his sacking last week.
EasyJet Agrees in Principle to Castlelake’s Latest Takeover Offer
The latest proposal—the fifth from Castlelake—stands at £6.90 a share. This is up from a previous proposal of £6.50 a share.
Art Should Be Part Of Your Health Routine—8 Ways To Add More To Your Life
The fifth pillar of health? ART!
Mets play the Braves looking to end road slide
New York Mets (36-53, fifth in the NL East) vs. Atlanta Braves (52-35, first in the NL East) Atlanta; Sunday, 12:30 p.m. EDT PITCHING PROBABLES: Mets: Nolan McLean (5-5, 3.78 ERA, 1.12 WHIP, 113 strikeouts); Braves: Martin Perez (6-5, 3.27 ERA, 1.16 WHIP, 61 strikeouts) LINE: Braves -198, Mets +161; over/under is 8 runs BOTTOM LINE: The New York Mets will attempt to end their three-game road slide in a matchup with the Atlanta Braves. Atlanta has a 27-16 record in home games and a 52-35 record overall.
George Russell Cannot Explain His Silverstone Sprint Pace
George Russell finished fifth in British Grand Prix Sprint Qualifying at Silverstone, just under four tenths of a second behind pole-sitter Lewis Hamilton and behind…
France Politics
France's President Emmanuel Macron chairs the fifth follow-up meeting on combating drug trafficking, at the Elysee presidential Palace in Paris, Thursday July 2, 2026. (Simon Wohlfahrt/Pool Photo via AP)
Survey shows Japan's business sentiment improving for a 5th straight quarter
TOKYO (AP) — Business sentiment among major Japanese manufacturers has improved for a fifth straight quarter, the Bank of Japan said in its quarterly “tankan” survey released Wednesday.
Survey Shows Japan's Business Sentiment Improving for a 5th Straight Quarter
TOKYO (AP) — Business sentiment among major Japanese manufacturers has improved for a fifth straight quarter, the Bank of Japan said in its quarterly “tankan” survey released Wednesday. The survey's so-called diffusion index rose to 22 from 17 in the previous quarter, the BOJ said. The index for ...
2026 Best of the 'Burgh Winners: Entertainment and Leisure
Activity Bar Pins Mechanical Co. Bed & Breakfast The Mansions On Fifth Luxury Hotel Boutique Hotel Kimpton Hotel Monaco Pittsburgh Camp for Kids
From invention to impact: Hong Kong Science Fair gives young innovators a wider stage
Organised by the Hong Kong Innovation Foundation, with Sino Group as Principal Patron and the Innovation, Technology and Industry Bureau as Supporting Bureau, the Fifth Hong Kong Science Fair has drawn to a close. Students are already looking beyond their prototypes, with international exchanges and future applications now firmly in sight.
Eagles Fifth Round Pick Being Viewed as Next Brock Purdy
If there's one guy I trust around the NFL, it's Howie Roseman. Roseman, who has continued to prove that he can find talent at a very high level at any given moment, is hopeful that he did so in the NFL Draft once again with his fifth-round pick of Cole Payton.
Seahawks Get Big Rashid Shaheed Update Ahead of Training Camp
The Seattle Seahawks have Jaxon Smith-Njigba as their WR1, but the question will be whether Rashid Shaheed can become a WR2. Last season, the Seahawks traded a fourth-round pick and a fifth-round pick in the 2026 NFL Draft to the New Orleans Saints for Shaheed. Moreover, Shaheed didn’t become a rental for the Seahawks, as […] The post Seahawks Get Big Rashid Shaheed Update Ahead of Training Camp appeared first on HEAVY.
Houston Rockets Star Alperen Sengun Catches Stray From NBA Rookie
One of the NBA’s best young stars today is Houston Rockets center Alperen Sengun.The 23-year-old big man is already a two-time All-Star, averaging 20.4 points, 8.9 rebounds, 6.2 assists, 1.2 steals and 1.1 blocks last season. He helped the Rockets make the playoffs as the fifth seed.However, the Rockets suffered a disappointing exit at the […] The post Houston Rockets Star Alperen Sengun Catches Stray From NBA Rookie appeared first on HEAVY.
Hunter Goodman smashes three home runs vs. Twins
Colorado Rockies designated hitter Hunter Goodman hit three long home runs against the Minnesota Twins on Saturday. Goodman crushed two no-doubters — solo shots in the first and third innings — in his first two at-bats against Twins starter Mike Paredes. Then, after grounding out in the fifth, Goodman came up with two runners on base and the Rockies leading 3-2 in the seventh.
Flyers hope to hit on another fifth-rounder from Minnesota high school level
The Flyers have had some success with fifth-rounders from the Minnesota high school level. They’ll hope Kent Sauer adds to it.
Walbert Ureña implodes as Angels drop series opener against Athletics
On a night that started with an abrupt front office decision, Los Angeles Angels’ starter Walbert Ureña saw an abrupt end to an outing after a disastrous fifth inning led to a 9-3 loss against the Athletics on Friday.
KATSEYE addresses speculation over Manon's future with group
KATSEYE is asking fans for patience as Manon Bannerman's health-related hiatus stretches into its fifth month.
Honoring the best in small business
Fifth Street Renaissance, Resource One, Cured Catering, and ChangeBridge Consulting are all honored.
REV Entertainment Expands College Baseball Series to Spartanburg, South Carolina, in 2027
REV Entertainment today announced the addition of Spartanburg, South Carolina, to its growing College Baseball Series schedule, with Fifth Third Park set to host the inaugural Spartanburg College Baseball Series, Feb. 26-28, 2027. The four-team...
‘Blatant discrimination’: WNBA’s decision to punish Caitlin Clark sparks outrage
The Indiana Fever’s Monday night win over the Phoenix Mercury got chippy in the fourth quarter, with Fever star Caitlin Clark and Mercury veteran DeWana Bonner getting into an altercation that led to technicals being assessed to multiple players on both teams. Clark was one of the players hit with a tech, her fifth of…
CBS Sports ranks Falcons' 2026 offseason among worst in NFL
CBS Sports analyst ranks Falcons 2026 offseason fifth-worst in the NFL
Phillies turn to opener, make ‘commitment' to fifth rotation spot
The Phillies will use Tim Mayza as an opener Monday, then turn to Alan Rangel as they begin to settle on a new plan for their fifth rotation spot.
Keir Starmer has quit as prime minister – what will happen next in UK politics?
Britain will soon have its fifth prime minister in four years. The Guardian explains how we got here and what challenges await Starmer’s successor
Brant Returns To Action In Maxfield
Zedan Racing Stables’ Grade 1 winner Brant will test seven fellow 3-year-olds entered in next Sunday’s fifth running of the $250,000 Maxfield Stakes (G3 at Churchill Downs. Run at seven furlongs, the Maxfield Stakes goes as Race 9 with a post time of 4:56 p.m. (ET) First post is 12:45 ...
\'Toy Story 5\' rakes in the biggest box-office debut of the year with a franchise-best $160 million
“Toy Story” still has a friend in moviegoers. The fifth installment in the Pixar series debuted with $160 million in domestic ticket sales, according to studio estimates Sunday. That easily
Twins 16, Diamondbacks 8: The Beautiful Game
In the dumbest Twins game any of us will see all year, the Twins jumped out to your classic 16-0, fifth-inning lead, then handed the ball over to the bullpen to drag us kicking and screaming towards a finish line placed just ahead of 12:30 am CT. You’ve maybe never seen a former All-Star become […]
Nationals' Clayton Beeter: Escapes with fifth save
Nationals' Clayton Beeter: Escapes with fifth save
Yankees bludgeoned as Warren melts down following fifth inning error
Warren’s implosion was punished by Sal Stewart and Spencer Steer,
Deion Sanders Was Actually Disappointed By Shedeur's Rookie Season
By all accounts, Shedeur Sanders outperformed expectations during his rookie season with the Cleveland Browns. Sanders, a fifth round NFL Draft pick, ended up taking over as Cleveland's starting quarterback midway through the season. He threw for 1,400 yards and seven touchdowns and ended up making ...
