SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " Section " 851 found 🔀 AI-powered Shuffle
Road-funding initiative clears signature threshold, qualifies for November ballot
A measure that would dedicate all transportation-related revenue to Colorado’s roads and bridges has officially qualified for the November ballot after Initiative No. 175 cleared the state’s signature threshold, according to the Secretary of State’s Office. Backed by the coalition Restore Our Roads, Initiative 175 would require that all transportation-related revenue be used exclusively for […]
Roku May Help Fox Avoid Aggregeddon
(Welcome to the “Most Important Story of the Week”, my bi-weekly strategy column analyzing the most important (but often not buzziest) news story of the last two weeks. I’m the Entertainment Strategy Guy, a former streaming executive who now analyzes business strategy in the entertainment industry. Please subscribe.) Scrolling through links over the last week, I stumbled across this fun headline: Wow. Formula 1 (the sport, not the docu-series) is the perfect “dog not barking”. As a reminder, each week in my Streaming Ratings Report, I call out the shows that miss every viewership chart. I dub them “dogs not barking”—like the Sherlock Holmes mystery—because without any data, we forget they even exist. This is in contrast to something like, say, a film flop—cough The Mandalorian and Grogu cough—where even underperforming at the box office is widely discussed here, there and everywhere. In the US, Formula 1 is now in “no public viewership data, so not discussed” territory. After moving to Apple TV from its former home of ESPN, basically no one talks about it. Apple did publish an initial, unsourced, unsubstantiated, (dare I say unserious) datecdote claiming more folks are watching Formula 1 on Apple than ESPN, but we haven’t gotten any updates since. This stands in contrast to when the sport streamed on ESPN, and ESPN PR provided weekly viewership figures. Formula 1 was, at best, a niche sport in America—averaging 1.3 million viewers in the Big Data Plus era—but now it’s basically anonymous. (And yeah, after moving to Apple, I very, very, very much doubt its ratings increased.) Unfortunately, that story isn’t quite big enough to warrant a section in today’s “Most Important Story of the Week” column, but I wanted to call it out, because otherwise, no one else will! Certainly, no one will write articles about the silence/ratings decline, unlike when they wrote breathless articles connecting the rise in viewership to Netflix’s Drive to Survive, including Reuters just last month. (This is a topic I’ve tried to provide a moderate/nuanced/non-hyped take since 2022.) Anyway, on to this week’s issue. I was a bit worried I didn’t have a juicy topic, then the Murdochs went out and did their Murdoch thing: buying Roku. So that’s the story of the week, and it happens to touch on quite a few themes of the streaming wars and the disruption therein. I’ll cover that, plus why more consolidation in Hollywood media looks likely, more good news on the Hollywood labor front, whether we’ll see an uptick in production in Los Angeles, some Broadway and theme park news, cellphone prices going up in the third world (and possibly everywhere), and more. Subscribe Most Important Story of the Week - Another Big Media & Entertainment Merger The story of the week is clearly Fox is buying Roku for $22 billion. I read a lot of good strategy takes on why Fox bought this streaming TV device maker—and I’ll have mine below—but what fascinates me more is how this deal connects to quite a few themes of the streaming wars, linking to everything from the pace of M&A to “aggregeddon” to Netflix’s recent M&A actions/inactions to the shift to advertising from pure play streaming and more. The only topic I can’t really connect it to is my old theory, “never bet against Rupert Murdoch” because he isn’t the one who did this deal; his son Lachlan inked it. (Do I think he provided advice, even at his 95 years of age? Sure.) That plus I have one additional piece of strategy for all entertainment players, inspired by this deal. So let’s dive into all those topics, starting with why I like this deal. Roku is a Great M&A Buy
Ending birthright citizenship could be a public health disaster
If the Supreme Court upholds the executive order ending birthright citizenship, it could “have stark consequences at the intersection of bioethics and public health.”
WATCH: Dems unite on anti-terror spying authority amid standoff over Trump's DNI pick
Democratic senators agree Congress should renew FISA Section 702 spying powers but raise concerns about Bill Pulte as acting intelligence director.
Apple Seeds iOS 27 and iPadOS 27 Second Betas to Developers
Apple today seeded the second betas of iOS 27 and iPadOS 27 to developers for testing purposes, with the update coming a week after Apple released the first betas following the WWDC 2026 keynote. Registered developers can download the betas from the Settings app on the iPhone or iPad by going to the General section and selecting Software Update. iOS 27 introduces Apple's smarter version of Siri, Siri AI.
Man falls to death during Goose concert at Madison Square Garden
A 51-year-old man is dead after falling from an upper tier of Madison Square Garden into a lower section during Saturday's Goose concert.
Letters to Sports: Dodgers continue to cover their bases
Readers of the Los Angeles Times Sports section give their thoughts on the Dodgers, World Cup soccer, Victor Wembanyama and Lawrence Tanter.
Letters to Sports: Dodgers continue to cover their bases
Readers of the Los Angeles Times Sports section give their thoughts on the Dodgers, World Cup soccer, Victor Wembanyama and Lawrence Tanter.
Paraguayan volunteers gain firsthand health care experience supporting AMISTAD audiologists
During AMISTAD 2026, two Paraguayan volunteers stood at the intersection of education and international partnership, working alongside U.S. Air Force audiologists to deliver specialty hearing care at Unidad de Salud Familiar Niño de Jesús.
A Career Powered by Curiosity: Jasna Jankovic’s Path from Industry to Academia
From industry scientist to award-winning educator and researcher, Jasna Jankovic has built a career at the intersection of materials science, clean energy, ...
Science, Public Health, and the Politics of Truth
Presented as part of the McCloskey Speaker Series.Peter Hotez, M.D., Ph.D., professor and dean of the National School of Tropical Medicine at Baylor College of Medicine, joins the Aspen Institute for a keynote lecture on the intersection of science, medicine, and public trust. A leading authority on vaccines and neglected tropical diseases, Hotez reflects on the challenges facing public health today, the growing politicization of science, and what it will take to rebuild trust in scientific institutions in the years ahead.Paepcke Auditorium, doors at 5:00 pmRegistrationThis event is free and open to the public, but registration is required, and capacity is established on a first-come, first-served basis. Once an event is at capacity, we will have an in-person waitlist at the door.Public registration is now open for summer 2026. Please click here to register.ParkingParking is very limited. Please carpool, walk, bike, or ride RFTA.Book signing will immediately follow the event. To learn more about his book or to order a copy, please click here.
Science, Public Health, and the Politics of Truth
Presented as part of the McCloskey Speaker Series.Peter Hotez, M.D., Ph.D., professor and dean of the National School of Tropical Medicine at Baylor College of Medicine, joins the Aspen Institute for a keynote lecture on the intersection of science, medicine, and public trust. A leading authority on vaccines and neglected tropical diseases, Hotez reflects on the challenges facing public health today, the growing politicization of science, and what it will take to rebuild trust in scientific institutions in the years ahead.Paepcke Auditorium, doors at 5:00 pmRegistrationThis event is free and open to the public, but registration is required, and capacity is established on a first-come, first-served basis. Once an event is at capacity, we will have an in-person waitlist at the door.Public registration is now open for summer 2026. Please click here to register.ParkingParking is very limited. Please carpool, walk, bike, or ride RFTA.Book signing will immediately follow the event. To learn more about his book or to order a copy, please click here.
"It's really going to impact us': Troy lane closures worry businesses during peak summer season
Lanes of a major Troy intersection are closing for three weeks — right in the middle of summer. Local businesses say the timing couldn't be worse.
War, sports collide as Iran's World Cup kicks off in Los Angeles
CBC News reported on the unchartered territory FIFA World Cup 2026 is finding itself in as members of Team Iran arrive in Los Angeles, inviting a divisive collision of geopolitics and sports in an area with a large Iranian diaspora. "You've never had two countries engaged in active military conflict matching up against each other, competing in the same tournament," said Salma Mousa, an assistant professor of political science and affiliated faculty with the Bedari Kindness Institute. Mousa, who studies the intersection of sports and conflicts, worries that a potential July 3 face-off between Iran and the U.S. in Texas might “increase tensions to kind of a cataclysmic degree.” Read more about UCLA in today’s Washington Times.
Merchants of Doubt and the attacks on Extreme Event Attribution science
Last week, I attended a meeting at Columbia University on attribution science and climate law, hosted by the Sabin Center. It was a fantastic event, bringing together scientists and legal experts working at the intersection of extreme event attribution and climate law. Subscribe For those unfamiliar with it, extreme event attribution attempts to quantify the contribution of climate change to an extreme event. For example, several groups analyzed the impact of climate change on Hurricane Harvey’s enormous rainfall totals over Houston, Texas and they found that climate change increased rainfall by 15 to 38%. One thing that came up again and again was how terrified fossil-fuel interests are of extreme event attribution science. They are acutely aware that this research could land them in court. And losing those cases would leave them legally liable for billions of dollars in climate damages. Because the legal stakes are so high, the blowback has turned ugly. I spoke with several scientists at the meeting who are facing ongoing harassment over their work. This blowback is a coordinated campaign to make the entire field look suspect. The goal is to create the impression that attribution science is too uncertain, too political, or too conflicted to be useful in court or in public policy. The strategy is not based on actual science or evidence of misconduct, but on the generation of doubt. The new Merchants of Doubt We’ve seen this before. In fact, not that long ago: We only have to go back a year to the Department of Energy (DOE) Climate Working Group (CWG) report to see an example of using doubt as the tool to push back against well-established science. This strategy is laid out in an email from a member of the CWG, Dr. Roy Spencer, that was released during litigation over the Climate Working Group process. The key quote is: About all I can hope is that what we write will provide sufficient “reasonable scientific doubt” regarding the science claims in the 2009 TSD [technical support document], based upon almost 2 decades of new science, to call into question the original reasoning for the EPA Administrator’s decision that CO2 presents a threat to human health and welfare. This statement is strong evidence that at least some members of the committee were working to support a particular policy outcome: revoking the Endangerment Finding. The email also explains how they planned to do it: by attempting to generate “reasonable doubt”. This is going to be hard, Spencer implies. Despite falsely claiming that “2 decades of new science” weakens the case, Spencer explicitly acknowledges that the actual peer-reviewed science of climate change overwhelmingly rejects his position: But if the science argument is decided upon by a vote, or by the number of published citations, we lose the science argument. We can go back even further: This CWG email shares unmistakable DNA with the infamous 1969 tobacco memo that declared: “Doubt is our product, since it is the best means of competing with the ‘body of fact’ that exists in the mind of the general public. It is also the means of establishing a controversy.” The tobacco memo also acknowledges the limit of this strategy: Like the CWG, they knew the science was not on their side. Share The new new Merchants of Doubt The people attacking the IPCC chapter on extreme event attribution are the newest iteration of the Merchants of Doubt. Their goal, like all Merchants before them, is to introduce doubt into the process. Because the report is not even out yet, they cannot attack its conclusions. So they are attacking the authors instead. Here is a press release from the House Science, Space, and Technology Committee: In the letter, the Chairmen express concerns about potential conflicts of interest involving members of the Attribution Committee, stating that “publicly available information suggests a troubling pattern” in which committee members are affiliated with nonprofits that support climate accountability lawsuits, “raising the appearance of impropriety and member bias.” To be clear, this is just innuendo. There is no actual evidence of bias. And given the robust process that these reports go through, including multiple lines of peer review, it seems very unlikely that significant bias can survive into the report. When the report comes out, critics will have the opportunity to make legitimate criticisms of the report — if any exist. If none do, however, they’ll still make criticisms, but they’ll be bogus, simply designed to generate doubt. We’ll see. A note to the press: Fix your frame To any journalists reading this: The public debate over extreme event attribution science is not going away. The science is simply too dangerous to fossil-fuel interests for them to stop fighting it. You very well might be assigned to write an article about this area of research in the future. When you do, do not automatically adopt the framing that climate misinformers want you to use. They want you to frame the story around questions like: Are climate scientists trying to put their thumb on the scale to achieve a predetermined, politically motivated result? Are climate scientists improperly letting their politics invade the science of the IPCC? That frame is a trap. Instead, you need to view this through the historical lens of the Merchants of Doubt. How does the ecosystem of doubt operate? Who funds it? What methods do they use to misrepresent science and slime researchers? What scientific results are they trying to keep people from understanding are legitimate? Ultimately, you instead need to focus your article on the generation of doubt as a way to maintain the fossil fuel industry’s social and legal license to keep burning oil, gas, and coal. If you treat the misinformers’ frame as a legitimate, good-faith scientific critique, you are helping them produce doubt. Don’t do it. Don’t be a Merchant of Doubt. Thanks for reading The Climate Brink! Subscribe for free to receive new posts and support our work. Subscribe other stuff The Staying Curious Substack has an interesting post about the different flavors of climate sensitivity. This is crucial information if you want to understand how scientists think about how much warming the Earth will experience. I’d be grateful if you could hit the like button ❤️ below! It helps more people discover these ideas and lets me know what’s connecting with readers.
