SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " Hera " 2,557 found 🔀 AI-powered Shuffle
Britain Politics Labour
Britain's Prime Minister Andy Burnham delivers his Leader's Speech during the Labour Party Conference in Liverpool, England, Tuesday, Sept. 29, 2026. (AP Photo/Jon Super)
County commissioners approve switch to NDPERS for employee health insurance
Some employees were disappointed that employee contributions were not decreased across the board, as the county may have excess health insurance funds budgeted for next year.
Memorial Health highlights balance training, physical therapy for Fall Prevention Month
With September marking Fall Prevention Month, health care specialists at Memorial Health are urging older adults to take proactive steps to reduce balance-related accidents.
Glorious voices cut through Village Theatre’s cluttered ‘Ragtime’
A maximalist staging of this American dream musical offers much to celebrate and even more to debate.
Business Briefcase: DSI unveils updated logo design
SHENANDOAH — The “Return to Prominence” revitalization group Downtown Shenandoah Inc. has unveiled a new logo, according to its September-October DSI Herald bulletin. “While our previous logo served us well for many years, it was time for a…
ABC News' Will Reeve reveals testicular cancer diagnosis, chemotherapy treatment
ABC News' Will Reeve is seen on the set of 'Good Morning America' on June 9, 2026, on ABC. (Paula Lobo/ABC via Getty Images)
USADA Celebrates 25th Science Symposium by Advancing Detection of Peptides
USADA’s Annual Symposium on Anti-Doping Science marked its 25th anniversary with a focus on peptides and protein therapeutics.
Hannah Pingree campaign returns donations from former Epstein attorney
The contributions to her campaign from Paul Hoffman, first reported by the Portland Press Herald, came in over the spring.
Mountainside Warns of Ketamine Risks at American Colleges and Universities
NEW YORK--(BUSINESS WIRE)--Sep 29, 2026--
More than 1 million Florida mail ballots were sent out. Votes are trickling in
Supervisors of elections reported that more than 2,200 ballots have already been returned, mostly from voters in the military and overseas.
Trishaween: celebrated or cancelled?
Western Michigan University’s Campus Activities Board (CAB) announced Trishaween with Trisha Paytas on Sept. 1 at Bronco Bash and on Instagram, and the response was immediate.
Business News: Gallet’s Return Heralds Renewed Battle For Mid-Tier Priced Watch Segment
After years of moving up in category and price, inflation overload pushes some Swiss brands and clients back to the middle.
Thryv Names Robin Brenner SVP of Ecosystems and Partnerships
DALLAS--(BUSINESS WIRE)--Sep 29, 2026--
Princeton Equity Group Raises $1.3 Billion Fund III at Hard Cap
PRINCETON, N.J. & DALLAS--(BUSINESS WIRE)--Sep 29, 2026--
Amica Ranked #1 in Homeowners Insurance in JD Power 2026 Study
LINCOLN, R.I.--(BUSINESS WIRE)--Sep 29, 2026--
Minaris Evolves Business Model with Addition of Dedicated Viral Vectors Business Unit
/PRNewswire/ -- Minaris, a global cell and gene therapy (CGT) CDMO and multimodal contract testing organization, today announced the addition of a dedicated...
Democrats to probe lucrative Trump family business deals if they win midterms
Democrats to probe lucrative Trump family business deals if they win midterms - Nation and World News | Hawaii Tribune-Herald
Darby Fox warns of smartphone, AI dangers to youth mental health
Child and adolescent family therapist Darby Fox warns of youth mental health risks linked to early smartphone ownership and AI companionship. Fox explains studies connecting technology to higher eating disorder risks and loneliness.
FTSE 100 rises as AstraZeneca lifts healthcare sector
London's FTSE 100 rose on Tuesday, lifted by pharmaceutical stocks after AstraZeneca agreed to take a $2 billion stake in Summit Therapeutics to advance cancer research.
Lumo Art & Tech Festival Announces Full Programme, Featuring Björk
OULU, Finland--(BUSINESS WIRE)--Sep 29, 2026--
Hermiston students show progress in math, science test scores
HERMISTON — Hermiston School District students showed improvements over last year in math and science, while scores decreased in English Language Arts, according to results from the 2025-26 Oregon Statewide […]
Could psychedelic therapy become NHS treatment for mental health?
Could hallucinogenic drugs become part of mainstream NHS care to treat depression?
Healey awards $40M in tax incentives to life science company, expected to create 1,600 jobs
Nearly $40 million in tax incentives went out to 38 life science companies in Massachusetts, a move state leaders say is expected to create over 1,600 jobs in the industry.
Kamin Science Center kicks off 35th Anniversary with an addition
PITTSBURGH — Pittsburgh’s most visited museum — the Daniel G. and Carole L. Kamin Science Center — is marking its 35th anniversary with an addition to one of its most beloved experiences. The Miniature Railroad and Village has reopened with an exact replica of the Andrew Bayne Memorial Library in Bellevue, Pa., continuing a tradition […]
‘The Attic’ is entrancing
The world premiere of “The Attic: Things I’ve Seen While Lying on My Back,” which is kicking off Goodman Theatre's 101st season, is hard to describe but beautiful—and breath-taking—to watch.
Bioblitz: Lakeshore Nature Preserve utilizes citizen science to document biodiversity
The University of Wisconsin Lakeshore Nature Preserve hosted its second annual Bioblitz event Sept. 26. The goal of the event was to document as many species at the preserve as possible over a 15-hour period, according to Lakeshore Nature Preserve Director Brad Herrick. With this documentation of everything within the 300-acre area, the preserve aims...
PNB’s ‘Serenade’ made the audience gasp
PNB's 54th season began with the magical "Serenade" and a cast that didn't disappoint.
7-9- years-old
7-9- years-old – from left, Laken Tyler Thomas received the award for prettiest hair and people’s choice. She is the nine year-old daughter of Nathan and Steffanie Thomas; second runner-up
4-6 years-old
4-6 years-old – from left, second runner-up Kennedy Shanks, the five year-old daughter of Ethan Shanks and Victoria Stanley, winner, Tinley Mae Brooks, the six year-old daughter of Justin and
The annual Pumpkin Festival Pageants
The annual Pumpkin Festival Pageants were held Saturday, Sept. 26 at the DeKalb County Complex. The pageants honored the memory of Eli Harvey, the son of Chad and Kayla Harvey
LEARN Behavioral Entity Sues to Stop MassHealth Medicaid Recoupment
A Massachusetts autism therapy provider has sued 10 public officials and entities to stop a Medicaid recoupment effort that local providers have decried
LEARN Behavioral Entity Sues to Stop MassHealth Medicaid Recoupment
A Massachusetts autism therapy provider has sued 10 public officials and entities to stop a Medicaid recoupment effort that local providers have decried
UConn Health Launches Cutting-Edge CAR-T Cell Therapy Program
New program brings potentially lifesaving treatment for certain blood cancers closer to patients in Connecticut and the region.
Jazz Fest hits all the right notes
The Hyde Park Jazz Festival, in existence since 2007, has been a welcome repository of a wide variety of jazz sounds. This year was no exception.
Union Arts Center takes on Shakespeare classic ‘Hamlet’
Despite a strong central performance, this is not a “Hamlet” for the ages.
Seattle theater has a top-flight performer in Yusef Seevers
In three short years, Yusef Seevers has taken Seattle theater by storm, and he’s just getting started.
Oct. 1 Vallejo/Vacaville Arts-Entertainment Source: Faces and Places
The Vacaville Indivisible rally, “Save Our Democracy — Register to Vote,” was held on Sept. 19 in front of Vacaville City Hall.
October 1 Vallejo/Vacaville Arts-Entertainment Source: Activities
Vallejo Hike Club’s Morning Hike is set for Friday at 7 a.m., at Mare Island Shoreline Heritage Preserve, 167 O’Hara Court, Vallejo.
Late Night Fun with Evolution and Oppenheimer
Bats by the millions would be falling from the roofs of caves if that ankle-locking design, an all-or-nothing proposition, had not come about all at once
Joseph McCulloch hired to oversee business outreach in St. Clair County
Joseph McCulloch will return to the Economic Development Alliance of St. Clair County as vice president of business services on Oct. 1.
Movies to watch in Seattle’s indie theaters in October 2026
Fall brings classics alongside Halloween fare to Seattle’s independent cinemas.
California firm licenses ‘potent’ anti-measles antibodies from Vanderbilt Health for development, clinical testing
Further development could lead to the first monoclonal antibody therapy against the highly infectious measles respiratory virus.
Congo’s Ebola outbreak tops 8,000 confirmed cases as disease remains out of control
The World Health Organization said last week that the country is running out of health workers.
In 'Open Season' Draymond Green takes you on his mental health journey
Warriors star Draymond Green discusses the docuseries of unscripted therapy sessions, LeBron James, Steve Kerr and more.
Rebuilding Ukraine’s Wounded: Dr Volodymyr Staude on the Science of Military Rehabilitation
By Matthew ParishMonday 28 September 2026The Lviv Herald interviews the head of rehabilitation at Kharkiv’s Sytenko Institute about blast injuries, prosthetics, virtual reality, the limits of early rehabilitation and the new medical science emerging from Ukraine’s war.Kharkiv is a city in which war and science live remarkably close to one another. The missiles and drones that have repeatedly struck Ukraine’s second city are manifestations of a new kind of warfare, but Kharkiv is also one of Ukra
School of Medicine and Public Health receives grant to investigate links between Alzheimer’s environmental exposures
The Neighborhoods Study from the Center for Health Disparities Research at the University of Wisconsin School of Medicine and Public Health has received funding from the National Institutes of Health on an upcoming nationwide project, according to director of Center for Health Disparities and Associate Dean for Social Health Sciences and Programs, Dr. Amy Kind in...
Grande Cosmetics Announces Actress Lucy Hale as First-Ever Brand Ambassador
NEW YORK--(BUSINESS WIRE)--Sep 28, 2026--
Meet Eba, the San Juan Island dog that excels at sniffing out orcas for science
The pup who was once abandoned on the steps of a shelter gets a new unique job.