A’ja Wilson leading early charge for All-Star votes
A’ja Wilson is eyeing an unprecedented fifth MVP award this season, and fans are noticing as the All-Star Game begins to pull into view.
The world's first nuclear clock just ticked on — and it could help detect a fifth fundamental force of physics
By using a rare thorium nucleus as a timekeeper, physicists have demonstrated the first working nuclear clock, a device that could lead to even more precise clocks and new ways to search for dark matter.
United States Announces U.S. Government Members of the U.S.-Uzbekistan Business and Investment Council
United States Announces U.S. Government Members of the U.S.-Uzbekistan Business and Investment Council Press Release June 16, 2026 Today, at the fifth annual Tashkent International Investment Forum (TIIF 2026), the United States announced the following inaugural members of the U.S.-Uzbekistan Business and Investment Council: U.S. International Development Finance Corporation (DFC) Vice President Bethany Aquilina Brez Export-Import Bank of the United States (EXIM) Senior Vice President Sarah Witten Assistant Secretary of Commerce, David Fogel Assistant Secretary of State for Economic, Energy, and Business Affairs, Caleb Orr U.S. Ambassador to Uzbekistan, Jonathan Henick Launched in Washington, D.C., in April 2026, the U.S.-Uzbekistan Business and Investment Council serves as the premier bilateral platform to accelerate trade and catalyze private sector investment between the United States and Uzbekistan. The Council is Co-Chaired by Special Envoy for South and Central Asia, Ambassador Sergio Gor and Saida Mirziyoyeva, Head of the Administration of the President of the Republic of Uzbekistan. The Council gives American businesses direct access to U.S. government financing, trade promotion, and market development tools to execute large-scale projects in Uzbekistan. Uzbekistan holds significant reserves of critical minerals essential to U.S. technology, defense, and energy sectors. The Council provides a direct mechanism to advance U.S. access to these resources through transparent, mutually beneficial partnerships. Through their participation, the American members of the Council will deepen the institutional framework for American commercial engagement in Uzbekistan.
'Disclosure Day' lands out-of-this-world opening weekend with $93 million at global box office
Steven Spielberg's alien oddity 'Disclosure Day' conquered the world this weekend with a $93 million gross, while the ultra low-budget horror 'Obsession' continues to surge in its fifth weekend in theaters.
Is SMIC N+3’s Metal Pitch Smaller than Intel 18A’s?
Almost four years ago, we published that SMIC had started shipping 7 nm (N+1) chips. Now, SMIC is shipping its third-generation 7 nm (N+3) process in Huawei’s Kirin 9030, with a minimum metal pitch of 32.5 nm, about 10% tighter than the 36 nm minimum metal pitch shipping in Intel’s latest Panther Lake CPUs on 18A. The headline is true, but incomplete cherry picked metric. N+3 reaches the density of TSMC N6 through aggressive DUV multi-patterning and design-technology co-optimization (DTCO), but it pays for that in complexity, efficiency and process control. We found this and more in our reverse engineering and teardown where we cover SMIC’s N3 process technology, Huawei’s packaging, memory, architecture, and more. SemiAnalysis has been building a state-of-the-art teardown lab in Oregon capable of analyzing the world’s most advanced and important chips over the last year and half. We have already generated revenue on advanced datacenter chip teardowns including our recent reverse engineering of a major TSMC customer’s COUPE CPO optical engine + EIC 3D stack. This is the first public report from the SemiAnalysis Teardown Engineering & Evaluation Lab, or STEEL for short. The lab is aggressively scaling up and out and we’re excited to announce it publicly. This is a bit of inconvenient timing for TechInsights as they are private equity owned and currently being sold while having enjoyed virtually no credible competition for decades. This has led to TechInsights underinvesting in CAPEX. SemiAnalysis exceeds TechInsights in revenue despite no venture or private equity ownership and being founded only 6 years ago. Because we have no external investors and are founder led, we move faster, build faster, and we can release client chip teardowns for free regularly, while focusing on datacenter for our major clients. Here’s the first public image from our lab, the HiSilicon Kirin 9030 Pro SoC: This report will detail our teardown of the Kirin 9030 and our findings on SMIC’s N+3 process, the most advanced in China. For comparison, we’ll show our teardown of the MediaTek Helio G99, made on TSMC N6. Through this comparison, we can look at the effect of export controls – SMIC N+3 and TSMC N6 are comparable nodes, but one is heavily export-controlled, the other free to use the West’s most advanced equipment. Here we see both China’s progress and constraints. SMIC N+3 reaches TSMC N6-class logic density, but it requires far more aggressive DUV multi-patterning, so it does not match N6 on process maturity or cost. The Kirin 9030 Pro performs similarly to three-year-old Android flagships, and trails far behind the current flagship SoCs from Apple, Qualcomm, MediaTek, and Samsung. The efficiency gap is even wider. Export controls have not stopped Huawei and SMIC from shipping advanced silicon, but they have forced a different path. Without EUV, SMIC is leaning harder on DUV multi-patterning, DTCO, and increasingly complex integration. The roadmap continues forward through tighter design rules and backside power, but each step adds cost and process risk. Huawei’s τ scaling and LogicFolding show another path: stacking active logic and recovering density through advanced packaging and system-technology co-optimization (STCO). To understand the Kirin 9030, we must first understand Huawei’s SoC history. HiSilicon is Huawei’s chip design arm, responsible for the Kirin smartphone SoCs, Kunpeng server CPUs, Ascend AI accelerators, and switch/router networking silicon. Before export controls, Huawei was TSMC’s largest customer – the only customer on TSMC’s first EUV node, N7+, and among the first on N5, alongside Apple. That ended in late 2020. Huawei switched to Qualcomm SoCs in its flagship smartphones, though export controls limited them to 4G-only variants. In late 2023, Huawei returned to in-house silicon with the Kirin 9000s, a successor to the Kirin 9000, fabricated on SMIC N+2 instead of TSMC N5. In the following years, they released the Kirin 9010 and 9020 on the same N+2 process. These chips used Huawei’s in-house TaiShan CPU cores and Maleoon GPU. We have not torn down a Kirin 9020 ourselves, so the predecessor die shot is from Kurnal. The die shots show how Huawei spent its silicon budget: which functional blocks are where, and how their areas compare to the predecessor. First, a quick guide to the major blocks on the die. The total die area is nearly identical, but the 9030 uses that area more aggressively. A denser process lets Huawei fit an extra middle CPU core, more GPU and NPU cores, and larger caches into the same footprint. In contrast, the Helio G99 is a much smaller, low-cost SoC, built for budget smartphones rather than a flagship device. While the Kirin 9030 is ~140 mm², the G99 is only ~29 mm², roughly one-fifth the area. The underlying TSMC process technology, however, is directly comparable as a baseline for analyzing SMIC’s. The Kirin 9030 is an evolutionary refresh, not a clean-sheet design. Its CPU, GPU and NPU cores carry over the 9020’s families, and the gains come from three levers: the SMIC N+2-to-N+3 process step, DTCO and floorplan work, and incremental microarchitecture. Area is where the first two show up, and the 9030 scales well here. Performance and efficiency are the harder test. Huawei’s design holds up better than its node would suggest, but the chip still trails, both because N+3 sits behind the leading-edge nodes and because its cores, while competent, remain a few generations behind the newest designs. The new prime core is an incremental update. The main changes are a 10% frequency increase from 2.5 GHz to 2.75 GHz and a doubling in the L2 cache from 1 MiB to 2 MiB. Despite the increased cache, the core size decreased by 7.6%. Excluding the private L2 cache, the core size decreased by 21%. This is a large reduction for an incremental node. Compared with the TaiShan New V120 core in the Kirin 9020, the Kirin 9030’s middle core is almost unchanged architecturally, yet each core shrinks by ~22%. Most of that comes from the move from N+2 to N+3, with layout likely accounting for the rest. Visually, the most noticeable change is the increase from 3 middle cores to 4. There is also a 20% increase in the shared L3 cache of the big cluster. This helps to improve multi-core performance without sacrificing much in terms of area. Even with each core shrinking, the big CPU cluster’s total area is essentially unchanged. The per-core