SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " READI " 1,254 found 🔀 AI-powered Shuffle
The best sporting events on TV this weekend
If you’re reading this then you’re probably well on your way to enjoying a relaxing holiday weekend. The Fourth of July always delivers a wide array of sporting entertainment to watch and this year comes with the added bonus of…
What’s Going Around in Metro Detroit: Heat exhaustion, skin rashes, bug bites and gastrointestinal illnesses
Here’s our weekly round-up of what illnesses are spreading the most in Metro Detroit communities, according to our local doctors and hospitals.
Long Reads for the Long Weekend
(Welcome to the Entertainment Strategy Guy, a newsletter on the entertainment industry and business strategy. I write a weekly Streaming Ratings Report and a bi-weekly strategy column, along with occasional deep dives into other topics, like today’s article. Please subscribe.) Happy Fourth of July weekend! As has been a tradition of mine going back to the beginning of the EntStrategyGuy website, I’m sharing my favorite long reads of the last year, like I did in 2019, 2020, 2021, 2024, and 2025. Let’s dive right in! Subscribe “Different Prices for the Same Ride: How Uber and Lyft Use AI to Get More Money Out of You“ by Derek Kravitz in Consumer Reports I don’t think surveillance pricing, like the kind described in this brilliant Consumer Reports article, is long for the world—it’s toxically unpopular—but we’ll see if either party takes on this issue. If I ran a political party focused on affordability, I would focus on a few pro-consumer and pro-market policies: Banning non-compete agreements. Ending surveillance pricing Eliminating junk fees (read more here...) Ensuring “right to repair” for consumer (and military!) products Capping excessive app store fees Stopping digital/algorithmic price-fixing tools. Preventing automatic subscription price increases. And more. If you want to fight inflation, there are a lot of great ways to do it quickly. Speaking of higher prices... “Secret Documents Show Pepsi and Walmart Colluded to Raise Food Prices Across the Economy“ by Matt Stoller in BIG Again, I think a political party should focus on lowering prices for consumers. And deals like this—Walmart making a deal/forcing Pepsi to offer the lowest prices at its stores and nowhere else—hypothetically lower prices at Walmart...but raise them everywhere else. “15 DUIs, still driving: California’s failure to take repeat drunk drivers off the road“ by Robert Lewis and Lauren Hepler in CalMatters CalMatters does terrific reporting in California, something the Golden State desperately needs more of, and this article is a great example of that. “PugLips: The next insanely popular thing you’ve never heard of…” by Simon Carless in Game Discover Co I thought that this parody article (and yes, it’s a parody, but I was definitely unsure at first) was hilarious and totally nailed how much tech/business journalism feels these days. Actually, three of my favorite articles this year were on hype in the video game industry, including Georg Zoller’s “The Video Game Industries Very Dark Night”—which I linked to recently and wrote a follow-up here—and Owen Mahoney’s “Derek Zoolander, Videogame Exec”. In particular, I like Mahoney’s focus on user experience as a guide to what trends will actually grab hold of customers. “The Matrix Lies“ by Evan Shapiro in Media War & Peace Evan Shapiro’s first person account of his experience with AI was hilarious. I think LLMs capabilities have significantly grown from last summer, and yet...my editor/researcher just had an abysmal experience using an LLM to do a quite basic task (which our LLM normally does each week) and the LLM made a mistake on every single data entry...along with seven different mistakes affecting twelve of the twenty or so entries, including mistakes that are explicitly spelled out in the prompt. That’s a brutal failure rate. Again, if you use AI/LLM for data collection, you need to take a lot of extra steps to verify and check the data. “Ghosts in the Balcony: A Cross-Country Trip to 58 Theaters Fighting to Survive“ by Matthew Frank in The Ankler I thought Matthew Frank’s pitch to head across America to visit theaters sounded insane aggressive at the time—at least it felt that way to someone a decade older than him; man, to be in your twenties again, am I right?—but I knew the result would be great. And it was, a terrific feature by a great young writer. Also, I loved Matthew’s recent article on who’s getting the precious few entry level jobs in Hollywood. (Hint: nepotism.) “Disney erased FiveThirtyEight“ and “Did Las Vegas get too greedy?” by Nate Silver in Silver Bulletin I love media history and analysis, and there’s no one better to get the history of FiveThirtyEight than from Nate Silver, who wrote about his personal experience in one of my favorite pieces from this year. I also loved Nate’s breakdown of what’s causing Vegas’ woes, but I’ll offer one criticism, summarized as “Might I suggest antitrust?” Many centrists/center-right/libertarian thinkers (Nate is self-described as the latter) often don’t consider consolidation or antitrust as factors in policy issues like housing, America’s military readiness, or, in this case, Las Vegas. Even if libertarians want to debunk antitrust/consolidation concerns, I’d love to read that debunking. In this case, Vegas is incredibly consolidated (though it also has been for a long time) and I’d have loved to read Nate at least contending with this factor, since he addresses almost every other potential factor for Vegas’ decline. “Why Microsoft’s Carbon Removal Pullback Is Such a Big Deal“ by Robinson Meyer in Heatmap News I’m a big supporter of carbon removal efforts, but this nascent industry faces a lot of headwinds, including this big move most recently. I think it’s clear that solar panels and batteries should be able to get the world to its carbon footprint goals, but effective carbon renewal remains necessary to prevent the worst impacts of global warming. “AI is killing the cheap smartphone“ by David Oks LLMs and AI will impact the world in ways we’re not ready for, and already, third world countries are seeing the prices of cheap cellphones skyrocket due to the cost of chips skyrocketing. This article by David Oks is a terrific breakdown. “100 Days of Madness: Netflix, Paramount, Warner and the Future of Hollywood“ by Wade Major at Hollywood Heretic Wade Major dove deep into Hollywood/streaming’s financials in this must read piece. Not that I agree with everything in this article (read my take on Warner Bros./Paramount here) but the analysis is top notch. I think many people discount how quality thinking, regardless of the argument/conclusion, will make you a better thinker. “Erased by the UFC: Frank Shamrock, The MMA GOAT of the 20th Century“ by Nate Wilcox in The MMA Draw Newsletter Growing up playing the UFC fighting game on the Dreamcast, Frank Shamrock was my favorite MMA fighter, and this history/tribute to him was great. Other Fun Reads “The Hardest Part Of History To Tell Is How It Felt“ by Craig Fehrman at Defector “Unmasking the Sea Star Killer“ by Craig Welch at bioGraphic “What Could Save the Industry? Fin-Syn“ by Richard Rushfield in The Ankler Alex Rollins Berg in Underexposed on movie bumpers, pillow shots, Disney trash cinema, cult films, and Casablanca. David H. Montgomery in YouGov’s The Surveyor on punctuation marks, condiments, dinosaurs, and comic strips and kids media. “How Medium finally pivoted its way to profitability“ and “Why the best journalists on YouTube are all former Vox employees“ by Simon Owens in Simon Owens’s Media Newsletter “It’s Not Just You, Netflix Shows Have Gotten Slightly Shorter: Here’s What the Data Says“ by Kasey Moore at What’s on Netflix “Numlock Awards: How Diane Warren became the biggest loser in Oscar history“ by Nathaniel Rakich and “Numlock Awards: The Oscar Bait era is over. The Oscar Chum era is here.” by Walt Hickey & Michael Domanico at Numlock Awards
LSU Health Shreveport to host College and Healthcare Readiness Bootcamp
College and Healthcare Readiness Bootcamp to be hosted by LSU Health Shreveport.
LSU Health Shreveport to host College and Healthcare Readiness Bootcamp
College and Healthcare Readiness Bootcamp to be hosted by LSU Health Shreveport.
LSU Health Shreveport to host College and Healthcare Readiness Bootcamp
College and Healthcare Readiness Bootcamp to be hosted by LSU Health Shreveport.
Wayne County health officials track 27 potential cyclosporiasis cases amid growing Michigan outbreak
Wayne County health officials say they are tracking 27 potential cases of cyclosporiasis as part of a growing intestinal illness outbreak spreading across southeast Michigan.
Small Business Job Openings Rebound
Texas Border Business AUSTIN, Texas – NFIB’s June Jobs Report shows that the Small Business Employment Index remained essentially flat, registering 100.2 in June after measuring 100.3 in May. This is the fourth consecutive month the Index declined. The current reading is below the 2025 average of 101.2 but still slightly above the historical average of 100.0. In June, […]
Massachusetts Chooses Literacy Over Union Politics
Governor Maura Healey signs a major education reform bill, showing that even blue states can stand up to teachers’ unions.
Apple Readies New iPad Pro, Redesigned Entry MacBook Pro for 2027
Apple Inc. is preparing an upgraded iPad Pro line and a redesigned entry-level MacBook Pro for next year, adding to a slate of several other major new products planned for the iPhone’s 20th anniversary year.
WHO Health Emergencies EPI-WIN webinar: Strengthening the governance of national public health agencies for emergency preparedness and response
This webinar will provide a platform to present the main findings of the cross-country study on governance of National Public Health Agencies for emergency preparedness and response and bring country perspectives from different governance models on how governance arrangements shape emergency action in practice.
Wright State President Sue Edwards Named to Dayton Business Journal’s Power 100
One hundred area leaders are being recognized for helping shape the Dayton region’s growth over the last 25 years. Continue reading →
Private sector added 98,000 jobs in June, below expectations, ADP says
The figure reported on Wednesday is below economists’ estimates of an increase of 118,000 jobs. The prior month's reading was unrevised at 122,000.
Berks LaunchBox announces winners of lifestyle business pitch competition
Three entrepreneurs took home prizes of up to $1,000 for their startups.
Servers recalled after glitch results in radiologists reading images for wrong patients
The issue could cause a reader to unintentionally report on the wrong patient when using interactive applications, according to a notice from the FDA.
Live Updates: Supreme Court Rules on Banning Transgender Athletes From Women’s Sports
The court’s decision involving laws from West Virginia and Idaho has implications for 25 other states with similar restrictions. Times reporters are reading it and providing analysis.
Cyclosporiasis cases on the rise in Monroe County, health officials say
An outbreak of Cyclosporiasis is spreading in Monroe County, health officials announced on Monday.
Watch out, Amazon: the Kobo eReader now has a Goodreads rival
Kobo users can now automatically sync their reading progress to StoryGraph, making it easier to track books, reading stats, and challenges without relying on Amazon’s Goodreads.
Jesus Rally Provides Afternoon Of Entertainment
Keep reading this and dozens of other stories for only $10. Cancel immediately or enjoy local daily news for…
Doctors thought man had brain cancer — they found live tapeworms instead
Doctors suspected metastatic brain cancer in a 60-year-old man, but scans revealed pork tapeworm larvae causing neurocysticercosis.
Dayton Business Journal: Former Ohio State, Arizona State administrator named Wright State athletic director
Following the university’s first-ever national search for a Division I athletics director, Wright State University has selected a new leader for its athletic program. Wright State has named Brad Chandler as the next director of athletics. “I am incredibly grateful … Continue reading →
How South Dakota schools are shifting to 'science of reading'
South Dakota is retraining teachers in the 'science of reading' to help students master foundational skills. Here’s how.
Benchmark Scores Don’t Break. Clinical Reality Does. The Health AI Readiness Illusion.
Nature Medicine's frontier AI evaluation exposes a dangerous gap: models acing medical benchmarks collapse under adversarial pressure, and the FDA has no…
Read Michener’s ‘Centennial’
If you’ve been reading my columns, you’ve noticed I’m basically illiterate. I blame my dyslexia and public education, but my Olympic-level laziness could be the driving factor. Anyway, I basically can’t read (and, still, I graduated from CU Boulder, so another endorsement of public higher education). So, for me to recommend a book is like […]
Fallout from USMNT loss to Turkey and previewing the Mbappe-Haaland clash
On today’s show, we look back at the United States’ final group stage match against Turkey and evaluate their readiness for the Round of 32. Manchester City insider Sam Lee joins us to preview the tournament’s first true superstar heavyweight clash as Kylian Mbappe and France square off against Erling Haaland and Norway in a battle for Group I supremacy. Plus, The Athletic’s Jay Harris is back in the studio to break down the latest bracketology, advancement percentages, and qualification permutations for Groups G, H, and I using The Athletic’s World Cup Tracker.
