SCROLL NEWS / DISCOVERY
Search headlines
Find the stories shaping the conversation.
Results for " Bar " 6,321 found 🔀 AI-powered Shuffle
Sixth annual Oktoberfest! returns to Barefoot Landing on Oct. 3
On Saturday, Oct. 3 from noon to 6:00 PM, the sixth annual Oktoberfest! returns to Barefoot Landing, promising family-friendly fun with German and fall-inspired food and drink specials on offer from participating restaurants.
Laramie County health and food inspections (9/18/26–9/24/26)
CHEYENNE, Wyo. — The Cheyenne-Laramie County Health Department inspects restaurants, bars, convenience stores, delis, grocery stores, bed and breakfasts
UFC Issues Statement on Health Condition of Raoni Barcelos
The UFC has issued a statement on the health condition of veteran bantamweight fighter Raoni Barcelos following UFC Vegas 121.Here is the UFC’s statement in full, which was issued several hours after the conclusion of UFC Vegas 121:“Following his fight tonight, Raoni Barcelos was immediately transported to a Level 1 trauma center for evaluation. The […] The post UFC Issues Statement on Health Condition of Raoni Barcelos appeared first on HEAVY.
UFC Issues Statement on Health Condition of Raoni Barcelos
The UFC has issued a statement on the health condition of veteran bantamweight fighter Raoni Barcelos following UFC Vegas 121.Here is the UFC’s statement in full, which was issued several hours after the conclusion of UFC Vegas 121:“Following his fight tonight, Raoni Barcelos was immediately transported to a Level 1 trauma center for evaluation. The […] The post UFC Issues Statement on Health Condition of Raoni Barcelos appeared first on HEAVY.
Inside California Politics
(Inside California Politics) — This week on Inside California Politics, host Nikki Laurenzo speaks with California Chamber of Commerce President and CEO Jennifer Barrera about Proposition 45, which…
Tripp Skipper: Barry Moore is going to Washington. Abdul El-Sayed shows what he’ll be fighting
And there may be no clearer illustration of the ideological fights awaiting Congressman Barry Moore in the United States Senate than Abdul El-Sayed.
Official UFC Raoni Barcelos health update
The UFC has provided an official update on bantamweight Raoni Barcelos, after he was stretchered out of the cage at UFC Vegas 121.
Official UFC Raoni Barcelos health update
The UFC has provided an official update on bantamweight Raoni Barcelos, after he was stretchered out of the cage at UFC Vegas 121.
Position Grades: Wisconsin
Well, that sucked. Let’s just go ahead and rip off the band-aid, shall we? Offense: F(**king Garbage) I can’t even bring myself to grade the offense on an individual position-by-position breakdown this week. Everything sucked, from Rocco Becht not being able to hit the broad side of a barn, to the running game looking like […]
Manchester United monitoring Barcelona left-back Alejandro Balde
Manchester United are keeping a close eye on Alejandro Balde’s situation at Barcelona, with the Spain international facing an uncertain future after falling down Hansi Flick’s pecking order.The 22...
Maha split shows all is not well with Kennedy’s US health revolution
Republicans worry Make America Healthy Again is an electoral liability while activists claim it has abandoned its values
Inside Gophers coach P.J. Fleck’s ‘crazy’ moment after Washington win
SEATTLE — P.J. Fleck got a little carried away in the immediate on-field celebration after the Gophers’ 27-24 win over Washington on Saturday. Linebacker Maverick Baranowski had just sealed the win in the Big Ten opener with a final-play tackle on Huskies receiver Dezmen Roebuck at Husky Stadium. Roebuck’s cleat slid up into Baranowski’s helmet and bloodied his mouth. Fleck then hugged one of ...
Team Gives Latest Health Update on UFC Fighter Raoni Barcelos
The team of UFC fighter Raoni Barcelos gave the latest health update on their fighter following a frightening scene at UFC Vegas 121.The main event of UFC Vegas 121 ended with a scary situation when Barcelos was finished via fifth-round TKO by Raul Rosas Jr. after a gruelling five-round war that left both men bloodied […] The post Team Gives Latest Health Update on UFC Fighter Raoni Barcelos appeared first on HEAVY.
UFC provides medical update on Raoni Barcelos following scary knockout
The UFC released an official statement regarding the health of Raoni Barcelos following UFC Fight Night 289.
UFC Vegas 121 Bonuses Revealed After Upset-Filled Card
Following an upset-filled card, the post-fight bonuses for UFC Vegas 121 were revealed following the event. There were 12 UFC fights on the card, with eight finishes. Check out the bonus winners below. Fight of the Night ($100,000 to each fighter): Raul Rosas Jr. vs. Raoni Barcelos In the main event, Raul Rosas Jr. defeated […] The post UFC Vegas 121 Bonuses Revealed After Upset-Filled Card appeared first on HEAVY.
UFC Vegas 121 Results, Bonus Winners And Highlights
Raul Rosas Jr. stopped Raoni Barcelos at 1:38 of the fifth round at UFC Vegas 121. Full results, bonus winners and the latest on Barcelos.
UFC Vegas 121 Bonuses! Officer Hernandez Brings Home The Bacon
Raul Rosas Jr. punched his ticket to the bantamweight rankings last night (Sat., Sept. 26, 2026) at UFC Vegas 121 LIVE on Paramount+ from inside Meta Apex in Las Vegas, Nevada, earning a scary knockout win over veteran Raoni Barcelos in the main event of the evening (see it HERE). In addition to bantamweight headliner, […]
Raoni Barcelos health update: UFC Vegas 121 headliner awake after terrifying fight finish
Some good news has emerged following a terrifying end to UFC Vegas 121. Raoni Barcelos was stretchered out of the Meta Apex in Las Vegas, Nevada, following a bizarre and downright terrifying finish to his main event fight against Raul Rosas Jr. tonight (Sat., Sept. 26, 2026). Thankfully, the first update on the 39-year-old Brazilian […]
Mental health & safety concerns brought up by neighbors after shooting by bar downtown
William Jewell honors MicahJo Barnett for their homecoming game
William Jewell College's homecoming game Saturday carried a deeper meaning than the usual celebrations and traditions.
Takeaways from Michigan’s embarrassing loss to Iowa
Michigan’s loss to Iowa is unacceptable. Here are takeaways from the game.
A 9-Million-Year-Old Tooth Just Challenged What Scientists Thought They Knew About the Atacama Desert
Scientists were surprised to discover a fossilized tooth from a capybara that lived almost 9 million years ago in what is now northern Chile’s Atacama Desert. Chile’s Atacama Desert is an unlikely place to find traces of capybaras, the world’s largest living rodents, whose lives revolve around water and wetland plants. Yet a fossilized tooth
Sooners implode in Athens, lose 41-13
OU lost 41-13 to No. 2 Georgia (4-0) in embarrassing fashion at Sanford Stadium in Athens Saturday.
Will Viral Lesbian Bar Article From Boston Globe Become a TV Show?
The article has spurred thousands of subscriptions to the paper. Now UTA, which reps the Globe, is fielding inquiries about adaptations.
No injury designation for Saquon Barkley in Week 3
Eagles RB Saquon Barkley all set for Monday against Bears after two consecutive full practices
Juventus make contact over January deal for Barcelona star
Barcelona star Alejandro Balde has made his way into the sights of one of Italian football’s leading clubs with a view to the winter transfer window.This comes amid the understanding that the board ...
Photo: Barcelona star reunited with Spanish teammates
A photo stemming from the buildup to Spain’s showdown with England on Saturday evening has gone viral amongst those of a Barcelona persuasion.This comes after Blaugrana summer signing Anthony Gordon...
Lions Have No Excuses Against a Banged-Up Jets Team
After getting embarrassed by Buffalo, the Lions have had four extra days to stew. Now, Detroit gets a banged-up Jets team at Ford Field—and a chance to make a statement.
Barcelona star ‘not comfortable with his situation’
Barcelona star Dani Olmo is not entirely satisfied with his current status in Hansi Flick’s star-studded squad. That’s according to Diario Sport, who have on Saturday provided an insight into the ...
Trump Again Rants About Press After Barring CNN From Air Force One: 'These Are Sick People'
President Trump again raged against press coverage after barring CNN from Air Force One: "It is amazing that I have succeeded so long."
Confirmed: Five Barcelona players start for Spain against England
World champions Spain kick off their UEFA Nations League campaign tonight with an away contest against England at Wembley.This will be La Roja’s first game after they beat Argentina 1-0 in the final...
LIVE! Till vs. Romero Streaming Updates TODAY!
Former Ultimate Fighting Championship (UFC) standouts Darren Till vs. Yoel Romero will take their talents to the bareknuckle boxing ring later TODAY (Sat., Sept. 26, 2026), headlining BKFC 94 from inside Manchester Arena, Manchester, England, streaming live on DAZN. Neither man is a stranger to the bare knuckle boxing scene, as Romero is fresh off […]
The Witcher 3 Remastered Download Size, Global Release Times and Review Embargo Lift Dates Revealed
In case you missed the big announcement at gamescom last month, CD Projekt RED is set to unleash The Witcher 3: Wild Hunt Remastered this coming week, and it'll be…
Real Madrid’s Midfield Woes Resurface After Atlético Loss
Real Madrid’s 2-1 defeat at Atlético Madrid on Sunday has left José Mourinho’s side fourth in La Liga after seven matches, six points behind leaders Barcelona, according to The Athletic. The res...
Sold-out Charity Regatta Raises Record $334,690 for VNA Health
For 22 years, the Santa Barbara Yacht Club (SBYC) has raced boats to raise funds and friends to benefit the Community Care Programs and charitable mission
Man City chairman Al Mubarak releases statement about club’s situation
Manchester City chairman Khaldoon Al Mubarak says “nothing has changed” and “our confidence and intent in proving the club’s innocence is just as strong as when this began”. News broke on Friday that City had been found guilty on all but one of the 115 charges laid by the Premier League in February 2023, charges the club have always strenuously denied.