savings went back into an additional middle core and larger caches. The tiny cores shrank less than the prime core (excluding its L2 cache) and less than the middle cores. This is likely because fixed overhead is a larger share on a small core. We cannot resolve any architectural changes from the die shot alone, but the per-clock and efficiency gains shown below point to more than pure process and layout scaling. The area reduction was offset by a doubling of the shared L2 cache from 2 MiB to 4 MiB, leaving the total tiny CPU cluster area slightly larger. Area is the easiest improvement to see from a die shot, but it is only one part of PPA (power, performance, area). For modern logic, power and performance matter just as much, and often more. Since Dennard scaling broke down in the mid-2000s, voltage and frequency have not scaled in step with transistor dimensions, so each node has had to fight harder for gains in performance and efficiency. The starkest comparison is not Kirin 9020 versus Kirin 9030 Pro. Apple’s efficiency cores run circles around Huawei’s prime core. Apple’s low-power core delivers 20% higher integer performance while drawing only 1 W, compared with 4.5 W for Huawei’s prime core. N+3 matches TSMC N6, but N6 is several generations old. Apple and Qualcomm build on N4 and N3P, which are denser and sit on a better voltage-frequency curve, giving them a larger transistor budget and more performance per watt. The 9030’s own cores did improve. The middle and tiny cores gained 17% and 14% in per-clock integer performance over the 9020, with floating-point flat on the middle core and up 11% on the tiny. The tiny core improves cleanly, with performance rising while power falls and efficiency increases by 45% in integer and 24% in floating point. The middle core is mixed: integer performance rises but power rises faster, cutting integer efficiency by 7%, while lower power lifts floating-point efficiency 16%. Per-clock gains at the same or lower frequency are microarchitectural, so the cores are tuned, not just shrunk. Both also failed to hold their rated maximum frequencies, pointing to thermal, power, or stability limits. Per clock, the middle core sits around Arm Cortex-A720 and the tiny core near the Cortex-A520; absolute performance trails because Huawei clocks them much lower. The prime core is roughly Cortex-X2 class per clock, a 2021 design. Apple’s 2020 M1 Firestorm core is still 35% higher per clock and 57% faster in absolute integer performance at a similar 4.5 W. The current leading edge is further ahead again: the Apple M5 P-core is 60% higher per clock and 2.7× faster, the Arm C1 Ultra 45% higher and 2× faster. Matching older high-end cores per clock is a genuine design achievement. What Huawei cannot match is the voltage-frequency curve and transistor budget of leading-edge nodes, which let Apple, Qualcomm and others spend more transistors in the same area on wider cores, larger caches and deeper buffers while running at lower voltage. Huawei’s LogicFolding roadmap is one answer, stacking active logic to recover density and shorten signal paths. We return to it later. The GPU compute units (CUs) changed more visibly than the CPU cores, moving to a more rectangular layout for both the arithmetic logic unit (ALU) clusters and the CU overall. Even with ray-tracing support added, a CU shrank ~28%. However, that shrink is offset by the increase from 4 to 6 CUs and the area outside the CUs grew 33%. Overall, the GPU cluster is larger by ~10%. The GPU is where Huawei makes its biggest gains. The Maleoon 935 is not competitive with current flagships, but it is a large step up from the 920 and reaches older-flagship territory. In 3DMark it is 70% faster in Wild Life Extreme (WLE) and 79% faster in Steel Nomad Light (SNL) than the 920; with 11% higher clocks and 50% more CUs, the ~67% theoretical uplift roughly matches WLE and is beaten by SNL. It edges ahead of the Snapdragon 8+ Gen 1 in WLE and SNL, and the Dimensity 9200 and Apple A16 in WLE, but stays far behind newer parts: the Snapdragon 8 Elite Gen 5 and Dimensity 9500 are ~2.4–2.6× faster in WLE and ~3.2× faster in SNL. The Maleoon 935 is Huawei’s first GPU with hardware-accelerated ray tracing; there it lands slightly ahead of the Exynos 2200, and on par with the Apple A16, with current flagships up to 3.7× faster. The Neural Processing Unit (NPU) saw the largest structural changes of any block, moving from a Lite and a Tiny core in the Kirin 9020 to a Lite and two Tiny cores in the Kirin 9030. Both core types also show significant layout changes. This is a reversal in Huawei’s NPU design. The Kirin 9000 5G, its last flagship chip on TSMC N5, used two Lite and one Tiny core. The series of SoCs on SMIC N+2 moved to one Lite and one Tiny core, likely for area savings. With the Kirin 9030, Huawei has shifted back toward a larger multi-core NPU cluster, but with the additional area going to a Tiny core rather than a Lite core. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Before diving into the process stack, the package and memory are worth separating from the SoC itself. The Pro variant of the Kirin 9030 carries 12 GB of Samsung DRAM, with two stacks of four dies each. The dies were identified as the K4L2E165YD, a 12 Gb LPDDR5X-9600 device fabricated on Samsung’s 1a node, the fourth generation of its 10 nm-class DRAM after 1x, 1y and 1z. 1a has shipped in volume since 2022, so this is current memory rather than older-node inventory. The 16 GB Pro Max variants we obtained were found with both CXMT and Samsung packages. The CXMT package is marked CXDD7JEDM, with two stacks of four dies, packaged in week 45 of 2025. The inferred die dimensions from X-ray computed tomography (CT) are consistent with a known density of ~0.3 Gib/mm² for the CXMT G4 process, roughly equivalent to other manufacturers’ 1z processes. The Kirin 9030 uses a typical integrated package-on-package (iPoP) stack: multiple DRAM dies in a memory package sit above an organic redistribution layer (RDL) interposer, which sits above the SoC and package substrate. The full package is then mounted to the printed circuit board (PCB) through ball-grid array (BGA) solder bumps. The memory package substrate is a thin bismaleimide-triazine (BT) laminate carrying the LPDDR5X stack. The organic RDL interposer over the SoC routes the PoP signals around the die and carries possible dummy thermal copper pillars. The package substrate, a thicker Ajinomoto Build-up Film (ABF) build-up over a BT core, fans the flip-chip bumps out to BGA pitch and embeds the power planes. The whole stack is organic. The only silicon is the SoC and the LPDDR5X dies; there is no silicon interposer. Keeping it all-organic brings the package’s coefficient of thermal expansion (CTE) close to the PCB’s, reducing board-level warpage, and avoids the cost of a silicon interposer the SoC’s bandwidth does not need. In an iPoP stack, the memory package connects to the organic RDL interposer through an array of solder bumps. Underfill fills the gap around those bumps, adding stiffness and protecting the joints from mechanical stress. The Pro and Pro Max variants differ here, which we cover behind the paywall. The die shot and architecture tell us how Huawei allocated its silicon budget. The process tells us what SMIC can manufacture. We use the Helio G99 as the process reference for TSMC N6. Both SMIC N+3 and TSMC N6 are evolutions of previous 7 nm-class nodes. We used targeted TEM cross-sections through logic and memory regions, imaged in both fin-cut and gate-cut directions. Each cross-section caption gives its horizontal field width (HFW), the real width of the imaged area. We start at the transistor fins, then move up through standard cells, local interconnect, and SRAM. SMIC has not overtaken Intel or TSMC. It uses aggressive DUV scaling and DTCO to reach N6-class density, but that density doesn’t translate into comparable performance and efficiency, for two reasons: the node gap to leading-edge nodes, and Huawei’s core designs. Fin Profile One of the most important knobs in a FinFET process is the fin profile: the shape of an individual fin and the channel where current passes from source to drain. The ideal fin is tall, narrow, and nearly vertical. A taller fin increases effective channel width, while a narrower fin improves electrostatic control by thinning the body the gate must control. Push either too far, and the process pays for it: weaker drive current, fragile fins, taper, footing and line-edge variation that hit yield and device variability. The Intel 22 nm, 14 nm, and 10 nm fin cross-sections show how FinFET nodes have improved over time. 22 nm fins were a first-generation structure, relatively short, wide and strongly tapered. The shape limits current density and reduces gate control uniformity across the height of the fin. At 14 nm and 10 nm, Intel pushed the fins taller and narrower while also making the sidewalls more vertical. Rather than shrinking the device, these changes increase the effective channel width per fin and