OPCW and UNODA partner to bridge gap between scientists and policymakers
Scientists learn how to apply policy and diplomacy at OPCW-UNODA workshop on chemical and biological disarmament
Today’s Maryland Science Center is much different from the attraction that opened 50 years ago
The Maryland Science Center first opened 50 years ago at the intersection of Light Street and Key Highway.
Oral Health and Menopause Lunch and Learn Highlights Need for Interdisciplinary Care
Program explored the intersection of menopause, oral health, and health equity during National Oral Health Month
Juneteenth event to highlight mental health resources, history in Upper Burrell
Mental health struggles for Black Americans often go overlooked, according to the Rev. Vincent Ponder of Community Baptist Church in the Lincoln Beach section of Upper Burrell. It’s why he wants to bring more resources, awareness and education to his community. Community Revitalization Mission of Service, a Lincoln Beach-based nonprofit,
Political scientist Daniel Smith recognized for scholarly contributions
Dan Smith, UF faculty member since 2003, has received the 2026 Career Achievement Award from the State Politics and Policy Section o the American Political Science Association.
Electronic Arts Introduces EA Advertising, Launching Brands Directly Into Gameplay and Live Experiences
Connecting brands to highly engaged audiences through an exclusive EA SPORTS Partner Program, in-game integrations, creative partnerships, and scalable advertising capabilities across EA’s global portfolio Electronic Arts Inc. (NASDAQ: EA), the global leader in interactive entertainment, today announced the launch of EA Advertising , a new platform transforming how brands connect with audiences through digital and real-world experiences across its global portfolio of games. EA sits at the intersection of entertainment, sports, technology, music, and culture. Across console, mobile, and PC, our games and services reached more than 120 million players 1 each month during fiscal year 2026. Together, this scale and frequency of engagement create meaningful opportunities for brands to connect with audiences through authentic, interactive experiences. EA SPORTS is one of the largest interactive sports platforms in the world, connecting hundreds of millions of players across console, PC, and
Vote for Section V's Boys Athlete of the Week for June 8-14 presented by Faber Builders
Your vote will determine who will be the Faber Builders Boys Sports Athlete of the Week for June 8-14.
Is SMIC N+3’s Metal Pitch Smaller than Intel 18A’s?
Almost four years ago, we published that SMIC had started shipping 7 nm (N+1) chips. Now, SMIC is shipping its third-generation 7 nm (N+3) process in Huawei’s Kirin 9030, with a minimum metal pitch of 32.5 nm, about 10% tighter than the 36 nm minimum metal pitch shipping in Intel’s latest Panther Lake CPUs on 18A. The headline is true, but incomplete cherry picked metric. N+3 reaches the density of TSMC N6 through aggressive DUV multi-patterning and design-technology co-optimization (DTCO), but it pays for that in complexity, efficiency and process control. We found this and more in our reverse engineering and teardown where we cover SMIC’s N3 process technology, Huawei’s packaging, memory, architecture, and more. SemiAnalysis has been building a state-of-the-art teardown lab in Oregon capable of analyzing the world’s most advanced and important chips over the last year and half. We have already generated revenue on advanced datacenter chip teardowns including our recent reverse engineering of a major TSMC customer’s COUPE CPO optical engine + EIC 3D stack. This is the first public report from the SemiAnalysis Teardown Engineering & Evaluation Lab, or STEEL for short. The lab is aggressively scaling up and out and we’re excited to announce it publicly. This is a bit of inconvenient timing for TechInsights as they are private equity owned and currently being sold while having enjoyed virtually no credible competition for decades. This has led to TechInsights underinvesting in CAPEX. SemiAnalysis exceeds TechInsights in revenue despite no venture or private equity ownership and being founded only 6 years ago. Because we have no external investors and are founder led, we move faster, build faster, and we can release client chip teardowns for free regularly, while focusing on datacenter for our major clients. Here’s the first public image from our lab, the HiSilicon Kirin 9030 Pro SoC: This report will detail our teardown of the Kirin 9030 and our findings on SMIC’s N+3 process, the most advanced in China. For comparison, we’ll show our teardown of the MediaTek Helio G99, made on TSMC N6. Through this comparison, we can look at the effect of export controls – SMIC N+3 and TSMC N6 are comparable nodes, but one is heavily export-controlled, the other free to use the West’s most advanced equipment. Here we see both China’s progress and constraints. SMIC N+3 reaches TSMC N6-class logic density, but it requires far more aggressive DUV multi-patterning, so it does not match N6 on process maturity or cost. The Kirin 9030 Pro performs similarly to three-year-old Android flagships, and trails far behind the current flagship SoCs from Apple, Qualcomm, MediaTek, and Samsung. The efficiency gap is even wider. Export controls have not stopped Huawei and SMIC from shipping advanced silicon, but they have forced a different path. Without EUV, SMIC is leaning harder on DUV multi-patterning, DTCO, and increasingly complex integration. The roadmap continues forward through tighter design rules and backside power, but each step adds cost and process risk. Huawei’s τ scaling and LogicFolding show another path: stacking active logic and recovering density through advanced packaging and system-technology co-optimization (STCO). To understand the Kirin 9030, we must first understand Huawei’s SoC history. HiSilicon is Huawei’s chip design arm, responsible for the Kirin smartphone SoCs, Kunpeng server CPUs, Ascend AI accelerators, and switch/router networking silicon. Before export controls, Huawei was TSMC’s largest customer – the only customer on TSMC’s first EUV node, N7+, and among the first on N5, alongside Apple. That ended in late 2020. Huawei switched to Qualcomm SoCs in its flagship smartphones, though export controls limited them to 4G-only variants. In late 2023, Huawei returned to in-house silicon with the Kirin 9000s, a successor to the Kirin 9000, fabricated on SMIC N+2 instead of TSMC N5. In the following years, they released the Kirin 9010 and 9020 on the same N+2 process. These chips used Huawei’s in-house TaiShan CPU cores and Maleoon GPU. We have not torn down a Kirin 9020 ourselves, so the predecessor die shot is from Kurnal. The die shots show how Huawei spent its silicon budget: which functional blocks are where, and how their areas compare to the predecessor. First, a quick guide to the major blocks on the die. The total die area is nearly identical, but the 9030 uses that area more aggressively. A denser process lets Huawei fit an extra middle CPU core, more GPU and NPU cores, and larger caches into the same footprint. In contrast, the Helio G99 is a much smaller, low-cost SoC, built for budget smartphones rather than a flagship device. While the Kirin 9030 is ~140 mm², the G99 is only ~29 mm², roughly one-fifth the area. The underlying TSMC process technology, however, is directly comparable as a baseline for analyzing SMIC’s. The Kirin 9030 is an evolutionary refresh, not a clean-sheet design. Its CPU, GPU and NPU cores carry over the 9020’s families, and the gains come from three levers: the SMIC N+2-to-N+3 process step, DTCO and floorplan work, and incremental microarchitecture. Area is where the first two show up, and the 9030 scales well here. Performance and efficiency are the harder test. Huawei’s design holds up better than its node would suggest, but the chip still trails, both because N+3 sits behind the leading-edge nodes and because its cores, while competent, remain a few generations behind the newest designs. The new prime core is an incremental update. The main changes are a 10% frequency increase from 2.5 GHz to 2.75 GHz and a doubling in the L2 cache from 1 MiB to 2 MiB. Despite the increased cache, the core size decreased by 7.6%. Excluding the private L2 cache, the core size decreased by 21%. This is a large reduction for an incremental node. Compared with the TaiShan New V120 core in the Kirin 9020, the Kirin 9030’s middle core is almost unchanged architecturally, yet each core shrinks by ~22%. Most of that comes from the move from N+2 to N+3, with layout likely accounting for the rest. Visually, the most noticeable change is the increase from 3 middle cores to 4. There is also a 20% increase in the shared L3 cache of the big cluster. This helps to improve multi-core performance without sacrificing much in terms of area. Even with each core shrinking, the big CPU cluster’s total area is essentially unchanged. The per-core savings went back into an additional middle core and larger caches. The tiny cores shrank less than the prime core (excluding its L2 cache) and less than the middle cores. This is likely because fixed overhead is a larger share on a small core. We cannot resolve any architectural changes from the die shot alone, but the per-clock and efficiency gains shown below point to more than pure process and layout scaling. The area reduction was offset by a doubling of the shared L2 cache from 2 MiB to 4 MiB, leaving the total tiny CPU cluster area slightly larger. Area is the easiest improvement to see from a die shot, but it is only one part of PPA (power, performance, area). For modern logic, power and performance matter just as much, and often more. Since Dennard scaling broke down in the mid-2000s, voltage and frequency have not scaled in step with transistor dimensions, so each node has had to fight harder for gains in performance and efficiency. The starkest comparison is not Kirin 9020 versus Kirin 9030 Pro. Apple’s efficiency cores run circles around Huawei’s prime core. Apple’s low-power core delivers 20% higher integer performance while drawing only 1 W, compared with 4.5 W for Huawei’s prime core. N+3 matches TSMC N6, but N6 is several generations old. Apple and Qualcomm build on N4 and N3P, which are denser and sit on a better voltage-frequency curve, giving them a larger transistor budget and more performance per watt. The 9030’s own cores did improve. The middle and tiny cores gained 17% and 14% in per-clock integer performance over the 9020, with floating-point flat on the middle core and up 11% on the tiny. The tiny core improves cleanly, with performance rising while power falls and efficiency increases by 45% in integer and 24% in floating point. The middle core is mixed: integer performance rises but power rises faster, cutting integer efficiency by 7%, while lower power lifts floating-point efficiency 16%. Per-clock gains at the same or lower frequency are microarchitectural, so the cores are tuned, not just shrunk. Both also failed to hold their rated maximum frequencies, pointing to thermal, power, or stability limits. Per clock, the middle core sits around Arm Cortex-A720 and the tiny core near the Cortex-A520; absolute performance trails because Huawei clocks them much lower. The prime core is roughly Cortex-X2 class per clock, a 2021 design. Apple’s 2020 M1 Firestorm core is still 35% higher per clock and 57% faster in absolute integer performance at a similar 4.5 W. The current leading edge is further ahead again: the Apple M5 P-core is 60% higher per clock and 2.7× faster, the Arm C1 Ultra 45% higher and 2× faster. Matching older high-end cores per clock is a genuine design achievement. What Huawei cannot match is the voltage-frequency curve and transistor budget of leading-edge nodes, which let Apple, Qualcomm and others spend more transistors in the same area on wider cores, larger caches and deeper buffers while running at lower voltage. Huawei’s LogicFolding roadmap is one answer, stacking active logic to recover density and shorten signal paths. We return to it later. The GPU compute units (CUs) changed more visibly than the CPU cores, moving to a more rectangular layout for both the arithmetic logic unit (ALU) clusters and the CU overall. Even with ray-tracing support added, a CU shrank ~28%. However, that shrink is offset by the increase from 4 to 6 CUs and the area outside the CUs grew 33%. Overall, the GPU cluster is larger by ~10%. The GPU is where Huawei makes its biggest gains. The Maleoon 935 is not competitive with current flagships, but it is a large step up from the 920 and reaches older-flagship territory. In 3DMark it is 70% faster in Wild Life Extreme (WLE) and 79% faster in Steel Nomad Light (SNL) than the 920; with 11% higher clocks and 50% more CUs, the ~67% theoretical uplift roughly matches WLE and is beaten by SNL. It edges ahead of the Snapdragon 8+ Gen 1 in WLE and SNL, and the Dimensity 9200 and Apple A16 in WLE, but stays far behind newer parts: the Snapdragon 8 Elite Gen 5 and Dimensity 9500 are ~2.4–2.6× faster in WLE and ~3.2× faster in SNL. The Maleoon 935 is Huawei’s first GPU with hardware-accelerated ray tracing; there it lands slightly ahead of the Exynos 2200, and on par with the Apple A16, with current flagships up to 3.7× faster. The Neural Processing Unit (NPU) saw the largest structural changes of any block, moving from a Lite and a Tiny core in the Kirin 9020 to a Lite and two Tiny cores in the Kirin 9030. Both core types also show significant layout changes. This is a reversal in Huawei’s NPU design. The Kirin 9000 5G, its last flagship chip on TSMC N5, used two Lite and one Tiny core. The series of SoCs on SMIC N+2 moved to one Lite and one Tiny core, likely for area savings. With the Kirin 9030, Huawei has shifted back toward a larger multi-core NPU cluster, but with the additional area going to a Tiny core rather than a Lite core. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Before diving into the process stack, the package and memory are worth separating from the SoC itself. The Pro variant of the Kirin 9030 carries 12 GB of Samsung DRAM, with two stacks of four dies each. The dies were identified as the K4L2E165YD, a 12 Gb LPDDR5X-9600 device fabricated on Samsung’s 1a node, the fourth generation of its 10 nm-class DRAM after 1x, 1y and 1z. 1a has shipped in volume since 2022, so this is current memory rather than older-node inventory. The 16 GB Pro Max variants we obtained were found with both CXMT and Samsung packages. The CXMT package is marked CXDD7JEDM, with two stacks of four dies, packaged in week 45 of 2025. The inferred die dimensions from X-ray computed tomography (CT) are consistent with a known density of ~0.3 Gib/mm² for the CXMT G4 process, roughly equivalent to other manufacturers’ 1z processes. The Kirin 9030 uses a typical integrated package-on-package (iPoP) stack: multiple DRAM dies in a memory package sit above an organic redistribution layer (RDL) interposer, which sits above the SoC and package substrate. The full package is then mounted to the printed circuit board (PCB) through ball-grid array (BGA) solder bumps. The memory package substrate is a thin bismaleimide-triazine (BT) laminate carrying the LPDDR5X stack. The organic RDL interposer over the SoC routes the PoP signals around the die and carries possible dummy thermal copper pillars. The package substrate, a thicker Ajinomoto Build-up Film (ABF) build-up over a BT core, fans the flip-chip bumps out to BGA pitch and embeds the power planes. The whole stack is organic. The only silicon is the SoC and the LPDDR5X dies; there is no silicon interposer. Keeping it all-organic brings the package’s coefficient of thermal expansion (CTE) close to the PCB’s, reducing board-level warpage, and avoids the cost of a silicon interposer the SoC’s bandwidth does not need. In an iPoP stack, the memory package connects to the organic RDL interposer through an array of solder bumps. Underfill fills the gap around those bumps, adding stiffness and protecting the joints from mechanical stress. The Pro and Pro Max variants differ here, which we cover behind the paywall. The die shot and architecture tell us how Huawei allocated its silicon budget. The process tells us what SMIC can manufacture. We use the Helio G99 as the process reference for TSMC N6. Both SMIC N+3 and TSMC N6 are evolutions of previous 7 nm-class nodes. We used targeted TEM cross-sections through logic and memory regions, imaged in both fin-cut and gate-cut directions. Each cross-section caption gives its horizontal field width (HFW), the real width of the imaged area. We start at the transistor fins, then move up through standard cells, local interconnect, and SRAM. SMIC has not overtaken Intel or TSMC. It uses aggressive DUV scaling and DTCO to reach N6-class density, but that density doesn’t translate into comparable performance and efficiency, for two reasons: the node gap to leading-edge nodes, and Huawei’s core designs. Fin Profile One of the most important knobs in a FinFET process is the fin profile: the shape of an individual fin and the channel where current passes from source to drain. The ideal fin is tall, narrow, and nearly vertical. A taller fin increases effective channel width, while a narrower fin improves electrostatic control by thinning the body the gate must control. Push either too far, and the process pays for it: weaker drive current, fragile fins, taper, footing and line-edge variation that hit yield and device variability. The Intel 22 nm, 14 nm, and 10 nm fin cross-sections show how FinFET nodes have improved over time. 22 nm fins were a first-generation structure, relatively short, wide and strongly tapered. The shape limits current density and reduces gate control uniformity across the height of the fin. At 14 nm and 10 nm, Intel pushed the fins taller and narrower while also making the sidewalls more vertical. Rather than shrinking the device, these changes increase the effective channel width per fin and improve electrostatic control. The trade-off is that taller fins at tighter pitches are much more difficult to manufacture. Now, let’s compare the Helio G99 on TSMC N6 with the Kirin 9030 on SMIC N+3. Both processes are in the same class, with fin pitch of 30-32 nm on N+3 and 34 nm in our N6 cross-section. The pitch for N6 is especially interesting as N7’s HD library is generally listed with a 33 nm fin pitch, and N6 did not shrink pitches directly. Its density gains came from DTCO instead of tighter pitches. The 34 nm pitch was stable across our sampled region and serves more as a comparison against the SMIC N+3 we have not investigated further. Pinning down N+3’s fin patterning scheme takes more than one core unit. The CPU cores show a dense ~32 nm pitch, with the pitch between N-P fin pairs alternating between 78 and 88 nm. Logic alone may be consistent with dual-pitch mandrels of 120 and 110 nm, but this is a complex and unusual approach. Combining the pitch from the the 8T SRAM, which has more complex repeat unit, with the CPU core sequence allows us to reverse engineer the patterning steps with more confidence. As both the logic and SRAM should share the same base grid, a single CD mandrel lithography pattern with 128 nm pitch undergoing SAQP produces a die-wide ~32 nm grid (128 nm/4), which supports the pitch sequencing seen in both logic and SRAM cells. In the sampled cross-sections, N+3 shows a taller, narrower, higher-aspect-ratio fin than N6. The measured fin aspect ratio is ~9.5:1 on N+3 versus 7.8:1 on N6. N+3 also shows less top rounding, with an estimated radius of ~2 nm, compared with 2.8 nm on N6. Even though the fin widths differ, the ratio of top rounding to fin width tells the same story, with N+3 at 0.37 and N6 at 0.44. In a geometric sense, lower is better; a perfectly rectangular fin would have no top-rounding penalty. These are single-digit-nanometer features measured from a handful of cuts, so treat the absolute numbers as approximate. The important result is the relative gap: N+3’s fins are consistently taller, narrower and less rounded than N6’s. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Standard Cell A standard cell is the basic building block of chip layout: a fixed-height row pairing one NMOS and one PMOS transistor that share a gate, tiled in a grid to build logic blocks. The key dimensions are contacted gate pitch (CGP), cell height (CH), fin count, and the lower-metal routing grid. To measure density, we use the Bohr metric: a weighted average of NAND2 gate area (60%) and scan flip-flop area (40%). This represents a realistic mix of combinational and sequential logic. This metric has its limitations, especially for complex cell layouts like TSMC’s FinFLEX, which alternates cells with different fin counts. Even so, it is the best metric for a pure process-level comparison. Another important measurement is the fin pitch; it refers to the distance between two fins of the same transistor. In a FinFET process, multiple fins are used in each transistor to increase the drive current and thus performance. TSMC N6 ships both a high-density (HD) library with 2 PMOS and 2 NMOS fins per cell, and a high-performance (HP) library with 3 of each. More fins under the shared gate mean more effective channel width. HP cells switch harder at the cost of area. Designers mix the two on a die, primarily spending HP cells on timing-critical paths, and matching their PPA targets. In the Cortex-A55 core of the Helio G99, we found a cell height of 240 nm for the HD cell. MediaTek has used HD cells in the G99 to minimize die size and thus cost. As an SoC for budget smartphones at ~$100, this is essential. By contrast, we found only one library in the Kirin 9030, with 2 NMOS and 2 PMOS fins. This suggests a narrower library strategy than TSMC N6, where both HD and HP libraries are widely used. This likely reflects the smaller customer base and the more constrained domestic design and electronic design automation (EDA) ecosystem. In all three CPU cores of the Kirin 9030, we found cell heights of 228 nm, 5% smaller than on N6. This is also a reduction of 9.5% over SMIC N+2’s cell height of 252 nm. SMIC N+3 and TSMC N6’s HD library both feature a CGP of 57 nm. For SMIC, this is a 9.5% shrink over N+2. In the past, CGP and cell height alone may have been enough to compare transistor density. Now, however, we must consider scaling boosters and DTCO as well. SMIC’s density gain does not come from EUV. It comes from using every available DTCO booster aggressively. First is fin depopulation: reducing the number of NMOS and PMOS fins in each cell. The first FinFET nodes started with 3 or 4 fins for each transistor. SMIC N+3 and TSMC N6 HD both use only 2 fins per transistor, trading drive strength for density. Next is contact over active gate (COAG). By landing the gate contact directly over the active gate, instead of out over the isolation region, the cell height drops. N+3 integrates COAG while N6 does not. Our N+3 gate-cut cross-sections indicate COAG, with the gate contact sitting over the active region, while N6 shows an off-gate contact. Last is single diffusion break (SDB). Diffusion breaks are inserted between cells in the same row to provide electrical isolation, but they also introduce local layout effects (LLE), layout-dependent shifts in electrical characteristics. In the past, a double diffusion break was used, consuming the space of two CGPs. SMIC N+3 and TSMC N6 instead use SDB, saving area but increasing LLE sensitivity. This must be controlled at the process level and accurately modeled in the process design kit (PDK) so that EDA tools can account for it. Overall, SMIC N+3 has a transistor density of 113.4 MTr/mm², slightly above TSMC N6 at 107.7 MTr/mm². Even without EUV, SMIC has achieved density beyond TSMC’s mature N6 node which utilizes EUV. Metal Stack The smallest critical dimension in the teardown is M0; SMIC N+3 uses a 32.5 nm local metal pitch. That is smaller than the 36 nm M0 pitch on Intel 18A in Panther Lake. However, this does not mean that SMIC has a better process than Intel 18A or TSMC N3P. M0 is a local intra-cell routing layer. Its usefulness depends on the full interconnect stack: M1 and M2 pitch, track count, via and line resistance, design rules, mask count, overlay control, and routing flexibility. The 32.5 nm M0 is consistent with self-aligned quadruple patterning (SAQP), whose four-population line-width loading we read coarsely as alternating widths of 21.5 to 24 nm; M1 and M2, at 38 and 40 nm, are consistent with self-aligned double patterning (SADP), a single A/B split. On TSMC N6, M0, M2, and M3 sit at a relaxed ~40 nm and are consistent with SADP-class double patterning, with no need for quadruple patterning. That said, we measure M2 for example at ~43 nm, likely inflated by sparse routing. We do not assign any specific layer to EUV from our cross-sections; the distinction we can draw is double versus quadruple patterning, not lithography wavelength. Transistor-level density in the front-end-of-line (FEOL) sets an upper bound, but the design is ultimately limited by what the interconnect stack can route. The lowest metals are the most important for standard-cell density, but the semi-global and global layers determine how usable that density is at the block and chip level. Two axes are commonly used for chip cross-sections: the fin-cut and the gate-cut. The micrograph above is a fin-cut and shows metals 0 through 3. This axis lets us see the even-numbered metals, with M0 right above the