Vetter Expands Global Manufacturing Network to Support Future Customer Needs
RAVENSBURG, Germany--(BUSINESS WIRE)--Sep 28, 2026--
New UMSOM Research Shows Promising Results for Health Care Professionals Using Ketogenic Diet Therapy to Treat Mental Illness
Specialized high-fat, low carbohydrate diets, known as ketogenic metabolic therapy, are showing promising therapeutic benefits for certain mental illnesses in emerging research. Now, a new study from researchers at the University of Maryland School of Medicine’s Maryland Psychiatric Research Center (MPRC) shows that an immersive training program can improve health care provider confidence in using a ketogenic dietary treatment plan for their patients.
Why Cleaning Isn’t the Mental Health Miracle Everyone Believes It To Be - Futura-Sciences
Where the “therapeutic cleaning” idea comes from The belief in cleaning as a kind of moving meditation is tempting: repetitive gestures, a structured task, instant visible results—it all seems reminiscent of mindfulness. This narrative sounds great in theory, but available studies reveal a far more complex picture, one where context...
Walker & Dunlop Arranges $238 Million Refinancing for Miami Multifamily Community
BETHESDA, Md.--(BUSINESS WIRE)--Sep 28, 2026--
Patients Warn That Mental Health Surveillance Could Undermine Care
A 2024 study found that the use of surveillance-based technology in inpatient and acute mental health settings is rising despite little evidence that New research finds patients and nurses fear video monitoring could undermine therapeutic relationships, compromise privacy and dignity, fuel mistrust, and replace human care with surveillance.
How a Miami-area entrepreneur won a $15,000 grant. What you can learn
Six tips from a Miami entrepreneur about winning pitch competitions
Global benchmarks are mixed despite Wall Street's rally finish last week
Global shares are trading mixed Monday after a cooldown in oil prices last week helped U.S. stock close out their first winning week in the last three. Benchmarks are rising
The Healthcare Workforce Gap Is Set to Nearly Double by 2040
CHICAGO--(BUSINESS WIRE)--Sep 28, 2026--
Asian benchmarks are mixed despite Wall Street's rally finish last week
Asian shares are trading mixed Monday after a cooldown in oil prices last week helped U.S. stock close out their first winning week in the last three. Benchmarks rose in
Harriet Slater ready to fight in ‘Outlander: Blood of My Blood’ S2
Playing a passionate woman in 18th century Scotland in the hit prequel “Outlander: Blood of My Blood” has certainly changed Harriet Slater’s career.
Navigating the American Dream: How Integrated Financial Tools, Credit and Rewards Can Help Small Businesses Succeed
(Feature Impact) Owning a small business has been a cornerstone of the “American Dream” for generations. It represents the chance to transform a passion into a livelihood and legacy. However, turning dreams into reality is rarely a smooth or easy process and requires more than ambition alone. Today’s business owners need support and access to tools that enable them to overcome challenges and keep growing.#placement_678081_0_i{width:100%;margin:0 auto;}var rnd = window.rnd || Math.floor(Math.random()*10e6);var pid678081 = window.pid678081 || rnd;var plc678081 = window.plc678081 || 0;var abkw = window.abkw || '';var absrc = 'https://ads.empowerlocal.co/adserve/;ID=181918;size=0x0;setID=678081;type=js;sw='+screen.width+';sh='+screen.height+';spr='+window.devicePixelRatio+';kw='+abkw+';pid='+pid678081+';place='+(plc678081++)+';rnd='+rnd+';click=CLICK_MACRO_PLACEHOLDER';var _absrc = absrc.split("type=js"); absrc = _absrc[0] + 'type=js;referrer=' + encodeURIComponent(document.location.href) + _absrc[1];document.write('');Recent research conducted by the Capital One Insights Center shows 75% of more than 1,000 surveyed small business owners with more than one employee and annual revenues of up to $20 million are confident about the future, and 69% believe their business is actively primed for growth.While this optimism is promising, 47% of business owners still said their operations either stayed the same or became less efficient over the past year, citing issues like back-office friction and fragmented financial systems that make it difficult to get a clear picture of the health of their businesses.If you’re a small business owner eager to grow but not sure how to get there, start with this advice from real small business owners and experts at Capital One.Identify Sources of FrictionBefore you can pour effort into growth, you must understand what barriers are holding you back. Take time to look under the hood of your business to identify where time and energy is being lost.For example, you may be among the 78% of small business owners who feel stressed and uncertain about expense management – think hours spent hunting for receipts, manually entering numbers into software and reconciling accounts. Operational challenges aren’t just a hassle; they also pull attention away from important priorities like serving your customers and planning for growth. “We were focused on making as many candles as possible, especially during the busy season,” said Katie Roering, co-owner of Fontana Candle Co. “A lot of the back-office tasks like procurement, raw material purchasing, forecasting – all the really important things – were done at 3 a.m., 8 p.m. or on Saturday and Sunday, and there really just was not enough time in the day to get everything done that we needed to. We just knew as we continued to grow, we needed to streamline our processes, build out our team and keep moving forward.”Use Integrated Tools to Manage FinancesInstead of balancing 10 different tracking and analysis tools, you can turn to one-stop solutions to improve efficiency. Time gets lost when you’re forced to manually gather and interpret relevant data before you’re able to act. You need a platform that handles the busywork for you.Integrated, or “all-in-one,” financial tools – like accounting and bookkeeping platforms with automation capabilities or business credit cards featuring built-in analytical tools – allow you to easily stay on top of cash flow and day-to-day operations. For small businesses where every hour and dollar makes a difference, consolidating and automating systems can have an immediate impact. In fact, 51% of survey respondents said integrated tools have already fueled their growth.Leverage Credit Access and Rewards WiselyGrowth requires capital, so access to credit is a game-changer for many business owners, with 77% describing it as a key factor in achieving business resilience. Having funds accessible when you need them makes your business more capable of weathering storms such as equipment failures and seasonal slowdowns. It also puts the power in your hands to act when an exciting opportunity presents itself, like an inventory flash sale or the chance to advertise in a new market.Access to credit comes with another advantage: rewards. By using credit cards for your daily business expenses, you can earn cash back, points or travel rewards. Whether you redeem these to cover everyday expenses, book business trips or reinvest in the business, they can act as a bonus source of income. Learn to maximize rewards like the 84% of small business cardholders surveyed so you aren’t leaving money on the table.To learn more about how small business owners can identify obstacles, employ integrated financial tools and use credit as a tool for growth, read the full report at capitalone.com/about/insights-center.Photos courtesy of Shutterstock
Asian shares trade mixed as oil prices rise
Asian shares are trading mixed Monday after a cooldown in oil prices last week helped U.S. stock close out their first winning week in the last three. Benchmarks rose in
Asian shares trade mixed as oil prices rise
Asian shares are trading mixed Monday after a cooldown in oil prices last week helped U.S. stock close out their first winning week in the last three. Benchmarks rose in
Inside Malaysia's gambit to make its pungent durian the most wanted
Malaysia is pushing to take durian beyond its roadside stalls and family orchards to convince fans of the spiky fruit that its varieties are worth seeking out. A durian experience
Chamber hosts Women in Business luncheon - Sent-trib
FINDLAY — The Ohio Star Quilters of Findlay will meet on Monday at 9:30 am at St. John’s Lutheran Church, 1701 Tiffin Ave.
Nirvana is awarded the 2026 Video Vanguard Award: What to know about the MTV VMAs
Nirvana was awarded the 2026 Video Vanguard Award at the starry 2026 MTV Video Music Awards. Madonna opened the show and was joined by her recent collaborators Sabrina Carpenter and
Madonna opens starry 2026 MTV VMAs, LISA wins first award: What to know about the show
Madonna opened the starry 2026 MTV Video Music Awards. She was joined by her recent collaborators Sabrina Carpenter and Charli xcx. LISA won the first award for best pop. Later
South Texas Health System (@stxhealthsystem)
0 likes, 1 comments - stxhealthsystem on September 27, 2026: "Support Recovery, Strengthen Your Future: South Texas Health System, the Rio Grande Valley's largest integrated healthcare network, is seeking passionate physical therapy professionals to join its nationally recognized inpatient and outpatient rehabilitation teams at STHS McAllen, STHS Edinburg and STHS Heart. Physical therapists play a vital role in helping patients regain strength, mobility and independence following illness, injury or surgery. If you're passionate about empowering patients on their road to recovery, STHS offers an opportunity to make a lasting impact every day. Join a collaborative team dedicated to exceptional patient care and helping individuals return to the activities and quality of life they value most. Ready to move your career forward? View current openings and apply today at the link in our bio.".
Texas clinic owner convicted in $26M military health fraud tied to gold-plated Cybertruck
Kevin D. Curry used TRICARE kickbacks to fund a gold-plated Tesla Cybertruck and lavish parties after billing $26 million in fake TMS therapy claims.
Texas clinic owner convicted in $26M military health fraud tied to gold-plated Cybertruck
Kevin D. Curry used TRICARE kickbacks to fund a gold-plated Tesla Cybertruck and lavish parties after billing $26 million in fake TMS therapy claims.
Harrison: Will Mississippi politicians avoid blame for rising healthcare costs?
Nearly all of Mississippi’s congressional delegation voted against extending the enhanced tax credits or subsidies for the Affordable Care Act Marketplace insurance policies.
Pols & Politics: Minogue closing the gap in new poll, Healey still favored in general election
Gov. Maura Healey remains favored for reelection in November, but not as comfortably as in past surveys as the latest UNH Survey Center poll shows GOP challenger Mike Minogue is closing the gap.
Free Maine’s yards from political yard signs
Doing so may mend fences, clear the air, improve the political climate and even save a few trees.
Your Child’s Hypochondroplasia Care Team
Learn how to build a personalized care team for children with hypochondroplasia, including key specialists, therapy options, and emotional support resources.