5 Questions with Battle Red Blog: will either team win?
In Week 3 of 2026 our Indianapolis Colts will host the Houston Texans. Knowing the party was coming to town I sat down with Scott Barzilla of Battle Red Blog, SB Nation’s Houston Texans blog. We swapped questions and answers about both the Texans and the Colts and what follows is what I’ve learned about […]
Intel Panther Lake Teardown, 18A, BSPD, GAAFET, SemiAnalysis STEEL
Panther Lake debuts the first commercial implementation of backside power delivery (BSPDN), introduces Intel’s first iteration of gate-all-around (GAA) transistors, and showcases their advanced packaging capabilities with its Foveros-S assembly. With Panther Lake, Intel’s manufacturing arc has shifted from nebulous roadmaps to shipped silicon, a significant milestone on their long road back to competitive semiconductor manufacturing. To evaluate the extent of Intel’s comeback, we tore down Panther Lake. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Our teardown traces 18A from its four-sheet RibbonFETs (Intel’s marketing name for GAAFETs) and gate stacks through contacts, frontside and backside wiring, and the bonded carrier. We explain how these material and integration choices improve gate control and reduce resistance, while adding capacitance, thermal resistance, and process complexity. Our measurements put Panther Lake’s 18A compute logic and TSMC N3E GPU logic at similar logic density. However, 18A does not lead TSMC N3P, N2 or Samsung SF2 in peak density. Panther Lake’s CPU cores are incremental updates, and the high-end GPU still uses TSMC N3E. Panther Lake assembles one compute tile, one GPU tile, and one I/O tile atop a passive base tile using Intel’s Foveros-S advanced packaging. Both compute tile variants use Intel 18A. The Xe3 GPU options are a 4-core GT1 tile on Intel 3 and a larger 12-core GT2 tile on TSMC N3E. Both I/O tile variants use TSMC N6. [1], [2] Our analysis centers on the PTL-U compute tile, both the 4-core and 12-core GPU tiles, as well as the 12-lane I/O tile. In conventional chips, power and signal are routed through the same frontside metal stack towards the device frontend. Power rails consume scarce routing resources near the transistors, while tall via stacks carry VDD and VSS from the coarse upper wires to local rails. Backside power delivery (BSPD) moves the main power network behind the transistor layer, to the backside, separating it from frontside signal routing. We covered BSPD and its impacts in 2024. [3], [4], [5] Intel’s BSPD implementation, branded as “PowerVia”, routes power through dedicated backside metals to nano-TSVs, which connect those rails to local source/drain (S/D) contacts. Implementing that separation requires Intel to build the interconnect stacks from both sides of the wafer. The frontside comprises the M0-M14 signal stack, while the backside comprises the BM0-BM5 power stack. M0 and BM0 are closest to the transistors. The nano-TSVs connect the two sides, but Intel patterns and etches each via from the front after forming the contacts. A narrow via runs from the side of the contact deep into the silicon substrate. Intel then completes the frontside signal metal stack, bonds the wafer to a carrier, flips it and removes the original substrate until the buried via tips are exposed. The backside metal stack is then deposited directly on the revealed vias. The nano-TSV and backside-via profiles taper in opposite directions because Intel forms them from opposite sides of the wafer. The transistor structures form the FEOL. Local contacts and nano-TSVs connect them to the wiring. M0 begins the frontside interconnect stack. The silicon carrier remains attached above the frontside interconnects. It supports the device wafer during substrate removal and backside processing and remains part of the finished chip’s thermal path. PowerVia removes the main power distribution from the congested frontside metals, routing supply through shorter and wider backside wires. Its lateral landing still occupies area in the standard cell, so it recovers less cell area than a direct backside contact. [3] Nano-TSVs beside the logic devices carry VDD or VSS from the backside power network, while signal connections continue upward through the frontside metals. Backside Interconnects Samsung SF2 data is included for comparison to Panther Lake’s within this article. SF2 is the incumbent GAA foundry node but lacks BSPD, serving as a useful reference to evaluate 18A. A full teardown of Samsung’s S26 products, processed on SF2, will be shared soon.Nanosheet-cut EDS comparison. The PowerVia supply path runs from the backside Cu rails through Mo-lined W nano-TSVs to the local transistor contacts. In this cross section, the tapered connection spans roughly 150 nm from the contact level to BM0. The Ta liner confines Cu and promotes adhesion to the surrounding stack; the AlOₓ etch stop controls the next dielectric etch above the rail. Dielectric beneath the ribbons electrically separates the devices from the backside wiring and removes the conducting silicon body below the channel. [6] AlOₓ serves as an etchstop (ES), enabling endpointing and protecting the underlying layers. Low-volatility aluminum fluoride reaction products resist the fluorinated plasma, allowing a thin AlOₓ film to protect the metal while the surrounding low-k dielectric is removed. [6], [7]. While the BM0 and layers above the M1 lines show double AlOx layers, Our SMIC N+3 teardown showed single AlOₓ layers. SMIC uses a simpler local AlOₓ substack, while the remaining cap and etch sequence provide the required landing protection. So why double layers? The closely spaced AlOₓ doublets provide two protected endpoints in the etch sequence. Intel documents an AlOₓ/SiN/AlOₓ stack that explains the benefit. The main dielectric plasma etch stops on the first AlOₓ film; a selective wet clear opens that film; a second plasma etch removes the intermediate SiN and stops on the second AlOₓ film. The final wet clear exposes the metal landing surface. SiN is the intermediate dielectric in Intel’s published example. [8] The second stop protects the metal through a cap breakthrough. Wide openings can etch faster than narrow ones, and etch depth varies across the wafer. Metal under an early-clearing opening would otherwise be exposed while other openings still need more etching. Staged protection widens the process window and reduces metal erosion, corrosion and void formation. [8] TSMC documents AlN/AlOₓ/SiOC/AlOₓ above Cu, with AlN blocking Cu diffusion, and a simpler AlN/SiOC/AlOₓ variant that omits one AlOx film. [9] Levels with different opening sizes, aspect ratios, pattern densities and cap materials need different etch margins. A double AlOx stop is useful where another protected endpoint justifies the added processing. The extra film adds formation, selective opening and cleaning steps, plus another set of interfaces to control adhesion, moisture, and stress. These blanket films are opened through the existing via pattern, so each film does not require another lithography mask. AlOₓ adds parasitic capacitance when it replaces lower-k dielectric; two thin AlOₓ films can nevertheless contain less AlOₓ than one thick film. Total thickness, placement, and theintermediate dielectric determine the electrical cost. Deposition chemistry also changes AlOx permittivity and residual hydroxyl content, which can oxidize the underlying metal. [7], [8], [10], [11] The backside stack separates into relatively fine BM0-BM2 wiring near the devices and coarser BM3-BM5 power distribution. The largest pitch increase occurs between BM2 and BM3. BM0’s pitch closely matches the logic-row height, fitting local power delivery to the cell rows. Higher levels aggregate current through larger conductors: routing density becomes less important than low resistance and current capacity as the network approaches the package. This hierarchy provides wide power wiring for the power delivery network without consuming scarce frontside signal-routing resources. [3] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Frontside Interconnects Intel 18A combines Mo-lined W contacts and nano-TSVs with a separate backside Cu power network. Samsung SF2 keeps power on the frontside, using Ti-based contact interfaces and Ta-based barriers and Co liners around Cu wiring. In 18A standard-cell rows, backside power rails supply the devices through nano-TSVs within the cells, freeing frontside routing resources. Samsung’s M0 accommodates both power and signal connections. From the device toward M0, the connection runs through a Ti-based S/D interface, W contact fill, a Mo-lined W via, and the Cu M0 wire. Mo supplies a conductive nucleation and adhesion layer for W, replacing the resistive TiN liner used in conventional W integration. This increases the effective conduction volume within the feature while retaining W fill and its established polishing, cleaning and etching processes. Intel’s Mo/W patent describes this integration tradeoff. The nano-TSV uses the same Mo-lined W construction in the backside supply path. [12] The move from TiN to Mo is an incremental change. While a full Co or Mo fill can also reduce the volume lost to liners in very small features, it requires new integration schemes that increase complexity and risk. Cu remains attractive for wider wires due to its low resistance. As wires and vias shrink, the diffusion barrier consumes an increasing fraction of their cross-section. [12], [12], [14] Intel uses Co/Ru liners at M0-M1, Co at M2-M4, and Nb at M5-M9. The lower-level liners help Cu adhere and reduce void formation during trench fills. Applied Materials’ Endura has new thermal control that facilitate wetting process, so the thin film continuity is good enough that good capillary pressure will drive Cu atoms to the via bottom without voiding. Intel’s choice to use Nb is particularly interesting. Intel’s Nb patent describes a conductive diffusion barrier intended to reduce the barrier’s contribution to resistance relative to conventional Ta-based barriers, particularly at via bottoms where all current crosses the barrier. The patent pairs Nb in coarser levels with the option of lower-cost PVD processing. [15], [16] The upper metal layers support thicker barriers formed through physical vapor deposition (PVD) despite its worse coverage and uniformity. Meanwhile, the lower metal layers require thinner barriers deposited through conformal atomic layer deposition (ALD). Co/Ru adds another material interface and requires controlled deposition and Cu fill. Changing liners and barriers by metal layer allows Intel to optimize interconnect resistance, process complexity, and reliability. [15, 16] RibbonFET, Intel’s name for its gate-all-around FETs (GAAFETs), replaces