SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " OWNED " 1,196 found 🔀 AI-powered Shuffle
Top salaries at HCSC 2025
Health Care Service Corp. is a Chicago-based, customer-owned company that runs Blue Cross & Blue Shield plans in Illinois, Montana, New Mexico, Oklahoma and Texas.
Northeast Ohio's largest women-owned businesses 2026
Top 25 majority women-owned businesses in Northeast Ohio.
Kennedy Center exterior remains covered after Trump’s name is removed
Large striped tarps remained on the Kennedy Center’s exterior Sunday, prompting confusion and frustration from some visitors to the renowned arts venue after President Donald Trump’s name was removed over the weekend.
Sunday Sports: Two North Country athletes crowned state champions
Here’s a recap of your North Country sports this Sunday.
Is SMIC N+3’s Metal Pitch Smaller than Intel 18A’s?
Almost four years ago, we published that SMIC had started shipping 7 nm (N+1) chips. Now, SMIC is shipping its third-generation 7 nm (N+3) process in Huawei’s Kirin 9030, with a minimum metal pitch of 32.5 nm, about 10% tighter than the 36 nm minimum metal pitch shipping in Intel’s latest Panther Lake CPUs on 18A. The headline is true, but incomplete cherry picked metric. N+3 reaches the density of TSMC N6 through aggressive DUV multi-patterning and design-technology co-optimization (DTCO), but it pays for that in complexity, efficiency and process control. We found this and more in our reverse engineering and teardown where we cover SMIC’s N3 process technology, Huawei’s packaging, memory, architecture, and more. SemiAnalysis has been building a state-of-the-art teardown lab in Oregon capable of analyzing the world’s most advanced and important chips over the last year and half. We have already generated revenue on advanced datacenter chip teardowns including our recent reverse engineering of a major TSMC customer’s COUPE CPO optical engine + EIC 3D stack. This is the first public report from the SemiAnalysis Teardown Engineering & Evaluation Lab, or STEEL for short. The lab is aggressively scaling up and out and we’re excited to announce it publicly. This is a bit of inconvenient timing for TechInsights as they are private equity owned and currently being sold while having enjoyed virtually no credible competition for decades. This has led to TechInsights underinvesting in CAPEX. SemiAnalysis exceeds TechInsights in revenue despite no venture or private equity ownership and being founded only 6 years ago. Because we have no external investors and are founder led, we move faster, build faster, and we can release client chip teardowns for free regularly, while focusing on datacenter for our major clients. Here’s the first public image from our lab, the HiSilicon Kirin 9030 Pro SoC: This report will detail our teardown of the Kirin 9030 and our findings on SMIC’s N+3 process, the most advanced in China. For comparison, we’ll show our teardown of the MediaTek Helio G99, made on TSMC N6. Through this comparison, we can look at the effect of export controls – SMIC N+3 and TSMC N6 are comparable nodes, but one is heavily export-controlled, the other free to use the West’s most advanced equipment. Here we see both China’s progress and constraints. SMIC N+3 reaches TSMC N6-class logic density, but it requires far more aggressive DUV multi-patterning, so it does not match N6 on process maturity or cost. The Kirin 9030 Pro performs similarly to three-year-old Android flagships, and trails far behind the current flagship SoCs from Apple, Qualcomm, MediaTek, and Samsung. The efficiency gap is even wider. Export controls have not stopped Huawei and SMIC from shipping advanced silicon, but they have forced a different path. Without EUV, SMIC is leaning harder on DUV multi-patterning, DTCO, and increasingly complex integration. The roadmap continues forward through tighter design rules and backside power, but each step adds cost and process risk. Huawei’s τ scaling and LogicFolding show another path: stacking active logic and recovering density through advanced packaging and system-technology co-optimization (STCO). To understand the Kirin 9030, we must first understand Huawei’s SoC history. HiSilicon is Huawei’s chip design arm, responsible for the Kirin smartphone SoCs, Kunpeng server CPUs, Ascend AI accelerators, and switch/router networking silicon. Before export controls, Huawei was TSMC’s largest customer – the only customer on TSMC’s first EUV node, N7+, and among the first on N5, alongside Apple. That ended in late 2020. Huawei switched to Qualcomm SoCs in its flagship smartphones, though export controls limited them to 4G-only variants. In late 2023, Huawei returned to in-house silicon with the Kirin 9000s, a successor to the Kirin 9000, fabricated on SMIC N+2 instead of TSMC N5. In the following years, they released the Kirin 9010 and 9020 on the same N+2 process. These chips used Huawei’s in-house TaiShan CPU cores and Maleoon GPU. We have not torn down a Kirin 9020 ourselves, so the predecessor die shot is from Kurnal. The die shots show how Huawei spent its silicon budget: which functional blocks are where, and how their areas compare to the predecessor. First, a quick guide to the major blocks on the die. The total die area is nearly identical, but the 9030 uses that area more aggressively. A denser process lets Huawei fit an extra middle CPU core, more GPU and NPU cores, and larger caches into the same footprint. In contrast, the Helio G99 is a much smaller, low-cost SoC, built for budget smartphones rather than a flagship device. While the Kirin 9030 is ~140 mm², the G99 is only ~29 mm², roughly one-fifth the area. The underlying TSMC process technology, however, is directly comparable as a baseline for analyzing SMIC’s. The Kirin 9030 is an evolutionary refresh, not a clean-sheet design. Its CPU, GPU and NPU cores carry over the 9020’s families, and the gains come from three levers: the SMIC N+2-to-N+3 process step, DTCO and floorplan work, and incremental microarchitecture. Area is where the first two show up, and the 9030 scales well here. Performance and efficiency are the harder test. Huawei’s design holds up better than its node would suggest, but the chip still trails, both because N+3 sits behind the leading-edge nodes and because its cores, while competent, remain a few generations behind the newest designs. The new prime core is an incremental update. The main changes are a 10% frequency increase from 2.5 GHz to 2.75 GHz and a doubling in the L2 cache from 1 MiB to 2 MiB. Despite the increased cache, the core size decreased by 7.6%. Excluding the private L2 cache, the core size decreased by 21%. This is a large reduction for an incremental node. Compared with the TaiShan New V120 core in the Kirin 9020, the Kirin 9030’s middle core is almost unchanged architecturally, yet each core shrinks by ~22%. Most of that comes from the move from N+2 to N+3, with layout likely accounting for the rest. Visually, the most noticeable change is the increase from 3 middle cores to 4. There is also a 20% increase in the shared L3 cache of the big cluster. This helps to improve multi-core performance without sacrificing much in terms of area. Even with each core shrinking, the big CPU cluster’s total area is essentially unchanged. The per-core savings went back into an additional middle core and larger caches. The tiny cores shrank less than the prime core (excluding its L2 cache) and less than the middle cores. This is likely because fixed overhead is a larger share on a small core. We cannot resolve any architectural changes from the die shot alone, but the per-clock and efficiency gains shown below point to more than pure process and layout scaling. The area reduction was offset by a doubling of the shared L2 cache from 2 MiB to 4 MiB, leaving the total tiny CPU cluster area slightly larger. Area is the easiest improvement to see from a die shot, but it is only one part of PPA (power, performance, area). For modern logic, power and performance matter just as much, and often more. Since Dennard scaling broke down in the mid-2000s, voltage and frequency have not scaled in step with transistor dimensions, so each node has had to fight harder for gains in performance and efficiency. The starkest comparison is not Kirin 9020 versus Kirin 9030 Pro. Apple’s efficiency cores run circles around Huawei’s prime core. Apple’s low-power core delivers 20% higher integer performance while drawing only 1 W, compared with 4.5 W for Huawei’s prime core. N+3 matches TSMC N6, but N6 is several generations old. Apple and Qualcomm build on N4 and N3P, which are denser and sit on a better voltage-frequency curve, giving them a larger transistor budget and more performance per watt. The 9030’s own cores did improve. The middle and tiny cores gained 17% and 14% in per-clock integer performance over the 9020, with floating-point flat on the middle core and up 11% on the tiny. The tiny core improves cleanly, with performance rising while power falls and efficiency increases by 45% in integer and 24% in floating point. The middle core is mixed: integer performance rises but power rises faster, cutting integer efficiency by 7%, while lower power lifts floating-point efficiency 16%. Per-clock gains at the same or lower frequency are microarchitectural, so the cores are tuned, not just shrunk. Both also failed to hold their rated maximum frequencies, pointing to thermal, power, or stability limits. Per clock, the middle core sits around Arm Cortex-A720 and the tiny core near the Cortex-A520; absolute performance trails because Huawei clocks them much lower. The prime core is roughly Cortex-X2 class per clock, a 2021 design. Apple’s 2020 M1 Firestorm core is still 35% higher per clock and 57% faster in absolute integer performance at a similar 4.5 W. The current leading edge is further ahead again: the Apple M5 P-core is 60% higher per clock and 2.7× faster, the Arm C1 Ultra 45% higher and 2× faster. Matching