fins. There are two kinds of M0 lines. The first are the power rails; these are wide wires for the VDD and VSS running horizontally at the top and bottom edges of each standard cell. The wide wires measure 55 nm across, more than double the other M0 lines. Their width minimizes resistance and reduces IR drop. The second kind are intra-cell wires, short segments within the cell that connect terminals to M1. These have alternating widths between 21.5 and 24 nm. The M0 pitch is 32.5 nm, a 19% reduction versus N+2 and N6. At this pitch, DUV patterning requires more aggressive multi-patterning, increasing mask count, overlay sensitivity, process complexity and cost. M0 is below what a single DUV-defined spacer (SADP) can resolve, so SMIC cascades a second spacer step (SAQP). The cross-section reflects the cost: the M0 trenches are visibly more re-entrant (narrower at the bottom than the top) than M1 or M2 on the same chip and carry a bright barrier-rich foot where the trench meets the etch-stop layer. That shape is partly the intended damascene profile, as a slightly narrow bottom helps void-free copper fill, but its magnitude at M0 is driven by the tight pitch and the higher trench aspect ratio. Intel 18A supports an M0 pitch of 32 nm, although Panther Lake has only shipped with a looser 36 nm pitch. This is due to Intel’s heavy usage of HP libraries. Among leading-edge nodes, 18A has the loosest M0 pitches due to PowerVia. With power routing moving to the backside, congestion is reduced, and the entire front-side metal stack can be used for signal routing. M2 is the first true inter-cell routing layer. It runs horizontally like M0 but spans across multiple cells to carry block-level signals. The M2 pitch sets the cell’s track height – the number of M2 tracks that fit between the VDD and VSS rails, defining what the library calls a 6-track or 7.5-track cell. This layer is the most important, limiting the routing of entire blocks. SMIC N+3 features a 5.7-track cell. The M2 pitch is 40 nm, a 5% decrease over N+2 and the same as N6. This shrink keeps the pitch at the edge of what is possible with double patterning. Future nodes will need to increase the number of masks for M2 as reducing the number of tracks is much harder due to the limitations in routing. The micrograph above is in the perpendicular direction, the gate-cut, and shows metals 0 through 4. This allows us to see and measure the odd-numbered vertical metal layers. The M1 pitch is 38 nm, 9.5% less than N+2 and 33% less than N6. The M1-to-gate ratio matters because it sets local routing flexibility. N+2 and N+3 use a 3:2 ratio, while N6 uses a 1:1 ratio, explaining the huge differences in M1 pitch. The more M1 lines there are compared with the gates, the more flexibility there is for power and signal crossing within the cell. Routing flexibility enables more complex and better cells. Clean fractional ratios are also preferred as a grid is periodic and improves layouts. The 3:2 ratio gives SMIC more local routing flexibility than a strict 1:1 grid, but it also complicates layout and patterning. This is a DTCO choice, with SMIC increasing process complexity to recover density and routability without EUV. This 3:2 ratio is not very popular in the leading-edge nodes. TSMC has only used it on N7+, the N5 family, and the short-lived N3(B). They have switched back to a 1:1 ratio for N3E. Intel has only used it on the 10 nm/Intel 7 family, with Intel 4, 3 and 18A all using a 1:1 ratio. Samsung is the only one still using a 3:2 ratio at the leading edge, using it in the SF4 and SF3 families. It remains to be seen if SMIC will remain at a 3:2 ratio or move to a 1:1 ratio with its future nodes. The industry is still actively exploring these local-routing ratios. At VLSI 2026, imec will be presenting work on even higher ratios, including a 2:1 scheme that can reduce area by up to 14%. We will be covering the conference in a future newsletter article. Subscribe We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. The final local interconnect layer for N+3 is M3, with a pitch of 44 nm. The M3 pitch is the same as on N+2 and 10% larger than on N6. The semi-global layers carry the majority of block-level signal routing. They have a coarser pitch than the lower local layers. On leading-edge nodes, they are designed to sit at the limit of DUV single patterning. M4 through M11 pitches were found divided between 80–82 nm (M4–M6), 128 nm (M7–M10), and 148 nm (M11). Given limited sampling, it is possible these are divided further in dense routing areas. At the top are two giant metal layers, M12 and M13. These have kept the same pitches as N+2 at 1920 nm and 4600 nm respectively. While the lower layers’ pitches are generally fixed by the process and library, the upper layers vary much more in pitch and count, depending on the design. Even two smartphone SoCs on the same process can have wildly different metal stacks. The Helio G99 carries fewer routing layers, reaching coarse metal pitches of 850 nm by M9, while the larger and higher-performance Kirin 9030 keeps fine pitches until M11. SRAM At the leading edge, SRAM is much more difficult to scale than logic. TSMC’s latest nodes have seen little to no bitcell scaling, while logic still has more DTCO levers to pull. While looking for other logic libraries in the GPU compute units, we stumbled upon the SRAM. The most common type of SRAM has 6 transistors (6T), but this cell had 8 transistors (8T) instead. 8T SRAM adds two transistors to form a dedicated read port. Unlike a 6T cell, where reading disturbs the storage, the decoupled read port removes read-disturb, improving read stability and letting the cell be pushed harder for performance. At first glance, the cut looked like an unusual logic library, with each cell row having 3 fins of one polarity and 5 fins of another. The rows also alternated in orientation. Energy-dispersive X-ray spectroscopy (EDS) resolved our confusion. The cut had not landed on the GPU logic, but on the SRAM macro beside it. The unusual fin pattern was due to the SRAM library. We return to EDS in the process flow analysis behind the paywall. SRAM libraries are not like traditional logic libraries. Due to the unequal number of PMOS and NMOS transistors, they require specialized rules and layout libraries. They do not need the flexibility of logic libraries, so they are hyper-optimized for one purpose: dense, reliable memory. The SRAM cell we found is a 1:2:2-2:2 cell. This means there is 1 fin per pull-up (PU) PMOS transistor, and 2 fins per pull-down (PD) and pass-gate (PG) NMOS transistor. These 2 PU, 2 PD and 2 PG transistors would usually form a single 6T high-current cell (HCC). An 8T HCC adds a read-pull-down (RPD) and a read-pass-gate (RPG) NMOS transistor, each with two fins. We measured a cell height of 406 nm, which brings the bitcell size to 0.0463 µm². That is a theoretical peak density of 21.6 Mib/mm². We estimate that a 6T HCC would have a cell height of 292 nm and a size of 0.0337 µm². This is ~12% larger than a 6T HCC on Intel 3 and 4. We also estimate the 6T high-density cell (HDC) to have a cell height of 228 nm and a size of 0.0260 µm². This is coincidentally the same as the logic standard-cell height measured earlier. The estimate puts the cell near Samsung 7LPP/5LPP and slightly below TSMC N7/N6. That is a theoretical peak density of 38.5 Mib/mm². 6T HDC is arguably the most important cell as it is used for the largest caches in a chip, the L3 caches and system-level cache (SLC). Both the Kirin 9020 and 9030 have split the SLC into 4 banks to raise total SLC bandwidth. In the Kirin 9030, the SLC increased from 2 MiB to 3 MiB per bank. Correspondingly, the number of arrays within the bank also increased by 50%, from 16 to 24. Each array can store 128 KiB and forms an orderly pattern on the die shot. From the Kirin 9020 to the Kirin 9030, the area of a 128 KiB SLC array decreased from 0.0477 mm² to 0.0392 mm², an 18% shrink. The achieved density is 25.5 Mib/mm², 66% of the theoretical maximum. While the SLC was quite similar across both chips, the L3 has seen some major changes, particularly in terms of its layout. The total capacity also went up from 10 MiB to 12 MiB. Much like the SLC, the L3 is also split into 4 banks. In the Kirin 9020, an L3 bank consisted of 16× 128 KiB arrays and 16× 32 KiB arrays. However, an L3 bank in the Kirin 9030 instead consists of 48× 64 KiB arrays. In the Kirin 9020 L3, a 128 KiB array was 0.0513 mm² and a 32 KiB array was 0.0154 mm². The size of the 128 KiB array is different on the L3 and SLC as the assist circuitry for the two arrays differs depending on their purpose. In the Kirin 9030 L3, a 64 KiB array is 0.0210 mm². Although not a like-for-like comparison, normalized for capacity, it is 18% smaller than the 9020’s 128 KiB L3 array and 31% smaller than its 32 KiB L3 array. The achieved density is slightly lower than the SLC, at 23.8 Mib/mm², 62% of the theoretical maximum. Unlike the L3 and SLC, the prime cores’ private L2 cache uses a 2-bank design. As the prime cores’ L2 is latency-critical, it likely uses 6T HCC instead of 6T HDC. The 9020 has 16 arrays in each bank while the 9030 has 32. Each array has a capacity of 32 KiB. A 32 KiB array in the L2 shrank from 0.0171 mm² to 0.0142 mm², ~17% smaller. The density is 17.6 Mib/mm², ~59% of the theoretical maximum for 6T HCC. SRAM scaled well from N+2 to N+3, shrinking by ~19%, close to the theoretical logic shrink. The caveat is that N+2’s bitcells were unusually large, bigger than comparable 7 nm-class nodes, so part of the gain is catch-up rather than true scaling. With the insights from STEEL’s teardowns, we will be doing a deep dive into SRAM in a future newsletter article. Subscribe Everything above came out of a single STEEL teardown: die annotation, block-level area analysis and TEM cross-sections through logic and SRAM. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Future Roadmap The same cross-sections that pin down N+3 also show where SMIC can go next. Although N+3 is already close to the practical limits of DUV multi-patterning in several layers, SMIC still has a few scaling levers left. A theoretical N+4 would likely start with cell height. N+3 uses 5 M0 tracks between its power rails. Moving to 4 M0 tracks, as on SMIC N+2 and TSMC N6, could reduce cell height by roughly 15%. The routing grid is only one side of the shrink; the front end also must fit into the smaller cell. One possible FEOL lever is reducing the p-to-n isolation spacing from two diffusion grid units to one. Intel used this scaling booster on Intel 4, and TSMC did so on its N3 family. This path trades layout flexibility for density. Fewer M0 tracks reduce local routing resources, while tighter p-to-n spacing raises integration and design-rule difficulty. M2 is also constrained by the cell height shrink. For SMIC to maintain a ~5.7-track cell, M2 would need to move toward ~35 nm. That would move another layer into SAQP territory. SMIC could also reduce the CGP from 57 nm to 54 nm. Intel reached a similar CGP on Intel 10 nm/Intel 7 without EUV. The local interconnect is also tougher. If SMIC keeps the 3:2 M1-to-gate ratio, M1 would need to shrink to 36 nm and would likely require SAQP as well. If SMIC moves to a 1:1 ratio, M1 could relax to 54 nm, but it would give up routing flexibility. Under this theoretical path, we estimate that SMIC N+4 could reach a cell height of 198 nm and a CGP of 54 nm, implying a Bohr density of 137.8 MTr/mm², on par with TSMC N5 or Samsung SF4. However, the difficulty is cumulative. Each step is individually plausible, but together they make N+4 harder than the transition from N+2 to N+3. It will likely take longer, cost more, and carry less process margin. A theoretical N+5 would require a larger integration shift. One possible path is backside contacts (BSCon), moving power routing and source/drain contacts to the backside, which would reduce front-side routing pressure and enable another reduction in cell height. The front-side metal pitches could relax to reduce the process complexity. M0 would likely relax slightly to ~34 nm, and M2 and M4 pitches could relax further. CGP is unlikely to shrink much further. Even with EUV, 48 nm has been the practical limit for yield and process control. This approach would allow N+5’s cell height to fall to 170 nm and its CGP to 53 nm. This implies a Bohr density of 163.6 MTr/mm², on par with Intel 18A’s HP library. However, this would not make N+5 cost-competitive with the leading edge. It would reach a similar density through a much more expensive route. The integration difficulty rises sharply, with new process flows for backside alignment, wafer thinning, contact reveal, and backside metallization. Past this point, standard density and interconnect scaling