Meet a scientist tracking invasive reptiles, and even their parasites
An insider's look at Florida’s war on invaders: the giant snakes, egg-eating predators and parasites spreading through the Everglades.
This Week's 10 Must-Read Stories on Women in Politics: Title IX Anniversary, AI's Anti-Women Bias and Ranked-Choice Voting Victories
Weekend Reading on Women’s Representation is a weekly compilation of stories about women’s representation in politics, on boards, in sports and entertainment, in judicial offices and in the private sector in the U.S. and around the world—with a little gardening and goodwill mixed in for refreshment! Published every Friday. —This week marked the 54th anniversary of Title IX. —As the Taliban approaches the five-year mark of its return to power this August, a rare protest in western Afghanistan last week laid bare both the brutality of its rule and the resilience of those living under it. —A woman will replace Eric Swalwell in California … but for not two more months. —A study of 133 AI systems found that 44 percent demonstrated gender bias, and more than a quarter showed both gender and racial bias. ... and more.
50 Cool Charts That Will Make You So Much Smarter
Reading this is like going to college in five minutes.
Trump tries out midterms message that focuses on ‘communists’
Trump warned an audience of religious conservatives that communism is spreading in the U.S., a new theme for his midterm campaign.
Summer Science Program
Explore information about the Summer Science Program at Arkansas Children's Hospital, a career readiness program for college students, including eligibility and how to apply.
Andy Cohen cries as he mourns 28-year-old 'WWHL' producer who died of brain cancer
Andy Cohen became emotional mourning 'Watch What Happens Live' production manager Kyra Samson, 28, who died of brain cancer earlier this week.
Remigration: a growing far-right movement
Once a fringe position, calls for mass deportation are spreading throughout Europe and entering mainstream politics
Texas school board to vote on required Bible readings in public education
If approved by the Texas State Board of Education, which is controlled by Republicans, the reading list would take effect in 2030.
Ball State Teacher Preparation Programs Earn Top Ratings in Science of Reading Reviews
By Ball State Communications— MUNCIE, Indiana — Ball State University’s elementary education, early childhood education, and special education teacher preparation programs have earned top marks in two reviews focused on how well future educators are prepared to teach reading through evidence-based,
Braille is literacy: Rice researchers are reshaping the science of reading
As schools across the country increasingly embrace evidence-based approaches to reading instruction through the science of reading, two Rice researchers are leading an effort to ensure students who learn through braille are not left out of the research shaping literacy education.
Small Creatures, Big Mission: NMHM Bugapalooza 2026 Connects Science and Military Readiness
Mosquitoes, ticks, flies, and pollinators drew a crowd at the National Museum of Health and Medicine's Bugapalooza on June 13. Nearly 400 visitors attended the annual event to explore the world of insects through hands-on activities, exhibits, and conversations with military and civilian experts.
Evaluating the robustness and readiness of large frontier models in health AI applications
Nature Medicine - Adversarial evaluation of leading AI models uncovers gaps between benchmark success and robustness, highlighting limitations in current health AI benchmarks and their ability to...
Making Our Own Luck
We are cross-posting a piece that former NIH official Kris Willis wrote for Macroscience. Kris is now the President and Founder of the Woodley Park Institute, for which I’m a board member. Picking winners or hedging bets? Federal science agencies have long wrestled with the question of how to ensure their billions of dollars of grants and contracts result in maximum benefits for Americans. On the surface, it might seem that a goal-oriented, interventionist style of management would be the best policy: prioritize our most pressing problems and distribute funding accordingly.This top-down strategy creates a unique hazard, though: bad choices can send resources in the wrong direction, resulting in slow progress that impedes the delivery of tangible benefits to citizens. Moreover, if decision makers pursue an applied advance when the underlying scientific principles remain poorly understood, they risk costly failures and a loss of support for the research enterprise at large. Examples include Nixon’s 1971 War on Cancer, undertaken on the premise that a cure could be achieved in less than a decade, the drive to build an operational commercial fusion plant by the mid-1990s, and the National Plan to Address Alzheimer’s Disease, which failed to produce the effective treatments and prevention strategies promised by 2025. The contrasting laissez-faire approach is to hedge your bets. If the path to an advance is impossible to predict, then the wisest choice might be to distribute funding to as widely as possible. The main risk of this strategy is that spreading funding thinly may limit the resources available to the most promising research, resulting in the same negative outcomes as the interventionist approach: limited support for the most promising topics, slow progress, and delayed returns. In reality, at science agencies like the National Science Foundation and National Institutes of Health, program managers navigate between these two extremes, setting some funds aside to target high-priority areas and using the rest to cover the widest possible range of meritorious proposals. This middle path seems like the most rational way to proceed, but it still requires making choices. How much should be set aside for high priority topics? What should those topics be? How should we define merit? Expert opinion can provide a helpful guide, but leading experts can have remarkably different opinions about what matters and what should be prioritized. Moreover, experts and administrators alike can be risk averse, giving an edge to high-profile, well-established concepts. What’s really needed is a data-driven framework to help guide decision-making, one that doesn’t simply repackage prestige or incumbency. Recognizing breakthroughs years in advance Many breakthroughs fail to attract funding or recognition at the earliest stages of development. Katalin Karikó, for example, spent years struggling to win grants for work on mRNA that would eventually win her and Drew Weissman a Nobel Prize. Similar stories can be told about Jim Allison’s groundbreaking studies leading to the development of cancer immunotherapy, Stan Pruisner’s demonstration that prions can self-replicate without DNA, or Robin Warren and Barry Marshall’s proof that Helicobacter pylori, not stress, causes ulcers. Yet at some point, the scientific community recognizes and responds to transformative breakthroughs like these. How does that change happen? And what if science funders could identify the areas that are on the cusp of a breakthrough? Those questions led my collaborators and me to study how scientists responded to past breakthroughs. Based on patterns in that data, we developed a means of predicting future breakthroughs, using biomedicine as a proof of concept. It’s worth taking a moment to describe how our approach works. Briefly, our prediction process begins by grouping the 18 million or so peer-reviewed papers in PubMed, the authoritative database of biomedical research, into roughly 50,000 unique topics. A small subset of these topics are so widely acclaimed as breakthroughs that they have been recognized with a major prize like a Nobel or a Lasker Award. We theorized that studying the development of these outliers over time, especially before they gained acclaim, was the key to identifying future instances of them. After defining topics, we chose 21 representative breakthroughs and asked what they looked like before they won prestigious prizes. To answer that question, we re-ran our topic-mapping algorithm repeatedly, winding back the clock one year each time, stringing together the years to follow the progress of each field as it grew and advanced. We found that in each case, the years leading up to a discovery followed a pattern: a burst of papers on a new, rapidly evolving topic, many of which quickly became influential. These characteristics—the percent of papers that are new, the percentage of papers that are brought in from other topics, and the influence of each individual paper—can all be measured separately for any given topic. Together, they act as a predictive signal that is detectable an average of five years before a transformative discovery is made, and up to thirty years before the discovery receives a major prize. Scanning the current research landscape for topics that display this signal allows us to predict what work will likely produce a future breakthrough. Each year we analyzed includes four or five signals, a number that appears to have remained constant across a twenty year time frame. In their classic work on the sociology of science, Bruno Latour and Steve Woolgar established that the desire to participate in a major discovery is an important motivator for scientists as they consider whether they should take up (or abandon) a research problem. Although further work is needed, the simplest explanation for our results is that this behavior is widespread enough to detect at scale. A foundational advance, or something like it, draws the attention of scientists and causes them to change the direction of their research. They vote with their feet, staking their own reputation and careers by publishing on and citing the new idea. That upswell of interest is the foundation of our breakthrough signal. What kind of research does our model identify as a breakthrough? After building a model based on the patterns in our 21 preselected breakthroughs, we tested it by identifying all early signals of discovery from 1994 through 1997. Of the 18 signals we found in that time period, 17 can be traced forward in time to a breakthrough. Examples include super-resolution fluorescence microscopy (see the image above), the directed evolution of proteins and enzymes (Chemistry Nobel, 2018), and sequencing the human genome (National Medal of Science, 2008). The discovery of the role of leptin signaling in obesity is a particularly interesting case study. Around 1950, scientists noticed the existence of a type of lab mouse that suffered from a unique inherited form of obesity. When given the freedom to choose their own diet, these mice ate more than normal and preferred food that was high in fat. Researchers had few clues as to why the animals overate; early experiments pointed to the existence of a soluble ob factor found circulating in the bloodstream that regulated appetite, but its identity was unknown. In 1994, Jeffrey Friedman and colleagues identified and sequenced the ob gene, noting that the protein it encoded appeared to fit the profile of a circulating factor. A year later, a trio of high-profile publications demonstrated that ob was a hormone that regulated body weight and fat deposition by regulating appetite. One of these was co-authored by Friedman, who christened it leptin from the ancient Greek word for thin. Using our model, the data from 1996 make it clear this advance would become a breakthrough. Scientists had flocked to study the biology of the new hormone, generating the flurry of new papers and citations required to produce a signal. One of these demonstrated that serum leptin concentrations reflected the amount of adipose tissue in the human body, providing clinical validation of the earlier mouse studies. Before the identification of leptin, scientists were unable to point to a specific molecule that controlled appetite and adiposity, so that it was impossible to rule out non-physiological causes of obesity; its characterization fundamentally changed our concept of weight gain. In 2010, Friedman and fellow pioneer Douglas Coleman were awarded a Lasker for the discovery. Our work also identifies breakthroughs in clinical practice and behavioral and social sciences, even though these areas are less likely to draw the attention of major prize committees. One example that falls into this category is the introduction of endovascular aneurysm repair, a minimally invasive surgical procedure for the treatment of abdominal aortic aneurysm, a leading cause of death among Americans over the age of 65. Relative to the previous standard of care, it reduces in-hospital mortality by almost four-fold. In 2017, Timothy Chuter received the American College of Surgeons’ prestigious Jacobsen Innovation award for his multiple refinements to the technique. Another under-recognized breakthrough identified by our model is the development of standardized survey instruments to assess the quality of life for HIV+ patients. The antiretroviral cocktails introduced in the mid-1990s reduced AIDS mortality, but treatment came with serious side effects. The new evaluations showed that patients whose disease progressed had worse physical functioning than Americans with other chronic diseases, while those who were asymptomatic maintained a health-related quality of life on par with the overall US population. This evidence made it possible for patients and activists to argue that even in the absence of a total cure, and in spite of the side effects, alleviation of symptoms was a worthwhile priority for clinicians. My colleagues and I have failed to identify any significant recognition for the physicians and health policy experts who pioneered this advance, although in 2016, researchers called for the World Health Organization to set targets for good health-related quality of life as part of its framework to end the AIDS pandemic. From forecasting to funding How should science funders use our predictions? Any serious discussion of what we should do with this new capability needs to begin with an understanding of its limitations. We can’t (and shouldn’t) invest all of our resources in the small number of topics predicted to produce breakthroughs. Innovative new fields are born from existing ones; they rarely arise de novo. If funders don’t maintain a diverse portfolio, the breakthroughs of tomorrow will have no antecedents. Think of this as eating the seed corn, or killing the goose that lays the golden egg. There are also multiple goals of funding beyond basic scientific discovery, including translating discoveries into clinical practice, developing new technologies, supporting economic development, and training new scientists. The investments needed to accomplish these goals are likely different from those required to support emerging breakthroughs. Finally, we must be aware that we may not capture every instance of a breakthrough. The concept is fuzzy, and not every significant discovery is recognized with a major award. Further, breakthroughs are rare, meaning that our dataset is, by necessity, small. This makes formal estimates of accuracy challenging. Although our overall success rate appears to be high, any one signal may turn out to be a false positive. We found one apparent example: the development of the third generation COX-2 inhibitors, Vioxx and Celebrex, which were much celebrated in the early 2000s as effective but non-addictive pain relievers, meets all the algorithmic criteria of a breakthrough. Five years after it received FDA approval, researchers demonstrated that Vioxx was associated with serious cardiovascular complications, and the manufacturer voluntarily pulled the drug from the market. Celebrex remains available, although like other NSAIDs, it carries an FDA warning for increased cardiovascular risk. Decision makers who were overly focused on the breakthrough potential of this research might have wasted substantial resources nurturing an area that ultimately proved to be a failure—but so would those who relied on expert opinion at the time. That said, the potential benefits of funding the next mRNA vaccine or cancer immunotherapy years earlier than we might have are large. When we can’t assume the outcome of an action, it’s worth conducting an experiment. Can targeted support for areas that are poised to produce a breakthrough increase the return on scientific investment without cannibalizing future advances? With the necessary administrative infrastructure in place, conducting this experiment would be straightforward. First, identify all the breakthrough signals between 2018 and 2023, select half at random, and commit to a decade of investment. For biomedicine, a six year window should yield about 30 topics with the potential to produce a breakthrough. Providing strong support to half of these might be accomplished for $300 million a year. That’s roughly half of the recent annual budget of the NIH Common Fund or around 20% of the fiscal year 2025 budget for ARPA-H. After five years, then again at ten, compare to see which group — the one that was actively managed, or the control — produced more breakthroughs, and on what timescale. Although we used biomedicine as an example, the same experiment could just as well be run for physics, materials science, or any other discipline. Any attempt to undertake such an experiment should keep three points top of mind. First, we can predict the topic of future breakthroughs, but the people and vision for how to move the work forward are still important. In practice, this means success requires active program managers with the expertise to develop the science and the authority to do so, including by recruiting investigators. Second, we would be wise to learn from the failures of past attempts to fund transformative research. High among these are funding modestly repackaged work, confusing the genuinely novel with the merely unfamiliar, and relying too much on incumbent investigators. All of these risks can be mitigated by thoroughly and intelligently integrating high quality data into portfolio management. Finally, we need to have patience. Even with strong funding support, producing a breakthrough takes time. If supporting breakthroughs is the best way to nurture the birth of new fields, we also need to accurately describe and properly manage the other two stages, so that we invest wisely throughout the productive lifetime of ideas and divest once they reach the point of diminishing returns. We would benefit from more study of all of these phases, especially the transition from one to another. More research could answer questions like: When does a breakthrough become an established field? How do the availability of funding, the size and characteristics of the available workforce, and the accumulation of evidence that disagrees with prevailing models affect a field’s decline? Exactly how do old ideas give birth to new ones, and can we speed up the process? The more we understand about the dynamics of scientific progress, the better we can maximize the odds that our curiosity leads to results. I’d call that finding a way to make our own luck.
