SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " Force " 4,277 found 🔀 AI-powered Shuffle
Kristaps Porzingis Health Issue Should Have Warriors Making New Trade Plan
Kristaps Porzingis is out for training camp with a health issue, which reinforces that illness-related absences are essentially impossible to control. Even if
Local hemp and CBD businesses say new federal restrictions could force them to close
A new federal ban on hemp products is set to go into effect near the end of this year.
High School sports participation stalls across the Carolinas
At least three high school teams in North Carolina recent months have been forced to cancel seasons due to low turnout.
Crisis responses, H.R. 1 fallout are challenging states' mental health delivery
North Carolina and Wisconsin are working to decouple law enforcement from crisis response, leverage 988 in care entry and conquer longstanding data silos. | State officials spoke frankly about the challenges they face in delivering equitable mental healthcare during policy sessions at the annual Behavioral Health Tech conference last week, held in Nashville.
WATCH: Justice Department files complaint against judges over immigration enforcement surge comments
Health care affordability tops survey of Michigan small business owners ahead of midterm elections
Taxes and workforce availability were also high on the list.
Health care affordability tops survey of Michigan small business owners ahead of midterm elections
Taxes and workforce availability were also high on the list.
Sandhills Community College Small Business Center expands to Moore and Hoke Counties
Small Business Center Director, Laura Kinsman. Photo provided by: SCCSandhills Community College (SCC) is launching a redesigned Small Business Center model that expands no-cost entrepreneurial support across Moore and Hoke Counties. Rooted in the College’s commitment to strengthening small businesses and entrepreneurship as drivers of economic growth, the enhanced model is led by recently appointed Small Business Center Director, Laura Kinsman. The model also includes two new Senior Business Advisors who will provide trusted expertise, stronger community connections, and individualized guidance to entrepreneurs and business owners throughout the region.Kinsman brings a unique perspective to the director’s role as both a local business owner, operating in downtown Southern Pines, and a former Moore County educator. “Her combination of education, business ownership, leadership, and community involvement make her a great fit for the Small Business Center and the work we are continuing to build across Moore and Hoke counties,” said Taylor L. McCaskill, senior director of Workforce Development & Corporate Partnerships in a press release.Kinsman is an active member of the Southern Pines Business Association and has been connected to the Sandhills Small Business Center since the beginning of her entrepreneurial journey. She looks forward to building on that experience by strengthening the Center’s partnerships and expanding its connections throughout the community.She will lead the Center's efforts to support entrepreneurs and business owners throughout Moore and Hoke County and be the connector to the North Carolina Community College System Small Business Center Network operations. The Center offers no-cost, confidential one-on-one counseling, practical workshops, and connections to the resources and partners that help local businesses start, grow, and create jobs.A key part of this new approach, only offered at SCC, is a network of Senior Business Advisors, experienced professionals who will provide individualized guidance in areas such as business planning, finance, marketing, operations, growth strategy, and problem-solving. These advisors will serve as trusted partners to entrepreneurs and business owners, helping them turn ideas into action, overcome barriers, strengthen existing businesses, and pursue new opportunities. This one-on-one counseling is available at no cost, ensuring that high-quality business support is accessible to entrepreneurs at every stage.Senior Business Advisor for Hoke County, Kenna Parks. Photo provided by: SCCKenna Parks has been named the senior business advisor for Hoke County. She is a business professional, entrepreneur, and educator who brings a unique combination of academic training and real-world business experience. She earned her Master of Business Administration (MBA) in 2017 and has built her career around entrepreneurship, marketing, business development, and helping others turn ideas into sustainable opportunities.Senior Business Advisor for Moore County, Katrin Henderson. Photo provided by: SCCAs a military spouse, she has successfully launched and operated businesses across five states, giving her firsthand experience in adapting to diverse markets, building new customer bases and understanding the importance of global reach in today’s business environment. Over the last decade, her areas of focus include business planning, marketing strategy, branding, customer development, financial preparedness, operational planning and connecting entrepreneurs with educational programs and community resources.Parks brings an especially valuable perspective to business advising because she is an entrepreneur herself. She is the owner of Glamo Society Bridal & Formal Wear in Raeford, N.C., giving her firsthand experience with the realities of launching, operating, marketing and growing a small business. She understands that entrepreneurship extends far beyond developing a great idea; it requires strategy, financial awareness, adaptability, strong customer relationships, and consistent execution.Katrin Henderson will serve as the senior business advisor for Moore County. Thriving in hospitality and retail, Henderson has enjoyed positions in Food & Beverage Management and Retail Management in various fine dining and retail establishments in the area, before opening her own children's shop in 2015, in the Village of Pinehurst. She is a native of Moore County.Quickly immersing herself in this new world of small business ownership, Henderson joined various boards and committees, including President Elect of Pinehurst Business Partners and Event Chair for the Holly Arts & Crafts Festival. She also partnered with local organizations such as Moore County Economic Development and Moore County Chamber of Commerce and Sandhills Community College Small Business Center in events and educational opportunities. In 2026, Henderson sold her shop and now offers full-time support to both new and seasoned entrepreneurs through freelance consulting mentorship and the SCC Small Business Center program.The Small Business Center team is passionate about making business resources more accessible, and ensuring entrepreneurs know they do not have to navigate business ownership alone. Through their work with SCC, they are committed to building meaningful relationships with local businesses, community organizations, and industry partners while helping entrepreneurs move from idea to strategy, strategy to action, and action to sustainable growth.“Sandhills Community College believes deeply in the power of small business and entrepreneurship because strong local businesses create jobs, spark innovation, generate investment, and strengthen the communities we serve,” said McCaskill in press release. “Through this new Small Business Center model, Sandhills is building a stronger ecosystem where entrepreneurs can connect, grow, and thrive, while helping drive long-term economic vitality throughout our region.”To learn more about the Center's services or to schedule a consultation, please contact Kinsman directly at kinsmanl@sandhills.edu or 910-695-3938.
With $20M gift, Dartmouth Health to launch institute and at-home primary care program
Richard Levy donated $20 million to Dartmouth Health and the Geisel School of Medicine at Dartmouth for the establishment of at-home primary care and palliative services and a Family Caregiver Institute to offer resources and train new members of the caregiver force.
DOJ ramps up fight against federal judges after some in Minnesota speak to media about immigration surge cases
The Justice Department is filing a judicial misconduct complaint against nearly all the federal judges in Minnesota, Attorney General Todd Blanche announced Wednesday, in an escalation in tensions between the Trump administration and the judicial branch, which came to a head during the winter surge of immigration enforcement.
Oklahoma officials highlight rural health program’s first-year progress
Oklahoma is expanding rural healthcare access through new funding for workforce development, technology and medical services.
Selling AI insurance was hard enough. Then they got into the cafe business
Corgi, valued at more than $5 billion, was forced to rein in its real estate expansion plans this month after a series of mishaps including a citation for rodents and departure of key dealmakers.
Petition challenges Hyannis' $5 million Great Streets project as work is set to begin
Opponents are gathering signatures to force review of Hyannis traffic changes before the town's Great Streets project moves ahead.
Beale Street businesses ride out Memphis law enforcement surge
A year after a coalition of law enforcement agencies converged on Memphis, Beale Street businesses are struggling to stay afloat.
'Revolutionary scenario' - German women's Bundesliga mulls play-offs
The German women's Bundesliga is considering introducing play-offs for the championship, promotion and relegation after launching the sale of media rights for the first time since announcing a split from the German Football Federation. The split will fully come into force at the start of next season and the Bundesliga has issued TV rights tenders including a "revolutionary scenario" featuring play-off games for the first time.
Animal Science Program to develop workforce for animal-related industries and livestock production
University launches Animal Science degree to support Nevada's livestock and agricultural industries
Japan can lead the world in making preventive health pay
This op-ed argues that Japan, as the world's first super-aging society, can set a global standard for how prevention protects health, workers, and prosperity. Preventive health must be treated as core economic infrastructure for sustaining workforce participation and fiscal stability.
Hampton Roads workforce and entrepreneur development
The Apprentice School at Newport News Shipbuilding Founded in 1919, The Apprentice School in Newport News has graduated more than 11,000 apprentices over
GO TEC survives funding shortfall
Go TEC, a Virginia vocational education program, survives after losing state funding, relying on other sources to sustain and expand its workforce pipeline.
Luka Doncic Offers Massive Compliment To Stephen Curry
The questions on NBA media day often force superstars to show respect to others around the league. Luka Doncic received a question at the Los Angeles Lakers media day event about the toughest players to guard in the league. The Lakers superstar wasted no time and had Stephen Curry ready as his answer before the […] The post Luka Doncic Offers Massive Compliment To Stephen Curry appeared first on HEAVY.
6 years later, the office is making a comeback
Six years after COVID-19 transformed the way Americans work, the pendulum is swinging back toward the office. The pandemic forced companies to send employees home almost overnight, transforming remote work
Air Force Major Recommended for General Court-Martial After Protesting Trump
The recommendations are not binding, but it is rare for them to be ignored in the military justice system.
Jennifer Lawrence teaming up with ‘Weapons’ director Zach Cregger for sci-fi thriller ‘The Flood’
Jennifer Lawrence is joining forces with ‘Weapons’ filmmaker Zach Cregger for his next movie, the sci-fi thriller ‘The Flood.’
Mamdani releases plan to combat antisemitism in New York amid concerns over his criticism of Israel
The plan is the mayor's most forceful attempt to address concerns from the Jewish community over antisemitism.
Disney cuts hundreds of jobs across multiple departments: report
Disney is laying off hundreds of employees across HR and tech in its latest workforce reduction under new CEO Josh D'Amaro amidst company restructuring.
Board of Health wields unusual power, expert tells members
Marblehead’s Board of Health has powers unlike virtually any other local board or commission in Massachusetts, a public health attorney told members Monday night — including the authority to adopt regulations that carry the force of state law. Michael Hugo of the Massachusetts Association of Health Boards spent more than two hours walking the board
Immigration hawk warns Trump enforcement ‘missteps’ could come with political price
Mark Krikorian says mixed signals risk frustrating the very voters Republicans need to turn out in the midterms as the administration navigates tensions between its base and business interests.
Innovative country experiences show how primary health care can accelerate health system transformation in the Americas
Barbados, Bolivia, the Dominican Republic and Guyana shared experiences on strengthening Primary Health Care through targeted actions in health workforce, services organization and system’s planning during the 63rd PAHO Directing Council.Washington, D.C., 29 September, 2026 (PAHO) – Innovative approaches to transform health systems based on primary health care (PHC) were highlighted today during a briefing session at the 63rd Directing Council of the Pan American Health Organization (PAHO).
Operational Drift is Risky Business for Power Generators
Power generation operators are navigating a major workforce transition at the same time operations and maintenance (O&M) work is becoming more
PAHO and Panamerican Trauma Society join forces to expand care for injured people during emergencies in the Americas
Five-year collaboration will strengthen training and preparedness, expand access to specialized clinical expertise, and promote knowledge exchange to help countries rapidly scale up trauma and emergency care during disasters and other health emergencies.
How Ted Cruz, once a Republican gadfly, became a bipartisan dealmaker
The Texas senator was the driving force behind a bill to overhaul regulation of college athletics that passed the chamber Monday night.