older high-end cores per clock is a genuine design achievement. What Huawei cannot match is the voltage-frequency curve and transistor budget of leading-edge nodes, which let Apple, Qualcomm and others spend more transistors in the same area on wider cores, larger caches and deeper buffers while running at lower voltage. Huawei’s LogicFolding roadmap is one answer, stacking active logic to recover density and shorten signal paths. We return to it later. The GPU compute units (CUs) changed more visibly than the CPU cores, moving to a more rectangular layout for both the arithmetic logic unit (ALU) clusters and the CU overall. Even with ray-tracing support added, a CU shrank ~28%. However, that shrink is offset by the increase from 4 to 6 CUs and the area outside the CUs grew 33%. Overall, the GPU cluster is larger by ~10%. The GPU is where Huawei makes its biggest gains. The Maleoon 935 is not competitive with current flagships, but it is a large step up from the 920 and reaches older-flagship territory. In 3DMark it is 70% faster in Wild Life Extreme (WLE) and 79% faster in Steel Nomad Light (SNL) than the 920; with 11% higher clocks and 50% more CUs, the ~67% theoretical uplift roughly matches WLE and is beaten by SNL. It edges ahead of the Snapdragon 8+ Gen 1 in WLE and SNL, and the Dimensity 9200 and Apple A16 in WLE, but stays far behind newer parts: the Snapdragon 8 Elite Gen 5 and Dimensity 9500 are ~2.4–2.6× faster in WLE and ~3.2× faster in SNL. The Maleoon 935 is Huawei’s first GPU with hardware-accelerated ray tracing; there it lands slightly ahead of the Exynos 2200, and on par with the Apple A16, with current flagships up to 3.7× faster. The Neural Processing Unit (NPU) saw the largest structural changes of any block, moving from a Lite and a Tiny core in the Kirin 9020 to a Lite and two Tiny cores in the Kirin 9030. Both core types also show significant layout changes. This is a reversal in Huawei’s NPU design. The Kirin 9000 5G, its last flagship chip on TSMC N5, used two Lite and one Tiny core. The series of SoCs on SMIC N+2 moved to one Lite and one Tiny core, likely for area savings. With the Kirin 9030, Huawei has shifted back toward a larger multi-core NPU cluster, but with the additional area going to a Tiny core rather than a Lite core. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Before diving into the process stack, the package and memory are worth separating from the SoC itself. The Pro variant of the Kirin 9030 carries 12 GB of Samsung DRAM, with two stacks of four dies each. The dies were identified as the K4L2E165YD, a 12 Gb LPDDR5X-9600 device fabricated on Samsung’s 1a node, the fourth generation of its 10 nm-class DRAM after 1x, 1y and 1z. 1a has shipped in volume since 2022, so this is current memory rather than older-node inventory. The 16 GB Pro Max variants we obtained were found with both CXMT and Samsung packages. The CXMT package is marked CXDD7JEDM, with two stacks of four dies, packaged in week 45 of 2025. The inferred die dimensions from X-ray computed tomography (CT) are consistent with a known density of ~0.3 Gib/mm² for the CXMT G4 process, roughly equivalent to other manufacturers’ 1z processes. The Kirin 9030 uses a typical integrated package-on-package (iPoP) stack: multiple DRAM dies in a memory package sit above an organic redistribution layer (RDL) interposer, which sits above the SoC and package substrate. The full package is then mounted to the printed circuit board (PCB) through ball-grid array (BGA) solder bumps. The memory package substrate is a thin bismaleimide-triazine (BT) laminate carrying the LPDDR5X stack. The organic RDL interposer over the SoC routes the PoP signals around the die and carries possible dummy thermal copper pillars. The package substrate, a thicker Ajinomoto Build-up Film (ABF) build-up over a BT core, fans the flip-chip bumps out to BGA pitch and embeds the power planes. The whole stack is organic. The only silicon is the SoC and the LPDDR5X dies; there is no silicon interposer. Keeping it all-organic brings the package’s coefficient of thermal expansion (CTE) close to the PCB’s, reducing board-level warpage, and avoids the cost of a silicon interposer the SoC’s bandwidth does not need. In an iPoP stack, the memory package connects to the organic RDL interposer through an array of solder bumps. Underfill fills the gap around those bumps, adding stiffness and protecting the joints from mechanical stress. The Pro and Pro Max variants differ here, which we cover behind the paywall. The die shot and architecture tell us how Huawei allocated its silicon budget. The process tells us what SMIC can manufacture. We use the Helio G99 as the process reference for TSMC N6. Both SMIC N+3 and TSMC N6 are evolutions of previous 7 nm-class nodes. We used targeted TEM cross-sections through logic and memory regions, imaged in both fin-cut and gate-cut directions. Each cross-section caption gives its horizontal field width (HFW), the real width of the imaged area. We start at the transistor fins, then move up through standard cells, local interconnect, and SRAM. SMIC has not overtaken Intel or TSMC. It uses aggressive DUV scaling and DTCO to reach N6-class density, but that density doesn’t translate into comparable performance and efficiency, for two reasons: the node gap to leading-edge nodes, and Huawei’s core designs. Fin Profile One of the most important knobs in a FinFET process is the fin profile: the shape of an individual fin and the channel where current passes from source to drain. The ideal fin is tall, narrow, and nearly vertical. A taller fin increases effective channel width, while a narrower fin improves electrostatic control by thinning the body the gate must control. Push either too far, and the process pays for it: weaker drive current, fragile fins, taper, footing and line-edge variation that hit yield and device variability. The Intel 22 nm, 14 nm, and 10 nm fin cross-sections show how FinFET nodes have improved over time. 22 nm fins were a first-generation structure, relatively short, wide and strongly tapered. The shape limits current density and reduces gate control uniformity across the height of the fin. At 14 nm and 10 nm, Intel pushed the fins taller and narrower while also making the sidewalls more vertical. Rather than shrinking the device, these changes increase the effective channel width per fin and improve electrostatic control. The trade-off is that taller fins at tighter pitches are much more difficult to manufacture. Now, let’s compare the Helio G99 on TSMC N6 with the Kirin 9030 on SMIC N+3. Both processes are in the same class, with fin pitch of 30-32 nm on N+3 and 34 nm in our N6 cross-section. The pitch for N6 is especially interesting as N7’s HD library is generally listed with a 33 nm fin pitch, and N6 did not shrink pitches directly. Its density gains came from DTCO instead of tighter pitches. The 34 nm pitch was stable across our sampled region and serves more as a comparison against the SMIC N+3 we have not investigated further. Pinning down N+3’s fin patterning scheme takes more than one core unit. The CPU cores show a dense ~32 nm pitch, with the pitch between N-P fin pairs alternating between 78 and 88 nm. Logic alone may be consistent with dual-pitch mandrels of 120 and 110 nm, but this is a complex and unusual approach. Combining the pitch from the the 8T SRAM, which has more complex repeat unit, with the CPU core sequence allows us to reverse engineer the patterning steps with more confidence. As both the logic and SRAM should share the same base grid, a single CD mandrel lithography pattern with 128 nm pitch undergoing SAQP produces a die-wide ~32 nm grid (128 nm/4), which supports the pitch sequencing seen in both logic and SRAM cells. In the sampled cross-sections, N+3 shows a taller, narrower, higher-aspect-ratio fin than N6. The measured fin aspect ratio is ~9.5:1 on N+3 versus 7.8:1 on N6. N+3 also shows less top rounding, with an estimated radius of ~2 nm, compared with 2.8 nm on N6. Even though the fin widths differ, the ratio of top rounding to fin width tells the same story, with N+3 at 0.37 and N6 at 0.44. In a geometric sense, lower is better; a perfectly rectangular fin would have no top-rounding penalty. These are single-digit-nanometer features measured from a handful of cuts, so treat the absolute numbers as approximate. The important result is the relative gap: N+3’s fins are consistently taller, narrower and less rounded than N6’s. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Standard Cell A standard cell is the basic building block of chip layout: a fixed-height row pairing one NMOS and one PMOS transistor that share a gate, tiled in a grid to build logic blocks. The key dimensions are contacted gate pitch (CGP), cell height (CH), fin count, and the lower-metal routing grid. To measure density, we use the Bohr metric: a weighted average of NAND2 gate area (60%) and scan flip-flop area (40%). This represents a realistic mix of combinational and sequential logic. This metric has its limitations, especially for complex cell layouts like TSMC’s FinFLEX, which alternates cells with different fin counts. Even so, it is the best metric for a pure process-level comparison. Another important measurement is the fin pitch; it refers to the distance between two fins of the same transistor. In a FinFET process, multiple fins are used in each transistor to increase the drive current and thus performance. TSMC N6 ships both a high-density (HD) library with 2 PMOS and 2 NMOS fins per cell, and a high-performance (HP) library with 3 of each. More fins under the shared gate mean more effective channel width. HP cells switch harder at the cost of area. Designers mix the two on a die, primarily spending HP cells on timing-critical paths, and matching their PPA targets. In the Cortex-A55 core of the Helio G99, we found a cell height of 240 nm for the HD cell. MediaTek has used HD cells in the G99 to minimize die size and thus cost. As an SoC for budget smartphones at ~$100, this is essential. By contrast, we found only one library in the Kirin 9030, with 2 NMOS and 2 PMOS fins. This suggests a narrower library strategy than TSMC N6, where both HD and HP libraries are widely used. This likely reflects the smaller customer base and the more constrained domestic design and electronic design automation (EDA) ecosystem. In all three CPU cores of the Kirin 9030, we found cell heights of 228 nm, 5% smaller than on N6. This is also a reduction of 9.5% over SMIC N+2’s cell height of 252 nm. SMIC N+3 and TSMC N6’s HD library both feature a CGP of 57 nm. For SMIC, this is a 9.5% shrink over N+2. In the past, CGP and cell height alone may have been enough to compare transistor density. Now, however, we must consider scaling boosters and DTCO as well. SMIC’s density gain does not come from EUV. It comes from using every available DTCO booster aggressively. First is fin depopulation: reducing the number of NMOS and PMOS fins in each cell. The first FinFET nodes started with 3 or 4 fins for each transistor. SMIC N+3 and TSMC N6 HD both use only 2 fins per transistor, trading drive strength for density. Next is contact over active gate (COAG). By landing the gate contact directly over the active gate, instead of out over the isolation region, the cell height drops. N+3 integrates COAG while N6 does not. Our N+3 gate-cut cross-sections indicate COAG, with the gate contact sitting over the active region, while N6 shows an off-gate contact. Last is single diffusion break (SDB). Diffusion breaks are inserted between cells in the same row to provide electrical isolation, but they also introduce local layout effects (LLE), layout-dependent shifts in electrical characteristics. In the past, a double diffusion break was used, consuming the space of two CGPs. SMIC N+3 and TSMC N6 instead use SDB, saving area but increasing LLE sensitivity. This must be controlled at the process level and accurately modeled in the process design kit (PDK) so that EDA tools can account for it. Overall, SMIC N+3 has a transistor density of 113.4 MTr/mm², slightly above TSMC N6 at 107.7 MTr/mm². Even without EUV, SMIC has achieved density beyond TSMC’s mature N6 node which utilizes EUV. Metal Stack The smallest critical dimension in the teardown is M0; SMIC N+3 uses a 32.5 nm local metal pitch. That is smaller than the 36 nm M0 pitch on Intel 18A in Panther Lake. However, this does not mean that SMIC has a better process than Intel 18A or TSMC N3P. M0 is a local intra-cell routing layer. Its usefulness depends on the full interconnect stack: M1 and M2 pitch, track count, via and line resistance, design rules, mask count, overlay control, and routing flexibility. The 32.5 nm M0 is consistent with self-aligned quadruple patterning (SAQP), whose four-population line-width loading we read coarsely as alternating widths of 21.5 to 24 nm; M1 and M2, at 38 and 40 nm, are consistent with self-aligned double patterning (SADP), a single A/B split. On TSMC N6, M0, M2, and M3 sit at a relaxed ~40 nm and are consistent with SADP-class double patterning, with no need for quadruple patterning. That said, we measure M2 for example at ~43 nm, likely inflated by sparse routing. We do not assign any specific layer to EUV from our cross-sections; the distinction we can draw is double versus quadruple patterning, not lithography wavelength. Transistor-level density in the front-end-of-line (FEOL) sets an upper bound, but the design is ultimately limited by what the interconnect stack can route. The lowest metals are the most important for standard-cell density, but the semi-global and global layers determine how usable that density is at the block and chip level. Two axes are commonly used for chip cross-sections: the fin-cut and the gate-cut. The micrograph above is a fin-cut and shows metals 0 through 3. This axis lets us see the even-numbered metals, with M0 right above the fins. There are two kinds of M0 lines. The first are the power rails; these are wide wires for the VDD and VSS running horizontally at the top and bottom edges of each standard cell. The wide wires measure 55 nm across, more than double the other M0 lines. Their width minimizes resistance and reduces IR drop. The second kind are intra-cell wires, short segments within the cell that connect terminals to M1. These have alternating widths between 21.5 and 24 nm. The M0 pitch is 32.5 nm, a 19% reduction versus N+2 and N6. At this pitch, DUV patterning requires more aggressive multi-patterning, increasing mask count, overlay sensitivity, process complexity and cost. M0 is below what a single DUV-defined spacer (SADP) can resolve, so SMIC cascades a second spacer step (SAQP). The cross-section reflects the cost: the M0 trenches are visibly more re-entrant (narrower at the bottom than the top) than M1 or M2 on the same chip and carry a bright barrier-rich foot where the trench meets the etch-stop layer. That shape is partly the intended damascene profile, as a slightly narrow bottom helps void-free copper fill, but its magnitude at M0 is driven by the tight pitch and the higher trench aspect ratio. Intel 18A supports an M0 pitch of 32 nm, although Panther Lake has only shipped with a looser 36 nm pitch. This is due to Intel’s heavy usage of HP libraries. Among leading-edge nodes, 18A has the loosest M0 pitches due to PowerVia. With power routing moving to the backside, congestion is reduced, and the entire front-side metal stack can be used for signal routing. M2 is the first true inter-cell routing layer. It runs horizontally like M0 but spans across multiple cells to carry block-level signals. The M2 pitch sets the cell’s track height – the number of M2 tracks that fit between the VDD and VSS rails, defining what the library calls a 6-track or 7.5-track cell. This layer is the most important, limiting the routing of entire blocks. SMIC N+3 features a 5.7-track cell. The M2 pitch is 40 nm, a 5% decrease over N+2 and the same as N6. This shrink keeps the pitch at the edge of what is possible with double patterning. Future nodes will need to increase the number of masks for M2 as reducing the number of tracks is much harder due to the limitations in routing. The micrograph above is in the perpendicular direction, the gate-cut, and shows metals 0 through 4. This allows us to see and measure the odd-numbered vertical metal layers. The M1 pitch is 38 nm, 9.5% less than N+2 and 33% less than N6. The M1-to-gate ratio matters because it sets local routing flexibility. N+2 and N+3 use a 3:2 ratio, while N6 uses a 1:1 ratio, explaining the huge differences in M1 pitch. The more M1 lines there are compared with the gates, the more flexibility there is for power and signal crossing within the cell. Routing flexibility enables more complex and better cells. Clean fractional ratios are also preferred as a grid is periodic and improves layouts. The 3:2 ratio gives SMIC more local routing flexibility than a strict 1:1 grid, but it also complicates layout and patterning. This is a DTCO choice, with SMIC increasing process complexity to recover density and routability without EUV. This 3:2 ratio is not very popular in the leading-edge nodes. TSMC has only used it on N7+, the N5 family, and the short-lived N3(B). They have switched back to a 1:1 ratio for N3E. Intel has only used it on the 10 nm/Intel 7 family, with Intel 4, 3 and 18A all using a 1:1 ratio. Samsung is the only one still using a 3:2 ratio at the leading edge, using it in the SF4 and SF3 families. It remains to be seen if SMIC will remain at a 3:2 ratio or move to a 1:1 ratio with its future nodes. The industry is still actively exploring these local-routing ratios. At VLSI 2026, imec will be presenting work on even higher ratios, including a 2:1 scheme that can reduce area by up to 14%. We will be covering the conference in a future newsletter article. Subscribe We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. The final local interconnect layer for N+3 is M3, with a pitch of 44 nm. The M3 pitch is the same as on N+2 and 10% larger than on N6. The semi-global layers carry the majority of block-level signal routing. They have a coarser pitch than the lower local layers. On leading-edge nodes, they are designed to sit at the limit of DUV single patterning. M4 through M11 pitches were found divided between 80–82 nm (M4–M6), 128 nm (M7–M10), and 148 nm (M11). Given limited sampling, it is possible these are divided further in dense routing areas. At the top are two giant metal layers, M12 and M13. These have kept the same pitches as N+2 at 1920 nm and 4600 nm respectively. While the lower layers’ pitches are generally fixed by the process and library, the upper layers vary much more in pitch and count, depending on the design. Even two smartphone SoCs on the same process can have wildly different metal stacks. The Helio G99 carries fewer routing layers, reaching coarse metal pitches of 850 nm by M9, while the larger and higher-performance Kirin 9030 keeps fine pitches until M11. SRAM At the leading edge, SRAM is much more difficult to scale than logic. TSMC’s latest nodes have seen little to no bitcell scaling, while logic still has more DTCO levers to pull. While looking for other logic libraries in the GPU compute units, we stumbled upon the SRAM. The most common type of SRAM has 6 transistors (6T), but this cell had 8 transistors (8T) instead. 