Comcast's Sky to Buy ITV's Media and Entertainment Unit for $2.1 Billion
Comcast-owned Sky Group has reportedly agreed to acquire the media and entertainment business unit of U.K.-based ITV for $2.1 billion. The deal is expected to be officially announced in two weeks. Satellite operator Sky will absorb ITV’s broadcast network, linear free-to-air channels, and the ITVX subscription streaming service with 900,000 paid subscribers and 16.4 million … Continue reading "Comcast’s Sky to Buy ITV’s Media and Entertainment Unit for $2.1 Billion"
Ball State Teacher Preparation Programs Earn Top Ratings in Science of Reading Reviews
Ball State University’s elementary education, early childhood education, and special education teacher preparation programs have earned top marks in two reviews focused on how well future educators are prepared to teach reading through evidence-based, scientifically grounded instruction.
Around the MHS
This edition of news from around the Military Health System for the week of June 22-26, 2026, includes a vital partnership between Offutt Air Force Base and the American Red Cross, new Uniformed Services University research on stress fractures, and Naval Medical Research Unit EURAFCENT participates in a multinational readiness exercise.
Celebrating the Science of Reading Award
"Our school district leaders and teachers deserve tremendous credit for this achievement and their continued commitment to improving literacy skills."
Men’s Health: Caring for the Body, Mind and Spirit
FORT POLK, La. — Seeking help is often viewed as a vulnerability in military culture, but healthcare providers at Bayne-Jones Army Community Hospital are reframing it as a tactical strength. In observance of Men's Health Month, a BJACH family physician, a mental health provider and the hospital chaplain have partnered to deliver a unified message: peak military readiness requires actively maintaining the body, mind and spirit. From utilizing routine screenings to leveraging physical discipline to build mental resilience and cultivating a strong spiritual community, the team outlines actionable steps to overcome the physical, emotional and isolation barriers that uniquely impact men.
Books for Better Health: Can Parent Beliefs About Reading Affect Health Outcomes?
A new research study looking at shifts in parental beliefs about books, reading frequency, and health outcomes was launched at a free Scholastic book at Yale
Priorities for Military Health System: ‘Our mission is readiness’
Keith Bass, assistant secretary of war for health affairs, outlines his strategic priorities for the Military Health System, with funding and staffing at the top of the list to optimize warfighter readiness.
How This Common Painkiller Is Stopping Cancer From Spreading, Scientists Reveal - Futura-Sciences
Guess Who? The Painkiller Hiding a Secret Weapon Riddle: it’s in countless family medicine cabinets. It’s the go-to when fever or pain strikes. For more than half a century, scientists have known about its anticancer properties. Some even believe it might lower the risk of metastases—those are the little troublemakers...
N.C. A&T College of Education Earns Top National Rating in Science of Reading Teacher Preparation
The undergraduate elementary teacher preparation program in the College of Education (CoEd) at North Carolina Agricultural and Technical State University has earned an A+ rating from the National Council on Teacher Quality (NCTQ) for how well it prepares future teachers to teach reading to elementary students.
Can Canadian Organizations Deliver in the Next Era of Business AI? IBM Finds Many May Not Be Ready
As Canadian CEOs accelerate AI adoption to drive productivity and growth, C-suite leaders across Canada warn that governance, oversight and workforce readiness are struggling to keep pace, creating a widening 'control gap.'
Wright State University and Premier Health – Nursing and Health Careers Camp teaches high school students about healthcare careers
High school students from around the country learned lifesaving skills and explored careers in healthcare during Wright State University and Premier Health’s Nursing and Health Careers Camp. Continue reading →
A Submarine Found Something Strange On The Ocean Floor
A submarine named Ran was sent below the ice shelf in Antarctica and found some strange readings before disappearing entirely. Here's what it found.
A Submarine Found Something Strange On The Ocean Floor
A submarine named Ran was sent below the ice shelf in Antarctica and found some strange readings before disappearing entirely. Here's what it found.
Letter: Missouri teachers need education in the 'science of reading' for kids
I give Avery Frank a grade of B for his op-ed "Teacher preparation in Missouri getting a failing grade" (June 18.) I have a special interest in reading preparation, as
'Leviticus' finds hope in the horrors of gay conversion therapy
Spoiler alert! We're discussing major details about the ending of “Leviticus” (in theaters now). Stop reading if you haven’t seen the film and don’t want to know.
More than 70 medics infected with Ebola as DRC outbreak spreads ‘fast’
Aid cuts and poor sanitation are deepening fears that Ebola is spreading through displacement camps.
Citizen Science Lab’s new home brings hope to Herron Avenue corridor
The Citizen Science Lab expanded into the newly renovated, previously long-abandoned Martin Luther King, Jr. Reading and Cultural Center in the Hill District.
Potawatomi Ventures launches business program for Native entrepreneurs
Bwadwét Innovation Community is offering a new entrepreneurial training program for members of the Forest County Potawatomi, with classes ranging from marketing to legal readiness to financing.
Christian Science Reading Room Returns To Westport
Addition nearing completion on Compo Road
The “Science of Learning” Is Less Controversial Than It Used to Be
A new report tackles the challenge of integrating the science of learning into the routines, systems, and structures that shape teachers’ daily work.
Messi family gives health update on Leo's father, slams invasions of privacy
While the Messi family confirmed that the star player's father is in delicate health, they also slammed those spreading rumors about the situation.
Sennheiser Joins the Open Wireless Earbud Craze
If you're reading this in the United States, though, we have some bad news.
If AI Is Sentient Then So Is ‘Age of Empires II’
“The point of the paper is to formally show that we anthropomorphise too readily."
Nancy and the politics of deterrence: reading the French nuclear offer to Poland
A year after the Nancy Treaty, Polish-French defence cooperation is deepening and building a tangible element of European deterrence. The question is what kind of relationship Warsaw and Paris are actually building, and whether it will outlast the leaders who started it.
This reading list ends the faith vs. science war
While two books in the 1800s invented the myth that science and religion are in conflict, these 20 modern books debunk it.
Discovery Supercomputer’s first applications selected for Day-One Science
Scientific computing experts at the Department of Energy’s Oak Ridge National Laboratory have selected the first nine research projects that will run on Discovery, the nation’s next flagship supercomputer, slated for deployment in 2028. The projects will be developed through the Discovery Center for Accelerated Application Readiness program at ORNL’s Oak Ridge Leadership Computing Facility. The program is designed to ensure that a suite of leading-edge scientific applications is optimized and ready to deliver results as soon as Discovery becomes operational.
Discovery Supercomputer’s First Applications Selected for Day-One Science
Scientific computing experts at the Department of Energy’s Oak Ridge National Laboratory (ORNL) have selected the first nine research projects that will run on Discovery, the nation’s next flagship supercomputer, slated for deployment in 2028.The projects will be developed through the Discovery Center for Accelerated Application Readiness (CAAR) program at ORNL’s Oak Ridge Leadership Computing Facility (OLCF).
A deadly fungus that can infect cats and people is spreading
It’s just a matter of time before Sporothrix brasiliensis reaches the U.S. a CDC expert says.
Local healthcare executive to lead 2026 Kern County Heart and Stroke Walk and county-wide push for CPR readiness
Bakersfield, Calif., June 17, 2026 — According to the American Heart Association, 9 in 10 people who suffer cardiac arrest outside of the hospital die, and more than half don’t receive bystander CPR. CPR — especially if performed immediately — can double...