improve electrostatic control. The trade-off is that taller fins at tighter pitches are much more difficult to manufacture. Now, let’s compare the Helio G99 on TSMC N6 with the Kirin 9030 on SMIC N+3. Both processes are in the same class, with fin pitch of 30-32 nm on N+3 and 34 nm in our N6 cross-section. The pitch for N6 is especially interesting as N7’s HD library is generally listed with a 33 nm fin pitch, and N6 did not shrink pitches directly. Its density gains came from DTCO instead of tighter pitches. The 34 nm pitch was stable across our sampled region and serves more as a comparison against the SMIC N+3 we have not investigated further. Pinning down N+3’s fin patterning scheme takes more than one core unit. The CPU cores show a dense ~32 nm pitch, with the pitch between N-P fin pairs alternating between 78 and 88 nm. Logic alone may be consistent with dual-pitch mandrels of 120 and 110 nm, but this is a complex and unusual approach. Combining the pitch from the the 8T SRAM, which has more complex repeat unit, with the CPU core sequence allows us to reverse engineer the patterning steps with more confidence. As both the logic and SRAM should share the same base grid, a single CD mandrel lithography pattern with 128 nm pitch undergoing SAQP produces a die-wide ~32 nm grid (128 nm/4), which supports the pitch sequencing seen in both logic and SRAM cells. In the sampled cross-sections, N+3 shows a taller, narrower, higher-aspect-ratio fin than N6. The measured fin aspect ratio is ~9.5:1 on N+3 versus 7.8:1 on N6. N+3 also shows less top rounding, with an estimated radius of ~2 nm, compared with 2.8 nm on N6. Even though the fin widths differ, the ratio of top rounding to fin width tells the same story, with N+3 at 0.37 and N6 at 0.44. In a geometric sense, lower is better; a perfectly rectangular fin would have no top-rounding penalty. These are single-digit-nanometer features measured from a handful of cuts, so treat the absolute numbers as approximate. The important result is the relative gap: N+3’s fins are consistently taller, narrower and less rounded than N6’s. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Standard Cell A standard cell is the basic building block of chip layout: a fixed-height row pairing one NMOS and one PMOS transistor that share a gate, tiled in a grid to build logic blocks. The key dimensions are contacted gate pitch (CGP), cell height (CH), fin count, and the lower-metal routing grid. To measure density, we use the Bohr metric: a weighted average of NAND2 gate area (60%) and scan flip-flop area (40%). This represents a realistic mix of combinational and sequential logic. This metric has its limitations, especially for complex cell layouts like TSMC’s FinFLEX, which alternates cells with different fin counts. Even so, it is the best metric for a pure process-level comparison. Another important measurement is the fin pitch; it refers to the distance between two fins of the same transistor. In a FinFET process, multiple fins are used in each transistor to increase the drive current and thus performance. TSMC N6 ships both a high-density (HD) library with 2 PMOS and 2 NMOS fins per cell, and a high-performance (HP) library with 3 of each. More fins under the shared gate mean more effective channel width. HP cells switch harder at the cost of area. Designers mix the two on a die, primarily spending HP cells on timing-critical paths, and matching their PPA targets. In the Cortex-A55 core of the Helio G99, we found a cell height of 240 nm for the HD cell. MediaTek has used HD cells in the G99 to minimize die size and thus cost. As an SoC for budget smartphones at ~$100, this is essential. By contrast, we found only one library in the Kirin 9030, with 2 NMOS and 2 PMOS fins. This suggests a narrower library strategy than TSMC N6, where both HD and HP libraries are widely used. This likely reflects the smaller customer base and the more constrained domestic design and electronic design automation (EDA) ecosystem. In all three CPU cores of the Kirin 9030, we found cell heights of 228 nm, 5% smaller than on N6. This is also a reduction of 9.5% over SMIC N+2’s cell height of 252 nm. SMIC N+3 and TSMC N6’s HD library both feature a CGP of 57 nm. For SMIC, this is a 9.5% shrink over N+2. In the past, CGP and cell height alone may have been enough to compare transistor density. Now, however, we must consider scaling boosters and DTCO as well. SMIC’s density gain does not come from EUV. It comes from using every available DTCO booster aggressively. First is fin depopulation: reducing the number of NMOS and PMOS fins in each cell. The first FinFET nodes started with 3 or 4 fins for each transistor. SMIC N+3 and TSMC N6 HD both use only 2 fins per transistor, trading drive strength for density. Next is contact over active gate (COAG). By landing the gate contact directly over the active gate, instead of out over the isolation region, the cell height drops. N+3 integrates COAG while N6 does not. Our N+3 gate-cut cross-sections indicate COAG, with the gate contact sitting over the active region, while N6 shows an off-gate contact. Last is single diffusion break (SDB). Diffusion breaks are inserted between cells in the same row to provide electrical isolation, but they also introduce local layout effects (LLE), layout-dependent shifts in electrical characteristics. In the past, a double diffusion break was used, consuming the space of two CGPs. SMIC N+3 and TSMC N6 instead use SDB, saving area but increasing LLE sensitivity. This must be controlled at the process level and accurately modeled in the process design kit (PDK) so that EDA tools can account for it. Overall, SMIC N+3 has a transistor density of 113.4 MTr/mm², slightly above TSMC N6 at 107.7 MTr/mm². Even without EUV, SMIC has achieved density beyond TSMC’s mature N6 node which utilizes EUV. Metal Stack The smallest critical dimension in the teardown is M0; SMIC N+3 uses a 32.5 nm local metal pitch. That is smaller than the 36 nm M0 pitch on Intel 18A in Panther Lake. However, this does not mean that SMIC has a better process than Intel 18A or TSMC N3P. M0 is a local intra-cell routing layer. Its usefulness depends on the full interconnect stack: M1 and M2 pitch, track count, via and line resistance, design rules, mask count, overlay control, and routing flexibility. The 32.5 nm M0 is consistent with self-aligned quadruple patterning (SAQP), whose four-population line-width loading we read coarsely as alternating widths of 21.5 to 24 nm; M1 and M2, at 38 and 40 nm, are consistent with self-aligned double patterning (SADP), a single A/B split. On TSMC N6, M0, M2, and M3 sit at a relaxed ~40 nm and are consistent with SADP-class double patterning, with no need for quadruple patterning. That said, we measure M2 for example at ~43 nm, likely inflated by sparse routing. We do not assign any specific layer to EUV from our cross-sections; the distinction we can draw is double versus quadruple patterning, not lithography wavelength. Transistor-level density in the front-end-of-line (FEOL) sets an upper bound, but the design is ultimately limited by what the interconnect stack can route. The lowest metals are the most important for standard-cell density, but the semi-global and global layers determine how usable that density is at the block and chip level. Two axes are commonly used for chip cross-sections: the fin-cut and the gate-cut. The micrograph above is a fin-cut and shows metals 0 through 3. This axis lets us see the even-numbered metals, with M0 right above the fins. There are two kinds of M0 lines. The first are the power rails; these are wide wires for the VDD and VSS running horizontally at the top and bottom edges of each standard cell. The wide wires measure 55 nm across, more than double the other M0 lines. Their width minimizes resistance and reduces IR drop. The second kind are intra-cell wires, short segments within the cell that connect terminals to M1. These have alternating widths between 21.5 and 24 nm. The M0 pitch is 32.5 nm, a 19% reduction versus N+2 and N6. At this pitch, DUV patterning requires more aggressive multi-patterning, increasing mask count, overlay sensitivity, process complexity and cost. M0 is below what a single DUV-defined spacer (SADP) can resolve, so SMIC cascades a second spacer step (SAQP). The cross-section reflects the cost: the M0 trenches are visibly more re-entrant (narrower at the bottom than the top) than M1 or M2 on the same chip and carry a bright barrier-rich foot where the trench meets the etch-stop layer. That shape is partly the intended damascene profile, as a slightly narrow bottom helps void-free copper fill, but its magnitude at M0 is driven by the tight pitch and the higher trench aspect ratio. Intel 18A supports an M0 pitch of 32 nm, although Panther Lake has only shipped with a looser 36 nm pitch. This is due to Intel’s heavy usage of HP libraries. Among leading-edge nodes, 18A has the loosest M0 pitches due to PowerVia. With power routing moving to the backside, congestion is reduced, and the entire front-side