8T SRAM adds two transistors to form a dedicated read port. Unlike a 6T cell, where reading disturbs the storage, the decoupled read port removes read-disturb, improving read stability and letting the cell be pushed harder for performance. At first glance, the cut looked like an unusual logic library, with each cell row having 3 fins of one polarity and 5 fins of another. The rows also alternated in orientation. Energy-dispersive X-ray spectroscopy (EDS) resolved our confusion. The cut had not landed on the GPU logic, but on the SRAM macro beside it. The unusual fin pattern was due to the SRAM library. We return to EDS in the process flow analysis behind the paywall. SRAM libraries are not like traditional logic libraries. Due to the unequal number of PMOS and NMOS transistors, they require specialized rules and layout libraries. They do not need the flexibility of logic libraries, so they are hyper-optimized for one purpose: dense, reliable memory. The SRAM cell we found is a 1:2:2-2:2 cell. This means there is 1 fin per pull-up (PU) PMOS transistor, and 2 fins per pull-down (PD) and pass-gate (PG) NMOS transistor. These 2 PU, 2 PD and 2 PG transistors would usually form a single 6T high-current cell (HCC). An 8T HCC adds a read-pull-down (RPD) and a read-pass-gate (RPG) NMOS transistor, each with two fins. We measured a cell height of 406 nm, which brings the bitcell size to 0.0463 µm². That is a theoretical peak density of 21.6 Mib/mm². We estimate that a 6T HCC would have a cell height of 292 nm and a size of 0.0337 µm². This is ~12% larger than a 6T HCC on Intel 3 and 4. We also estimate the 6T high-density cell (HDC) to have a cell height of 228 nm and a size of 0.0260 µm². This is coincidentally the same as the logic standard-cell height measured earlier. The estimate puts the cell near Samsung 7LPP/5LPP and slightly below TSMC N7/N6. That is a theoretical peak density of 38.5 Mib/mm². 6T HDC is arguably the most important cell as it is used for the largest caches in a chip, the L3 caches and system-level cache (SLC). Both the Kirin 9020 and 9030 have split the SLC into 4 banks to raise total SLC bandwidth. In the Kirin 9030, the SLC increased from 2 MiB to 3 MiB per bank. Correspondingly, the number of arrays within the bank also increased by 50%, from 16 to 24. Each array can store 128 KiB and forms an orderly pattern on the die shot. From the Kirin 9020 to the Kirin 9030, the area of a 128 KiB SLC array decreased from 0.0477 mm² to 0.0392 mm², an 18% shrink. The achieved density is 25.5 Mib/mm², 66% of the theoretical maximum. While the SLC was quite similar across both chips, the L3 has seen some major changes, particularly in terms of its layout. The total capacity also went up from 10 MiB to 12 MiB. Much like the SLC, the L3 is also split into 4 banks. In the Kirin 9020, an L3 bank consisted of 16× 128 KiB arrays and 16× 32 KiB arrays. However, an L3 bank in the Kirin 9030 instead consists of 48× 64 KiB arrays. In the Kirin 9020 L3, a 128 KiB array was 0.0513 mm² and a 32 KiB array was 0.0154 mm². The size of the 128 KiB array is different on the L3 and SLC as the assist circuitry for the two arrays differs depending on their purpose. In the Kirin 9030 L3, a 64 KiB array is 0.0210 mm². Although not a like-for-like comparison, normalized for capacity, it is 18% smaller than the 9020’s 128 KiB L3 array and 31% smaller than its 32 KiB L3 array. The achieved density is slightly lower than the SLC, at 23.8 Mib/mm², 62% of the theoretical maximum. Unlike the L3 and SLC, the prime cores’ private L2 cache uses a 2-bank design. As the prime cores’ L2 is latency-critical, it likely uses 6T HCC instead of 6T HDC. The 9020 has 16 arrays in each bank while the 9030 has 32. Each array has a capacity of 32 KiB. A 32 KiB array in the L2 shrank from 0.0171 mm² to 0.0142 mm², ~17% smaller. The density is 17.6 Mib/mm², ~59% of the theoretical maximum for 6T HCC. SRAM scaled well from N+2 to N+3, shrinking by ~19%, close to the theoretical logic shrink. The caveat is that N+2’s bitcells were unusually large, bigger than comparable 7 nm-class nodes, so part of the gain is catch-up rather than true scaling. With the insights from STEEL’s teardowns, we will be doing a deep dive into SRAM in a future newsletter article. Subscribe Everything above came out of a single STEEL teardown: die annotation, block-level area analysis and TEM cross-sections through logic and SRAM. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Future Roadmap The same cross-sections that pin down N+3 also show where SMIC can go next. Although N+3 is already close to the practical limits of DUV multi-patterning in several layers, SMIC still has a few scaling levers left. A theoretical N+4 would likely start with cell height. N+3 uses 5 M0 tracks between its power rails. Moving to 4 M0 tracks, as on SMIC N+2 and TSMC N6, could reduce cell height by roughly 15%. The routing grid is only one side of the shrink; the front end also must fit into the smaller cell. One possible FEOL lever is reducing the p-to-n isolation spacing from two diffusion grid units to one. Intel used this scaling booster on Intel 4, and TSMC did so on its N3 family. This path trades layout flexibility for density. Fewer M0 tracks reduce local routing resources, while tighter p-to-n spacing raises integration and design-rule difficulty. M2 is also constrained by the cell height shrink. For SMIC to maintain a ~5.7-track cell, M2 would need to move toward ~35 nm. That would move another layer into SAQP territory. SMIC could also reduce the CGP from 57 nm to 54 nm. Intel reached a similar CGP on Intel 10 nm/Intel 7 without EUV. The local interconnect is also tougher. If SMIC keeps the 3:2 M1-to-gate ratio, M1 would need to shrink to 36 nm and would likely require SAQP as well. If SMIC moves to a 1:1 ratio, M1 could relax to 54 nm, but it would give up routing flexibility. Under this theoretical path, we estimate that SMIC N+4 could reach a cell height of 198 nm and a CGP of 54 nm, implying a Bohr density of 137.8 MTr/mm², on par with TSMC N5 or Samsung SF4. However, the difficulty is cumulative. Each step is individually plausible, but together they make N+4 harder than the transition from N+2 to N+3. It will likely take longer, cost more, and carry less process margin. A theoretical N+5 would require a larger integration shift. One possible path is backside contacts (BSCon), moving power routing and source/drain contacts to the backside, which would reduce front-side routing pressure and enable another reduction in cell height. The front-side metal pitches could relax to reduce the process complexity. M0 would likely relax slightly to ~34 nm, and M2 and M4 pitches could relax further. CGP is unlikely to shrink much further. Even with EUV, 48 nm has been the practical limit for yield and process control. This approach would allow N+5’s cell height to fall to 170 nm and its CGP to 53 nm. This implies a Bohr density of 163.6 MTr/mm², on par with Intel 18A’s HP library. However, this would not make N+5 cost-competitive with the leading edge. It would reach a similar density through a much more expensive route. The integration difficulty rises sharply, with new process flows for backside alignment, wafer thinning, contact reveal, and backside metallization. Past this point, standard density and interconnect scaling become increasingly unattractive. That is where Huawei’s roadmap stops looking like a normal foundry roadmap and starts looking like a packaging roadmap. At ISCAS 2026, Huawei unveiled its tau (τ) scaling law, reframing process scaling in the time domain. τ is the time cost of data movement and processing: switching delays in transistors, RC signal propagation delays in circuits, compute, memory, and networking latency. Outside Huawei’s terminology, this is called system-technology co-optimization. This is Huawei’s answer to its lack of EUV lithography. Without EUV, planar density cannot keep pace with TSMC, Intel, or Samsung. If transistor density cannot shrink further, Huawei’s alternative is to shorten wires, reduce buffering, and stack logic vertically. “LogicFolding”, Huawei’s implementation of this new scaling idea, is, in practice, an aggressive 3D stacking approach. AMD V-Cache places SRAM above or below a CPU die. AMD’s MI350X places active interposer dies (AIDs) underneath accelerator and compute dies (XCDs), with the AIDs handling cache, IO interfaces, the network-on-chip (NoC) and embedded metal-insulator-metal (MIM) capacitors. With LogicFolding, parts of the same logic block are split across multiple active dies bonded face-to-face at ultra-fine pitch. This allows Huawei to shorten some critical paths and reduce buffer overhead, not merely add cache capacity or offload the IO and interconnect. Shortening wires is where the higher clocks come from. A large share of a modern core’s delay and energy budget goes into driving long interconnects and the repeater buffers along them. LogicFolding distributes a block’s critical-path gates across multiple stacked tiers bonded at a very fine pitch, so the bond interface behaves like an additional metal layer and the longest paths get shorter. That is how Huawei expects to recover frequency and efficiency it cannot get from the process alone. Huawei’s roadmap shows its intent. Prime core frequency is targeted to rise from 2.75 GHz in the Kirin 9030 to roughly 5 GHz by 2031, far beyond what planar scaling alone could deliver. Prime cores with 3.1 and 3.39 GHz clocks are being tested in its labs, although their power consumption is unknown. Beyond that, chips are in the design, simulation or pathfinding phase, meaning the frequencies are targets. However, the direction matters more: LogicFolding also helps with performance, not just density. The catch is that Huawei’s density claim is not directly comparable to foundry densities. A stacked design can report more transistors per package footprint by adding active layers, even if each patterned die remains well behind TSMC or Intel in front-end density. This is how Huawei can claim to reach foundry 14A-equivalent density by 2031. This is not a like-for-like foundry comparison, with Huawei using stacked logic and measuring density per package footprint. On a normalized Bohr-density basis, SMIC N+3 is ~114 MTr/mm², 38% less than Intel 18A’s HD library. Huawei’s 3D roadmap closes the gap by stacking active logic, reaching 215 MTr/mm² by 2030. In 2031, the roadmap density