become increasingly unattractive. That is where Huawei’s roadmap stops looking like a normal foundry roadmap and starts looking like a packaging roadmap. At ISCAS 2026, Huawei unveiled its tau (τ) scaling law, reframing process scaling in the time domain. τ is the time cost of data movement and processing: switching delays in transistors, RC signal propagation delays in circuits, compute, memory, and networking latency. Outside Huawei’s terminology, this is called system-technology co-optimization. This is Huawei’s answer to its lack of EUV lithography. Without EUV, planar density cannot keep pace with TSMC, Intel, or Samsung. If transistor density cannot shrink further, Huawei’s alternative is to shorten wires, reduce buffering, and stack logic vertically. “LogicFolding”, Huawei’s implementation of this new scaling idea, is, in practice, an aggressive 3D stacking approach. AMD V-Cache places SRAM above or below a CPU die. AMD’s MI350X places active interposer dies (AIDs) underneath accelerator and compute dies (XCDs), with the AIDs handling cache, IO interfaces, the network-on-chip (NoC) and embedded metal-insulator-metal (MIM) capacitors. With LogicFolding, parts of the same logic block are split across multiple active dies bonded face-to-face at ultra-fine pitch. This allows Huawei to shorten some critical paths and reduce buffer overhead, not merely add cache capacity or offload the IO and interconnect. Shortening wires is where the higher clocks come from. A large share of a modern core’s delay and energy budget goes into driving long interconnects and the repeater buffers along them. LogicFolding distributes a block’s critical-path gates across multiple stacked tiers bonded at a very fine pitch, so the bond interface behaves like an additional metal layer and the longest paths get shorter. That is how Huawei expects to recover frequency and efficiency it cannot get from the process alone. Huawei’s roadmap shows its intent. Prime core frequency is targeted to rise from 2.75 GHz in the Kirin 9030 to roughly 5 GHz by 2031, far beyond what planar scaling alone could deliver. Prime cores with 3.1 and 3.39 GHz clocks are being tested in its labs, although their power consumption is unknown. Beyond that, chips are in the design, simulation or pathfinding phase, meaning the frequencies are targets. However, the direction matters more: LogicFolding also helps with performance, not just density. The catch is that Huawei’s density claim is not directly comparable to foundry densities. A stacked design can report more transistors per package footprint by adding active layers, even if each patterned die remains well behind TSMC or Intel in front-end density. This is how Huawei can claim to reach foundry 14A-equivalent density by 2031. This is not a like-for-like foundry comparison, with Huawei using stacked logic and measuring density per package footprint. On a normalized Bohr-density basis, SMIC N+3 is ~114 MTr/mm², 38% less than Intel 18A’s HD library. Huawei’s 3D roadmap closes the gap by stacking active logic, reaching 215 MTr/mm² by 2030. In 2031, the roadmap density jumps to 295 MTr/mm², implying either a third active layer, partial EUV insertion or aggressive planar DUV scaling. Huawei’s methodology makes other foundries look much denser as well. Applying it to AMD’s MI450X with an N2 top die on an N3P base die yields a theoretical density of 460.2 MTr/mm² in 2026, compared with Huawei’s 295 MTr/mm² in 2031. This Kirin 9030 does not use LogicFolding, remaining in a conventional mobile SoC package. Instead, it forms the baseline for how far Huawei and SMIC can push planar scaling. Future teardowns of Kirin and Ascend chips will show both planar logic density and Huawei’s hybrid bonding solutions. Export controls changed China’s optimization problem rather than ending it. EUV restrictions raised the cost and complexity of leading-edge manufacturing without freezing it. SMIC reaches N6-class logic density through DUV immersion, SAQP and DTCO, while Huawei shifts more of the burden onto architecture, packaging and system-level integration. Future nodes will be tougher. N+3 still had room to tighten local metals and reduce cell height and CGP. Further scaling without EUV leaves fewer levers. More aggressive multi-patterning adds masks and overlay error. SMIC can keep pushing DUV, but each step will get more expensive and less forgiving. The design side is just as critical. Huawei had domestic EDA tools and flows before the Kirin 9030, with the Kirin 9000s, 9010 and 9020 making that clear. Huawei was able to ship multiple consumer SoCs on SMIC N+2 and N+3 while cut off from the Western EDA stack. US export controls restricted EDA tools for advanced chips in 2022 but did not target tools for more mature chips. In 2025, the US government briefly placed much broader restrictions on EDA software from Synopsys, Cadence, and others, before lifting them less than two months later as part of a trade deal tied to rare earths. Huawei has been unable to access those tools because it remains on a US trade blacklist. That forced Huawei, SMIC and Chinese academic institutions to build their own tools and flows. Researchers at Peking University recently announced a prototype EDA tool for Huawei’s LogicFolding architecture, which requires a new flow to handle the multilayer layout and floorplan. This is not the same as replacing the full Synopsys or Cadence stack, but it shows where domestic EDA is headed: toward tighter co-optimization between architecture, process and packaging. These advances are also diffusing into the Chinese ecosystem. SMIC is licensing its N+2 and N+3 processes to HLMC/Hua Hong at the government’s direction rather than by choice. If the same process learning feeds into Ascend accelerators for AI training and inference, the choke point shifts from one named fab to an ecosystem. Alibaba’s T-Head silicon arm and Cambricon, a Chinese AI chip designer that is expected to supply ByteDance, could also be major beneficiaries. Sanctions aimed at SMIC alone become less effective once the manufacturing knowledge has spread to other fabs and design houses. China is not closing the gap with Intel, Samsung and TSMC. The teardown shows the opposite in several places: no EUV, no backside power, higher process complexity, and visible trade-offs. But China is still advancing. If domestic chips become good enough for phones, inference, networking and security-sensitive workloads, they can matter strategically without matching TSMC at the leading edge. Behind the paywall, we show what else STEEL can do, with material and process flow analysis of SMIC N+3, and analysis of the Kirin 9030 package. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline, access the full Kirin 9030 and SMIC N+3 analysis or to commission a custom teardown, contact sales@semianalysis.com.
Senate Republican on FISA holdup: ‘Stop playing the politics’
Sen. Shelley Moore Capito (R-W.V.) on Sunday slammed her fellow lawmakers after both chambers of Congress failed to pass bills to extend Section 702 of the Foreign Intelligence Surveillance Act (FI…
New York's victorious Knicks leave World Cup in the cold
The World Cup carnival arrived in New York on Saturday, but it was drowned out by the city's elation after the hometown Knicks broke a 53-year curse to win the NBA Finals.- No 'big buzz' - In an industrial section of Brooklyn, the manager of an indoor five-a-side arena said ahead of the Knicks win that "obviously the Knicks, as they should, are over-shining" the World Cup.
Rep. Tenney discusses US strike, FISA law, and anti-American rhetoric in NYC politics
Rep. Claudia Tenney, R-NY., discusses a lethal US strike in Venezuela against the Tren de Aragua gang leader and the lapse of FISA Section 702.
Letters: Bill Plaschke takes heat for Caitlin Clark complaints
Readers of the Los Angeles Times Sports section share their thoughts on Caitlin Clark, the Dodgers' gay pride effort, gambling and the NBA Finals.
Todd Young talks World Cup geopolitics, Section 702 — and 2028 - Live Updates
Between World Cup matches, Young weighs a looming surveillance fight and the GOP's next generation of leaders.
What Genres and Streamers Won 2025? And Who Lost? Plus Six Strategy Thoughts
(Welcome to the Entertainment Strategy Guy, a newsletter on the entertainment industry and business strategy. I write a weekly Streaming Ratings Report and a bi-weekly strategy column, along with occasional deep dives into other topics, like today’s article. Please subscribe.) Okay, time for the tenth and final article in my ten-part series recapping 2025. As I wrote two articles ago, my barometer for whether these articles are worth writing/publishing is whether they yield strategic insights, and once again, every subsection in this article has a strategic takeaway (or two). Honestly, these are the most important takeaways, since I step back and look holistically at the streaming wars in 2025. After I declare which streamers won and lost the year and which genres won and lost the year, I have six bonus thoughts. If you’d like to review the whole series... You can find the film flops here and here. You can find the TV shows flops here and here. You can find the top films here. You can find the top TV shows here, here and here. Then I declared my winners and losers in various categories here. You can find my 2024 recaps here. You can find the 2023 recaps here and here. And my 2022, 2021 and 2020 are all stored here. Yeah, it’s halfway through the year, and I’m just finishing this series up now. This year, I tried to space things out to not clog up my writing calendar, plus I had to wait for Fallout to (finally) drop off the charts. Well, that ended up pushing this series wayyyyy too far back on the calendar. Oh well. Next year, the goal will be to finish this series in March, but frankly, I just need more staff to make that happen. So please subscribe. Or, if you’re an advertiser (movie studio, FYC firm, or other), please reach out. Subscribe Streamer of the Year: Netflix Honorable Mention: Paramount (and CBS) So, just last week, I wrote about how Netflix has lost seven of its top twelve scripted shows in the last year. And I shared two very dour looks at Netflix’s potential slowdown this year and last. Guess what? They’re still the number one streamer in America. In 2025, they dominated new streaming shows (even if most of those new hit shows aren’t coming back for future seasons), they had the two biggest films, and they had the top returning TV show by a mile. The world is complicated, nuanced and messy. There may be warning signs of a future Netflix slowdown, but in 2025, Netflix was still the number one streamer. Note what I didn’t say? That Netflix has “won” the streaming wars, because obviously the streaming wars are still ongoing and, more importantly, YouTube is still growing—so now YouTube has “won” the streaming wars?—while Netflix’s share of TV consumption has stalled out. Avoid simplistic talking points, especially if they’re constantly repeated and could fit on a bumper sticker. I had trouble picking the second-place streamer this year, because all of the candidates for second place—Prime Video, HBO Max, and Paramount+—had some hits, but no one stood out. Then I saw this update from Nielsen on the top shows on TV in the 2025-206 season. Sure enough, Netflix had five of the top ten shows! And they had ten of the top 31 shows and fifteen of the top fifty. But CBS/Paramount+ actually had more shows in the top thirty and the top fifty. Paramount+/CBS had twelve of the top thirty shows and nineteen of the top fifty. Let me emphasize that: CBS/Paramount+ had more top shows in the 2025-2026 season than Netflix. And this look was just for TV shows, not live sports, an arena Netflix barely plays in. Meanwhile, Paramount-Skydance’s market cap is a fraction of Netflix’s. That’s weird, right? Streaming Loser of the Year, TV… We’re just getting started with this issue, but the rest is for paid subscribers of the Entertainment Strategy Guy, so if you’d like to find out… ...what streamer lost the year in TV... …whether Netflix could win the title for “film” streamer too… …who won the Disney vs Warner Bros. battle for theaters… ...what TV genres won and lost the year... ...what film genres won and lost the year... ...what film genre people think is thriving on streaming but isn’t… …why F-BOSSS TV shows don’t hold the same sway in the 2020s… …what it means to “flop” as a film on streaming… …UK shows underperforming on streaming… And a lot more... ...please subscribe! We can only keep doing this great work with your support. If you’d like to read more about why you should subscribe, please read this article about the Streaming Ratings Report, why it matters, why you need it, and why we cover streaming ratings best.