New Orleans celebrates Dolly Parton Day, in photos
NEW ORLEANS (AP) — Fans in New Orleans celebrated Dolly Parton Day, declared in honor of the late country music icon, on Sept. 25. There was music, colorful tributes and
Cape Cod restaurant hit with harassment, hoax 911 calls after hosting GOP fundraiser
A Cape Cod restaurant has been inundated by online threats and harassment, even a hoax 911 call resulting in a massive emergency response, in retaliation for hosting a Republican fundraising event.
Gene therapy & health equity in Sickle Cell Awareness Month
Dr. Lakiea Bailey, Executive Director of the Atlanta-headquartered Sickle Cell Community Consortium, joined us for National Sickle Cell Awareness Month to discuss breakthrough medical developments and healthcare disparities affecting sickle cell patients nationwide.
Intel Panther Lake Teardown, 18A, BSPD, GAAFET, SemiAnalysis STEEL
Panther Lake debuts the first commercial implementation of backside power delivery (BSPDN), introduces Intel’s first iteration of gate-all-around (GAA) transistors, and showcases their advanced packaging capabilities with its Foveros-S assembly. With Panther Lake, Intel’s manufacturing arc has shifted from nebulous roadmaps to shipped silicon, a significant milestone on their long road back to competitive semiconductor manufacturing. To evaluate the extent of Intel’s comeback, we tore down Panther Lake. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Our teardown traces 18A from its four-sheet RibbonFETs (Intel’s marketing name for GAAFETs) and gate stacks through contacts, frontside and backside wiring, and the bonded carrier. We explain how these material and integration choices improve gate control and reduce resistance, while adding capacitance, thermal resistance, and process complexity. Our measurements put Panther Lake’s 18A compute logic and TSMC N3E GPU logic at similar logic density. However, 18A does not lead TSMC N3P, N2 or Samsung SF2 in peak density. Panther Lake’s CPU cores are incremental updates, and the high-end GPU still uses TSMC N3E. Panther Lake assembles one compute tile, one GPU tile, and one I/O tile atop a passive base tile using Intel’s Foveros-S advanced packaging. Both compute tile variants use Intel 18A. The Xe3 GPU options are a 4-core GT1 tile on Intel 3 and a larger 12-core GT2 tile on TSMC N3E. Both I/O tile variants use TSMC N6. [1], [2] Our analysis centers on the PTL-U compute tile, both the 4-core and 12-core GPU tiles, as well as the 12-lane I/O tile. In conventional chips, power and signal are routed through the same frontside metal stack towards the device frontend. Power rails consume scarce routing resources near the transistors, while tall via stacks carry VDD and VSS from the coarse upper wires to local rails. Backside power delivery (BSPD) moves the main power network behind the transistor layer, to the backside, separating it from frontside signal routing. We covered BSPD and its impacts in 2024. [3], [4], [5] Intel’s BSPD implementation, branded as “PowerVia”, routes power through dedicated backside metals to nano-TSVs, which connect those rails to local source/drain (S/D) contacts. Implementing that separation requires Intel to build the interconnect stacks from both sides of the wafer. The frontside comprises the M0-M14 signal stack, while the backside comprises the BM0-BM5 power stack. M0 and BM0 are closest to the transistors. The nano-TSVs connect the two sides, but Intel patterns and etches each via from the front after forming the contacts. A narrow via runs from the side of the contact deep into the silicon substrate. Intel then completes the frontside signal metal stack, bonds the wafer to a carrier, flips it and removes the original substrate until the buried via tips are exposed. The backside metal stack is then deposited directly on the revealed vias. The nano-TSV and backside-via profiles taper in opposite directions because Intel forms them from opposite sides of the wafer. The transistor structures form the FEOL. Local contacts and nano-TSVs connect them to the wiring. M0 begins the frontside interconnect stack. The silicon carrier remains attached above the frontside interconnects. It supports the device wafer during substrate removal and backside processing and remains part of the finished chip’s thermal path. PowerVia removes the main power distribution from the congested frontside metals, routing supply through shorter and wider backside wires. Its lateral landing still occupies area in the standard cell, so it recovers less cell area than a direct backside contact. [3] Nano-TSVs beside the logic devices carry VDD or VSS from the backside power network, while signal connections continue upward through the frontside metals. Backside Interconnects Samsung SF2 data is included for comparison to Panther Lake’s within this article. SF2 is the incumbent GAA foundry node but lacks BSPD, serving as a useful reference to evaluate 18A. A full teardown of Samsung’s S26 products, processed on SF2, will be shared soon.Nanosheet-cut EDS comparison. The PowerVia supply path runs from the backside Cu rails through Mo-lined W nano-TSVs to the local transistor contacts. In this cross section, the tapered connection spans roughly 150 nm from the contact level to BM0. The Ta liner confines Cu and promotes adhesion to the surrounding stack; the AlOₓ etch stop controls the next dielectric etch above the rail. Dielectric beneath the ribbons electrically separates the devices from the backside wiring and removes the conducting silicon body below the channel. [6] AlOₓ serves as an etchstop (ES), enabling endpointing and protecting the underlying layers. Low-volatility aluminum fluoride reaction products resist the fluorinated plasma, allowing a thin AlOₓ film to protect the metal while the surrounding low-k dielectric is removed. [6], [7]. While the BM0 and layers above the M1 lines show double AlOx layers, Our SMIC N+3 teardown showed single AlOₓ layers. SMIC uses a simpler local AlOₓ substack, while the remaining cap and etch sequence provide the required landing protection. So why double layers? The closely spaced AlOₓ doublets provide two protected endpoints in the etch sequence. Intel documents an AlOₓ/SiN/AlOₓ stack that explains the benefit. The main dielectric plasma etch stops on the first AlOₓ film; a selective wet clear opens that film; a second plasma etch removes the intermediate SiN and stops on the second AlOₓ film. The final wet clear exposes the metal landing surface. SiN is the intermediate dielectric in Intel’s published example. [8] The second stop protects the metal through a cap breakthrough. Wide openings can etch faster than narrow ones, and etch depth varies across the wafer. Metal under an early-clearing opening would otherwise be exposed while other openings still need more etching. Staged protection widens the process window and reduces metal erosion, corrosion and void formation. [8] TSMC documents AlN/AlOₓ/SiOC/AlOₓ above Cu, with AlN blocking Cu diffusion, and a simpler AlN/SiOC/AlOₓ variant that omits one AlOx film. [9] Levels with different opening sizes, aspect ratios, pattern densities and cap materials need different etch margins. A double AlOx stop is useful where another protected endpoint justifies the added processing. The extra film adds formation, selective opening and cleaning steps, plus another set of interfaces to control adhesion, moisture, and stress. These blanket films are opened through the existing via pattern, so each film does not require another lithography mask. AlOₓ adds parasitic capacitance when it replaces lower-k dielectric; two thin AlOₓ films can nevertheless contain less AlOₓ than one thick film. Total thickness, placement, and theintermediate dielectric determine the electrical cost. Deposition chemistry also changes AlOx permittivity and residual hydroxyl content, which can oxidize the underlying metal. [7], [8], [10], [11] The backside stack separates into relatively fine BM0-BM2 wiring near the devices and coarser BM3-BM5 power distribution. The largest pitch increase occurs between BM2 and BM3. BM0’s pitch closely matches the logic-row height, fitting local power delivery to the cell rows. Higher levels aggregate current through larger conductors: routing density becomes less important than low resistance and current capacity as the network approaches the package. This hierarchy provides wide power wiring for the power delivery network without consuming scarce frontside signal-routing resources. [3] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Frontside Interconnects Intel 18A combines Mo-lined W contacts and nano-TSVs with a separate backside Cu power network. Samsung SF2 keeps power on the frontside, using Ti-based contact interfaces and Ta-based barriers and Co liners around Cu wiring. In 18A standard-cell rows, backside power rails supply the devices through nano-TSVs within the cells, freeing frontside routing resources. Samsung’s M0 accommodates both power and signal connections. From the device toward M0, the connection runs through a Ti-based S/D interface, W contact fill, a Mo-lined W via, and the Cu M0 wire. Mo supplies a conductive nucleation and adhesion layer for W, replacing the resistive TiN liner used in conventional W integration. This increases the effective conduction volume within the feature while retaining W fill and its established polishing, cleaning and etching processes. Intel’s Mo/W patent describes this integration tradeoff. The nano-TSV uses the same Mo-lined W construction in the backside supply path. [12] The move from TiN to Mo is an incremental change. While a full Co or Mo fill can also reduce the volume lost to liners in very small features, it requires new integration schemes that increase complexity and risk. Cu remains attractive for wider wires due to its low resistance. As wires and vias shrink, the diffusion barrier consumes an increasing fraction of their cross-section. [12], [12], [14] Intel uses Co/Ru liners at M0-M1, Co at M2-M4, and Nb at M5-M9. The lower-level liners help Cu adhere and reduce void formation during trench fills. Applied Materials’ Endura has new thermal control that facilitate wetting process, so the thin film continuity is good enough that good capillary pressure will drive Cu atoms to the via bottom without voiding. Intel’s choice to use Nb is particularly interesting. Intel’s Nb patent describes a conductive diffusion barrier intended to reduce the barrier’s contribution to resistance relative to conventional Ta-based barriers, particularly at via bottoms where all current crosses the barrier. The patent pairs Nb in coarser levels with the option of lower-cost PVD processing. [15], [16] The upper metal layers support thicker barriers formed through physical vapor deposition (PVD) despite its worse coverage and uniformity. Meanwhile, the lower metal layers require thinner barriers deposited through conformal atomic layer deposition (ALD). Co/Ru adds another material interface and requires controlled deposition and Cu fill. Changing liners and barriers by metal layer allows Intel to optimize interconnect resistance, process