metal stack can be used for signal routing. M2 is the first true inter-cell routing layer. It runs horizontally like M0 but spans across multiple cells to carry block-level signals. The M2 pitch sets the cell’s track height – the number of M2 tracks that fit between the VDD and VSS rails, defining what the library calls a 6-track or 7.5-track cell. This layer is the most important, limiting the routing of entire blocks. SMIC N+3 features a 5.7-track cell. The M2 pitch is 40 nm, a 5% decrease over N+2 and the same as N6. This shrink keeps the pitch at the edge of what is possible with double patterning. Future nodes will need to increase the number of masks for M2 as reducing the number of tracks is much harder due to the limitations in routing. The micrograph above is in the perpendicular direction, the gate-cut, and shows metals 0 through 4. This allows us to see and measure the odd-numbered vertical metal layers. The M1 pitch is 38 nm, 9.5% less than N+2 and 33% less than N6. The M1-to-gate ratio matters because it sets local routing flexibility. N+2 and N+3 use a 3:2 ratio, while N6 uses a 1:1 ratio, explaining the huge differences in M1 pitch. The more M1 lines there are compared with the gates, the more flexibility there is for power and signal crossing within the cell. Routing flexibility enables more complex and better cells. Clean fractional ratios are also preferred as a grid is periodic and improves layouts. The 3:2 ratio gives SMIC more local routing flexibility than a strict 1:1 grid, but it also complicates layout and patterning. This is a DTCO choice, with SMIC increasing process complexity to recover density and routability without EUV. This 3:2 ratio is not very popular in the leading-edge nodes. TSMC has only used it on N7+, the N5 family, and the short-lived N3(B). They have switched back to a 1:1 ratio for N3E. Intel has only used it on the 10 nm/Intel 7 family, with Intel 4, 3 and 18A all using a 1:1 ratio. Samsung is the only one still using a 3:2 ratio at the leading edge, using it in the SF4 and SF3 families. It remains to be seen if SMIC will remain at a 3:2 ratio or move to a 1:1 ratio with its future nodes. The industry is still actively exploring these local-routing ratios. At VLSI 2026, imec will be presenting work on even higher ratios, including a 2:1 scheme that can reduce area by up to 14%. We will be covering the conference in a future newsletter article. Subscribe We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. The final local interconnect layer for N+3 is M3, with a pitch of 44 nm. The M3 pitch is the same as on N+2 and 10% larger than on N6. The semi-global layers carry the majority of block-level signal routing. They have a coarser pitch than the lower local layers. On leading-edge nodes, they are designed to sit at the limit of DUV single patterning. M4 through M11 pitches were found divided between 80–82 nm (M4–M6), 128 nm (M7–M10), and 148 nm (M11). Given limited sampling, it is possible these are divided further in dense routing areas. At the top are two giant metal layers, M12 and M13. These have kept the same pitches as N+2 at 1920 nm and 4600 nm respectively. While the lower layers’ pitches are generally fixed by the process and library, the upper layers vary much more in pitch and count, depending on the design. Even two smartphone SoCs on the same process can have wildly different metal stacks. The Helio G99 carries fewer routing layers, reaching coarse metal pitches of 850 nm by M9, while the larger and higher-performance Kirin 9030 keeps fine pitches until M11. SRAM At the leading edge, SRAM is much more difficult to scale than logic. TSMC’s latest nodes have seen little to no bitcell scaling, while logic still has more DTCO levers to pull. While looking for other logic libraries in the GPU compute units, we stumbled upon the SRAM. The most common type of SRAM has 6 transistors (6T), but this cell had 8 transistors (8T) instead. 8T SRAM adds two transistors to form a dedicated read port. Unlike a 6T cell, where reading disturbs the storage, the decoupled read port removes read-disturb, improving read stability and letting the cell be pushed harder for performance. At first glance, the cut looked like an unusual logic library, with each cell row having 3 fins of one polarity and 5 fins of another. The rows also alternated in orientation. Energy-dispersive X-ray spectroscopy (EDS) resolved our confusion. The cut had not landed on the GPU logic, but on the SRAM macro beside it. The unusual fin pattern was due to the SRAM library. We return to EDS in the process flow analysis behind the paywall. SRAM libraries are not like traditional logic libraries. Due to the unequal number of PMOS and NMOS transistors, they require specialized rules and layout libraries. They do not need the flexibility of logic libraries, so they are hyper-optimized for one purpose: dense, reliable memory. The SRAM cell we found is a 1:2:2-2:2 cell. This means there is 1 fin per pull-up (PU) PMOS transistor, and 2 fins per pull-down (PD) and pass-gate (PG) NMOS transistor. These 2 PU, 2 PD and 2 PG transistors would usually form a single 6T high-current cell (HCC). An 8T HCC adds a read-pull-down (RPD) and a read-pass-gate (RPG) NMOS transistor, each with two fins. We measured a cell height of 406 nm, which brings the bitcell size to 0.0463 µm². That is a theoretical peak density of 21.6 Mib/mm². We estimate that a 6T HCC would have a cell height of 292 nm and a size of 0.0337 µm². This is ~12% larger than a 6T HCC on Intel 3 and 4. We also estimate the 6T high-density cell (HDC) to have a cell height of 228 nm and a size of 0.0260 µm². This is coincidentally the same as the logic standard-cell height measured earlier. The estimate puts the cell near Samsung 7LPP/5LPP and slightly below TSMC N7/N6. That is a theoretical peak density of 38.5 Mib/mm². 6T HDC is arguably the most important cell as it is used for the largest caches in a chip, the L3 caches and system-level cache (SLC). Both the Kirin 9020 and 9030 have split the SLC into 4 banks to raise total SLC bandwidth. In the Kirin 9030, the SLC increased from 2 MiB to 3 MiB per bank. Correspondingly, the number of arrays within the bank also increased by 50%, from 16 to 24. Each array can store 128 KiB and forms an orderly pattern on the die shot. From the Kirin 9020 to the Kirin 9030, the area of a 128 KiB SLC array decreased from 0.0477 mm² to 0.0392 mm², an 18% shrink. The achieved density is 25.5 Mib/mm², 66% of the theoretical maximum. While the SLC was quite similar across both chips, the L3 has seen some major changes, particularly in terms of its layout. The total capacity also went up from 10 MiB to 12 MiB. Much like the SLC, the L3 is also split into 4 banks. In the Kirin 9020, an L3 bank consisted of 16× 128 KiB arrays and 16× 32 KiB arrays. However, an L3 bank in the Kirin 9030 instead consists of 48× 64 KiB arrays. In the Kirin 9020 L3, a 128 KiB array was 0.0513 mm² and a 32 KiB array was 0.0154 mm². The size of the 128 KiB array is different on the L3 and SLC as the assist circuitry for the two arrays differs depending on their purpose. In the Kirin 9030 L3, a 64 KiB array is 0.0210 mm². Although not a like-for-like comparison, normalized for capacity, it is 18% smaller than the 9020’s 128 KiB L3 array and 31% smaller than its 32 KiB L3 array. The achieved density is slightly lower than the SLC, at 23.8 Mib/mm², 62% of the theoretical maximum. Unlike the L3 and SLC, the prime cores’ private L2 cache uses a 2-bank design. As the prime cores’ L2 is latency-critical, it likely uses 6T HCC instead of 6T HDC. The 9020 has 16 arrays in each bank while the 9030 has 32. Each array has a capacity of 32 KiB. A 32 KiB array in the L2 shrank from 0.0171 mm² to 0.0142 mm², ~17% smaller. The density is 17.6 Mib/mm², ~59% of the theoretical maximum for 6T HCC. SRAM scaled well from N+2 to N+3, shrinking by ~19%, close to the theoretical logic shrink. The caveat is that N+2’s bitcells were unusually large, bigger than comparable 7 nm-class nodes, so part of the gain is catch-up rather than true scaling. With the insights from STEEL’s teardowns, we will be doing a deep dive into SRAM in a future newsletter article. Subscribe Everything above came out of a single STEEL teardown: die annotation, block-level area analysis and TEM cross-sections through logic and SRAM. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Future Roadmap The same cross-sections that pin down N+3 also show where SMIC can go next. Although N+3 is already close to the practical limits of DUV multi-patterning in several layers, SMIC still has a few scaling levers left. A theoretical N+4 would likely start with cell height. N+3 uses 5 M0 tracks between its power rails. Moving to 4 M0 tracks, as on SMIC N+2 and TSMC N6, could reduce cell height by roughly 15%. The routing grid is only one side of the shrink; the front end also must fit into the smaller cell. One possible FEOL lever is reducing the p-to-n isolation spacing from two diffusion grid units to one. Intel used this scaling booster on Intel 4, and TSMC did so on its N3 family. This path trades layout flexibility for density. Fewer M0 tracks reduce local routing resources, while tighter p-to-n spacing raises integration and design-rule difficulty. M2 is also constrained by the cell height shrink. For SMIC to maintain a ~5.7-track cell, M2 would need to move toward ~35 nm. That would move another layer into SAQP territory. SMIC could also reduce the CGP from 57 nm to 54 nm. Intel reached a similar CGP on Intel 10 nm/Intel 7 without EUV. The local interconnect is also tougher. If SMIC keeps the 3:2 M1-to-gate ratio, M1 would need to shrink to 36 nm and would likely require SAQP as well. If SMIC moves to a 1:1 ratio, M1 could relax to 54 nm, but it would give up routing flexibility. Under this theoretical path, we estimate that SMIC N+4 could reach a cell height of 198 nm and a CGP of 54 nm, implying a Bohr density of 137.8 MTr/mm², on par with TSMC N5 or Samsung SF4. However, the difficulty is cumulative. Each step is individually plausible, but together they make N+4 harder than the transition from N+2 to N+3. It will likely take longer, cost more, and carry less process margin. A theoretical N+5 would require a larger integration shift. One possible path is backside contacts (BSCon), moving power routing and source/drain contacts to the backside, which would reduce front-side routing pressure and enable another reduction in cell height. The front-side metal pitches could relax to reduce the process complexity. M0 would likely relax slightly to ~34 nm, and M2 and M4 pitches could relax further. CGP is unlikely to shrink much further. Even with EUV, 48 nm has been the practical limit for yield and process control. This approach would allow N+5’s cell height to fall to 170 nm and its CGP to 53 nm. This implies a Bohr density of 163.6 MTr/mm², on par with Intel 18A’s HP library. However, this would not make N+5 cost-competitive with the leading edge. It would reach a similar density through a much more expensive route. The integration difficulty rises sharply, with new process flows for backside alignment, wafer thinning, contact reveal, and backside metallization. Past this point, standard density and interconnect scaling become increasingly unattractive. That is where Huawei’s roadmap stops looking like a normal foundry roadmap and starts looking like a packaging roadmap. At ISCAS 2026, Huawei unveiled its tau (τ) scaling law, reframing process scaling in the time domain. τ is the time cost of data movement and processing: switching delays in transistors, RC signal propagation delays in circuits, compute, memory, and networking latency. Outside Huawei’s terminology, this is called system-technology co-optimization. This is Huawei’s answer to its lack of EUV lithography. Without EUV, planar density cannot keep pace with TSMC, Intel, or Samsung. If transistor density cannot shrink further, Huawei’s alternative is to shorten wires, reduce buffering, and stack logic vertically. “LogicFolding”, Huawei’s implementation of this new scaling idea, is, in practice, an aggressive 3D stacking approach. AMD V-Cache places SRAM above or below a CPU die. AMD’s MI350X places active interposer dies (AIDs) underneath accelerator and compute dies (XCDs), with the AIDs handling cache, IO interfaces, the network-on-chip (NoC) and embedded metal-insulator-metal (MIM) capacitors. With LogicFolding, parts of the same logic block are split across multiple active dies bonded face-to-face at ultra-fine pitch. This allows Huawei to shorten some critical paths and reduce buffer overhead, not merely add cache capacity or offload the IO and interconnect. Shortening wires is where the higher clocks come from. A large share of a modern core’s delay and energy budget goes into driving long interconnects and the repeater buffers along them. LogicFolding distributes a block’s critical-path gates across multiple stacked tiers bonded at a very fine pitch, so the bond interface behaves like an additional metal layer and the longest paths get shorter. That is how Huawei expects to recover frequency and efficiency it cannot get from the process alone. Huawei’s roadmap shows its intent. Prime core frequency is targeted to rise from 2.75 GHz in the Kirin 9030 to roughly 5 GHz by 2031, far beyond what planar scaling alone could deliver. Prime cores with 3.1 and 3.39 GHz clocks are being tested in its labs, although their power consumption is unknown. Beyond that, chips are in the design, simulation or pathfinding phase, meaning the frequencies are targets. However, the direction matters more: LogicFolding also helps with performance, not just density. The catch is that Huawei’s density claim is not directly comparable to foundry densities. A stacked design can report more transistors per package footprint by adding active layers, even if each patterned die remains well behind TSMC or Intel in front-end density. This is how Huawei can claim to reach foundry 14A-equivalent density by 2031. This is not a like-for-like foundry comparison, with Huawei using stacked logic and measuring density per package footprint. On a normalized Bohr-density basis, SMIC N+3 is ~114 MTr/mm², 38% less than Intel 18A’s HD library. Huawei’s 3D roadmap closes the gap by stacking active logic, reaching 215 MTr/mm² by 2030. In 2031, the roadmap density jumps to 295 MTr/mm², implying either a third active layer, partial EUV insertion or aggressive planar DUV scaling. Huawei’s methodology makes other foundries look much denser as well. Applying it to AMD’s MI450X with an N2 top die on an N3P base die yields a theoretical density of 460.2 MTr/mm² in 2026, compared with Huawei’s 295 MTr/mm² in 2031. This Kirin 9030 does not use LogicFolding, remaining in a conventional mobile SoC package. Instead, it forms the baseline for how far Huawei and SMIC can push planar scaling. Future teardowns of Kirin and Ascend chips will show both planar logic density and Huawei’s hybrid bonding solutions. Export controls changed China’s optimization problem rather than ending it. EUV restrictions raised the cost and complexity of leading-edge manufacturing without freezing it. SMIC reaches N6-class logic density through DUV immersion, SAQP and DTCO, while Huawei shifts more of the burden onto architecture, packaging and system-level integration. Future nodes will be tougher. N+3 still had room to tighten local metals and reduce cell height and CGP. Further scaling without EUV leaves fewer levers. More aggressive multi-patterning adds masks and overlay error. SMIC can keep pushing DUV, but each step will get more expensive and less forgiving. The design side is just as critical. Huawei had domestic EDA tools and flows before the Kirin 9030, with the Kirin 9000s, 9010 and 9020 making that clear. Huawei was able to ship multiple consumer SoCs on SMIC N+2 and N+3 while cut off from the Western EDA stack. US export controls restricted EDA tools for advanced chips in 2022 but did not target tools for more mature chips. In 2025, the US government briefly placed much broader restrictions on EDA software from Synopsys, Cadence, and others, before lifting them less than two months later as part of a trade deal tied to rare earths. Huawei has been unable to access those tools because it remains on a US trade blacklist. That forced Huawei, SMIC and Chinese academic institutions to build their own tools and flows. Researchers at Peking University recently announced a prototype EDA tool for Huawei’s LogicFolding architecture, which requires a new flow to handle the multilayer layout and floorplan. This is not the same as replacing the full Synopsys or Cadence stack, but it shows where domestic EDA is headed: toward tighter co-optimization between architecture, process and packaging. These advances are also diffusing into the Chinese ecosystem. SMIC is licensing its N+2 and N+3 processes to HLMC/Hua Hong at the government’s direction rather than by choice. If the same process learning feeds into Ascend accelerators for AI training and inference, the choke point shifts from one named fab to an ecosystem. Alibaba’s T-Head silicon arm and Cambricon, a Chinese AI chip designer that is expected to supply ByteDance, could also be major beneficiaries. Sanctions aimed at SMIC alone become less effective once the manufacturing knowledge has spread to other fabs and design houses. China is not closing the gap with Intel, Samsung and TSMC. The teardown shows the opposite in several places: no EUV, no backside power, higher process complexity, and visible trade-offs. But China is still advancing. If domestic chips become good enough for phones, inference, networking and security-sensitive workloads, they can matter strategically without matching TSMC at the leading edge. Behind the paywall, we show what else STEEL can do, with material and process flow analysis of SMIC N+3, and analysis of the Kirin 9030 package. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline, access the full Kirin 9030 and SMIC N+3 analysis or to commission a custom teardown, contact sales@semianalysis.com.