Alumni Ronay Bakan Wins Multiple Dissertation Awards from the American Political Science Association
Department of Political Science Ph.D. alumnus Ronay Bakan has won two different awards from sections of the American Political Science Association (APSA) for her dissertation titled “Counterinsurgent Urbanism: Weaponizing Land and Heritage in the Kurdish Region of Turkey”. Bakan won the Best Dissertation Award from the Middle Eastern and North Africa (MENA) section, and Honorable...
Alumni Ronay Bakan Wins Multiple Dissertation Awards from the American Political Science Association
Department of Political Science Ph.D. alumnus Ronay Bakan has won two different awards from sections of the American Political Science Association (APSA) for her dissertation titled “Counterinsurgent Urbanism: Weaponizing Land and Heritage in the Kurdish Region of Turkey”. Bakan won the Best Dissertation Award from the Middle Eastern and North Africa (MENA) section, and Honorable...
Scientists stunned by two-headed worms—now they’re multiplying without limits - Futura-Sciences
The Unusual Reproduction of Stenostomum brevipharyngium Meet Stenostomum brevipharyngium, a microscopic flatworm that has no need for romance or even a partner when it comes to making more of its kind. This species reproduces by paratomy, an asexual process in which a new worm forms from the middle section of...
iOS 27: All the New Health and Fitness Features
Apple was rumored to be working on an AI health service, but it was scrapped well before the iOS 27 beta came out. It could resurface in the future, but for now, there are a handful of health and fitness changes in the update. Design Apple redesigned the Browse section of the Health app, and it now uses a card-style interface instead of a list. It is more colorful and easier to see the different categories.
House Rejects Bill to Extend Surveillance Power With FISA Section 702 Set to Expire
A measure to temporarily continue a key surveillance law fell well short of the support needed to pass, further raising the chances that it will lapse on Saturday.
Pfizer's 2025 Impact Report Highlights Progress Across Patients, Planet, and Responsible Business
Here at Pfizer, we are in the business of breakthroughs, and while our focus is on making advancements that impact patients’ lives, we are also aware of our work’s broader impact on the world. Every year, we take stock of the impact our work has on the world, the environment, and people themselves in our Impact Report.
Business Restructuring Review Vol. 25 No. 3 May-June 2026
In This Issue Texas Bankruptcy Court Adopts Barnet Rule Requiring Foreign Debtor to Have U.S. Assets to Be Eligible for Chapter 15 Relief In In re Siu-Fung Ceramics Holdings Limited, No. 24-33299, 2026 WL 382424 (Bankr. S.D. Tex. Feb. 10, 2026), the court denied petitions for chapter 15 recognition of Hong Kong bankruptcy and liquidation proceedings commenced on behalf of an individual debtor and a group of companies that he owned or controlled. According to the court: (i) the corporate debtors' Hong Kong liquidation proceeding was not eligible for chapter 15 recognition because the attorney retainer upon which such relief was based was not funded until nine months after the chapter 15 petition date; and (ii) the individual debtor's Hong Kong bankruptcy case could not be recognized because the debtor's "center of main interests" on the chapter 15 petition date was not in Hong Kong, and he did not even maintain an "establishment" there. [read more …] Southern District of Texas Clarifies Post-Purdue Course for Consensual Third-Party Releases and Gatekeeping Provisions In In re Container Store Group, Inc., 676 B.R. 356 (S.D. Tex. 2026), appeal filed, No. 26-20166 (5th Cir. Apr. 14, 2026), cross appeal filed, No. 26-20166 (5th Cir. Apr. 24, 2026), the U.S. District Court for the Southern District of Texas addressed consensual third-party releases and gatekeeping provisions in the aftermath of the U.S. Supreme Court's ruling in Harrington v. Purdue Pharma L.P., 603 U.S. 204 (2024). Consistent with existing Fifth Circuit precedent, the court confirmed that, in appropriate circumstances, consent for third-party releases may be obtained through a creditor's failure to opt out of granting that consent. But, the court ruled, consent through an opt-out mechanism essentially can never be inferred for creditor classes that stand to receive no recovery under a chapter 11 plan and that are deemed to reject the plan by operation of applicable bankruptcy law. Instead, those classes must affirmatively opt in to any release. The court also narrowed and remanded the bankruptcy court's acceptance of a broad gatekeeping provision, ruling that such provisions must correspond to the restrictions established by Fifth Circuit precedent. [read more …] Delaware Bankruptcy Court: Initial Transferee Need Not Be Defendant in Fraudulent Transfer Avoidance and Recovery Litigation The Bankruptcy Code gives a bankruptcy trustee the power to avoid asset transfers that are either made with the intent to defraud creditors or that are "constructively" fraudulent because an insolvent debtor did not receive adequate value in exchange. The Bankruptcy Code also permits recovery of an avoided transfer from not only the initial recipient, but also from subsequent transferees. Courts disagree over whether a transfer must actually be avoided before the trustee can seek recovery from a subsequent transferee and whether the initial transferee must also be a defendant in the recovery litigation against a subsequent transferee. The U.S. Bankruptcy Court for the District of Delaware weighed in on this debate in Phillips v. SS Associates LLC (In re ONH AFC CS Investors, LLC), No. 23-10931 (CTG), 2026 WL 312892 (Bankr. D. Del. Feb. 4, 2026). The court adopted the majority view, ruling that the initial transferee need not be a defendant in avoidance and recovery litigation against a subsequent transferee, but that the trustee must establish the elements necessary to avoid the initial transfer as part of the recovery litigation. [read more …] New York Bankruptcy Court Weighs In on Adequate Assurance of Future Performance under Assigned Leases and Chapter 11 Plan Exculpation Provisions In order to assume and assign an executory contract or unexpired lease, a bankruptcy trustee must cure most defaults under the agreement and provide "adequate assurance" of the assignee's future performance. However, the Bankruptcy Code provides no guidance as to the meaning of "adequate assurance" other than with respect to shopping center leases. In In re Broadway Realty I Co. LLC, No. 25-11050, 2026 WL 147505 (Bankr. S.D.N.Y. Jan. 19, 2026), the U.S. Bankruptcy Court for the Southern District of New York examined this issue in connection with a proposed assignment of thousands of residential leases as part of a free-and-clear sale of debtors' properties. The court held that "adequate assurance" does not mean a guarantee of the assignee's future performance, but merely demonstration that the assignee has the ability to satisfy the underlying obligations. The bankruptcy court also ruled that an exculpation provision in the debtors' chapter 11 plan exonerating non-estate fiduciaries from liability for actions taken in connection with the chapter 11 case was unobjectionable, provided it was limited in scope to postpetition conduct and actions taken in connection with implementation of the plan after its effective date. [read more …] Newsworthy Corinne Ball (New York) (Hall of Fame), Bruce Bennett (Los Angeles), Carl E. Black (Cleveland), Jeffrey B. Ellman (Atlanta), Brad B. Erens (Chicago), Gregory M. Gordon (Dallas), Heather Lennox (Cleveland/New York), Joshua M. Mester (Los Angeles), and Kevyn D. Orr (Washington) were included in the 2026 edition of Lawdragon 500 Leading Bankruptcy and Restructuring Lawyers. The Daily Business Review selected Isel M. Perez (Miami) as an "On the Rise" winner for the Florida Legal Awards. The Florida Legal Awards annually recognize those who have made significant contributions to the legal industry in Florida. Dan T. Moss (Washington/New York) was inducted as a Fellow in the 37th Class of the American College of Bankruptcy at its Annual Meeting in March 2026 in San Antonio, Texas. Christine Borries (Munich) was ranked in the practice area Restructuring/Insolvency in the 2026 edition of Chambers Germany. The 2027 edition of The Best Lawyers in Singapore™ recognized Sushma Jobanputra (Singapore) in the practice area Insolvency & Reorganization. The restructuring transaction involving Eissmann Automotive North America, Inc. received the "2025 Turnaround of the Year (Large Company)" at the Turnaround Management Association (Detroit) Annual Awards Reception. T. Daniel Reynolds (Cleveland) and Nick Buchta (Cleveland) represented subsidiaries of Eissmann Group Automotive in connection with the parent company's German insolvency proceedings. Roger Dobson (Sydney) is among 40 Jones Day lawyers recognized by The Best Lawyers in Australia 2027 for his contributions in Banking and Finance Law; Distressed Investing & Debt Trading; Insolvency and Reorganization Law; Litigation. An article written by Corinne Ball (New York) titled "Ard Finance—A Global Enterprise Combining an LME With a Foreign Insolvency Proceeding and Chapter 15" was published in the April 21, 2026, edition of the New York Law Journal. An article written by Alex Sapp (New York) titled "Recent Developments in Section 510—Subordination" was published in the 2025 edition of the Norton Annual Survey on Bankruptcy Law. An article written by Brad B. Erens (Chicago) titled "New York Bankruptcy Court Approves Insider DIP Litigation Financing" was published on April 6, 2026, by Lexis Practical Guidance. An article written by Corinne Ball (New York), Dan T. Moss (Washington/New York), David S. Torborg (Washington), and Isel M. Perez (Miami) titled "New York District Court Affirms Narrow Scope of 'Public Policy Exception' in Chapter 15 Cases" was published on April 6, 2026, by Lexis Practical Guidance. An article written by Jeffrey B. Ellman (Atlanta) titled "Statutory Cap on Lease Rejection Damage Claims in Bankruptcy Applies to Solvent Debtors" was published on April 6, 2026, by Lexis Practical Guidance. An article written by Trisha L. Mowbray (Real Estate; Chicago) and Ryan Sims (Washington) titled "Chapter 11 Plan that Abridged Non-Debtor Lessee's Rights to Remain in Possession After Rejection Unconfirmable as Having Been Proposed in Bad Faith" was published on April 6, 2026, by Lexis Practical Guidance. Lawyer Spotlight: Ben Rosenblum Ben Rosenblum, a partner in the New York Office, represents debtors, creditors, and other parties in out-of-court restructurings and court-supervised proceedings, including chapter 11 cases, municipal bankruptcies, international insolvency matters, and stockbroker liquidations. His experience spans industries such as manufacturing, shipping, mining, aviation, energy, real estate, and telecommunications. Ben's notable debtor representations include Peabody Energy, the City of Detroit, Chrysler LLC, Spansion Japan, and Dana Corporation. Significant creditor representations include General Maritime Corporation, Calpine Corporation, American Home Mortgage, and Murray Energy. He currently represents creditors in Puerto Rico's restructuring. He also has extensive experience advising financial institutions on bankruptcy law as applied to derivatives.