complexity, and reliability. [15, 16] RibbonFET, Intel’s name for its gate-all-around FETs (GAAFETs), replaces the FinFET’s vertical fins with four stacked horizontal silicon nanosheets, allowing the gate to surround the channel on every side. The path to GAAFET begins with the planar transistor. A planar MOSFET places the gate above the channel between its source and drain. Pairing an NMOS with a PMOS transistor creates a CMOS inverter, in which the NMOS pulls the output low for a high input, and the PMOS pulls it high for a low input. The gate must retain electrostatic control of the channel to ensure clean switching. As gate lengths shrank, the drain began to compete with the gate for that control, increasing off-state leakage. Electrostatic control was restored through an architectural evolution that raised the channel into a vertical fin and wrapping the gate around three sides. Called “FinFET”, this new architecture packed more effective channel width into a smaller footprint. Further scaling made it harder to maintain both drive current and leakage within smaller cells, and reintroduced the same problems planar MOSFETs faced. Nanosheet GAAFETs close the fourth side by replacing the vertical fin with a stack of horizontal nanosheets, each surrounded by the gate. The tighter electrostatic control suppresses leakage at shorter gate lengths while stacking adds effective channel width within the cell footprint. In a FinFET process, channel width changes in discrete steps as designers must add or remove whole fins. Nanosheet width can instead be adjusted continuously within the process’s design rules. Wider sheets increase drive current, while narrower sheets reduce capacitance at the cost of drive current. Intel 18A uses stacks of four nanosheets each and varies their widths across logic and SRAM. At the process level, adding more sheets to each stack increases effective channel width and drive current, but complicates fabrication. RibbonFET vs MBCFET Samsung began GAAFET production in 2022 with SF3E, following with SF3 and now SF2. Its ‘MBCFET’ provides a useful structural comparison with Intel’s first RibbonFET implementation. [17] STEEL is digging deeper into SF2, used in the Exynos 2600, and TSMC’s GAAFET N2, used in Apple’s A20 Pro, in upcoming newsletter articles. We’re throwing some teasers on X. Let’s compare Samsung SF2’s MBCFET with Intel 18A’s RibbonFET. Subscribe Even to the untrained eye, Intel’s extra nanosheet is obvious. Intel stacks four ribbons to Samsung’s three. Samsung’s sheets are much wider in these fields, so both sheet count and width matter to the available channel perimeter. Sheet width also changes which silicon surfaces carry current. On conventional (001) silicon, wide nanosheets emphasize the broad top and bottom surfaces, favoring electron transport; the larger sidewall contribution in a narrow sheet favors hole transport. Thinner sheets improve gate control but increase confinement and scattering. This makes width and thickness part of the NMOS/PMOS balance, alongside strain and threshold voltage. [18], [19] GAAFET designs like 18A use different work-function-metal (WFM) stacks for NMOS and PMOS. Around each ribbon, a thin SiOx interfacial layer separates the silicon channel from the HfOx high-k dielectric, with La providing dipole tuning and the WFM wrapping the dielectric. NMOS uses a TiAl-based stack, while PMOS uses TiN WFM. W fills the remaining gate trench, providing a lower-resistivity path where the work-function layers are no longer needed. In this field, the PMOS stacks leave room for W between ribbons, while the NMOS stacks occupy more of those gaps. A silicon-based dielectric marks the P/N boundary, allowing the PMOS and NMOS gates, sharing the same gate trench, to be processed sequentially. Fast logic paths, retention circuits, and SRAM need a family of threshold options. Changing threshold without substantially changing device dimensions, capacitance or fabrication complexity is valuable. FinFET processes typically use different work-function-metal stacks. In a four-ribbon GAA stack, the narrow sheet-to-sheet gap limits how much WFM can fit around each channel. La in the gate dielectric creates interfacial dipoles at the SiOx/HfOx boundary, shifting effective work function and tuning threshold voltage. This gives Intel another control alongside its NMOS and PMOS WFM stacks. Low-threshold devices improve critical-path drive; higher thresholds reduce leakage elsewhere. Dipole tuning is especially useful in GAA because it changes threshold without consuming the narrow intersheet gap with thicker WFM. Precise control of La incorporation, diffusion and interface quality has long been a challenge, limiting viability in high volume production but is now seen from every leading-edge foundry. Intel’s patent describes depositing a dipole-forming oxide above HfOx and annealing it toward the interfacial oxide before completing the work-function and fill metals. This separates threshold tuning from the space available for metal. Newer research addresses the thermal cost: imec’s 2026 dipole-middle research inserts the shifter between two HfOx depositions, shortening the diffusion path while protecting SiOx during patterning. [20], [21]Matched-cut EDS, Intel 18A (left) vs. Samsung SF2 (right). Intel retains raised source/drain epi beneath its contacts, while Samsung recesses W deep into the epi to form a V-shaped Ti-lined interface. The deeper contact increases metal-to-semiconductor area and shortens the current path from the lower sheets, reducing contact and spreading resistance. It also removes epi volume and brings the contact etch closer to the channel ends. Retaining more epi preserves the material available for strain transfer, especially from SiGe into PMOS. These geometries balance contact access against stress engineering and etch margin. [22], [23] Samsung stacks three sheets to Intel’s four ribbons, and both processes use sheet width to tune drive strength. In our Samsung cross-sections, widths range roughly from 19 to 30 nm in the NPU rows and 37 to 50 nm in the CU cell. The Samsung nanosheets taper, with the widest sheet at the bottom and the narrowest at the top. Both processes use HfOx gate dielectric and Ti-based work-function stacks, with Al in the NMOS stack. In the Samsung devices shown here, the dielectric and WFM occupy the intersheet gaps, leaving W above the top sheet. Intel’s PMOS stack leaves more room between ribbons, and W fills those gaps while the thicker NMOS stack leaves W mainly in the upper trench. Gate-stack EDS maps. The W between Intel’s PMOS ribbons provides a conductive path close to the lower gates. Where WFM fills the entire gap, the gate still surrounds the channel, but voltage reaches it through the more resistive work-function films. Thinner WFM and dipole tuning preserve room for low-resistivity fill; Mo and Ru are alternative fill metals being developed for further scaling. [24] A masked, sequential WFM flow explains the different gate heights and inter-nanosheet fill. The proposed sequence below shows how separate NMOS and PMOS work-function steps produce that geometry. Enabled by the BSPDN process, Intel replaces the dense-logic silicon subfin with dielectric, removing the parasitic conduction path below the ribbons and reducing substrate-related capacitance. A retained silicon body as in classical, non-SOI, planar and FinFET designs needs junction and punchthrough-stop engineering to suppress leakage. Dielectric isolation makes that leakage less sensitive to the subfin doping profile but adds removal and fill steps. It also weakens the direct thermal path through silicon, making the contacts, metal stacks and package more important for heat extraction. [24], [26] Fluorine is concentrated around selected Intel device structures in the maps. WF6 is a standard precursor for W nucleation and fill, while barrier films protect adjacent dielectrics from fluorine attack. Low-fluorine W processes reduce the residual-F burden. Chloride-based precursors avoid introducing F during W deposition, but require control of chlorine attack, nucleation and fill quality. The integration target is a continuous, low-resistance W path with a thin protective liner and minimal chemical damage to the surrounding stack. [20], [27], [28] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. We measured cell height, gate pitch, metal geometry, and ribbon dimensions at the XTEM sites shown below. The tables group these dimensions by site and device polarity. Our “sheet cuts” cross the silicon channel and show the ribbons end-on. “gate cuts” run along the channel through successive gates. The 18A logic cell dimensions point to a five-track logic library while the N3E and Intel 3 cell dimensions evidence a seven-track logic library. The DDR-PHY uses wider M0 wires and much larger spacing than core logic. That trades routing density for lower wire resistance and weaker coupling between neighboring nets. The geometry suits the current delivery and coupling requirements of analog, clock, and I/O circuitry. PowerVia lets 18A combine a compact cell height with wider M0 geometry by moving the main power rails off the signal-routing tracks. That relaxes local wire scaling while preserving a small cell footprint. Cell height and gate pitch set the geometric density; pin access and routability determine how much of it a real block can use. [29] The biggest takeaway from our gate-pitch measurements is that Intel 18A compute logic and TSMC N3E GPU logic have similar density in the Bohr representative-cell model. The 18A example is 18.6% denser than the Intel 3 GPU example. Gate pitches are nearly identical across the three sites, so cell height drives most of the difference. The Bohr model combines a four-transistor NAND2 spanning three gate pitches and a 32-transistor scan flip-flop (SFF) spanning nineteen pitches, weighting their densities 60:40. The sensitivity column shows how independently changing cell height and gate pitch by ±1 nm changes the result. This compares representative cell geometries; whole-die density also depends on cell mix and placement. The 18A P-core gives M0 substantially more metal cross section than the N3E vector engine. Treating each profile as a trapezoid gives 2.63 times the area per line and 1.84 times the area after normalization by routing pitch. The larger section reduces the geometric contribution to line resistance and lowers current density for a given current. Taller and wider wires also add capacitance, so circuit delay depends on the balance of resistance and capacitance. The DDR-PHY has less metal area per routing width than the 18A core fields, while remaining above N3E. [30] Area = height × (top CD + bottom CD) / 2, including liners. Area/pitch normalizes by routing width. Taper is the symmetric sidewall angle from vertical, with the largest angle belonging to the DDR-PHY. Compute tile The measurements show how ribbon dimensions and gate-stack geometry vary across the compute tile and between NMOS and PMOS to balance channel drive, gate load and the space needed for the dielectric/WFM stack across