Health tech's dealmaking boom is back as firms chase scale and profitable growth
Health tech and digital health merger and acquisition activity remains a major force in 2026, driven by strategic expansion and the race for competitive artificial intelligence capabilities. | Health tech and digital health M&A activity remains a major force in 2026, driven by strategic expansion and the race for competitive artificial intelligence capabilities.
Heart of a Fighter: A Colonel’s Journey from Silent Heart Attack to Triple Bypass at Broward Health
Dr. Alexander Justicz, Tim Irvin, Dr. Kenneth Herskowitz September 29, 2026- Tim Irvin II, a colonel with the Broward Sheriff’s Office (BSO), doesn’t back down from a challenge, even when it’s literally his heart on the line. Over the course of his more than 30-year career in law enforcement, the 51-year-old husband and father moved […]
Newsom signs bills pushing back on Trump's immigration agenda
The more than 20 bills approved by the governor Tuesday were crafted to thwart tactics used by Immigration and Customs Enforcement agents, while others are meant to boost state oversight of federal detention centers in the state.
Hegseth says NSA, military cyber forces will guard election systems in midterms
But the defense secretary's announcement comes after Trump gutted the civilian agency specifically created to safeguard election infrastructure
Hegseth says NSA, military cyber forces will guard election systems in midterms
But the defense secretary's announcement comes after Trump gutted the civilian agency specifically created to safeguard election infrastructure
Hegseth says NSA, military cyber forces will guard election systems in midterms
But the defense secretary's announcement comes after Trump gutted the civilian agency specifically created to safeguard election infrastructure
Lesbian Bar Project Co-Founder: Purity Politics Could Destroy Our Remaining Spaces
Subscribe As a professional lesbian and Massachusetts native, I’ve recently been asked by a lot of folks what I think about the saga unfolding at Last Ditch. The now-viral story, first reported by The Boston Globe, centers on a Western Massachusetts lesbian bar that lifted its mask requirement for one night a week to help drum up business. The decision ignited an intra-queer controversy that has been feasted on by media outlets across the political spectrum—from the New York Post to LGBTQ Nation—and is even reportedly being eyed for a Hollywood adaptation. Apparently nothing is more entertaining than a bunch of lesbians and queers fighting with each other over KN-95s. What has been lost in all of the chatter and media coverage is the very real possibility that Last Ditch, which just opened in April 2025, will have to close its doors. The venue’s one remaining founder, Jackie Matellian, revealed in a community Zoom meeting that she’s working four jobs, is now solely responsible for the bar’s $50,000 business loan and is struggling to keep up with the bills. So as we laugh about the controversy’s similarity to a “Portlandia” skit and how one of the bar’s founders left to enroll in clown school, we forget that yet another lesbian bar is facing an existential crisis—and this time the call is coming from inside the house. In 2020, my friend Elina Street and I created The Lesbian Bar Project, an Emmy-, Webby- and GLAAD Media Award-winning docuseries and initiative that tells the stories of lesbian queer bars around the world. We were moved to act because at the time there were only an estimated 16 lesbian bars in the United States, and the pandemic threatened to bring that number down even further. There are now more sapphic bars than there were just before the pandemic—about 36 of them in total—but this is down from approximately 200 in 1980. Maybe that doesn’t mean much to you, but for the millions of sapphics living in the U.S., this number is calamitous. As the world laughs at lesbians and sapphics, I want to take a second and tell you what I feel when I walk into one of these bars, which are all unique and irreplaceable in their own way: I feel seen. Sometimes I think Cubbyhole in New York City’s West Village neighborhood knew I was gay before I did. When I walked in there for the first time, before I was even out, I was transfixed by the colorful array of tchotchkes hanging from the ceiling and how the women standing next to me were completely unafraid to express their desire for one another. I knew the minute I was ready to come out, I had a home. I also felt the joy of a new couple falling in love at Seattle’s Wildrose, the quiet confidence of a short king lining up her shot at the pool table at Ginger’s in Brooklyn and the kick of cayenne pepper in Julie Mabry’s crawfish at Houston’s Pearl Bar. Subscribe Lesbian bars don’t just serve lesbians; they serve queer folks across the spectrum, including bisexual, pansexual and trans people. As Elina and I traveled across the U.S. and Europe and to parts of Latin America to document the bar owners, staff and patrons that make up the ecosystems of these spaces, we also became uniquely acquainted with the factors that threaten their existence: gentrification, wage gaps, sexism, environmental disasters, gun violence, rising insurance premiums and political administrations working to annihilate queer people and their families. Lesbian bar owners, like all leaders and entrepreneurs, are imperfect. There have been significant issues over the years at lesbian bars: employee harassment, racism, lack of accessibility, sexual assault and transphobia. All bar owners should be held accountable and should listen to their communities to evolve into safer and more equitable spaces. I also acknowledge my privilege: I am able-bodied, white, cis and from a family system that loves me for who I am. Not everyone has that. Queer people, especially trans and bisexual people, are suffering from disproportionately high levels of depression, and our mental health system isn’t equipped to support them. Immunocompromised people and long COVID are real, and many of my friends are suffering to this day. The people with the least safety net are often the ones for whom a bar closing costs the most. And yet, as we’re seeing with Last Ditch, the queer community often lashes out at each other. It’s also the mainstream media taking the internal conflict and making a mockery out of it, distracting from the real possibility that this bar could close due to financial pressures. A bar that many people loved and needed is facing extinction. Perhaps it’s safer to dissent with one another than with the larger forces trying to eradicate us, but in doing so, we risk destroying the few spaces we have left. Due to the constraints of purity politics—some in good faith, some not so much—lesbian bar owners, almost all of whom are queer women themselves, are forced to be everything for everyone, similarly to how women are forced to be everything for everyone. By asking these bars to uphold impossible standards—standards very few other third spaces are asked to consider—we all end up losing. I want to move as a community toward dialogue, compassionate dissent and collaboration to make our spaces better with the goal of keeping them OPEN and thriving, rather than destroying them from the inside with expectations that are arguably unattainable. Subscribe While I have your attention—for this fleeting second of the news cycle—may I urge us to spearhead a way to keep these small businesses afloat without attacking our own community along the way? Bar owners are left with an impasse: They want to be community-centered, but they also have to make money to keep their doors open. Sometimes they might make business decisions that don’t work for everyone—and that’s partly because different patrons have different priorities and want different things—but these owners deserve the opportunity for productive dialogue**.** We have to work with them and with each other to keep our spaces open, to keep them growing. Lesbian bars raised me into the queer woman I am today. One thing I think about as I reflect on the six years of work we’ve done to document these spaces is that shared, unspoken language I have with a stranger the moment we both walk into one of these bars: the nod, the ease, the not having to explain ourselves. I don’t want to lose that, and neither should you. If objective, nonpartisan, rigorous, LGBTQ-focused journalism is important to you, please consider making a tax-deductible donation through our 501(c)(3) fiscal sponsor, Resource Impact, by clicking this button: Donate
Rural Colorado communities getting healthcare upgrades with $170M in federal grants
Grant funding will benefit 250 projects aimed at strengthening rural Colorado’s healthcare workforce, equipment and services
A majority of Oklahoma's behavioral healthcare workforce is part-time, analysis says
Oklahomans seeking mental healthcare may struggle to locate a provider. Finding someone available to see clients full-time is even harder.
Draymond Green Says Luka Doncic & Lakers Hurt LeBron James
The Los Angeles Lakers are still forced to witness the loss of LeBron James remaining a huge talking point. Any NBA team losing an iconic figure will see this level of attention, and it is far bigger than the Lakers. Draymond Green decided to bring this back into the news by addressing something head coach […] The post Draymond Green Says Luka Doncic & Lakers Hurt LeBron James appeared first on HEAVY.
Pensacola pediatrician appointed to federal health task force
Dr. Patrick Hunter was named to the U.S. Preventive Services Task, which is tasked with improving the health of Americans through evidence-based recommendations about preventive services.
DEA Highlights the Integral Role of Forensic Science in Addressing the Synthetic Drug Crisis
As synthetic drugs continue to evolve and threaten American lives, DEA chemists and forensic science professionals play an essential role in helping the U.S. Drug Enforcement Administration identify emerging threats, connect evidence to investigations, and provide timely information that can save lives. From analyzing suspected fentanyl and other novel synthetic drugs to examining fingerprints and…
Jalen Hurts forced to undergo concussion evaluation
The Eagles quarterback had to leave Monday night’s game after taking a late hit in the second quarter.
Nancy Guthrie investigators reviewing possible new ransom note
Nearly eight months into Nancy Guthrie's alleged kidnapping case, law enforcement is assessing the credibility of an alleged new ransom note.
American Infrastructure Alliance Launches First Nationwide Partnership Between Labor & Business to Advance Responsible Data Center Infrastructure Growth
The American Infrastructure Alliance (AIA) today launched the first nationwide coalition of labor and business focused on establishing responsible, enforceable guardrails for data center development at the state and local level.
How the phrase 'Lower 48' became a fixture in Alaska's high-stakes Senate race
The most biting insult in Alaska politics is to be accused of being aligned with the “Lower 48." That's code for candidates taking marching orders from powerful forces in the contiguous United States rather than sticking up for Alaskans.
‘Santa Clarita Karen’ forced to apologize as her business implodes after vicious street vendor war
State awards nearly $170 million to rural healthcare providers
Colorado is awarding nearly $170 million in federal grants to rural healthcare providers across 52 counties to expand telehealth, strengthen the workforce and improve access to care.
Fun Spot America has many items up for auction. Here's what you could buy
Fun Spot America Atlanta is auctioning bumper cars, arcade games and other rides after the Fayetteville park permanently closed in July.
One of Kash Patel’s deputies resigns from the FBI
Andrew Bailey, a senior FBI official and former Republican politician, told the agency’s workforce early Monday that he is resigning to spend more time with his family, according to two sources familiar with this departure.
Kazakhstan nuclear scientists showcase industry potential and workforce capabilities
Scientists and industry experts highlighted Kazakhstan's scientific, technological, and human resource potential in the nuclear sector during the international conference “Atom of the Future,” Qazinform News Agency reports.
NinjaTech AI Launches Enterprise AI Workforce Platform Using Open-Weight Models
Built to end runaway per-token AI costs, the platform deploys into the customer’s own cloud and data centers, so data never leaves their control PALO ALTO, Calif., Sept. 28, 2026 — NinjaTech AI today launched SuperNinja Enterprise, an AI workforce platform that puts AI employees to work around the clock inside the customer’s own cloud, on […]
Axios Live: Utah's health worker shortage is more than a numbers problem
Utah's health care workforce shortage reflects gaps in pay, clinical training and access to career pathways
Jackson says Trump ‘owns’ Collins
Specifically, Jackson mentioned Collins’ vote to let the “big, beautiful bill” advance to the Senate floor, her support for $70 billion in funding for Immigration and Customs Enforcement and the war in Iran.
ONE WEEK AWAY: Protect Our Care’s “Sick of It! Fix Health Care Now” Bus Tour Hits the Road to Take the Fight for Affordable Health Care Across the Country
Washington, D.C. — One week from today, Protect Our Care’s “Sick of It! Fix Health Care Now” campaign will hit the road with Care Force One, kicking off in Bangor,...