New OMB rule could break science in the United States
The drug that saved your mother. The treatment your doctor recommended. The clinical trial that bought someone you love more time. None of it was inevitable. It required a system built to operate outside politics and sustained over decades, because science doesn’t operate on the timeline of a politician. That system is now under direct threat. The Office of Management and Budget (OMB) has proposed a new rule to regulate all federal grants, not just science, but housing, education, defense, NASA and everything in between, that would fundamentally change how research is conducted in the United States. There have been a lot of fires in the past 16 months, and if everything is an emergency, nothing is an emergency. But this is a very big deal. These rules would strip away the independence that has kept science from becoming a political tool. The good news is there’s still something we can all do. How the grant system was designed to work When I was a new faculty member, I was full of millions of ideas, so I sat down and wrote an NIH proposal. I worked on it for months and thought it was so good. Then I sent it to my mentor. It came back covered in comments. Places where my reasoning wasn’t as airtight as I’d thought, methods that could be stronger, gaps in my thinking that I had been too close to the work to see. It stung, as honest feedback always does, but peer review almost always makes the work better. In fact, it’s the backbone of how American science has functioned for generations. At NIH, submitted proposals go to a panel of scientists who have experience in the field. These are the people who can read research methods and spot their weaknesses, who understand when an experiment is designed well and when it isn’t. Applications are scored rigorously, and often only the top 3-20% of proposals receive funding. The people making funding decisions are required to justify them based on these reviews. To be clear: this is not a perfect system, and good science still goes unfunded more often than any of us would like due to limited resources. There is also criticism that peer review may undervalue bold ideas that are risky but could have high payoffs. But the peer review system is nonetheless a meaningful part of the grant selection process. While thoughtful and careful changes could improve the system, the changes being proposed by OMB will not make things better. The rule that could change everything Through this OMB proposal, the system that helps decide what gets funded is being dismantled. There are many troubling elements buried in this proposal, but three provisions stand out in particular. Each would be damaging alone. Together, they would change what kind of science gets done in America, and who it serves. 1. Political appointees would decide which science gets funded, and peer review would be explicitly sidelined or ignored. The guidelines your doctor follows, the standards that determine what’s in your air and water, the drugs that get approved for your family: all of it starts with a funding decision. Right now, that decision is made by scientists who can evaluate whether the work is actually sound and whether it could move the needle forward. Under this proposal, funding decisions could be made by political appointees. The careful, expertise-driven review process that shapes grant funding would be effectively sidelined. That means that a poorly designed study could get funded simply because someone in a political office liked the sound of it, while rigorous, important work doesn’t get funded because it no longer aligns with the administration’s priorities. In other words, critical work that benefits all of us could now be missed just because it has become politically inconvenient. 2. Grants could be canceled at any point, without warning, in the middle of ongoing work. Say your tax dollars have been paying for a cancer study for two years. The grant was awarded for five years, so the team is mid-experiment. There are three additional years’ worth of answers that could change how the disease is treated for hundreds of thousands of people. With this new rule, the federal government could cancel the remaining funding tomorrow, walk away from the commitment it made with your money, and have no legal obligation to finish what it started. This is a huge waste of money. There are rarely other sources of funding for this work, which means the team, the graduate students, postdocs, and research staff who have dedicated years of their careers to this project could lose their jobs. Patients who have contributed their time to studies may not see it turn into useful learnings for others. Every hour of work already completed could result in nothing useful. Science can take decades to get to tangible outcomes. It needs a stable funding system to flourish. 3. Researchers would have a harder time communicating their findings without pre-approval from the federal government. There is a saying from Sir Mark Walport: “Science isn’t finished until it’s communicated.” Science is no use to anyone if it is kept locked away in the labs that produced the data. The proposed rule could make communicating research findings harder in a number of ways: Make it harder for scientists to widely share their findings in scientific journals. Publication costs, including journal fees that allow for broad public access, could not be paid for by federal funds which is often how scientists pay these costs. Restrict researchers from engaging publicly about how their findings should inform policy or public health guidelines. This would restrict scientists from doing the work that transforms years of lab work into decisions that actually affect people’s lives. Make it harder for scientists to attend conferences. Conferences would now need to be approved by the federal agency at the time of grant award. This disadvantages conferences or publications that are not politically aligned. Conferences are a key way in which scientists learn about work happening in their field so they can collaborate and build on each other’s findings. What good is science with a muzzle? The long-term impact These changes could (and hopefully would) be reversed under the next administration. But by then, damage has been done. Once projects are halted or denied funding by political appointees, people leave their science careers for other paths or even leave the country to do their amazing science elsewhere. You cannot pause a scientific study the way you pause a subscription you decided isn’t useful anymore. You cannot freeze a research team that depends on salaries to feed their families, causing a scramble for replacement funding that, in most cases, simply does not exist. When the money stops, everything stops, and all the work in progress and its potential are lost. Despite all of the language about reducing waste, fraud, and abuse, this new proposed rule increases the administrative burden tremendously. Every researcher watching this unfold will make a rational decision: don’t start anything that will take a decade to finish. This includes not building a team around funding that could vanish, or asking the big questions that need patience and stability to answer. The most consequential science, the kind that produces the treatments and the breakthroughs that reach your doctor’s office twenty years from now, is exactly the science that would be abandoned first. This is still a proposal, so we can all do something Some worry this rule is already a done deal. But by law, OMB is required to open a public comment period. Those comments matter because they inform members of Congress, they can be used in litigation, and they create a public record. So here’s what you can do: Submit a public comment. The public comment period on this proposed change is open until July 13. Anyone can submit a comment, and OMB is required to respond to substantial ones. Each comment must be different to count as distinct; identical comments will be counted only once. Comment as an individual, not on behalf of your organization. Here’s a full resource to help you, with useful examples, but in general: Share a story about how science or federal funding has benefitted you or is involved in your work. Are you or someone you loved a cancer survivor? Do you know someone with Alzheimer’s? Have you received NIH/NSF or other federal funding? All of these can be stories you use to highlight why you care. Explain why you’re worried about these proposed changes. You can use the wording found here or in other resources to help you. Ask them to withdraw this proposed rule. Contact your elected representatives. Congress allocates money to federal agencies to spend, and it has oversight of how that process works. You can let your representatives know this proposed change concerns you and ask them to intervene. There are levers they can push that can help at this moment. Let others know why federal funding matters. This isn’t just about science, but ALL federal grants, including for education systems, defense projects, and more. The process, including the importance of federal funding, is invisible to many. We can all make it more visible by sharing how science benefits us and why we value it. You can also share this article, or any of the resources linked here, to help spread awareness! Bottom line We are quickly losing ground in scientific research in the U.S. More changes, like the proposed rule by OMB, would decimate our ability to conduct research here, leaving us all worse off: fewer treatments for pancreatic cancer, less research on pollution impacts, fewer answers for patients with rare disease, and more unaddressed health needs. The impact will be very real for all of us, regardless of where we stand politically. Using our voices for science is more important than ever. Love, LM Big thanks to Dr. Megan Ranney for reading this over and providing brilliant insights, as always. Dr. Liz Marnik, PhD, is Executive Director of The Evidence Collective at YLE and a science communicator and immunologist working at the intersection of public trust, science, and public health. You can find her on Substack, LinkedIn, Instagram and Threads. Your Local Epidemiologist (YLE) comprises a team of experts, ranging from physicians to immunologists to epidemiologists to nutritionists, working together with one goal: to “Translate” ever-evolving public health science so that people are well-equipped to make evidence-based decisions. The YLE suite of newsletters reaches over 475,000 people across more than 132 countries. This newsletter is free to everyone, thanks to the generous support of fellow YLE community members. To support the effort, subscribe or upgrade below: Subscribe
God's Laboratory: On Science in the Service of Myth
Scientists have located the Garden of Eden. It is in Botswana. This was reported not in the theology section of any publication but as a science story,
Far-from-perfect 10: Dodgers put up double digits in seventh to beat Pirates, spoil Paul Skenes' quality start
In a tie game in the bottom of the sixth, rain poured. Flags flew horizontally. Fans headed for covered sections. Then the rain stopped. A rainbow appeared. But...
The Bear’s Den, June 8, 2026
The Chicago Bears and Hammond Indiana stadium dominates the news and the comment sections
Excitement builds as LMH Health draws closer to completing Therapy Services renovations
The finish line is in sight for LMH Health’s renovation of its facility at the intersection of 6th and Maine Streets. Once complete, LMH Health Therapy Services, currently located on the second floor of the Main Campus, will relocate to a newly expanded clinic designed with patients in mind. The larger space will make it easier […]
Small Business Spotlight: Dog-Eared Books
Main St. is home to many local businesses, including the only locally owned bookstore in Ames. Dog-Eared Books has been open since March 8, 2021. They offer a wide variety of books, community events and a small cafe section. The business is owned by Amanda Lepper and Ellyn Grimm, both originally from Ames and both...
Minneapolis to rebuild George Floyd Square: Some fear businesses won't survive construction
Minneapolis is set to begin a major redevelopment project at George Floyd Square, sparking mixed reactions from the community as construction gets underway at the intersection of 38th Street and Chicago Avenue.
An up-close look at high-speed rail construction
The Hanford viaduct, a key section of California's high-speed rail project, is nearing completion as workers continue to make progress on the ambitious plan to connect the Bay Area to Los Angeles.
Letters to Sports: More calls for Angels ownership change
Readers of the Los Angeles Times Sports section give their thoughts on Angels owner Arte Moreno, the Rams acquiring Myles Garrett, the Dodgers and USC.
Hotel from ‘Pretty Woman,’ ‘Beverly Hills Cop’ cited for health violations
One of California’s most famous luxury hotels has landed in the crosshairs of Los Angeles County restaurant health inspectors. The Four Seasons Beverly Wilshire, located at the intersection of Rode…
Vanderbilt Health Pets of the Day: Freddy and Cooper
Today’s first Dog of the Day is Freddy, submitted by Beth Piazza of the Vanderbilt-Ingram Cancer Center. “Freddy was adopted on Valentine’s Day of 2024 from the Nashville Humane Association. He is the cuddliest 90-pound lap dog.“ Today’s second Dog of the Day is Cooper, submitted by Brandie Taylor of Medicine. “Cooper is a 14 year old chocolate lab. He loves eating and going to get pup cups!” Freddy and Cooper were featured in the June 9, 2026, edition of MyVUMC News. To see the archived collection of Vanderbilt Health Pets of the Day, go to: https://news.vumc.org/section/voice/pets-vumc/. Pet photos wanted! The Vanderbilt Health Pets of the Day are posted to the Voice section of Vanderbilt Health News and included in regular editions of the MyVUMC News newsletter, which is published twice a week by Vanderbilt Health News and Communications. Now through July 6, we especially want to see photos of your pets enjoying spring and summer. That might be having fun at the lake or beach, hanging out in the backyard, lying on the couch, or in the case of a pet fish, just living the life aquatic (we’re not too strict about what constitutes enjoying spring and summer). If you have a pet picture you would like to send in for consideration, go to the submission form here and follow the guidelines.
The Business School At The Intersection Of AI & China
P&Q's exclusive interview with HKUST Business School's new dean, a Belgian psychologist who has led schools on 3 continents.