Braves look to stop slide in game against the Mets
Atlanta Braves (45-24, first in the NL East) vs. New York Mets (31-38, fifth in the NL East) New York; Saturday, 4:10 p.m. EDT PITCHING PROBABLES: Braves: Martin Perez (4-3, 3.02 ERA, 1.06 WHIP, 47 strikeouts); Mets: Sean Manaea (1-1, 5.02 ERA, 1.44 WHIP, 45 strikeouts) LINE: Mets -113, Braves -106; over/under is 8 1/2 runs BOTTOM LINE: The Atlanta Braves head into the matchup with the New York Mets as losers of three straight games. New York has gone 17-17 in home games and 31-38 overall.
UGA’S ADAEJAH HODGE SHATTERS SHA’CARRI RICHARDSON’S NCAA 100M RECORD WITH FIFTH-FASTEST TIME IN WORLD HISTORY
The Panam Sports ambassador never let up. From the moment Adaejah Hodge […]
Vanderbilt Health and Fifth Third Bank partnership gave lucky families another bundle of joy
The 53 Babies campaign gave babies born on May 3 at three Vanderbilt Health hospitals $1,053 toward a 529 college savings plan.
Matt Damon is ready to wake up the “Bourne” franchise and is looking for ideas
Damon was regularly churning out entries in the action series every three to five years, but it's been 10 years since the fifth and last film, "Jason Bourne."
Saints blank Mud Hens for second-straight win
Five pitchers combined on a four-hit shutout as St. Paul made it two wins in a row at Toledo with a 1-0 victory Thursday night. Austin Voth made his second start for the Saints. He didn’t qualify for the win, but struck out eight batters while allowing three hits and four walks over 4 2/3 innings of work. Drew Smith relieved him with two on and two out in the fifth and extinguished the Mud ...
What is BYU QB Bear Bachmeier’s Ceiling?
2025 was one of the best seasons in BYU football history. They won 12 games for just the fifth time in school history. They made the Big 12 Conference Championship Game and won an exciting Pop-Tarts Bowl over Georgia Tech. They finished ranked No. 11 in the final AP poll. Only three BYU teams ever, […]
Red Sox Pitcher Aroldis Chapman Addresses Trade Rumors
Aroldis Chapman is putting together another impressive season with the Boston Red Sox. The Red Sox are 27-39 and sit in fifth place in the American League East. The lefty has spent the past two seasons in Boston and has produced a 1 ERA over 81 innings with the team.
Tigers hit 6 homers in 11-0 rout of Twins
Leading 2-0, Torkelson hit a two-run shot in the fourth inning for his 10th of the season. Torres made it 5-0 in the fifth before Keith hit a two-run shot for his first of the year in the sixth. Greene in the seventh and McKinstry added solo shots before Pérez capped the surge with a two-run shot to left-center in the eighth.
House Dems Ilhan Omar and Sarah McBride mock Republican Nancy Mace over gubernatorial primary drubbing
Reps. Ilhan Omar and Sarah McBride mocked Rep. Nancy Mace after she placed fifth in the South Carolina GOP gubernatorial primary contest.
Nancy Mace's political career is up in the air after finishing last in South Carolina primary
After a decade of roiling South Carolina and national politics, Rep. Nancy Mace finished a distant fifth in her state's Republican primary for governor.
Nancy Mace's unpredictable career is up in the air after finishing last in South Carolina primary
Rep. Nancy Mace has finished a distant fifth in South Carolina's Republican primary for governor, leaving her political future uncertain.
Three of four Republicans who forced the release of the Epstein files are now out of jobs
With GOP Rep. Nancy Mace’s embarrassing fifth-place finish in the South Carolina gubernatorial primary Tuesday, three of the four House Republicans who forced the release of the Jeffrey Epstein files will soon no longer hold elected office.
Business Restructuring Review Vol. 25 No. 3 May-June 2026
In This Issue Texas Bankruptcy Court Adopts Barnet Rule Requiring Foreign Debtor to Have U.S. Assets to Be Eligible for Chapter 15 Relief In In re Siu-Fung Ceramics Holdings Limited, No. 24-33299, 2026 WL 382424 (Bankr. S.D. Tex. Feb. 10, 2026), the court denied petitions for chapter 15 recognition of Hong Kong bankruptcy and liquidation proceedings commenced on behalf of an individual debtor and a group of companies that he owned or controlled. According to the court: (i) the corporate debtors' Hong Kong liquidation proceeding was not eligible for chapter 15 recognition because the attorney retainer upon which such relief was based was not funded until nine months after the chapter 15 petition date; and (ii) the individual debtor's Hong Kong bankruptcy case could not be recognized because the debtor's "center of main interests" on the chapter 15 petition date was not in Hong Kong, and he did not even maintain an "establishment" there. [read more …] Southern District of Texas Clarifies Post-Purdue Course for Consensual Third-Party Releases and Gatekeeping Provisions In In re Container Store Group, Inc., 676 B.R. 356 (S.D. Tex. 2026), appeal filed, No. 26-20166 (5th Cir. Apr. 14, 2026), cross appeal filed, No. 26-20166 (5th Cir. Apr. 24, 2026), the U.S. District Court for the Southern District of Texas addressed consensual third-party releases and gatekeeping provisions in the aftermath of the U.S. Supreme Court's ruling in Harrington v. Purdue Pharma L.P., 603 U.S. 204 (2024). Consistent with existing Fifth Circuit precedent, the court confirmed that, in appropriate circumstances, consent for third-party releases may be obtained through a creditor's failure to opt out of granting that consent. But, the court ruled, consent through an opt-out mechanism essentially can never be inferred for creditor classes that stand to receive no recovery under a chapter 11 plan and that are deemed to reject the plan by operation of applicable bankruptcy law. Instead, those classes must affirmatively opt in to any release. The court also narrowed and remanded the bankruptcy court's acceptance of a broad gatekeeping provision, ruling that such provisions must correspond to the restrictions established by Fifth Circuit precedent. [read more …] Delaware Bankruptcy Court: Initial Transferee Need Not Be Defendant in Fraudulent Transfer Avoidance and Recovery Litigation The Bankruptcy Code gives a bankruptcy trustee the power to avoid asset transfers that are either made with the intent to defraud creditors or that are "constructively" fraudulent because an insolvent debtor did not receive adequate value in exchange. The Bankruptcy Code also permits recovery of an avoided transfer from not only the initial recipient, but also from subsequent transferees. Courts disagree over whether a transfer must actually be avoided before the trustee can seek recovery from a subsequent transferee and whether the initial transferee must also be a defendant in the recovery litigation against a subsequent transferee. The U.S. Bankruptcy Court for the District of Delaware weighed in on this debate in Phillips v. SS Associates LLC (In re ONH AFC CS Investors, LLC), No. 23-10931 (CTG), 2026 WL 312892 (Bankr. D. Del. Feb. 4, 2026). The court adopted the majority view, ruling that the initial transferee need not be a defendant in avoidance and recovery litigation against a subsequent transferee, but that the trustee must establish the elements necessary to avoid the initial transfer as part of the recovery litigation. [read more …] New York Bankruptcy Court Weighs In on Adequate Assurance of Future Performance under Assigned Leases and Chapter 