the FinFET’s vertical fins with four stacked horizontal silicon nanosheets, allowing the gate to surround the channel on every side. The path to GAAFET begins with the planar transistor. A planar MOSFET places the gate above the channel between its source and drain. Pairing an NMOS with a PMOS transistor creates a CMOS inverter, in which the NMOS pulls the output low for a high input, and the PMOS pulls it high for a low input. The gate must retain electrostatic control of the channel to ensure clean switching. As gate lengths shrank, the drain began to compete with the gate for that control, increasing off-state leakage. Electrostatic control was restored through an architectural evolution that raised the channel into a vertical fin and wrapping the gate around three sides. Called “FinFET”, this new architecture packed more effective channel width into a smaller footprint. Further scaling made it harder to maintain both drive current and leakage within smaller cells, and reintroduced the same problems planar MOSFETs faced. Nanosheet GAAFETs close the fourth side by replacing the vertical fin with a stack of horizontal nanosheets, each surrounded by the gate. The tighter electrostatic control suppresses leakage at shorter gate lengths while stacking adds effective channel width within the cell footprint. In a FinFET process, channel width changes in discrete steps as designers must add or remove whole fins. Nanosheet width can instead be adjusted continuously within the process’s design rules. Wider sheets increase drive current, while narrower sheets reduce capacitance at the cost of drive current. Intel 18A uses stacks of four nanosheets each and varies their widths across logic and SRAM. At the process level, adding more sheets to each stack increases effective channel width and drive current, but complicates fabrication. RibbonFET vs MBCFET Samsung began GAAFET production in 2022 with SF3E, following with SF3 and now SF2. Its ‘MBCFET’ provides a useful structural comparison with Intel’s first RibbonFET implementation. [17] STEEL is digging deeper into SF2, used in the Exynos 2600, and TSMC’s GAAFET N2, used in Apple’s A20 Pro, in upcoming newsletter articles. We’re throwing some teasers on X. Let’s compare Samsung SF2’s MBCFET with Intel 18A’s RibbonFET. Subscribe Even to the untrained eye, Intel’s extra nanosheet is obvious. Intel stacks four ribbons to Samsung’s three. Samsung’s sheets are much wider in these fields, so both sheet count and width matter to the available channel perimeter. Sheet width also changes which silicon surfaces carry current. On conventional (001) silicon, wide nanosheets emphasize the broad top and bottom surfaces, favoring electron transport; the larger sidewall contribution in a narrow sheet favors hole transport. Thinner sheets improve gate control but increase confinement and scattering. This makes width and thickness part of the NMOS/PMOS balance, alongside strain and threshold voltage. [18], [19] GAAFET designs like 18A use different work-function-metal (WFM) stacks for NMOS and PMOS. Around each ribbon, a thin SiOx interfacial layer separates the silicon channel from the HfOx high-k dielectric, with La providing dipole tuning and the WFM wrapping the dielectric. NMOS uses a TiAl-based stack, while PMOS uses TiN WFM. W fills the remaining gate trench, providing a lower-resistivity path where the work-function layers are no longer needed. In this field, the PMOS stacks leave room for W between ribbons, while the NMOS stacks occupy more of those gaps. A silicon-based dielectric marks the P/N boundary, allowing the PMOS and NMOS gates, sharing the same gate trench, to be processed sequentially. Fast logic paths, retention circuits, and SRAM need a family of threshold options. Changing threshold without substantially changing device dimensions, capacitance or fabrication complexity is valuable. FinFET processes typically use different work-function-metal stacks. In a four-ribbon GAA stack, the narrow sheet-to-sheet gap limits how much WFM can fit around each channel. La in the gate dielectric creates interfacial dipoles at the SiOx/HfOx boundary, shifting effective work function and tuning threshold voltage. This gives Intel another control alongside its NMOS and PMOS WFM stacks. Low-threshold devices improve critical-path drive; higher thresholds reduce leakage elsewhere. Dipole tuning is especially useful in GAA because it changes threshold without consuming the narrow intersheet gap with thicker WFM. Precise control of La incorporation, diffusion and interface quality has long been a challenge, limiting viability in high volume production but is now seen from every leading-edge foundry. Intel’s patent describes depositing a dipole-forming oxide above HfOx and annealing it toward the interfacial oxide before completing the work-function and fill metals. This separates threshold tuning from the space available for metal. Newer research addresses the thermal cost: imec’s 2026 dipole-middle research inserts the shifter between two HfOx depositions, shortening the diffusion path while protecting SiOx during patterning. [20], [21]Matched-cut EDS, Intel 18A (left) vs. Samsung SF2 (right). Intel retains raised source/drain epi beneath its contacts, while Samsung recesses W deep into the epi to form a V-shaped Ti-lined interface. The deeper contact increases metal-to-semiconductor area and shortens the current path from the lower sheets, reducing contact and spreading resistance. It also removes epi volume and brings the contact etch closer to the channel ends. Retaining more epi preserves the material available for strain transfer, especially from SiGe into PMOS. These geometries balance contact access against stress engineering and etch margin. [22], [23] Samsung stacks three sheets to Intel’s four ribbons, and both processes use sheet width to tune drive strength. In our Samsung cross-sections, widths range roughly from 19 to 30 nm in the NPU rows and 37 to 50 nm in the CU cell. The Samsung nanosheets taper, with the widest sheet at the bottom and the narrowest at the top. Both processes use HfOx gate dielectric and Ti-based work-function stacks, with Al in the NMOS stack. In the Samsung devices shown here, the dielectric and WFM occupy the intersheet gaps, leaving W above the top sheet. Intel’s PMOS stack leaves more room between ribbons, and W fills those gaps while the thicker NMOS stack leaves W mainly in the upper trench. Gate-stack EDS maps. The W between Intel’s PMOS ribbons provides a conductive path close to the lower gates. Where WFM fills the entire gap, the gate still surrounds the channel, but voltage reaches it through the more resistive work-function films. Thinner WFM and dipole tuning preserve room for low-resistivity fill; Mo and Ru are alternative fill metals being developed for further scaling. [24] A masked, sequential WFM flow explains the different gate heights and inter-nanosheet fill. The proposed sequence below shows how separate NMOS and PMOS work-function steps produce that geometry. Enabled by the BSPDN process, Intel replaces the dense-logic silicon subfin with dielectric, removing the parasitic conduction path below the ribbons and reducing substrate-related capacitance. A retained silicon body as in classical, non-SOI, planar and FinFET designs needs junction and punchthrough-stop engineering to suppress leakage. Dielectric isolation makes that leakage less sensitive to the subfin doping profile but adds removal and fill steps. It also weakens the direct thermal path through silicon, making the contacts, metal stacks and package more important for heat extraction. [24], [26] Fluorine is concentrated around selected Intel device structures in the maps. WF6 is a standard precursor for W nucleation and fill, while barrier films protect adjacent dielectrics from fluorine attack. Low-fluorine W processes reduce the residual-F burden. Chloride-based precursors avoid introducing F during W deposition, but require control of chlorine attack, nucleation and fill quality. The integration target is a continuous, low-resistance W path with a thin protective liner and minimal chemical damage to the surrounding stack. [20], [27], [28] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. We measured cell height, gate pitch, metal geometry, and ribbon dimensions at the XTEM sites shown below. The tables group these dimensions by site and device polarity. Our “sheet cuts” cross the silicon channel and show the ribbons end-on. “gate cuts” run along the channel through successive gates. The 18A logic cell dimensions point to a five-track logic library while the N3E and Intel 3 cell dimensions evidence a seven-track logic library. The DDR-PHY uses wider M0 wires and much larger spacing than core logic. That trades routing density for lower wire resistance and weaker coupling between neighboring nets. The geometry suits the current delivery and coupling requirements of analog, clock, and I/O circuitry. PowerVia lets 18A combine a compact cell height with wider M0 geometry by moving the main power rails off the signal-routing tracks. That relaxes local wire scaling while preserving a small cell footprint. Cell height and gate pitch set the geometric density; pin access and routability determine how much of it a real block can use. [29] The biggest takeaway from our gate-pitch measurements is that Intel 18A compute logic and TSMC N3E GPU logic have similar density in the Bohr representative-cell model. The 18A example is 18.6% denser than the Intel 3 GPU example. Gate pitches are nearly identical across the three sites, so cell height drives most of the difference. The Bohr model combines a four-transistor NAND2 spanning three gate pitches and a 32-transistor scan flip-flop (SFF) spanning nineteen pitches, weighting their densities 60:40. The sensitivity column shows how independently changing cell height and gate pitch by ±1 nm changes the result. This compares representative cell geometries; whole-die density also depends on cell mix and placement. The 18A P-core gives M0 substantially more metal cross section than the N3E vector engine. Treating each profile as a trapezoid gives 2.63 times the area per line and 1.84 times the area after normalization by routing pitch. The larger section reduces the geometric contribution to line resistance and lowers current density for a given current. Taller and wider wires also add capacitance, so circuit delay depends on the balance of resistance and capacitance. The DDR-PHY has less metal area per routing width than the 18A core fields, while remaining above N3E. [30] Area = height × (top CD + bottom CD) / 2, including liners. Area/pitch normalizes by routing width. Taper is the symmetric sidewall angle from vertical, with the largest angle belonging to the