Science show brings STEAM demonstrations to Bee County summer reading program
Children and families attend the Daniel G. Benes Science Show, hosted by the Joe Barnhart Bee County Library’s summer reading program on June 11 at the John C. Fulghum Event
Merchants of Doubt and the attacks on Extreme Event Attribution science
Last week, I attended a meeting at Columbia University on attribution science and climate law, hosted by the Sabin Center. It was a fantastic event, bringing together scientists and legal experts working at the intersection of extreme event attribution and climate law. Subscribe For those unfamiliar with it, extreme event attribution attempts to quantify the contribution of climate change to an extreme event. For example, several groups analyzed the impact of climate change on Hurricane Harvey’s enormous rainfall totals over Houston, Texas and they found that climate change increased rainfall by 15 to 38%. One thing that came up again and again was how terrified fossil-fuel interests are of extreme event attribution science. They are acutely aware that this research could land them in court. And losing those cases would leave them legally liable for billions of dollars in climate damages. Because the legal stakes are so high, the blowback has turned ugly. I spoke with several scientists at the meeting who are facing ongoing harassment over their work. This blowback is a coordinated campaign to make the entire field look suspect. The goal is to create the impression that attribution science is too uncertain, too political, or too conflicted to be useful in court or in public policy. The strategy is not based on actual science or evidence of misconduct, but on the generation of doubt. The new Merchants of Doubt We’ve seen this before. In fact, not that long ago: We only have to go back a year to the Department of Energy (DOE) Climate Working Group (CWG) report to see an example of using doubt as the tool to push back against well-established science. This strategy is laid out in an email from a member of the CWG, Dr. Roy Spencer, that was released during litigation over the Climate Working Group process. The key quote is: About all I can hope is that what we write will provide sufficient “reasonable scientific doubt” regarding the science claims in the 2009 TSD [technical support document], based upon almost 2 decades of new science, to call into question the original reasoning for the EPA Administrator’s decision that CO2 presents a threat to human health and welfare. This statement is strong evidence that at least some members of the committee were working to support a particular policy outcome: revoking the Endangerment Finding. The email also explains how they planned to do it: by attempting to generate “reasonable doubt”. This is going to be hard, Spencer implies. Despite falsely claiming that “2 decades of new science” weakens the case, Spencer explicitly acknowledges that the actual peer-reviewed science of climate change overwhelmingly rejects his position: But if the science argument is decided upon by a vote, or by the number of published citations, we lose the science argument. We can go back even further: This CWG email shares unmistakable DNA with the infamous 1969 tobacco memo that declared: “Doubt is our product, since it is the best means of competing with the ‘body of fact’ that exists in the mind of the general public. It is also the means of establishing a controversy.” The tobacco memo also acknowledges the limit of this strategy: Like the CWG, they knew the science was not on their side. Share The new new Merchants of Doubt The people attacking the IPCC chapter on extreme event attribution are the newest iteration of the Merchants of Doubt. Their goal, like all Merchants before them, is to introduce doubt into the process. Because the report is not even out yet, they cannot attack its conclusions. So they are attacking the authors instead. Here is a press release from the House Science, Space, and Technology Committee: In the letter, the Chairmen express concerns about potential conflicts of interest involving members of the Attribution Committee, stating that “publicly available information suggests a troubling pattern” in which committee members are affiliated with nonprofits that support climate accountability lawsuits, “raising the appearance of impropriety and member bias.” To be clear, this is just innuendo. There is no actual evidence of bias. And given the robust process that these reports go through, including multiple lines of peer review, it seems very unlikely that significant bias can survive into the report. When the report comes out, critics will have the opportunity to make legitimate criticisms of the report — if any exist. If none do, however, they’ll still make criticisms, but they’ll be bogus, simply designed to generate doubt. We’ll see. A note to the press: Fix your frame To any journalists reading this: The public debate over extreme event attribution science is not going away. The science is simply too dangerous to fossil-fuel interests for them to stop fighting it. You very well might be assigned to write an article about this area of research in the future. When you do, do not automatically adopt the framing that climate misinformers want you to use. They want you to frame the story around questions like: Are climate scientists trying to put their thumb on the scale to achieve a predetermined, politically motivated result? Are climate scientists improperly letting their politics invade the science of the IPCC? That frame is a trap. Instead, you need to view this through the historical lens of the Merchants of Doubt. How does the ecosystem of doubt operate? Who funds it? What methods do they use to misrepresent science and slime researchers? What scientific results are they trying to keep people from understanding are legitimate? Ultimately, you instead need to focus your article on the generation of doubt as a way to maintain the fossil fuel industry’s social and legal license to keep burning oil, gas, and coal. If you treat the misinformers’ frame as a legitimate, good-faith scientific critique, you are helping them produce doubt. Don’t do it. Don’t be a Merchant of Doubt. Thanks for reading The Climate Brink! Subscribe for free to receive new posts and support our work. Subscribe other stuff The Staying Curious Substack has an interesting post about the different flavors of climate sensitivity. This is crucial information if you want to understand how scientists think about how much warming the Earth will experience. I’d be grateful if you could hit the like button ❤️ below! It helps more people discover these ideas and lets me know what’s connecting with readers.
The Courtroom Battle Over Baby Formula Isn’t About Science
A jury in a Cook County, Illinois, court awarded families $70 million in April after concluding that infant formula caused a devastating illness in premature babies. However, that conclusion hinged on a scientific theory that lacks validated evidence. While the U.S. Food and Drug Administration said its recent study of chemical contamination in infant formula produced by Abbott Laboratories … Continue reading "The Courtroom Battle Over Baby Formula Isn’t About Science"
Iowa emerges as key player in aerospace
Iowa's aerospace industry attracts companies with skilled workforce, low costs, and site readiness, making it a top choice for expansion.
UToledo Earns National Recognition for Preparing Future Teachers in Science of Reading
Undergraduate and graduate early childhood education degree programs achieved top marks in a new report from the National Council on Teacher Quality.
Thanks For Making Me 12th Highest on Substack’s List Of “Rising” Business- and Economics-Related Newsletters
A big thank you to those of you who upgraded to paid subscriptions to read my two most recent paid memos: https://richardkatz.substack.com/publish/posts/detail/201675746?referrer=%2Fpublish%2Fposts%2Fpublished and https://richardkatz.substack.com/publish/posts/detail/201774434?referrer=%2Fpublish%2Fposts%2Fpublished As a result, total paid subs rose by 5.6% over the past seven days. And that put me at 12th on Substack’s list of “rising” newsletters in business and economics. “Rising” means those with the biggest percentage increase in revenue from subs over a short period of time. Of course, as is often the case with the issues I discuss, this is a good-news/not-so-good-news story. The good news is a rush of new subs. The caveat is that it’s easier to get a big percentage increase when the base is relatively small. I have enough paid subs to be in the initial rank of Substack’s “best seller list,” but a way to go before enough of the 12,000 subs to Japan Economy Watch are paid subs. For most hybrid newsletters—a combination of free and paid posts—2-7% of the total subs are paid. 5% is my initial goal. If you gain insight from reading this blog, please join those who’ve already upgraded; help me reach 5%—and beyond. Subscribe
Wellesley business buzz: Lockheart to open restaurant at Newton Centre train station; Painting Place readies for Father's Day
Lockheart restaurant, in Wellesley since 2022, readies to open a new location in Newton Centre at train station
HMNC Brain Health announces $50 million first closing of Series B financing and a strategic partnership with MEDICE
Financing will accelerate the development of HMNC’s neurosciences portfolio, including Phase 3-readiness activities for Ketabon (KET01) and Nelivabon (BH-200)Agreement grants MEDICE exclusive European commercialization rights for KET01, with tiered double-digit royalties and significant milestone payments MUNICH, Germany, June 15, 2026 – HMNC Brain Health ("HMNC" or the "Company"), a clinical-stage neuroscience company, today announced the successful $50 million first closing of its Series B fin
Is SMIC N+3’s Metal Pitch Smaller than Intel 18A’s?
Almost four years ago, we published that SMIC had started shipping 7 nm (N+1) chips. Now, SMIC is shipping its third-generation 7 nm (N+3) process in Huawei’s Kirin 9030, with a minimum metal pitch of 32.5 nm, about 10% tighter than the 36 nm minimum metal pitch shipping in Intel’s latest Panther Lake CPUs on 18A. The headline is true, but incomplete cherry picked metric. N+3 reaches the density of TSMC N6 through aggressive DUV multi-patterning and design-technology co-optimization (DTCO), but it pays for that in complexity, efficiency and process control. We found this and more in our reverse engineering and teardown where we cover SMIC’s N3 process technology, Huawei’s packaging, memory, architecture, and more. SemiAnalysis has been building a state-of-the-art teardown lab in Oregon capable of analyzing the world’s most advanced and important chips over the last year and half. We have already generated revenue on advanced datacenter chip teardowns including our recent reverse engineering of a major TSMC customer’s COUPE CPO optical engine + EIC 3D stack. This is the first public report from the SemiAnalysis Teardown Engineering & Evaluation Lab, or STEEL for short. The lab is aggressively scaling up and out and we’re excited to announce it publicly. This is a bit of inconvenient timing for TechInsights as they are private equity owned and currently being sold while having enjoyed virtually no credible competition for decades. This has led to TechInsights underinvesting in CAPEX. SemiAnalysis exceeds TechInsights in revenue despite no venture or private equity ownership and being founded only 6 years ago. Because we have no external investors and are founder led, we move faster, build faster, and we can release client chip teardowns for free regularly, while focusing on datacenter for our major clients. Here’s the first public image from our lab, the HiSilicon Kirin 9030 Pro SoC: This report will detail our teardown of the Kirin 9030 and our findings on SMIC’s N+3 process, the most advanced in China. For comparison, we’ll show our teardown of the MediaTek Helio G99, made on TSMC N6. Through this comparison, we can look at the effect of export controls – SMIC N+3 and TSMC N6 are comparable nodes, but one is heavily export-controlled, the other free to use the West’s most advanced equipment. Here we see both China’s progress and constraints. SMIC N+3 reaches TSMC N6-class logic density, but it requires far more aggressive DUV multi-patterning, so it does not match N6 on process maturity or cost. The Kirin 9030 Pro performs similarly to three-year-old Android flagships, and trails far behind the current flagship SoCs from Apple, Qualcomm, MediaTek, and Samsung. The efficiency gap is even wider. Export controls have not stopped Huawei and SMIC from shipping advanced silicon, but they have forced a different path. Without EUV, SMIC is leaning harder on DUV multi-patterning, DTCO, and increasingly complex integration. The roadmap continues forward through tighter design rules and backside power, but each step adds cost and process risk. Huawei’s τ scaling and LogicFolding show another path: stacking active logic and recovering density through advanced packaging and system-technology co-optimization (STCO). To understand the Kirin 9030, we must first understand Huawei’s SoC history. HiSilicon is Huawei’s chip design arm, responsible for the Kirin smartphone SoCs, Kunpeng server CPUs, Ascend AI accelerators, and switch/router networking silicon. Before export controls, Huawei was TSMC’s largest customer – the only customer on TSMC’s first EUV node, N7+, and among the first on N5, alongside Apple. That ended in late 2020. Huawei switched to Qualcomm SoCs in its flagship smartphones, though export controls limited them to 4G-only variants. In late 2023, Huawei returned to in-house silicon with the Kirin 9000s, a successor to the Kirin 9000, fabricated on SMIC N+2 instead of TSMC N5. In the following years, they released the Kirin 9010 and 9020 on the same N+2 process. These chips used Huawei’s in-house TaiShan CPU cores and Maleoon GPU. We have not torn down a Kirin 9020 ourselves, so the predecessor die shot is from Kurnal. The die shots show how Huawei