Prep talk: Jack Kaplan and Brentwood teammates had quite a season
Brentwood won its first Southern Section baseball title with the junior pitcher helping lead the way.
Why business owners have few options to fix continued flooding near KC
Property owners in Blue Summit, unincorporated land outside Kansas City, are desperate to find a fix for persistent flooding at their intersection.
Decoding the Complex Science of Obesity
GLP-1. GIP. Amylin. Incretins. Peptides. NuSH. It’s not hard to see why the language surrounding modern obesity research sometimes feels like an alphabet soup of scientific terms. But behind each is a growing understanding of how the body regulates hunger, metabolism, energy use, and weight. It’s shaping what we know about how those systems might contribute to obesity.
Tearing down (and building back) that wall
I recently heard the news about 36 sections of the Berlin Wall coming to Blytheville as part of the National Cold War Center’s permanent exhibit space. It’s a fantastic addition...
Trump Targets Brazil with 25% Tariff, Citing Unfair Trade Practices
The proposal marks the latest effort by the administration to rebuild its tariff agenda through Section 301 investigations.
Missed Opportunities: Using Medicaid Section 1115 Projects to Improve the Health of Medicaid and Medicare Beneficiaries
Medicaid Section 1115 demonstration projects are widely used to test innovative policies but are subject to “budget neutrality” limits so that federal expenditures do not exceed what the federal government would have spent if the project was not adopted.
Apple Releases macOS Tahoe 26.5.1 to Fix Shutdown Issue Affecting Enterprise Users on M5 Macs
Apple today released macOS Tahoe 26.5.1, a small update to the macOS Tahoe operating system that came out last year. macOS Tahoe 26.5.1 comes three weeks after Apple released macOS Tahoe 26.5. Mac owners can download the software by opening the System Settings app and then navigating to the Software Updates section. According to Apple's release notes for the update, macOS Tahoe 26.5.1 addresses an unexpected shutdown issue affecting certain enterprise users on M5 Macs.
Prep softball roundup: Venice wins City Section Division I title
The Gondoliers defeated Eagle Rock 7-2 in City Section Division I softball final on Saturday.
Occupational Health and Safety Practices Among Primary Healthcare Workers in Bangladesh: A Cross-Sectional Study
Background Healthcare workers (HCWs) in low- and middle-income countries are exposed to substantial occupational risks; however, evidence regarding comprehensive occupational health and safet...
Prep talk: Loyola freshman pitcher Sheriff Hall can be a slayer in Division 2 final
The left-hander is scheduled to play Ganesha in the Southern Section Division 2 final
Letters to Sports: Angels aren't as 'competitive' as they think
Readers of the Los Angeles Times Sports section share their thoughts on Arte Moreno and the Angels as well as the Dodgers' struggles to stay healthy.
High school baseball: Southern Section championship game results and schedule
CIF Southern Section results from championship games on Friday night plus the schedule for Saturday.
High school softball: City and Southern Section finals scores and schedule
CIF City and Southern Section softball results from championship games on Friday night plus the Saturday schedule.
Tested: Windows 11's new Start menu lets you fully customize it, and it works surprisingly well
Windows 11’s new Start menu finally adds smaller layouts, removable sections, and deeper customization after years of user complaints.
Seeking Feedback on Plans To Merge Corporate Counsel Section Into Business Law Section - New York State Bar Association
At the April House of Delegates Meeting, the Corporate Counsel Section presented a recommendation to dissolve the Corporate Counsel Section and merge its members and programs into the Business Law Section. “After careful consideration over the last few years, the leaders of the Corporate Counsel Section agreed unanimously to merge the section into the Business Law Section of NYSBA,”
Witcher Dev Will Focus On Sequels Over Expansions For Witcher 4, 5, 6
The Witcher 3 may be getting a big new expansion almost 12 years after launch, but you shouldn’t expect that to be the norm for the series going forward. From Witcher 4 on, CDPR will focus on full games instead of developing expansions, the studio said. In the Q&A section of CD Projekt Red’s latest...
Prep talk: Last of four softball-playing Justman sisters wants to go out a City champion
Zoe Justman will try to help Granada Hills High win the City Section Open Division softball title on Friday against Carson.
High school softball: Southern Section playoff scores and schedule
CIF Southern Section high school softball playoff scores and schedule.
Introducing Long Island Business Influencers: Accounting 2026
The professionals recognized in this year's Accounting Influencers section are not simply stewards of financial records — they are architects of the region's economic life, shaping how businesses grow, how nonprofits sustain their missions and how individuals and families build lasting wealth.
Apple Seeds First Public Betas of iOS 26.6, macOS Tahoe 26.6 and More
Apple today provided public beta testers with the first betas of iOS 26.6, iPadOS 26.6, macOS Tahoe 26.6, watchOS 26.6, and tvOS 26.6, with the software coming two days after Apple seeded the betas to developers. After signing up to beta test the software updates on Apple's beta site, public beta testers can download the new software using the Software Update section in the Settings app on each device.
PLAYLIST: Roots Songs All About Mental Health
The intersection of music and mental health is nothing new. Roots music is a perfect artistic vessel for thoughts and feelings around mental well being.
High school softball: Wednesday's City Section playoff scores
City Section high school softball playoff scores for Wednesday.
Sports
The Seattle Times Sports section covers teams and athletes in the Seattle area and Pacific Northwest, including the Seahawks, Mariners, UW Huskies, WSU Cougars, Seattle Sounders FC, Seattle Storm, Seattle Reign, high-school teams and coverage of plans for an NBA/NHL arena. Columnists Larry Stone, Matt Calkins and reporters Bob Condotta and Geoff Baker are featured.
Granada Hills, Carson advance to a fourth straight final meeting to decide City Section softball title
Granada Hills defeats San Pedro 12-9 in Open Division semifinals; Carson eliminates Birmingham 12-2
Section 4 H.S. sports' postseason results, top athletes through June 1
See which Section 4 teams are inching closer to the NYSPHSAA state championships.
JMIR Rehabilitation and Assistive Technologies invites submissions on implementation science in rehabilitation and assistive technologies
JMIR Publications invites submissions to a new section focused on “Implementation Science in Rehabilitation and Assistive Technologies” in its open access journal the JMIR Rehabilitation and Assistive Technologies.
‘The Office’ Editor Thinks AI Can Make Comedy Funnier
Welcome to Rendering, a Deadline column reporting at the intersection of AI and showbiz. Rendering examines how artificial intelligence is disrupting the entertainment industry, taking you inside key ...
Prep talk: Will next season's state championships in baseball, softball produce few opt outs?
Several Southern Section and City Section teams will not be participating in state playoffs this season.
High school baseball: Southern Section playoff results
CIF Southern Section baseball quarterfinal playoff results from Tuesday.
The world’s largest domestic sporting union announces first-of-its-kind fertility care
The Athletic explores the intersection of professional soccer and motherhood.
Business
The Seattle Times business section covers Seattle, the Eastside including Bellevue, Snohomish County, the Puget Sound region and Pacific Northwest. Coverage includes Amazon; Boeing and aerospace; Microsoft and technology; Starbucks, Nordstrom and retail; the state and U.S. economy, commercial and residential real estate; personal finances; and stock markets. Columnist Jonathan Talton is featured.
10 players capable of leading teams to boys volleyball state tournament
Some of Minnesota’s top players could lift their teams out of difficult sections.
Graduate Exhibition Showcases Intersection of Health, Technology, Art, Design
From digital data and technology to the environment, healthcare and the body, graduate students from across the College of Letters and Science at University of California, Davis, are pushing boundaries with their experimental research and creative expression. The results, varied in medium and discipline, will be on display at the Arts & Humanities 2026 Graduate Exhibition.
Apple Seeds First iOS 26.6 and iPadOS 26.6 Betas to Developers
Apple today seeded the first betas of upcoming iOS 26.6 and iPadOS 26.6 updates to developers for testing purposes, with the software coming two weeks after Apple released iOS 26.5 and iPadOS 26.5. Registered developers can download the betas from the Settings app on the iPhone or iPad by going to the General section and selecting Software Update. With the debut of iOS 27 approaching in early June, Apple is wrapping up work on iOS 26.
The science of elite soccer players returning to play after pregnancy and managing pressure
The Athletic explores the intersection of professional soccer and motherhood.
Creative compassion: Scatter Joy Project Founder Zach Thompson brings mental health advocacy to his hometown
Class of 2008 Marshalltown High School (MHS) graduate Zach Thompson, who went on to play baseball at Marshalltown Community College (MCC) before relocating to his current home state of Ohio, started the Scatter Joy Project in Columbus as part of an effort to destigmatize conversations around mental health and highlight the intersection between mental health […]
High school softball: Southern Section finals schedule
CIF Southern Section softball playoff schedule, with games set for Thursday, Friday and Saturday.
The Bites and Boutiques of Bellevue's Historic Business District
Take a walk down Fairfield Avenue for vintage finds, sweet eats, and other gifts and goodies.
Oral Health Preventive Knowledge and Behaviors in Relation to Caries Status Among Iraqi Dental Students: A Cross-Sectional Study
Introduction Knowledge and attitudes toward oral health, shaped by personal experiences, social context, family traditions, life events, and health education programs, are fundamental determi...
High school softball: Southern Section Saturday playoff scores
CIF Southern Section softball playoff scores from Saturday.
High school baseball: City Section championship game scores
CIF City Section championship baseball game scores from Saturday, May 23.
INSIDE H.S. SPORTS: Hornell wins Class C1 flag football title in first season
INSIDE H.S. SPORTS: In the program's first season, Hornell won the Section V Class C1 flag football title on Saturday, defeating Aquinas 26-6. Hear from head coach Mike Wilkinson, Parker
Letters to Sports: Angels have gone from bad to worse
Readers of the Los Angeles Times Sports section give their thoughts and opinions about the Angels, the Dodgers, playoff nirvana and more.
Letters to Sports: Angels have gone from bad to worse
Readers of the Los Angeles Times Sports section give their thoughts and opinions about the Angels, the Dodgers, playoff nirvana and more.
High school softball: City Section playoff scores and updated schedule
CIF City Section softball quarterfinal playoff results from Friday and semifinals schedule on Wednesday.
High school baseball: Southern Section playoff results and updated schedule
CIF Southern Section baseball quarterfinal playoff results from Friday, May 22, and the semifinal schedule.
Meet DFP Spring Fellow, Nicholas Gonzalez, Northwestern University -
Nicholas R. Gonzalez is a second-year doctoral student in the Department of Political Science at Northwestern University. His subfield is American politics, with research interests spanning political behavior, urban politics, and the intersections of race, class, [...]
Prep talk: Fremont, once best in City Section baseball, plays for Division III title
A freshman from Venezuela, Roiber Colmenares, leads Fremont into City Section Division III championship game.
The intersection of sports cards and gambling: How hitting a grail card led to rehab
Gambling addict Zachary Capp landed one of the best LeBron James cards out there in an online break — but it led him down a familiar path.
Prep softball roundup: Liliana Escobar pitches JSerra to 1-0 win over Garden Grove Pacifica
The senior right-hander strikes out 10 to send the Lions to the Southern Section Division 1 softball semifinals against Norco.
Patients warned of possible exposure at dental clinic in Philadelphia's Rittenhouse
Patients at a dental clinic in Philadelphia's Rittenhouse section may have been exposed to hepatitis C, hepatitis B, and HIV, according to the Philadelphia Health Department
Good Times
For more information about upcoming events in Citrus County this weekend and beyond, go to the events calendar at www.chronicleonline.com, events, event calendar. Also, read the daily Local section of