logic, SRAM and the DDR-PHY. Width mainly changes available channel perimeter; thickness also changes electrostatic control and carrier confinement. Gate-stack thickness then determines the space left for low-resistivity fill P-core and LP E-core logic Both the P-core and LP E-core use multiple nanosheet widths. Widths are measured on high-magnification XTEMs while wider-field images demonstrate additional width choices within the LP E-core. Multiple widths are expected even within an LP E-core. Timing-critical paths, buffers and cells with different fanout need different drive strengths. The lower-magnification fields show this width diversity beyond the sites quantified in the table. L2 and L3 SRAM GAA gives SRAM designers another way to balance the pull-up (PU), pass-gate (PG), and pull-down (PD) transistors. FinFET bitcells set device strength through fin count while GAA adds nanosheet width as a sizing knob. In a 6T SRAM cell, a strong pull-down relative to the pass-gate limits read disturbance, while a strong pass-gate relative to the pull-up improves writability. During a write, the pass-gate and write driver pull the node storing “1” below the inverter trip point. During a read, the pull-down holds the node storing “0” low. Bias, threshold voltage, mismatch and assist circuitry set the remaining margin. FinFET high-current cells commonly use a PU:PG:PD fin-count pattern of 1:2:2, a device-sizing ratio rather than a current ratio. Ribbon width lets Intel balance SRAM strengths without adding whole fins. The L2 cell uses its narrowest ribbons for PU and widest for PD, improving writability and read stability respectively. Intel’s disclosed HCC operates without assist; its denser HDC uses negative-bitline write assist. Pulling the selected bitline briefly below ground increases pass-gate overdrive so it can overpower the pull-up at lower supply voltage. That buys density and low voltage writability at the cost of boosting circuitry, switching energy, and additional voltage stress that must be controlled. [31], [32] Four rectangular ribbons give the perimeter = 8 × (width + thickness), before corner rounding. PG/PU is 1.49 and PD/PG is 1.16. The L3 structures closely resemble L2 in layout and cell height. Fewer L3 nanosheet widths are tabulated because fewer high-magnification images were available. DDR PHY The DDR-PHY trades density for controlled analog behavior and reliable off-chip signaling. It contains drivers, receivers, delay circuits, and calibration logic that set drive strength, sampling time, and voltage margin. Repeated four-sheet devices with similar widths fit the use of regular transistor units for matching and programmable drive. Its wider local wiring provides room for current delivery and separation of sensitive signals, while consuming more area than a dense core-logic grid. The layout serves the memory channel’s electrical requirements as well as digital logic density. [33] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Intel 3 GPU devices Vector engine logic Intel 3’s XVE logic uses two-fin PMOS and NMOS devices with power rails in M0. Its cell height and M0 pitch give a seven-track geometry, two tracks more than the 18A logic. One-fin groups also appear among the two-fin devices. Intel 3 L2 SRAM The Intel 3 L2 SRAM uses the familiar HCC sizing pattern: one PU fin, two PG fins, and two PD fins. N3E GPU devices Vector engine logic The N3E XVE field contains repeated two-fin devices with seven-track cell geometry. N3E remains a FinFET process, giving Panther Lake a direct FinFET-to-RibbonFET comparison. N3E L2 SRAM The N3E L2 SRAM uses the same PU:PG:PD fin-count pattern of 1:2:2. Panther Lake-U follows Lunar Lake’s floorplan quite closely. Both pair 4 P-cores with 4 LP E-cores and NPU, media and display engines in similar locations. Lunar Lake also uses Xe2, the direct predecessor to Panther Lake’s Xe3 GPU. This makes Lunar Lake the most direct basis for our comparisons. Arrow Lake differs in core count and uses the older Xe-LPG GPU architecture, so we only use it where it offers a more direct component-level comparison. Compute tile Panther Lake compute-tile floorplans remain sparse even months after launch. Intel 18A’s backside metal and dielectric stack must be removed without damaging the underlying structures before a clean transistor-level floorplan can be imaged. Most published die shots hide or heavily process the background, but we are quite proud of the die shot we achieved and are excited to show the work we have done. We measured the areas of the key components on the compute tile and compared them with their Lunar Lake predecessors on TSMC N3B. These help us to capture changes in block area and compare the two chips across process nodes and designs. Our total tile areas exclude the scribe-line area. The compute-plus-GPU subtotal below uses the PTL-U compute tile and GT1 GPU; it excludes the I/O tile and passive base. Individual block areas use the boundaries marked on the floorplans The compute-plus-GPU row is recomputed from the displayed PTL-U and GT1 areas. Component rows use their stated per-region counts and are not an additive partition of the whole tile. The P-core area remains almost unchanged between Lunar Lake and Panther Lake, despite L2 capacity increasing from 2.5 MiB to 3 MiB. Arrow Lake uses the same Lion Cove core as Lunar Lake but also has a 3 MiB L2. Cougar Cove fits 20% more L2 into the same P-core area. The larger private cache keeps more of each core’s working set close to its execution units, reducing access to shared L3 and DRAM. Extra capacity adds storage leakage and lookup energy, so designers balance it against avoided lower-level accesses. The shared P-core L3 cache also shrank by 14.8%. [2] Cougar Cove combines a similar footprint with Intel’s reported power-efficiency improvements. RibbonFET’s tighter channel control reduces leakage, while PowerVia reduces supply droop and allows tighter voltage guardbands. [1] Darkmont’s four-core LP E-core cluster is 5.0% smaller than Skymont’s on Lunar Lake, with most of the reduction in its L2 regions. The 1 MiB region shrank by 8.4% and the 1.5 MiB region by 14.9%. The tag arrays also use one fewer visible row. Tags identify which memory addresses the data array holds, so rearranging them changes the cache’s layout and wiring without requiring less data capacity. [2] The LP E-cores share one L2. This pools capacity and avoids duplicating all the cache machinery, but the four cores contend for its banks and bandwidth. Their separate cluster also keeps light work away from the performance cluster and its L3, allowing that larger domain to sleep. [1], [2] Cache area includes more than the storage cells. Tags identify each line, decoders select rows, sense amplifiers read the small bitline signal, and wires connect to the banks. Splitting an array into smaller sections shortens wordlines and bitlines, improving access speed, but duplicates peripheral circuits. Panther Lake’s smaller cache regions therefore reflect the complete memory implementation, including how much of each region is devoted to storage. [34] Unlike Meteor Lake and Arrow Lake, Panther Lake has no separate SoC tile. The NPU, LP E-cores, memory controllers, PHYs, media and display engines now share the compute tile. This removes an active die and keeps CPU memory traffic on one die. The cost is moving PHY and I/O-related circuitry onto 18A: drivers, receivers and analog circuits must still meet external voltage, loading and signal-integrity requirements, so their area does not shrink like dense digital logic. [1], [2] The biggest shrink comes from the NPU, which occupies 36.9% less area. NPU 5 consolidates the same total INT8 MAC count into half as many neural compute engines. Each of the three NCEs has a larger MAC array to make the complete NCE envelope 22.6% larger than an NPU 4 engine. Consolidation also halves the number of scratchpads and SHAVE DSPs, from 12 to 6. The MAC array handles matrix multiplication and convolution, while SHAVE executes vector and custom operations that fit the array poorly. [1], [2], [35] The paired floorplans identify each NCE envelope and its scratchpad, MAC, and SHAVE regions. Each measured MAC polygon is counted once per NCE in the area accounting below. The scratchpads store weights, activations, and intermediate results near the MAC arrays, allowing repeated use without fetching them again from DRAM. Halving their number delivers the largest measured area saving but leaves less local storage for the same total MAC count. Layers that no longer fit locally require smaller working tiles or more transfers of intermediate data. The benefit depends on keeping the enlarged arrays busy while managing that tighter storage budget. [36] NPU 5 also adds native FP8. Using half the operand width of FP16 reduces storage and transfer demand, helping workloads fit the smaller local memory budget. Lower precision and format-dependent range make scaling and model validation part of deployment. Hardware activation functions further reduce work that would otherwise occupy the programmable DSPs. [1], [2] Microsoft requires an NPU to deliver at least 40 TOPS for Copilot+ PCs. Both Lunar Lake and Panther Lake meet this threshold, but Panther Lake uses significantly less silicon. GPU tiles Panther Lake is Intel’s first product with Xe3, its latest GPU architecture. It offers two different GPU tiles: a smaller GT1 tile with 4 Xe3 cores on Intel 3 and a larger GT2 tile with 12 Xe3 cores on TSMC N3E. Panther Lake allows us to compare the same GPU architecture across both Intel 3 and TSMC N3E. Wildcat Lake adds a third Xe3 implementation on Intel 18A. A future newsletter will detail Xe3 and its implementation differences across all three process nodes. GT2 scales Xe3 to a different physical layout, with render slices arranged vertically instead of GT1’s horizontal arrangement. Slice placement sets the distances to shared cache banks and the D2D interface. Those wires consume area and add delay, so scaling the number of Xe cores also requires a new balance of cache placement, routing and timing. [1] What’s immediately obvious is that the GT2 tile on TSMC N3E has much smaller Xe cores than GT1. These block areas include logic, caches, and routing. An Xe core on the GT1 tile is ~69% larger than one on Lunar Lake, and ~55% larger than one on GT2. Intel 3 therefore uses substantially more area per Xe core. The block-area gap exceeds the measured logic and SRAM density gaps, bringing routing, timing targets, cell mix, and floorplan allocation into the comparison. The measured vector/matrix engine region is almost unchanged between Lunar Lake and Panther Lake’s GT2 tile. Xe3 retains eight 512-bit vector engines and eight 2048-bit XMX engines per core. Its gains also come from feeding those engines more effectively: more resident threads hide stalls, and variable register allocation lets shaders trade registers per thread against the number of threads kept active. [1] The shared L1/SLM capacity increased by 33% from 192 KiB to 256 KiB, while its area increased only 5%, raising effective density by 27%. L1 retains reused