DDR-PHY. Compute tile The measurements show how ribbon dimensions and gate-stack geometry vary across the compute tile and between NMOS and PMOS to balance channel drive, gate load and the space needed for the dielectric/WFM stack across logic, SRAM and the DDR-PHY. Width mainly changes available channel perimeter; thickness also changes electrostatic control and carrier confinement. Gate-stack thickness then determines the space left for low-resistivity fill P-core and LP E-core logic Both the P-core and LP E-core use multiple nanosheet widths. Widths are measured on high-magnification XTEMs while wider-field images demonstrate additional width choices within the LP E-core. Multiple widths are expected even within an LP E-core. Timing-critical paths, buffers and cells with different fanout need different drive strengths. The lower-magnification fields show this width diversity beyond the sites quantified in the table. L2 and L3 SRAM GAA gives SRAM designers another way to balance the pull-up (PU), pass-gate (PG), and pull-down (PD) transistors. FinFET bitcells set device strength through fin count while GAA adds nanosheet width as a sizing knob. In a 6T SRAM cell, a strong pull-down relative to the pass-gate limits read disturbance, while a strong pass-gate relative to the pull-up improves writability. During a write, the pass-gate and write driver pull the node storing “1” below the inverter trip point. During a read, the pull-down holds the node storing “0” low. Bias, threshold voltage, mismatch and assist circuitry set the remaining margin. FinFET high-current cells commonly use a PU:PG:PD fin-count pattern of 1:2:2, a device-sizing ratio rather than a current ratio. Ribbon width lets Intel balance SRAM strengths without adding whole fins. The L2 cell uses its narrowest ribbons for PU and widest for PD, improving writability and read stability respectively. Intel’s disclosed HCC operates without assist; its denser HDC uses negative-bitline write assist. Pulling the selected bitline briefly below ground increases pass-gate overdrive so it can overpower the pull-up at lower supply voltage. That buys density and low voltage writability at the cost of boosting circuitry, switching energy, and additional voltage stress that must be controlled. [31], [32] Four rectangular ribbons give the perimeter = 8 × (width + thickness), before corner rounding. PG/PU is 1.49 and PD/PG is 1.16. The L3 structures closely resemble L2 in layout and cell height. Fewer L3 nanosheet widths are tabulated because fewer high-magnification images were available. DDR PHY The DDR-PHY trades density for controlled analog behavior and reliable off-chip signaling. It contains drivers, receivers, delay circuits, and calibration logic that set drive strength, sampling time, and voltage margin. Repeated four-sheet devices with similar widths fit the use of regular transistor units for matching and programmable drive. Its wider local wiring provides room for current delivery and separation of sensitive signals, while consuming more area than a dense core-logic grid. The layout serves the memory channel’s electrical requirements as well as digital logic density. [33] The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page. Intel 3 GPU devices Vector engine logic Intel 3’s XVE logic uses two-fin PMOS and NMOS devices with power rails in M0. Its cell height and M0 pitch give a seven-track geometry, two tracks more than the 18A logic. One-fin groups also appear among the two-fin devices. Intel 3 L2 SRAM The Intel 3 L2 SRAM uses the familiar HCC sizing pattern: one PU fin, two PG fins, and two PD fins. N3E GPU devices Vector engine logic The N3E XVE field contains repeated two-fin devices with seven-track cell geometry. N3E remains a FinFET process, giving Panther Lake a direct FinFET-to-RibbonFET comparison. N3E L2 SRAM The N3E L2 SRAM uses the same PU:PG:PD fin-count pattern of 1:2:2. Panther Lake-U follows Lunar Lake’s floorplan quite closely. Both pair 4 P-cores with 4 LP E-cores and NPU, media and display engines in similar locations. Lunar Lake also uses Xe2, the direct predecessor to Panther Lake’s Xe3 GPU. This makes Lunar Lake the most direct basis for our comparisons. Arrow Lake differs in core count and uses the older Xe-LPG GPU architecture, so we only use it where it offers a more direct component-level comparison. Compute tile Panther Lake compute-tile floorplans remain sparse even months after launch. Intel 18A’s backside metal and dielectric stack must be removed without damaging the underlying structures before a clean transistor-level floorplan can be imaged. Most published die shots hide or heavily process the background, but we are quite proud of the die shot we achieved and are excited to show the work we have done. We measured the areas of the key components on the compute tile and compared them with their Lunar Lake predecessors on TSMC N3B. These help us to capture changes in block area and compare the two chips across process nodes and designs. Our total tile areas exclude the scribe-line area. The compute-plus-GPU subtotal below uses the PTL-U compute tile and GT1 GPU; it excludes the I/O tile and passive base. Individual block areas use the boundaries marked on the floorplans The compute-plus-GPU row is recomputed from the displayed PTL-U and GT1 areas. Component rows use their stated per-region counts and are not an additive partition of the whole tile. The P-core area remains almost unchanged between Lunar Lake and Panther Lake, despite L2 capacity increasing from 2.5 MiB to 3 MiB. Arrow Lake uses the same Lion Cove core as Lunar Lake but also has a 3 MiB L2. Cougar Cove fits 20% more L2 into the same P-core area. The larger private cache keeps more of each core’s working set close to its execution units, reducing access to shared L3 and DRAM. Extra capacity adds storage leakage and lookup energy, so designers balance it against avoided lower-level accesses. The shared P-core L3 cache also shrank by 14.8%. [2] Cougar Cove combines a similar footprint with Intel’s reported power-efficiency improvements. RibbonFET’s tighter channel control reduces leakage, while PowerVia reduces supply droop and allows tighter voltage guardbands. [1] Darkmont’s four-core LP E-core cluster is 5.0% smaller than Skymont’s on Lunar Lake, with most of the reduction in its L2 regions. The 1 MiB region shrank by 8.4% and the 1.5 MiB region by 14.9%. The tag arrays also use one fewer visible row. Tags identify which memory addresses the data array holds, so rearranging them changes the cache’s layout and wiring without requiring less data capacity. [2] The LP E-cores share one L2. This pools capacity and avoids duplicating all the cache machinery, but the four cores contend for its banks and bandwidth. Their separate cluster also keeps light work away from the performance cluster and its L3, allowing that larger domain to sleep. [1], [2] Cache area includes more than the storage cells. Tags identify each line, decoders select rows, sense amplifiers read the small bitline signal, and wires connect to the banks. Splitting an array into smaller sections shortens wordlines and bitlines, improving access speed, but duplicates peripheral circuits. Panther Lake’s smaller cache regions therefore reflect the complete memory implementation, including how much of each region is devoted to storage. [34] Unlike Meteor Lake and Arrow Lake, Panther Lake has no separate SoC tile. The NPU, LP E-cores, memory controllers, PHYs, media and display engines now share the compute tile. This removes an active die and keeps CPU memory traffic on one die. The cost is moving PHY and I/O-related circuitry onto 18A: drivers, receivers and analog circuits must still meet external voltage, loading and signal-integrity requirements, so their area does not shrink like dense digital logic. [1], [2] The biggest shrink comes from the NPU, which occupies 36.9% less area. NPU 5 consolidates the same total INT8 MAC count into half as many neural compute engines. Each of the three NCEs has a larger MAC array to make the complete NCE envelope 22.6% larger than an NPU 4 engine. Consolidation also halves the number of scratchpads and SHAVE DSPs, from 12 to 6. The MAC array handles matrix multiplication and convolution, while SHAVE executes vector and custom operations that fit the array poorly. [1], [2], [35] The paired floorplans identify each NCE envelope and its scratchpad, MAC, and SHAVE regions. Each measured MAC polygon is counted once per NCE in the area accounting below. The scratchpads store weights, activations, and intermediate results near the MAC arrays, allowing repeated use without fetching them again from DRAM. Halving their number delivers the largest measured area saving but leaves less local storage for the same total MAC count. Layers that no longer fit locally require smaller working tiles or more transfers of intermediate data. The benefit depends on keeping the enlarged arrays busy while managing that tighter storage budget. [36] NPU 5 also adds native FP8. Using half the operand width of FP16 reduces storage and transfer demand, helping workloads fit the smaller local memory budget. Lower precision and format-dependent range make scaling and model validation part of deployment. Hardware activation functions further reduce work that would otherwise occupy the programmable DSPs. [1], [2] Microsoft requires an NPU to deliver at least 40 TOPS for Copilot+ PCs. Both Lunar Lake and Panther Lake meet this threshold, but Panther Lake uses significantly less silicon. GPU tiles Panther Lake is Intel’s first product with Xe3, its latest GPU architecture. It offers two different GPU tiles: a smaller GT1 tile with 4 Xe3 cores on Intel 3 and a larger GT2 tile with 12 Xe3 cores on TSMC N3E. Panther Lake allows us to compare the same GPU architecture across both Intel 3 and TSMC N3E. Wildcat Lake adds a third Xe3 implementation on Intel 18A. A future newsletter will detail Xe3 and its implementation differences across all three process nodes. GT2 scales Xe3 to a different physical layout, with render slices arranged vertically instead of GT1’s horizontal arrangement. Slice placement sets the distances to shared cache banks and the D2D interface. Those wires consume area and add delay, so scaling the number of Xe cores also requires a new balance of cache placement, routing and timing. [1] What’s immediately obvious is that the GT2 tile on TSMC N3E has much smaller Xe cores than GT1. These block areas include logic, caches, and routing. An Xe core on the GT1 tile is ~69% larger than one on Lunar Lake, and ~55% larger than one on GT2. Intel 3 therefore uses substantially more area per Xe core. The block-area gap exceeds the measured logic and SRAM density gaps, bringing routing, timing targets, cell mix, and