11 Plan Exculpation Provisions In order to assume and assign an executory contract or unexpired lease, a bankruptcy trustee must cure most defaults under the agreement and provide "adequate assurance" of the assignee's future performance. However, the Bankruptcy Code provides no guidance as to the meaning of "adequate assurance" other than with respect to shopping center leases. In In re Broadway Realty I Co. LLC, No. 25-11050, 2026 WL 147505 (Bankr. S.D.N.Y. Jan. 19, 2026), the U.S. Bankruptcy Court for the Southern District of New York examined this issue in connection with a proposed assignment of thousands of residential leases as part of a free-and-clear sale of debtors' properties. The court held that "adequate assurance" does not mean a guarantee of the assignee's future performance, but merely demonstration that the assignee has the ability to satisfy the underlying obligations. The bankruptcy court also ruled that an exculpation provision in the debtors' chapter 11 plan exonerating non-estate fiduciaries from liability for actions taken in connection with the chapter 11 case was unobjectionable, provided it was limited in scope to postpetition conduct and actions taken in connection with implementation of the plan after its effective date. [read more …] Newsworthy Corinne Ball (New York) (Hall of Fame), Bruce Bennett (Los Angeles), Carl E. Black (Cleveland), Jeffrey B. Ellman (Atlanta), Brad B. Erens (Chicago), Gregory M. Gordon (Dallas), Heather Lennox (Cleveland/New York), Joshua M. Mester (Los Angeles), and Kevyn D. Orr (Washington) were included in the 2026 edition of Lawdragon 500 Leading Bankruptcy and Restructuring Lawyers. The Daily Business Review selected Isel M. Perez (Miami) as an "On the Rise" winner for the Florida Legal Awards. The Florida Legal Awards annually recognize those who have made significant contributions to the legal industry in Florida. Dan T. Moss (Washington/New York) was inducted as a Fellow in the 37th Class of the American College of Bankruptcy at its Annual Meeting in March 2026 in San Antonio, Texas. Christine Borries (Munich) was ranked in the practice area Restructuring/Insolvency in the 2026 edition of Chambers Germany. The 2027 edition of The Best Lawyers in Singapore™ recognized Sushma Jobanputra (Singapore) in the practice area Insolvency & Reorganization. The restructuring transaction involving Eissmann Automotive North America, Inc. received the "2025 Turnaround of the Year (Large Company)" at the Turnaround Management Association (Detroit) Annual Awards Reception. T. Daniel Reynolds (Cleveland) and Nick Buchta (Cleveland) represented subsidiaries of Eissmann Group Automotive in connection with the parent company's German insolvency proceedings. Roger Dobson (Sydney) is among 40 Jones Day lawyers recognized by The Best Lawyers in Australia 2027 for his contributions in Banking and Finance Law; Distressed Investing & Debt Trading; Insolvency and Reorganization Law; Litigation. An article written by Corinne Ball (New York) titled "Ard Finance—A Global Enterprise Combining an LME With a Foreign Insolvency Proceeding and Chapter 15" was published in the April 21, 2026, edition of the New York Law Journal. An article written by Alex Sapp (New York) titled "Recent Developments in Section 510—Subordination" was published in the 2025 edition of the Norton Annual Survey on Bankruptcy Law. An article written by Brad B. Erens (Chicago) titled "New York Bankruptcy Court Approves Insider DIP Litigation Financing" was published on April 6, 2026, by Lexis Practical Guidance. An article written by Corinne Ball (New York), Dan T. Moss (Washington/New York), David S. Torborg (Washington), and Isel M. Perez (Miami) titled "New York District Court Affirms Narrow Scope of 'Public Policy Exception' in Chapter 15 Cases" was published on April 6, 2026, by Lexis Practical Guidance. An article written by Jeffrey B. Ellman (Atlanta) titled "Statutory Cap on Lease Rejection Damage Claims in Bankruptcy Applies to Solvent Debtors" was published on April 6, 2026, by Lexis Practical Guidance. An article written by Trisha L. Mowbray (Real Estate; Chicago) and Ryan Sims (Washington) titled "Chapter 11 Plan that Abridged Non-Debtor Lessee's Rights to Remain in Possession After Rejection Unconfirmable as Having Been Proposed in Bad Faith" was published on April 6, 2026, by Lexis Practical Guidance. Lawyer Spotlight: Ben Rosenblum Ben Rosenblum, a partner in the New York Office, represents debtors, creditors, and other parties in out-of-court restructurings and court-supervised proceedings, including chapter 11 cases, municipal bankruptcies, international insolvency matters, and stockbroker liquidations. His experience spans industries such as manufacturing, shipping, mining, aviation, energy, real estate, and telecommunications. Ben's notable debtor representations include Peabody Energy, the City of Detroit, Chrysler LLC, Spansion Japan, and Dana Corporation. Significant creditor representations include General Maritime Corporation, Calpine Corporation, American Home Mortgage, and Murray Energy. He currently represents creditors in Puerto Rico's restructuring. He also has extensive experience advising financial institutions on bankruptcy law as applied to derivatives.
Ciryl Gane used to treat MMA like a sport -- now he knows better
In his fifth career UFC title fight, Ciryl Gane understands the game he's playing at UFC Freedom 250.
ActBlue C.E.O. to Invoke Fifth Amendment in Testimony to Congress
The head of the Democratic fund-raising behemoth was called to testify on Wednesday about reports that she may have misled Congress about how it vets foreign donations.
Once a rising star, Nancy Mace suffers resounding defeat in governor’s race
The South Carolina congresswoman finished fifth in the state’s GOP gubernatorial primary, according to unofficial returns, solidly losing even her own home county and district.
White Sox prospect Braden Montgomery hits walk-off homer in MLB debut as Chicago's resurgent season continues
Montgomery became just the fifth player in MLB history to hit a walk-off homer in their MLB debut
Republicans try to extend winning streak in South Carolina as Graham seeks fifth term
Democrats in both gubernatorial and Senate primaries have criticized what they see as failures of South Carolina's GOP-dominated leadership.
Google patches new Chrome zero-day flaw exploited in the wild
Google has released emergency updates to patch another Chrome zero-day vulnerability that has been exploited in the wild, the fifth such flaw patched since the start of the year.
South Carolina Republicans try to extend winning streak as Sen. Lindsey Graham seeks fifth term
South Carolina voters are narrowing down candidates in key races for governor and U.S. Senate
Josh Naylor's grand slam powers Mariners past Orioles, 6-3
Josh Naylor hit a grand slam during a five-run fifth inning and the Seattle Mariners beat the Baltimore Orioles 6-3 on Monday night. Randy Arozarena had three hits for the AL West-leading Mariners, who have won 10 of their last 13 games. Baltimore, which was 1 for 9 with runners in scoring position, has lost three in a row for the first time since getting swept May 18-20 at Tampa Bay.
Rob Sand picks western Iowa county supervisor as running mate
Rob Sand's pick for lieutenant governor is Crawford County Supervisor Dave Muhlbauer, a native Iowan and fifth-generation family farmer.