Alessio Milivojevic Remains Spartans QB, but Patience Is Growing Thin
Freshman promise has vanished behind a crumbling offensive line as Milivojevic’s turnover-prone struggles force Michigan State to decide if their struggling starter can still salvage the season.
Business Monday: Natural disasters devastated some Big Island business, while boosting income for others
Hawai‘i County Mayor Kimo Alameda said it’s an “unbelievable yin-yang story” as some businesses have been forced to shutter while others are thriving.
New task force aims to expand employee ownership to Vt. businesses and workers
MONTPELIER — Vermont Treasurer Mike Pieciak will convene a task force ahead of the legislative session to explore ways the state can expand employee ownership to local businesses and their
DR Congo Ebola emergency: Calls grow for urgent humanitarian access
Aid teams trying to keep deadly Ebola disease from spreading in the Democratic Republic of the Congo (DRC) are increasingly concerned about ongoing fighting and violence that has forced thousands of people to flee a displacement camp in the vast, resource-rich east of the country.
Bret Bielema Shows Urgency With Bobby Hauck Decision
Dismal defensive rankings forced an abrupt mid-season firing, proving the Illini head coach values immediate results over pride as he fights to save a crumbling season.
Trump and Xi's 'stalemate' summit was a glitzy gift to China
The limited outcomes reinforced a view that Xi sees little reason to grant Trump major political victories ahead of November's midterm elections.
Bellamy sure Wales belong as Haaland threat looms
Craig Bellamy expects Norway to be a force for years, but insists Wales have earned the right to be in Nations League A.
Jiayuan Science and Technology Banned From Cyberspace Force Procurement For 3 Years
Jiayuan Science and Technology Co Ltd SZSE:301117:
Jess McKenna and Zach Reino are a force to be toured with
Known for their work on an improvised musical podcast and Dropout TV, this duo brings “Off Book” to the Barrymore in Madison on Oct. 17.
Salesforce and Innovation City Launch AI-Powered Business Registration Platform
The new implementation combines AI platform capabilities powered by Salesforce with Innovation City's digital ecosystem, enabling businesses to access services and complete registration processes faster through more responsive interactions, while operating within Innovation City’s established governance and regulatory framework.
The Healthcare Workforce Gap Is Set to Nearly Double by 2040
CHICAGO--(BUSINESS WIRE)--Sep 28, 2026--
Under Trump, Commodity Futures Trading Commission Scales Back Enforcement, Worrying Farmers
The fate of two cotton brokers highlights how the Commodity Futures Trading Commission has scaled back its regulatory actions not just for crypto cases but also for the kinds of cases it has long policed.
ICE enforcement around healthcare facilities in Pa. leads to fears for immigrants of seeking care
Advocates warn that as word of raids near hospitals and medical centers spreads, so can fears of seeking healthcare services in immigrant communities. Medical workers too have warned that more aggressive immigration enforcement has led to immigrants delaying or refusing necessary care.
Dortmund defender picks up injury on international duty
Borussia Dortmund are sweating over the fitness of Julian Ryerson after the 28-year-old was forced off while on international duty with Norway.Ryerson was substituted after 66 minutes of his country��...
After five years of war, how do Ukrainian small businesses survive?
In this interview, writer and journalist Victoria Belim-Frolova shares her observations about Russia’s war on Ukraine and how it forces “a constant process of adaptation,” especially in women-led small businesses.
Chaplains and Commissars: An Analysis of the People's Liberation Army’s Political Work System and the Will to Fight
In future conflicts, Western forces can reduce the PLA’s will to fight by undermining belief in the chain of command and CCP more broadly.
Navigating the American Dream: How Integrated Financial Tools, Credit and Rewards Can Help Small Businesses Succeed
(Feature Impact) Owning a small business has been a cornerstone of the “American Dream” for generations. It represents the chance to transform a passion into a livelihood and legacy. However, turning dreams into reality is rarely a smooth or easy process and requires more than ambition alone. Today’s business owners need support and access to tools that enable them to overcome challenges and keep growing.#placement_678081_0_i{width:100%;margin:0 auto;}var rnd = window.rnd || Math.floor(Math.random()*10e6);var pid678081 = window.pid678081 || rnd;var plc678081 = window.plc678081 || 0;var abkw = window.abkw || '';var absrc = 'https://ads.empowerlocal.co/adserve/;ID=181918;size=0x0;setID=678081;type=js;sw='+screen.width+';sh='+screen.height+';spr='+window.devicePixelRatio+';kw='+abkw+';pid='+pid678081+';place='+(plc678081++)+';rnd='+rnd+';click=CLICK_MACRO_PLACEHOLDER';var _absrc = absrc.split("type=js"); absrc = _absrc[0] + 'type=js;referrer=' + encodeURIComponent(document.location.href) + _absrc[1];document.write('');Recent research conducted by the Capital One Insights Center shows 75% of more than 1,000 surveyed small business owners with more than one employee and annual revenues of up to $20 million are confident about the future, and 69% believe their business is actively primed for growth.While this optimism is promising, 47% of business owners still said their operations either stayed the same or became less efficient over the past year, citing issues like back-office friction and fragmented financial systems that make it difficult to get a clear picture of the health of their businesses.If you’re a small business owner eager to grow but not sure how to get there, start with this advice from real small business owners and experts at Capital One.Identify Sources of FrictionBefore you can pour effort into growth, you must understand what barriers are holding you back. Take time to look under the hood of your business to identify where time and energy is being lost.For example, you may be among the 78% of small business owners who feel stressed and uncertain about expense management – think hours spent hunting for receipts, manually entering numbers into software and reconciling accounts. Operational challenges aren’t just a hassle; they also pull attention away from important priorities like serving your customers and planning for growth. “We were focused on making as many candles as possible, especially during the busy season,” said Katie Roering, co-owner of Fontana Candle Co. “A lot of the back-office tasks like procurement, raw material purchasing, forecasting – all the really important things – were done at 3 a.m., 8 p.m. or on Saturday and Sunday, and there really just was not enough time in the day to get everything done that we needed to. We just knew as we continued to grow, we needed to streamline our processes, build out our team and keep moving forward.”Use Integrated Tools to Manage FinancesInstead of balancing 10 different tracking and analysis tools, you can turn to one-stop solutions to improve efficiency. Time gets lost when you’re forced to manually gather and interpret relevant data before you’re able to act. You need a platform that handles the busywork for you.Integrated, or “all-in-one,” financial tools – like accounting and bookkeeping platforms with automation capabilities or business credit cards featuring built-in analytical tools – allow you to easily stay on top of cash flow and day-to-day operations. For small businesses where every hour and dollar makes a difference, consolidating and automating systems can have an immediate impact. In fact, 51% of survey respondents said integrated tools have already fueled their growth.Leverage Credit Access and Rewards WiselyGrowth requires capital, so access to credit is a game-changer for many business owners, with 77% describing it as a key factor in achieving business resilience. Having funds accessible when you need them makes your business more capable of weathering storms such as equipment failures and seasonal slowdowns. It also puts the power in your hands to act when an exciting opportunity presents itself, like an inventory flash sale or the chance to advertise in a new market.Access to credit comes with another advantage: rewards. By using credit cards for your daily business expenses, you can earn cash back, points or travel rewards. Whether you redeem these to cover everyday expenses, book business trips or reinvest in the business, they can act as a bonus source of income. Learn to maximize rewards like the 84% of small business cardholders surveyed so you aren’t leaving money on the table.To learn more about how small business owners can identify obstacles, employ integrated financial tools and use credit as a tool for growth, read the full report at capitalone.com/about/insights-center.Photos courtesy of Shutterstock
Justin Herbert Gives Vague Answer to Crucial Chargers Question
The Los Angeles Chargers somehow lost Sunday in Buffalo even after the defense forced five Bills turnovers. Justin Herbert and the offense managed a total of 16 points on a day when Josh Allen had zero touchdown passes and two interceptions.This drops the Chargers to 0-3 on the season with very little hope of a […] The post Justin Herbert Gives Vague Answer to Crucial Chargers Question appeared first on HEAVY.
Todd Blanche backs decision to block CNN from Air Force One
"This wasn't a one-time denial of CNN," Blanche told "This Week." "There's all kinds of times when certain reporters are not flying or are flying."