floorplan allocation into the comparison. The measured vector/matrix engine region is almost unchanged between Lunar Lake and Panther Lake’s GT2 tile. Xe3 retains eight 512-bit vector engines and eight 2048-bit XMX engines per core. Its gains also come from feeding those engines more effectively: more resident threads hide stalls, and variable register allocation lets shaders trade registers per thread against the number of threads kept active. [1] The shared L1/SLM capacity increased by 33% from 192 KiB to 256 KiB, while its area increased only 5%, raising effective density by 27%. L1 retains reused cache lines, while software-managed SLM lets a thread group share data locally. Both reduce traffic to more distant memory. Allocating more SLM per group can also limit how many groups reside on a core at once. [1], [37] The GT1 tile carries 4 MiB of L2 against 16 MiB on the GT2 tile. GT1 divides its L2 cache into four 1 MiB banks, while GT2 uses eight 2 MiB banks. Each bank contains 128 macros, but each N3E macro stores 16 KiB, twice the Intel 3 macro’s 8 KiB capacity. The N3E macro is only 54% larger while holding twice as many bits, giving it 30% higher density: ~23.7 Mbit/mm² versus 18.3 Mbit/mm². Including bank-level circuitry, the gap widens to ~16.9 Mbit/mm² on GT2 versus ~10.4 Mbit/mm² on GT1. GT2 gains density with its macros storing more bits per unit area, and those macros occupy more of each cache bank. Larger macros spread decoder and sense-amplifier overhead across more storage, while a more compact bank layout reduces the share spent on control and routing. The compromise is longer wordlines and bitlines that carry more capacitance. [34] I/O tile Panther Lake uses two I/O tile variants, both fabricated on TSMC N6. The smaller one provides 4 PCIe 5.0 and 8 PCIe 4.0 lanes and serves lower-tier systems as well as those without a discrete GPU, while the larger one adds 8 PCIe 5.0 lanes, bringing the total to 20 lanes, for discrete-GPU connectivity. Panther Lake SKUs with the larger 10- or 12-Xe GPUs use the smaller I/O tile. [38] The smaller I/O tile adds a PCIe 4.0 block and a Thunderbolt block to Lunar Lake’s I/O layout, providing four additional PCIe 4.0 lanes and another Thunderbolt 4 port. Its repeated N6 blocks retain nearly identical areas and layouts. Reusing these proven PHYs and controllers avoids porting and requalifying external interfaces on 18A, where faster digital logic offers less benefit to circuits constrained by the off-chip link. [38] SemiAnalysis’s teardown lab (STEEL) dives deep into the world’s advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. We’re hiring technical experts from system to transistor and everywhere in between. Check out our Careers page. Panther Lake offers scalability and modularity through its disaggregated packaging that partition compute, GPU, and I/O silicon into separate tiles allowing for a suite of tile configurations. This partitioning makes the package part of Intel’s node economics as it determines how much leading-edge wafer area each product consumes, which functions can remain on other processes, and how much configuration freedom Intel can offer from a shared set of tiles. Furthermore, fabricating the compute and GPU tiles separately confines the new 18A process to the compute tile and allows graphics and I/O to use other, more established, and more cost-effective processes. For Panther Lake, the GPU and I/O tiles are assembled alongside the compute tile on a passive silicon base using Foveros-S. Intel’s current technology brief lists a nominal 36 µm pitch for Foveros-S. Through-silicon vias (TSVs) in the base connect the fine wiring above to the larger package connections below. The functional tiles sit side by side on that passive base in a 2.5D configuration. [39] Our cross-section through the compute and GPU tiles shows the package’s wiring hierarchy. Microbumps connect each active tile to the passive silicon base; its fine redistribution layer (RDL) carries the short, dense tile-to-tile links. TSVs carry connections through the base to the package substrate, which fans them out to the much coarser motherboard solder joints. The base supplies interconnect, while computation remains in the active tiles above it. [39] At the compute-tile edge, the higher-magnification inset shows a local microbump spacing of approximately 25.24 µm and a feature width of 12.33 µm. These local spacings are finer than Intel’s nominal Foveros-S value. The X-ray fields further confirm tighter neighboring bumps, consistent across every die-to-die area found on each tile. Additional X-ray analysis is offered after the paywall. Putting the memory controller beside the CPU removes the D2D transfer that CPU memory requests required in Meteor Lake and Arrow Lake. This avoids the extra transmitter, receiver, and link traversal, saving interface energy and latency. Panther Lake’s separate GPU still crosses a D2D link to reach DRAM, so its larger local caches also help contain package traffic. [1], [40] Smaller dies are less likely to contain a random fatal defect, and screening them before assembly prevents one bad tile from consuming a complete package of good silicon. Reuse also spreads design and qualification work across more products. Against those gains, Intel pays for the passive base, D2D circuits, extra bonding and test steps, and losses during assembly. Cost per working product across the portfolio captures the combined effect of wafer yield, reuse, test, and assembly. [29] Wildcat Lake packaging Intel launched Core Series 3, formerly Wildcat Lake, on 16 April 2026 for value mobile and edge systems. Wildcat Lake keeps 18A but removes the passive base and combines more functions on one die to simplify the package. The two products therefore reveal two distinct ways to commercialize the same leading-edge process. [41] Wildcat Lake’s 18A die combines up to two Cougar Cove P-cores, four Darkmont LP E-cores, two Xe3 cores and a smaller NPU. A separate platform-controller die supplies I/O, connected through UCIe, Intel’s first processor implementation of the standard. Consolidating graphics remove a tile boundary and the passive base, reducing assembly complexity for a modest-bandwidth value product. It also ties CPU and graphics scaling to the same die, giving up Panther Lake’s ability to swap in a much larger GPU. [42], [43] In July 2021, Intel CEO Pat Gelsinger set out an ambitious process roadmap aimed at regaining performance leadership by 2025, later described as five nodes in four years. Five years and one CEO later, Intel’s comeback story is not as unambiguously positive as Pat may have hoped. [44], [45] Intel once set the pace for process technology, bringing high-k metal gate technology and FinFETs into volume production years ahead of the rest of the industry. Its 22 nm FinFET process reached consumers with Ivy Bridge in 2012. [46] Intel’s integrated device manufacturing (IDM) model allowed its architects and process engineers to co-optimize products and processes. Starting with Sandy Bridge, Intel dominated x86, while AMD struggled with Bulldozer. That lead faltered at 14 nm and broke at 10 nm. Intel targeted a massive 2.7× density increase, but the node arrived years late and required several revisions before it could support Intel’s full lineup. This delay forced Intel to stretch 14 nm across six generations, while TSMC moved ahead in process technology and AMD recovered in x86. By 2019, Intel was still shipping 14 nm across most of its product stack, with its 10 nm client ramp focused on Ice Lake mobile processors. Meanwhile, TSMC was shipping N7 and N7+, and AMD’s Zen 2 compute chiplets used N7 to raise core counts and improve efficiency. Intel’s process failures were central to its decline, but unsound business decisions furthered their downward slide. Product delays compounded product mistakes, pushing client, server, and FPGA roadmaps off schedule. Several attempts to enter AI (Nervana and Gaudi) and networking (Tofino) also failed to establish lasting businesses. Intel’s recovery has focused on consumer CPUs and advanced packaging. Tiger Lake, Alder Lake, Lunar Lake and now Panther Lake have restored Intel’s consumer roadmap. On the process side, Intel 4 shipped with Meteor Lake, Intel 3 with Granite Rapids and Sierra Forest, and Intel 18A with Panther Lake. Intel has also made advanced packaging part of its foundry offering. However, Intel is still playing catch-up in servers. Several Xeon generations arrived years late and trailed contemporary AMD and Arm server CPUs in performance, efficiency, and core count. The process roadmap is back, but Intel does not hold the same process-technology leadership position it held prior to 10 nm. The introduction of gate-all-around nanosheets and backside power delivery are two of the biggest changes to transistor integration in a decade. Intel took on both changes at once: 18A paired its first RibbonFET with PowerVia in Panther Lake. Panther Lake is a substantial manufacturing milestone. Our cross-sections show how RibbonFET and PowerVia reshape local contacts and wiring, while the floorplans show where architectural consolidation and process choices save area. A sustained competitive lead depends on product performance, cost, yield, and the next implementation. The SemiAnalysis STEEL teardown lab breaks down advanced datacenter and AI hardware. To learn more about our pipeline or to commission a teardown, contact sales@semianalysis.com. WE’RE HIRING: Architecture, floorplan, packaging, manufacturing, and labs experts. Opportunities from system to transistor and everywhere in between. Check out our Careers page.. [1] Intel, “Intel Tech Tour 2025 Panther Lake recap,” Doc. 866361, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/866361/ITT_2025_Panther_Lake_Recap1.pdf [2] Intel, “Core Ultra processors Series 3 datasheet, volume 1,” Doc. 872188-001, Jan. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/872188/872188-001.pdf [3] N. Horiguchi and E. Beyne, “Backside power delivery: How to power chips from the backside,” imec Reading Room, Nov. 25, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/how-power-chips-backside [4] W. Hafez et al., “Intel PowerVia technology: Backside power delivery for high density and high-performance computing,” in Proc. IEEE Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2023, pp. 1–2, doi: 10.23919/vlsitechnologyandcir57934.2023.10185208. [5] K. Fischer et al., “Intel 18A platform technology featuring RibbonFET (GAA) and PowerVia for advanced high-performance computing,” in Proc. Symp. VLSI Technol. Circuits, Kyoto, Japan, Jun. 2025, pp. 1–3, doi: 10.23919/vlsitechnologyandcir65189.2025.11075006. [6] K.-F. Cheng, C.-L. Teng, H.-Y. Huang, and H.