cache lines, while software-managed SLM lets a thread group share data locally. Both reduce traffic to more distant memory. Allocating more SLM per group can also limit how many groups reside on a core at once. [1], [37] The GT1 tile carries 4 MiB of L2 against 16 MiB on the GT2 tile. GT1 divides its L2 cache into four 1 MiB banks, while GT2 uses eight 2 MiB banks. Each bank contains 128 macros, but each N3E macro stores 16 KiB, twice the Intel 3 macro’s 8 KiB capacity. The N3E macro is only 54% larger while holding twice as many bits, giving it 30% higher density: ~23.7 Mbit/mm² versus 18.3 Mbit/mm². Including bank-level circuitry, the gap widens to ~16.9 Mbit/mm² on GT2 versus ~10.4 Mbit/mm² on GT1. GT2 gains density with its macros storing more bits per unit area, and those macros occupy more of each cache bank. Larger macros spread decoder and sense-amplifier overhead across more storage, while a more compact bank layout reduces the share spent on control and routing. The compromise is longer wordlines and bitlines that carry more capacitance. [34] I/O tile Panther Lake uses two I/O tile variants, both fabricated on TSMC N6. The smaller one provides 4 PCIe 5.0 and 8 PCIe 4.0 lanes and serves lower-tier systems as well as those without a discrete GPU, while the larger one adds 8 PCIe 5.0 lanes, bringing the total to 20 lanes, for discrete-GPU connectivity. Panther Lake SKUs with the larger 10- or 12-Xe GPUs use the smaller I/O tile. [38] The smaller I/O tile adds a PCIe 4.0 block and a Thunderbolt block to Lunar Lake’s I/O layout, providing four additional PCIe 4.0 lanes and another Thunderbolt 4 port. Its repeated N6 blocks retain nearly identical areas and layouts. Reusing these proven PHYs and controllers avoids porting and requalifying external interfaces on 18A, where faster digital logic offers less benefit to circuits constrained by the off-chip link. [38] SemiAnalysis’s teardown lab (STEEL) dives deep into the world’s advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. We’re hiring technical experts from system to transistor and everywhere in between. Check out our Careers page. Panther Lake offers scalability and modularity through its disaggregated packaging that partition compute, GPU, and I/O silicon into separate tiles allowing for a suite of tile configurations. This partitioning makes the package part of Intel’s node economics as it determines how much leading-edge wafer area each product consumes, which functions can remain on other processes, and how much configuration freedom Intel can offer from a shared set of tiles. Furthermore, fabricating the compute and GPU tiles separately confines the new 18A process to the compute tile and allows graphics and I/O to use other, more established, and more cost-effective processes. For Panther Lake, the GPU and I/O tiles are assembled alongside the compute tile on a passive silicon base using Foveros-S. Intel’s current technology brief lists a nominal 36 µm pitch for Foveros-S. Through-silicon vias (TSVs) in the base connect the fine wiring above to the larger package connections below. The functional tiles sit side by side on that passive base in a 2.5D configuration. [39] Our cross-section through the compute and GPU tiles shows the package’s wiring hierarchy. Microbumps connect each active tile to the passive silicon base; its fine redistribution layer (RDL) carries the short, dense tile-to-tile links. TSVs carry connections through the base to the package substrate, which fans them out to the much coarser motherboard solder joints. The base supplies interconnect, while computation remains in the active tiles above it. [39] At the compute-tile edge, the higher-magnification inset shows a local microbump spacing of approximately 25.24 µm and a feature width of 12.33 µm. These local spacings are finer than Intel’s nominal Foveros-S value. The X-ray fields further confirm tighter neighboring bumps, consistent across every die-to-die area found on each tile. Additional X-ray analysis is offered after the paywall. Putting the memory controller beside the CPU removes the D2D transfer that CPU memory requests required in Meteor Lake and Arrow Lake. This avoids the extra transmitter, receiver, and link traversal, saving interface energy and latency. Panther Lake’s separate GPU still crosses a D2D link to reach DRAM, so its larger local caches also help contain package traffic. [1], [40] Smaller dies are less likely to contain a random fatal defect, and screening them before assembly prevents one bad tile from consuming a complete package of good silicon. Reuse also spreads design and qualification work across more products. Against those gains, Intel pays for the passive base, D2D circuits, extra bonding and test steps, and losses during assembly. Cost per working product across the portfolio captures the combined effect of wafer yield, reuse, test, and assembly. [29] Wildcat Lake packaging Intel launched Core Series 3, formerly Wildcat Lake, on 16 April 2026 for value mobile and edge systems. Wildcat Lake keeps 18A but removes the passive base and combines more functions on one die to simplify the package. The two products therefore reveal two distinct ways to commercialize the same leading-edge process. [41] Wildcat Lake’s 18A die combines up to two Cougar Cove P-cores, four Darkmont LP E-cores, two Xe3 cores and a smaller NPU. A separate platform-controller die supplies I/O, connected through UCIe, Intel’s first processor implementation of the standard. Consolidating graphics remove a tile boundary and the passive base, reducing assembly complexity for a modest-bandwidth value product. It also ties CPU and graphics scaling to the same die, giving up Panther Lake’s ability to swap in a much larger GPU. [42], [43] In July 2021, Intel CEO Pat Gelsinger set out an ambitious process roadmap aimed at regaining performance leadership by 2025, later described as five nodes in four years. Five years and one CEO later, Intel’s comeback story is not as unambiguously positive as Pat may have hoped. [44], [45] Intel once set the pace for process technology, bringing high-k metal gate technology and FinFETs into volume production years ahead of the rest of the industry. Its 22 nm FinFET process reached consumers with Ivy Bridge in 2012. [46] Intel’s integrated device manufacturing (IDM) model allowed its architects and process engineers to co-optimize products and processes. Starting with Sandy Bridge, Intel dominated x86, while AMD struggled with Bulldozer. That lead faltered at 14 nm and broke at 10 nm. Intel targeted a massive 2.7× density increase, but the node arrived years late and required several revisions before it could support Intel’s full lineup. This delay forced Intel to stretch 14 nm across six generations, while TSMC moved ahead in process technology and AMD recovered in x86. By 2019, Intel was still shipping 14 nm across most of its product stack, with its 10 nm client ramp focused on Ice Lake mobile processors. Meanwhile, TSMC was shipping N7 and N7+, and AMD’s Zen 2 compute chiplets used N7 to raise core counts and improve efficiency. Intel’s process failures were central to its decline, but unsound business decisions furthered their downward slide. Product delays compounded product mistakes, pushing client, server, and FPGA roadmaps off schedule. Several attempts to enter AI (Nervana and Gaudi) and networking (Tofino) also failed to establish lasting businesses. Intel’s recovery has focused on consumer CPUs and advanced packaging. Tiger Lake, Alder Lake, Lunar Lake and now Panther Lake have restored Intel’s consumer roadmap. On the process side, Intel 4 shipped with Meteor Lake, Intel 3 with Granite Rapids and Sierra Forest, and Intel 18A with Panther Lake. Intel has also made advanced packaging part of its foundry offering. However, Intel is still playing catch-up in servers. Several Xeon generations arrived years late and trailed contemporary AMD and Arm server CPUs in performance, efficiency, and core count. The process roadmap is back, but Intel does not hold the same process-technology leadership position it held prior to 10 nm. The introduction of gate-all-around nanosheets and backside power delivery are two of the biggest changes to transistor integration in a decade. Intel took on both changes at once: 18A paired its first RibbonFET with PowerVia in Panther Lake. Panther Lake is a substantial manufacturing milestone. Our cross-sections show how RibbonFET and PowerVia reshape local contacts and wiring, while the floorplans show where architectural consolidation and process choices save area. A sustained competitive lead depends on product performance, cost, yield, and the next implementation. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page.. [1] Intel, “Intel Tech Tour 2025 Panther Lake recap,” Doc. 866361, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/866361/ITT_2025_Panther_Lake_Recap1.pdf [2] Intel, “Core Ultra processors Series 3 datasheet, volume 1,” Doc. 872188-001, Jan. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/872188/872188-001.pdf [3] N. Horiguchi and E. Beyne, “Backside power delivery: How to power chips from the backside,” imec Reading Room, Nov. 25, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/how-power-chips-backside [4] W. Hafez et al., “Intel PowerVia technology: Backside power delivery for high density and high-performance computing,” in Proc. IEEE Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2023, pp. 1–2, doi: 10.23919/vlsitechnologyandcir57934.2023.10185208. [5] K. Fischer et al., “Intel 18A platform technology featuring RibbonFET (GAA) and PowerVia for advanced high-performance computing,” in Proc. Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2025, pp. 1–3, doi: 10.23919/vlsitechnologyandcir65189.2025.11075006. [6] K.-F. Cheng, C.-L. Teng, H.-Y. Huang, and H.-C. Chen, “Metal oxide composite as etch stop layer,” U.S. Patent 12 176 247 B2, Dec. 24, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12176247B2/en [7] S. W. King, “Dielectric barrier, etch stop, and metal capping materials for state of the art and beyond metal interconnects,” ECS J. Solid State Sci. Technol., vol. 4, no. 1, pp. N3029–N3047, 2015, doi: 10.1149/2.0051501jss. [8] A. V. Mule’, D. J. Towner, D. Seghete, C. R. Ryder, and A. A. Gonzalez, “Multi-layer etch stop layers for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20220102343 A1, Mar. 31, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20220102343A1/en [9] C.-C. Wang and J. H. Wang, “Interconnect structure with dielectric cap layer and etch stop layer stack,” U.S. Patent Appl. 20230253247 A1, Aug. 10, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20230253247A1/en [10] Y. J. Wu, K.-F. Cheng, C.-C. Lee, H.-K. Chang, and H.