WHO recognizes healthy, innovative cities across the Western Pacific Region
Nine Healthy City champions from across the World Health Organization (WHO) Western Pacific Region received special recognition at an awarding ceremony during the 11th Global Conference of the Alliance for Healthy Cities in Sydney, Australia.The WHO Regional Office for the Western Pacific has presented the Healthy Cities Recognition Awards every two years since 2004 to celebrate innovative and impactful city-led initiatives that improve the health and well-being of urban populations.Eight cities received awards for their best practices, and one National Forum received the WHO Regional Director’s Special Award in recognition of its long-standing leadership in advancing the Healthy Cities movement.Awardees were selected through a rigorous evaluation process and recognized for demonstrating measurable, innovative and sustainable approaches to health challenges faced by cities.Remarking on the significance of the awards, Dr Huong Tran, Director of the Division of Health Promotion, Disease Prevention and Control at the Regional Office, said that, “There is no single blueprint for a healthy city. What works in one context may need to be adapted to another. But by sharing our experiences, including what worked, what was challenging, and what we learnt along the way, we can help one another move faster and further.”Award-winning cities and initiativesThis year's awards recognize outstanding city-led initiatives that have demonstrated measurable impact, innovation and sustainability in advancing health initiatives for urban populations.Baguio City (Philippines) – Data for equity: informing action, improving healthDr Donnabel Tubera-Panes, City Epidemiologist – Medical Officer IV of the Health Services Office accepted the award on behalf of Baguio City. Photo credit: Maria BoyadgisBaguio City was recognized for developing a pioneering Livability Index that provides village-level data across all 128 barangays (villages), enabling evidence-based planning and more equitable allocation of resources. By integrating community participation and institutionalizing the index within city planning and budgeting processes, the city has demonstrated how data can drive action to reduce health and social inequities.Eunpyeong-gu (Seoul, Republic of Korea) – Communities living in vulnerable situations: advancing health equity through community engagementVice Mayor Honourable Ahn Hyoung Jun accepted the award on behalf of Eunpyeong-gu. Photo credit: Maria BoyadgisEunpyeong-gu was recognized for its inclusive health equity programme supporting vulnerable populations, including isolated older adults and LGBTQI+ communities. Through peer-led community networks, social cooperatives and inclusive service design, the district has strengthened access to care, promoted social inclusion and advanced community ownership of health initiatives.Madiun City (Indonesia) – Adapting and mitigating climate-related crises: building heat resilience and preventing flood-related health risksMs Yuni Dwi Purwani, Secretary General of the National Forum for Indonesian Healthy Cities/Regencies, accepted the award on behalf of Madiun City. Photo credit: Maria BoyadgisMadiun City was recognized for its SUPERMIE (Sustainable Public Environmental Management Initiative) – a community-based environmental governance model that addresses urban flooding, climate resilience and environmental sustainability. The initiative contributed to reductions in flood-prone areas, greenhouse gas emissions, diarrhoeal disease and dengue fever, while at the same time improving food security through neighbourhood food gardens. The programme has already been replicated in 15 cities and regencies across Indonesia.Macao Special Administrative Region (China) – Protecting communities from tobacco and alcohol-related harms: tackling commercial drivers of riskDr LO Iek Long, Director of the Health Bureau, Macao SAR, China accepted the award on behalf of Macao. Photo credit: Maria BoyadgisMacao SAR was recognized for implementing a comprehensive and integrated approach to tobacco and alcohol control. Through legislation, monitoring systems, enforcement, public awareness campaigns and multisectoral partnerships, the programme has strengthened protection against major risk factors for noncommunicable diseases and established a model that is highly transferable to other urban settings.Phnom Penh Capital City (Cambodia) – Safe, active and health-enabling transport: advancing health and reducing inequities in urban mobilityH.E. Khoung Sreng, Governor of Phnom Penh Capital City accepted the award on behalf of Phnom Penh Capital City. Photo credit: Maria BoyadgisPhnom Penh received the award for its Safe School Zone Project, which combines infrastructure improvements, speed management, enforcement, education and stakeholder engagement to protect children and communities. The initiative has demonstrated measurable reductions in crashes and vehicle speeds while providing a scalable model for safer urban mobility across the country.Quezon City (Philippines) – Transforming food environments: addressing policy, market and urban design drivers of health and nutritionMs Jirah Asa M. Sideco, Chief of the Nutrition Section of the Quezon City Health Department accepted the award on behalf of Quezon City. Photo credit: Maria BoyadgisQuezon City was recognized for its public food procurement policy that promotes healthier diets through government-run institutions and feeding programmes. Supported by strong policy frameworks and monitoring systems, the initiative improves access to nutritious food for vulnerable populations while serving as a benchmark for other local governments.Samarinda City (Indonesia) – Preventing violence and promoting gender equality: transforming urban systems, norms and spaces Mrs Rinda Wahyuni, Chairperson of Samarinda Healthy City Forum accepted the award on behalf of Samarinda City. Photo credit: Maria BoyadgisSamarinda City was recognized for its multisectoral approach to preventing violence and advancing gender equality. Responding to local evidence on violence against women and children, the city has positioned violence prevention as a public health priority, bringing together health services, schools, social welfare institutions, law enforcement, civil society and community leaders to strengthen prevention, reporting, survivor-centred support and legal protection. Through inclusive policies, community engagement and sustainable city financing, Samarinda has developed a locally owned and scalable model for creating safer, more equitable and inclusive urban communities.Singapore – Age-friendly cities: transforming systems to bridge generations for a healthier tomorrowDr Tan Weng Mooi, Director, Integrated Health Promotion, accepted the award on behalf of Singapore. Photo credit: Maria BoyadgisSingapore received recognition for its Healthy Precinct Framework, which translates national healthy ageing priorities into neighbourhood-level action. The initiative integrates preventive care, social support, service coordination and age-friendly environments while actively engaging older persons, caregivers and community organizations. Its expansion across multiple precincts demonstrates its scalability and long-term sustainability.WHO Regional Director’s Special AwardNational Forum for Indonesian Healthy Cities/Regencies (Indonesia)Ms Yuni Dwi Purwani, Secretary General of the National Forum for Indonesian Healthy Cities/Regencies, accepted the award on behalf of the National Forum. Photo credit: Maria BoyadgisThe WHO Regional Director's Special Award was presented to the National Forum for Indonesian Healthy Cities/Regencies (FKKSI) in recognition of its long-standing leadership in advancing the Healthy Cities movement across Indonesia. As a national platform bringing together local governments, communities, academia and civil society, FKKSI has played a critical role in promoting collaboration, capacity-building, knowledge exchange and advocacy. Its efforts have strengthened and institutionalized healthy urban development nationwide and established a model for multisectoral engagement in the Region. Healthy Cities for allThe 2026 Healthy Cities Recognition Awards highlight how cities can lead transformative action on health by addressing climate change, inequity, ageing, nutrition, mobility, social inclusion, violence prevention and the commercial determinants of health. The recognized initiatives demonstrate that local governments, communities and partners can work together to create healthier, safer and more resilient urban environments for everyone. As urban populations continue to grow across the Western Pacific Region, WHO remains committed to supporting cities in advancing health, equity and sustainable development through the Healthy Cities approach and the Alliance for Healthy Cities. ###Note to editorsSince 2004, the WHO Healthy Cities Recognition Awards have provided a platform for cities to share innovative and effective approaches to improving health and well-being. The awards recognize achievements in areas including climate resilience, healthy ageing, health equity, gender equality, tobacco and alcohol control, urban mobility, nutrition and data-driven governance. In 2026, more than 150 submissions were received from cities and local governments across the Western Pacific Region. The titles and affiliations of awardees are presented as they were at the time the photo was taken.______________For more information, or to arrange media interviews, contact: WHO Regional Office for the Western Pacific: wprocom@who.int
HSBC Private Bank's CEO In Optimistic Mood Over Business Growth, Strategy
The volatile market environment and changes wrought by AI and other forces aren't distractions but opportunities for private bankers to demonstrate their value. That's the stance of the HSBC Private Bank chief executive who was appointed at the start of this year.
Webb County commissioners to consider rural healthcare access, constable gear and arena zone
Webb County commissioners are scheduled to meet Monday morning to discuss agenda items addressing healthcare access, law enforcement equipment, and regional economic development.
Aleksandar Vucic: from Milosevic minister to long-serving Serbian statesman
The dominant force in Serbian politics for over 14 years, Aleksandar Vucic climbed from the wreckage of strongman Slobodan Milosevic's cabinet to the centre of power using his brand of populist nation...
White House Claim of Finding $250 Billion in Fraud Uses Questionable Numbers
The ledger used by a task force created by President Trump is difficult to verify and includes cases that were identified and went to trial during the Biden administration.
Thunderbirds visit Monterey mental health facility to inspire youth
A U.S. Air Force Thunderbirds pilot and team members visited Ohana, a mental health facility in California, to share messages of teamwork, perseverance, and hope with young patients.
Business Education Council builds Wyoming County workforce
For businesses across Wyoming County, one question matters more every year: Where will our next generation of employees come from?
Alabama teens getting their own version of TikTok under sweeping $100M deal
TikTok must disable its "For You" page for minors and enforce two-hour daily screen time limits under a landmark $100 million Alabama settlement.
Union: CDC Lost a Third of Its Workforce In One Year
Under Trump 2.0, the country's premier public health agency has been "zombified."
Trump Again Rants About Press After Barring CNN From Air Force One: 'These Are Sick People'
President Trump again raged against press coverage after barring CNN from Air Force One: "It is amazing that I have succeeded so long."
CNN says it was left off Air Force One for Trump's trip to college football game
CNN reported it had been scheduled to fly aboard the president’s plane Saturday for a scheduled visit to a midday game between the University of Tennessee in Knoxville and the University of Texas.
CNN says it was left off Air Force One for Trump's Saturday trip to a college football game
CNN, a member of the U.S. network video pool that rotates duties shooting and sharing video coverage of the president, reported it had been scheduled to fly aboard the president’s plane Saturday for a scheduled visit to a college football game.
RTX 5080 and RX 7900 XTX showed almost identical FPS in Ace Combat 8 in 4K
We have carried out detailed benchmarking of the latest NVIDIA GeForce RTX series graphics accelerators and AMD Radeon RX in the flight simulator Ace Combat...
Star Wars: The Force Awakens — Science Lessons vs. Story Rules
Special effects are not worthless but they are second-tier when it comes to storytelling.
Political Pulse: Rep. Steve Duffy campaigns on Rapid City workforce development and retention in District 32
GOP incumbent Rep. Steve Duffy shares why workforce housing, keeping young families in Rapid City, and smart growth are central to his District 32 reelection bid.
White House blocks CNN from covering Trump’s Tennessee trip
CNN had been scheduled to fly with Trump on Air Force One on Saturday as part of its pool duties covering the president.