jumps to 295 MTr/mm², implying either a third active layer, partial EUV insertion or aggressive planar DUV scaling. Huawei’s methodology makes other foundries look much denser as well. Applying it to AMD’s MI450X with an N2 top die on an N3P base die yields a theoretical density of 460.2 MTr/mm² in 2026, compared with Huawei’s 295 MTr/mm² in 2031. This Kirin 9030 does not use LogicFolding, remaining in a conventional mobile SoC package. Instead, it forms the baseline for how far Huawei and SMIC can push planar scaling. Future teardowns of Kirin and Ascend chips will show both planar logic density and Huawei’s hybrid bonding solutions. Export controls changed China’s optimization problem rather than ending it. EUV restrictions raised the cost and complexity of leading-edge manufacturing without freezing it. SMIC reaches N6-class logic density through DUV immersion, SAQP and DTCO, while Huawei shifts more of the burden onto architecture, packaging and system-level integration. Future nodes will be tougher. N+3 still had room to tighten local metals and reduce cell height and CGP. Further scaling without EUV leaves fewer levers. More aggressive multi-patterning adds masks and overlay error. SMIC can keep pushing DUV, but each step will get more expensive and less forgiving. The design side is just as critical. Huawei had domestic EDA tools and flows before the Kirin 9030, with the Kirin 9000s, 9010 and 9020 making that clear. Huawei was able to ship multiple consumer SoCs on SMIC N+2 and N+3 while cut off from the Western EDA stack. US export controls restricted EDA tools for advanced chips in 2022 but did not target tools for more mature chips. In 2025, the US government briefly placed much broader restrictions on EDA software from Synopsys, Cadence, and others, before lifting them less than two months later as part of a trade deal tied to rare earths. Huawei has been unable to access those tools because it remains on a US trade blacklist. That forced Huawei, SMIC and Chinese academic institutions to build their own tools and flows. Researchers at Peking University recently announced a prototype EDA tool for Huawei’s LogicFolding architecture, which requires a new flow to handle the multilayer layout and floorplan. This is not the same as replacing the full Synopsys or Cadence stack, but it shows where domestic EDA is headed: toward tighter co-optimization between architecture, process and packaging. These advances are also diffusing into the Chinese ecosystem. SMIC is licensing its N+2 and N+3 processes to HLMC/Hua Hong at the government’s direction rather than by choice. If the same process learning feeds into Ascend accelerators for AI training and inference, the choke point shifts from one named fab to an ecosystem. Alibaba’s T-Head silicon arm and Cambricon, a Chinese AI chip designer that is expected to supply ByteDance, could also be major beneficiaries. Sanctions aimed at SMIC alone become less effective once the manufacturing knowledge has spread to other fabs and design houses. China is not closing the gap with Intel, Samsung and TSMC. The teardown shows the opposite in several places: no EUV, no backside power, higher process complexity, and visible trade-offs. But China is still advancing. If domestic chips become good enough for phones, inference, networking and security-sensitive workloads, they can matter strategically without matching TSMC at the leading edge. Behind the paywall, we show what else STEEL can do, with material and process flow analysis of SMIC N+3, and analysis of the Kirin 9030 package. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline, access the full Kirin 9030 and SMIC N+3 analysis or to commission a custom teardown, contact sales@semianalysis.com.
Longtime locally owned Lexington furniture store going out of business
Burke Furniture has been in business in the same spot off Richmond Road for 63 years. The building has been sold.
Residents can get a look at new Talent Health Center in late June
Rogue Community Health helps lead effort; onsite weekly food pantry operates through ACCESS Rogue Community Health is offering the public a chance to tour its new clinic in Talent. The […]
Huge development as Richard Hughes secures deal for forward
Liverpool has become renowned as one of the finest finishing schools for young talent around. The progress made by Rio Ngumoha - and to a lesser extent Trey Nyoni - pays testament to that. Both are we...
New York's victorious Knicks leave World Cup in the cold
The World Cup carnival arrived in New York on Saturday, but it was drowned out by the city's elation after the hometown Knicks broke a 53-year curse to win the NBA Finals.- No 'big buzz' - In an industrial section of Brooklyn, the manager of an indoor five-a-side arena said ahead of the Knicks win that "obviously the Knicks, as they should, are over-shining" the World Cup.
See photos from the 2026 Miss Mississippi pageant coronation
A new Miss Mississippi was crowned during the pageant's coronation at the Vicksburg Convention Center in Vicksburg, Miss., on Saturday, June 13, 2026.
SBA moves to revise 8(a) rules while preserving tribal, ANC eligibility
Details By Brian Edwards Native Contracting June 13, 2026 The U.S. Small Business Administration has proposed changes to its 8(a) Business Development Program that would eliminate race-based presumptions of social disadvantage for individually owned businesses while leaving eligibility standards unchanged for tribally owned enterprises, Alaska Native corporations and other Native entity-owned participants. In both the title and summary of the proposed rule published in the Federal Register, SBA emphasized that the changes only apply to individually owned firms and “do not impact entity-owned firms,” including tribes, Alaska Native corporation, Native Hawaiian organizations and community development corporations. The proposed rule, announced June 11, would require all individual applicants seeking admission to the 8(a) program to submit evidence demonstrating social disadvantage. Membership in a racial or ethnic group alone would no longer establish eligibility, according to the SBA. For Indian Country, the agency said eligibility standards for businesses owned by federally recognized tribes, Alaska Native corporations, Native Hawaiian organizations and community development corporations would remain unchanged. The proposal comes after the Department of Defense reaffirmed that participation by tribes and Alaska Native corporations in the 8(a) program is based on their political status under federal law rather than diversity, equity and inclusion initiatives. In a May 28 letter to Alaska's Republican Sens. Lisa Murkowski and Dan Sullivan, Under Secretary of Defense for Acquisition and Sustainment Michael P. Duffey wrote that participation by federally recognized tribes and Alaska Native corporations in federal programs is “grounded in their political status as Native Americans, not DEI initiatives.” The SBA proposal follows a 2023 federal court ruling that found unconstitutional the program's rebuttable presumption that members of certain racial and ethnic groups were socially disadvantaged. SBA Administrator Kelly Loeffler said the proposed rule would establish a single standard for individually owned applicants by requiring evidence of social disadvantage. The 8(a) Business Development Program provides participating firms with business development assistance and access to federal set-aside and sole-source contracting opportunities. The program remains a major source of federal contracting revenue for tribal enterprises and Alaska Native corporations. Native-owned firms received $16.1 billion of the program's approximately $26 billion in federal contract awards during fiscal 2024, according to data previously reported by Tribal Business News. The proposal also arrives amid ongoing concerns from Native contractors about SBA administration of the program. In May, the Native American Contractors Association and 53 Native-owned businesses urged SBA to address delays in processing 8(a) applications, saying some reviews had stretched beyond regulatory deadlines and appeared to have stalled since August 2025. The proposed rule is open for public comment through July 13. The Federal Register notice does not reference tribal consultation or indicate whether SBA determined consultation was unnecessary because tribal eligibility standards are unchanged. The SBA has not announced when the proposed rule would take effect. The agency is expected to accept public comments before issuing a final rule.About The AuthorAuthor: Brian EdwardsBrian Edwards is associate publisher and associate editor of Tribal Business News and Native News Online. He is a longtime publisher, editor, business reporter and serial entrepreneur. Subscribe Today!Other Articles by this authorDefense Department reaffirms tribal, ANC eligibility in SBA 8(a) programTribal heritage projects eligible for up to $100K in federal funding through NPS programIHS launches tribal long-term care construction initiative with three projectsIḷisaġvik College acquires site for long-planned Utqiaġvik campus This article is available to paid digital subscribers. Click here to sign in or get access.
Family-owned Hartford business reopens after pipe burst, ceiling collapsed
HARTFORD, Conn. (WTNH) — After a pipe burst in February, Refuge Tattoo and Taza Cafe was closed indefinitely. Now, the Hartford shop is reopening its doors. On February 6, water came pouring in and…
Westport racism lawsuit adds claim that KC helped keep out Black-owned businesses
The evolving lawsuit alleging racism and racketeering in Westport now targets city government directly.
Mamdani's NYC World Cup Jerseys Sold Out in Less Than an Hour—Giving a Family-Owned Business a Boost
When Mazzi Sports teamed up with Mayor Zohran Mamdani to produce a collection of city-centric kits, no one expected thousands of football fans to line up.