spent its silicon budget: which functional blocks are where, and how their areas compare to the predecessor. First, a quick guide to the major blocks on the die. The total die area is nearly identical, but the 9030 uses that area more aggressively. A denser process lets Huawei fit an extra middle CPU core, more GPU and NPU cores, and larger caches into the same footprint. In contrast, the Helio G99 is a much smaller, low-cost SoC, built for budget smartphones rather than a flagship device. While the Kirin 9030 is ~140 mm², the G99 is only ~29 mm², roughly one-fifth the area. The underlying TSMC process technology, however, is directly comparable as a baseline for analyzing SMIC’s. The Kirin 9030 is an evolutionary refresh, not a clean-sheet design. Its CPU, GPU and NPU cores carry over the 9020’s families, and the gains come from three levers: the SMIC N+2-to-N+3 process step, DTCO and floorplan work, and incremental microarchitecture. Area is where the first two show up, and the 9030 scales well here. Performance and efficiency are the harder test. Huawei’s design holds up better than its node would suggest, but the chip still trails, both because N+3 sits behind the leading-edge nodes and because its cores, while competent, remain a few generations behind the newest designs. The new prime core is an incremental update. The main changes are a 10% frequency increase from 2.5 GHz to 2.75 GHz and a doubling in the L2 cache from 1 MiB to 2 MiB. Despite the increased cache, the core size decreased by 7.6%. Excluding the private L2 cache, the core size decreased by 21%. This is a large reduction for an incremental node. Compared with the TaiShan New V120 core in the Kirin 9020, the Kirin 9030’s middle core is almost unchanged architecturally, yet each core shrinks by ~22%. Most of that comes from the move from N+2 to N+3, with layout likely accounting for the rest. Visually, the most noticeable change is the increase from 3 middle cores to 4. There is also a 20% increase in the shared L3 cache of the big cluster. This helps to improve multi-core performance without sacrificing much in terms of area. Even with each core shrinking, the big CPU cluster’s total area is essentially unchanged. The per-core savings went back into an additional middle core and larger caches. The tiny cores shrank less than the prime core (excluding its L2 cache) and less than the middle cores. This is likely because fixed overhead is a larger share on a small core. We cannot resolve any architectural changes from the die shot alone, but the per-clock and efficiency gains shown below point to more than pure process and layout scaling. The area reduction was offset by a doubling of the shared L2 cache from 2 MiB to 4 MiB, leaving the total tiny CPU cluster area slightly larger. Area is the easiest improvement to see from a die shot, but it is only one part of PPA (power, performance, area). For modern logic, power and performance matter just as much, and often more. Since Dennard scaling broke down in the mid-2000s, voltage and frequency have not scaled in step with transistor dimensions, so each node has had to fight harder for gains in performance and efficiency. The starkest comparison is not Kirin 9020 versus Kirin 9030 Pro. Apple’s efficiency cores run circles around Huawei’s prime core. Apple’s low-power core delivers 20% higher integer performance while drawing only 1 W, compared with 4.5 W for Huawei’s prime core. N+3 matches TSMC N6, but N6 is several generations old. Apple and Qualcomm build on N4 and N3P, which are denser and sit on a better voltage-frequency curve, giving them a larger transistor budget and more performance per watt. The 9030’s own cores did improve. The middle and tiny cores gained 17% and 14% in per-clock integer performance over the 9020, with floating-point flat on the middle core and up 11% on the tiny. The tiny core improves cleanly, with performance rising while power falls and efficiency increases by 45% in integer and 24% in floating point. The middle core is mixed: integer performance rises but power rises faster, cutting integer efficiency by 7%, while lower power lifts floating-point efficiency 16%. Per-clock gains at the same or lower frequency are microarchitectural, so the cores are tuned, not just shrunk. Both also failed to hold their rated maximum frequencies, pointing to thermal, power, or stability limits. Per clock, the middle core sits around Arm Cortex-A720 and the tiny core near the Cortex-A520; absolute performance trails because Huawei clocks them much lower. The prime core is roughly Cortex-X2 class per clock, a 2021 design. Apple’s 2020 M1 Firestorm core is still 35% higher per clock and 57% faster in absolute integer performance at a similar 4.5 W. The current leading edge is further ahead again: the Apple M5 P-core is 60% higher per clock and 2.7× faster, the Arm C1 Ultra 45% higher and 2× faster. Matching older high-end cores per clock is a genuine design achievement. What Huawei cannot match is the voltage-frequency curve and transistor budget of leading-edge nodes, which let Apple, Qualcomm and others spend more transistors in the same area on wider cores, larger caches and deeper buffers while running at lower voltage. Huawei’s LogicFolding roadmap is one answer, stacking active logic to recover density and shorten signal paths. We return to it later. The GPU compute units (CUs) changed more visibly than the CPU cores, moving to a more rectangular layout for both the arithmetic logic unit (ALU) clusters and the CU overall. Even with ray-tracing support added, a CU shrank ~28%. However, that shrink is offset by the increase from 4 to 6 CUs and the area outside the CUs grew 33%. Overall, the GPU cluster is larger by ~10%. The GPU is where Huawei makes its biggest gains. The Maleoon 935 is not competitive with current flagships, but it is a large step up from the 920 and reaches older-flagship territory. In 3DMark it is 70% faster in Wild Life Extreme (WLE) and 79% faster in Steel Nomad Light (SNL) than the 920; with 11% higher clocks and 50% more CUs, the ~67% theoretical uplift roughly matches WLE and is beaten by SNL. It edges ahead of the Snapdragon 8+ Gen 1 in WLE and SNL, and the Dimensity 9200 and Apple A16 in WLE, but stays far behind newer parts: the Snapdragon 8 Elite Gen 5 and Dimensity 9500 are ~2.4–2.6× faster in WLE and ~3.2× faster in SNL. The Maleoon 935 is Huawei’s first GPU with hardware-accelerated ray tracing; there it lands slightly ahead of the Exynos 2200, and on par with the Apple A16, with current flagships up to 3.7× faster. The Neural Processing Unit (NPU) saw the largest structural changes of any block, moving from a Lite and a Tiny core in the Kirin 9020 to a Lite and two Tiny cores in the Kirin 9030. Both core types also show significant layout changes. This is a reversal in Huawei’s NPU design. The Kirin 9000 5G, its last flagship chip on TSMC N5, used two Lite and one Tiny core. The series of SoCs on SMIC N+2 moved to one Lite and one Tiny core, likely for area savings. With the Kirin 9030, Huawei has shifted back toward a larger multi-core NPU cluster, but with the additional area going to a Tiny core rather than a Lite core. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Before diving into the process stack, the package and memory are worth separating from the SoC itself. The Pro variant of the Kirin 9030 carries 12 GB of Samsung DRAM, with two stacks of four dies each. The dies were identified as the K4L2E165YD, a 12 Gb LPDDR5X-9600 device fabricated on Samsung’s 1a node, the fourth generation of its 10 nm-class DRAM after 1x, 1y and 1z. 1a has shipped in volume since 2022, so this is current memory rather than older-node inventory. The 16 GB Pro Max variants we obtained were found with both CXMT and Samsung packages. The CXMT package is marked CXDD7JEDM, with two stacks of four dies, packaged in week 45 of 2025. The inferred die dimensions from X-ray computed tomography (CT) are consistent with a known density of ~0.3 Gib/mm² for the CXMT G4 process, roughly equivalent to other manufacturers’ 1z processes. The Kirin 9030 uses a typical integrated package-on-package (iPoP) stack: multiple DRAM dies in a memory package sit above an organic redistribution layer (RDL) interposer, which sits above the SoC and package substrate. The full package is then mounted to the printed circuit board (PCB) through ball-grid array (BGA) solder bumps. The memory package substrate is a thin bismaleimide-triazine (BT) laminate carrying the LPDDR5X stack. The organic RDL interposer over the SoC routes the PoP signals around the die and carries possible dummy thermal copper pillars. The package substrate, a thicker Ajinomoto Build-up Film (ABF) build-up over a BT core, fans the flip-chip bumps out to BGA pitch and embeds the power planes. The whole stack is organic. The only silicon is the SoC and the LPDDR5X dies; there is no silicon interposer. Keeping it all-organic brings the package’s coefficient of thermal expansion (CTE) close to the PCB’s, reducing board-level warpage, and avoids the cost of a silicon interposer the SoC’s bandwidth does not need. In an iPoP stack, the memory package connects to the organic RDL interposer through an array of solder bumps. Underfill fills the gap around those bumps, adding stiffness and protecting the joints from mechanical stress. The Pro and Pro Max variants differ here, which we cover behind the paywall. The die shot and architecture tell us how Huawei allocated its silicon budget. The process tells us what SMIC can manufacture. We use the Helio G99 as the process reference for TSMC N6. Both SMIC N+3 and TSMC N6 are evolutions of previous 7 nm-class nodes. We used targeted TEM cross-sections through logic and memory regions, imaged in both fin-cut and gate-cut directions. Each cross-section caption gives its horizontal field width (HFW), the real width of the imaged area. We start at the transistor fins, then move up through standard cells, local interconnect, and SRAM. SMIC has not overtaken Intel or TSMC. It uses aggressive DUV scaling and DTCO to reach N6-class density, but that density doesn’t translate into comparable performance and efficiency, for two reasons: the node gap to leading-edge nodes, and Huawei’s core designs. Fin Profile One of the most important knobs in a FinFET process is the fin profile: the shape of an individual fin and the channel where current passes from source to drain. The ideal fin is tall, narrow, and nearly vertical. A taller fin increases effective channel width, while a narrower fin improves electrostatic control by thinning the body the gate must control. Push either too far, and the process pays for it: weaker drive current, fragile fins, taper, footing and line-edge variation that hit yield and device variability. The Intel 22 nm, 14 nm, and 10 nm fin cross-sections show how FinFET nodes have improved over time. 22 nm fins were a first-generation structure, relatively short, wide and strongly tapered. The shape limits current density and reduces gate control uniformity across the height of the fin. At 14 nm and 10 nm, Intel pushed the fins taller and narrower while also making the sidewalls more vertical. Rather than shrinking the device, these changes increase the effective channel width per fin and improve electrostatic control. The trade-off is that taller fins at tighter pitches are much more difficult to manufacture. Now, let’s compare the Helio G99 on TSMC N6 with the Kirin 9030 on SMIC N+3. Both processes are in the same class, with fin pitch of 30-32 nm on N+3 and 34 nm in our N6 cross-section. The pitch for N6 is especially interesting as N7’s HD library is generally listed with a 33 nm fin pitch, and N6 did not shrink pitches directly. Its density gains came from DTCO instead of tighter pitches. The 34 nm pitch was stable across our sampled region and serves more as a comparison against the SMIC N+3 we have not investigated further. Pinning down N+3’s fin patterning scheme takes more than one core unit. The CPU cores show a dense ~32 nm pitch, with the pitch between N-P fin pairs alternating between 78 and 88 nm. Logic alone may be consistent with dual-pitch mandrels of 120 and 110 nm, but this is a complex and unusual approach. Combining the pitch from the the 8T SRAM, which has more complex repeat unit, with the CPU core sequence allows us to reverse engineer the patterning steps with more confidence. As both the logic and SRAM should share the same base grid, a single CD mandrel lithography pattern with 128 nm pitch undergoing SAQP produces a die-wide ~32 nm grid (128 nm/4), which supports the pitch sequencing seen in both logic and SRAM cells. In the sampled cross-sections, N+3 shows a taller, narrower, higher-aspect-ratio fin than N6. The measured fin aspect ratio is ~9.5:1 on N+3 versus 7.8:1 on N6. N+3 also shows less top rounding, with an estimated radius of ~2 nm, compared with 2.8 nm on N6. Even though the fin widths differ, the ratio of top rounding to fin width tells the same story, with N+3 at 0.37 and N6 at 0.44. In a geometric sense, lower is better; a perfectly rectangular fin would have no top-rounding penalty. These are single-digit-nanometer features measured from a handful of cuts, so treat the absolute numbers as approximate. The important result is the relative gap: N+3’s fins are consistently taller, narrower and less rounded than N6’s. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. Standard Cell A standard cell is the basic building block of chip layout: a fixed-height row pairing one NMOS and one PMOS transistor that share a gate, tiled in a grid to build logic blocks. The key dimensions are contacted gate pitch (CGP), cell height (CH), fin count, and the lower-metal routing grid. To measure density, we use the Bohr metric: a weighted average of NAND2 gate area (60%) and scan flip-flop area (40%). This represents a realistic mix of combinational and sequential logic. This metric has its limitations, especially for complex cell layouts like TSMC’s FinFLEX, which alternates cells with different fin counts. Even so, it is the best metric for a pure process-level comparison. Another important measurement is the fin pitch; it refers to the distance between two fins of the same transistor. In a FinFET process, multiple fins are used in each transistor to increase the drive current and thus performance. TSMC N6 ships both a high-density (HD) library with 2 PMOS and 2 NMOS fins per cell, and a high-performance (HP) library with 3 of each. More fins under the shared gate mean more effective channel width. HP cells switch harder at the cost of area. Designers mix the two on a die, primarily spending HP cells on timing-critical paths, and matching their PPA targets. In the Cortex-A55 core of the Helio G99, we found a cell height of 240 nm for the HD cell. MediaTek has used HD cells in the G99 to minimize die size and thus cost. As an SoC for budget smartphones at ~$100, this is essential. By contrast, we found only one library in the Kirin 9030, with 2 NMOS and 2 PMOS fins. This suggests a narrower library strategy than TSMC N6, where both HD and HP libraries are widely used. This likely reflects the smaller customer base and the more constrained domestic design and electronic design automation (EDA) ecosystem. In all three CPU cores of the Kirin 9030, we found cell heights of 228 nm, 5% smaller than on N6. This is also a reduction of 9.5% over SMIC N+2’s cell height of 252 nm. SMIC N+3 and TSMC N6’s HD library both feature a CGP of 57 nm. For SMIC, this is a 9.5% shrink over N+2. In the past, CGP and cell height alone may have been enough to compare transistor density. Now, however, we must consider scaling boosters and DTCO as well. SMIC’s density gain does not come from EUV. It comes from using every available DTCO booster aggressively. First is fin depopulation: reducing the number of NMOS and PMOS fins in each cell. The first FinFET nodes started with 3 or 4 fins for each transistor. SMIC N+3 and TSMC N6 HD both use only 2 fins per transistor, trading drive strength for density. Next is contact over active gate (COAG). By landing the gate contact directly over the active gate, instead of out over the isolation region, the cell height drops. N+3 integrates COAG while N6 does not. Our N+3 gate-cut cross-sections indicate COAG, with the gate contact sitting over the active region, while N6 shows an off-gate contact. Last is single diffusion break (SDB). Diffusion breaks are inserted between cells in the same row to provide electrical isolation, but they also introduce local layout effects (LLE), layout-dependent shifts in electrical characteristics. In the past, a double diffusion break was used, consuming the space of two CGPs. SMIC N+3 and TSMC N6 instead use SDB, saving area but increasing LLE sensitivity. This must be controlled at the process level and accurately modeled in the process design kit (PDK) so that EDA tools can account for it. Overall, SMIC N+3 has a transistor density of 113.4 MTr/mm², slightly above TSMC N6 at 107.7 MTr/mm². Even without EUV, SMIC has achieved density beyond TSMC’s mature N6 node which utilizes EUV. Metal Stack The smallest critical dimension in the teardown is M0; SMIC N+3 uses a 32.5 nm local metal pitch. That is smaller than the 36 nm M0 pitch on Intel 18A in Panther Lake. However, this does not mean that SMIC has a better process than Intel 18A or TSMC N3P. M0 is a local intra-cell routing layer. Its usefulness depends on the full interconnect stack: M1 and M2 pitch, track count, via and line resistance, design rules, mask count, overlay control, and routing flexibility. The 32.5 nm M0 is consistent with self-aligned quadruple patterning (SAQP), whose four-population line-width loading we read coarsely as alternating widths of 21.5 to 24 nm; M1 and M2, at 38 and 40 nm, are consistent with self-aligned double patterning (SADP), a single A/B split. On TSMC N6, M0, M2, and M3 sit at a relaxed ~40 nm and are consistent with SADP-class double patterning, with no need for quadruple patterning. That said, we measure M2 for example at ~43 nm, likely inflated by sparse routing. We do not assign any specific layer to EUV from our cross-sections; the distinction we can draw is double versus quadruple patterning, not lithography wavelength. Transistor-level density in the front-end-of-line (FEOL) sets an upper bound, but the design is ultimately limited by what the interconnect stack can route. The lowest metals are the most important for standard-cell density, but the semi-global and global layers determine how usable that density is at the block and chip level. Two axes are commonly used for chip cross-sections: the fin-cut and the gate-cut. The micrograph above is a fin-cut and shows metals 0 through 3. This axis lets us see the even-numbered metals, with M0 right above the fins. There are two kinds of M0 lines. The first are the power rails; these are wide wires for the VDD and VSS running horizontally at the top and bottom edges of each standard cell. The wide wires measure 55 nm across, more than double the other M0 lines. Their width minimizes resistance and reduces IR drop. The second kind are intra-cell wires, short segments within the cell that connect terminals to M1. These have alternating widths between 21.5 and 24 nm. The M0 pitch is 32.5 nm, a 19% reduction versus N+2 and N6. At this pitch, DUV patterning requires more aggressive multi-patterning, increasing mask count, overlay sensitivity, process complexity and cost. M0 is below what a single DUV-defined spacer (SADP) can resolve, so SMIC cascades a second spacer step (SAQP). The cross-section reflects the cost: the M0 trenches are visibly more re-entrant (narrower at the bottom than the top) than M1 or M2 on the same chip and carry a bright barrier-rich foot where the trench meets the etch-stop layer. That shape is partly the intended damascene profile, as a slightly narrow bottom helps void-free copper fill, but its magnitude at M0 is driven by the tight pitch and the higher trench aspect ratio. Intel 18A supports an M0 pitch of 32 nm, although Panther Lake has only shipped with a looser 36 nm pitch. This is due to Intel’s heavy usage of HP libraries. Among leading-edge nodes, 18A has the loosest M0 pitches due to PowerVia. With power routing moving to the backside, congestion is reduced, and the entire front-side metal stack can be used for signal routing. M2 is the first true inter-cell routing layer. It runs horizontally like M0 but spans across multiple cells to carry block-level signals. The M2 pitch sets the cell’s track height – the number of M2 tracks that fit between the VDD and VSS rails, defining what the library calls a 6-track or 7.5-track cell. This layer is the most important, limiting the routing of entire blocks. SMIC N+3 features a 5.7-track cell. The M2 pitch is 40 nm, a 5% decrease over N+2 and the same as N6. This shrink keeps the pitch at the edge of what is possible with double patterning. Future nodes will need to increase the number of masks for M2 as reducing the number of tracks is much harder due to the limitations in routing. The micrograph above is in the perpendicular direction, the gate-cut, and shows metals 0 through 4. This allows us to see and measure the odd-numbered vertical metal layers. The M1 pitch is 38 nm, 9.5% less than N+2 and 33% less than N6. The M1-to-gate ratio matters because it sets local routing flexibility. N+2 and N+3 use a 3:2 ratio, while N6 uses a 1:1 ratio, explaining the huge differences in M1 pitch. The more M1 lines there are compared with the gates, the more flexibility there is for power and signal crossing within the cell. Routing flexibility enables more complex and better cells. Clean fractional ratios are also preferred as a grid is periodic and improves layouts. The 3:2 ratio gives SMIC more local routing flexibility than a strict 1:1 grid, but it also complicates layout and patterning. This is a DTCO choice, with SMIC increasing process complexity to recover density and routability without EUV. This 3:2 ratio is not very popular in the leading-edge nodes. TSMC has only used it on N7+, the N5 family, and the short-lived N3(B). They have switched back to a 1:1 ratio for N3E. Intel has only used it on the 10 nm/Intel 7 family, with Intel 4, 3 and 18A all using a 1:1 ratio. Samsung is the only one still using a 3:2 ratio at the leading edge, using it in the SF4 and SF3 families. It remains to be seen if SMIC will remain at a 3:2 ratio or move to a 1:1 ratio with its future nodes. The industry is still actively exploring these local-routing ratios. At VLSI 2026, imec will be presenting work on even higher ratios, including a 2:1 scheme that can reduce area by up to 14%. We will be covering the conference in a future newsletter article. Subscribe We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Interested in joining us on this ride and think you can be a difference maker? Check out our Careers page. The final local interconnect layer for N+3 is M3, with a pitch of 44 nm. The M3 pitch is the same as on N+2 and 10% larger than on N6. The semi-global layers carry the majority of block-level signal routing. They have a coarser pitch than the lower local layers. On leading-edge nodes, they are designed to sit at the limit of DUV single patterning. M4 through M11 pitches were found divided between 80–82 nm (M4–M6), 128 nm (M7–M10), and 148 nm (M11). Given limited sampling, it is possible these are divided further in dense routing areas. At the top are two giant metal layers, M12 and M13. These have kept the same pitches as N+2 at 1920 nm and 4600 nm respectively. While the lower layers’ pitches are generally fixed by the process and library, the upper layers vary much more in pitch and count, depending on the design. Even two smartphone SoCs on the same process can have wildly different metal stacks. The Helio G99 carries fewer routing layers, reaching coarse metal pitches of 850 nm by M9, while the larger and higher-performance Kirin 9030 keeps fine pitches until M11. SRAM At the leading edge, SRAM is much more difficult to scale than logic. TSMC’s latest nodes have seen little to no bitcell scaling, while logic still has more DTCO levers to pull. While looking for other logic libraries in the GPU compute units, we stumbled upon the SRAM. The most common type of SRAM has 6 transistors (6T), but this cell had 8 transistors (8T) instead. 8T SRAM adds two transistors to form a dedicated read port. Unlike a 6T cell, where reading disturbs the storage, the decoupled read port removes read-disturb, improving read stability and letting the cell be pushed harder for performance. At first glance, the cut looked like an unusual logic library, with each cell row having 3 fins of one polarity and 5 fins of another. The rows also alternated in orientation. Energy-dispersive X-ray spectroscopy (EDS) resolved our confusion. The cut had not landed on the GPU logic, but on the SRAM macro beside it. The unusual fin pattern was due to the SRAM library. We return to EDS in the process flow analysis behind the paywall. SRAM libraries are not like traditional logic libraries. Due to the unequal number of PMOS and NMOS transistors, they require specialized rules and layout libraries. They do not need the flexibility of logic libraries, so they are hyper-optimized for one purpose: dense, reliable memory. The SRAM cell we found is a 1:2:2-2:2 cell. This means there is 1 fin per pull-up (PU) PMOS transistor, and 2 fins per pull-down (PD) and pass-gate (PG) NMOS transistor. These 2 PU, 2 PD and 2 PG transistors would usually form a single 6T high-current cell (HCC). An 8T HCC adds a read-pull-down (RPD) and a read-pass-gate (RPG) NMOS transistor, each with two fins. We measured a cell height of 406 nm, which brings the bitcell size to 0.0463 µm². That is a theoretical peak density of 21.6 Mib/mm². We estimate that a 6T HCC would have a cell height of 292 nm and a size of 0.0337 µm². This is ~12% larger than a 6T HCC on Intel 3 and 4. We also estimate the 6T high-density cell (HDC) to have a cell height of 228 nm and a size of 0.0260 µm². This is coincidentally the same as the logic standard-cell height measured earlier. The estimate puts the cell near Samsung 7LPP/5LPP and slightly below TSMC N7/N6. That is a theoretical peak density of 38.5 Mib/mm². 6T HDC is arguably the most important cell as it is used for the largest caches in a chip, the L3 caches and system-level cache (SLC). Both the Kirin 9020 and 9030 have split the SLC into 4 banks to raise total SLC bandwidth. In the Kirin 9030, the SLC increased from 2 MiB to 3 MiB per bank. Correspondingly, the number of arrays within the bank also increased by 50%, from 16 to 24. Each array can store 128 KiB and forms an orderly pattern on the die shot. From the Kirin 9020 to the Kirin 9030, the area of a 128 KiB SLC array decreased from 0.0477 mm² to 0.0392 mm², an 18% shrink. The achieved density is 25.5 Mib/mm², 66% of the theoretical maximum. While the SLC was quite similar across both chips, the L3 has seen some major changes, particularly in terms of its layout. The total capacity also went up from 10 MiB to 12 MiB. Much like the SLC, the L3 is also split into 4 banks. In the Kirin 9020, an L3 bank consisted of 16× 128 KiB arrays and 16× 32 KiB arrays. However, an L3 bank in the Kirin 9030 instead consists of 48× 64 KiB arrays. In the Kirin 9020 L3, a 128 KiB array was 0.0513 mm² and a 32 KiB array was 0.0154 mm². The size of the 128 KiB array is different on the L3 and SLC as the assist circuitry for the two arrays differs depending on their purpose. In the Kirin 9030 L3, a 64 KiB array is 0.0210 mm². Although not a like-for-like comparison, normalized for capacity, it is 18% smaller than the 9020’s 128 KiB L3 array and 31% smaller than its 32 KiB L3 array. The achieved density is slightly lower than the SLC, at 23.8 Mib/mm², 62% of the theoretical maximum. Unlike the L3 and SLC, the prime cores’ private L2 cache uses a 2-bank design. As the prime cores’ L2 is latency-critical, it likely uses 6T HCC instead of 6T HDC. The 9020 has 16 arrays in each bank while the 9030 has 32. Each array has a capacity of 32 KiB. A 32 KiB array in the L2 shrank from 0.0171 mm² to 0.0142 mm², ~17% smaller. The density is 17.6 Mib/mm², ~59% of the theoretical maximum for 6T HCC. SRAM scaled well from N+2 to N+3, shrinking by ~19%, close to the theoretical logic shrink. The caveat is that N+2’s bitcells were unusually large, bigger than comparable 7 nm-class nodes, so part of the gain is catch-up rather than true scaling. With the insights from STEEL’s teardowns, we will be doing a deep dive into SRAM in a future newsletter article. Subscribe Everything above came out of a single STEEL teardown: die annotation, block-level area analysis and TEM cross-sections through logic and SRAM. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline or to commission a custom teardown, contact sales@semianalysis.com. Future Roadmap The same cross-sections that pin down N+3 also show where SMIC can go next. Although N+3 is already close to the practical limits of DUV multi-patterning in several layers, SMIC still has a few scaling levers left. A theoretical N+4 would likely start with cell height. N+3 uses 5 M0 tracks between its power rails. Moving to 4 M0 tracks, as on SMIC N+2 and TSMC N6, could reduce cell height by roughly 15%. The routing grid is only one side of the shrink; the front end also must fit into the smaller cell. One possible FEOL lever is reducing the p-to-n isolation spacing from two diffusion grid units to one. Intel used this scaling booster on Intel 4, and TSMC did so on its N3 family. This path trades layout flexibility for density. Fewer M0 tracks reduce local routing resources, while tighter p-to-n spacing raises integration and design-rule difficulty. M2 is also constrained by the cell height shrink. For SMIC to maintain a ~5.7-track cell, M2 would need to move toward ~35 nm. That would move another layer into SAQP territory. SMIC could also reduce the CGP from 57 nm to 54 nm. Intel reached a similar CGP on Intel 10 nm/Intel 7 without EUV. The local interconnect is also tougher. If SMIC keeps the 3:2 M1-to-gate ratio, M1 would need to shrink to 36 nm and would likely require SAQP as well. If SMIC moves to a 1:1 ratio, M1 could relax to 54 nm, but it would give up routing flexibility. Under this theoretical path, we estimate that SMIC N+4 could reach a cell height of 198 nm and a CGP of 54 nm, implying a Bohr density of 137.8 MTr/mm², on par with TSMC N5 or Samsung SF4. However, the difficulty is cumulative. Each step is individually plausible, but together they make N+4 harder than the transition from N+2 to N+3. It will likely take longer, cost more, and carry less process margin. A theoretical N+5 would require a larger integration shift. One possible path is backside contacts (BSCon), moving power routing and source/drain contacts to the backside, which would reduce front-side routing pressure and enable another reduction in cell height. The front-side metal pitches could relax to reduce the process complexity. M0 would likely relax slightly to ~34 nm, and M2 and M4 pitches could relax further. CGP is unlikely to shrink much further. Even with EUV, 48 nm has been the practical limit for yield and process control. This approach would allow N+5’s cell height to fall to 170 nm and its CGP to 53 nm. This implies a Bohr density of 163.6 MTr/mm², on par with Intel 18A’s HP library. However, this would not make N+5 cost-competitive with the leading edge. It would reach a similar density through a much more expensive route. The integration difficulty rises sharply, with new process flows for backside alignment, wafer thinning, contact reveal, and backside metallization. Past this point, standard density and interconnect scaling become increasingly unattractive. That is where Huawei’s roadmap stops looking like a normal foundry roadmap and starts looking like a packaging roadmap. At ISCAS 2026, Huawei unveiled its tau (τ) scaling law, reframing process scaling in the time domain. τ is the time cost of data movement and processing: switching delays in transistors, RC signal propagation delays in circuits, compute, memory, and networking latency. Outside Huawei’s terminology, this is called system-technology co-optimization. This is Huawei’s answer to its lack of EUV lithography. Without EUV, planar density cannot keep pace with TSMC, Intel, or Samsung. If transistor density cannot shrink further, Huawei’s alternative is to shorten wires, reduce buffering, and stack logic vertically. “LogicFolding”, Huawei’s implementation of this new scaling idea, is, in practice, an aggressive 3D stacking approach. AMD V-Cache places SRAM above or below a CPU die. AMD’s MI350X places active interposer dies (AIDs) underneath accelerator and compute dies (XCDs), with the AIDs handling cache, IO interfaces, the network-on-chip (NoC) and embedded metal-insulator-metal (MIM) capacitors. With LogicFolding, parts of the same logic block are split across multiple active dies bonded face-to-face at ultra-fine pitch. This allows Huawei to shorten some critical paths and reduce buffer overhead, not merely add cache capacity or offload the IO and interconnect. Shortening wires is where the higher clocks come from. A large share of a modern core’s delay and energy budget goes into driving long interconnects and the repeater buffers along them. LogicFolding distributes a block’s critical-path gates across multiple stacked tiers bonded at a very fine pitch, so the bond interface behaves like an additional metal layer and the longest paths get shorter. That is how Huawei expects to recover frequency and efficiency it cannot get from the process alone. Huawei’s roadmap shows its intent. Prime core frequency is targeted to rise from 2.75 GHz in the Kirin 9030 to roughly 5 GHz by 2031, far beyond what planar scaling alone could deliver. Prime cores with 3.1 and 3.39 GHz clocks are being tested in its labs, although their power consumption is unknown. Beyond that, chips are in the design, simulation or pathfinding phase, meaning the frequencies are targets. However, the direction matters more: LogicFolding also helps with performance, not just density. The catch is that Huawei’s density claim is not directly comparable to foundry densities. A stacked design can report more transistors per package footprint by adding active layers, even if each patterned die remains well behind TSMC or Intel in front-end density. This is how Huawei can claim to reach foundry 14A-equivalent density by 2031. This is not a like-for-like foundry comparison, with Huawei using stacked logic and measuring density per package footprint. On a normalized Bohr-density basis, SMIC N+3 is ~114 MTr/mm², 38% less than Intel 18A’s HD library. Huawei’s 3D roadmap closes the gap by stacking active logic, reaching 215 MTr/mm² by 2030. In 2031, the roadmap density jumps to 295 MTr/mm², implying either a third active layer, partial EUV insertion or aggressive planar DUV scaling. Huawei’s methodology makes other foundries look much denser as well. Applying it to AMD’s MI450X with an N2 top die on an N3P base die yields a theoretical density of 460.2 MTr/mm² in 2026, compared with Huawei’s 295 MTr/mm² in 2031. This Kirin 9030 does not use LogicFolding, remaining in a conventional mobile SoC package. Instead, it forms the baseline for how far Huawei and SMIC can push planar scaling. Future teardowns of Kirin and Ascend chips will show both planar logic density and Huawei’s hybrid bonding solutions. Export controls changed China’s optimization problem rather than ending it. EUV restrictions raised the cost and complexity of leading-edge manufacturing without freezing it. SMIC reaches N6-class logic density through DUV immersion, SAQP and DTCO, while Huawei shifts more of the burden onto architecture, packaging and system-level integration. Future nodes will be tougher. N+3 still had room to tighten local metals and reduce cell height and CGP. Further scaling without EUV leaves fewer levers. More aggressive multi-patterning adds masks and overlay error. SMIC can keep pushing DUV, but each step will get more expensive and less forgiving. The design side is just as critical. Huawei had domestic EDA tools and flows before the Kirin 9030, with the Kirin 9000s, 9010 and 9020 making that clear. Huawei was able to ship multiple consumer SoCs on SMIC N+2 and N+3 while cut off from the Western EDA stack. US export controls restricted EDA tools for advanced chips in 2022 but did not target tools for more mature chips. In 2025, the US government briefly placed much broader restrictions on EDA software from Synopsys, Cadence, and others, before lifting them less than two months later as part of a trade deal tied to rare earths. Huawei has been unable to access those tools because it remains on a US trade blacklist. That forced Huawei, SMIC and Chinese academic institutions to build their own tools and flows. Researchers at Peking University recently announced a prototype EDA tool for Huawei’s LogicFolding architecture, which requires a new flow to handle the multilayer layout and floorplan. This is not the same as replacing the full Synopsys or Cadence stack, but it shows where domestic EDA is headed: toward tighter co-optimization between architecture, process and packaging. These advances are also diffusing into the Chinese ecosystem. SMIC is licensing its N+2 and N+3 processes to HLMC/Hua Hong at the government’s direction rather than by choice. If the same process learning feeds into Ascend accelerators for AI training and inference, the choke point shifts from one named fab to an ecosystem. Alibaba’s T-Head silicon arm and Cambricon, a Chinese AI chip designer that is expected to supply ByteDance, could also be major beneficiaries. Sanctions aimed at SMIC alone become less effective once the manufacturing knowledge has spread to other fabs and design houses. China is not closing the gap with Intel, Samsung and TSMC. The teardown shows the opposite in several places: no EUV, no backside power, higher process complexity, and visible trade-offs. But China is still advancing. If domestic chips become good enough for phones, inference, networking and security-sensitive workloads, they can matter strategically without matching TSMC at the leading edge. Behind the paywall, we show what else STEEL can do, with material and process flow analysis of SMIC N+3, and analysis of the Kirin 9030 package. We’re diving deep into the most advanced datacenter and AI hardware hitting the market. To learn more about what’s in the pipeline, access the full Kirin 9030 and SMIC N+3 analysis or to commission a custom teardown, contact sales@semianalysis.com.
Your blood pressure reading contains a hidden number — and here’s why it matters
Pulse pressure, which can indicate how stiff your blood vessels are, provides a window into heart and brain health.
Paper or pixel? Science settles divisive debate over best way to read
Here's the word on the best medium for reading
Anti-government protesters pan bill for political Oct. 7 inquiry, said set for vote this week
Relative of slain hostage rails against Netanyahu's 'populist, fascist' bid to avoid forming state probe; report says Knesset likely to hold first reading vote in coming days
Big Show: Community celebrates reading with fun entertainment
SALISBURY — It was a big show with an even bigger finish. As part of the Rowan Public Library’s Big Show Series, Mark Lippard took the stage at the main […]
Penn Entertainment officially opens new hotel tower in Ohio
The hotel is part of the company’s Hollywood Casino Columbus.
Fleetwood Community Carnival offers rides, entertainment, games for all ages
Fleetwood Community Carnival will provide rides, entertainment, and games for people of all ages at Fleetwood Community Park July 14 to 18.
Ga. teacher-prep programs improve on science of reading, report finds
Georgia colleges and universities are doing a better job preparing future elementary teachers to teach children how to read, according to a new report.
Alabama teacher prep programs outpace nation in science of reading review
The National Council on Teacher Quality graded 20 Alabama teacher prep programs and found that 18 earned an "A" or A-plus for preparing aspiring elementary teachers to teach reading.
Ohio lawmakers send math intervention bill to Gov. Mike DeWine with science of reading exemption
An academic intervention bill that would also exempt Ohio’s classical schools from teaching the science of reading curriculum is heading to Ohio Gov. Mike DeWine’s desk.
Exclusive | Waymo Readies First National Ads as Rivals and Critics Proliferate
Alphabet’s driverless car service seizes the World Cup stage to try to humanize its technology.
Elon earns national recognition for preparing future elementary teachers in the science of reading
The Bachelor of Arts in Elementary Education program at Elon University has earned an A+ from the National Council on Teacher Quality (NCTQ) for how well they prepare future teachers to teach...
The deadly tapeworm spreading across America has reached the Pacific Northwest
A potentially dangerous tapeworm linked to severe, cancer-like disease has now been found in the Pacific Northwest, marking its first detection in wild animals along the U.S. West Coast. Researchers discovered the parasite, Echinococcus multilocularis, in 37% of coyotes tested around Puget Sound—a surprisingly high rate for a region where it had never been reported until recently.
Bypass Siri AI Waitlist on macOS 27 Golden Gate Beta: Here's How
If you installed the macOS 27 Golden Gate developer beta and have signed up to the Siri AI waitlist but are still waiting to be accepted, there's a Terminal command workaround that enables the new virtual assistant on your Mac immediately. If you're still reading, since you're on the first macOS 27 developer beta, we're assuming you are running it on a test machine, and not on your primary Mac. We're also assuming you're comfortable with using the Terminal app.
Final Reminder: June 15 Deadline for Required CRIZ Business Reporting
The City of Reading is issuing a final reminder to businesses located within the City Revitalization and Improvement Zone that the deadline to submit their required annual state and local tax report is June 15, 2026.