-Y. Huang, “Etch stop layer for interconnect structures,” U.S. Patent Appl. 20240332070 A1, Oct. 3, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240332070A1/en [11] M. G. Rainville, N. Shankar, K. S. Reddy, and D. M. Hausmann, “Deposition of aluminum oxide etch stop layers,” U.S. Patent Appl. 20180197770 A1, Jul. 12, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20180197770 [12] J. S. Leib et al., “Conductive lines having molybdenum liner and tungsten fill for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20240429126 A1, Dec. 26, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20240429126 [13] M. Naik, “Cobalt enables power and performance scaling at single-digit logic nodes,” Applied Materials, Dec. 17, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://www.appliedmaterials.com/us/en/blog/blog-posts/cobalt-enables-power-and-performance-scaling-at-single-digit-logic-nodes.html [14] Lam Research, “Breaking through AI’s invisible barrier with molybdenum,” Lam Research Newsroom, May 6, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://newsroom.lamresearch.com/molybdenum-metallization-ai-revolution [15] P. Yashar, G. Malyavanatham, and H. Vijwani, “Integrated circuit interconnect structures with niobium barrier materials,” U.S. Patent Appl. 20240112951 A1, Apr. 4, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240112951A1/en [16] Applied Materials, “Applied Materials unveils chip wiring innovations for more energy-efficient computing,” Applied Materials Investor Relations, Jul. 8, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://ir.appliedmaterials.com/news-releases/news-release-details/applied-materials-unveils-chip-wiring-innovations-more-energy [17] Samsung, “Samsung showcases AI-era vision and latest foundry technologies at SFF 2024,” Samsung Semiconductor, Jun. 13, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://semiconductor.samsung.com/news-events/news/samsung-showcases-ai-era-vision-and-latest-foundry-technologies-at-sff-2024/ [18] C. W. Yeung et al., “Channel geometry impact and narrow sheet effect of stacked nanosheet,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2018, pp. 28.6.1–28.6.4, doi: 10.1109/iedm.2018.8614608. [19] S. Mochizuki et al., “Evaluation of (110) versus (001) channel orientation for improved nFET/pFET device performance trade-off in gate-all-around nanosheet technology,” in Proc. Int. Electron Devices Meeting (IEDM), Dec. 2023, pp. 1–4, doi: 10.1109/iedm45741.2023.10413854. [20] D. G. Ouellette et al., “Fabrication of gate-all-around integrated circuit structures having molybdenum nitride metal gates and gate dielectrics with a dipole layer,” U.S. Patent 12 051 698 B2, Jul. 30, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12051698B2/en [21] imec, “Advancing the CFET-based device roadmap with novel integration modules and standard-cell architectures,” imec, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/advancing-cfet-based-device-roadmap-novel-integration-modules-and-standard-cell [22] A. Reznicek, X. Miao, C. Lee, and J. Zhang, “Wrap around contact for nanosheet source drain epitaxy,” U.S. Patent 11 302 813 B2, Apr. 12, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US11302813B2/en [23] J. A. Kittl, J. G. Hong, D. R. Palle, and M. S. Rodder, “Methods for varied strain on nano-scale field effect transistor devices,” U.S. Patent 9 978 833 B2, May 22, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9978833B2/en [24] S. Gandikota et al., “Method of reducing metal gate resistance for next generation NMOS device application,” Int. Patent Appl. WO 2024/137272 A1, Jun. 27, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/WO2024137272A1/en [25] J. Zhang et al., “Full bottom dielectric isolation to enable stacked nanosheet transistor for low power and high performance applications,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2019, pp. 11.6.1–11.6.4, doi: 10.1109/iedm19573.2019.8993490. [26] C. Yoo, J. Chang, Y. Seon, H. Kim, and J. Jeon, “Analysis of self-heating effects in multi-nanosheet FET considering bottom isolation and package options,” IEEE Trans. Electron Devices, vol. 69, no. 3, pp. 1524–1531, Mar. 2022, doi: 10.1109/ted.2022.3141327. [27] S. S. Pradhan, D. B. Bergstrom, J.-S. Chun, and J. Chiu, “Tungsten gates for non-planar transistors,” European Patent Appl. EP 3 506 367 A1, Jul. 3, 2019. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/EP3506367A1/en [28] L. Schloss and X. Ba, “Tungsten films having low fluorine content,” U.S. Patent 9 754 824 B2, Sep. 5, 2017. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9754824B2/en [29] Intel Foundry, “Accelerating AI and HPC with advanced process and packaging technologies,” Doc. 367370-001US, Jun. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-11/intel-foundry-hpc-ai-brief.pdf [30] M. Lofrano, X. Chang, H. Oprins, and Z. Tokei, “Mitigating the thermal bottleneck in advanced interconnects,” imec, Sep. 28, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/mitigating-thermal-bottleneck-advanced-interconnects [31] S. Bair, “Intel at ISSCC 2025: Navid Shahriari invited talk, eight papers, forums, panelist & product details,” Intel Community, Feb. 19, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://community.intel.com/t5/Blogs/Tech-Innovation/Edge-5G/Intel-at-ISSCC-2025-Navid-Shahriari-Invited-Talk-Eight-Papers/post/1667592 [32] D. Chandra, E. Potladhurthi, D. R. S. Reddy, and K. S. Rengarajan, “Tunable negative bitline write assist and boost attenuation circuit,” U.S. Patent Appl. 20160203857 A1, Jul. 14, 2016. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20160203857A1/en [33] Synopsys, “Advantages of firmware-based training in high-speed DDR IP,” Synopsys IP Technical Bulletin. Accessed: Sep. 14, 2026. [Online]. Available: https://www.synopsys.com/articles/firmware-based-training-ddr-ip.html [34] N. Muralimanohar, R. Balasubramonian, and N. P. Jouppi, “CACTI 6.0: A tool to understand large caches,” Hewlett-Packard Laboratories, 2009. Accessed: Sep. 14, 2026. [Online]. Available: https://users.cs.utah.edu/~rajeev/cacti6/cacti6-tr.pdf [35] Intel, “Intel Tech Tour 2024 Lunar Lake AI hardware accelerators,” Doc. 824436, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/824436/2024_Intel_Tech%20Tour%20TW_Lunar%20Lake%20AI%20Hardware%20Accelerators.pdf [36] Y.-H. Chen, J. Emer, and V. Sze, “Eyeriss: A spatial architecture for energy-efficient dataflow for convolutional neural networks,” in Proc. 43rd ACM/IEEE Annu. Int. Symp. Comput. Archit. (ISCA), Jun. 2016, pp. 367–379, doi: 10.1109/isca.2016.40. [37] Intel, “Introduction to the Xe-HPG architecture,” Doc. 758306, Nov. 4, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/developer/articles/technical/introduction-to-the-xe-hpg-architecture.html [38] Intel, “Core Ultra processors Series 3 for the edge,” Doc. 855291. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/855291/Intel%C2%AE%20Core%E2%84%A2%20Ultra%20Processors%20Series%203%20for%20Edge%20Overview_2.pdf [39] Intel Foundry, “Foveros technology brief,” Doc. 366411-001US, Feb. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-07/foveros-25d-product-brief.pdf [40] D. Das Sharma, “UCIe: Building an open chiplet ecosystem,” UCIe Consortium, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.uciexpress.org/_files/ugd/0c1418_c5970a68ab214ffc97fab16d11581449.pdf [41] Intel, “Intel launches Intel Core Series 3 processors,” Intel Newsroom, Apr. 16, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-launches-intel-core-series-3-processors-changing-the-game-for-everyday-computing.html [42] Intel, “Core Series 3 launch press deck,” Apr. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://download.intel.com/newsroom/2026/Intel-Core-Series-3/Intel-Core-Series-3-Launch-Press-Deck.pdf [43] Intel, “Intel outlines architectures for agentic AI at Hot Chips 2026,” Intel Newsroom, Aug. 24, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-outlines-architectures-for-agentic-ai-at-hot-chips-2026.html [44] Intel, “Intel accelerates process and packaging innovations,” Intel Investor Relations, Jul. 26, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/filings-reports/all-sec-filings/content/0001193125-21-224438/d199788dex991.htm [45] Intel, “Intel reports third-quarter 2021 financial results,” Intel Investor Relations, Oct. 21, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/1505/intel-reports-third-quarter-2021-financial-results [46] Intel, “3rd generation Intel Core processors bring exciting new experiences and fun to the PC,” Intel Investor Relations, Apr. 23, 2012. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/577/3rd-generation-intel-core-processors-bring-exciting
Former Wenatchee health care executive sentenced to 4 years after embezzling $24 million
The CEO of a company in charge of managing health care payment contracts for a pool of clinics in the Pacific Northwest was sentenced to four years in federal prison
Lucas: What if politics actually worked?
There are some 3.2 million registered independent voters in Massachusetts compared to 1.3 million Democrats and 424,000 Republicans.
Business Briefs for Saturday, Sept. 26, 2026
This week's digest of area business announcements, milestones and news.
Cedar Shoals wide receiver gets redemption with game-winning TD
Cedar Shoals football needs to correct mistakes as it dives further into region play. A sophomore showed it's possible on Friday. See what happened.
In Kastellorizo, Science Becomes a Game of Questions
KASTELLORIZO – On Kastellorizo this October, you will not have to walk into a laboratory to find science. You may encounter it on a narrow island street, in a school classroom, at a workshop table, in the middle of a game — or in the sudden question of a child who wants to know why. For three days,
2026 Maker Faire in Vallejo intersects art, science and all things inquisitive
Now in its 20th year, Maker Faire returned Friday to Mare Island’s historic Naval Shipyard, bringing together artists, engineers, scientists, students and curious minds from across the region for a weekend of experimentation and creativity.
Duo provides the Jackson Street soundtrack
Daniel Zeina and Alemayehu Gulelat play music outside Quick Pack Food Mart in Seattle's Central District on Thursday. While the instruments change day to day, here Zeina is playing a
Red Sox eager to ‘take care of business’ in Wild Card rematch with Yankees
Members of the Red Sox are eager to ‘take care of business’ after Wild Card rematch with Yankees made official
Changing the partying landscape: Health and wellness parties to come to fraternity and sorority life across the country
The wellness industry has surpassed a value of $6 trillion dollars this year, according to Forbes. In the saturated wellness market, brands like Marty Moc’s Sweat and Soak is trying to be the next big thing that wellness consumers move toward. Marty Mocs, a 24-year old recent graduate of Liberty University, started his wellness brand...
Vector Science and Therapeutics Corp. Issues Options
Mequon, Wisconsin--(Newsfile Corp. - September 25, 2026) - Vector Science and Therapeutics Corp. (TSXV: PAIN) ("Vector" or the "Company") today announced that the Board of Directors has approved the grant of 150,000 stock options (the "Options") to an Officer of the Company in accordance with the Company's stock option plan. The Options vest in 25% tranches over a three year period, have an exercise price of C$1.80 and are exercisable for a period of five years from the date of grant. This...