Simple ways to support Black owned businesses daily
Juneteenth is a great time to start, but supporting Black owned businesses year round strengthens your community.
Eagles Sign Offensive Lineman Michael Jordan and Defensive End A.J. Epenesa
Jalen Hurts and the Philadelphia Eagles will not reconvene until training camp in late July after ending mandatory minicamp on Wednesday. The mandatory veteran minicamp took place at the Jefferson Health Training Complex, with players' sights set on their eventual Week 1 matchup against the Washington Commanders. A.J. Brown was still an Eagle when he married Kelsey Nicole Riley on May 16 at the Montage Laguna Beach, a property owned by current United States Ambassador to Italy and Houston Rockets owner Tilman Fertitta.
They’re here, they’re queer, they’re in the kitchen: LGBT+ food businesses
Celebrate Sacramento Pride with a guide to LGBT+-owned food spots, producers and allies across the region, including Midtown, Davis, Lodi and Nevada City.
District 1 Supports Small Businesses with Live Music Summer Series
To kick off Pride Month, District 1 Councilmember Dr. Sukh Kaur filed a Council Consideration Request (CCR) today to designate a portion of North Main Avenue as “Erica Andrews Memorial Way” to honor the life and legacy of the internationally-renowned transgender performer.
Middle TN hemp business to close and relocate out-of-state due to new state regulations taking effect in summer 2026
“Sadly, these laws feel like they were designed to stamp out small, family-owned businesses like ours,” the business said.
Dems press DOD, DOJ on criminals ending up with Army munitions
The Lake City Army Ammunition Plant, located near Kansas City, Missouri, is a government-owned but privately operated factory
Papa Johns shuts down dozens of locations across 17 states as fast-food competition intensifies
Papa Johns follows through on plans to close 300 stores, targeting franchise-owned locations generating less than $600,000 in annual sales by 2027.
9 local businesses to support before Pride Month ends
With Pride Month in full swing, there are many ways to support businesses owned by and catering to the LGBTQ community.
Leon County ends minority- and women-owned business program
Leon County commissioners voted to end a program for minority and women-owned businesses due to a new state law.
PARAGON SPORTS- Specializes in NYC
Paragon Sports, New York City's independently owned Sports Specialty Store, today announced a series of in-store transformations and brand partnerships that underscore the company's strategy as the definitive sports specialty retail authority of New York City. The announcement coincides with the company being voted the #1 Sporting Goods Store in the United States by the USA Today Readers' Choice Awards.
Business Restructuring Review Vol. 25 No. 3 May-June 2026
In This Issue Texas Bankruptcy Court Adopts Barnet Rule Requiring Foreign Debtor to Have U.S. Assets to Be Eligible for Chapter 15 Relief In In re Siu-Fung Ceramics Holdings Limited, No. 24-33299, 2026 WL 382424 (Bankr. S.D. Tex. Feb. 10, 2026), the court denied petitions for chapter 15 recognition of Hong Kong bankruptcy and liquidation proceedings commenced on behalf of an individual debtor and a group of companies that he owned or controlled. According to the court: (i) the corporate debtors' Hong Kong liquidation proceeding was not eligible for chapter 15 recognition because the attorney retainer upon which such relief was based was not funded until nine months after the chapter 15 petition date; and (ii) the individual debtor's Hong Kong bankruptcy case could not be recognized because the debtor's "center of main interests" on the chapter 15 petition date was not in Hong Kong, and he did not even maintain an "establishment" there. [read more …] Southern District of Texas Clarifies Post-Purdue Course for Consensual Third-Party Releases and Gatekeeping Provisions In In re Container Store Group, Inc., 676 B.R. 356 (S.D. Tex. 2026), appeal filed, No. 26-20166 (5th Cir. Apr. 14, 2026), cross appeal filed, No. 26-20166 (5th Cir. Apr. 24, 2026), the U.S. District Court for the Southern District of Texas addressed consensual third-party releases and gatekeeping provisions in the aftermath of the U.S. Supreme Court's ruling in Harrington v. Purdue Pharma L.P., 603 U.S. 204 (2024). Consistent with existing Fifth Circuit precedent, the court confirmed that, in appropriate circumstances, consent for third-party releases may be obtained through a creditor's failure to opt out of granting that consent. But, the court ruled, consent through an opt-out mechanism essentially can never be inferred for creditor classes that stand to receive no recovery under a chapter 11 plan and that are deemed to reject the plan by operation of applicable bankruptcy law. Instead, those classes must affirmatively opt in to any release. The court also narrowed and remanded the bankruptcy court's acceptance of a broad gatekeeping provision, ruling that such provisions must correspond to the restrictions established by Fifth Circuit precedent. [read more …] Delaware Bankruptcy Court: Initial Transferee Need Not Be Defendant in Fraudulent Transfer Avoidance and Recovery Litigation The Bankruptcy Code gives a bankruptcy trustee the power to avoid asset transfers that are either made with the intent to defraud creditors or that are "constructively" fraudulent because an insolvent debtor did not receive adequate value in exchange. The Bankruptcy Code also permits recovery of an avoided transfer from not only the initial recipient, but also from subsequent transferees. Courts disagree over whether a transfer must actually be avoided before the trustee can seek recovery from a subsequent transferee and whether the initial transferee must also be a defendant in the recovery litigation against a subsequent transferee. The U.S. Bankruptcy Court for the District of Delaware weighed in on this debate in Phillips v. SS Associates LLC (In re ONH AFC CS Investors, LLC), No. 23-10931 (CTG), 2026 WL 312892 (Bankr. D. Del. Feb. 4, 2026). The court adopted the majority view, ruling that the initial transferee need not be a defendant in avoidance and recovery litigation against a subsequent transferee, but that the trustee must establish the elements necessary to avoid the initial transfer as part of the recovery litigation. [read more …] New York Bankruptcy Court Weighs In on Adequate Assurance of Future Performance under Assigned Leases and Chapter 11 Plan Exculpation Provisions In order to assume and assign an executory contract or unexpired lease, a bankruptcy trustee must cure most defaults under the agreement and provide "adequate assurance" of the assignee's future performance. However, the Bankruptcy Code provides no guidance as to the meaning of "adequate assurance" other than with respect to shopping center leases. In In re Broadway Realty I Co. LLC, No. 25-11050, 2026 WL 147505 (Bankr. S.D.N.Y. Jan. 19, 2026), the U.S. Bankruptcy Court for the Southern District of New York examined this issue in connection with a proposed assignment of thousands of residential leases as part of a free-and-clear sale of debtors' properties. The court held that "adequate assurance" does not mean a guarantee of the assignee's future performance, but merely demonstration that the assignee has the ability to satisfy the underlying obligations. The bankruptcy court also ruled that an exculpation provision in the debtors' chapter 11 plan exonerating non-estate fiduciaries from liability for actions taken in connection with the chapter 11 case was unobjectionable, provided it was limited in scope to postpetition conduct and actions taken in connection with implementation of the plan after its effective date. [read more …] Newsworthy Corinne Ball (New York) (Hall of Fame), Bruce Bennett (Los Angeles), Carl E. Black (Cleveland), Jeffrey B. Ellman (Atlanta), Brad B. Erens (Chicago), Gregory M. Gordon (Dallas), Heather Lennox (Cleveland/New York), Joshua M. Mester (Los Angeles), and Kevyn D. Orr (Washington) were included in the 2026 edition of Lawdragon 500 Leading Bankruptcy and Restructuring Lawyers. The Daily Business Review selected Isel M. Perez (Miami) as an "On the Rise" winner for the Florida Legal Awards. The Florida Legal Awards annually recognize those who have made significant contributions to the legal industry in Florida. Dan T. Moss (Washington/New York) was inducted as a Fellow in the 37th Class of the American College of Bankruptcy at its Annual Meeting in March 2026 in San Antonio, Texas. Christine Borries (Munich) was ranked in the practice area Restructuring/Insolvency in the 2026 edition of Chambers Germany. The 2027 edition of The Best Lawyers in Singapore™ recognized Sushma Jobanputra (Singapore) in the practice area Insolvency & Reorganization. The restructuring transaction involving Eissmann Automotive North America, Inc. received the "2025 Turnaround of the Year (Large Company)" at the Turnaround Management Association (Detroit) Annual Awards Reception. T. Daniel Reynolds (Cleveland) and Nick Buchta (Cleveland) represented subsidiaries of Eissmann Group Automotive in connection with the parent company's German insolvency proceedings. Roger Dobson (Sydney) is among 40 Jones Day lawyers recognized by The Best Lawyers in Australia 2027 for his contributions in Banking and Finance Law; Distressed Investing & Debt Trading; Insolvency and Reorganization Law; Litigation. An article written by Corinne Ball (New York) titled "Ard Finance—A Global Enterprise Combining an LME With a Foreign Insolvency Proceeding and Chapter 15" was published in the April 21, 2026, edition of the New York Law Journal. An article written by Alex Sapp (New York) titled "Recent Developments in Section 510—Subordination" was published in the 2025 edition of the Norton Annual Survey on Bankruptcy Law. An article written by Brad B. Erens (Chicago) titled "New York Bankruptcy Court Approves Insider DIP Litigation Financing" was published on April 6, 2026, by Lexis Practical Guidance. An article written by Corinne Ball (New York), Dan T. Moss (Washington/New York), David S. Torborg (Washington), and Isel M. Perez (Miami) titled "New York District Court Affirms Narrow Scope of 'Public Policy Exception' in Chapter 15 Cases" was published on April 6, 2026, by Lexis Practical Guidance. An article written by Jeffrey B. Ellman (Atlanta) titled "Statutory Cap on Lease Rejection Damage Claims in Bankruptcy Applies to Solvent Debtors" was published on April 6, 2026, by Lexis Practical Guidance. An article written by Trisha L. Mowbray (Real Estate; Chicago) and Ryan Sims (Washington) titled "Chapter 11 Plan that Abridged Non-Debtor Lessee's Rights to Remain in Possession After Rejection Unconfirmable as Having Been Proposed in Bad Faith" was published on April 6, 2026, by Lexis Practical Guidance. Lawyer Spotlight: Ben Rosenblum Ben Rosenblum, a partner in the New York Office, represents debtors, creditors, and other parties in out-of-court restructurings and court-supervised proceedings, including chapter 11 cases, municipal bankruptcies, international insolvency matters, and stockbroker liquidations. His experience spans industries such as manufacturing, shipping, mining, aviation, energy, real estate, and telecommunications. Ben's notable debtor representations include Peabody Energy, the City of Detroit, Chrysler LLC, Spansion Japan, and Dana Corporation. Significant creditor representations include General Maritime Corporation, Calpine Corporation, American Home Mortgage, and Murray Energy. He currently represents creditors in Puerto Rico's restructuring. He also has extensive experience advising financial institutions on bankruptcy law as applied to derivatives.