Intel Panther Lake Teardown, 18A, BSPD, GAAFET, SemiAnalysis STEEL
Panther Lake debuts the first commercial implementation of backside power delivery (BSPDN), introduces Intel’s first iteration of gate-all-around (GAA) transistors, and showcases their advanced packaging capabilities with its Foveros-S assembly. With Panther Lake, Intel’s manufacturing arc has shifted from nebulous roadmaps to shipped silicon, a significant milestone on their long road back to competitive semiconductor manufacturing. To evaluate the extent of Intel’s comeback, we tore down Panther Lake. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Our teardown traces 18A from its four-sheet RibbonFETs (Intel’s marketing name for GAAFETs) and gate stacks through contacts, frontside and backside wiring, and the bonded carrier. We explain how these material and integration choices improve gate control and reduce resistance, while adding capacitance, thermal resistance, and process complexity. Our measurements put Panther Lake’s 18A compute logic and TSMC N3E GPU logic at similar logic density. However, 18A does not lead TSMC N3P, N2 or Samsung SF2 in peak density. Panther Lake’s CPU cores are incremental updates, and the high-end GPU still uses TSMC N3E. Panther Lake assembles one compute tile, one GPU tile, and one I/O tile atop a passive base tile using Intel’s Foveros-S advanced packaging. Both compute tile variants use Intel 18A. The Xe3 GPU options are a 4-core GT1 tile on Intel 3 and a larger 12-core GT2 tile on TSMC N3E. Both I/O tile variants use TSMC N6. [1], [2] Our analysis centers on the PTL-U compute tile, both the 4-core and 12-core GPU tiles, as well as the 12-lane I/O tile. In conventional chips, power and signal are routed through the same frontside metal stack towards the device frontend. Power rails consume scarce routing resources near the transistors, while tall via stacks carry VDD and VSS from the coarse upper wires to local rails. Backside power delivery (BSPD) moves the main power network behind the transistor layer, to the backside, separating it from frontside signal routing. We covered BSPD and its impacts in 2024. [3], [4], [5] Intel’s BSPD implementation, branded as “PowerVia”, routes power through dedicated backside metals to nano-TSVs, which connect those rails to local source/drain (S/D) contacts. Implementing that separation requires Intel to build the interconnect stacks from both sides of the wafer. The frontside comprises the M0-M14 signal stack, while the backside comprises the BM0-BM5 power stack. M0 and BM0 are closest to the transistors. The nano-TSVs connect the two sides, but Intel patterns and etches each via from the front after forming the contacts. A narrow via runs from the side of the contact deep into the silicon substrate. Intel then completes the frontside signal metal stack, bonds the wafer to a carrier, flips it and removes the original substrate until the buried via tips are exposed. The backside metal stack is then deposited directly on the revealed vias. The nano-TSV and backside-via profiles taper in opposite directions because Intel forms them from opposite sides of the wafer. The transistor structures form the FEOL. Local contacts and nano-TSVs connect them to the wiring. M0 begins the frontside interconnect stack. The silicon carrier remains attached above the frontside interconnects. It supports the device wafer during substrate removal and backside processing and remains part of the finished chip’s thermal path. PowerVia removes the main power distribution from the congested frontside metals, routing supply through shorter and wider backside wires. Its lateral landing still occupies area in the standard cell, so it recovers less cell area than a direct backside contact. [3] Nano-TSVs beside the logic devices carry VDD or VSS from the backside power network, while signal connections continue upward through the frontside metals. Backside Interconnects Samsung SF2 data is included for comparison to Panther Lake’s within this article. SF2 is the incumbent GAA foundry node but lacks BSPD, serving as a useful reference to evaluate 18A. A full teardown of Samsung’s S26 products, processed on SF2, will be shared soon.Nanosheet-cut EDS comparison. The PowerVia supply path runs from the backside Cu rails through Mo-lined W nano-TSVs to the local transistor contacts. In this cross section, the tapered connection spans roughly 150 nm from the contact level to BM0. The Ta liner confines Cu and promotes adhesion to the surrounding stack; the AlOₓ etch stop controls the next dielectric etch above the rail. Dielectric beneath the ribbons electrically separates the devices from the backside wiring and removes the conducting silicon body below the channel. [6] AlOₓ serves as an etchstop (ES), enabling endpointing and protecting the underlying layers. Low-volatility aluminum fluoride reaction products resist the fluorinated plasma, allowing a thin AlOₓ film to protect the metal while the surrounding low-k dielectric is removed. [6], [7]. While the BM0 and layers above the M1 lines show double AlOx layers, Our SMIC N+3 teardown showed single AlOₓ layers. SMIC uses a simpler local AlOₓ substack, while the remaining cap and etch sequence provide the required landing protection. So why double layers? The closely spaced AlOₓ doublets provide two protected endpoints in the etch sequence. Intel documents an AlOₓ/SiN/AlOₓ stack that explains the benefit. The main dielectric plasma etch stops on the first AlOₓ film; a selective wet clear opens that film; a second plasma etch removes the intermediate SiN and stops on the second AlOₓ film. The final wet clear exposes the metal landing surface. SiN is the intermediate dielectric in Intel’s published example. [8] The second stop protects the metal through a cap breakthrough. Wide openings can etch faster than narrow ones, and etch depth varies across the wafer. Metal under an early-clearing opening would otherwise be exposed while other openings still need more etching. Staged protection widens the process window and reduces metal erosion, corrosion and void formation. [8] TSMC documents AlN/AlOₓ/SiOC/AlOₓ above Cu, with AlN blocking Cu diffusion, and a simpler AlN/SiOC/AlOₓ variant that omits one AlOx film. [9] Levels with different opening sizes, aspect ratios, pattern densities and cap materials need different etch margins. A double AlOx stop is useful where another protected endpoint justifies the added processing. The extra film adds formation, selective opening and cleaning steps, plus another set of interfaces to control adhesion, moisture, and stress. These blanket films are opened through the existing via pattern, so each film does not require another lithography mask. AlOₓ adds parasitic capacitance when it replaces lower-k dielectric; two thin AlOₓ films can nevertheless contain less AlOₓ than one thick film. Total thickness, placement, and theintermediate dielectric determine the electrical cost. Deposition chemistry also changes AlOx permittivity and residual hydroxyl content, which can oxidize the underlying metal. [7], [8], [10], [11] The backside stack separates into relatively fine BM0-BM2 wiring near the devices and coarser BM3-BM5 power distribution. The largest pitch increase occurs between BM2 and BM3. BM0’s pitch closely matches the logic-row height, fitting local power delivery to the cell rows. Higher levels aggregate current through larger conductors: routing density becomes less important than low resistance and current capacity as the network approaches the package. This hierarchy provides wide power wiring for the power delivery network without consuming scarce frontside signal-routing resources. [3] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Frontside Interconnects Intel 18A combines Mo-lined W contacts and nano-TSVs with a separate backside Cu power network. Samsung SF2 keeps power on the frontside, using Ti-based contact interfaces and Ta-based barriers and Co liners around Cu wiring. In 18A standard-cell rows, backside power rails supply the devices through nano-TSVs within the cells, freeing frontside routing resources. Samsung’s M0 accommodates both power and signal connections. From the device toward M0, the connection runs through a Ti-based S/D interface, W contact fill, a Mo-lined W via, and the Cu M0 wire. Mo supplies a conductive nucleation and adhesion layer for W, replacing the resistive TiN liner used in conventional W integration. This increases the effective conduction volume within the feature while retaining W fill and its established polishing, cleaning and etching processes. Intel’s Mo/W patent describes this integration tradeoff. The nano-TSV uses the same Mo-lined W construction in the backside supply path. [12] The move from TiN to Mo is an incremental change. While a full Co or Mo fill can also reduce the volume lost to liners in very small features, it requires new integration schemes that increase complexity and risk. Cu remains attractive for wider wires due to its low resistance. As wires and vias shrink, the diffusion barrier consumes an increasing fraction of their cross-section. [12], [12], [14] Intel uses Co/Ru liners at M0-M1, Co at M2-M4, and Nb at M5-M9. The lower-level liners help Cu adhere and reduce void formation during trench fills. Applied Materials’ Endura has new thermal control that facilitate wetting process, so the thin film continuity is good enough that good capillary pressure will drive Cu atoms to the via bottom without voiding. Intel’s choice to use Nb is particularly interesting. Intel’s Nb patent describes a conductive diffusion barrier intended to reduce the barrier’s contribution to resistance relative to conventional Ta-based barriers, particularly at via bottoms where all current crosses the barrier. The patent pairs Nb in coarser levels with the option of lower-cost PVD processing. [15], [16] The upper metal layers support thicker barriers formed through physical vapor deposition (PVD) despite its worse coverage and uniformity. Meanwhile, the lower metal layers require thinner barriers deposited through conformal atomic layer deposition (ALD). Co/Ru adds another material interface and requires controlled deposition and Cu fill. Changing liners and barriers by metal layer allows Intel to optimize interconnect resistance, process complexity, and reliability. [15, 16] RibbonFET, Intel’s name for its gate-all-around FETs (GAAFETs), replaces the FinFET’s vertical fins with four stacked horizontal silicon nanosheets, allowing the gate to surround the channel on every side. The path to GAAFET begins with the planar transistor. A planar MOSFET places the gate above the channel between its source and drain. Pairing an NMOS with a PMOS transistor creates a CMOS inverter, in which the NMOS pulls the output low for a high input, and the PMOS pulls it high for a low input. The gate must retain electrostatic control of the channel to ensure clean switching. As gate lengths shrank, the drain began to compete with the gate for that control, increasing off-state leakage. Electrostatic control was restored through an architectural evolution that raised the channel into a vertical fin and wrapping the gate around three sides. Called “FinFET”, this new architecture packed more effective channel width into a smaller footprint. Further scaling made it harder to maintain both drive current and leakage within smaller cells, and reintroduced the same problems planar MOSFETs faced. Nanosheet GAAFETs close the fourth side by replacing the vertical fin with a stack of horizontal nanosheets, each surrounded by the gate. The tighter electrostatic control suppresses leakage at shorter gate lengths while stacking adds effective channel width within the cell footprint. In a FinFET process, channel width changes in discrete steps as designers must add or remove whole fins. Nanosheet width can instead be adjusted continuously within the process’s design rules. Wider sheets increase drive current, while narrower sheets reduce capacitance at the cost of drive current. Intel 18A uses stacks of four nanosheets each and varies their widths across logic and SRAM. At the process level, adding more sheets to each stack increases effective channel width and drive current, but complicates fabrication. RibbonFET vs MBCFET Samsung began GAAFET production in 2022 with SF3E, following with SF3 and now SF2. Its ‘MBCFET’ provides a useful structural comparison with Intel’s first RibbonFET implementation. [17] STEEL is digging deeper into SF2, used in the Exynos 2600, and TSMC’s GAAFET N2, used in Apple’s A20 Pro, in upcoming newsletter articles. We’re throwing some teasers on X. Let’s compare Samsung SF2’s MBCFET with Intel 18A’s RibbonFET. Subscribe Even to the untrained eye, Intel’s extra nanosheet is obvious. Intel stacks four ribbons to Samsung’s three. Samsung’s sheets are much wider in these fields, so both sheet count and width matter to the available channel perimeter. Sheet width also changes which silicon surfaces carry current. On conventional (001) silicon, wide nanosheets emphasize the broad top and bottom surfaces, favoring electron transport; the larger sidewall contribution in a narrow sheet favors hole transport. Thinner sheets improve gate control but increase confinement and scattering. This makes width and thickness part of the NMOS/PMOS balance, alongside strain and threshold voltage. [18], [19] GAAFET designs like 18A use different work-function-metal (WFM) stacks for NMOS and PMOS. Around each ribbon, a thin SiOx interfacial layer separates the silicon channel from the HfOx high-k dielectric, with La providing dipole tuning and the WFM wrapping the dielectric. NMOS uses a TiAl-based stack, while PMOS uses TiN WFM. W fills the remaining gate trench, providing a lower-resistivity path where the work-function layers are no longer needed. In this field, the PMOS stacks leave room for W between ribbons, while the NMOS stacks occupy more of those gaps. A silicon-based dielectric marks the P/N boundary, allowing the PMOS and NMOS gates, sharing the same gate trench, to be processed sequentially. Fast logic paths, retention circuits, and SRAM need a family of threshold options. Changing threshold without substantially changing device dimensions, capacitance or fabrication complexity is valuable. FinFET processes typically use different work-function-metal stacks. In a four-ribbon GAA stack, the narrow sheet-to-sheet gap limits how much WFM can fit around each channel. La in the gate dielectric creates interfacial dipoles at the SiOx/HfOx boundary, shifting effective work function and tuning threshold voltage. This gives Intel another control alongside its NMOS and PMOS WFM stacks. Low-threshold devices improve critical-path drive; higher thresholds reduce leakage elsewhere. Dipole tuning is especially useful in GAA because it changes threshold without consuming the narrow intersheet gap with thicker WFM. Precise control of La incorporation, diffusion and interface quality has long been a challenge, limiting viability in high volume production but is now seen from every leading-edge foundry. Intel’s patent describes depositing a dipole-forming oxide above HfOx and annealing it toward the interfacial oxide before completing the work-function and fill metals. This separates threshold tuning from the space available for metal. Newer research addresses the thermal cost: imec’s 2026 dipole-middle research inserts the shifter between two HfOx depositions, shortening the diffusion path while protecting SiOx during patterning. [20], [21]Matched-cut EDS, Intel 18A (left) vs. Samsung SF2 (right). Intel retains raised source/drain epi beneath its contacts, while Samsung recesses W deep into the epi to form a V-shaped Ti-lined interface. The deeper contact increases metal-to-semiconductor area and shortens the current path from the lower sheets, reducing contact and spreading resistance. It also removes epi volume and brings the contact etch closer to the channel ends. Retaining more epi preserves the material available for strain transfer, especially from SiGe into PMOS. These geometries balance contact access against stress engineering and etch margin. [22], [23] Samsung stacks three sheets to Intel’s four ribbons, and both processes use sheet width to tune drive strength. In our Samsung cross-sections, widths range roughly from 19 to 30 nm in the NPU rows and 37 to 50 nm in the CU cell. The Samsung nanosheets taper, with the widest sheet at the bottom and the narrowest at the top. Both processes use HfOx gate dielectric and Ti-based work-function stacks, with Al in the NMOS stack. In the Samsung devices shown here, the dielectric and WFM occupy the intersheet gaps, leaving W above the top sheet. Intel’s PMOS stack leaves more room between ribbons, and W fills those gaps while the thicker NMOS stack leaves W mainly in the upper trench. Gate-stack EDS maps. The W between Intel’s PMOS ribbons provides a conductive path close to the lower gates. Where WFM fills the entire gap, the gate still surrounds the channel, but voltage reaches it through the more resistive work-function films. Thinner WFM and dipole tuning preserve room for low-resistivity fill; Mo and Ru are alternative fill metals being developed for further scaling. [24] A masked, sequential WFM flow explains the different gate heights and inter-nanosheet fill. The proposed sequence below shows how separate NMOS and PMOS work-function steps produce that geometry. Enabled by the BSPDN process, Intel replaces the dense-logic silicon subfin with dielectric, removing the parasitic conduction path below the ribbons and reducing substrate-related capacitance. A retained silicon body as in classical, non-SOI, planar and FinFET designs needs junction and punchthrough-stop engineering to suppress leakage. Dielectric isolation makes that leakage less sensitive to the subfin doping profile but adds removal and fill steps. It also weakens the direct thermal path through silicon, making the contacts, metal stacks and package more important for heat extraction. [24], [26] Fluorine is concentrated around selected Intel device structures in the maps. WF6 is a standard precursor for W nucleation and fill, while barrier films protect adjacent dielectrics from fluorine attack. Low-fluorine W processes reduce the residual-F burden. Chloride-based precursors avoid introducing F during W deposition, but require control of chlorine attack, nucleation and fill quality. The integration target is a continuous, low-resistance W path with a thin protective liner and minimal chemical damage to the surrounding stack. [20], [27], [28] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. We measured cell height, gate pitch, metal geometry, and ribbon dimensions at the XTEM sites shown below. The tables group these dimensions by site and device polarity. Our “sheet cuts” cross the silicon channel and show the ribbons end-on. “gate cuts” run along the channel through successive gates. The 18A logic cell dimensions point to a five-track logic library while the N3E and Intel 3 cell dimensions evidence a seven-track logic library. The DDR-PHY uses wider M0 wires and much larger spacing than core logic. That trades routing density for lower wire resistance and weaker coupling between neighboring nets. The geometry suits the current delivery and coupling requirements of analog, clock, and I/O circuitry. PowerVia lets 18A combine a compact cell height with wider M0 geometry by moving the main power rails off the signal-routing tracks. That relaxes local wire scaling while preserving a small cell footprint. Cell height and gate pitch set the geometric density; pin access and routability determine how much of it a real block can use. [29] The biggest takeaway from our gate-pitch measurements is that Intel 18A compute logic and TSMC N3E GPU logic have similar density in the Bohr representative-cell model. The 18A example is 18.6% denser than the Intel 3 GPU example. Gate pitches are nearly identical across the three sites, so cell height drives most of the difference. The Bohr model combines a four-transistor NAND2 spanning three gate pitches and a 32-transistor scan flip-flop (SFF) spanning nineteen pitches, weighting their densities 60:40. The sensitivity column shows how independently changing cell height and gate pitch by ±1 nm changes the result. This compares representative cell geometries; whole-die density also depends on cell mix and placement. The 18A P-core gives M0 substantially more metal cross section than the N3E vector engine. Treating each profile as a trapezoid gives 2.63 times the area per line and 1.84 times the area after normalization by routing pitch. The larger section reduces the geometric contribution to line resistance and lowers current density for a given current. Taller and wider wires also add capacitance, so circuit delay depends on the balance of resistance and capacitance. The DDR-PHY has less metal area per routing width than the 18A core fields, while remaining above N3E. [30] Area = height × (top CD + bottom CD) / 2, including liners. Area/pitch normalizes by routing width. Taper is the symmetric sidewall angle from vertical, with the largest angle belonging to the DDR-PHY. Compute tile The measurements show how ribbon dimensions and gate-stack geometry vary across the compute tile and between NMOS and PMOS to balance channel drive, gate load and the space needed for the dielectric/WFM stack across logic, SRAM and the DDR-PHY. Width mainly changes available channel perimeter; thickness also changes electrostatic control and carrier confinement. Gate-stack thickness then determines the space left for low-resistivity fill P-core and LP E-core logic Both the P-core and LP E-core use multiple nanosheet widths. Widths are measured on high-magnification XTEMs while wider-field images demonstrate additional width choices within the LP E-core. Multiple widths are expected even within an LP E-core. Timing-critical paths, buffers and cells with different fanout need different drive strengths. The lower-magnification fields show this width diversity beyond the sites quantified in the table. L2 and L3 SRAM GAA gives SRAM designers another way to balance the pull-up (PU), pass-gate (PG), and pull-down (PD) transistors. FinFET bitcells set device strength through fin count while GAA adds nanosheet width as a sizing knob. In a 6T SRAM cell, a strong pull-down relative to the pass-gate limits read disturbance, while a strong pass-gate relative to the pull-up improves writability. During a write, the pass-gate and write driver pull the node storing “1” below the inverter trip point. During a read, the pull-down holds the node storing “0” low. Bias, threshold voltage, mismatch and assist circuitry set the remaining margin. FinFET high-current cells commonly use a PU:PG:PD fin-count pattern of 1:2:2, a device-sizing ratio rather than a current ratio. Ribbon width lets Intel balance SRAM strengths without adding whole fins. The L2 cell uses its narrowest ribbons for PU and widest for PD, improving writability and read stability respectively. Intel’s disclosed HCC operates without assist; its denser HDC uses negative-bitline write assist. Pulling the selected bitline briefly below ground increases pass-gate overdrive so it can overpower the pull-up at lower supply voltage. That buys density and low voltage writability at the cost of boosting circuitry, switching energy, and additional voltage stress that must be controlled. [31], [32] Four rectangular ribbons give the perimeter = 8 × (width + thickness), before corner rounding. PG/PU is 1.49 and PD/PG is 1.16. The L3 structures closely resemble L2 in layout and cell height. Fewer L3 nanosheet widths are tabulated because fewer high-magnification images were available. DDR PHY The DDR-PHY trades density for controlled analog behavior and reliable off-chip signaling. It contains drivers, receivers, delay circuits, and calibration logic that set drive strength, sampling time, and voltage margin. Repeated four-sheet devices with similar widths fit the use of regular transistor units for matching and programmable drive. Its wider local wiring provides room for current delivery and separation of sensitive signals, while consuming more area than a dense core-logic grid. The layout serves the memory channel’s electrical requirements as well as digital logic density. [33] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Intel 3 GPU devices Vector engine logic Intel 3’s XVE logic uses two-fin PMOS and NMOS devices with power rails in M0. Its cell height and M0 pitch give a seven-track geometry, two tracks more than the 18A logic. One-fin groups also appear among the two-fin devices. Intel 3 L2 SRAM The Intel 3 L2 SRAM uses the familiar HCC sizing pattern: one PU fin, two PG fins, and two PD fins. N3E GPU devices Vector engine logic The N3E XVE field contains repeated two-fin devices with seven-track cell geometry. N3E remains a FinFET process, giving Panther Lake a direct FinFET-to-RibbonFET comparison. N3E L2 SRAM The N3E L2 SRAM uses the same PU:PG:PD fin-count pattern of 1:2:2. Panther Lake-U follows Lunar Lake’s floorplan quite closely. Both pair 4 P-cores with 4 LP E-cores and NPU, media and display engines in similar locations. Lunar Lake also uses Xe2, the direct predecessor to Panther Lake’s Xe3 GPU. This makes Lunar Lake the most direct basis for our comparisons. Arrow Lake differs in core count and uses the older Xe-LPG GPU architecture, so we only use it where it offers a more direct component-level comparison. Compute tile Panther Lake compute-tile floorplans remain sparse even months after launch. Intel 18A’s backside metal and dielectric stack must be removed without damaging the underlying structures before a clean transistor-level floorplan can be imaged. Most published die shots hide or heavily process the background, but we are quite proud of the die shot we achieved and are excited to show the work we have done. We measured the areas of the key components on the compute tile and compared them with their Lunar Lake predecessors on TSMC N3B. These help us to capture changes in block area and compare the two chips across process nodes and designs. Our total tile areas exclude the scribe-line area. The compute-plus-GPU subtotal below uses the PTL-U compute tile and GT1 GPU; it excludes the I/O tile and passive base. Individual block areas use the boundaries marked on the floorplans The compute-plus-GPU row is recomputed from the displayed PTL-U and GT1 areas. Component rows use their stated per-region counts and are not an additive partition of the whole tile. The P-core area remains almost unchanged between Lunar Lake and Panther Lake, despite L2 capacity increasing from 2.5 MiB to 3 MiB. Arrow Lake uses the same Lion Cove core as Lunar Lake but also has a 3 MiB L2. Cougar Cove fits 20% more L2 into the same P-core area. The larger private