School mental health program expands to offer play therapy for elementary students
A school-based clinical therapy program is expanding across the Lowcountry this fall, reaching children as young as 3 years old.
NeuroSense Provides Business Update and Progress for the First Half of 2026
/PRNewswire/ -- Therapeutics Ltd. (NASDAQ: NRSN) ("NeuroSense" or the "Company"), a late-stage clinical biotechnology company focused on developing...
Former Sonics broadcaster Kevin Calabro to join Timberwolves
After decades in the Pacific Northwest, former SuperSonics and Trailblazers broadcaster Kevin Calabro has a new home.
‘Are we back in the Middle Ages?’ State cites mental health ALFs over deaths, care
“The conditions in these homes are intolerable and despicable. But if the state shuts them down, the residents have nowhere to go.”
Ed Sheeran cancels New England concerts as Nor'easter looms
Ed Sheeran can’t be in love with the shape of this forecast. A weekend nor’easter bound for New England has prompted the cancellation of the English pop singer’s concerts Friday
This week in health care policy: September 21–25, 2026
Innovation watch FDA approves the first treatment for Sanfilippo syndrome. On September 17, the FDA approved Ultragenyx’s Fayuvi, a one-time gene therapy for Sanfilippo syndrome type A, an inherited disease that progressively destroys cognitive function in young children. Until this week, there was no approved treatment at all. BioNTech’s lung cancer candidate shows promising results. […]
Adventist Health strikes $18.5M settlement resolving sexual abuse lawsuit
Adventist Health has struck an $18.5 million settlement resolving a lawsuit brought by former patients who alleged sexual abuse from an employed physical therapist. | The settlement translates to more than $2.6 million per plaintiff, “representing one of the nation’s largest per-plaintiff recoveries in a sexual abuse case involving a medical provider,” law firm Lewis & Llewellyn said.
What to know about Taylor Swift’s new music
Taylor Swift has released “The Life of a Showgirl: The Encore.” It's an extended version of her 2025 album with four new tracks. Those include the single “Patient Zero” as
Glen Cove Street Fair brings nearly 100 vendors, entertainment and community together
For one September Saturday, downtown Glen Cove became a gathering place for neighbors, families and visitors as the annual Street Fair filled Glen Street, School Street and Village Square with …
Seattle and Western WA celebrate ‘9 to 5’ Dolly Parton Day
Communities across the world, including Seattle, are celebrating Dolly Day on Sept. 25 — or 9/25 — in a clever nod to her hit song “9 to 5.”
Seattle, Western WA celebrates ‘9 to 5’ Dolly Parton Day
Communities across the world, including Seattle, are celebrating Dolly Day on Sept. 25 — or 9/25 — in a clever nod to her hit song “9 to 5.”
‘War’ review: HBO legal drama is a delicious dive into the muck
The eight-episode series, premiering Oct. 1 on HBO Max, focuses on the tense legal battle behind an extremely high-profile and nasty divorce.
Space Needle, more Seattle landmarks anchor community fitness events
Base 2 Space, the Light Rail Relay and the Dick's-A-Thon are uniquely Seattle fitness challenges — with racers participating for a number of good causes.
Pioneer of China NewCo model sued in US over trade secret misuse, double-dealing
A legal feud unfolding in New York is putting a spotlight on the work of a business development veteran who is credited for pioneering one of biopharma’s hottest dealmaking mechanism: the China “NewCo” model. In a lawsuit originally filed in New York state court and recently moved to federal court, China’s Lepu Medical Technology has alleged that biopharma business development consultant Su Zhang, who was hired to help shop its GLP-1 weight-loss candidates to Western partners, engaged in corporate double-dealing and trade secret leaks. According to the complaint, while acting as Lepu’s primary dealmaking liaison for a group of obesity and metabolic disease drug candidates, Zhang was secretly double-dipping as the acting chief business officer for a direct competitor, BrightGene Pharmaceutical. “She never adequately disclosed the role, never sought Lepu’s consent, and never proposed any safeguard,” Lepu alleged in its complaint, which was filed in July after Zhang’s consulting firm, CoDevCo, sought certain transaction-based success fees from its angry customer through an arbitration process in Singapore. Lepu, the parent company of Lepu Biopharma, has asked Zhang to pay back its $500,000 retainer and disgorge all benefits she received during the alleged breaches of fiduciary duty, plus other damages and relief. The company has also requested the court grant injunctions to protect Lepu’s trade secrets. The ill-fated partnership officially kicked off in December 2024, when Lepu tapped CoDevCo as its “exclusive business development mechanism” to identify collaborators for the company’s drug candidates. According to Lepu’s complaint, Zhang personally negotiated and signed the agreement as managing director for CoDevCo, which used her home address. Before the Lepu deal, Zhang made a name following a short stint as the global head of business development for Hengrui Pharmaceuticals. It was during her tenure that Hengrui signed a landmark deal granting exclusive rights for a portfolio of GLP-1 assets to Hercules, which was at that time newly established by a group of private equity and venture capital firms. In addition to the regular upfront and milestone payments, Hengrui also gained an equity stake in Hercules, which later became Kailera Therapeutics. The Hengrui-Hercules deal opened a new paradigm, where a Chinese biopharma company spins off certain early-stage assets to investors for further development through the creation of a new company abroad. The “NewCo” model quickly came into vogue as it allows Western investors to access high-potential assets originating from China at an early stage while giving the Chinese licensors an opportunity to reap long-term benefits through equity stakes in the new firms. The NewCo model proved its value when Kailera staged a record-breaking $625 million IPO on Nasdaq this April, merely two years into the Hengrui deal. Related Kailera CEO 'knew we were in a good spot' before obesity biotech's record-breaking $625M IPO On her LinkedIn page, Zhang described her work at Hengrui as “[b]uilding team and capability from the ground up,” forming NewCo and major pharma partnerships worth billions of dollars. Lepu clearly wanted that kind of track record to help boost its own cardiometabolic portfolio, which includes a range of assets for obesity, Type 2 diabetes, fatty liver disease and muscle preservation during weight loss treatment. “Lepu’s pipeline is very valuable, but only if Lepu could secure the right international partner to expand into the overseas market during the available commercial window,” the company argued in its complaint. The Chinese biotech said it had little knowledge of U.S. laws, customs or business practices in the business development field, and therefore “needed to rely entirely” on the expertise of Zhang and her team as the firm’s first engagement of a U.S.-based BD consultant. “Zhang’s dominating influence on the business development strategy is further evidenced by the fact that she personally controlled the business-development communications on behalf of Lepu with potential partners,” Lepu said in its complaint. After entering the deal, Zhang introduced Lepu to her four associates. According to Lepu’s version of events, all of them were allegedly employed at different time points to perform similar jobs at other Chinese companies that Lepu described as its competitors, while having access to Lepu’s confidential information. As such, Lepu described Zhang’s team as “a roster of individuals whose primary professional loyalty, by virtue of their concurrent full-time employment, ran to Lepu’s competitors.” As well as the specific examples set out in the case, a look at Lepu’s deals over the period suggests Zhang may have been involved in at least one transaction. During their partnership, Lepu, through its subsidiary Shanghai Minwei Biotechnology, also out-licensed its GLP-1/GIP/FGF21 agonist MWN105 to a NewCo called Sidera Bio in the fall of 2025. The deal included an upfront and near-term payment of $35 million, up to $1.01 billion in milestones, and a 9.99% stake in the Danish startup. It seems likely that Zhang facilitated the Minwei deal given that Lepu is on record as having used CoDevCo as its “exclusive business development mechanism.” The big shock for Lepu came in the form of a news article on June 25, 2025. The article, reporting on phase 2 data for BrightGene’s GLP-1/GIP receptor agonist BGM0504, identified Zhang as acting chief business officer of the Lepu rival. Blindsided by her association with BrightGene, Lepu confronted Zhang in July 2025. “Lepu was given assurances that there was nothing to be concerned about and told that Zhang would explain the matter to Lepu,” Lepu alleged in its complaint. “Zhang never did.” Lepu claimed that Zhang had the motive and opportunity to steer potential prospective partners toward BrightGene or other competitors. Later, in February 2026, one of Zhang’s associates joined BrightGene as the vice president for global business development, according to the complaint. Around the same time, Lepu sent written demand letters asking Zhang to account for her BrightGene role, identify what confidential data were shared with the rival firm, and provide any conflict-of-interest or firewall policies during the engagement. According to Lepu, neither CoDevCo nor Zhang answered the questions in their responses. Related Novo vs. KBP: How a $1.3B deal turned into a fraud accusation and an international legal fight In a motion to dismiss filed with the U.S. District Court in the Eastern District of New York on Sept. 4, Zhang’s legal team argued that Lepu’s agreement was signed with CoDevCo, and that an employee of the contractor does not owe fiduciary duties to the client. In its complaint, Lepu said: “That CoDevCo was the contracting entity does not insulate Zhang from personal liability for duties she personally undertook and personally breached.” Taking the argument one step further, the defending party argued that the consulting agreement “does not create a fiduciary relationship even between CoDevCo and Lepu; instead, it identifies CoDevCo as an independent contractor retained to market Lepu’s business to potential western partners.” Although CoDevCo was Lepu’s exclusive business-development contractor, there were no terms stipulating that the consulting firm should serve only Lepu, Zhang’s lawyer noted. As to Lepu’s claims that Zhang misappropriated trade secrets, the defendant argued that Lepu authorized the use of the information so Zhang’s team could perform their service per the agreement. In a rebuttal filed on Sept. 11, Lepu’s lawyer set out why they believe the Chinese biotech satisfied New York law’s misappropriation definition by alleging that the defendant used a trade secret “in breach of a duty or through improper means.” As an alternative to dismissing the suit, the defendant suggested the action should be stayed pending outcomes from the arbitration of a separate case in Singapore. While NewCo pioneer Zhang is defending her business arrangements, momentum behind the NewCo trend has continued unabated into 2026. Through August, Chinese biotech assets have spurred 15 NewCo deals this year, according to local trade publication PharmaDJ.