Cooper Flagg named to inaugural Time list of the 100 most influential people in sports
Cooper Flagg continues to put Maine on the map, as the recently-crowned NBA Rookie of the Year was named to Time Magazine's inaugural list of the 100 most influential people in sports.
Tacoma’s Grit City Books is your favorite bookseller’s favorite bookstore
Open for only two years, the "unapologetically queer-owned and queer-positive" Grit City Books in Tacoma has become a favorite among Seattle booksellers.
Minority-owned businesses surge in Kansas City despite headwinds
In May, the Kansas City-based Ewing Marion Kauffman Foundation released a nationwide 30-year report on entrepreneurship.
Steve Rao: The AI revolution must include Main Street
Whether it is a family-owned manufacturer exploring automation, a local retailer adopting AI-powered marketing tools or a startup building the next generation of innovative products, small businesses will be among the primary beneficiaries — and users — of AI.
Local small business “pop up" in downtown Atlanta thanks to unique program
The World Cup is about to bring visitors from around the globe to Atlanta — and more than a dozen locally-owned businesses are ready to take advantage of the tourism to grow their brands.
10th annual Charlottesville-Albemarle Black Business Expo set for June 20
The Expo, in its 10th year, celebrates Black-owned business and will host over 40 vendors, three panel discussions, live entertainment, and a business pitch competition.
Front Porch Forum could become employee-owned when its founders retire
Michael and Valerie Wood-Lewis, who founded Front Porch Forum in 2000, are exploring the possibility of selling the company to its employees when the couple is ready to retire.
Small Business Spotlight: Dog-Eared Books
Main St. is home to many local businesses, including the only locally owned bookstore in Ames. Dog-Eared Books has been open since March 8, 2021. They offer a wide variety of books, community events and a small cafe section. The business is owned by Amanda Lepper and Ellyn Grimm, both originally from Ames and both...
Tony Awards 2026: Bess Wohl's Pulitzer-Prize-winning 'Liberation' is crowned best play
'Liberation,' Bess Wohl's playful imagining of her mother's feminist consciousness-raising group in 1970s Ohio, deservedly wins the Tony for best play
Winner and Loser of the Week in Florida politics
The Governor's race gets shaken up, Senate leaders protect schools, and Anthony Sabatini gets clowned.
Alan S King
Scope of work: King chairs the firm’s national labor and employment practice, advising Fortune 500 companies, municipalities and minority-owned businesses in employment litigation. He also serves as first deputy general counsel and is a certified mediator and arbitrator with the American Arbitration Association.Significant case: He secured victories for employers, including United Airlines and Michigan TV station WZZM, winning summary judgment in discrimination and retaliation claims.Other contributions: King is president of the board of Children First Fund, supporting Chicago Public Schools, and is a producer of the Chosen Few Picnic & Festival.
Vikings-Backed Girls Flag Football Is Taking Off in Minnesota
In a matter of days, Minnesota will see its newest girls’ flag football champion crowned. After officially commencing play in […]
Politics Unusual: NYC Deputy Mayor for Economic Justice, NJ primary race discussion
In this episode of Politics Unusual, FOX 5 NY's Morgan McKay speaks to Julie Su, the city's Deputy Mayor for Economic Justice, about Mamdani's plans for city-owned grocery stores. Also, a conversation about two of New Jersey's primary races.
Blue Fox Entertainment Acquires iPic Theaters in Los Angeles and Manhattan
Blue Fox Entertainment Group announced Friday its acquisition of two cinema locations previously owned and operated by iPic Theaters.
Webster Town Board votes to remove Pride flag raised at town hall this week
The board says the American flag and the New York state flag will be the only ones displayed on properties owned by the town of Webster.
Black businesses as community anchors: History, economic power, and the fight to reserve it
Black-owned businesses play a vital role in building community wealth, jobs, and opportunity. Join Brookings for a discussion on new research, business ownership parity, and strategies to strengthen Black business ecosystems.
Power lines down along Pelham Road leads to power outage at business
Downed power lines along Pelham Road in Greenville has led to a power outage at at least one business.
Destiny 2 Ending New Content Is "Unthinkable," Warframe Dev Says
Bungie recently announced that it is ending ongoing content releases for Destiny 2 on June 9, with the Sony-owned studio shifting to new projects. The end-of-service announcement was upsetting to many, including Warframe creative director Rebecca Ford. She said on the OnlyFrames podcast that there is “no world where it makes sense.” “Obviously, that news...
Riverhead Votes to Proceed with Science Center Condemnation
In a 3-1 vote Tuesday afternoon (Councilman Bob Kern abstained), the Riverhead Town Board voted to proceed with condemnation proceedings against a building owned by the Long Island Science Center adjacent to the planned Town Square on East Main Street. Town Supervisor Jerry Halpin cast the sole vote in opposition. Pictured Above: Cindy Clifford, Joan
PlayStation Showcase Twitch Chat Spammed By Destiny 3 Fans
#wewantDestiny3 was a ceaseless battle cry on the Amazon-owned platform's livestream of the event
ROI-NJ launches inaugural Family Business of the Year Awards; nominations now open
ROI-NJ has launched its inaugural Family Business of the Year Awards program honoring New Jersey family-owned businesses. Nominations are now open for the Oct. 15 event in East Hanover.
The small business making big investments to deliver advanced defense technologies
Employee-owned Physical Sciences Inc. has been scaling small business government R&D awards to solve some of the thorniest national security challenges.
A guide to the bookstores owned by your favorite authors
Ann Patchett opened Parnassus Books in 2011 when physical bookstores seemed endangered.
Kimball-Cooke Insurance of Athol marks 90 years in business
Kimball-Cooke Insurance, a locally-owned and community-involved business in Athol since 1936, offers a wide range of insurance products and services to its customers in the North Quabbin region.
Why a Chinese-owned company is bringing factory jobs back to the U.S.
GE Appliances is a poster child for the president’s promised manufacturing revival. But tariffs are making it harder to onshore jobs.
Moore announces $3 million in aid to help small- and minority-owned business in Maryland
Some small- and minority-owned businesses in Maryland will be able to get some investment help from the state.
Two Black women-owned businesses recognized during small business month
PSG vs. Arsenal live updates: Champions League final predicted lineups, preview
Europe's best team will be crowned on Saturday.
Callaway’s Yard & Garden announces retirement, closing after 72 years in business
A longtime family-owned garden center in Madison County is preparing to close its doors after more than seven decades in business.
Quartet of firms guide $17.6bn Caesars Entertainment acquisition
Latham, Skadden, Freshfields and White & Case score roles in deal that will see casino giant's acquisition by conglomerate owned by billionaire Tilman Fertitta
ABC stations call FCC's early call for license renewal 'unconstitutional'
ABC-owned TV stations across the U.S. are criticizing the Federal Communications Commission for an early review of their broadcast licenses.
Caesars Entertainment board agrees to acquisition by Golden Nugget owner
Harrah’s, owned by Caesars Entertainment, may soon have a new owner after Caesars announced it entered into an agreement to be acquired by Fertitta Entertainment Inc.