WHO urges targeted action to strengthen emergency workforce capacities for shared health risks across the Asia-Pacific region
At a time when the world is more interconnected than ever, the World Health Organization (WHO) is disseminating a comprehensive regional analysis of shared health risks across Asia and the Pacific, urging Member States to invest in enhancing workforce capacities regionwide to mitigate these risks and ensure health systems are better prepared to anticipate, tackle and withstand a range of crises and shocks. Over 100 delegates from 49 countries and areas in the Asia-Pacific region reviewed results from the regional risk analysis during the WHO-led Asia Pacific Health Security Action Framework (APHSAF) Stakeholders Meeting in Malaysia. Synthesizing insights from 21 strategic risk assessments and more than 800 multisectoral experts, the regional analysis highlighted an urgent imperative: countries must proactively invest in emergency workforce preparedness to navigate a landscape where climate hazards, disease outbreaks and geophysical events increasingly overlap. These complex converging crises create devastating, compounding impacts on health systems and communities – reiterating the need for investing in a fit-for-purpose regional health workforce and multisectoral action.Key findings: an evolving risk landscape More than half of the participating countries ranked flooding, cyclones, dengue and pandemic-potential respiratory pathogens as being of high or very high risk, while antimicrobial resistance, landslides and gastroenteritis remain widespread concerns as well. “Given that 51% – over half – of these assessed hazards are deeply interconnected, isolated health interventions are no longer sufficient,” said Dr Saia Ma’u Piukala, WHO Regional Director for the Western Pacific. “Extreme weather events like cyclones and floods directly trigger subsequent disease outbreaks, while environmental degradation – driven by sea-level rise, coastal erosion and saltwater intrusion – fuels health risks across the Pacific. Mitigating these cascading risks requires unified, cross-sectoral action linking environmental, agricultural and public health policies to build true regional resilience.” Priority recommendations for action To address critical vulnerabilities, WHO calls on Member States in the Asia-Pacific region to urgently prioritize the following strategic actions: Bridge workforce capacity gaps. Embed and standardize emergency preparedness within academia to promote regional workforce interoperability. Foster multisectoral coordination. Address ad-hoc taskforce responses and fragmented surge support through formalized contingency plans and standard operating procedures that are frequently updated and tested. Secure sustainable financing for emergencies. Overcome systemic barriers to access dedicated funding for both immediate anticipatory actions and long-term emergency preparedness initiatives. Enable emergency-ready primary health care. Embed emergency management into public health workforce readiness planning. Ensure that emergency planning is inclusive. Establish clear pathways for inclusive emergency planning that actively involves communities most at risk and other vulnerable groups. Optimize communication. Update risk communication and community engagement strategies, aligning them with seasonal risk calendars. Elevating workforce readiness to meet regional health risks While the gaps identified are significant, the Asia-Pacific region possesses solid foundational pillars, including dedicated clinicians, laboratory staff, rapid response teams, emergency medical teams and extensive community networks. However, to adequately address the compounding nature of modern crises, the various components of the emergency workforce must collaborate cohesively. True resilience depends entirely on transforming this currently fragmented workforce into a highly trained, interconnected and rapidly deployable asset. To achieve this, WHO is actively advancing regional workforce capacities through the Global Health Emergency Corps initiative. This initiative – supported by the Gates Foundation and the Institute of Philanthropy – seeks to build a seamless network of emergency workforce across borders and sectors, ensuring that when a crisis strikes, a standardized, well-coordinated and trained workforce is immediately ready to respond. “Scaling up emergency workforce readiness is no longer optional,” said Dr Gina Samaan, Regional Emergency Director for WHO in the Western Pacific. “It is the definitive factor that will determine how effectively the Asia-Pacific region safeguards health and protects lives in an increasingly unpredictable future.” ____________________For more information, or to arrange media interviews, contact: Ara Johannes, WHO Western Pacific Health Emergencies Division: johannesa@who.int WHO Western Pacific Communications: wprocom@who.int
'Project Hail Mary' Returns Atop Weekly U.K. Home Entertainment Sales Chart Through June 10
Amazon MGM Studios’ former chart topper Project Hail Mary, starring Ryan Gosling as a lone astronaut on a mission to save humanity, returned to No. 1 from No. 2 the previous week in its fourth week on the weekly Official Film Chart — the U.K. home entertainment sales chart. Last week’s No. 1, Universal’s The Super … Continue reading "‘Project Hail Mary’ Returns Atop Weekly U.K. Home Entertainment Sales Chart Through June 10"
Boox’s quirky page-turning remote won me over
This tiny remote is great for more than just reading.
One in three middle-aged adults struggle with basic, ‘everyday’ health tasks
Patients had trouble reading prescription instructions, recalling details about new diagnoses
New OMB rule could break science in the United States
The drug that saved your mother. The treatment your doctor recommended. The clinical trial that bought someone you love more time. None of it was inevitable. It required a system built to operate outside politics and sustained over decades, because science doesn’t operate on the timeline of a politician. That system is now under direct threat. The Office of Management and Budget (OMB) has proposed a new rule to regulate all federal grants, not just science, but housing, education, defense, NASA and everything in between, that would fundamentally change how research is conducted in the United States. There have been a lot of fires in the past 16 months, and if everything is an emergency, nothing is an emergency. But this is a very big deal. These rules would strip away the independence that has kept science from becoming a political tool. The good news is there’s still something we can all do. How the grant system was designed to work When I was a new faculty member, I was full of millions of ideas, so I sat down and wrote an NIH proposal. I worked on it for months and thought it was so good. Then I sent it to my mentor. It came back covered in comments. Places where my reasoning wasn’t as airtight as I’d thought, methods that could be stronger, gaps in my thinking that I had been too close to the work to see. It stung, as honest feedback always does, but peer review almost always makes the work better. In fact, it’s the backbone of how American science has functioned for generations. At NIH, submitted proposals go to a panel of scientists who have experience in the field. These are the people who can read research methods and spot their weaknesses, who understand when an experiment is designed well and when it isn’t. Applications are scored rigorously, and often only the top 3-20% of proposals receive funding. The people making funding decisions are required to justify them based on these reviews. To be clear: this is not a perfect system, and good science still goes unfunded more often than any of us would like due to limited resources. There is also criticism that peer review may undervalue bold ideas that are risky but could have high payoffs. But the peer review system is nonetheless a meaningful part of the grant selection process. While thoughtful and careful changes could improve the system, the changes being proposed by OMB will not make things better. The rule that could change everything Through this OMB proposal, the system that helps decide what gets funded is being dismantled. There are many troubling elements buried in this proposal, but three provisions stand out in particular. Each would be damaging alone. Together, they would change what kind of science gets done in America, and who it serves. 1. Political appointees would decide which science gets funded, and peer review would be explicitly sidelined or ignored. The guidelines your doctor follows, the standards that determine what’s in your air and water, the drugs that get approved for your family: all of it starts with a funding decision. Right now, that decision is made by scientists who can evaluate whether the work is actually sound and whether it could move the needle forward. Under this proposal, funding decisions could be made by political appointees. The careful, expertise-driven review process that shapes grant funding would be effectively sidelined. That means that a poorly designed study could get funded simply because someone in a political office liked the sound of it, while rigorous, important work doesn’t get funded because it no longer aligns with the administration’s priorities. In other words, critical work that benefits all of us could now be missed just because it has become politically inconvenient. 2. Grants could be canceled at any point, without warning, in the middle of ongoing work. Say your tax dollars have been paying for a cancer study for two years. The grant was awarded for five years, so the team is mid-experiment. There are three additional years’ worth of answers that could change how the disease is treated for hundreds of thousands of people. With this new rule, the federal government could cancel the remaining funding tomorrow, walk away from the commitment it made with your money, and have no legal obligation to finish what it started. This is a huge waste of money. There are rarely other sources of funding for this work, which means the team, the graduate students, postdocs, and research staff who have dedicated years of their careers to this project could lose their jobs. Patients who have contributed their time to studies may not see it turn into useful learnings for others. Every hour of work already completed could result in nothing useful. Science can take decades to get to tangible outcomes. It needs a stable funding system to flourish. 3. Researchers would have a harder time communicating their findings without pre-approval from the federal government. There is a saying from Sir Mark Walport: “Science isn’t finished until it’s communicated.” Science is no use to anyone if it is kept locked away in the labs that produced the data. The proposed rule could make communicating research findings harder in a number of ways: Make it harder for scientists to widely share their findings in scientific journals. Publication costs, including journal fees that allow for broad public access, could not be paid for by federal funds which is often how scientists pay these costs. Restrict researchers from engaging publicly about how their findings should inform policy or public health guidelines. This would restrict scientists from doing the work that transforms years of lab work into decisions that actually affect people’s lives. Make it harder for scientists to attend conferences. Conferences would now need to be approved by the federal agency at the time of grant award. This disadvantages conferences or publications that are not politically aligned. Conferences are a key way in which scientists learn about work happening in their field so they can collaborate and build on each other’s findings. What good is science with a muzzle? The long-term impact These changes could (and hopefully would) be reversed under the next administration. But by then, damage has been done. Once projects are halted or denied funding by political appointees, people leave their science careers for other paths or even leave the country to do their amazing science elsewhere. You cannot pause a scientific study the way you pause a subscription you decided isn’t useful anymore. You cannot freeze a research team that depends on salaries to feed their families, causing a scramble for replacement funding that, in most cases, simply does not exist. When the money stops, everything stops, and all the work in progress and its potential are lost. Despite all of the language about reducing waste, fraud, and abuse, this new proposed rule increases the administrative burden tremendously. Every researcher watching this unfold will make a rational decision: don’t start anything that will take a decade to finish. This includes not building a team around funding that could vanish, or asking the big questions that need patience and stability to answer. The most consequential science, the kind that produces the treatments and the breakthroughs that reach your doctor’s office twenty years from now, is exactly the science that would be abandoned first. This is still a proposal, so we can all do something Some worry this rule is already a done deal. But by law, OMB is required to open a public comment period. Those comments matter because they inform members of Congress, they can be used in litigation, and they create a public record. So here’s what you can do: Submit a public comment. The public comment period on this proposed change is open until July 13. Anyone can submit a comment, and OMB is required to respond to substantial ones. Each comment must be different to count as distinct; identical comments will be counted only once. Comment as an individual, not on behalf of your organization. Here’s a full resource to help you, with useful examples, but in general: Share a story about how science or federal funding has benefitted you or is involved in your work. Are you or someone you loved a cancer survivor? Do you know someone with Alzheimer’s? Have you received NIH/NSF or other federal funding? All of these can be stories you use to highlight why you care. Explain why you’re worried about these proposed changes. You can use the wording found here or in other resources to help you. Ask them to withdraw this proposed rule. Contact your elected representatives. Congress allocates money to federal agencies to spend, and it has oversight of how that process works. You can let your representatives know this proposed change concerns you and ask them to intervene. There are levers they can push that can help at this moment. Let others know why federal funding matters. This isn’t just about science, but ALL federal grants, including for education systems, defense projects, and more. The process, including the importance of federal funding, is invisible to many. We can all make it more visible by sharing how science benefits us and why we value it. You can also share this article, or any of the resources linked here, to help spread awareness! Bottom line We are quickly losing ground in scientific research in the U.S. More changes, like the proposed rule by OMB, would decimate our ability to conduct research here, leaving us all worse off: fewer treatments for pancreatic cancer, less research on pollution impacts, fewer answers for patients with rare disease, and more unaddressed health needs. The impact will be very real for all of us, regardless of where we stand politically. Using our voices for science is more important than ever. Love, LM Big thanks to Dr. Megan Ranney for reading this over and providing brilliant insights, as always. Dr. Liz Marnik, PhD, is Executive Director of The Evidence Collective at YLE and a science communicator and immunologist working at the intersection of public trust, science, and public health. You can find her on Substack, LinkedIn, Instagram and Threads. Your Local Epidemiologist (YLE) comprises a team of experts, ranging from physicians to immunologists to epidemiologists to nutritionists, working together with one goal: to “Translate” ever-evolving public health science so that people are well-equipped to make evidence-based decisions. The YLE suite of newsletters reaches over 475,000 people across more than 132 countries. This newsletter is free to everyone, thanks to the generous support of fellow YLE community members. To support the effort, subscribe or upgrade below: Subscribe
Metro ‘Public Health Alert’ signs tied to Overland Park luxury home lawsuits
Red signs reading ‘Willis Homes Public Health Alert’ with a QR code to a website have popped up from downtown Kansas City to Overland Park.
More Small Businesses Are Increasing Prices—Here’s How Accounting Software Can Help
Inflation continues to affect prices, with a net 36% of small business owners reporting raising average selling prices in May—the highest reading since March 2023, according to National Federation of Independent Business (NFIB) data published on June 9. If you’re considering raising prices for yo