-C. Chen, “Metal oxide composite as etch stop layer,” U.S. Patent 12 176 247 B2, Dec. 24, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12176247B2/en [7] S. W. King, “Dielectric barrier, etch stop, and metal capping materials for state of the art and beyond metal interconnects,” ECS J. Solid State Sci. Technol., vol. 4, no. 1, pp. N3029–N3047, 2015, doi: 10.1149/2.0051501jss. [8] A. V. Mule’, D. J. Towner, D. Seghete, C. R. Ryder, and A. A. Gonzalez, “Multi-layer etch stop layers for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20220102343 A1, Mar. 31, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20220102343A1/en [9] C.-C. Wang and J. H. Wang, “Interconnect structure with dielectric cap layer and etch stop layer stack,” U.S. Patent Appl. 20230253247 A1, Aug. 10, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20230253247A1/en [10] Y. J. Wu, K.-F. Cheng, C.-C. Lee, H.-K. Chang, and H.-Y. Huang, “Etch stop layer for interconnect structures,” U.S. Patent Appl. 20240332070 A1, Oct. 3, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240332070A1/en [11] M. G. Rainville, N. Shankar, K. S. Reddy, and D. M. Hausmann, “Deposition of aluminum oxide etch stop layers,” U.S. Patent Appl. 20180197770 A1, Jul. 12, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20180197770 [12] J. S. Leib et al., “Conductive lines having molybdenum liner and tungsten fill for advanced integrated circuit structure fabrication,” U.S. Patent Appl. 20240429126 A1, Dec. 26, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.justia.com/patent/20240429126 [13] M. Naik, “Cobalt enables power and performance scaling at single-digit logic nodes,” Applied Materials, Dec. 17, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://www.appliedmaterials.com/us/en/blog/blog-posts/cobalt-enables-power-and-performance-scaling-at-single-digit-logic-nodes.html [14] Lam Research, “Breaking through AI’s invisible barrier with molybdenum,” Lam Research Newsroom, May 6, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://newsroom.lamresearch.com/molybdenum-metallization-ai-revolution [15] P. Yashar, G. Malyavanatham, and H. Vijwani, “Integrated circuit interconnect structures with niobium barrier materials,” U.S. Patent Appl. 20240112951 A1, Apr. 4, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20240112951A1/en [16] Applied Materials, “Applied Materials unveils chip wiring innovations for more energy-efficient computing,” Applied Materials Investor Relations, Jul. 8, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://ir.appliedmaterials.com/news-releases/news-release-details/applied-materials-unveils-chip-wiring-innovations-more-energy [17] Samsung, “Samsung showcases AI-era vision and latest foundry technologies at SFF 2024,” Samsung Semiconductor, Jun. 13, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://semiconductor.samsung.com/news-events/news/samsung-showcases-ai-era-vision-and-latest-foundry-technologies-at-sff-2024/ [18] C. W. Yeung et al., “Channel geometry impact and narrow sheet effect of stacked nanosheet,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2018, pp. 28.6.1–28.6.4, doi: 10.1109/iedm.2018.8614608. [19] S. Mochizuki et al., “Evaluation of (110) versus (001) channel orientation for improved nFET/pFET device performance trade-off in gate-all-around nanosheet technology,” in Proc. Int. Electron Devices Meeting (IEDM), Dec. 2023, pp. 1–4, doi: 10.1109/iedm45741.2023.10413854. [20] D. G. Ouellette et al., “Fabrication of gate-all-around integrated circuit structures having molybdenum nitride metal gates and gate dielectrics with a dipole layer,” U.S. Patent 12 051 698 B2, Jul. 30, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US12051698B2/en [21] imec, “Advancing the CFET-based device roadmap with novel integration modules and standard-cell architectures,” imec, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/advancing-cfet-based-device-roadmap-novel-integration-modules-and-standard-cell [22] A. Reznicek, X. Miao, C. Lee, and J. Zhang, “Wrap around contact for nanosheet source drain epitaxy,” U.S. Patent 11 302 813 B2, Apr. 12, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US11302813B2/en [23] J. A. Kittl, J. G. Hong, D. R. Palle, and M. S. Rodder, “Methods for varied strain on nano-scale field effect transistor devices,” U.S. Patent 9 978 833 B2, May 22, 2018. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9978833B2/en [24] S. Gandikota et al., “Method of reducing metal gate resistance for next generation NMOS device application,” Int. Patent Appl. WO 2024/137272 A1, Jun. 27, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/WO2024137272A1/en [25] J. Zhang et al., “Full bottom dielectric isolation to enable stacked nanosheet transistor for low power and high performance applications,” in Proc. IEEE Int. Electron Devices Meeting (IEDM), Dec. 2019, pp. 11.6.1–11.6.4, doi: 10.1109/iedm19573.2019.8993490. [26] C. Yoo, J. Chang, Y. Seon, H. Kim, and J. Jeon, “Analysis of self-heating effects in multi-nanosheet FET considering bottom isolation and package options,” IEEE Trans. Electron Devices, vol. 69, no. 3, pp. 1524–1531, Mar. 2022, doi: 10.1109/ted.2022.3141327. [27] S. S. Pradhan, D. B. Bergstrom, J.-S. Chun, and J. Chiu, “Tungsten gates for non-planar transistors,” European Patent Appl. EP 3 506 367 A1, Jul. 3, 2019. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/EP3506367A1/en [28] L. Schloss and X. Ba, “Tungsten films having low fluorine content,” U.S. Patent 9 754 824 B2, Sep. 5, 2017. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US9754824B2/en [29] Intel Foundry, “Accelerating AI and HPC with advanced process and packaging technologies,” Doc. 367370-001US, Jun. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-11/intel-foundry-hpc-ai-brief.pdf [30] M. Lofrano, X. Chang, H. Oprins, and Z. Tokei, “Mitigating the thermal bottleneck in advanced interconnects,” imec, Sep. 28, 2023. Accessed: Sep. 14, 2026. [Online]. Available: https://www.imec-int.com/en/articles/mitigating-thermal-bottleneck-advanced-interconnects [31] S. Bair, “Intel at ISSCC 2025: Navid Shahriari invited talk, eight papers, forums, panelist & product details,” Intel Community, Feb. 19, 2025. Accessed: Sep. 14, 2026. [Online]. Available: https://community.intel.com/t5/Blogs/Tech-Innovation/Edge-5G/Intel-at-ISSCC-2025-Navid-Shahriari-Invited-Talk-Eight-Papers/post/1667592 [32] D. Chandra, E. Potladhurthi, D. R. S. Reddy, and K. S. Rengarajan, “Tunable negative bitline write assist and boost attenuation circuit,” U.S. Patent Appl. 20160203857 A1, Jul. 14, 2016. Accessed: Sep. 14, 2026. [Online]. Available: https://patents.google.com/patent/US20160203857A1/en [33] Synopsys, “Advantages of firmware-based training in high-speed DDR IP,” Synopsys IP Technical Bulletin. Accessed: Sep. 14, 2026. [Online]. Available: https://www.synopsys.com/articles/firmware-based-training-ddr-ip.html [34] N. Muralimanohar, R. Balasubramonian, and N. P. Jouppi, “CACTI 6.0: A tool to understand large caches,” Hewlett-Packard Laboratories, 2009. Accessed: Sep. 14, 2026. [Online]. Available: https://users.cs.utah.edu/~rajeev/cacti6/cacti6-tr.pdf [35] Intel, “Intel Tech Tour 2024 Lunar Lake AI hardware accelerators,” Doc. 824436, 2024. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/824436/2024_Intel_Tech%20Tour%20TW_Lunar%20Lake%20AI%20Hardware%20Accelerators.pdf [36] Y.-H. Chen, J. Emer, and V. Sze, “Eyeriss: A spatial architecture for energy-efficient dataflow for convolutional neural networks,” in Proc. 43rd ACM/IEEE Annu. Int. Symp. Comput. Archit. (ISCA), Jun. 2016, pp. 367–379, doi: 10.1109/isca.2016.40. [37] Intel, “Introduction to the Xe-HPG architecture,” Doc. 758306, Nov. 4, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/developer/articles/technical/introduction-to-the-xe-hpg-architecture.html [38] Intel, “Core Ultra processors Series 3 for the edge,” Doc. 855291. Accessed: Sep. 14, 2026. [Online]. Available: https://cdrdv2-public.intel.com/855291/Intel%C2%AE%20Core%E2%84%A2%20Ultra%20Processors%20Series%203%20for%20Edge%20Overview_2.pdf [39] Intel Foundry, “Foveros technology brief,” Doc. 366411-001US, Feb. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/dam/www/central-libraries/us/en/documents/2025-07/foveros-25d-product-brief.pdf [40] D. Das Sharma, “UCIe: Building an open chiplet ecosystem,” UCIe Consortium, 2022. Accessed: Sep. 14, 2026. [Online]. Available: https://www.uciexpress.org/_files/ugd/0c1418_c5970a68ab214ffc97fab16d11581449.pdf [41] Intel, “Intel launches Intel Core Series 3 processors,” Intel Newsroom, Apr. 16, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-launches-intel-core-series-3-processors-changing-the-game-for-everyday-computing.html [42] Intel, “Core Series 3 launch press deck,” Apr. 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://download.intel.com/newsroom/2026/Intel-Core-Series-3/Intel-Core-Series-3-Launch-Press-Deck.pdf [43] Intel, “Intel outlines architectures for agentic AI at Hot Chips 2026,” Intel Newsroom, Aug. 24, 2026. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intel.com/content/www/us/en/newsroom/news/client-computing/intel-outlines-architectures-for-agentic-ai-at-hot-chips-2026.html [44] Intel, “Intel accelerates process and packaging innovations,” Intel Investor Relations, Jul. 26, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/filings-reports/all-sec-filings/content/0001193125-21-224438/d199788dex991.htm [45] Intel, “Intel reports third-quarter 2021 financial results,” Intel Investor Relations, Oct. 21, 2021. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/1505/intel-reports-third-quarter-2021-financial-results [46] Intel, “3rd generation Intel Core processors bring exciting new experiences and fun to the PC,” Intel Investor Relations, Apr. 23, 2012. Accessed: Sep. 14, 2026. [Online]. Available: https://www.intc.com/news-events/press-releases/detail/577/3rd-generation-intel-core-processors-bring-exciting
Alexander Zverev’s Girlfriend Celebrates Major Milestone at Laver Cup
Barely a week after his US Open triumph, World No. 2 Alexander Zverev is in London leading Team Europe at the Laver Cup. The post Alexander Zverev’s Girlfriend Celebrates Major Milestone at Laver Cup appeared first on HEAVY.
Panthers Week 3 X-factor: Get RB Chuba Hubbard going
Weeks 1 and 2 for the Panthers offense has been all about QB Bryce Young. But this week, they may want to get RB Chuba Hubbard going.
Xiaomi 18 Pro series available globally: Free shipping on all imports for a limited time only
Both the Xiaomi 18 Pro and Xiaomi 18 Pro Max are already available outside China albeit not officially: Customers in Europe and many other parts of the world can order the new Leica camera flagships by importing them from Xiaomi`s home market. Here is a brief overview of the costs, your options and what to look out for.