Fertitta Entertainment to control four of nine casinos in Atlantic City after deal to buy Caesars for $17.6 billion
Tropicana, Harrah's, Caesars and the Golden Nugget will now be owned by one company.
Preview: Expectations mount for UNC's Fall sports in 2026
Dubbed “the University of National Champions,” with 52 team national titles across eight different sports, UNC athletics has long been defined by excellence and expectation. Heading into the 2026 season, here’s a look at some of UNC’s most renowned programs.
‘A lot of potential’: Downtown Las Vegas hotel is sold, eyed for upgrades
Las Vegas hotel, once owned by the late Tony Hsieh, has been sold
Fertitta-Owned Firm to Buy Caesars Entertainment in Nearly $18 Billion Leisure Push
May 28 (Reuters) - Caesars Entertainment said on Thursday it will be bought out by Tilman Fertitta-owned firm in a $17.6 billion deal, as the hospitality billionaire looks to expand his leisure empire. The deal, which will take one of the Las Vegas Strip's most prized casino operators private,
Control Without Ownership: How China's Party-Business Networks Dominate Indonesia's Mineral Supply Chains
In 2024, when Jiangsu Delong, the world’s second-largest stainless-steel producer, filed for bankruptcy, several Chinese firms and state-owned enterprises
Opinion | When local businesses matter most
At a locally owned business, decisions are made right here, by people who know the customers by name and understand that a business is not just a line on a spreadsheet. It’s part of a community.
Brooklyn Park Fulfillment Company Named Veteran-Owned Small Business of Year
KSP Fulfillment has been named Minnesota's Veteran-owned Small Business of the Year by the U.S. Small Business Administration.
Millender Center’s retail businesses asked to leave
The Bedrock LLC-owned Millender Center, built in the 1980s immediately across from the RenCen, is emptying of tenants.
Café Corazón named 2026 Small Business of the Year
A locally owned Latin and Indigenous cafe was named Small Business of the Year by the Greater Kansas City Chamber of Commerce.
After overhaul, feds seek to reauthorize minority, women-owned business program
There are 13,533 Virginia vendors certified as SWaM (small, women-owned and minority-owned) and DBE (disadvantaged business enterprise) as of 2024.
Medical spa owned by US senator hit with multiple lawsuits over poor mammography quality
Plaintiff attorneys have filed at least three proposed class-action lawsuits against the Greenbrier Clinic in Sulphur Springs, West Virginia.
Army veteran’s archery business named Veteran-Owned Small Business of the Year
Army veteran Sam Westfall turned archery into a source of healing and community. Now, his business, Valor Archery Challenge, has been named Veteran-Owned Small Business of the Year.
WATCH: Asian-owned business celebrates 50 years in Tempe
Little Szechuan started out as the Szechuan Inn in 1976. Five decades later, its food, small business atmosphere and owners still bring the community together.
84-year-old’s tuxedo business, passions keep him busy
“My life has been a series of accidents,” is Tom Ryersbach’s description of how he arrived in Williamsport and stayed, but listening to the interesting turns his life has taken, it seems they are more like opportunities and not accidents. Ryersbach, who will turn 85 in November, has owned and operated Levinson’s Tuxedos at the […]
Maine Senate candidate Graham Platner stands by ad accusing Red Sox private equity owners of ruining the team
The ad was pulled by New England Sports Network, which is owned predominantly by Fenway Sports Group, a conglomerate that also owns the Red Sox and Liverpool of the Premier League.
Casper’s family-owned Brattis Meat Market celebrates 80 years of business
CASPER, Wyo. –– A Casper institution is marking eight decades of business this year, tracing its roots to two brothers looking for job opportunities after
Mayfield-Graves County Senior Center fundraiser auction to feature food, entertainment
The Mayfield-Graves County Senior Citizens Center will host impersonators, an artist and a world-renowned auctioneer for its June fundraiser auction.
Croma Skincare – Where Science Meets Skin
LEOBENDORF, Austria, May 26, 2026--With Croma Skincare, Austrian family-owned company Croma Pharma translates decades of expertise in aesthetic medicine into a modern skincare line designed for everyday results. Rather than following short-lived trends, Croma focuses on scientifically proven ingredients and pharmaceutical-grade formulations that deliver visible performance while fitting seamlessly into daily routines.
Man arrested for posing as fire system inspector, targeted minority-owned businesses
Fire investigators say Wesley Shaw ran an unlicensed business called Tennessee Fire Specialty Systems, where he posed as a licensed fire inspector to business owners. He charged hundreds of dollars per inspection for inspections he wasn’t qualified to perform.
5 more things to know about 3 hospitals’ $250M case against CVS
Last week hospitals owned by three big health systems filed suit against CVS Health. The trio filed separately, but all accuse the corporation of robbing them of funds they’re owed through the federal 340B drug pricing program.
Veteran-owned business gifting custom fishing rods to Gold Star families
Matt Moore, a veteran and owner of Hellbender Outfitters in Elizabethton is giving back to families with lost U.S. service members.
Workers At TheGamer Say Site’s New Pay-Per-Session Contract Is ‘Heartbreaking’
Under a new payment system, writers at Valnet-owned TheGamer would no longer be guaranteed consistent pay for their work
Carver State Bank expands to Atlanta and Birmingham, strengthens small business lending
Carver State Bank is expanding into Atlanta after acquiring a branch in Georgia’s capital city. Bank president and CEO Robert James says the move builds on the bank’s Birmingham expansion and growing focus on small business lending, underserved communities, and strengthening Black-owned banking across the Southeast.
The best sports bar in America is in Northeast Ohio: USA Today readers
The locally owned chain first opened in 1983.
Facebook group supporting Black-owned businesses grows into real-world community hub | ChicagoNOW
What started as a Facebook community has helped raise more than $100,000 for local Black-owned businesses. Now, the movement is expanding with a new collaborative space called “The Aux.”
Latino-owned businesses grow, but venture capital remains an issue
“Latino-owned businesses rose by nearly 48% between 2017 and 2023,” said Marketplace senior economics contributor Chris Farrell.
Health Officials Are Perplexed By Hawaiʻi Snorkeling Deaths
Snorkeling claims the lives of dozens of tourists each year. Some who lost loved ones or nearly drowned themselves say not enough is done to warn people of the risks.
China’s machinery giant XCMG eyes bigger scoop of global sales
State-owned firm banks on intelligent manufacturing, green technology, product integration and digital services to boost sales overseas.
A Democrat Took on Red Sox Ownership in an Ad. A Network Pulled it.
Graham Platner, a Senate candidate in Maine, blamed private equity for destroying “our favorite baseball team.” NESN, which is owned by the team, pulled his campaign ad, citing an intellectual property violation.
Five must-watch matches on Premier League final day
The final day of the Premier League season is here and could prove to be quite a hectic one.Arsenal may have already ended their agonizing 22-year wait to be crowned champions after Wolves and Burnley...
K&M Landscaping and Retail celebrates 30th anniversary
A local, family-owned business celebrated its 30th anniversary on Saturday in Eau Claire.
Trump administration releases $40 million for Colorado water project
The Trump administration on Friday released $40 million, clearing the way for a water district and its partners to finish funding the purchase of some of the state’s most senior Colorado River water rights, Gov. Jared Polis announced. Federal funding for the Shoshone water rights owned by Public Service Company, a division of Xcel Energy, […]
AANHPI Local Business Spotlight
To celebrate AANHPI month, Utah Royals FC players surprised some of their favorite Asian owned businesses with free ticket vouchers to Utah Royals games that customers can claim when they visit. The Japanese quartet of Mina Tanaka, Aria Nagai, Narumi and Miyabi visited Koyote (551 W 400 N, SLC, UT),
Riverhead Board Unswayed By Public Objections to Taking of Science Center Property
The Riverhead Town Board seemed unmoved by hours of comment at a public hearing Wednesday evening on its plan to take the property adjacent to the Town Square owned by the Long Island Science Center through eminent domain. In 2020, the Science Center had proposed to build a new 24,000-square-foot, $13.5 million attraction at the
McKinsey studied 200 family business successions. The biggest problem wasn’t the heir — it was the outgoing CEO
New research across 50 countries finds family-owned businesses underperform for five years after a leadership transition — and the culprit is usually the person leaving, not the person arriving.
Eastern Iowa woman sentenced for stealing more than $500K from veteran-owned business
A Springville woman was sentenced Thursday to more than three years in federal prison for stealing more than $500,000 from a veteran-owned small business in Marion.
Music venue District 142 brightens Downriver's entertainment scene
The independently owned 3-year-old club attracts music fans of all genres with its eclectic calendar, clean facility and reasonable prices.
Music venue District 142 brightens Downriver's entertainment scene
The independently owned 3-year-old club attracts music fans of all genres with its eclectic calendar, clean facility and reasonable prices.
How to watch Ottawa vs. Montreal in Game 4 of PWHL Finals: Time, TV, streaming
The Montreal Victoire are one win away from being crowned the 2026 PWHL Walter Cup champions. Can the Ottawa Charge stave off elimination again?