cache keeps more of each core’s working set close to its execution units, reducing access to shared L3 and DRAM. Extra capacity adds storage leakage and lookup energy, so designers balance it against avoided lower-level accesses. The shared P-core L3 cache also shrank by 14.8%. [2] Cougar Cove combines a similar footprint with Intel’s reported power-efficiency improvements. RibbonFET’s tighter channel control reduces leakage, while PowerVia reduces supply droop and allows tighter voltage guardbands. [1] Darkmont’s four-core LP E-core cluster is 5.0% smaller than Skymont’s on Lunar Lake, with most of the reduction in its L2 regions. The 1 MiB region shrank by 8.4% and the 1.5 MiB region by 14.9%. The tag arrays also use one fewer visible row. Tags identify which memory addresses the data array holds, so rearranging them changes the cache’s layout and wiring without requiring less data capacity. [2] The LP E-cores share one L2. This pools capacity and avoids duplicating all the cache machinery, but the four cores contend for its banks and bandwidth. Their separate cluster also keeps light work away from the performance cluster and its L3, allowing that larger domain to sleep. [1], [2] Cache area includes more than the storage cells. Tags identify each line, decoders select rows, sense amplifiers read the small bitline signal, and wires connect to the banks. Splitting an array into smaller sections shortens wordlines and bitlines, improving access speed, but duplicates peripheral circuits. Panther Lake’s smaller cache regions therefore reflect the complete memory implementation, including how much of each region is devoted to storage. [34] Unlike Meteor Lake and Arrow Lake, Panther Lake has no separate SoC tile. The NPU, LP E-cores, memory controllers, PHYs, media and display engines now share the compute tile. This removes an active die and keeps CPU memory traffic on one die. The cost is moving PHY and I/O-related circuitry onto 18A: drivers, receivers and analog circuits must still meet external voltage, loading and signal-integrity requirements, so their area does not shrink like dense digital logic. [1], [2] The biggest shrink comes from the NPU, which occupies 36.9% less area. NPU 5 consolidates the same total INT8 MAC count into half as many neural compute engines. Each of the three NCEs has a larger MAC array to make the complete NCE envelope 22.6% larger than an NPU 4 engine. Consolidation also halves the number of scratchpads and SHAVE DSPs, from 12 to 6. The MAC array handles matrix multiplication and convolution, while SHAVE executes vector and custom operations that fit the array poorly. [1], [2], [35] The paired floorplans identify each NCE envelope and its scratchpad, MAC, and SHAVE regions. Each measured MAC polygon is counted once per NCE in the area accounting below. The scratchpads store weights, activations, and intermediate results near the MAC arrays, allowing repeated use without fetching them again from DRAM. Halving their number delivers the largest measured area saving but leaves less local storage for the same total MAC count. Layers that no longer fit locally require smaller working tiles or more transfers of intermediate data. The benefit depends on keeping the enlarged arrays busy while managing that tighter storage budget. [36] NPU 5 also adds native FP8. Using half the operand width of FP16 reduces storage and transfer demand, helping workloads fit the smaller local memory budget. Lower precision and format-dependent range make scaling and model validation part of deployment. Hardware activation functions further reduce work that would otherwise occupy the programmable DSPs. [1], [2] Microsoft requires an NPU to deliver at least 40 TOPS for Copilot+ PCs. Both Lunar Lake and Panther Lake meet this threshold, but Panther Lake uses significantly less silicon. GPU tiles Panther Lake is Intel’s first product with Xe3, its latest GPU architecture. It offers two different GPU tiles: a smaller GT1 tile with 4 Xe3 cores on Intel 3 and a larger GT2 tile with 12 Xe3 cores on TSMC N3E. Panther Lake allows us to compare the same GPU architecture across both Intel 3 and TSMC N3E. Wildcat Lake adds a third Xe3 implementation on Intel 18A. A future newsletter will detail Xe3 and its implementation differences across all three process nodes. GT2 scales Xe3 to a different physical layout, with render slices arranged vertically instead of GT1’s horizontal arrangement. Slice placement sets the distances to shared cache banks and the D2D interface. Those wires consume area and add delay, so scaling the number of Xe cores also requires a new balance of cache placement, routing and timing. [1] What’s immediately obvious is that the GT2 tile on TSMC N3E has much smaller Xe cores than GT1. These block areas include logic, caches, and routing. An Xe core on the GT1 tile is ~69% larger than one on Lunar Lake, and ~55% larger than one on GT2. Intel 3 therefore uses substantially more area per Xe core. The block-area gap exceeds the measured logic and SRAM density gaps, bringing routing, timing targets, cell mix, and floorplan allocation into the comparison. The measured vector/matrix engine region is almost unchanged between Lunar Lake and Panther Lake’s GT2 tile. Xe3 retains eight 512-bit vector engines and eight 2048-bit XMX engines per core. Its gains also come from feeding those engines more effectively: more resident threads hide stalls, and variable register allocation lets shaders trade registers per thread against the number of threads kept active. [1] The shared L1/SLM capacity increased by 33% from 192 KiB to 256 KiB, while its area increased only 5%, raising effective density by 27%. L1 retains reused cache lines, while software-managed SLM lets a thread group share data locally. Both reduce traffic to more distant memory. Allocating more SLM per group can also limit how many groups reside on a core at once. [1], [37] The GT1 tile carries 4 MiB of L2 against 16 MiB on the GT2 tile. GT1 divides its L2 cache into four 1 MiB banks, while GT2 uses eight 2 MiB banks. Each bank contains 128 macros, but each N3E macro stores 16 KiB, twice the Intel 3 macro’s 8 KiB capacity. The N3E macro is only 54% larger while holding twice as many bits, giving it 30% higher density: ~23.7 Mbit/mm² versus 18.3 Mbit/mm². Including bank-level circuitry, the gap widens to ~16.9 Mbit/mm² on GT2 versus ~10.4 Mbit/mm² on GT1. GT2 gains density with its macros storing more bits per unit area, and those macros occupy more of each cache bank. Larger macros spread decoder and sense-amplifier overhead across more storage, while a more compact bank layout reduces the share spent on control and routing. The compromise is longer wordlines and bitlines that carry more capacitance. [34] I/O tile Panther Lake uses two I/O tile variants, both fabricated on TSMC N6. The smaller one provides 4 PCIe 5.0 and 8 PCIe 4.0 lanes and serves lower-tier systems as well as those without a discrete GPU, while the larger one adds 8 PCIe 5.0 lanes, bringing the total to 20 lanes, for discrete-GPU connectivity. Panther Lake SKUs with the larger 10- or 12-Xe GPUs use the smaller I/O tile. [38] The smaller I/O tile adds a PCIe 4.0 block and a Thunderbolt block to Lunar Lake’s I/O layout, providing four additional PCIe 4.0 lanes and another Thunderbolt 4 port. Its repeated N6 blocks retain nearly identical areas and layouts. Reusing these proven PHYs and controllers avoids porting and requalifying external interfaces on 18A, where faster digital logic offers less benefit to circuits constrained by the off-chip link. [38] SemiAnalysis’s teardown lab (STEEL) dives deep into the world’s advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. We’re hiring technical experts from system to transistor and everywhere in between. Check out our Careers page. Panther Lake offers scalability and modularity through its disaggregated packaging that partition compute, GPU, and I/O silicon into separate tiles allowing for a suite of tile configurations. This partitioning makes the package part of Intel’s node economics as it determines how much leading-edge wafer area each product consumes, which functions can remain on other processes, and how much configuration freedom Intel can offer from a shared set of tiles. Furthermore, fabricating the compute and GPU tiles separately confines the new 18A process to the compute tile and allows graphics and I/O to use other, more established, and more cost-effective processes. For Panther Lake, the GPU and I/O tiles are assembled alongside the compute tile on a passive silicon base using Foveros-S. Intel’s current technology brief lists a nominal 36 µm pitch for Foveros-S. Through-silicon vias (TSVs) in the base connect the fine wiring above to the larger package connections below. The functional tiles sit side by side on that passive base in a 2.5D configuration. [39] Our cross-section through the compute and GPU tiles shows the package’s wiring hierarchy. Microbumps connect each active tile to the passive silicon base; its fine redistribution layer (RDL) carries the short, dense tile-to-tile links. TSVs carry connections through the base to the package substrate, which fans them out to the much coarser motherboard solder joints. The base supplies interconnect, while computation remains in the active tiles above it. [39] At the compute-tile edge, the higher-magnification inset shows a local microbump spacing of approximately 25.24 µm and a feature width of 12.33 µm. These local spacings are finer than Intel’s nominal Foveros-S value. The X-ray fields further confirm tighter neighboring bumps, consistent across every die-to-die area found on each tile. Additional X-ray analysis is offered after the paywall. Putting the memory controller beside the CPU removes the D2D transfer that CPU memory requests required in Meteor Lake and Arrow Lake. This avoids the extra transmitter, receiver, and link traversal, saving interface energy and latency. Panther Lake’s separate GPU still crosses a D2D link to reach DRAM, so its larger local caches also help contain package traffic. [1], [40] Smaller dies are less likely to contain a random fatal defect, and screening them before assembly prevents one bad tile from consuming a complete package of good silicon. Reuse also spreads design and qualification work across more products. Against those gains, Intel pays for the passive base, D2D circuits, extra bonding and test steps, and losses during assembly. Cost per working product across the portfolio captures the combined effect of wafer yield, reuse, test, and assembly. [29] Wildcat Lake packaging Intel launched Core Series 3, formerly Wildcat Lake, on 16 April 2026 for value mobile and edge systems. Wildcat Lake keeps 18A but removes the passive base and combines more functions on one die to simplify the package. The two products therefore reveal two distinct ways to commercialize the same leading-edge process. [41] Wildcat Lake’s 18A die combines up to two Cougar Cove P-cores, four Darkmont LP E-cores, two Xe3 cores and a smaller NPU. A separate platform-controller die supplies I/O, connected through UCIe, Intel’s first processor implementation of the standard. Consolidating graphics remove a tile boundary and the passive base, reducing assembly complexity for a modest-bandwidth value product. It also ties CPU and graphics scaling to the same die, giving up Panther Lake’s ability to swap in a much larger GPU. [42], [43] In July 2021, Intel CEO Pat Gelsinger set out an ambitious process roadmap aimed at regaining performance leadership by 2025, later described as five nodes in four years. Five years and one CEO later, Intel’s comeback story is not as unambiguously positive as Pat may have hoped. [44], [45] Intel once set the pace for process technology, bringing high-k metal gate technology and FinFETs into volume production years ahead of the rest of the industry. Its 22 nm FinFET process reached consumers with Ivy Bridge in 2012. [46] Intel’s integrated device manufacturing (IDM) model allowed its architects and process engineers to co-optimize products and processes. Starting with Sandy Bridge, Intel dominated x86, while AMD struggled with Bulldozer. That lead faltered at 14 nm and broke at 10 nm. Intel targeted a massive 2.7× density increase, but the node arrived years late and required several revisions before it could support Intel’s full lineup. This delay forced Intel to stretch 14 nm across six generations, while TSMC moved ahead in process technology and AMD recovered in x86. By 2019, Intel was still shipping 14 nm across most of its product stack, with its 10 nm client ramp focused on Ice Lake mobile processors. Meanwhile, TSMC was shipping N7 and N7+, and AMD’s Zen 2 compute chiplets used N7 to raise core counts and improve efficiency. Intel’s process failures were central to its decline, but unsound business decisions furthered their downward slide. Product delays compounded product mistakes, pushing client, server, and FPGA roadmaps off schedule. Several attempts to enter AI (Nervana and Gaudi) and networking (Tofino) also failed to establish lasting businesses. Intel’s recovery has focused on consumer CPUs and advanced packaging. Tiger Lake, Alder Lake, Lunar Lake and now Panther Lake have restored Intel’s consumer roadmap. On the process side, Intel 4 shipped with Meteor Lake, Intel 3 with Granite Rapids and Sierra Forest, and Intel 18A with Panther Lake. Intel has also made advanced packaging part of its foundry offering. However, Intel is still playing catch-up in servers. Several Xeon generations arrived years late and trailed contemporary AMD and Arm server CPUs in performance, efficiency, and core count. The process roadmap is back, but Intel does not hold the same process-technology leadership position it held prior to 10 nm. The introduction of gate-all-around nanosheets and backside power delivery are two of the biggest changes to transistor integration in a decade. Intel took on both changes at once: 18A paired its first RibbonFET with PowerVia in Panther Lake. Panther Lake is a substantial manufacturing milestone. Our cross-sections show how RibbonFET and PowerVia reshape local contacts and wiring, while the floorplans show where architectural consolidation and process choices save area. A sustained competitive lead depends on product performance, cost, yield, and the next implementation. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page.. [1] Intel, “Intel Tech Tour 2025 Panther Lake recap,” Doc. 866361, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/866361/ITT_2025_Panther_Lake_Recap1.pdf [2] Intel, “Core Ultra processors Series 3 datasheet, volume 1,” Doc. 872188-001, Jan. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/872188/872188-001.pdf [3] N. Horiguchi and E. Beyne, “Backside power delivery: How to power chips from the backside,” imec Reading Room, Nov. 25, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/how-power-chips-backside [4] W. Hafez et al., “Intel PowerVia technology: Backside power delivery for high density and high-performance computing,” in Proc. IEEE Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2023, pp. 1–2, doi: 10.23919/vlsitechnologyandcir57934.2023.10185208. [5] K. Fischer et al., “Intel 18A platform technology featuring RibbonFET (GAA) and PowerVia for advanced high-performance computing,” in Proc. Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2025, pp. 1–3, doi: 10.23919/vlsitechnologyandcir65189.2025.11075006. [6] K.-F. Cheng, C.-L. Teng, H.-Y. Huang, and H.-C. Chen, “Metal oxide composite as etch stop layer,” U.S. Patent 12 176 247 B2, Dec. 24, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12176247B2/en [7] S. W. King, “Dielectric barrier, etch stop, and metal capping materials for state of the art and beyond metal interconnects,” ECS J. Solid State Sci. Technol., vol. 4, no. 1, pp. N3029–N3047, 2015, doi: 10.1149/2.0051501jss. [8] A. V. Mule’, D. J. Towner, D. Seghete, C. R. Ryder, and A. A. Gonzalez, “Multi-layer etch stop layers for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20220102343 A1, Mar. 31, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20220102343A1/en [9] C.-C. Wang and J. H. Wang, “Interconnect structure with dielectric cap layer and etch stop layer stack,” U.S. Patent Appl. 20230253247 A1, Aug. 10, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20230253247A1/en [10] Y. J. Wu, K.-F. Cheng, C.-C. Lee, H.-K. Chang, and H.-Y. Huang, “Etch stop layer for interconnect structures,” U.S. Patent Appl. 20240332070 A1, Oct. 3, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240332070A1/en [11] M. G. Rainville, N. Shankar, K. S. Reddy, and D. M. Hausmann, “Deposition of aluminum oxide etch stop layers,” U.S. Patent Appl. 20180197770 A1, Jul. 12, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20180197770 [12] J. S. Leib et al., “Conductive lines having molybdenum liner and tungsten fill for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20240429126 A1, Dec. 26, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20240429126 [13] M. Naik, “Cobalt enables power and performance scaling at single-digit logic nodes,” Applied Materials, Dec. 17, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://www.appliedmaterials.com/us/en/blog/blog-posts/cobalt-enables-power-and-performance-scaling-at-single-digit-logic-nodes.html [14] Lam Research, “Breaking through AI’s invisible barrier with molybdenum,” Lam Research Newsroom, May 6, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://newsroom.lamresearch.com/molybdenum-metallization-ai-revolution [15] P. Yashar, G. Malyavanatham, and H. Vijwani, “Integrated circuit interconnect structures with niobium barrier materials,” U.S. Patent Appl. 20240112951 A1, Apr. 4, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240112951A1/en [16] Applied Materials, “Applied Materials unveils chip wiring innovations for more energy-efficient computing,” Applied Materials Investor Relations, Jul. 8, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://ir.appliedmaterials.com/news-releases/news-release-details/applied-materials-unveils-chip-wiring-innovations-more-energy [17] Samsung, “Samsung showcases AI-era vision and latest foundry technologies at SFF 2024,” Samsung Semiconductor, Jun. 13, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://semiconductor.samsung.com/news-events/news/samsung-showcases-ai-era-vision-and-latest-foundry-technologies-at-sff-2024/ [18] C. W. Yeung et al., “Channel geometry impact and narrow sheet effect of stacked nanosheet,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2018, pp. 28.6.1–28.6.4, doi: 10.1109/iedm.2018.8614608. [19] S. Mochizuki et al., “Evaluation of (110) versus (001) channel orientation for improved nFET/pFET device performance trade-off in gate-all-around nanosheet technology,” in Proc. Int. Electron Devices Meeting (IEDM), Dec. 2023, pp. 1–4, doi: 10.1109/iedm45741.2023.10413854. [20] D. G. Ouellette et al., “Fabrication of gate-all-around integrated circuit structures having molybdenum nitride metal gates and gate dielectrics with a dipole layer,” U.S. Patent 12 051 698 B2, Jul. 30, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12051698B2/en [21] imec, “Advancing the CFET-based device roadmap with novel integration modules and standard-cell architectures,” imec, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/advancing-cfet-based-device-roadmap-novel-integration-modules-and-standard-cell [22] A. Reznicek, X. Miao, C. Lee, and J. Zhang, “Wrap around contact for nanosheet source drain epitaxy,” U.S. Patent 11 302 813 B2, Apr. 12, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US11302813B2/en [23] J. A. Kittl, J. G. Hong, D. R. Palle, and M. S. Rodder, “Methods for varied strain on nano-scale field effect transistor devices,” U.S. Patent 9 978 833 B2, May 22, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9978833B2/en [24] S. Gandikota et al., “Method of reducing metal gate resistance for next generation NMOS device application,” Int. Patent Appl. WO 2024/137272 A1, Jun. 27, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/WO2024137272A1/en [25] J. Zhang et al., “Full bottom dielectric isolation to enable stacked nanosheet transistor for low power and high performance applications,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2019, pp. 11.6.1–11.6.4, doi: 10.1109/iedm19573.2019.8993490. [26] C. Yoo, J. Chang, Y. Seon, H. Kim, and J. Jeon, “Analysis of self-heating effects in multi-nanosheet FET considering bottom isolation and package options,” IEEE Trans. Electron Devices, vol. 69, no. 3, pp. 1524–1531, Mar. 2022, doi: 10.1109/ted.2022.3141327. [27] S. S. Pradhan, D. B. Bergstrom, J.-S. Chun, and J. Chiu, “Tungsten gates for non-planar transistors,” European Patent Appl. EP 3 506 367 A1, Jul. 3, 2019. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/EP3506367A1/en [28] L. Schloss and X. Ba, “Tungsten films having low fluorine content,” U.S. Patent 9 754 824 B2, Sep. 5, 2017. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9754824B2/en [29] Intel Foundry, “Accelerating AI and HPC with advanced process and packaging technologies,” Doc. 367370-001US, Jun. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-11/intel-foundry-hpc-ai-brief.pdf [30] M. Lofrano, X. Chang, H. Oprins, and Z. Tokei, “Mitigating the thermal bottleneck in advanced interconnects,” imec, Sep. 28, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/mitigating-thermal-bottleneck-advanced-interconnects [31] S. Bair, “Intel at ISSCC 2025: Navid Shahriari invited talk, eight papers, forums, panelist & product details,” Intel Community, Feb. 19, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://community.intel.com/t5/Blogs/Tech-Innovation/Edge-5G/Intel-at-ISSCC-2025-Navid-Shahriari-Invited-Talk-Eight-Papers/post/1667592 [32] D. Chandra, E. Potladhurthi, D. R. S. Reddy, and K. S. Rengarajan, “Tunable negative bitline write assist and boost attenuation circuit,” U.S. Patent Appl. 20160203857 A1, Jul. 14, 2016. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20160203857A1/en [33] Synopsys, “Advantages of firmware-based training in high-speed DDR IP,” Synopsys IP Technical Bulletin. Accessed: Sep. 14, 2026. [Online]. Available: https://www.synopsys.com/articles/firmware-based-training-ddr-ip.html [34] N. Muralimanohar, R. Balasubramonian, and N. P. Jouppi, “CACTI 6.0: A tool to understand large caches,” Hewlett-Packard Laboratories, 2009. Accessed: Sep. 14, 2026. [Online]. Available: https://users.cs.utah.edu/~rajeev/cacti6/cacti6-tr.pdf [35] Intel, “Intel Tech Tour 2024 Lunar Lake AI hardware accelerators,” Doc. 824436, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/824436/2024_Intel_Tech%20Tour%20TW_Lunar%20Lake%20AI%20Hardware%20Accelerators.pdf [36] Y.-H. Chen, J. Emer, and V. Sze, “Eyeriss: A spatial architecture for energy-efficient dataflow for convolutional neural networks,” in Proc. 43rd ACM/IEEE Annu. Int. Symp. Comput. Archit. (ISCA), Jun. 2016, pp. 367–379, doi: 10.1109/isca.2016.40. [37] Intel, “Introduction to the Xe-HPG architecture,” Doc. 758306, Nov. 4, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/developer/articles/technical/introduction-to-the-xe-hpg-architecture.html [38] Intel, “Core Ultra processors Series 3 for the edge,” Doc. 855291. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/855291/Intel%C2%AE%20Core%E2%84%A2%20Ultra%20Processors%20Series%203%20for%20Edge%20Overview_2.pdf [39] Intel Foundry, “Foveros technology brief,” Doc. 366411-001US, Feb. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-07/foveros-25d-product-brief.pdf [40] D. Das Sharma, “UCIe: Building an open chiplet ecosystem,” UCIe Consortium, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.uciexpress.org/_files/ugd/0c1418_c5970a68ab214ffc97fab16d11581449.pdf [41] Intel, “Intel launches Intel Core Series 3 processors,” Intel Newsroom, Apr. 16, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-launches-intel-core-series-3-processors-changing-the-game-for-everyday-computing.html [42] Intel, “Core Series 3 launch press deck,” Apr. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://download.intel.com/newsroom/2026/Intel-Core-Series-3/Intel-Core-Series-3-Launch-Press-Deck.pdf [43] Intel, “Intel outlines architectures for agentic AI at Hot Chips 2026,” Intel Newsroom, Aug. 24, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-outlines-architectures-for-agentic-ai-at-hot-chips-2026.html [44] Intel, “Intel accelerates process and packaging innovations,” Intel Investor Relations, Jul. 26, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/filings-reports/all-sec-filings/content/0001193125-21-224438/d199788dex991.htm [45] Intel, “Intel reports third-quarter 2021 financial results,” Intel Investor Relations, Oct. 21, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/1505/intel-reports-third-quarter-2021-financial-results [46] Intel, “3rd generation Intel Core processors bring exciting new experiences and fun to the PC,” Intel Investor Relations, Apr. 23, 2012. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/577/3rd-generation-intel-core-processors-bring-exciting
Man Utd Eye Sunderland's Brian Brobbey As Price Tag Revealed
Manchester United target attacking reinforcements to revive a stagnant front line, but the Black Cats demand a premium for their prolific Dutch talisman.
Navajo Nation-owned North Stone wins Air Force IT contract
Navajo Nation-owned North Stone LLC won an Air Force investigative agency IT contract. Its value and term were not disclosed.
Huang says 1 number in the AI debate isn't science-based at all
Nvidia's CEO took aim at a figure that has shaped careers and portfolios, and the man behind it has his own doubts.
Ousmane Dembélé to captain France in Kylian Mbappé’s absence
Paris Saint-Germain forward Ousmane Dembélé (29) will captain the France national team in the absence of Kylian Mbappé (27) for the remainder of the international break after the latter was forced ...
Press pool dispute escalates as White House cuts CNN from Air Force One travel
The White House has barred CNN from traveling on Air Force One this weekend. It's another chapter in President Trump's fight with the press, and it appears there will be no TV pool coverage today.
Opinion: Prop. 40 is the key to preserving health care access and saving lives
Passing this ballot measure forces the super-rich to fund emergency rooms, preventing disastrous statewide closures.
Team News and Predicted Line-Ups: Germany vs. Greece
Jurgen Klopp’s revamped Germany faces a surging Greece as injury setbacks force tactical shifts ahead of this pivotal Nations League clash at the WWK Arena.
Maritime industry discussed at roundtable in Anacortes
ANACORTES — Members of Skagit County’s maritime workforce, county leaders and economic development groups gathered to discuss the future of the maritime industry Friday at the Seafarers Memorial Park Building