Press pool dispute escalates as White House cuts CNN from Air Force One travel
The White House has barred CNN from traveling on Air Force One this weekend. It's another chapter in President Trump's fight with the press, and it appears there will be no TV pool coverage today.
Lazio Stalwart Reaches Verbal Agreement With Balotelli’s UAE Club
Lazio and Patric could be about to end their 11-year collaboration, with the defender closing in on a move to Al-Ittifaq.The BackgroundThe 33-year-old is a Barcelona youth product who made the move to...
Gossip: Juventus planning loan offer for Barcelona’s Alejandro Balde
Alejandro Balde’s future is making headlines again in Spain after spending the majority of Barcelona’s first eight games of the season on the bench. The left-back has had to watch Xavi Espart and Joao Cancelo play instead of him and has only managed 12 minutes of action for Hansi Flick’s side so far in 2026-27. […]
Barcelona Map Out 2027 Haaland Plan Around Yamal
Barcelona are putting plans in place to try to sign Erling Haaland from Manchester City in 2027, according to Sports Illustrated’s transfer roundup, published on September 6. The report states that ...
"Michael’s game is more mature" – Rummenigge compares Olise to Yamal
Karl-Heinz Rummenigge believes Michael Olise and Barcelona’s Lamine Yamal are the best wingers in the world, even suggesting that the Bayern Munich star’s game is “more mature”.“Olise is out...
Report claims Havertz out for 4 weeks with injury
Kai Havertz has returned to Arsenal for further checks after picking up a muscle injury with Germany, with fresh reports raising concern over how long he could be out.Photo by Lars Baron/Getty ImagesK...
Owner says fencing outside longtime Greektown liquor store hurts business, sues
Athens Liquor owner Ather Butris claims street festival fencing has become a barrier to his bottom line, prompting a lawsuit against the Greektown Neighborhood Partnership.
White House bars CNN from covering Trump on behalf of major TV networks
Rural Health Transformation Project funding could bring childcare to Juneau hospital workers
A Juneau nonprofit received grant funding to create a childcare center for Bartlett Regional Hospital employees.
“One Tree Hill” star’s most embarrassing moment on set involves getting glass stuck ‘3 or 4 inches’ into his butt
The CW drama, which costarred Chad Michael Murray and James Lafferty, ran from 2003 to 2012.
Wiz Khalifa to Perform at Champs Downtown
Rapper Wiz Khalifa is set to perform at Champs Downtown in State College, the sports bar and club announced on Instagram. The show at 7 p.m. on Oct. 1 is
Is an Iowa-based dog business really going to take over the Bar K location in OKC?
Rumors circulated on social media on Friday morning about an Iowa-based business possibly taking over the Bar K location in downtown Oklahoma City.
Melissa Barrera reveals what it would take for her to return to the “Scream” franchise after firing
Barrera was cut from the horror-comedy saga after sharing controversial posts on social media.
Overcoming Behavioral Health Barriers in the Hispanic Community
For Hispanic and Latino communities, mental health care can remain difficult to access—not only because of practical barriers, but also because stigma can make it harder to acknowledge a need...
Barcelona could reignite pursuit of Sporting star in January
The board at La Liga giants Barcelona are giving consideration to reigniting their chase of Sporting CP star Luis Suárez following the turn of the year.That’s according to Spanish outlet Fichajes, ...
Senate approves legislation targeted at pilot, air traffic control mental health guidance
The Senate passed two bills Thursday aimed at removing barriers for pilots and air traffic controllers seeking mental health treatment, as well as reduce stigma surrounding the conditions. Sponsore…
Covington to create special entertainment district for BLINK
There will be murals and installations from the end of the Roebling Bridge to Seventh Street, and festivalgoers can check out the city's bars and restaurants.
The Greatest Article That Has Ever Been Written
The most entertaining story I’ve ever read. All hail Sara Bareilles. The best casting news. Are you a faithful or a traitor? We just live in Veep now. I have never been more entertained than when read...
Celebrating National Lobster Day with coastal flavors and weekend entertainment at Confab Kitchen and Bar
Confab Kitchen & Bar owner Doug Gross and Chef Jason Hall visit WANF’s ATL Live Show to demonstrate how to assemble a fresh lobster roll for National Lobster Day and share details on Friday live patio music and fall game-day viewing.
Quick hitters: O-line health, safety depth and Dan Campbell’s first days in Detroit with Glenn
Allen Park — Detroit Lions coach Dan Campbell and quarterbacks coach Mark Brunell met with the media on Friday. Here are the noteworthy items from those conversations. Healthier up front, banged up in the back It’s good news, bad news on the injury front. First, the offensive line is going to be far closer to full strength with starters Blake Miller (knee) and Christian Mahogany (hip) on track to return to the lineup. That provides stability the offense lacked against Buffalo, particularly at right tackle, where backup Larry Borom allowed 11 quarterback pressures and committed a trio of penalties. Subscribe However, with that same unit, veteran Ben Bartch (foot) is likely to miss Sunday’s matchup with the Jets. The left guard competition that’s been ongoing since May has effectively been whichever option is healthy that week. In the back end, safety Thomas Harper (ankle) is also unlikely to be available on Sunday. That leaves the team precariously thin at the position following Avonte Maddox going on injured reserve this week. Christian Izien is expected to get the start alongside Chuck Clark. “Izzy's been working a lot back there and had a full week,” Campbell said. “And he's gotten a ton of work this week, a ton of reps, full-speed reps. ‘This is what you're going to do, this is the calls’ and just dousing him with full-speed reps and he's done a good job this week.” Safety depth is the bigger concern. The team is expected to count on some combination of Jalen Mills, who signed to the practice squad on Monday, Bishop Fitzgerald, the undrafted rookie poached off the Steelers’ practice squad on Tuesday, and rookie cornerback Keith Abney, who doesn’t have experience at safety. “I'll say this about Abney, man, for a rookie, he's a pretty dang smart, conscientious, aware football player that's got a ton of room to really take off,” Campbell said. “…He's young. He's another one, he just needs reps and reps. But, if we need it, that'll be a guy who may have to go in for us.” You can check here for the full injury report, with game designations, later this afternoon. Reflecting on the past Responding to comments made by Jets coach Aaron Glenn this week, Campbell reflected on his earliest days with the Lions, before the coaching staff had been fleshed out and it was just he and Glenn at the facility working through what they wanted things to look like. “It was just he and I in the lab,” Campbell said. The coach said the two would fill the whiteboard that remains in current coordinator Kelvin Sheppard’s office top to bottom with notes about philosophy, coaching style, team identity and the type of players they wanted to target. “He looks different than me,” Campbell said. “I'm taller, I'm whatever. He's quicker. All these different things, man, but we're really the same. I mean we're so much the same. And he's the defensive version, I'm the offensive version. He was my right hand man. …It was fun, man. Those were good days.” Campbell said it was one of the best and worst days of his life when the Jets hired Glenn to be their coach. “AG means the world to me,” Campbell said. “He's one of my dearest friends because I know what he's made of. “…It's because you know you're losing a little piece of you. That's what he meant to me and to us. So, that's hard.” Traits under center A couple of weeks back, Sheppard noted that Brunell had identified Saints quarterback Tyler Shough as the best prospect at the position ahead of the 2025 draft. On Friday, Brunell confirmed his evaluation and explained what he looks for when studying a young quarterback. Here’s the full answer: “Young quarterbacks, you have to look at everything, you know? I look at guys coming out of college just like I look at any free agents that we might be looking at, or guys that we might add to our roster. Do they take care of the ball? Are they on time? How is their decision-making? How are their feet? “It's tough because you look at a college player, you don't understand what they're trying to do offensively, what their reads are, but you can identify when a guy is accurate, obviously, and when the ball's getting there on time. If there are a lot of interceptions, it raises a red flag. And I think with a lot of the spread offenses of what you're seeing, when you see a young player and they're running some pro concepts and he's having to make protection calls, and he's getting the right play out of the run game, and when there's a lot on his plate and he's executing it very well, and he's managing all of that, that really jumps out at you. It’s really hard to find. “That's one thing we saw with Luke Altmeyer. He had a lot of experience. We call it, ‘Hey, he's playing quarterback.’ And what does that mean? It's not just completing passes. It's getting guys lined up, getting the right play, getting the protection call right, just fixing some problems, being able to progress (through reads). And there's still some young guys out there that can do that at a high level, which is good to see.” Regarding Altmyer, who competed for the team’s backup job through the offseason and currently resides on the practice squad, Brunell acknowledged physical development slows once the season starts, because there aren’t reps to go around. However, there’s still extensive mental development that’s ongoing. “The key for him is approach the game as if you're the starter, mentally,” Brunell said. “And that's really all you can do. Approach the game as if you're the starter and be good in the (class)room. You come in alongside Jared (Goff), and you come in alongside Josh (Dobbs) and (do) whatever they need. And if you get an opportunity to talk to Luke, he'll tell you he does have a lot of responsibilities besides just getting donuts for us on Saturday. “For him, it's mentally staying focused, and even though there's really no chance this Sunday of him playing, he has to approach it as if he's taking the first snap and playing the whole game. So what's our game plan? What are our checks? What are we anticipating? And then during the game, we keep him involved as far as looking at coverages and pressures. And so, really, for him, it's just a mental game. And for now, that's all we can do.” Reason for more zone The Lions have significantly increased their usage of zone coverage on defense this season. I asked Campbell if that was a reaction to their personnel or driven by the focus to generate more turnovers, given it can be easier to produce interceptions when you can keep eyes on the quarterback while playing zone. “I think it was a little bit of both,” Campbell said. “We just felt like this would suit us a little bit better up to this point, and then be disruptive and get takeaways, which worked well Week 1. We had two (opportunities) last week against Buffalo we weren’t able to get, but they’re there.” I followed up by asking how much the combination of heavy blitzing with the back end playing zone has contributed to some of the early-season coverage woes, since adding extra players to the pass rush means leaving the coverage short-staffed. “I mean, it’s challenging, and that’s why a lot of the things we’ve done in zone, for the most part, have been to reduce that stress level back there,” Campbell said. “But that also requires the front getting there. And if you don’t get there, we already kind of talked about that, but there (has to be) a trust there.” The alternative, Campbell explained is sending four and it taking longer for the rush to get home, which can create different problems for a defense. “You can bleed yards,” Campbell said about the strategy. “It gets a little longer and it’s dink-and-dunk and run after catch. …So, we do what we think is right by what we feel like our personnel (does well). But also the game plan, who you’re going in to play, the matchups, their offense. “We’re not stuck on one way.” Detroit Football Network is a reader-supported publication. To receive new posts and support my work, consider becoming a free or paid subscriber. Subscribe
Birmingham Barons 2026 Season Review
After a rough first half, Birmingham rallied and nearly stumbled into the playoffs
Anthony Gordon addresses Premier League demands amid England squad withdrawals
Barcelona winger Anthony Gordon has spoken about the physical demands of the Premier League on England players after five players withdrew from the ongoing international window
Man City vs the Premier League: The lawyers who have been fighting sport’s ‘trial of the century’
A guide to the highly-trained - and paid - barristers who have been arguing one of English football's most significant legal cases
‘Roseanne’ star Michael Fishman says onscreen mom lashing out at him shows ‘darker side of my childhood’
‘Roseanne’ actor Michael Fishman reacted to Roseanne Barr lashing out at him over the sitcom revival’s cancellation, says her actions exemplify ‘darker side of my childhood.’
Yankees’ Anthony Volpe decision got tougher after one huge swing
For six innings Thursday, the Yankees trailed Tampa Bay 4-0. By the end of the eighth, George Lombard Jr. had […]
Raul Rosas Jr. developing game plan to finish Raoni Barcelos
Raul Rosas Jr. has been developing a game plan and plans to finish Raoni Barcelos this weekend.
✂️ Coach cracks down: top nation banned from the barber!
Modern footballers are certainly known for sporting extravagant looks and occasionally setting one hairstyle trend or another.Here and there, however, the pros seem to spend a little too much time on ...
World of Warcraft: Forever has recaptured the original MMO's magic, something I thought was impossible
World of Warcraft: Forever's beta has set a high bar for the new iteration of the classic MMO, and having played it over the past few days, I'm utterly smitten
Can the Left Make America Fun Again?
Hi friends, I’ve got a piece in The New York Times today about how collective joy — participatory, youthful, anti-corporate — can defeat Trumpism and transform our lives. The basic argument is that politics used to be embedded in communal life: dances, sports leagues, union halls. As that infrastructure disappeared — and more of everyday life was atomized and privatized — politics became something broadcast at people rather than something they did together. NYC-DSA and Zohran provide another model, where socials and face-to-face organizing are tied to a fight vs the corporations that fenced off so much of the good life. Rebuilding that kind of collective fun, I argue, could help bring young people back into politics and, by redistributing America’s wealth, make everyday life more joyful. I would super appreciate it if you’d read the piece, share it, or post comments on it. Thank you! p.s. FYI, Opinion writers don’t get any say over their headlines! More Take action to support the fight of licensed deck officers at Alaska Tanker Company and Overseas Shipholding Group to win a first union contract. This is one of the most important, and underreported, unionization campaigns in America: these workers have a huge amount of power over domestic energy distribution and maritime supply chains, and they’re still without a contract two years after having voted overwhelmingly to unionize. Please sign the public petition here, and if you’re an academic you can sign this support letter.
Scotland’s New Era Under Pocognoli: Bold Choice Sparks Fresh Hope
Scotland kicks off a new UEFA Nations League campaign this weekend, and for the first time in over two decades, a foreign manager is in the dugout. Sébastien Pocognoli, a 39-year-old Belgian with barely two years of senior coaching experience, replaces Steve Clarke after his own team’s group-stage exit at the World Cup. It’s a […] The post Scotland’s New Era Under Pocognoli: Bold Choice Sparks Fresh Hope appeared first on HEAVY.
The hard choice Democrats face on Republicans’ anti-trans attacks
They’re being bombarded with attack ads. How do they respond without betraying a vulnerable community?
Wilonsky: Dallas’ plate of entertainment, shot of enforcement
Dozens of venues claiming they’re really restaurants are being cited by Dallas City Hall for being bars.
Best of Denton 2026: Bars and Nightlife
Each year, the Denton Record-Chronicle hosts the Best of Denton awards to highlight a few deserving and beloved Denton businesses who are just the best at what they do. Here
Business schools and the leadership divide
Despite years of progress on diversity, women remain under-represented in senior business school leadership. Removing the barriers limiting advancement is becoming a strategic priority for institutions seeking stronger leadership, broader talent pipelines and more inclusive decision-making
Jurgen Klopp gives mixed update on Kai Havertz injury
Kai Havertz picked up an injury in Germany’s draw with the Netherlands on Thursday night, undergoing an MRI to assess a suspected hamstring issue.Photo by Lars Baron/Getty ImagesKai Havertz only las...
Ter Stegen hails “unstoppable” Barcelona under Hansi Flick
Marc-André ter Stegen has found regular playing time at Ajax during his loan spell from Barcelona, earning his way back into the starting XI for the German national team.The 34-year-old has been keep...
Pope Leo XIV affirms need for media when asked about Trump ban at White House
Pope Leo XIV told reporters they were welcome to cover him as he responded a question about the Trump administration’s attempt to bar U.S. media from the White House by affirming the importance of...
Pope Leo XIV affirms need for media when asked about Trump ban at White House
Pope Leo XIV told reporters they were welcome to cover him as he responded a question about the Trump administration’s attempt to bar U.S. media from the White House by affirming the importance of...
FA Cup qualifying tie to be replayed after ref's error
Mulbarton Wanderers are "deeply upset" after being told they must replay their FA Cup qualifying tie with Woodford Town because of a referee's error.
Barcelona's Dani Olmo set for Bundesliga return at Bayern?
FC Bayern Munich are apparently taking a closer look at former RB Leipzig talisman Dani Olmo as a future transfer target.According to the British version of Sky Sports, the gifted FC Barcelona star co...
New Bedford’s Cove Walk and Harbor Walk close as businesses prepare for storm
New Bedford’s Cove Walk and Harbor Walk are barricaded as the area braces for a weekend storm, with local businesses preparing for potential flooding and high winds.
Astros at Athletics Game Discussion 9/24/2026
TONIGHT’S GAME: The Houston Astros will continue their final road trip of the regular season with the first game of a four -game series against the Athletics at Sutter Health Park in West Sacramento, CA…RHP Peter Lambert (8-10) will be on the mound for the Astros, opposite RHP Mason Barnett (1-4) and the Athletics. THE […]
Brother of Hayden Panettiere's boyfriend resolves court case after arrest
Zach Hickerson, brother of late actress Hayden Panettiere's boyfriend Brian Hickerson, has resolved a case that landed him behind bars earlier this month.
Eagles’ Backfield Concerns Go Beyond Saquon Barkley
The performance of the Philadelphia Eagles‘ run game has been concerning. Going into Week 3, the health of the backfield adds more worry to the situation. Saquon Barkley is at the top of the pecking order for the Eagles, and he’s been dealing with a stinger. After Tank Bigsby led the Eagles in carries during […] The post Eagles’ Backfield Concerns Go Beyond Saquon Barkley appeared first on HEAVY.
Hannah Einbinder, Susan Sarandon arrested in protest against Netanyahu
Hannah Einbinder and Susan Sarandon were arrested after protesting the arrival of Israeli Prime Minister Benjamin Netanyahu at the United Nations in New York City. Cynthia Nixon, Elliot Page, Indya Moore, Mary Beth Barone, Caleb Hearon and Sarah Sherman were also at the demonstration.
Letter: Ethics of science cannot be separated from who funds it
From Vincent Straub, Interdisciplinary researcher, University of Oxford Nuffield Department of Population Health, Oxford, UK
The Houthis: Iran’s bargaining chip with Washington
The US views talks with the Houthis as a way to contain the scope of the conflict with Iran, while Tehran sees them as a means to translate military gains in the Red Sea into political gains
Meyer and Bar lead Sandwich girls soccer past Monomoy
Recapping Thursday's Cape Cod and Islands high school sports action.
DeVonta Smith Gets Concerning Practice Status Before Bears Game
Firing up the first practice of Week 3 on Thursday, the Philadelphia Eagles were fortunate to see their star running back Saquon Barkley in uniform. However, the same can’t be said for the star wide receiver, DeVonta Smith. DeVonta Smith Gets Concerning Practice Status Before Bears Game After noticing Saquon in pads, with some additional […] The post DeVonta Smith Gets Concerning Practice Status Before Bears Game appeared first on HEAVY.
Eagles Injury Report: DeVonta Smith misses practice, Saquon Barkley limited
The latest news and updates ahead of Week 3.
ECU Health partners with FAA and NCDOT in electric aircraft initiative
ECU Health is teaming up with the FAA and NCDOT to explore how electric aircraft can help break down healthcare barriers.
State and federal barriers complicate homeless outreach in New York
Providers and outreach organizations do much of the work on the ground, but government resources remain a key part of those efforts.
State and federal barriers complicate homeless outreach in New York
Providers and outreach organizations do much of the work on the ground, but government resources remain a key part of those efforts.
Arc Raiders Is Testing a PvE Mode Very Soon
Embark Studios has announced that it will be testing a PvE mode for Arc Raiders next month.
Downtown Round Rock business rebrands as Alcove, opens expansion
The bar and restaurant formerly known as Sociedad rebranded to its original name of Alcove, owner Michelle Ly confirmed in September.